Spatiotemporal light control with active metasurfaces

Ultrafast Modulation of a Nonlocal Semiconductor Metasurface under Spatially Selective Optical Pumping

Time-varying optical metasurfaces have attracted significant research attention for their ability to dynamically modulate the spectral characteristics of light and achieve effects not possible in static systems. Nonlocal metasurfaces, with their spatially extended resonant modes, have the potential to further expand these capabilities by enabling spatially selective modulation. Here, we experimentally explore the application of spatially structured femtosecond laser pumping to modulate a leaky guided mode in a semiconductor metasurface. Using angle-resolved transient transmission spectroscopy, we study the dynamic response of the system across a range of wavelengths and angles of incidence, observing frequency and momentum conversion. When the pumping location is varied, this technique allows for reconstructing the temporal dynamics of the probe pulse propagating in the metasurface mode. Our results not only demonstrate a versatile toolkit for spatiotemporal light control but also provide fundamental insight into the excitation of spatially extended modes in nonlocal metasurfaces.

Au Nanorings/TiO2 NPs@MXene-Based Metasurfaces with a Magnetic Mirror-Modulated ECL Strategy for Extracellular Vesicle Detection

A metasurface as an artificial electromagnetic structure can concentrate optical energy into nanometric volumes to strongly enhance the light-matter interaction, which has been becoming a powerful platform for optical sensing, nonlinear effects, and quantum optics. Herein, we developed a novel hybrid plasmonic-dielectric metasurface consisting of Au nanorings (Au NRs) and TiO2 nanoparticles derived from MXene (TiO2 NPs@MXene). The hybrid metasurface simultaneously benefited from the high near-field enhancement effect of plasmonic materials and the low loss of dielectric materials. Furthermore, the optical modulation efficiency of the hybrid metasurface can be regulated by a magnetic mirror configuration. The magnetic mirror acted like a mirror, confining the electrons to a limited region and increasing the density of the surface plasmon. Moreover, the electrochemiluminescence (ECL) of the Cu2BDC metal-organic framework (Cu2BDC-MOF) served as a light source for the Au NRs/TiO2 NPs@MXene metasurface. Due to the exceptional light manipulation capability of the hybrid metasurface and the coordination of the magnetic mirror, the isotropic ECL signal can be dynamically amplified and converted into polarized emission. Finally, a metasurface-regulated ECL (MECL)-based biosensor with a dual-positive membrane protein recognition strategy was developed for the accurate identification of gastric cancer-derived extracellular vesicles. The novel MECL research opened up a new route in the realization of dynamically tunable metasurfaces for optical sensing and novel nanophotonic devices.

Polarization Independent Dynamic Beam Steering based on Liquid Crystal Integrated Metasurface

Digital Micromirror Devices, extensively employed in projection displays offer rapid, polarization-independent beam steering. However, they are constrained by microelectromechanical system limitations, resulting in reduced resolution, limited beam steering angle and poor stability, which hinder further performance optimization. Liquid Crystal on Silicon technology, employing liquid crystal (LC) and silicon chip technology, with properties of high resolution, high contrast and good stability. Nevertheless, its polarization-dependent issues lead to complex system and low efficiency in device applications. This paper introduces a hybrid integration of metallic metasurface with nematic LC, facilitating a polarization-independent beam steering device capable of large-angle deflections. Employing principles of geometrical phase and plasmonic resonances, the metallic metasurface, coupled with an electronically controlled LC, allows for dynamic adjustment, achieving a maximum deflection of ± 27.1°. Additionally, the integration of an LC-infused dielectric grating for dynamic phase modulation and the metasurface for polarization conversion ensures uniform modulation effects across all polarizations within the device. We verify the device's large-angle beam deflection capability and polarization insensitivity effect in simulations and propose an optimization scheme to cope with the low efficiency of individual diffraction stages.

Incident Angle Sensing and Adaptive Control of Scattering by Intelligent Metasurface

The passive sensing and active control of electromagnetic (EM) waves have always been attractive in electronic and information areas, especially during the intelligent era. Here a new method is presented to achieve the angle sensing of incident wave and adaptive control of backward scattering using the intelligent metasurface. The proposed unit cells have the ability to dynamically manipulate the receiving and reflection of the EM energy respectively. The angle sensing of incident waves can be actualized using the method of compressive sensing based on multiple receiving patterns, which are generated by randomly switching the receiving and reflection states of the unit cells. Afterward, the customized performances of backward scattering waves according to the cognitive incident angle can be realized by controlling the programmable reflective phases of unit cells correspondingly. One prototype composed of the metasurface and the module for sensing and adaptive feedback control is fabricated. The whole intelligent metasurface with customizing the function of retro-reflection or low scattering is measured without human intervention and the good results acquired can verify the validity of the proposed concept and design.

Spatiotemporally modulated full-polarized light emission for multiplexed optical encryption

Spatiotemporal control of full freedoms of polarized light emission is crucial in multiplexed optical computing, encryption and communication. Although recent advancements have been made in active emission or passive conversion of polarized light through solution-processed nanomaterials or metasurfaces, these design paths usually encounter limitations, such as small polarization degrees, low light utilization efficiency, limited polarization states, and lack of spatiotemporal control. Here, we addressed these challenges by integrating the spatiotemporal modulation of the LED device, the precise control and efficient polarization emission through nanomaterial assembly, and the programmable patterning/positioning using 3D printing. We achieved an extremely high degree of polarization for both linearly and circularly polarized emission from ultrathin inorganic nanowires and quantum nanorods thanks to the shear-force-induced alignment effect during the protruding of printing filaments. Real-time polarization modulation covering the entire Poincaré sphere can be conveniently obtained through the programming of the on-off state of each LED pixel. Further, the output polarization states can be encoded by an ordered chiral plasmonic film. Our device provides an excellent platform for multiplexing spatiotemporal polarization information, enabling visible light communication with an exceptionally elevated level of physical layer security and multifunctional encrypted displays that can encode both 2D and 3D information.

