Health effects of residential wood smoke particles: the importance of combustion conditions and physicochemical particle properties

Associations between short-term exposure to airborne carbonaceous particles and mortality: A time-series study in London during 2010-2019

Exposure to ambient particulate matter (PM) has been identified as a major global health concern; however, the importance of specific chemical PM components remains uncertain. Recent studies have suggested that carbonaceous aerosols are important detrimental components of the particle mixture. Using time-series methods, we investigated associations between short-term exposure to carbonaceous particles and mortality in London, UK. Daily counts of non-accidental, respiratory, and cardiovascular deaths were obtained between 2010 and 2019. For the same period, daily concentrations of carbonaceous particles: organic (OC), elemental (EC), wood-burning (WC), total carbon (TC) and equivalent black carbon (eBC) were sourced from two centrally located monitoring sites (one urban-traffic and one urban-background). Generalized additive models were used to estimate the percentage change in mortality risk associated with interquartile range increases in particulate concentrations. Lagged effects up to 3 days were examined. Stratified analyses were conducted by age, sex, and season, separate analyses were also performed by site-type. For non-accidental mortality, positive associations were observed for all particle species at lag1, including statistically significant percentage risk changes in WC (0.51% (95%CI: 0.19%, 0.82%) per IQR (0.68 μg/m3)) and OC (0.45% (95%CI: 0.04%, 0.87% per IQR (2.36 μg/m3)). For respiratory deaths, associations were greatest for particulate concentrations averaged over the current and previous 3 days, with increases in risk of 1.70% (95%CI: 0.64%, 2.77%) for WC and 1.31% (95%CI: -0.08%, 2.71%) for OC. No associations were found with cardiovascular mortality. Results were robust to adjustment for particle mass concentrations. Stratified analyses suggested particulate effects were greatest in the summer and respiratory associations more pronounced in females. Our findings are supportive of an association between carbonaceous particles and non-accidental and respiratory mortality. The strongest evidence of an effect was for WC; this is of significance given the rising popularity of wood-burning for residential space heating and energy production across Europe.

Toxicity of particulate emissions from residential biomass combustion: An overview of in vitro studies using cell models

This article aims to critically review the current state of knowledge on in vitro toxicological assessments of particulate emissions from residential biomass heating systems. The review covers various aspects of particulate matter (PM) toxicity, including oxidative stress, inflammation, genotoxicity, and cytotoxicity, all of which have important implications for understanding the development of diseases. Studies in this field have highlighted the different mechanisms that biomass combustion particles activate, which vary depending on the combustion appliances and fuels. In general, particles from conventional combustion appliances are more potent in inducing cytotoxicity, DNA damage, inflammatory responses, and oxidative stress than those from modern appliances. The sensitivity of different cell lines to the toxic effects of biomass combustion particles is also influenced by cell type and culture conditions. One of the main challenges in this field is the considerable variation in sampling strategies, sample processing, experimental conditions, assays, and extraction techniques used in biomass burning PM studies. Advanced culture systems, such as co-cultures and air-liquid interface exposures, can provide more accurate insights into the effects of biomass combustion particles compared to simpler submerged monocultures. This review provides critical insights into the complex field of toxicity from residential biomass combustion emissions, underscoring the importance of continued research and standardisation of methodologies to better understand the associated health hazards and to inform targeted interventions.

Impact of particulate air pollution on airway injury and epithelial plasticity; underlying mechanisms

Air pollution plays an important role in the mortality and morbidity of chronic airway diseases, such as asthma and chronic obstructive pulmonary disease (COPD). Particulate matter (PM) is a significant fraction of air pollutants, and studies have demonstrated that it can cause airway inflammation and injury. The airway epithelium forms the first barrier of defense against inhaled toxicants, such as PM. Airway epithelial cells clear airways from inhaled irritants and orchestrate the inflammatory response of airways to these irritants by secreting various lipid mediators, growth factors, chemokines, and cytokines. Studies suggest that PM plays an important role in the pathogenesis of chronic airway diseases by impairing mucociliary function, deteriorating epithelial barrier integrity, and inducing the production of inflammatory mediators while modulating the proliferation and death of airway epithelial cells. Furthermore, PM can modulate epithelial plasticity and airway remodeling, which play central roles in asthma and COPD. This review focuses on the effects of PM on airway injury and epithelial plasticity, and the underlying mechanisms involving mucociliary activity, epithelial barrier function, airway inflammation, epithelial-mesenchymal transition, mesenchymal-epithelial transition, and airway remodeling.

