Cell density and airspace patterning in the leaf can be manipulated to increase leaf photosynthetic capacity

High photosynthesis rates in Brassiceae species are mediated by leaf anatomy enabling high biochemical capacity, rapid CO2 diffusion and efficient light use

Certain species in the Brassicaceae family exhibit high photosynthesis rates, potentially providing a valuable route toward improving agricultural productivity. However, factors contributing to their high photosynthesis rates are still unknown. We compared Hirschfeldia incana, Brassica nigra, Brassica rapa and Arabidopsis thaliana, grown under two contrasting light intensities. Hirschfeldia incana matched B. nigra and B. rapa in achieving very high photosynthesis rates under high growth-light condition, outperforming A. thaliana. Photosynthesis was relatively more limited by maximum photosynthesis capacity in H. incana and B. rapa and by mesophyll conductance in A. thaliana and B. nigra. Leaf traits such as greater exposed mesophyll specific surface enabled by thicker leaf or high-density small palisade cells contributed to the variation in mesophyll conductance among the species. The species exhibited contrasting leaf construction strategies and acclimation responses to low light intensity. High-light plants distributed Chl deeper in leaf tissue, ensuring even distribution of photosynthesis capacity, unlike low-light plants. Leaf anatomy of H. incana, B. nigra and B. rapa facilitated effective CO2 diffusion, efficient light use and provided ample volume for their high maximum photosynthetic capacity, indicating that a combination of adaptations is required to increase CO2-assimilation rates in plants.

Instantaneous growth: a compact measure of efficient carbon and nitrogen allocation in leaves and roots of C3 and C4 plants

Elucidating plant functions and identifying crop productivity bottlenecks requires the accurate quantification of their performance. This task has been attained through photosynthetic models. However, their traditional focus on the leaf's capacity to uptake CO2 is becoming increasingly restrictive. Advanced bioengineering of C3 plants has made it possible to increase rates of CO2 assimilation by packing photosynthetic structures more densely within leaves. The operation of mechanisms that concentrate CO2 inside leaves can boost rates of assimilation while requiring a lower investment in carboxylating enzymes. Therefore, whether in the context of spontaneous plants or modern manipulation, considering trade-offs in resource utilization efficiency emerges as a critical necessity. I've developed a concise and versatile analytical model that simulates concurrent leaf and root growth by balancing instantaneous fluxes of carbon and nitrogen. Carbon is made available by leaf photosynthesis, encompassing all types of biochemistries, while nitrogen is either taken up by roots or remobilized after senescence. The allocation of leaf nitrogen between light or carbon reactions was determined using a fitting algorithm: growth maximisation was the only reliable fitting goal. Both the leaf nitrogen pool and the root-to-leaf ratio responded realistically to various environmental drivers (CO2 concentration, light intensity, soil nitrogen), replicating trends typically observed in plants. Furthermore, modifying the strength of CO2 concentrating mechanisms proved sufficient to alter the root-to-leaf ratio between C3 and C4 types. This direct and mechanistic one-to-one link convincingly demonstrates, for the first time, the functional dependence of a morphological trait on a single biochemical property.

Greater mesophyll conductance and leaf photosynthesis in the field through modified cell wall porosity and thickness via AtCGR3 expression in tobacco

Mesophyll conductance (gm) describes the ease with which CO2 passes from the sub-stomatal cavities of the leaf to the primary carboxylase of photosynthesis, Rubisco. Increasing gm is suggested as a means to engineer increases in photosynthesis by increasing [CO2] at Rubisco, inhibiting oxygenation and accelerating carboxylation. Here, tobacco was transgenically up-regulated with Arabidopsis Cotton Golgi-related 3 (CGR3), a gene controlling methylesterification of pectin, as a strategy to increase CO2 diffusion across the cell wall and thereby increase gm. Across three independent events in tobacco strongly expressing AtCGR3, mesophyll cell wall thickness was decreased by 7%-13%, wall porosity increased by 75% and gm measured by carbon isotope discrimination increased by 28%. Importantly, field-grown plants showed an average 8% increase in leaf photosynthetic CO2 uptake. Up-regulating CGR3 provides a new strategy for increasing gm in dicotyledonous crops, leading to higher CO2 assimilation and a potential means to sustainable crop yield improvement.

Beauty is more than epidermis deep: How cell division and expansion sculpt the leaf spongy mesophyll

As the main location of photosynthesis, leaf mesophyll cells are one of the most abundant and essential cell types on earth. Forming the bulk of the internal tissues of the leaf, their size, shape, and patterns of interconnectivity define the internal structure and surface area of the leaf, which in turn determines the efficiency of light capture and carbon fixation. Understanding how these cellular traits are controlled and translated into tissue- and organ-scale traits, and how they influence photosynthetic performance will be key to our ability to improve crop plants in the face of a changing climate. In contrast to the extensive literature on the anatomical and physiological aspects of mesophyll function, our understanding of the cell-level morphogenetic processes underpinning mesophyll cell growth and differentiation is scant. In this review, we focus on how cell division, expansion, and separation are coordinated to create the intricate architecture of the spongy mesophyll.

Structural changes of mesophyll cells in the rice leaf tissue in response to salinity stress based on the three-dimensional analysis

Rice leaf blades have intricate-shaped mesophyll cells (MCs) with a large volume of chloroplasts enhancing gas exchange between stroma and intercellular airspace (IAS). Since the rice MCs do not form palisade or spongy tissue cells and are considered monotypic cells, the structural analysis of MCs in the middle part of the leaf tissue has been done, neglecting the various shapes of MCs can be observed on the cross-section of rice leaves. Moreover, the middle MC layer is sandwiched between the upper and lower layers and is more restricted in its demand for light and CO2 entering from the outside. Therefore, the different layers of MCs may differ in their sensitivity to salt stress that causes structural changes in cells. This study aims to elucidate the intra- and extra-cellular structures of MC in different layers of leaf tissue and determine how salinity affects the MC structure in each layer. The mesophyll tissue was divided into adaxial, middle and abaxial layers, and eight MCs and chloroplast regions were selected from each layer and reconstructed into three-dimensional (3D) representations. The whole leaf anatomical and physiological parameters were measured to find the effects of salinity stress on the MC structures. As a result, the 3D analysis of rice leaf tissue revealed the different structures of MCs with greater diversity in the adaxial and abaxial layers than in the middle layer. Salinity stress reduced the size and height of the MCs and coverage of the chloroplast on the cytoplasm periphery of the adaxial and abaxial layers, as well as the chloroplast size of adaxial MCs. Overall, these results reveal the variation of rice MC in leaf tissue and suggest the higher sensitivity to salt stress in the adaxial mesophyll among the layers, which may partly account for the decrease in photosynthetic capacity.

Automatic 3D cell segmentation of fruit parenchyma tissue from X-ray micro CT images using deep learning

BACKGROUND

High quality 3D information of the microscopic plant tissue morphology-the spatial organization of cells and intercellular spaces in tissues-helps in understanding physiological processes in a wide variety of plants and tissues. X-ray micro-CT is a valuable tool that is becoming increasingly available in plant research to obtain 3D microstructural information of the intercellular pore space and individual pore sizes and shapes of tissues. However, individual cell morphology is difficult to retrieve from micro-CT as cells cannot be segmented properly due to negligible density differences at cell-to-cell interfaces. To address this, deep learning-based models were trained and tested to segment individual cells using X-ray micro-CT images of parenchyma tissue samples from apple and pear fruit with different cell and porosity characteristics.

