Towards single-copy gene expression systems making gene cloning physiologically relevant: lambda InCh, a simple Escherichia coli plasmid-chromosome shuttle system

Modulation of RecFORQ- and RecA-Mediated Homologous Recombination in Escherichia coli by Isoforms of Translation Initiation Factor IF2

Homologous recombination (HR) is critically important for chromosomal replication, as well as DNA damage repair in all life forms. In Escherichia coli, the process of HR comprises (i) two parallel presynaptic pathways that are mediated, respectively, by proteins RecB/C/D and RecF/O/R/Q; (ii) a synaptic step mediated by RecA that leads to generation of Holliday junctions (HJs); and (iii) postsynaptic steps mediated sequentially by HJ-acting proteins RuvA/B/C followed by proteins PriA/B/C of replication restart. Combined loss of RuvA/B/C and a DNA helicase UvrD is synthetically lethal, which is attributed to toxicity caused by accumulated HJs since viability in these double mutant strains is restored by removal of the presynaptic or synaptic proteins RecF/O/R/Q or RecA, respectively. Here we show that, as in ΔuvrD strains, ruv mutations confer synthetic lethality in cells deficient for transcription termination factor Rho, and that loss of RecFORQ presynaptic pathway proteins or of RecA suppresses this lethality. Furthermore, loss of IF2-1 (which is one of three isoforms [IF2-1, IF2-2, and IF2-3] of the essential translation initiation factor IF2 that are synthesized from three in-frame initiation codons in infB) also suppressed uvrD-ruv and rho-ruv lethalities, whereas deficiency of IF2-2 and IF2-3 exacerbated the synthetic defects. Our results suggest that Rho deficiency is associated with an increased frequency of HR that is mediated by the RecFORQ pathway along with RecA. They also lend support to earlier reports that IF2 isoforms participate in DNA transactions, and we propose that they do so by modulation of HR functions. IMPORTANCE The process of homologous recombination (HR) is important for maintenance of genome integrity in all cells. In Escherichia coli, the RecA protein is a critical participant in HR, which acts at a step common to and downstream of two HR pathways mediated by the RecBCD and RecFOR proteins, respectively. In this study, an isoform (IF2-1) of the translation initiation factor IF2 has been identified as a novel facilitator of RecA's function in vivo during HR.

inPOSE: A Flexible Toolbox for Chromosomal Cloning and Amplification of Bacterial Transgenes

Cloning the genes and operons encoding heterologous functions in bacterial hosts is now almost exclusively carried out using plasmid vectors. This has multiple drawbacks, including the need for constant selection and variation in copy numbers. The chromosomal integration of transgenes has always offered a viable alternative; however, to date, it has been of limited use due to its tedious nature and often being limited to a single copy. We introduce here a strategy that uses bacterial insertion sequences, which are the simplest autonomous transposable elements to insert and amplify genetic cargo into a bacterial chromosome. Transgene insertion can take place either as transposition or homologous recombination, and copy number amplification is achieved using controlled copy-paste transposition. We display the successful use of IS1 and IS3 for this purpose in Escherichia coli cells using various selection markers. We demonstrate the insertion of selectable genes, an unselectable gene and a five-gene operon in up to two copies in a single step. We continue with the amplification of the inserted cassette to double-digit copy numbers within two rounds of transposase induction and selection. Finally, we analyze the stability of the cloned genetic constructs in the lack of selection and find it to be superior to all investigated plasmid-based systems. Due to the ubiquitous nature of transposable elements, we believe that with proper design, this strategy can be adapted to numerous other bacterial species.

Identifying Inorganic Turbidity in Water Samples as Potential Loss Factor During Nucleic Acid Extraction: Implications for Molecular Fecal Pollution Diagnostics and Source Tracking

Molecular diagnostic methods are increasingly applied for food and environmental analysis. Since several steps are involved in sample processing which can affect the outcome (e.g., adhesion of DNA to the sample matrix, inefficient precipitation of DNA, pipetting errors and (partial) loss of the DNA pellet during DNA isolation), quality control is essential at all processing levels. In soil microbiology, particular attention has been paid to the inorganic component of the sample matrix affecting DNA extractability. In water quality testing, however, this aspect has mostly been neglected so far, although it is conceivable that these mechanisms have a similar impact. The present study was therefore dedicated to investigate possible matrix effects on results of water quality analysis. Field testing in an aquatic environment with pronounced chemo-physical gradients [total suspended solids (TSS), inorganic turbidity, total organic carbon (TOC), and conductivity] indicated a negative association between DNA extractability (using a standard phenol/chloroform extraction procedure) and turbidity (spearman ρ = −0.72, p < 0.001, n = 21). Further detailed laboratory experiments on sediment suspensions confirmed the hypothesis of inorganic turbidity being the main driver for reduced DNA extractability. The observed effects, as known from soil samples, were also indicated to result from competitive effects for free charges on clay minerals, leading to adsorption of DNA to these inorganic particles. A protocol modification by supplementing the extraction buffer with salmon sperm DNA, to coat charged surfaces prior to cell lysis, was then applied on environmental water samples and compared to the standard protocol. At sites characterized by high inorganic turbidity, DNA extractability was significantly improved or made possible in the first place by applying the adapted protocol. This became apparent from intestinal enterococci and microbial source tracking (MST)-marker levels measured by quantitative polymerase chain reaction (qPCR) (100 to 10,000-fold median increase in target concentrations). The present study emphasizes the need to consider inorganic turbidity as a potential loss factor in DNA extraction from water-matrices. Negligence of these effects can lead to a massive bias, by up to several orders of magnitude, in the results of molecular MST and fecal pollution diagnostics.

Transgenesis of mammalian PABP reveals mRNA polyadenylation as a general stress response mechanism in bacteria

In eukaryotes, mRNA 3′-polyadenylation triggers poly(A) binding protein (PABP) recruitment and stabilization. In a stark contrast, polyadenylation marks mRNAs for degradation in bacteria. To study this difference, we trans-express the mammalian nuclear PABPN1 chromosomally and extra-chromosomally in Escherichia coli. Expression of PABPN1 but not the mutant PABPN1 stabilizes polyadenylated mRNAs and improves their half-lives. In the presence of PABPN1, 3′-exonuclease PNPase is not detected on PA-tailed mRNAs compromising the degradation. We show that PABPN1 trans-expression phenocopies pcnB (that encodes poly(A) polymerase, PAPI) mutation and regulates plasmid copy number. Genome-wide RNA-seq analysis shows a general up-regulation of polyadenylated mRNAs on PABPN1 expression, the largest subset of which are those involved in general stress response. However, major global stress regulators are unaffected on PABPN1 expression. Concomitantly, PABPN1 expression or pcnB mutation imparts cellular tolerance to multiple stresses. This study establishes mRNA 3′-polyadenylation as a general stress response mechanism in E. coli.

•

Trans expression of mammalian PABPN1 stabilizes polyadenyated mRNAs in E. coli

•

PABPN1 expression phenocopies pcnB mutation and regulates plasmid copy number

•

3′-polyadenylation acts as a general stress response mechanism in bacteria

•

This study indicates an evolutionary significance of PABP in mRNA metabolism

Plasmid replication based on the T7 origin of replication requires a T7 RNAP variant and inactivation of ribonuclease H

T7 RNA polymerase (RNAP) is a valuable tool in biotechnology, basic research and synthetic biology due to its robust, efficient and selective transcription of genes. Here, we expand the scope of T7 RNAP to include plasmid replication. We present a novel type of plasmid, termed T7 ori plasmids that replicate, in an engineered Escherichia coli, with a T7 phage origin as the sole origin of replication. We find that while the T7 replication proteins; T7 DNA polymerase, T7 single-stranded binding proteins and T7 helicase-primase are dispensable for replication, T7 RNAP is required, although dependent on a T7 RNAP variant with reduced activity. We also find that T7 RNAP-dependent replication of T7 ori plasmids requires the inactivation of cellular ribonuclease H. We show that the system is portable among different plasmid architectures and ribonuclease H-inactivated E. coli strains. Finally, we find that the copy number of T7 ori plasmids can be tuned based on the induction level of RNAP. Altogether, this study assists in the choice of an optimal genetic tool by providing a novel plasmid that requires T7 RNAP for replication.

