What the pulmonary specialist should know about the new inhalation therapies

Administration of airborne pathogens in non-human primates

PURPOSE

Airborne pathogen scan penetrate in human respiratory tract and can cause illness. The use of animal models to predict aerosol deposition and study respiratory disease pathophysiology is therefore important for research and a prerequisite to test and study the mechanism of action of treatment. NHPs are relevant animal species for inhalation studies because of their similarities with humans in terms of anatomical structure, respiratory parameters and immune system.

MATERIALS AND METHODS

The aim of this review is to provide an overview of the state of the art of pathogen aerosol studies performed in non-human primates (NHPs). Herein, we present and discuss the deposition of aerosolized bacteria and viruses. In this review, we present important advantages of using NHPs as model for inhalation studies.

RESULTS

We demonstrate that deposition in the respiratory tract is not only a function of aerosol size but also the technique of administration influences the biological activity and site of aerosol deposition. Finally, we observe an influence of a region of pathogen deposition in the respiratory tract on the development of the pathophysiological effect in NHPs.

CONCLUSION

The wide range of methods used for the delivery of pathogento NHP respiratory airways is associated with varying doses and deposition profiles in the airways.

Inhaled corticosteroid delivery is markedly affected by breathing pattern and valved holding chamber model

BACKGROUND

There is a scarcity of high-quality research on the efficient delivery of inhaled corticosteroids using valved holding chambers (VHCs) in children.

METHODS

The delivered dose (DD) of fluticasone from a metered dose inhaler (pMDI) was tested using four VHCs: AeroChamber plus Flow-Vu (AC), Babyhaler (BH), EasyChamber (EC), and Optichamber Diamond (OD). The in vitro setup included an anatomical child throat model, Next Generation Impactor, and a breathing simulator to generate tidal breathing of a four and a 6-year-old child, and adult type single inhalation.

RESULTS

OD showed the lowest proportion of fluticasone trapped in the throat with all breathing patterns. AC showed similar fine particle dose (FPD) in the respirable range (1-5 µm) irrespective of the breathing pattern. For BH, the median FPD 1-5 µm was highest during adult breathing. OD and EC showed higher overall DD and higher doses in the 1-5 µm range with paediatric breathing profiles compared to adult inhalation. The median DD and FPD 1-5 µm were significantly lower with BH compared to any other VHCs during tidal breathing. Compared to EC, the FPD of the other VHCs were skewed towards <2 µm particles.

CONCLUSION

Fluticasone delivery is markedly affected by breathing pattern and VHC model. The observed differences in throat deposition and FPD delivered may have significant clinical implications for side effects and controlling airway inflammation. All VHCs intended for paediatric use should undergo testing using internationally recognised standardised methods incorporating clinically relevant paediatric breathing patterns.

Small Airways Disease Affects Aerosol Deposition in Children with Severe Asthma: A Functional Respiratory Imaging Study

Background: Small airways disease (SAD) in severe asthma (SA) is associated with high disease burden. Effective treatment of SAD could improve disease control. Reduced end-expiratory flows (forced expiratory flow [FEF]25-75 and FEF75) are considered sensitive indicators of SAD. Inhaled medication should be delivered to the smaller peripheral airways to treat SAD effectively. Aerosol deposition is affected by structural airway changes. Little is known about the effect of SAD on aerosol delivery to the smaller peripheral airways. Functional respiratory imaging (FRI) is a validated technique using 3D reconstructed chest computed tomography (CT) and computational fluid dynamics to predict aerosol deposition in the airways. Aim: This study aims to compare central and peripheral (= small airways) deposition between children with SA and SAD and children with SA without SAD, with different inhaler devices and inhalation profiles. Methods: FRI was used to predict the deposition of beclomethasone/formoterol dry powder inhaler (DPI), beclomethasone/formoterol pressurized metered dose inhaler with valved holding chamber (pMDI/VHC), and salbutamol pMDI/VHC for different device-specific inhalation profiles in chest-CT of 20 children with SA (10 with and 10 without SAD). SAD was defined as FEF25-75 and FEF75 z-score < -1.645 and forced vital capacity (FVC) z-score > -1.645. No SAD was defined as forced expiratory volume (FEV)1, FEF25-75, FEF75, and FVC z-score > -1.645. The intrathoracic, central, and peripheral airways depositions were determined. Primary outcome was difference in central-to-peripheral (C:P) deposition ratio between children with SAD and without SAD. Results: Central deposition was significantly higher (∼3.5%) and peripheral deposition was lower (2.9%) for all inhaler devices and inhalation profiles in children with SAD compared with children without SAD. As a result C:P ratios were significantly higher for all inhaler devices and inhalation profiles, except for beclomethasone administered through DPI (p = .073), in children with SAD compared with children without SAD. Conclusion: Children with SA and SAD have higher C:P ratios, that is, higher central and lower peripheral aerosol deposition, than children without SAD. The intrathoracic, central, and peripheral deposition of beclomethasone/formoterol using DPI was lower than using pMDI/VHC.

Uncovering patterns of inhaler technique and reliever use: the value of objective, personalized data from a digital inhaler

Electronic inhalers provide information about patterns of routine inhaler use. During a 12-week study, 360 asthma patients using albuterol Digihaler generated 53,083 inhaler events that were retrospectively analyzed. A total of 41,528 (78%) of the recorded inhalation events were suitable for flow analysis (having a PIF ≥ 18 L/min and <120 L/min). Median PIF, inhalation volume, inhalation duration, and time to PIF for these events steadily decreased between the first and last 10 days of the study, by 5.1%, 12.6%, 15.9%, and 6.4%, respectively. Continuous short-acting beta2-agonist (SABA) overuse, defined as ≥2 SABA inhalations/week throughout the study period, was seen in 29% (n = 104) of patients. Of 260 patients with ≥1 instance of acute short-term SABA overuse, 55 (21%) had a confirmed exacerbation. Electronic recording of real-life inhaler use can capture valuable, objective information that could inform disease management and clinical decision-making.

Comparisons between In-Check DIAL® and PF810® in evaluation and training inspiratory capacity for using dry powder inhalers

BACKGROUND

Dry powder inhalers (DPIs) rely on both internal resistance and patients' inspiratory capacity for effective operation. Optimal inspiratory technique is crucial for DPI users. This study assessed the accuracy and repeatability of two available devices, PF810® and In-Check DIAL®, and analyzed their measurement errors and consistency in detecting inspiratory capacity.

METHODS

The accuracy and repeatability of peak inspiratory flow (PIF) and forced inspiratory vital capacity (FIVC) against various internal resistances of the two devices were assessed using standard waveforms generated by a breathing simulator. The agreement of PIF measurements between the two devices in healthy volunteers and chronic obstructive pulmonary disease (COPD) patients was analyzed with the intraclass correlation coefficient and Bland-Altman graphical analysis.

RESULTS

PF810® showed great accuracy and repeatability in measuring PIF, except for square waveforms at the lowest flow rate (20 L/min). In-Check DIAL® exhibited poor accuracy against high resistance levels. In scenarios with no resistance, In-Check DIAL® had significantly smaller measurement errors than PF810®, but larger errors against high resistance levels. The two devices showed excellent agreement (ICC > 0.80, P < 0.05), except for healthy volunteers against medium to high resistance (R3-R5) where the ICC was insignificant. Bland-Altman plots indicated small disagreements between the two devices for both healthy volunteers and COPD patients.

CONCLUSIONS

In-Check DIAL® exhibited poor accuracy and larger measurement errors than PF810® when detecting PIFs against higher internal resistances. However, its good performance against lower internal resistances, along with its cost-effectiveness and convenience made it appropriate for primary care. PF810® showed good accuracy and repeatability and could detect additional parameters of inspiratory capacity beyond PIF, though required further studies to confirm its clinical benefits.

