Nanoscale adhesion forces between enamel pellicle proteins and hydroxyapatite

The Contribution of Scanning Force Microscopy on Dental Research: A Narrative Review

Scanning force microscopy (SFM) is one of the most widely used techniques in biomaterials research. In addition to imaging the materials of interest, SFM enables the mapping of mechanical properties and biological responses with sub-nanometer resolution and piconewton sensitivity. This review aims to give an overview of using the scanning force microscope (SFM) for investigations on dental materials. In particular, SFM-derived methods such as force-distance curves (scanning force spectroscopy), lateral force spectroscopy, and applications of the FluidFM® will be presented. In addition to the properties of dental materials, this paper reports the development of the pellicle by the interaction of biopolymers such as proteins and polysaccharides, as well as the interaction of bacteria with dental materials.

Acquired enamel pellicle and biofilm engineering with a combination of acid-resistant proteins (CaneCPI-5, StN15, and Hemoglobin) for enhanced protection against dental caries - in vivo and in vitro investigations

OBJECTIVE

This study was designed in two-legs. In the in vivo, we explored the potential of a rinse solution containing a combination (Comb) of 0.1 mg/mL CaneCPI-5 (sugarcane-derive cystatin), 1.88 × 10- 5M StN15 (statherin-derived peptide) and 1.0 mg/mL hemoglobin (Hb) to change the protein profile of the acquired enamel pellicle(AEP) and the microbiome of the enamel biofilm. The in vitro, was designed to reveal the effects of Comb on the viability and bacterial composition of the microcosm biofilm, as well as on enamel demineralization.

MATERIALS AND METHODS

In vivo study, 10 participants rinsed (10mL,1 min) with either deionized water (H2O-control) or Comb. AEP and biofilm were collected after 2 and 3 h, respectively, after rinsing. AEP samples underwent proteomics analysis, while biofilm microbiome was assessed via 16 S-rRNA Next Generation Sequencing(NGS). In vitro study, a microcosm biofilm protocol was employed. Ninety-six enamel specimens were treated with: 1)Phosphate-Buffered Solution-PBS(negative-control), 2)0.12%Chlorhexidine, 3)500ppmNaF and 4)Comb. Resazurin, colony-forming-units(CFU) and Transversal Microradiography(TMR) were performed.

RESULTS

The proteomic results revealed higher quantity of proteins in the Comb compared to control associated with immune system response and oral microbial adhesion. Microbiome showed a significant increase in bacteria linked to a healthy microbiota, in the Comb group. In the in vitro study, Comb group was only efficient in reducing mineral-loss and lesion-depth compared to the PBS.

CONCLUSIONS

The AEP modification altered the subsequent layers, affecting the initial process of bacterial adhesion of pathogenic and commensal bacteria, as well as enamel demineralization.

CLINICAL RELEVANCE

Comb group shows promise in shaping oral health by potentially introducing innovative approaches to prevent enamel demineralization and deter tooth decay.

Erosion-inhibiting and enamel rehardening effects of different types of saliva

OBJECTIVES

The objective of this study was to assess the effects of in situ saliva compared to in vitro human saliva, with or without mucin, on inhibiting erosion and promoting enamel rehardening.

DESIGN

Bovine enamel blocks were randomly distributed into groups (n = 23): Gsitu (human saliva in situ), Gvitro (collected human saliva) and GvitroM (collected human saliva with mucin). The enamel blocks underwent a 2-hour period for the formation of salivary pellicle, based on the assigned groups. Subsequently, they were subjected to three erosive cycles, each of them consisting of an erosive challenge (immersion in 0.65 % citric acid, pH 3.5, 1 min) and saliva exposure (immersion in situ or in vitro saliva for 2 h). Microhardness measurements were performed at each cycle, after each experimental step (erosive challenge and exposure to saliva).

RESULTS

After the first demineralization, in vitro saliva groups presented greater hardness loss, with no statistical difference between GVitroM and GVitro. After the third erosive demineralization the in situ saliva resulted in less hardness loss compared to the first demineralization. In relation to surface hardness recovery, there was no difference among types of saliva but there was a decrease in hardness as the cycles progressed.

CONCLUSION

Saliva groups had different behaviors between the first and third demineralization, being similar after the third cycle in terms of hardness loss. Regarding hardness recovery, all saliva promoted enamel gain, but there was a gradual decrease with the progression of the cycles.

