3D Bioprinting of Hyaline Cartilage Using Nasal Chondrocytes

Due to the limited self-repair capacity of the hyaline cartilage, the repair of cartilage remains an unsolved clinical problem. Tissue engineering strategy with 3D bioprinting technique has emerged a new insight by providing patient's personalized cartilage grafts using autologous cells for hyaline cartilage repair and regeneration. In this review, we first summarized the intrinsic property of hyaline cartilage in both maxillofacial and orthopedic regions to establish the requirement for 3D bioprinting cartilage tissue. We then reviewed the literature and provided opinion pieces on the selection of bioprinters, bioink materials, and cell sources. This review aims to identify the current challenges for hyaline cartilage bioprinting and the directions for future clinical development in bioprinted hyaline cartilage.

Use of human acellular dermal matrix in rhinoplasty: a systematic review of the literature and meta-analysis

Alloplastic implants such as acellular dermal matrix (ADM) have been used for various aesthetic and reconstructive purposes since the 1990s. Rhinoplasty addresses both aesthetic and functional nasal impairments, often involving the adoption of grafting materials. Currently, autologous grafts, such as those using septal cartilage, are the gold standard. However, they pose the risk of donor site morbidity, technical challenges, and additional operative time. We review total complications, resorption/re-operation and success rates associated with the use of ADM in rhinoplasty. A literature search was conducted on PubMed, Prospero, DynaMed, DARE, EMBASE and COCHRANE databases. (Registry: CRD42023428019). A total of 462 patients from 15 studies were included, the mean (range) age was 30 (12-65) years, with a female-to-male ratio of 2:1. The most common indications for ADM were for cosmetic (35%, n = 163) and functional rhinoplasty (5%, n = 24). The most common type of ADM used was Alloderm (46%, n = 211). The most common indication for ADM was dorsal nasal augmentation (68%, n = 314). Eleven patients (2%) required revision surgery. The pooled success of ADM in rhinoplasty was 96% (95% CI 94 to 99, p = 0.93; I2 = 0%). 2% of patients developed postoperative complications and no statistically significant difference was seen in complications or success rates when comparing the different types of ADM. ADM in rhinoplasty was associated with fewer complications and re-operation rates, and similar if not less resorption compared to traditional autografts. Therefore, it can be a viable alternative to current autologous grafts in rhinoplasty surgery.

Human nasal cartilage: Functional properties and structure-function relationships for the development of tissue engineering design criteria

Nose reconstruction often requires scarce cartilage grafts. Nasal cartilage properties must be determined to serve as design criteria for engineering grafts. Thus, mechanical and biochemical properties were obtained in multiple locations of human nasal septum, upper lateral cartilage (ULC), and lower lateral cartilage (LLC). Within each region, no statistical differences among locations were detected, but anisotropy at some septum locations was noted. In the LLC, the tensile modulus and ultimate tensile strength (UTS) in the inferior-superior direction were statistically greater than in the anterior-posterior direction. Cartilage from all regions exhibited hyperelasticity in tension, but regions varied in degree of hyalinicity (i.e., Col II:Col I ratio). The septum contained the most collagen II and least collagen I and III, making it more hyaline than the ULC and LLC. The septum had a greater aggregate modulus, UTS, and lower total collagen/wet weight (Col/WW) than the ULC and LLC. The ULC had greater tensile modulus, DNA/WW, and lower glycosaminoglycan/WW than the septum and LLC. The ULC had a greater pyridinoline/Col than the septum. Histological staining suggested the presence of chondrons in all regions. In the ULC and LLC, tensile modulus correlated with total collagen content, while aggregate modulus correlated with pyridinoline content and weakly with pentosidine content. However, future studies should be performed to validate these proposed structure-function relationships. This study of human nasal cartilage provides 1) crucial design criteria for nasal cartilage tissue engineering efforts, 2) quantification of major and minor collagen subtypes and crosslinks, and 3) structure-function relationships. Surprisingly, the large mechanical properties found, particularly in the septum, suggests that nasal cartilage may experience higher-than-expected mechanical loads. STATEMENT OF SIGNIFICANCE: While tissue engineering holds promise to generate much-needed cartilage grafts for nasal reconstruction, little is known about nasal cartilage from an engineering perspective. In this study, the mechanical and biochemical properties of the septum, upper lateral cartilage (ULC), and lower lateral cartilage (LLC) were evaluated using cartilage-specific methods. For the first time in this tissue, all major and minor collagens and collagen crosslinks were measured, demonstrating that the septum was more hyaline than the ULC and LLC. Additionally, new structure-function relationships in the ULC and LLC were identified. This study greatly expands upon the quantitative understanding of human nasal cartilage and provides crucial engineering design criteria for much-needed nasal cartilage tissue engineering efforts.

Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant

Septoplasty is a widely used method in treating deviated septum. Although it is successfully implemented, there are problems with excessive bleeding, septal perforation, or infections. The use of anatomically shaped implants could help overcome these problems. This paper focuses on assessing the possibility of the usage of a nasal septum cartilage implant 3D printed from various market-available filaments. Five different types of laments were used, two of which claim to be suitable for medical use. A combination of modeling, mechanical (bending, compression), structural (FTIR), thermal (DSC, MFR), surface (contact angle), microscopic (optical), degradation (2 M HCl, 5 M NaOH, and 0.01 M PBS), printability, and cell viability (MTT) analyses allowed us to assess the suitability of materials for manufacturing implants. Bioflex had the most applicable properties among the tested materials, but despite the overall good performance, cell viability studies showed toxicity of the material in MTT test. The results of the study show that selected filaments were not suitable for nasal cartilage implants. The poor cell viability of Bioflex could be improved by surface modification. Further research on biocompatible elastic materials for 3D printing is needed either by the synthesis of new materials or by modifying existing ones.

