Purification and characterization of a nylon-degrading enzyme

Myco-remediation of plastic pollution: current knowledge and future prospects

To date, enumerable fungi have been reported to participate in the biodegradation of several notorious plastic materials following their isolation from soil of plastic-dumping sites, marine water, waste of mulch films, landfills, plant parts and gut of wax moth. The general mechanism begins with formation of hydrophobin and biofilm proceding to secretion of specific plastic degarding enzymes (peroxidase, hydrolase, protease and urease), penetration of three dimensional substrates and mineralization of plastic polymers into harmless products. As a result, several synthetic polymers including polyethylene, polystyrene, polypropylene, polyvinyl chloride, polyurethane and/or bio-degradable plastics have been validated to deteriorate within months through the action of a wide variety of fungal strains predominantly Ascomycota (Alternaria, Aspergillus, Cladosporium, Fusarium, Penicillium spp.). Understanding the potential and mode of operation of these organisms is thus of prime importance inspiring us to furnish an up to date view on all the presently known fungal strains claimed to mitigate the plastic waste problem. Future research henceforth needs to be directed towards metagenomic approach to distinguish polymer degrading microbial diversity followed by bio-augmentation to build fascinating future of waste disposal.

Opportunities and challenges for plastic depolymerization by biomimetic catalysis

Plastic waste has imposed significant burdens on the environment. Chemical recycling allows for repeated regeneration of plastics without deterioration in quality, but often requires harsh reaction conditions, thus being environmentally unfriendly. Enzymatic catalysis offers a promising solution for recycling under mild conditions, but it faces inherent limitations such as poor stability, high cost, and narrow substrate applicability. Biomimetic catalysis may provide a new avenue by combining high enzyme-like activity with the stability of inorganic materials. Biomimetic catalysis has demonstrated great potential in biomass conversion and has recently shown promising progress in plastic degradation. This perspective discusses biomimetic catalysis for plastic degradation from two perspectives: the imitation of the active centers and the imitation of the substrate-binding clefts. Given the chemical similarity between biomass and plastics, relevant work is also included in the discussion to draw inspiration. We conclude this perspective by highlighting the challenges and opportunities in achieving sustainable plastic recycling via a biomimetic approach.

Recycling and Degradation of Polyamides

As one of the five major engineering plastics, polyamide brings many benefits to humans in the fields of transportation, clothing, entertainment, health, and more. However, as the production of polyamide increases year by year, the pollution problems it causes are becoming increasingly severe. This article reviews the current recycling and treatment processes of polyamide, such as chemical, mechanical, and energy recovery, and degradation methods such as thermal oxidation, photooxidation, enzyme degradation, etc. Starting from the synthesis mechanism of polyamide, it discusses the advantages and disadvantages of different treatment methods of polyamide to obtain more environmentally friendly and economical treatment schemes. Finding enzymes that can degrade high-molecular-weight polyamides, exploring the recovery of polyamides under mild conditions, synthesizing environmentally degradable polyamides through copolymerization or molecular design, and finally preparing degradable bio-based polyamides may be the destination of polyamide.

Caatinga, Amazon and Atlantic Forest as natural sources for microbial lignocellulolytic enzymes

Brazilian biomes are important sources for environmental microorganisms, including efficient metabolic machineries, like actinomycetes. These bacteria are known for their abilities to produce many bioactive compounds, including enzymes with multiple industrial applications. The present work aimed to evaluate lignocellulolytic abilities of actinomycetes isolated from soil and rhizosphere samples collected at Caatinga, Atlantic and Amazon Forest. Laccase (Lac), lignin peroxidase (LiP), manganese peroxidase (MnP) and cellulase were evaluated for their efficiency. These enzymes have an essential role in lignin decomposition, through oxidation of phenolic and non-phenolic compounds, as well as enzymatic hydrolysis of vegetal biomass. In this sense, a total of 173 actinomycetes were investigated. Eleven (11) of them were selected by their enzymatic performance. The actinomycete AC166 displayed some activity in all analysed scenarios in terms of Lac, MnP and LiP activity, while AC171 was selected as the most promising strain, showing the following activities: 29.7 U.L-1 for Lac; 2.5 U.L-1 for LiP and 23 U.L-1 for MnP. Cellulolytic activities were evaluated at two pH conditions, 4.8 and 7.4, obtaining the following results: 25 U.L-1 and 71 U.L-1, respectively. Thermostability (4, 30 and 60 o C) and salinity concentrations (0 to 4 M) and pH variation (2.0 to 9.0) stabilities of the obtained LiP and Lac enzymatic extracts were also verified. The actinomycete strain AC171 displayed an adaptable response in distinct pH and salt profiles, indicating that bacterial LiP was some halophilic type. Additionally, the strain AC149 produced an alkali and extreme halophilic lignin peroxidase, which are promising profiles for their future application under lignocellulosic biomass at bioethanol biorefineries.

