Common causes of glucose oxidase instability in in vivo biosensing: a brief review

Latest advances in glucose-responsive microneedle-based systems for transdermal insulin delivery

The development of a self-regulated minimally invasive system for insulin delivery can be considered as the holy grail in the field of diabetes mellitus. A delivery system capable of releasing insulin in response to blood glucose levels would significantly improve the quality of life of diabetic patients, eliminating the need for frequent finger-prick tests and providing better glycaemic control with lower risk of hypoglycaemia. In this context, the latest advances in glucose-responsive microneedle-based transdermal insulin delivery are here compiled with a thorough analysis of the delivery mechanisms and challenges lying ahead in their clinical translation. Two main groups of microneedle-based systems have been developed so far: glucose oxidase-containing and phenylboronic acid-containing systems. Both strategies in combination have also been tested and two other novel strategies are under development, namely electronic closed-loop and glucose transporter-based systems. Results from preclinical studies conducted using these different types of glucose-triggered release systems are comprehensively discussed. Altogether, this analysis from both a mechanistic and translational perspective will provide rationale and/or guidance for future trends in the research hotspot of glucose-responsive microneedle-based insulin delivery systems.

Effect of Protection Polymer Coatings on the Performance of an Amperometric Galactose Biosensor in Human Plasma

Galactose monitoring in individuals allows the prevention of harsh health conditions related to hereditary metabolic diseases like galactosemia. Current methods of galactose detection need development to obtain cheaper, more reliable, and more specific sensors. Enzyme-containing amperometric sensors based on galactose oxidase activity are a promising approach, which can be enhanced by means of their inclusion in a redox polymer coating. This strategy simultaneously allows the immobilization of the biocatalyst to the electroactive surface and hosts the electron shuttling units. An additional deposition of capping polymers prevents external interferences like ascorbic or uric acid as well as biofouling when measuring in physiological fuels. This work studies the protection effect of poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate (MPC) and polyvinylimidazole-polysulfostyrene (P(VI-SS)) when incorporated in the biosensor design for the detection of galactose in human plasma.

A Potentially Versatile Enzyme Sensor Platform: Enzyme-Loaded, Tagged, Porous Polymeric Nanocapsules

Enzymes are essential to life and indispensable in a wide range of industries (food, pharmaceutical, medical, biosensing, etc.); however, a significant shortcoming of these fragile biological catalysts is their poor stability. To address this challenge, a variety of immobilization methods have been described to enhance the enzyme's stability. These immobilization methods generally are specific to an individual enzyme or optimal for a particular application. The aim of this study is to explore the utility of porous, indicator moiety-tagged, polymeric nanocapsules (NCs) for the encapsulation of enzymes and measurement of the enzyme's substrate. As a model enzyme, glucose oxidase (GOx) is used. The GOx enzyme-loaded, fluorophore-tagged NCs were synthesized by using self-assembled surfactant vesicle templates. To show that the biological activity of GOx is preserved during entrapment, the rate of the GOx enzyme catalyzed reaction was measured. To evaluate the protective features of the porous NCs, the encapsulated GOx enzyme activity was followed in the presence of hydrolytic enzymes. During the encapsulation of GOx and the purification of the GOx-loaded NCs, the GOx activity decayed less than 10%, and up to 30% of the encapsulated GOx activity could be retained for 3-5 days in the presence of hydrolytic enzymes. In support of the potentially unique advantages of the enzyme-loaded NCs, as a proof-of-concept example, the fluorophore-tagged, GOx-loaded NCs were used for the determination of glucose in the concentration range between 18 and 162 mg/dL and for imaging the distribution of glucose concentration in imaging experiments.

Nanotopography-enhanced biomimetic coating maintains bioactivity after weeks of dry storage and improves chronic neural recording

We developed a nanoparticle base layer technology capable of maintaining the bioactivity of protein-based neural probe coating intended to improve neural recording quality. When covalently bound on thiolated nanoparticle (TNP) modified surfaces, neural adhesion molecule L1 maintained bioactivity throughout 8 weeks of dry storage at room temperature, while those bound to unmodified surfaces lost 66% bioactivity within 3 days. We tested the TNP + L1 coating in mouse brains on two different neural electrode arrays after two different dry storage durations (3 and 28 days). The results show that dry-stored coating is as good as the freshly prepared, and even after 28 days of storage, the number of single units per channel and signal-to-noise ratio of the TNP + L1 coated arrays were significantly higher by 32% and 40% respectively than uncoated controls over 16 weeks. This nanoparticle base layer approach enables the dissemination of biomolecule-functionalized neural probes to users worldwide and may also benefit a broad range of applications that rely on surface-bound biomolecules.