RESULTS

The best segmentation model achieved an Aggregated Jaccard Index (AJI) of 0.86 and 0.73 for apple and pear tissue, respectively, which is an improvement over the current benchmark method that achieved AJIs of 0.73 and 0.67. Furthermore, the neural network was able to detect other plant tissue structures such as vascular bundles and stone cell clusters (brachysclereids), of which the latter were shown to strongly influence the spatial organization of pear cells. Based on the AJIs, apple tissue was found to be easier to segment, as the porosity and specific surface area of the pore space are higher and lower, respectively, compared to pear tissue. Moreover, samples with lower pore network connectivity, proved very difficult to segment.

CONCLUSIONS

The proposed method can be used to automatically quantify 3D cell morphology of plant tissue from micro-CT instead of opting for laborious manual annotations or less accurate segmentation approaches. In case fruit tissue porosity or pore network connectivity is too low or the specific surface area of the pore space too high, native X-ray micro-CT is unable to provide proper marker points of cell outlines, and one should rely on more elaborate contrast-enhancing scan protocols.

Increased stomatal conductance and leaf biochemical capacity, not mesophyll conductance, contributing to the enhanced photosynthesis in Oryza plants during domestication

MAIN CONCLUSION

Leaf biochemical capacity and the ratio of leaf biochemical capacity to stomatal conductance are promising to enhance leaf photosynthetic rate and water use efficiency in rice plants, respectively. Domestication may have great impact on crop photosynthetic rate, which has not been fully understood, especially from the perspective of stomatal conductance, mesophyll conductance, and leaf biochemical capacity simultaneously. In this study, we constructed a database consisting of 141 and 92 sets of data from wild and cultivated rice, respectively, including leaf gas exchange parameters, hydraulic conductance, structural traits, and nitrogen content. We found that, compared to wild rice, enhanced leaf photosynthetic rate in cultivated rice was mainly resulted by the increased stomatal conductance and leaf biochemical capacity, rather than mesophyll conductance. The unchanged mesophyll conductance observed during domestication suggested that it might have been optimized during plant evolution in wild rice. Additionally, the positive relationship between stomatal density and stomatal conductance disappeared in Oryza plants during domestication, suggesting that stomatal conductance in cultivated rice is less restricted by stomatal density, compared to wild rice. Moreover, in both wild and cultivated rice, leaf photosynthetic rate was mainly determined by leaf biochemical capacity, rather than stomatal conductance and mesophyll conductance. This study highlighted the important role of stomatal conductance and leaf biochemical capacity in improvement of leaf photosynthetic rate in rice during domestication. Leaf biochemical capacity and the ratio of leaf biochemical capacity to stomatal conductance should be further investigated to enhance leaf photosynthetic rate and water use efficiency in rice plants, respectively.

Conserved cellular patterning in the mesophyll of rice leaves

The mesophyll cells of grass leaves, such as rice, are traditionally viewed as displaying a relatively uniform pattern, in contrast to the clear distinctions of palisade and spongy layers in typical eudicot leaves. This quantitative analysis of mesophyll cell size and shape in rice leaves reveals that there is an inherent pattern in which cells in the middle layer of the mesophyll are larger and less circular and have a distinct orientation of their long axis compared to mesophyll cells in other layers. Moreover, this pattern was observed in a range of rice cultivars and species. The significance of this pattern with relation to potential photosynthetic function and the implication of the widespread use of middle layer mesophyll cells as typical of the rice leaf have been investigated and discussed.

A quantitative morphospace of multicellular organ design in the plant Arabidopsis

Organ function emerges from the interactions between their constituent cells. The investigation of cellular organization can provide insight into organ function following structure-function relationships. Here, we investigate the extent to which properties in cellular organization can arise "for free" as an emergent property of embedding cells in space versus those that are actively generated by patterning processes. Default cellular configurations were established using three-dimensional (3D) digital tissue models. Network-based analysis of these synthetic cellular assemblies established a quantitative topological baseline of cellular organization, granted by virtue of passive spatial packing and the minimal amount of order that emerges for free in tessellated tissues. A 3D cellular-resolution digital tissue atlas for the model plant species Arabidopsis was generated, and the extent to which the organs in this organism conform to the default configurations was established through statistical comparisons with digital tissue models. Cells in different tissues of Arabidopsis do not conform to random packing arrangements to varying degrees. Most closely matching the random models was the undifferentiated shoot apical meristem (SAM) from which aerial organs emanate. By contrast, leaf and sepal tissue showed the greatest deviation from this baseline, suggesting these to be the most "complex" tissues in Arabidopsis. Investigation of the patterning principles responsible for the gap between these tissues and default patterns revealed cell elongation and the introduction of air spaces to contribute toward additional organ patterning complexity. This work establishes a quantitative morphospace to understand the principles of organ construction and its diversity within a single organism.

Integrating ATAC-seq and RNA-seq to identify differentially expressed genes with chromatin-accessible changes during photosynthetic establishment in Populus leaves

Leaves are the primary photosynthetic organs, providing essential substances for tree growth. It is important to obtain an anatomical understanding and regulatory network analysis of leaf development. Here, we studied leaf development in Populus Nanlin895 along a development gradient from the newly emerged leaf from the shoot apex to the sixth leaf (L1 to L6) using anatomical observations and RNA-seq analysis. It indicated that mesophyll cells possess obvious vascular, palisade, and spongy tissue with distinct intercellular spaces after L3. Additionally, vacuoles fuse while epidermal cells expand to form pavement cells. RNA-seq analysis indicated that genes highly expressed in L1 and L2 were related to cell division and differentiation, while those highly expressed in L3 were enriched in photosynthesis. Therefore, we selected L1 and L3 to integrate ATAC-seq and RNA-seq and identified 735 differentially expressed genes (DEGs) with changes in chromatin accessibility regions within their promoters, of which 87 were transcription factors (TFs), such as ABI3VP1, AP-EREBP, MYB, NAC, and GRF. Motif enrichment analysis revealed potential regulatory functions for the DEGs through upstream TFs including TCP, bZIP, HD-ZIP, Dof, BBR-BPC, and MYB. Overall, our research provides a potential molecular foundation for regulatory network exploration in leaf development during photosynthesis establishment.

Creating a virtual leaf

When microscopy meets modelling the exciting concept of a 'virtual leaf' is born. The goal of a 'virtual leaf' is to capture complex physiology in a virtual environment, resulting in the capacity to run experiments computationally. One example of a 'virtual leaf' application is capturing 3D anatomy from volume microscopy data and estimating where water evaporates in the leaf and the proportions of apoplastic, symplastic and gas phase water transport. The same 3D anatomy could then be used to improve established 3D reaction-diffusion models, providing a better understanding of the transport of CO₂ across the stomata, through the airspace and across the mesophyll cell wall. This viewpoint discusses recent progress that has been made in transitioning from a bulk leaf approach to a 3D understanding of leaf physiology, in particular, the movement of CO₂ and H₂O within the leaf.

Research Progress in Improving Photosynthetic Efficiency

Photosynthesis is the largest mass- and energy-conversion process on Earth, and it is the material basis for almost all biological activities. The efficiency of converting absorbed light energy into energy substances during photosynthesis is very low compared to theoretical values. Based on the importance of photosynthesis, this article summarizes the latest progress in improving photosynthesis efficiency from various perspectives. The main way to improve photosynthetic efficiency is to optimize the light reactions, including increasing light absorption and conversion, accelerating the recovery of non-photochemical quenching, modifying enzymes in the Calvin cycle, introducing carbon concentration mechanisms into C₃ plants, rebuilding the photorespiration pathway, de novo synthesis, and changing stomatal conductance. These developments indicate that there is significant room for improvement in photosynthesis, providing support for improving crop yields and mitigating changes in climate conditions.

