Impact of Modifications from Potassium Hydroxide on Porous Semi-IPN Hydrogel Properties and Its Application in Cultivation

This study synthesized and modified a semi-interpenetrating polymer network hydrogel from polyacrylamide, N,N'-dimethylacrylamide, and maleic acid in a potassium hydroxide solution. The chemical composition, interior morphology, thermal properties, mechanical characteristics, and swelling behaviors of the initial hydrogel (SH) and modified hydrogel (SB) in water, salt solutions, and buffer solutions were investigated. Hydrogels were used as phosphate fertilizer (PF) carriers and applied in farming techniques by evaluating their impact on soil properties and the growth of mustard greens. Fourier-transform infrared spectra confirmed the chemical composition of SH, SB, and PF-adsorbed hydrogels. Scanning electron microscopy images revealed that modification increased the largest pore size from 817 to 1513 µm for SH and SB hydrogels, respectively. After modification, the hydrogels had positive changes in the swelling ratio, swelling kinetics, thermal properties, mechanical and rheological properties, PF absorption, and PF release. The modification also increased the maximum amount of PF loaded into the hydrogel from 710.8 mg/g to 770.9 mg/g, while the maximum % release of PF slightly increased from 84.42% to 85.80%. In addition, to evaluate the PF release mechanism and the factors that influence this process, four kinetic models were applied to confirm the best-fit model, which included zero-order, first-order, Higuchi, and Korsmeyer-Peppas. In addition, after six cycles of absorption and release in the soil, the hydrogels retained their original shapes, causing no alkalinization or acidification. At the same time, the moisture content was higher as SB was used. Finally, modifying the hydrogel increased the mustard greens' lifespan from 20 to 32 days. These results showed the potential applications of modified semi-IPN hydrogel materials in cultivation.

The Preparation and Characterization of N,N-Dimethyl Acrylamide-Diallyl Maleate Gel/Hydrogel in a Non-Aqueous Solution

A few drugs need non-aqueous gels for release in the specific region of the intestine. The present work focuses on preparing N,N-Dimethyl acrylamide-Diallyl Maleate (DMAA-DAM) gel in Dimethyl sulfoxide (DMSO) solvent by applying different doses of gamma radiation and then characterization. The blend solution of 10%: 10%-DMAA: DAM was prepared in DMSO and irradiated at 2, 5, 10, 20, and 30 kGy doses from the Co-60 gamma source. After extraction, it was observed that all of the radiation doses yielded more than 95% gel content. The best gel content was found for 10 kGy dose, which was 97%. The equilibrium swelling was optimized 1800% of the dried gel for 5 kGy dose. Gel formation was confirmed by analyzing characteristic functional groups and the environment of protons in the gel structure by using FTIR and NMR spectroscopy. The thermal stability was tested using DSC and TGA which showed the glass transition temperature at 86.55 °C and the degradation started at 320 °C. The XRD pattern analysis revealed the semi-crystalline nature of the gel. Therefore, DMAA-DAM gels can be a good candidate for use in different fields of study, especially in drug delivery.

Hydrogel Nanoarchitectonics: An Evolving Paradigm for Ultrasensitive Biosensing

The integration of nanoarchitectonics and hydrogel into conventional biosensing platforms offers the opportunities to design physically and chemically controlled and optimized soft structures with superior biocompatibility, better immobilization of biomolecules, and specific and sensitive biosensor design. The physical and chemical properties of 3D hydrogel structures can be modified by integrating with nanostructures. Such modifications can enhance their responsiveness to mechanical, optical, thermal, magnetic, and electric stimuli, which in turn can enhance the practicality of biosensors in clinical settings. This review describes the synthesis and kinetics of gel networks and exploitation of nanostructure-integrated hydrogels in biosensing. With an emphasis on different integration strategies of hydrogel with nanostructures, this review highlights the importance of hydrogel nanostructures as one of the most favorable candidates for developing ultrasensitive biosensors. Moreover, hydrogel nanoarchitectonics are also portrayed as a promising candidate for fabricating next-generation robust biosensors.

pH Sensitive Pluronic Acid/Agarose-Hydrogels as Controlled Drug Delivery Carriers: Design, Characterization and Toxicity Evaluation

