Different approaches to heart valve decellularization: A comprehensive overview of the past 30 years

Decellularized extracellular matrix in the treatment of spinal cord injury

Functional limitation caused by spinal cord injury (SCI) has the problem of significant clinical and economic burden. Damaged spinal axonal connections and an inhibitory environment severely hamper neuronal function. Regenerative biomaterials can fill the cavity and produce an optimal microenvironment at the site of SCI, inhibiting apoptosis, inflammation, and glial scar formation while promoting neurogenesis, axonal development, and angiogenesis. Decellularization aims to eliminate cells from the ultrastructure of tissues while keeping tissue-specific components that are similar to the structure of real tissues, making decellularized extracellular matrix (dECM) a suitable scaffold for tissue engineering. dECM has good biocompatibility, it can be widely obtained from natural organs of different species, and can be co-cultured with cells for 3D printing to obtain the target scaffold. In this paper, we reviewed the pathophysiology of SCI, the characteristics of dECM and its preparation method, and the application of dECM in the treatment of SCI. Although dECM has shown its therapeutic effect at present, there are still many indicators that need to be taken into account, such as the difficulty in obtaining materials and standardized production mode for large-scale use, the effect of decellularization on the physical and chemical properties of dECM, and the study on the synergistic effect of dECM and cells.

Evolution of biomimetic ECM scaffolds from decellularized tissue matrix for tissue engineering: A comprehensive review

Tissue engineering is essentially a technique for imitating nature. Natural tissues are made up of three parts: extracellular matrix (ECM), signaling systems, and cells. Therefore, biomimetic ECM scaffold is one of the best candidates for tissue engineering scaffolds. Among the many scaffold materials of biomimetic ECM structure, decellularized ECM scaffolds (dECMs) obtained from natural ECM after acellular treatment stand out because of their inherent natural components and microenvironment. First, an overview of the family of dECMs is provided. The principle, mechanism, advances, and shortfalls of various decellularization technologies, including physical, chemical, and biochemical methods are then critically discussed. Subsequently, a comprehensive review is provided on recent advances in the versatile applications of dECMs including but not limited to decellularized small intestinal submucosa, dermal matrix, amniotic matrix, tendon, vessel, bladder, heart valves. And detailed examples are also drawn from scientific research and practical work. Furthermore, we outline the underlying development directions of dECMs from the perspective that tissue engineering scaffolds play an important role as an important foothold and fulcrum at the intersection of materials and medicine. As scaffolds that have already found diverse applications, dECMs will continue to present both challenges and exciting opportunities for regenerative medicine and tissue engineering.

Genetic knockout of porcine GGTA1 or CMAH/GGTA1 is associated with the emergence of neo-glycans

BACKGROUND

Pig-derived tissues could overcome the shortage of human donor organs in transplantation. However, the glycans with terminal α-Gal and Neu5Gc, which are synthesized by enzymes, encoded by the genes GGTA1 and CMAH, are known to play a major role in immunogenicity of porcine tissue, ultimately leading to xenograft rejection.

METHODS

The N-glycome and glycosphingolipidome of native and decellularized porcine pericardia from wildtype (WT), GGTA1-KO and GGTA1/CMAH-KO pigs were analyzed by multiplexed capillary gel electrophoresis coupled to laser-induced fluorescence detection.

RESULTS

We identified biantennary and core-fucosylated N-glycans terminating with immunogenic α-Gal- and α-Gal-/Neu5Gc-epitopes on pericardium of WT pigs that were absent in GGTA1 and GGTA1/CMAH-KO pigs, respectively. Levels of N-glycans terminating with galactose bound in β(1-4)-linkage to N-acetylglucosamine and their derivatives elongated by Neu5Ac were increased in both KO groups. N-glycans capped with Neu5Gc were increased in GGTA1-KO pigs compared to WT, but were not detected in GGTA1/CMAH-KO pigs. Similarly, the ganglioside Neu5Gc-GM3 was found in WT and GGTA1-KO but not in GGTA1/CMAH-KO pigs. The applied detergent based decellularization efficiently removed GSL glycans.

CONCLUSION

Genetic deletion of GGTA1 or GGTA1/CMAH removes specific epitopes providing a more human-like glycosylation pattern, but at the same time changes distribution and levels of other porcine glycans that are potentially immunogenic.

The application of composite scaffold materials based on decellularized vascular matrix in tissue engineering: a review

Decellularized vascular matrix is a natural polymeric biomaterial that comes from arteries or veins which are removed the cellular contents by physical, chemical and enzymatic means, leaving only the cytoskeletal structure and extracellular matrix to achieve cell adhesion, proliferation and differentiation and creating a suitable microenvironment for their growth. In recent years, the decellularized vascular matrix has attracted much attention in the field of tissue repair and regenerative medicine due to its remarkable cytocompatibility, biodegradability and ability to induce tissue regeneration. Firstly, this review introduces its basic properties and preparation methods; then, it focuses on the application and research of composite scaffold materials based on decellularized vascular matrix in vascular tissue engineering in terms of current in vitro and in vivo studies, and briefly outlines its applications in other tissue engineering fields; finally, it looks into the advantages and drawbacks to be overcome in the application of decellularized vascular matrix materials. In conclusion, as a new bioactive material for building engineered tissue and repairing tissue defects, decellularized vascular matrix will be widely applied in prospect.

