Study of Surface Structure Changes for Selected Ceramics Used in the CAD/CAM System on the Degree of Microbial Colonization, In Vitro Tests

Determination of streptococcus mutans retention in acidic and neutral pH artificial saliva environment of all-ceramic materials with different surface treatment

BACKGROUND

Although surface finishing processes are effective against Streptococcus mutans biofilm, the mechanism of action of saliva with different acidity values ​​has not been studied in detail. This study aims to produce four different all-ceramic materials in a single session with CAD/CAM devices and apply two different surface finishing processes, glazing and polishing, and then determine the retention of Streptococcus mutants on the surfaces of the materials in saliva with varying levels of acidity.

METHODS

Zirconia-reinforced lithium silicate (Vita Suprinity, Vita Zahnfabrik, Bad Saöckingen, Germany), monochromatic feldspar (Vitablocs Mark 2, Vita Zahnfabrik, Bad Saöckingen, Germany), leucite glass ceramic (IPS Empress CAD, Ivoclar Vivadent, Liechtenstein), and monolithic zirconia (Incoris TZI (Cerec) Sirona, Germany) were used in the study. The surface roughness values ​​of all samples were measured with a profilometer before the application of S. mutans biofilm. A modified Fusayama artificial saliva model was prepared to reflect the oral environment. S. mutans bacterial biofilm growth rate was determined for each group with tetrazolium dye (MTT) assay and the colony-forming unit (CFU/mL). Scanning electron microscopy was used to compare the efficacy of all-ceramic materials against bacterial biofilm.

RESULTS

The surface treatment applied with polishing rubber (Ra 0.18-0.33) resulted in a slightly less rough surface than the glaze (Ra 0.32-0.35) treatment. S. mutans showed less retention in ceramic samples treated with the pH 5 saliva compared to the pH 7 ones. When this group's percentage growth rates, colony-forming units, and scanning electron microscopy images colored with ImageJ were examined, the Glaze application reduced growth (65.02 - 91.38%) and colony formation (6.1 × 1010 - 7.8 × 1010) in all samples except for Vita Suprinity compared to the Polishing Rubber application (p < 0.05).

CONCLUSION

The pH of the salivary, the surface roughness, and the chemical content of the ceramic samples may directly affect the S. mutans biofilm formations. The Polishing Rubber of the surface treatment type should only be suggested for Vita Suprinity, whereas the Glaze of the surface treatment type should be proposed for Vita Block Mark II and InCoris TZI in an acidic salivary environment. A surface treatment method other than Glaze and Polishing Rubber should be preferred for IPS Empress CAD.

Bacterial adhesion to composite resins produced by additive and subtractive manufacturing

The aim of this study was to evaluate the surface roughness and contact angle of composite resins produced by CAD/CAM milling and three-dimensional (3D) printing for permanent restorations as well as the adhesion of S. mutans and S. sanguinis bacteria to these composites. Three CAD/CAM milling composite resins (Vita Enamic-VE, Cerasmart-CE, Lava Ultimate-LU) and three 3D printing resins (Varseo Smile Crown plus-VSC, Saremco print Crowntech-SPC, Formlabs 3B Permanent crown-FLP) were selected. Twenty samples were prepared for each group. Using a contact profilometer, the surface roughness was determined, and an optical goniometer was used to quantify the contact angle. To evaluate the bacterial adhesion, composite specimens were immersed in mucin containing artificial saliva. All samples were incubated for 24 h at 37°C in 5% CO2. CFUs were determined by counting colonies after the incubation period. Surface roughness values of test samples were the highest in the Group VSC [0.46 (0.14) µm], whereas the lowest values were found in the Group LU [0.23 (0.05) µm]. There was no statistically significant difference between the groups in contact angle values (p > 0.05). The S. mutans adhesion extent on the Group SPC was statistically higher compared to all other materials with p < 0.05. For S. sanguinis, the lowest bacterial adhesion value was recorded in Group CE (3.00 × 104 CFU/ml) and statistically significant differences were found with Group VE and VSC (p < 0.05). Different digital manufacturing techniques and material compositions can affect the surface roughnesses of composite resins. All composite resin samples have hydrophobic characteristics. Microbial adhesion of the tested composite resins may be varied depending on the bacterial species. S. mutans showed much more adhesion to these materials than S. sanguinis.

