Fibrin sealant adhesive systems: a review of their chemistry, material properties and clinical applications

Biochemical and biomechanical characterization of an autologous protein-based fibrin sealant for regenerative medicine

Accidental events or surgical procedures usually lead to tissue injury. Fibrin sealants have proven to optimize the healing process but have some drawbacks due to their allogeneic nature. Autologous fibrin sealants present several advantages. The aim of this study is to evaluate the performance of a new autologous fibrin sealant based on Endoret®PRGF® technology (E-sealant). One of the most widely used commercial fibrin sealants (Tisseel®) was included as comparative Control. E-sealant´s hematological and biological properties were characterized. The coagulation kinetics and the microstructure were compared. Their rheological profile and biomechanical behavior were also recorded. Finally, the swelling/shrinkage capacity and the enzymatic degradation of adhesives were determined. E-sealant presented a moderate platelet concentration and physiological levels of fibrinogen and thrombin. It clotted 30 s after activation. The microstructure of E-sealant showed a homogeneous fibrillar scaffold with numerous and scattered platelet aggregates. In contrast, Control presented absence of blood cells and amorphous protein deposits. Although in different order of magnitude, both adhesives had similar rheological profiles and viscoelasticity. Control showed a higher hardness but both adhesives presented a pseudoplastic hydrogel nature with a shear thinning behavior. Regarding their adhesiveness, E-sealant presented a higher tensile strength before cohesive failure but their elastic stretching capacity and maximum elongation was similar. While E-sealant presented a significant shrinkage process, Control showed a slight swelling over time. In addition, E-sealant presented a high enzymatic resorption rate, while Control showed to withstand the biodegradation process in a significant way. E-sealant presents optimal biochemical and biomechanical properties suitable for its use as a fibrin sealant with regenerative purposes.

Biological and Adhesive Properties of an Autologous Protein-Based Fibrin Sealant for Ophthalmological Applications

Purpose

The aim of this study was to evaluate the biological and adhesive properties of a new autologous sealant based on plasma rich in growth factors (PRGF), named E-Sealant.

Methods

Conventional PRGF and a commercial fibrin sealant (Tisseel) were included as controls. The hematological and protein content of E-Sealant was determined. Its bioactivity and biocompatibility were tested for human keratocytes (HKs). To evaluate its adhesion and regenerative capacity, E-Sealant was used on an animal model of conjunctival autograft surgery and compared to Tisseel.

Results

E-Sealant presented a high growth factor content with levels similar to those of conventional PRGF. E-Sealant induced proliferative and migratory activity on HK cells equivalent to PRGF. Although autologous membranes induced the proliferation of HKs, cells cultured over Tisseel did not adhere nor proliferate. HK cells showed increased number and flattened morphology over PRGF and E-Sealant compared to scarce and round-shape cells detected in Tisseel. Conjunctival autograft glued with E-Sealant adhered successfully, whereas Tisseel application formed irregular clots. During follow-up, both adhesives showed good integration and no dehiscence. However, Tisseel-treated samples presented slightly increased hemorrhage and inflammation. In contrast to Tisseel, E-Sealant-treated autografts presented a continuous layer of non-keratinized stratified squamous epithelium. Inflammatory infiltrates were minimal in E-Sealant-treated conjunctiva, whereas the Tisseel group showed noticeable immune reactions. Unlike Tisseel-treated grafts, E-Sealant presented low immunoreactivity for smooth muscle actin (SMA), suggesting decreased fibrotic tissue formation.

Conclusions

E-Sealant presents optimal biological and adhesive properties suitable for use as an ophthalmic glue, with regenerative purposes superior to commercial fibrin sealants.

Translational Relevance

Our study analyzed the characterization and biological activity of a new autologous fibrin sealant in ocular surface cells and in an animal model in which the adhesive and regenerative properties of the fibrin sealant were evaluated.

Evaluation of fibrin, cyanoacrylate, and polyurethane-based tissue adhesives in sutureless vascular anastomosis: a comparative mechanical ex vivo study

The stability of a microvascular anastomosis is an important prerequisite for successful tissue transfer. Advances in tissue adhesives are potentially opening new avenues for their use in sutureless microsurgical anastomosis, however they have not yet gained clinical acceptance. In this ex vivo study, a novel polyurethane-based adhesive (PA) was used in sutureless anastomoses and its stability compared with that of sutureless anastomoses performed with fibrin glue (FG) and a cyanoacrylate (CA). Stability was assessed using hydrostatic (15 per group) and mechanical tests (13 per group). A total of 84 chicken femoral arteries were used in this study. The time taken to create the PA and CA anastomoses was significantly faster when compared to the FG anastomoses (P < 0.001): 1.55 ± 0.14 min and 1.39 ± 0.06 min, respectively, compared to 2.03 ± 0.35 min. Both sustained significantly higher pressures (289.3 mmHg and 292.7 mmHg, respectively) than anastomoses using FG (137.3 mmHg) (P < 0.001). CA anastomoses (0.99 N; P < 0.001) and PA anastomoses (0.38 N; P = 0.009) could both withstand significantly higher longitudinal tensile forces compared to FG anastomoses (0.10 N). Considering the background of an in vitro study, the PA and CA anastomosis techniques were shown to be similar to each other and superior to FG, due to their stability and faster handling. These findings need to be validated and confirmed in further in vivo studies.

Biofabrication of engineered dento-alveolar tissue

Oral health is essential for a good overall health. Dento-alveolar conditions have a high prevalence, ranging from tooth decay periodontitis to alveolar bone resorption. However, oral tissues exhibit a limited regenerative capacity, and full recovery is challenging. Therefore, regenerative therapies for dento-alveolar tissue (e.g., alveolar bone, periodontal membrane, dentin-pulp complex) have gained much attention, and novel approaches have been proposed in recent decades. This review focuses on the cells, biomaterials and the biofabrication methods used to develop therapies for tooth root bioengineering. Examples of the techniques covered are the multitude of additive manufacturing techniques and bioprinting approaches used to create scaffolds or tissue constructs. Furthermore, biomaterials and stem cells utilized during biofabrication will also be described for different target tissues. As these new therapies gradually become a reality in the lab, the translation to the clinic is still minute, with a further need to overcome multiple challenges and broaden the clinical application of these alternatives.