Random Chromosomal Integration and Screening Yields E. coli K-12 Derivatives Capable of Efficient Sucrose Utilization

Chromosomal expression of heterologous genes offers stability and maintenance advantages over episomal expression, yet remains difficult to optimize through site-specific integration. The challenge has in large part been due to the variability of chromosomal gene expression, which has only recently been shown to be affected by multiple factors, including the local genomic context. In this work we utilize Tn5 transposase to randomly integrate a three-gene csc operon encoding nonphosphotransferase sucrose catabolism into the E. coli K-12 chromosome. Isolates from the transposon library yielded a range of growth rates on sucrose as the sole carbon source, including some that were comparable to that of E. coli K-12 on glucose (μ_max = 0.70 ± 0.03 h^-1). Narrowness of the growth rate distributions and faster growth compared to plasmids indicate that efficient csc expression is attainable. Furthermore, enhanced growth rate upon transduction into strains that underwent adaptive laboratory evolution indicate that sucrose catabolism is not limiting to cellular growth. We also show that transduction of a csc fast-growth locus into an isobutanol production strain yields high titer (7.56 ± 0.25 g/L) on sucrose as the sole carbon source. Our results demonstrate that random integration is an effective strategy for optimizing heterologous expression within the context of cellular metabolism for both fast growth and biochemical production phenotypes.

Nitric oxide disrupts bacterial cytokinesis by poisoning purine metabolism

Cytostasis is the most salient manifestation of the potent antimicrobial activity of nitric oxide (NO), yet the mechanism by which NO disrupts bacterial cell division is unknown. Here, we show that in respiring Escherichia coli, Salmonella, and Bacillus subtilis, NO arrests the first step in division, namely, the GTP-dependent assembly of the bacterial tubulin homolog FtsZ into a cytokinetic ring. FtsZ assembly fails in respiring cells because NO inactivates inosine 5'-monophosphate dehydrogenase in de novo purine nucleotide biosynthesis and quinol oxidases in the electron transport chain, leading to drastic depletion of nucleoside triphosphates, including the GTP needed for the polymerization of FtsZ. Despite inhibiting respiration and dissipating proton motive force, NO does not destroy Z ring formation and only modestly decreases nucleoside triphosphates in glycolytic cells, which obtain much of their ATP by substrate-level phosphorylation and overexpress inosine 5'-monophosphate dehydrogenase. Purine metabolism dictates the susceptibility of early morphogenic steps in cytokinesis to NO toxicity.

CRIMoClo plasmids for modular assembly and orthogonal chromosomal integration of synthetic circuits in Escherichia coli

Background

Synthetic biology heavily depends on rapid and simple techniques for DNA engineering, such as Ligase Cycling Reaction (LCR), Gibson assembly and Golden Gate assembly, all of which allow for fast, multi-fragment DNA assembly. A major enhancement of Golden Gate assembly is represented by the Modular Cloning (MoClo) system that allows for simple library propagation and combinatorial construction of genetic circuits from reusable parts. Yet, one limitation of the MoClo system is that all circuits are assembled in low- and medium copy plasmids, while a rapid route to chromosomal integration is lacking. To overcome this bottleneck, here we took advantage of the conditional-replication, integration, and modular (CRIM) plasmids, which can be integrated in single copies into the chromosome of Escherichia coli and related bacteria by site-specific recombination at different phage attachment (att) sites.

Results

By combining the modularity of the MoClo system with the CRIM plasmids features we created a set of 32 novel CRIMoClo plasmids and benchmarked their suitability for synthetic biology applications. Using CRIMoClo plasmids we assembled and integrated a given genetic circuit into four selected phage attachment sites. Analyzing the behavior of these circuits we found essentially identical expression levels, indicating orthogonality of the loci. Using CRIMoClo plasmids and four different reporter systems, we illustrated a framework that allows for a fast and reliable sequential integration at the four selected att sites. Taking advantage of four resistance cassettes the procedure did not require recombination events between each round of integration. Finally, we assembled and genomically integrated synthetic ECF σ factor/anti-σ switches with high efficiency, showing that the growth defects observed for circuits encoded on medium-copy plasmids were alleviated.

Conclusions

The CRIMoClo system enables the generation of genetic circuits from reusable, MoClo-compatible parts and their integration into 4 orthogonal att sites into the genome of E. coli. Utilizing four different resistance modules the CRIMoClo system allows for easy, fast, and reliable multiple integrations. Moreover, utilizing CRIMoClo plasmids and MoClo reusable parts, we efficiently integrated and alleviated the toxicity of plasmid-borne circuits. Finally, since CRIMoClo framework allows for high flexibility, it is possible to utilize plasmid-borne and chromosomally integrated circuits simultaneously. This increases our ability to permute multiple genetic modules and allows for an easier design of complex synthetic metabolic pathways in E. coli.

The C-terminal tail of the bacterial translocation ATPase SecA modulates its activity

In bacteria, the translocation of proteins across the cytoplasmic membrane by the Sec machinery requires the ATPase SecA. SecA binds ribosomes and recognises nascent substrate proteins, but the molecular mechanism of nascent substrate recognition is unknown. We investigated the role of the C-terminal tail (CTT) of SecA in nascent polypeptide recognition. The CTT consists of a flexible linker (FLD) and a small metal-binding domain (MBD). Phylogenetic analysis and ribosome binding experiments indicated that the MBD interacts with 70S ribosomes. Disruption of the MBD only or the entire CTT had opposing effects on ribosome binding, substrate-protein binding, ATPase activity and in vivo function, suggesting that the CTT influences the conformation of SecA. Site-specific crosslinking indicated that F399 in SecA contacts ribosomal protein uL29, and binding to nascent chains disrupts this interaction. Structural studies provided insight into the CTT-mediated conformational changes in SecA. Our results suggest a mechanism for nascent substrate protein recognition.

A new role for Escherichia coli Dam DNA methylase in prevention of aberrant chromosomal replication

The Dam DNA methylase of Escherichia coli is required for methyl-directed mismatch repair, regulation of chromosomal DNA replication initiation from oriC (which is DnaA-dependent), and regulation of gene expression. Here, we show that Dam suppresses aberrant oriC-independent chromosomal replication (also called constitutive stable DNA replication, or cSDR). Dam deficiency conferred cSDR and, in presence of additional mutations (Δtus, rpoB*35) that facilitate retrograde replication fork progression, rescued the lethality of ΔdnaA mutants. The DinG helicase was required for rescue of ΔdnaA inviability during cSDR. Viability of ΔdnaA dam derivatives was dependent on the mismatch repair proteins, since such viability was lost upon introduction of deletions in mutS, mutH or mutL; thus generation of double strand ends (DSEs) by MutHLS action appears to be required for cSDR in the dam mutant. On the other hand, another DSE-generating agent phleomycin was unable to rescue ΔdnaA lethality in dam+ derivatives (mutS+ or ΔmutS), but it could do so in the dam ΔmutS strain. These results point to a second role for Dam deficiency in cSDR. We propose that in Dam-deficient strains, there is an increased likelihood of reverse replication restart (towards oriC) following recombinational repair of DSEs on the chromosome.