Off-gassing from firefighter suits (nomex) as an indoor source of BTEXS

The clothes and special equipment of firefighters can be a source of indoor air pollution. Nevertheless, it has not been investigated so far what the scale of the release of various compounds from such materials into the indoor air can be. The following study analysed the results of an experiment involving the passive measurement of concentrations of selected compounds, i.a. benzene, toluene, ethylbenzene, m,p-xylene, o-xylene, styrene, isopropylbenzene and n-propylbenzene (BTEXS) in the air of a room where firefighters' special clothing, which had been previously exposed to emissions from simulated fires, was stored. The study included simulations of fires involving three materials: wood, processed wood (OSB/fibreboard) and a mixture of plastics. After being exposed to the simulated fire environment, special clothing (so-called nomex) was placed in a sealed chamber, where passive collection of BTEXS was carried out using tube-type axial passive samplers and a gas chromatograph. Irrespective of which burned material special clothing was exposed to, the compound emitted into the air most intensively was toluene. Its rate of release from a single nomex ranges from 4.4 to 28.6 μg h-1, while the corresponding rates for the sum of BTEXS are between 9.97 and 44.29 μg h-1.

A Review: Subcritical Water Extraction of Organic Pollutants from Environmental Matrices

Most organic pollutants are serious environmental concerns globally due to their resistance to biological, chemical, and photolytic degradation. The vast array of uses of organic compounds in daily life causes a massive annual release of these substances into the air, water, and soil. Typical examples of these substances include pesticides, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). Since they are persistent and hazardous in the environment, as well as bio-accumulative, sensitive and efficient extraction and detection techniques are required to estimate the level of pollution and assess the ecological consequences. A wide variety of extraction methods, including pressurized liquid extraction, microwave-assisted extraction, supercritical fluid extraction, and subcritical water extraction, have been recently used for the extraction of organic pollutants from the environment. However, subcritical water has proven to be the most effective approach for the extraction of a wide range of organic pollutants from the environment. In this review article, we provide a brief overview of the subcritical water extraction technique and its application to the extraction of PAHs, PCBs, pesticides, pharmaceuticals, and others form environmental matrices. Furthermore, we briefly discuss the influence of key extraction parameters, such as extraction time, pressure, and temperature, on extraction efficiency and recovery.

Wintertime investigation of PM10 concentrations, sources, and relationship with different meteorological parameters

Meteorological factors play a crucial role in affecting air quality in the urban environment. Peshawar is the capital city of the Khyber Pakhtunkhwa province in Pakistan and is a pollution hotspot. Sources of PM10 and the influence of meteorological factors on PM10 in this megacity have yet to be studied. The current study aims to investigate PM10 mass concentration levels and composition, identify PM10 sources, and quantify links between PM10 and various meteorological parameters like temperature, relative humidity (RH), wind speed (WS), and rainfall (RF) during the winter months from December 2017 to February 2018. PM10 mass concentrations vary from 180 - 1071 µg m-3, with a mean value of 586 ± 217 µg m-3. The highest concentration is observed in December, followed by January and February. The average values of the mass concentration of carbonaceous species (i.e., total carbon, organic carbon, and elemental carbon) are 102.41, 91.56, and 6.72 μgm-3, respectively. Water-soluble ions adhere to the following concentration order: Ca2+  > Na+  > K+  > NH4+  > Mg2+. Twenty-four elements (Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Co, Zn, Ga, Ge, As, Se, Kr, Ag, Pb, Cu, and Cd) are detected in the current study by PIXE analysis. Five sources based on Positive Matrix Factorization (PMF) modeling include industrial emissions, soil and re-suspended dust, household combustion, metallurgic industries, and vehicular emission. A positive relationship of PM10 with temperature and relative humidity is observed (r = 0.46 and r = 0.56, respectively). A negative correlation of PM10 is recorded with WS (r =  - 0.27) and RF (r =  - 0.46). This study's results motivate routine air quality monitoring owing to the high levels of pollution in this region. For this purpose, the establishment of air monitoring stations is highly suggested for both PM and meteorology. Air quality standards and legislation need to be revised and implemented. Moreover, the development of effective control strategies for air pollution is highly suggested.