Nature-Inspired Biomolecular Corona Based on Poly(caffeic acid) as a Low Potential and Time-Stable Glucose Biosensor

Herein, we present a novel biosensor based on nature-inspired poly(caffeic acid) (PCA) grafted to magnetite (Fe3O4) nanoparticles with glucose oxidase (GOx) from Aspergillus niger via adsorption technique. The biomolecular corona was applied to the fabrication of a biosensor system with a screen-printed electrode (SPE). The obtained results indicated the operation of the system at a low potential (0.1 V). Then, amperometric measurements were performed to optimize conditions like various pH and temperatures. The SPE/Fe3O4@PCA-GOx biosensor presented a linear range from 0.05 mM to 25.0 mM, with a sensitivity of 1198.0 μA mM-1 cm-2 and a limit of detection of 5.23 μM, which was compared to other biosensors presented in the literature. The proposed system was selective towards various interferents (maltose, saccharose, fructose, L-cysteine, uric acid, dopamine and ascorbic acid) and shows high recovery in relation to tests on real samples, up to 10 months of work stability. Moreover, the Fe3O4@PCA-GOx biomolecular corona has been characterized using various techniques such as Fourier transform infrared spectroscopy (FTIR), high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and Bradford assay.

Chitosan-based injectable hydrogels with dual glucose sensors for precise control of insulin release and diabetes mellitus therapy

Chitosan-based injectable hydrogels were designed and fabricated through the dynamic crosslinking of dual-reversible covalent bonds (imine and phenylboronate ester) for precise insulin release. The hydrogels contain dual glucose-sensors/responsive elements, featuring high sensitivity and rapid responsiveness to glucose level variation in cumulative and half-hourly pulsed insulin release. The hydrogels demonstrated improved cytocompatibility against HSF cells and histological long-term analysis of tissue after implantation. Evaluation of the glycemic control ability in STZ-induced hyperglycemic mice revealed that the hydrogel system showed excellent glycemic control ability in the glucose tolerance test and maintained blood glucose levels in a normal range for up to 11 days after a single administration. Thus, the hydrogel system showed applicable potential in insulin replacement therapy for diabetes mellitus.

Pd nanocatalysts adsorbed onto silica nanoparticle coated indium tin oxide: a reusable nanozyme for glucose detection

Nanozymes are nanomaterials that exhibit enzyme-like activity upon exposure to a substrate solution. The use of noble and platinum group metals enhances enzyme-like catalytic activity. However, noble metals are obtained at a high cost; therefore, their recovery after use is of high importance. Herein, we report the fabrication of indium tin oxide-silica nanoparticles decorated with palladium nanoparticles (ITO-SiO2-prS-PdNPs). The ITO-SiO2-prS-PdNPs were evaluated for peroxidase-like activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H2O2. A colour change from clear or colourless TMB to blue colour (oxidized TMB products) was observed confirming the peroxidase-like activity. A typical Michaelis-Menten enzyme-like behaviour is observed with Km values of 0.68 mM for H2O2 and 0.47 mM for TMB, which are better than the reported values for horse-radish peroxidase (HRP) for the same substrate. The peroxidase-like activity of ITO-SiO2-prS-PdNPs was found to proceed via the electron-transfer mechanism. The ITO-SiO2-prS-PdNPs were cleaned successfully after each use by rinsing with water and ethanol solution thus making the surface simple and easy to recover and reuse. A reusable and highly selective colorimetric assay for glucose detection based on the peroxidase-like activity of ITO-SiO2-prS-PdNPs gave excellent results. ITO-SiO2-prS-PdNPs exhibited a good linear range of 5.0-30 μM, a low limit of detection (LOD) of 1.84 μM and a limit of quantification (LOQ) of 6.14 μM. Finally, the nanozyme (ITO-SiO2-prS-PdNPs) was successfully used to detect glucose in a complex newborn calf serum (NCS), representing a real sample.

Cross-Linkable Polymer-Based Multi-layers for Protecting Electrochemical Glucose Biosensors against Uric Acid, Ascorbic Acid, and Biofouling Interferences

The lifetime of implantable electrochemical glucose monitoring devices is limited due to the foreign body response and detrimental effects from ascorbic acid (AA) and uric acid (UA) interferents that are components of physiological media. Polymer coatings can be used to shield biosensors from these interferences and prolong their functional lifetime. This work explored several approaches to protect redox polymer-based glucose biosensors against such interferences by designing six targeted multi-layer sensor architectures. Biological interferents, like cells and proteins, and UA and AA interferents were found to have individual effects on the current density and operational stability of glucose biosensors, requiring individual protection and treatment. Protection against biofouling can be achieved using a poly(2-methacryloyloxyethyl phosphorylcholine-co-glycidyl methacrylate) (MPC) zwitterionic polymer coating. An enzyme-scavenging approach was compared to electrostatic repulsion by negatively charged polymers for protection against AA and UA interferences. A multi-layer novel polymer design (PD) system consisting of a cross-linkable negatively charged polyvinylimidazole-polysulfostyrene co-polymer inner layer and a cross-linkable MPC zwitterionic polymer outer layer showed the best protection against AA, UA, and biological interferences. The sensor protected using the novel PD shield displayed the lowest mean absolute relative difference between the glucose reading without the interferent and the reading value with the interferent present and also displayed the lowest variability in sensor readings in complex media. For sensor measurements in artificial plasma, the novel PD extends the linear range (R² = 0.99) of the sensor from 0-10 mM for the control to 0-20 mM, shows a smaller decrease in sensitivity, and retains high current densities. The application of PD multi-target coating improves sensor performance in complex media and shows promise for use in sensors operating in real conditions.

