The Role of 3D Printing in Medical Applications: A State of the Art. J Healthc Eng. 2019;2019:5340616. [PMID: 31019667 PMCID: PMC6451800 DOI: 10.1155/2019/5340616]

Post-printing processing and aging effects on Polyjet materials intended for the fabrication of advanced surgical simulators

Material Jetting (MJ) 3D printing technology is promising for the fabrication of highly realistic surgical simulators, however, the changes in the mechanical properties of MJ materials after post-printing treatments and over time remain quite unknown. In this study, we investigate the effect of different post-printing processes and aging on the mechanical properties of a white opaque and rigid MJ photopolymer, a white flexible MJ photopolymer and on a combination of them. Tensile and Shore hardness tests were conducted on homogeneous 3D-printed specimens: two different post-printing procedures for support removal (dry and water) and further surface treatment (with glycerol solution) were compared. The specimens were tested within 48 h from printing and after aging (30-180 days) in a controlled environment. All groups of specimens treated with different post-printing processes (dry, water, glycerol) exhibited a statistically significant difference in mechanical properties (i.e. elongation at break, elastic modulus, ultimate tensile strength). Particularly, the treatment with glycerol makes the flexible photopolymer more rigid, but then with aging the initial elongation of the material tends to be restored. For the rigid photopolymer, an increase in deformability was observed as a major effect of aging. The hardness tests on the printed specimens highlighted a significant overestimation of the Shore values declared by the manufacturer. The study findings are useful for guiding the material selection and post-printing processing techniques to manufacture realistic and durable models for surgical training.

3D printed temporal bones for preoperative simulation and planning

OBJECTIVE

Demonstrate the utility of 3D printed temporal bone models in individual patient preoperative planning and simulation.

METHODS

3D models of the temporal bone were made from 5 pediatric and adult patients at a tertiary academic hospital with challenging surgical anatomy planned for cochlear implantation or exteriorization of cholesteatoma with complex labyrinthine fistula. The 3D models were created from CT scan used for preoperative planning, simulation and intraoperative reference. The utility of models was assessed for ease of segmentation and production and impact on surgery in regard to reducing intraoperative time and costs, improving safety and efficacy.

RESULTS

Three patients received cochlear implants, two exteriorization of advanced cholesteatoma with fistulas (1 internal auditory canal/cochlea, 1 all three semicircular canals). Surgical planning and intraoperative referencing to the simulations by the attending surgeon and trainees significantly altered original surgical plans. In a case of X-linked hereditary deafness, optimal angles and rotation maneuvers for cochlear implant insertion reduced operating time by 93 min compared to the previous contralateral side surgery. Two cochlear implant cases planned for subtotal petrosectomy approach due to aberrant anatomy were successfully approached through routine mastoidectomy. The cholesteatoma cases were successfully exteriorized without necessitating partial labyrinthectomy or labyrinthine injury. There were no complications.

CONCLUSION

3D printed models for simulation training, surgical planning and use intraoperatively in temporal bone surgery demonstrated significant benefits in designing approaches, development of patient-specific techniques, avoidance of potential or actual complications encountered in previous or current surgery, and reduced surgical time and costs.

Enhancing parental understanding of congenital heart disease through personalized prenatal counseling with 3D printed hearts

OBJECTIVES

In addition to a correct prenatal diagnosis of congenital heart disease (CHD), comprehensive parental counseling is crucial to ensure that parents are well-informed about the condition of the fetus. This study aims to investigate whether there is a significant difference in the information acquired by parents through traditional counseling, utilizing 2-dimensional (2D) illustrations and images, compared to an advanced approach utilizing personalized three-dimensional (3D) printed models of the fetal heart developed from 3D ultrasound imaging.

METHODS

This study, designed as a pilot randomized control trial, enrolled pregnant women with gestational ages greater than 18 weeks, whose fetuses were diagnosed with CHD and referred to our center between November, 2020 and June, 2021. Two groups of patients were included in the study. The first group received standard medical counseling with 2D images and illustrations, while the second group underwent advanced counseling with 3D-printed patient-specific heart models. Both groups were then required to complete the same survey in which the knowledge of the CHD was investigated. The 3D models were created from 3D ultrasound imaging and printed using resin materials in both 1:1 and 5:1 scale.

RESULTS

A comparison of the scores obtained from the two groups revealed that 3D visualization of the fetus's heart has the potential to increase parental knowledge about CHD and the required surgical procedures. Furthermore, all couples expressed interest in receiving a 1:1 scale model of their baby's heart.

CONCLUSION

Personalized prenatal counseling with 3D-ultrasound-based heart models positively impacts parents' understanding of CHD. The use of 3D models provides a more comprehensive and accessible representation of the condition, contributing to an increased knowledge gain, and potentially helping to support informed decisions regarding their child's care.

Avastin-Loaded 3D-Printed Alginate Scaffold as an Effective Antiadhesive Barrier to Prevent Postsurgical Adhesion Bands Formation

Postoperative adhesion can cause complications, such as pain and organ blockage, in the abdominal regions. To address this issue, surgical techniques and antiadhesive treatments are applied. Given the significant role of vascularization in adhesion band formation, Avastin (Ava) that targets vascular endothelial growth factor (VEGF) can be applied to prevent peritoneal adhesion bands. Moreover, Alginate (Alg), a natural polysaccharide, is a promising physical barrier to prevent adhesion bands. Incorporating Ava into Alg hydrogel in a form of 3D-printed scaffold (Alg/Ava) has potential to suppress inflammation and angiogenesis, leading to reduce peritoneal adhesion bands. Following physical, morphological, and biocompatibility evaluations, the efficacy of Alg and Ava alone and their combination in Alg/Ava on the formation of postsurgical adhesions is evaluated. Upon confirming physical stability and sustained release of Ava, the Alg/Ava scaffold effectively diminishes both the extent and strength of adhesion bands. Histopathological examination shows that the reduction in fibrosis and inflammation is responsible for preventing adhesion bands by the Alg/Ava scaffold. Additionally, the cytokine assessment reveals that this is due to the inhibition in the secretion of VEGF and Interleukin 6 suppressing vascularization and inflammatory pathways. This study suggests that a 3D-printed Alg/Ava scaffold has great potential to prevent the postsurgical adhesion bands.

The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys

In this article, the results of research on a NiTi alloy with a high nickel content (51.7 at.%), produced using the additive technology SLM method and subjected to isothermal ageing after solution annealing, are presented. The study involved the determination of the sequence of phase transformations occurring using differential scanning calorimetry (DSC) and the determination of the temperature range of these transformations. In parallel, the phase composition was determined using the XRD method; the hardness and the Young's modulus were also determined. The analysis of the DSC results obtained indicates the following characteristic features of the NiTi alloy, which change with ageing time: (1) During cooling (from +150 °C to -50 °C), the type of transformation changes from a one-step transformation after solution annealing to a two-step transformation after the ageing process over 1, 20, and 100 h at 500 °C; (2) during heating (from -50 °C to +150 °C) for all the samples, regardless of the ageing time, only a one-step transformation from martensite M(B19') to austenite A(B2) is observed; (3) the temperature at which the transformation starts increases with the ageing time; (4) the width of the total temperature range of the transformation M(B19') → A(B2) during heating changes from large (ΔT = 49.7 °C), after solution annealing, to narrow (ΔT = 19.3 °C and ΔT = 17.9 °C after 20 h and 100 h of ageing); and, most importantly, (5) a comparison with the literature data shows that, irrespective of the composition of the NiTi alloy and the manufacturing technology of the alloy samples (regardless of whether this was traditional or additive technology), a sufficiently long ageing process period leads to the occurrence of the martensite → austenite transformation in the same temperature range.