The objective of this study was to fabricate and evaluate a pH sensitive cross-linked polymeric network through the free radical polymerization technique for the model drug, cyclophosphamide, used in the treatment of non-Hodgkin’s lymphoma. The Hydrogels were prepared using a polymeric blend of agarose, Pluronic acid, glutaraldehyde, and methacrylic acid. The prepared hydrogels were characterized for drug loading (%), swelling pattern, release behavior, the ingredient’s compatibility, structural evaluation, thermal integrity, and toxicity evaluation in rabbits. The new polymer formation was evident from FTIR findings. The percentage loaded into the hydrogels was in the range of 58.65–75.32%. The developed hydrogels showed significant differences in swelling dynamics and drug release behavior in simulated intestinal fluid (SIF) when compared with simulated gastric fluid (SGF). The drug release was persistent and performed in a controlled manner for up to 24 h. A toxicity study was conducted on white albino rabbits. The developed hydrogels did not show any signs of ocular, skin, or oral toxicity; therefore, these hydrogels can be regarded as safe and potential carriers for controlled drug delivery in biomedical applications.

Preparation and characterization of polysulfone-polyurethane membranes for recovery of simulated wastewater from industrial textile processes

Techniques using membranes for the treatment of wastewaters usually promote higher quality of treated water when compared to other processes. Among them, pervaporation has advantages in terms of selectivity in addition to low working pressure, which can prevent clogging problems. Polysulfone and polyurethane have complementary characteristics and are interesting in the context of membranes for industrial applications. In this sense, the aim of this work was to prepare and characterize polysulfone/polyurethane-based membranes and tested them with a simulated wastewater containing the reactive black dye and sodium chloride by pervaporation. In their manufacture, thermal treatment (at 60°C) and photo-radiation treatment (using ultraviolet light) were also applied. The characterizations were performed using different analytical tools. In general, it was possible to verify that all membranes have a dense layer. The thermal analysis allowed to define that the indicated working temperature is below 50°C. With respect to the simulated wastewater treatment, all membranes reached 100% selectivity. Concerning the saline solution, the mean selectivity was around 98.5%. Moreover, the permeate flow values were within the range presented by commercial membranes ranging from 1.6 to 2.4 kg m^-2 h^-1. Although for the photoirradiated membranes the photo-graft reaction has occurred, among all membranes, the blend without any treatment stood out from the others, presenting the highest permeate flow of the simulated wastewater. Finally, the results reveal that these membranes are capable of recovering wastewater from textile processes, in addition to having the potential to remove salts from water through the pervaporation process.Highlights Polysulfone/polyurethane-based membranes were not yet evaluated for wastewater recovery.Modifications in the membrane characteristics promoted variations in the permeate flow.Changes in physical-chemical properties of membrane as a result of a photoinitiation reaction.Removal efficiency achieved was 100% for reactive black dye and 98.5% for sodium chloride.A new way of performing pervaporation on the recovery of aqueous solutions.

Preparation, Properties and Potential of Carrageenan-Based Hard Capsules for Replacing Gelatine: A Review

Intense efforts to develop alternative materials for gelatine as a drug-delivery system are progressing at a high rate. Some of the materials developed are hard capsules made from alginate, carrageenan, hypromellose and cellulose. However, there are still some disadvantages that must be minimised or eliminated for future use in drug-delivery systems. This review attempts to review the preparation and potential of seaweed-based, specifically carrageenan, hard capsules, summarise their properties and highlight their potential as an optional main component of hard capsules in a drug-delivery system. The characterisation methods reviewed were dimensional analysis, water and ash content, microbial activity, viscosity analysis, mechanical analysis, scanning electron microscopy, swelling degree analysis, gel permeation chromatography, Fourier-transform infrared spectroscopy and thermal analysis. The release kinetics of the capsule is highlighted as well. This review is expected to provide insights for new researchers developing innovative products from carrageenan-based hard capsules, which will support the development goals of the industry.