Development of Spatio-Temporal Land Use Regression Models for Fine Particulate Matter and Wood-Burning Tracers in Temuco, Chile

Biomass burning is common in much of the world, and in some areas, residential wood-burning has increased. However, air pollution resulting from biomass burning is an important public health problem. A sampling campaign was carried out between May 2017 and July 2018 in over 64 sites in four sessions, to develop a spatio-temporal land use regression (LUR) model for fine particulate matter (PM) and wood-burning tracers levoglucosan and soluble potassium (Ksol) in a city heavily impacted by wood-burning. The mean (sd) was 46.5 (37.4) μg m-3 for PM2.5, 0.607 (0.538) μg m-3 for levoglucosan, and 0.635 (0.489) μg m-3 for Ksol. LUR models for PM2.5, levoglucosan, and Ksol had a satisfactory performance (LOSOCV R2), explaining 88.8%, 87.4%, and 87.3% of the total variance, respectively. All models included sociodemographic predictors consistent with the pattern of use of wood-burning in homes. The models were applied to predict concentrations surfaces and to estimate exposures for an epidemiological study.

Physicochemical and toxicological properties of wood smoke particulate matter as a function of wood species and combustion condition

Wood burning is a major source of ambient particulate matter (PM) and has been epidemiologically linked to adverse pulmonary health effects, however the impact of fuel and burning conditions on PM properties has not been investigated systematically. Here, we employed our recently developed integrated methodology to characterize the physicochemical and biological properties of emitted PM as a function of three common hardwoods (oak, cherry, mesquite) and three representative combustion conditions (flaming, smoldering, incomplete). Differences in PM and off-gas emissions (aerosol number/mass concentrations; carbon monoxide; volatile organic compounds) as well as inorganic elemental composition and organic carbon functional content of PM0.1 were noted between wood types and combustion conditions, although the combustion scenario exerted a stronger influence on the emission profile. More importantly, flaming combustion PM0.1 from all hardwoods significantly stimulated the promoter activity of Sterile Alpha Motif (SAM) pointed domain containing ETS (E-twenty-six) Transcription Factor (SPDEF) in human embryonic kidney 293 (HEK-293 T) cells, a biomarker for mucin gene expression associated with mucus production in pulmonary diseases. However, no bioactivity was observed for smoldering and incomplete combustion, which was likely driven by differences in the organic composition of PM0.1. Detailed chemical speciation of organic components of wood smoke is warranted to identify the individual compounds that drive specific biological responses.

Cleaning the Flue in Wood-Burning Stoves Is a Key Factor in Reducing Household Air Pollution

In experimental settings, replacing old wood stoves with new wood stoves results in reduced personal exposure to household air pollution. We tested this assumption by measuring PM2.5 and levoglucosan concentrations inside homes and correlated them with wood stove age. Methods: Thirty homes in the Albuquerque, NM area were monitored over a seven-day period using in-home particulate monitors placed in a common living area during the winter months. Real-time aerosol monitoring was performed, and filter samples were analyzed gravimetrically to calculate PM2.5 concentrations and chemically to determine concentrations of levoglucosan. A linear regression model with backward stepwise elimination was performed to determine the factors that would predict household air pollution measures. Results: In this sample, 73.3% of the households used wood as their primary source of heating, and 60% burned daily or almost daily. The mean burn time over the test week was 50 ± 38 h, and only one household burned wood 24/day (168 h). The average PM2.5 concentration (standard deviation) for the 30 homes during the seven-day period was 34.6 µg/m3 (41.3 µg/m3), and median (min, max) values were 15.5 µg/m3 (7.3 µg/m3, 193 µg/m3). Average PM2.5 concentrations in 30 homes ranged from 0−15 μg/m3 to >100 μg/m3. Maximum PM2.5 concentrations ranged from 100−200 μg/m3 to >3000 μg/m3. The levoglucosan levels showed a linear correlation with the total PM2.5 collected by the filters (R2 = 0.92). However, neither mean nor peak PM2.5 nor levoglucosan levels were correlated with the age (10.85 ± 8.54 years) of the wood stove (R2 ≤ 0.07, p > 0.23). The final adjusted linear regression model showed that average PM2.5 was associated with reports of cleaning the flue with a beta estimate of 35.56 (3.47−67.65) and R2 = 0.16 (p = 0.04). Discussion: Cleaning the flue and not the wood stove age was associated with household air pollution indices. Education on wood stove maintenance and safe burning practices may be more important in reducing household air pollution than the purchase of new stoves.