Changes in Peak Inspiratory Flow After Acute Bronchodilation: An Observational Study of Patients with Stable Chronic Obstructive Pulmonary Disease

Introduction: Identifying factors influencing peak inspiratory flow (PIF) is essential for aerosol drug delivery in stable patients with chronic obstructive pulmonary disease. While a minimum PIF for dry powder inhalers (DPIs) is established, acute bronchodilator (BD) effects on PIF remain unknown. Materials and Methods: An inspiratory flow meter (In-Check™ DIAL) was used to measure PIF in stable patients during a 24-week observational cross-sectional study. Additionally, bronchodilator responsiveness (BDR) was determined using the In-Check DIAL device and spirometry. Patients received four puffs of albuterol, and pre- and post-BD PIF, forced expiratory volume in one second (FEV1), and forced vital capacity were measured. Sixty-three patients completed acute BDR data collection from July 31, 2019, to November 9, 2021. Primary endpoints were pre- and post-BD spirometry and PIF. Statistical analyses included PIF correlations with FEV1. BD change was assessed according to inhaler resistance and sex (subgroup analysis). Results: Median patient age was 64.8 years, 85.7% were non-Hispanic White, and 57.1% were female. The median increase in absolute PIF (In-Check DIAL) was 5.0 L/min, and the % PIF change was 8.9%. With albuterol, 57.1% experienced a PIF BD change >5.0%, whereas 49.2% experienced a change >10.0%. Similarly, 55.6% experienced an FEV1 BD change >5.0% and 28.6% had a >10.0% FEV1 BD change with albuterol. PIF was weakly correlated with FEV1 BD change (absolute; % PIF; r = 0.28 [p = 0.02]; r = 0.21 [p = 0.11]). Pre- and post-BD median PIF were 75.5 and 83.5 L/min for low-to-medium-resistance DPI and 45.0 and 52.0 L/min for high-resistance, respectively. The median increases in pre- and post-BD PIF were 9.0 L/min in males and 4.5 L/min in females. In contrast to when using the In-Check DIAL device, we observed no consistent bronchodilatory effects on PIF measured by spirometry. Conclusions: Using the In-Check DIAL device, ∼50% of patients experienced >10% PIF increase after acute BD, potentially enhancing medication lung deposition. Further research is required to understand PIF's impact on medication delivery. ClinicalTrials.gov Identifier: NCT04168775.

Impact of Pharmacist-Led Intervention on Adherence to Inhalers, Inhalation Technique, and Disease Control Among Asthma/COPD Patients in a Resource Limited Center: An Interventional Study

Background

Asthma and Chronic obstructive pulmonary disease (COPD) are chronic respiratory conditions characterized by airflow obstruction and respiratory symptoms. Adherence to prescribed inhaler therapy and correct inhalation technique are essential for effective disease management and optimal disease control. However, non-adherence and incorrect inhalation technique are common challenges faced by patients with asthma and COPD, leading to suboptimal treatment outcomes and increased healthcare burden.

Purpose

To study the impact of a pharmacist-led intervention on inhaler adherence, inhalation technique, and disease control among patients with asthma and COPD.

Patients and Methods

A pre-post interventional design assessed the effects of pharmacist-led intervention on inhaler adherence, inhalation techniques, and disease control in asthma and COPD patients at Dhulikhel Hospital in Nepal. Inclusion criteria: adult patient clinically diagnosed with asthma or COPD patients of all genders. The intervention comprised counseling patients with aids like videos, and informational leaflets. Impact was measured using checklist method for inhalation technique, the Test of Adherence to Inhaler (TAI) questionnaire for adherence to inhaler, and "Asthma Control Test (ACT)" or "COPD Assessment Test (CAT)" for disease control.

Results

The pharmacist-led intervention significantly increased adherence to inhalers, evidenced by a notable rise in the proportion of patients with good adherence (P<0.001). Sporadic, deliberate, and unwitting noncompliance pattern also improved significantly after the intervention (P<0.001, P<0.001 and P=0.001). Inhalation technique exhibited substantial improvement after intervention (P<0.001). The analysis indicated significant moderate negative correlations between "TIA" and "CAT" [ρ=-0.31; P=0.01], and between "inhalation technique score" and "CAT score" [ρ=-0.31; P=0.01] suggesting that as adherence to inhaler usage and inhalation technique improve, CAT scores tend to decrease, indicating reduced disease impact on the patient.

Conclusion

This study shows the potential efficacy of pharmacist-led intervention in enhancing adherence to inhaler, inhalation technique, and disease control in respiratory conditions such as asthma and COPD.

Interchanging Reusable and Disposable Nebulizers Used with Home-Based Compressors May Result in Inconsistent Dosing: A Laboratory Investigation with Device Combinations Supplied to the US Healthcare Environment

INTRODUCTION

Reusable nebulizer-compressor combinations deliver inhaled medications for patients with chronic lung diseases. On hospital discharge, the patient may take home the disposable nebulizer that was packaged and combine it with their home compressor. Though this practice may reduce waste, it can increase variability in medication delivery. Our study compared several reusable and disposable nebulizers packaged with compressor kits used in the US. We included a common disposable hospital nebulizer that may not be supplied with popular home kits but may be brought home after a hospitalization or emergency department visit. We focused on fine droplet mass < 4.7 μm aerodynamic diameter (FDM<4.7 μm), associated with medication delivery to the airways of the lungs.

METHODS

We evaluated the following nebulizer-compressor combinations (n = 5 replicates): 1. OMBRA® Table Top Compressor with MC 300® reusable and Airlife™ MistyMax™ 10® disposable nebulizer, 2. Sami-the-Seal® compressor with SideStream® reusable and disposable nebulizers and Airlife™ MistyMax 10™ disposable nebulizer, 3. VIOS® compressor with LC Sprint® reusable, and VixOne® and Airlife™ MistyMax™ disposable nebulizers, 4. Innospire® Elegance® compressor with SideStream® reusable and disposable nebulizers and Airlife™ MistyMax 10™ disposable nebulizer, 5. Willis-the-Whale® compressor with SideStream® reusable and disposable nebulizers and Airlife™ MistyMax 10™ disposable nebulizer, 6. Pari PRONEB® Max compressor with LC Sprint® reusable and Airlife™ MistyMax 10™ disposable nebulizer. We placed a 3-ml albuterol solution (0.833 mg/ml) in each nebulizer. A bacterial/viral filter was attached to the nebulizer mouthpiece to capture emitted medication, with the filter exit coupled to a simulator of a tidal breathing adult (rate = 10 cycles/min; Vt = 600 ml; I/E ratio = 1:2). The filter was replaced at 1-min intervals until onset of sputter. Droplet size distributions (n = 5 replicates/system) were determined in parallel by laser diffractometry.

RESULTS

Cumulative FDM<4.7 μm varied from 381 ± 33 μg for the best performing combination (Proneb/LC-Sprint) to 150 ± 21 μg for the system with the lowest output (VIOS®/MistyMax 10™).

CONCLUSIONS

Substituting one nebulizer for another can result in large differences in medication delivery to the lungs.

Factors Associated with Patient Education in Patients with Chronic Obstructive Pulmonary Disease (COPD) - A Primary Health Care Register-Based Study

Purpose

Patient education in chronic obstructive pulmonary disease (COPD) is recommended in treatment strategy documents, since it can improve the ability to cope with the disease. Our aim was to identify the extent of and factors associated with patient education in patients with COPD in a primary health care setting.

Patients and Methods

In this nationwide study, we identified 29,692 COPD patients with a registration in the Swedish National Airway Register (SNAR) in 2019. Data on patient education and other clinical variables of interest were collected from SNAR. The database was linked to additional national registers to obtain data about pharmacological treatment, exacerbations and educational level.

Results

Patient education had been received by 44% of COPD patients, 72% of whom had received education on pharmacological treatment including inhalation technique. A higher proportion of patients who had received education were offered smoking cessation support, had performed spirometry and answered the COPD Assessment Test (CAT), compared with patients without patient education. In the adjusted analysis, GOLD grade 2 (OR 1.29, 95% CI 1.18-1.42), grade 3 (OR 1.41, 95% CI 1.27-1.57) and grade 4 (OR 1.79, 95% CI 1.48-2.15), as well as GOLD group E (OR 1.17, 95% CI 1.06-1.29), ex-smoking (OR 1.70, 95% CI 1.56-1.84) and current smoking (OR 1.45, 95% CI 1.33-1.58) were positively associated with having received patient education, while cardiovascular disease (OR 0.92, 95% CI 0.87-0.98) and diabetes (OR 0.93, 95% CI 0.87-1.00) were negatively associated with receipt of patient education.

Conclusion

Fewer than half of the patients had received patient education, and the education had mostly been given to those with more severe COPD, ex- and current smokers and patients with fewer comorbidities. Our study highlights the need to enhance patient education at an earlier stage of the disease.

Pulmonary inhalation for disease treatment: Basic research and clinical translations

Pulmonary drug delivery has the advantages of being rapid, efficient, and well-targeted, with few systemic side effects. In addition, it is non-invasive and has good patient compliance, making it a highly promising drug delivery mode. However, there have been limited studies on drug delivery via pulmonary inhalation compared with oral and intravenous modes. This paper summarizes the basic research and clinical translation of pulmonary inhalation drug delivery for the treatment of diseases and provides insights into the latest advances in pulmonary drug delivery. The paper discusses the processing methods for pulmonary drug delivery, drug carriers (with a focus on various types of nanoparticles), delivery devices, and applications in pulmonary diseases and treatment of systemic diseases (e.g., COVID-19, inhaled vaccines, diagnosis of the diseases, and diabetes mellitus) with an updated summary of recent research advances. Furthermore, this paper describes the applications and recent progress in pulmonary drug delivery for lung diseases and expands the use of pulmonary drugs for other systemic diseases.