Natural diversity screening, assay development, and characterization of nylon-6 enzymatic depolymerization

Successes in biocatalytic polyester recycling have raised the possibility of deconstructing alternative polymers enzymatically, with polyamide (PA) being a logical target due to the array of amide-cleaving enzymes present in nature. Here, we screen 40 potential natural and engineered nylon-hydrolyzing enzymes (nylonases), using mass spectrometry to quantify eight compounds resulting from enzymatic nylon-6 (PA6) hydrolysis. Comparative time-course reactions incubated at 40-70 °C showcase enzyme-dependent variations in product distributions and extent of PA6 film depolymerization, with significant nylon deconstruction activity appearing rare. The most active nylonase, a NylCK variant we rationally thermostabilized (an N-terminal nucleophile (Ntn) hydrolase, NylCK-TS, Tm = 87.4 °C, 16.4 °C higher than the wild-type), hydrolyzes 0.67 wt% of a PA6 film. Reactions fail to restart after fresh enzyme addition, indicating that substrate-based limitations, such as restricted enzyme access to hydrolysable bonds, prohibit more extensive deconstruction. Overall, this study expands our understanding of nylonase activity distribution, indicates that Ntn hydrolases may have the greatest potential for further development, and identifies key targets for progressing PA6 enzymatic depolymerization, including improving enzyme activity, product selectivity, and enhancing polymer accessibility.

Micro crystalline cellulose aided surface modification and deposition of green polyelectrolytes for the improved hydrophilicity and flame retardancy of polyamide 66 fabric

In this work, microcrystalline cellulose (MCC) treated polyamide 66 (PA66) textiles were coated with green and naturally abundant polysaccharides specifically, chitosan (CS) and sodium alginate (SA) together with phytic acid (PA) via layer by layer (LbL) deposition. The prime focus of such treatment was to intensify both the hydrophilic and flame retardant properties of PA66 fabric substrates. Subsequently, the prepared coatings were further subjected to cross-linking modification by dipping them into the barium (Ba) salt solution. Obtained results indicated that the MCC-modified PA66 exhibited a water contact angle (WCA) value of 00 and revealed a drop in peak heat release rate (pHRR) up to 31 % with complete suppression of melt-dripping. Meanwhile, the Ba-ion-induced cross-linking treatment further escalated this reduction up to 36 % by adding enhanced thermal stability, improved char quality along better wash durability of as prepared coatings. In addition, the combined modification of PA66 textiles with MCC and Ba-ion handed a superb enhancement of physical properties like tensile strength by ca. 50 % compared to the pure PA66. Thus, this MCC-assisted surface modification paves the way for a new kind of greener treatment of PA66 textiles in attaining superior hydrophilic and flame retardant properties of the same.

Degradation and lifetime prediction of plastics in subsea and offshore infrastructures

Engineering and civil developments have relied on synthetic polymers and plastics (including polyethylene, polypropylene, polyamide, etc.) for decades, especially where their durability protects engineering structures against corrosion and other environmental stimuli. Offshore oil and gas infrastructure and renewable energy platforms are typical examples, where these plastics (100,000 s of metric tonnes worldwide) are used primarily as functional material to protect metallic flowlines and subsea equipment against seawater corrosion. Despite this, the current literature on polymers is limited to sea-surface environments, and a model for subsea degradation of plastics is needed. In this review, we collate relevant studies on the degradation of plastics and synthetic polymers in marine environments to gain insight into the fate of these materials when left in subsea conditions. We present a new mathematical model that accounts for various physicochemical changes in the oceanic environment as a function of depth to predict the lifespan of synthetic plastics and the possible formation of plastic debris, e.g., microplastics. We found that the degradation rate of the plastics decreases significantly as a function of water depth and can be estimated quantitatively by the mathematical model that accounts for the effect (and sensitivity) of geographical location, temperature, light intensity, hydrostatic pressure, and marine sediments. For instance, it takes a subsea polyethylene coating about 800 years to degrade on ocean floor (as opposed to <400 years in shallow coastal waters), generating 1000s of particles per g of degradation under certain conditions. Our results demonstrate how suspended sediments in the water column are likely to compensate for the decreasing depth-corrected degradation rates, resulting in surface abrasion and the formation of plastic debris such as microplastics. This review, and the complementing data, will be significant for the environmental impact assessment of plastics in subsea infrastructures. Moreover, as these infrastructures reach the end of their service life, the management of the plastic components becomes of great interest to environmental regulators, industry, and the community, considering the known sizeable impacts of plastics on global biogeochemical cycles.

A metagenomic catalog for exploring the plastizymes landscape covering taxa, genes, and proteins

There are significant environmental and health concerns associated with the current inefficient plastic recycling process. This study presents the first integrated reference catalog of plastic-contaminated environments obtained using an insilico workflow that could play a significant role in discovering new plastizymes. Here, we combined 66 whole metagenomic data from plastic-contaminated environment samples from four previously collected metagenome data with our new sample. In this study, an integrated plastic-contaminated environment gene, protein, taxa, and plastic degrading enzyme catalog (PDEC) was constructed. These catalogs contain 53,300,583 non-redundant genes and proteins, 691 metagenome-assembled genomes, and 136,654 plastizymes. Based on KEGG and eggNOG annotations, 42% of recognized genes lack annotations, indicating their functions remain elusive and warrant further investigation. Additionally, the PDEC catalog highlights hydrolases, peroxidases, and cutinases as the prevailing plastizymes. Ultimately, following multiple validation procedures, our effort focused on pinpointing enzymes that exhibited the highest similarity to the introduced plastizymes in terms of both sequence and three-dimensional structural aspects. This encompassed evaluating the linear composition of constituent units as well as the complex spatial conformation of the molecule. The resulting catalog is expected to improve the resolution of future multi-omics studies, providing new insights into plastic-pollution related research.