Hemocompatibility tuning of an innovative glutaraldehyde-free preparation strategy using riboflavin/UV crosslinking and electron irradiation of bovine pericardium for cardiac substitutes

Hemocompatibility tuning was adopted to explore and refine an innovative, GA-free preparation strategy combining decellularization, riboflavin/UV crosslinking, and low-energy electron irradiation (SULEEI) procedure. A SULEEI-protocol was established to avoid GA-dependent deterioration that results in insufficient long-term aortic valve bioprosthesis durability. Final SULEEI-pericardium, intermediate steps and GA-fixed reference pericardium were exposed in vitro to fresh human whole blood to elucidate effects of preparation parameters on coagulation and inflammation activation and tissue histology. The riboflavin/UV crosslinking step showed to be less efficient in inactivating extracellular matrix (ECM) protein activity than the GA fixation, leading to tissue-factor mediated blood clotting. Intensifying the riboflavin/UV crosslinking with elevated riboflavin concentration and dextran caused an enhanced activation of the complement system. Yet activation processes induced by the previous protocol steps were quenched with the final electron beam treatment step. An optimized SULEEI protocol was developed using an intense and extended, trypsin-containing decellularization step to inactivate tissue factor and a dextran-free, low riboflavin, high UV crosslinking step. The innovative and improved GA-free SULEEI-preparation protocol results in low coagulant and low inflammatory bovine pericardium for surgical application.

Recellularized bovine pericardium with autologous mesenchymal stem cells reduces immune activation

INTRODUCTION

Current bioprosthetic heart valve replacement options are limited by structural valvular deterioration (SVD) due to an immune response to the xenogenic scaffold. Autologous mesenchymal stem cell (MSC) recellularization is a method of concealing xenogenic scaffolds, preventing recipient immune recognition of xenogenic tissue heart valves, and potentially leading to reduction in SVD incidence. The purpose of this study is to examine the effects of autologous MSC recellularized tissue on the immune response of human whole blood to bovine pericardium (BP). We hypothesized that autologous MSC recellularization of BP will result in reduced pro-inflammatory cytokine production equivalent to autologous human pericardium.

METHODS

Bone marrow, human pericardium, and whole blood were collected from adult patients undergoing elective cardiac surgery. Decellularized BP underwent recellularization with autologous MSCs, followed by co-incubation with autologous whole blood. Immunohistochemical, microscopic, and quantitative immune analysis approaches were used.

RESULTS

We demonstrated that native BP, exposed to human whole blood, results in significant TNF-α and IL1β production. When decellularized BP is recellularized with autologous MSCs and exposed to whole blood, there is a significant reduction in TNF-α and IL1β production. Importantly, recellularized BP exposed to whole blood had similar production of TNF-α and IL1β when compared to autologous human pericardium exposed to human whole blood.

CONCLUSION

Our results suggest that preventing initial immune activation with autologous MSC recellularization may be an effective approach to decrease the recipient immune response, preventing recipient immune recognition of xenogeneic tissue engineered heart valves, and potentially leading to reduction in SVD incidence.

Current development of bovine jugular vein conduit for right ventricular outflow tract reconstruction

Right ventricular outflow tract (RVOT) reconstruction is a common surgical method to treat congenital cardiac lesions, and bovine jugular vein conduit (BJVC) has become a prevalent candidate of prosthetic material for this procedure since 1999. Although many clinical studies have shown encouraging results on BJVCs, complications such as stenosis, aneurysmal dilatation, valve insufficiency, and infective endocarditis revealed in other clinical outcomes still remain problematic. This review describes the underlying mechanisms causing respective complications, and summarizes the current technological development that may address those causative factors. Novel crosslinking agents, decellularization techniques, conduit coatings, and physical reinforcement materials have improved the performances of BJVCs. The authors expect that the breakthroughs in the clinical application of BJVC may come from new genetic research findings and advanced characterization apparatuses and bioreactors, and are optimistic that the BJVC will in the future provide sophisticated therapies for next-generation RVOT reconstruction.

Biomaterials for Regenerative Medicine in Italy: Brief State of the Art of the Principal Research Centers

Regenerative medicine is the branch of medicine that effectively uses stem cell therapy and tissue engineering strategies to guide the healing or replacement of damaged tissues or organs. A crucial element is undoubtedly the biomaterial that guides biological events to restore tissue continuity. The polymers, natural or synthetic, find wide application thanks to their great adaptability. In fact, they can be used as principal components, coatings or vehicles to functionalize several biomaterials. There are many leading centers for the research and development of biomaterials in Italy. The aim of this review is to provide an overview of the current state of the art on polymer research for regenerative medicine purposes. The last five years of scientific production of the main Italian research centers has been screened to analyze the current advancement in tissue engineering in order to highlight inputs for the development of novel biomaterials and strategies.

Engineering Efforts to Refine Compatibility and Duration of Aortic Valve Replacements: An Overview of Previous Expectations and New Promises

The absence of pharmacological treatments to reduce or retard the progression of cardiac valve diseases makes replacement with artificial prostheses (mechanical or bio-prosthetic) essential. Given the increasing incidence of cardiac valve pathologies, there is always a more stringent need for valve replacements that offer enhanced performance and durability. Unfortunately, surgical valve replacement with mechanical or biological substitutes still leads to disadvantages over time. In fact, mechanical valves require a lifetime anticoagulation therapy that leads to a rise in thromboembolic complications, while biological valves are still manufactured with non-living tissue, consisting of aldehyde-treated xenograft material (e.g., bovine pericardium) whose integration into the host fails in the mid- to long-term due to unresolved issues regarding immune-compatibility. While various solutions to these shortcomings are currently under scrutiny, the possibility to implant fully biologically compatible valve replacements remains elusive, at least for large-scale deployment. In this regard, the failure in translation of most of the designed tissue engineered heart valves (TEHVs) to a viable clinical solution has played a major role. In this review, we present a comprehensive overview of the TEHVs developed until now, and critically analyze their strengths and limitations emerging from basic research and clinical trials. Starting from these aspects, we will also discuss strategies currently under investigation to produce valve replacements endowed with a true ability to self-repair, remodel and regenerate. We will discuss these new developments not only considering the scientific/technical framework inherent to the design of novel valve prostheses, but also economical and regulatory aspects, which may be crucial for the success of these novel designs.