Development and optimization of an ocular hydrogel adhesive patch using definitive screening design (DSD)

Adhesive hydrogels based on chemically modified photocrosslinkable polymers with specific physicochemical properties are frequently utilized for sealing wounds or incisions. These adhesive hydrogels offer tunable characteristics such as tailorable tissue adhesion, mechanical properties, swelling ratios, and enzymatic degradability. In this study, we developed and optimized a photocrosslinkable adhesive patch, GelPatch, with high burst pressure, minimal swelling, and specific mechanical properties for application as an ocular (sclera and subconjunctival) tissue adhesive. To achieve this, we formulated a series of hydrogel patches composed of different polymers with various levels of methacrylation, molecular weights, and hydrophobic/hydrophilic properties. A computerized multifactorial definitive screening design (DSD) analysis was performed to identify the most prominent components impacting critical response parameters such as adhesion, swelling ratio, elastic modulus, and second order interactions between applied components. These parameters were mathematically processed to generate a predictive model that identifies the linear and non-linear correlations between these factors. In conclusion, an optimized formulation of GelPatch was selected based on two modified polymers: gelatin methacryloyl (GelMA) and glycidyl methacrylated hyaluronic acid (HAGM). The ex vivo results confirmed adhesion and retention of the optimized hydrogel subconjunctivally and on the sclera for up to 4 days. The developed formulation has potential to be used as an ocular sealant for quick repair of laceration type ocular injuries.

Application of fibrin glue for hematoma prophylaxis in selective aponeurectomy in Dupuytren's disease

INTRODUCTION

Fibrin glue (FG) can be applied in several surgical procedures at wound closure to reduce postoperative complications such as hematoma formation and wound impairment. The purpose of this study is to assess these preventive surgical benefits in Dupuytren's disease of the hand.

PATIENTS AND METHODS

We performed a monocentric retrospective cohort study. All patients who underwent selective aponeurectomy for Dupuytren's disease between 2010 and 2020 were included. Patients were divided into two groups: either receiving or not receiving FG. The primary outcome variables were postoperative bleeding, wound healing impairment, and further pooled postoperative complications.

RESULTS

One hundred and thirty-three patients were included in the analysis of which 108 patients were treated with FG, while 24 did not. There was no statistically significant difference in outcomes regarding postoperative bleeding, infections, or revision surgery. However, in the group receiving FG, there was a tendency toward higher wound healing impairment (13%, p = 0.07). The FG group showed a significantly higher pooled complication rate (18.5%, p < 0.02). Complication in general increased with higher Tubiana classification and number of resected cords. Smoking tripled the risk of impaired wound, while cardiovascular comorbidities increased postoperative bleeding by the factor of 11.

CONCLUSION

FG did not show a preventive outcome regarding bleeding. The FG group had a tendency for a higher wound healing incidence. Smoking and arterial hypertension correlated with a higher postoperative complication rate. The overall incidence of complications was higher in the FG group. The quality of the surgical intervention as well as accurate hemostasis cannot be corrected by the application of FG.

Spray Film-Forming systems as promising topical in situ Systems: A review

Spray film-forming systems (SFFSs) provide great potential for the treatment of various types of wounds. Such systems afford to prolong the action of active substances, to prevent cross-contamination, and to ensure accelerated wound healing. Spray films are known since the mid-20th century, and nowadays they are widely used to treat minor skin injuries, but numerous clinical cases describe their successful use in the treatment of burns, wounds, bedsores, etc. The current level of polymer development and composite synthesis has greatly expanded the possibilities of creating compositions of spray film-forming systems. Scattered information and lack of standardization of such delivery systems creates difficulties for pharmaceutical development. This review highlights most of the existing requirements and suggestions from studies to standardize the characteristics of SFFSs and classify them based on scientific sources and regulatory documentation, as well as the position of such systems in the pharmaceutical market. The search and evaluation of known characterization methods and their modifications, as well as the approval of their list (separately for development and for standardization) can potentially increase the research interest in the problem of spray film-forming systems development and contribute to the registration of new drugs and medical devices in this promising dosage form, including with its own pharmacological effect.

Bio-inspired conductive adhesive based on calcium-free alginate hydrogels for bioelectronic interfaces

Electrode impedance is one of the greatest challenges facing neural interfacing medical devices and the use of electrical stimulation-based therapies in the fields of neurology and regenerative medicine. Maximizing contact between electronics and tissue would allow for more accurate recordings of neural activity and to stimulate with less power in implantable devices as electric signals could be more precisely transferred by a stable interfacial area. Neural environments, inherently wet and ion-rich, present a unique challenge for traditional conductive adhesives. As such, we look to marine mussels that use a 3,4-dihydroxyphenyl-L-analine (DOPA)-containing proteinaceous excretion to adhere to a variety of substrates for inspiration. By functionalizing alginate, which is an abundantly available natural polymer, with the catechol residues DOPA contains, we developed a hydrogel-based matrix to which carbon-based nanofiller was added to render it conductive. The synthesized product had adhesive energy within the range of previously reported mussel-based polymers, good electrical properties and was not cytotoxic to brain derived neural precursor cells.

Advanced bioengineering of female germ cells to preserve fertility

Oogenesis and folliculogenesis are considered as complex and species-specific cellular differentiation processes, which depend on the in vivo ovarian follicular environment and endocrine cues. Considerable efforts have been devoted to driving the differentiation of female primordial germ cells toward mature oocytes outside of the body. The recent experimental attempts have laid stress on offering a suitable microenvironment to assist the in vitro folliculogenesis and oogenesis. Despite developing a variety of bioengineering techniques and generating functional mature gametes through in vitro oogenesis in earlier studies, we still lack knowledge of appropriate microenvironment conditions for building biomimetic culture systems for female fertility preservation. Therefore, this review paper can provide a source for a large body of scientists developing cutting-edge in vitro culture systems for female germ cells or setting up the next generation of reproductive medicine as feasible options for female infertility treatment. The focal point of this review outlines advanced bioengineering technologies such as 3D biofabricated hydrogels/scaffolds and microfluidic systems utilized with female germlines for fertility preservation through in vitro folliculogenesis and oogenesis.

Injectable Click Fibroin Bioadhesive Derived from Spider Silk for Accelerating Wound Closure and Healing Bone Fracture

Wound closure is a critical step in postoperative wound recovery. Substantial advancements have been made in many different means of facilitating wound closure, including the use of tissue adhesives. Compared to conventional methods, such as suturing, tissue bioadhesives better accelerate wound closure. However, several existing tissue adhesives suffer from cytotoxicity, inadequate tissue adhesive strength, and high costs. In this study, a series of bioadhesives was produced using non-swellable spider silk-derived silk fibroin protein and an outer layer of swellable polyethylene glycol and tannic acid. The gelation time of the spider silk-derived silk fibroin protein bioadhesive is less than three minutes and thus can be used during rapid surgical wound closure. By adding polyethylene glycol (PEG) 2000 and tannic acid as co-crosslinking agents to the N-Hydroxysuccinimide (NHS), and 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) reaction, the adhesive strength of the bioadhesive became 2.5 times greater than that of conventional fibrin glue adhesives. Silk fibroin bioadhesives do not show significant cytotoxicity in vitro compared with other bioadhesives. In conclusion, silk fibroin bioadhesive is promising as a new medical tool for more effective and efficient surgical wound closure, particularly in bone fractures.