Novel inhalation therapy in pulmonary fibrosis: principles, applications and prospects

Pulmonary fibrosis (PF) threatens millions of people worldwide with its irreversible progression. Although the underlying pathogenesis of PF is not fully understood, there is evidence to suggest that the disease can be blocked at various stages. Inhalation therapy has been applied for lung diseases such as asthma and chronic obstructive pulmonary disease, and its application for treating PF is currently under consideration. New techniques in inhalation therapy, such as the application of microparticles and nanoparticles, traditional Chinese medicine monomers, gene therapy, inhibitors, or agonists of signaling pathways, extracellular vesicle interventions, and other specific drugs, are effective in treating PF. However, the safety and effectiveness of these therapeutic techniques are influenced by the properties of inhaled particles, biological and pathological barriers, and the type of inhalation device used. This review provides a comprehensive overview of the pharmacological, pharmaceutical, technical, preclinical, and clinical experimental aspects of novel inhalation therapy for treating PF and focus on therapeutic methods that significantly improve existing technologies or expand the range of drugs that can be administered via inhalation. Although inhalation therapy for PF has some limitations, the advantages are significant, and further research and innovation about new inhalation techniques and drugs are encouraged.

Aerosol Plumes of Inhalers Used in COPD

INTRODUCTION

The selection of inhaler device is of critical importance in chronic obstructive pulmonary disease (COPD) as the interaction between a patient's inhalation profile and the aerosol characteristics of an inhaler can affect drug delivery and lung deposition. This study assessed the in vitro aerosol characteristics of inhaler devices approved for the treatment of COPD, including a soft mist inhaler (SMI), pressurized metered-dose inhalers (pMDIs), and dry powder inhalers (DPIs).

METHODS

High-speed video recording was used to visualize and measure aerosol velocity and spray duration for nine different inhalers (one SMI, three pMDIs, and five DPIs), each containing dual or triple fixed-dose combinations of long-acting muscarinic receptor antagonists and long-acting β2-agonists, with or without an inhaled corticosteroid. Measurements were taken in triplicate at experimental flow rates of 30, 60, and 90 l/min. Optimal flow rates were defined based on pharmacopoeial testing requirements: 30 l/min for pMDIs and SMIs, and the rate achieving a 4-kPa pressure drop against internal inhaler resistance for DPIs. Comparison of aerosol plumes was based on the experimental flow rates closest to the optimal flow rates.

RESULTS

The Respimat SMI had the slowest plume velocity (0.99 m/s) and longest spray duration (1447 ms) compared with pMDIs (velocity: 3.65-5.09 m/s; duration: 227-270 ms) and DPIs (velocity: 1.43-4.60 m/s; duration: 60-757 ms). With increasing flow rates, SMI aerosol duration was unaffected, but velocity increased (maximum 2.63 m/s), pMDI aerosol velocity and duration were unaffected, and DPI aerosol velocity tended to increase, with a more variable impact on duration.

CONCLUSIONS

Aerosol characteristics (velocity and duration of aerosol plume) vary by inhaler type. Plume velocity was lower and spray duration longer for the SMI compared with pMDIs and DPIs. Increasing experimental flow rate was associated with faster plume velocity for DPIs and the SMI, with no or variable impact on plume duration, whereas pMDI aerosol velocity and duration were unaffected by increasing flow rate.

Successful Use of Easyhaler® Dry Powder Inhaler in Patients with Chronic Obstructive Pulmonary Disease; Analysis of Peak Inspiratory Flow from Three Clinical Trials

INTRODUCTION

There is increasing pressure to use environmentally friendly dry powder inhalers (DPI) instead of pressurized metered-dose inhalers (pMDI). However, correct inhalation technique is needed for effective inhaler therapy, and there is persistent concern whether patients with chronic obstructive pulmonary disease (COPD) can generate sufficient inspiratory effort to use DPIs successfully. The aims of this study were to find clinical predictors for peak inspiratory flow rate (PIF) and to assess whether patients with COPD had difficulties in generating sufficient PIF with a high resistance DPI.

METHODS

Pooled data of 246 patients with COPD from previous clinical trials was analyzed to find possible predictors of PIF via the DPI Easyhaler (PIFEH) and to assess the proportion of patients able to achieve an inhalation flow rate of 30 l/min, which is needed to use the Easyhaler successfully.

RESULTS

The mean PIF was 56.9 l/min and 99% (243/246) of the study patients achieved a PIF ≥ 30 l/min. A low PIF was associated with female gender and lower forced expiratory volume in 1 s (FEV1), but the association was weak and a statistical model including both only accounted for 18% of the variation seen in PIFEH.

CONCLUSIONS

Based on our results, impaired expiratory lung function or patient characteristics do not predict patients' ability to use DPIs in COPD; 99% of the patients generated sufficient PIFEH for successful dose delivery. Considering the targets for sustainability in health care, this should be addressed as DPIs are a potential option for most patients when choosing the right inhaler for the patient.

TRIAL REGISTRATION

Two of three included trials were registered under numbers NCT04147572 and NCT01424137. Third trial preceded registration platforms and therefore, was not registered.

Design of dry powder inhalers to improve patient outcomes: it's not just about the device

INTRODUCTION

Up to 50% of asthma/COPD patients make critical errors in dose preparation and dose inhalation with current marketed DPIs which negatively impact clinical outcomes. Others fail to adhere to their chronic treatment regimen.

AREAS COVERED

For this review, we describe how a human-factors approach to design of a dry powder inhaler can be used to improve usability, proficiency, and functionality of DPIs, while effectively mitigating critical errors associated with DPIs. The review highlights the critical importance of utilizing improved formulations with monomodal aerodynamic particle size distributions to reduce variability associated with oropharyngeal filtering of particles, flow rate dependence, and co-formulation effects.

EXPERT OPINION

Much of the variability in dose delivery with DPIs is associated with limitations of the bimodal APSDs inherent in current lactose blend formulations. Evidence supports that improved lung targeting and dose consistency can be achieved with drug-device combination products comprising spray-dried powders. Unfortunately, no data exists to assess whether these advances observed in in vitro and in vivo dose delivery studies will translate into improved clinical outcomes. Given the significant percentage of patients that receive suboptimal drug delivery with current DPIs it would behoove the industry to assess the efficacy of new approaches.

Using Dry Dispersion Laser Diffraction to Assess Dispersibility in Spheronized Agglomerate Formulations

In this study, dry dispersion laser diffraction was used to study the dispersibility of spheronized agglomerate formulations and identify geometric particle size metrics that correlated well with aerodynamic particle size distribution (APSD). Eleven unique batches of agglomerates were prepared for both laser diffraction and cascade impaction testing. Correlations between the particle size distribution (PSD) and aerodynamic particle size distribution (APSD) metrics for the eleven agglomerate batches were determined in a semi-empirical manner. The strongest correlation between APSD and PSD was observed between the impactor-sized mass (%ISM) and the cumulative PSD fraction <14.5 µm. The strongest correlation with fine particle fraction (FPF) was observed with the cumulative PSD fraction <0.99 micron (R-squared = 0.974). In contrast to the other APSD metrics, good correlations were not found between the mass median aerodynamic diameter (MMAD) and the cumulative PSD fractions. Overall, the implementation of laser diffraction as a surrogate for cascade impaction has the potential to streamline product development. Laser diffraction measurements offer savings in labor and turnaround time compared to cascade impaction.

Consideration and Assessment of Patient Factors When Selecting an Inhaled Delivery System in COPD

Because guidelines and strategies for pharmacologic treatment of COPD focus on specific classes of inhaled medications, there is an unmet need for information to guide health care professionals for selecting an inhaled medication delivery system that matches the unique characteristics of individual patients. This article provides guidance for selecting an inhaled medication delivery system based on three "key" patient factors: cognitive function, manual dexterity/strength, and peak inspiratory flow. In addition, information is provided about specific tests to assess these patient factors. Cognitive impairment with an estimated prevalence of 25% among patients with COPD adversely affects patients' ability to correctly use a handheld device. To our knowledge, the prevalence of impaired manual dexterity/strength has not been reported in those with COPD. However, 79% of patients with COPD have reported one or more physical impediments that could influence their ability to manipulate an inhaler device. The measurement of peak inspiratory flow against the simulated resistance (PIFr) of a dry powder inhaler establishes whether the patient has the inhalation ability for creating optimal turbulent energy within the device. A suboptimal PIFr for low to medium-high resistance dry powder inhalers has been reported in 19% to 84% of stable outpatients with COPD. Health care professionals should consider cognitive function, manual dexterity/strength, and PIFr in their patients with COPD when prescribing inhaled pharmacotherapy. Impairments in these patient factors are common among those with COPD and can affect the individual's competency and effectiveness of using inhaled medications delivered by handheld devices.

