Latex Clearing Protein (Lcp) of Streptomyces sp. Strain K30 Is a b-Type Cytochrome and Differs from Rubber Oxygenase A (RoxA) in Its Biophysical Properties

Endophytic bacterial diversity in the latex-bearing caulosphere of Hevea brasiliensis Müll. Arg

Rubber trees are a commercial cash crop, and the milky latex or polyisoprene they produce is the natural source of rubber. Little is known about the bacterial populations found in active zone of latex-bearing caulosphere. We employed a tailored cloud microbial bioinformatic approach for the identification and potential hypothetical ecological roles of an uncultured endophytic hidden bacterial community in the active zone of the latex-bearing caulosphere of Hevea brasiliensis. Small pieces of slivers were collected from healthy plant from the village: Belonia, South Tripura, rubber plantation in Northeastern India. These uncultured bacteria were identified using the V3-V4 hypervariable amplicon region of the 16 S rDNA gene. A total of 209,586 contigs have been generated. EasyMAP Version 1.0, a cloud-based microbial bioinformatics tool with an integrated QIIME2 pipeline, was used to analyze contigs. We detected 15 phyla and 91 OTUs (operational taxonomic units). Proteobacteria (73.5%) was the most enriched phylum, followed by Firmicutes (13.8%), Bacteroidetes (5.2%), and Actinobacteria (3.2%). Ammonia oxidizers, sulfate reducers, dehalogenation, chitin degradation, nitrite reducers, and aromatic hydrocarbon degraders were the most prevalent functional categories in the active zones of caulosphere. Furthermore, Gammaproteobacteria (49.2%) and Erwinia (29.19%) were the most abundant classes and genera of endophytic bacterial communities. Thus, the presence of a substantial amount of phosphate-solubilizing Gammaproteobacteria (PSB) may stimulate growth, increase plant resilience, suppress disease, and aid in the rubber and sugar breakdown. This is the first report of microbial endophytes associated with Hevea caulosphere.

Computational investigation of cis-1,4-polyisoprene binding to the latex-clearing protein LcpK30

Latex clearing proteins (Lcps) catalyze the oxidative cleavage of the C = C bonds in cis-1,4-polyisoprene (natural rubber), producing oligomeric compounds that can be repurposed to other materials. The active catalytic site of Lcps is buried inside the protein structure, thus raising the question of how the large hydrophobic rubber chains can access the catalytic center. To improve our understanding of hydrophobic polymeric substrate binding to Lcps and subsequent catalysis, we investigated the interaction of a substrate model containing ten carbon-carbon double bonds with the structurally characterized LcpK30, using multiple computational tools. Prediction of the putative tunnels and cavities in the LcpK30 structure, using CAVER-Pymol plugin 3.0.3, fpocket and Molecular Dynamic (MD) simulations provided valuable insights on how substrate enters from the surface to the buried active site. Two dominant tunnels were discovered that provided feasible routes for substrate binding, and the presence of two hydrophobic pockets was predicted near the heme cofactor. The larger of these pockets is likely to accommodate the substrate and to determine the size distribution of the oligomers. Protein-ligand docking was carried out using GOLD software to predict the conformations and interactions of the substrate within the protein active site. Deeper insight into the protein-substrate interactions, including close-contacts, binding energies and potential cleavage sites in the cis-1,4-polyisoprene, were obtained from MD simulations. Our findings provide further justification that the protein-substrate complexation in LcpK30 is mainly driven by the hydrophobic interactions accompanied by mutual conformational changes of both molecules. Two potential binding modes were identified, with the substrate in either extended or folded conformations. Whilst binding in the extended conformation was most favorable, the folded conformation suggested a preference for cleavage of a central double bond, leading to a preference for oligomers with 5 to 6 C = C bonds. The results provide insight into further enzyme engineering studies to improve catalytic activity and diversify the substrate and product scope of Lcps.

Enhanced biodegradation activity toward polyethylene by fusion protein of anchor peptide and Streptomyces sp. strain K30 latex clearing protein

Polyethylene is the most commonly used plastic product, and its biodegradation is a worldwide problem. Latex clearing protein derived from Streptomyces sp. strain K30 (LcpK30) has been reported to be able to break the carbon-carbon double bond inside oxidized polyethylene and is an effective biodegradation enzyme for polyethylene. However, the binding of the substrate to the enzyme was difficult due to the hydrophobic nature of polyethylene. Therefore, to further improve the efficiency of LcpK30, the effect of different anchor peptides on the binding capacity of LcpK30 to the substrate was screened in this study. The results of fluorescence confocal microscopy showed that the anchoring peptide LCI had the most significant improvement in effect and was finally selected for further application in a UV-irradiated PE degradation system. The degradation results showed that LCI was able to improve the degradation efficiency of LcpK30 by approximately 1.15 times in the presence of equimolar amounts of protein compared with wild-type. This study further improves the application of LcpK30 in the field of polyethylene degradation by modification.

Rubber Oxygenase Degradation Assay by UV-Labeling and Gel Permeation Chromatography

A versatile and robust end-group derivatization approach using oximes has been developed for the detection of oxidative degradation of synthetic polyisoprenes and polybutadiene. This method demonstrates broad applicability, effectively monitoring degradation across a wide molecular weight range through ultraviolet (UV)-detection coupled to gel permeation chromatography. Importantly, it enables the effective monitoring of degradation via derivatization-induced UV-maximum shifts, even in the presence of an excess of undegraded polyene, overcoming limitations previously reported with refractive index detectors. Notably, this oxime-based derivatization methodology is used in enzymatic degradation experiments of synthetic polyisoprenes characterized by a cis: trans ratio with the rubber oxygenase LcpK30. It reveals substantial UV absorption in derivatized enzymatic degradation products of polyisoprene with molecular weights exceeding 1000 g mol-1 - an unprecedented revelation for this enzyme's activity on such synthetic polyisoprenes. This innovative approach holds promise as a valuable tool for advancing research into the degradation of synthetic polyisoprenes and polybutadiene, particularly under conditions of low organocatalytic or enzymatic degradation activity. With its broad applicability and capacity to reveal previously hidden degradation processes, it represents a noteworthy contribution to sustainable polymer chemistry.

Enhancing the heterologous expression of latex clearing protein from Streptomyces sp. strain K30 in Escherichia coli through fermentation condition optimization and molecular modification

Latex clearing protein from Streptomyces sp. strain K30 (LcpK30) is a natural oxidoreductase that can catalyse the cleavage of rubber through dioxygenation. It has significant potential applications in polymer degradation. However, its limited expression in engineered strains restricts its utility. This study aimed to enhance the soluble expression and enzyme activity of LcpK30 in E. coli BL21 (DE3) by optimizing fermentation conditions and making molecular modifications. The enzyme activity reached 5.05 U·mL-1 by optimizing the induction conditions, adding cofactors, and using chemical chaperones, which was 237.1 % of the initial case. Further enhancements in soluble expression were achieved through site mutations guided by the PROSS server, resulting in 8 out of 13 mutants with increased protein expression, a high positive mutation rate of 61.5 %. Subsequently, combined mutants were created by merging single mutants with enhanced protein expression and enzyme activity. The top three double mutants, G91D/S149A, G91D/A210H, and G91D/H296P, displayed expression levels at 173.3 %, 173.3 %, and 153.3 % of the wild-type LcpK30, respectively. These mutants also exhibited enhanced fermentation enzyme activity, reaching 149.5 %, 250.0 %, and 420.2 % compared to the wild-type, along with improved specific activities. This study provides insights for the efficient production of LcpK30 and a practical foundation for its application.