Assessment of a novel patient-specific 3D printed multi-material simulator for endoscopic sinus surgery

Background: Three-dimensional (3D) printing is an emerging tool in the creation of anatomical models for surgical training. Its use in endoscopic sinus surgery (ESS) has been limited because of the difficulty in replicating the anatomical details. Aim: To describe the development of a patient-specific 3D printed multi-material simulator for use in ESS, and to validate it as a training tool among a group of residents and experts in ear-nose-throat (ENT) surgery. Methods: Advanced material jetting 3D printing technology was used to produce both soft tissues and bony structures of the simulator to increase anatomical realism and tactile feedback of the model. A total of 3 ENT residents and 9 ENT specialists were recruited to perform both non-destructive tasks and ESS steps on the model. The anatomical fidelity and the usefulness of the simulator in ESS training were evaluated through specific questionnaires. Results: The tasks were accomplished by 100% of participants and the survey showed overall high scores both for anatomy fidelity and usefulness in training. Dacryocystorhinostomy, medial antrostomy, and turbinectomy were rated as accurately replicable on the simulator by 75% of participants. Positive scores were obtained also for ethmoidectomy and DRAF procedures, while the replication of sphenoidotomy received neutral ratings by half of the participants. Conclusion: This study demonstrates that a 3D printed multi-material model of the sino-nasal anatomy can be generated with a high level of anatomical accuracy and haptic response. This technology has the potential to be useful in surgical training as an alternative or complementary tool to cadaveric dissection.

Properties of the Nasal Cartilage, from Development to Adulthood: A Scoping Review

OBJECTIVE

Nasal septum cartilage is a hyaline cartilage that provides structural support to the nasal cavity and midface. Currently, information on its cellular and mechanical properties is widely dispersed and has often been inferred from studies conducted on other cartilage types such as the knee. A detailed understanding of nasal cartilage properties is important for several biological, clinical, and engineering disciplines. The objectives of this scoping review are to (1) consolidate actual existing knowledge on nasal cartilage properties and (2) identify gaps of knowledge and research questions requiring future investigations.

DESIGN

This scoping review incorporated articles identified using PROSPERO, Cochrane Library (CDSR and Central), WOS BIOSIS, WOS Core Collection, and ProQuest Dissertations and Theses Global databases. Following the screening process, 86 articles were considered. Articles were categorized into three groups: growth, extracellular matrix, and mechanical properties.

RESULTS

Most articles investigated growth properties followed by extracellular matrix and mechanical properties. NSC cartilage is not uniform. Nasal cartilage growth varies with age and location. Similarly, extracellular matrix composition and mechanical properties are location-specific within the NSC. Moreover, most articles included in the review investigate these properties in isolation and only very few articles demonstrate the interrelationship between multiple cartilage properties.

CONCLUSIONS

This scoping review presents a first comprehensive description of research on NSC properties with a focus on NSC growth, extracellular matrix and mechanical properties. It additionally identifies the needs (1) to understand how these various cartilage properties intersect and (2) for more granular, standardized assessment protocols to describe NSC.

Mechanical properties of whole-body soft human tissues: a review

The mechanical properties of soft tissues play a key role in studying human injuries and their mitigation strategies. While such properties are indispensable for computational modelling of biological systems, they serve as important references in loading and failure experiments, and also for the development of tissue simulants. To date, experimental studies have measured the mechanical properties of peripheral tissues (e.g. skin)in-vivoand limited internal tissuesex-vivoin cadavers (e.g. brain and the heart). The lack of knowledge on a majority of human tissues inhibit their study for applications ranging from surgical planning, ballistic testing, implantable medical device development, and the assessment of traumatic injuries. The purpose of this work is to overcome such challenges through an extensive review of the literature reporting the mechanical properties of whole-body soft tissues from head to toe. Specifically, the available linear mechanical properties of all human tissues were compiled. Non-linear biomechanical models were also introduced, and the soft human tissues characterized using such models were summarized. The literature gaps identified from this work will help future biomechanical studies on soft human tissue characterization and the development of accurate medical models for the study and mitigation of injuries.

Will Tissue-Engineering Strategies Bring New Hope for the Reconstruction of Nasal Septal Cartilage?

The nasal septal cartilage plays an important role in the growth of midface and as a vertical strut preventing the collapse of the nasal bones. The repair of nasal cartilage defects remains a major challenge in reconstructive surgery. The tissue engineering strategy in the development of tissue has opened a new perspective to generate functional tissue for transplantation. Given the poor regenerative properties of cartilage and a limited amount of autologous cartilage availability, intense interest has evoked for tissue engineering approaches for cartilage development to provide better outcomes for patients who require nasal septal reconstruction. Despite numerous attempts to substitute the shapely hyaline cartilage in the nasal cartilages, many significant challenges remained unanswered. The aim of this research was to carry out a critical review of the literature on research work carried out on the development of septal cartilage using a tissue engineering approach, concerning different cell sources, scaffolds and growth factors, as well as its clinical pathway and trials have already been carried out.

Evaluation of human nasal cartilage nonlinear and rate dependent mechanical properties

Nasal reconstruction frequently requires donor cartilage and tissue, and ideally, donor tissue will closely emulate native nasal cartilage mechanics. Tissue engineering scaffolds, especially 3D printed scaffolds, have been proposed for nasal reconstruction, and the success of these constructs may depend on how well scaffolds reflect native nasal cartilage mechanical properties. Therefore, consistent and comprehensive characterization of native nasal cartilage mechanical properties is a foundation for nasal cartilage tissue engineering and reconstruction in general by providing design targets for reconstructive materials. Our group has previously shown the feasibility of producing scaffolds with porous architecture permitting chondrocyte growth and cartilage production. In this study, we determined the nonlinear and stress relaxation behavior of human nasal cartilage under unconfined compression. We then fit this experimental data to nonlinear elastic, nonlinear viscoelastic and nonlinear biphasic constitutive models. The resulting coefficients will provide design targets for nasal reconstruction and scaffold design as well as outcome measures for assessment of tissue engineered nasal cartilage.

