Bispecific Antibodies: Molecules That Enable Novel Therapeutic Strategies

Suppression of MUC1-Overexpressing Tumors by a Novel MUC1/CD3 Bispecific Antibody

Mucin1 (MUC1) is abnormally glycosylated and overexpressed in a variety of epithelial cancers and plays a critical role in tumor progression. MUC1 has received remark attention as an oncogenic molecule and is considered a valuable tumor target for immunotherapy, while many monoclonal antibodies (mAbs) targeting MUC1-positive cancers in clinical studies lack satisfactory results. It would be highly desirable to develop an effective therapy against MUC1-expressing cancers. In this study, we constructed a novel T cell-engaging bispecific antibody (BsAb) targeting MUC1 and CD3 with the Fab-ScFv-IgG format. A high quality of MUC1-CD3 BsAb can be acquired through a standard method. Our study suggested that this BsAb could specifically bind to MUC1- and CD3-positive cells and efficiently enhance T cell activation, cytokine release, and cytotoxicity. Furthermore, our study demonstrated that this BsAb could potently redirect T cells to eliminate MUC1-expressing tumor cells in vitro and significantly suppress MUC1-positive tumor growth in a xenograft mouse model. Thus, T cell-engaging MUC1/CD3 BsAb could be an effective therapeutic approach to combat MUC1-positive tumors and our MUC1/CD3 BsAb could be a promising candidate in clinical applications for the treatment of MUC1-positive cancer patients.

Generation of a symmetrical trispecific NK cell engager based on a two-in-one antibody

To construct a trispecific IgG-like antibody at least three different binding moieties need to be combined, which results in a complex architecture and challenging production of these molecules. Here we report for the first time the construction of trispecific natural killer cell engagers based on a previously reported two-in-one antibody combined with a novel anti-CD16a common light chain module identified by yeast surface display (YSD) screening of chicken-derived immune libraries. The resulting antibodies simultaneously target epidermal growth factor receptor (EGFR), programmed death-ligand 1 (PD-L1) and CD16a with two Fab fragments, resulting in specific cellular binding properties on EGFR/PD-L1 double positive tumor cells and a potent ADCC effect. This study paves the way for further development of multispecific therapeutic antibodies derived from avian immunization with desired target combinations, valencies, molecular symmetries and architectures.

A Generic Strategy to Generate Bifunctional Two-in-One Antibodies by Chicken Immunization

Various formats of bispecific antibodies exist, among them Two-in-One antibodies in which each Fab arm can bind to two different antigens. Their IgG-like architecture accounts for low immunogenicity and also circumvents laborious engineering and purification steps to facilitate correct chain pairing. Here we report for the first time the identification of a Two‐in‐One antibody by yeast surface display (YSD) screening of chicken-derived immune libraries. The resulting antibody simultaneously targets the epidermal growth factor receptor (EGFR) and programmed death‐ligand 1 (PD-L1) at the same Fv fragment with two non-overlapping paratopes. The dual action Fab is capable of inhibiting EGFR signaling by binding to dimerization domain II as well as blocking the PD-1/PD-L1 interaction. Furthermore, the Two-in-One antibody demonstrates specific cellular binding properties on EGFR/PD-L1 double positive tumor cells. The presented strategy relies solely on screening of combinational immune-libraries and obviates the need for any additional CDR engineering as described in previous reports. Therefore, this study paves the way for further development of therapeutic antibodies derived from avian immunization with novel and tailor-made binding properties.

Enabling the next steps in cancer immunotherapy: from antibody-based bispecifics to multispecifics, with an evolving role for bioconjugation chemistry

In the past two decades, immunotherapy has established itself as one of the leading strategies for cancer treatment, as illustrated by the exponentially growing number of related clinical trials. This trend was, in part, prompted by the clinical success of both immune checkpoint modulation and immune cell engagement, to restore and/or stimulate the patient's immune system's ability to fight the disease. These strategies were sustained by progress in bispecific antibody production. However, despite the decisive progress made in the treatment of cancer, toxicity and resistance are still observed in some cases. In this review, we initially provide an overview of the monoclonal and bispecific antibodies developed with the objective of restoring immune system functions to treat cancer (cancer immunotherapy), through immune checkpoint modulation, immune cell engagement or a combination of both. Their production, design strategy and impact on the clinical trial landscape are also addressed. In the second part, the concept of multispecific antibody formats, notably MuTICEMs (Multispecific Targeted Immune Cell Engagers & Modulators), as a possible answer to current immunotherapy limitations is investigated. We believe it could be the next step to take for cancer immunotherapy research and expose why bioconjugation chemistry might play a key role in these future developments.

Natural immunoglobulin M-based delivery of a complement alternative pathway inhibitor in mouse models of retinal degeneration

PURPOSE

Age-related macular degeneration is a slowly progressing disease. Studies have tied disease risk to an overactive complement system. We have previously demonstrated that pathology in two mouse models, the choroidal neovascularization (CNV) model and the smoke-induced ocular pathology (SIOP) model, can be reduced by specifically inhibiting the alternative complement pathway (AP). Here we report on the development of a novel injury-site targeted inhibitor of the alternative pathway, and its characterization in models of retinal degeneration.

METHODS

Expression of the danger associated molecular pattern, a modified annexin IV, in injured ARPE-19 cells was confirmed by immunohistochemistry and complementation assays using B4 IgM mAb. Subsequently, a construct was prepared consisting of B4 single chain antibody (scFv) linked to a fragment of the alternative pathway inhibitor, fH (B4-scFv-fH). ARPE-19 cells stably expressing B4-scFv-fH were microencapsulated and administered intravitreally or subcutaneously into C57BL/6 J mice, followed by CNV induction or smoke exposure. Progression of CNV was analyzed using optical coherence tomography, and SIOP using structure-function analyses. B4-scFv-fH targeting and AP specificity was assessed by Western blot and binding experiments.

RESULTS

B4-scFv-fH was secreted from encapsulated RPE and inhibited complement in RPE monolayers. B4-scFv-fH capsules reduced CNV and SIOP, and western blotting for breakdown products of C3α, IgM and IgG confirmed a reduction in complement activation and antibody binding in RPE/choroid.

CONCLUSIONS

Data supports a role for natural antibodies and neoepitope expression in ocular disease, and describes a novel strategy to target AP-specific complement inhibition to diseased tissue in the eye.

PRECIS

AMD risk is tied to an overactive complement system, and ocular injury is reduced by alternative pathway (AP) inhibition in experimental models. We developed a novel inhibitor of the AP that targets an injury-specific danger associated molecular pattern, and characterized it in disease models.

Immunological and anticancer activities of seleno-ovalbumin (Se-OVA) on H22-bearing mice

Ovalbumin is the main protein component of egg white. Selenium is one of the essential trace elements. In our research, ovalbumin was modified into seleno-ovalbumin. After seleno-modification, the FTIR spectrum of seleno-ovalbumin appeared two new absorption peaks which belonged to the characteristic absorption peaks of Se-O and SeO. Seleno-ovalbumin could reduce the damage of cancer to immune organs, improve the proliferation capacities of T and B lymphocytes, enhance the NK cells cytotoxicity and increase the phagocytic activity of peritoneal macrophages of H22-bearing mice. Besides, Se-OVA could block the cell cycle of solid tumors cells in G0/G1 phase and accelerate the apoptosis of solid tumors cells through mitochondrial pathway.