High time-resolution measurements of ultrafine and fine woodsmoke aerosol number and surface area concentrations in biomass burning kitchens: A case study in Western Kenya

Indoor air pollution associated with biomass combustion for cooking remains a significant environmental health challenge in rural regions of sub-Saharan Africa; however, routine monitoring of woodsmoke aerosol concentrations continues to remain sparse. There is a paucity of field data on concentrations of combustion-generated ultrafine particles, which efficiently deposit in the human respiratory system, in such environments. Field measurements of ultrafine and fine woodsmoke aerosol (diameter range: 10-2500 nm) with field-portable diffusion chargers were conducted across nine wood-burning kitchens in Nandi County, Kenya. High time-resolution measurements (1 Hz) revealed that indoor particle number (PN) and particle surface area (PSA) concentrations of ultrafine and fine woodsmoke aerosol are strongly temporally variant, reach exceedingly high levels (PN > 10⁶ /cm³ ; PSA > 10⁴  μm² /cm³ ) that are seldom observed in non-biomass burning environments, are influenced by kitchen architectural features, and are moderately to poorly correlated with carbon monoxide concentrations. In five kitchens, PN concentrations remained above 10⁵ /cm³ for more than half of the day due to frequent cooking episodes. Indoor/outdoor ratios of PN and PSA concentrations were greater than 10 in most kitchens and exceeded 100 in several kitchens. Notably, the use of metal chimneys significantly reduced indoor PN and PSA concentrations.

Development of an Integrated Platform to Assess the Physicochemical and Toxicological Properties of Wood Combustion Particulate Matter

Wood burning contributes to indoor and ambient particulate matter (PM) pollution and has been associated with increased morbidity and mortality. Here, we present an integrated methodology that allows to generate, sample, and characterize wood smoke derived from different moisture contents and representative combustion conditions using pine wood as a model. Flaming, smoldering, and incomplete combustion were assessed for low-moisture pine, whereas both low-moisture pine and high-moisture pine were investigated under flaming conditions. Real-time monitoring of carbon monoxide, volatile organic compounds, and aerosol number concentration/size in wood smoke was performed. The PM was size-fractionated, sampled, and characterized for elemental/organic carbon, organic functional groups, and inorganic elements. Bioactivity of PM was assessed by measuring the sterile alpha motif (SAM) pointed domain containing ETS (E-twenty-six) transcription factor (SPDEF) gene promoter activity in human embryonic kidney 293 (HEK-293T) cells, a biomarker for mucin gene expression. Findings showed that moisture content and combustion condition significantly affected the organic and inorganic elemental composition of PM0.1 as well as its bioactivity. Also, for a given moisture and combustion scenario, PM chemistry and bioactivity differed considerably with PM size. Importantly, PM0.1 from flaming combustion of low-moisture pine contained the highest abundance of the oxygenated saturated aliphatic functional group [H-C-O] and was also biologically most potent in stimulating SPDEF promoter activity, suggesting the role of organic compounds such as carbohydrates and sugar alcohols (that contain [H-C-O]) in driving mucus-related respiratory outcomes. Our platform enables further well-controlled parametric studies using a combination of in vitro and in vivo approaches to link wood burning parameters with acute and chronic inhalation health effects of wood smoke.