Characterization of Latex-Clearing Protein and Aldehyde Dehydrogenases Involved in the Utilization of poly(cis-1,4-isoprene) by Nocardia farcinica NBRC 15532

Microbial degradation of natural rubber and synthetic poly(cis-1,4-isoprene) is expected to become an alternative treatment system for waste from poly(cis-1,4-isoprene) products including scrap tires. Nocardia farcinica NBRC 15,532, a gram-positive rubber-degrading bacterium, can utilize poly(cis-1,4-isoprene) as the sole source of carbon and energy to produce oligo-isoprene metabolites containing aldehyde and keto end groups. A homology-based search of the genome revealed a gene encoding a latex-clearing protein (Lcp). Gene disruption analysis indicated that this gene is essential for the utilization of poly(cis-1,4-isoprene) in this strain. Further analysis of the genome sequence identified aldehyde dehydrogenase (ALDH) genes as potential candidates for oxidative degradation of oligo-isoprene aldehydes. Based on the enzymatic activity of the ALDH candidates, NF2_RS14000 and NF2_RS14385 may be involved in the degradation of oligo-isoprene aldehydes. Analysis of the reaction products revealed that these ALDHs oxidized tri- to penta-isoprene aldehydes, which were generated by the reaction of Lcp. Based on the inability of ALDH gene deletion mutants, we concluded that NF2_RS14000 is mainly involved in the utilization of poly(cis-1,4-isoprene) and the oxidative degradation of oligo-isoprene aldehydes in Nocardia farcinica NBRC 15,532.

Biodegradation of rubber in cultures of Rhodococcus rhodochrous and by its enzyme latex clearing protein

The biodegradation of rubber materials is considered as a sustainable recycling alternative, highlighting the use of microorganisms and enzymes in oxidative processes of natural rubber. Currently, the main challenge is the treatment of rubber materials such as waste tyres, where the mixture of rubber polymers with different additives and the cross-linked structure obtained due to the vulcanisation process positions them as highly persistent materials. This study characterises the degradation of different rubber-containing substrates in in vivo and in vitro processes using the bacterium Rhodococcus rhodochrous and the oxygenase latex clearing protein (Lcp) from the same strain. For the first time, the degradation of polyisoprene particles in liquid cultures of R. rhodochrous was analysed, obtaining up to 19.32% mass loss of the polymer when using it as the only carbon source. Scanning electron microscopy analysis demonstrated surface alteration of pure polyisoprene and vulcanised rubber particles after 2 weeks of incubation. The enzyme Lcp_RR was produced in bioreactors under rhamnose induction and its activity characterised in oxygen consumption assays at different enzyme concentrations. A maximum consumption of 28.38 µmol_O2/min was obtained by adding 100 µg/mL Lcp_RR to a 2% (v/v) latex emulsion as substrate. The bioconversion of natural rubber into reaction degradation products or oligoisoprenoids was calculated to be 32.54%. Furthermore, the mass distribution of the oligoisoprenoids was analysed by liquid chromatography coupled to mass spectrometry (LC-MS) and 17 degradation products, ranging from C20 to C100 oligoisoprenoids, were identified. The multi-enzymatic degradation capacity of R. rhodochrous positions it as a model microorganism in complex degradation processes such as in the case of tyre waste.

Microbial enzymes will offer limited solutions to the global plastic pollution crisis

Global economies depend on the use of fossil-fuel-based polymers with 360-400 million metric tons of synthetic polymers being produced per year. Unfortunately, an estimated 60% of the global production is disposed into the environment. Within this framework, microbiologists have tried to identify plastic-active enzymes over the past decade. Until now, this research has largely failed to deliver functional biocatalysts acting on the commodity polymers such as polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), ether-based polyurethane (PUR), polyamide (PA), polystyrene (PS) and synthetic rubber (SR). However, few enzymes are known to act on low-density and low-crystalline (amorphous) polyethylene terephthalate (PET) and ester-based PUR. These above-mentioned polymers represent >95% of all synthetic plastics produced. Therefore, the main challenge microbiologists are currently facing is in finding polymer-active enzymes targeting the majority of fossil-fuel-based plastics. However, identifying plastic-active enzymes either to implement them in biotechnological processes or to understand their potential role in nature is an emerging research field. The application of these enzymes is still in its infancy. Here, we summarize the current knowledge on microbial plastic-active enzymes, their global distribution and potential impact on plastic degradation in industrial processes and nature. We further outline major challenges in finding novel plastic-active enzymes, optimizing known ones by synthetic approaches and problems arising through falsely annotated and unfiltered use of database entries. Finally, we highlight potential biotechnological applications and possible re- and upcycling concepts using microorganisms.

Degradation of UV-pretreated polyolefins by latex clearing protein from Streptomyces sp. Strain K30

Plastic products made of polyethylene (PE), polypropylene (PP), and polystyrene (PS) are widely used in daily life and industrial production. Polyolefins-which have a very stable structure and do not contain any active molecular groups-are difficult to degrade and pose a serious global environment threat. This study selected latex clearing protein (Lcp_K30) derived from Streptomyces sp. Strain K30. The natural substrate of the enzyme is rubber (cis-1, 4-polyisoprene), and the site of action is the carbon‑carbon double bond. Lcp_K30 was incubated with UV-irradiated polyolefin PE, PP and PS (UV-PE, UV-PP, and UV-PS containing carbon‑carbon double bonds) for 5 d at 37 °C. The results showed that UV-PE-Lcp_K30 was more fragmented than UV-PE-blank; the Fourier transform infrared spectroscopy results showed that UV-PE-Lcp_K30 and UV-PP-Lcp_K30 produced new active groups (e.g., -OH and -C=O); however, the effect on UV-PS was not significant. Scanning electron microscopy results showed that the treated group had more obvious roughness, cracks, and pits than the control group. The results of high-temperature gel permeation chromatography showed that the average molecular weight (M_w) of UV-PE-Lcp_K30 and UV-PP-Lcp_K30 decreased; the M_w of UV-PE5-Lcp_K30 was reduced by 42.02%. The results of gas chromatography-mass spectrometry showed the production of ketones. Therefore, the Lcp_K30 latex clearing protein degrade UV-oxidized polyolefin plastics and has great potential for PE and PP degradation but may not be suitable for PS. Furthermore, other Lcps (such as Lcp_NRRL, Lcp_NVL3) can also degrade UV-PE.

Microbial Degradation of Rubber: Actinobacteria

Rubber is an essential part of our daily lives with thousands of rubber-based products being made and used. Natural rubber undergoes chemical processes and structural modifications, while synthetic rubber, mainly synthetized from petroleum by-products are difficult to degrade safely and sustainably. The most prominent group of biological rubber degraders are Actinobacteria. Rubber degrading Actinobacteria contain rubber degrading genes or rubber oxygenase known as latex clearing protein (lcp). Rubber is a polymer consisting of isoprene, each containing one double bond. The degradation of rubber first takes place when lcp enzyme cleaves the isoprene double bond, breaking them down into the sole carbon and energy source to be utilized by the bacteria. Actinobacteria grow in diverse environments, and lcp gene containing strains have been detected from various sources including soil, water, human, animal, and plant samples. This review entails the occurrence, physiology, biochemistry, and molecular characteristics of Actinobacteria with respect to its rubber degrading ability, and discusses possible technological applications based on the activity of Actinobacteria for treating rubber waste in a more environmentally responsible manner.