"BIClonals": Production of Bispecific Antibodies in IgG Format in Transiently Transfected Mammalian Cells

Bispecific antibodies (bsAbs) are antibodies with two binding sites directed at different antigens, enabling therapeutic strategies not possible with conventional monoclonal antibodies (mAbs). Since bispecific antibodies are regarded as promising therapeutic agents, many different bispecific design modalities have been evaluated. Many of these are based on antibody fragments or on inclusion of non-antibody components. For some therapeutic applications, full-size, native IgG-like bsAbs may be the optimal format.To prepare bsAbs in IgG format, two challenges should be met. One is that each heavy chain will only pair with the heavy chain of the second specificity and that heavy chain homodimerization will be prevented. The second is that each heavy chain will only pair with the light chain of its own specificity and that pairing with the light chain of the second specificity will be prevented. The first solution to the first criterion (known as knobs into holes, KIH) was presented in 1996 by Genentech and additional solutions were presented more recently. However, until recently, out of >120 published formats, only a handful of solutions for the second criterion that make it possible to produce a bispecific IgG by a single expressing cell were suggested.Here, we present a protocol for preparing bsAbs in IgG format in transfected mammalian cells. For heavy chain dimerization we use KIH while as a solution for the second challenge-correct pairing of heavy and light chains of bispecific IgGs we present our "BIClonals" technology; an engineered (artificial) disulfide bond between the antibodies' variable domains that asymmetrically replaces the natural disulfide bond between CH1 and CL.During our studies of bsAbs we found that H-L chain pairing seems to be driven by V_H-V_L interfacial interactions that differ between different antibodies; hence, there is no single optimal solution for effective and precise assembly of bispecific IgGs that suits every antibody sequence, making it necessary to carefully evaluate the optimal solution for each new antibody.

Therapeutic Antibody Engineering and Selection Strategies

Antibody drugs became an increasingly important element of the therapeutic landscape. Their accomplishment has been driven by many unique properties, in particular by their very high specificity and selectivity, in contrast to the off-target liabilities of small molecules (SMs). Antibodies can bring additional functionality to the table with their ability to interact with the immune system, and this can be further manipulated with advances in antibody engineering.The expansion of strategies related to discovery technologies of monoclonal antibodies (mAbs) (phage display, yeast display, ribosome display, bacterial display, mammalian cell surface display, mRNA display, DNA display, transgenic animal, and human B cell derived) opened perspectives for the screening and the selection of therapeutic antibodies for, theoretically, any target from any kind of organism. Moreover, antibody engineering technologies were developed and explored to obtain chosen characteristics of selected leading candidates such as high affinity, low immunogenicity, improved functionality, improved protein production, improved stability, and others. This chapter contains an overview of discovery technologies, mainly display methods and antibody humanization methods for the selection of therapeutic humanized and human mAbs that appeared along the development of these technologies and thereafter. The increasing applications of these technologies will be highlighted in the antibody engineering area (affinity maturation, guided selection to obtain human antibodies) giving promising perspectives for the development of future therapeutics.

Building blocks for bispecific and trispecific antibodies

Bispecific antibodies (BsAbs), which target two antigens or epitopes, incorporate the specificities and properties of two distinct monoclonal antibodies (mAbs) into a single molecule. As such, BsAbs can elicit synergistic activities and provide the capacity for enhanced therapeutic efficacy and/or safety compared to what can be achieved with conventional monospecific IgGs. There are many building block formats to generate BsAbs and Trispecific antibodies (TsAbs) based on combining the antigen recognition domains of monoclonal antibodies (mAbs). This review describes the many and varied antibody-based building blocks used to achieve multivalency and multispecificity. These diverse building blocks provide opportunities to tailor the design of BsAbs and TsAbs to match the desired applications.

Therapeutic bispecific antibody formats: a patent applications review (1994-2017)

INTRODUCTION

Bispecific antibodies have become increasingly of interest by enabling new therapeutic applications such as retargeting cellular immunity towards tumor cells. About 23 bispecific antibody platforms have therefore been developed, generating about 62 molecules which are currently being evaluated for potential treatment of a variety of indications, such as cancer and inflammatory diseases, among which three molecules were approved. This class of drugs will represent a multi-million-dollar market over the coming years. Many companies have consequently invested in the development of bispecific antibody platforms, creating an important patent activity in this field.

AREAS COVERED

The present review gives an overview of the patent literature over the period 1994-2017 of different immunoglobulin gamma-based bispecific antibody platforms and the molecules approved or in clinical trials.

EXPERT OPINION

Bispecific antibodies are progressively accepted as potentially superior therapeutic molecules in a broad range of diseases. This frantic activity creates a maze of hundreds of patents that pose considerable legal risks for both newcomers and established companies. It can consecutively be anticipated that the number of patent conflicts will increase. Nevertheless, it can be expected that patents related to the use of a bispecific antibody will have tremendous commercial value.

Synthetic integrin-binding immune stimulators target cancer cells and prevent tumor formation

Immuno-oncology approaches mainly utilize monoclonal antibodies or protein-based scaffolds that bind with high affinity to cancer cells and can generate an immune response. Peptides can also bind with high affinity to cancer cells and are intermediate in size between antibodies and small molecules. They are also synthetically accessible and therefore easily modified to optimize their stability, binding affinity and selectivity. Here we describe the design of immune system engagers (ISErs), a novel class of synthetic peptide-based compounds that bind specifically to cancer cells and stimulate the immune system. A prototype, Y9, targets integrin α₃, which is overexpressed on several cancer cells, and activates the immune system via a formyl methionine-containing effector peptide. Injection of Y9 leads to immune cell infiltration into tissue and prevents tumor formation in a guinea pig model. The anti-tumor activity and synthetic accessibility of Y9 illustrate that ISErs could be applied to a wide variety of targets and diseases.

Interferon dimers: IFN-PEG-IFN

Increasingly complex proteins can be made by a recombinant chemical approach where proteins that can be made easily can be combined by site-specific chemical conjugation to form multifunctional or more active protein therapeutics. Protein dimers may display increased avidity for cell surface receptors. The increased size of protein dimers may also increase circulation times. Cytokines bind to cell surface receptors that dimerise, so much of the solvent accessible surface of a cytokine is involved in binding to its target. Interferon (IFN) homo-dimers (IFN-PEG-IFN) were prepared by two methods: site-specific bis-alkylation conjugation of PEG to the two thiols of a native disulphide or to two imidazoles on a histidine tag of two His₈-tagged IFN (His₈IFN). Several control conjugates were also prepared to assess the relative activity of these IFN homo-dimers. The His₈IFN-PEG₂₀-His₈IFN obtained by histidine-specific conjugation displayed marginally greater in vitro antiviral activity compared to the IFN-PEG₂₀-IFN homo-dimer obtained by disulphide re-bridging conjugation. This result is consistent with previous observations in which enhanced retention of activity was made possible by conjugation to an N-terminal His-tag on the IFN. Comparison of the antiviral and antiproliferative activities of the two IFN homo-dimers prepared by disulphide re-bridging conjugation indicated that IFN-PEG₁₀-IFN was more biologically active than IFN-PEG₂₀-IFN. This result suggests that the size of PEG may influence the antiviral activity of IFN-PEG-IFN homo-dimers.