The Yin and Yang of Sodium Lauryl Sulfate Use for Oral and Periodontal Health: A Literature Review

Sodium lauryl sulfate (SLS) is an anionic surfactant, which has a wide range of usage in the health sector and in dental pharmaceutical products, especially in toothpastes. The objective of this review was to investigate the effects of SLS containing dentifrices on oral and periodontal health, possible side effects, and its benefits. A thorough literature search was done using databases of PubMed and Google Scholar and finally, 40 articles were included in the study. This narrative review revealed the sources of discrepancy and conflicting results regarding the impact of SLS on oral cavity as well as a lack of sufficient evidence in most topics. Hence, the evidence suggests improved drug bioavailability when used as a solubilizer, improved plaque control, and reduction in bad breath. On the other hand, SLS can serve as a risk indicator of prolonged oral wound healing time, recurrent aphthous stomatitis.

Caries Management-The Role of Surface Interactions in De- and Remineralization-Processes

BACKGROUND

Bioadhesion and surface interactions on enamel are of essential relevance for initiation, progression and prevention of caries and erosions. Salivary proteins on and within initial carious and erosive lesions can facilitate or aggravate de- and remineralization. This applies for the pellicle layer, the subsurface pellicle and for proteins within initial carious lesions. Little is known about these proteinaceous structures related to initial caries and erosion. Accordingly, there is a considerable demand for an understanding of the underlying processes occurring at the interface between the tooth surface and the oral cavity in order to develop novel agents that limit and modulate caries and erosion. Objectives and findings: The present paper depicts the current knowledge of the processes occurring at the interface of the tooth surface and the oral fluids. Proteinaceous layers on dental hard tissues can prevent or aggravate demineralization processes, whereas proteins within initial erosive or carious lesions might hinder remineralization considerably and restrict the entry of ions into lesions.

CONCLUSIONS

Despite the fact that organic-inorganic surface interactions are of essential relevance for de- and remineralization processes at the tooth surface, there is limited knowledge on these clinically relevant phenomena. Accordingly, intensive research is necessary to develop new approaches in preventive dentistry.

Hydroxyapatite-Based Solution as Adjunct Treatment for Biofilm Management: An In Situ Study

Synthetic hydroxyapatite-based solution is a bioinspired material that may present anti-adhesive properties, restraining the dental biofilm formation without causing adverse effects. This in situ study aims to evaluate the effects of three different hydroxyapatite (HAP) watery solutions as a mouthwash against biofilm adhesion on different dental material surfaces under oral conditions. Hence, four volunteers carried maxillary splints containing enamel, titanium, ceramics, and polymethyl-methacrylate resin (PMMA) samples. Three HAP watery solutions (5%) were prepared with HAP particles presenting different shapes and sizes (HAP I, HAP II, HAP III). During 24 h, the volunteers rinsed two times with one of the following selected tested solution: HAP I, HAP II, HAP III, water, or chlorhexidine 0.2% (CHX). The first rinse was performed 3 min after pellicle formation; the second rinse occurred after a 12 h interval. The surface analysis was performed by scanning electron microscopy (SEM), fluorescence microscopy (FM), and transmission electron microscopy (TEM). Statistical and microscopic analysis showed that most samples treated with any HAP solution revealed reduced biofilm coverage presenting comparable results to CHX treated samples, however without altering the microorganisms' viability. In conclusion, the results of this investigation showed that a pure hydroxyapatite-based mouthrinse could be a promising bioinspired adjunct solution for biofilm management.

Bioinspired caries preventive strategy via customizable pellicles of saliva-derived protein/peptide constructs

Dental caries has been the most widespread chronic disease globally associated with significant health and financial burdens. Caries typically starts in the enamel, which is a unique tissue that cannot be healed or regrown; nonetheless, new preventive approaches have limitations and no effective care has developed yet. Since enamel is a non-renewable tissue, we believe that the intimate overlaying layer, the acquired enamel pellicle (AEP), plays a crucial lifetime protective role and could be employed to control bacterial adhesion and dental plaque succession. Based on our identified AEP whole proteome/peptidome, we investigated the bioinhibitory capacities of the native abundant proteins/peptides adsorbed in pellicle-mimicking conditions. Further, we designed novel hybrid constructs comprising antifouling and antimicrobial functional domains derived from statherin and histatin families, respectively, to attain synergistic preventive effects. Three novel constructs demonstrated significant multifaceted bio-inhibition compared to either the whole saliva and/or its native proteins/peptides via reducing biomass fouling and inducing biofilm dispersion beside triggering bacterial cell death. These data are valuable to bioengineer precision-guided enamel pellicles as an efficient and versatile prevention remedy. In conclusion, integrating complementary acting functional domains of salivary proteins/peptides is a novel translational approach to design multifunctional customizable enamel pellicles for caries prevention.