Towards More Precise Targeting of Inhaled Aerosols to Different Areas of the Respiratory System

Pharmaceutical aerosols play a key role in the treatment of lung disorders, but also systemic diseases, due to their ability to target specific areas of the respiratory system (RS). This article focuses on identifying and clarifying the influence of various factors involved in the generation of aerosol micro- and nanoparticles on their regional distribution and deposition in the RS. Attention is given to the importance of process parameters during the aerosolization of liquids or powders and the role of aerosol flow dynamics in the RS. The interaction of deposited particles with the fluid environment of the lung is also pointed out as an important step in the mass transfer of the drug to the RS surface. The analysis presented highlights the technical aspects of preparing the precursors to ensure that the properties of the aerosol are suitable for a given therapeutic target. Through an analysis of existing technical limitations, selected strategies aimed at enhancing the effectiveness of targeted aerosol delivery to the RS have been identified and presented. These strategies also include the use of smart inhaling devices and systems with built-in AI algorithms.

Traditional Chinese medicine inspired dual-drugs loaded inhalable nano-therapeutics alleviated idiopathic pulmonary fibrosis by targeting early inflammation and late fibrosis

Idiopathic pulmonary fibrosis (IPF) is a highly debilitating and fatal chronic lung disease that is difficult to cure clinically. IPF is characterized by a gradual decline in lung function, which leads to respiratory failure and severely affects patient quality of life and survival. Oxidative stress and chronic inflammation are believed to be important pathological mechanisms underlying the onset and progression of IPF, and the vicious cycle of NOX4-derived ROS, NLRP3 inflammasome activation, and p38 MAPK in pulmonary fibrogenesis explains the ineffectiveness of single-target or single-drug interventions. In this study, we combined astragaloside IV (AS-IV) and ligustrazine (LIG) based on the fundamental theory of traditional Chinese medicine (TCM) of "tonifying qi and activating blood" and loaded these drugs onto nanoparticles (AS_LIG@PPGC NPs) that were inhalable and could penetrate the mucosal barrier. Our results suggested that inhalation of AS_LIG@PPGC NPs significantly improved bleomycin-induced lung injury and fibrosis by regulating the NOX4-ROS-p38 MAPK and NOX4-NLRP3 pathways to treat and prevent IPF. This study not only demonstrated the superiority, feasibility, and safety of inhalation therapy for IPF intervention but also confirmed that breaking the vicious cycle of ROS and the NLRP3 inflammasome is a promising strategy for the successful treatment of IPF. Moreover, this successful nanoplatform is a good example of the integration of TCM and modern medicine.

Pulmonary delivery of nano-particles for lung cancer diagnosis and therapy: Recent advances and future prospects

Although our understanding of lung cancer has significantly improved in the past decade, it is still a disease with a high incidence and mortality rate. The key reason is that the efficacy of the therapeutic drugs is limited, mainly due to insufficient doses of drugs delivered to the lungs. To achieve precise lung cancer diagnosis and treatment, nano-particles (NPs) pulmonary delivery techniques have attracted much attention and facilitate the exploration of the potential of those in inhalable NPs targeting tumor lesions. Since the therapeutic research focusing on pulmonary delivery NPs has rapidly developed and evolved substantially, this review will mainly discuss the current developments of pulmonary delivery NPs for precision lung cancer diagnosis and therapy. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging.

Exploration of quality criteria for the detection of peak inspiratory flow under different resistance conditions

BACKGROUND

At present, robust quality criteria and methods for the assessment of Peak inspiratory flow meter performance are lacking.

OBJECTIVE

A standard flow-volume simulator for quality control analyses of an inhalation assessment device was utilized with different simulated resistance levels in order to propose a quality testing method and associated standard for this device type.

METHODS

A standard flow-volume simulator was utilized to assess the performance of an In-Check DIAL® (Device I) and an intelligent inhalation assessment device (Device P) at a fixed volume and flow rate. Indices used to evaluate these two instruments included repeatability, accuracy, linearity, and impedance.

RESULTS

Both devices exhibited good repeatability (<± 3 L/min). The difference between test results and standard simulator values for Device P was less than ± 5 L/min at resistance level R1 but higher than ± 5 L/min at resistance levels R2-5, while Device I were greater than 5 L/min at all resistance levels. The relative error for Device P was <± 10% at resistance levels R1, R2, and R4, but > 10% at resistance levels R3 and R5. The relative error values for Device I at all five resistance levels were > 10%. Device P passed the linearity test at the R2 resistance level, while Device I partially passed the linearity test at all five resistance levels.

CONCLUSION

Standard monitoring methods and standards provide a valuable approach to the more reliable clinical assessment and application of these instruments.

Does mixing inhaler devices lead to unchecked inhaler technique errors in patients with COPD? Findings from the cross-sectional observational MISMATCH study

BACKGROUND

Patients with chronic obstructive pulmonary disease (COPD) may be prescribed multiple inhalers that require different techniques for optimal performance. Mixing devices has been associated with poorer COPD outcomes suggesting that it leads to inappropriate inhaler technique. However, empirical evidence is lacking.

AIMS

Compare the nature and frequency of dry powder inhaler (DPI) technique errors in patients with COPD using (1) a single DPI or (2) mixed-devices (a DPI and pressurised metered dose inhaler (pMDI)).

METHODS

Data from the PIFotal study-a cross-sectional study on Peak Inspiratory Flow in patients with COPD using a DPI as maintenance therapy, capturing data from 1434 patients on demographic characteristics, COPD health status and inhaler technique-were used to select 291 patients using mixed-devices. Frequency matching based on country of residence and DPI device type was used to select 291 patients using a DPI-only for comparison. Predetermined checklists were used for the evaluation of DPI video recordings and complemented with additional errors that were observed in ≥10%. Error proportions were calculated for the (1) individual and total number of errors, (2) number of critical errors and (3) number of pMDI-related errors.

RESULTS

The study sample contained 582 patients (mean (SD) age 69.6 (9.4) years, 47.1% female). DPI technique errors were common, but not significantly different between the groups. The majority of patients made at least one critical error (DPI-only: 90.7% vs mixed-devices: 92.8%). Proportions of total, 'pMDI-related' and critical errors did not significantly differ between the groups.

CONCLUSION

The nature and frequency of inhaler technique errors did not substantially differ between patients prescribed with a single DPI and mixed-devices. Currently, 'pMDI-related errors' in DPI use are not accounted for in existing checklists.

TRIAL REGISTRATION NUMBER

ENCEPP/EUPAS48776.

Dry Powder Inhalers: From Bench to Bedside

Dry powder inhalers (DPIs) are now widely prescribed and preferred by the majority of patients. These devices have many advantages over the traditional pressurized metered-dose inhaler (pMDI) but they do have disadvantages. The characteristics of the dose emitted from a DPI are affected by the inhalation manoeuvre used by a patient. Each patient is different and the severity of their lung disease varies from mild to very severe. This affects how they use an inhaler and so determines the type of dose they inhale. An understanding of the pharmaceutical science related to DPIs is important to appreciate the relevance of how patients inhale through these devices. Also, each type of DPI has its unique dose preparation routine, and thus it is essential to follow these recommended steps because errors at this stage may result in no dose being inhaled. All issues related to the inhalation manoeuvre and dose preparation are addressed in this chapter. The importance of the inhalation technique is highlighted with a realization of inhale technique training and checking. During routine patient management, devices should not be switched nor doses increased unless the patient has demonstrated that they can and do use their DPI.

Evaluation of antibody drug delivery efficiency via nebulizer in various airway models and breathing patterns

BACKGROUND

Nebulizers are commonly used to treat respiratory diseases, which are a major cause of morbidity and mortality. While inhalation therapy with antibodies has been evaluated in preclinical studies and clinical trials for respiratory diseases, it has not yet been approved for treatment. Moreover, there is limited information regarding the delivery efficiency of therapeutic antibodies via nebulizer.

METHODS

In this study, the nebulization characteristics and drug delivery efficiencies were compared when immunoglobulin G (IgG) was delivered by five nebulizers using two airway models and five breathing patterns. The study confirmed that the delivered dose and drug delivery efficiency were reduced in the child model compared to those in the adult model and in the asthma pattern compared to those in the normal breathing pattern.

RESULTS

The NE-SM1 NEPLUS vibrating mesh nebulizer demonstrated the highest delivery efficiency when calculated as a percentage of the loading dose, whereas the PARI BOY SX + LC SPRINT (breath-enhanced) jet nebulizer had the highest delivery efficiency when calculated as a percentage of the emitted dose.

CONCLUSION

The results suggest that the total inspiration volume, output rate, and particle size should be considered when IgG nebulization is used. We, therefore, propose a method for evaluating the efficiency of nebulizer for predicting antibody drug delivery.