Atomic-engineered gradient tunable solid-state metamaterials

Metamaterial has been captivated a popular notion, offering photonic functionalities beyond the capabilities of natural materials. Its desirable functionality primarily relies on well-controlled conditions such as structural resonance, dispersion, geometry, filling fraction, external actuation, etc. However, its fundamental building blocks-meta-atoms-still rely on naturally occurring substances. Here, we propose and validate the concept of gradient and reversible atomic-engineered metamaterials (GRAM), which represents a platform for continuously tunable solid metaphotonics by atomic manipulation. GRAM consists of an atomic heterogenous interface of amorphous host and noble metals at the bottom, and the top interface was designed to facilitate the reversible movement of foreign atoms. Continuous and reversible changes in GRAM's refractive index and atomic structures are observed in the presence of a thermal field. We achieve multiple optical states of GRAM at varying temperature and time and demonstrate GRAM-based tunable nanophotonic devices in the visible spectrum. Further, high-efficiency and programmable laser raster-scanning patterns can be locally controlled by adjusting power and speed, without any mask-assisted or complex nanofabrication. Our approach casts a distinct, multilevel, and reversible postfabrication recipe to modify a solid material's properties at the atomic scale, opening avenues for optical materials engineering, information storage, display, and encryption, as well as advanced thermal optics and photonics.

Second harmonic generation at a time-varying interface

Time-varying metamaterials rely on large and fast changes of the linear permittivity. Beyond the linear terms, however, the effect of a non-perturbative modulation of the medium on harmonic generation remains largely unexplored. In this work, we study second harmonic generation at an optically pumped time-varying interface between air and a 310 nm Indium Tin Oxide film. We observe a modulation contrast at the second harmonic wavelength up to 93% for a pump intensity of 100 GW/cm2, leading to large frequency broadening and shift. We experimentally demonstrate that a significant contribution to the enhancement comes from the temporal modulation of the second order nonlinear susceptibility. Moreover, we show the frequency-modulated spectra resulting from single and double-slit time diffraction could be exploited for enhanced optical computing and sensing, enabling broadband time-varying effects on the harmonic signal and extending the application of Epsilon-Near-Zero materials to the visible range.

Electrically Reconfigurable Phase-Change Transmissive Metasurface

Programmable and reconfigurable optics hold significant potential for transforming a broad spectrum of applications, spanning space explorations to biomedical imaging, gas sensing, and optical cloaking. The ability to adjust the optical properties of components like filters, lenses, and beam steering devices could result in dramatic reductions in size, weight, and power consumption in future optoelectronic devices. Among the potential candidates for reconfigurable optics, chalcogenide-based phase change materials (PCMs) offer great promise due to their non-volatile and analogue switching characteristics. Although PCM have found widespread use in electronic data storage, these memory devices are deeply sub-micron-sized. To incorporate phase change materials into free-space optical components, it is essential to scale them up to beyond several hundreds of microns while maintaining reliable switching characteristics. This study demonstrated a non-mechanical, non-volatile transmissive filter based on low-loss PCMs with a 200 × 200 µm2 switching area. The device/metafilter can be consistently switched between low- and high-transmission states using electrical pulses with a switching contrast ratio of 5.5 dB. The device was reversibly switched for 1250 cycles before accelerated degradation took place. The work represents an important step toward realizing free-space reconfigurable optics based on PCMs.

Fully Breaking Entanglement of Multiple Harmonics for Space- and Frequency-Division Multiplexing Wireless Applications via Space-Time-Coding Metasurface

Harmonic generation and utilization are significant topics in nonlinear science. Although the progress in the microwave region has been expedited by the development of time-modulated metasurfaces, one major issue of these devices is the strong entanglement of multiple harmonics, leading to criticism of their use in frequency-division multiplexing (FDM) applications. Previous studies have attempted to overcome this limitation, but they suffer from designing complexity or insufficient controlling capability. Here a new space-time-coding metasurface (STCM) is proposed to independently and precisely synthesize not only the phases but also the amplitudes of various harmonics. This promising feature is successfully demonstrated in wireless space- and frequency-division multiplexing experiments, where modulated and unmodulated signals are simultaneously transmitted via different harmonics using a shared STCM. To illustrate the advantages, binary frequency shift keying (BFSK) and quadrature phase shift keying (QPSK) modulation schemes are respectively implemented. Behind the intriguing functionality, the mechanism of the space-time coding strategy and the analytical designing method are elaborated, which are validated numerically and experimentally. It is believed that the achievements can potentially propel the time-vary metasurfaces in the next-generation wireless applications.

The rise of electrically tunable metasurfaces

Metasurfaces, which offer a diverse range of functionalities in a remarkably compact size, have captured the interest of both scientific and industrial sectors. However, their inherent static nature limits their adaptability for their further applications. Reconfigurable metasurfaces have emerged as a solution to this challenge, expanding the potential for diverse applications. Among the series of tunable devices, electrically controllable devices have garnered particular attention owing to their seamless integration with existing electronic equipment. This review presents recent progress reported with respect to electrically tunable devices, providing an overview of their technological development trajectory and current state of the art. In particular, we analyze the major tuning strategies and discuss the applications in spatial light modulators, tunable optical waveguides, and adaptable emissivity regulators. Furthermore, the challenges and opportunities associated with their implementation are explored, thereby highlighting their potential to bridge the gap between electronics and photonics to enable the development of groundbreaking optical systems.

A surrogate-assisted extended generative adversarial network for parameter optimization in free-form metasurface design

Metasurfaces have widespread applications in fifth-generation (5G) microwave communication. Among the metasurface family, free-form metasurfaces excel in achieving intricate spectral responses compared to regular-shape counterparts. However, conventional numerical methods for free-form metasurfaces are time-consuming and demand specialized expertise. Alternatively, recent studies demonstrate that deep learning has great potential to accelerate and refine metasurface designs. Here, we present XGAN, an extended generative adversarial network (GAN) with a surrogate for high-quality free-form metasurface designs. The proposed surrogate provides a physical constraint to XGAN so that XGAN can accurately generate metasurfaces monolithically from input spectral responses. In comparative experiments involving 20000 free-form metasurface designs, XGAN achieves 0.9734 average accuracy and is 500 times faster than the conventional methodology. This method facilitates the metasurface library building for specific spectral responses and can be extended to various inverse design problems, including optical metamaterials, nanophotonic devices, and drug discovery.