Beyond the L-Strut: Redefining the Biomechanics of Rhinoplasty Using Topographic Optimization Modeling

Rhinoplasty utilizes cartilage harvested from the nasal septum as autologous graft material. Traditional dogma espouses preservation of the "L-strut" of dorsal and caudal septum, which is less resistant to axial loading than virgin septum. Considering the 90° angle between dorsal and caudal limbs, the traditional L-strut also suffers from localized increases in internal stresses leading to premature septal "cracking," structural-scale deformation, or both. Deformation and failure of the L-strut leads to nasal deviation, saddle deformity, loss of tip support, or restriction of the nasal valve. The balance between cartilage yield and structural integrity is a topographical optimization problem. Guided by finite element (FE) modelling, recent efforts have yielded important modifications including the chamfering of right-angled corners to reduce stress concentrations and the preservation of a minimum width along the inferior portion of the caudal strut. However, all existing FE studies offer simplified assumptions to make the construct easier to model. This review article highlights advances in our understanding of septal engineering and identifies areas that require more work to further refine the balance between the competing interests of graft acquisition and the maintenance of nasal structural integrity.

Morphological and biomechanical characterization of immature and mature nasoseptal cartilage

Nasoseptal cartilage has been assumed to be isotropic, unlike the well-defined zonal organization of articular cartilage attributed to postnatal biomechanical loading. We know from clinical experience that malrotation of surgical nasoseptal cartilage grafts can lead to increased graft absorption. Other studies have also suggested directionally dependent compressive stiffness suggesting anisotropy, but morphological investigations are lacking. This study characterizes immature and mature native bovine nasoseptal cartilage using a combination of immunohistochemistry, biomechanical testing and structural imaging. Our findings indicate that there is extensive postnatal synthesis and reorganization of the extracellular matrix in bovine nasoseptal cartilage, independent of joint loading forces responsible for articular cartilage anisotropy. Immature nasoseptal cartilage is more cellular and homogenous compared to the zonal organization of cells and extracellular matrix of mature cartilage. Mature samples also exhibited greater glycosaminoglycan content and type II collagen fibre alignment compared to immature cartilage and this correlates with greater compressive stiffness. Engineered neocartilage often consists of immature, isotropic, homogenous tissue that is unable to meet the functional and mechanical demands when implanted into the native environment. This study demonstrates the importance of anisotropy on biomechanical tissue strength to guide future cartilage tissue engineering strategies for surgical reconstruction.

Toward tissue-engineering of nasal cartilages

Nasal cartilage pathologies are common; for example, up to 80% of people are afflicted by deviated nasal septum conditions. Because cartilage provides the supportive framework of the nose, afflicted patients suffer low quality of life. To correct pathologies, graft cartilage is often required. Grafts are currently sourced from the patient's septum, ear, or rib. However, their use yields donor site morbidity and is limited by tissue quantity and quality. Additionally, rhinoplasty revision rates exceed 15%, exacerbating the shortage of graft cartilage. Alternative grafts, such as irradiated allogeneic rib cartilage, are associated with complications. Tissue-engineered neocartilage holds promise to address the limitations of current grafts. The engineering design process may be used to create suitable graft tissues. This process begins by identifying the surgeon's needs. Second, nasal cartilages' properties must be understood to define engineering design criteria. Limited investigations have examined nasal cartilage properties; numerous additional studies need to be performed to examine topographical variations, for example. Third, tissue-engineering processes must be applied to achieve the engineering design criteria. Within the recent past, strategies have frequently utilized human septal chondrocytes. As autologous and allogeneic rib graft cartilage is used, its suitability as a cell source should also be examined. Fourth, quantitative verification of engineered neocartilage is critical to check for successful achievement of the engineering design criteria. Finally, following the FDA paradigm, engineered neocartilage must be orthotopically validated in animals. Together, these steps delineate a path to engineer functional nasal neocartilages that may, ultimately, be used to treat human patients. STATEMENT OF SIGNIFICANCE: Nasal cartilage pathologies are common and lead to greatly diminished quality of life. The ability to correct pathologies is limited by cartilage graft quality and quantity, as well as donor site morbidity and surgical complications, such as infection and resorption. Despite the significance of nasal cartilage pathologies and high rhinoplasty revision rates (15%), little characterization and tissue-engineering work has been performed compared to other cartilages, such as articular cartilage. Furthermore, most work is published in clinical journals, with little in biomedical engineering. Therefore, this review discusses what nasal cartilage properties are known, summarizes the current state of nasal cartilage tissue-engineering, and makes recommendations via the engineering design process toward engineering functional nasal neocartilage to address current limitations.

Fibrin-Genipin Hydrogel for Cartilage Tissue Engineering in Nasal Reconstruction

OBJECTIVES

Nasal reconstruction is limited by the availability of autologous cartilage. The aim is to investigate an adhesive biomaterial for tissue engineering of nasal cartilage by evaluating mechanical properties of hydrogels made of fibrin crosslinked with genipin as compared to native tissue.

METHODS

Hydrogels of fibrin, fibrin-genipin, and fibrin-genipin with extracellular matrix (ECM) particles were created and evaluated with mechanical testing to determine compression, tensile, and shear properties. Rabbit nasal septal cartilage was harvested and tested in these modalities for comparison. Transmission electron microscopy characterized hydrogel structure.

RESULTS

Fibrin-genipin gels had higher compressive, tensile, and shear moduli compared to fibrin alone or fibrin-genipin with ECM. However, all hydrogel formulations had lower moduli than the rabbit nasal septal cartilage. Electron microscopy showed genipin crosslinking increased structural density of the hydrogel and that cartilage ECM created larger structural features with lower crosslinking density.

CONCLUSION

The addition of genipin significantly improved mechanical properties of fibrin hydrogels by increasing the compressive, tensile, and shear moduli. The addition of cartilage ECM, which can add native structure and composition, resulted in decreased moduli values. Fibrin-genipin is a bioactive and biomechanically stable hydrogel that may offer promise as a scaffold for cartilage tissue engineering in nasal reconstruction, yet further augmentation is required to match material properties of native nasal cartilage.