In vitro studies on the degradation of common rubber waste material with the latex clearing protein (Lcp1VH2) of Gordonia polyisoprenivorans VH2

The enzymatic degradation of the rubber polymer poly(cis-1,4-isoprene), e.g. by the latex clearing protein Lcp1_VH2 of Gordonia polyisoprenivorans VH2 has been demonstrated with latex milk or pure isoprene-rubber particles, recently. Unfortunately, carbon black filled vulcanized rubber (CFVR) making the biggest part of worldwide rubber wastes, contains several harmful additives making microbial and enzymatic rubber degradation challenging. However, this study demonstrates the successful enzymatic cleavage of industrially produced CFVR. The formation of the cleavage products, oligo(cis-1,4-isoprenoids), from incubating CFVR particles with Lcp1_VH2 was detected by HPLC-MS. Various organic solvents were tested to remove harmful or inhibiting additives like antioxidants to enhance product formation. The pretreatment of CFVR particles, especially with chloroform or cyclohexane, significantly improved the degradation. It was also demonstrated that reducing the particles size and thus increasing the enzymatically accessible surface area of the particles led to a strong acceleration of the degradation process. Furthermore, ATR-IR analyses showed that Lcp1_VH2 led to the functionalization of the rubber particle surface with carbonyl groups by cleaving isoprene chains, still linked to the particle. Both, the oligo(cis-1,4-isoprenoids) as well as the functionalized rubber particles, are potentially important products, which can be reused as fine chemicals or as additives in rubber production. The present study, showing the enzymatic degradation of common CFVR for the first time, takes an important step towards a new way of rubber waste disposal and indicates the economic feasibility of an efficient and environmentally friendly recycling process by using the rubber oxygenase Lcp1_VH2.

Bacterial and enzymatic degradation of poly(cis-1,4-isoprene) rubber: Novel biotechnological applications

Poly(cis-1,4-isoprene) rubber is a highly demanded elastomeric material mainly used for the manufacturing of tires. The end-cycle of rubber-made products is creating serious environmental concern and, therefore, different recycling processes have been proposed. However, the current physical-chemical processes include the use of hazardous chemical solvents, large amounts of energy, and possibly generations of unhealthy micro-plastics. Under this scenario, eco-friendly alternatives are needed and biotechnological rubber treatments are demonstrating huge potential. The cleavage mechanisms and the biochemical pathways for the uptake of poly(cis-1,4-isoprene) rubber have been extensively reported. Likewise, novel bacterial strains able to degrade the polymer have been studied and the involved structural and functional enzymes have been analyzed. Considering the fundamentals, biotechnological approaches have been proposed considering process optimization, cost-effective methods and larger-scale experiments in the search for practical and realistic applications. In this work, the latest research in the rubber biodegradation field is shown and discussed, aiming to analyze the combination of detoxification, devulcanization and polymer-cleavage mechanisms to achieve better degradation yields. The modified superficial structure of rubber materials after biological treatments might be an interesting way to reuse old rubber for re-vulcanization or to find new materials.

Global Regulator of Rubber Degradation in Gordonia polyisoprenivorans VH2: Identification and Involvement in the Regulation Network

A cAMP receptor protein (CRP_VH2) was detected as a global regulator in Gordonia polyisoprenivorans VH2 and was proposed to participate in the network regulating poly(cis-1,4-isoprene) degradation as a novel key regulator. CRP_VH2 shares a sequence identity of 79% with GlxR, a well-studied global regulator of Corynebacterium glutamicum Furthermore, CRP_VH2 and GlxR have a common oligomerization state and similar binding motifs, and thus most likely have similar functions as global regulators. Size exclusion chromatography of purified CRP_VH2 confirmed the existence as a homodimer with a native molecular weight of 44.1 kDa in the presence of cAMP. CRP_VH2 bound to the TGTGAN₆TCACT motif within the 131-bp intergenic region of divergently oriented lcp1 _VH2 and lcpR _VH2, encoding a latex clearing protein and its putative repressor, respectively. DNase I footprinting assays revealed the exact operator size of CRP_VH2 in the intergenic region (25 bp), which partly overlapped with the proposed promoters of lcpR _VH2 and lcp1 _VH2 Our findings indicate that CRP_VH2 represses the expression of lcpR _VH2 while simultaneously directly or indirectly activating the expression of lcp1 _VH2 by binding the competing promoter regions. Furthermore, binding of CRP_VH2 to upstream regions of additional putative enzymes of poly(cis-1,4-isoprene) degradation was verified in vitro. In silico analyses predicted 206 CRP_VH2 binding sites comprising 244 genes associated with several functional categories, including carbon and peptide metabolism, stress response, etc. The gene expression regulation of several subordinated regulators substantiated the function of CRP_VH2 as a global regulator. Moreover, we anticipate that the novel lcpR regulation mechanism by CRPs is widespread in other rubber-degrading actinomycetes.IMPORTANCE In order to develop efficient microbial recycling strategies for rubber waste materials, it is required that we understand the degradation pathway of the polymer and how it is regulated. However, only little is known about the transcriptional regulation of the rubber degradation pathway, which seems to be upregulated in the presence of the polymer. We identified a novel key regulator of rubber degradation (CRP_VH2) that regulates several parts of the pathway in the potent rubber-degrader G. polyisoprenivorans VH2. Furthermore, we provide evidence for a widespread involvement of CRP regulators in the degradation of rubber in various other rubber-degrading actinomycetes. Thus, these novel insights into the regulation of rubber degradation are essential for developing efficient microbial degradation strategies for rubber waste materials by this group of actinomycetes.

Characterization of the genes responsible for rubber degradation in Actinoplanes sp. strain OR16

A Gram-positive rubber-degrading bacterium, Actinoplanes sp. strain OR16 (strain NBRC 114529), is able to grow on agar plates containing natural and synthetic rubber as the sole sources of carbon and energy. When this strain was grown on natural rubber latex overlay agar plates, translucent halos around the cells were observed. To identify the natural rubber degradation genes and other features of its metabolism, its complete genome sequence was determined. The genome of OR16 consists of 9,293,892 bp and comprises one circular chromosome (GenBank accession number AP019371.1) with a G + C content of 70.3%. The genome contains 8238 protein-coding and 18 rRNA genes. A homology search of the genome sequence revealed that three genes (lcp1, lcp2, and lcp3) are homologous to an extracellular latex-clearing protein (Lcp) of Streptomyces sp. K30. RT-PCR analysis revealed that lcp1 and lcp2 seem to constitute an operon. Purified lcp gene products have oxygen consumption activity toward natural rubber latex, suggesting that all these genes encode rubber-degrading enzymes in OR16. Quantitative reverse transcription-PCR analysis indicated that the transcription of these genes is induced during the growth of OR16 on natural rubber. The genes located adjacent to lcp1 and lcp3, which code for a TetR/AcrR-type transcriptional regulator, can bind to the promoter regions of these lcp genes. It is suggested that the putative regulators play a role in regulating the transcription of the lcp genes. These results strongly suggested that three lcp genes are required for the utilization of natural rubber in strain OR16. Key Points • The complete genome sequence of Actinoplanes sp. strain OR16 was determined. • Three lcp genes which are involved in the natural rubber degradation in OR16 were identified. • Transcription of these lcp genes is induced during utilization of rubber in OR16. • Two regulators, which bind to the promoter regions of lcp, were determined.

Mechanical Insights into the Enzymatic Cleavage of Double C-C Bond in Poly(cis-1,4-isoprene) by the Latex Clearing Protein

The b-type cytochrome Lcp_K30 is a latex clearing protein (Lcp), which acts as an endotype dioxygenase to catalyze the extracellular cleavage of the chemically inert aliphatic polymer poly(cis-1,4-isoprene), producing oligo-isoprenoids with different terminal carbonyl groups (aldehyde and ketone, -CH₂-CHO and -CH₂-COCH₃). On the basis of the fact that the muteins of E148A, E148Q, and E148H have substantially reduced reactivity, and the E148-initiated reaction mechanism has been previously proposed, in which a cyclic dioxetane intermediate or an epoxide intermediate may be involved, however, open questions still remain. In this paper, on the basis of the crystal structure of Lcp_K30, the enzyme-substrate reactant model was constructed, and the cleavage mechanism of the central double bond of poly(cis-1,4-isoprene) was elucidated by performing quantum mechanics/molecular mechanics calculations. Our calculation results revealed that the oxidative cleavage reaction is triggered by the addition of the heme-bound dioxygen to the double bond of the polymer, and E148 does not act as the catalytic base to extract the allylic proton to assist the reaction as previously suggested. Of the two considered pathways, the pathway that involves the dioxetane intermediate was calculated to be more favorable. During the catalysis, the distal oxygen first adds to the double bond of the substrate to form a radical intermediate, and then the Fe-O1 (proximal oxygen) bond cleaves to generate the dioxetane intermediate, which can easily collapse affording the final ketone and aldehyde products. In general, the cleavage mechanism of double C-C bond catalyzed by Lcp_K30 is similar to those of indoleamine 2,3-dioxygenase, tryptophan 2,3-dioxygenase, and the nonheme stilbene cleavage oxygenase NOV1 that all depend on the iron-bound dioxygen to initiate the cleavage reaction.