Optimizing tensile strength and energy consumption for FDM through Mixed-Integer Nonlinear Multi-objective optimization and design of experiments

This study presents a methodology for optimizing key parameters of a fused deposition modeling (FDM) printer to minimize energy consumption (EC) while exceeding a specified tensile strength (TS) threshold. Employing Design of Experiments (DoE) with Taguchi and Response Surface analysis, we identify influential parameters affecting TS and EC. A Mixed-Integer Nonlinear Multi-Objective Optimization model is then utilized to balance TS and EC, resulting in optimal parameter values. Validation using fabricated specimens demonstrates less than 5 % error in Tensile Strength and less than 2 % error in Energy Consumption, confirming the efficacy of the proposed methodology.

Dimensional accuracy and simulation-based optimization of polyolefins and biocopolyesters for extrusion-based additive manufacturing and steam sterilization

Polyolefins exhibit robust mechanical and chemical properties and can be applied in the medical field, e.g. for the manufacturing of dentures. Despite their wide range of applications, they are rarely used in extrusion-based printing due to their warpage tendency. The aim of this study was to investigate and reduce the warpage of polyolefins compared to commonly used filaments after additive manufacturing (AM) and sterilization using finite element simulation. Three types of filaments were investigated: a medical-grade polypropylene (PP), a glass-fiber reinforced polypropylene (PP-GF), and a biocopolyester (BE) filament, and they were compared to an acrylic resin (AR) for material jetting. Square specimens, standardized samples prone to warpage, and denture bases (n = 10 of each group), as clinically relevant and anatomically shaped reference, were digitized after AM and steam sterilization (134 °C). To determine warpage, the volume underneath the square specimens was calculated, while the deviations of the denture bases from the printing file were measured using root mean square (RMS) values. To reduce the warpage of the PP denture base, a simulation of the printing file based on thermomechanical calculations was performed. Statistical analysis was conducted using the Kruskal-Wallis test, followed by Dunn's test for multiple comparisons. The results showed that PP exhibited the greatest warpage of the square specimens after AM, while PP-GF, BE, and AR showed minimal warpage before sterilization. However, warpage increased for PP-GF, BE and AR during sterilization, whereas PP remained more stable. After AM, denture bases made of PP showed the highest warpage. Through simulation-based optimization, warpage of the PP denture base was successfully reduced by 25%. In contrast to the reference materials, PP demonstrated greater dimensional stability during sterilization, making it a potential alternative for medical applications. Nevertheless, reducing warpage during the cooling process after AM remains necessary, and simulation-based optimization holds promise in addressing this issue.

3D Printing for the Development of Palatal Defect Prosthetics

Background

Three-dimensional (3D) printing has emerged as a promising new technology for the development of surgical prosthetics. Research in orthopedic surgery has demonstrated that using 3D printed customized prosthetics results in more precise implant placements and better patient outcomes. However, there has been little research on implementing customized 3D printed prosthetics in otolaryngology. The program sought to determine whether computed tomography (CT) serves as feasible templates to construct 3D printed palatal obturator prosthetics for defects in patients who have been treated for head and neck cancers.

Observations

A retrospective review of patients with palatal defects was conducted and identified 1 patient with high quality CTs compatible with 3D modeling. CTs of the patient's craniofacial anatomy were used to develop a 3D model and a Formlabs 3B+ printer printed the palatal prosthetic. We successfully developed and produced an individualized prosthetic using CTs from a veteran with head and neck deformities caused by cancer treatment who was previously treated at the Veterans Affairs Palo Alto Health Care System. This project was successful in printing patient-specific implants using CT reproductions of the patient's craniofacial anatomy, particularly of the palate. The program was a proof of concept and the implant we created was not used on the patient.

Conclusions

Customized 3D printed implants may allow otolaryngologists to enhance the performance and efficiency of surgeries and better rehabilitate and reconstruct craniofacial deformities to restore appearance and function to patients. Additional research will strive to enhance the therapeutic potential of these prosthetics to serve as low-cost, patient-specific implants.

Development and validation of 3-dimensional simulators for penile prosthesis surgery

BACKGROUND

The acquisition of skills in penile prosthesis surgery has many limitations mainly due to the absence of simulators and models for training. Three-dimensional (3D) printed models can be utilized for surgical simulations, as they provide an opportunity to practice before entering the operating room and provide better understanding of the surgical approach.

AIM

This study aimed to evaluate and validate a 3D model of human male genitalia for penile prosthesis surgery.

METHODS

This study included 3 evaluation and validation stages. The first stage involved verification of the 3D prototype model for anatomic landmarks compared with a cadaveric pelvis. The second stage involved validation of the improved model for anatomic accuracy and teaching purposes with the Rochester evaluation score. The third stage comprised validation of the suitability of the 3D prototype model as a surgical simulator and for skill acquisition. The third stage was performed at 3 centers using a modified version of a pre-existing, validated questionnaire and correlated with the Rochester evaluation score.

OUTCOME

We sought to determine the suitability of 3D model for training in penile prosthesis surgery in comparison with the available cadaveric model.

RESULTS

The evaluation revealed a high Pearson correlation coefficient (0.86) between questions of the Rochester evaluation score and modified validated questionnaire. The 3D model scored 4.33 ± 0.57 (on a Likert scale from 1 to 5) regarding replication of the relevant human anatomy for the penile prosthesis surgery procedure. The 3D model scored 4.33 ± 0.57 (on a Likert scale from 1 to 5) regarding its ability to improve technical skills, teach and practice the procedure, and assess a surgeon's ability. Furthermore, the experts stated that compared with the cadaver, the 3D model presented greater ethical suitability, reduced costs, and easier accessibility.

CLINICAL IMPLICATIONS

A validated 3D model is a suitable alternative for penile prosthesis surgery training.

STRENGTHS AND LIMITATIONS

This is the first validated 3D hydrogel model for penile prosthesis surgery teaching and training that experts consider suitable for skill acquisition. Because specific validated guidelines and questionnaires for the validation and verifications of 3D simulators for penile surgery are not available, a modified questionnaire was used.

CONCLUSION

The current 3D model for penile prosthesis surgery shows promising results regarding anatomic properties and suitability to train surgeons to perform penile implant surgery. The possibility of having an ethical, easy-to-use model with lower costs and limited consequences for the environment is encouraging for further development of the models.

Metacarpophalangeal joint reconstruction using a costal osteochondral graft: A case report

RATIONALE

The conventional treatment of giant cell tumors is intralesional curettage with local adjuvant therapy. Because hand tumors have a high local recurrence, the primary goal for treating tumors of the hand is to eradicate the lesion.

PATIENT CONCERNS

To preserve the metacarpophalangeal (MCP) joint function as well as avoid further recurrence after surgery.

DIAGNOSES

The giant cell tumor invades the patient's MCP joint in an index proximal phalanx.

INTERVENTIONS

Using computer-aided design and three-dimensional printing techniques, we reformed the original shapes of the MCP joint and its peripheral bone to replica models. The surgeon then performed an en bloc resection and proximal phalanx with MCP joint reconstruction by fabricating the patient's costal osteochondral graft during the operation.

OUTCOMES

After 6 months of rehabilitation, the patient's finger functions could pinch and grasp objects naturally. At the 1-year follow-up, the range of motion of the MCP, proximal interphalangeal, and distal interphalangeal joints improved from flexion of 35° to 60°, 75° to 85°, and 60° to 80°, respectively. The hand function achieved the mean performance of non-preferred hands for young females at the postoperative 3-year follow-up.

LESSONS

The customized prototyping technique has the potential to replica the original patient's bony graft to reach the goal of minimizing the defects at the donor site and maximizing the function of the reconstructed MCP joint.