A native-like bispecific antibody suppresses the inflammatory cytokine response by simultaneously neutralizing tumor necrosis factor-alpha and interleukin-17A

Anti-tumor necrosis factor (TNF) therapies are successful in the treatment of inflammatory disorders. However, some patients with rheumatoid arthritis (RA) fail to response anti-TNF drugs due to the compensation of other inflammatory signals. In this study, to reduce compensatory responses of interleukin-17A (IL-17A) during TNF-α inhibition, we generated an IgG-like bispecific antibodiy (bsAb) against TNF-α and IL-17A through a combination method of electrostatic Fc pairing and light chain crossover. This bsAb exhibited relatively high stability comparable to natural IgG antibodies, and retained the unaltered affinities to both of two targets. BsAb significantly decreased not only the expression level of neutrophil or Th17 chemokines, but also the secretion of IL-6/IL-8 on fibroblast-like synoviocytes (FLS) from a patient with RA. Meanwhile, TNF-α-mediated cellular cytotoxicity of fibroblasts was neutralized by bsAb. Importantly, we demonstrate that the combined blockade of TNF-α and IL-17A is more efficient than inhibition of either factor alone. Our results suggest the IgG-like anti-TNF-α/IL-17A bispecific molecule overcome the limited therapeutic responses using anti-TNF drugs. It may be a promising therapeutic agent for the treatment of autoimmune diseases.

A single-domain antibody-linked Fab bispecific antibody Her2-S-Fab has potent cytotoxicity against Her2-expressing tumor cells

Her2, which is frequently overexpressed in breast cancer, is one of the most studied tumor-associated antigens for cancer therapy. Anti-HER2 monoclonal antibody, trastuzumab, has achieved significant clinical benefits in metastatic breast cancer. In this study, we describe a novel bispecific antibody Her2-S-Fab targeting Her2 by linking a single domain anti-CD16 VHH to the trastuzumab Fab. The Her2-S-Fab antibody can be efficiently expressed and purified from Escherichia coli, and drive potent cancer cell killing in HER2-overexpressing cancer cells. In xenograft model, the Her2-S-Fab suppresses tumor growth in the presence of human immune cells. Our results suggest that the bispecific Her2-S-Fab may provide a valid alternative to Her2 positive cancer therapy.

Bispecific antibodies for viral immunotherapy

Bispecific antibody engineering, in which binding specificities toward 2 distinct epitopes are combined into a single molecule, can greatly enhance immunotherapeutic properties of monoclonal antibodies. While the bispecific antibody approach has been applied widely to targets for indications such as cancer and inflammation, the development of such agents for viral immunotherapy is only now emerging. Here, we review recent advances in the development of bispecific antibodies for viral immunotherapy, highlighting promising in vitro and in vivo results.

Dual anti-idiotypic purification of a novel, native-format biparatopic anti-MET antibody with improved in vitro and in vivo efficacy

Bispecific antibodies are of great interest due to their ability to simultaneously bind and engage different antigens or epitopes. Nevertheless, it remains a challenge to assemble, produce and/or purify them. Here we present an innovative dual anti-idiotypic purification process, which provides pure bispecific antibodies with native immunoglobulin format. Using this approach, a biparatopic IgG1 antibody targeting two distinct, HGF-competing, non-overlapping epitopes on the extracellular region of the MET receptor, was purified with camelid single-domain antibody fragments that bind specifically to the correct heavy chain/light chain pairings of each arm. The purity and functionality of the anti-MET biparatopic antibody was then confirmed by mass spectrometry and binding experiments, demonstrating its ability to simultaneously target the two epitopes recognized by the parental monoclonal antibodies. The improved MET-inhibitory activity of the biparatopic antibody compared to the parental monoclonal antibodies, was finally corroborated in cell-based assays and more importantly in a tumor xenograft mouse model. In conclusion, this approach is fast and specific, broadly applicable and results in the isolation of a pure, novel and native-format anti-MET biparatopic antibody that shows superior biological activity over the parental monospecific antibodies both in vitro and in vivo.

A bispecific antibody targeting CD47 and CD20 selectively binds and eliminates dual antigen expressing lymphoma cells

Agents that block the anti-phagocytic signal CD47 can synergize with pro-phagocytic anti-tumor antigen antibodies to potently eliminate tumors. While CD47 is overexpressed on cancer cells, its expression in many normal tissues may create an 'antigen sink' that could minimize the therapeutic efficacy of CD47 blocking agents. Here, we report development of bispecific antibodies (BsAbs) that co-target CD47 and CD20, a therapeutic target for non-Hodgkin lymphoma (NHL), that have reduced affinity for CD47 relative to the parental antibody, but retain strong binding to CD20. These characteristics facilitate selective binding of BsAbs to tumor cells, leading to phagocytosis. Treatment of human NHL-engrafted mice with BsAbs reduced lymphoma burden and extended survival while recapitulating the synergistic efficacy of anti-CD47 and anti-CD20 combination therapy. These findings serve as proof of principle for BsAb targeting of CD47 with tumor-associated antigens as a viable strategy to induce selective phagocytosis of tumor cells and recapitulate the synergy of combination antibody therapy. This approach may be broadly applied to cancer to add a CD47 blocking component to existing antibody therapies.

Pegylated Trastuzumab Fragments Acquire an Increased in Vivo Stability but Show a Largely Reduced Affinity for the Target Antigen

PEGylation of biomolecules is a major approach to increase blood stream half-life, stability and solubility of biotherapeutics and to reduce their immunogenicity, aggregation potential and unspecific interactions with other proteins and tissues. Antibodies have generally long half-lives due to high molecular mass and stability toward proteases, however their size lowers to some extent their potential because of a reduced ability to penetrate tissues, especially those of tumor origin. Fab or otherwise engineered smaller fragments are an alternative but are less stable and are much less well retained in circulation. We have here investigated the effects of various PEGylations on the binding properties and in vivo half-life of Fab fragments derived from the enzymatic splitting of Trastuzumab. We find that PEGylation increases the half-life of the molecules but also strongly affects the ability to recognize the target antigen in a way that is dependent on the extent and position of the chemical modification. Data thus support the concept that polyethylene glycol (PEG) conjugation on Trastuzumab Fabs increases half-life but reduces their affinity and this is a fine balance, which must be carefully considered for the design of strategies based on the use of antibody fragments.