Heterologous co-expression of two β-glucanases and a cellobiose phosphorylase resulted in a significant increase in the cellulolytic activity of the Caldicellulosiruptor bescii exoproteome

The ability to deconstruct plant biomass without conventional pretreatment has made members of the genus Caldicellulosiruptor the target of investigation for the consolidated processing of plant lignocellulosic biomass to biofuels and bioproducts. To investigate the synergy of enzymes involved and to further improve the ability of C. bescii to degrade cellulose, we introduced CAZymes that act synergistically with the C. bescii exoproteome in vivo and in vitro. We recently demonstrated that the Acidothermus cellulolyticus E1 endo-1,4-β-D-glucanase (GH5) with a family 2 carbohydrate-binding module (CBM) increased the activity of C. bescii exoproteome on biomass, presumably acting in concert with CelA. The β-glucanase, GuxA, from A. cellulolyticus is a multi-domain enzyme with strong processive exoglucanase activity, and the cellobiose phosphorylase from Thermotoga maritima catalyzes cellulose degradation acting synergistically with cellobiohydrolases and endoglucanases. We identified new chromosomal insertion sites to co-express these enzymes and the resulting strain showed a significant increase in the enzymatic activity of the exoproteome.

Chemically Inducible Chromosomal Evolution (CIChE) for Multicopy Metabolic Pathway Engineering

Chemically inducible chromosomal evolution (CIChE) was developed for stable multicopy chromosomal integration of heterologous genes. In this technique, flanking an antibiotic selection marker and a gene of interest with identical regions of homology permits gene duplication via recA mediated homologous recombination. A strong selective pressure for gene duplication can be applied by increasing antibiotic concentration, and in a week's time one can create a set of strains with a wide range of cassette copy numbers (upward of 20×), which can be made stable by deletion of recA. Herein, we describe a generalized workflow for this methodology.

ORBIT: a New Paradigm for Genetic Engineering of Mycobacterial Chromosomes

Two efficient recombination systems were combined to produce a versatile method for chromosomal engineering that obviates the need to prepare double-stranded DNA (dsDNA) recombination substrates. A synthetic "targeting oligonucleotide" is incorporated into the chromosome via homologous recombination mediated by the phage Che9c RecT annealase. This oligonucleotide contains a site-specific recombination site for the directional Bxb1 integrase (Int), which allows the simultaneous integration of a "payload plasmid" that contains a cognate recombination site and a selectable marker. The targeting oligonucleotide and payload plasmid are cotransformed into a RecT- and Int-expressing strain, and drug-resistant homologous recombinants are selected in a single step. A library of reusable target-independent payload plasmids is available to generate gene knockouts, promoter replacements, or C-terminal tags. This new system is called ORBIT (for "oligonucleotide-mediated recombineering followed by Bxb1 integrase targeting") and is ideally suited for the creation of libraries consisting of large numbers of deletions, insertions, or fusions in a bacterial chromosome. We demonstrate the utility of this "drag and drop" strategy by the construction of insertions or deletions in over 100 genes in Mycobacteriumtuberculosis and M. smegmatisIMPORTANCE We sought to develop a system that could increase the usefulness of oligonucleotide-mediated recombineering of bacterial chromosomes by expanding the types of modifications generated by an oligonucleotide (i.e., insertions and deletions) and by making recombinant formation a selectable event. This paper describes such a system for use in M. smegmatis and M. tuberculosis By incorporating a single-stranded DNA (ssDNA) version of the phage Bxb1 attP site into the oligonucleotide and coelectroporating it with a nonreplicative plasmid that carries an attB site and a drug selection marker, we show both formation of a chromosomal attP site and integration of the plasmid in a single transformation. No target-specific dsDNA substrates are required. This system will allow investigators studying mycobacterial diseases, including tuberculosis, to easily generate multiple mutants for analysis of virulence factors, identification of new drug targets, and development of new vaccines.

A Robust CRISPR Interference Gene Repression System in Pseudomonas

Pseudomonas spp. are widely used model organisms in different areas of research. Despite the relevance of Pseudomonas in many applications, the use of protein depletion tools in this host remains limited. Here, we developed the CRISPR interference system for gene repression in Pseudomonas spp. using a nuclease-null Streptococcus pasteurianus Cas9 variant (dead Cas9, or dCas9). We demonstrate a robust and titratable gene depletion system with up to 100-fold repression in β-galactosidase activity in P. aeruginosa and 300-fold repression in pyoverdine production in Pseudomonas putida This inducible system enables the study of essential genes, as shown by ftsZ depletions in P. aeruginosa, P. putida, and Pseudomonas fluorescens that led to phenotypic changes consistent with depletion of the targeted gene. Additionally, we performed the first in vivo characterization of protospacer adjacent motif (PAM) site preferences of S. pasteurianus dCas9 and identified NNGCGA as a functional PAM site that resulted in repression efficiencies comparable to the consensus NNGTGA sequence. This discovery significantly expands the potential genomic targets of S. pasteurianus dCas9, especially in GC-rich organisms.IMPORTANCEPseudomonas spp. are prevalent in a variety of environments, such as the soil, on the surface of plants, and in the human body. Although Pseudomonas spp. are widely used as model organisms in different areas of research, existing tools to deplete a protein of interest in these organisms remain limited. We have developed a robust and inducible gene repression tool in P. aeruginosa, P. putida, and P. fluorescens using the Streptococcus pasteurianus dCas9. This method of protein depletion is superior to existing methods, such as promoter replacements and addition of degradation tags, because it does not involve genomic modifications of the target protein, is titratable, and is capable of repressing multiple genes simultaneously. This gene repression system now enables easy depletion of specific proteins in Pseudomonas, accelerating the study and engineering of this widely used model organism.

Aeropyrum pernix membrane topology of protein VKOR promotes protein disulfide bond formation in two subcellular compartments

Disulfide bonds confer stability and activity to proteins. Bioinformatic approaches allow predictions of which organisms make protein disulfide bonds and in which subcellular compartments disulfide bond formation takes place. Such an analysis, along with biochemical and protein structural data, suggests that many of the extremophile Crenarachaea make protein disulfide bonds in both the cytoplasm and the cell envelope. We have sought to determine the oxidative folding pathways in the sequenced genomes of the Crenarchaea, by seeking homologues of the enzymes known to be involved in disulfide bond formation in bacteria. Some Crenarchaea have two homologues of the cytoplasmic membrane protein VKOR, a protein required in many bacteria for the oxidation of bacterial DsbAs. We show that the two VKORs of Aeropyrum pernix assume opposite orientations in the cytoplasmic membrane, when expressed in E. coli. One has its active cysteines oriented toward the E. coli periplasm (ApVKORo) and the other toward the cytoplasm (ApVKORi). Furthermore, the ApVKORo promotes disulfide bond formation in the E. coli cell envelope, while the ApVKORi promotes disulfide bond formation in the E. coli cytoplasm via a co-expressed archaeal protein ApPDO. Amongst the VKORs from different archaeal species, the pairs of VKORs in each species are much more closely related to each other than to the VKORs of the other species. The results suggest two independent occurrences of the evolution of the two topologically inverted VKORs in archaea. Our results suggest a mechanistic basis for the formation of disulfide bonds in the cytoplasm of Crenarchaea.