Recent advances in implantable sensors and electronics using printable materials for advanced healthcare

This review article focuses on the recent printing technological progress in healthcare, underscoring the significant potential of implantable devices across diverse applications. Printing technologies have widespread use in developing health monitoring devices, diagnostic systems, and surgical devices. Recent years have witnessed remarkable progress in fabricating low-profile implantable devices, driven by advancements in printing technologies and nanomaterials. The importance of implantable biosensors and bioelectronics is highlighted, specifically exploring printing tools using bio-printable inks for practical applications, including a detailed examination of fabrication processes and essential parameters. This review also justifies the need for mechanical and electrical compatibility between bioelectronics and biological tissues. In addition to technological aspects, this article delves into the importance of appropriate packaging methods to enhance implantable devices' performance, compatibility, and longevity, which are made possible by integrating cutting-edge printing technology. Collectively, we aim to shed light on the holistic landscape of implantable biosensors and bioelectronics, showcasing their evolving role in advancing healthcare through innovative printing technologies.

Fabricating patient-specific 3D printed drill guides to treat femoral head avascular necrosis

BACKGROUND

Femoral head avascular necrosis (AVN), or death of femoral head tissue due to a lack of blood supply, is a leading cause of total hip replacement for non-geriatric patients. Core decompression (CD) is an effective treatment to re-establish blood flow for patients with AVN. Techniques aimed at improving its efficacy are an area of active research. We propose the use of 3D printed drill guides to accurately guide therapeutic devices for CD.

METHODS

Using femur sawbones, image processing software, and 3D modeling software, we created a custom-built device with pre-determined drill trajectories and tested the feasibility of the 3D printed drill guides for CD. A fellowship trained orthopedic surgeon used the drill guide to position an 8 ga, 230 mm long decompression device in the three synthetic femurs. CT scans were taken of the sawbones with the drill guide and decompression device. CT scans were processed in the 3D modeling software. Descriptive statistics measuring the angular and needle-tip deviation were compared to the original virtually planned model.

RESULTS

Compared to the original 3D model, the trials had a mean displacement of 1.440 ± 1.03 mm and a mean angle deviation of 1.093 ± 0.749º.

CONCLUSIONS

The drill guides were demonstrated to accurately guide the decompression device along its predetermined drill trajectory. Accuracy was assessed by comparing values to literature-reported values and considered AVN lesion size. This study demonstrates the potential use of 3D printing technology to improve the efficacy of CD techniques.

Accuracy of additively manufactured and steam sterilized surgical guides by means of continuous liquid interface production, stereolithography, digital light processing, and fused filament fabrication

Different printing technologies can be used for prosthetically oriented implant placement, however the influence of different printing orientations and steam sterilization remains unclear. In particular, no data is available for the novel technology Continuous Liquid Interface Production. The objective was to evaluate the dimensional accuracy of surgical guides manufactured with different printing techniques in vertical and horizontal printing orientation before and after steam sterilization. A total of 80 surgical guides were manufactured by means of continuous liquid interface production (CLIP; material: Keyguide, Keyprint), digital light processing (DLP; material: Luxaprint Ortho, DMG), stereolithography (SLA; Surgical guide, Formlabs), and fused filament fabrication (FFF; material: Clear Base Support, Arfona) in vertical and horizontal printing orientation (n = 10 per subgroup). Spheres were included in the design to determine the coordinates of 17 reference points. Each specimen was digitized with a laboratory scanner after additive manufacturing (AM) and after steam sterilization (134 °C). To determine the accuracy, root mean square values (RMS) were calculated and coordinates of the reference points were recorded. Based on the measured coordinates, deviations of the reference points and relevant distances were calculated. Paired t-tests and one-way ANOVA were applied for statistical analysis (significance p < 0.05). After AM, all printing technologies showed comparable high accuracy, with an increased deviation in z-axis when printed horizontally. After sterilization, FFF printed surgical guides showed distinct warpage. The other subgroups showed no significant differences regarding the RMS of the corpus after steam sterilization (p > 0.05). Regarding reference points and distances, CLIP showed larger deviations compared to SLA in both printing orientations after steam sterilization, while DLP manufactured guides were the most dimensionally stable. In conclusion, the different printing technologies and orientations had little effect on the manufacturing accuracy of the surgical guides before sterilization. However, after sterilization, FFF surgical guides exhibited significant deformation making their clinical use impossible. CLIP showed larger deformations due to steam sterilization than the other photopolymerizing techniques, however, discrepancies may be considered within the range of clinical acceptance. The influence on the implant position remains to be evaluated.

Medical, pharmaceutical, and nutritional applications of 3D-printing technology in diabetes

AIMS

Despite numerous studies covering the various features of three-dimensional printing (3D printing) technology, and its applications in food science and disease treatment, no study has yet been conducted to investigate applying 3D printing in diabetes. Therefore, the present study centers on the utilization and impact of 3D printing technology in relation to the nutritional, pharmaceutical, and medicinal facets of diabetes management. It highlights the latest advancements, and challenges in this field.

METHODS

In this review, the articles focusing on the application and effect of 3D printing technology on medical, pharmaceutical, and nutritional aspects of diabetes management were collected from different databases.

RESULT

High precision of 3D printing in the placement of cells led to accurate anatomic control, and the possibility of bio-printing pancreas and β-cells. Transdermal drug delivery via 3D-printed microneedle (MN) patches was beneficial for the management of diabetes disease. 3D printing supported personalized medicine for Diabetes Mellitus (DM). For instance, it made it possible for pharmaceutical companies to manufacture unique doses of medications for every diabetic patient. Moreover, 3D printing allowed the food industry to produce high-fiber and sugar-free products for the individuals with DM.

CONCLUSIONS

In summary, applying 3D printing technology for diabetes management is in its early stages, and needs to be matured and developed to be safely used for humans. However, its rapid progress in recent years showed a bright future for the treatment of diabetes.

Three-dimensional printing of the human lung pleural cavity model for PDT malignant mesothelioma

OBJECTIVE

The primary aim was to investigate emerging 3D printing and optical acquisition technologies to refine and enhance photodynamic therapy (PDT) dosimetry in the management of malignant pleural mesothelioma (MPM).

MATERIALS AND METHODS

A rigorous digital reconstruction of the pleural lung cavity was conducted utilizing 3D printing and optical scanning methodologies. These reconstructions were systematically assessed against CT-derived data to ascertain their accuracy in representing critical anatomic features and post-resection topographical variations.

RESULTS

The resulting reconstructions excelled in their anatomical precision, proving instrumental translation for precise dosimetry calculations for PDT. Validation against CT data confirmed the utility of these models not only for enhancing therapeutic planning but also as critical tools for educational and calibration purposes.

CONCLUSION

The research outlined a successful protocol for the precise calculation of light distribution within the complex environment of the pleural cavity, marking a substantive advance in the application of PDT for MPM. This work holds significant promise for individualizing patient care, minimizing collateral radiation exposure, and improving the overall efficiency of MPM treatments.

Approximation of extracted features enabling 3D design tuning for reproducing the mechanical behaviour of biological soft tissues

This article describes a new method, inspired by machine learning, to mimic the mechanical behaviour of target biological soft tissues with 3D printed materials. The principle is to optimise the structure of a 3D printed composite consisting of a geometrically tunable fibre embedded in a soft matrix. Physiological features are extracted from experimental stress-strain curves of several biological soft tissues. Then, using a cubic Bézier curve as the composite inner fibre, we optimised its geometric parameters, amplitude and height, to generate a specimen that exhibits a stress-strain curve in accordance with the extracted features of tensile tests. From this first phase, we created a database of specimen geometries that can be used to reproduce a wide variety of biological soft tissues. We applied this process to two soft tissues with very different behaviours: the mandibular periosteum and the calvarial periosteum. The results show that our method can successfully reproduce the mechanical behaviour of these tissues. This highlights the versatility of this approach and demonstrates that it can be extended to mimic various biological soft tissues.