The impact of surgical manipulation on lower lateral cartilage stiffness

BACKGROUND

Cephalic trimming of the alar (or lower lateral) cartilage may cause weakening leading to external nasal valve collapse. Numerous methods have been proposed to combat this weakening in order to maintain lateral crural stiffness. The purpose of this study was to quantify the effect of mucosal stripping, cephalic trimming, cephalic turn-in flap, and lateral crural strut grafting on lateral crural stiffness.

METHODS

In situ cyclic compressive loading was performed on eight lateral crura in 4 fresh frozen cadaveric specimens. Testing was performed on the unaltered degloved cartilage (intact) and following each of the following interventions: mucosal stripping, cephalic turn-in flap, cephalic trimming, and lateral crural strut grafting. Linear regression of the generated force-displacement curves was used to calculate stiffness. Each intervention was compared to the intact cartilage.

RESULTS

Alar cartilage of all of the specimens demonstrated a linear response to compressive loading. Intact cartilage had a mean stiffness of 3.53 N/mm. Mucosal stripping and cephalic turn-in flaps yielded similar stiffness values to intact cartilage. Cephalic trimming reduced stiffness in all cases by a mean of 1.09 N/mm (p = 0.003). Lateral crural strut grafting significantly increased stiffness by a mean of 3.67 N/mm (p = 0.0001).

CONCLUSIONS

Cephalic trimming leads to decreased lateral crural stiffness in cadaveric specimens. Cephalic turn-in flaps restore pre-trimmed stiffness, and lateral crural strut grafting increases overall stiffness of the cartilage. These findings should be considered in patients undergoing rhinoplasty, particularly if there are concerns regarding potential external valve collapse.

Structural and Mechanical Comparison of Human Ear, Alar, and Septal Cartilage

Supplemental Digital Content is available in the text.

Background:

In the human ear and nose, cartilage plays a key role in establishing its form and function. Interestingly, there is a noticeable paucity on biochemical, structural, and mechanical studies focused on facial cartilage. Such studies are needed to provide elementary knowledge that is fundamental to tissue engineering of cartilage. Therefore, in this study, a comparison is made of the biochemical, structural, and mechanical differences between ear, ala nasi, and septum on the extracellular matrix (ECM) level.

Methods:

Cartilage samples were harvested from 10 cadaveric donors. Each sample was indented 10 times with a nanoindenter to determine the effective Young’s modulus. Structural information of the cartilage was obtained by multiple-photon laser scanning microscopy capable of revealing matrix components at subcellular resolution. Biochemistry was performed to measure glycosaminoglycan (GAG), DNA, elastin, and collagen content.

Results:

Significant differences were seen in stiffness between ear and septal cartilage (P = 0.011) and between ala nasi and septal cartilage (P = 0.005). Elastin content was significantly higher in ear cartilage. Per cartilage subtype, effective Young’s modulus was not significantly correlated with cell density, GAG, or collagen content. However, in septal cartilage, low elastin content was associated with higher stiffness. Laser microscopy showed a distinct difference between ear cartilage and cartilage of nasal origin.

Conclusion:

Proposed methods to investigate cartilage on the ECM level provided good results. Significant differences were seen not only between ear and nasal cartilage but also between the ala nasi and septal cartilage. Albeit its structural similarity to septal cartilage, the ala nasi has a matrix stiffness comparable to ear cartilage.

Cartilage engineering in reconstructive surgery: auricular, nasal and tracheal engineering from a surgical perspective

This review provides an update on cartilage tissue engineering with particular focus on the head and neck. It is aimed at scientists and clinicians who are interested in tissue engineering and its clinical applicability. Principal tissue engineering strategies are summarized in the first part of this review. In the second part, current clinical approaches to auricular, nasal and tracheal reconstruction are discussed from a surgical perspective. By this approach, the requirements for clinical applicability are outlined and new insight into relevant aims of research is given to accelerate the transfer from bench to bedside.

Estimation of Nasal Tip Support Using Computer-Aided Design and 3-Dimensional Printed Models

IMPORTANCE

Palpation of the nasal tip is an essential component of the preoperative rhinoplasty examination. Measuring tip support is challenging, and the forces that correspond to ideal tip support are unknown.

OBJECTIVE

To identify the integrated reaction force and the minimum and ideal mechanical properties associated with nasal tip support.

DESIGN, SETTING, AND PARTICIPANTS

Three-dimensional (3-D) printed anatomic silicone nasal models were created using a computed tomographic scan and computer-aided design software. From this model, 3-D printing and casting methods were used to create 5 anatomically correct nasal models of varying constitutive Young moduli (0.042, 0.086, 0.098, 0.252, and 0.302 MPa) from silicone. Thirty rhinoplasty surgeons who attended a regional rhinoplasty course evaluated the reaction force (nasal tip recoil) of each model by palpation and selected the model that satisfied their requirements for minimum and ideal tip support. Data were collected from May 3 to 4, 2014.

RESULTS

Of the 30 respondents, 4 surgeons had been in practice for 1 to 5 years; 9 surgeons, 6 to 15 years; 7 surgeons, 16 to 25 years; and 10 surgeons, 26 or more years. Seventeen surgeons considered themselves in the advanced to expert skill competency levels. Logistic regression estimated the minimum threshold for the Young moduli for adequate and ideal tip support to be 0.096 and 0.154 MPa, respectively. Logistic regression estimated the thresholds for the reaction force associated with the absolute minimum and ideal requirements for good tip recoil to be 0.26 to 4.74 N and 0.37 to 7.19 N during 1- to 8-mm displacement, respectively.

CONCLUSIONS AND RELEVANCE

This study presents a method to estimate clinically relevant nasal tip reaction forces, which serve as a proxy for nasal tip support. This information will become increasingly important in computational modeling of nasal tip mechanics and ultimately will enhance surgical planning for rhinoplasty.

LEVEL OF EVIDENCE

NA.

A Model to Estimate L-Strut Strength With an Emphasis on Thickness

IMPORTANCE

To perform and teach septorhinoplasty, one must have a principled understanding of the mechanics of the nasal septum. The thickness of the L-strut and how it changes septal strength have not been adequately quantified, yet calculating septal strength based on changes to thickness and size is vital in maintaining lasting nasal strength and integrity.

