Ultrafast optical pulse shaping using dielectric metasurfaces

Silicon photonic microresonator-based high-resolution line-by-line pulse shaping

Optical pulse shaping stands as a formidable technique in ultrafast optics, radio-frequency photonics, and quantum communications. While existing systems rely on bulk optics or integrated platforms with planar waveguide sections for spatial dispersion, they face limitations in achieving finer (few- or sub-GHz) spectrum control. These methods either demand considerable space or suffer from pronounced phase errors and optical losses when assembled to achieve fine resolution. Addressing these challenges, we present a foundry-fabricated six-channel silicon photonic shaper using microresonator filter banks with inline phase control and high spectral resolution. Leveraging existing comb-based spectroscopic techniques, we devise a system to mitigate thermal crosstalk and enable the versatile use of our on-chip shaper. Our results demonstrate the shaper's ability to phase-compensate six comb lines at tunable channel spacings of 3, 4, and 5 GHz. Specifically, at a 3 GHz channel spacing, we showcase the generation of arbitrary waveforms in the time domain. This scalable design and control scheme holds promise in meeting future demands for high-precision spectral shaping capabilities.

Observation of spatiotemporal optical vortices enabled by symmetry-breaking slanted nanograting

Providing additional degrees of freedom to manipulate light, spatiotemporal optical vortex (STOV) beams carrying transverse orbital angular momentum are of fundamental importance for spatiotemporal control of light-matter interactions. Unfortunately, existing methods to generate STOV are plagued by various limitations such as inefficiency, bulkiness, and complexity. Here, we theoretically propose and experimentally demonstrate a microscale singlet platform composed of a slanted nanograting to generate STOV. Leveraging the intrinsic topological singularity induced by C2 symmetry and z-mirror symmetry breaking of the slanted nanograting, STOV is generated through the Fourier transform of the spiral phase in the momentum-frequency space to the spatiotemporal domain. In experiments, we observe the space-time evolution of STOV carried by femtosecond pulses using a time-resolved interferometry technique and achieve a generation efficiency exceeding 40%. Our work sheds light on a compact and versatile platform for light pulse shaping, and paves the way towards a fully integrated system for spatiotemporal light manipulation.

Diffractive optical computing in free space

Structured optical materials create new computing paradigms using photons, with transformative impact on various fields, including machine learning, computer vision, imaging, telecommunications, and sensing. This Perspective sheds light on the potential of free-space optical systems based on engineered surfaces for advancing optical computing. Manipulating light in unprecedented ways, emerging structured surfaces enable all-optical implementation of various mathematical functions and machine learning tasks. Diffractive networks, in particular, bring deep-learning principles into the design and operation of free-space optical systems to create new functionalities. Metasurfaces consisting of deeply subwavelength units are achieving exotic optical responses that provide independent control over different properties of light and can bring major advances in computational throughput and data-transfer bandwidth of free-space optical processors. Unlike integrated photonics-based optoelectronic systems that demand preprocessed inputs, free-space optical processors have direct access to all the optical degrees of freedom that carry information about an input scene/object without needing digital recovery or preprocessing of information. To realize the full potential of free-space optical computing architectures, diffractive surfaces and metasurfaces need to advance symbiotically and co-evolve in their designs, 3D fabrication/integration, cascadability, and computing accuracy to serve the needs of next-generation machine vision, computational imaging, mathematical computing, and telecommunication technologies.

Three-Dimensional Reconfigurable Optical Singularities in Bilayer Photonic Crystals

Metasurfaces and photonic crystals have revolutionized classical and quantum manipulation of light and opened the door to studying various optical singularities related to phases and polarization states. However, traditional nanophotonic devices lack reconfigurability, hindering the dynamic switching and optimization of optical singularities. This paper delves into the underexplored concept of tunable bilayer photonic crystals (BPhCs), which offer rich interlayer coupling effects. Utilizing silicon nitride-based BPhCs, we demonstrate tunable bidirectional and unidirectional polarization singularities, along with spatiotemporal phase singularities. Leveraging these tunable singularities, we achieve dynamic modulation of bound-state-in-continuum states, unidirectional guided resonances, and both longitudinal and transverse orbital angular momentum. Our work paves the way for multidimensional control over polarization and phase, inspiring new directions in ultrafast optics, optoelectronics, and quantum optics.

All-Glass 100 mm Diameter Visible Metalens for Imaging the Cosmos

Metasurfaces, optics made from subwavelength-scale nanostructures, have been limited to millimeter-sizes by the scaling challenge of producing vast numbers of precisely engineered elements over a large area. In this study, we demonstrate an all-glass 100 mm diameter metasurface lens (metalens) comprising 18.7 billion nanostructures that operates in the visible spectrum with a fast f-number (f/1.5, NA = 0.32) using deep-ultraviolet (DUV) projection lithography. Our work overcomes the exposure area constraints of lithography tools and demonstrates that large metasurfaces are commercially feasible. Additionally, we investigate the impact of various fabrication errors on the imaging quality of the metalens, several of which are specific to such large area metasurfaces. We demonstrate direct astronomical imaging of the Sun, the Moon, and emission nebulae at visible wavelengths and validate the robustness of such metasurfaces under extreme environmental thermal swings for space applications.

Tantalum pentoxide: a new material platform for high-performance dielectric metasurface optics in the ultraviolet and visible region

Dielectric metasurfaces, composed of planar arrays of subwavelength dielectric structures that collectively mimic the operation of conventional bulk optical elements, have revolutionized the field of optics by their potential in constructing high-efficiency and multi-functional optoelectronic systems on chip. The performance of a dielectric metasurface is largely determined by its constituent material, which is highly desired to have a high refractive index, low optical loss and wide bandgap, and at the same time, be fabrication friendly. Here, we present a new material platform based on tantalum pentoxide (Ta2O5) for implementing high-performance dielectric metasurface optics over the ultraviolet and visible spectral region. This wide-bandgap dielectric, exhibiting a high refractive index exceeding 2.1 and negligible extinction coefficient across a broad spectrum, can be easily deposited over large areas with good quality using straightforward physical vapor deposition, and patterned into high-aspect-ratio subwavelength nanostructures through commonly-available fluorine-gas-based reactive ion etching. We implement a series of high-efficiency ultraviolet and visible metasurfaces with representative light-field modulation functionalities including polarization-independent high-numerical-aperture lensing, spin-selective hologram projection, and vivid structural color generation, and the devices exhibit operational efficiencies up to 80%. Our work overcomes limitations faced by scalability of commonly-employed metasurface dielectrics and their operation into the visible and ultraviolet spectral range, and provides a novel route towards realization of high-performance, robust and foundry-manufacturable metasurface optics.