Continuous Glucose Monitoring Enabled by Fluorescent Nanodiamond Boronic Hydrogel

Continuous monitoring of glucose allows diabetic patients to better maintain blood glucose level by altering insulin dosage or diet according to prevailing glucose values and thus to prevent potential hyperglycemia and hypoglycemia. However, current continuous glucose monitoring (CGM) relies mostly on enzyme electrodes or micro-dialysis probes, which suffer from insufficient stability, susceptibility to corrosion of electrodes, weak or inconsistent correlation, and inevitable interference. A fluorescence-based glucose sensor in the skin will likely be more stable, have improved sensitivity, and can resolve the issues of electrochemical interference from the tissue. This study develops a fluorescent nanodiamond boronic hydrogel system in porous microneedles for CGM. Fluorescent nanodiamond is one of the most photostable fluorophores with superior biocompatibility. When surface functionalized, the fluorescent nanodiamond can integrate with boronic polymer and form a hydrogel, which can produce fluorescent signals in response to environmental glucose concentration. In this proof-of-concept study, the strategy for building a miniatured device with fluorescent nanodiamond hydrogel is developed. The device demonstrates remarkable long-term photo and signal stability in vivo with both small and large animal models. This study presents a new strategy of fluorescence based CGM toward treatment and control of diabetes.

Continuous Glucose Monitoring in Hypoxic Environments Based on Water Splitting-Assisted Electrocatalysis

Conventional enzyme-based continuous glucose sensors in interstitial fluid usually rely on dissolved oxygen as the electron-transfer mediator to bring electrons from oxidase to electrode while generating hydrogen peroxide. This may lead to several problems. First, the sensor may provide biased detection results owing to fluctuation of oxygen in interstitial fluid. Second, the polymer coatings that regulate the glucose/oxygen ratio can affect the dynamic response of the sensor. Third, the glucose oxidation reaction continuously produces corrosive hydrogen peroxide, which may compromise the long-term stability of the sensor. Here, we introduce an oxygen-independent nonenzymatic glucose sensor based on water splitting-assisted electrocatalysis for continuous glucose monitoring. For the water splitting reaction (i.e., hydrogen evolution reaction), a negative pretreatment potential is applied to produce a localized alkaline condition at the surface of the working electrode for subsequent nonenzymatic electrocatalytic oxidation of glucose. The reaction process does not require the participation of oxygen; therefore, the problems caused by oxygen can be avoided. The nonenzymatic sensor exhibits acceptable sensitivity, reliability, and biocompatibility for continuous glucose monitoring in hypoxic environments, as shown by the in vitro and in vivo measurements. Therefore, we believe that it is a promising technique for continuous glucose monitoring, especially for clinically hypoxic patients.

Critical Parameters in an Enzymatic Way to Obtain the Unsweet Lactose-Free Milk Using Catalase and Glucose Oxidase Co-Encapsulated into Hydrogel with Chemical Cross-Linking

The presented work involves obtaining and characterising a two-enzymatic one-pot bioreactor, including encapsulated (co-immobilised) glucose oxidase and catalase. The enzymatic capsules were applied to produce unsweet, lactose-free milk during low-temperature catalysis. Furthermore, operational conditions, like pH and aeration, were selected in the paper, which sorts out discrepancies in literature reports. All experiments were carried out at 12 °C, corresponding to milk storage and transportation temperature. Preliminary studies (for reasons of analytical accuracy) were carried out in a buffer (pH, concentration of sugars mimicking conditions in the lactose-free milk, the initial glucose concentration 27.5 g/L) verified by processes carried out in milk in the final stage of the study. The presented results showed the need for regulating pH and the aeration of the reaction mixture in the continuous mode during the process. The procedure of co-immobilisation was performed in an alginate matrix with the cross-linking of glutaraldehyde or carbodiimide while carbodiimide showed better enzymes retention inside alginate capsules. Co-encapsulated enzymes could be used for nine cycles, preserving finally about 40% of the initial activity.