Mass screening of rice mutant populations at low CO2 for identification of lowered photorespiration and respiration rates

INTRODUCTION

Identifying rice (Oryza sativa) germplasm with improved efficiency of primary metabolism is of utmost importance in order to increase yields. One such approach can be attained through screening genetically diverse populations under altered environmental conditions. Growth or treatment under low carbon dioxide (CO₂) concentrations can be used as a means of revealing altered leaf photorespiration, respiration and other metabolic variants.

METHODS

We developed a pipeline for very high throughput treatment of gamma- and ethyl methanesulfonate- (EMS) induced mutant populations of IR64 rice seedlings at very low CO₂ for 7 days. 1050 seedlings per batch at 5^th leaf stage were exposed to 60 ppm CO₂ for the first day and 30 ppm for the remaining three days. Following this, putative candidates were identified by measuring chlorophyll depletion using SPAD. Screening results showed a distinct difference between the mutants and the WTs.

RESULTS AND DISCUSSION

The mean chlorophyll loss in WTs ranged from 65% to 11% respectively, whereas in the mutant lines chlorophyll loss ranged from 0 to 100%, suggesting considerable phenotypic variation. Rice mutants with a reduced chlorophyll reduction (<10%) were identified as 'Chlorophyll retention mutants' (CRMs) under low CO₂ stress. In total, 1909 mutant lines (14,000 seedlings) were screened for chlorophyll content under 30 ppm CO_2, with 26 lines selected for detailed screening. These 26 putative candidates were self-seeded to produce an M₅ generation, used to determine the genetic control of the altered response to low CO_2. Gas exchange of light and CO₂ response revealed that there were significant variations among photosynthetic properties in two selected rice mutants. The CO₂ compensation points in the absence of photorespiration and leaf respiration rates were lower than the WTs and anatomical analyses showed that CRM 29 had improved mesophyll cell area. We propose that this approach is useful for generating new material for breeding rice with improved primary metabolism.

Different photoprotective strategies for white leaves between two co-occurring Actinidia species

At the outer canopy, the white leaves of Actinidia kolomikta can turn pink but they stay white in A. polygama. We hypothesized that the different leaf colors in the two Actinidia species may represent different photoprotection strategies. To test the hypothesis, leaf optical spectra, anatomy, chlorophyll a fluorescence, superoxide (O₂ ˙^- ) concentration, photosystem II photo-susceptibility, and expression of anthocyanin-related genes were investigated. On the adaxial side, light reflectance was the highest for white leaves of A. kolomikta, followed by its pink leaves and white leaves of A. polygama, and the absorptance for white leaves of A. kolomikta was the lowest. Chlorophyll and carotenoid content of white and pink leaves in A. kolomikta were significantly lower than those of A. polygama, while the relative anthocyanin content of pink leaves was the highest. Chloroplasts of palisade cells of white leaves in A. kolomikta were not well developed with a lower maximum quantum efficiency of PSII than the other types of leaves (pink leaves of A. kolomikta and white leaves of A. Polygama at the inner/outer canopy). After high light treatment from the abaxial surface, F_v /F_m decreased to a larger extent for white leaves of A. kolomikta than pink leaf and white leaves of A. polygama, and its non-photochemical quenching was also the lowest. White leaves of A. kolomikta showed higher O₂ ˙^- concentration compared to pink leaves under the same strong irradiance. The expression levels of anthocyanin biosynthetic genes in pink leaves were higher than in white leaves. These results indicate that white leaves of A. kolomikta apply a reflection strategy for photoprotection, while pink leaves resist photoinhibition via anthocyanin accumulation.

Analyzing anatomy over three dimensions unpacks the differences in mesophyll diffusive area between sun and shade Vitis vinifera leaves

Leaves grown at different light intensities exhibit considerable differences in physiology, morphology and anatomy. Because plant leaves develop over three dimensions, analyses of the leaf structure should account for differences in lengths, surfaces, as well as volumes. In this manuscript, we set out to disentangle the mesophyll surface area available for diffusion per leaf area (S m,LA) into underlying one-, two- and three-dimensional components. This allowed us to estimate the contribution of each component to S m,LA, a whole-leaf trait known to link structure and function. We introduce the novel concept of a 'stomatal vaporshed,' i.e. the intercellular airspace unit most closely connected to a single stoma, and use it to describe the stomata-to-diffusive-surface pathway. To illustrate our new theoretical framework, we grew two cultivars of Vitis vinifera L. under high and low light, imaged 3D leaf anatomy using microcomputed tomography (microCT) and measured leaf gas exchange. Leaves grown under high light were less porous and thicker. Our analysis showed that these two traits and the lower S m per mesophyll cell volume (S m,Vcl) in sun leaves could almost completely explain the difference in S m,LA. Further, the studied cultivars exhibited different responses in carbon assimilation per photosynthesizing cell volume (A Vcl). While Cabernet Sauvignon maintained A Vcl constant between sun and shade leaves, it was lower in Blaufränkisch sun leaves. This difference may be related to genotype-specific strategies in building the stomata-to-diffusive-surface pathway.

A 'wiring diagram' for source strength traits impacting wheat yield potential

Source traits are currently of great interest for the enhancement of yield potential; for example, much effort is being expended to find ways of modifying photosynthesis. However, photosynthesis is but one component of crop regulation, so sink activities and the coordination of diverse processes throughout the crop must be considered in an integrated, systems approach. A set of 'wiring diagrams' has been devised as a visual tool to integrate the interactions of component processes at different stages of wheat development. They enable the roles of chloroplast, leaf, and whole-canopy processes to be seen in the context of sink development and crop growth as a whole. In this review, we dissect source traits both anatomically (foliar and non-foliar) and temporally (pre- and post-anthesis), and consider the evidence for their regulation at local and whole-plant/crop levels. We consider how the formation of a canopy creates challenges (self-occlusion) and opportunities (dynamic photosynthesis) for components of photosynthesis. Lastly, we discuss the regulation of source activity by feedback regulation. The review is written in the framework of the wiring diagrams which, as integrated descriptors of traits underpinning grain yield, are designed to provide a potential workspace for breeders and other crop scientists that, along with high-throughput and precision phenotyping data, genetics, and bioinformatics, will help build future dynamic models of trait and gene interactions to achieve yield gains in wheat and other field crops.

3-D reconstruction of rice leaf tissue for proper estimation of surface area of mesophyll cells and chloroplasts facing intercellular airspaces from 2-D section images

BACKGROUND AND AIMS

The surface area of mesophyll cells (Smes) and chloroplasts (Sc) facing the intercellular airspace (IAS) are important parameters for estimating photosynthetic activity from leaf anatomy. Although Smes and Sc are estimated based on the shape assumption of mesophyll cells (MCs), it is questionable if the assumption is correct for rice MCs with concave-convex surfaces. Therefore, in this study, we establish a reconstruction method for the 3-D representation of the IAS in rice leaf tissue to calculate the actual Smes and Sc with 3-D images and to determine the correct shape assumption for the estimation of Smes and Sc based on 2-D section images.