Dielectric Metasurface Enabled Compact, Single-Shot Digital Holography for Quantitative Phase Imaging

Quantitative phase imaging (QPI) enables nondestructive, real-time, label-free imaging of transparent specimens and can reveal information about their fundamental properties such as cell size and morphology, mass density, particle dynamics, and cellular fluctuations. Development of high-performance and low-cost quantitative phase imaging systems is thus required in many fields, including on-site biomedical imaging and industrial inspection. Here, we propose an ultracompact, highly stable interferometer based on a single-layer dielectric metasurface for common path off-axis digital holography and experimentally demonstrate quantitative phase imaging. The interferometric imaging system leveraging an ultrathin multifunctional metasurface captures image plane holograms in a single shot and provides quantitative phase information on the test samples for extraction of its physical properties. With the benefits of planar engineering and high integrability, the proposed metasurface-based method establishes a stable miniaturized QPI system for reliable and cost-effective point-of-care devices, live cell imaging, 3D topography, and edge detection for optical computing.

Light People: Professor Cheng Zhang

EDITORIAL

Nanophotonics has emerged as a cutting-edge interdisciplinary research field today. Its primary objective is to leverage the interaction between light and matter at the wavelength and sub-wavelength scales, with the purpose of designing and manufacturing miniaturized, multifunctional, and high-performance optical devices and systems. Professor Cheng Zhang from Huazhong University of Science and Technology has dedicated his career to nanophotonic device research. His work encompasses a wide range of areas, including plasmonic devices, optical metamaterials, and metasurfaces. Through the design of innovative artificial electromagnetic structures and the exploration of emerging nanofabrication techniques, Professor Cheng Zhang has effectively achieved versatile control over various properties of electromagnetic waves, including amplitude, phase, and polarization states. Furthermore, his research extends to the continuous exploration of novel optical phenomena, aimed at realizing high-performance engineering applications. In this edition of Light People, we will take you deep into the world of Professor Cheng Zhang, a young scientist exemplifying the spirit of innovation, relentless improvement, and unwavering pursuit of excellence. You will discover how he has overcome numerous challenges in the realm of nanophotonic research.

Nonlocality-Enabled Pulse Management in Epsilon-Near-Zero Metamaterials

Ultrashort optical pulses are integral to probing various physical, chemical, and biological phenomena and feature in a whole host of applications, not least in data communications. Super- and subluminal pulse propagation and dispersion management (DM) are two of the greatest challenges in producing or counteracting modifications of ultrashort optical pulses when precise control over pulse characteristics is required. Progress in modern photonics toward integrated solutions and applications has intensified this need for greater control of ultrafast pulses in nanoscale dimensions. Metamaterials, with their unique ability to provide designed optical properties, offer a new avenue for temporal pulse engineering. Here an epsilon-near-zero metamaterial is employed, exhibiting strong nonlocal (spatial dispersion) effects, to temporally shape optical pulses. The authors experimentally demonstrate, over a wide bandwidth of tens of THz, the ability to switch from sub to superluminal and further to "backward" pulse propagation (±c/20) in the same metamaterial device by simply controlling the angle of illumination. Both the amplitude and phase of a 10 ps pulse can be controlled through DM in this subwavelength device. Shaping ultrashort optical pulses with metamaterials promises to be advantageous in laser physics, optical communications, imaging, and spectroscopy applications using both integrated and free-standing devices.

Dispersion-engineered metasurfaces reaching broadband 90% relative diffraction efficiency

Dispersion results from the variation of index of refraction as well as electric field confinement in sub-wavelength structures. It usually results in efficiency decrease in metasurface components leading to troublesome scattering into unwanted directions. In this letter, by dispersion engineering, we report a set of eight nanostructures whose dispersion properties are nearly identical to each other while being capable of providing 0 to 2π full-phase coverage. Our nanostructure set enables broadband and polarization-insensitive metasurface components reaching 90% relative diffraction efficiency (normalized to the power of transmitted light) from 450 nm to 700 nm in wavelength. Relative diffraction efficiency is important at a system level - in addition to diffraction efficiency (normalized to the power of incident light) - as it considers only the transmitted optical power that can affect the signal to noise ratio. We first illustrate our design principle by a chromatic dispersion-engineered metasurface grating, then show that other metasurface components such as chromatic metalenses can also be implemented by the same set of nanostructures with significantly improved relative diffraction efficiency.

Compact Metasurface-Based Optical Pulse-Shaping Device

Dispersion is present in every optical setup and is often an undesired effect, especially in nonlinear-optical experiments where ultrashort laser pulses are needed. Typically, bulky pulse compressors consisting of gratings or prisms are used to address this issue by precompensating the dispersion of the optical components. However, these devices are only able to compensate for a part of the dispersion (second-order dispersion). Here, we present a compact pulse-shaping device that uses plasmonic metasurfaces to apply an arbitrarily designed spectral phase delay allowing for a full dispersion control. Furthermore, with specific phase encodings, this device can be used to temporally reshape the incident laser pulses into more complex pulse forms such as a double pulse. We verify the performance of our device by using an SHG-FROG measurement setup together with a retrieval algorithm to extract the dispersion that our device applies to an incident laser pulse.