Redefining the essential trafficking pathway for outer membrane lipoproteins

The outer membrane (OM) of Gram-negative bacteria is a permeability barrier and an intrinsic antibiotic resistance factor. Lipoproteins are OM components that function in cell wall synthesis, diverse secretion systems, and antibiotic efflux pumps. Moreover, each of the essential OM machines that assemble the barrier requires one or more lipoproteins. This dependence is thought to explain the essentiality of the periplasmic chaperone LolA and its OM receptor LolB that traffic lipoproteins to the OM. However, we show that in strains lacking substrates that are toxic when mislocalized, both LolA and LolB can be completely bypassed by activating an envelope stress response without compromising trafficking of essential lipoproteins. We identify the Cpx stress response as a monitor of lipoprotein trafficking tasked with protecting the cell from mislocalized lipoproteins. Moreover, our findings reveal that an alternate trafficking pathway exists that can, under certain conditions, bypass the functions of LolA and LolB, implying that these proteins do not perform any truly essential mechanistic steps in lipoprotein trafficking. Instead, these proteins' key function is to prevent lethal accumulation of mislocalized lipoproteins.

Inhibition of virulence-promoting disulfide bond formation enzyme DsbB is blocked by mutating residues in two distinct regions

Disulfide bonds contribute to protein stability, activity, and folding in a variety of proteins, including many involved in bacterial virulence such as toxins, adhesins, flagella, and pili, among others. Therefore, inhibitors of disulfide bond formation enzymes could have profound effects on pathogen virulence. In the Escherichia coli disulfide bond formation pathway, the periplasmic protein DsbA introduces disulfide bonds into substrates, and then the cytoplasmic membrane protein DsbB reoxidizes DsbA's cysteines regenerating its activity. Thus, DsbB generates a protein disulfide bond de novo by transferring electrons to the quinone pool. We previously identified an effective pyridazinone-related inhibitor of DsbB enzymes from several Gram-negative bacteria. To map the protein residues that are important for the interaction with this inhibitor, we randomly mutagenized by error-prone PCR the E. coli dsbB gene and selected dsbB mutants that confer resistance to this drug using two approaches. We characterized in vivo and in vitro some of these mutants that map to two areas in the structure of DsbB, one located between the two first transmembrane segments where the quinone ring binds and the other located in the second periplasmic loop of DsbB, which interacts with DsbA. In addition, we show that a mutant version of a protein involved in lipopolysaccharide assembly, lptD₄₂₁₃, is synthetically lethal with the deletion of dsbB as well as with DsbB inhibitors. This finding suggests that drugs decreasing LptD assembly may be synthetically lethal with inhibitors of the Dsb pathway, potentiating the antibiotic effects.

SecA Cotranslationally Interacts with Nascent Substrate Proteins In Vivo

SecA is an essential component of the Sec machinery in bacteria, which is responsible for transporting proteins across the cytoplasmic membrane. Recent work from our laboratory indicates that SecA binds to ribosomes. Here, we used two different approaches to demonstrate that SecA also interacts with nascent polypeptides in vivo and that these polypeptides are Sec substrates. First, we photo-cross-linked SecA to ribosomes in vivo and identified mRNAs that copurify with SecA. Microarray analysis of the copurifying mRNAs indicated a strong enrichment for proteins containing Sec-targeting sequences. Second, we used a 2-dimensional (2-D) gel approach to analyze radioactively labeled nascent polypeptides that copurify with SecA, including maltose binding protein, a well-characterized SecA substrate. The interaction of SecA with nascent chains was not strongly affected in cells lacking SecB or trigger factor, both of which also interact with nascent Sec substrates. Indeed, the ability of SecB to interact with nascent chains was disrupted in strains in which the interaction between SecA and the ribosome was defective. Analysis of the interaction of SecA with purified ribosomes containing arrested nascent chains in vitro indicates that SecA can begin to interact with a variety of nascent chains when they reach a length of ∼110 amino acids, which is considerably shorter than the length required for interaction with SecB. Our results suggest that SecA cotranslationally recognizes nascent Sec substrates and that this recognition could be required for the efficient delivery of these proteins to the membrane-embedded Sec machinery.

IMPORTANCE SecA is an ATPase that provides the energy for the translocation of proteins across the cytoplasmic membrane by the Sec machinery in bacteria. The translocation of most of these proteins is uncoupled from protein synthesis and is frequently described as “posttranslational.” Here, we show that SecA interacts with nascent Sec substrates. This interaction is not dependent on SecB or trigger factor, which also interact with nascent Sec substrates. Moreover, the interaction of SecB with nascent polypeptides is dependent on the interaction of SecA with the ribosome, suggesting that interaction of the nascent chain with SecA precedes interaction with SecB. Our results suggest that SecA could recognize substrate proteins cotranslationally in order to efficiently target them for uncoupled protein translocation.

Engineering of a Highly Efficient Escherichia coli Strain for Mevalonate Fermentation through Chromosomal Integration

Chromosomal integration of heterologous metabolic pathways is optimal for industrially relevant fermentation, as plasmid-based fermentation causes extra metabolic burden and genetic instabilities. In this work, chromosomal integration was adapted for the production of mevalonate, which can be readily converted into β-methyl-δ-valerolactone, a monomer for the production of mechanically tunable polyesters. The mevalonate pathway, driven by a constitutive promoter, was integrated into the chromosome of Escherichia coli to replace the native fermentation gene adhE or ldhA The engineered strains (CMEV-1 and CMEV-2) did not require inducer or antibiotic and showed slightly higher maximal productivities (0.38 to ∼0.43 g/liter/h) and yields (67.8 to ∼71.4% of the maximum theoretical yield) than those of the plasmid-based fermentation. Since the glycolysis pathway is the first module for mevalonate synthesis, atpFH deletion was employed to improve the glycolytic rate and the production rate of mevalonate. Shake flask fermentation results showed that the deletion of atpFH in CMEV-1 resulted in a 2.1-fold increase in the maximum productivity. Furthermore, enhancement of the downstream pathway by integrating two copies of the mevalonate pathway genes into the chromosome further improved the mevalonate yield. Finally, our fed-batch fermentation showed that, with deletion of the atpFH and sucA genes and integration of two copies of the mevalonate pathway genes into the chromosome, the engineered strain CMEV-7 exhibited both high maximal productivity (∼1.01 g/liter/h) and high yield (86.1% of the maximum theoretical yield, 30 g/liter mevalonate from 61 g/liter glucose after 48 h in a shake flask).

IMPORTANCE

Metabolic engineering has succeeded in producing various chemicals. However, few of these chemicals are commercially competitive with the conventional petroleum-derived materials. In this work, chromosomal integration of the heterologous pathway and subsequent optimization strategies ensure stable and efficient (i.e., high-titer, high-yield, and high-productivity) production of mevalonate, which demonstrates the potential for scale-up fermentation. Among the optimization strategies, we demonstrated that enhancement of the glycolytic flux significantly improved the productivity. This result provides an example of how to tune the carbon flux for the optimal production of exogenous chemicals.

Rapid and Efficient One-Step Metabolic Pathway Integration in E. coli

Methods for importing heterologous genes into genetically tractable hosts are among the most desired tools of synthetic biology. Easy plug-and-play construction methods to rapidly test genes and pathways stably in the host genome would expedite synthetic biology and metabolic engineering applications. Here, we describe a CRISPR-based strategy that allows highly efficient, single step integration of large pathways in Escherichia coli. This strategy allows high efficiency integration in a broad range of homology arm sizes and genomic positions, with efficiencies ranging from 70 to 100% in 7 distinct loci. To demonstrate the large size capability, we integrated a 10 kb construct to implement isobutanol production in a single day. The ability to efficiently integrate entire metabolic pathways in a rapid and markerless manner will facilitate testing and engineering of novel pathways using the E. coli genome as a stable testing platform.