Fast fabrication of a hierarchical nanostructured multifunctional ferromagnet

Materials with multifunctionality affect society enormously. However, the inability to surmount multiple functionality trade-offs limits the discovery of next-generation multifunctional materials. Departing from conventional alloying design philosophy, we present a hierarchical nanostructure (HNS) strategy to simultaneously break multiple performance trade-offs in a material. Using a praseodymium-cobalt (PrCo5) ferromagnet as a proof of concept, the resulting HNS outperforms contemporary high-temperature ferromagnets with a 50 to 138% increase in electrical resistivity while achieving their highest energy density. Our strategy also enables an exceptional thermal stability of coercivity (-0.148%/°C)-a key characteristic for device accuracy and reliability-surpassing that of existing commercial rare-earth magnets. The multifunctionality stems from the deliberately introduced nanohierarchical structure, which activates multiple micromechanisms to resist domain wall movement and electron transport, offering an advanced design concept for multifunctional materials.

Magneto-optical chiral metasurfaces for achieving polarization-independent nonreciprocal transmission

Nonreciprocal transmission, resulting from the breaking of Lorentz reciprocity, plays a pivotal role in nonreciprocal communication systems by enabling asymmetric forward and backward propagations. Metasurfaces endowed with nonreciprocity represent a compact and facile platform for manipulating electromagnetic waves in an unprecedented manner. However, most passive metasurfaces that achieve nonreciprocal transmissions are polarization dependent. While incorporation of active elements or nonlinear materials can achieve polarization-independent nonreciprocal metasurfaces, the complicated configurations limit their practical applications. To address this issue, we propose and demonstrate a passive and linear metasurface that combines magneto-optical and chiral effects, enabling polarization-independent isolation. The designed metasurface achieves a transmittance of up to 80%, with a high contrast between forward and backward propagations. Our work introduces a novel mechanism for nonreciprocal transmission and lays the foundation for the development of compact, polarization-insensitive nonreciprocal devices.

3D Intelligent Cloaked Vehicle Equipped with Thousand-Level Reconfigurable Full-Polarization Metasurfaces

A crucial aspect in shielding a variety of advanced electronic devices from electromagnetic detection involves controlling the flow of electromagnetic waves, akin to invisibility cloaks. Decades ago, the exploration of transformation optics heralded the dawn of modern invisibility cloaks, which has stimulated immense interest across various physical scenarios. However, most prior research is simplified to low-dimensional and stationary hidden objects, limiting their practical applicability in a dynamically changing world. This study develops a 3D large-scale intelligent cloak capable of remaining undetectable even in non-stationary conditions. By employing thousand-level reconfigurable full-polarization metasurfaces, this work has achieved an exceptionally high degree of freedom in sculpting the scattering waves as desired. Serving as the core computational unit, a hybrid inverse design enables the cloaked vehicle to respond in real-time, with a rapid reaction time of just 70 ms. These experiments integrate the cloaked vehicle with a perception-decision-control-execution system and evaluate its performance under random static positions and dynamic travelling trajectories, achieving a background scattering matching degree of up to 93.3%. These findings establish a general paradigm for the next generation of intelligent meta-devices in real-world settings, potentially paving the way for an era of "Electromagnetic Internet of Things."

Loss-Assisted Anomalous Hong-Ou-Mandel Interference Based on Nonunitary Multilayer Graphene

Hong-Ou-Mandel interference is an intrinsic quantum phenomenon that goes beyond the possibilities of classical physics, and enables numerous applications in quantum information science. While the photon-photon interaction is fundamentally limited to the bosonic nature of photons and the restricted phase responses from commonly used unitary optical elements, we present that a nonunitary material provides an alternative degree of freedom to control the two-photon quantum interference, even revealing anomalous quantum interference paths that do not exist in a unitary configuration. An elaborate lossy multilayer graphene that can work as a nonunitary beam splitter is used to explore its tunability over the effective photon-photon interaction in spatial modes, and to verify the particle exchange statistics by its experimental implementation in quantum state filter. This scheme is further extended to observe four-dimensional quantum interference patterns on the lossless and lossy beam splitters, and thus show its applicability even in higher-dimensional Hilbert space.

Bi-Directional Full-Color Generation and Tri-Channel Information Encoding Based on a Plasmonic Metasurface

Dynamic optical structural color is always desired in various display applications and usually involves active materials. Full-color generation, especially bi-directional full-color generation in both reflective and transmissive modes, without any active materials included, has rarely been investigated. Herein, we demonstrate a scheme of bi-directional full-color generation based on a plasmonic metasurface modulated by the rotation of the polarization angle of the incident light without varying the geometry and the optical properties of the materials and the environment where the metasurface resides. The metasurface unit cell consists of plasmonic modules aligning in three directions and is patterned in a square array. The metasurface structural color device is numerically confirmed to generate full colors in both reflection and transmission. Based on the proposed polarization-dependent structural color, the information encoding process is demonstrated for three multiplexed animal images and quick-responsive (QR) codes to verify the efficient information encoding and decoding of the proposed scheme. In the simulation, the animals can be seen under different polarization incidences, and the QR codes can be successfully decoded by the polarization rotation in transmission. The proposed bi-directional full-color generation metasurface has great potential in applications such as kaleidoscope generation, anti-counterfeiting, dynamic color display, and optical information encoding.

Enhancing metasurface fabricability through minimum feature size enforcement

The metasurfaces have shown great potential for miniaturizing conventional optics while offering extended flexibility. Recently, there has been considerable interest in using algorithms to generate meta-atom shapes for these metasurfaces, as they offer vast design freedom and not biased by the human intuition. However, these complex designs significantly increase the difficulty of fabrication. To address this, we introduce a design process that rigorously enforces the fabricability of both the material-filled (fill) and empty (void) regions in a metasurface design. This process takes into account specific constraints regarding the minimum feature size for each region. Additionally, it corrects any violations of these constraints across the entire device, ensuring only minimal impact on performance. Our method provides a practical way to create metasurface designs that are easy to fabricate, even with complex shapes, hence improving the overall production yield of these advanced meta-optical components.

Linear Electro-Optic Effect in 2D Ferroelectric for Electrically Tunable Metalens

The advent of 2D ferroelectrics, characterized by their spontaneous polarization states in layer-by-layer domains without the limitation of a finite size effect, brings enormous promise for applications in integrated optoelectronic devices. Comparing with semiconductor/insulator devices, ferroelectric devices show natural advantages such as non-volatility, low energy consumption and high response speed. Several 2D ferroelectric materials have been reported, however, the device implementation particularly for optoelectronic application remains largely hypothetical. Here, the linear electro-optic effect in 2D ferroelectrics is discovered and electrically tunable 2D ferroelectric metalens is demonstrated. The linear electric-field modulation of light is verified in 2D ferroelectric CuInP2S6. The in-plane phase retardation can be continuously tuned by a transverse DC electric field, yielding an effective electro-optic coefficient rc of 20.28 pm V-1. The CuInP2S6 crystal exhibits birefringence with the fast axis oriented along its (010) plane. The 2D ferroelectric Fresnel metalens shows efficacious focusing ability with an electrical modulation efficiency of the focusing exceeding 34%. The theoretical analysis uncovers the origin of the birefringence and unveil its ultralow light absorption across a wide wavelength range in this non-excitonic system. The van der Waals ferroelectrics enable room-temperature electrical modulation of light and offer the freedom of heterogeneous integration with silicon and another material system for highly compact and tunable photonics and metaoptics.