METHODS

We used serial section light microscopy to reconstruct 3-D representations of the IAS, MCs and chloroplasts in rice leaf tissue. Actual Smes and Sc values obtained from the 3-D representation were compared with those estimated from the 2-D images to find the correct shape-specific assumption (oblate or prolate spheroid) in different orientations (longitudinal and transverse sections) using the same leaf sample.

KEY RESULTS

The 3-D representation method revealed that volumes of the IAS and MCs accounted for 30 and 70 % of rice leaf tissue excluding epidermis, respectively, and the volume of chloroplasts accounted for 44 % of MCs. The shape-specific assumption on the sectioning orientation affected the estimation of Smes and Sc using 2-D section images with discrepancies of 10-38 %.

CONCLUSIONS

The 3-D representation of rice leaf tissue was successfully reconstructed using serial section light microscopy and suggested that estimation of Smes and Sc of the rice leaf is more accurate using longitudinal sections with MCs assumed as oblate spheroids than using transverse sections with MCs as prolate spheroids.

Localized growth and remodelling drives spongy mesophyll morphogenesis

The spongy mesophyll is a complex, porous tissue found in plant leaves that enables carbon capture and provides mechanical stability. Unlike many other biological tissues, which remain confluent throughout development, the spongy mesophyll must develop from an initially confluent tissue into a tortuous network of cells with a large proportion of intercellular airspace. How the airspace in the spongy mesophyll develops while the tissue remains mechanically stable is unknown. Here, we use computer simulations of deformable polygons to develop a purely mechanical model for the development of the spongy mesophyll tissue. By stipulating that cell wall growth and remodelling occurs only near void space, our computational model is able to recapitulate spongy mesophyll development observed in Arabidopsis thaliana leaves. We find that robust generation of pore space in the spongy mesophyll requires a balance of cell growth, adhesion, stiffness and tissue pressure to ensure cell networks become porous yet maintain mechanical stability. The success of this mechanical model of morphogenesis suggests that simple physical principles can coordinate and drive the development of complex plant tissues like the spongy mesophyll.

Variation of photosynthesis during plant evolution and domestication: implications for improving crop photosynthesis

Studies investigating the mechanisms underlying the variation of photosynthesis along plant phylogeny and especially during domestication are of great importance, and may provide new insights to further improve crop photosynthesis. In the present study, we compiled a database including 542 sets of data of leaf gas exchange parameters and leaf structural and chemical traits in ferns and fern allies, gymnosperms, non-crop angiosperms, and crops. We found that photosynthesis was dramatically improved from ferns and fern allies to non-crop angiosperms, and further increased in crops. The improvement of photosynthesis during phylogeny and domestication was related to increases in carbon dioxide diffusional capacities and, to a lesser extent, biochemical capacity. Cell wall thickness rather than chloroplast surface area facing intercellular airspaces drives the variation of mesophyll conductance. The variation of the maximum carboxylation rate was not related to leaf nitrogen content. The slope of the relationship between mass-based photosynthesis and nitrogen was lower in crops than in non-crop angiosperms. These findings suggest that the manipulation of cell wall thickness is the most promising approach to further improve crop photosynthesis, and that an increase of leaf nitrogen will be less efficient in improving photosynthesis in crops than in non-crop angiosperms.

Canopy nitrogen addition enhance the photosynthetic rate of canopy species by improving leaf hydraulic conductivity in a subtropical forest

Elucidating the effects of atmospheric nitrogen (N) deposition on the photosynthetic capacity of plants is critical to understand forest growth and conservation under global change. However, studies on this topic generally consider only understory N addition, which ignores the effect of canopy interception. In this study, we conducted a field experiment in a subtropical forest to compare the effects of canopy vs. understory N addition on the photosynthetic rate of canopy and understory species. We found that canopy N addition enhanced the photosynthetic rate of canopy species by increasing leaf hydraulic conductivity and shortening the distance of CO₂ transportation. In contrast, understory N addition had non-significant effects on the photosynthetic rate of canopy species. Moreover, the photosynthetic rate of understory species was not affected by canopy or understory N addition. Interestingly, changes in hydraulic conductivity contributed more to accelerating the photosynthetic rate than changes in CO₂ transport distance. Our results provide important insights into the dissimilar effects of canopy and understory N addition on the photosynthetic rates of species in subtropical forests. Based on our findings, we highlighted the urgent need to consider canopy processes in future studies on N deposition.

Structural and functional leaf diversity lead to variability in photosynthetic capacity across a range of Juglans regia genotypes

Similar to other cropping systems, few walnut cultivars are used as scion in commercial production. Germplasm collections can be used to diversify cultivar options and hold potential for improving crop productivity, disease resistance and stress tolerance. In this study, we explored the anatomical and biochemical bases of photosynthetic capacity and response to water stress in 11 Juglans regia accessions in the U.S. department of agriculture, agricultural research service (USDA-ARS) National Clonal Germplasm. Net assimilation rate (An ) differed significantly among accessions and was greater in lower latitudes coincident with higher stomatal and mesophyll conductances, leaf thickness, mesophyll porosity, gas-phase diffusion, leaf nitrogen and lower leaf mass and stomatal density. High CO2 -saturated assimilation rates led to increases in An under diffusional and biochemical limitations. Greater An was found in lower-latitude accessions native to climates with more frost-free days, greater precipitation seasonality and lower temperature seasonality. As expected, water stress consistently impaired photosynthesis with the highest % reductions in lower-latitude accessions (A3, A5 and A9), which had the highest An under well-watered conditions. However, An for A3 and A5 remained among the highest under dehydration. J. regia accessions, which have leaf structural traits and biochemistry that enhance photosynthesis, could be used as commercial scions or breeding parents to enhance productivity.

The structural correlations and the physiological functions of stomatal morphology and leaf structures in C3 annual crops

This study suggests that stomatal and leaf structures are highly correlated, and mesophyll cell size is an important anatomical trait determining the coordination between stomatal size and mesophyll porosity. A comprehensive study of the correlations between the structural traits and on their relationships with gas exchange parameters may provide some useful information into leaf development and improvement in efficiencies of photosynthetic CO₂ fixation and transpirational water loss. In the present study, nine plant materials from eight crop species were pot grown in a growth chamber. Leaf structural traits, gas exchange, and leaf nitrogen content were measured. We found that stomatal size, mesophyll cell size (MCS), and mesophyll porosity were positively correlated and that the surface areas of mesophyll cells and chloroplasts facing intercellular air spaces were positively correlated with both stomatal density and stomatal area per leaf area (SA). These results suggested that the developments of stomata and mesophyll cells are highly correlated among different crop species. Additionally, MCS was positively correlated with leaf thickness and negatively correlated with leaf density and leaf mass per area, which indicated that MCS might play an important role in leaf structural investments and physiological functions among species. In summary, this study illustrates the correlations between stomatal and mesophyll structures, and it highlights the importance of considering the covariations among leaf traits with the intent of improving photosynthesis and iWUE.