3D printed PLGA scaffold with nano-hydroxyapatite carrying linezolid for treatment of infected bone defects

BACKGROUND

Linezolid has been reported to protect against chronic bone and joint infection. In this study, linezolid was loaded into the 3D printed poly (lactic-co-glycolic acid) (PLGA) scaffold with nano-hydroxyapatite (HA) to explore the effect of this composite scaffold on infected bone defect (IBD).

METHODS

PLGA scaffolds were produced using the 3D printing method. Drug release of linezolid was analyzed by elution and high-performance liquid chromatography assay. PLGA, PLGA-HA, and linezolid-loaded PLGA-HA scaffolds, were implanted into the defect site of a rabbit radius defect model. Micro-CT, H&E, and Masson staining, and immunohistochemistry were performed to analyze bone infection and bone healing. Evaluation of viable bacteria was performed. The cytocompatibility of 3D-printed composite scaffolds in vitro was detected using human bone marrow mesenchymal stem cells (BMSCs). Long-term safety of the scaffolds in rabbits was evaluated.

RESULTS

The linezolid-loaded PLGA-HA scaffolds exhibited a sustained release of linezolid and showed significant antibacterial effects. In the IBD rabbit models implanted with the scaffolds, the linezolid-loaded PLGA-HA scaffolds promoted bone healing and attenuated bone infection. The PLGA-HA scaffolds carrying linezolid upregulated the expression of osteogenic genes including collagen I, runt-related transcription factor 2, and osteocalcin. The linezolid-loaded PLGA-HA scaffolds promoted the proliferation and osteogenesis of BMSCs in vitro via the PI3K/AKT pathway. Moreover, the rabbits implanted with the linezolid-loaded scaffolds showed normal biochemical profiles and normal histology, which suggested the safety of the linezolid-loaded scaffolds.

CONCLUSION

Overall, the linezolid-loaded PLGA-HA scaffolds fabricated by 3D printing exerts significant bone repair and anti-infection effects.

Children's Oncology Group's 2023 blueprint for research: Surgery

Surgery plays a crucial role in the treatment of children with solid malignancies. A well-conducted operation is often essential for cure. Collaboration with the primary care team is important for determining if and when surgery should be performed, and if performed, an operation must be done in accordance with well-established standards. The long-term consequences of surgery also need to be considered. Indications and objectives for a procedure vary. Providing education and developing and analyzing new research protocols that include aims relevant to surgery are key objectives of the Surgery Discipline of the Children's Oncology Group. The critical evaluation of emerging technologies to ensure safe, effective procedures is another key objective. Through research, education, and advancing technologies, the role of the pediatric surgeon in the multidisciplinary care of children with solid malignancies will continue to evolve.

Semisolid extrusion 3D printing of Dolutegravir-Chitosan nanoparticles laden polymeric buccal films: personalized solution for pediatric treatment

In this work, the semi solid extrusion 3D printing process was utilized to incorporate anti-HIV drug Dolutegravir and its nanoparticles into the buccal film (BF) that was fabricated using the developed polymer ink. The composite made of polyvinyl alcohol (PVA) and sodium alginate was processed into a 3D printing polymer ink with optimum viscosity (9587 ± 219 cP) needed for the seamless extrusion through the nozzle of the 3D printer. The formulated BFs were assessed for its physical properties like weight (0.414 ± 0.3 g), thickness (1.54 ± 0.02 mm), swelling index (18.5 ± 0.91%), and mucoadhesiveness strength (0.165 ± 0.09 N) etc, The structural integrity and the surface morphology of the developed BFs were investigated by scanning electron microscopy analysis. The chemical stability and the solid-state nature of the drug in the BFs were assessed by Fourier transform infrared and x-ray diffraction analysis respectively. Further the BFs were assessed for drug dissolutionin-vitroandex-vivo, to study the effect of polymer composition and printing condition on the dissolution profile of the drug in the simulated salivary fluid. The results demonstrated that the developed PVA based polymer ink for 3D printing utilizing pressure is a versatile approach in the context of manufacturing mucoadhesive BFs customized in terms of shape and the amount of drug loaded.

Comparison of three-dimensional printed patient-specific guides versus freehand approach for radial osteotomies in normal dogs: Ex vivo model

OBJECTIVE

To compare the accuracy of three-dimensional (3D) printed patient-specific guide (PSG) with a freehand (FH) approach for radial osteotomies in ex vivo normal dogs.

STUDY DESIGN

Experimental study.

ANIMALS

Twenty four ex vivo thoracic limb pairs from normal beagle dogs.

METHODS

Computed tomography (CT) images were collected preoperatively and postoperatively. Three osteotomies tested (n = 8/group) were: (1) uniplanar 30° frontal plane wedge ostectomy, (2) oblique plane (30° frontal, 15° sagittal) wedge ostectomy, and (3) single oblique plane osteotomy (SOO, 30° frontal, 15° sagittal, and 30° external). Limb pairs were randomized to a 3D PSG or FH approach. The resultant osteotomies were compared with virtual target osteotomies by surface shape-matching postoperative to the preoperative radii.

RESULTS

The mean ± standard deviation osteotomy angle deviation for all 3D PSG osteotomies (2.8 ± 2.8°, range 0.11-14.1°) was less than for the FH osteotomies (6.4 ± 6.0°, range 0.03-29.7°). No differences were found for osteotomy location in any group. In total, 84% of 3D PSG osteotomies were within 5° deviance from the target compared to 50% of freehand osteotomies.

CONCLUSION

Three-dimensional PSG improved FH accuracy of osteotomy angle in select planes and the most complex osteotomy orientation in a normal ex vivo radial model.

CLINICAL SIGNIFICANCE

Three-dimensional PSGs provided more consistent accuracy, which was most notable in complex radial osteotomies. Future work is needed to investigate guided osteotomies in dogs with antebrachial bone deformities.

Rising role of 3D-printing in delivery of therapeutics for infectious disease

Modern drug delivery to tackle infectious disease has drawn close to personalizing medicine for specific patient populations. Challenges include antibiotic-resistant infections, healthcare associated infections, and customizing treatments for local patient populations. Recently, 3D-printing has become a facilitator for the development of personalized pharmaceutic drug delivery systems. With a variety of manufacturing techniques, 3D-printing offers advantages in drug delivery development for controlled, fine-tuned release and platforms for different routes of administration. This review summarizes 3D-printing techniques in pharmaceutics and drug delivery focusing on treating infectious diseases, and discusses the influence of 3D-printing design considerations on drug delivery platforms targeting these diseases. Additionally, applications of 3D-printing in infectious diseases are summarized, with the goal to provide insight into how future delivery innovations may benefit from 3D-printing to address the global challenges in infectious disease.

Custom three-dimensional printed implants for reconstruction of oncologic pelvic defects

The use of three-dimensional printed implants in the field of orthopedic surgery has become increasingly popular and has potentiated hip reconstruction in the setting of oncologic resections of the pelvis and acetabulum. In this review, we examine and discuss the indications and technical considerations for custom implant reconstruction of pelvic defects.