Tunable ultraviolet polarized light switch based on all-dielectric metasurfaces on a stretchable substrate

Most ultraviolet (UV) passive optics are currently non-tunable and lack external modulation methods because of the poor tunability of wide-bandgap semiconductor materials in UV working media. This study investigates the excitation of magnetic dipole resonances in the solar-blind UV region by hafnium oxide metasurfaces using elastic dielectric polydimethylsiloxane (PDMS). The near-field interactions between the resonant dielectric elements can be modulated by the mechanical strain of the PDMS substrate, which can flatten the structure's resonant peak beyond the solar-blind UV wavelength range, thereby turning on or off the optical switch in the solar-blind UV region. The device has a facile design and can be used in various applications, such as UV polarization modulation, optical communications, and spectroscopy.

High-speed optical pulse shaping based on programmable lithium niobate spatial light modulators

Pulse shaping plays a key role in various applications of ultrafast lasers, such as optical communications, laser micromachining, microscopy, and quantum coherent control. Conventional pulse shaping devices based on liquid crystal spatial light modulators (LCSLMs) or digital micromirror devices (DMDs) only have the shaping speed of several hertz to kilohertz, which is not suitable for applications requiring a high-speed response. Here, we demonstrate a high-speed programmable lithium niobate spatial light modulator (LNSLM) with 128 individual modulation channels and a modulation speed that can reach 1 MHz. Then we establish a high-speed LNSLM-based Fourier-transform (FT) pulse shaper to realize high-speed pulse shaping, and the update rate can reach 350 kHz, only limited by the electric circuit. The proposed high-speed pulse shaper scheme opens new avenues for future applications of ultrafast science, such as microscopic imaging, interaction between light and matter, and spectroscopy.

Radially and Azimuthally Pure Vortex Beams from Phase-Amplitude Metasurfaces

To exploit the full potential of the transverse spatial structure of light using the Laguerre-Gaussian basis, it is necessary to control the azimuthal and radial components of the photons. Vortex phase elements are commonly used to generate these modes of light, offering precise control over the azimuthal index but neglecting the radially dependent amplitude term, which defines their associated corresponding transverse profile. Here, we experimentally demonstrate the generation of high-purity Laguerre-Gaussian beams with a single-step on-axis transformation implemented with a dielectric phase-amplitude metasurface. By vectorially structuring the input beam and projecting it onto an orthogonal polarization basis, we can sculpt any vortex beam in phase and amplitude. We characterize the azimuthal and radial purities of the generated vortex beams, reaching a purity of 98% for a vortex beam with l =50 and p = 0. Furthermore, we comparatively show that the purity of the generated vortex beams outperforms those generated with other well-established phase-only metasurface approaches. In addition, we highlight the formation of "ghost" orbital angular momentum orders from azimuthal gratings (analogous to ghost orders in ruled gratings), which have not been widely studied to date. Our work brings higher-order vortex beams and their unlimited potential within reach of wide adoption.

Synthesizing ultrafast optical pulses with arbitrary spatiotemporal control

The ability to control the instantaneous state of light, from high-energy pulses down to the single-photon level, is an indispensable requirement in photonics. This has, for example, facilitated spatiotemporal probing and coherent control of ultrafast light-matter interactions, and enabled capabilities such as generation of exotic states of light with complexity, or at wavelengths, that are not easily accessible. Here, by leveraging the multifunctional control of light at the nanoscale offered by metasurfaces embedded in a Fourier transform setup, we present a versatile approach to synthesize ultrafast optical transients with arbitrary control over its complete spatiotemporal evolution. Our approach, supporting an ultrawide bandwidth with simultaneously high spectral and spatial resolution, enables ready synthesis of complex states of structured space-time wave packets. We expect our results to offer unique capabilities in coherent ultrafast light-matter interactions and facilitate applications in microscopy, communications, and nonlinear optics.

VarRCWA: An Adaptive High-Order Rigorous Coupled Wave Analysis Method

Semianalytical methods, such as rigorous coupled wave analysis, have been pivotal in the numerical analysis of photonic structures. In comparison to other numerical methods, they have a much lower computational cost, especially for structures with constant cross-sectional shapes (such as metasurface units). However, when the cross-sectional shape varies even mildly (such as a taper), existing semianalytical methods suffer from high computational costs. We show that the existing methods can be viewed as a zeroth-order approximation with respect to the structure's cross-sectional variation. We derive a high-order perturbative expansion with respect to the cross-sectional variation. Based on this expansion, we propose a new semianalytical method that is fast to compute even in the presence of large cross-sectional shape variation. Furthermore, we design an algorithm that automatically discretizes the structure in a way that achieves a user-specified accuracy level while at the same time reducing the computational cost.

Metasurface-driven full-space structured light for three-dimensional imaging

Structured light (SL)-based depth-sensing technology illuminates the objects with an array of dots, and backscattered light is monitored to extract three-dimensional information. Conventionally, diffractive optical elements have been used to form laser dot array, however, the field-of-view (FOV) and diffraction efficiency are limited due to their micron-scale pixel size. Here, we propose a metasurface-enhanced SL-based depth-sensing platform that scatters high-density ~10 K dot array over the 180° FOV by manipulating light at subwavelength-scale. As a proof-of-concept, we place face masks one on the beam axis and the other 50° apart from axis within distance of 1 m and estimate the depth information using a stereo matching algorithm. Furthermore, we demonstrate the replication of the metasurface using the nanoparticle-embedded-resin (nano-PER) imprinting method which enables high-throughput manufacturing of the metasurfaces on any arbitrary substrates. Such a full-space diffractive metasurface may afford ultra-compact depth perception platform for face recognition and automotive robot vision applications.