Synthetic control of the surface area in nickel cobalt oxide for glucose detection via additive-assisted wet chemical method

We investigated the effect of specific surface area on the electrochemical properties of NiCo₂O₄ (NCO) for glucose detection. NCO nanomaterials with controlled specific surface areas were prepared by additive-assisted hydrothermal synthesis, and self-assembled nanostructures with urchin-, pine-needle-, tremella-, and flower-like morphologies were obtained. The novelty of this method is the systematic control of chemical reaction routes assisted by the addition of different additives during synthesis, which results in the spontaneous formation of various morphologies without any difference in the crystal structure and chemical states of the constituent elements. Such morphological control of NCO nanomaterials leads to considerable changes in the electrochemical performance for glucose detection. Combined with materials characterization, the relationship between the specific surface area and the electrochemical performance is discussed for glucose detection. This work can provide scientific insights for tailoring the surface area of nanostructures, which determines their functionality for potential applications in glucose biosensors.

Raman Studies on Surface-Imprinted Polymers to Distinguish the Polymer Surface, Imprints, and Different Bacteria

Molecularly imprinted polymers (MIPs) are widely used as robust biomimetic recognition layers in sensing devices targeting a wide variety of analytes including microorganisms such as bacteria. Assessment of imprinting success and selectivity toward the target is of great importance in MIP quality control. We generated Escherichia coli-imprinted poly(styrene-co-DVB) as a model system for bacteria-imprinted polymers via surface imprinting using a glass stamp with covalently immobilized E. coli. Confocal Raman Microscopy was successfully employed to visualize bacteria, imprints, and polymer and to distinguish them from each other. The method has proven highly feasible for assessing if imprinting had been successful. In addition, we developed a method for selectivity investigation of bacteria MIPs based on combining Confocal Raman Microscopy and Partial Least Squares Discriminant Analysis (PLS-DA). The Raman spectra of E. coli and Bacillus cereus were acquired on E. coli-imprinted poly(styrene-co-DVB) and used to establish a PLS-DA model for differentiating between the bacteria species. Model validation demonstrated a correct classification of 95% of Raman spectra, indicating sufficient accuracy of the model for future use in MIP selectivity studies. Simultaneous differentiation of 3 bacteria species (E. coli, B. cereus, and Lactococcus lactis) on E. coli-imprinted poly(styrene-co-DVB) proved more difficult, which might be due to the limited depth resolution of the confocal Raman microscope resulting in the presence of interfering signals from the polymer substrate. It might be possible to overcome this obstacle by selective enhancement of the Raman signals originating from bacteria surfaces, such as tip enhanced Raman spectroscopy.

Microneedle-based insulin transdermal delivery system: current status and translation challenges

Diabetes mellitus is a metabolic disease manifested by hyperglycemia. For patients with type 1 and advanced type 2 diabetes mellitus, insulin therapy is essential. Subcutaneous injection remains the most common administration method. Non-invasive insulin delivery technologies are pursued because of their benefits of decreasing patients' pain, anxiety, and stress. Transdermal delivery systems have gained extensive attention due to the ease of administration and absence of hepatic first-pass metabolism. Microneedle (MN) technology is one of the most promising tactics, which can effectively deliver insulin through skin stratum corneum in a minimally invasive and painless way. This article will review the research progress of MNs in insulin transdermal delivery, including hollow MNs, dissolving MNs, hydrogel MNs, and glucose-responsive MN patches, in which insulin dosage can be strictly controlled. The clinical studies about insulin delivery with MN devices have also been summarized and grouped based on the study phase. There are still several challenges to achieve successful translation of MNs-based insulin therapy. In this review, we also discussed these challenges including safety, efficacy, patient/prescriber acceptability, manufacturing and scale-up, and regulatory authority acceptability.

Review: Nanomaterials for Reactive Oxygen Species Detection and Monitoring in Biological Environments

Reactive oxygen species (ROS) and dissolved oxygen play key roles across many biological processes, and fluorescent stains and dyes are the primary tools used to quantify these species in vitro. However, spatio-temporal monitoring of ROS and dissolved oxygen in biological systems are challenging due to issues including poor photostability, lack of reversibility, and rapid off-site diffusion. In particular, ROS monitoring is hindered by the short lifetime of ROS molecules and their low abundance. The combination of nanomaterials and fluorescent detection has led to new opportunities for development of imaging probes, sensors, and theranostic products, because the scaffolds lead to improved optical properties, tuneable interactions with cells and media, and ratiometric sensing robust to environmental drift. In this review, we aim to critically assess and highlight recent development in nanosensors and nanomaterials used for the detection of oxygen and ROS in biological systems, and their future potential use as diagnosis tools.