Fragmentation of plastic objects in a laboratory seawater microcosm

We studied the fragmentation of conventional thermoplastic and compostable plastic items in a laboratory seawater microcosm. In the microcosm, polyurethane foams, cellulose acetate cigarette filters, and compostable polyester and polylactic acid items readily sank, whereas polyethylene air pouches, latex balloons, polystyrene foams and polypropylene cups remained afloat. Microbial biofilms dominated by Cyanobacteria, Proteobacteria, Planctomycetes and Bacteriodetes grew on the plastics, and caused some of the polyethylene items to sink to the bottom. Electrical resistances (ER) of plastic items decreased as function of time, an indication that seawater had penetrated into microscopic crevices in the plastic that had developed over time. Rate constants for ER decrease in polyethylene items in the microcosm were similar to tensile elongation decrease of polyethylene sheets floating in sea, measured previously by others. Weight loss of plastic items was ≤ 1% per year for polyethylene, polystyrene and polypropylene, 3-5% for latex, polyethylene terephthalate and polyurethane, 15% for cellulose acetate, and 7-27% for polyester and polylactic acid compostable bags. The formation of microplastics observed in the microcosm was responsible for at least part of the weight loss. This study emphasizes the need to obtain experimental data on plastic litter degradation under conditions that are realistic for marine environments.

Poly(cis-1,4-isoprene)-cleavage enzymes from natural rubber-utilizing bacteria

Natural rubber and synthetic poly(cis-1,4-isoprene) are used industrially in the world. Microbial utilization for the isoprene rubbers has been reported in gram-positive and gram-negative bacteria. Poly(cis-1,4-isoprene)-cleavage enzymes that are secreted by rubber-utilizing bacteria cleave the poly(cis-1,4-isoprene) chain to generate low-molecular-weight oligo(cis-1,4-isoprene) derivatives containing aldehyde and ketone groups. The resulting products are converted to the compounds including carboxyl groups, which could then be further catabolized through β-oxidation pathway. One of poly(cis-1,4-isoprene)-cleavage enzymes is latex-clearing protein (Lcp) that was found in gram-positive rubber degraders including Streptomyces, Gordonia, Rhodococcus, and Nocardia species. The other one is rubber oxygenase A and B (RoxA/RoxB) which have been identified from gram-negative rubber degraders such as Steroidobacter cummioxidans and Rhizobacter gummiphilus. Recently, the transcriptional regulation mechanisms for Lcp-coding genes in gram-positive bacteria have been characterized. Here, the current knowledge of genes and enzymes for the isoprene rubber catabolism were summarized.

Enzymatic degradation of plant biomass and synthetic polymers

Plant biomass is an abundant renewable resource on Earth. Microorganisms harvest energy from plant material by means of complex enzymatic systems that efficiently degrade natural polymers. Intriguingly, microorganisms have evolved to exploit these ancient mechanisms to also decompose synthetic plastic polymers. In this Review, we summarize the mechanisms by which they decompose non-starch plant biomass and the six major types of synthetic plastics. We focus on the structural features of the enzymes that contribute to substrate recognition and then describe the catalytic mechanisms of polymer metabolism. An understanding of these natural biocatalysts is valuable if we are to exploit their potential for the degradation of synthetic polymers.

High yield production of the latex clearing protein from Gordonia polyisoprenivorans VH2 in fed batch fermentations using a recombinant strain of Escherichia coli

The enzymatic degradation of rubber with the latex clearing protein (Lcp1_VH2) from Gordonia polyisoprenivorans VH2, is a promising option as an environmentally friendly and economical solution to treat the enormous amount of rubber waste. Here we present a fed batch fermentation process on a 10 L scale, using E.coli C41 pET23a(+)::Hislcp1_VH2 and a modified defined mineral salt medium, designed for high cell densities, for a proper synthesis of Lcp1_VH2. Particularly, providing complex media components, as well as hemin, as precursor of the essential heme b cofactor, resulted in a 2.9-fold higher yield of active Lcp1_VH2 with increased specific activity, due to a better occupancy of the enzyme with the cofactor. Based on this optimization, the fed batch fermentation with an initial glucose feed, followed by a lactose-glycerol feed, finally gained a cell dry weight of 60 g L^-1 and a yield of 223 mg L^-1 of soluble, active Lcp1_VH2. Compared to a recently published fermentation process, which used a complex auto-induction medium, we significantly increased the biomass up to nearly 10-fold and the total Lcp1_VH2 yield up to 3.7-fold. Thereby we reduced the costs for the medium by 75 %, taking the next step towards industrial production of rubber degrading enzymes.

Towards the understanding of the enzymatic cleavage of polyisoprene by the dihaem-dioxygenase RoxA

Utilization of polyisoprene (natural rubber) as a carbon source by Steroidobacter cummioxidans 35Y (previously Xanthomonas sp. strain 35Y) depends on the formation and secretion of rubber oxygenase A (RoxA). RoxA is a dioxygenase that cleaves polyisoprene to 12-oxo-4,8-dimethyl-trideca-4,8-diene-1-al (ODTD), a suitable growth substrate for S. cummioxidans. RoxA harbours two non-equivalent, spectroscopically distinguishable haem centres. A dioxygen molecule is bound to the N-terminal haem of RoxA and identifies this haem as the active site. In this study, we provide insights into the nature of this unusually stable dioxygen-haem coordination of RoxA by a re-evaluation of previously published together with newly obtained biophysical data on the cleavage of polyisoprene by RoxA. In combination with the meanwhile available structure of RoxA we are now able to explain several uncommon and previously not fully understood features of RoxA, the prototype of rubber oxygenases in Gram-negative rubber-degrading bacteria.

Solimonas fluminis has an active latex-clearing protein

The utilization of rubber (poly (cis-1,4-isoprene)) by rubber-degrading bacteria depends on the synthesis of rubber oxygenases that cleave the polymer extracellularly to low molecular weight products that can be taken up and used as a carbon source. All so far described Gram-negative rubber-degrading species use two related ≈ 70 kDa rubber oxygenases (RoxA and RoxB) for the primary attack of rubber while all described Gram-positive rubber-degrading strains use RoxA/RoxB-unrelated latex-clearing proteins (Lcps, ≈ 40 kDa) as rubber oxygenase(s). In this study, we identified an lcp orthologue in a Gram-negative species (Solimonas fluminis). We cloned and heterologously expressed the lcp gene of S. fluminis HR-BB, purified the corresponding Lcp protein (Lcp_HR-BB) from recombinant Escherichia coli, and biochemically characterised the Lcp_HR-BB activity. Lcp_HR-BB cleaved polyisoprene to a mixture of C₂₀ and higher oligoisoprenoids at a specific activity of 1.5 U/mg. Furthermore, spectroscopic investigation identified Lcp_HR-BB as a b-haem-containing protein with an oxidised, fivefold coordinated (open) haem centre. To the best of our knowledge, this is the first report that Gram-negative bacteria can have an active rubber oxygenase of the Lcp type.