Compound Meta-Optics for Complete and Loss-Less Field Control

Optical metasurfaces offer a compact platform for manipulation of the amplitude, phase, and polarization state of light. Independent control over these properties, however, is hindered by the symmetric transmission matrix associated with single-layer metasurfaces. Here, we utilize multilayer birefringent meta-optics to realize high-efficiency, independent control over the amplitude, phase, and polarization state of light. High-efficiency control is enabled by redistributing the wavefront between cascaded metasurfaces, while end-to-end inverse design is used to realize independent complex-valued functions for orthogonal polarization states. Based on this platform, we demonstrate spatial mode division multiplexing, optical mode conversion, and universal vectorial holograms, all with diffraction efficiencies over 80%. This meta-optic platform expands the design space of flat optics and could lead to advances in optical communications, quantum entanglement, and information encryption.

Monolithic 3D phase profile formation in glass for spatial and temporal control of optical waves

Optical manufacturing technologies play a central role in modern science and engineering. Progress on both subtractive and additive fabrications is transforming the implementation of optical technologies. Despite the recent advances, modern fabrication still faces challenges in the accuracy, dimension, durability, intensity, and wavelength range. Here we present a direct monolithic 3D phase profile formation in glass and demonstrate its versatile applications for high-accuracy spatial and temporal control of optical waves in the extreme wavelength and intensity domains, direct fabrication of microlenses, and in situ aberration correction for refractive components. These advances and flexibilities will provide a new dimension for high-performance optical design and manufacture and enable novel applications in a broad range of disciplines.

Tunable structured light with flat optics

Flat optics has emerged as a key player in the area of structured light and its applications, owing to its subwavelength resolution, ease of integration, and compact footprint. Although its first generation has revolutionized conventional lenses and enabled anomalous refraction, new classes of meta-optics can now shape light and dark features of an optical field with an unprecedented level of complexity and multifunctionality. Here, we review these efforts with a focus on metasurfaces that use different properties of input light-angle of incidence and direction, polarization, phase distribution, wavelength, and nonlinear behavior-as optical knobs for tuning the output response. We discuss ongoing advances in this area as well as future challenges and prospects. These recent developments indicate that optically tunable flat optics is poised to advance adaptive camera systems, microscopes, holograms, and portable and wearable devices and may suggest new possibilities in optical communications and sensing.

A Quadri-Dimensional Manipulable Laser with an Intrinsic Chiral Photoswitch

Dynamic and multi-dimensional manipulation of laser emission with light allows for optical coding, computing, and imaging photonic chips. However, the coupling balance between photonic resonance and transmission is a formidable challenge due to the uncontrollable chiral microcavity with photo-reversibility, which is limited to the multi-freedom of the laser with sustainable and repeatable output beams. Herein, a helical superstructure system with a unique intrinsic chiral photoswitch is developed for resolving the always pendent problems on organized defects in the microcavity. The unique intrinsic chirality based on the photoswitchable system allows laser emission with a sharp and narrow band-width, with both remarkable thermodynamic stability and robust fatigue-resistance. A quadri-dimensional manipulable laser, featuring wavelength-tunability, wavefront-shaping, spin angular momentum (SAM), and orbital angular momentum (OAM), is successfully established with the assistance of the photoresponsive intrinsic chiral superstructure with photoreversibility. This technology marks an important milestone, and sketches a future framework for the realms of nanophotonic information encoding, security imprinting, and integrated photonics.

Metasurface-empowered spectral and spatial light modulation for disruptive holographic displays

The holographic display, one of the most realistic ways to reconstruct optical images in three-dimensional (3D) space, has gained a lot of attention as a next-generation display platform for providing deeper immersive experiences to users. So far, diffractive optical elements (DOEs) and spatial light modulators (SLMs) have been used to generate holographic images by modulating electromagnetic waves at each pixel. However, such architectures suffer from limitations in terms of having a resolution of only a few microns and the bulkiness of the entire optical system. In this review, we describe novel metasurfaces-based nanophotonic platforms that have shown exceptional control of electromagnetic waves at the subwavelength scale as promising candidates to overcome existing restrictions, while realizing flat optical devices. After introducing the fundamentals of metasurfaces in terms of spatial and spectral wavefront modulation, we present a variety of multiplexing approaches for high-capacity and full-color metaholograms exploiting the multiple properties of light as an information carrier. We then review tunable metaholograms using active materials modulated by several external stimuli. Afterward, we discuss the integration of metasurfaces with other optical elements required for future 3D display platforms in augmented/virtual reality (AR/VR) displays such as lenses, beam splitters, diffusers, and eye-tracking sensors. Finally, we address the challenges of conventional nanofabrication methods and introduce scalable preparation techniques that can be applied to metasurface-based nanophotonic technologies towards commercially and ergonomically viable future holographic displays.

Active optical metasurfaces: comprehensive review on physics, mechanisms, and prospective applications

Optical metasurfaces with subwavelength thickness hold considerable promise for future advances in fundamental optics and novel optical applications due to their unprecedented ability to control the phase, amplitude, and polarization of transmitted, reflected, and diffracted light. Introducing active functionalities to optical metasurfaces is an essential step to the development of next-generation flat optical components and devices. During the last few years, many attempts have been made to develop tunable optical metasurfaces with dynamic control of optical properties (e.g., amplitude, phase, polarization, spatial/spectral/temporal responses) and early-stage device functions (e.g., beam steering, tunable focusing, tunable color filters/absorber, dynamic hologram, etc) based on a variety of novel active materials and tunable mechanisms. These recently-developed active metasurfaces show significant promise for practical applications, but significant challenges still remain. In this review, a comprehensive overview of recently-reported tunable metasurfaces is provided which focuses on the ten major tunable metasurface mechanisms. For each type of mechanism, the performance metrics on the reported tunable metasurface are outlined, and the capabilities/limitations of each mechanism and its potential for various photonic applications are compared and summarized. This review concludes with discussion of several prospective applications, emerging technologies, and research directions based on the use of tunable optical metasurfaces. We anticipate significant new advances when the tunable mechanisms are further developed in the coming years.

