Self-assembly at all scales

Assembling carbon nitride quantum dots into hollow fusiformis and loading CoP for photocatalytic hydrogen evolution

The self-assembled carbon nitride quantum dots (CNQDs) has been largely advanced owing to the structure-relative photocatalytic activities, especially its electronic structure, which can be regulated by defects, functional groups, and doping. However, there are still issues such as wide band gaps for the assembles and severe recombination of photoinduced charges. Herein, we demonstrate the self-assembly of CNQDs into fusiform hollow superstructures (CNFHs), induced by hydrogen bonding between the terminal functional groups (-OH, -COOH, and -NH2). During the top-down assembly process, the hydrogen bonding dominates and initiates lateral cross-linking between adjacent CNQDs, which further twist into fusiform hollow structures. Benefitted greatly from the ultrathin and hollow nature of the superstructure that provides more exposed active sites, coupled with the introduction of phosphorus doping atoms into the framework induced narrowed band gap, CNFHs exhibits an 18-fold higher activity than the bulk counterpart toward photocatalytic hydrogen evolution after loading the CoP co-catalyst. This work presents a new platform to design and manipulate carbon nitride superstructures.

A Naturally Inspired Extrusion-Based Microfluidic Approach for Manufacturing Tailorable Magnetic Soft Continuum Microrobotic Devices

Soft materials play a crucial role in small-scale robotic applications by closely mimicking the complex motion and morphing behavior of organisms. However, conventional fabrication methods face challenges in creating highly integrated small-scale soft devices. In this study, microfluidics is leveraged to precisely control reaction-diffusion (RD) processes to generate multifunctional and compartmentalized calcium-cross-linkable alginate-based microfibers. Under RD conditions, sophisticated alginate-based fibers are produced for magnetic soft continuum robotics applications with customizable features, such as geometry (compact or hollow), degree of cross-linking, and the precise localization of magnetic nanoparticles (inside the core, surrounding the fiber, or on one side). This fine control allows for tuning the stiffness and magnetic responsiveness of the microfibers. Additionally, chemically cleavable regions within the fibers enable disassembly into smaller robotic units or roll-up structures under a rotating magnetic field. These findings demonstrate the versatility of microfluidics in processing highly integrated small-scale devices.

Procrystalline Self-Assembly of Desymmetrized Pentaphenylcyclopentadiene

The interplay between the molecular shape and the intermolecular interaction plays a decisive role in self-assembled structures. Recently, inherent randomness of low ordered assemblies, resulting from lack of short- and long-range periodicities, has attracted significant attention due to the unique structural, electronic, and mechanical properties. Here, we present procrystalline self-assemblies of pentaphenyl cyclopentadienyl derivatives on Ag(111) and Au(111) with scanning tunneling microscopy, operating at 4.3 K under ultrahigh vacuum conditions. Two examples, using 5-fold symmetric molecules substituted with methyl or fluorine groups, show that weak interactions, such as π-π stacking, CH-π interactions, and CH···F hydrogen bonding, play a pivotal role in formation of the procrystalline assembly. Our results may give insights into the intricate relationship between the molecular shape and the intermolecular interaction in the formation of non-crystalline assemblies.

Transient Covalent Polymers through Carbodiimide-Driven Assembly

Biochemical systems make use of out-of-equilibrium polymers generated under kinetic control. Inspired by these systems, many abiotic supramolecular polymers driven by chemical fuel reactions have been reported. Conversely, polymers based on transient covalent bonds have received little attention, even though they have the potential to complement supramolecular systems by generating transient structures based on stronger bonds and by offering a straightforward tuning of reaction kinetics. In this study, we show that simple aqueous dicarboxylic acids give poly(anhydrides) when treated with the carbodiimide EDC. Transient covalent polymers with molecular weights exceeding 15,000 are generated which then decompose over the course of hours to weeks. Disassembly kinetics can be controlled using simple substituent effects in the monomer design. The impact of solvent polarity, carbodiimide concentration, temperature, pyridine concentration, and monomer concentration on polymer properties and lifetimes has been investigated. The results reveal substantial control over polymer assembly and disassembly kinetics, highlighting the potential for fine-tuned kinetic control in nonequilibrium polymerization systems.

Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system

Various anisotropic tissue structures exist in organisms, including muscle tissue, skin tissue, and nerve tissue. Replicating anisotropic tissue structuresin vitrohas posed a significant challenge. Three-dimensional (3D) printing technology is often used to fabricate biomimetic structures due to its advantages in manufacturing principle. However, direct 3D printing of freeform anisotropic bioactive structures has not been reported. To tackle this challenge, we developed a ternary F/G/P ink system that integrates the printability of Pluronic F127 (F), the robust bioactivity and photocrosslinking properties of gelatin methacryloyl (G), and the shear-induced alignment functionality of high-molecular-weight polyethylene glycol (P). And through this strategic ternary system combination, freeform anisotropic tissue structures can be 3D printed directly. Moreover, these anisotropic structures exhibit excellent bioactivity, and promote orientational growth of different cells. This advancement holds promise for the repair and replacement of anisotropic tissues within the human body.

Macroscopic homochiral helicoids self-assembled via screw dislocations

Chirality is a fundamental property in nature and is widely observed at hierarchical scales from subatomic, molecular, supramolecular to macroscopic and even galaxy. However, the transmission of chirality across different length scales and the expression of homochiral nano/microstructures remain challenging. Herein, we report the formation of macroscopic homochiral helicoids with ten micrometers from enantiomeric pyromellitic diimide-based molecular triangle (PMDI-Δ) and achiral pyrene via a screw dislocation-driven co-self-assembly. Chiral transfer and expression from molecular and supramolecular levels, to the macroscopic helicoids, is continuous and follows the molecular chirality of PMDI-Δ. Furthermore, the screw dislocation and chirality transfer lead to a unidirectional curvature of the helicoids, which exhibit excellent circularly polarized luminescence with large |glum| values up to 0.05. Our results demonstrate the formation of a homochiral macroscopic organic helicoid and function emergence from small molecules via screw dislocations, which deepens our understanding of chiral transfer and expression across different length scales.