Identification of LcpRBA3(2), a novel regulator of lcp expression in Streptomyces coelicolor A3(2)

Streptomyces coelicolor A3(2) is a rubber-degrading actinomycete that harbors one gene coding for a latex clearing protein (lcp_A3(2)). Within the genome of S. coelicolor A3(2), we identified a gene coding for a novel protein of the TetR family (LcpRB_A3(2)) downstream of lcp_A3(2) and demonstrated its binding upstream of lcp_A3(2). This indicates a role of LcpRB_A3(2) in the regulation of lcp expression. LcpRB_A3(2) shows no homology to LcpR_VH2, a putative regulator of lcp expression in Gordonia polyisoprenivorans VH2. Additionally, LcpR_VH2 homologs did not occur in the genome of S. coelicolor A3(2). Reverse transcriptase (RT) experiments showed that the expression of lcp_A3(2) and lcpRB_A3(2) is induced with poly(cis-1,4-isoprene) as sole carbon source. For further experiments, we heterologously expressed lcpRB_A3(2) in Escherichia coli, purified the protein, and subsequently verified a binding of LcpRB_A3(2) upstream of lcp_A3(2). The operator site was examined by a DNase I footprinting assay: it comprises 31 bp and exhibits an inverted repeat of nine bases for the putative binding region. Interestingly, two N-terminal DNA-binding HTH domains of the TetR-type (PF00440) were identified within the sequence of LcpRB_A3(2). The native molecular weight of LcpRB_A3(2) was determined as 44 kDa by size exclusion chromatography which correlates to the molecular weight of a monomer. Normally, proteins of the TetR family occur as dimers so that the monomeric state is a novelty. Furthermore, LcpRB_A3(2) homologs were identified in silico in several Lcp-containing actinomycetes, suspecting a conserved regulation mechanism. Apparently, the expression of lcps is regulated either by an LcpRB or by an LcpR.

Complete genome sequence of natural rubber-degrading, gram-negative bacterium, Rhizobacter gummiphilus strain NS21T

•

The genome sequence of rubber-degrading Rhizobacter gummiphilus NS21^T was determined.

•

An alternative rubber-degrading gene (latA2) was identified.

•

β-oxidation pathway genes which is involved in the rubber degradation were predicted.

Gram-negative natural rubber-degrader, Rhizobacter gummiphilus NS21^T, which was isolated from soil in the botanical garden in Japan, is a newly proposed species of genus of Rhizobacter. It has been reported that the latA1 gene is involved in the natural rubber degradation in this strain. To gain novel insights into natural rubber degradation pathway, the complete genome sequence of this strain was determined. The genome of strain NS21^T consists of 6,398,096 bp of circular chromosome (GenBank accession number CP015118.1) with G + C content of 69.72%. The genome contains 5687 protein-coding and 68 RNA genes. Among the predicted genes, 4810 genes were categorized as functional COGs. Homology search revealed that existence of latA1 homologous gene (latA2) in this genome. Quantitative reverse-transcription-PCR and deletion analyses indicated that natural rubber degradation of this strain requires latA2 as well as latA1.

LcpRVH2 - regulating the expression of latex-clearing proteins in Gordonia polyisoprenivorans VH2

Gordonia polyisoprenivorans VH2 harbours two latex clearing proteins, which are responsible for the cleavage of poly(cis-1,4-isoprene) into oligoisoprenes, thereby allowing growth in presence of, e.g. natural rubber. A gene coding for a putative regulator of the TetR-family (lcpRVH2) is located 131 bp upstream of lcp1VH2. We heterologously expressed lcpRVH2 in Escherichia coli, and purified and characterized the protein with respect to its ability to bind to the operator region of lcp1VH2. LcpRVH2 forms a dimer in its native state. The size of the dimer was determined to be 52.7 kDa by size exclusion chromatography, whereas the calculated size of a monomer was 24.1 kDa. Electrophoretic mobility shift assays (EMSAs) with the purified protein revealed a shift upon binding to the intergenic region between lcpRVH2 and lcp1VH2. Within this region, an inverted repeat was identified in silico, probably being the binding site of LcpRVH2. This binding sequence was confirmed by a DNase I footprinting assay. A shift also occurred in EMSAs with this 44 bp sequence only. Interestingly, no regulator was detected upstream of the second lcp (lcp2VH2). Therefore, we performed EMSA studies with LcpRVH2 and the putative operator region upstream of lcp2VH2, and discovered by DNase I footprinting another binding sequence upstream of lcp2VH2. Hence, we concluded that LcpRVH2 binds the operator region of both lcps and, most likely, regulates their expression in G. polyisoprenivorans VH2.

Rubber oxygenases

Natural rubber (NR), poly(cis-1,4-isoprene), is used in an industrial scale for more than 100 years. Most of the NR-derived materials are released to the environment as waste or by abrasion of small particles from our tires. Furthermore, compounds with isoprene units in their molecular structures are part of many biomolecules such as terpenoids and carotenoids. Therefore, it is not surprising that NR-degrading bacteria are widespread in nature. NR has one carbon-carbon double bond per isoprene unit and this functional group is the primary target of NR-cleaving enzymes, so-called rubber oxygenases. Rubber oxygenases are secreted by rubber-degrading bacteria to initiate the break-down of the polymer and to use the generated cleavage products as a carbon source. Three main types of rubber oxygenases have been described so far. One is rubber oxygenase RoxA that was first isolated from Xanthomonas sp. 35Y but was later also identified in other Gram-negative rubber-degrading species. The second type of rubber oxygenase is the latex clearing protein (Lcp) that has been regularly found in Gram-positive rubber degraders. Recently, a third type of rubber oxygenase (RoxB) with distant relationship to RoxAs was identified in Gram-negative bacteria. All rubber oxygenases described so far are haem-containing enzymes and oxidatively cleave polyisoprene to low molecular weight oligoisoprenoids with terminal CHO and CO-CH3 functions between a variable number of intact isoprene units, depending on the type of rubber oxygenase. This contribution summarises the properties of RoxAs, RoxBs and Lcps.

Rhizobacter gummiphilus NS21 has two rubber oxygenases (RoxA and RoxB) acting synergistically in rubber utilisation

Biodegradation of poly(cis-1,4-isoprene) (rubber) by Gram-negative bacteria has been investigated on the enzymatic level only in Steroidobacter cummioxidans 35Y (previously Xanthomonas sp. 35Y). This species produces two kinds of rubber oxygenases, RoxA_35Y and RoxB_35Y, one of which (RoxB_35Y) cleaves polyisoprene to a mixture of C₂₀- and higher oligoisoprenoids while the other (RoxA_35Y) cleaves polyisoprene and RoxB_35Y-derived oligoisoprenoids to the C₁₅-oligoisoprenoid 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD). ODTD can be taken up by S. cummioxidans and used as a carbon source. Gram-positive rubber-degrading bacteria employ another type of rubber oxygenase, latex clearing protein (Lcp), for the initial oxidative attack of the polyisoprene molecule. In this contribution, we examined which type of rubber oxygenase is present in the only other well-documented Gram-negative rubber-degrading species, Rhizobacter gummiphilus NS21. No homologue for an Lcp protein but homologues for a putative RoxA and a RoxB protein (the latter identical to a previously postulated LatA-denominated rubber cleaving enzyme) were identified in the genome of strain NS21. The roxA_NS21 and roxB_NS21 genes were separately expressed in a ∆roxA_35Y/∆roxB_35Y background of S. cummioxidans 35Y and restored the ability of the mutant to produce oligoisoprenoids. The RoxA_NS21 and RoxB_NS21 proteins were each purified and biochemically characterised. The results-in combination with in silico analysis of databases-indicate that Gram-negative rubber-degrading bacteria generally utilise two synergistically acting rubber oxygenases (RoxA/RoxB) for efficient cleavage of polyisoprene to ODTD.