Biofilm Formation on Hybrid, Resin-Based CAD/CAM Materials for Indirect Restorations: A Comprehensive Review

Hybrid materials are a recent addition in the field of restorative dentistry for computer-aided design/computer-aided manufacturing (CAD/CAM) indirect restorations. The long-term clinical success of modern dental restorative materials is influenced by multiple factors. Among the characteristics affecting the longevity of a restoration, the mechanical properties and physicοchemical interactions are of utmost importance. While numerous researchers constantly evaluate mechanical properties, the biological background of resin-based CAD/CAM biomaterials is scarcely investigated and, therefore, less described in the literature. This review aims to analyze biofilm formation on the surfaces of novel, hybrid, resin-based CAD/CAM materials and evaluate the methodological protocols followed to assess microbial growth. It is demonstrated that the surface structure, the composition and the finishing and polishing procedures on the surface of a dental restorative material influence initial bacterial adhesion; however, most studies focus on in vitro protocols, and in vivo and/or in situ research of microbiomics in CAD/CAM restorative materials is lacking, obstructing an accurate understanding of the bioadhesion phenomenon in the oral cavity.

In Vitro Evaluation of the Shading Effect of Various Zirconia Surface Stains on Porcelain Crowns

Human teeth display various colors under natural light. Dental restorations, such as zirconia crowns, are generally used to rehabilitate the oral function of patients with tooth loss due to trauma or natural tooth falls. However, significant improvements in the color and translucency of zirconia are required to meet the clinical needs for dental restoration. In the past, a large amount of ceramic powder has been used to improve the appearance of zirconia. However, the interface between the ceramic powder and zirconia makes them prone to falling off. Therefore, the aesthetics of zirconia crowns remains a major challenge. Recently, substantial advances have been made in the field of dental materials, as special staining agents for zirconia have been introduced as alternatives to ceramic powders. Therefore, this study tested zirconia-specific staining agents that were used to produce zirconia samples with A1 and A3 colors. A dental colorimetric plate was used as the control group to assess the staining effects of the different brands of staining agents. Meanwhile, two hypotheses were proposed: that the staining effects of these special staining agents for zirconia met the criteria for clinical application and that there was no significant difference between the different staining agents for zirconia. The results showed that the coatings of different brands of staining agents were ultrathin, with a thickness of approximately 27–78 µm. In addition, the coloring effects of the zirconia staining agents were not significantly different from those of the colorimetric plates. After staining, the zirconia samples had decreased surface roughness and contact angle values, which improved surface smoothness and cleanliness. In summary, the results support the hypothesis of this study that zirconia stains can be used as an alternative to the current fabrication methods for clinical dental restorations. We sought to identify the clinical techniques that are easier to perform and to overcome the current problem of dental technicians requiring considerable dentin space for staining. It is expected that the results of this study will be useful in clinical dental restorations.

Effect of surface properties of ceramic materials on bacterial adhesion: A systematic review

PURPOSE

The objective of this systematic review was to describe studies that report on whether surface characteristics such as electrostatic charge, surface free energy, and surface topography promote influence on bacterial adhesion on ceramic surfaces.

MATERIAL AND METHOD

Searches in the SCOPUS, PubMed/Medline, Web of Science, EMBASE, and Google Scholar databases were performed between December 2020 and January 2021 and updated in March 2021. In addition, a manual search of reference lists from relevant retrieved articles was performed. The criteria included: studies that evaluated ceramic surfaces, which described factors such as surface free energy, electrostatic charges, roughness, zeta potential, and their relationship with bacteria.

RESULTS

Database search resulted in 348 papers. Of the 24 studies selected for full reading, 17 articles remained in this systematic review. Another five studies were found in references of articles included, totaling 22 studies. These had a high heterogeneity making it difficult to perform statistical analysis, so a descriptive analysis was performed.

CONCLUSIONS

For dental ceramics, not enough results were found to demonstrate the influence of the electrostatic condition, and its relationship with bacterial adhesion. However, studies of this review show that there is a correlation between bacterial adhesion, surface free energy, and topography.

CLINICAL SIGNIFICANCE

The knowledge of ceramics with repulsive physical-chemical interactions would allow an environment suggestive of non-adhesion of pathogenic biofilm.

Bacteriological Evaluation of Gingival Crevicular Fluid in Teeth Restored Using Fixed Dental Prostheses: An In Vivo Study