Adhesive anastomosis for organ transplantation

The recent development of tough tissue adhesives has stimulated intense interests among material scientists and medical doctors. However, these adhesives have seldom been tested in clinically demanding surgeries. Here we demonstrate adhesive anastomosis in organ transplantation. Anastomosis is commonly conducted by dense sutures and takes a long time, during which all the vessels are occluded. Prolonged occlusion may damage organs and even cause death. We formulate a tough, biocompatible, bioabsorbable adhesive that can sustain tissue tension and pressurized flow. We expose the endothelial surface of vessels onto a gasket, press two endothelial surfaces to the adhesive using a pair of magnetic rings, and reopen the bloodstream immediately. The time for adhesive anastomosis is shortened compared to the time for sutured anastomosis. We have achieved adhesive anastomosis of a great vein in transplanting the liver of a pig. After the surgery, the adhesive is absorbed, the vein heals, and the pig lives for over one month.

Infant Skin Friendly Adhesive Hydrogel Patch Activated at Body Temperature for Bioelectronics Securing and Diabetic Wound Healing

Adhesive-caused injury is a great threat for infants with premature skin or diabetic patients with fragile skin because extra-strong adhesion might incur pain, inflammation, and exacerbate trauma upon removal. Herein, we present a skin-friendly adhesive hydrogel patch based on protein-polyphenol complexation strategy, which leads to a thermoresponsive network sensitive to body temperature. The adhesion of the hydrogel is smartly activated after contacting with warm skin, whereas the painless detachment is easily realized by placing an ice bag on the surface of the hydrogel. The hydrogel exhibits an immunomodulatory performance that prevents irritation and allergic reactions during long-period contact with the skin. Thus, the hydrogel patch works as a conformable and nonirritating interface to guarantee nondestructively securing bioelectronics on infant skin for healthcare. Furthermore, the hydrogel patch provides gentle adhesion to wounded skin and provides a favorable environment to speed up the healing process for managing diabetic wounds.

Polymerizable Skin Hydrogel for Full Thickness Wound Healing

The skin is the largest organ in the human body, comprising the main barrier against the environment. When the skin loses its integrity, it is critical to replace it to prevent water loss and the proliferation of opportunistic infections. For more than 40 years, tissue-engineered skin grafts have been based on the in vitro culture of keratinocytes over different scaffolds, requiring between 3 to 4 weeks of tissue culture before being used clinically. In this study, we describe the development of a polymerizable skin hydrogel consisting of keratinocytes and fibroblast entrapped within a fibrin scaffold. We histologically characterized the construct and evaluated its use on an in vivo wound healing model of skin damage. Our results indicate that the proposed methodology can be used to effectively regenerate skin wounds, avoiding the secondary in vitro culture steps and thus, shortening the time needed until transplantation in comparison with other bilayer skin models. This is achievable due to the instant polymerization of the keratinocytes and fibroblast combination that allows a direct application on the wound. We suggest that the polymerizable skin hydrogel is an inexpensive, easy and rapid treatment that could be transferred into clinical practice in order to improve the treatment of skin wounds.

Current Concepts on Tissue Adhesive Use for Meniscal Repair-We Are Not There Yet: A Systematic Review of the Literature

BACKGROUND

Tissue adhesives (TAs) represent a promising alternative or augmentation method to conventional tissue repair techniques. In sports medicine, TA use has been suggested and implemented in the treatment of meniscal tears. The aim of this review was to present and discuss the current evidence and base of knowledge regarding the clinical usage of TAs for meniscal repair.

STUDY DESIGN

Systematic review; Level of evidence, 4.

METHODS

A systematic literature search was performed using the PubMed, Embase, and Cochrane Library databases for studies reporting on clinical outcomes of TA usage for meniscal repair in humans in the English language published before January 2020.

RESULTS

Ten studies were eligible for review and included 352 meniscal repairs: 94 (27%) were TA-based repairs and 258 (73%) were combined suture and TA repairs. Concomitant anterior cruciate ligament reconstruction was performed in 224 repairs (64%). All included studies utilized fibrin-based TA. Of the 10 studies, 9 were evidence level 4 (case series), and 8 reported on a cohort of ≤40 meniscal repairs. Rates of meniscal healing were evaluated in 9 of 10 studies, with repair failure seen in 39 repairs (11%).

CONCLUSION

The use of TAs, specifically fibrin-based TAs, for meniscal repair shows good results as either an augmentation or primary repair of various configurations of meniscal tears. However, this review reveals an absence of comparative high-quality evidence supporting the routine use of TAs for meniscal repair and emphasizes the lack of an ideal TA designed for that purpose. Further high-quality research, basic science and clinical, will facilitate the development of new materials and enable testing their suitability for use in meniscal repair.

Fibrin sealant versus sutures in periodontal surgery: A systematic review

Background

The aim of this systematic review was to assess the effectiveness of fibrin sealant compared to sutures in periodontal surgery.

Methods

Five electronic databases (PubMed, Scopus, EBSCO, Cochrane and Web of Science) were screened from initiation to January 2021 for randomized controlled trials (RCTs) comparing fibrin sealant to sutures in periodontal surgery using this search equation: (Periodont* OR Periodontitis) AND ("fibrin tissue adhesive" OR "fibrin glue" OR "fibrin sealant" OR "fibrin sealant system" OR "fibrin adhesive system" OR "fibrin fibronectin sealant system"). Quality assessment of the included studies was performed using the revised tool to assess risk of bias in randomized trials (RoB 2). The level of evidence was evaluated using the GRADE tool.

Results

A total of 240 publications were found as search results in the screened databases. Four RCTs were included in this systematic review based on predetermined inclusion criteria. The trials were published between 1987 and 2014. All the RCTs compared fibrin sealant to sutures in periodontal surgery. The sample size included 101 patients. The overall risk of bias in this systematic review was at high risk in 75% of the studies, while 25% of the studies raised some concerns. The level of evidence evaluated using GRADE tool was very low.

Discussion

The current systematic review indicates a low level of evidence of the use of fibrin sealant as an alternative to sutures in periodontal practice. More interventional and multicentric studies should be conducted to support and confirm the results of the included studies.