Can Heart Valve Decellularization Be Standardized? A Review of the Parameters Used for the Quality Control of Decellularization Processes

When a tissue or an organ is considered, the attention inevitably falls on the complex and delicate mechanisms regulating the correct interaction of billions of cells that populate it. However, the most critical component for the functionality of specific tissue or organ is not the cell, but the cell-secreted three-dimensional structure known as the extracellular matrix (ECM). Without the presence of an adequate ECM, there would be no optimal support and stimuli for the cellular component to replicate, communicate and interact properly, thus compromising cell dynamics and behaviour and contributing to the loss of tissue-specific cellular phenotype and functions. The limitations of the current bioprosthetic implantable medical devices have led researchers to explore tissue engineering constructs, predominantly using animal tissues as a potentially unlimited source of materials. The high homology of the protein sequences that compose the mammalian ECM, can be exploited to convert a soft animal tissue into a human autologous functional and long-lasting prosthesis ensuring the viability of the cells and maintaining the proper biomechanical function. Decellularization has been shown to be a highly promising technique to generate tissue-specific ECM-derived products for multiple applications, although it might comprise very complex processes that involve the simultaneous use of chemical, biochemical, physical and enzymatic protocols. Several different approaches have been reported in the literature for the treatment of bone, cartilage, adipose, dermal, neural and cardiovascular tissues, as well as skeletal muscle, tendons and gastrointestinal tract matrices. However, most of these reports refer to experimental data. This paper reviews the most common and latest decellularization approaches that have been adopted in cardiovascular tissue engineering. The efficacy of cells removal was specifically reviewed and discussed, together with the parameters that could be used as quality control markers for the evaluation of the effectiveness of decellularization and tissue biocompatibility. The purpose was to provide a panel of parameters that can be shared and taken into consideration by the scientific community to achieve more efficient, comparable, and reliable experimental research results and a faster technology transfer to the market.

Residual Bioprosthetic Valve Immunogenicity: Forgotten, Not Lost

Despite early realization of the need to control inherent immunogenicity of bioprosthetic replacement heart valves and thereby mitigate the ensuing host response and its associated pathology, including dystrophic calcification, the problem remains unresolved to this day. Concerns over mechanical stiffness associated with prerequisite high cross-link density to effect abrogation of this response, together with the insinuated role of leaching glutaraldehyde monomer in subsequent dystrophic mineralization, have understandably introduced compromises. These have become so entrenched as a benchmark standard that residual immunogenicity of the extracellular matrix has seemingly been relegated to a very subordinate role. Instead, focus has shifted toward the removal of cellular compartment antigens renowned for their implication in the failure of vascularized organ xenotransplants. While decellularization certainly offers advantages, this review aims to refocus attention on the unresolved matter of the host response to the extracellular matrix. Furthermore, by implicating remnant immune and inflammatory processes to bioprosthetic valve pathology, including pannus overgrowth and mineralization, the validity of a preeminent focus on decellularization, in the context of inefficient antigen and possible residual microbial remnant removal, is questioned.

Biodegradable Poly-ε-Caprolactone Scaffolds with ECFCs and iMSCs for Tissue-Engineered Heart Valves

Clinically used heart valve prostheses, despite their progress, are still associated with limitations. Biodegradable poly-ε-caprolactone (PCL) nanofiber scaffolds, as a matrix, were seeded with human endothelial colony-forming cells (ECFCs) and human induced-pluripotent stem cells-derived MSCs (iMSCs) for the generation of tissue-engineered heart valves. Cell adhesion, proliferation, and distribution, as well as the effects of coating PCL nanofibers, were analyzed by fluorescence microscopy and SEM. Mechanical properties of seeded PCL scaffolds were investigated under uniaxial loading. iPSCs were used to differentiate into iMSCs via mesoderm. The obtained iMSCs exhibited a comparable phenotype and surface marker expression to adult human MSCs and were capable of multilineage differentiation. EFCFs and MSCs showed good adhesion and distribution on PCL fibers, forming a closed cell cover. Coating of the fibers resulted in an increased cell number only at an early time point; from day 7 of colonization, there was no difference between cell numbers on coated and uncoated PCL fibers. The mechanical properties of PCL scaffolds under uniaxial loading were compared with native porcine pulmonary valve leaflets. The Young's modulus and mean elongation at Fmax of unseeded PCL scaffolds were comparable to those of native leaflets (p = ns.). Colonization of PCL scaffolds with human ECFCs or iMSCs did not alter these properties (p = ns.). However, the native heart valves exhibited a maximum tensile stress at a force of 1.2 ± 0.5 N, whereas it was lower in the unseeded PCL scaffolds (0.6 ± 0.0 N, p < 0.05). A closed cell layer on PCL tissues did not change the values of Fmax (ECFCs: 0.6 ± 0.1 N; iMSCs: 0.7 ± 0.1 N). Here, a successful two-phase protocol, based on the timed use of differentiation factors for efficient differentiation of human iPSCs into iMSCs, was developed. Furthermore, we demonstrated the successful colonization of a biodegradable PCL nanofiber matrix with human ECFCs and iMSCs suitable for the generation of tissue-engineered heart valves. A closed cell cover was already evident after 14 days for ECFCs and 21 days for MSCs. The PCL tissue did not show major mechanical differences compared to native heart valves, which was not altered by short-term surface colonization with human cells in the absence of an extracellular matrix.