OBJECTIVE

To establish standards for the nasal septal cartilage thickness, dorsal and caudal septum length, and Young's modulus. To provide a basis for quantitative, operative decision making, a mathematical model of L-strut strength is presented based on changes in thickness and width.

DESIGN, SETTING, AND PARTICIPANTS

Nasal septal cartilages from 30 fresh cadavers were used to measure thickness at clinically relevant points and length of dorsal and caudal L-strut arms. The Young modulus was directly measured using a force gauge. Statistical analyses were performed to compare thicknesses in anatomically relevant areas. Using a cantilevered beam construct, the spring constant of the L-strut dorsal and caudal arms were estimated individually with width and thickness as variables.

MAIN OUTCOMES AND MEASURES

Thickness, dorsal and caudal length, and the Young modulus of nasal septal cartilage. Spring constants of dorsal and caudal L-strut arms with different combinations of thickness and width.

RESULTS

The mean (SD) age at death of the 30 cadavers was 79.2 (13.6) years (range 50-97 years). Of these, 17 (57%) were male, and 13 (43%) were female. The mean (SD) nasal septal cartilage thickness in the 30 cadavers was 1.45 (0.54) mm. Mean (SD) thickness of points along the 2-mm L-strut line was 1.49 (0.56) mm and was significantly thicker than points along the 5-mm L-strut line (mean [SD] thickness, 1.29 [0.52] mm) but significantly thinner than points along the 15-mm L-strut line (mean [SD] thickness, 1.68 [0.53]). Mean (SD) thicknesses of the posterior dorsal and caudal cartilage points were 1.52 (0.45) mm and 1.71 (0.69) mm and were significantly thicker than the anterior dorsal and caudal points (mean [SD] thickness, 1.28 [0.42] mm and 1.31 [0.44] mm, respectively). Mean (SD) dorsal and caudal L-strut arm lengths were 21.9 (3.7) mm and 20.9 (3.5) mm, respectively. The mean (SD) Young modulus was 2.03 (1.3) MPa. A model was generated demonstrating the thickness required to maintain a desired strength at a given dorsal or caudal arm width.

CONCLUSIONS AND RELEVANCE

Although thickness was not uniform throughout the nasal septum, there is a predictable pattern. Thickness of the L-strut contributes more to septal strength than does L-strut width. The model generated in this study can be used in planning, performing, or teaching the applied mechanics of septorhinoplasty.

LEVEL OF EVIDENCE

NA.

Effect of hyaluronidase on tissue-engineered human septal cartilage

OBJECTIVES

Structural properties of tissue-engineered cartilage can be optimized by altering its collagen to sulfated glycosaminoglycan (sGAG) ratio with hyaluronidase. The objective was to determine if treatment of neocartilage constructs with hyaluronidase leads to increased collagen:sGAG ratios, as seen in native tissue, and improved tensile properties.

STUDY DESIGN

Prospective, basic science.

METHODS

Engineered human septal cartilage from 12 patients was treated with hyaluronidase prior to culture. Control and treated constructs were analyzed at 3, 6, or 9 weeks for their biochemical, biomechanical, and histological properties.

RESULTS

Levels of sGAG were significantly reduced in treated constructs when compared with control constructs at 3, 6, and 9 weeks. Treated constructs had higher collagen:sGAG ratios when compared with control constructs at 3, 6, and 9 weeks. Treated constructs had greater tensile strength, strain at failure, and increased stiffness as measured by the equilibrium and ramp tensile moduli when compared with the untreated control constructs. Continued time in culture improved tensile strength in both treated and control constructs.

CONCLUSION

Hyaluronidase treatment of engineered septal cartilage decreased total sGAG content without inhibiting expansive growth of the constructs. Decreased sGAG in treated constructs resulted in increased collagen to sGAG ratios and was associated with an increase in tensile strength and stiffness. With additional culture time, sGAG increased modestly in depleted constructs, and some initial gains in tensile properties were dampened. Alterations in the dosage of hyalurondiase during neocartilage fabrication can create constructs that have improved biomechanical properties for eventual surgical implantation.

LEVEL OF EVIDENCE

NA. Laryngoscope, 126:1984-1989, 2016.

Redefining the Septal L-Strut to Prevent Collapse

During septorhinoplasty, septal cartilage is frequently resected for various purposes but the L-strut is preserved. Numerous materials are inserted into the nasal dorsum during dorsal augmenation rhinoplasty without considering nasal structural safety. This study used a finite element method (FEM) to redefine the septal L-strut, to prevent collapse as pressure moved from the rhinion to the supratip breakpoint on the nasal dorsum and as the contact percentage between the caudal L-strut and the maxillary crest changed. We designed a 1-cm-wide L-strut model based on computed tomography data. At least 45% of the width of the L-strut in the inferior portion of the caudal strut must be preserved during septoplasty to stabilize the septum. In augmentation rhinoplasty, the caudal L-strut must either be preserved perfectly or reinforced to prevent collapse or distortion of the L-strut. The dorsal augmentation material must be fixed in an augmentation pocket to prevent movement of graft material toward the supratip breakpoint, which can disrupt the L-strut. We conducted a numerical analysis using a FEM to predict tissue/organ behavior and to help clinicians understand the reasons for target tissue/organ collapse and deformation.

Model to Estimate Threshold Mechanical Stability of Lower Lateral Cartilage

IMPORTANCE

In rhinoplasty, techniques used to alter the shape of the nasal tip often compromise the structural stability of the cartilage framework in the nose. Determining the minimum threshold level of cartilage stiffness required to maintain long-term structural stability is a critical aspect in performing these surgical maneuvers.

OBJECTIVE

To quantify the minimum threshold mechanical stability (elastic modulus) of lower lateral cartilage (LLC) according to expert opinion.

METHODS

Five anatomically correct LLC phantoms were made from urethane via a 3-dimensional computer modeling and injection molding process. All 5 had identical geometry but varied in stiffness along the intermediate crural region (0.63-30.6 MPa).