Temporal Dynamics of Collective Resonances in Periodic Metasurfaces

Temporal dynamics of confined optical fields can provide valuable insights into light-matter interactions in complex optical systems, going beyond their frequency-domain description. Here, we present a new experimental approach based on interferometric autocorrelation (IAC) that reveals the dynamics of optical near-fields enhanced by collective resonances in periodic metasurfaces. We focus on probing the resonances known as waveguide-plasmon polaritons, which are supported by plasmonic nanoparticle arrays coupled to a slab waveguide. To probe the resonant near-field enhancement, our IAC measurements make use of enhanced two-photon excited luminescence (TPEL) from semiconductor quantum dots deposited on the nanoparticle arrays. Thanks to the incoherent character of TPEL, the measurements are only sensitive to the fundamental optical fields and therefore can reveal clear signatures of their coherent temporal dynamics. In particular, we show that the excitation of a high-Q collective resonance gives rise to interference fringes at time delays as large as 500 fs, much greater than the incident pulse duration (150 fs). Based on these signatures, the basic characteristics of the resonances can be determined, including their Q factors, which are found to exceed 200. Furthermore, the measurements also reveal temporal beating between two different resonances, providing information on their frequencies and their relative contribution to the field enhancement. Finally, we present an approach to enhance the visibility of the resonances hidden in the IAC curves by converting them into spectrograms, which greatly facilitates the analysis and interpretation of the results. Our findings open up new perspectives on time-resolved studies of collective resonances in metasurfaces and other multiresonant systems.

Few-layer bifunctional metasurfaces enabling asymmetric and symmetric polarization-plane rotation at the subwavelength scale

We introduce and numerically validate the concept of few-layer bifunctional metasurfaces comprising two arrays of quasiplanar subwavelength resonators and a middle grid (array of rectangular holes) that offer both symmetric and asymmetric transmissions connected, respectively, with symmetric and asymmetric polarization-plane rotation functionalities. The proposed structures are thinner than λ / 7 and free of diffractions. Usually, the structure's symmetry or asymmetry, i.e. unbroken or broken spatial inversion symmetries, are considered for metasurfaces as prerequisites of the capability of symmetric or asymmetric conversion of linearly polarized waves, respectively. Due to the achieved adjustment of the resonances enabling the rotation of the polarization plane simultaneously for both orthogonal polarizations of the incident wave, the symmetric polarization-plane rotation functionality can be obtained within one subwavelength band, whereas the asymmetric polarization-plane rotation functionality associated with the asymmetric transmission is obtained within another subwavelength band. This combination of the functionalities in one subdiffraction structure is possible due to the optimal choice of the grid parameters, since they may strongly affect the coupling between the two resonator arrays. Although normal incidence is required for the targeted bifunctionality, the variations of the incidence angle can also be exploited for the enrichment of the overall functional capability. Variations of the polarization angle give another important degree of freedom. The connection between the polarization-angle dependence of cross-polarized transmission and capability of symmetric and asymmetric polarization-plane rotation functionalities is highlighted. The feasible designs of the bifunctional metasurfaces are discussed.

Transparent grating-based metamaterials for dynamic infrared radiative regulation smart windows

Dynamic infrared radiation regulation has been widely explored for smart windows because of its vital importance for comfortable and energy-efficient buildings. However, it remains a great challenge to synchronously achieve high visible transmittance and pronounced infrared tunability. Here, we propose a dynamic infrared tunable metamaterial composed of indium tin oxide (ITO) gratings, an air insulator, and an ITO reflector. The ITO grating-based infrared radiation regulator exhibits a high emissivity tunability of 0.73 at 8-13 μm while maintaining a high visible transmittance of 0.65 and 0.72 before and after actuation, respectively. By adjusting the geometric parameters, the tunable bandwidth can be further extended to 3-30 μm and the ultra-broadband tunability reaches 0.62. The excellent infrared tunable performance arises from the insulator thickness-dependent effect of Fabry-Pérot and propagating surface plasmon resonance coupling and decoupling, which lead to perfect and low absorption, respectively. This work provides potential for the advancement of smart window technology and makes a significant contribution to sustainable buildings.

Dynamic Hyperspectral Holography Enabled by Inverse-Designed Metasurfaces with Oblique Helicoidal Cholesterics

Metasurfaces are flat arrays of nanostructures that allow exquisite control of phase and amplitude of incident light. Although metasurfaces offer new active element for both fundamental science and applications, the challenge still remains to overcome their low information capacity and passive nature. Here, by integrating an inverse-designed-metasurface with oblique helicoidal cholesteric liquid crystal (ChOH), simultaneous spatial and spectral tunable metasurfaces with a high information capacity for dynamic hyperspectral holography, are demonstrated. The inverse design facilitates a single-phase map encoding of ten independent holographic images at different wavelengths. ChOH provides precise spectral modulation with narrow bandwidth and wide tunable regime in response to programmed stimuli, thus enabling dynamic switching of the multicolor holography. The results provide simple and generalizable principles for the rational design of interactive metasurfaces that will find numerous applications, including security platform.

Beyond the lab: a nanoimprint metalens array-based augmented reality

A see-through augmented reality prototype has been developed based on an ultrathin nanoimprint metalens array, opening up a full-colour, video-rate, and low-cost 3D near-eye display.