Individual cell heterogeneity in Predictive Food Microbiology: Challenges in predicting a "noisy" world

Gene expression is a fundamentally noisy process giving rise to a significant cell to cell variability at the phenotype level. The phenotypic noise is manifested in a wide range of microbial traits. Heterogeneous behavior of individual cells is observed at the growth, survival and inactivation responses and should be taken into account in the context of Predictive Food Microbiology (PMF). Recent methodological advances can be employed for the study and modeling of single cell dynamics leading to a new generation of mechanistic models which can provide insight into the link between phenotype, gene-expression, protein and metabolic functional units at the single cell level. Such models however, need to deal with an enormous amount of interactions and processes that influence each other, forming an extremely complex system. In this review paper, we discuss the importance of noise and present the future challenges in predicting the "noisy" microbial responses in foods.

Complete Genome Sequence of the Engineered Escherichia coli SHuffle Strains and Their Wild-Type Parents

SHuffle strains are genetically engineered Escherichia coli strains that are capable of oxidizing cysteines within proteins to form disulfide bonds. Here we present the complete genome of both the K-12 and B versions of SHuffle strains along with their parental ancestors. These strains have been of significant use to both the general scientific community and the biotech industry, interested in producing novel disulfide-bonded proteins that were hitherto unable to be expressed in standard E. coli expression strains.

Escherichia coli inner membrane protein YciB interacts with ZipA that is important for cell division

Escherichia coli propagates by undergoing cycles of lateral elongation, septum formation, and cell fission at the mid-cell. A large number of genes involved in these processes have been identified, but it is likely that others remain. A deletion mutant of yciB (ΔyciB) is shorter in the cell length compared to wild type and, in contrast, over-expression of yciB causes elongation of the cell. Furthermore, the septum localization of ZipA, an essential protein of cell division, is disturbed in a ΔyciB mutant. Purified YciB protein directly interacted with ZipA, which might indicate that YciB is involved in the cell envelope synthesis directed by ZipA in a PBP3-independent manner.

Essential validation methods for E. coli strains created by chromosome engineering

BACKGROUND

Chromosome engineering encompasses a collection of homologous recombination-based techniques that are employed to modify the genome of a model organism in a controlled fashion. Such techniques are widely used in both fundamental and industrial research to introduce multiple insertions in the same Escherichia coli strain. To date, λ-Red recombination (also known as recombineering) and P1 phage transduction are the most successfully implemented chromosome engineering techniques in E. coli. However, due to errors that can occur during the strain creation process, reliable validation methods are essential upon alteration of a strain's chromosome.

RESULTS AND DISCUSSION

Polymerase chain reaction (PCR)-based methods and DNA sequence analysis are rapid and powerful methods to verify successful integration of DNA sequences into a chromosome. Even though these verification methods are necessary, they may not be sufficient in detecting all errors, imposing the requirement of additional validation methods. For example, as extraneous insertions may occur during recombineering, we highlight the use of Southern blotting to detect their presence. These unwanted mutations can be removed via transducing the region of interest into the wild type chromosome using P1 phages. However, in doing so one must verify that both the P1 lysate and the strains utilized are free from contamination with temperate phages, as these can lysogenize inside a cell as a large plasmid. Thus, we illustrate various methods to probe for temperate phage contamination, including cross-streak agar and Evans Blue-Uranine (EBU) plate assays, whereby the latter is a newly reported technique for this purpose in E. coli. Lastly, we discuss methodologies for detecting defects in cell growth and shape characteristics, which should be employed as an additional check.

CONCLUSION

The simple, yet crucial validation techniques discussed here can be used to reliably verify any chromosomally engineered E. coli strains for errors such as non-specific insertions in the chromosome, temperate phage contamination, and defects in growth and cell shape. While techniques such as PCR and DNA sequence verification should standardly be performed, we illustrate the necessity of performing these additional assays. The discussed techniques are highly generic and can be easily applied to any type of chromosome engineering.

Compounds targeting disulfide bond forming enzyme DsbB of Gram-negative bacteria

In bacteria, disulfide bonds confer stability on many proteins exported to the cell envelope or beyond. These proteins include numerous bacterial virulence factors, and thus bacterial enzymes that promote disulfide bond formation represent targets for compounds inhibiting bacterial virulence. Here, we describe a new target- and cell-based screening methodology for identifying compounds that inhibit the disulfide bond-forming enzymes Escherichia coli DsbB (EcDsbB) or Mycobacterium tuberculosis VKOR (MtbVKOR), which can replace EcDsbB, although the two are not homologs. Initial screening of 51,487 compounds yielded six specifically inhibiting EcDsbB. These compounds share a structural motif and do not inhibit MtbVKOR. A medicinal chemistry approach led us to select related compounds, some of which are much more effective DsbB inhibitors than those found in the screen. These compounds inhibit purified DsbB and prevent anaerobic growth of E. coli. Furthermore, these compounds inhibit all but one of the DsbBs of nine other Gram-negative pathogenic bacteria tested.

An integrated biotechnology platform for developing sustainable chemical processes

Genomatica has established an integrated computational/experimental metabolic engineering platform to design, create, and optimize novel high performance organisms and bioprocesses. Here we present our platform and its use to develop E. coli strains for production of the industrial chemical 1,4-butanediol (BDO) from sugars. A series of examples are given to demonstrate how a rational approach to strain engineering, including carefully designed diagnostic experiments, provided critical insights about pathway bottlenecks, byproducts, expression balancing, and commercial robustness, leading to a superior BDO production strain and process.

Construction and Characterization of an E. coli bamD Depletion Strain

The central Bam components BamA and BamD are both essential genes in E. coli, a fact that often confounds genetic analysis using classical methods. The isolation of "depletion strains" in which these genes can be conditionally expressed removes this obstacle and facilitates the in vivo characterization of Bam function. This chapter describes an efficient two-step recombineering method for the construction of such a depletion strain, which contains an arabinose-inducible allele of bamD, using the λ Red system. Additionally, a simple protocol is presented for the depletion of bamD expression in live cells, which is particularly useful for the characterization of mutant alleles of bamD (complementation analysis). In principle, the procedures described can be adapted to produce and characterize depletion strains for any essential gene in E. coli or any other bacterium that is similarly amenable to genome engineering.

Supplementation of substrate uptake gene enhances the expression of rhIFN-β in high cell density fed-batch cultures of Escherichia coli

Over-expression of recombinant proteins in Escherichia coli triggers a metabolic stress response which causes a sharp decline in both growth and product formation rates post induction. We identified a key down-regulated substrate utilization gene, glycerol kinase (glpK), whose up-regulation could help alleviate this stress response. In a proof of principal study conducted in shake flask cultures, the glpK gene under the "ara" promoter in a pPROLar.A122 vector was co-transformed along with the recombinant interferon-β (rhIFN-β) gene in a pET22b vector into E. coli BL-21(DE3) cells. Co-expression of glpK improved the expression levels of rhIFN-β in glycerol containing medium, while no such gain was observed in medium without glycerol. This study was extended to high cell density fed-batch cultures where exponential feeding of complex substrates was done to increase biomass and hence product titers. For this we first constructed a modified E. coli strain BL-21(glpK (+)) where the glpK gene was inserted downstream of the ibpA promoter in the host chromosome. There was a significant improvement in growth as well as expression levels of rhIFN-β in this modified strain when the feed medium contained high glycerol. A final product concentration of 4.8 g/l of rhIFN-β was obtained with the modified strain which was 35 % higher than the control.