The Use and Outcomes of 3D Printing in Pediatric Craniofacial Surgery: A Systematic Review

Three-dimensional (3D) printing has demonstrated efficacy in multiple surgical specialties. As accessibility improves, its use in specific fields deserves further attention. We conducted a systematic review of the implementation and outcomes of 3D printing in pediatric craniofacial surgery, as none has been performed. A systematic review was conducted according to Cochrane and PRISMA guidelines. PubMed, Embase, Cochrane library, and Clinicaltrials.gov were queried with combinations of the terms: "3D printing," "craniofacial," "surgery," and "pediatric." Original human studies containing patients <18 years old implementing 3D printing to aid in craniofacial surgery were included. Study selection, grading, and data extraction were performed independently by multiple authors. After screening 120 articles, 7 (3 case series and 4 case reports) were included, published from 2017 to 2022. All studies addressed patients with different disease processes including craniosynostosis, cleft lip/palate, and mandibular hypoplasia. 3D printing was used to create mock surgical models in 2 studies, intraoperative cutting guides/molds (CGs) in 6 studies, and cranioplasty implants in 2 studies. Two case series determined the accuracy of the CGs was acceptable within historical comparison, while 4 articles included subjective statements on improved accuracy. Five studies noted reduced operating time, 2 noted reduced intraoperative blood loss, and 1 felt the use of 3D printed materials was responsible for shorter hospitalization duration. No adverse events were reported. Despite the limitations of the current literature, all studies concluded that the use of 3D printing in pediatric craniofacial surgery was beneficial. Definitive conclusions cannot be made until further controlled research is performed.

Methodology for Preoperative Planning of Bone Deformities Using Three-dimensional Modeling Software

Rapid prototyping technology, known as three-dimensional (3D) printing, and its use in the medical field are advancing. Studies on severe bone deformity treatment with 3D printing showed benefits in postoperative outcomes thanks to this technology. Even so, preoperative planning guidance for surgeons is lacking. This technical note describes a practical step-by-step guide to help surgeons use this technology to optimize the therapeutic plan with free license software and an intuitive interface. This study aims to organize the 3D modeling process using a preoperative computed tomography (CT) scan. This technology allows a deeper understanding of the case and its particularities, such as the direction, planes, and dimensions of the deformity. Planning considering these topics may reduce the surgical time and result in better functional outcomes by understanding the deformity and how to correct it. Associating planning via software with 3D printing can further enhance this therapeutic method.

Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities

3D printing with light is enabled by the photochemistry underpinning it. Without fine control over the ability to photochemically gate covalent bond formation by the light at a certain wavelength and intensity, advanced photoresists with functions spanning from on-demand degradability, adaptability, rapid printing speeds, and tailored functionality are impossible to design. Herein, recent advances in photoresist design for light-driven 3D printing applications are critically assessed, and an outlook of the outstanding challenges and opportunities is provided. This is achieved by classing the discussed photoresists in chemistries that function photoinitiator-free and those that require a photoinitiator to proceed. Such a taxonomy is based on the efficiency with which photons are able to generate covalent bonds, with each concept featuring distinct advantages and drawbacks.

3D printing of biologics-what has been accomplished to date?

Three-dimensional (3D) printing is a promising approach for the stabilization and delivery of non-living biologics. This versatile tool builds complex structures and customized resolutions, and has significant potential in various industries, especially pharmaceutics and biopharmaceutics. Biologics have become increasingly prevalent in the field of medicine due to their diverse applications and benefits. Stability is the main attribute that must be achieved during the development of biologic formulations. 3D printing could help to stabilize biologics by entrapment, support binding, or crosslinking. Furthermore, gene fragments could be transited into cells during co-printing, when the pores on the membrane are enlarged. This review provides: (i) an introduction to 3D printing technologies and biologics, covering genetic elements, therapeutic proteins, antibodies, and bacteriophages; (ii) an overview of the applications of 3D printing of biologics, including regenerative medicine, gene therapy, and personalized treatments; (iii) information on how 3D printing could help to stabilize and deliver biologics; and (iv) discussion on regulations, challenges, and future directions, including microneedle vaccines, novel 3D printing technologies and artificial-intelligence-facilitated research and product development. Overall, the 3D printing of biologics holds great promise for enhancing human health by providing extended longevity and enhanced quality of life, making it an exciting area in the rapidly evolving field of biomedicine.

Shaping the Future of Cardiovascular Disease by 3D Printing Applications in Stent Technology and its Clinical Outcomes

Cardiovascular disease (CVD) is a leading cause of death worldwide. In recent years, 3D printing technology has ushered in a new era of innovation in cardiovascular medicine. 3D printing in CVD management encompasses various aspects, from patient-specific models and preoperative planning to customized medical devices and novel therapeutic approaches. In-stent technology, 3D printing has revolutionized the design and fabrication of intravascular stents, offering tailored solutions for complex anatomies and individualized patient needs. The advantages of 3D-printed stents, such as improved biocompatibility, enhanced mechanical properties, and reduced risk of in-stent restenosis. Moreover, the clinical trials and case studies that shed light on the potential of 3D printing technology to improve patient outcomes and revolutionize the field has been comprehensively discussed. Furthermore, regulatory considerations, and challenges in implementing 3D-printed stents in clinical practice are also addressed, underscoring the need for standardization and quality assurance to ensure patient safety and device reliability. This review highlights a comprehensive resource for clinicians, researchers, and policymakers seeking to harness the full potential of 3D printing technology in the fight against CVD.

Three-Dimensional Printing as a Progressive Innovative Tool for Customized and Precise Drug Delivery

While using three-dimensional printing, materials are deposited layer by layer in accordance with the digital model created by computer-aided design software. Numerous research teams have shown interest in this technology throughout the last few decades to produce various dosage forms in the pharmaceutical industry. The number of publications has increased since the first printed medicine was approved in 2015 by Food and Drug Administration. Considering this, the idea of creating complex, custom-made structures that are loaded with pharmaceuticals for tissue engineering and dose optimization is particularly intriguing. New approaches and techniques for creating unique medication delivery systems are made possible by the development of additive manufacturing keeping in mind the comparative advantages it has over conventional methods of manufacturing medicaments. This review focuses on three-dimensional printed formulations grouped in orally disintegrated tablets, buccal films, implants, suppositories, and microneedles. The various types of techniques that are involved in it are summarized. Additionally, challenges and applications related to three-dimensional printing of pharmaceuticals are also being discussed.

PLA-Based Composite Panels Prepared via Multi-Material Fused Filament Fabrication and Associated Investigation of Process Parameters on Flexural Properties of the Fabricated Composite

This study prepares composite panels with three Polylactic acid (PLA)-based materials via the multi-material fused filament fabrication method. The influences of four processing parameters on the mechanical properties of 3D-printed samples are investigated employing the Taguchi method. These parameters include the relative volume ratio, material printing order, filling pattern, and filling density. A "larger is better" signal-to-noise analysis is performed to identify the optimal combination of printing parameters that yield maximum bending strength and bending modulus of elasticity. The results reveal that the optimal combination of printing parameters that maximizes the bending strength involves a volume ratio of 1:1:2, a material sequence of PLA/foam-agent-modified eco-friendly PLA (ePLA-LW)/glass fiber-reinforced eco-friendly PLA (ePLA-GF), a Gyroid filling pattern, and a filling density of 80%, and the optimal combination of printing parameters for maximum bending modulus involves a volume ratio of 1:2:1 with a material sequence of PLA/ePLA-LW/ePLA-GF, a Grid filling pattern, and 80% filling density. The Taguchi prediction method is utilized to determine an optimal combination of processing parameters for achieving optimal flexural performances, and predicted outcomes are validated through related experiments. The experimental values of strength and modulus are 43.91 MPa and 1.23 GPa, respectively, both very close to the predicted values of 46.87 MPa and 1.2 GPa for strength and modulus. The Taguchi experiments indicate that the material sequence is the most crucial factor influencing the flexural strength of the composite panels. The experiment result demonstrates that the flexural strength and modulus of the first material sequence are 67.72 MPa and 1.53 GPa, while the flexural strength and modulus of the third material sequence are reduced to 27.09 MPa and 0.72 GPa, respectively, only 42% and 47% of the first material sequence. The above findings provide an important reference for improving the performance of multi-material 3D-printed products.