Enzymes' Power for Plastics Degradation

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

Microbial Enzyme Biotechnology to Reach Plastic Waste Circularity: Current Status, Problems and Perspectives

The accumulation of synthetic plastic waste in the environment has become a global concern. Microbial enzymes (purified or as whole-cell biocatalysts) represent emerging biotechnological tools for waste circularity; they can depolymerize materials into reusable building blocks, but their contribution must be considered within the context of present waste management practices. This review reports on the prospective of biotechnological tools for plastic bio-recycling within the framework of plastic waste management in Europe. Available biotechnology tools can support polyethylene terephthalate (PET) recycling. However, PET represents only ≈7% of unrecycled plastic waste. Polyurethanes, the principal unrecycled waste fraction, together with other thermosets and more recalcitrant thermoplastics (e.g., polyolefins) are the next plausible target for enzyme-based depolymerization, even if this process is currently effective only on ideal polyester-based polymers. To extend the contribution of biotechnology to plastic circularity, optimization of collection and sorting systems should be considered to feed chemoenzymatic technologies for the treatment of more recalcitrant and mixed polymers. In addition, new bio-based technologies with a lower environmental impact in comparison with the present approaches should be developed to depolymerize (available or new) plastic materials, that should be designed for the required durability and for being susceptible to the action of enzymes.

Discovering untapped microbial communities through metagenomics for microplastic remediation: recent advances, challenges, and way forward

Microplastics (MPs) are ubiquitous pollutants persisting almost everywhere in the environment. With the increase in anthropogenic activities, MP accumulation is increasing enormously in aquatic, marine, and terrestrial ecosystems. Owing to the slow degradation of plastics, MPs show an increased biomagnification probability of persistent, bioaccumulative, and toxic substances thereby creating a threat to environmental biota. Thus, remediation of MP-pollutants requires efficient strategies to circumvent the mobilization of contaminants leaching into the water, soil, and ultimately to human beings. Over the years, several microorganisms have been characterized by the potential to degrade different plastic polymers through enzymatic actions. Metagenomics (MGs) is an effective way to discover novel microbial communities and access their functional genetics for the exploration and characterization of plastic-degrading microbial consortia and enzymes. MGs in combination with metatranscriptomics and metabolomics approaches are a powerful tool to identify and select remediation-efficient microbes in situ. Advancement in bioinformatics and sequencing tools allows rapid screening, mining, and prediction of genes that are capable of polymer degradation. This review comprehensively summarizes the growing threat of microplastics around the world and highlights the role of MGs and computational biology in building effective response strategies for MP remediation.

Immobilized enzyme/microorganism complexes for degradation of microplastics: A review of recent advances, feasibility and future prospects

Environmental prevalence of microplastics has prompted the development of novel methods for their removal, one of which involves immobilization of microplastics-degrading enzymes. Various materials including nanomaterials have been studied for this purpose but there is currently a lack of review to present these studies in an organized manner to highlight the advances and feasibility. This article reviewed more than 100 peer-reviewed scholarly papers to elucidate the latest advances in the novel application of immobilized enzyme/microorganism complexes for microplastics degradation, its feasibility and future prospects. This review shows that metal nanoparticle-enzyme complexes improve biodegradation of microplastics in most studies through creating photogenerated radicals to facilitate polymer oxidation, accelerating growth of bacterial consortia for biodegradation, anchoring enzymes and improving their stability, and absorbing water for hydrolysis. In a study, the antimicrobial property of nanoparticles retarded the growth of microorganisms, hence biodegradation. Carbon particle-enzyme complexes enable enzymes to be immobilized on carbon-based support or matrix through covalent bonding, adsorption, entrapment, encapsulation, and a combination of the mechanisms, facilitated by formation of cross-links between enzymes. These complexes were shown to improve microplastics-degrading efficiency and recyclability of enzymes. Other emerging nanoparticles and/or enzymatic technologies are fusion of enzymes with hydrophobins, polymer binding module, peptide and novel nanoparticles. Nonetheless, the enzymes in the complexes present a limiting factor due to limited understanding of the degradation mechanisms. Besides, there is a lack of studies on the degradation of polypropylene and polyvinyl chloride. Genetic bioengineering and metagenomics could provide breakthrough in this area. This review highlights the optimism of using immobilized enzymes/microorganisms to increase the efficiency of microplastics degradation but optimization of enzymatic or microbial activities and synthesis of immobilized enzymes/microorganisms are crucial to overcome the barriers to their wide application.