Protein design of IgG/TCR chimeras for the co-expression of Fab-like moieties within bispecific antibodies

Immunoglobulins and T cell receptors (TCRs) share common sequences and structures. With the goal of creating novel bispecific antibodies (BsAbs), we generated chimeric molecules, denoted IgG_TCRs, where the Fv regions of several antibodies were fused to the constant domains of the α/β TCR. Replacing CH1 with Cα and CL with Cβ, respectively, was essential for achieving at least partial heavy chain/light chain assembly. Further optimization of the linker regions between the variable and constant domains, as well as replacement of the large FG loop of Cβ with a canonical β-turn, was necessary to consistently obtain full heavy chain/light chain assembly. The optimized IgG_TCR molecules were evaluated biophysically and shown to maintain the binding properties of their parental antibodies. A few BsAbs were generated by co-expressing native Fabs and IgG_TCR Fabs within the same molecular construct. We demonstrate that the IgG_TCR designs steered each of the light chains within the constructs to specifically pair with their cognate heavy chain counterparts. We did find that even with complete constant domain specificity between the CH1/CL and Cα/Cβ domains of the Fabs, strong variable domain interactions can dominate the pairing specificity and induce some mispairing. Overall, the IgG_TCR designs described here are a first step toward the generation of novel BsAbs that may be directed toward the treatment of multi-faceted and complex diseases.

Exploiting light chains for the scalable generation and platform purification of native human bispecific IgG

Bispecific antibodies enable unique therapeutic approaches but it remains a challenge to produce them at the industrial scale, and the modifications introduced to achieve bispecificity often have an impact on stability and risk of immunogenicity. Here we describe a fully human bispecific IgG devoid of any modification, which can be produced at the industrial scale, using a platform process. This format, referred to as a κλ-body, is assembled by co-expressing one heavy chain and two different light chains, one κ and one λ. Using ten different targets, we demonstrate that light chains can play a dominant role in mediating specificity and high affinity. The κλ-bodies support multiple modes of action, and their stability and pharmacokinetic properties are indistinguishable from therapeutic antibodies. Thus, the κλ-body represents a unique, fully human format that exploits light-chain variable domains for antigen binding and light-chain constant domains for robust downstream processing, to realize the potential of bispecific antibodies.

Bispecific antibodies allow for novel therapeutic approaches but industrial-scale production and immunogenicity represent significant challenges. Here Fischer et al. describe a unique human bispecific antibody format that exploits differing light chains to overcome these obstacles.

Construction and production of an IgG-Like tetravalent bispecific antibody, IgG-single-chain Fv fusion

In recent years, both laboratory and clinical studies have demonstrated that bispecific antibodies (BsAbs) may have significant potential application in cancer therapy either by targeting tumor cells with cytotoxic agents including effector cells, radionuclides, drugs, and toxins, or by simultaneously blocking two tumor-associated targets, e.g., tumor growth factors and/or their cell surface receptors. A major obstacle in the development of BsAb has been the difficulty of producing the materials in sufficient quality and quantity by traditional technologies such as the hybrid hybridoma and chemical conjugation methods. The development of recombinant BsAbs as therapeutic agents will depend heavily on the advances made in the design of the constructs (or formats) and production efficiency. Here we describe a recombinant method for the construction and production of a tetravalent IgG-like BsAb molecule, IgG-scFv fusion, in which, a single-chain Fv (scFv) antibody fragment of one antigen specificity is genetically fused to the c-terminal of a conventional IgG of a different antigen specificity.

LUZ-Y, a novel platform for the mammalian cell production of full-length IgG-bispecific antibodies

The ability of bispecific antibodies to simultaneously bind two unique antigens has great clinical potential. However, most approaches utilized to generate bispecific antibodies yield antibody-like structures that diverge significantly from the structure of archetype human IgG, and those that do approach structural similarity to native antibodies are often challenging to engineer and manufacture. Here, we present a novel platform for the mammalian cell production of bispecific antibodies that differ from their parental mAbs by only a single point mutation per heavy chain. Central to this platform is the addition of a leucine zipper to the C terminus of the C(H)3 domain of the antibody that is sufficient to drive the heterodimeric assembly of antibody heavy chains and can be readily removed post-purification. Using this approach, we developed various antibody constructs including one-armed Abs, bispecific antibodies that utilize a common light chain, and bispecific antibodies that pair light chains to their cognate heavy chains via peptide tethers. We have applied this technology to various antibody pairings and will demonstrate the engineering, purification, and biological activity of these antibodies herein.

Comparative binding of disulfide-bridged PEG-Fabs

Protein PEGylation is the most clinically validated method to improve the efficacy of protein-based medicines. Antibody fragments such as Fabs display rapid clearance from blood circulation and therefore are good candidates for PEGylation. We have developed PEG-bis-sulfone reagents 1 that can selectively alkylate both sulfurs derived from a native disulfide. Using PEG-bis-sulfone reagents 1, conjugation of PEG specifically targets the disulfide distal to the binding region of the Fab (Scheme 2 ). PEG-bis-sulfone reagents 1 (10-40 kDa) were used to generate the corresponding PEG-mono-sulfones 2 that underwent essentially quantitative conjugation to give the PEG-Fab product 4. Four Fabs were PEGylated: Fab(beva), Fab'(beva), Fab(rani), and Fab(trast). Proteolytic digestion of bevacizumab with papain gave Fab(beva), while digestion of bevacizumab with IdeS gave F(ab')(2-beva), which after reaction with DTT and PEG-mono-sulfone 2 gave PEG(2)-Fab'(beva). Ranibizumab, which is a clinically used Fab, was directly PEGylated to give PEG-Fab(rani). Trastuzumab was proteolytically digested with papain, and its corresponding Fab was PEGylated to give PEG-Fab(trast). Purification of the PEGylated Fabs was accomplished by a single ion exchange chromatography step to give pure PEG-Fab products as determined by silver-stained SDS-PAGE. No loss of PEG was detected post conjugation. A comparative binding study by SPR using Biacore with low ligand immobilization density was conducted using (i) VEGF(165) for the bevacizumab and ranibizumab derived products or (ii) HER2 for the trastuzumab derived products. VEGF(165) is a dimeric ligand with two binding sites for bevacizumab. HER2 has one domain for the binding of trastuzumab. Binding studies with PEG-Fab(beva) indicated that the apparent affinity was 2-fold less compared to the unPEGylated Fab(beva). Binding properties of the PEG-Fab(beva) products appeared to be independent of PEG molecular weight. Site-specific conjugation of two PEG molecules gave PEG(2×20)-Fab'(beva), whose apparent binding affinity was similar to that observed for PEG-Fab(beva) derivatives. The k(d) values were similar to those of the unPEGylated Fab(beva); hence, once bound, PEG-Fab(beva) remained bound to the same degree as Fab(beva). Biacore analysis indicated that both Fab(rani) and PEG(20)-Fab(rani) did not dissociate from the immobilized VEGF at 25 °C, but ELISA using immobilized VEGF showed 2-fold less apparent binding affinity for PEG(20)-Fab(rani) compared to the unPEGylated Fab(rani). Additionally, the apparent binding affinities for trastuzumab and Fab(trast) were comparable by both Biacore and ELISA. Biacore results suggested that trastuzumab had a slower association rate compared to Fab(trast); however, both molecules displayed the same apparent binding affinity. This could have been due to enhanced rebinding effects of trastuzumab, as it is a bivalent molecule. Analogous to PEG-Fab(beva) products, PEG(20)-Fab(trast) displayed 2-fold lower binding compared to Fab(trast) when evaluated by ELISA. The variations in the apparent affinity for the PEGylated Fab variants were all related to the differences in the association rates (k(a)) rather than the dissociation rates (k(d)). We have shown that (i) Fabs are well-matched for site-specific PEGylation with our bis-alkylation PEG reagents, (ii) PEGylated Fabs display only a 2-fold reduction in apparent affinity without any change in the dissociation rate, and (iii) the apparent binding rates and affinities remain constant as the PEG molecular weight is varied.