Preparation and evaluation of βcyclodextrin-based nanosponges loaded with Budesonide for pulmonary delivery

Budesonide (BUD) is a glucocorticosteroid used to treat chronic obstructive pulmonary disease. Despite this, it is a hydrophobic compound with low bioavailability. To address these hurdles, non-toxic and biocompatible βcyclodextrin-based nanosponges (βCD-NS) were attempted. BUD was loaded on five different βCD-NS at four different ratios. NS with 1,1'-carbonyldiimidazole (CDI) as a crosslinking agent, presented a higher encapsulation efficiency ( ̴ 80%) of BUD at 1:3 BUD: βCD-NS ratio (BUD-βCD-NS). The optimized formulations were characterized by Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), water absorption capacity (WAC), scanning electron microscopy (SEM), X-ray powder diffraction studies (XRD), particle size, zeta potential, encapsulation efficiency, in vitro and in vivo release studies, acute toxicity study, solid-state characterization, and aerosol performance. In vitro-in vivo correlation and cytotoxicity of the formulations on alveolar cells in vitro were further determined. In vitro and in vivo studies showed almost complete drug release and drug absorption from the lungs in the initial 2 h for pure BUD, which were sustained up to 12 h from BUD loaded into nanosponges (BUD-βCD-NS). Acute toxicity studies and in vitro cytotoxicity studies on alveolar cells proved the safety of BUD-βCD-NS. Several parameters, including particle size, median mass aerodynamic diameter, % fine particle fraction, and % emitted dose, were evaluated for aerosol performance, suggesting the capability of BUD-βCD-NS to formulate as a dry powder inhaler (DPI) with a suitable diluent. To sum up, this research will offer new insights into the future advancement of βCD-NS as drug delivery systems for providing controlled release of therapeutic agents against pulmonary disease.

A narrative review on the Synchrobreathe™: A novel breath-actuated pressurised metered-dose inhaler for the treatment of obstructive airway diseases

Pressurised metered-dose inhalers (pMDIs) and dry powder inhalers (DPIs), are widely used to deliver drugs for the treatment of asthma and chronic obstructive pulmonary disease (COPD). Incorrect use of inhalers is one of the main obstacles to achieving better clinical control. Indeed, with pMDIs, patients fail to synchronise actuation with inhalation due to a lack of coordination and with DPIs insufficient inspiratory effort compromises drug deposition in lungs. More than 50% of patients desire to switch their pMDIs and DPIs for a better device. This led to the development of pressurised breath-actuated inhalers (BAIs) with the aim of combining the beneficial features of pMDIs and DPIs and mitigating their problems. BAIs, e.g., Synchrobreathe™, are designed such that they are activated by a low inhalation effort and mechanically actuate the dose in synchrony to inspiration, thereby resolving the need to coordinate actuation with inspiration. BAIs have advantages, including ease of use, high lung deposition of medication, and greater patient preference. We discussed the design features, operating procedure, and clinical evidence of the Synchrobreathe™ device (Cipla Ltd, India), a BAI available with a wide range of drug combinations. Studies have shown that a higher number of patients (68.19%) used the Synchrobreathe™ without any error than the pMDI (56.21%), and that the vast majority of them (92%) found it easy to understand and use. The Synchrobreathe™ is an innovative, easy-to-use inhaler that may overcome many limitations associated with pMDIs and DPIs, thus potentially improving management of obstructive airway diseases and patients' quality of life.

Personalizing Selection of Inhaled Delivery Systems in Chronic Obstructive Pulmonary Disease

It can be challenging for healthcare professionals (HCPs) to prescribe inhaled therapy for patients with chronic obstructive pulmonary disease (COPD) because of the multiple individual and combinations of inhaled medications available in numerous delivery systems. Guidance on the selection of an inhaled delivery system has received limited attention compared with the emphasis on prescribing the class of the inhaled molecule(s). Although numerous recommendations and algorithms have been proposed to guide the selection of an inhaled delivery system for patients with COPD, no specific approach has been endorsed in COPD guidelines/strategies or by professional organizations. To provide recommendations for an inhaler selection strategy at initial and follow-up appointments, we examined the impact of patient errors using handheld inhalers on clinical outcomes and performed a focused narrative review to consider patient factors (continuity of the inhaled delivery system, cognitive function, manual function/dexterity, and peak inspiratory flow) when selecting an inhaled delivery system. On the basis of these findings, five questions are proposed for HCPs to consider in the initial selection of an inhaler delivery system and three questions to consider at follow-up. We propose that HCPs consider the inhaled medication delivery system as a unit and to match appropriate medication(s) with the unique features of the delivery system to individual patient factors. Assessment of inhaler technique and adherence together with patient outcomes/satisfaction at each visit is essential to determine whether the inhaled medication delivery system is providing benefits. Continued and repeated education on device features and correct technique is warranted to optimize efficacy.

Inhalable pH-responsive DNA tetrahedron nanoplatform for boosting anti-tumor immune responses against metastatic lung cancer

Despite advancements in the treatment of pulmonary cancer, the existence of mucosal barriers in lung still hampered the penetration and diffusion of therapeutic agents and greatly limited the therapeutic benefits. In this work, we reported a novel inhalable pH-responsive tetrahedral DNA nanomachines with simultaneous delivery of immunomodulatory CpG oligonucleotide and PD-L1-targeting antagonistic DNA aptamer (CP@TDN) for efficient treatment of pulmonary metastatic cancer. By precisely controlling the ratios of CpG and PD-L1 aptamer, the obtained CP@TDN could specifically release PD-L1 aptamer to block PD-1/PD-L1 immune checkpoint axis in acidic tumor microenvironment, followed by endocytosis by antigen-presenting cells to generate anti-tumor immune activation and secretion of anti-tumor cytokines. Moreover, inhalation delivery of CP@TDN showed highly-efficient lung deposition with greatly enhanced intratumoral accumulation, ascribing to the DNA tetrahedron-mediated penetration of pulmonary mucosa. Resultantly, CP@TDN could significantly inhibit the growth of metastatic orthotopic lung tumors via the induction of robust antitumor responses. Therefore, our work presents an attractive approach by virtue of biocompatible DNA tetrahedron as the inhalation delivery system for effective treatment of metastatic lung cancer.

GEMA 5.3. Spanish Guideline on the Management of Asthma

The Spanish Guideline on the Management of Asthma, better known by its acronym in Spanish GEMA, has been available for more than 20 years. Twenty-one scientific societies or related groups both from Spain and internationally have participated in the preparation and development of the updated edition of GEMA, which in fact has been currently positioned as the reference guide on asthma in the Spanish language worldwide. Its objective is to prevent and improve the clinical situation of people with asthma by increasing the knowledge of healthcare professionals involved in their care. Its purpose is to convert scientific evidence into simple and easy-to-follow practical recommendations. Therefore, it is not a monograph that brings together all the scientific knowledge about the disease, but rather a brief document with the essentials, designed to be applied quickly in routine clinical practice. The guidelines are necessarily multidisciplinary, developed to be useful and an indispensable tool for physicians of different specialties, as well as nurses and pharmacists. Probably the most outstanding aspects of the guide are the recommendations to: establish the diagnosis of asthma using a sequential algorithm based on objective diagnostic tests; the follow-up of patients, preferably based on the strategy of achieving and maintaining control of the disease; treatment according to the level of severity of asthma, using six steps from least to greatest need of pharmaceutical drugs, and the treatment algorithm for the indication of biologics in patients with severe uncontrolled asthma based on phenotypes. And now, in addition to that, there is a novelty for easy use and follow-up through a computer application based on the chatbot-type conversational artificial intelligence (ia-GEMA).

Enhanced powder dispersion of dual-excipient spray-dried powder formulations of a monoclonal antibody and its fragment for local treatment of severe asthma

The advent of biologics has brought renewed hope for patients with severe asthma, a condition notorious for being hampered by poor response to conventional therapies and adverse drug reactions owing to corticosteroid dependence. However, biologics are administered as injections, thereby precluding the benefits inhalation therapy could offer such as increased bioavailability at the site of action, minimal systemic side effects, non-invasiveness, and self-administration. Here, 2-hydroxypropyl-beta-cyclodextrin and ʟ-leucine were co-spray-dried, as protein stabiliser and dispersion enhancer, respectively, at various weight ratios to produce a series of formulation platforms. Powder aerosolisation characteristics and particle morphology were assessed for suitability for pulmonary delivery. The selected platform with the best aerosol performance, a 1:1 ratio of the excipients, was then incorporated with a monoclonal antibody directed against IL-4 receptor alpha or its antigen-binding fragment. The dual-excipient antibody formulations exhibited emitted fraction of at least 80% and fine particle fraction exceeding 60% in cascade impactor study, while the residual moisture content was within a desirable range between 1% and 3%. The in vitro antigen-binding ability and inhibitory potency of the spray-dried antibody were satisfactorily preserved. The results from this study corroborate the viability of inhaled solid-state biomacromolecules as a promising treatment approach for asthma.

Modeled small airways lung deposition of two fixed-dose triple therapy combinations assessed with in silico functional respiratory imaging

BACKGROUND

Small airways disease plays a key role in the pathogenesis of chronic obstructive pulmonary disease (COPD) and is a major cause of obstruction; therefore, it is a critical pharmacotherapy target. This study evaluated lung deposition of two inhaled corticosteroid (ICS)/long-acting β2-agonist/long-acting muscarinic antagonist single-inhaler triple therapies using in silico functional respiratory imaging (FRI). Deposition was assessed using real-world inhalation profiles simulating everyday use where optimal inhalation may be compromised.