Fabricating Patient-Specific 3D Printed Drill Guides to Treat Femoral Head Avascular Necrosis

Background

Femoral head avascular necrosis (AVN), or death of femoral head tissue due to a lack of blood supply, is a leading cause of total hip replacement for non-geriatric patients. Core decompression (CD) is an effective treatment to re-establish blood flow for patients with AVN. Techniques aimed at improving its efficacy are an area of active research. We propose the use of 3D printed drill guides to accurately guide therapeutic devices for CD.

Methods

Using femur sawbones, image processing software, and 3D modeling software, we created a custom-built device with pre-determined drill trajectories and tested the feasibility of the 3D printed drill guides for CD. A fellowship trained orthopedic surgeon used the drill guide to position an 8 ga, 230 mm long decompression device in the three synthetic femurs. CT scans were taken of the sawbones with the drill guide and decompression device. CT scans were processed in the 3D modeling software. Descriptive statistics measuring the angular and needle-tip deviation were compared to the original virtually planned model.

Results

Compared to the original 3D model, the trials had a mean displacement of 1.440±1.03 mm and a mean angle deviation of 1.093±0.749°.

Conclusions

The drill guides were demonstrated to accurately guide the decompression device along its predetermined drill trajectory. Accuracy was assessed by comparing values to literature-reported values and considered AVN lesion size. This study demonstrates the potential use of 3D printing technology to improve the efficacy of CD techniques.

Additive manufacturing and three-dimensional printing in obstetrics and gynecology: a comprehensive review

Three-dimensional (3D) printing, also known as additive manufacturing, is a technology used to create complex 3D structures out of a digital model that can be almost any shape. Additive manufacturing allows the creation of customized, finely detailed constructs. Improvements in 3D printing, increased 3D printer availability, decreasing costs, development of biomaterials, and improved cell culture techniques have enabled complex, novel, and customized medical applications to develop. There have been rapid development and utilization of 3D printing technologies in orthopedics, dentistry, urology, reconstructive surgery, and other health care areas. Obstetrics and Gynecology (OBGYN) is an emerging application field for 3D printing. This technology can be utilized in OBGYN for preventive medicine, early diagnosis, and timely treatment of women-and-fetus-specific health issues. Moreover, 3D printed simulations of surgical procedures enable the training of physicians according to the needs of any given procedure. Herein, we summarize the technology and materials behind additive manufacturing and review the most recent advancements in the application of 3D printing in OBGYN studies, such as diagnosis, surgical planning, training, simulation, and customized prosthesis. Furthermore, we aim to give a future perspective on the integration of 3D printing and OBGYN applications and to provide insight into the potential applications.

Clinical Effectiveness of Arthroscopy-Assisted Fixation in the Treatment of Avulsed Posterior Cruciate Ligament Injuries

Avulsed posterior cruciate ligament (PCL) injuries are complex orthopedic challenges that require careful consideration and optimal management. Arthroscopy offers advantages, including smaller incisions, reduced soft tissue disruption, reduced postoperative pain, and improved visualization of intraarticular anatomy. Arthroscopy-assisted fixation results in superior clinical outcomes. Patient-specific factors, graft choice, and timing of surgery significantly impact outcomes. Rehabilitation is vital and requires a tailored approach to restore knee function. Biomechanically, arthroscopy-assisted fixation enhances joint stability and range of motion, reducing the risk of secondary injuries. Advancements in technology and surgical techniques further improve outcomes. Concomitant injuries and incorporation are essential considerations. Arthroscopy-assisted fixation is a recommended approach, but personalized care is crucial for successful recovery. Its precision in reattaching the PCL enhances joint stability and clinical results, aligning with outcomes seen in conventional procedures. Using biocompatible materials in fixation devices has significantly reduced the risk of allergic reactions or complications. This has allowed a faster and smoother recovery process for patients undergoing arthroscopy-assisted fixation. The incorporation of physical therapy and rehabilitation programs after surgery plays a vital role in restoring joint function and preventing muscle atrophy. The combination of advanced technology, surgical techniques, and personalized care has greatly improved the success rate of arthroscopy-assisted fixation procedures. Advancements in technology further improve patient outcomes, but each case should be individually assessed to determine the most appropriate treatment approach.

Understanding the Complexities of Cast Post Retention: A Comprehensive Review of Influential Factors

This comprehensive review delves into the intricate landscape of cast post retention in restorative dentistry, encompassing historical perspectives, contemporary techniques, and future directions. Examining factors ranging from tooth-related considerations to prosthesis-related dynamics, the review provides a detailed analysis of clinical techniques, including step-by-step procedures, common challenges, and innovative advancements. Technological breakthroughs, such as digital impressions, computer-aided design and computer-aided manufacturing (CAD/CAM) technology, three-dimensional (3D) printing, and finite element analysis, are explored for their transformative impact on precision and customization. The discussion extends to the promising future of cast post retention, emphasising emerging materials, the integration of artificial intelligence in treatment planning, and patient-specific approaches. Implications for clinical practice underscore the importance of individualised treatment planning and the adoption of advanced technologies. Recommendations for future research advocate for comprehensive long-term clinical studies, investigations into AI-driven treatment planning, and a focus on patient outcomes and satisfaction. This review consolidates existing knowledge and anticipates a future marked by enhanced precision, individualised care, and improved long-term success in cast post-retained restorations.

Advancements in Robotic Surgery: A Comprehensive Overview of Current Utilizations and Upcoming Frontiers

Robotic surgery, a groundbreaking advancement in medical technology, has redefined the landscape of surgical procedures. This comprehensive overview explores the multifaceted world of robotic surgery, encompassing its definition, historical development, current applications, clinical outcomes, benefits, emerging frontiers, challenges, and future implications. We delve into the fundamentals of robotic surgical systems, examining their components and advantages. From general and gynecological surgery to urology, cardiac surgery, orthopedics, and beyond, we highlight the diverse specialties where robotic surgery is making a significant impact. The many benefits discussed include improved patient outcomes, reduced complications, faster recovery times, cost-effectiveness, and enhanced surgeon experiences. The outlook reveals a healthcare landscape where robotic surgery is increasingly vital, enabling personalized medicine, bridging healthcare disparities, and advancing surgical precision. However, challenges such as cost, surgeon training, technical issues, ethical considerations, and patient acceptance remain relevant. In conclusion, robotic surgery is poised to continue shaping the future of health care, offering transformative possibilities while emphasizing the importance of collaboration, innovation, and ethical governance.

Stimuli-Responsive Hydrogels: The Dynamic Smart Biomaterials of Tomorrow

In the past decade, stimuli-responsive hydrogels are increasingly studied as biomaterials for tissue engineering and regenerative medicine purposes. Smart hydrogels can not only replicate the physicochemical properties of the extracellular matrix but also mimic dynamic processes that are crucial for the regulation of cell behavior. Dynamic changes can be influenced by the hydrogel itself (isotropic vs anisotropic) or guided by applying localized triggers. The resulting swelling-shrinking, shape-morphing, as well as patterns have been shown to influence cell function in a spatiotemporally controlled manner. Furthermore, the use of stimuli-responsive hydrogels as bioinks in 4D bioprinting is very promising as they allow the biofabrication of complex microstructures. This perspective discusses recent cutting-edge advances as well as current challenges in the field of smart biomaterials for tissue engineering. Additionally, emerging trends and potential future directions are addressed.