In vitro and in vivo detection of lactate with nanohybrid-functionalized Pt microelectrode facilitating assessment of tumor development

Accelerated glucose uptake and "aerobic glycolysis" of tumor cells generates a high-level lactate in extracellular space and within tumor tissue, which is thought to be a hallmark of tumor and closely correlated with tumor development. Here, we report the development of an enzyme-free electrochemical sensing platform based on a Pt-microneedle electrode functionalized with Au nanoparticles (Au-NPs) decorated polydopamine nanospheres (PDA-NSs), and explore its practical application in in vitro and in vivo detection of lactate in different biological samples. Our results demonstrate that in virtue of the nanostructured merits and high electrocatalytic activity, the resultant nanohybrid-microelectrode exhibits good sensitivity and selectivity to the nonenzymatic electrochemical detection of lactate, with a detection limit of 50 μM, a liner range of 0.375-12 mM, and a sensitivity of 11.25 mA mM^-1 cm^-2, as well as a good anti-interference ability to other active small molecules. The platform quantifies lactate in complex bio-fluids, including cancerous and non-cancerous cell culture media, as well as serum samples, with detecting time 7.5-fold faster than does a clinically-used approach. Moreover, owing to miniaturized size and satisfactory electrochemical performance, the sensor achieves in vivo recording of lactate-related characteristic voltammetric signals within a living tumor, which are positively correlated with tumor burden and growth. Therefore, the platform cannot only be employed for cancer metabolic investigation, but also potentially for clinical assessment of tumor progression, and even clinical diagnosis of other lactate metabolism disorders.

Developments of the Electroactive Materials for Non-Enzymatic Glucose Sensing and Their Mechanisms

A comprehensive review of the electroactive materials for non-enzymatic glucose sensing and sensing devices has been performed in this work. A general introduction for glucose sensing, a facile electrochemical technique for glucose detection, and explanations of fundamental mechanisms for the electro-oxidation of glucose via the electrochemical technique are conducted. The glucose sensing materials are classified into five major systems: (1) mono-metallic materials, (2) bi-metallic materials, (3) metallic-oxide compounds, (4) metallic-hydroxide materials, and (5) metal-metal derivatives. The performances of various systems within this decade have been compared and explained in terms of sensitivity, linear regime, the limit of detection (LOD), and detection potentials. Some promising materials and practicable methodologies for the further developments of glucose sensors have been proposed. Firstly, the atomic deposition of alloys is expected to enhance the selectivity, which is considered to be lacking in non-enzymatic glucose sensing. Secondly, by using the modification of the hydrophilicity of the metallic-oxides, a promoted current response from the electro-oxidation of glucose is expected. Lastly, by taking the advantage of the redistribution phenomenon of the oxide particles, the usage of the noble metals is foreseen to be reduced.

Analytical Parameters of a Novel Glucose Biosensor Based on Grafted PFM as a Covalent Immobilization Technique

Bioanalytical methods, in particular electrochemical biosensors, are increasingly used in different industrial sectors due to their simplicity, low cost, and fast response. However, to be able to reliably use this type of device, it is necessary to undertake in-depth evaluation of their fundamental analytical parameters. In this work, analytical parameters of an amperometric biosensor based on covalent immobilization of glucose oxidase (GOx) were evaluated. GOx was immobilized using plasma-grafted pentafluorophenyl methacrylate (pgPFM) as an anchor onto a tailored HEMA-co-EGDA hydrogel that coats a titanium dioxide nanotubes array (TiO2NTAs). Finally, chitosan was used to protect the enzyme molecules. The biosensor offered outstanding analytical parameters: repeatability (RSD = 1.7%), reproducibility (RSD = 1.3%), accuracy (deviation = 4.8%), and robustness (RSD = 2.4%). In addition, the Ti/TiO2NTAs/ppHEMA-co-EGDA/pgPFM/GOx/Chitosan biosensor showed good long-term stability; after 20 days, it retained 89% of its initial sensitivity. Finally, glucose concentrations of different food samples were measured and compared using an official standard method (HPLC). Deviation was lower than 10% in all measured samples. Therefore, the developed biosensor can be considered to be a reliable analytical tool for quantification measurements.

Raising the 'Good' Oxidants for Immune Protection

Redox medicine is a new therapeutic concept targeting reactive oxygen species (ROS) and secondary reaction products for health benefit. The concomitant function of ROS as intracellular second messengers and extracellular mediators governing physiological redox signaling, and as damaging radicals instigating or perpetuating various pathophysiological conditions will require selective strategies for therapeutic intervention. In addition, the reactivity and quantity of the oxidant species generated, its source and cellular location in a defined disease context need to be considered to achieve the desired outcome. In inflammatory diseases associated with oxidative damage and tissue injury, ROS source specific inhibitors may provide more benefit than generalized removal of ROS. Contemporary approaches in immunity will also include the preservation or even elevation of certain oxygen metabolites to restore or improve ROS driven physiological functions including more effective redox signaling and cell-microenvironment communication, and to induce mucosal barrier integrity, eubiosis and repair processes. Increasing oxidants by host-directed immunomodulation or by exogenous supplementation seems especially promising for improving host defense. Here, we summarize examples of beneficial ROS in immune homeostasis, infection, and acute inflammatory disease, and address emerging therapeutic strategies for ROS augmentation to induce and strengthen protective host immunity.