The metabolic potential of plastics as biotechnological carbon sources - Review and targets for the future

The plastic crisis requires drastic measures, especially for the plastics' end-of-life. Mixed plastic fractions are currently difficult to recycle, but microbial metabolism might open new pathways. With new technologies for degradation of plastics to oligo- and monomers, these carbon sources can be used in biotechnology for the upcycling of plastic waste to valuable products, such as bioplastics and biosurfactants. We briefly summarize well-known monomer degradation pathways and computed their theoretical yields for industrially interesting products. With this information in hand, we calculated replacement scenarios of existing fossil-based synthesis routes for the same products. Thereby, we highlight fossil-based products for which plastic monomers might be attractive alternative carbon sources. Notably, not the highest yield of product on substrate of the biochemical route, but rather the (in-)efficiency of the petrochemical routes (i.e., carbon, energy use) determines the potential of biochemical plastic upcycling. Our results might serve as a guide for future metabolic engineering efforts towards a sustainable plastic economy.

Jacques L, Bornscheuer UT, Syrén P. Biocatalysis in the Recycling Landscape for Synthetic Polymers and Plastics towards Circular Textiles

Although recovery of fibers from used textiles with retained material quality is desired, separation of individual components from polymer blends used in today's complex textile materials is currently not available at viable scale. Biotechnology could provide a solution to this pressing problem by enabling selective depolymerization of recyclable fibers of natural and synthetic origin, to isolate constituents or even recover monomers. We compiled experimental data for biocatalytic polymer degradation with a focus on synthetic polymers with hydrolysable links and calculated conversion rates to explore this path The analysis emphasizes that we urgently need major research efforts: beyond cellulose-based fibers, biotechnological-assisted depolymerization of plastics so far only works for polyethylene terephthalate, with degradation of a few other relevant synthetic polymer chains being reported. In contrast, by analyzing market data and emerging trends for synthetic fibers in the textile industry, in combination with numbers from used garment collection and sorting plants, it was shown that the use of difficult-to-recycle blended materials is rapidly growing. If the lack of recycling technology and production trend for fiber blends remains, a volume of more than 3400 Mt of waste will have been accumulated by 2030. This work highlights the urgent need to transform the textile industry from a biocatalytic perspective.

MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX-UP started January 2020

This article introduces the EU Horizon 2020 research project MIX-UP, "Mixed plastics biodegradation and upcycling using microbial communities". The project focuses on changing the traditional linear value chain of plastics to a sustainable, biodegradable based one. Plastic mixtures contain five of the top six fossil-based recalcitrant plastics [polyethylene (PE), polyurethane (PUR), polypropylene (PP), polyethylene terephthalate (PET), polystyrene (PS)], along with upcoming bioplastics polyhydroxyalkanoate (PHA) and polylactate (PLA) will be used as feedstock for microbial transformations. Consecutive controlled enzymatic and microbial degradation of mechanically pre-treated plastics wastes combined with subsequent microbial conversion to polymers and value-added chemicals by mixed cultures. Known plastic-degrading enzymes will be optimised by integrated protein engineering to achieve high specific binding capacities, stability, and catalytic efficacy towards a broad spectrum of plastic polymers under high salt and temperature conditions. Another focus lies in the search and isolation of novel enzymes active on recalcitrant polymers. MIX-UP will formulate enzyme cocktails tailored to specific waste streams and strives to enhance enzyme production significantly. In vivo and in vitro application of these cocktails enable stable, self-sustaining microbiomes to convert the released plastic monomers selectively into value-added products, key building blocks, and biomass. Any remaining material recalcitrant to the enzymatic activities will be recirculated into the process by physicochemical treatment. The Chinese-European MIX-UP consortium is multidisciplinary and industry-participating to address the market need for novel sustainable routes to valorise plastic waste streams. The project's new workflow realises a circular (bio)plastic economy and adds value to present poorly recycled plastic wastes where mechanical and chemical plastic recycling show limits.

Functional interplay between plastic polymers and microbes: a comprehensive review

Escalated production of plastic, their worldwide distribution and persistent nature finally results into their environmental accumulation causing severe threats to the ecological environment and biotic health. Thus, development of suitable measurements for environmental remediation of plastic may be an urgent issue in this plastic age. Some recent reviews have categorized the microbial species able to degrade different plastic polymers and the different factors effecting bio-degradation of plastic are poorly understood. This review comprehensively discusses bio-degradation of traditional and biodegradable plastic polymers both in natural and biological environment (gut microbes and fungi) to understand different factors regulating their degradation, and also shows how degradation of plastic polymers under abiotic factors influence subsequent biological degradation. Different physicochemical modifications like - breaking large polymers into small fragments by pre-treatment, functional groups enrichment, identifying potent microbial species (consortia) and engineering microbial enzymes might be crucial for bio-degradations of plastic. Effects of micro/nanoplastic and other chemical intermediates, formed during the bio-degradation of plastic, on species composition, abundance, growth, metabolism and enzymatic systems of microbes involved in the bio-degradation of plastic should be determined in future research.