A novel autologous dermal filler based on cultured fibroblasts and plasma gel for facial wrinkles: Long term results

Autologous cultured fibroblasts combined with plasma gel (Fibrogel^TM) can be used as an injectable autologous soft tissue filler. Herein, we report the assessment of the long-term clinical efficacy and safety of Fibrogel for facial wrinkles. Ten healthy adults were treated for facial wrinkles with Fibrogel, an innovative autologous filler. Patients underwent three treatment sessions at 1-month intervals for the correction of infraorbital, nasolabial, and marionette folds. In each session, 6-8 mL of Fibrogel filler containing 4 million fibroblasts/mL, was injected into the deep dermis or subdermal plane. Three evaluators independently assessed the efficacy at 3, 6 and 12 months after the last treatment, using the validated Global Esthetic Improvement Scale at two different times in a blinded manner. Infraorbital area and lower face were evaluated separately. All patients showed immediate improvement after the first injection at the infraorbital area and lower face. Follow-ups at 3, 6 and 12 months revealed that the improvement was persistent. Adverse reactions were mild and the treatment was well tolerated. Delivering autologous cultured fibroblasts embedded in an autologous plasma gel (Fibrogel) to the skin can provide immediate volume effect and long-term improvement. Therefore, Fibrogel can be considered as a promising novel autologous filler.

Engineering a naturally derived hemostatic sealant for sealing internal organs

Controlling bleeding from a raptured tissue, especially during the surgeries, is essentially important. Particularly for soft and dynamic internal organs where use of sutures, staples, or wires is limited, treatments with hemostatic adhesives have proven to be beneficial. However, major drawbacks with clinically used hemostats include lack of adhesion to wet tissue and poor mechanics. In view of these, herein, we engineered a double-crosslinked sealant which showed excellent hemostasis (comparable to existing commercial hemostat) without compromising its wet tissue adhesion. Mechanistically, the engineered hydrogel controlled the bleeding through its wound-sealing capability and inherent chemical activity. This mussel-inspired hemostatic adhesive hydrogel, named gelatin methacryloyl-catechol (GelMAC), contained covalently functionalized catechol and methacrylate moieties and showed excellent biocompatibility both in vitro and in vivo. Hemostatic property of GelMAC hydrogel was initially demonstrated with an in vitro blood clotting assay, which showed significantly reduced clotting time compared to the clinically used hemostat, Surgicel®. This was further assessed with an in vivo liver bleeding test in rats where GelMAC hydrogel closed the incision rapidly and initiated blood coagulation even faster than Surgicel®. The engineered GelMAC hydrogel-based seaalant with excellent hemostatic property and tissue adhesion can be utilized for controlling bleeding and sealing of soft internal organs.

Zastosowanie fibryny w inżynierii tkankowej. Osiągnięcia i perspektywy

W ostatnich latach istotnym obszarem zastosowania fibryny stała się inżynieria tkankowa, w której wykorzystuje się naturalne właściwości biostatyczne i bioaktywne fibryny, a także możliwość pułapkowania i wiązania w jej strukturze czynników wzrostu. Fibryna jest najczęściej stosowana w postaci żeli i dysków. Jednak każda postać wskutek pochłaniania wody docelowo przyjmuje postać żelu. Białko to w warunkach in vivo spełnia rolę rusztowania dla komórek, a także może być aplikowane w miejsca trudno dostępne – może wypełniać ubytki tkanek i podtrzymywać tkanki okalające, zapobiegając ich zapadaniu się. Ponadto fibryna hamuje krwawienie i inicjuje proces odnowy, jak również pełni rolę stymulatora wzrostu komórek. Przez modyfikacje struktury fibryny cząsteczkami adhezyjnymi, można przyspieszyć odbudowę prawidłowej struktury tkanek. Jej właściwości strukturalne mogą być także wykorzystywane jako rezerwuar czynników wzrostu i system ich przedłużonego uwalniania. Fibryna jest materiałem biodegradowalnym, umożliwiając skorelowanie ubytku matrycy fibrynowej z odbudową tkanek własnych pacjenta. Wprowadzenie metod druku 3D i elektroprzędzenia umożliwia formulację dopasowanych do uszkodzeń kształtek oraz włóknin bez utraty bioaktywnych funkcji fibryny. Metody te umożliwiają także poprawę właściwości mechanicznych przez otrzymywanie m.in. włóknin fibryny z innymi polimerami, co jest szczególnie uzasadnione w przypadku materiałów stosowanych w odbudowie takich struktur jak ścięgna czy kości. Biotechnologiczna synteza fibrynogenu może w przyszłości uniezależnić pozyskiwanie go z krwi i zwiększyć popularność wyrobów medycznych otrzymywanych z fibryny.

Skin-like hydrogel devices for wearable sensing, soft robotics and beyond

Skin-like electronics are developing rapidly to realize a variety of applications such as wearable sensing and soft robotics. Hydrogels, as soft biomaterials, have been studied intensively for skin-like electronic utilities due to their unique features such as softness, wetness, biocompatibility and ionic sensing capability. These features could potentially blur the gap between soft biological systems and hard artificial machines. However, the development of skin-like hydrogel devices is still in its infancy and faces challenges including limited functionality, low ambient stability, poor surface adhesion, and relatively high power consumption (as ionic sensors). This review aims to summarize current development of skin-inspired hydrogel devices to address these challenges. We first conduct an overview of hydrogels and existing strategies to increase their toughness and conductivity. Next, we describe current approaches to leverage hydrogel devices with advanced merits including anti-dehydration, anti-freezing, and adhesion. Thereafter, we highlight state-of-the-art skin-like hydrogel devices for applications including wearable electronics, soft robotics, and energy harvesting. Finally, we conclude and outline the future trends.

Stretchable, Bio-Compatible, Antioxidant and Self-Powering Adhesives from Soluble Silk Fibroin and Vegetal Polyphenols Exfoliated Graphite

The development of bio-glues is still a challenging task, regarding adhesion on wet surfaces; often, high performance and adaption to complex geometries need to be combined in one material. Here, we report biocompatible adhesives obtained by blending regenerated silk (RS) with a soluble plant-derived polyphenol (i.e., chestnut tannin) that was also used to exfoliate graphite to obtain graphene-based RS/tannin (G-RS/T) composites. The resultant G-RS/T hybrid material exhibited outstanding stretchability (i.e., 400%) and high shear strength (i.e., 180 kPa), superior to that of commercial bio-glues, and showed sealant properties for tissue approximation. Moreover, we showed how such nanocomposites exhibit electromechanical properties that could potentially be used for the realization of green and eco-friendly piezoelectric devices. Finally, we demonstrate the in vitro glue’s biocompatibility and anti-oxidant properties that enable their utilization in clinical applications.