Engineering the Turnover Stability of Cellobiose Dehydrogenase toward Long-Term Bioelectronic Applications

Cellobiose dehydrogenase (CDH) is an attractive oxidoreductase for bioelectrochemical applications. Its two-domain structure allows the flavoheme enzyme to establish direct electron transfer to biosensor and biofuel cell electrodes. Yet, the application of CDH in these devices is impeded by its limited stability under turnover conditions. In this work, we aimed to improve the turnover stability of CDH by semirational, high-throughput enzyme engineering. We screened 13 736 colonies in a 96-well plate setup for improved turnover stability and selected 11 improved variants. Measures were taken to increase the reproducibility and robustness of the screening setup, and the statistical evaluation demonstrates the validity of the procedure. The selected CDH variants were expressed in shaking flasks and characterized in detail by biochemical and electrochemical methods. Two mechanisms contributing to turnover stability were found: (i) replacement of methionine side chains prone to oxidative damage and (ii) the reduction of oxygen reactivity achieved by an improved balance of the individual reaction rates in the two CDH domains. The engineered CDH variants hold promise for the application in continuous biosensors or biofuel cells, while the deduced mechanistic insights serve as a basis for future enzyme engineering approaches addressing the turnover stability of oxidoreductases in general.

Long-Term Continuous Glucose Monitoring Using a Fluorescence-Based Biocompatible Hydrogel Glucose Sensor

Fluorescence-based hydrogel glucose sensors with boronic acid-based glucose recognition are promising regarding their potential to improve continuous glucose monitoring by facilitating long-lasting accuracy. However, these sensors typically become encapsulated after implantation, and the dynamic range decreases following long-term implantation and use. Herein, a four-arm polyethylene glycol (PEG) hydrogel is developed with an immobilized glucose-responsive fluorescence dye (GF-PEG-gel); this hydrogel is effective in mitigating foreign body reactions (FBRs) that hinder stable glucose responses in vivo. The GF-PEG-gel attached to an implantable device successfully traces blood glucose concentrations in diabetic model rats for 45 days. A pig experiment shows that the device measures the glucose concentration with an equivalent accuracy to that required for clinically available settings.

Enzyme functionalized microgels enable precise regulation of dissolved oxygen and anaerobe culture

Anaerobes are a major constituent of the gut microbiome and profoundly influence the overall health of humans. However, the lack of a simple, cost-effective, and scalable system that mimics the anaerobic conditions of the human gut is hindering research on the gut microbiome and the development of therapeutics. Here, we address this gap by using glucose oxidase and catalase containing gelatin microparticles (GOx-CAT-GMPs) to precisely regulate dissolved oxygen concentration [O2] via GOx-mediated consumption of oxygen. Fluorescence images generated using conjugated polymer afterglow nanoparticles showed that [O2] can be tuned from 257.9 ​± ​6.2 to 0.0 ​± ​4.0 ​μM using GOx-CAT-GMPs. Moreover, when the obligate anaerobe Bacteroides thetaiotaomicron was inoculated in media containing GOx-CAT-GMPs, bacterial growth under ambient oxygen was comparable to control conditions in an anaerobic chamber (5.4 ​× ​105 and 8.8 ​× ​105 colony forming units mL-1, respectively). Finally, incorporating GOx-CAT-GMPs into a bioreactor that permitted continuous radial diffusion of oxygen and glucose generated a gut-mimetic [O2] gradient of 132.4 ​± ​2.6 ​μM in the outer ring of the reactor to 7.9 ​± ​1.7 ​μM at the core. Collectively, these results indicate that GOx-CAT-GMPs are highly effective oxygen-regulating materials. These materials can potentially be leveraged to advance gut microbiome research and fecal microbiota transplantation, particularly in low-resource settings.

Developing Insulin Delivery Devices with Glucose Responsiveness

Individuals with type 1 and advanced type 2 diabetes require daily insulin therapy to maintain blood glucose levels in normoglycemic ranges to prevent associated morbidity and mortality. Optimal insulin delivery should offer both precise dosing in response to real-time blood glucose levels as well as a feasible and low-burden administration route to promote long-term adherence. A series of glucose-responsive insulin delivery mechanisms and devices have been reported to increase patient compliance while mitigating the risk of hypoglycemia. This review discusses currently available insulin delivery devices, overviews recent developments towards the generation of glucose-responsive delivery systems, and provides commentary on the opportunities and barriers ahead regarding the integration and translation of current glucose-responsive insulin delivery designs.