Empowering Precision Medicine: The Impact of 3D Printing on Personalized Therapeutic

This review explores recent advancements and applications of 3D printing in healthcare, with a focus on personalized medicine, tissue engineering, and medical device production. It also assesses economic, environmental, and ethical considerations. In our review of the literature, we employed a comprehensive search strategy, utilizing well-known databases like PubMed and Google Scholar. Our chosen keywords encompassed essential topics, including 3D printing, personalized medicine, nanotechnology, and related areas. We first screened article titles and abstracts and then conducted a detailed examination of selected articles without imposing any date limitations. The articles selected for inclusion, comprising research studies, clinical investigations, and expert opinions, underwent a meticulous quality assessment. This methodology ensured the incorporation of high-quality sources, contributing to a robust exploration of the role of 3D printing in the realm of healthcare. The review highlights 3D printing's potential in healthcare, including customized drug delivery systems, patient-specific implants, prosthetics, and biofabrication of organs. These innovations have significantly improved patient outcomes. Integration of nanotechnology has enhanced drug delivery precision and biocompatibility. 3D printing also demonstrates cost-effectiveness and sustainability through optimized material usage and recycling. The healthcare sector has witnessed remarkable progress through 3D printing, promoting a patient-centric approach. From personalized implants to radiation shielding and drug delivery systems, 3D printing offers tailored solutions. Its transformative applications, coupled with economic viability and sustainability, have the potential to revolutionize healthcare. Addressing material biocompatibility, standardization, and ethical concerns is essential for responsible adoption.

Development of reduced volume endosseous cuspid tooth implant using topology optimization by SIMP technique for improved osseointegration

The article aims to design and develop a topology-optimized endosseous cuspid tooth implant of the maxilla region. The manuscript presents a numerical analysis of the resulting von Mises stresses and effective strain resulting in the topology-optimized implant with occlusal loading of 110 N. Solid Isotropic Material with Penalization (SIMP) method is employed for topology optimization and four different models, namely model-1, model-2, model-3, and model-4, are developed based on volume reduction rates of 8%, 16%, 24%, and 32%, respectively. FEA results highlight that the maximum stress and strain in the screw increases with volume reduction rates. The comparative analyses of the resulting stresses in the compact and cancellous bone along with the strain in the screw led to the conclusion that model-1, model-2, and model-3 resulted in moderate stresses on compact and cancellous bone compared to the original model of the implant. However, the screw and bones are subjected to maximum stress and strain in the model-4. The study concludes that model-2, with 16% reduced volume and 14.2% reduced mass as compared to the original implant, may be considered as the optimized design of the model. The resulting model offers a significant reduction in the weight and volume with a minor increase in effective stress and strain without negatively impacting the functionality and bio-mechanical performance of the implant. The optimized dental implant prototype is also fabricated as a proof of concept by the Fused Deposition Modelling process.

Dosimetric parameters and safety analysis of 3D-printing non-coplanar template-assisted interstitial brachytherapy for non-centrally recurrent cervical cancer

Introduction

The prognosis of patients with non-central recurrent cervical cancer (NRCC) remains poor, and treatment options are limited. We aimed to explore the accuracy and safety of the 3D-printed non-coplanar template (3D-PNCT)-assisted 192Ir interstitial brachytherapy (ISBT) in the treatment of NRCC.

Material and methods

A total of 36 patients with NRCC who received 3D-PNCT-guided 192Ir ISBT in the First Affiliated Hospital of Zhengzhou University from January 2021 to July 2022 were included in this study. There were 36 3D-PNCTs that were designed and printed. The prescribed dose was 30-36 Gy, divided into five to six times, once a week. To evaluate whether the actual parameters were consistent with the preoperative design, the dosimetric parameters of pre- and postoperative treatment plans were compared, including dose of 90% high-risk clinical target volume (HR-CTV D90), volume percentage of 100% and 150% prescribed dose V100% and V150%, homogeneity index (HI), conformal index (CI), external index (EI), and dose received by 2 cm3 (D2cm3) of the rectum, colon, bladder, and ileum. The safety parameters including occurrence of bleeding, infection, pain, radiation enteritis, and radiation cystitis within 3 months after operation were recorded.

Results

All patients successfully completed the treatment and achieved the goals of the preoperative plan. There was no significant difference in the accuracy (HRCTVD90, V100%, EI, CI, and HI) and safety (D2cm3 of rectum, colon, bladder, and ileum) parameters of the postoperative plan compared with the preoperative plan (all p>0.05). Major side effects included bleeding at the puncture site (13.9%), postoperative pain (8.3%), acute radiation cystitis (13.9%), and radiation enteritis (19.4%). There were no serious perioperative complications and no grade 3-4 acute radiotherapy side effects.

Conclusion

3D-PNCT-assisted 192Ir ISBT can be accurately and safely applied in the treatment of patients with NRCC.

Development of Biocompatible 3D-Printed Artificial Blood Vessels through Multidimensional Approaches

Within the human body, the intricate network of blood vessels plays a pivotal role in transporting nutrients and oxygen and maintaining homeostasis. Bioprinting is an innovative technology with the potential to revolutionize this field by constructing complex multicellular structures. This technique offers the advantage of depositing individual cells, growth factors, and biochemical signals, thereby facilitating the growth of functional blood vessels. Despite the challenges in fabricating vascularized constructs, bioprinting has emerged as an advance in organ engineering. The continuous evolution of bioprinting technology and biomaterial knowledge provides an avenue to overcome the hurdles associated with vascularized tissue fabrication. This article provides an overview of the biofabrication process used to create vascular and vascularized constructs. It delves into the various techniques used in vascular engineering, including extrusion-, droplet-, and laser-based bioprinting methods. Integrating these techniques offers the prospect of crafting artificial blood vessels with remarkable precision and functionality. Therefore, the potential impact of bioprinting in vascular engineering is significant. With technological advances, it holds promise in revolutionizing organ transplantation, tissue engineering, and regenerative medicine. By mimicking the natural complexity of blood vessels, bioprinting brings us one step closer to engineering organs with functional vasculature, ushering in a new era of medical advancement.

Readiness for Change in the Implementation of a 3D Printing Initiative in a Catalan Tertiary Hospital Using the Normalization Process Theory: Survey Study

BACKGROUND

The high failure rate of innovation projects motivates us to understand the perceptions about resistances and barriers of the main stakeholders to improving success rates.

OBJECTIVE

This study aims to analyze the readiness for change in the implementation of a 3D printing project in a Catalan tertiary hospital prior to its implementation.

METHODS

We used a web-based, voluntary, and anonymous survey using the Normalization Measurement Development questionnaire (NoMAD) to gather views and perceptions from a selected group of health care professionals at Germans Trias i Pujol University Hospital.

RESULTS

In this study, 58 professionals, including heads of service (n=30, 51%), doctors (n=18, 31%), nurses (n=7, 12%), and support staff (n=3, 5%), responded to the questionnaire. All groups saw the value of the project and were willing to enroll and support it. Respondents reported the highest scores (out of 5) in cognitive participation (mean 4.45, SD 0.04), coherence (mean 3.72, SD 0.13), and reflective monitoring (mean 3.80, SD 0.25). The weakest score was in collective action (mean 3.52, SD 0.12). There were no statistically significant differences in scores among professions in the survey.

CONCLUSIONS

The 3D printing project implementation should pay attention to preparing, defining, sharing, and supporting the operational work involved in its use and implementation. It should also understand, assess, and communicate the ways in which the new set of practices can affect the users and others around them. We suggest that health officers and politicians consider this experience as a solid ground toward the development of a more efficient health innovation system and as a catalyst for transformation.

Patient-specific plates for facial fracture surgery: A retrospective case series

OBJECTIVES

Surgeons often encounter challenges when treating maxillofacial fractures using conventional methods that involve trimming or bending ready-made titanium plates for open reduction and internal fixation (ORIF) since it can be time-consuming, imprecise, and inconvenient. This retrospective case series aimed to introduce a novel bone reduction method that utilizes virtual planning, patient-specific surgical guides, and titanium plates.