Automated Search Strategy for Novel Ordered Structures of Block Copolymers

Block copolymers with different architectures can possibly generate innumerable stable or metastable structures and thus provide an irreplaceable platform for theoretically exploring novel structures. Self-consistent field theory (SCFT) is a powerful tool to predict the ordered structures of block copolymers; however, it is sensitively dependent on its initial condition. Here we propose to use multiple symmetry-adapted basis functions to generate the initial conditions of SCFT and then apply Bayesian optimization to search for ordered structures by navigating the coefficient space of these basis functions. Without any prior knowledge, our scheme can automatically recover hundreds of ordered structures for two simple block copolymers, including most of the common structures and complex Frank-Kasper structures, together with many novel structures. By applying the automated scheme to various block copolymers, a huge number of novel structures can be obtained to expand the structural library, which may create new opportunities for the scientific community.

Symmetry-Guided Inverse Design of Self-Assembling Multiscale DNA Origami Tilings

Recent advances enable the creation of nanoscale building blocks with complex geometries and interaction specificities for self-assembly. This nearly boundless design space necessitates design principles for defining the mutual interactions between multiple particle species to target a user-specified complex structure or pattern. In this article, we develop a symmetry-based method to generate the interaction matrices that specify the assembly of two-dimensional tilings, which we illustrate using equilateral triangles. By exploiting the allowed 2D symmetries, we develop an algorithmic approach by which any periodic 2D tiling can be generated from an arbitrarily large number of subunit species, notably addressing an unmet challenge of engineering 2D crystals with periodicities that can be arbitrarily larger than the subunit size. To demonstrate the utility of our design approach, we encode specific interactions between triangular subunits synthesized by DNA origami and show that we can guide their self-assembly into tilings with a wide variety of symmetries, using up to 12 unique species of triangles. By conjugating specific triangles with gold nanoparticles, we fabricate gold-nanoparticle supracrystals whose lattice parameter spans up to 300 nm. Finally, to generate economical design rules, we compare the design economy of various tilings. In particular, we show that (1) higher symmetries allow assembly of larger unit cells with fewer subunits and (2) linear supracrystals can be designed more economically using linear primitive unit cells. This work provides a simple algorithmic approach to designing periodic assemblies, aiding in the multiscale assembly of supracrystals of nanostructured "meta-atoms" with engineered plasmonic functions.

Natural Products from Herbal Medicine Self-Assemble into Advanced Bioactive Materials

Novel biomaterials are becoming more crucial in treating human diseases. However, many materials require complex artificial modifications and synthesis, leading to potential difficulties in preparation, side effects, and clinical translation. Recently, significant progress has been achieved in terms of direct self-assembly of natural products from herbal medicine (NPHM), an important source for novel medications, resulting in a wide range of bioactive supramolecular materials including gels, and nanoparticles. The NPHM-based supramolecular bioactive materials are produced from renewable resources, are simple to prepare, and have demonstrated multi-functionality including slow-release, smart-responsive release, and especially possess powerful biological effects to treat various diseases. In this review, NPHM-based supramolecular bioactive materials have been revealed as an emerging, revolutionary, and promising strategy. The development, advantages, and limitations of NPHM, as well as the advantageous position of NPHM-based materials, are first reviewed. Subsequently, a systematic and comprehensive analysis of the self-assembly strategies specific to seven major classes of NPHM is highlighted. Insights into the influence of NPHM structural features on the formation of supramolecular materials are also provided. Finally, the drivers and preparations are summarized, emphasizing the biomedical applications, future scientific challenges, and opportunities, with the hope of igniting inspiration for future research and applications.

On-Surface Self-Assembly Kinetic Study of Cu-Hexaazatriphenylene 2D Conjugated Metal-Organic Frameworks on Coinage Metals and MoS2 Substrates

Supramolecular coordination self-assembly on solid surfaces provides an effective route to form two-dimensional (2D) metal-organic frameworks (MOFs). In such processes, surface-adsorbate interaction plays a key role in determining the MOFs' structural and chemical properties. Here, we conduct a systematic study of Cu-HAT (HAT = 1,4,5,8,9,12-hexaazatriphenylene) 2D conjugated MOFs (c-MOFs) self-assembled on Cu(111), Au(111), Ag(111), and MoS2 substrates. Using scanning tunneling microscopy and density functional theory calculations, we found that the as-formed Cu3HAT2 c-MOFs on the four substrates exhibit distinctive structural features including lattice constant and molecular conformation. The structural variations can be attributed to the differentiated substrate effects on the 2D c-MOFs, including adsorption energy, lattice commensurability, and surface reactivity. Specifically, the framework grown on MoS2 is nearly identical to its free-standing counterpart. This suggests that the 2D van der Waals (vdW) materials are good candidate substrates for building intrinsic 2D MOFs, which hold promise for next-generation electronic devices.

DNA-mediated assembly of Au bipyramids into anisotropic light emitting kagome superlattices

Colloidal crystal engineering with DNA allows one to design diverse superlattices with tunable lattice symmetry, composition, and spacing. Most of these structures follow the complementary contact model, maximizing DNA hybridization on building blocks and producing relatively close-packed lattices. Here, low-symmetry kagome superlattices are assembled from DNA-modified gold bipyramids that can engage only in partial DNA surface matching. The bipyramid dimensions and DNA length can be engineered for two different superlattices with rhombohedral unit cells, including one composed of a periodic stacking of kagome lattices. Enabled by the partial facet alignment, the kagome lattices exhibit lattice distortion, bipyramid twisting, and planar chirality. When conjugated with Cy-5 dyes, the kagome lattices serve as cavities with high-density optical states and large Purcell factors along lateral directions, leading to strong dipole radiation along the z axis and facet-dependent light emission. Such complex optical properties make these materials attractive for lasers, displays, and quantum sensing constructs.

Self-deployable contracting-cord metamaterials with tunable mechanical properties

Recent advances in active materials and fabrication techniques have enabled the production of cyclically self-deployable metamaterials with an expanded functionality space. However, designing metamaterials that possess continuously tunable mechanical properties after self-deployment remains a challenge, notwithstanding its importance. Inspired by push puppets, we introduce an efficient design strategy to create reversibly self-deployable metamaterials with continuously tunable post-deployment stiffness and damping. Our metamaterial comprises contracting actuators threaded through beads with matching conical concavo-convex interfaces in networked chains. The slack network conforms to arbitrary shapes, but when actuated, it self-assembles into a preprogrammed configuration with beads gathered together. Further contraction of the actuators can dynamically tune the assembly's mechanical properties through the beads' particle jamming, while maintaining the overall structure with minimal change. We show that, after deployment, such metamaterials exhibit pronounced tunability in bending-dominated configurations: they can become more than 35 times stiffer and change their damping capability by over 50%. Through systematic analysis, we find that the beads' conical angle can introduce geometric nonlinearity, which has a major effect on the self-deployability and tunability of the metamaterial. Our work provides routes towards reversibly self-deployable, lightweight, and tunable metamaterials, with potential applications in soft robotics, reconfigurable architectures, and space engineering.