Higher CO2 Assimilation in Selected Rice Recombinant Inbred Lines Is Driven by Higher CO2 Diffusion and Light Use Efficiency Related to Leaf Anatomy and Mesophyll Cell Density

Leaf anatomy determining the light distribution within the leaf and exerting influence on CO₂ diffusion is considered to have dramatic potential for photosynthesis performance increase. In this study, we observed that two rice recombinant inbred lines, H138 and H217 (RILF₁₁ plants from Sasanishiki × IRAT10), have higher net CO₂ assimilation (An) than their parent Sasanishiki due mainly to the improvement of leaf anatomy. Our results showed that An positively correlated with anatomy traits' mesophyll cell number per cross-sectional area (NO_.mescell/A_cros) and mesophyll area (A_mes). NO._mescell/A_cros exert direct and indirect effects on An. Compared to Sasanishiki flag leaves, IRAT10, H138, and H217 have higher mesophyll cell numbers. Simultaneously, higher chlorophyll content and expression of genes encoding the light-harvesting protein of PSII and PSI (Lhcb1, 2, 3 and Lhca1, 2, 3) were recorded in IRAT10, H138, and H217, which facilitates light use efficiency. Higher electron transport rate and RuBP concentration were recorded in IRAT10, H138, and H217 flag leaves. Retinoblastoma-related gene (OsRBR1), exerting effects on mesophyll cell density, can be used to modify leaf anatomy for improving leaf photosynthesis. Additionally, higher stomatal conductance and mesophyll conductance were also recorded in H138 and H217 than in Sasanishiki. Furthermore, we modeled mesophyll conductance through anatomical traits, and the results revealed that chloroplast thickness was the dominant factor restricting CO₂ diffusion within mesophyll cells rather than cell wall thickness. Higher RuBP content accompanied by higher CO₂ concentration within the carboxylation set in H138 and H217 flag leaves contributed to higher CO₂ assimilation.

Structural organization of the spongy mesophyll

Many plant leaves have two layers of photosynthetic tissue: the palisade and spongy mesophyll. Whereas palisade mesophyll consists of tightly packed columnar cells, the structure of spongy mesophyll is not well characterized and often treated as a random assemblage of irregularly shaped cells. Using micro-computed tomography imaging, topological analysis, and a comparative physiological framework, we examined the structure of the spongy mesophyll in 40 species from 30 genera with laminar leaves and reticulate venation. A spectrum of spongy mesophyll diversity encompassed two dominant phenotypes: first, an ordered, honeycomblike tissue structure that emerged from the spatial coordination of multilobed cells, conforming to the physical principles of Euler's law; and second, a less-ordered, isotropic network of cells. Phenotypic variation was associated with transitions in cell size, cell packing density, mesophyll surface-area-to-volume ratio, vein density, and maximum photosynthetic rate. These results show that simple principles may govern the organization and scaling of the spongy mesophyll in many plants and demonstrate the presence of structural patterns associated with leaf function. This improved understanding of mesophyll anatomy provides new opportunities for spatially explicit analyses of leaf development, physiology, and biomechanics.

Riddled with holes: Understanding air space formation in plant leaves

Plants use energy from sunlight to transform carbon dioxide from the air into complex organic molecules, ultimately producing much of the food we eat. To make this complex chemistry more efficient, plant leaves are intricately constructed in 3 dimensions: They are flat to maximise light capture and contain extensive internal air spaces to increase gas exchange for photosynthesis. Many years of work has built up an understanding of how leaves form flat blades, but the molecular mechanisms that control air space formation are poorly understood. Here, I review our current understanding of air space formation and outline how recent advances can be harnessed to answer key questions and take the field forward. Increasing our understanding of plant air spaces will not only allow us to understand a fundamental aspect of plant development, but also unlock the potential to engineer the internal structure of crops to make them more efficient at photosynthesis with lower water requirements and more resilient in the face of a changing environment.

Leaves are interwoven with large air spaces to increase the efficiency of photosynthesis; however, how these air spaces form and how different patterns have evolved is almost unknown. This Unsolved Mystery article discusses the existing evidence and poses new avenues of research to answer this question.

Spectral effects of blue and red light on growth, anatomy, and physiology of lettuce

Characterizing spectral effects of blue and red light ratios on plants could help expand our understanding of factors that regulate growth and development, which is becoming increasingly important as narrowband light-emitting diodes become common for sole-source lighting. Herein we report growth, physiological, and anatomical responses of two lettuce cultivars grown indoors under various blue and red ratios including monochromatic treatments. When used in combination with red, increasing the proportion of blue light generally reduced growth but increased chloroplast abundance and single-leaf photosynthetic efficiency. However, when used as single wavebands, both blue and red light increased leaf area and epidermal cell area, but reduced root dry mass, SPAD index, stomatal density, and leaf thickness compared to dichromatic light. In addition, chloroplast abundance and single-leaf physiological responses were higher in plants grown under monochromatic blue compared to red light, but the opposite trend was measured for shoot biomass. Our results show that spectral effects on morpho-anatomical leaf responses can largely influence plant growth and single-leaf physiological responses. However, a significant blue light reduction in radiation capture ultimately limits growth and productivity of lettuce plants when dichromatic blue and red light is used.

Understanding airspace in leaves: 3D anatomy and directional tortuosity

The leaf intercellular airspace is a tortuous environment consisting of cells of different shapes, packing densities, and orientation, all of which have an effect on the travelling distance of molecules from the stomata to the mesophyll cell surfaces. Tortuosity, the increase in displacement over the actual distance between two points, is typically defined as encompassing the whole leaf airspace, but heterogeneity in pore dimensions and orientation between the spongy and palisade mesophyll likely result in heterogeneity in tortuosity along different axes and would predict longer traveling distance along the path of least tortuosity, such as vertically within the columnar cell matrix of the palisade layer. Here, we compare a previously established geometric method to a random walk approach, novel for this analysis in plant leaves, in four different Eucalyptus species. The random walk method allowed us to quantify directional tortuosity across the whole leaf profile, and separately for the spongy and palisade mesophyll. For all species tortuosity was higher in the palisade mesophyll than the spongy mesophyll and horizontal (parallel to the epidermis) tortuosity was consistently higher than vertical (from epidermis to epidermis) tortuosity. We demonstrate that a random walk approach improves on previous geometric approaches and is valuable for investigating CO₂ and H₂ O transport within leaves.

Cell wall thickness and composition are involved in photosynthetic limitation

The key role of cell walls in setting mesophyll conductance to CO2 (gm) and, consequently, photosynthesis is reviewed. First, the theoretical properties of cell walls that can affect gm are presented. Then, we focus on cell wall thickness (Tcw) reviewing empirical evidence showing that Tcw varies strongly among species and phylogenetic groups in a way that correlates with gm and photosynthesis; that is, the thicker the mesophyll cell walls, the lower the gm and photosynthesis. Potential interplays of gm, Tcw, dehydration tolerance, and hydraulic properties of leaves are also discussed. Dynamic variations of Tcw in response to the environment and their implications in the regulation of photosynthesis are discussed, and recent evidence suggesting an influence of cell wall composition on gm is presented. We then propose a hypothetical mechanism for the influence of cell walls on photosynthesis, combining the effects of thickness and composition, particularly pectins. Finally, we discuss the prospects for using biotechnology for enhancing photosynthesis by altering cell wall-related genes.