The vast repertoire of carbohydrate oxidases: An overview

Carbohydrates are widely abundant molecules present in a variety of forms. For their biosynthesis and modification, nature has evolved a plethora of carbohydrate-acting enzymes. Many of these enzymes are of particular interest for biotechnological applications, where they can be used as biocatalysts or biosensors. Among the enzymes catalysing conversions of carbohydrates are the carbohydrate oxidases. These oxidative enzymes belong to different structural families and use different cofactors to perform the oxidation reaction of CH-OH bonds in carbohydrates. The variety of carbohydrate oxidases available in nature reflects their specificity towards different sugars and selectivity of the oxidation site. Thanks to their properties, carbohydrate oxidases have received a lot of attention in basic and applied research, such that nowadays their role in biotechnological processes is of paramount importance. In this review we provide an overview of the available knowledge concerning the known carbohydrate oxidases. The oxidases are first classified according to their structural features. After a description on their mechanism of action, substrate acceptance and characterisation, we report on the engineering of the different carbohydrate oxidases to enhance their employment in biocatalysis and biotechnology. In the last part of the review we highlight some practical applications for which such enzymes have been exploited.

Screen-Printed Glucose Sensors Modified with Cellulose Nanocrystals (CNCs) for Cell Culture Monitoring

Glucose sensors are potentially useful tools for monitoring the glucose concentration in cell culture medium. Here, we present a new, low-cost, and reproducible sensor based on a cellulose-based material, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized-cellulose nanocrystals (CNCs). This novel biocompatible and inert nanomaterial is employed as a polymeric matrix to immobilize and stabilize glucose oxidase in the fabrication of a reproducible, operationally stable, highly selective, cost-effective, screen-printed glucose sensor. The sensors have a linear range of 0.1–2 mM (R² = 0.999) and a sensitivity of 5.7 ± 0.3 µA cm⁻²∙mM⁻¹. The limit of detection is 0.004 mM, and the limit of quantification is 0.015 mM. The sensor maintains 92.3 % of the initial current response after 30 consecutive measurements in a 1 mM standard glucose solution, and has a shelf life of 1 month while maintaining high selectivity. We demonstrate the practical application of the sensor by monitoring the glucose consumption of a fibroblast cell culture over the course of several days.

Anti-Biofouling Strategies for Long-Term Continuous Use of Implantable Biosensors

The growing trend for personalized medicine calls for more reliable implantable biosensors that are capable of continuously monitoring target analytes for extended periods (i.e., >30 d). While promising biosensors for various applications are constantly being developed in the laboratories across the world, many struggle to maintain reliable functionality in complex in vivo environments over time. In this review, we explore the impact of various biotic and abiotic failure modes on the reliability of implantable biosensors. We discuss various design considerations for the development of chronically reliable implantable biosensors with a specific focus on strategies to combat biofouling, which is a fundamental challenge for many implantable devices. Briefly, we introduce the process of the foreign body response and compare the in vitro and the in vivo performances of state-of-the-art implantable biosensors. We then discuss the latest development in material science to minimize and delay biofouling including the usage of various hydrophilic, biomimetic, drug-eluting, zwitterionic, and other smart polymer materials. We also explore a number of active anti-biofouling approaches including stimuli-responsive materials and mechanical actuation. Finally, we conclude this topical review with a discussion on future research opportunities towards more reliable implantable biosensors.

Hydrogel Glucose Sensor with In Vivo Stable Fluorescence Intensity Relying on Antioxidant Enzymes for Continuous Glucose Monitoring

Hydrogel glucose sensors with boronic acid-based fluorescence intensity theoretically hold promise to improve in vivo continuous glucose monitoring (CGM) by facilitating long-lasting accuracy. However, these sensors generally degrade after implantation and the fluorescence intensity decreases immediately over time. Herein, we describe a hydrogel glucose sensor with in vivo stability based on boronic acid-based fluorescence intensity, integrating two antioxidant enzymes, superoxide dismutase (SOD), and catalase. These protected the arylboronic acid from being degraded by hydrogen peroxide in vitro and preserved the boronic acid-based fluorescence intensity of the hydrogel glucose sensors in rats for 28 days. These antioxidant enzymes also allowed the hydrogel glucose sensor attached to a homemade semi-implantable CGM device to trace blood glucose concentrations in rats for 5 h with the accuracy required for clinical settings. Hydrogel glucose sensors with boronic acid-based fluorescence intensity containing SOD and catalase could comprise a new strategy for in vivo CGM.

•

The arylboronic acids of hydrogel glucose sensors are sensitive to cleavage by ROS

•

The antioxidant enzymes suppress the degradation of fluorescence effectively in vivo

•

The developed sensor performs CGM with the accuracy required for clinical settings

An Optical Urate Biosensor Based on Urate Oxidase and Long-Lifetime Metalloporphyrins

Gout is a condition that affects over 8 million Americans. This condition is characterized by severe pain, and in more advanced cases, bone erosion and joint destruction. This study explores the fabrication and characterization of an optical, enzymatic urate biosensor for gout management, and the optimization of the biosensor response through the tuning of hydrogel matrix properties. Sensors were fabricated through the co-immobilization of oxygen-quenched phosphorescent probes with an oxidoreductase within a biocompatible copolymer hydrogel matrix. Characterization of the spectral properties and hydrogel swelling was conducted, as well as evaluation of the response sensitivity and long-term stability of the urate biosensor. The findings indicate that increased acrylamide concentration improved the biosensor response by yielding an increased sensitivity and reduced lower limit of detection. However, the repeatability and stability tests highlighted some possible areas of improvement, with a consistent response drift observed during repeatability testing and a reduction in response seen after long-term storage tests. Overall, this study demonstrates the potential of an on-demand, patient-friendly gout management tool, while paving the way for a future multi-analyte biosensor based on this sensing platform.