Liver scaffolds obtained by decellularization: A transplant perspective in liver bioengineering

Liver transplantation is the only definitive treatment for many diseases that affect this organ, however, its quantity and viability are reduced. The study of liver scaffolds based on an extracellular matrix is a tissue bioengineering strategy with great application in regenerative medicine. Collectively, recent studies suggest that liver scaffold transplantation may assist in reestablishing hepatic function in preclinical diseased animals, which represents a great potential for application as a treatment for patients with liver disease in the future. This review focuses on useful strategies to promote liver scaffold transplantation and the main open questions about this context. We outline the current knowledge about ex vivo bioengineered liver transplantation, including the surgical techniques, recipient survival time, scaffold preparation before transplantation, and liver disease models. We also highlight the current limitations and future directions regarding in vivo bioengineering techniques.

Long-Term Stability and Biocompatibility of Pericardial Bioprosthetic Heart Valves

The use of bioprostheses for heart valve therapy has gradually evolved over several decades and both surgical and transcatheter devices are now highly successful. The rapid expansion of the transcatheter concept has clearly placed a significant onus on the need for improved production methods, particularly the pre-treatment of bovine pericardium. Two of the difficulties associated with the biocompatibility of bioprosthetic valves are the possibilities of immune responses and calcification, which have led to either catastrophic failure or slow dystrophic changes. These have been addressed by evolutionary trends in cross-linking and decellularization techniques and, over the last two decades, the improvements have resulted in somewhat greater durability. However, as the need to consider the use of bioprosthetic valves in younger patients has become an important clinical and sociological issue, the requirement for even greater longevity and safety is now paramount. This is especially true with respect to potential therapies for young people who are afflicted by rheumatic heart disease, mostly in low- to middle-income countries, for whom no clinically acceptable and cost-effective treatments currently exist. To extend longevity to this new level, it has been necessary to evaluate the mechanisms of pericardium biocompatibility, with special emphasis on the interplay between cross-linking, decellularization and anti-immunogenicity processes. These mechanisms are reviewed in this paper. On the basis of a better understanding of these mechanisms, a few alternative treatment protocols have been developed in the last few years. The most promising protocol here is based on a carefully designed combination of phases of tissue-protective decellularization with a finely-titrated cross-linking sequence. Such refined protocols offer considerable potential in the progress toward superior longevity of pericardial heart valves and introduce a scientific dimension beyond the largely disappointing 'anti-calcification' treatments of past decades.

Visible light-induced cross-linking of porcine pericardium for the improvement of endothelialization, anti-tearing, and anticalcification properties

Population aging and the development of transcatheter aortic valve replacement boost the implantation of bioprosthetic heart valves (BHVs) in patients worldwide. However, the traditional glutaraldehyde cross-linked BHVs fail within 12-15 years mainly due to leaflet tear and calcification defects. In this study, a novel visible light-induced cross-linking of the porcine pericardium (PP) was realized by the photo-oxidation of the furfuryl-modified PP in the presence of Rose Bengal. The resulting material showed comparable collagen stability with the glutaraldehyde cross-linked PP and appropriate biomechanical properties such as tensile strength, modulus, and elongation, suggesting that this material could meet the general requirement for BHVs. Besides, this cross-linked PP showed significantly improved cytocompatibility compared with the Glut-cross-linked PP, with no cytotoxicity to L929 cells and the ability to support HUVECgrowth. Meanwhile, this material showed superior anti-tearing performance and much less calcification than the Glut-cross-linked PP in hope of reducing the risk of BHV failure. Considering these results, the visible light-induced cross-linking method proposed in this study could provide a promising way to construct a biocompatible and robust biomaterial for the fabrication of the BHV.

Effect of luminal surface structure of decellularized aorta on thrombus formation and cell behavior

Due to an increasing number of cardiovascular diseases, artificial heart valves and blood vessels have been developed. Although cardiovascular applications using decellularized tissue have been studied, the mechanisms of their functionality remain unknown. To determine the important factors for preparing decellularized cardiovascular prostheses that show good in vivo performance, the effects of the luminal surface structure of the decellularized aorta on thrombus formation and cell behavior were investigated. Various luminal surface structures of a decellularized aorta were prepared by heating, drying, and peeling. The luminal surface structure and collagen denaturation were evaluated by immunohistological staining, collagen hybridizing peptide (CHP) staining, and scanning electron microscopy (SEM) analysis. To evaluate the effects of luminal surface structure of decellularized aorta on thrombus formation and cell behavior, blood clotting tests and recellularization of endothelial cells and smooth muscle cells were performed. The results of the blood clotting test showed that the closer the luminal surface structure is to the native aorta, the higher the anti-coagulant property. The results of the cell seeding test suggest that vascular cells recognize the luminal surface structure and regulate adhesion, proliferation, and functional expression accordingly. These results provide important factors for preparing decellularized cardiovascular prostheses and will lead to future developments in decellularized cardiovascular applications.