DESIGN, SETTING, AND PARTICIPANTS

A focus group of experienced rhinoplasty surgeons (n = 33) was surveyed at a regional professional meeting on October 25, 2013. Each survey participant was presented the 5 phantoms in a random order and asked to arrange the phantoms in order of increasing stiffness based on their sense of touch. Then, they were asked to select a single phantom out of the set that they believed to have the minimum acceptable mechanical stability for LLC to maintain proper form and function.

MAIN OUTCOMES AND MEASURES

A binary logistic regression was performed to calculate the probability of mechanical acceptability as a function of the elastic modulus of the LLC based on survey data. A Hosmer-Lemeshow test was performed to measure the goodness of fit between the logistic regression and survey data. The minimum threshold mechanical stability for LLC was taken at a 50% acceptability rating.

RESULTS

Phantom 4 was selected most frequently by the participants as having the minimum acceptable stiffness for LLC intermediate care. The minimum threshold mechanical stability for LLC was determined to be 3.65 MPa. The Hosmer-Lemeshow test revealed good fit between the logistic regression and survey data (χ23 = 0.92, P = .82).

CONCLUSIONS AND RELEVANCE

This study presents a novel method of modeling anatomical structures and quantifying the mechanical properties of nasal cartilage. Quantifying these parameters is an important step in guiding surgical maneuvers performed in rhinoplasty.

LEVEL OF EVIDENCE

5.

Biomechanical characterisation of the human nasal cartilages; implications for tissue engineering

Nasal reconstruction is currently performed using autologous grafts provides but is limited by donor site morbidity, tissue availability and potentially graft failure. Additionally, current alternative alloplastic materials are limited by their high extrusion and infection rates. Matching mechanical properties of synthetic materials to the native tissue they are replacing has shown to be important in the biocompatibility of implants. To date the mechanical properties of the human nasal cartilages has not been studied in depth to be able to create tissue-engineered replacements with similar mechanical properties to native tissue. The young's modulus was characterized in compression on fresh-frozen human cadaveric septal, alar, and lateral cartilage. Due to the functional differences experienced by the various aspects of the septal cartilage, 16 regions were evaluated with an average elastic modulus of 2.72 ± 0.63 MPa. Furthermore, the posterior septum was found to be significantly stiffer than the anterior septum (p < 0.01). The medial and lateral alar cartilages were tested at four points with an elastic modulus ranging from 2.09 ± 0.81 MPa, with no significant difference between the cartilages (p < 0.78). The lateral cartilage was tested once in all cadavers with an average elastic modulus of 0.98 ± 0.29 MPa. In conclusion, this study provides new information on the compressive mechanical properties of the human nasal cartilage, allowing surgeons to have a better understanding of the difference between the mechanical properties of the individual nasal cartilages. This study has provided a reference, by which tissue-engineered should be developed for effective cartilage replacements for nasal reconstruction.

Tissue-engineered cartilage for facial plastic surgery

PURPOSE OF REVIEW

The reconstruction of cartilaginous craniofacial defects is ideally performed with analogous grafting material, such as autologous tissue. However, the use of autologous cartilage is limited by its finite availability and potentially suboptimal geometry to repair specific defects. Tissue engineering of human cartilage may provide the adequate supply of grafting and implant material for the reconstruction of cartilaginous facial defects. An update of the various cartilage tissue engineering methodologies is provided in this review.

RECENT FINDINGS

The cartilage tissue engineering paradigm begins with the harvest of a small septal cartilage donor specimen. This is followed by the isolation and subsequent proliferation of chondrocytes and the seeding of these cells onto three-dimensional scaffolds. Neocartilage is created as pericellular substrate, is produced by the cells and deposited throughout the scaffold. Theoretically, the mature cartilage construct can be introduced back into the same patient for reconstruction of craniofacial defects. Initial steps of the cartilage tissue engineering protocol have been standardized; however, modifications of subsequent steps have shown the potential to profoundly impact tissue composition and strength, bringing the properties of cartilage constructs closer to those of native human septum.

SUMMARY

The ability to engineer virtually limitless quantities of autologous cartilage could have a profound impact on facial plastic and reconstructive surgery. The strategies used to refine human cartilage culture techniques have successfully produced neocartilage constructs with biochemical and biomechanical properties approaching those of native septal tissue. With the steady progress achieved in recent years, there is great capacity for the proximate realization of surgically implantable tissue-engineered cartilage constructs.

Redefining the septal L-strut in septal surgery

In septal surgery, the surgeon preserves the L-strut, the portion anterior to a vertical line drawn from the rhinion to the anterior nasal spine (ANS) and at least a 1-cm width of the dorsal and caudal septal segment, to decrease the potential for loss of the tip and dorsal nasal support. However, nasal tip collapse and saddle deformities occur occasionally. We utilized a mechanical approach to determine the safe width size for the L-strut in contact with the maxillary crest. Five L-strut models were designed based on computed tomography data (80 patients) and previous studies (55 patients). All L-strut models connected the perpendicular plate of the ethmoid bone (PPE) and the maxillary crest and were assumed to be fixed to the PPE and maxillary crest. An approximated daily load was applied to the dorsal portion of the L-strut. Finite element analyses were performed to compare the stress, strain, and displacement distribution of all L-strut models. According to the differences in the contact area between the caudal L-strut and maxillary crest, there are significant differences in terms of the stress, strain, and displacement distribution in the L-strut. High stresses occurred at the inner corner of the L-strut when 60 - 100% of the strut was in contact with the maxillary crest. High stresses also occurred at the inferior portion of the caudal L-strut when 20 - 40% of the caudal strut was in contact with maxillary crest. We conclude that it is important to preserve the 1-cm width L-strut caudal segment, which corresponds to the portion posterior to a vertical line drawn from the rhinion to the ANS. In particular, we must maintain more than 40% of the contact area between the L-strut and the maxillary crest when the septal cartilage in the caudal portion of the L-strut is harvested.