From lignocellulose to plastics: Knowledge transfer on the degradation approaches by fungi

In this review, we argue that there is much to be learned by transferring knowledge from research on lignocellulose degradation to that on plastic. Plastic waste accumulates in the environment to hazardous levels, because it is inherently recalcitrant to biological degradation. Plants evolved lignocellulose to be resistant to degradation, but with time, fungi became capable of utilising it for their nutrition. Examples of how fungal strategies to degrade lignocellulose could be insightful for plastic degradation include how fungi overcome the hydrophobicity of lignin (e.g. production of hydrophobins) and crystallinity of cellulose (e.g. oxidative approaches). In parallel, knowledge of the methods for understanding lignocellulose degradation could be insightful such as advanced microscopy, genomic and post-genomic approaches (e.g. gene expression analysis). The known limitations of biological lignocellulose degradation, such as the necessity for physiochemical pretreatments for biofuel production, can be predictive of potential restrictions of biological plastic degradation. Taking lessons from lignocellulose degradation for plastic degradation is also important for biosafety as engineered plastic-degrading fungi could also have increased plant biomass degrading capabilities. Even though plastics are significantly different from lignocellulose because they lack hydrolysable C-C or C-O bonds and therefore have higher recalcitrance, there are apparent similarities, e.g. both types of compounds are mixtures of hydrophobic polymers with amorphous and crystalline regions, and both require hydrolases and oxidoreductases for their degradation. Thus, many lessons could be learned from fungal lignocellulose degradation.

Plastic biodegradation: Frontline microbes and their enzymes

Plastic polymers with different properties have been developed in the last 150 years to replace materials such as wood, glass and metals across various applications. Nevertheless, the distinct properties which make plastic desirable for our daily use also threaten our planet's sustainability. Plastics are resilient, non-reactive and most importantly, non-biodegradable. Hence, there has been an exponential increase in plastic waste generation, which has since been recognised as a global environmental threat. Plastic wastes have adversely affected life on earth, primarily through their undesirable accumulation in landfills, leaching into the soil, increased greenhouse gas emission, etc. Even more damaging is their impact on the aquatic ecosystems as they cause entanglement, ingestion and intestinal blockage in aquatic animals. Furthermore, plastics, especially in the microplastic form, have also been found to interfere with chemical interaction between marine organisms, to cause intrinsic toxicity by leaching, and by absorbing persistent organic contaminants as well as pathogens. The current methods for eliminating these wastes (incineration, landfilling, and recycling) come at massive costs, are unsustainable, and put more burden on our environment. Thus, recent focus has been placed more on the potential of biological systems to degrade synthetic plastics. In this regard, some insects, bacteria and fungi have been shown to ingest these polymers and convert them into environmentally friendly carbon compounds. Hence, in the light of recent literature, this review emphasises the multifaceted roles played by microorganisms in this process. The current understanding of the roles played by actinomycetes, algae, bacteria, fungi and their enzymes in enhancing the degradation of synthetic plastics are reviewed, with special focus on their modes of action and probable enzymatic mechanisms. Besides, key areas for further exploration, such as the manipulation of microorganisms through molecular cloning, modification of enzymatic characteristics and metabolic pathway design, are also highlighted.

The fate of plastic in the ocean environment - a minireview

The presence of plastics in the marine environment poses a threat to ocean life and has received much scientific and public attention in recent years. Plastics were introduced to the market in the 1950s and since then, global production figures and ocean plastic littering have increased exponentially. Of the 359 million tonnes (Mt) produced in 2018, an estimated 14.5 Mt has entered the ocean. In particular smaller plastic particles can be ingested by marine biota causing hazardous effects. Plastic marine debris (PMD) is exposed to physical, chemical and biological stressors. These cause macro and microplastic to break down into smaller fragments, including sub micrometre sized nanoplastic particles, which may account for an important but so far unevaluated fraction of the ocean plastic budget. Physicochemical and biological deterioration of PMD also leads to the release of more volatile compounds and the terminal oxidation of PMD, which most likely accounts for an important but also unevaluated fraction in the ocean plastic budget. This minireview provides an overview on (1) the quantity of plastic production and waste, pathways for plastics to enter the marine realm, the inventory of PMD and the negative effects of PMD to ocean life. (2) We discuss plastic degradation mechanisms in the ocean, expanding on the processes of photodegradation and biodegradation. (3) This review also highlights the emerging topic of nanoplastics in the sea and provides an overview on their specific physical and chemical properties, potential harm to ocean life, and nanoplastic detection techniques.

Anchor peptides promote degradation of mixed plastics for recycling

Resource stewardship and sustainable use of natural resources is mandatory for a circular plastic economy. The discovery of microbes and enzymes that can selectively degrade mixed-plastic waste enables to recycle plastics. Knowledge on how to achieve efficient and selective enzymatic plastic degradation is a key prerequisite for biocatalytic recycling of plastics. Wild-type natural polymer degrading enzymes such as cellulases pose often selective non-catalytic binding domains that facilitate a targeting and efficient degradation of polymeric substrates. Recently identified polyester hydrolases with synthetic polymer degrading activities, however, lack in general such selective domains. Inspired by nature, we herein report a protocol for the identification and engineering of anchor peptides which serve as non-catalytic binding domains specifically toward synthetic plastics. The identified anchor peptides hold the promise to be fused to known plastic degrading enzymes and thereby enhance the efficiency of biocatalytic plastic recycling processes.