Tailor-Made Polysaccharides for Biomedical Applications

Polysaccharides (PSAs) are carbohydrate-based macromolecules widely used in the biomedical field, either in their pure form or in blends/nanocomposites with other materials. The relationship between structure, properties, and functions has inspired scientists to design multifunctional PSAs for various biomedical applications by incorporating unique molecular structures and targeted bulk properties. Multiple strategies, such as conjugation, grafting, cross-linking, and functionalization, have been explored to control their mechanical properties, electrical conductivity, hydrophilicity, degradability, rheological features, and stimuli-responsiveness. For instance, custom-made PSAs are known for their worldwide biomedical applications in tissue engineering, drug/gene delivery, and regenerative medicine. Furthermore, the remarkable advancements in supramolecular engineering and chemistry have paved the way for mission-oriented biomaterial synthesis and the fabrication of customized biomaterials. These materials can synergistically combine the benefits of biology and chemistry to tackle important biomedical questions. Herein, we categorize and summarize PSAs based on their synthesis methods, and explore the main strategies used to customize their chemical structures. We then highlight various properties of PSAs using practical examples. Lastly, we thoroughly describe the biomedical applications of tailor-made PSAs, along with their current existing challenges and potential future directions.

Escaping Kinetic Traps Using Nonreciprocal Interactions

Kinetic traps are a notorious problem in equilibrium statistical mechanics, where temperature quenches ultimately fail to bring the system to low energy configurations. Using multifarious self-assembly as a model system, we introduce a mechanism to escape kinetic traps by utilizing nonreciprocal interactions between components. Introducing nonequilibrium effects offered by broken action-reaction symmetry in the system pushes the trajectory of the system out of arrested dynamics. The dynamics of the model is studied using tools from the physics of interfaces and defects. Our proposal can find applications in self-assembly, glassy systems, and systems with arrested dynamics to facilitate escape from local minima in rough energy landscapes.

Choreographing Oscillatory Hydrodynamics with DNA-Coated Gold Nanoparticles

Periodic responses to nonperiodic energy inputs, such as oscillations, are hallmarks of living systems. Nanoparticle-based systems have largely remained unexplored in the generation of oscillatory features. Here, we demonstrate a nanosystem featuring hierarchical response to light, where thermoplasmonic effects and reversible DNA-hybridization generate thermal convective forces and ultimately, oscillatory hydrodynamic flows. The slow aggregation of gold nanoparticles (AuNPs) serves as a positive feedback, while fast photothermal disassembly acts as negative feedback. These asymmetric feedback loops, combined with thermal hysteresis for time-delay, are essential ingredients for orchestrating an oscillating response.

Nanopipette dynamic microscopy unveils nano coffee ring

Liquid-phase electron microscopy (LP-EM) imaging has revolutionized our understanding of nanosynthesis and assembly. However, the current closed geometry limits its application for open systems. The ubiquitous physical process of the coffee-ring phenomenon that underpins materials and engineering science remains elusive at the nanoscale due to the lack of experimental tools. We introduce a quartz nanopipette liquid cell with a tunable dimension that requires only standard microscopes. Depending on the imaging condition, the open geometry of the nanopipette allows the imaging of evaporation-induced pattern formation, but it can also function as an ordinary closed-geometry liquid cell where evaporation is negligible despite the nano opening. The nano coffee-ring phenomenon was observed by tracking individual nanoparticles in an evaporating nanodroplet created from a thin liquid film by interfacial instability. Nanoflows drive the assembly and disruption of a ring pattern with the absence of particle-particle correlations. With surface effects, nanoflows override thermal fluctuations at tens of nanometers, in which nanoparticles displayed a "drunken man trajectory" and performed work at a value much smaller than kBT.

Economical routes to size-specific assembly of self-closing structures

Programmable self-assembly has seen an explosion in the diversity of synthetic crystalline materials, but developing strategies that target "self-limiting" assemblies has remained a challenge. Among these, self-closing structures, in which the local curvature defines the finite global size, are prone to polymorphism due to thermal bending fluctuations, a problem that worsens with increasing target size. Here, we show that assembly complexity can be used to eliminate this source of polymorphism in the assembly of tubules. Using many distinct components, we prune the local density of off-target geometries, increasing the selectivity of the tubule width and helicity to nearly 100%. We further show that by reducing the design constraints to target either the pitch or the width alone, fewer components are needed to reach complete selectivity. Combining experiments with theory, we reveal an economical limit, which determines the minimum number of components required to create arbitrary assembly sizes with full selectivity.

Mimicking nature to develop halide perovskite semiconductors from proteins and metal carbonates

Halide perovskite (HPs) nanostructures have recently gained extensive worldwide attentions because of their remarkable optoelectronic properties and fast developments. However, intrinsic instability against environmental factors-i.e., temperature, humidity, illumination, and oxygen-restricted their real-life applications. HPs are typically synthesized as colloids by employing organic solvents and ligands. Consequently, the precise control and tuning of complex 3D perovskite morphologies are challenging and have hardly been achieved by conventional fabrication methods. Here, we combine the benefits of self-assembly of biomolecules and an ion exchange reaction (IER) approach to customize HPs spatial shapes and composition. Initially, we apply a biomineralization approach, using biological templates (such as biopolymers, proteins, or protein assemblies), modulating the morphology of MCO3 (M = Ca2+, Ba2+) nano/microstructures. We then show that the morphology of the materials can be maintained throughout an IER process to form surface HPs with a wide variety of morphologies. The fabricated core-shell structures of metal carbonates and HPs introduce nano/microcomposites that can be sculpted into a wide diversity of 3D architectures suitable for various potential applications such as sensors, detectors, catalysis, etc. As a prototype, we fabricate disposable humidity sensors with an 11-95% detection range by casting the formed bio-templated nano/micro-composites on paper substrate.