Anti-Biofouling Coatings on the Tooth Surface and Hydroxyapatite

Dental plaque is one type of biofouling on the tooth surface that consists of a diverse population of microorganisms and extracellular matrix and causes oral diseases and even systematic diseases. Numerous studies have focused on preventing bacteria and proteins on tooth surfaces, especially with anti-biofouling coatings. Anti-biofouling coatings can be stable and sustainable over the long term on the tooth surface in the complex oral environment. In this review, numerous anti-biofouling coatings on the tooth surface and hydroxyapatite (as the main component of dental hard tissue) were summarized based on their mechanisms, which include three major strategies: antiprotein and antibacterial adhesion through chemical modification, contact killing through the modification of antimicrobial agents, and antibacterial agent release. The first strategy of coatings can resist the adsorption of proteins and bacteria. However, these coatings use passive strategies and cannot kill bacteria. The second strategy can interact with the cell membrane of bacteria to cause bacterial death. Due to the possibility of delivering a high antibacterial agent concentration locally, the third strategy is recommended and will be the trend of local drug use in dentistry in the future.

Integrating All-Atom and Coarse-Grained Simulations-Toward Understanding of IDPs at Surfaces

We present a scheme for transferring conformational degrees of freedom from all-atom (AA) simulations of an intrinsically disordered protein (IDP) to coarse-grained (CG) Monte Carlo (MC) simulations using conformational swap moves. AA simulations of a single histatin 5 peptide in water were used to obtain a structural ensemble, which is reweighted in a CGMC simulation in the presence of a negatively charged surface. For efficient sampling, the AA trajectory was condensed using two approaches: RMSD clustering (based on the root-mean-square difference in atom positions) and a "naı̈ve" truncation, where only every 100th frame of the trajectory was included in the library. The results show that even libraries with few structures well reproduce the radius of gyration and interaction free energy as functions of the distance from the surface. We further observe that the surface slightly promotes the secondary structure of histatin 5 and more so if using explicit surface charges rather than smeared charges.

We Do Not Eat Alone: Formation and Maturation of the Oral Microbiota

From the earliest moments of life, contact with the outside world and with other individuals invalidates the sterility of the oral cavity. The oral cavity passes from a sterility condition, that is present only during intrauterine life, to a condition in which a microbiota organizes and evolves itself, accompanying the person throughout their life. Depending on a patient’s age, systemic conditions and/or oral conditions, different characteristics of the oral microbiome are shown. By verifying and analyzing this process it is possible to understand what is at the basis of the etiopathogenesis of some oral pathologies, and also the function of the oral microbiome.

Adhesion of Hydroxyapatite Nanoparticles to Dental Materials under Oral Conditions

Hydroxyapatite nanoparticles (nano-HAP) are receiving considerable attention for dental applications, and their adhesion to enamel is well established. However, there are no reports concerning the effects of HAP on other dental materials, and most of the studies in this field are based on in vitro designs, neglecting the salivary pellicle-apatite interactions. Thus, this in situ pilot study aims to evaluate the effects of three hydroxyapatite-based solutions and their interactions with different dental material surfaces under oral conditions. Hence, two volunteers carried intraoral splints with mounted samples from enamel and from three dental materials: titanium, ceramics, and polymethyl-methacrylate (PMMA). Three HAP watery solutions (5%) were prepared with different shapes and sizes of nano-HAP (HAP I, HAP II, HAP III). After 3 min of pellicle formation, 10 ml rinse was performed during 30 sec. Rinsing with water served as control. Samples were accessed immediately after rinsing, 30 min and 2 h after rinsing. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to characterize the particles, and SEM evaluated the pellicle-HAP interactions. SEM and TEM results showed a high variation in the size range of the particles applied. A heterogeneous HAP layer was present after 2 h on enamel, titanium, ceramics, and PMMA surfaces under oral conditions. Bridge-like structures were visible between the nano-HAP and the pellicle formed on enamel, titanium, and PMMA surfaces. In conclusion, nano-HAP can adhere not only to enamel but also to artificial dental surfaces under oral conditions. The experiment showed that the acquired pellicle act as a bridge between the nano-HAP and the materials' surface.