Cultivation of filamentous fungi for attack on synthetic polymers via biological Fenton chemistry

Environmental pollution with synthetic polymers (commonly named plastics) nowadays poses serious threats to the environment and human health. Unfortunately, most conventional plastics are highly recalcitrant even under conditions known to be favorable for microbial degradation. Expanding the knowledge regarding opportunities and limitations of the microbial degradability of plastics would largely contribute to the development of adequate decontamination and management strategies for plastic pollution. This chapter provides cultivation approaches to be applied for the characterization of eco-physiologically diverse asco- and basidiomycete fungi with respect to their ability to attack solid and water-soluble synthetic polymers with the help of quinone redox cycling-based Fenton-type reactions, which result in the production of highly reactive hydroxyl radicals. These reactive oxygen species are the strongest oxidants known from biological systems. However, their potential employment by fungi dwelling in diverse habitats as a biodegradation tool to attack synthetic polymers is still insufficiently explored.

Structural and functional characterization of nylon hydrolases

Biodegradation of synthetic polymers is recognized as a useful way to reduce their environmental load and pollution, loss of natural resources, extensive energy consumption, and generation of greenhouse gases. The potential use of enzymes responsible for the degradation of the targeted polymers is an effective approach which enables the conversion of the used polymers to original monomers and/or other useful compounds. In addition, the enzymes are expected to be applicable in industrial processes such as improving the surface structures of the polymers. Especially, conversion of the solid polymers to soluble oligomers/monomers is a key step for the biodegradation of the polymers. Regarding the hydrolysis of polyamides, three enzymes, 6-aminohexanoate-cyclic-dimer hydrolase (NylA), 6-aminohexanoate-dimer hydrolase (NylB), and 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC), are found in several bacterial strains. In this chapter, we describe our approach for the screening of microorganisms which degrade nylons and related compounds; preparation of substrates; assay of hydrolytic activity for soluble and insoluble substrates; and X-ray crystallographic and computational approaches for analysis of structure and catalytic mechanisms of the nylon-degrading enzymes.

Metagenomic Exploration of Plastic Degrading Microbes for Biotechnological Application

Since the last few decades, the promiscuous and uncontrolled use of plastics led to the accumulation of millions of tons of plastic waste in the terrestrial and marine environment. It elevated the risk of environmental pollution and climate change. The concern arises more due to the reckless and unscientific disposal of plastics containing high molecular weight polymers, viz., polystyrene, polyamide, polyvinylchloride, polypropylene, polyurethane, and polyethylene, etc. which are very difficult to degrade. Thus, the focus is now paid to search for efficient, eco-friendly, low-cost waste management technology. Of them, degradation of non-degradable synthetic polymer using diverse microbial agents, viz., bacteria, fungi, and other extremophiles become an emerging option. So far, very few microbial agents and their secreted enzymes have been identified and characterized for plastic degradation, but with low efficiency. It might be due to the predominance of uncultured microbial species, which consequently remain unexplored from the respective plastic degrading milieu. To overcome this problem, metagenomic analysis of microbial population engaged in the plastic biodegradation is advisable to decipher the microbial community structure and to predict their biodegradation potential in situ. Advancements in sequencing technologies and bioinformatics analysis allow the rapid metagenome screening that helps in the identification of total microbial community and also opens up the scope for mining genes or enzymes (hydrolases, laccase, etc.) engaged in polymer degradation. Further, the extraction of the core microbial population and their adaptation, fitness, and survivability can also be deciphered through comparative metagenomic study. It will help to engineer the microbial community and their metabolic activity to speed up the degradation process.

Switched reaction specificity in polyesterases towards amide bond hydrolysis by enzyme engineering

The recalcitrance of plastics like nylon and other polyamides contributes to environmental problems (e.g. microplastics in oceans) and restricts possibilities for recycling. The fact that hitherto discovered amidases (EC 3.5.1. and 3.5.2.) only show no, or low, activity on polyamides currently obstructs biotechnological-assisted depolymerization of man-made materials. In this work, we capitalized on enzyme engineering to enhance the promiscuous amidase activity of polyesterases. Through enzyme design we created a reallocated water network adapted for hydrogen bond formation to synthetic amide backbones for enhanced transition state stabilization in the polyester-hydrolyzing biocatalysts Humicola insolens cutinase and Thermobifida cellulosilytica cutinase 1. This novel concept enabled increased catalytic efficiency towards amide-containing soluble substrates. The afforded enhanced hydrolysis of the amide bond-containing insoluble substrate 3PA 6,6 by designed variants was aligned with improved transition state stabilization identified by molecular dynamics (MD) simulations. Furthermore, the presence of a favorable water-molecule network that interacted with synthetic amides in the variants resulted in a reduced activity on polyethylene terephthalate (PET). Our data demonstrate the potential of using enzyme engineering to improve the amidase activity for polyesterases to act on synthetic amide-containing polymers.

Plastics: Environmental and Biotechnological Perspectives on Microbial Degradation

Plastics are widely used in the global economy, and each year, at least 350 to 400 million tons are being produced. Due to poor recycling and low circular use, millions of tons accumulate annually in terrestrial or marine environments. Today it has become clear that plastic causes adverse effects in all ecosystems and that microplastics are of particular concern to our health. Therefore, recent microbial research has addressed the question of if and to what extent microorganisms can degrade plastics in the environment. This review summarizes current knowledge on microbial plastic degradation. Enzymes available act mainly on the high-molecular-weight polymers of polyethylene terephthalate (PET) and ester-based polyurethane (PUR). Unfortunately, the best PUR- and PET-active enzymes and microorganisms known still have moderate turnover rates. While many reports describing microbial communities degrading chemical additives have been published, no enzymes acting on the high-molecular-weight polymers polystyrene, polyamide, polyvinylchloride, polypropylene, ether-based polyurethane, and polyethylene are known. Together, these polymers comprise more than 80% of annual plastic production. Thus, further research is needed to significantly increase the diversity of enzymes and microorganisms acting on these polymers. This can be achieved by tapping into the global metagenomes of noncultivated microorganisms and dark matter proteins. Only then can novel biocatalysts and organisms be delivered that allow rapid degradation, recycling, or value-added use of the vast majority of most human-made polymers.