METHODS

Seven patients with mandibular symphysis or subcondylar fractures resulting from facial trauma underwent cone-beam computed tomography (CBCT) or facial CT scans, and their medical histories were documented. Virtual surgery was conducted based on three-dimensional (3D) stereolithography images derived from CT scans using the FaceGide software (MegaGen, Daegu, Korea). ORIF was performed using patient-specific surgical guides and plates that were designed, printed, and milled. Radiographic, clinical, and occlusal evaluations were conducted at two weeks and six weeks postoperatively. Subsequently, 3D images from virtual surgery and postoperative CT scans were compared.

RESULTS

The comparison of 3D virtual surgery and postoperative images revealed minimal surface differences of less than 1 mm. T-scan evaluations indicated that there were no statistically significant differences between the two- and six-week postoperative assessments. Favorable clinical outcomes were observed.

CONCLUSION

This novel method demonstrated stable outcomes in terms of occlusion and healing, with no notable complications. Consequently, this approach may serve as a viable alternative to conventional methods.

CLINICAL SIGNIFICANCE

Facial fracture surgery that utilizes patient-specific surgical guides and plates within a digital workflow can facilitate meticulous surgical planning, reducing the risk of complications and minimizing operation time.

Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)-A Literature Review

In recent years, plastics recycling has become one of the leading environmental and waste management issues. Along with the main advantage of plastics, which is undoubtedly their long life, the problem of managing their waste has arisen. Recycling is recognised as the preferred option for waste management, with the aim of reusing them to create new products using 3D printing. Additive manufacturing (AM) is an emerging and evolving rapid tooling technology. With 3D printing, it is possible to achieve lightweight structures with high dimensional accuracy and reduce manufacturing costs for non-standard geometries. Currently, 3D printing research is moving towards the production of materials not only of pure polymers but also their composites. Bioplastics, especially those that are biodegradable and compostable, have emerged as an alternative for human development. This article provides a brief overview of the possibilities of using thermoplastic waste materials through the application of 3D printing, creating innovative materials from recycled and naturally derived materials, i.e., biomass (natural reinforcing fibres) in 3D printing. The materials produced from them are ecological, widely available and cost-effective. Research activities related to the production of bio-based materials have gradually increased over the last two decades, with the aim of reducing environmental problems. This article summarises the efforts made by researchers to discover new innovative materials for 3D printing.

Advances in the Study of Bionic Mineralized Collagen, PLGA, Magnesium Ionomer Materials, and Their Composite Scaffolds for Bone Defect Treatment

The healing of bone defects after a fracture remains a key issue to be addressed. Globally, more than 20 million patients experience bone defects annually. Among all artificial bone repair materials that can aid healing, implantable scaffolds made from a mineralized collagen (MC) base have the strongest bionic properties. The MC/PLGA scaffold, created by adding Poly (lactic-co-glycolic acid) copolymer (PLGA) and magnesium metal to the MC substrate, plays a powerful role in promoting fracture healing because, on the one hand, it has good biocompatibility similar to that of MC; on the other hand, the addition of PLGA provides the scaffold with an interconnected porous structure, and the addition of magnesium allows the scaffold to perform anti-inflammatory, osteogenic, and angiogenic activities. Using the latest 3D printing technology for scaffold fabrication, it is possible to model the scaffold in advance according to the requirement and produce a therapeutic scaffold suitable for various bone-defect shapes with less time and effort, which can promote bone tissue healing and regeneration to the maximum extent. This study reviews the material selection and technical preparation of MC/PLGA scaffolds, and the progress of their research on bone defect treatment.

The Progress in Bioprinting and Its Potential Impact on Health-Related Quality of Life

The intensive development of technologies related to human health in recent years has caused a real revolution. The transition from conventional medicine to personalized medicine, largely driven by bioprinting, is expected to have a significant positive impact on a patient's quality of life. This article aims to conduct a systematic review of bioprinting's potential impact on health-related quality of life. A literature search was conducted in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive literature search was undertaken using the PubMed, Scopus, Google Scholar, and ScienceDirect databases between 2019 and 2023. We have identified some of the most significant potential benefits of bioprinting to improve the patient's quality of life: personalized part production; saving millions of lives; reducing rejection risks after transplantation; accelerating the process of skin tissue regeneration; homocellular tissue model generation; precise fabrication process with accurate specifications; and eliminating the need for organs donor, and thus reducing patient waiting time. In addition, these advances in bioprinting have the potential to greatly benefit cancer treatment and other research, offering medical solutions tailored to each individual patient that could increase the patient's chance of survival and significantly improve their overall well-being. Although some of these advancements are still in the research stage, the encouraging results from scientific studies suggest that they are on the verge of being integrated into personalized patient treatment. The progress in bioprinting has the power to revolutionize medicine and healthcare, promising to have a profound impact on improving the quality of life and potentially transforming the field of medicine and healthcare.

Effect of Sterilization on Bone Implants Based on Biodegradable Polylactide and Hydroxyapatite

Medical devices intended for implantation must be, in accordance with the legal provisions in force in the European Union, sterile. The effect of sterilization on the structural and thermal properties of implants, made by 3D printing from biodegradable polylactide and hydroxyapatite in a proportion of 9/1 by weight, was evaluated. The implants were sterilized using three different methods, i.e., steam sterilization, ethylene oxide sterilization, and electron beam radiation sterilization. As a result of the assessment of the structural properties of the implants after sterilization, a change in the molecular weight of the raw material of the designed implants was found after each of the performed sterilization methods, while maintaining similar characteristics of the thermal properties and functional groups present.

CBCT-Based Design of Patient-Specific 3D Bone Grafts for Periodontal Regeneration

The purpose of this article is to define and implement a methodology for the 3D design of customized patient-specific scaffolds (bone grafts) for the regeneration of periodontal tissues. The prerequisite of the proposed workflow is the three-dimensional (3D) structure of the periodontal defect, i.e., the 3D model of the hard tissues (alveolar bone and teeth) around the periodontal damage, which is proposed to be generated via a segmentation and 3D editing methodology using cone beam computed tomography (CBCT) data. Two types of methodologies for 3D periodontal scaffold (graft) design are described: (i) The methodology of designing periodontal defect customized block grafts and (ii) the methodology of designing extraction socket preservation customized grafts. The application of the proposed methodology for the generation of a 3D model of the hard tissues around periodontal defects of a patient using a CBCT scan and the 3D design of the two aforementioned types of scaffolds for personalized periodontal regenerative treatment shows promising results. The outputs of this work will be used as the basis for the 3D printing of bioabsorbable scaffolds of personalized treatment against periodontitis, which will simultaneously be used as sustained-release drug carriers.

Engineering 3D-Printed Advanced Healthcare Materials for Periprosthetic Joint Infections

The use of additive manufacturing or 3D printing in biomedicine has experienced fast growth in the last few years, becoming a promising tool in pharmaceutical development and manufacturing, especially in parenteral formulations and implantable drug delivery systems (IDDSs). Periprosthetic joint infections (PJIs) are a common complication in arthroplasties, with a prevalence of over 4%. There is still no treatment that fully covers the need for preventing and treating biofilm formation. However, 3D printing plays a major role in the development of novel therapies for PJIs. This review will provide a deep understanding of the different approaches based on 3D-printing techniques for the current management and prophylaxis of PJIs. The two main strategies are focused on IDDSs that are loaded or coated with antimicrobials, commonly in combination with bone regeneration agents and 3D-printed orthopedic implants with modified surfaces and antimicrobial properties. The wide variety of printing methods and materials have allowed for the manufacture of IDDSs that are perfectly adjusted to patients' physiognomy, with different drug release profiles, geometries, and inner and outer architectures, and are fully individualized, targeting specific pathogens. Although these novel treatments are demonstrating promising results, in vivo studies and clinical trials are required for their translation from the bench to the market.