Rational engineering and applications of functional bioadhesives in biomedical engineering

For the past decades, several bioadhesives have been developed to replace conventional wound closure medical tools such as sutures, staples, and clips. The bioadhesives are easy to use and can minimize tissue damage. They are designed to provide strong adhesion with stable mechanical support on tissue surfaces. However, this monofunctionality of the bioadhesives hinders their practical applications. In particular, a bioadhesive can lose its intended function under harsh tissue environments or delay tissue regeneration during wound healing. Based on several natural and synthetic biomaterials, functional bioadhesives have been developed to overcome the aforementioned limitations. The functional bioadhesives are designed to have specific characteristics such as antimicrobial, cell infiltrative, stimuli-responsive, electrically conductive, and self-healing to ensure stability under harsh tissue conditions, facilitate tissue regeneration, and effectively monitor biosignals. Herein, we thoroughly review the functional bioadhesives from their fundamental background to recent progress with their practical applications for the enhancement of tissue healing and effective biosignal sensing. Furthermore, the future perspectives on the applications of functional bioadhesives and current challenges in their commercialization are also discussed.

Large anastomotic leak: endoscopic treatment using combined fibrin glue and polyglycolic acid (PGA) sheets

Anastomotic leak after gastrectomy is a major complication and various endoscopic methods have been suggested. However, the treatment of large-sized leaks remains a challenge. Here, we present a case of a large anastomotic leak successfully treated endoscopically using a combination of fibrin glue and polyglycolic acid (PGA) sheets. A 68-year-old man who underwent laparoscopic total gastrectomy and oesophagojejunal anastomosis presented with abdominal pain and fever. In the endoscopic examination, two fistulas were observed at the anastomosis site. One was small (0.6 cm) while the other measured 2.5 cm. For the large leak, endoscopic treatment using endoclip and detachable snare was attempted, but failed. Subsequently, fibrin glue was injected into the large fistula through an endoscope. After 28 days, the size of the fistula was reduced and PGA sheets were inserted into the remaining fistula. After about 4 weeks, leaks were observed to be completely healed.

Multifaceted Design and Emerging Applications of Tissue Adhesives

Tissue adhesives can form appreciable adhesion with tissues and have found clinical use in a variety of medical settings such as wound closure, surgical sealants, regenerative medicine, and device attachment. The advantages of tissue adhesives include ease of implementation, rapid application, mitigation of tissue damage, and compatibility with minimally invasive procedures. The field of tissue adhesives is rapidly evolving, leading to tissue adhesives with superior mechanical properties and advanced functionality. Such adhesives enable new applications ranging from mobile health to cancer treatment. To provide guidelines for the rational design of tissue adhesives, here, existing strategies for tissue adhesives are synthesized into a multifaceted design, which comprises three design elements: the tissue, the adhesive surface, and the adhesive matrix. The mechanical, chemical, and biological considerations associated with each design element are reviewed. Throughout the report, the limitations of existing tissue adhesives and immediate opportunities for improvement are discussed. The recent progress of tissue adhesives in topical and implantable applications is highlighted, and then future directions toward next-generation tissue adhesives are outlined. The development of tissue adhesives will fuse disciplines and make broad impacts in engineering and medicine.

Robust Hydrogel Adhesive with Dual Hydrogen Bond Networks

Hydrogel adhesives are attractive for applications in intelligent soft materials and tissue engineering, but conventional hydrogels usually have poor adhesion. In this study, we designed a strategy to synthesize a novel adhesive with a thin hydrogel adhesive layer integrated on a tough substrate hydrogel. The adhesive layer with positive charges of ammonium groups on the polymer backbones strongly bonds to a wide range of nonporous materials’ surfaces. The substrate layer with a dual hydrogen bond system consists of (i) weak hydrogen bonds between N,N-dimethyl acrylamide (DMAA) and acrylic acid (AAc) units and (ii) strong multiple hydrogen bonds between 2-ureido-4[1H]-pyrimidinone (UPy) units. The dual hydrogen-bond network endowed the hydrogel adhesives with unique mechanical properties, e.g., toughness, highly stretchability, and insensitivity to notches. The hydrogel adhesion to four types of materials like glass, 316L stainless steel, aluminum, Al₂O₃ ceramic, and two biological tissues including pig skin and pig kidney was investigated. The hydrogel bonds strongly to dry solid surfaces and wet tissue, which is promising for biomedical applications.

Radiation-Induced Recurrent Vesicovaginal Fistula-Treatment with Adjuvant Platelet-Rich Plasma Injection and Martius Flap Placement-Case Report and Review of Literature

Vesicovaginal fistula is the non-physiological connection between the urinary bladder and vagina. This results in continuous urine leakage. In developed countries, the prevalence of this condition is low and affects (mainly) women with a history of gynaecological procedures or radiotherapy. The aim of this study was to present the therapeutic process of a patient with radiation-induced, recurrent vesicovaginal fistula. The thirty-eight-year-old patient underwent radical hysterectomy with follow-up radiotherapy due to cervical cancer. Five years after the therapy, she was diagnosed with vesicovaginal fistula. After two unsuccessful Latzko procedures and two adjuvant platelet-rich plasma injections, a third Latzko reconstructive surgery was performed with additional transposition of the Martius flap—with successful closure of the fistula.

Engineering Hydrogel Adhesion for Biomedical Applications via Chemical Design of the Junction

Hydrogel adhesion inherently relies on engineering the contact surface at soft and hydrated interfaces. Upon contact, adhesion normally occurs through the formation of chemical or physical interactions between the disparate surfaces. The ability to form these adhesion junctions is challenging for hydrogels as the interfaces are wet and deformable and often contain low densities of functional groups. In this Review, we link the design of the binding chemistries or adhesion junctions, whether covalent, dynamic covalent, supramolecular, or physical, to the emergent adhesive properties of soft and hydrated interfaces. Wet adhesion is useful for bonding to or between tissues and implants for a range of biomedical applications. We highlight several recent and emerging adhesive hydrogels for use in biomedicine in the context of efficient junction design. The main focus is on engineering hydrogel adhesion through molecular design of the junctions to tailor the adhesion strength, reversibility, stability, and response to environmental stimuli.