Development of a 3D printable and highly stretchable ternary organic-inorganic nanocomposite hydrogel

Hydrogels that can be processed with additive manufacturing techniques and concomitantly possess favorable mechanical properties are interesting for many advanced applications. However, the development of novel ink materials with high intrinsic 3D printing performance has been proven to be a major challenge. Herein, a novel 3D printable organic-inorganic hybrid hydrogel is developed from three components, and characterized in detail in terms of rheological property, swelling behavior and composition. The nanocomposite hydrogel combines a thermoresponsive hydrogel with clay LAPONITE® XLG and in situ polymerized poly(N,N-dimethylacrylamide). Before in situ polymerization, the thermogelling and shear thinning properties of the thermoresponsive hydrogel provides a system well-suited for extrusion-based 3D printing. After chemical curing of the 3D-printed constructs by free radical polymerization, the resulting interpenetrating polymer network hydrogel shows excellent mechanical strength with a high stretchability to a tensile strain at break exceeding 550%. Integrating with the advanced 3D-printing technique, the introduced material could be interesting for a wide range of applications including tissue engineering, drug delivery, soft robotics and additive manufacturing in general.

Superabsorbent Hydrogels Based to Polyacrylamide/Cashew Tree Gum for the Controlled Release of Water and Plant Nutrients

Agricultural production is influenced by the water content in the soil and availability of fertilizers. Thus, superabsorbent hydrogels, based on polyacrylamide, natural cashew tree gum (CG) and potassium hydrogen phosphate (PHP), as fertilizer and water releaser were developed. The structure, morphology, thermal stability and chemical composition of samples of polyacrylamide and cashew tree gum hydrogels with the presence of fertilizer (HCGP) and without fertilizer (HCG) were investigated, using X-ray diffractometry (XRD), Fourier Transformed Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA/DTG) and Energy Dispersive Spectroscopy (EDS). Swelling/reswelling tests, textural analysis, effect of pH, release of nutrients and kinetics were determined; the ecotoxicity of the hydrogels was investigated by the Artemia salina test. The results showed that PHP incorporation in the hydrogel favored the crosslinking of chains. This increased the thermal stability in HCGP but decreased the hardness and adhesion properties. The HCGP demonstrated good swelling capacity (~15,000 times) and an excellent potential for reuse after fifty-five consecutive cycles. The swelling was favored in an alkaline pH due to the ionization of hydrophilic groups. The sustained release of phosphorus in HCGP was described by the Korsmeyer-Peppas model, and Fickian diffusion is the main fertilizer release mechanism. Finally, the hydrogels do not demonstrate toxicity, and HCGP has potential for application in agriculture.

Swelling behavior of poly (N-hydroxymethylacrylamide-co-acrylic acid) hydrogels and release of potassium nitrate as fertilizer

Poly (N-hydroxymethylacrylamide-co-acrylic acid) [P(NHMA-AAx)] hydrogels were prepared by free-radical polymerization in aqueous solution at 56°C, using N,N′-methylenebisacrylamide as the cross-linking agent. The synthesized hydrogels were subsequently investigated by a series of characterization techniques including Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis and differential scanning calorimetry analysis. The effects of comonomer composition in the feed, pH, temperature and ionic strength on the swelling behavior were studied. Results indicated that the swelling capabilities of P(NHMA-AAx) hydrogels decreased with the increase in N-hydroxymethylacrylamide (NHMA) content in the polymeric matrix and ionic strength of the medium. Additionally, the hydrogels showed both temperature and pH responses. The dynamic swelling behaviors of hydrogels at different pH values followed a non-Fickian type. The P(NHMA-AAx) hydrogels were also loaded with potassium nitrate (KNO3) as a model agrochemical, and the release kinetics of fertilizer from the hydrogels was studied as a function of KNO3 and NHMA concentrations. Moreover, various kinetic parameters, such as release exponents and diffusion coefficients, were calculated.

Effect of crosslinking concentration on properties of 3-(trimethoxysilyl) propyl methacrylate/N-vinyl pyrrolidone gels

BACKGROUND

The incorporation of two different monomers, having different properties, in the same polymer molecule leads to the formation of new materials with great scientific and commercial importance. The basic requirements for polymeric materials in some areas of biomedical applications are that they are hydrophilic, having good mechanical and thermal properties, soft, and oxygen-permeable.