Regenerative medicine and nasal surgery

Nasal surgery is a constellation of operations that are intended to restore form and function to the nose. The amount of augmentation required for a given case is a delicate interplay between patient aesthetic desires and corrective measures taken for optimal nasal airflow. Traditional surgical techniques make use of autologous donor tissue or implanted alloplastic materials to restore nasal deficits. Limited availability of donor tissue and associated harvest site morbidity have pushed surgeons and researchers to investigate methods to bioengineer nasal tissues. For this article, we conducted a review of the literature on regenerative medicine as it pertains to nasal surgery. PubMed was searched for articles dating from January 1, 1994, through August 1, 2014. Journal articles with a focus on regenerative medicine and nasal tissue engineering are included in this review. Our search found that the greatest advancements have been in the fields of mucosal and cartilage regeneration, with a growing body of literature to attest to its promise. With recent advances in bioscaffold fabrication, bioengineered cartilage quality, and mucosal regeneration, the transition from comparative animal models to more expansive human studies is imminent. Each of these advancements has exciting implications for treating patients with increased efficacy, safety, and satisfaction.

Compressive and tensile mechanical properties of the porcine nasal septum

The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2-10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.

Shape fidelity of native and engineered human nasal septal cartilage

OBJECTIVE

To test engineered and native septal cartilage for resistance to deformation and remodeling under sustained bending loads and to determine the effect of bending loads on the biochemical properties of constructs.

STUDY DESIGN

Prospective, basic science.

SETTING

Laboratory.

SUBJECTS AND METHODS

Human septal chondrocytes from 6 donors were used to create 12-mm constructs. These were cultured for 10 weeks and subjected to bending for 6 days. Free-swelling controls and native tissue from 6 donors were used for comparison. Shape retention, photo documentation, live-dead staining, and biochemical properties were measured.

RESULTS

Live-dead staining showed no difference in cell survival between loaded constructs and free-swelling controls. The immediate shape retention of the constructs was 39.0% versus 24.4% for native tissue (P = .13). After 2 and 24 hours of relaxation, the constructs possessed similar shape retention to native tissue (26.9% and 16.4%; P = .126; 21.7% and 14.4%; P = .153). There was no significant change in construct shape retention from immediately after release to 2 hours of relaxation (39.0% and 26.9%, respectively; P = .238). In addition, the retention did not change significantly between 2 and 24 hours of relaxation (26.9% and 21.7%; P = .48). There was no significant difference in biochemical properties between loaded constructs and controls.

CONCLUSION

The shape retention properties of human septal neocartilage constructs are comparable to human native septal cartilage. In addition, mechanical loading of neocartilage constructs does not adversely affect cell viability or biochemical properties. This study demonstrates that neocartilage constructs possess adequate shape fidelity for use as septal cartilage graft material.

Flexural properties of native and tissue-engineered human septal cartilage

OBJECTIVE

To determine and compare the bending moduli of native and engineered human septal cartilage.

STUDY DESIGN

Prospective, basic science.

SETTING

Research laboratory.

SUBJECTS AND METHODS

Neocartilage constructs were fabricated from expanded human septal chondrocytes cultured in differentiation medium for 10 weeks. Constructs (n = 10) and native septal cartilage (n = 5) were tested in a 3-point bending apparatus, and the bending moduli were calculated using Euler-Bernoulli beam theory.

RESULTS

All samples were tested successfully and returned to their initial shape after unloading. The bending modulus of engineered constructs (0.32 ± 0.25 MPa, mean ± SD) was 16% of that of native septal cartilage (1.97 ± 1.25 MPa).

CONCLUSION

Human septal constructs, fabricated from cultured human septal chondrocytes, are more compliant in bending than native human septal tissue. The bending modulus of engineered septal cartilage can be measured, and this modulus provides a useful measure of construct rigidity while undergoing maturation relative to native tissue.

In vivo implantation of tissue-engineered human nasal septal neocartilage constructs: a pilot study

OBJECTIVE

To determine the in vivo biocompatibility of septal neocartilage constructs developed in vitro by an alginate intermediate step.

STUDY DESIGN

Prospective, animal model.

SETTING

Research laboratory.

SUBJECTS AND METHODS

A murine model was used to examine the maturation of neocartilage constructs in vivo. Chondrocytes collected from patients undergoing septoplasty were expanded in monolayer and suspended in alginate beads for 3-dimensional culture in media containing human serum and growth factors. After in vitro incubation for 5 weeks, the constructs were implanted in the dorsum of athymic mice for 30 and 60 days (n = 9). After the mice were sacrificed, the constructs were recovered for assessment of their morphological, histochemical, biochemical, and biomechanical properties.

RESULTS

The mice survived and tolerated the implants well. Infection and extrusion were not observed. Neocartilage constructs maintained their general shape and size and demonstrated cell viability after implantation. The implanted constructs were firm and opaque, sharing closer semblance to native septal tissue relative to the gelatinous, translucent preimplant constructs. Histochemical staining with hematoxylin and eosin (H&E) revealed that the constructs exhibited distinct morphologies characteristic of native tissue, which were not observed in preimplant constructs. DNA and type II collagen increased with duration of implantation, whereas type I collagen and glycoaminoglycans (GAG) decreased. Mechanical testing of a 60-day implanted construct demonstrated characteristics similar to native human septal cartilage.

CONCLUSIONS

Neocartilage constructs are viable in an in vivo murine model. The histologic, biochemical, and biomechanical features of implanted constructs closely resemble native septal tissue when compared with preimplant constructs.

Biomechanics of the deformity of septal L-Struts

OBJECTIVES/HYPOTHESIS

A septal L-strut is often preserved or created during septoplasty. The main intention is to provide structural stability and to straighten the nasal septum. Deformity or excessive deformation of the L-strut might cause functional or aesthetic complications. The objectives were to examine the effects of material properties, the boundary conditions, the nasal tip support, and the geometry of the L-struts on the deformity of septal L-struts.

STUDY DESIGN

Computer-aided modeling was used to create a spring-supported nasal tip and free nasal tip L strut septal cartilage models upon which simulation was performed to analyse the deformation patterns.