Chlorite oxidized oxyamylose differentially influences the microstructure of fibrin and self assembling peptide hydrogels as well as dental pulp stem cell behavior

Tailored hydrogels mimicking the native extracellular environment could help overcome the high variability in outcomes within regenerative endodontics. This study aimed to evaluate the effect of the chemokine-binding and antimicrobial polymer, chlorite-oxidized oxyamylose (COAM), on the microstructural properties of fibrin and self-assembling peptide (SAP) hydrogels. A further goal was to assess the influence of the microstructural differences between the hydrogels on the in vitro behavior of human dental pulp stem cells (hDPSCs). Structural and mechanical characterization of the hydrogels with and without COAM was performed by atomic force microscopy and scanning electron microscopy to characterize their microstructure (roughness and fiber length, diameter, straightness, and alignment) and by nanoindentation to measure their stiffness (elastic modulus). Then, hDPSCs were encapsulated in hydrogels with and without COAM. Cell viability and circularity were determined using confocal microscopy, and proliferation was determined using DNA quantification. Inclusion of COAM did not alter the microstructure of the fibrin hydrogels at the fiber level while affecting the SAP hydrogel microstructure (homogeneity), leading to fiber aggregation. The stiffness of the SAP hydrogels was sevenfold higher than the fibrin hydrogels. The viability and attachment of hDPSCs were significantly higher in fibrin hydrogels than in SAP hydrogels. The DNA content was significantly affected by the hydrogel type and the presence of COAM. The microstructural stability after COAM inclusion and the favorable hDPSCs' response observed in fibrin hydrogels suggest this system as a promising carrier for COAM and application in endodontic regeneration.

Fibrinogen Replacement Therapy for Traumatic Coagulopathy: Does the Fibrinogen Source Matter?

Fibrinogen is the first coagulation protein to reach critically low levels during traumatic haemorrhage. There have been no differential effects on clinical outcomes between the two main sources of fibrinogen replacement: cryoprecipitate and fibrinogen concentrate (Fg-C). However, the constituents of these sources are very different. The aim of this study was to determine whether these give rise to any differences in clot stability that may occur during trauma haemorrhage. Fibrinogen deficient plasma (FDP) was spiked with fibrinogen from cryoprecipitate or Fg-C. A panel of coagulation factors, rotational thromboelastography (ROTEM), thrombin generation (TG), clot lysis and confocal microscopy were performed to measure clot strength and stability. Increasing concentrations of fibrinogen from Fg-C or cryoprecipitate added to FDP strongly correlated with Clauss fibrinogen, demonstrating good recovery of fibrinogen (r² = 0.99). A marked increase in Factor VIII, XIII and α₂-antiplasmin was observed in cryoprecipitate (p < 0.05). Increasing concentrations of fibrinogen from both sources were strongly correlated with ROTEM parameters (r² = 0.78-0.98). Cryoprecipitate therapy improved TG potential, increased fibrinolytic resistance and formed more homogeneous fibrin clots, compared to Fg-C. In summary, our data indicate that cryoprecipitate may be a superior source of fibrinogen to successfully control bleeding in trauma coagulopathy. However, these different products require evaluation in a clinical setting.

Clean version: Electrospun fibrinogen scaffolds from discarded blood for wound healing

Immediate reutilization of discarded blood from surgery has not received much attention, leading to the waste of a large amount of autologous blood. We used a concentration gradient and high-voltage electrospinning technology to immediately prepare a scaffold material with high biological activity but without immunogenicity from autologous waste blood collected during surgery. Here, we fabricated and characterized a 90 mg/mL group, 110 mg/mL group, and 130 mg/mL group of fibrinogen (FBG) scaffolds. Analyses revealed that the FBG scaffolds had good film-forming properties and a clear fiber structure. in vitro cell viability experiments confirmed that the cells showed an increasing trend with increasing FBG concentrations. The cells grew well in the scaffold material and secreted more cell matrix. When human bone mesenchymal stem cells (hBMSCs) were cocultured with the scaffold material, the hBMSCs expressed osteogenic and chondrogenic biomarkers. The cellular scaffold complexes from the 3 groups were implanted in four full-thickness round wounds (Φ12 mm) on the dorsal back of each rat, the 130 mg/mL group showed a 90% reduction in wound size and the data compared to other groups were better at 14 day. These results suggest that electrospinning technology-based FBG scaffold materials derived from autologous waste blood may become an ideal tissue engineering scaffold and can be immediately used for autologous hemostasis, anti-adhesion films, and wound dressing in surgery.

A review of the properties and applications of bioadhesive hydrogels

Due to their outstanding properties, bioadhesive hydrogels have been extensively studied by researchers in recent years.

Randomized Clinical Trial Comparing Three Local Hemostatic Agents for Dental Extractions in Patients under Chronic Anticoagulant Therapy - A Comparative Study

Introduction

Oral anticoagulants are widely used worldwide for many systemic diseases. Recent oral surgical protocols suggest that therapeutic levels of the anticoagulant drug should be maintained for simple dental extractions because bleeding complications could be managed with proper local hemostasis. The aim of the present study was to compare bleeding complication of three different local hemostatic agents for dental extractions without interrupting drug administration in patients undergoing oral Vitamin K antagonist chronic anticoagulant therapy.

Material and Methods

Randomized control trial of three hemostatic agents for dental extractions, in patients under oral anticoagulant therapy without drug interruption. The present study included 240 patients with international normalized ratio between 1.5 and 3.5. Patients took their anticoagulation drug normally. A single surgeon performed calibrated simple dental extractions and applied a plug of bismuth subgallate (BS), fibrin tissue adhesive (FTA) or microfibrillar collagen (MC), assigned randomly. Statistical analysis of bleeding between the groups was performed using the Chi-square test.

Results

There was no hemorrhagic complication in the BS group, and only one in the FTA group. However, in the MC group, 10 patients (12.5%) suffered postoperative bleeding. Data analysis showed statistical differences between the MC group and the other two groups (P < 0.05).

Discussion

BS and FTA showed similar clinical effectiveness and were more effective than MC for the control of postoperative bleeding in oral anticoagulated patients.

Modified hyaluronic acid hydrogels with chemical groups that facilitate adhesion to host tissues enhance cartilage regeneration

Stable integration of hydrogel implants with host tissues is of critical importance to cartilage tissue engineering. Designing and fabricating hydrogels with high adhesive strength, stability and regeneration potential are major challenges to be overcome. This study fabricated injectable adhesive hyaluronic acid (HA) hydrogel modified by aldehyde groups and methacrylate (AHAMA) on the polysaccharide backbone with multiple anchoring mechanisms (amide bond through the dynamic Schiff base reaction, hydrogen bond and physical interpenetration). AHAMA hydrogel exhibited significantly improved durability and stability within a humid environment (at least 7 days), together with higher adhesive strength (43 KPa to skin and 52 KPa to glass), as compared to commercial fibrin glue (nearly 10 KPa) and HAMA hydrogel (nearly 20 KPa). The results showed that AHAMA hydrogel was biocompatible and could be easily and rapidly prepared in situ. In vitro cell culture experiments showed that AHAMA hydrogel could enhance proliferation (1.2-folds after 3 days) and migration (1.5-folds after 12 h) of bone marrow stem cells (BMSCs), as compared to cells cultured in a culture dish. Furthermore, in a rat osteochondral defect model, implanted AHAMA hydrogel significantly promoted integration between neo-cartilage and host tissues, and significantly improved cartilage regeneration (modified O'Driscoll histological scores of 16.0 ± 4.1 and 18.3 ± 4.6 after 4 and 12-weeks of post-implantation in AHAMA groups respectively, 12.0 ± 2.7 and 12.2 ± 2.8 respectively in HAMA groups, 9.8 ± 2.4 and 11.5 ± 2.1 respectively in untreated groups). Hence, AHAMA hydrogel is a promising adhesive biomaterial for clinical cartilage regeneration and other biomedical applications.