Multifunctional integrated metamaterials for radar-infrared-visible compatible multispectral stealth

Metamaterials offer exciting opportunities for developing multispectral stealth due to their unique electromagnetic properties. However, currently transparent radar-infrared-visible compatible stealth metamaterials typically involve complex hierarchical designs, leading to thickness and transparency limitations. Here, we propose an integrated metamaterial for multispectral stealth with high transparency. Our design features an ITO/dielectric/ITO sandwich structure, with the upper-layer ITO acting as a resonator for broadband microwave absorption while maintaining a high filling ratio to suppress infrared (IR) radiation. Experimental results demonstrate excellent performance, with over 90% microwave absorption in 8-18 GHz, an IR emissivity of approximately 0.36 in 3-14 µm, an average optical transmittance of 74.1% in 380-800 nm, and a thickness of only 2.4 mm. With its multispectral compatibility, the proposed metamaterial has potential applications in stealth and camouflage fields.

Dynamic Optical Encryption Fueled via Tunable Mechanical Composite Micrograting Systems

Optical grating devices based on micro/nanostructured functional surfaces are widely employed to precisely manipulate light propagation, which is significant for information technologies, optical data storage, and light sensors. However, the parameters of rigid periodic structures are difficult to tune after manufacturing, which seriously limits their capacity for in situ light manipulation. Here, a novel anti-eavesdropping, anti-damage, and anti-tamper dynamic optical encryption strategy are reported via tunable mechanical composite wrinkle micrograting encryption systems (MCWGES). By mechanically composing multiple in-situ tunable ordered wrinkle gratings, the dynamic keys with large space capacity are generated to obtain encrypted diffraction patterns, which can provide a higher level of security for the encrypted systems. Furthermore, a multiple grating cone diffraction model is proposed to reveal the dynamic optical encryption principle of MCWGES. Optical encryption communication using dynamic keys has the effect of preventing eavesdropping, damage, and tampering. This dynamic encryption method based on optical manipulation of wrinkle grating demonstrates the potential applications of micro/nanostructured functional surfaces in the field of information security.

Solar energy broadband capturing by metamaterial absorber based on titanium metal

In recent years, the exploration of solar absorbers has grown in favor due to the scarcity of energy. Here, we propose an absorber with an array of a circular ring surrounding disk (RSD) for solar energy capture. The novel structure keeps above 93.5% absorption with an average absorption of 96.95% in wavelengths from 300 to 4000 nm. Meanwhile, the proposed absorber is advantageous in that the structure is generalizable to other metals and dielectric materials. Furthermore, the data results show that the absorber has polarization-independent properties as well as maintaining >90% absorption in the considered wavelength range up to an incidence angle of 52° and >95% absorption at large process tolerances. Finally, the excellent absorption under the AM1.5 solar spectrum demonstrates the RSD absorber's ability to capture solar energy. These results show the potential of the absorber for applications in electromagnetic invisibility cloaking, thermal emitters, and solar energy capture and conversion.

High Q lithium niobate metasurfaces with transparent electrodes for efficient amplitude and phase modulation

Lithium niobate (LN)-based metasurfaces have demonstrated remarkable potential in integrated electro-optically adjustable metadevices with the maturation of thin film LN on insulator (LNOI) technology. Here, we proposed a type of high Q factor tunable metasurface with etchless LN, which is electrically driven in the vertical direction by using transparent conductive film. A transmission amplitude modulation of over 60 dB at a voltage of 20 V is realized through guided mode resonances created at the LN layer with a Q factor of 1320. Meanwhile, phase modulation is also realized with a reflective design by adding a gold layer at the bottom of the metasurface. With a gate voltage of 80 V, about 1.75π phase modulation is achieved while keeping reflection over 92%. Our proposed device achieves effective modulation of optical amplitude and phase in the near-infrared band, which lays a good foundation for the development of high performance LN-based active nanophotonic devices.

Observation of spatiotemporal optical vortices enabled by symmetry-breaking slanted nanograting

Providing additional degrees of freedom to manipulate light, spatiotemporal optical vortex (STOV) beams carrying transverse orbital angular momentum are of fundamental importance for spatiotemporal control of light-matter interactions. Unfortunately, existing methods to generate STOV are plagued by various limitations such as inefficiency, bulkiness, and complexity. Here, we theoretically propose and experimentally demonstrate a microscale singlet platform composed of a slanted nanograting to generate STOV. Leveraging the intrinsic topological singularity induced by C2 symmetry and z-mirror symmetry breaking of the slanted nanograting, STOV is generated through the Fourier transform of the spiral phase in the momentum-frequency space to the spatiotemporal domain. In experiments, we observe the space-time evolution of STOV carried by femtosecond pulses using a time-resolved interferometry technique and achieve a generation efficiency exceeding 40%. Our work sheds light on a compact and versatile platform for light pulse shaping, and paves the way towards a fully integrated system for spatiotemporal light manipulation.

Eigendecomposition-free inverse design of meta-optics devices

The inverse design of meta-optics has received much attention in recent years. In this paper, we propose a GPU-friendly inverse design framework based on improved eigendecomposition-free rigorous diffraction interface theory, which offers up to 16.2 × speedup over the traditional inverse design based on rigorous coupled-wave analysis. We further improve the framework's flexibility by introducing a hybrid parameterization combining neural-implicit and traditional shape optimization. We demonstrate the effectiveness of our framework through intricate tasks, including the inverse design of reconfigurable free-form meta-atoms.

Sub-1-Volt Electrically Programmable Optical Modulator Based on Active Tamm Plasmon

Reconfigurable optical devices hold great promise for advancing high-density optical interconnects, photonic switching, and memory applications. While many optical modulators based on active materials have been demonstrated, it is challenging to achieve a high modulation depth with a low operation voltage in the near-infrared (NIR) range, which is a highly sought-after wavelength window for free-space communication and imaging applications. Here, electrically switchable Tamm plasmon coupled with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is introduced. The device allows for a high modulation depth across the entire NIR range by fully absorbing incident light even under epsilon near zero conditions. Optical modulation exceeding 88% is achieved using a CMOS-compatible voltage of ±1 V. This modulation is facilitated by precise electrical control of the charge carrier density through an electrochemical doping/dedoping process. Additionally, the potential applications of the device are extended for a non-volatile multi-memory state optical device, capable of rewritable optical memory storage and exhibiting long-term potentiation/depression properties with neuromorphic behavior.