METHODS

Three-dimensional airway models were produced from 20 patients with moderate-to-very severe COPD. Total, central, and regional small airways deposition as a percentage of delivered dose of budesonide/glycopyrronium/formoterol fumarate dihydrate (BGF) 160/7.2/5 µg per actuation and fluticasone furoate/umeclidinium/vilanterol (FF/UM/VI) 100/62.5/25 µg were evaluated using in silico FRI based on in vitro aerodynamic particle size distributions of each device. Simulations were performed using multiple inhalation profiles of varying durations and flow rates representing patterns suited for a pressurized metered-dose inhaler or dry-powder inhaler (four for BGF, two for FF/UM/VI, with one common profile). For the common profile, deposition for BGF versus FF/UM/VI was compared post-hoc using paired t-tests.

RESULTS

Across inhalation profiles, mean total lung deposition was consistently higher with BGF (47.0-54.1%) versus FF/UM/VI (20.8-22.7%) and for each treatment component, with greater deposition for BGF also seen in the central large airways. Mean regional small airways deposition was also greater across inhalation profiles with BGF (16.9-23.6%) versus FF/UM/VI (6.8-8.7%) and for each treatment component. For the common profile, total, central, and regional small airways deposition were significantly greater for BGF versus FF/UM/VI (nominal p < 0.001), overall and for treatment components; notably, regional small airways deposition of the ICS components was approximately five-fold greater with budesonide versus fluticasone furoate (16.1% vs. 3.3%).

CONCLUSIONS

BGF was associated with greater total, central, and small airways deposition for all components versus FF/UM/VI. Importantly, using an identical inhalation profile, there was an approximately five-fold difference in small airways deposition for the ICS components, with only a small percentage of the ICS from FF/UM/VI reaching the small airways. Further research is needed to understand if the enhanced delivery of BGF translates to clinical benefits.

Translated impact on carbon footprint from choice of inhaled therapy: a Danish scenario

With increasing climate change, all sources of greenhouse gases must be considered. Hydrofluorocarbon (HFC) propellants are used in all pressurised metered dose inhalers (pMDIs) and, although they are not as ozone-depleting as the earlier chlorofluorocarbons (CFCs), they are potent greenhouse gases and there is a general ask for reduction in their use [1]. In this respect, respiratory doctors indirectly affect climate change through their prescription patterns [2], something only few are aware of, and which may be difficult to translate and explain to patients. To illustrate the impact of switching from pMDIs to dry powder inhalers (dMDIs) we wanted to compare climate impact of inhaler switching to climate costs of well-known items and activities in Denmark, a country with a population of 6 million inhabitants.

Carbon footprint of MDIs can be translated into measures that are intuitive to both patients and health professionals https://bit.ly/45iVbHC

Breathe easy: inhalational therapy for feline inflammatory airway disease

PRACTICAL RELEVANCE

Feline inflammatory airway diseases, including (but not limited to) asthma, chronic bronchitis and bronchiectasis, are common and incurable disorders. These diseases require lifelong therapy and may result in substantial morbidity and, in some cases, mortality. Goals of therapy include reduction or resolution of clinical signs and the underlying pathologic processes driving those clinical signs. Inhalational therapy has the advantage of topical delivery of drugs to target tissues at higher doses with fewer systemic effects than oral medications. There are multiple options for delivery devices, and proper selection and training on the use of these devices - including acclimation of the cat to the device - can maximize therapeutic efficacy.

AIM

As inhalational therapy is uncommonly used by many veterinarians and owners, this review article provides a foundation on the selection and use of devices and inhalant medications for specific feline inflammatory airway diseases. Cats present a unique challenge with respect to the use of inhalers, and easy-to-follow steps on acclimating them to the devices are provided. The review also discusses the mechanics of inhalational therapy and helps clarify why certain medications, such as albuterol (salbutamol), fluticasone or budesonide, are chosen for certain diseases. The ultimate aim is that the practitioner should feel more comfortable managing common airway diseases in cats.

EVIDENCE BASE

In compiling their review, the authors searched the veterinary literature for articles in English that discuss inhalational therapy in cats, and which focus primarily on inhaled glucocorticoids and bronchodilators. While most literature on inhalational therapy in cats is based on experimental feline asthma models, there are some studies demonstrating successful treatment in cats with naturally occurring inflammatory airway disease.

[Diagnosis and treatment of asthma: a guideline for respiratory specialists 2023 - published by the German Respiratory Society (DGP) e. V.]

The management of asthma has fundamentally changed during the past decades. The present guideline for the diagnosis and treatment of asthma was developed for respiratory specialists who need detailed and evidence-based information on the new diagnostic and therapeutic options in asthma. The guideline shows the new role of biomarkers, especially blood eosinophils and fractional exhaled NO (FeNO), in diagnostic algorithms of asthma. Of note, this guideline is the first worldwide to announce symptom prevention and asthma remission as the ultimate goals of asthma treatment, which can be achieved by using individually tailored, disease-modifying anti-asthmatic drugs such as inhaled steroids, allergen immunotherapy or biologics. In addition, the central role of the treatment of comorbidities is emphasized. Finally, the document addresses several challenges in asthma management, including asthma treatment during pregnancy, treatment of severe asthma or the diagnosis and treatment of work-related asthma.

Investigation on the Influence of Design Features on the Performance of Dry Powder Inhalers: Spiral Channel, Mouthpiece Dimension, and Gas Inlet

As inhaler design is rarely studied but critically important in pulmonary drug delivery, this study investigated the influence of inhaler designs, including a novel spiral channel, mouthpiece dimensions (diameter and length) as well as gas inlet. Experimental dispersion of a carrier-based formulation in conjugation with computational fluid dynamics (CFD) analysis, was performed to determine how the designs affect inhaler performance. Results reveal that inhalers with a narrow spiral channel could effectively increase drug-carrier detachment by introducing high velocity and strong turbulent flow in the mouthpiece, although the drug retention in the device is significantly high. It is also found that reducing mouthpiece diameter and gas inlet size could greatly improve the fine particle dose delivered to the lungs, whereas the mouthpiece length plays a trivial influence on the aerosolization performance. This study contributes toward a better understanding of inhaler designs as relevant to overall inhaler performance, and sheds light on how the designs affect device performance.

Evaluating dry powder inhalers: From in vitro studies to mobile health technologies

Dry powder inhalers (DPIs) are essential in treating patients with pulmonary diseases. Since DPIs were introduced in the 1960s, a remarkable improvement has been made in their technology, dose delivery, efficiency, reproducibility, stability, and performance based on safety and efficacy. While there are many DPIs on the market and several more under development, it is vital to evaluate the performance of DPIs for effective aerosol drug delivery to patients with respiratory disorders. Their performance evaluation includes particle size, metering system, device design, dose preparation, inhalation technique, and patient-device integration. The purpose of this paper is to review current literature evaluating DPIs through in vitro studies, computational fluid models, and in vivo/clinical studies. We will also explain how mobile health applications are used to monitor and evaluate patients' adherence to prescribed medications.

Extracellular vesicles and COPD: foe or friend?

Chronic obstructive pulmonary disease (COPD) is a chronic inflammatory airway disease characterized by progressive airflow limitation. The complex biological processes of COPD include protein hydrolysis tissue remodeling, innate immune inflammation, disturbed host-pathogen response, abnormal cellular phenotype conversion, and cellular senescence. Extracellular vesicles (EVs) (including apoptotic vesicles, microvesicles and exosomes), are released by almost all cell types and can be found in a variety of body fluids including blood, sputum and urine. EVs are key mediators in cell-cell communication and can be used by using their bioactive substances (DNA, RNA, miRNA, proteins and other metabolites) to enable cells in adjacent and distant tissues to perform a wide variety of functions, which in turn affect the physiological and pathological functions of the body. Thus, EVs is expected to play an important role in the pathogenesis of COPD, which in turn affects its acute exacerbations and may serve as a diagnostic marker for it. Furthermore, recent therapeutic approaches and advances have introduced EVs into the treatment of COPD, such as the modification of EVs into novel drug delivery vehicles. Here, we discuss the role of EVs from cells of different origins in the pathogenesis of COPD and explore their possible use as biomarkers in diagnosis, and finally describe their role in therapy and future prospects for their application. Graphical Abstract.