Chemical composition from photos: Dried solution drops reveal a morphogenetic tree

Under nonequilibrium conditions, inorganic systems can produce a wealth of life-like shapes and patterns which, compared to well-formed crystalline materials, remain widely unexplored. A seemingly simple example is the formation of salt deposits during the evaporation of sessile droplets. These evaporites show great variations in their specific patterns including single rings, creep, small crystals, fractals, and featureless disks. We have explored the patterns of 42 different salts at otherwise constant conditions. Based on 7,500 images, we show that distinct pattern families can be identified and that some salts (e.g., Na2SO4 and NH4NO3) are bifurcated creating two distinct motifs. Family affiliations cannot be predicted a priori from composition alone but rather emerge from the complex interplay of evaporation, crystallization, thermodynamics, capillarity, and fluid flow. Nonetheless, chemical composition can be predicted from the deposit pattern with surprisingly high accuracy even if the set of reference images is small. These findings suggest possible applications including smartphone-based analyses and lightweight tools for space missions.

Structural Phase Separation of Membranes and Fibers

Lipid membranes interact with protein filaments on a superstructural level such that they may colocalize or spatially segregate in a living cell, whereas higher-order organization of membranes and fibers is less well explored in artificial systems. Herein, we report on the structural separation of a dispersed, membranous phase and a continuous, fibrous phase in a synthetic system. Systematic characterization of its thermodynamics and kinetics uncovers a physical principle governing phase separation: Interlamellar repulsion, favoring expansion of the membranous phase, is balanced by fibrous network elasticity, preferring the opposite. A direct consequence of this principle is the spatial addressability of the phase separation, preferably localized to soft regions of the fibrous network. Guided by this principle, we design a fibrous network with different spatial heterogeneity to modulate the phase separation, realizing a "memory" effect, patterned separation, and gradient separation. The current spatially addressable phase separation is in great contrast to the conventional ones, in which nucleation is difficult to predict or control. The fact that the membranous and fibrous phases compete for space has implications for the intracellular interactions between endoplasmic reticulum membranes and cytoskeletal filaments.

Designing Complex Tapestries with Photography-Inspired Manipulation of Self-Organized Thin-Films

Thin-films patterned with complex motifs are of fundamental interest because of their advanced optical, mechanical and electronic properties, but fabrication of these materials remains challenging. Self-organization strategies, such as immersion controlled reaction-diffusion patterning, have shown great potential for production of patterned thin-films. However, the autonomous nature of such processes limits controllable pattern customizability and complexity. Here, it is demonstrated that photography inspired manipulation processes can overcome this limitation to create highly-complex tapestries of micropatterned films (MPF's). Inspired by classical photographic processes, MPF's are developed, bleached, exposed, fixed, and contoured into user-defined shapes and photographic toning reactions are used to convert the chemical composition MPF's, while preserving the original stripe patterns. By applying principles of composite photography, highly complex tapestries composed of multiple MPF layers are designed, where each layer can be individually manipulated into a specific shape and composition. By overcoming fundamental limitations, this synergistic approach broadens the design possibilities of reaction-diffusion processes, furthering the potential of self-organization strategies for the development of complex materials.

Interactions and pattern formation in a macroscopic magnetocapillary SALR system of mermaid cereal

When particles are deposited at a fluid interface they tend to aggregate by capillary attraction to minimize the overall potential energy of the system. In this work, we embed floating millimetric disks with permanent magnets to introduce a competing repulsion effect and study their pattern formation in equilibrium. The pairwise energy landscape of two disks is described by a short-range attraction and long-range repulsion (SALR) interaction potential, previously documented in a number of microscopic condensed matter systems. Such competing interactions enable a variety of pairwise equilibrium states, including the possibility of a local minimum energy corresponding to a finite disk spacing. Two-dimensional (2D) experiments and simulations in confined geometries demonstrate that as the areal packing fraction is increased, the dilute repulsion-dominated lattice state becomes unstable to the spontaneous formation of localized clusters, which eventually merge into a system-spanning striped pattern. Finally, we demonstrate that the equilibrium pattern can be externally manipulated by the application of a supplemental vertical magnetic force that remotely enhances the effective capillary attraction.

Binding Site Programmable Self-Assembly of 3D Hierarchical DNA Origami Nanostructures

DNA nanotechnology has broad applications in biomedical drug delivery and programmable materials. Characterization of the self-assembly of DNA origami and quantum dots (QDs) is necessary for the development of new DNA-based nanostructures. We use computation and experiment to show that the self-assembly of 3D hierarchical nanostructures can be controlled by programming the binding site number and their positions on DNA origami. Using biotinylated pentagonal pyramid wireframe DNA origamis and streptavidin capped QDs, we demonstrate that DNA origami with 1 binding site at the outer vertex can assemble multimeric origamis with up to 6 DNA origamis on 1 QD, and DNA origami with 1 binding site at the inner center can only assemble monomeric and dimeric origamis. Meanwhile, the yield percentages of different multimeric origamis are controlled by the QD:DNA-origami stoichiometric mixing ratio. DNA origamis with 2 binding sites at the αγ positions (of the pentagon) make larger nanostructures than those with binding sites at the αβ positions. In general, increasing the number of binding sites leads to increases in the nanostructure size. At high DNA origami concentration, the QD number in each cluster becomes the limiting factor for the growth of nanostructures. We find that reducing the QD size can also affect the self-assembly because of the reduced access to the binding sites from more densely packed origamis.

Deconstructing synthetic biology across scales: a conceptual approach for training synthetic biologists

Synthetic biology allows us to reuse, repurpose, and reconfigure biological systems to address society's most pressing challenges. Developing biotechnologies in this way requires integrating concepts across disciplines, posing challenges to educating students with diverse expertise. We created a framework for synthetic biology training that deconstructs biotechnologies across scales-molecular, circuit/network, cell/cell-free systems, biological communities, and societal-giving students a holistic toolkit to integrate cross-disciplinary concepts towards responsible innovation of successful biotechnologies. We present this framework, lessons learned, and inclusive teaching materials to allow its adaption to train the next generation of synthetic biologists.

Vesicle Hydrogels Formed from the Perfluorononanoic Acid/Tetradecyl Dimethylaminoxide Oxide System

Vesicle hydrogels are supramolecular structures formed by the self-assembly of surfactant molecules in solution, which have great application prospects. The phase behavior of perfluorononanoic acid (C8F17COOH) and an amphoteric hydrocarbon surfactant, tetradecyl dimethylaminoxide (C14DMAO), in an aqueous solution has been studied. By changing the mixing ratio and concentration of C8F17COOH and C14DMAO, the phase diagram of the system was drawn, and interestingly, a hydrogel composed of polyhedral and spherical vesicles was successfully constructed. The formation mechanism of the polyhedral and spherical vesicle hydrogel was studied by differential scanning calorimetry (DSC), small-angle X-ray diffraction (XRD), wide-angle X-ray scattering (WAXS), and 1H nuclear magnetic resonance (1H NMR) measurements, and the rheological properties and influencing factors of the hydrogel were systematically investigated. The formation of the vesicle hydrogels in this system was considered to be caused by the "cocrystallization" of two surfactant molecular chains.