T and NK cells of B cell NHL patients exert cytotoxicity against lymphoma cells following binding of bispecific tetravalent antibody CD19 × CD3 or CD19 × CD16

Bispecific tetravalent antibodies (TandAb) directed against the B cell surface marker CD19 and activating receptors on T or NK cells (CD19 × CD3 or CD19 × CD16) have shown promising effects in vitro and in preclinical studies. Here, we examine the cytotoxic efficacy of T and NK cells from patients with B cell Non-Hodgkin's Lymphoma (NHL) against B-lymphoma cells following the binding of the matching TandAb. The addition of CD19 × CD16 TandAb led to a threefold increase in NK cell activation in the presence of B-lymphoma cells. Similarly, T cells displayed a sevenfold increase in cytotoxic activity after the addition of CD19 × CD3 TandAb. Comparison of T and NK cell effector function of patients and healthy controls showed comparable levels of cytotoxic activity in response to lymphoma cells and no reduction in functional activity due to age, disease stage or the type and amount of previous therapy. Thus, T and NK cells of patients with B cell NHL are fully capable of being activated by therapeutic crosslinking antibodies. These results provide a rationale for the use of TandAbs for patients with B cell NHL, particularly in cases where remission with minimal residual disease could be achieved by cytotoxic chemotherapy.

Progress in overcoming the chain association issue in bispecific heterodimeric IgG antibodies

The development of bispecific antibodies has attracted substantial interest, and many different formats have been described. Those specifically containing an Fc part are mostly tetravalent, such as stabilized IgG-scFv fusions or dual-variable domain (DVD) IgGs. However, although they exhibit IgG-like properties and technical developability, these formats differ in size and geometry from classical IgG antibodies. Thus, considerable efforts focus on bispecific heterodimeric IgG antibodies that more closely mimic natural IgG molecules. The inherent chain association problem encountered when producing bispecific heterodimeric IgG antibodies can be overcome by several methods. While technologies like knobs-into-holes (KiH) combined with a common light chain or the CrossMab technology enforce the correct chain association, other approaches, e.g., the dual-acting Fab (DAF) IgGs, do not rely on a heterodimeric Fc part. This review discusses the state of the art in bispecific heterodimeric IgG antibodies, with an emphasis on recent progress.

Simultaneous targeting of TNF and Ang2 with a novel bispecific antibody enhances efficacy in an in vivo model of arthritis

Despite the clinical success of anti-tumor necrosis factor (TNF) therapies in the treatment of inflammatory conditions such as rheumatoid arthritis, Crohn disease and psoriasis, full control of the diseases only occurs in a subset of patients and there is a need for new therapeutics with improved efficacy against broader patient populations. One possible approach is to combine biological therapeutics, but both the cost of the therapeutics and the potential for additional toxicities needs to be considered. In addition to the various mediators of immune and inflammatory pathways, angiogenesis is reported to contribute substantially to the overall pathogenesis of inflammatory diseases. The combination of an anti-angiogenic agent with anti-TNF into one molecule could be more efficacious without the risk of severe immunosuppression. To evaluate this approach with our Zybody technology, we generated bispecific antibodies that contain an Ang2 targeting peptide genetically fused to the anti-TNF antibody adalimumab (Humira®). The bispecific molecules retain the binding and functional characteristics of the anti-TNF antibody, but with additional activity that neutralizes Ang2. In a TNF transgenic mouse model of arthritis, the bispecific anti-TNF-Ang2 molecules showed a dose-dependent reduction in both clinical symptoms and histological scores that were significantly better than that achieved by adalimumab alone.

Smarter drugs: a focus on pan-specific monoclonal antibodies

Antibodies capable of targeting more than one antigen are envisioned to expand therapeutic efficacy in complex disease settings. Several strategies have been developed to achieve multiple targeting, including antibody mixtures and bispecific formats. In recent years, several dual- and pan-specific antibodies have been described and represent an alternative approach. These antibodies bind to different targets using a single antigen-combining site while maintaining high affinity and specificity, thus challenging the 'one antibody, one antigen' dogma. Despite certain drawbacks, the simple IgG format of this drug class enables rapid progression into the clinic.

Secretion from bacterial versus mammalian cells yields a recombinant scFv with variable folding properties

Escherichia coli (E. coli) is the most commonly used organism for expressing antibody fragments such as single chain antibody Fvs (scFvs). Previously, we have utilized E. coli to express well-folded scFvs for characterization and engineering purposes with the goal of using these engineered proteins as building blocks for generating IgG-like bispecific antibodies (BsAbs). In the study, described here, we observed a significant difference in the secondary structure of an scFv produced in E. coli and the same scFv expressed and secreted from chinese hamster ovary (CHO) cells as part of a BsAb. We devised a proteolytic procedure to separate the CHO-derived scFv from its antibody-fusion partner and compared its properties with those of the E. coli-derived scFv. In comparison to the CHO-derived scFv, the E. coli-derived scFv was found trapped in a misfolded, but monomeric state that was stable for months at 4 °C. The misfolded state bound antigen in a heterogeneous fashion that included non-specific binding, which made functional characterization challenging. This odd incidence of obtaining a misfolded scFv from bacteria suggests careful characterization of the folded properties of bacterially expressed scFvs is warranted if anomalous issues with antigen-binding or non-specificity occur during an engineering campaign. Additionally, our proteolytic methodology for obtaining significant levels of intact scFvs from highly expressed IgG-like antibody proteins serves as a robust method for producing scFvs in CHO without the use of designed cleavage motifs.