The present in vivo study determined the microbiological counts of the gingival crevicular fluid (GCF) among patients with fixed dental prostheses fabricated using three different techniques. A total of 129 subjects were divided into three study groups: first, cobalt-chrome-based, metal-ceramic prostheses fabricated by the conventional method (MC, n = 35); the second group consisted of cobalt-chrome-based, metal-ceramic prostheses fabricated by the computer-aided design and computer-aided manufacturing (CAD/CAM) technique (CC-MC, n = 35); the third group comprised zirconia-based ceramic prostheses fabricated using the CAD/CAM technique (CC-Zr, n = 35). The control consisted of 24 patients using prostheses fabricated with either MC, CC-MC, or CC-Zr. The GCF was obtained from the subjects before treatment, and 6 and 12 months after the prosthetic treatment. Bacteriological and bacterioscopic analysis of the GCF was performed to analyze the patients’ GCF. The data were analyzed using SPSS V20 (IBM Company, Chicago, IL, USA). The number of microorganisms of the gingival crevicular fluid in all groups at 12 months of prosthetic treatment reduced dramatically compared with the data obtained before prosthetic treatment. Inflammatory processes in the periodontium occurred slowly in the case of zirconium oxide-based ceramic constructions due to their biocompatibility with the mucous membranes and tissues of the oral cavity as well as a reduced risk of dental biofilm formation. This should be considered by dentists and prosthodontists when choosing restoration materials for subjects with periodontal pathology.

Review on Polymer, Ceramic and Composite Materials for CAD/CAM Indirect Restorations in Dentistry-Application, Mechanical Characteristics and Comparison

The aim of this review article is to present various material groups, including ceramics, composites and hybrid materials, currently utilized in the field of CAD/CAM. The described technology is amongst the most important in modern prosthetics. Materials that are applicable in this technique are constantly tested, evaluated and improved. Nowadays, research on dental materials is carried out in order to meet the increasing demand on highly aesthetic and functional indirect restorations. Recent studies present the long-term clinical success of restorations made with the help of both ceramic and composite materials in the CAD/CAM method. However, new materials are developed and introduced that do not have long-term in vivo observations. We can outline a monolithic polymer-infiltrated ceramic network and zirconia teeth support that show promising results to date but require further assessment. The materials will be compared with regard to their mechanical and clinical properties, purpose, advantages and limitations.

Key Properties of a Bioactive Ag-SiO2/TiO2 Coating on NiTi Shape Memory Alloy as Necessary at the Development of a New Class of Biomedical Materials

Recent years have seen the dynamic development of methods for functionalizing the surface of implants using biomaterials that can mimic the physical and mechanical nature of native tissue, prevent the formation of bacterial biofilm, promote osteoconduction, and have the ability to sustain cell proliferation. One of the concepts for achieving this goal, which is presented in this work, is to functionalize the surface of NiTi shape memory alloy by an atypical glass-like nanocomposite that consists of SiO2-TiO2 with silver nanoparticles. However, determining the potential medical uses of bio(nano)coating prepared in this way requires an analysis of its surface roughness, tribology, or wettability, especially in the context of the commonly used reference coat-forming hydroxyapatite (HAp). According to our results, the surface roughness ranged between (112 ± 3) nm (Ag-SiO2)-(141 ± 5) nm (HAp), the water contact angle was in the range (74.8 ± 1.6)° (Ag-SiO2)-(70.6 ± 1.2)° (HAp), while the surface free energy was in the range of 45.4 mJ/m2 (Ag-SiO2)-46.8 mJ/m2 (HAp). The adhesive force and friction coefficient were determined to be 1.04 (Ag-SiO2)-1.14 (HAp) and 0.247 ± 0.012 (Ag-SiO2) and 0.397 ± 0.034 (HAp), respectively. The chemical data showed that the release of the metal, mainly Ni from the covered NiTi substrate or Ag from Ag-SiO2 coating had a negligible effect. It was revealed that the NiTi alloy that was coated with Ag-SiO2 did not favor the formation of E. coli or S. aureus biofilm compared to the HAp-coated alloy. Moreover, both approaches to surface functionalization indicated good viability of the normal human dermal fibroblast and osteoblast cells and confirmed the high osteoconductive features of the biomaterial. The similarities of both types of coat-forming materials indicate an excellent potential of the silver-silica composite as a new material for the functionalization of the surface of a biomaterial and the development of a new type of functionalized implants.

The Influence of Ozonated Olive Oil-Loaded and Copper-Doped Nanohydroxyapatites on Planktonic Forms of Microorganisms

The research has been carried out with a focus on the assessment of the antimicrobial efficacy of pure nanohydroxyapatite, Cu²⁺-doped nanohydroxyapatite, ozonated olive oil-loaded nanohydroxyapatite, and Cu²⁺-doped nanohydroxyapatite, respectively. Their potential antimicrobial activity was investigated against Streptococcus mutans, Lactobacillus rhamnosus, and Candida albicans. Among all tested materials, the highest efficacy was observed in terms of ozonated olive oil. The studies were performed using an Ultraviolet–Visible spectrophotometry (UV-Vis), electron microscopy, and statistical methods, by determining the value of Colony-Forming Units (CFU/mL) and Minimal Inhibitory Concentration (MIC).