Comprehensive measurements of salivary pellicle thickness formed at different intraoral sites on Si wafers and bovine enamel

The salivary pellicle is a thin acellular film formed on orally exposed surfaces by adsorption of macromolecules from the oral fluids and serves as a protective layer in the maintenance of oral health. Pellicle thickness measurements are a central tool helping to understand how exogenous manipulations may influence pellicle formation. This is of particular importance for the investigation of new preventive and therapeutic approaches. In the present study we determined the kinetics of the in situ pellicle thickness formation at different intraoral sites and investigated how pellicle formation occurs in different individuals. To address the kinetic aspect, the thickness of the in situ pellicle was determined after formation periods of 3 min, 30 min and 120 min. The thickness of the pellicle was either measured on silicon wafers by ellipsometry or on bovine enamel by transmission electron microscopy. We found a physiologically important rapid pellicle formation phase within the first minutes and a slow pellicle formation phase between 30 min and 120 min. Furthermore, our results identify significant inter-individual differences both for the pellicle thickness and for the formation kinetics, indicating the consideration of individual-specific differences of the pellicle layer as an important aspect for future studies.

Probing the nanoadhesion of Streptococcus sanguinis to titanium implant surfaces by atomic force microscopy

As titanium (Ti) continues to be utilized in great extent for the fabrication of artificial implants, it is important to understand the crucial bacterium–Ti interaction occurring during the initial phases of biofilm formation. By employing a single-cell force spectroscopy technique, the nanoadhesive interactions between the early-colonizing Streptococcus sanguinis and a clinically analogous smooth Ti substrate were explored. Mean adhesion forces between S. sanguinis and Ti were found to be 0.32±0.00, 1.07±0.06, and 4.85±0.56 nN for 0, 1, and 60 seconds contact times, respectively; while adhesion work values were reported at 19.28±2.38, 104.60±7.02, and 1,317.26±197.69 aJ for 0, 1, and 60 seconds, respectively. At 60 seconds surface delays, minor-rupture events were modeled with the worm-like chain model yielding an average contour length of 668±12 nm. The mean force for S. sanguinis minor-detachment events was 1.84±0.64 nN, and Poisson analysis decoupled this value into a short-range force component of −1.60±0.34 nN and a long-range force component of −0.55±0.47 nN. Furthermore, a solution of 2 mg/mL chlorhexidine was found to increase adhesion between the bacterial probe and substrate. Overall, single-cell force spectroscopy of living S. sanguinis cells proved to be a reliable way to characterize early-bacterial adhesion onto machined Ti implant surfaces at the nanoscale.

Differential inflammatory response of dental pulp explants and fibroblasts to saliva

AIM

To investigate the inflammatory response of dental pulp fibroblasts and the respective explants to whole saliva.

METHODOLOGY

Explants from human and porcine dental pulp tissue and isolated dental pulp fibroblasts were used to investigate the inflammatory response to sterile saliva. Cytokine and chemokine expression was assessed by RT-PCR. Western blot analysis and pharmacologic inhibitors were used to determine the involvement of signalling pathways.

RESULTS

Dental pulp explants of human and porcine origin exposed to human saliva exhibited no major changes of IL-6 and IL-8 mRNA expression (P > 0.05). In contrast, isolated porcine and human dental pulp fibroblasts, when stimulated with human saliva, exhibited a vastly increased expression of IL-6 and IL-8 mRNA (P < 0.05). In pulp fibroblasts, saliva also increased the expression of other cytokines and chemokines via activation of NFkappaB, ERK and p38 signalling. Notably, a significantly reduced inflammatory response was elicited when pulp fibroblasts were transiently exposed to saliva.

CONCLUSIONS

Saliva has a potential impact on inflammation of dental pulp fibroblasts in vitro but not when cells are embedded in the intrinsic extracellular matrix of the explant tissue.

Single-bacterium nanomechanics in biomedicine: unravelling the dynamics of bacterial cells

The use of the atomic force microscope (AFM) in microbiology has progressed significantly throughout the years since its first application as a high-resolution imaging instrument. Modern AFM setups are capable of characterizing the nanomechanical behaviour of bacterial cells at both the cellular and molecular levels, where elastic properties and adhesion forces of single bacterium cells can be examined under different experimental conditions. Considering that bacterial and biofilm-mediated infections continue to challenge the biomedical field, it is important to understand the biophysical events leading towards bacterial adhesion and colonization on both biological and non-biological substrates. The purpose of this review is to present the latest findings concerning the field of single-bacterium nanomechanics, and discuss future trends and applications of nanoindentation and single-cell force spectroscopy techniques in biomedicine.