Slow light nanocoatings for ultrashort pulse compression

Transparent materials do not absorb light but have profound influence on the phase evolution of transmitted radiation. One consequence is chromatic dispersion, i.e., light of different frequencies travels at different velocities, causing ultrashort laser pulses to elongate in time while propagating. Here we experimentally demonstrate ultrathin nanostructured coatings that resolve this challenge: we tailor the dispersion of silicon nanopillar arrays such that they temporally reshape pulses upon transmission using slow light effects and act as ultrashort laser pulse compressors. The coatings induce anomalous group delay dispersion in the visible to near-infrared spectral region around 800 nm wavelength over an 80 nm bandwidth. We characterize the arrays' performance in the spectral domain via white light interferometry and directly demonstrate the temporal compression of femtosecond laser pulses. Applying these coatings to conventional optics renders them ultrashort pulse compatible and suitable for a wide range of applications.

Phase-only femtosecond optical pulse shaping based on an all-dielectric polarization-insensitive metasurface

Recently, metasurfaces capable of manipulating the amplitude and the phase of an incident wave in a broad frequency band have been employed for femtosecond optical pulse shaping purposes. In this study, we introduce a phase-only pulse shaper based on an all-dielectric CMOS-compatible polarization-insensitive metasurface, composed of Si nano cylinders sitting on a fused silica substrate. The required phase profile of the metasurface for desired waveforms are calculated using an iterative Fourier transform algorithm, and the performance of the pulse shaper metasurface in implementing the phase masks was assessed using full-wave simulations. Such approach for realizing a polarization-insensitive metasurface-based phase-only pulse shaper has never been investigated to the best of our knowledge. It is demonstrated that the simulated results of the proposed metasurface-based pulse shaper is in great agreement with the results of the algorithm, while exhibiting a very high transmission efficiency. This work indicates yet another exciting but not fully examined application of meta-structures that is the optical pulse shaping.

All-optical tunable slow-light based on an analogue of electromagnetically induced transparency in a hybrid metamaterial

We demonstrate and analyze the use of metamaterials featuring an analogue of electromagnetically induced transparency (EIT) in slow light technology. For most metamaterials, EIT-like effects suffer from intrinsic ohmic loss, and the metamaterial-based slow-light effect can only be tuned passively, which limits their application in slow light devices. We propose a hybrid metamaterial with a unit cell composed of a ring resonator formed from photoactive silicon (Si) and a rectangular bar formed from metallic silver (Ag). Based on an analogue of EIT in the designed hybrid metamaterial, we theoretically demonstrate an all-optical tunable slow-light effect in the telecommunication window. We successfully demonstrate the possibility of designing novel all-optical tunable chip-scale slow-light devices that could be used in optical buffering.

Coherent Raman scattering imaging with a near-infrared achromatic metalens

Miniature handheld imaging devices and endoscopes based on coherent Raman scattering are promising for label-free in vivo optical diagnosis. Toward the development of these small-scale systems, a challenge arises from the design and fabrication of achromatic and high-end miniature optical components for both pump and Stokes laser wavelengths. Here, we report a metasurface converting a low-cost plano-convex lens into a water-immersion, nearly diffraction-limited and achromatic lens. The metasurface comprising amorphous silicon nanopillars is designed in a way that all incident rays arrive at the focus with the same phase and group delay, leading to corrections of monochromatic and chromatic aberrations of the refractive lens, respectively. Compared to the case without the metasurface, the hybrid metasurface-refractive lens has higher Strehl ratios than the plano-convex lens and a tighter depth of focus. The hybrid metasurface-refractive lens is utilized in spectroscopic stimulated Raman scattering and coherent anti-Stokes Raman scattering imaging for the differentiation of two different polymer microbeads. Subsequently, the hybrid metalens is harnessed for volumetric coherent Raman scattering imaging of bead and tissue samples. Finally, we discuss possible approaches to integrate such hybrid metalens in a miniature scanning system for label-free coherent Raman scattering endoscopes.

Plasmonic metal nanostructures with extremely small features: new effects, fabrication and applications

Surface plasmons in metals promise many fascinating properties and applications in optics, sensing, photonics and nonlinear fields. Plasmonic nanostructures with extremely small features especially demonstrate amazing new effects as the feature sizes scale down to the sub-nanometer scale, such as quantum size effects, quantum tunneling, spill-out of electrons and nonlocal states etc. The unusual physical, optical and photo-electronic properties observed in metallic structures with extreme feature sizes enable their unique applications in electromagnetic field focusing, spectra enhancing, imaging, quantum photonics, etc. In this review, we focus on the new effects, fabrication and applications of plasmonic metal nanostructures with extremely small features. For simplicity and consistency, we will focus our topic on the plasmonic metal nanostructures with feature sizes of sub-nanometers. Subsequently, we discussed four main and typical plasmonic metal nanostructures with extremely small features, including: (1) ultra-sharp plasmonic metal nanotips; (2) ultra-thin plasmonic metal films; (3) ultra-small plasmonic metal particles and (4) ultra-small plasmonic metal nanogaps. Additionally, the corresponding fascinating new effects (quantum nonlinear, non-locality, quantum size effect and quantum tunneling), applications (spectral enhancement, high-order harmonic wave generation, sensing and terahertz wave detection) and reliable fabrication methods will also be discussed. We end the discussion with a brief summary and outlook of the main challenges and possible breakthroughs in the field. We hope our discussion can inspire the broader design, fabrication and application of plasmonic metal nanostructures with extremely small feature sizes in the future.

Generation of Airy beam arrays in real and K spaces based on a dielectric metasurface

Airy beams are widely used in various optical devices and optical experiments owing to their unique characteristics such as self-acceleration, self-recovery, and non-diffraction. Here we designed and demonstrated a metasurface capable of encoding two phase distributions independently in dual circular polarization channels. We experimentally observed the generated Airy beam arrays loaded on the metasurface in the real and K spaces. Compared with the traditional method, such method provides a more efficient solution to generate large capacity Airy beam arrays with switchable working modes in the broadband spectrum. The results may pave the way for the integration and miniaturization of micro-nano devices and provide a platform for information processing, particle manipulation, space-time optical wave packets, and Airy lasers.