Metabolic and taxonomic insights into the Gram-negative natural rubber degrading bacterium Steroidobacter cummioxidans sp. nov., strain 35Y

The pathway of rubber (poly [cis-1,4-isoprene]) catabolism is well documented for Gram-positive rubber degraders but only little information exists for Gram-negative species. The first documented potent rubber degrading Gram-negative strain is Xanthomonas sp. strain 35Y that uses extracellular rubber oxygenases for the initial cleavage of the polyisoprene molecule. However, neither the exact phylogenetic position of Xanthomonas sp. strain 35Y nor the catabolic pathway of the primary polyisoprene cleavage products have been investigated. In this contribution, we started to address both these issues by a comprehensive taxonomic characterization and by the analysis of the draft genome sequence of strain 35Y. Evaluation of the 16S rRNA gene sequence pointed to a borderline taxonomic position of strain 35Y as a novel species of the genus Steroidobacter. Further, substantial differences in the genotypic properties of strain 35Y and the members of the genus Steroidobacter, including average nucleotide identity (ANI) and in silico DNA-DNA hybridization (DDH), resolved the taxonomic position of strain 35Y and suggested its positioning as a novel species of the genus Steroidobacter. This was further confirmed by comparative analysis of physiological and biochemical features of strain 35Y with other members of the genus Steroidobacter. Thus, we conclude that strain 35Y represents a novel species of the genus Steroidobacter, for which we propose the designation Steroidobacter cummioxidans sp. nov., strain 35YT. A comprehensive analysis of the draft genome of S. cummioxidans strain 35Y revealed similarities but also substantial differences to rubber degrading Gram-positive counterparts. In particular, the putative transporters for the uptake of polyisoprene cleavage products differ from Gram-positive rubber degrading species. The draft genome sequence of S. cummioxidans strain 35Y will be useful for researchers to experimentally verify the predicted similarities and differences in the pathways of polyisoprene catabolism in Gram-positive and Gram-negative rubber degrading species.

In vitro studies on the degradation of poly(cis-1,4-isoprene)

Cleavage of the backbone of poly(cis-1,4-isoprene) (IR) in solid rubber material was accomplished by the addition of partially purified latex clearing protein (Lcp1_VH2 ) using a 200-mL enzyme reactor. Two strategies for the addition of Lcp1_VH2 were studied revealing that the daily addition of 50 µg mL^-1 of Lcp1_VH2 for 5 days was clearly a more efficient regime in comparison to a one-time addition of 250 µg of Lcp1_VH2 at the beginning. Soluble oligo(cis-1,4-isoprene) molecules occurred as degradation products and were identified by ESI-MS and GPC. Oxygenase activity of Lcp1_VH2 with solid IR particles as substrate was shown for the first time by measuring the oxygen consumption in the reaction medium. A strong decrease of the dissolved oxygen concentration was detected at the end of the assay, which indicates an increase in the number of cleavage reactions. The oligo(cis-1,4-isoprene) molecules comprised 1 to 11 isoprene units and exhibited an average molecular weight (M_n ) of 885 g mol^-1 . Isolation of the oligo(cis-1,4-isoprene) molecules was achieved by using silica gel column chromatography. The relative quantification of the isolated products was performed by HPLC-MS after derivatization with 2,4-dinitrophenilhydrazyne yielding a concentration of total degradation products of 1.62 g L^-1 . Analysis of the polymer surface in samples incubated for 3 days with Lcp1_VH2 via ATR-FTIR indicated the presence of carbonyl groups, which occurred upon the cleavage reaction. This study presents a cell-free bioprocess as an alternative rubber treatment that can be applied for the partial degradation of the polymer. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:890-899, 2018.

Cleavage of poly(cis-1,4-isoprene) rubber as solid substrate by cultures of Gordonia polyisoprenivorans

Potential biotechnological recycling processes for rubber products include the bacterial degradation of poly(cis-1,4-isoprene) (IR) in order to achieve its total biodegradation or its biotransformation into useful products. The actinomycete Gordonia polyisoprenivorans strain VH2 catalyzes the degradation of IR and enables its use as a sole carbon source via β-oxidation. The initial cleavage reaction is catalyzed by the extracellular latex clearing protein (Lcp). This dioxygenase is the key enzyme for the formation of oligo(cis-1,4-isoprene) molecules with different lengths, i.e., numbers of isoprene units. For the first time, IR was used as a solid substrate in 2-l fermenters. Two different particle size fractions (63-500 and 500-1000 μm) and three stirring rates (300, 400 and 500 rpm) were evaluated in the process. An increase of the cell concentration was achieved by using smaller particles and by using lower stirring rates, reaching a final biomass concentration of 0.52 g l^-1 at 300 rpm after 12 days of cultivation. In order to enhance the formation of oligo(cis-1,4-isoprene) molecules, a transposon insertion mutant (TH5) of G. polyisoprenivorans strain VH2 that has lost the ability to transport the partial degradation products into the cells was used, thereby allowing the accumulation of the degradation products in the culture supernatants. Propionate, glucose and glycerol were evaluated as additional carbon sources besides IR, and the highest yields were observed on propionate. In 2-l bioreactors with pH control, different feeding regimes were performed during cultivation by the addition of propionate every 24 or 48 h for 16 days. After liquid-liquid extraction and a derivatization with Girard's T reagent, the oligo(cis-1,4-isoprene) molecules were detected by ESI-MS. The mass distribution of the degradation products was affected by the selection of the extraction solvent, but no influence of longer cultivation periods was detected.

Production of functionalized oligo-isoprenoids by enzymatic cleavage of rubber

In this study, we show the proof of concept for the production of defined oligo-isoprenoids with terminal functional groups that can be used as starting materials for various purposes including the synthesis of isoprenoid-based plastics. To this end, we used three types of rubber oxygenases for the enzymatic cleavage of rubber [poly(cis-1,4-isoprene)]. Two enzymes, rubber oxygenase RoxAXsp and rubber oxygenase RoxBXsp , originate from Xanthomonas sp. 35Y; the third rubber oxygenase, latex-clearing protein (LcpK30 ), is derived from Gram-positive rubber degraders such as Streptomyces sp. K30. Emulsions of polyisoprene (latex) were treated with RoxAXsp , RoxBXsp , LcpK30 or with combinations of the three proteins. The cleavage products were purified by solvent extraction and FPLC separation. All products had the same general structure with terminal functions (CHO-CH2 - and -CH2 -COCH3 ) but differed in the number of intact isoprene units in between. The composition and m/z values of oligo-isoprenoid products were determined by HPLC-MS analysis. Our results provide a method for the preparation of reactive oligo-isoprenoids that can likely be used to convert polyisoprene latex or rubber waste materials into value-added molecules, biofuels, polyurethanes or other polymers.

Oligo(cis-1,4-isoprene) aldehyde-oxidizing dehydrogenases of the rubber-degrading bacterium Gordonia polyisoprenivorans VH2

The actinomycete Gordonia polyisoprenivorans strain VH2 is well-known for its ability to efficiently degrade and catabolize natural rubber [poly(cis-1,4-isoprene)]. Recently, a pathway for the catabolism of rubber by strain VH2 was postulated based on genomic data and the analysis of mutants (Hiessl et al. in Appl Environ Microbiol 78:2874-2887, 2012). To further elucidate the degradation pathway of poly(cis-1,4-isoprene), 2-dimensional-polyacrylamide gel electrophoresis was performed. The analysis of the identified protein spots by matrix-assisted laser desorption/ionization-time of flight tandem mass spectrometry confirmed the postulated intracellular pathway suggesting a degradation of rubber via β-oxidation. In addition, other valuable information on rubber catabolism of G. polyisoprenivorans strain VH2 (e.g. oxidative stress response) was provided. Identified proteins, which were more abundant in cells grown with rubber than in cells grown with propionate, implied a putative long-chain acyl-CoA-dehydrogenase, a 3-ketoacyl-CoA-thiolase, and an aldehyde dehydrogenase. The amino acid sequence of the latter showed a high similarity towards geranial dehydrogenases. The expression of the corresponding gene was upregulated > 10-fold under poly(cis-1,4-isoprene)-degrading conditions. The putative geranial dehydrogenase and a homolog were purified and used for enzyme assays. Deletion mutants for five aldehyde dehydrogenases were generated, and growth with poly(cis-1,4-isoprene) was investigated. While none of the mutants had an altered phenotype regarding growth with poly(cis-1,4-isoprene) as sole carbon and energy source, purified aldehyde dehydrogenases were able to catalyze the oxidation of oligoisoprene aldehydes indicating an involvement in rubber degradation.