Isothermal Phase Transitions in Liquid Crystals Driven by Dynamic Covalent Chemistry

The dynamic nature of calamitic liquid crystals is exploited to perform isothermal phase transitions driven by dynamic covalent chemistry. For this purpose, nematic (N) arrays based on aldehyde 1 were treated with different amines (A-E) in an on-surface process, which resulted in different isothermal phase transitions. These phase transformations were caused by in situ imination reactions and are dependent on the nature of the added amine. Transitions from the N to crystal (1A, 1E), isotropic (1B), and smectic (Sm) (1C, 1D) phases were achieved, while the resulting materials feature thermotropic liquid crystal behavior. A sequential transformation from the N 1 to the Sm 1C and then to the N 1B was achieved by coupling an imination to a transimination processes and adjusting the temperature. All of these processes were well characterized by microscopic, spectroscopic, and X-ray techniques, unlocking not only the constitutional but also the structural aspects of the phase transitions. This work provides new insights into designing constitutionally and structurally adaptable liquid crystal systems, paving the way toward the conception of programable evolutive pathways and adaptive materials.

Amphiphilic Superspreading Polymer Membranes Prepared by Capillary Force-Driven Self-Assembly

To overcome the two main obstacles of large-scale application of superspreading material, self assembly is used to prepare superspreading polymer membrane (SPPM) in this work. An amphiphilic SPPM is prepared by capillary force-driven self assembly using PP melt-blown nonwovens and polyvinyl alcohol (PVA). The prepared SPPM has low preparation cost and stable performance since self assembly needs low energy consumption, and the production is thermodynamically stable. By using cryo-electron microscopy, transmission electron microscopy, X-ray photoelectron spectrum and scanning electron microscope with energy dispersive X-ray spectroscopy. It is proved that PVA is successfully assembled on the fiber surface of PP melt-blown nonwovens. The prepared SPPM has excellent spreading performance, the "spreading times" of both water and oil are less than 0.5 s. They showed much superior performance compared to traditional materials when applied in oil-water separation, seawater desalination, and ion separation. This work will definitely promote the development of self assembly, superspreading materials, and related sciences.

Randomizing the growth of silica nanofibers for whiteness

In colloids, the shape influences the function. In silica, straight nanorods have already been synthesized from water-in-oil emulsions. By contrast, curly silica nanofibers have been less reported because the underlying growth mechanism remains unexplored, hindering further morphology control for applications. Herein, we describe the synthetic protocol for silica nanofibers with a tunable curliness based on the control of the water-in-oil emulsion droplets. Systematically decreasing the droplet size and increasing their contact angle, the Brownian motion of the droplets intensifies during the silica growth, thus increasing the random curliness of the nanofibers. This finding is supported by simplistic theoretical arguments and experimentally verified by varying the temperature to finely tune the curliness. Assembling these nanofibers toward porous disordered films enhances multiple scattering in the visible range, resulting in increased whiteness in contrast to films constructed by spherical and rod-like building units, which can be useful for, e.g., coatings and pigments.

Lysosomal Peptide Self-Assembly to Control Cell Behavior

Lysosomes are membrane-enclosed organelles that play key roles in degrading and recycling cellular debris, cellular signaling, and energy metabolism processes. Confinement of amphiphilic peptides in the lysosome to construct functional nanostructures through noncovalent interactions is an emerging approach to tune the homeostasis of lysosome. After briefly introducing the importance of lysosome and its functions, we discuss the advantages of lysosomal nanostructure formation for disease therapy. We next discuss the strategy for triggering the self-assembly of peptides in the lysosome, followed by a concise outlook of the future perspective about this emerging research direction.

Host-Guest Stimuli-Responsive Click Chemistry

Click chemistry has reached its maturity as the weapon of choice for the irreversible ligation of molecular fragments, with over 20 years of research resulting in the development or improvement of highly efficient kinetically controlled conjugation reactions. Nevertheless, traditional click reactions can be disadvantageous not only in terms of efficiency (side products, slow kinetics, air/water tolerance, etc.), but also because they completely avoid the possibility to reversibly produce and control bound/unbound states. Recently, non-covalent click chemistry has appeared as a more efficient alternative, in particular by using host-guest self-assembled systems of high thermodynamic stability and kinetic lability. This review discusses the implementation of molecular switches in the development of such non-covalent ligation processes, resulting in what we have termed stimuli-responsive click chemistry, in which the bound/unbound constitutional states of the system can be favored by external stimulation, in particular using host-guest complexes. As we exemplify with handpicked selected examples, these supramolecular systems are well suited for the development of human-controlled molecular conjugation, by coupling thermodynamically regulated processes with appropriate temporally resolved extrinsic control mechanisms, thus mimicking nature and advancing our efforts to develop a more function-oriented chemical synthesis.

Oversaturating Liquid Interfaces with Nanoparticle-Surfactants

Assemblies of nanoparticles at liquid interfaces hold promise as dynamic "active" systems when there are convenient methods to drive the system out of equilibrium via crowding. To this end, we show that oversaturated assemblies of charged nanoparticles can be realized and held in that state with an external electric field. Upon removal of the field, strong interparticle repulsive forces cause a high in-plane electrostatic pressure that is released in an explosive emulsification. We quantify the packing of the assembly as it is driven into the oversaturated state under an applied electric field. Physiochemical conditions substantially affect the intensity of the induced explosive emulsification, underscoring the crucial role of interparticle electrostatic repulsion.

Modular Assembly of Metamaterials Using Light Gradients

This is a report on a pilot study that tests the feasibility of assembling photonic metamaterials (PMs) using light gradient forces. Following a strategy that works like modular construction, light gradient forces, produced by a tightly focused, 1D standing wave optical trap, time-multiplexed across a 2D lattice are used to assemble voxels consisting of prefabricated, monodispersed nanoparticles (NPs) with radii ranging from 30 to 500 nm into 3D structures on a hydrogel scaffold. Hundreds of NPs can be manipulated concurrently into a complex heterogeneous voxel this way, and then the process can be repeated by stitching together voxels to form a metamaterial of any size, shape, and constituency although imperfectly. Imperfections introduce random phase shifts and amplitude variations that can have an adverse effect on the band structure. Regardless, PMs are created this way using two different dielectric NPs, polystyrene and rutile, and then the near-infrared performance for each is analyzed with angle-, wavelength-, and polarization-dependent reflection spectroscopy. The cross-polarized spectra show evidence of a resonance peak. Interestingly, whereas the line shape from the polystyrene array is symmetric, the rutile array is not, which may be indicative of Fano resonance. So, even with the structural defects, reflection spectroscopy reveals a resonance.