Genome-scale analysis of escherichia coli FNR reveals complex features of transcription factor binding

FNR is a well-studied global regulator of anaerobiosis, which is widely conserved across bacteria. Despite the importance of FNR and anaerobiosis in microbial lifestyles, the factors that influence its function on a genome-wide scale are poorly understood. Here, we report a functional genomic analysis of FNR action. We find that FNR occupancy at many target sites is strongly influenced by nucleoid-associated proteins (NAPs) that restrict access to many FNR binding sites. At a genome-wide level, only a subset of predicted FNR binding sites were bound under anaerobic fermentative conditions and many appeared to be masked by the NAPs H-NS, IHF and Fis. Similar assays in cells lacking H-NS and its paralog StpA showed increased FNR occupancy at sites bound by H-NS in WT strains, indicating that large regions of the genome are not readily accessible for FNR binding. Genome accessibility may also explain our finding that genome-wide FNR occupancy did not correlate with the match to consensus at binding sites, suggesting that significant variation in ChIP signal was attributable to cross-linking or immunoprecipitation efficiency rather than differences in binding affinities for FNR sites. Correlation of FNR ChIP-seq peaks with transcriptomic data showed that less than half of the FNR-regulated operons could be attributed to direct FNR binding. Conversely, FNR bound some promoters without regulating expression presumably requiring changes in activity of condition-specific transcription factors. Such combinatorial regulation may allow Escherichia coli to respond rapidly to environmental changes and confer an ecological advantage in the anaerobic but nutrient-fluctuating environment of the mammalian gut.

Regulation of gene expression by transcription factors (TFs) is key to adaptation to environmental changes. Our comprehensive, genome-scale analysis of a prototypical global TF, the anaerobic regulator FNR from Escherichia coli, leads to several novel and unanticipated insights into the influences on FNR binding genome-wide and the complex structure of bacterial regulons. We found that binding of NAPs restricts FNR binding at a subset of sites, suggesting that the bacterial genome is not freely accessible for FNR binding. Our finding that less than half of the predicted FNR binding sites were occupied in vivo further challenges the utility of using bioinformatic searches alone to predict regulon structure, reinforcing the need for experimental determination of TF binding. By correlating the occupancy data with transcriptomic data, we confirm that FNR serves as a global signal of anaerobiosis but expression of some operons in the FNR regulon require other regulators sensitive to alternative environmental stimuli. Thus, FNR binding and regulation appear to depend on both the nucleoprotein structure of the chromosome and on combinatorial binding of FNR with other regulators. Both of these phenomena are typical of TF binding in eukaryotes; our results establish that they are also features of bacterial TF binding.

A standard vector for the chromosomal integration and characterization of BioBrick™ parts in Escherichia coli

Background

The chromosomal integration of biological parts in the host genome enables the engineering of plasmid-free stable strains with single-copy insertions of the desired gene networks. Although different integrative vectors were proposed, no standard pre-assembled genetic tool is available to carry out this task. Synthetic biology concepts can contribute to the development of standardized and user friendly solutions to easily produce engineered strains and to rapidly characterize the desired genetic parts in single-copy context.

Results

In this work we report the design of a novel integrative vector that allows the genomic integration of biological parts compatible with the RFC10, RFC23 and RFC12 BioBrick™ standards in Escherichia coli. It can also be specialized by using BioBrick™ parts to target the desired integration site in the host genome. The usefulness of this vector has been demonstrated by integrating a set of BioBrick™ devices in two different loci of the E. coli chromosome and by characterizing their activity in single-copy. Construct stability has also been evaluated and compared with plasmid-borne solutions.

Conclusions

Physical modularity of biological parts has been successfully applied to construct a ready-to-engineer BioBrick™ vector, suitable for a stable chromosomal insertion of standard parts via the desired recombination method, i.e. the bacteriophage integration mechanism or homologous recombination. In contrast with previously proposed solutions, it is a pre-assembled vector containing properly-placed restriction sites for the direct transfer of various formats of BioBrick™ parts. This vector can facilitate the characterization of parts avoiding copy number artefacts and the construction of antibiotic resistance-free engineered microbes, suitable for industrial use.

Implementation of stable and complex biological systems through recombinase-assisted genome engineering

Evaluating the performance of engineered biological systems with high accuracy and precision is nearly impossible with the use of plasmids due to phenotypic noise generated by genetic instability and natural population dynamics. Minimizing this uncertainty therefore requires a paradigm shift towards engineering at the genomic level. Here, we introduce an advanced design principle for the stable installment and implementation of complex biological systems through recombinase-assisted genome engineering (RAGE). We apply this concept to the development of a robust strain of Escherichia coli capable of producing ethanol directly from brown macroalgae. RAGE significantly expedites the optimal implementation of a 34 kb heterologous pathway for alginate metabolism based on genetic background, integration locus, copy number and compatibility with two other pathway modules (alginate degradation and ethanol production). The resulting strain achieves a ~40% higher titre than its plasmid-based counterpart and enables substantial improvements in titre (~330%) and productivity (~1,200%) after 50 generations.

Rho-dependent transcription termination is essential to prevent excessive genome-wide R-loops in Escherichia coli

Two pathways of transcription termination, factor-independent and -dependent, exist in bacteria. The latter pathway operates on nascent transcripts that are not simultaneously translated and requires factors Rho, NusG, and NusA, each of which is essential for viability of WT Escherichia coli. NusG and NusA are also involved in antitermination of transcription at the ribosomal RNA operons, as well as in regulating the rates of transcription elongation of all genes. We have used a bisulfite-sensitivity assay to demonstrate genome-wide increase in the occurrence of RNA-DNA hybrids (R-loops), including from antisense and read-through transcripts, in a nusG missense mutant defective for Rho-dependent termination. Lethality associated with complete deficiency of Rho and NusG (but not NusA) was rescued by ectopic expression of an R-loop-helicase UvsW, especially so on defined growth media. Our results suggest that factor-dependent transcription termination subserves a surveillance function to prevent translation-uncoupled transcription from generating R-loops, which would block replication fork progression and therefore be lethal, and that NusA performs additional essential functions as well in E. coli. Prevention of R-loop-mediated transcription-replication conflicts by cotranscriptional protein engagement of nascent RNA is emerging as a unifying theme among both prokaryotes and eukaryotes.

Regulation of iron-sulphur cluster homeostasis through transcriptional control of the Isc pathway by [2Fe-2S]-IscR in Escherichia coli

Fe-S clusters are essential across the biological world, yet how cells regulate expression of Fe-S cluster biogenesis pathways to cope with changes in Fe-S cluster demand is not well understood. Here, we describe the mechanism by which IscR, a [2Fe-2S] cluster-containing regulator of Escherichia coli, adjusts the synthesis of the Isc Fe-S biogenesis pathway to maintain Fe-S homeostasis. Our data indicate that a negative feedback loop operates to repress transcription of the iscRSUA-hscBA-fdx operon, encoding IscR and the Isc machinery, through binding of [2Fe-2S]-IscR to two upstream binding sites. IscR was shown to require primarily the Isc pathway for synthesis of its Fe-S cluster, providing a link between IscR activity and demands for Fe-S clusters through the levels of the Isc system. Surprisingly, the isc operon was more repressed under anaerobic conditions, indicating increased Fe-S cluster occupancy of IscR and decreased Fe-S cluster biogenesis demand relative to aerobic conditions. Consistent with this notion, overexpression of a Fe-S protein under aerobic conditions, but not under anaerobic conditions, led to derepression of P(iscR). Together, these data show how transcriptional control of iscRSUA-hscBA-fdx by [2Fe-2S]-IscR allows E. coli to respond efficiently to varying Fe-S demands.