Drugs Prescribed for Asthma and Their Adverse Effects on Dental Health

Asthma is a chronic, heterogeneous respiratory pathology characterized by reversible airway inflammation. Therapeutics focus on symptom reduction and control, aimed at preserving normal pulmonary function and inducing bronchodilatation. The objective of this review is to describe the adverse effects produced by anti-asthmatic drugs on dental health, according to the reported scientific evidence. A bibliographic review was carried out on databases, such as Web of science, Scopus, and ScienceDirect. Most anti-asthmatic medications are administered using inhalers or nebulizers, making it impossible to avoid contact of the drug with hard dental tissues and oral mucosa, and thus promoting a greater risk of oral alterations, mainly due to decreases in the salivary flow and pH. Such changes can cause diseases, such as dental caries, dental erosion, tooth loss, periodontal disease, bone resorption, as well as fungal infections, such as oral candidiasis.

A four-part guide to lung immunology: Invasion, inflammation, immunity, and intervention

Lungs are important respiratory organs primarily involved in gas exchange. Lungs interact directly with the environment and their primary function is affected by several inflammatory responses caused by allergens, inflammatory mediators, and pathogens, eventually leading to disease. The immune architecture of the lung consists of an extensive network of innate immune cells, which induce adaptive immune responses based on the nature of the pathogen(s). The balance of immune responses is critical for maintaining immune homeostasis in the lung. Infection by pathogens and physical or genetic dysregulation of immune homeostasis result in inflammatory diseases. These responses culminate in the production of a plethora of cytokines such as TSLP, IL-9, IL-25, and IL-33, which have been implicated in the pathogenesis of several inflammatory and autoimmune diseases. Shifting the balance of Th1, Th2, Th9, and Th17 responses have been the targets of therapeutic interventions in the treatment of these diseases. Here, we have briefly reviewed the innate and adaptive i3mmune responses in the lung. Genetic and environmental factors, and infection are the major causes of dysregulation of various functions of the lung. We have elaborated on the impact of inflammatory and infectious diseases, advances in therapies, and drug delivery devices on this critical organ. Finally, we have provided a comprehensive compilation of different inflammatory and infectious diseases of the lungs and commented on the pros and cons of different inhalation devices for the management of lung diseases. The review is intended to provide a summary of the immunology of the lung, with an emphasis on drug and device development.

Comparison of Aerosol Deposition Between a Cynomolgus Macaque and a 3D Printed Cast Model of the Animal

PURPOSE

Preclinical aerosol studies using animals are essential for evaluating toxic or therapeutic effects on human respiratory tract. Macaques are relevant animal models for respiratory studies, but they are sensitive, expensive and difficult-to-access.

METHODS

In the context of preliminary studies before animal experiments, we set up an alternative in vitro anatomical model of macaque airways to reduce, refine and replace (3Rs) the animals. We printed an in vitro anatomical cast until the third bronchial division from X-ray computed tomography data of a healthy cynomolgus macaque. This in vitro model was then connected to a respiratory pump to mimic macaque's breathing. We assessed the relevance of this in vitro model, by comparing aerosol deposition patterns obtained with the anatomical model and in three macaques using planar gamma camera imaging. DTPA-^99mTechnetium aerosols were produced using three jet nebulizers, generating three different particle sizes: 13.1, 3.2 and 0.93 µm in terms of the mass median aerodynamic diameter (MMAD).

RESULTS

The data showed no statistical differences between the animal and anatomical in vitro models in terms of total aerosol deposited in the airways. However, the distribution of the deposition in the airways showed a higher deposited fraction in the upper respiratory tract in the animals than the in vitro model for all particle sizes.

CONCLUSIONS

The anatomical printed model appears to be a relevant in vitro tool to predict total aerosol deposition in macaque airways.

High inhaler resistance does not limit successful inspiratory maneuver among patients with asthma or COPD

INTRODUCTION

There has been an active discussion on the sustainability of inhaler therapy in respiratory diseases, and it has cast a shadow on pMDIs which rely on propellant with high global warming potential (GWP). DPIs offer a lower GWP and effective alternative, but there has been concern whether all patients can generate sufficient inspiratory effort to disperse the drug. This review focuses on airflow resistance of DPIs and its clinical relevance.

AREAS COVERED

For this narrative review, we searched the literature for studies comparing flow patterns with different devices. We also included a section on clinical trials comparing reliever administration with DPI, pMDI with spacer, and nebulizer during exacerbation.

EXPERT OPINION

The evidence supports the efficacy of DPIs irrespective of respiratory condition or age of the patient even during acute exacerbations. Air flow resistance does not limit the use of DPIs and the patients were able to generate sufficient inspiratory flow rate with almost any device studied. None of 16 identified clinical trials comparing reliever administration via DPIs to other types of devices during exacerbation or bronchial challenge showed statistically significant difference between the device types in FEV1 recovery. DPIs performed as well as other types of inhaler devices even during asthma or COPD exacerbation.

Bacterial Contamination of Inhalation Chambers Used for Cats and Dogs with Chronic Airway Diseases

Inhalation chambers (ICs) are regularly used in veterinary medicine for the inhalative treatment of chronic respiratory diseases in dogs and cats. Since therapy is usually required lifelong and daily, devices are frequently in use. The aim of this study was to identify bacterial contamination of ICs used for cats and dogs in relation to the applied cleaning measures. Swabs from ICs of 66 cats and 19 dogs with chronic airway diseases were obtained using a standardized protocol and subsequently cultured. A questionnaire was completed by the pet owners regarding the history of their pet's illness and applied device cleaning measures. Overall, 64% (54/86) of the ICs were found to be contaminated; the mask was significantly (p < 0.001) more often contaminated than other device parts. Most cultured bacteria were environmental contaminants; however, some harbored pathogenic potential. Cleaning frequency and method did not significantly influence the presence of contamination. Bacterial contamination of ICs, used for cats and dogs, is common but is not significantly influenced by the type or frequency of cleaning. To avoid potential infection by opportunistic bacteria, the instruction of pet owners regarding the maintenance of the ICs is recommended.

Can patients achieve sufficient peak inspiratory flow rate (PIFR) with Turbuhaler® during acute exacerbation of asthma?

INTRODUCTION

Anti-inflammatory reliever (AIR) with or without regular maintenance delivered through Turbuhaler® has been widely recommended in the GINA strategy document. These patients are not prescribed with additional reliever inhalers, but dependent on Turbuhaler^® during acute asthma episodes. The peak inspiratory flow rate (PIFR) is crucial in drug delivery from a dry powder inhaler (DPI) such as Turbuhaler^®. Despite its increasing usage, there are some concerns that patients on Turbuhaler^® are not able to achieve adequate PIFR during acute exacerbation of asthma.

OBJECTIVE

This study aimed to assess the PIFR at resistance settings that matched Turbuhaler^® in patients with acute exacerbation of asthma.

METHODOLOGY

A six-month cross-sectional study was conducted at the Emergency Department (ED) of Hospital Sultanah Bahiyah and Hospital Kulim, Kedah, Malaysia. Adult patients diagnosed with mild to moderate acute exacerbations of asthma were recruited. The PIFRs were measured using the In-Check DIAL G16 that was set to simulate the resistance of Turbuhaler^® (R3). The PIFRs were assessed before (pre) and after (post) the initial bronchodilator (BD) treatment at the ED. The minimal required PIFR was defined as flow rates ≥ 30 L/min while a PIFR of 60 L/min was considered as optimal.

RESULTS

A total of 151 patients (81 females and 70 males) were recruited. The mean age was 37.5 years old with a range between 18 and 79 years old. The results showed that 98% (n = 148) of patients managed to achieve the minimal PIFR required for pre-BD. The mean PIFR pre-BD was 60 ± 18.5 L/min and post-BD was 70 ± 18.5 L/min. Furthermore, more than half (54%, n = 82) of the patients recorded PIFR ≥ 60 L/min during pre-BD, and about three-quarters (71%, n = 92) achieved PIFR ≥ 60 L/min post-BD. The PIFR showed a moderate correlation with peak expiratory flow rate (PEFR) (r = 0.55, 95% CI: 0.43-0.65, p < 0.001).

CONCLUSION

The majority of patients with asthma in the present study were able to achieve sufficient PIFR from Turbuhaler^® during mild to moderate acute exacerbations.