The intramolecular self-assembly of bidesmosidic kalopanaxsaponins

The phenomena of intramolecular self-assembly of bidesmosidic kalopanaxsaponins was identified for the first time in this paper. NMR (1H-NMR, NOESY), transmission electron microscopy (TEM), and molecular dynamics (MD) simulation techniques were used to compare the spatial structures of bidesmosidic kalopanaxsaponins and monodesmosidic kalopanaxsaponins. The results showed that the bidesmosidic kalopanaxsaponins formed a clustered and twisted structure in space, whereas the monodesmosidic kalopanaxsaponins were in an extended state. This discovery confirmed the presence of intramolecular self-assembly in bidesmosidic kalopanaxsaponins.

A compound eye-like morphology formed through hexagonal array of hemispherical microparticles where an alkyl-fullerene derivative self-assembled at atmosphere-sealed air/water interface

Self-assembly processes are widely used in nature to form hierarchically organized structures, prompting us to investigate such processes at the macroscopic scale. We report an unprecedented approach toward the self-assembly of alkyl-fullerene (C60) derivatives into a hexagonal array of hemispherical microparticles akin to the morphology of a compound eye. The method includes casting solvated alkyl-C60compound on an air/water interface followed by controlled evaporation of the solvent under atmosphere-sealed conditions. This leads to the formation of a thin film floating on water with a diameter of up to 1.3 centimeters and exhibiting a hexagonally-packed hemispherical structure with a diameter of approximately 38µm. Various measurements of the formed film reveal that amorphousness is necessary for suppressing uncontrollable crystallization, which affects the microparticle size and film formation mechanism. We tested the feasibility of this approach for the self-assembly of a relatively common C60derivative, [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), resulting in the formation of a film with a similar pattern of hexagonally-packed larger microparticles approximately 152µm in size of diameter.

Enzymatic Reaction-Coupled, Cooperative Supramolecular Polymerization

Nature employs sophisticated mechanisms to precisely regulate self-assembly and functions within biological systems, exemplified by the formation of cytoskeletal filaments. Various enzymatic reactions and auxiliary proteins couple with the self-assembly process, meticulously regulating the length and functions of resulting macromolecular structures. In this context, we present a bioinspired, reaction-coupled approach for the controlled supramolecular polymerization in synthetic systems. To achieve this, we employ an enzymatic reaction that interfaces with the adenosine triphosphate (ATP)-templated supramolecular polymerization of naphthalene diimide monomers (NSG). Notably, the enzymatic production of ATP (template) plays a pivotal role in facilitating reaction-controlled, cooperative growth of the NSG monomers. This growth process, in turn, provides positive feedback to the enzymatic production of ATP, creating an ideal reaction-coupled assembly process. The success of this approach is further evident in the living-growth characteristic observed during seeding experiments, marking this method as the pioneering instance where reaction-coupled self-assembly precisely controls the growth kinetics and structural aspects of supramolecular polymers in a predictive manner, akin to biological systems.

Exploring the Synthesis of Self-Organization and Active Motion

Proteins, genetic material, and membranes are fundamental to all known organisms, yet these components alone do not constitute life. Life emerges from the dynamic processes of self-organization, assembly, and active motion, suggesting the existence of similar artificial systems. Against this backdrop, our Perspective explores a variety of chemical phenomena illustrating how nonequilibrium self-organization and micromotors contribute to life-like behavior and functionalities. After explaining key terms, we discuss specific examples including enzymatic motion, diffusiophoretic and bubble-driven self-propulsion, pattern-forming reaction-diffusion systems, self-assembling inorganic aggregates, and hierarchically emergent phenomena. We also provide a roadmap for combining self-organization and active motion and discuss possible outcomes through biological analogs. We suggest that this research direction, deeply rooted in physical chemistry, offers opportunities for further development with broad impacts on related sciences and technologies.

Heterogeneous Sensor-Carrier Microswarms for Collaborative Precise Drug Delivery toward Unknown Targets with Localized Acidosis

Micro/nanorobots hold the potential to revolutionize biomedicine by executing diverse tasks in hard-to-reach biological environments. Nevertheless, achieving precise drug delivery to unknown disease sites using swarming micro/nanorobots remains a significant challenge. Here we develop a heterogeneous swarm comprising sensing microrobots (sensor-bots) and drug-carrying microrobots (carrier-bots) with collaborative tasking capabilities for precise drug delivery toward unknown sites. Leveraging robust interspecific hydrodynamic interactions, the sensor-bots and carrier-bots spontaneously synchronize and self-organize into stable heterogeneous microswarms. Given that the sensor-bots can create real-time pH maps employing pH-responsive structural-color changes and the doxorubicin-loaded carrier-bots exhibit selective adhesion to acidic targets via pH-responsive charge reversal, the sensor-carrier microswarm, when exploring unknown environments, can detect and localize uncharted acidic targets, guide itself to cover the area, and finally deploy therapeutic carrier-bots precisely there. This versatile platform holds promise for treating diseases with localized acidosis and inspires future theranostic microsystems with expandability, task flexibility, and high efficiency.

Selectively advantageous instability in biotic and pre-biotic systems and implications for evolution and aging

Rules of biology typically involve conservation of resources. For example, common patterns such as hexagons and logarithmic spirals require minimal materials, and scaling laws involve conservation of energy. Here a relationship with the opposite theme is discussed, which is the selectively advantageous instability (SAI) of one or more components of a replicating system, such as the cell. By increasing the complexity of the system, SAI can have benefits in addition to the generation of energy or the mobilization of building blocks. SAI involves a potential cost to the replicating system for the materials and/or energy required to create the unstable component, and in some cases, the energy required for its active degradation. SAI is well-studied in cells. Short-lived transcription and signaling factors enable a rapid response to a changing environment, and turnover is critical for replacement of damaged macromolecules. The minimal gene set for a viable cell includes proteases and a nuclease, suggesting SAI is essential for life. SAI promotes genetic diversity in several ways. Toxin/antitoxin systems promote maintenance of genes, and SAI of mitochondria facilitates uniparental transmission. By creating two distinct states, subject to different selective pressures, SAI can maintain genetic diversity. SAI of components of synthetic replicators favors replicator cycling, promoting emergence of replicators with increased complexity. Both classical and recent computer modeling of replicators reveals SAI. SAI may be involved at additional levels of biological organization. In summary, SAI promotes replicator genetic diversity and reproductive fitness, and may promote aging through loss of resources and maintenance of deleterious alleles.