A review of dielectric optical metasurfaces for spatial differentiation and edge detection

Dielectric metasurfaces-based planar optical spatial differentiator and edge detection have recently been proposed to play an important role in the parallel and fast image processing technology. With the development of dielectric metasurfaces of different geometries and resonance mechanisms, diverse on-chip spatial differentiators have been proposed by tailoring the dispersion characteristics of subwavelength structures. This review focuses on the basic principles and characteristic parameters of dielectric metasurfaces as first- and second-order spatial differentiators realized via the Green's function approach. The spatial bandwidth and polarization dependence are emphasized as key properties by comparing the optical transfer functions of metasurfaces for different incident wavevectors and polarizations. To present the operational capabilities of a two-dimensional spatial differentiator in image information acquisition, edge detection is described to illustrate the practicability of the device. As an application example, experimental demonstrations of edge detection for different biological cells and a flower mold are discussed, in which a spatial differentiator and objective lens or camera are integrated in three optical pathway configurations. The realization of spatial differentiators and edge detection with dielectric metasurfaces provides new opportunities for ultrafast information identification in biological imaging and machine vision.

Polarization-controlled efficient and unidirectional surface plasmon polariton excitation enabled by metagratings in a generalized Kretschmann configuration

In this paper, we propose a generalized Kretschmann configuration that employs a metagrating to replace the prism, realizing polarization-controlled efficient and unidirectional surface plasmon polariton (SPP) excitation. This dielectric phase gradient metagrating on the top surface of a silica substrate is designed to deflect incident light, which subsequently launches SPP wave by means of momentum matching on the metal film coated on the bottom surface. A series of metagratings is designed to enable the SPP excitation by circularly or linearly polarized incident light. The flexibility and tunability of this design to efficiently control SPPs show potential to find wide applications in diverse integrated optics and SPP devices.

Terahertz pulse shaping using diffractive surfaces

Recent advances in deep learning have been providing non-intuitive solutions to various inverse problems in optics. At the intersection of machine learning and optics, diffractive networks merge wave-optics with deep learning to design task-specific elements to all-optically perform various tasks such as object classification and machine vision. Here, we present a diffractive network, which is used to shape an arbitrary broadband pulse into a desired optical waveform, forming a compact and passive pulse engineering system. We demonstrate the synthesis of various different pulses by designing diffractive layers that collectively engineer the temporal waveform of an input terahertz pulse. Our results demonstrate direct pulse shaping in terahertz spectrum, where the amplitude and phase of the input wavelengths are independently controlled through a passive diffractive device, without the need for an external pump. Furthermore, a physical transfer learning approach is presented to illustrate pulse-width tunability by replacing part of an existing network with newly trained diffractive layers, demonstrating its modularity. This learning-based diffractive pulse engineering framework can find broad applications in e.g., communications, ultra-fast imaging and spectroscopy.

Large-area, low-cost near-infrared meta-surface reflector based on a pixelated two-dimensional silicon disk array

All-dielectric meta-surfaces composed of dielectric meta-atoms with electric and magnetic multipole resonances provide a low loss alternative to plasmonic meta-surfaces in some optical research fields such as meta-lens and meta-surface holography. We utilize the digital holography lithography technique to obtain the large area meta-surface perfect reflector made of high refractive index and low loss silicon discs arrays, with the capability to delicately control the optical response in the near infrared spectrum. Three types of meta-surface reflectors (discs, truncated cones and diamond-shaped discs) were fabricated, which correspondingly exhibited nearly 1 peak reflectance and greater than 97% average reflectance in their respective perfect reflectance spectral regions. Digital holography lithography only takes 4 min to fabricate millions of photoresist disks over an area of 100 mm², which is high processing efficiency and low cost. The fabrication strategy opens a new avenue for the production of large-area meta-surfaces in the optical field, especially in the mass production of optical communication devices, semiconductor lasers, etc.

Graphene Self-Phase-Lockers Formed around a Cu Wire Hub for Ring Resonators Incorporated into 57.8 Gigahertz Fiber Pulsed Lasers

We demonstrate graphene-functionalized self-phase-locking of laser pulses for a dramatically elevated repetition rate by employing an intrinsic resonating structure in a fiber ring laser cavity, the modes thereby satisfying the phase-matching condition passively, through both the resonator and the laser cavity. Graphene is directly synthesized around a 1-mm-diameter Cu wire catalyst, avoiding the deleterious transfer process. The wire provides a form factor to the fiber ring resonator as a versatile winding hub, guaranteeing damage-minimized and recyclable contact of the synthesized graphene with a diameter-controlled optical microfiber. In-depth analysis of the graphene confirms the optical nonlinearity critically required for pulse formation. The laser-graphene interaction, the intermode phase-locking function of graphene, and the pulse formation with the resonator are systematically elucidated to explain the experimentally generated laser pulses at a repetition rate of 57.8 gigahertz (GHz). Additionally, tunability of the repetition rate up to 1.5 GHz by the photothermal effect of graphene is demonstrated.

Spatiotemporal manipulation on focusing and propagation of surface plasmon polariton pulses

Surface plasmon polariton (SPP) provides an important platform for the design of various nanophotonic devices. However, it is still a big challenge to achieve spatiotemporal manipulation of SPP under both spatially nanoscale and temporally ultrafast conditions. Here, we propose a method of spatiotemporal manipulation of SPP pulse in a plasmonic focusing structure illuminated by a dispersed femtosecond light. Based on dispersion effect of SPP pulse, we achieve the functions of dynamically controlled wavefront rotation in SPP focusing and redirection in SPP propagation within femtosecond range. The influences of structural parameters on the spatiotemporal properties of SPP pulse are numerically studied, and an analytical model is built to explain the results. The spatiotemporal coupling of modulated SPP pulses to dielectric waveguides is also investigated, demonstrating an ultrafast turning of propagation direction. This work has great potential in applications such as on-chip ultrafast photonic information processing, ultrafast beam shaping and attosecond pulse generation.