Enzyme production ofd-gluconic acid and glucose oxidase: successful tales of cascade reactions

This review mainly focuses on the use of glucose oxidase in the production ofd-gluconic acid, which is a reactant of undoubtable interest in different industrial areas. As example of diverse enzymatic cascade reactions.

Silicon-Based Glucose Oxidase Working Electrode for Glucose Sensing

We created a glucose oxidase (GOx) working electrode on a silicon-on-insulator (SOI) wafer for glucose sensing. The SOI wafer was electrically connected to a copper wire, and the GOx was immobilized onto the hydrophilized SOI surface via silanization with aminopropyltriethoxysilane and glutaraldehyde. Electrochemical analysis (i.e., cyclic voltammetry) was employed to identify the sensing mechanism and to evaluate the performance of these SOI-GOx glucose sensors. The response of the SOI-GOx working electrode was significantly higher in the presence of oxygen than that without oxygen, indicating that a hydrogen peroxide pathway dominated in our SOI-GOx electrode. The height of cathodic peaks increased linearly with the increase of glucose concentrations up to 15 mM. The SOI-GOx working electrode displayed good stability after more than 30 cycles. On the 133^rd day after the electrode was made, although the response of the SOI-GOx electrode dropped to about one-half of its original response, it was still capable of distinguishing different glucose concentrations. This work suggests that the SOI-GOx working electrode that we developed might be a promising candidate for implantable glucose sensors.

Plasmonic Microneedle Arrays for in Situ Sensing with Surface-Enhanced Raman Spectroscopy (SERS)

Surface-enhanced Raman spectroscopy (SERS) is a sensitive, chemically specific, and short-time response probing method with significant potential in biomedical sensing. This paper reports the integration of SERS with microneedle arrays as a minimally invasive platform for chemical sensing, with a particular view toward sensing in interstitial fluid (ISF). Microneedle arrays were fabricated from a commercial polymeric adhesive and coated with plasmonically active gold nanorods that were functionalized with the pH-sensitive molecule 4-mercaptobenzoic acid. This sensor can quantitate pH over a range of 5 to 9 and can detect pH levels in an agar gel skin phantom and in human skin in situ. The sensor array is stable and mechanically robust in that it exhibits no loss in SERS activity after multiple punches through an agar gel skin phantom and human skin or after a month-long incubation in phosphate-buffered saline. This work is the first to integrate SERS-active nanoparticles with polymeric microneedle arrays and to demonstrate in situ sensing with this platform.

Biomolecular interfaces based on self-assembly and self-recognition form biosensors capable of recording molecular binding and release

This research proposed to create the next generation of versatile electrochemical-based biosensors capable of monitoring target capture and release as dictated by molecular binding or unbinding. The biosensor integrates cellular machines (i.e., microtubules, structural elements of cells and kinesin molecular motors involved in cellular transport) as functional units; its assembly is based on molecular self-assembly and self-recognition. Our results demonstrate that the designed biosensor was capable of allowing detection of binding and unbinding events based on redox reactions at user-controlled electrode interfaces. The analysis also showed that the sensitivity of the designed biosensor or its ability to record such events could be user-controlled at any given time by adjusting the energy source that "fuels" the system.

Sensors for biosensors: a novel tandem monitoring in a droplet towards efficient screening of robust design and optimal operating conditions

Development of a tandem monitoring approach that allows the simultaneous on-line detection of multiple biosensor system parameters.

Organometallic-Constructed Tip-Based Dual Chemical Sensing by Tip-Enhanced Raman Spectroscopy for Diabetes Detection

Tip-enhanced Raman spectroscopy (TERS) is capable of probing specific molecular information with high sensitivity, but dual chemical sensing remains a challenge. Another major hindrance to TERS chemical detection in biosamples such as blood is the interference from the strong absorptions of biomolecules. Herein, we report the preparation of an organometallic-conjugated TERS tip. We demonstrate that organometallic chemistry can be perfectly coupled with TERS for dual-molecule sensing. The unique Raman signals generated by the organometallic compound circumvent signal interference from the biomolecules in blood, allowing the rapid analysis of two important molecules (glucose and thiol) in ultralow volume (50 nL) samples. This enabled a correlation between the thiol and glucose levels in the blood of nondiabetic and diabetic patients to be drawn.