Bispecific antibody derivatives based on full-length IgG formats

Monoclonal antibodies have emerged as an effective therapeutic modality, and numerous antibodies have been approved for the treatment of several severe diseases or are currently in clinical development. To improve their therapeutic potential, monoclonal antibodies are constantly evolved by protein engineering. Particularly, the generation of bispecific antibodies raised special interest because of their ability to bind two different antigens at the same time, and the efficiency of these formats has been demonstrated in several clinical and preclinical studies. Up to now, the major drawbacks in using bispecific antibodies as a therapeutic agent have been difficult design and low-yield expression of homogeneous antibody populations. However, major technological improvements were made in protein engineering during the last years. This allows the design of several new IgG-based bispecific antibody formats that can be prepared in high yields and high homogeneity using conventional expression and purification techniques. Especially, recent development of IgG-fusions with disulfide-stabilized Fv fragments and of CrossMab-technologies facilitates the generation of bispecific antibodies with IgG-like architectures. Here we describe design principles and methods to express and purify different bispecific antibody formats derived from full-length IgGs.

Targeting of cancer stem cell marker EpCAM by bispecific antibody EpCAMxCD3 inhibits pancreatic carcinoma

Patients with pancreatic cancer have a poor survival rate, and new therapeutic strategies are needed. Epithelial cell adhesion molecule (EpCAM), suggested as a marker for cancer stem cells, is over-expressed on most pancreatic tumour cells but not on normal cells and may be an ideal therapeutic target. We evaluated the anti-tumour efficiency of bispecific EpCAMxCD3 antibody linking tumour cells and T lymphocytes. In NOD SCID mice, EpCAMxCD3 had a long serum half-life (t_1/2∼ 7 days). EpCAMxCD3 significantly retarded growth of BxPC-3 pancreatic carcinoma xenografts. For mimicking a pancreatic cancer microenvironment in vitro, we used a three-dimensional tumour reconstruct system, in which lymphocytes were co-cultured with tumour cells and fibroblasts in a collagen matrix. In this in vivo–like system, EpCAMxCD3 potently stimulated production of the effector cytokines IFN-γ and TNF-α by extracorporally pre-activated lymphocytes. Moreover, compared with a bivalent anti-CD3 antibody, EpCAMxCD3 more efficiently activated the production of TNF-α and IFN-γ by non-stimulated peripheral blood mononuclear cells. Most excitingly, we demonstrate for the first time that EpCAMxCD3 induces prolonged contacts between lymphocytes and tumour cells, which may be the main reason for the observed anti-tumour effects. As an important prerequisite for future use in patients, EpCAMxCD3 did not alter lymphocyte migration as measured by time-lapse video microscopy. Our data may open a way to improve the immune response and treatment outcome in patients with pancreatic cancer.

Dual specificity of anti-CXCL10-CXCL9 antibodies is governed by structural mimicry

Dual-specific antibodies are characterized by an antigen-combining site mediating specific interactions with two different antigens. We have generated five dual-specific single chain variable fragments (scFv) that neutralize the activity of the two chemokines, CXCL9 and CXCL10, to bind to their receptor CXCR3. To better understand how these dual-specific scFvs bind these two chemokines that only share a 37% sequence identity, we mapped their epitopes on human CXCL9 and CXCL10 and identified serine 13 (Ser(13)) as a critical residue. It is conserved between the two chemokines but not in the third ligand for CXCR3, CXCL11. Furthermore, Ser(13) is exposed in the tetrameric structure of CXCL10, which is consistent with our finding that the scFvs are able to bind to CXCL9 and CXCL10 immobilized on glycosaminoglycans. Overall, the data indicate that these dual-specific scFvs bind to a conserved surface involved in CXCR3 receptor interaction for CXCL10 and CXCL9. Thus, structural mimicry between the two targets is likely to be responsible for the observed dual specificity of these antibody fragments.

Therapeutic assessment of SEED: a new engineered antibody platform designed to generate mono- and bispecific antibodies

The strand-exchange engineered domain (SEED) platform was designed to generate asymmetric and bispecific antibody-like molecules, a capability that expands therapeutic applications of natural antibodies. This new protein engineered platform is based on exchanging structurally related sequences of immunoglobulin within the conserved CH3 domains. Alternating sequences from human IgA and IgG in the SEED CH3 domains generate two asymmetric but complementary domains, designated AG and GA. The SEED design allows efficient generation of AG/GA heterodimers, while disfavoring homodimerization of AG and GA SEED CH3 domains. Using a clinically validated antibody (C225), we tested whether Fab derivatives constructed on the SEED platform retain desirable therapeutic antibody features such as in vitro and in vivo stability, favorable pharmacokinetics, ligand binding and effector functions including antibody-dependent cell-mediated cytotoxicity and complement-dependent cytotoxicity. In addition, we tested SEED with combinations of binder domains (scFv, VHH, Fab). Mono- and bivalent Fab-SEED fusions retain full binding affinity, have excellent biochemical and biophysical stability, and retain desirable antibody-like characteristics conferred by Fc domains. Furthermore, SEED is compatible with different combinations of Fab, scFv and VHH domains. Our assessment shows that the new SEED platform expands therapeutic applications of natural antibodies by generating heterodimeric Fc-analog proteins.

Synthesis and evaluation of an anti-MLC1 × anti-CD90 bispecific antibody for targeting and retaining bone-marrow-derived multipotent stromal cells in infarcted myocardium

A key issue regarding the use of stem cells in cardiovascular regenerative medicine is their retention in target tissues. Here, we have generated and assessed a bispecific antibody heterodimer designed to improve the retention of bone-marrow-derived multipotent stromal cells (BMMSC) in cardiac tissue damaged by myocardial infarction. The heterodimer comprises an anti-human CD90 monoclonal antibody (mAb) (clone 5E10) and an anti-myosin light chain 1 (MLC1) mAb (clone MLM508) covalently cross-linked by a bis-arylhydrazone. We modified the anti-CD90 antibody with a pegylated-4-formylbenzamide moiety to a molar substitution ratio (MSR) of 2.6 and the anti-MLC1 antibody with a 6-hydrazinonicotinamide moiety to a MSR of 0.9. The covalent modifications had no significant deleterious effect on mAb epitope binding. Furthermore, the binding of anti-CD90 antibody to BMMSCs did not prevent their differentiation into adipo-, chondro-, or osteogenic lineages. Modified antibodies were combined under mild conditions (room temperature, pH 6, 1 h) in the presence of a catalyst (aniline) to allow for rapid generation of the covalent bis-arylhydrazone, which was monitored at A(354). We evaluated epitope immunoreactivity for each mAb in the construct. Flow cytometry demonstrated binding of the bispecific construct to BMMSCs that was competed by free anti-CD90 mAb, verifying that modification and cross-linking were not detrimental to the anti-CD90 complementarity-determining region. Similarly, ELISA-based assays demonstrated bispecific antibody binding to plastic-immobilized recombinant MLC1. Excess anti-MLC1 mAb competed for bispecific antibody binding. Finally, the anti-CD90 × anti-MLC1 bispecific antibody construct induced BMMSC adhesion to plastic-immobilized MLC1 that was resistant to shear stress, as measured in parallel-plate flow chamber assays. We used mAbs that bind both human antigens and the respective pig homologues. Thus, the anti-CD90 × anti-MLC1 bispecific antibody may be used in large animal studies of acute myocardial infarction and may provide a starting point for clinical studies.