Computational Characterization of Nylon 4, a Biobased and Biodegradable Polyamide Superior to Nylon 6

This study is an attempt to develop a theoretical methodology to elucidate or predict the structural characteristics and the physical properties of an isolated polymeric chain and its crystalline state precisely and quantitatively. To be more specific, conformational characteristics of a biobased and biodegradable polyamide, nylon 4, in the free state have been revealed by not only ab initio molecular orbital calculations on its model compound but also nuclear magnetic resonance experiments for the model and nylon 4. Furthermore, the crystal structure and solid-state properties of nylon 4 have been elucidated by density functional theory calculations with a dispersion force correction under periodic boundary conditions. In the free state, the nylon 4 chain forms intramolecular N-H···O=C hydrogen bonds, which force the polymeric chain into distorted conformations including a number of gauche bonds, whereas nylon 4 crystallizes in the fully extended all-trans structure (α form) that is stabilized by intermolecular N-H···O=C hydrogen bonds. The intermolecular interaction energy (ΔE ^CP) in the crystal was accurately calculated via a counterpoise (CP) method contrived here to correct the basis set superposition error, and the ultimate crystalline modulus (E _b ) in the chain axis (b axis) direction at 0 K was also evaluated theoretically. The results were compared with those obtained from the α and γ crystalline forms of nylon 6, and, consequently, the superiority of nylon 4 to nylon 6 in thermal stability and mechanical properties was indicated: the ΔE ^CP and E _b values are, respectively, -214 cal g^-1 and 334 GPa (nylon 4), -191 cal g^-1 and 316 GPa (α form of nylon 6), and -184 cal g^-1 and 120 GPa (γ form of nylon 6). In conclusion, nylon 4 is expected to be put to practical use as a tough environmentally friendly polyamide.

Mitigation measures to avert the impacts of plastics and microplastics in the marine environment (a review)

The increasing demand for and reliance on plastics as an everyday item, and rapid rise in their production and subsequent indiscriminate disposal, rise in human population and industrial growth, have made the material an important environmental concern and focus of interest of many research. Historically, plastic production has increased tremendously to over 250 million tonnes by 2009 with an annual increased rate of 9%. In 2015, the global consumption of plastic materials was reported to be > 300 million tonnes and is expected to surge exponentially. Because plastic polymers are ubiquitous, highly resistant to degradation, the influx of these persistent, complex materials is a risk to human and environmental health. Because microplastics are principally generated from the weathering or breakdown of larger plastics (macroplastics), it is noteworthy and expedient to discuss in detail, expatiate, and tackle this main source. Macro- and microplastic pollution has been reported on a global scale from the poles to the equator. The major problem of concern is that they strangulate and are ingested by a number of aquatic biota especially the filter feeders, such as molluscs, mussels, oysters, from where it enters the food chain and consequently could lead to physical and toxicological effects on aquatic organisms and human being as final consumers. To this end, in order to minimise the negative impacts posed by plastic pollution (macro- and microplastics), a plethora of strategies have been developed at various levels to reduce and manage the plastic wastes. The objective of this paper is to review some published literature on management measures of plastic wastes to curb occurrence and incidents of large- and microplastics pollution in the marine environments.

Microbial enzymes for the recycling of recalcitrant petroleum-based plastics: how far are we?

Petroleum-based plastics have replaced many natural materials in their former applications. With their excellent properties, they have found widespread uses in almost every area of human life. However, the high recalcitrance of many synthetic plastics results in their long persistence in the environment, and the growing amount of plastic waste ending up in landfills and in the oceans has become a global concern. In recent years, a number of microbial enzymes capable of modifying or degrading recalcitrant synthetic polymers have been identified. They are emerging as candidates for the development of biocatalytic plastic recycling processes, by which valuable raw materials can be recovered in an environmentally sustainable way. This review is focused on microbial biocatalysts involved in the degradation of the synthetic plastics polyethylene, polystyrene, polyurethane and polyethylene terephthalate (PET). Recent progress in the application of polyester hydrolases for the recovery of PET building blocks and challenges for the application of these enzymes in alternative plastic waste recycling processes will be discussed.