Midterm Outcomes of Crosslinked Acellular Bovine Jugular Vein Conduit for Right Ventricular Outflow Tract Reconstruction

Objectives: Conduits for reconstructing right ventricular outflow tract (RVOT) in children with congenital heart disease have evolved for better durability over the past decades, but conduits failure remains common. We designed decellularized and photooxidatively crosslinked bovine jugular vein conduit (DP-BJVC) and now aim to evaluate the midterm results of DP-BJVC for RVOT reconstruction. Methods: Ninety patients (median age: 4.2 years) undergoing RVOT reconstruction using DP-BJVC were prospectively followed for median of 4.7 years (range: 0.2-16.1 years). Kaplan-Meier analysis was used to examine the survival, freedom from conduit explantation and catheter-based reintervention. Risk factors were analyzed with Cox regression analysis. Results: Follow-up was completed in 92% of patients. There were five (5.6%) early deaths. The 10-year survival rate was 85.2%, with palliative procedure at DP-BJVC implantation as the risk factor. The 10-year freedom from conduit explantation and reintervention were 84.4 and 67.3% respectively, with previous cardiac operation as the only risk factor for explantation. Complications during the follow-up included conduit stenosis (peak gradient ≥50 mmHg) in 12 (12.9%), severe regurgitation in 2 (2.4%), and infective endocarditis in 2 (2.4%). The annual increase in gradient was highest in the first year (P = 0.003), but not appreciably afterwards. The echo-measured annulus diameter trends to increase by an average of 0.37 mm per year. Calcification appeared mild in the failed conduits. Conclusions: DP-BJVC provides satisfactory durability and functionality for RVOT reconstruction for children, with low morbidity of stenosis and endocarditis, as well as increase in diameter mildly with age in midterm follow-ups.

Biomaterials in Valvular Heart Diseases

Valvular heart disease (VHD) occurs as the result of valvular malfunction, which can greatly reduce patient's quality of life and if left untreated may lead to death. Different treatment regiments are available for management of this defect, which can be helpful in reducing the symptoms. The global commitment to reduce VHD-related mortality rates has enhanced the need for new therapeutic approaches. During the past decade, development of innovative pharmacological and surgical approaches have dramatically improved the quality of life for VHD patients, yet the search for low cost, more effective, and less invasive approaches is ongoing. The gold standard approach for VHD management is to replace or repair the injured valvular tissue with natural or synthetic biomaterials. Application of these biomaterials for cardiac valve regeneration and repair holds a great promise for treatment of this type of heart disease. The focus of the present review is the current use of different types of biomaterials in treatment of valvular heart diseases.

Decellularized tissue-engineered heart valves calcification: what do animal and clinical studies tell us?

Cardiovascular diseases are the first cause of death worldwide. Among different heart malfunctions, heart valve failure due to calcification is still a challenging problem. While drug-dependent treatment for the early stage calcification could slow down its progression, heart valve replacement is inevitable in the late stages. Currently, heart valve replacements involve mainly two types of substitutes: mechanical and biological heart valves. Despite their significant advantages in restoring the cardiac function, both types of valves suffered from serious drawbacks in the long term. On the one hand, the mechanical one showed non-physiological hemodynamics and the need for the chronic anticoagulation therapy. On the other hand, the biological one showed stenosis and/or regurgitation due to calcification. Nowadays, new promising heart valve substitutes have emerged, known as decellularized tissue-engineered heart valves (dTEHV). Decellularized tissues of different types have been widely tested in bioprosthetic and tissue-engineered valves because of their superior biomechanics, biocompatibility, and biomimetic material composition. Such advantages allow successful cell attachment, growth and function leading finally to a living regenerative valvular tissue in vivo. Yet, there are no comprehensive studies that are covering the performance of dTEHV scaffolds in terms of their efficiency for the calcification problem. In this review article, we sought to answer the question of whether decellularized heart valves calcify or not. Also, which factors make them calcify and which ones lower and/or prevent their calcification. In addition, the review discussed the possible mechanisms for dTEHV calcification in comparison to the calcification in the native and bioprosthetic heart valves. For this purpose, we did a retrospective study for all the published work of decellularized heart valves. Only animal and clinical studies were included in this review. Those animal and clinical studies were further subcategorized into 4 categories for each depending on the effect of decellularization on calcification. Due to the complex nature of calcification in heart valves, other in vitro and in silico studies were not included. Finally, we compared the different results and summed up all the solid findings of whether decellularized heart valves calcify or not. Based on our review, the selection of the proper heart valve tissue sources (no immunological provoking residues), decellularization technique (no damaged exposed residues of the decellularized tissues, no remnants of dead cells, no remnants of decellularizing agents) and implantation techniques (avoiding suturing during the surgical implantation) could provide a perfect anticalcification potential even without in vitro cell seeding or additional scaffold treatment.

PROSPECTS FOR APPLICATION OF BOVINE PERICARDIAL SCAFFOLD FOR CARDIAL SURGERY

The aim of the\* study was to estimate the properties of the scaffold obtained by decellularization of bovine pericardium with a 0.1% solution of sodium dodecyl sulfate. The experiment included standard histological, microscopic, molecular genetic, and biomechanical methods. Scaffold was tested in vitro for cytotoxicity and in vivo for biocompatibility. A high degree of removal of cells and their components from bovine pericardium-derived matrix was shown. Biomechanical characteristics of artificial scaffold were the same as those of the native pericardium. With prolonged contact, no cytotoxic effect on human cells was observed. The biointegration of the scaffold in laboratory animals tissues was noted, which confirms the potential possibility of the implant applicationin cardiac surgery.