Antagonistic VEGF variants engineered to simultaneously bind to and inhibit VEGFR2 and alphavbeta3 integrin

Significant cross-talk exists between receptors that mediate angiogenesis, such as VEGF receptor-2 (VEGFR2) and α(v)β(3) integrin. Thus, agents that inhibit both receptors would have important therapeutic potential. Here, we used an antagonistic VEGF ligand as a molecular scaffold to engineer dual-specific proteins that bound to VEGFR2 and α(v)β(3) integrin with antibody-like affinities and inhibited angiogenic processes in vitro and in vivo. Mutations were introduced into a single-chain VEGF (scVEGF) ligand that retained VEGFR2 binding, but prevented receptor dimerization and activation. Yeast-displayed scVEGF mutant libraries were created and screened by high-throughput flow cytometric sorting to identify several variants that bound with high affinity to both VEGFR2 and α(v)β(3) integrin. These engineered scVEGF mutants were specific for α(v)β(3) integrin and did not bind to the related integrins α(v)β(5), α(iib)β(3), or α(5)β(1). In addition, surface plasmon resonance and cell binding assays showed that dual-specific scVEGF proteins can simultaneously engage both receptors. Compared to monospecific scVEGF mutants that bind VEGFR2 or α(v)β(3) integrin, dual-specific scVEGF proteins more strongly inhibited VEGF-mediated receptor phosphorylation, capillary tube formation, and proliferation of endothelial cells cultured on Matrigel or vitronectin-coated surfaces. Moreover, dual specificity conferred strong inhibition of VEGF-mediated blood vessel formation in Matrigel plugs in vivo, whereas monospecific scVEGF mutants that bind VEGFR2 or α(v)β(3) integrin were only marginally effective. Instead of relying on antibody associating domains or physical linkage, this work highlights an approach to creating dual-specific proteins where additional functionality is introduced into a protein ligand to complement its existing biological properties.

Emerging antibody combinations in oncology

The use of monoclonal antibodies (mAbs) has become a general approach for specifically targeting and treating human disease. In oncology, the therapeutic utility of mAbs is usually evaluated in the context of treatment with standard of care, as well as other small molecule targeted therapies. Many anti-cancer antibody modalities have achieved validation, including the targeting of growth factor and angiogenesis pathways, the induction of tumor cell killing or apoptosis, and the blocking of immune inhibitory mechanisms to stimulate anti-tumor responses. But, as with other targeted therapies, few antibodies are curative because of biological complexities that underlie tumor formation and redundancies in molecular pathways that enable tumors to adapt and show resistance to treatment. This review discusses the combinations of antibody therapeutics that are emerging to improve efficacy and durability within a specific biological mechanism (e.g., immunomodulation or the inhibition of angiogenesis) and across multiple biological pathways (e.g., inhibition of tumor growth and induction of tumor cell apoptosis).

Stable IgG-like bispecific antibodies directed toward the type I insulin-like growth factor receptor demonstrate enhanced ligand blockade and anti-tumor activity

Bispecific antibodies (BsAbs) target multiple epitopes on the same molecular target or different targets. Although interest in BsAbs has persisted for decades, production of stable and active BsAbs has hindered their clinical evaluation. Here, we describe the production and characterization of tetravalent IgG-like BsAbs that combine the activities of allosteric and competitive inhibitors of the type-I insulin-like growth factor receptor (IGF-1R). The BsAbs, which were engineered for thermal stability, express well, demonstrate favorable biophysical properties, and recognize both epitopes on IGF-1R. Only one BsAb with a unique geometry, denoted BIIB4-5scFv, was capable of engaging all four of its binding arms simultaneously. All the BsAbs (especially BIIB4-5scFv) demonstrated enhanced ligand blocking over the single monoclonal antibodies (mAbs), particularly at high ligand concentrations. The pharmacokinetic profiles of two IgG-like BsAbs were tested in nude mice and shown to be comparable with that of the parental mAbs. The BsAbs, especially BIIB4-5scFv, demonstrated an improved ability to reduce the growth of multiple tumor cell lines and to inhibit ligand-induced IGF-1R signaling in tumor cells over the parental mAbs. BIIB4-5scFv also led to superior tumor growth inhibition over its parental mAbs in vivo. In summary, BsAbs that bridge multiple inhibitory mechanisms against a single target may generally represent a more effective strategy for intervention in oncology or other indications compared with traditional mAb therapy.

Chemical generation of bispecific antibodies

Bispecific antibodies (BsAbs) are regarded as promising therapeutic agents due to their ability to simultaneously bind two different antigens. Several bispecific modalities have been developed, but their utility is limited due to problems with stability and manufacturing complexity. Here we report a versatile technology, based on a scaffold antibody and pharmacophore peptide heterodimers, that enables rapid generation and chemical optimization of bispecific antibodies, which are termed bispecific CovX-Bodies. Two different peptides are joined together using a branched azetidinone linker and fused to the scaffold antibody under mild conditions in a site-specific manner. Whereas the pharmacophores are responsible for functional activities, the antibody scaffold imparts long half-life and Ig-like distribution. The pharmacophores can be chemically optimized or replaced with other pharmacophores to generate optimized or unique bispecific antibodies. As a prototype, we developed a bispecific antibody that binds both vascular endothelial growth factor (VEGF) and angiopoietin-2 (Ang2) simultaneously, inhibits their function, shows efficacy in tumor xenograft studies, and greatly augments the antitumor effects of standard chemotherapy. This unique antiangiogenic bispecific antibody is in phase-1 clinical trials.

Her2-specific multivalent adapters confer designed tropism to adenovirus for gene targeting

Adenoviruses (Ads) hold great promise as gene vectors for diagnostic or therapeutic applications. The native tropism of Ads must be modified to achieve disease site-specific gene delivery by Ad vectors and this should be done in a programmable way and with technology that can realistically be scaled up. To this end, we applied the technologies of designed ankyrin repeat proteins (DARPins) and ribosome display to develop a DARPin that binds the knob domain of the Ad fiber protein with low nanomolar affinity (K(D) 1.35 nM) and fused this protein with a DARPin specific for Her2, an established cell-surface biomarker of human cancers. The stability of the complex formed by this bispecific targeting adapter and the Ad virion resulted in insufficient gene transfer and was subsequently improved by increasing the valency of adapter-virus binding. In particular, we designed adapters that chelated the knob in a bivalent or trivalent fashion and showed that the efficacy of gene transfer by the adapter-Ad complex increased with the functional affinity of these molecules. This enabled efficient transduction at low stoichiometric adapter-to-fiber ratios. We confirmed the Her2 specificity of this transduction and its dependence on the Her2-binding DARPin component of the adapters. Even the adapter molecules with four fused DARPins could be produced and purified from Escherichia coli at very high levels. In principle, DARPins can be generated against any target and this adapter approach provides a versatile strategy for developing a broad range of disease-specific gene vectors.