Ploidy influences wheat mesophyll cell geometry, packing and leaf function

Leaf function is influenced by leaf structure, which is itself related not only to the spatial arrangement of constituent mesophyll cells, but also their size and shape. In this study, we used confocal microscopy to image leaves of Triticum genotypes varying in ploidy level to extract 3D information on individual mesophyll cell size and geometry. Combined with X-ray Computed Tomography and gas exchange analysis, the effect of changes in wheat mesophyll cell geometry upon leaf structure and function were investigated. Mesophyll cell size and shape were found to have changed during the course of wheat evolution. An unexpected linear relationship between mesophyll cell surface area and volume was discovered, suggesting anisotropic scaling of mesophyll cell geometry with increasing ploidy. Altered mesophyll cell size and shape were demonstrated to be associated with changes in mesophyll tissue architecture. Under experimental growth conditions, CO2 assimilation did not vary with ploidy, but stomatal conductance was lower in hexaploid plants, conferring a greater instantaneous water-use efficiency. We propose that as wheat mesophyll cells have become larger with increased ploidy, this has been accompanied by changes in cell geometry and packing which limit water loss while maintaining carbon assimilation.

Recent advances in understanding and improving photosynthesis

Since 1893, when the word "photosynthesis" was first coined by Charles Reid Barnes and Conway MacMillan, our understanding of the elements and regulation of this complex process is far from being entirely understood. We aim to review the most relevant advances in photosynthesis research from the last few years and to provide a perspective on the forthcoming research in this field. Recent discoveries related to light sensing, harvesting, and dissipation; kinetics of CO₂ fixation; components and regulators of CO₂ diffusion through stomata and mesophyll; and genetic engineering for improving photosynthetic and production capacities of crops are addressed.

Maximum CO2 diffusion inside leaves is limited by the scaling of cell size and genome size

Maintaining high rates of photosynthesis in leaves requires efficient movement of CO2 from the atmosphere to the mesophyll cells inside the leaf where CO2 is converted into sugar. CO2 diffusion inside the leaf depends directly on the structure of the mesophyll cells and their surrounding airspace, which have been difficult to characterize because of their inherently three-dimensional organization. Yet faster CO2 diffusion inside the leaf was probably critical in elevating rates of photosynthesis that occurred among angiosperm lineages. Here we characterize the three-dimensional surface area of the leaf mesophyll across vascular plants. We show that genome size determines the sizes and packing densities of cells in all leaf tissues and that smaller cells enable more mesophyll surface area to be packed into the leaf volume, facilitating higher CO2 diffusion. Measurements and modelling revealed that the spongy mesophyll layer better facilitates gaseous phase diffusion while the palisade mesophyll layer better facilitates liquid-phase diffusion. Our results demonstrate that genome downsizing among the angiosperms was critical to restructuring the entire pathway of CO2 diffusion into and through the leaf, maintaining high rates of CO2 supply to the leaf mesophyll despite declining atmospheric CO2 levels during the Cretaceous.

Variation in key leaf photosynthetic traits across wheat wild relatives is accession dependent not species dependent

The wild relatives of modern wheat represent an underutilized source of genetic and phenotypic diversity and are of interest in breeding owing to their wide adaptation to diverse environments. Leaf photosynthetic traits underpin the rate of production of biomass and yield and have not been systematically explored in the wheat relatives. This paper identifies and quantifies the phenotypic variation in photosynthetic, stomatal, and morphological traits in up to 88 wheat wild relative accessions across five genera. Both steady-state measurements and dynamic responses to step changes in light intensity are assessed. A 2.3-fold variation for flag leaf light and CO₂ -saturated rates of photosynthesis A_max was observed. Many accessions showing higher and more variable A_max , maximum rates of carboxylation, electron transport, and Rubisco activity when compared with modern genotypes. Variation in dynamic traits was also significant; with distinct genus-specific trends in rates of induction of nonphotochemical quenching and rate of stomatal opening. We conclude that utilization of wild relatives for improvement of photosynthesis is supported by the existence of a high degree of natural variation in key traits and should consider not only genus-level properties but variation between individual accessions.

Nutrition-mediated cell and tissue-level anatomy triggers the covariation of leaf photosynthesis and leaf mass per area

Plants in nutrient-poor habitats converge towards lower rates of leaf net CO2 assimilation (Aarea); however, they display variability in leaf mass investment per area (LMA). How a plant optimizes its leaf internal carbon investment may have knock-on effects on structural traits and, in turn, affect leaf carbon fixation. Quantitative models were applied to evaluate the structural causes of variations in LMA and their relevance to Aarea in rapeseed (Brassica napus) based on their responses to nitrogen (N), phosphorus (P), potassium (K), and boron (B) deficiencies. Leaf carbon fixation decreased in response to nutrient deficiency, but the photosynthetic limitations varied greatly depending on the deficient nutrient. In comparison with Aarea, the LMA exhibited diverse responses, being increased under P or B deficiency, decreased under K deficiency, and unaffected under N deficiency. These variations were due to changes in cell- and tissue-level carbon investments between cell dry mass density (N or K deficiency) and cellular anatomy, including cell dimension and number (P deficiency), or both (B deficiency). However, there was a conserved pattern independent of nutrient-specific limitations-low nutrient availability reduced leaf carbon fixation but increased carbon investment in non-photosynthetic structures, resulting in larger but fewer mesophyll cells with a thicker cell wall but a lower chloroplast surface area appressed to the intercellular airspace, which reduced the mesophyll conductance and feedback-limited Aarea. Our results provide insight into the importance of mineral nutrients in balancing the leaf carbon economy by coordinating leaf carbon assimilation and internal distribution.

Roles of plant retinoblastoma protein: cell cycle and beyond

The human retinoblastoma (RB1) protein is a tumor suppressor that negatively regulates cell cycle progression through its interaction with members of the E2F/DP family of transcription factors. However, RB-related (RBR) proteins are an early acquisition during eukaryote evolution present in plant lineages, including unicellular algae, ancient plants (ferns, lycophytes, liverworts, mosses), gymnosperms, and angiosperms. The main RBR protein domains and interactions with E2Fs are conserved in all eukaryotes and not only regulate the G1/S transition but also the G2/M transition, as part of DREAM complexes. RBR proteins are also important for asymmetric cell division, stem cell maintenance, and the DNA damage response (DDR). RBR proteins play crucial roles at every developmental phase transition, in association with chromatin factors, as well as during the reproductive phase during female and male gametes production and embryo development. Here, we review the processes where plant RBR proteins play a role and discuss possible avenues of research to obtain a full picture of the multifunctional roles of RBR for plant life.

Water Shortage Strongly Alters Formation of Calcium Oxalate Druse Crystals and Leaf Traits in Fagopyrum esculentum

Common buckwheat (Fagopyrum esculentum Moench) is a robust plant with high resistance to different environmental constraints. It contains high levels of calcium oxalate (CaOx) druse crystals, although their role remains obscure. The objective was to examine the effects of water shortage on plant biomass partition and leaf traits and formation of CaOx druse crystals in common buckwheat. Buckwheat plants were exposed to favorable and reduced water availability for 28 days. The element composition and morphological, biochemical, physiological and optical traits of the leaves, and the plant biomass were investigated under these conditions. Measurements of photochemical efficiency of photosystem II showed undisturbed functioning for buckwheat exposed to water shortage, apparently due to partially closed stomata and more efficient water regulation. Strong relationships were seen between water-related parameters and Ca, Mn and S content, and size and density of CaOx druse crystals. Redundancy analysis revealed the importance of the size of CaOx druse crystals to explain reflection in the UV range. Water shortage resulted in shorter plants with the same leaf mass (i.e., increased mass:height ratio), which, together with denser leaf tissue and higher content of photosynthetic pigments and protective substances, provides an advantage under extreme weather conditions.