METHODS

A five-sided septum model was first created from the computed tomography scan of a human subject. Several models with various combinations of wider or narrower dorsal struts as well as arc of cartilage were then constructed from this septum model. The edges connected to bony supports were assumed to be fixed, and the nasal tip was assumed to be spring supported. Finite element analyses were carried out to determine the deformation and stress distribution in the septal strut for different combinations of material properties and nasal tip spring support.

RESULTS

The spring-supported nasal tip model provides a more accurate representation of the boundary conditions in the nose. In both the free and spring-supported nasal tips-the BC junction and the nasal spine are found to be the consistent points of maximum stress regardless of material properties. The preservation of an arc of cartilage and a wider dorsal strut increase the stability of the structure.

CONCLUSIONS

The introduction of a spring-supported nasal tip model provided a more accurate representation of the boundary conditions in the nose. The bony-cartilaginous junction and the nasal spine were found to be the consistent points of maximum stress, regardless of material properties. The preservation of an arc of cartilage and a wider dorsal strut increased the stability of the structure.

Defining nasal cartilage elasticity: biomechanical testing of the tripod theory based on a cantilevered model

OBJECTIVE

To define the modulus of elasticity for nasal septum, auricular, upper lateral, and lower lateral cartilages.

METHODS

Prospective enrollment of sequential patients undergoing septorhinoplasty. Test samples were obtained through routine surgical interventions using atraumatic harvesting techniques. The modulus of elasticity was determined using a customized biomechanical testing device. A clinical analysis of nasal tip strength and "ethnic" nasal categorization was performed.

RESULTS

Five sequential patients were enrolled; 4 underwent biomechanical testing of harvested cartilage. All 4 patients were classified as having a leptor-rhine nasal architecture. The modulus of elasticity for the lower lateral cartilages was 1.82 to 15.28 MPa. Values for auricular, nasal septum, and upper lateral cartilages (medial and caudal) were also determined.

CONCLUSIONS

This is the first biomechanical study performed on human auricular, lower lateral, and upper lateral cartilages. The elastic modulus can be determined from samples obtained during routine septorhinoplasty. The modulus of elasticity for all areas was significantly higher than values previously demonstrated for bioengineered elastic cartilage and carved human nasal septal specimens. Shaving the lateral portions of the nasal septum may significantly reduce tensile strength, which may affect graft performance in vivo. Further refinement of testing methods and an increase in the number of analyzed samples are required for formal statistical analysis and further determination of clinical relevance in different nasal subtypes.

Compressive biomechanical properties of human nasal septal cartilage

BACKGROUND

Nasal septal cartilage is frequently used in nasal reconstruction and is a common source of chondrocytes for cartilage tissue engineering. The biomechanical properties of septal cartilage have yet to be fully defined and this limits the ability to compare it to the various alternative tissue-implant materials or tissue-engineered neocartilage. Given the unique structure and orientation of the septum within the nose, we sought to investigate anisotropic behaviors of septal cartilage in compression and correlate this to the concentration of glycosaminoglycans (GAG) and collagen within the cartilage.

METHODS

Human nasal septal cartilage specimens were tested in confined compression, with each sample analyzed in a medial orientation and also either a vertical or caudal-cephalic orientation, with the order of tests randomized. The equilibrium confined compression (aggregate) modulus, HAO, and the permeability, kp, at different offset compression levels were obtained for each compression test. After testing, the cartilage samples were solubilized, and the concentrations of GAG and collagen were obtained.

RESULTS

Forty-nine compression tests (24 medial, 12 vertical, 13 caudal-cephalic) were run on cartilage specimens obtained from 21 patients. There was a significant effect of orientation on compression modulus, HAO, with the vertical (0.7 +/- 0.12 MPa) and caudal-cephalic (0.66 +/- 0.01 MPa) orientations being significantly stiffer (p = 0.05) than the medial orientation (0.44 +/- 0.04 MPa). There was a trend of an orientation effect on kp at 15% offset compression (p = 0.12) and a borderline significant effect of orientation on kp at 30% offset compression (p = 0.05), demonstrating the M orientation to be more permeable than both the vertical and caudal-cephalic orientations. Both univariate and multivariate analysis did not demonstrate a significant effect of order of compression, age, gender, thickness, dry/wet weight, GAG, or collagen on either HAO, or kp values (p > 0.05).

CONCLUSION

This study provides new information on the compressive properties of septal cartilage along different axes of compression. The results demonstrate that human septal cartilage is anisotropic; the compressive stiffness is higher in the vertical and caudal-cephalic orientations than in the medial orientation. Additionally, the medial orientation tends to have the greatest permeability. The data obtained in this study provide a reference to which various craniofacial reconstruction materials and tissue-engineered neocartilage can be compared.

Cartilage regeneration in the rabbit nasal septum

OBJECTIVE

Rhinoplasty frequently includes harvesting of nasal septal cartilage. The objective of this prospective basic investigation is to determine whether cartilage can regenerate after submucosal resection (SMR) of the nasal septum in the rabbit. Neocartilage formation has not heretofore been described in this model.

METHODS

By lateral rhinotomy, SMR was performed on 17 rabbits followed by reapproximation of the perichondrium. After 7 months, septi were fixed, sectioned, and examined histologically. Findings were photographed and data tabulated according to location and extent.

RESULTS

Sites of matrix-secreting isogenous chondrocyte islands were identified between the perichondrial flaps of every animal, principally in the anterior inferior septum. The width of the islands averaged 190 microm, and the mean neocartilage height was found to be 840 microm. The newly formed cartilage consisted of chondrocytes within chondrons and was comparable in shape and structure to native septal cartilage.

CONCLUSIONS

After SMR, rabbit cartilage tissue can regenerate and form matrix within the potential space created by surgery. The surrounding stem cell-rich perichondrium may be the site of origin for these chondrocytes. These findings suggest that after SMR of the human nasal septum, it may be possible for new cartilage tissue to develop provided the mucosa is well approximated. This biologic effect may be enhanced by insertion of cytokine-rich tissue scaffolds that exploit the native ability of septal perichondrium to regenerate and repair cartilage tissue.