Tunable Microwave Absorbing Devices Enabled by Reversible Metal Electrodeposition

Tunable microwave absorbers have gained significant interest due to their capability to actively control microwaves. However, the existing architecture-change-based approach lacks flexibility, and the active-element-based approach is constrained by a narrowband operation or small dynamic modulation range. Here, a novel electrically tunable microwave absorbing device (TMAD) is demonstrated that can achieve dynamic tuning of the average reflection amplitude between -13.0 and -1.2 dB over a broadband range of 8-18 GHz enabled by reversible metal electrodeposition. This reversible tunability is achieved by electrodepositing silver (Ag) layers with controlled morphology on nanoscopic platinum (Pt) films in a device structure similar to a tunable Salisbury screen, employing Ag electrodeposited on Pt films as the modifiable resistive layer. Furthermore, this TMAD possesses a simple device architecture, excellent bistability, and multispectral compatibility. Our approach offers a new strategy for dynamically manipulating microwaves, which has potential utility in intelligent camouflage and communication systems.

All-optical free-space routing of upconverted light by metasurfaces via nonlinear interferometry

All-optical modulation yields the promise of high-speed information processing. In this field, metasurfaces are rapidly gaining traction as ultrathin multifunctional platforms for light management. Among the featured functionalities, they enable light-wavefront manipulation and more recently demonstrated the ability to perform light-by-light manipulation through nonlinear optical processes. Here, by employing a nonlinear periodic metasurface, we demonstrate the all-optical routing of telecom photons upconverted to the visible range. This is achieved via the interference between two frequency-degenerate upconversion processes, namely, third-harmonic and sum-frequency generation, stemming from the interaction of a pump pulse with its frequency-doubled replica. By tuning the relative phase and polarization between these two pump beams, we route the upconverted signal among the diffraction orders of the metasurface with a modulation efficiency of up to 90%. This can be achieved by concurrently engineering the nonlinear emission of the individual elements (meta-atoms) of the metasurface along with its pitch. Owing to the phase control and ultrafast dynamics of the underlying nonlinear processes, free-space all-optical routing could be potentially performed at rates close to the employed optical frequencies divided by the quality factor of the optical resonances at play. Our approach adds a further twist to optical interferometry, which is a key enabling technique employed in a wide range of applications, such as homodyne detection, radar interferometry, light detection and ranging technology, gravitational-wave detection and molecular photometry. In particular, the nonlinear character of light upconversion combined with phase sensitivity is extremely appealing for enhanced imaging and biosensing.

Vision-driven metasurfaces for perception enhancement

Metasurfaces have exhibited unprecedented degree of freedom in manipulating electromagnetic (EM) waves and thus provide fantastic front-end interfaces for smart systems. Here we show a framework for perception enhancement based on vision-driven metasurface. Human's eye movements are matched with microwave radiations to extend the humans' perception spectrum. By this means, our eyes can "sense" visual information and invisible microwave information. Several experimental demonstrations are given for specific implementations, including a physiological-signal-monitoring system, an "X-ray-glasses" system, a "glimpse-and-forget" tracking system and a speech reception system for deaf people. Both the simulation and experiment results verify evident advantages in perception enhancement effects and improving information acquisition efficiency. This framework can be readily integrated into healthcare systems to monitor physiological signals and to offer assistance for people with disabilities. This work provides an alternative framework for perception enhancement and may find wide applications in healthcare, wearable devices, search-and-rescue and others.

Diffractive optical computing in free space

Structured optical materials create new computing paradigms using photons, with transformative impact on various fields, including machine learning, computer vision, imaging, telecommunications, and sensing. This Perspective sheds light on the potential of free-space optical systems based on engineered surfaces for advancing optical computing. Manipulating light in unprecedented ways, emerging structured surfaces enable all-optical implementation of various mathematical functions and machine learning tasks. Diffractive networks, in particular, bring deep-learning principles into the design and operation of free-space optical systems to create new functionalities. Metasurfaces consisting of deeply subwavelength units are achieving exotic optical responses that provide independent control over different properties of light and can bring major advances in computational throughput and data-transfer bandwidth of free-space optical processors. Unlike integrated photonics-based optoelectronic systems that demand preprocessed inputs, free-space optical processors have direct access to all the optical degrees of freedom that carry information about an input scene/object without needing digital recovery or preprocessing of information. To realize the full potential of free-space optical computing architectures, diffractive surfaces and metasurfaces need to advance symbiotically and co-evolve in their designs, 3D fabrication/integration, cascadability, and computing accuracy to serve the needs of next-generation machine vision, computational imaging, mathematical computing, and telecommunication technologies.

Linear and phase controllable terahertz frequency conversion via ultrafast breaking the bond of a meta-molecule

The metasurface platform with time-varying characteristics has emerged as a promising avenue for exploring exotic physics associated with Floquet materials and for designing photonic devices like linear frequency converters. However, the limited availability of materials with ultrafast responses hinders their applications in the terahertz range. Here we present a time-varying metasurface comprising an array of superconductor-metal hybrid meta-molecules. Each meta-molecule consists of two meta-atoms that are "bonded" together by double superconducting microbridges. Through experimental investigations, we demonstrate high-efficiency linear terahertz frequency conversion by rapidly breaking the bond using a coherent ultrashort terahertz pump pulse. The frequency and relative phase of the converted wave exhibit strong dependence on the pump-probe delay, indicating phase controllable wave conversion. The dynamics of the meta-molecules during the frequency conversion process are comprehensively understood using a time-varying coupled mode model. This research not only opens up new possibilities for developing innovative terahertz sources but also provides opportunities for exploring topological dynamics and Floquet physics within metasurfaces.

Electrically tunable topological phase transition in non-Hermitian optical MEMS metasurfaces

Exceptional points (EPs), unique junctures in non-Hermitian open systems where eigenvalues and eigenstates simultaneously coalesce, have gained notable attention in photonics because of their enthralling physical principles and unique properties. Nonetheless, the experimental observation of EPs, particularly within the optical domain, has proven rather challenging because of the grueling demand for precise and comprehensive control over the parameter space, further compounded by the necessity for dynamic tunability. Here, we demonstrate the occurrence of optical EPs when operating with an electrically tunable non-Hermitian metasurface platform that synergizes chiral metasurfaces with piezoelectric MEMS mirrors. Moreover, we show that, with a carefully constructed metasurface, a voltage-controlled spectral space can be finely tuned to access not only the chiral EP but also the diabolic point characterized by degenerate eigenvalues and orthogonal eigenstates, thereby allowing for dynamic topological phase transition. Our work paves the way for developing cutting-edge optical devices rooted in EP physics and opening uncharted vistas in dynamic topological photonics.