RESULTS

A series of 3-(trimethoxysilyl) propyl methacrylate/N-vinyl pyrrolidone (TMSPM/NVP) xerogels containing different concentration of ethylene glycol dimethacrylate (EGDMA) as crosslinking agent were prepared by bulk polymerization to high conversion using BPO as initiator. The copolymers were characterized by FTIR. The corresponding hydrogels were obtained by swelling the xerogels in deionized water to equilibrium. Addition of EGDMA increases the transparency of xerogels and hydrogels. The minimum amount of EGDMA required to produce a transparent xerogel is 1%. All the Swelling parameters, including water content (EWC), volume fraction of polymer (ϕ₂) and weight loss during swelling decrease with increasing EGDMA. Young's and shear modulus (E and G) increase as EGDMA increases. The hydrogels were characterized in terms of modulus cross-linking density (v _e and v _t ) and polymer-solvent interaction parameters (χ). Thermal properties include TGA and glass transition temperature (T_g) enhance by adding EGDMA whereas the oxygen permeability (P) of hydrogels decreases as water content decrease.

CONCLUSIONS

This study prepared and studied the properties for new copolymer (TMSPM-co-NVP) contains different amounts of (EGDMA). These copolymers possess new properties with potential use in different biomedical applications. The properties of the prepared hydrogels are fit with the standard properties of materials which should be used for contact lenses.

Dual-pH/Magnetic-Field-Controlled Drug Delivery Systems Based on Fe3 O4 @SiO2 -Incorporated Salecan Graft Copolymer Composite Hydrogels

Salecan is a water-soluble extracellular β-glucan and has excellent physicochemical and biological properties for hydrogel preparation. In this study, a new pH/magnetic field dual-responsive hydrogel was prepared by the graft copolymerization of salecan with 4-pentenoic acid (PA) and N-hydroxyethylacrylamide (HEAA) in the presence of Fe₃ O₄ @SiO₂ nanoparticles for doxorubicin hydrochloride (DOX) release. Integration of Fe₃ O₄ @SiO₂ nanoparticles in salecan-g-poly(PA-co-HEAA) copolymers afforded magnetic sensitivity to the original material. DOX-loaded hydrogels exhibited a clear capacity for pH/magnetic field dual-responsive controlled drug release. Lowering the pH to acidic conditions or introducing an external magnetic field caused an enhancement in DOX release. This salecan-g-poly(PA-co-HEAA)/Fe₃ O₄ @SiO₂ composite hydrogel is a promising drug carrier for magnetically targeted drug delivery with enhanced DOX cytotoxicity against A549 cells.

One-pot synthesis of pH-responsive hybrid nanogel particles for the intracellular delivery of small interfering RNA

This report describes a novel, one-pot synthesis of hybrid nanoparticles formed by a nanostructured inorganic silica core and an organic pH-responsive hydrogel shell. This easy-to-perform, oil-in-water emulsion process synthesizes fluorescently-doped silica nanoparticles wrapped within a tunable coating of cationic poly(2-diethylaminoethyl methacrylate) hydrogel in one step. Transmission electron microscopy and dynamic light scattering analysis demonstrated that the hydrogel-coated nanoparticles are uniformly dispersed in the aqueous phase. The formation of covalent chemical bonds between the silica and the polymer increases the stability of the organic phase around the inorganic core as demonstrated by thermogravimetric analysis. The cationic nature of the hydrogel is responsible for the pH buffering properties of the nanostructured system and was evaluated by titration experiments. Zeta-potential analysis demonstrated that the charge of the system was reversed when transitioned from acidic to basic pH and vice versa. Consequently, small interfering RNA (siRNA) can be loaded and released in an acidic pH environment thereby enabling the hybrid particles and their payload to avoid endosomal sequestration and enzymatic degradation. These nanoparticles, loaded with specific siRNA molecules directed towards the transcript of the membrane receptor CXCR4, significantly decreased the expression of this protein in a human breast cancer cell line (i.e., MDA-MB-231). Moreover, intravenous administration of siRNA-loaded nanoparticles demonstrated a preferential accumulation at the tumor site that resulted in a reduction of CXCR4 expression.