Identification of three homologous latex-clearing protein (lcp) genes from the genome of Streptomyces sp. strain CFMR 7

Rubber materials have greatly contributed to human civilization. However, being a polymeric material does not decompose easily, it has caused huge environmental problems. On the other hand, only few bacteria are known to degrade rubber, with studies pertaining them being intensively focusing on the mechanism involved in microbial rubber degradation. The Streptomyces sp. strain CFMR 7, which was previously confirmed to possess rubber-degrading ability, was subjected to whole genome sequencing using the single molecule sequencing technology of the PacBio® RS II system. The genome was further analyzed and compared with previously reported rubber-degrading bacteria in order to identify the potential genes involved in rubber degradation. This led to the interesting discovery of three homologues of latex-clearing protein (Lcp) on the chromosome of this strain, which are probably responsible for rubber degrading activities. Genes encoding oxidoreductase α-subunit (oxiA) and oxidoreductase β-subunit (oxiB) were also found downstream of two lcp genes which are located adjacent to each other. In silico analysis reveals genes that have been identified to be involved in the microbial degradation of rubber in the Streptomyces sp. strain CFMR 7. This is the first whole genome sequence of a clear-zone-forming natural rubber- degrading Streptomyces sp., which harbours three Lcp homologous genes with the presence of oxiA and oxiB genes compared to the previously reported Gordonia polyisoprenivorans strain VH2 (with two Lcp homologous genes) and Nocardia nova SH22a (with only one Lcp gene).

Structural and Functional Analysis of Latex Clearing Protein (Lcp) Provides Insight into the Enzymatic Cleavage of Rubber

Latex clearing proteins (Lcps) are rubber oxygenases that catalyse the extracellular cleavage of poly (cis-1,4-isoprene) by Gram-positive rubber degrading bacteria. Lcp of Streptomyces sp. K30 (LcpK30) is a b-type cytochrome and acts as an endo-type dioxygenase producing C20 and higher oligo-isoprenoids that differ in the number of isoprene units but have the same terminal functions, CHO-CH2- and -CH2-COCH3. Our analysis of the LcpK30 structure revealed a 3/3 globin fold with additional domains at the N- and C-termini and similarities to globin-coupled sensor proteins. The haem group of LcpK30 is ligated to the polypeptide by a proximal histidine (His198) and by a lysine residue (Lys167) as the distal axial ligand. The comparison of LcpK30 structures in a closed and in an open state as well as spectroscopic and biochemical analysis of wild type and LcpK30 muteins provided insights into the action of the enzyme during catalysis.

RoxB Is a Novel Type of Rubber Oxygenase That Combines Properties of Rubber Oxygenase RoxA and Latex Clearing Protein (Lcp)

Only two types of rubber oxygenases, rubber oxygenase (RoxA) and latex clearing protein (Lcp), have been described so far. RoxA proteins (RoxAs) are c-type cytochromes of ≈70 kDa produced by Gram-negative rubber-degrading bacteria, and they cleave polyisoprene into 12-oxo-4,8-dimethyltrideca-4,8-diene-1-al (ODTD), a C15 oligo-isoprenoid, as the major end product. Lcps are common among Gram-positive rubber degraders and do not share amino acid sequence similarities with RoxAs. Furthermore, Lcps have much smaller molecular masses (≈40 kDa), are b-type cytochromes, and cleave polyisoprene to a mixture of C20, C25, C30, and higher oligo-isoprenoids as end products. In this article, we purified a new type of rubber oxygenase, RoxB Xsp (RoxB of Xanthomonas sp. strain 35Y). RoxB Xsp is distantly related to RoxAs and resembles RoxAs with respect to molecular mass (70.3 kDa for mature protein) and cofactor content (2 c-type hemes). However, RoxB Xsp differs from all currently known RoxAs in having a distinctive product spectrum of C20, C25, C30, and higher oligo-isoprenoids that has been observed only for Lcps so far. Purified RoxB Xsp revealed the highest specific activity of 4.5 U/mg (at 23°C) of all currently known rubber oxygenases and exerts a synergistic effect on the efficiency of polyisoprene cleavage by RoxA Xsp RoxB homologs were identified in several other Gram-negative rubber-degrading species, pointing to a prominent function of RoxB for the biodegradation of rubber in Gram-negative bacteria.IMPORTANCE The enzymatic cleavage of rubber (polyisoprene) is of high environmental importance given that enormous amounts of rubber waste materials are permanently released (e.g., by abrasion of tires). Research from the last decade has discovered rubber oxygenase A, RoxA, and latex clearing protein (Lcp) as being responsible for the primary enzymatic attack on the hydrophobic and water-insoluble biopolymer poly(cis-1,4-isoprene) in Gram-negative and Gram-positive rubber-degrading bacteria, respectively. Here, we provide evidence that a third type of rubber oxygenase is present in Gram-negative rubber-degrading species. Due to its characteristics, we suggest the designation RoxB for the new type of rubber oxygenase. Bioinformatic analysis of genome sequences indicates the presence of roxB homologs in other Gram-negative rubber degraders.

Assays for the Detection of Rubber Oxygenase Activities

Microbial biodegradation of rubber relies on extracellular rubber oxygenases that catalyze the oxidative cleavage of the double bond of the polyisoprene backbone into oligo-isoprenoids. This protocol describes the determination of rubber oxygenase activities by an online measurement of molecular oxygen consumption via a non-invasive fluorescence-based assay. The produced oligo-isoprenoid cleavage products with terminal keto- and aldehyde-groups are identified qualitatively and quantitatively by HPLC. Our method allows for the characterization of homologue rubber oxygenases, and can likely be adapted to assay other oxygenases consuming dioxygen. Here we describe the determination of rubber oxygenase activities at the examples of the so far two known types of rubber oxygenases, namely rubber oxygenase A (RoxA) and latex clearing protein (Lcp).

Identification of natural rubber degradation gene in Rhizobacter gummiphilus NS21

A Gram-negative rubber-degrading bacterium, Rhizobacter gummiphilus NS21 grew and produced aldehyde metabolites on a deproteinized natural rubber (DPNR)-overlay agar medium forming a clearing zone. A transposon-insertion mutant, which had lost the ability to degrade DPNR, was isolated to identify the rubber degradation genes. Sequencing analysis indicated that the transposon was inserted into a putative oxygenase gene, latA. The deduced amino acid sequence of latA has 36% identity with that of roxA, which encodes a rubber oxygenase of Xanthomonas sp. strain 35Y. Phylogenetic analysis revealed that LatA constitutes a distinct group from RoxA. Heterologous expression in a Methylibium host and deletion analysis of latA indicated that the latA product is responsible for the depolymerization of DPNR. The quantitative reverse transcription-PCR analysis indicated that the transcription of latA is induced during the growth on DPNR. These results strongly suggest that latA is directly involved in the degradation of rubber in NS21.