Switchable unidirectional emissions from hydrogel gratings with integrated carbon quantum dots

Directional emission of photoluminescence despite its incoherence is an attractive technique for light-emitting fields and nanophotonics. Optical metasurfaces provide a promising route for wavefront engineering at the subwavelength scale, enabling the feasibility of unidirectional emission. However, current directional emission strategies are mostly based on static metasurfaces, and it remains a challenge to achieve unidirectional emissions tuning with high performance. Here, we demonstrate quantum dots-hydrogel integrated gratings for actively switchable unidirectional emission with simultaneously a narrow divergence angle less than 1.5° and a large diffraction angle greater than 45°. We further demonstrate that the grating efficiency alteration leads to a more than 7-fold tuning of emission intensity at diffraction order due to the variation of hydrogel morphology subject to change in ambient humidity. Our proposed switchable emission strategy can promote technologies of active light-emitting devices for radiation control and optical imaging.

Dynamical control of nanoscale light-matter interactions in low-dimensional quantum materials

Tip-enhanced nano-spectroscopy and -imaging have significantly advanced our understanding of low-dimensional quantum materials and their interactions with light, providing a rich insight into the underlying physics at their natural length scale. Recently, various functionalities of the plasmonic tip expand the capabilities of the nanoscopy, enabling dynamic manipulation of light-matter interactions at the nanoscale. In this review, we focus on a new paradigm of the nanoscopy, shifting from the conventional role of imaging and spectroscopy to the dynamical control approach of the tip-induced light-matter interactions. We present three different approaches of tip-induced control of light-matter interactions, such as cavity-gap control, pressure control, and near-field polarization control. Specifically, we discuss the nanoscale modifications of radiative emissions for various emitters from weak to strong coupling regime, achieved by the precise engineering of the cavity-gap. Furthermore, we introduce recent works on light-matter interactions controlled by tip-pressure and near-field polarization, especially tunability of the bandgap, crystal structure, photoluminescence quantum yield, exciton density, and energy transfer in a wide range of quantum materials. We envision that this comprehensive review not only contributes to a deeper understanding of the physics of nanoscale light-matter interactions but also offers a valuable resource to nanophotonics, plasmonics, and materials science for future technological advancements.

Manipulation of path state based on spatiotemporal dielectric metasurface

In this work, a spatiotemporal metasurface is proposed to manipulate the path of photons flexibly. The spatial modulation is induced by the rectangle silicon units aligned on silica in a manner with a phase gradient only for y-polarized photons, and the temporal modulation is contributed by the pumps of constructing Kerr dynamic gratings. By quantizing designed metasurfaces, the analytical solutions of output photon states can be derived correspondingly. Reversal design could be implemented by tailoring the profile of higher harmonics to infer the intensity of pumps, size of meta-atoms, and initial state. The path-polarization entanglement and correlations of output photons are realized, and then a CNOT gate is obtained by utilizing the deflection of the photon path. This work provides a scheme to deal with the spatiotemporal metasurfaces and expands the applications of metasurfaces in the quantum realm.

Designing Metasurfaces for Efficient Solar Energy Conversion

Metasurfaces have recently emerged as a promising technological platform, offering unprecedented control over light by structuring materials at the nanoscale using two-dimensional arrays of subwavelength nanoresonators. These metasurfaces possess exceptional optical properties, enabling a wide variety of applications in imaging, sensing, telecommunication, and energy-related fields. One significant advantage of metasurfaces lies in their ability to manipulate the optical spectrum by precisely engineering the geometry and material composition of the nanoresonators' array. Consequently, they hold tremendous potential for efficient solar light harvesting and conversion. In this Review, we delve into the current state-of-the-art in solar energy conversion devices based on metasurfaces. First, we provide an overview of the fundamental processes involved in solar energy conversion, alongside an introduction to the primary classes of metasurfaces, namely, plasmonic and dielectric metasurfaces. Subsequently, we explore the numerical tools used that guide the design of metasurfaces, focusing particularly on inverse design methods that facilitate an optimized optical response. To showcase the practical applications of metasurfaces, we present selected examples across various domains such as photovoltaics, photoelectrochemistry, photocatalysis, solar-thermal and photothermal routes, and radiative cooling. These examples highlight the ways in which metasurfaces can be leveraged to harness solar energy effectively. By tailoring the optical properties of metasurfaces, significant advancements can be expected in solar energy harvesting technologies, offering new practical solutions to support an emerging sustainable society.

Dielectric Metasurface Enabled Compact, Single-Shot Digital Holography for Quantitative Phase Imaging

Quantitative phase imaging (QPI) enables nondestructive, real-time, label-free imaging of transparent specimens and can reveal information about their fundamental properties such as cell size and morphology, mass density, particle dynamics, and cellular fluctuations. Development of high-performance and low-cost quantitative phase imaging systems is thus required in many fields, including on-site biomedical imaging and industrial inspection. Here, we propose an ultracompact, highly stable interferometer based on a single-layer dielectric metasurface for common path off-axis digital holography and experimentally demonstrate quantitative phase imaging. The interferometric imaging system leveraging an ultrathin multifunctional metasurface captures image plane holograms in a single shot and provides quantitative phase information on the test samples for extraction of its physical properties. With the benefits of planar engineering and high integrability, the proposed metasurface-based method establishes a stable miniaturized QPI system for reliable and cost-effective point-of-care devices, live cell imaging, 3D topography, and edge detection for optical computing.

Hybrid silicon-organic Huygens' metasurface for phase modulation

Spatial light modulators have desirable applications in sensing and free space communication because they create an interface between the optical and electronic realms. Electro-optic modulators allow for high-speed intensity manipulation of an electromagnetic wavefront. However, most surfaces of this sort pose limitations due to their ability to modulate intensity rather than phase. Here we investigate an electro-optic modulator formed from a silicon-organic Huygens' metasurface. In a simulation-based study, we discover a metasurface design immersed in high-performance electro-optic molecules that can achieve near-full resonant transmission with phase coverage over the full 2π range. Through the electro-optic effect, we show 140 ∘ (0.79π) modulation over a range of -100 to 100 V at 1330 nm while maintaining near-constant transmitted field intensity (between 0.66 and 0.8). These results potentiate the fabrication of a high-speed spatial light modulator with the resolved parameters.