In Vitro Drug Delivery of a Fixed-Dose Combination of Fluticasone Furoate/Umeclidinium/Vilanterol from a Dry Powder Inhaler

Background: Dry powder inhalers (DPIs) require patients to impart sufficient energy through inhalation to ensure adequate dose emission, medication deaggregation, and resultant particle sizes suitable for lung deposition. There is an ongoing debate regarding the level of inspiratory effort, and therefore inspiratory flow rate, needed for optimal dose delivery from DPIs. Materials and Methods: The delivered dose (DD) and fine particle fraction (FPF) for each component of fluticasone furoate/umeclidinium/vilanterol (FF/UMEC/VI) 100/62.5/25 μg and FF/UMEC/VI 200/62.5/25 μg ELLIPTA DPIs were assessed at flow rates of 30, 60, and 90 L/min. Electronic lung (eLung) (eLung; an electronic breathing simulator) assessments were conducted to replicate inhalation profiles representing a wide range of inhalation parameters and inhaled volumes achieved by patients with chronic obstructive pulmonary disease (COPD) or asthma of all severity levels. Timing and duration of dose emission were assessed using a particle detector located at the entrance of an anatomical throat cast attached to the eLung. Results: During DD assessment, a mean of >80% of the nominal blister content (nbc) was emitted from the ELLIPTA DPI at all flow rates. In Next Generation Impactor assessments, the observed mean DD across flow rates for FF/UMEC/VI 100/62.5/25 μg ranged from 85.9% to 97.0% of nbc and 84.0% to 93.5% for FF/UMEC/VI 200/62.5/25 μg. In eLung assessments, 82.8% to 95.5% of nbc was delivered across the PIF range, 43.5 to 129.9 L/min (COPD), and 85.1% to 92.3% across the PIF range, 67.4 to 129.9 L/min (asthma). The FPF (mass <5 μm; % nbc) for each component was comparable across all flow rates and inhalation profiles. Dose emission timings indicated that near-complete dose emission occurs before reaching PIF. Conclusions: Dose delivery assessments across all flow rates and inhalation profiles indicate that patients with all severity levels of COPD or asthma can achieve the required inspiratory effort for efficient delivery of all components of FF/UMEC/VI from the ELLIPTA DPI. Dose emission profiles suggest rapid and near-complete dose delivery from the ELLIPTA DPI before reaching PIF.

The impact of the clip-tone training device and its smartphone application to pressurized metered-dose inhaler in adult asthmatics

BACKGROUND

Despite traditional inhaler technique counseling, many patients make clinically important mistakes when they use their inhalers. This study investigates the value of using a connected inhalation aid when adults with asthma use their metered-dose inhaler (pMDI).

METHODS

Adult asthmatics (n = 221), using a pMDI, were randomly divided into a verbal training group (n = 110) and an enhanced training group (n = 111). 21 subjects were lost during the study, each group included 100 subjects at the end of the study. The study was divided into 3 visits. Traditional pMDI training was delivered at visit 1 to both groups which included an explanation of the steps with special stress on frequently mistaken steps e.g. exhalation before use and inhaling slowly and deeply. The enhanced training group was enhanced by using the Clip-Tone training aid linked to its dedicated smartphone app. enhanced training patients were encouraged to use this connected training aid during real-life use between the study visits. Baseline data were collected at the first visit. At all three visits (baseline, 1 month, and 2 months), subjects first completed all inhaler techniques, health outcome measures, received inhaler training, then took bronchodilators, and 30 min later repeated the lung function outcome measures.

RESULTS

Both groups showed a significant decrease (p < 0.001) in the total mean number of pMDI inhalation techniques mistakes at visits 2 and 3, with a lower number of mistakes (p < 0.05) for slower inhalations for the enhanced training group compared to the verbal training group. Inhalation time (an indicator of a slow inhalation) significantly (p < 0.05) improved at each visit in the enhanced training group. In the enhanced training group, there was a gradual significant increase (p < 0.05) in lung functions while the improvements in the verbal training group were only significant (p < 0.05) at visit 3, and by visit 3, the enhanced training group had significantly higher scores than the verbal training group on both FEV₁ and PEF% predicted. The asthma control test (ACT) score improved at each visit in both groups with a greater increase in the enhanced training group (p < 0.05) and more patients (44 and 21) improved their score by 3 or more in the second and third visit respectively.

CONCLUSION

The connected Clip-Tone training aid helped patients improve their pMDI inhaler technique and their asthma control compared to traditional methods. These results highlight the potential of connected inhalers in the future management of inhaled therapy.

An Investigation into the Factors Associated with Incorrect Use of a Pressurized Metered-Dose Inhaler in Japanese Patients

Rationale: Inhalation of the correct dose of a short-acting beta 2 agonist (SABA) from a pressurized metered-dose inhaler (pMDI) is essential for the relief of symptoms in patients with asthma and/or chronic obstructive pulmonary disease. The aim of this study was to evaluate the prevalence and factors associated with the incorrect use of a pMDI. Methods: This study retrospectively assessed the electronic medical records of 161 patients with various respiratory diseases. The patients had never used a pMDI and underwent training by pharmacists educated in the use of a pMDI followed by bronchodilator reversibility testing at our hospital. The patients' characteristics and various lung capacity parameters were evaluated for association with the incorrect use of a pMDI. Results: Thirty-nine of the 161 (24.2%) patients, including 46% of 28 patients older than 80 years, used the pMDI incorrectly, mainly because of incoordination between activation of the device and inhalation (n = 11), inadequate strength to manipulate the device (n = 9), too short duration of inhalation (n = 6), and difficulty in breath holding (n = 3). Advanced age; lower height; and decreased lung volumes, including vital capacity (VC), inspiratory capacity, inspiratory reserve volume (IRV), forced vital capacity (FVC), forced expiratory volume in one second (FEV1), and peak expiratory flow rate, were associated with the incorrect use of a pMDI. Neither the body weight, tidal volume, expiratory reserve volume, %FVC predicted, %FEV1 predicted, nor FEV1% was associated with the incorrect use of a pMDI. Multivariate binomial logistic regression analysis identified decreased IRV as the only independent predictor associated with the incorrect use of a pMDI. Conclusions: Physicians should be aware that elderly patients or patients with decreased IRV might be unable to obtain the correct SABA dose from a pMDI. A large-scale prospective study is required to confirm these findings from our retrospective study with a small group of patients.

The Promising Therapeutic Potential of Oligonucleotides for Pulmonary Fibrotic Diseases

INTRODUCTION

Fibrotic lung diseases represent a large subset of diseases with an unmet clinical need. Oligonucleotide therapies (ONT) are a promising therapeutic approach for the treatment of pulmonary disease as they can inhibit pathways that are otherwise difficult to target. Additionally, targeting the lung specifically with ONT is advantageous because it reduces the possibilities of systemic side effects and tolerability concerns.

AREAS COVERED

This review presents the chemical basis of designing various ONTs currently known to treat fibrotic lung diseases. Further, the authors have also discussed the delivery vehicle, routes of administration, physiological barriers of the lung, and toxicity concerns with ONTs.

EXPERT OPINION

ONTs provide a promising therapeutic approach for the treatment of fibrotic diseases of the lung, particularly because ONTs directly delivered to the lung show little systemic side effects compared to current therapeutic strategies. Dry powder aerosolized inhalers may be a good strategy for getting ONTs into the lung in humans. However, as of now, no dry powder ONTs have been approved for use in the clinical setting, and this challenge must be overcome for future therapies. Various delivery methods that can aid in direct targeting may also improve the use of ONTs for lung fibrotic diseases.

No-shaking and shake-fire delays affect respirable dose for suspension but not solution pMDIs

It has long been accepted that suspension pressurized metered-dose inhalers (pMDIs) must be shaken if a correct dose is to be delivered, if not, it will usually be higher than the label claim. The purpose of this work was to investigate the influence of the device being unshaken, shaken and after a period of delay in pMDI actuation on the Fine Particle Mass (<5 µm), Extra Fine Particle Mass (<2 µm) and MMAD. Solution and suspension commercial pMDIs containing one, two or three components were used in the study. Most of the suspension pMDIs produced variable amounts of respirable size drug following the shake-fire delays tested in terms of the label claim dose. The effect was even more critical if the inhaler was not shaken and the FPM was found to be between -82 % for Symbicort and 363 % for Ventolin compared with the control values. In the case of MMAD measurements, Seretide and Serzyl inhalers showed the largest change from around 3 µm to 4.2-5.1 µm when not shaken. Conversely, the FPM and MMAD for the solution aerosols remained unchanged whether or not they were shaken or when a progressive increase in the delay in actuation after shaking was employed.

In Silico Quantification of Intersubject Variability on Aerosol Deposition in the Oral Airway

The extrathoracic oral airway is not only a major mechanical barrier for pharmaceutical aerosols to reach the lung but also a major source of variability in lung deposition. Using computational fluid dynamics, deposition of 1−30 µm particles was predicted in 11 CT-based models of the oral airways of adults. Simulations were performed for mouth breathing during both inspiration and expiration at two steady-state flow rates representative of resting/nebulizer use (18 L/min) and of dry powder inhaler (DPI) use (45 L/min). Consistent with previous in vitro studies, there was a large intersubject variability in oral deposition. For an optimal size distribution of 1−5 µm for pharmaceutical aerosols, our data suggest that >75% of the inhaled aerosol is delivered to the intrathoracic lungs in most subjects when using a nebulizer but only in about half the subjects when using a DPI. There was no significant difference in oral deposition efficiency between inspiration and expiration, unlike subregional deposition, which shows significantly different patterns between the two breathing phases. These results highlight the need for incorporating a morphological variation of the upper airway in predictive models of aerosol deposition for accurate predictions of particle dosimetry in the intrathoracic region of the lung.