•

Adhesive hydrogel composed of single natural polymer component.

•

The single component enhance stable and easy to use in surgical operation of hydrogel.

•

Adhesive hydrogel exhibited strong adhesive strength through multiple anchoring mechanisms.

•

Adhesive hydrogel promoted integration between neo-cartilage and host tissues, drastically improved cartilage regeneration.

Photosensitizer delivery by fibrin glue: potential for bypassing the blood-brain barrier

Fibrin glue (FG) has potential as a delivery vehicle for photosensitizer directly to the resection cavity, so it may bypass the blood-brain barrier (BBB) and increase the concentration of successfully delivered photosensitizer. A specialized form of photodynamic therapy (PDT), photochemical internalization (PCI), which involves both photosensitizer and chemotherapeutic agent internalization, can locally inhibit the growth of cells. This will allow the reduction of recurrence of malignant gliomas around surgical resection. This study will look at the efficacy of FG loaded with drugs in mediating both PDT and PCI in inhibiting 3-dimensional tumor spheroid growth in vitro. Experiments were conducted on spheroids comprised of F98 glioma cells using photosensitizer AlPcS_2a and chemotherapeutic drug bleomycin (BLM). At 2-, 24-, 48-, and 72-h increments, supernatant covering an FG layer within a well was collected and replaced by fresh medium, then added to spheroid-containing wells, which contained the respective chemicals for PDT and PCI. The wells were then exposed to light treatment from a diode laser, and after, spheroid growth was monitored for a period of 14 days. Significant spheroid growth inhibition was observed in both PDT and PCI modalities, but was far greater in PCI. Additionally, complete growth suppression was achieved via PCI at the highest radiant exposure. Achieving a slow photosensitizer release, significant F98 spheroid inhibition was observed in FG-mediated PDT and PCI. The present study showed BLM-PCI was the most efficacious of the two modalities.

Shear-Induced Adhesion of Alternating Peptides Prepared by Ugi Four-Center Three-Component Reaction

The development of new peptide-based glues has been strongly urged from the viewpoints of industrial applications and biomedical engineering. However, the large-scale synthesis of polypeptides with an ordered sequence is highly challenging, which strictly restricts materials resources for the research and development of polypeptides. In this work, the framework of adhesive alternating peptides has been designed to be glycine (Gly)-N-substituted valine (Val) as the dipeptide repeating sequence, considering the peptapeptide repeating sequence of viscoelastic natural elastin as a motif. The alternating peptides are prepared via three-component polymerization exploiting Ugi four-center three-component reaction as the elemental polymerization reaction. The adhesive strength (S_Adh ) values of the polymers are evaluated by a shear adhesive test method using two glass plates. Alternating peptides with Gly-N-benzylated Val dipeptide repeating units exhibit the optimal adhesive properties such as much higher S_Adh than that of conventional fibrin glue and a unique readhesion capability. It is indicated that the remarkably high S_Adh would be attributed to the shear-induced structural change of single polymer chain, the slow relaxation of extended structure, and the weak interchain interactions. Due to the favorable adhesive properties of alternating peptides, these adhesives may be highly suitable for real-world applications.

Injectable Click Chemistry-based Bioadhesives for Accelerated Wound Closure

Tissue adhesives play a vital role in surgical processes as a substitute for sutures in wound closure. However, several existing tissue adhesives suffer from cell toxicity, weak tissue-adhesive strength, and high cost. In this study, by taking advantage of the fast and specific inverse-demand Diels-Alder cycloaddition reaction, a series of bioadhesives were produced by employing copper-free click chemistry pair trans-cyclooctene (TCO) /tetrazine (Tz) in chitosan. The gelation time of the bioadhesives can be optimized to be less than 2 minutes, which meets the need for surgical wound closure in practice. By adding 4-arm polyethylene glycol propionaldehyde (PEG-PALD) as a co-crosslinker, the adhesive strength of the bioadhesives was optimized to be 2.3 times higher than that of the conventional fibrin glue. Moreover, by adjusting the amount of the co-crosslinker, the swelling ratio and pore size of the chitosan bioadhesives can be tuned to fit the need of drug encapsulation and cell seeding. The chitosan bioadhesives possess no significant in vitro cytotoxicity. Using a mice skin incision wound model, we found that the chitosan bioadhesives were able to close the wound faster and promote wound healing process than the fibrin glue. In conclusion, our results support that the innovative click-chemistry based bioadhesives have been developed with improved physical and biological properties for surgical wound closures. STATEMENT OF SIGNIFICANCE: The manuscript describes a new group of click chemistry-based chitosan bioadhesives fabricated by reacting copper-free click chemistry pair trans-cyclooctene/tetrazine with co-crosslinker PEG-PALD. The new bioadhesives possess the properties of simple preparation, injectability, fast gelation, a minimal cytotoxicity, strong adhesive strength to tissue, and enhanced wound healing responses. This innovative strategy may draw interests of readers from the field of biomaterials, drug delivery, surgical device, and translational medicine.

Recent Advances in Tissue Adhesives for Clinical Medicine

Tissue adhesives have attracted more attention to the applications of non-invasive wound closure. The purpose of this review article is to summarize the recent progress of developing tissue adhesives, which may inspire researchers to develop more outstanding tissue adhesives. It begins with a brief introduction to the emerging potential use of tissue adhesives in the clinic. Next, several critical mechanisms for adhesion are discussed, including van der Waals forces, capillary forces, hydrogen bonding, static electric forces, and chemical bonds. This article further details the measurement methods of adhesion and highlights the different types of adhesive, including natural or biological, synthetic and semisynthetic, and biomimetic adhesives. Finally, this review article concludes with remarks on the challenges and future directions for design, fabrication, and application of tissue adhesives in the clinic. This review article has promising potential to provide novel creative design principles for the generation of future tissue adhesives.