Microbes on a Bottle: Substrate, Season and Geography Influence Community Composition of Microbes Colonizing Marine Plastic Debris

Plastic debris pervades in our oceans and freshwater systems and the potential ecosystem-level impacts of this anthropogenic litter require urgent evaluation. Microbes readily colonize aquatic plastic debris and members of these biofilm communities are speculated to include pathogenic, toxic, invasive or plastic degrading-species. The influence of plastic-colonizing microorganisms on the fate of plastic debris is largely unknown, as is the role of plastic in selecting for unique microbial communities. This work aimed to characterize microbial biofilm communities colonizing single-use poly(ethylene terephthalate) (PET) drinking bottles, determine their plastic-specificity in contrast with seawater and glass-colonizing communities, and identify seasonal and geographical influences on the communities. A substrate recruitment experiment was established in which PET bottles were deployed for 5–6 weeks at three stations in the North Sea in three different seasons. The structure and composition of the PET-colonizing bacterial/archaeal and eukaryotic communities varied with season and station. Abundant PET-colonizing taxa belonged to the phylum Bacteroidetes (e.g. Flavobacteriaceae, Cryomorphaceae, Saprospiraceae—all known to degrade complex carbon substrates) and diatoms (e.g. Coscinodiscophytina, Bacillariophytina). The PET-colonizing microbial communities differed significantly from free-living communities, but from particle-associated (>3 μm) communities or those inhabiting glass substrates. These data suggest that microbial community assembly on plastics is driven by conventional marine biofilm processes, with the plastic surface serving as raft for attachment, rather than selecting for recruitment of plastic-specific microbial colonizers. A small proportion of taxa, notably, members of the Cryomorphaceae and Alcanivoraceae, were significantly discriminant of PET but not glass surfaces, conjuring the possibility that these groups may directly interact with the PET substrate. Future research is required to investigate microscale functional interactions at the plastic surface.

Potential of Wood-Rotting Fungi to Attack Polystyrene Sulfonate and Its Depolymerisation by Gloeophyllum trabeum via Hydroquinone-Driven Fenton Chemistry

Synthetic polymers often pose environmental hazards due to low biodegradation rates and resulting accumulation. In this study, a selection of wood-rotting fungi representing different lignocellulose decay types was screened for oxidative biodegradation of the polymer polystyrene sulfonate (PSS). Brown-rot basidiomycetes showed PSS depolymerisation of up to 50 % reduction in number-average molecular mass (M_n) within 20 days. In-depth investigations with the most efficient depolymeriser, a Gloeophyllum trabeum strain, pointed at extracellular hydroquinone-driven Fenton chemistry responsible for depolymerisation. Detection of hydroxyl radicals present in the culture supernatants showed good compliance with depolymerisation over the time course of PSS degradation. 2,5-Dimethoxy-1,4-hydroquinone (2,5-DMHQ), which was detected in supernatants of active cultures via liquid chromatography and mass spectrometry, was demonstrated to drive the Fenton processes in G. trabeum cultures. Up to 80% reduction in M_n of PSS where observed when fungal cultures were additionally supplemented with 2,5-dimethoxy benzoquinone, the oxidized from of 2,5-DMHQ. Furthermore, 2,5-DMHQ could initiate the Fenton's reagent-mediated PSS depolymerisation in cell-free systems. In contrast, white-rot fungi were unable to cause substantial depolymerising effects despite the expression of lignin-modifying exo-enzymes. Detailed investigations with laccase from Trametes versicolor revealed that only in presence of certain redox mediators limited PSS depolymerisation occurred. Our results indicate that brown-rot fungi might be suitable organisms for the biodegradation of recalcitrant synthetic polymeric pollutants.

Polyester-based (bio)degradable polymers as environmentally friendly materials for sustainable development

This review focuses on the polyesters such as polylactide and polyhydroxyalkonoates, as well as polyamides produced from renewable resources, which are currently among the most promising (bio)degradable polymers. Synthetic pathways, favourable properties and utilisation (most important applications) of these attractive polymer families are outlined. Environmental impact and in particular (bio)degradation of aliphatic polyesters, polyamides and related copolymer structures are described in view of the potential applications in various fields.

Pentachlorophenol sorption in nylon fiber and removal by immobilized Rhizopus oryzae ENHE

This study describes pentachlophenol (PCP) sorption in nylon fiber in which Rhizopus oryzae ENHE was immobilized to remove the chemical compound. The experimental sorption data were analyzed using the Langmuir, Freundlich, and Redlich-Peterson isotherm models using non-linear error functions to fit the experimental data to the three models. Results showed that the isotherm obtained from the data fitted the three models used. However, the g parameter from Redlich-Peterson model showed that the isotherm obtained approaches the Freundlich model. This support reached the sorption equilibrium concentration at 3mg PCPg(-1)nylon. To study PCP removal capability by R. oryzae ENHE and to eliminate the error caused by PCP sorbed by the nylon fiber during its quantification, nylon fiber at PCP equilibrium sorption concentration was used to immobilize R. oryzae ENHE. It was found that this fungus grew within nylon fiber cubes in presence or not of PCP, even when PCP caused growth inhibition. Maximum biomass accumulated into nylon cubes without PCP was of 32 mg biomass g(-1)nylon and into nylon cubes at PCP equilibrium concentration was of 18 mg g(-1)nylon. The results showed that R. oryzae ENHE immobilized into nylon fiber removed 88.6% and 92% of PCP in cultures with 12.5 and 25 mg PCPL(-1), as initial concentration, respectively. This is the first work to report that a zygomycete, such as R. oryzae ENHE, immobilized into nylon fiber kept its potential to remove PCP.