Tough pNAGA hydrogel hybridized porcine pericardium for the pre-mounted TAVI valve with improved anti-tearing properties and hemocompatibility

The rate of adoption of transcatheter aortic valve implantation (TAVI) is increasing rapidly, due to the procedure being less invasive. However, TAVI still faces problems relating to durability, the potential incidence of thrombosis, and the inconvenience of storage in glutaraldehyde (Glut) solution. In this work, a tough hydrogel poly(N-acryloyl glycinamide) (pNAGA) is hybridized with Glut-crosslinked porcine pericardium (Glut-PP) via in situ polymerization and glycerolization, so as to obtain dry leafet material for the fabrication of a pre-mounted bioprosthetic heart valve (BHV). The tensile strength, anti-shearing, and anti-tearing properties of the valve are significantly improved by the process of hydrogel hybridization. Following a period of dry-state compression as a simulation for the crimping process of pre-mounted TAV, pNAGA/Glut-PP showed full recovery without structural damage when fully rehydrated. The introduction of pNAGA also improved the blood compatibility of the tissue, with less clot formation and fewer blood cells adhering to the surface of pNAGA/Glut-PP than is found with Glut-PP. Subcutaneous implantation in rats showed that pNAGA/Glut-PP induced a decreased inflammatory response compared with Glut-PP. These results indicate that the strategy for hybridization with hydrogel could be a potential method for preparing pre-mounted TAVs with an improved performance.

Inorganic-polymerization crosslinked tissue-siloxane hybrid as potential biomaterial for bioprosthetic heart valves

Bioprosthetic heart valve (BHV) replacement is increasingly used for treating valve-related diseases worldwide but the current commercially used BHVs treated with glutaraldehyde (Glut) often failed within 12-15 years due to degradation, thrombosis, inferior biocompatibility, and calcification. Herein, 3-glycidyloxypropyl trimethoxysilane (GPTMS) was used to crosslink porcine pericardium (PP) at the concentration (vol/vol) of 0.25%, 1%, 2%, and 4% and their performance for potential application in BHVs was evaluated. The crosslinking mechanism mainly involved the ring-opening of epoxide by amine attack and silanol poly-condensation. The stability of collagen in higher concentration (1%, 2%, and 4%) GPTMS crosslinked PPs (GPTMS-PPs) was clearly increased. GPTMS-PPs showed no cytotoxicity and supported the growth of endothelial cells while Glut-PP did not. GPTMS-PPs were less prothrombotic than Glut-PP. GPTMS-PP crosslinked at 1% concentration showed comparable mechanical properties to Glut-PP while had better anti-tearing performance. The subcutaneous implantation in rat for 30 days showed that GPTMS crosslinking was able to effectively inhibit the calcification of BHV.

Toward acellular xenogeneic heart valve prostheses: Histological and biomechanical characterization of decellularized and enzymatically deglycosylated porcine pulmonary heart valve matrices

The use of decellularized xenogeneic heart valves might offer a solution to overcome the issue of human valve shortage. The aim of this study was to revise decellularization protocols in combination with enzymatic deglycosylation, in order to reduce the immunogenicity of porcine pulmonary heart valves, in means of cells, carbohydrates, and, primarily, Galα1-3Gal (α-Gal) epitope removal. In particular, the valves were decellularized with sodium dodecylsulfate/sodium deoxycholate (SDS/SD), Triton X-100 + SDS (Tx + SDS), or Trypsin + Triton X-100 (Tryp + Tx) followed by enzymatic digestion with PNGaseF, Endoglycosidase H, or O-glycosidase combined with Neuraminidase. Results showed that decellularization alone reduced carbohydrate structures only to a limited extent, and it did not result in an α-Gal free scaffold. Nevertheless, decellularization with Tryp + Tx represented the most effective decellularization protocol in means of carbohydrates reduction. Overall, carbohydrates and α-Gal removal could strongly be improved by applying PNGaseF, in particular in combination with Tryp + Tx treatment, contrary to Endoglycosidase H and O-glycosidase treatments. Furthermore, decellularization with PNGaseF did not affect biomechanical stability, in comparison with decellularization alone, as shown by burst pressure and uniaxial tensile tests. In conclusion, valves decellularized with Tryp + Tx and PNGaseF resulted in prostheses with potentially reduced immunogenicity and maintained mechanical stability.

Characterization of a heparinized decellularized scaffold and its effects on mechanical and structural properties

Decellularization is a promising approach in tissue engineering to generate small-diameter blood vessels. However, some challenges still exist. We performed two decellularization phases to develop an optimal decellularized scaffold and analyze the relationship between the extracellular matrix (ECM) composition and mechanical properties. In decellularization phase I, we tested sodium dodecylsulfate (SDS), Triton X-100 (TX100) and trypsin at different concentrations and exposure times. In decellularization phase II, we systematically compared five combined decellularization protocols based on the results of phase I to identify the optimal method. These protocols tested cell removal, ECM preservation, mechanical properties, and residual cytotoxicity. We further immobilized heparin to optimal decellularized scaffolds and determined its anticoagulant activity and mechanical properties. The combined decellularization protocol comprising treatment with 0.5% SDS followed by 1% TX100 could completely remove the cellular contents and preserve the mechanical properties and ECM architecture better. In addition, the heparinized decellularized scaffolds not only had sustained anticoagulant activity, but also similar mechanical properties to native vessels. In conclusion, heparinized decellularized scaffolds represent a promising direction for small-diameter vascular grafts, although further in vivo studies are needed.