Regioselective synthesis of 4-arylamino-1,2-naphthoquinones in eutectogel as a confined reaction medium using LED light

Predicting selectivity and conversion in a confined reaction medium under photochemical conditions is highly challenging as compared to the corresponding conventional synthesis. Herein, we report the use of a simple carbohydrate-derived eutectogel to facilitate LED-light-induced regioselective synthesis of 4-arylamino-1,2-naphthoquinones in good yield. This methodology, by including a reusable reaction medium, proved to have the potential of affording the regioselective formation of various desired products in good yields.

Amyloid-like Aggregation of Wheat Gluten and Its Components during Cooking: Mechanisms and Structural Characterization

Amyloid-like aggregation widely occurs during the processing and production of natural proteins, with evidence indicating its presence following the thermal processing of wheat gluten. However, significant gaps remain in understanding the underlying fibrillation mechanisms and structural polymorphisms. In this study, the amyloid-like aggregation behavior of wheat gluten and its components (glutenin and gliadin) during cooking was systematically analyzed through physicochemical assessment and structural characterization. The presence of amyloid-like fibrils (AFs) was confirmed using X-ray diffraction and Congo red staining, while Thioflavin T fluorescence revealed different patterns and rates of AFs growth among wheat gluten, glutenin, and gliadin. AFs in gliadin exhibited linear growth curves, while those in gluten and glutenin showed S-shaped curves, with the shortest lag phase and fastest growth rate (t1/2 = 2.11 min) observed in glutenin. Molecular weight analyses revealed AFs primarily in the 10-15 kDa range, shifting to higher weights over time. Glutenin-derived AFs had the smallest ζ-potential value (-19.5 mV) and the most significant size increase post cooking (approximately 400 nm). AFs in gluten involve interchain reorganization, hydrophobic interactions, and conformational transitions, leading to additional cross β-sheets. Atomic force microscopy depicted varying fibril structures during cooking, notably longer, taller, and stiffer AFs from glutenin.

Tunable Macroscopic Alignment of Self-Assembling Peptide Nanofibers

Progress in the design and synthesis of nanostructured self-assembling systems has facilitated the realization of numerous nanoscale geometries, including fibers, ribbons, and sheets. A key challenge has been achieving control across multiple length scales and creating macroscopic structures with nanoscale organization. Here, we present a facile extrusion-based fabrication method to produce anisotropic, nanofibrous hydrogels using self-assembling peptides. The application of shear force coinciding with ion-triggered gelation is used to kinetically trap supramolecular nanofibers into aligned, hierarchical macrostructures. Further, we demonstrate the ability to tune the nanostructure of macroscopic hydrogels through modulating phosphate buffer concentration during peptide self-assembly. In addition, increases in the nanostructural anisotropy of fabricated hydrogels are found to enhance their strength and stiffness under hydrated conditions. To demonstrate their utility as an extracellular matrix-mimetic biomaterial, aligned nanofibrous hydrogels are used to guide directional spreading of multiple cell types, but strikingly, increased matrix alignment is not always correlated with increased cellular alignment. Nanoscale observations reveal differences in cell-matrix interactions between variably aligned scaffolds and implicate the need for mechanical coupling for cells to understand nanofibrous alignment cues. In total, innovations in the supramolecular engineering of self-assembling peptides allow us to decouple nanostructure from macrostructure and generate a gradient of anisotropic nanofibrous hydrogels. We anticipate that control of architecture at multiple length scales will be critical for a variety of applications, including the bottom-up tissue engineering explored here.

Crystallization-Inspired Design and Modeling of Self-Assembly Lattice-Formation Swarm Robotics

Self-assembly formation is a key research topic for realizing practical applications in swarm robotics. Due to its inherent complexity, designing high-performance self-assembly formation strategies and proposing corresponding macroscopic models remain formidable challenges and present an open research frontier. Taking inspiration from crystallization, this paper introduces a distributed self-assembly formation strategy by defining free, moving, growing, and solid states for robots. Robots in these states can spontaneously organize into user-specified two-dimensional shape formations with lattice structures through local interactions and communications. To address the challenges posed by complex spatial structures in modeling a macroscopic model, this work introduces the structural features estimation method. Subsequently, a corresponding non-spatial macroscopic model is developed to predict and analyze the self-assembly behavior, employing the proposed estimation method and a stock and flow diagram. Real-robot experiments and simulations validate the flexibility, scalability, and high efficiency of the proposed self-assembly formation strategy. Moreover, extensive experimental and simulation results demonstrate the model's accuracy in predicting the self-assembly process under different conditions. Model-based analysis indicates that the proposed self-assembly formation strategy can fully utilize the performance of individual robots and exhibits strong self-stability.

Nanoscale assembly of enantiomeric supramolecular gels driven by the nature of solvents

Understanding the key parameters that control the self-assembly process is critical to predict self-assembly modes in multi-component systems, which will lead to the development of nanofibrous materials with tuneable properties. Enantiomeric amino acid-based low-molecular-weight gelators (LMWGs) were mixed in polar (polar protic) and aromatic apolar (aromatic) solvents and compared to their individual counterparts to probe the effect of solvent polarity on the self-assembly process. Scanning electron microscopy (SEM) reveals that xerogels of individual components display hollow needles in polar protic solvents, while chiral coils are observed in aromatic solvents. In contrast, the multi-component gel displays hollow needle morphologies in both solvents, indicating similar morphologies in polar protic solvents but an entirely different nanostructure for the individual gel networks in aromatic solvents. PXRD experiments performed on the dried gels showed that the nature of the solvents plays a vital role in the co-assembly process of multi-component gels. The self-assembly modes and the gel state structure of the gels are analysed by wide-angle X-ray diffraction (WAXS) and small-angle neutron diffraction (SANS), which reveals that the mixed gel undergoes different co-assembly modes depending on the nature of the solvent systems. This study shows that different co-assembly modes can be achieved for structurally similar components by varying the solvent polarity, demonstrating the importance of solvent choice in the self-assembly process of multi-component gels.