Digitally deconstructing leaves in 3D using X-ray microcomputed tomography and machine learning

PREMISE

X-ray microcomputed tomography (microCT) can be used to measure 3D leaf internal anatomy, providing a holistic view of tissue organization. Previously, the substantial time needed for segmenting multiple tissues limited this technique to small data sets, restricting its utility for phenotyping experiments and limiting our confidence in the inferences of these studies due to low replication numbers.

METHODS AND RESULTS

We present a Python codebase for random forest machine learning segmentation and 3D leaf anatomical trait quantification that dramatically reduces the time required to process single-leaf microCT scans into detailed segmentations. By training the model on each scan using six hand-segmented image slices out of >1500 in the full leaf scan, it achieves >90% accuracy in background and tissue segmentation.

CONCLUSIONS

Overall, this 3D segmentation and quantification pipeline can reduce one of the major barriers to using microCT imaging in high-throughput plant phenotyping.

Guard Cell Metabolism and Stomatal Function

The control of gaseous exchange between the leaf and external atmosphere is governed by stomatal conductance (g_s); therefore, stomata play a critical role in photosynthesis and transpiration and overall plant productivity. Stomatal conductance is determined by both anatomical features and behavioral characteristics. Here we review some of the osmoregulatory pathways in guard cell metabolism, genes and signals that determine stomatal function and patterning, and the recent work that explores coordination between g_s and carbon assimilation (A) and the influence of spatial distribution of functional stomata on underlying mesophyll anatomy. We also evaluate the current literature on mesophyll-driven signals that may coordinate stomatal behavior with mesophyll carbon assimilation and explore stomatal kinetics as a possible target to improve A and water use efficiency. By understanding these processes, we can start to provide insight into manipulation of these regulatory pathways to improve stomatal behavior and identify novel unexploited targets for altering stomatal behavior and improving crop plant productivity.

Drying times: plant traits to improve crop water use efficiency and yield

Crop water use efficiency (WUE) has come into sharp focus as population growth and climate change place increasing strain on the water used in cropping. Rainfed crops are being challenged by an upward trend in evaporative demand as average temperatures rise and, in many regions, there is an increased irregularity and a downward trend in rainfall. In addition, irrigated cropping faces declining water availability and increased competition from other users. Crop WUE would be improved by, first, ensuring that as much water as possible is actually transpired by the crop rather than being wasted. Deeper roots and greater early crop vigour are two traits that should help achieve this. Crop WUE would also be improved by achieving greater biomass per unit water transpired. A host of traits has been proposed to address this outcome. Restricting crop transpiration through lower stomatal conductance is assessed as having limited utility compared with traits that improve carbon gain, such as enhancements to photosynthetic biochemistry and responsiveness, or greater mesophyll conductance. Ultimately, the most useful outcomes for improved crop WUE will probably be achieved by combining traits to achieve synergistic benefit. The potential utility of trait combinations is supported by the results of crop simulation modelling.

Cell and chloroplast anatomical features are poorly estimated from 2D cross-sections

Leaf function is intimately related to the size, shape, abundance and position of cells and chloroplasts. Anatomy has long been assessed and quantified in two dimensions with 3D structure inferred from 2D micrographs. Serial block face scanning electron microscopy (SBF-SEM) was used to reconstruct 95 cells and 1173 chloroplasts from three wheat and nine chickpea leaves (three samples each from three chickpea genotypes). Wheat chloroplast volume was underestimated by 61% in mesophyll cells and 45% in bundle sheath cells from 2D micrographs, whereas chickpea mesophyll chloroplast volume was underestimated by 60% using simple geometrical models. Models of chickpea spongy and palisade cells both under- and overestimated surface area and volume by varying degrees. These models did not adequately capture irregular shapes such as flattening of chloroplasts or lobed spongy mesophyll cells. It is concluded that simple geometrical models to estimate chloroplast and cell 3D volume and surface area from 2D micrographs are inadequate, and that SBF-SEM has strong potential to contribute to improved understanding of leaf form and function.

The developmental relationship between stomata and mesophyll airspace

The quantitative and spatial coordination of stomatal pores in the epidermis and airspaces in the underlying mesophyll tissue is vital for efficient gas exchange in the leaf. The mechanisms that determine the distribution of stomata in the epidermis have been studied extensively, but how this relates to the regulation of mesophyll airspace configuration is poorly understood. Recent studies have investigated how development is coordinated between these tissue layers. The evidence suggests that multiple mechanisms are likely to work concurrently to coordinate stomatal and mesophyll development for optimal leaf gas exchange, and that both genetic and physiological factors contribute to this regulation. Such advances in our understanding of leaf development have important implications for potential improvement of crop water use efficiency.

Cellular perspectives for improving mesophyll conductance

After entering the leaf, CO2 faces an intricate pathway to the site of photosynthetic fixation embedded within the chloroplasts. The efficiency of CO2 flux is hindered by a number of structural and biochemical barriers which, together, define the ease of flow of the gas within the leaf, termed mesophyll conductance. Previous authors have identified the key elements of this pathway, raising the prospect of engineering the system to improve CO2 flux and, thus, to increase leaf photosynthetic efficiency. In this review, we provide a perspective on the potential for improving the individual elements that contribute to this complex parameter. We lay particular emphasis on generation of the cellular architecture of the leaf which sets the initial boundaries of a number of mesophyll conductance parameters, incorporating an overview of the molecular transport processes which have been proposed as major facilitators of CO2 flux across structural boundaries along the pathway. The review highlights the research areas where future effort might be invested to increase our fundamental understanding of mesophyll conductance and leaf function and, consequently, to enable translation of these findings to improve the efficiency of crop photosynthesis.

Photosynthesis and photosynthetic efficiencies along the terrestrial plant's phylogeny: lessons for improving crop photosynthesis

Photosynthesis is the basis of all life on Earth. Surprisingly, until very recently, data on photosynthesis, photosynthetic efficiencies, and photosynthesis limitations in terrestrial land plants other than spermatophytes were very scarce. Here we provide an updated data compilation showing that maximum photosynthesis rates (expressed either on an area or dry mass basis) progressively scale along the land plant's phylogeny, from lowest values in bryophytes to largest in angiosperms. Unexpectedly, both photosynthetic water (WUE) and nitrogen (PNUE) use efficiencies also scale positively through the phylogeny, for which it has been commonly reported that these two efficiencies tend to trade-off between them when comparing different genotypes or a single species subject to different environmental conditions. After providing experimental evidence that these observed trends are mostly due to an increased mesophyll conductance to CO₂ - associated with specific anatomical changes - along the phylogeny, we discuss how these findings on a large phylogenetic scale can provide useful information to address potential photosynthetic improvements in crops in the near future.

Photorespiration in the context of Rubisco biochemistry, CO2 diffusion and metabolism

Photorespiratory metabolism is essential for plants to maintain functional photosynthesis in an oxygen-containing environment. Because the oxygenation reaction of Rubisco is followed by the loss of previously fixed carbon, photorespiration is often considered a wasteful process and considerable efforts are aimed at minimizing the negative impact of photorespiration on the plant's carbon uptake. However, the photorespiratory pathway has also many positive aspects, as it is well integrated within other metabolic processes, such as nitrogen assimilation and C₁ metabolism, and it is important for maintaining the redox balance of the plant. The overall effect of photorespiratory carbon loss on the net CO₂ fixation of the plant is also strongly influenced by the physiology of the leaf related to CO₂ diffusion. This review outlines the distinction between Rubisco oxygenation and photorespiratory CO₂ release as a basis to evaluate the costs and benefits of photorespiration.