Effect of Grit Size on Airborne Particle Concentration and Size Distribution during Oak Wood Sanding

Adverse health effects caused by exposure to airborne particles have been detected in recent years, however there is little knowledge about exposure to ultrafine particles with a diameter <100 nm. In this study, particle number concentration and size distribution in a range of particle diameters from 10 nm to 10 µm were determined during oak wood sanding. A hand-held orbit sander in combination with three types of grit size (P60, 120 and 240) of sandpaper were used. Measurements were obtained using a portable particle size distribution analyzer and an optical particle size spectrometer, carried out at 15-min intervals for each treatment by static sampling in the breathing zone. We also compared the optical particle size spectrometer to the aerosol monitor in order to evaluate the mass concentration of airborne particles in the range of 1 to 10 µm in diameter. Sanding paper with the finest grit, P240, showed a significantly higher number concentration of ultrafine particles, compared with P60 and P120 grits. The differences among particular grit size were statistically significant for microparticles. The size distribution of particles during sanding was not affected by grit size. For each grit size, apparent peak values of ultrafine and microparticle number concentrations were determined at approximately 15 nm, and 0.1 µm, respectively. Optical particle size spectrometer and aerosol monitor showed comparable results of mass concentration for the respirable fraction.

Characterization of in-stack particulate emissions from residential wood hydronic heater appliances under different combustion conditions

In the current work, we provide measurements of size-resolved particle number concentration (PNC), particle mass concentration (PMC), lung-deposited surface area (LDSA), and black carbon (BC) concentration for three biomass fired hydronic heaters during operation in four different combustion conditions. The appliances include one woodchip-fueled hydronic heater and two outdoor cordwood-fueled hydronic heaters. The operating conditions included startup, low output, high output, and burnout. Measurements were made using a custom dilution sampling system and a suite of commercially available, time-resolved, ambient aerosol measurement instrumentation. The PNC, as measured using an Dekati Electrical Low Pressure Impactor+ (ELPI), had operating condition mean values ranging between 4.1 and 52 million particles per cubic centimeter (#/cm³). The highest reported PNC occurred during the startup condition in all cases. Calculating the particle size distribution measured across each operating phase for the same instrument gave geometric mean diameters (d_g) in the range of 0.080-0.256 µm. The largest d_g per appliance was nearly always attributable to the startup condition (for hydronic heater 1, startup d_g ranked second).We did not observe the same trends when we transformed the ELPI PNC to PMC and particle surface area concentration estimates across operating conditions, suggesting PNC and d_g are highly variable. Furthermore, simultaneous measurements of PNC, PMC, and PSAC using instrumentation with different working principles gave varying results, potentially suggesting that particles of different composition and morphology are produced under different combustion conditions.Implications: In this work we compare the results from testing of 3 biomass fired hydronic heaters including one chip-fired appliance and two cordwood-fired appliances. The emissions from these appliances were made across four operating conditions and using three different non-regulatory emissions metrics. This work: describes the difference between chip and cordwood fired units and the effect of operating condition on emissions across the three emissions metrics.

Impact of fueling protocols on emission outcomes for residential wood-fired appliances

Many believe that certification testing of residential wood heat appliances should provide data indicative of installed performance. Operationally, test methods typically only assess steady-state emissions and fail to include other typical conditions for batch appliances such as start-up. From a fueling perspective, protocols should ensure a consistent approach reflecting common use practices. Ensuring representative conditions and accurate quantification of emissions requires assessing the impact of different start-up conditions and whether or not start-up conditions affect appliance operation during start-up and beyond. This study evaluated the impact of modifying fuel piece sizes and configurations using a "smart" wood-fired hydronic heater (WHH) cordwood appliance. The appliance represents technologies using software and oxygen sensors to improve performance. Since the study used a "smart" appliance, the results likely reflect the least amount of variability found in a WHH cordwood appliance. The analysis consisted of a series of tests that involved changing one fuel variable per series, including: (1) kindling fuel arrangement in the firebox; (2) fuel piece size; and (3) the amount of kindling and starter fuel used. A goal of the study was to determine how each variable affects emissions performance during start-up and the following steady state load. Testing used a dual-stage combustion cordwood WHH equipped with external thermal storage. Particulate matter (PM), carbon monoxide (CO), and delivered heating efficiency were measured, and visible emissions from the stack and secondary combustion chamber were observed. Replicate tests were conducted for each protocol series to evaluate WHH performance reproducibility. These tests found that for a low-mass staged combustion WHH with external thermal storage, the use of different fueling protocols can substantially affect PM and CO emissions.Implications: As test methods move to incorporate measurements beyond steady-state emissions, fueling protocols must be assessed to determine (1) if they reflect typical field procedures and (2) the impact of start-up procedures on the complete test run. This paper assessed how changing start-up conditions affected run variability and PM emission impacts.

Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances-Part 2: Particle number and size

The use of wood as a fuel for home heating is a concern from an environmental health and safety perspective as biomass combustion appliances emit high concentrations of particulate matter. Wood burning significantly contributes to wintertime particulate matter concentrations in many states in the northern United States. Of particular concern are outdoor wood-fired hydronic heaters. These devices are concerning as they tend to have very large combustion chambers and typical use patterns can result in long periods of low output, which result in an increased particulate matter emission rate relative to high heat output operating conditions. In this study, the performance of two hydronic heaters operating under different combustion conditions, including four different heat output categories approximately corresponding to categories I-IV denoted in Environmental Protection Agency Method 28 Outdoor Wood-fired Hydronic Heaters, and during start-up and reloading events were investigated. Measurements of flue gas particulate number concentration and size for particles with aerodynamic diameters between 0.006 and 10 µm were made using a dilution sampling system. The measured particle number concentration in the flue gas was between 0.71 and 420 million particles per cubic centimeter and was dependent on fuel loading and heat output. For each hydronic heater tested, the highest average particle concentration was found at the beginning of each test during the cold-start condition. Additionally, the majority of the particles had aerodynamic diameters less than 0.100 µm (particles of this size made up between 64% and 97% of all particles) and less than 1% of all particles had aerodynamic diameters greater than 1 µm for all phases. For particles in the accumulation mode, between 0.100 and 1 µm, the mean particle diameter was dependent on fuel loading and heat output.Implications: In this work, we provide information on the particle number concentration and particle size of emissions from outdoor cord- wood-fired hydronic heaters. Wood-fired hydronic heater data is sparsely available compared to wood stove data. Thus, additional data from this source help to inform the work of modelers and policy makers interested in hydronic heaters. The test method used in this work is also novel, as it is more inclusive of real-world use cases than the current certification method. Our data helps to validate the test method and allows for comparisons between real-world use case scenarios, and idealized test cases.

Sub-micron particle number emission from residential heating systems: A comparison between conventional and condensing boilers fueled by natural gas and liquid petroleum gas, and pellet stoves

Pollutant emissions from residential heating systems represent a main concern in terms of outdoor air quality. Differently from other pollutants, sub-micron particle emission from heating systems has not yet been exhaustively characterized by the scientific literature, with limited data available, in particular, for gas-fueled boilers. In the present paper, an experimental campaign to measure the sub-micron particle number concentrations and distributions at the stack of different automatically-fed small-scale heating systems (conventional and condensing boilers fueled by natural gas and liquid petroleum gas, and pellet stoves) was performed. Based on the measured concentrations, corresponding emission rates and emission factors were also estimated. The results of the experimental campaign revealed that the highest concentrations were measured for pellet stoves (median value >10⁷ part. m^-3), whereas conventional (about 1 × 10⁶ part. m^-3) and condensing boilers (<10⁶ part. m^-3) presented much lower concentrations. No effect of the fuel (natural gas, liquid petroleum gas) on the total concentration measured at the stack of boilers was recognized, whereas a smaller distribution mode (at 10 nm) was measured for gas-fired boilers. Because of the particle concentration values, the highest particle emission rates and factors were the pellet stove ones (median values of 2.1 × 10¹⁵ part. h^-1 and 8.4 × 10¹³ part. kWh^-1, respectively), whereas emission rates for conventional and condensing boilers were about 5 × 10¹³ part. h^-1 and 2 × 10¹³ part. h^-1, respectively. The estimated emission factors were also adopted to perform a simplified evaluation of the relative contributions of the investigated automatically-fed small-scale heating systems in terms of particle number on a national scale (Italy): we obtained that the pellet stove contribution is the main one as it accounts for 87% of total emissions of particle number for heating purpose.