Mussel-Inspired Injectable Hydrogel Adhesive Formed under Mild Conditions Features Near-Native Tissue Properties

Injectable hydrogel adhesives, especially those that can strongly adhere to tissues and feature near-native tissue mechanical properties, are desirable biomaterials for tissue repair. Compared to nonadhesive injectable hydrogels for minimally invasive delivery of therapeutic agents, they can better retain the delivered agents at targeted tissue locations and provide additional local physical barriers. However, regardless of recent advances, an ideal injectable hydrogel adhesive with both proper adhesion and mechanical matching between hydrogels and tissues is yet to be demonstrated with cytocompatible and efficient in situ curing methods. Inspired by marine mussels, where different mussel foot proteins (Mfps) function cooperatively to achieve excellent wet adhesion, we herein report a dual-mode-mimicking strategy by modifying gelatin (Gel) biopolymers with a single-type thiourea-catechol (TU-Cat) functionality to mimic two types of Mfps and their mode of action. This strategy features a minor, yet impactful modification of biopolymers, which gives access to collective properties of an ideal injectable hydrogel adhesive. Specifically, with TU-Cat functionalization of only ∼0.4-1.2 mol % of total amino acid residues, the Mfp-mimetic gelatin biopolymer (Gel-TU-Cat) can be injected and cured rapidly under mild and cytocompatible conditions, giving rise to tissue adhesive hydrogels with excellent matrix ductility, proper wet adhesion, and native tissue-like stress relaxation behaviors. Such a set of properties originating from our novel dual-mode-mimicking strategy makes the injectable hydrogel adhesive a promising platform for cell delivery and tissue repair.

Reducing perioperative blood loss with antifibrinolytics and antifibrinolytic-like agents for patients undergoing total hip and total knee arthroplasty

Total hip and knee arthroplasties may be associated with a significant amount of perioperative blood loss. The severity of blood loss may be great enough to require the use of blood transfusions to treat perioperative anemia. Various methods of blood preservation have been studied. The use of antifibrinolytics and antifibrinolytic-like agents to reduce perioperative bleeding has been researched in orthopaedics and other surgical subspecialties. This review aims to evaluate the current evidence supporting the use of tranexamic acid, aminocaproic acid, fibrin tissue adhesive, and aprotinin in the reduction of perioperative blood loss in total hip and knee arthroplasties.

Applications of Highly Stretchable and Tough Hydrogels

Stretchable and tough hydrogels have drawn a lot of attention recently. Due to their unique properties, they have great potential in the application in areas such as mechanical sensing, wound healing, and drug delivery. In this review, we will summarize recent developments of stretchable and tough hydrogels in these areas.

Adhesive Cements That Bond Soft Tissue Ex Vivo

The aim of the present study was to evaluate the soft tissue bond strength of a newly developed, monomeric, biomimetic, tissue adhesive called phosphoserine modified cement (PMC). Two types of PMCs were evaluated using lap shear strength (LSS) testing, on porcine skin: a calcium metasilicate (CS1), and alpha tricalcium phosphate (αTCP) PMC. CS1 PCM bonded strongly to skin, reaching a peak LSS of 84, 132, and 154 KPa after curing for 0.5, 1.5, and 4 h, respectively. Cyanoacrylate and fibrin glues reached an LSS of 207 kPa and 33 kPa, respectively. αTCP PMCs reached a final LSS of ≈110 kPa. In soft tissues, stronger bond strengths were obtained with αTCP PMCs containing large amounts of amino acid (70-90 mol%), in contrast to prior studies in calcified tissues (30-50 mol%). When αTCP particle size was reduced by wet milling, and for CS1 PMCs, the strongest bonding was obtained with mole ratios of 30-50% phosphoserine. While PM-CPCs behave like stiff ceramics after setting, they bond to soft tissues, and warrant further investigation as tissue adhesives, particularly at the interface between hard and soft tissues.

Management of air leaks post-surgical lung resection

Airleaks are one of the most common complications associated with elective lung resection. There have been many techniques and modern advancements in thoracic surgery, however airleaks persist. This review article will discuss several interventions ranging from conservative noninvasive to surgical management of the persistent airleak. These techniques include stopping of suction on the plueravac, fibrin patches, pleurodesis, use of endobronchial valves (EBVs), return to OR for operative intervention, and lastly to send patients home with mini pleuravacs.

Contribution of fibrin glue in the surgery of cyanogenic and non-cyanogenic congenital cardiopathies: retrospective cohort study

Background

Postoperative bleeding in cardiovascular surgery is a frequent and complicated situation for the surgical team, and may also be responsible for significant hospital expenditures. Fibrin glue are indicated in surgery to improve hemostasis when conventional techniques such as compression, sutures or electrocoagulation are insufficient. Through this study, we tried to study the contribution of fibrin glue to the improvement of the clinical parameters (volume of postoperative bleeding, length of stay in intensive care, volume of blood transfusion ...) in two populations having undergone cardiac surgery, one in which we used the fibrin glue and one without fibrin glue.

Methods

This was a retrospective cohort study conducted in the cardiovascular surgery department of our Hospital in Rabat between June 2012 and June 2015. Fibrin glue (Tissucol® of BAXTER) was used in one group with an haemostatic aim. The pre and post-operative clinical data of the patients were analyzed and compared with data from patients who were operated without the use of fibrin glue because it was not yet available in the hospital. The clinical parameters were collected analyzed using the SPSS 13.0 software.

Results

One hundred ten patients were included in this study. The fibrin glue was used intraoperatively in 55 patients and not used in 55 patients. 43 (39.1%) had cyanogenic diseases and 67 (60.9%) had non-cyanogenic pathologies. The volume of transfused red blood cells was lower in patients in whom we used biological glue (p = 0.005), as well as the number of days spent in intensive care (p = 0.02). However, the difference was not significant between the two groups for other parameters such as bleeding volume per kg, the number of units of fresh frozen plasma and the platelet units count transfused.

Conclusions

The results we found show that fibrin glue reduces the duration of hospitalization in resuscitation and reduces the number of units of transfused red blood cells to patients after surgery. However, it does not reduce significantly the total postoperative bleeding volume per weight, the number of fresh frozen plasma units or platelets units transfused. The fibrin glue could therefore be of moderate benefit in pediatric cardiac surgery.

Strong, tough, and repeatable adhesion of an alternating peptide comprising phenyl glycine as a repeating unit

A new strategy for preparing peptide-based adhesive materials is provided. An exactly alternating peptide with glycine-N-butylphenyl glycine dipeptide repeating units exhibits excellent repeatable adhesion capacity. The adhesive properties are attributed to the viscoelastic properties and microfibril formation, which are tunable by simple manipulation of the reaction component on polymerization.