Multistate Switching of Photonic Angular Momentum Coupling in Phase-Change Metadevices

The coupling between photonic spin and orbital angular momenta is significantly enhanced at the subwavelength scale and has found a plethora of applications in nanophotonics. However, it is still a great challenge to make such kind of coupling tunable with multiple sates. Here, a versatile metasurface platform based on polyatomic phase-change resonators is provided to realize multiple-state switching of photonic angular momentum coupling. As a proof of concept, three coupling modes, namely, symmetric coupling, asymmetric coupling, and no coupling, are experimentally demonstrated at three different crystallization levels of structured Ge₂ Sb₂ Te₅ alloy. In practical applications, coded information can be encrypted in asymmetric mode using the spin degree of freedom, while revealing misleading one without proper phase change or after excessive crystallinity. With these findings, this study may open an exciting direction for subwavelength electromagnetics with unprecedented compactness, allowing to envision applications in active nanophotonics and information security engineering.

Elliptical metallic rings-shaped fractal metamaterial absorber in the visible regime

Achieving the broadband response of metamaterial absorbers has been quite challenging due to the inherent bandwidth limitations. Herein, the investigation was made of a unique kind of visible light metamaterial absorber comprising elliptical rings-shaped fractal metasurface using tungsten metal. It was found that the proposed absorber exhibits average absorption of over 90% in the visible wavelength span of 400-750 nm. The features of perfect absorption could be observed because of the localized surface plasmon resonance that causes impedance matching. Moreover, in the context of optoelectronic applications, the absorber yields absorbance up to ~ 70% even with the incidence obliquity in the range of 0°-60° for transverse electric polarization. The theory of multiple reflections was employed to further verify the performance of the absorber. The obtained theoretical results were found to be in close agreement with the simulation results. In order to optimize the results, the performance was analyzed in terms of the figure of merit and operating bandwidth. Significant amount of absorption in the entire visible span, wide-angle stability, and utilization of low-cost metal make the proposed absorber suitable in varieties of photonics applications, in particular photovoltaics, thermal emitters and sensors.

Deformation Behavior of Glass Nanostructures in Hot Embossing

In the nanoscale glass formation, the flow and deformation behavior of glass materials are quite different from those in the macroscale because the mold cavity influences the viscous flow behaviors of glass because of the size effect. The knowledge of macroglass molding process no longer applies to the fabrication of glass microparts by hot embossing. To investigate the size effect of the mold cavity on glass flow behavior during squeeze flow, patterned molds with different length scales and shapes were used for glass embossing. The experimental results demonstrated that glass structures with ultrafine and atomic scale surface could be fabricated by using precision embossing. The nanostructures of embossed glass at 100 and 500 nm wide cavity were found to exhibit nanoscale effect during squeeze flow. Molecular confinement accelerates the tectonic deformation of embossed glass at smaller length scales. At the microscale filling, the tectonic deformation of embossed glass is mainly dominated by elastic recovery, surface tension, hydrostatic pressure, and viscous flow. As the length scale reduces to submicron, the dual-peak filling mode gradually transfers to the single-peak filling mode. Additionally, deformation modes have little influence on the shapes of the mold cavity. This work sheds light on the fabrication of glass nano/microstructures.

A dielectric metasurface optical chip for the generation of cold atoms

Compact and robust cold atom sources are increasingly important for quantum research, especially for transferring cutting-edge quantum science into practical applications. In this study, we report on a novel scheme that uses a metasurface optical chip to replace the conventional bulky optical elements used to produce a cold atomic ensemble with a single incident laser beam, which is split by the metasurface into multiple beams of the desired polarization states. Atom numbers ~107 and temperatures (about 35 μK) of relevance to quantum sensing are achieved in a compact and robust fashion. Our work highlights the substantial progress toward fully integrated cold atom quantum devices by exploiting metasurface optical chips, which may have great potential in quantum sensing, quantum computing, and other areas.

Octave bandwidth photonic fishnet-achromatic-metalens

Planar structured interfaces, also known as metasurfaces, are continuously attracting interest owing to their ability to manipulate fundamental attributes of light, including angular momentum, phase, or polarization. However, chromatic aberration, limiting broadband operation, has remained a challenge for metasurfaces-based optical components and imagers. The limitation stems from the intrinsic dispersion of existing materials and design principles. Here we report and experimentally demonstrate polarization-independent fishnet-achromatic-metalenses with measured average efficiencies over 70% in the continuous band from the visible (640 nm) to the infrared (1200 nm). Results of the scalable platform are enabling for applications requiring broad bandwidth and high efficiency including energy harvesting, virtual reality and information processing devices, or medical imaging.

Here the authors demonstrate all-dielectric fishnet-achromatic-metalenses from the visible to the near-infrared region. This metalens performs efficiently independent of polarization over about an octave from 640 nm to 1200 nm.

Simultaneous Full-Color Printing and Holography Enabled by Centimeter-Scale Plasmonic Metasurfaces

Optical metasurfaces enable novel ways to locally manipulate light's amplitude, phase, and polarization, underpinning a newly viable technology for applications, such as high-density optical storage, holography, and displays. Here, a high-security-level platform enabled by centimeter-scale plasmonic metasurfaces with full-color, high-purity, and enhanced-information-capacity properties is proposed. Multiple types of independent information can be embedded into a single metamark using full parameters of light, including amplitude, phase, and polarization. Under incoherent white light, the metamark appears as a polarization- and angle-encoded full-color image with flexibly controlled hue, saturation, and brightness, while switching to multiwavelength holograms under coherent laser illumination. More importantly, for actual applications, the extremely shallow functional layer makes such centimeter-scale plasmonic metamarks suitable for cost-effective mass production processes. Considering these superior performances of the presented multifunctional plasmonic metasurfaces, this work may find wide applications in anticounterfeiting, information security, high-density optical storage, and so forth.

Metasurfaces help lasers to mode-lock

Metasurface saturable absorbers may result in versatile mode-locking that allows one to obtain stable ultrashort laser pulses with high repetition rates and peak powers, along with broadband operation, within fiber to solid-state laser cavities.