Engineered proteins pull double duty

Myriad bi-specific proteins have been developed that recognize two different clinical targets, with the goal of achieving enhanced therapeutic effects as compared with proteins that interact with only one target. These engineered proteins are starting to enter clinical testing for a variety of biomedical applications, particularly cancer treatment.

Stability engineering of scFvs for the development of bispecific and multivalent antibodies

Single-chain Fvs (scFvs) are commonly used building blocks for creating engineered diagnostic and therapeutic antibody molecules. Bispecific antibodies (BsAbs) hold particular interest due to their ability to simultaneously bind and engage two distinct targets. We describe a technology for producing stable, scalable IgG-like bispecific and multivalent antibodies based on methods for rapidly engineering thermally stable scFvs. Focused libraries of mutant scFvs were designed using a combination of sequence-based statistical analyses and structure-, and knowledge-based methods. Libraries encoding these designs were expressed in E. coli and culture supernatants-containing soluble scFvs screened in a high-throughput assay incorporating a thermal challenge prior to an antigen-binding assay. Thermally stable scFvs were identified that retain full antigen-binding affinity. Single mutations were found that increased the measured T(m) of either the V(H) or V(L) domain by as much as 14 degrees C relative to the wild-type scFv. Combinations of mutations further increased the T(m) by as much as an additional 12 degrees C. Introduction of a stability-engineered scFv as part of an IgG-like BsAb enabled scalable production and purification of BsAb with favorable biophysical properties.

A dual-targeting PDGFRbeta/VEGF-A molecule assembled from stable antibody fragments demonstrates anti-angiogenic activity in vitro and in vivo

Targeting angiogenesis is a promising approach to the treatment of solid tumors and age-related macular degeneration (AMD). Inhibition of vascularization has been validated by the successful marketing of monoclonal antibodies (mAbs) that target specific growth factors or their receptors, but there is considerable room for improvement in existing therapies. Combination of mAbs targeting both the VEGF and PDGF pathways has the potential to increase the efficacy of anti-angiogenic therapy without the accompanying toxicities of tyrosine kinase inhibitors and the inability to combine efficiently with traditional chemotherapeutics. However, development costs and regulatory issues have limited the use of combinatorial approaches for the generation of more efficacious treatments. The concept of mediating disease pathology by targeting two antigens with one therapeutic was proposed over two decades ago. While mAbs are particularly suitable candidates for a dual-targeting approach, engineering bispecificity into one molecule can be difficult due to issues with expression and stability, which play a significant role in manufacturability. Here, we address these issues upstream in the process of developing a bispecific antibody (bsAb). Single-chain antibody fragments (scFvs) targeting PDGFRbeta and VEGF-A were selected for superior stability. The scFvs were fused to both termini of human Fc to generate a bispecific, tetravalent molecule. The resulting molecule displays potent activity, binds both targets simultaneously, and is stable in serum. The assembly of a bsAb using stable monomeric units allowed development of an anti-PDGFRB/VEGF-A antibody capable of attenuating angiogenesis through two distinct pathways and represents an efficient method for rapid engineering of dual-targeting molecules.

Specificity tuning of antibody fragments to neutralize two human chemokines with a single agent

Chemokines are important mediators of the immune response that are responsible for the trafficking of immune cells between lymphoid organs and migration towards sites of inflammation.Using phage display selection and a functional screening approach, we have isolated a panel of single-chain fragment variable (scFv) capable of neutralizing the activity of the human chemokine CXCL10 (hCXCL10). One of the isolated scFv was weakly cross-reactive against another human chemokine CXCL9,but was unable to block its biological activity. We diversified the complementarity determining region 3 (CDR3) of the light chain variable domain (VL) of this scFv and combined phage display with high throughput antibody array screening to identify variants capable of neutralizing both chemokines. Using this approach it is therefore possible to engineer pan-specific antibodies that could prove very useful to antagonize redundant signaling pathways such as the chemokine signaling network.

Therapeutic antibodies: successes, limitations and hopes for the future

With more than 20 molecules in clinical use, monoclonal antibodies have finally come of age as therapeutics, generating a market value of $11 billion in 2004, expected to reach $26 billion by 2010. While delivering interesting results in the treatment of several major diseases including autoimmune, cardiovascular and infectious diseases, cancer and inflammation, clinical trials and research are generating a wealth of useful information, for instance about associations of clinical responses with Fc receptor polymorphisms and the infiltration and recruitment of effector cells into targeted tissues. Some functional limitations of therapeutic antibodies have come to light such as inadequate pharmacokinetics and tissue accessibility as well as impaired interactions with the immune system, and these deficiencies point to areas where additional research is needed. This review aims at giving an overview of the current state of the art and describes the most promising avenues that are being followed to create the next generation of antibody-based therapeutic agents.

Monoclonal antibodies for cancer immunotherapy

Monoclonal antibodies are effective treatments for many malignant diseases. However, the ability of antibodies to initiate tumour-antigen-specific immune responses has received less attention than have other mechanisms of antibody action. We describe the rationale and evidence for the development of antibodies that can stimulate host tumour-antigen-specific immune responses. Such responses can be induced through the induction of antibody-dependent cellular cytotoxicity, promotion of antibody-targeted cross-presentation of tumour antigens, or by triggering of the idiotypic network. Future treatment modifications or combinations might be able to prolong, amplify, and shape these immune responses to increase the clinical benefits of antibody therapy for human cancer.

Anti-tumor activity of stability-engineered IgG-like bispecific antibodies targeting TRAIL-R2 and LTbetaR

Bispecific antibodies (BsAbs) represent an emerging class of biologics that achieve dual targeting with a single agent. Recombinant DNA technologies have facilitated a variety of creative bispecific designs with many promising therapeutic applications; however, practical methods for producing high quality BsAbs that have good product stability, long serum half-life, straightforward purification, and scalable production have largely been limiting. Here we describe a protein-engineering approach for producing stable, scalable tetravalent IgG-like BsAbs. The stability-engineered IgG-like BsAb was envisioned to target and crosslink two TNF family member receptors, TRAIL-R2 (TNF-Related Apoptosis Inducing Ligand Receptor-2) and LTbetaR (Lymphotoxin-beta Receptor), expressed on the surface of epithelial tumor cells with the goal of triggering an enhanced anti-tumor effect. Our IgG-like BsAbs consists of a stability-engineered anti-LTbetaR single chain Fv (scFv) genetically fused to either the N- or C-terminus of the heavy chain of a fulllength anti-TRAIL-R2 IgG1 monoclonal antibody. Both N- or C-terminal BsAbs were active in inhibiting tumor cell growth in vitro, and with some cell lines demonstrated enhanced activity relative to the combination of parental Abs. Pharmacokinetic studies in mice revealed long serum half-lives for the BsAbs. In murine tumor xenograft models, therapeutic treatment with the BsAbs resulted in reduction in tumor volume either comparable to or greater than the combination of parental antibodies, indicating that simultaneously targeting and cross-linking receptor pairs is an effective strategy for treating tumor cells. These studies support that stability-engineering is an enabling step for producing scalable IgG-like BsAbs with properties desirable for biopharmaceutical development.