Characterization and functional expression of a rubber degradation gene of a Nocardia degrader from a rubber-processing factory

A rubber-degrading bacterial consortium named H2DA was obtained from an enrichment culture with natural rubber latex and rubber-processing factory waste in Vietnam. Gel permeation chromatography analysis revealed that only the strain NVL3 degraded synthetic poly(cis-1,4-isoprene) into low-molecular-weight intermediates among the three strains found in the H2DA. The 16S-rRNA gene sequence of NVL3 showed the highest identity with that of Nocardia farcinica DSM 43665^T. NVL3 accumulated aldehyde intermediates from synthetic poly(cis-1,4-isoprene) on a rubber-overlay plate as indicated by Schiff's staining. NVL3 also degraded deproteinized natural rubber into low-molecular-weight aldehyde intermediates. A latex-clearing protein (lcp) gene ortholog was identified within the genome sequence of NVL3, and it showed a moderate amino-acid identity (54-75%) with the lcp genes from previously reported rubber degraders. The heterologous expression of the NVL3 lcp in Escherichia coli BL21(DE3) allowed us to purify the 46.8-kDa His-tagged lcp gene product (His-Lcp). His-Lcp degraded synthetic poly(cis-1,4-isoprene) and accumulated aldehyde intermediates from deproteinized natural rubber suggesting the functional expression of the lcp gene from a Nocardia degrader in E. coli. Quantitative reverse transcription PCR analysis indicated the strong transcriptional induction of the lcp gene in NVL3 in the presence of synthetic poly(cis-1,4-isoprene). These results suggest the involvement of the lcp gene in rubber degradation in NVL3.

A simple, rapid and cost-effective process for production of latex clearing protein to produce oligopolyisoprene molecules

Aiming at finding feasible alternatives for rubber waste disposal, the partial enzymatic degradation of poly(cis-1,4-isoprene)-containing materials represents a potential solution. The use of rubber-degrading enzymes and the biotransformation of rubber into new materials is limited by the high costs associated with the production and purification of the enzyme and the complexity of the process. This study presents a simple and low-cost procedure to obtain purified latex clearing protein (Lcp), an enzyme capable of cleaving the double bonds of poly(cis-1,4-isoprene) in presence of oxygen to produce different size of oligomers with terminal aldehyde and ketone groups, respectively. The gene coding for Lcp1_VH2 from Gordonia polyisoprenivorans strain VH2 was overexpressed in Escherichia coli C41 (DE3), and by using an auto-induction medium high protein yields were obtained. The cultivation process was described and compared with an IPTG-inducible medium previously used. Purification of the enzyme was performed using salting out precipitation with ammonium sulfate. Different salt concentrations and pH were tested in order to find the optimal for purification, obtaining a concentration of 60mg Lcp per l. The enzymatic activity of the purified enzyme was measured by an oxygen consumption assay in the presence of polyisoprene latex. Volumetric activities of 0.16Uml^-1 were obtained at optimal conditions of temperature and pH. The results showed an active and partial purified fraction of Lcp1_VH2, able to cleave the backbone of poly(cis-1,4-isoprene) and to produce degradation products that were identified with staining methodologies (Schiff reagent for aldehyde groups and 2,4-DNPH for carbonyl groups) and characterized using nuclear magnetic resonance (NMR). Thirteen different storage conditions were tested for the purified enzyme analyzing the enzymatic activity after 1 and 3 months. Lcp1_VH2, as an ammonium sulfate precipitate, was stable, easy to handle and sufficiently active for further analysis. The described methodology offers the possibility to upscale the process and to produce large amounts of this protein.

Cleavage of Rubber by the Latex Clearing Protein (Lcp) of Streptomyces sp. Strain K30: Molecular Insights

Gram-positive rubber degraders such as Streptomyces sp. strain K30 cleave rubber [poly(cis-1,4-isoprene)] to low-molecular-mass oligoisoprenoid products with terminal keto and aldehyde groups by the secretion of a latex clearing protein (Lcp) designated rubber oxygenase. Lcp_K30 is a heme b cytochrome and has a domain of unknown function (DUF2236) that is characteristic of orthologous Lcps. Proteins with a DUF2236 domain are characterized by three highly conserved residues (R164, T168, and H198 in Lcp_K30). Exchange of R164 or T168 by alanine and characterization of the purified Lcp_K30 muteins revealed that both were stable and contained a heme group (red color) but were inactive. This finding identifies both residues as key residues for the cleavage reaction. The purified H198A mutein was also inactive and stable but was colorless due to the absence of heme. We constructed and characterized alanine muteins of four additional histidine residues moderately conserved in 495 Lcp_K30 homologous sequences (H203A, H232A, H259A, H266A). All muteins revealed wild-type properties, excluding any importance for activity and/or heme coordination. Since Lcp_K30 has only eight histidines and the three remaining residues (H103, H184, and H296) were not conserved (<11%), H198 presumably is the only essential histidine, indicating its putative function as a heme ligand. The second axial position of the heme is likely occupied by a not yet identified molecule. Mutational analysis of three strictly conserved arginine residues (R195, R202, R328) showed that R195A and R202A muteins were colorless and instable, suggesting that these residues are important for the protein stability.

IMPORTANCE

Large amounts of rubber waste materials have been permanently released into the environment for more than a century, yet accumulation of rubber particles released, e.g., by abrasion of tires along highways has not been observed. This is indicative of the ubiquitous presence and activity of rubber-degrading microorganisms. Despite increasing research activities on rubber biodegradation during the last 2 decades, the knowledge of the enzymatic cleavage mechanism of rubber by latex clearing protein (Lcp) still is limited. In particular, the catalytic cleavage mechanism and the amino acids of Lcp proteins (Lcps) that are involved have not yet been identified for any Lcp. In this study, we investigated the importance of 10 amino acid residues of Lcp from Streptomyces sp. K30 (Lcp_K30) by mutagenesis, mutein purification, and biochemical characterization. We identified several essential residues, one of which most likely represents an axial heme ligand in Lcp of Streptomyces sp. K30.

Biochemical and spectroscopic characterization of purified Latex Clearing Protein (Lcp) from newly isolated rubber degrading Rhodococcus rhodochrous strain RPK1 reveals novel properties of Lcp

Background

Biodegradation of rubber (polyisoprene) is initiated by oxidative cleavage of the polyisoprene backbone and is performed either by an extracellular rubber oxygenase (RoxA) from Gram-negative rubber degrading bacteria or by a latex clearing protein (Lcp) secreted by Gram-positive rubber degrading bacteria. Only little is known on the biochemistry of polyisoprene cleavage by Lcp and on the types and functions of the involved cofactors.

Results

A rubber-degrading bacterium was isolated from the effluent of a rubber-processing factory and was taxonomically identified as a Rhodococcus rhodochrous species. A gene of R. rhodochrous RPK1 that coded for a polyisoprene-cleaving latex clearing protein (lcp_Rr) was identified, cloned, expressed in Escherichia coli and purified. Purified Lcp_Rr had a specific activity of 3.1 U/mg at 30 °C and degraded poly(1,4-cis-isoprene) to a mixture of oligoisoprene molecules with terminal keto and aldehyde groups. The pH optimum of Lcp_Rr was higher (pH 8) than for other rubber-cleaving enzymes (≈ pH 7). UVvis spectroscopic analysis of Lcp_Rr revealed a cytochrome-specific absorption spectrum with an additional feature at long wavelengths that has not been observed for any other rubber-cleaving enzyme. The presence of one b-type haem in Lcp_Rr as a co-factor was confirmed by (i) metal analysis, (ii) solvent extraction, (iii) bipyridyl assay and (iv) detection of haem-b specific m/z values via mass-spectrometry.

Conclusions

Our data point to substantial differences in the active sites of Lcp proteins obtained from different rubber degrading bacteria.

Electronic supplementary material

The online version of this article (doi:10.1186/s12866-016-0703-x) contains supplementary material, which is available to authorized users.