Inner Membrane Protein YhcB Interacts with RodZ Involved in Cell Shape Maintenance in Escherichia coli

Depletion of YhcB, an inner membrane protein of Escherichia coli, inhibited the growth of rodZ deletion mutant showing that the loss of both YhcB and RodZ is synthetically lethal. Furthermore, YhcB was demonstrated to interact with RodZ as well as several other proteins involved in cell shape maintenance and an inner membrane protein YciS of unknown function, using bacterial two-hybrid system. These observations seem to indicate that YhcB is involved in the biogenesis of cell envelope and the maintenance of cell shape together with RodZ.

The β-lactam resistance protein Blr, a small membrane polypeptide, is a component of the Escherichia coli cell division machinery

In Escherichia coli, cell division is performed by a multimolecular machinery called the divisome, made of 10 essential proteins and more than 20 accessory proteins. Through a bacterial two-hybrid library screen, we identified the E. coli β-lactam resistance protein Blr, a short membrane polypeptide of 41 residues, as an interacting partner of the essential cell division protein FtsL. In addition to FtsL, Blr was found to associate with several other divisomal proteins, including FtsI, FtsK, FtsN, FtsQ, FtsW, and YmgF. Using fluorescently tagged Blr, we showed that this peptide localizes to the division septum and that its colocalization requires the presence of the late division protein FtsN. Although Blr is not essential, previous studies have shown that the inactivation of the blr gene increased the sensitivity of bacteria to β-lactam antibiotics or their resistance to cell envelope stress. Here, we found that Blr, when overproduced, restores the viability of E. coli ftsQ1(Ts) cells, carrying a thermosensitive allele of the ftsQ gene, during growth under low-osmotic-strength conditions (e.g., in synthetic media or in Luria-Bertani broth without NaCl). In contrast, the inactivation of blr increases the osmosensitivity of ftsQ1(Ts) cells, and blr ftsQ1 double mutants exhibit filamentous growth in LB broth even at a moderate salt concentration (0.5% NaCl) compared to parental ftsQ1(Ts) cells. Altogether, our results suggest that the small membrane polypeptide Blr is a novel component of the E. coli cell division apparatus involved in the stabilization of the divisome under certain stress conditions.

SHuffle, a novel Escherichia coli protein expression strain capable of correctly folding disulfide bonded proteins in its cytoplasm

BACKGROUND

Production of correctly disulfide bonded proteins to high yields remains a challenge. Recombinant protein expression in Escherichia coli is the popular choice, especially within the research community. While there is an ever growing demand for new expression strains, few strains are dedicated to post-translational modifications, such as disulfide bond formation. Thus, new protein expression strains must be engineered and the parameters involved in producing disulfide bonded proteins must be understood.

RESULTS

We have engineered a new E. coli protein expression strain named SHuffle, dedicated to producing correctly disulfide bonded active proteins to high yields within its cytoplasm. This strain is based on the trxB gor suppressor strain SMG96 where its cytoplasmic reductive pathways have been diminished, allowing for the formation of disulfide bonds in the cytoplasm. We have further engineered a major improvement by integrating into its chromosome a signal sequenceless disulfide bond isomerase, DsbC. We probed the redox state of DsbC in the oxidizing cytoplasm and evaluated its role in assisting the formation of correctly folded multi-disulfide bonded proteins. We optimized protein expression conditions, varying temperature, induction conditions, strain background and the co-expression of various helper proteins. We found that temperature has the biggest impact on improving yields and that the E. coli B strain background of this strain was superior to the K12 version. We also discovered that auto-expression of substrate target proteins using this strain resulted in higher yields of active pure protein. Finally, we found that co-expression of mutant thioredoxins and PDI homologs improved yields of various substrate proteins.

CONCLUSIONS

This work is the first extensive characterization of the trxB gor suppressor strain. The results presented should help researchers design the appropriate protein expression conditions using SHuffle strains.

Defective lipoprotein sorting induces lolA expression through the Rcs stress response phosphorelay system

The Escherichia coli LolA protein is a lipoprotein-specific chaperone that carries lipoproteins from the inner to the outer membrane. A dominant negative LolA mutant, LolA(I93C/F140C), in which both (93)Ile and (140)Phe are replaced by Cys, binds tightly to the lipoprotein-dedicated ABC transporter LolCDE complex on the inner membrane and therefore inhibits the detachment of outer membrane-specific lipoproteins from the inner membrane. We found that the expression of this mutant strongly induced lolA gene transcription. The depletion of the LolA or LolB protein also triggered lolA gene transcription, indicating that the inhibition of outer membrane lipoprotein transport triggers lolA transcription. To elucidate the mechanism, we isolated mutants that are unable to induce lolA transcription using the lacZ gene fused to the lolA promoter as a reporter and found that the Rcs phosphorelay system directly regulates lolA transcription. An outer membrane lipoprotein, RcsF, was essential for this activation, while the coactivator RcsA was dispensable. Taking the observation that an RcsF mutant localized in the inner membrane constitutively activated the Rcs phosphorelay system into consideration, the results shown here strongly suggest that correct lipoprotein sorting to the outer membrane is monitored by RcsF, which plays a key role in the Rcs stress response system.

Activation of the Cpx phosphorelay signal transduction system in acidic phospholipid-deficient pgsA mutant cells of Escherichia coli

The pgsA gene encodes the enzyme for the committed step in the synthesis of acidic phospholipids in Escherichia coli, and the pssA gene does the same for zwitterionic phospholipid. It has been reported that the Rcs and Cpx phosphorelay signal transduction systems are activated in pgsA- and pssA-defective mutants, respectively. In this study, we show that the Cpx system is activated also in a pgsA mutant, whereas the Rcs system was not activated in a pssA mutant. Lack of phosphatidylglycerol in pgsA mutants causes inadequate modification of lipoproteins, resulting in poor localization to the outer membrane. The outer membrane lipoprotein RcsF is necessary for the response of the Rcs system to various stimuli, and Rcs activation in pgsA mutants involves inner membrane mislocalization of this lipoprotein. The outer membrane lipoprotein NlpE, however, while necessary for the surface adhesion-induced Cpx response, was not involved in Cpx activation in the pgsA mutant.

Characterization of an inducible promoter in different DNA copy number conditions

BACKGROUND

The bottom-up programming of living organisms to implement novel user-defined biological capabilities is one of the main goals of synthetic biology. Currently, a predominant problem connected with the construction of even simple synthetic biological systems is the unpredictability of the genetic circuitry when assembled and incorporated in living cells. Copy number, transcriptional/translational demand and toxicity of the DNA-encoded functions are some of the major factors which may lead to cell overburdening and thus to nonlinear effects on system output. It is important to disclose the linearity working boundaries of engineered biological systems when dealing with such phenomena.

RESULTS

The output of an N-3-oxohexanoyl-L-homoserine lactone (HSL)-inducible RFP-expressing device was studied in Escherichia coli in different copy number contexts, ranging from 1 copy per cell (integrated in the genome) to hundreds (via multicopy plasmids). The system is composed by a luxR constitutive expression cassette and a RFP gene regulated by the luxI promoter, which is activated by the HSL-LuxR complex. System output, in terms of promoter activity as a function of HSL concentration, was assessed relative to the one of a reference promoter in identical conditions by using the Relative Promoter Units (RPU) approach. Nonlinear effects were observed in the maximum activity, which is identical in single and low copy conditions, while it decreases for higher copy number conditions. In order to properly compare the luxI promoter strength among all the conditions, a mathematical modeling approach was used to relate the promoter activity to the estimated HSL-LuxR complex concentration, which is the actual activator of transcription. During model fitting, a correlation between the copy number and the dissociation constant of HSL-LuxR complex and luxI promoter was observed.