Low-loss metasurface optics down to the deep ultraviolet region

Shrinking conventional optical systems to chip-scale dimensions will benefit custom applications in imaging, displaying, sensing, spectroscopy, and metrology. Towards this goal, metasurfaces-planar arrays of subwavelength electromagnetic structures that collectively mimic the functionality of thicker conventional optical elements-have been exploited at frequencies ranging from the microwave range up to the visible range. Here, we demonstrate high-performance metasurface optical components that operate at ultraviolet wavelengths, including wavelengths down to the record-short deep ultraviolet range, and perform representative wavefront shaping functions, namely, high-numerical-aperture lensing, accelerating beam generation, and hologram projection. The constituent nanostructured elements of the metasurfaces are formed of hafnium oxide-a loss-less, high-refractive-index dielectric material deposited using low-temperature atomic layer deposition and patterned using high-aspect-ratio Damascene lithography. This study opens the way towards low-form factor, multifunctional ultraviolet nanophotonic platforms based on flat optical components, enabling diverse applications including lithography, imaging, spectroscopy, and quantum information processing.

Photonic Spin-Multiplexing Metasurface for Switchable Spiral Phase Contrast Imaging

As the two most representative operation modes in an optical imaging system, bright-field imaging and phase contrast imaging can extract different morphological information on an object. Developing a miniature and low-cost system capable of switching between these two imaging modes is thus very attractive for a number of applications, such as biomedical imaging. Here, we propose and demonstrate that a Fourier transform setup incorporating an all-dielectric metasurface can perform a two-dimensional spatial differentiation operation and thus achieve isotropic edge detection. In addition, the metasurface can provide two spin-dependent, uncorrelated phase profiles across the entire visible spectrum. Therefore, based on the spin-state of incident light, the system can be used for either diffraction-limited bright-field imaging or isotropic edge-enhanced phase contrast imaging. Combined with the advantages of planar architecture and ultrathin thickness of the metasurface, we envision this approach may open new vistas in the very interdisciplinary field of imaging and microscopy.

Optical analog computing of spatial differentiation and edge detection with dielectric metasurfaces

We propose and demonstrate that optical analog computing of spatial differentiation and edge detection can be realized with a single layer of dielectric metasurface. The optical transfer function for second-order derivation is obtained by engineering the spatial dispersion of electric dipole resonance supported by the silicon nanodisks in the metasurface. Benefiting from this unique mechanism of electric dipole resonance, spatial differentiation can be performed for two dimensions and arbitrary polarization with a large spatial bandwidth and high efficiency at the visible wavelength. Explicitly, we have numerically validated the application with one-dimensional spatial functions as well as an image, and the results show excellent performance. Our study can facilitate the research of optical computing with artificial nanostructures.

Ultra-compact visible light depolarizer based on dielectric metasurface

With rapid development towards shrinking the size of traditional photonic systems such as cameras, spectrometers, displays and illumination systems, there is an urgent need for high performance and ultra-compact functional optical elements. The large footprint of traditional bulky optical elements, their monofunctional response and the inability for direct integration into nanophotonic devices have severely limited progress in this area. Metasurfaces, consisting of an array of subwavelength nanoscatterers with spatially varying geometries, have shown remarkable performance as ultrathin multifunctional optical elements. Here, based on an all-dielectric metasurface, we propose and experimentally demonstrate a spatial domain optical depolarizer capable of efficiently depolarizing linearly polarized light in the visible spectral band from 450 nm to 670 nm, with a degree of polarization of less than 10 %. Remarkably, it is capable of depolarizing light beam with a diameter down to several micrometers, about two orders of magnitude smaller than commercial liquid crystal depolarizers. Furthermore, the long response time, bulky footprint, tight optical alignment tolerance and large pixel size severely limit the performance and system integration of commercial depolarizers. We envision the metasurface depolarizer to find applications in next generation ultra-compact grating spectrometers and illumination systems.

Tunable metasurfaces for visible and SWIR applications

Demand on optical or photonic applications in the visible or short-wavelength infrared (SWIR) spectra, such as vision, virtual or augmented displays, imaging, spectroscopy, remote sensing (LIDAR), chemical reaction sensing, microscopy, and photonic integrated circuits, has envisaged new type of subwavelength-featured materials and devices for controlling electromagnetic waves. The study on metasurfaces, of which the thickness is either comparable to or smaller than the wavelength of the considered incoming electromagnetic wave, has been grown rapidly to embrace the needs of developing sub 100-micron active photonic pixelated devices and their arrayed form. Meta-atoms in metasurfaces are now actively controlled under external stimuli to lead to a large phase shift upon the incident light, which has provided a huge potential for arrayed two-dimensional active optics. This short review summarizes actively tunable or reconfigurable metasurfaces for the visible or SWIR spectra, to account for the physical operating principles and the current issues to overcome.

Low-index dielectric metasurfaces supported by metallic substrates for efficient second-harmonic generation in the blue-ultraviolet range

Despite the great importance of high-index materials for dielectric nanophotonics, their optical functionalities are significantly limited for diverse photonic applications and thus, the usability of low-index materials should be explored. This work proposes the use of metallic substrates for low-index dielectric metasurfaces for significantly enhancing the local field and their optical responses. Plasmon-assisted dipole resonances mainly contribute to field enhancement in dielectric nanoparticles comprising the metasurfaces, where the intensity enhancement increases on decreasing the index of the nanoparticles when supported by metallic substrates. Another challenge with the current high-index materials is strong optical losses in the blue-ultraviolet range, which limit their practical applications such as harmonic generations in this spectral range. For a pump with a peak intensity of about 3.4 GW cm-2, a metasurface of lithium niobate nanodisk array supported by a gold substrate generates second harmonic at 400 nm with an efficiency of about 5 × 10-2%, which is one order of magnitude higher than the previously reported efficiency of harmonic generation in this range. The results presented in this work promise the significant extension of the current nonlinear nanophotonics, which is limited to high-index semiconducting materials.