Precisely constructing hybrid nanogap arrays via wet-transfer of dielectric metasurfaces onto a plasmonic mirror

We propose a new method for fabricating hybrid metasurfaces by combining Mie and plasmonic resonances. Our approach involves obtaining an ultrasmooth gold film and separately structuring monocrystalline silicon (c-Si) nanoantenna arrays, which are then wet-transferred and finally immobilized onto the gold film. The experimental and simulation analysis reveals the importance of the native oxide layer of Si and demonstrates fascinating dispersion curves with nanogap resonances and bound states in the continuum. The localized field enhancements in the nanogap cavities result from the coupling between multipolar Mie resonances and their mirror images in the gold film. This effective method improves our understanding of hybrid modes and offers opportunities for developing active metasurfaces, such as depositing c-Si nanoantenna arrays onto stretchable polydimethylsiloxane substrates or electro-optic and piezoelectric sensitive lithium niobate films for potential applications in MEMS, LiDAR, and beyond.

Manipulations of multi-frequency waves and signals via multi-partition asynchronous space-time-coding digital metasurface

Manipulations of multiple carrier frequencies are especially important in a variety of fields like radar detection and wireless communications. In conventional radio-frequency architecture, the multi-frequency control is implemented by microwave circuits, which are hard to integrate with antenna apertures, thus bringing the problems of expensive system and high power consumption. Previous studies demonstrate the possibility to jointly control the multiple harmonics using space-time-coding digital metasurface, but suffer from the drawback of inherent harmonic entanglement. To overcome the difficulties, we propose a multi-partition asynchronous space-time-coding digital metasurface (ASTCM) to generate and manipulate multiple frequencies with more flexibility. We further establish an ASTCM-based transmitter to realize wireless communications with frequency-division multiplexing, where the metasurface is responsible for carrier-wave generations and signal modulations. The direct multi-frequency controls with ASTCM provides a new avenue to simplify the traditional wireless systems with reduced costs and low power consumption.

Hierarchically Doped Plasmonic Nanocrystal Metamaterials

Assembling plasmonic nanocrystals in regular superlattices can produce effective optical properties not found in homogeneous materials. However, the range of these metamaterial properties is limited when a single nanocrystal composition is selected for the constituent meta-atoms. Here, we show how continuously varying doping at two length scales, the atomic and nanocrystal scales, enables tuning of both the frequency and bandwidth of the collective plasmon resonance in nanocrystal-based metasurfaces, while these features are inextricably linked in single-component superlattices. Varying the mixing ratio of indium tin oxide nanocrystals with different dopant concentrations, we use large-scale simulations to predict the emergence of a broad infrared spectral region with near-zero permittivity. Experimentally, tunable reflectance and absorption bands are observed, owing to in- and out-of-plane collective resonances. These spectral features and the predicted strong near-field enhancement establish this multiscale doping strategy as a powerful new approach to designing metamaterials for optical applications.

Electrically and all-optically switchable nonlocal nonlinear metasurfaces

Nonlocal effects on metasurfaces play an important role to achieve high-Q spectral selectivity, beneficial for development of multifunctional, multispectral integrated optics. In addition, they enhance the optical interaction and promote a variety of nonlinear effects, including frequency conversion and stimulated scattering. Active tuning of nonlocal nonlinearity is highly desirable for sensing and signal processing but was hardly explored until now. Here, we show drastic electric and all-optical tunability of nonlocal second-harmonic generation (SHG) from nonlinear metasurface, functionalized with a twisted nematic liquid-crystal (LC) layer. The addition of LC results in the emergence of strong nonlocal SHG, due to a surface lattice resonance of the system. We demonstrate a notable enhancement of SHG on resonance, more than 25 dB electrical switching amplitude, and all-optically induced phase transition imprinted on SHG. Our results on dynamic nonlocal effects introduce a very promising route for active nonlinear optical metadevices at the nanoscale.

Low-Loss Plasmonics with Nanostructured Potassium and Sodium-Potassium Liquid Alloys

Alkali metals have low optical losses in the visible to near-infrared (NIR) compared with noble metals. However, their high reactivity prohibits the exploration of their optical properties. Recently sodium (Na) has been experimentally demonstrated as a low-loss plasmonic material. Here we report on a thermo-assisted nanoscale embossing (TANE) technique for fabricating plasmonic nanostructures from pure potassium (K) and NaK liquid alloys. We show high-quality-factor resonances from K as narrow as 15 nm in the NIR, which we attribute to the high material quality and low optical loss. We further demonstrate liquid Na-K plasmonics by exploiting the Na-K eutectic phase diagram. Our study expands the material library for alkali metal plasmonics and liquid plasmonics, potentially enabling a range of new material platforms for active metamaterials and photonic devices.

Programmable Wavefront Control in the Visible Spectrum Using Low-Loss Chalcogenide Phase-Change Metasurfaces

All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change materials (PCMs), which provide fast, low energy, and non-volatile means to endow metasurfaces with a switching mechanism. In this regard, great advancements have been done in the mid-infrared and near-infrared spectrum using different chalcogenides. In the visible spectral range, however, very few devices have demonstrated full phase manipulation, high efficiencies, and reversible optical modulation. In this work, a programmable all-dielectric Huygens' metasurface made of antimony sulfide (Sb2 S3 ) PCM is experimentally demonstrated, a low loss and high-index material in the visible spectral range with a large contrast (≈0.5) between its amorphous and crystalline states. ≈2π phase modulation is shown with high associated transmittance and it is used to create programmable beam-steering devices. These novel chalcogenide PCM metasurfaces have the potential to emerge as a platform for next-generation spatial light modulators and to impact application areas such as programmable and adaptive flat optics, light detection and ranging (LiDAR), and many more.

Nonreciprocal topological mode conversion by encircling an exceptional point in dynamic waveguides

The topology of exceptional points (EPs) has been revealed by taking stationary or dynamical encircling around them, which induces eigenstate exchange or chiral mode conversion. However, the conversions are usually reciprocal obeying restricted transmittances. Here we propose the concept of nonreciprocal encircling of EPs in a dynamic waveguide under complex modulation. The waveguide allows direction-dependent EPs in their quasienergy spectra due to different phase-matching conditions for opposite propagation direction. We design a closed loop that will encircle the EP in the backward direction but not in the forward direction. In this way, a nonreciprocal topological conversion is achieved as the forward transmittance from the even to odd mode significantly exceeds the backward transmittance from the odd to even mode. As a result, the forward propagation produces two modes with equal strength while the backward propagation leads to a specific mode regardless of the input. The structure is promising for making robust optical isolators.