CONCLUSIONS

Even in a simple inducible system, nonlinear effects are observed and non-trivial data processing is necessary to fully characterize its operation. The in-depth analysis of model systems like this can contribute to the advances in the synthetic biology field, since increasing the knowledge about linearity and working boundaries of biological phenomena could lead to a more rational design of artificial systems, also through mathematical models, which, for example, have been used here to study hard-to-predict interactions.

The variable subdomain of Escherichia coli SecA functions to regulate SecA ATPase activity and ADP release

Bacterial SecA proteins can be categorized by the presence or absence of a variable subdomain (VAR) located within nucleotide-binding domain II of the SecA DEAD motor. Here we show that VAR is dispensable for SecA function, since the VAR deletion mutant secAΔ519-547 displayed a wild-type rate of cellular growth and protein export. Loss or gain of VAR is extremely rare in the history of bacterial evolution, indicating that it appears to contribute to secA function within the relevant species in their natural environments. VAR removal also results in additional secA phenotypes: azide resistance (Azi(r)) and suppression of signal sequence defects (PrlD). The SecAΔ(519-547) protein was found to be modestly hyperactive for SecA ATPase activities and displayed an accelerated rate of ADP release, consistent with the biochemical basis of azide resistance. Based on our findings, we discuss models whereby VAR allosterically regulates SecA DEAD motor function at SecYEG.

A versatile element for gene addition in bacterial chromosomes

The increasing interest in genetic manipulation of bacterial host metabolic pathways for protein or small molecule production has led to a need to add new genes to a chromosome quickly and easily without leaving behind a selectable marker. The present report describes a vector and four-day procedure that enable site-specific chromosomal insertion of cloned genes in a context insulated from external transcription, usable once in a construction series. The use of rhamnose-inducible transcription from rhaBp allows regulation of the inserted genes independently of the commonly used IPTG and arabinose strategies. Using lacZ as a reporter, we first show that expression from the rhamnose promoter is tightly regulatable, exhibiting very low leakage of background expression compared with background, and moderate rhamnose-induced expression compared with IPTG-induced expression from lacp. Second, the expression of a DNA methyltransferase was used to show that rhamnose regulation yielded on-off expression of this enzyme, such that a resident high-copy plasmid was either fully sensitive or fully resistant to isoschizomer restriction enzyme cleavage. In both cases, growth medium manipulation allows intermediate levels of expression. The vehicle can also be adapted as an ORF-cloning vector.

Pilotin-secretin recognition in the type II secretion system of Klebsiella oxytoca

A crucial aspect of the functionality of bacterial type II secretion systems is the targeting and assembly of the outer membrane secretin. In the Klebsiella oxytoca type II secretion system, the lipoprotein PulS, a pilotin, targets secretin PulD monomers through the periplasm to the outer membrane. We present the crystal structure of PulS, an all-helical bundle that is structurally distinct from proteins with similar functions. Replacement of valine at position 42 in a charged groove of PulS abolished complex formation between a non-lipidated variant of PulS and a peptide corresponding to the unfolded region of PulD to which PulS binds (the S-domain), in vitro, as well as PulS function in vivo. Substitutions of other residues in the groove also diminished the interaction with the S-domain in vitro but exerted less marked effects in vivo. We propose that the interaction between PulS and the S-domain is maintained through a structural adaptation of the two proteins that could be influenced by cis factors such as the fatty acyl groups on PulS, as well as periplasmic trans-acting factors, which represents a possible paradigm for chaperone-target protein interactions.

Two pathways for RNase E action in Escherichia coli in vivo and bypass of its essentiality in mutants defective for Rho-dependent transcription termination

The endonuclease RNase E of Escherichia coli is essential for viability, but deletion of its C-terminal half (CTH) is not lethal. RNase E preferentially acts on 5'-monophosphorylated RNA whose generation from primary transcripts is catalysed by RppH, but ΔRppH strains are viable. Here we show that the RNase E-ΔCTH ΔRppH combination is lethal, and that the lethality is suppressed by rho or nusG mutations impairing Rho-dependent transcription termination. Lethality was correlated with defects in bulk mRNA decay and tRNA processing, which were reversed by the rho suppressor. Lethality suppression was dependent on RNase H1 or the helicase UvsW of phage T4, both of which act to remove RNA-DNA hybrids (R-loops). The rho and nusG mutations also rescued inviability of a double alteration R169Q (that abolishes 5'-sensing) with ΔCTH in RNase E, as also that of conditional RNase E deficiency. We suggest that the ΔCTH alteration leads to loss of a second 5'-end-independent pathway of RNase E action. We further propose that an increased abundance of R-loops in the rho and nusG mutants, although ordinarily inimical to growth, contributes to rescue the lethality associated with loss of the two RNase E cleavage pathways by providing an alternative means of RNA degradation.

Role of leucine zipper motifs in association of the Escherichia coli cell division proteins FtsL and FtsB

FtsL and FtsB are two inner-membrane proteins that are essential constituents of the cell division apparatus of Escherichia coli. In this study, we demonstrate that the leucine zipper-like (LZ) motifs, located in the periplasmic domain of FtsL and FtsB, are required for an optimal interaction between these two essential proteins.

Circuitry linking the Csr and stringent response global regulatory systems

CsrA protein regulates important cellular processes by binding to target mRNAs and altering their translation and/or stability. In Escherichia coli, CsrA binds to sRNAs, CsrB and CsrC, which sequester CsrA and antagonize its activity. Here, mRNAs for relA, spoT and dksA of the stringent response system were found among 721 different transcripts that copurified with CsrA. Many of the transcripts that copurified with CsrA were previously determined to respond to ppGpp and/or DksA. We examined multiple regulatory interactions between the Csr and stringent response systems. Most importantly, DksA and ppGpp robustly activated csrB/C transcription (10-fold), while they modestly activated csrA expression. We propose that CsrA-mediated regulation is relieved during the stringent response. Gel shift assays confirmed high affinity binding of CsrA to relA mRNA leader and weaker interactions with dksA and spoT. Reporter fusions, qRT-PCR and immunoblotting showed that CsrA repressed relA expression, and (p)ppGpp accumulation during stringent response was enhanced in a csrA mutant. CsrA had modest to negligible effects on dksA and spoT expression. Transcription of dksA was negatively autoregulated via a feedback loop that tended to mask CsrA effects. We propose that the Csr system fine-tunes the stringent response and discuss biological implications of the composite circuitry.

AphA and LuxR/HapR reciprocally control quorum sensing in vibrios

Bacteria cycle between periods when they perform individual behaviors and periods when they perform group behaviors. These transitions are controlled by a cell-cell communication process called quorum sensing, in which extracellular signal molecules, called autoinducers (AIs), are released, accumulate, and are synchronously detected by a group of bacteria. AI detection results in community-wide changes in gene expression, enabling bacteria to collectively execute behaviors such as bioluminescence, biofilm formation, and virulence factor production. In this study, we show that the transcription factor AphA is a master regulator of quorum sensing that operates at low cell density (LCD) in Vibrio harveyi and Vibrio cholerae. In contrast, LuxR (V. harveyi)/HapR (V. cholerae) is the master regulator that operates at high cell density (HCD). At LCD, redundant small noncoding RNAs (sRNAs) activate production of AphA, and AphA and the sRNAs repress production of LuxR/HapR. Conversely, at HCD, LuxR/HapR represses aphA. This network architecture ensures maximal AphA production at LCD and maximal LuxR/HapR production at HCD. Microarray analyses reveal that 300 genes are regulated by AphA at LCD in V. harveyi, a subset of which is also controlled by LuxR. We propose that reciprocal gradients of AphA and LuxR/HapR establish the quorum-sensing LCD and HCD gene expression patterns, respectively.