Sterilization and Cross-Linking Combined with Ultraviolet Irradiation and Low-Energy Electron Irradiation Procedure: New Perspectives for Bovine Pericardial Implants in Cardiac Surgery

BACKGROUND

 Bovine pericardium is the major natural source of patches and aortic valve substitutes in cardiac repair procedures. However, long-term tissue durability and biocompatibility issues lead to degeneration (e.g., calcification) that requires reoperation. Tissue preparation strategies, including glutaraldehyde fixation, are reasons for the deterioration of pericardial tissues. We describe a pretreatment procedure involving sterilization and cross-linking combined with ultraviolet (UV) irradiation and low-energy electron irradiation (SULEEI). This innovative, glutaraldehyde-free protocol improves the mechanical aspects and biocompatibility of porcine pericardium patches.

METHODS

 We adopted the SULEEI protocol, which combines decellularization, sterilization, and cross-linking, along with UV irradiation and low-energy electron irradiation, to pretreat bovine pericardium. Biomechanics, such as ultimate tensile strength and elasticity, were investigated by comparing SULEEI-treated tissue with glutaraldehyde-fixed analogues, clinical patch materials, and an aortic valve substitute. Histomorphological and cellular aspects were investigated by histology, DNA content analysis, and degradability.

RESULTS

 Mechanical parameters, including ultimate tensile strength, elasticity (Young's modulus), and suture retention strength, were similar for SULEEI-treated and clinically applied bovine pericardium. The SULEEI-treated tissues showed well-preserved histoarchitecture that resembled all pericardial tissues investigated. Fiber density did not differ significantly. DNA content after the SULEEI procedure was reduced to less than 10% of the original tissue material, and more than 50% of the SULEEI-treated pericardium was digested by collagenase.

CONCLUSION

 The SULEEI procedure represents a new treatment protocol for the preparation of patches and aortic valve prostheses from bovine pericardial tissue. The avoidance of glutaraldehyde fixation may lessen the tissue degeneration processes in cardiac repair patches and valve prostheses.

Cell-derived matrices (CDM)-Methods, challenges and applications

Extracellular matrix (ECM) provides both physical support and bioactive signals such as growth factors and cytokines to cells at their microenvironment or niche. Engineering the matrix niche becomes an important approach to study or manipulate cellular fate. This work presents an overview on the reconstitution of the ECM niche through a wide range of approaches ranging from coating culture dish with ECM molecules to decellularization of native tissues. In particular, we focused on reconstituting the complex ECM niche through cell-derived matrix (CDM) by reviewing the methodological approaches used in our group to derive ECM from mature cells such as chondrocytes and nucleus pulposus cells (NPCs), undifferentiated stem cells such as mesenchymal stem cells (MSCs), as well as MSCs undergoing chondrogenic and osteogenic differentiation, in 2D or 3D models. Specific attention has also been given to key factors that should be considered in various applications and challenges in relation to the CDM. Last but not the least, a few future perspectives and their significance have been proposed.

Histological and Biomechanical Characteristics of Human Decellularized Allograft Heart Valves After Eighteen Months of Storage in Saline Solution

Background: The best storage preservation method for maintaining the quality and safety of human decellularized allograft heart valves is yet to be established. Objective: The aim of the present study was to evaluate the stability in terms of extracellular matrix (ECM) integrity of human heart valve allografts decellularized using sodium dodecyl sulfate-ethylenediaminetetraacetic acid (SDS-EDTA) and stored for 6, 12, and 18 months. Methods: A total of 70 decellularized aortic and pulmonary valves were analyzed across different storage times (0, 6, 12, and 18 months) for solution pH measurements, histological findings, cytotoxicity assay results, biomechanical test results, and microbiological suitability test results. Continuous data were analyzed using one-way analysis of variance comparing the follow-up times. Results: The pH of the stock solution did not change during the different time points, and no microbial growth occurred up to 18 months. Histological analysis showed that the decellularized allografts did not present deleterious outcomes or signs of structural degeneration in the ECM up to 12 months. The biomechanical properties showed changes over time in different aspects. Allografts stored for 18 months presented lower tensile strength and elasticity than those stored for 12 months (p < 0.05). The microbiological suitability test suggested no residual antimicrobial effects. Conclusion: Changes in the structure and functionality of SDS-EDTA decellularized heart valve allografts occur after 12 months of storage.

Decellularized Extracellular Matrix as a Potent Natural Biomaterial for Regenerative Medicine

Decellularization technique is a favorable method used to fabricate natural and tissue-like scaffolds. This technique is important because of its remarkable ability to perfectly mimic the natural extracellular matrix (ECM). ECM-based scaffolds/hydrogels provide structural support for cell differentiation and maturation. Therefore, novel natural-based bioinks, ECM-based hydrogels, and particulate forms of the ECM provide promising strategies for whole organ regeneration. Despite its efficacious characteristics, removal of residual detergent and the presence of various protocols make this technique challenging for scientists and regenerative medicine-related programs. This chapter reviews the most effective physical, chemical, and enzymatic protocols used to remove the cellular components and their challenges. We discuss the applications of decellularized ECM (dECM) in tissue engineering and regenerative medicine with an emphasis on hard tissues.

Pulp ECM-derived macroporous scaffolds for stimulation of dental-pulp regeneration process

OBJECTIVE

Recent studies suggest xenogeneic extracellular matrices as potential regenerative tools in dental pulp regeneration. This study aimed to fabricate and characterize a novel three-dimensional macroporous pulp-derived scaffold that enables the attachment, penetration, proliferation and differentiation of mesenchymal stem cells.