Recent Progress of Supramolecular Chemotherapy Based on Host-Guest Interactions

Chemotherapy is widely recognized as an effective approach for treating cancer due to its ability to eliminate cancer cells using chemotherapeutic drugs. However, traditional chemotherapy suffers from various drawbacks, including limited solubility and stability of drugs, severe side effects, low bioavailability, drug resistance, and challenges in tracking treatment efficacy. These limitations greatly hinder its widespread clinical application. In contrast, supramolecular chemotherapy, which relies on host-guest interactions, presents a promising alternative by offering highly efficient and minimally toxic anticancer drug delivery. In this review, an overview of recent advancements in supramolecular chemotherapy based on host-guest interactions is provided. The significant role it plays in guiding cancer therapy is emphasized. Drawing on a wealth of cutting-edge research, herein, a timely and valuable resource for individuals interested in the field of supramolecular chemotherapy or cancer therapy, is presented. Furthermore, this review contributes to the progression of the field of supramolecular chemotherapy toward clinical application.

Design and applications of polymer-like peptides in biomedical nanogels

INTRODUCTION

Polymer nanogels are among the most promising nanoplatforms for use in biomedical applications. The substantial interest for these drug carriers is to enhance the transportation of bioactive substances, reduce the side effects, and achieve optimal action on the curative sites by targeting delivery and triggering the release of the drugs in a controlled and continuous mode.

AREA COVERED

The review discusses the opportunities, applications, and challenges of synthetic polypeptide nanogels in biomedicine, with an emphasis on the recent progress in cancer therapy. It is evidenced by the development of polypeptide nanogels for better controlled drug delivery and release, in complex in vivo microenvironments in biomedical applications.

EXPERT OPINION

Polypeptide nanogels can be developed by choosing the amino acids from the peptide structure that are suitable for the type of application. Using a stimulus - sensitive peptide nanogel, it is possible to obtain the appropriate transport and release of the drug, as well as to achieve desirable therapeutic effects, including safety, specificity, and efficiency. The final system represents an innovative way for local and sustained drug delivery at a specific site of the body.

Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications

Bilayer electrospun fibers aimed to be used for skin tissue engineering applications were fabricated for enhanced cell attachment and proliferation. Different ratios of PHBV-PLLA (70:30, 80:20, and 90:10 w/w) blends were electrospun on previously formed electrospun PHBV membranes to produce their bilayers. The fabricated electrospun membranes were characterized with FTIR, which conformed to the characteristic peaks assigned for both PHBV and PLLA. The surface morphology was evaluated using SEM analysis that showed random fibers with porous morphology. The fiber diameter and pore size were measured in the range of 0.7 ± 0.1 µm and 1.9 ± 0.2 µm, respectively. The tensile properties of the bilayers were determined using an electrodynamic testing system. Bilayers had higher elongation at break (44.45%) compared to the monolayers (28.41%) and improved ultimate tensile strength (7.940 MPa) compared to the PHBV monolayer (2.450 MPa). In vitro cytotoxicity of each of the scaffolds was determined via culturing MC3T3 (pre-osteoblastic cell line) on the membranes. Proliferation was evaluated using the Alamar Blue assay on days 3, 7, and 14, respectively. SEM images of cells cultured on membranes were taken in addition to bright field imaging to visually show cell attachment. Fluorescent nuclear staining performed with DAPI was imaged with an inverted fluorescent microscope. The fabricated bilayer shows high mechanical strength as well as biocompatibility with good cell proliferation and cell attachment, showing potential for skin substitute applications.

Quantum trapping and rotational self-alignment in triangular Casimir microcavities

Casimir torque, a rotational motion driven by zero-point energy minimization, is a problem that attracts notable research interest. Recently, it has been realized using liquid crystal phases and natural anisotropic substrates. However, for natural materials, substantial torque occurs only at van der Waals distances of ~10 nm. Here, we use Casimir self-assembly with triangular gold nanostructures for rotational self-alignment at truly Casimir distances (100 to 200 nm separation). The interplay of repulsive electrostatic and attractive Casimir potentials forms a stable quantum trap, giving rise to a tunable Fabry-Pérot microcavity. This cavity self-aligns both laterally and rotationally to maximize area overlap between templated and floating flakes. The rotational self-alignment is sensitive to the equilibrium distance between the two triangles and their area, offering possibilities for active control via electrostatic screening manipulation. Our self-assembled Casimir microcavities present a versatile and tunable platform for nanophotonic, polaritonic, and optomechanical applications.

Immunomodulatory Peptides for Tumor Treatment

Peptides exhibit various biological activities, including biorecognition, cell targeting, and tumor penetration, and can stimulate immune cells to elicit immune responses for tumor immunotherapy. Peptide self-assemblies and peptide-functionalized nanocarriers can reduce the effect of various biological barriers and the degradation by peptidases, enhancing the efficiency of peptide delivery and improving antitumor immune responses. To date, the design and development of peptides with various functionalities have been extensively reviewed for enhanced chemotherapy; however, peptide-mediated tumor immunotherapy using peptides acting on different immune cells, to the knowledge, has not yet been summarized. Thus, this work provides a review of this emerging subject of research, focusing on immunomodulatory anticancer peptides. This review introduces the role of peptides in the immunomodulation of innate and adaptive immune cells, followed by a link between peptides in the innate and adaptive immune systems. The peptides are discussed in detail, following a classification according to their effects on different innate and adaptive immune cells, as well as immune checkpoints. Subsequently, two delivery strategies for peptides as drugs are presented: peptide self-assemblies and peptide-functionalized nanocarriers. The concluding remarks regarding the challenges and potential solutions of peptides for tumor immunotherapy are presented.

On the origin of cooperativity effects in the formation of self-assembled molecular networks at the liquid/solid interface

In this work we investigate the behaviour of molecules at the nanoscale using scanning tunnelling microscopy in order to explore the origin of the cooperativity in the formation of self-assembled molecular networks (SAMNs) at the liquid/solid interface. By studying concentration dependence of alkoxylated dimethylbenzene, a molecular analogue to 5-alkoxylated isophthalic derivatives, but without hydrogen bonding moieties, we show that the cooperativity effect can be experimentally evaluated even for low-interacting systems and that the cooperativity in SAMN formation is its fundamental trait. We conclude that cooperativity must be a local effect and use the nearest-neighbor Ising model to reproduce the coverage vs. concentration curves. The Ising model offers a direct link between statistical thermodynamics and experimental parameters, making it a valuable tool for assessing the thermodynamics of SAMN formation.