In silico study of the role of cell growth factors in photosynthesis using a virtual leaf tissue generator coupled to a microscale photosynthesis gas exchange model

Computational tools that allow in silico analysis of the role of cell growth and division on photosynthesis are scarce. We present a freely available tool that combines a virtual leaf tissue generator and a two-dimensional microscale model of gas transport during C3 photosynthesis. A total of 270 mesophyll geometries were generated with varying degrees of growth anisotropy, growth extent, and extent of schizogenous airspace formation in the palisade mesophyll. The anatomical properties of the virtual leaf tissue and microscopic cross-sections of actual leaf tissue of tomato (Solanum lycopersicum L.) were statistically compared. Model equations for transport of CO2 in the liquid phase of the leaf tissue were discretized over the geometries. The virtual leaf tissue generator produced a leaf anatomy of tomato that was statistically similar to real tomato leaf tissue. The response of photosynthesis to intercellular CO2 predicted by a model that used the virtual leaf tissue geometry compared well with measured values. The results indicate that the light-saturated rate of photosynthesis was influenced by interactive effects of extent and directionality of cell growth and degree of airspace formation through the exposed surface of mesophyll per leaf area. The tool could be used further in investigations of improving photosynthesis and gas exchange in relation to cell growth and leaf anatomy.

In silico study of the role of cell growth factors in photosynthesis using a virtual leaf tissue generator coupled to a microscale photosynthesis gas exchange model

Computational tools that allow in silico analysis of the role of cell growth and division on photosynthesis are scarce. We present a freely available tool that combines a virtual leaf tissue generator and a two-dimensional microscale model of gas transport during C3 photosynthesis. A total of 270 mesophyll geometries were generated with varying degrees of growth anisotropy, growth extent, and extent of schizogenous airspace formation in the palisade mesophyll. The anatomical properties of the virtual leaf tissue and microscopic cross-sections of actual leaf tissue of tomato (Solanum lycopersicum L.) were statistically compared. Model equations for transport of CO2 in the liquid phase of the leaf tissue were discretized over the geometries. The virtual leaf tissue generator produced a leaf anatomy of tomato that was statistically similar to real tomato leaf tissue. The response of photosynthesis to intercellular CO2 predicted by a model that used the virtual leaf tissue geometry compared well with measured values. The results indicate that the light-saturated rate of photosynthesis was influenced by interactive effects of extent and directionality of cell growth and degree of airspace formation through the exposed surface of mesophyll per leaf area. The tool could be used further in investigations of improving photosynthesis and gas exchange in relation to cell growth and leaf anatomy.

Dust accumulation due to anthropogenic impact induces anatomical and photochemical changes in leaves of Centranthus ruber growing on the slope of the Vesuvius volcano

In Mediterranean ecosystems, some natural areas are exposed to severe anthropogenic impact. Especially in summer, the considerable number of tourists visiting such areas, often with vehicles, causes deposition of dust over the vegetation due to formation of powder clouds, also favoured by wind erosion, high temperature, low precipitation and incoherent soil structure. The main aim of this study was to analyse whether the deposition of dust can induce changes in leaf anatomical functional traits and in the efficiency of photosynthetic apparatus in Centranthus ruber, a species widespread in Mediterranean ecosystems. Leaf morpho-functional traits were quantified in plants growing at sites characterised by high (HD) and low (LD) dust deposition, in periods with high anthropogenic impact. Analyses included quantification of chlorophyll fluorescence emission parameters, photosynthetic pigment concentration as well as stomatal size and frequency, leaf lamina thickness, quantification of intercellular spaces and phenolics in the mesophyll through microscopy. The overall analysis suggested that the different conditions of dust deposition induced different adjustment of morpho-functional traits in leaves of C. ruber. High dust deposition shielded the leaf lamina, protecting the photosynthetic apparatus from excess light and favoured plant photochemical efficiency. Leaves exposed to low dust deposition showed higher accumulation of phenolic compounds, protecting chloroplast membranes and characterised by high thermal dissipation of excess light. Such adaptive phenomena can affect vegetation dynamics due to possible different species-specific plant responses, resulting in different plant competitiveness under the limiting conditions of Mediterranean environments.

Biotechnological strategies for improved photosynthesis in a future of elevated atmospheric CO2

The improvement of photosynthesis using biotechnological approaches has been the focus of much research. It is now vital that these strategies be assessed under future atmospheric conditions. The demand for crop products is expanding at an alarming rate due to population growth, enhanced affluence, increased per capita calorie consumption, and an escalating need for plant-based bioproducts. While solving this issue will undoubtedly involve a multifaceted approach, improving crop productivity will almost certainly provide one piece of the puzzle. The improvement of photosynthetic efficiency has been a long-standing goal of plant biotechnologists as possibly one of the last remaining means of achieving higher yielding crops. However, the vast majority of these studies have not taken into consideration possible outcomes when these plants are grown long-term under the elevated CO₂ concentrations (e[CO₂]) that will be evident in the not too distant future. Due to the considerable effect that CO₂ levels have on the photosynthetic process, these assessments should become commonplace as a means of ensuring that research in this field focuses on the most effective approaches for our future climate scenarios. In this review, we discuss the main biotechnological research strategies that are currently underway with the aim of improving photosynthetic efficiency and biomass production/yields in the context of a future of e[CO₂], as well as alternative approaches that may provide further photosynthetic benefits under these conditions.

Photosynthesis Optimized across Land Plant Phylogeny

Until recently, few data were available on photosynthesis and its underlying mechanistically limiting factors in plants, other than crops and model species. Currently, a new large pool of data from extant representatives of basal terrestrial plant groups is emerging, allowing exploration of how photosynthetic capacity (A_max) increases from minimum values in bryophytes to maximum in tracheophytes, which is associated to an optimization of the balance between its limiting factors. From predominant mesophyll conductance limitation (l_m) in bryophytes and lycophytes (fern allies) to stomatal conductance (l_s) and l_m colimitation in pteridophytes (ferns) and gymnosperms, a balanced colimitation by the three limitations is finally reached in angiosperms. We discuss the implications of this new knowledge for future biotechnological attempts to improve crop photosynthesis.

Elevated CO2-induced changes in mesophyll conductance and anatomical traits in wild type and carbohydrate-metabolism mutants of Arabidopsis

Decreases in photosynthetic rate, stomatal conductance (gs), and mesophyll conductance (gm) are often observed under elevated CO2 conditions. However, which anatomical and/or physiological factors contribute to the decrease in gm is not fully understood. Arabidopsis thaliana wild-type and carbon-metabolism mutants (gwd1, pgm1, and cfbp1) with different accumulation patterns of non-structural carbohydrates were grown at ambient (400 ppm) and elevated (800 ppm) CO2. Anatomical and physiological traits of leaves were measured to investigate factors causing the changes in gm and in the mesophyll resistance (expressed as the reciprocal of mesophyll conductance per unit chloroplast surface area facing to intercellular space, Sc/gm). When grown at elevated CO2, all the lines showed increases in cell wall mass, cell wall thickness, and starch content, but not in leaf thickness. gm measured at 800 ppm CO2 was significantly lower than at 400 ppm CO2 in all the lines. Changes in Sc/gm were associated with thicker cell walls rather than with excess starch content. The results indicate that the changes in gm and Sc/gm that occur in response to elevated CO2 are independent of non-structural carbohydrates, and the cell wall represents a greater limitation factor for gm than starch.