METHOD

Bovine pulp was decellularized and characterized with histological and DNA content methods. This scaffold was prepared using finely milled lyophilized decellularized pulp extracellular matrix (ECM) digested with pepsin. Three different concentrations of ECM (1.50, 2.25 and 3.00mg/ml) were freeze-dried and were tested with/without chemical crosslinking. The specimens were subjected to physicochemical characterization, cell viability and quantitative real time polymerase chain reaction assessments with human bone marrow mesenchymal stem cells (hBMMSCs). All scaffolds were subcutaneously implanted in rats for two weeks and histological and immunostaining analyses were performed.

RESULTS

Histological and DNA analysis confirmed complete decellularization. All samples demonstrated more than 97% porosity and 1.50mg/ml scaffold demonstrated highest water absorption. The highest cell viability and proliferation of hBMMSCs was observed on the 3.00mg/ml crosslinked scaffolds. The gene expression analysis showed a significant increase of dmp-1 and collagen-I on 3.00mg/ml crosslinked scaffolds compared to the other scaffolds. Histological examination of subcutaneous implanted scaffolds revealed low immunological response, and enhanced angiogenesis in cross-linked samples compared to non-crosslinked samples.

SIGNIFICANCE

The three-dimensional macroporous pulp-derived injectable scaffold developed and characterized in this study displayed potential for regenerative therapy. While the scaffold biodegradability was decreased by crosslinking, the biocompatibility of post-crosslinked scaffold was significantly improved.

An overview of decellularisation techniques of native tissues and tissue engineered products for bone, ligament and tendon regeneration

Decellularised tissues and organs have been successfully used in a variety of tissue engineering/regenerative medicine applications. Because of the complexity of each tissue (size, porosity, extracellular matrix (ECM) composition etc.), there is no standardised protocol and the decellularisation methods vary widely, thus leading to heterogeneous outcomes. Physical, chemical, and enzymatic methods have been developed and optimised for each specific application and this review describes the most common strategies utilised to achieve decellularisation of soft and hard tissues. While removal of the DNA is the primary goal of decellularisation, it is generally achieved at the expense of ECM preservation due to the harsh chemical or enzymatic processing conditions. As denaturation of the native ECM has been associated with undesired host responses, decellularisation conditions aimed at effectively achieving simultaneous DNA removal and minimal ECM damage will be highlighted. Additionally, the utilisation of decellularised matrices in regenerative medicine is explored, as are the most recent strategies implemented to circumvent challenges in this field. In summary, this review focusses on the latest advancements and future perspectives in the utilisation of natural ECM for the decoration of synthetic porous scaffolds.

Generation of cattle knockout for galactose-α1,3-galactose and N-glycolylneuraminic acid antigens

Two well‐characterized carbohydrate epitopes are absent in humans but present in other mammals. These are galactose‐α1,3‐galactose (αGal) and N‐glycolylneuraminic acid (Neu5Gc) which are introduced by the activities of two enzymes including α(1,3) galactosyltransferase (encoded by the GGTA1 gene) and CMP‐Neu5Gc hydroxylase (encoded by the CMAH gene) that are inactive in humans but present in cattle. Hence, bovine‐derived products are antigenic in humans who receive bioprosthetic heart valves (BHVs) or those that suffer from red meat syndrome. Using programmable nucleases, we disrupted (knockout, KO) GGTA1 and CMAH genes encoding for the enzymes that catalyse the synthesis of αGal and Neu5Gc, respectively, in both male and female bovine fibroblasts. The KO in clonally selected fibroblasts was detected by polymerase chain reaction (PCR) and confirmed by Sanger sequencing. Selected fibroblasts colonies were used for somatic cell nuclear transfer (SCNT) to produce cloned embryos that were implanted in surrogate recipient heifers. Fifty‐three embryos were implanted in 33 recipients heifers; 3 pregnancies were carried to term and delivered 3 live calves. Primary cell cultures were established from the 3 calves and following molecular analyses confirmed the genetic deletions. FACS analysis showed the double‐KO phenotype for both antigens confirming the mutated genotypes. Availability of such cattle double‐KO model lacking both αGal and Neu5Gc offers a unique opportunity to study the functionality of BHV manufactured with tissues of potentially lower immunogenicity, as well as a possible new clinical approaches to help patients with red meat allergy syndrome due to the presence of these xenoantigens in the diet.

Independent, Controllable Stretch-Perfusion Bioreactor Chambers to Functionalize Cell-Seeded Decellularized Tendons

Tissue-engineered decellularized matrices can progress clinical replacement of full-thickness ruptures or tendon defects. This study develops and validates a custom-made automated bioreactor, called oscillating stretch-perfusion bioreactor (OSPB), consisting of multiple, independent culture chambers able to combine a bidirectional perfusion with a programmable, uniaxial strain to functionalize cell-seeded decellularized tendons. Decellularized tendon matrices were seeded on their surfaces and within the tendon fibers with mesenchymal stem cells. Then, they were subjected to a bidirectional perfusion and programmed stretching cycles of 15–30–60 min on–off two times per day for 7 days of culture. In vitro analyses showed viable cells, homogenously distributed on the surface of the constructs. More importantly, cell-seeded decellularized tendon grafts undergoing cyclic load in our bioreactor had a superior production and organization of newly formed collagen matrix compared to static cultured constructs. The coherency and local alignment of the new collagen deposition within the inner injected channels quantitatively supported histological findings. The designed OSPB could be considered a unique, cost-effective system able to involve multiple independently controlled chambers in terms of biological and mechanical protocols. This system allows parallel processing of several customized tendon constructs to be used as grafts to enhance the surgical repair of large tendon defects.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.