PM2.5 Pollution Levels and Chemical Components at Teahouses along the Poon Hill Trek in Nepal

Unhealthy levels of fine particulate matter (PM2.5) from the local burning of solid fuels, and from regional transport of pollutants, remain a major public health problem in the Himalayan foothill villages in Nepal. Teahouses (i.e., mountain lodges) along popular hiking trails in the lower Himalayas commonly use wood as the primary energy source for heating; however, little is known about teahouse air quality. The purpose of this study was to characterize the levels and chemical constituents of indoor and ambient PM2.5 at three villages along the Poon Hill circuit trek in the Annapurna Conservation Area in Nepal. A convenience sample of five PM2.5 measurements was collected with portable MicroPEM V.3.2A exposure monitors. Filters were analyzed for black and brown carbon using integrating sphere optical transmittance and 33 elemental constituents using energy-dispersive X-ray fluorescence. Median indoor PM2.5 over the sampling period was 41.3 µg/m3, whereas median ambient PM2.5 over the sampling period was 34.7 µg/m3. Chemical species associated with wood smoke, such as potassium (GM = 0.88 µg/m3), predominated. High indoor and ambient PM2.5 levels may pose a significant occupational health risk to teahouse workers, who may experience chronic exposures during trekking seasons. Our findings warrant additional research to characterize teahouse air pollution exposures more fully and to evaluate intervention measures.

Impacts of Fine Particulate Matter From Wildfire Smoke on Respiratory and Cardiovascular Health in California

Increases in wildfire activity across the Western US pose a significant public health threat. While there is evidence that wildfire smoke is detrimental for respiratory health, the impacts on cardiovascular health remain unclear. This study evaluates the association between fine particulate matter (PM_2.5) from wildfire smoke and unscheduled cardiorespiratory hospital visits in California during the 2004-2009 wildfire seasons. We estimate daily mean wildfire-specific PM_2.5 with Goddard Earth Observing System-Chem, a global three-dimensional model of atmospheric chemistry, with wildfire emissions estimates from the Global Fire Emissions Database. We defined a "smoke event day" as cumulative 0-1-day lag wildfire-specific PM_2.5 ≥ 98th percentile of cumulative 0-1 lag day wildfire PM_2.5. Associations between exposure and outcomes are estimated using negative binomial regression. Results indicate that smoke event days are associated with a 3.3% (95% CI: [0.4%, 6.3%]) increase in visits for all respiratory diseases and a 10.3% (95% CI: [2.3%, 19.0%]) increase for asthma specifically. Stratifying by age, we found the largest effect for asthma among children ages 0-5 years. We observed no significant association between exposure and overall cardiovascular disease, but stratified analyses revealed increases in visits for all cardiovascular, ischemic heart disease, and heart failure among non-Hispanic white individuals and those older than 65 years. Further, we found a significant interaction between smoke event days and daily average temperature for all cardiovascular disease visits, suggesting that days with high wildfire PM_2.5 concentrations and high temperatures may pose greater risk for cardiovascular disease. These results suggest substantial increases in adverse outcomes from wildfire smoke exposure and indicate the need for improved prevention strategies and adaptations to protect vulnerable populations.

Saccharides as Particulate Matter Tracers of Biomass Burning: A Review

The adverse effects of atmospheric particulate matter (PM) on health and ecosystems, as well as on meteorology and climate change, are well known to the scientific community. It is therefore undeniable that a good understanding of the sources of PM is crucial for effective control of emissions and to protect public health. One of the major contributions to atmospheric PM is biomass burning, a practice used both in agriculture and home heating, which can be traced and identified by analyzing sugars emitted from the combustion of cellulose and hemicellulose that make up biomass. In this review comparing almost 200 selected articles, we highlight the most recent studies that broaden such category of tracers, covering research publications on residential wood combustions, open-fire or combustion chamber burnings and ambient PM in different regions of Asia, America and Europe. The purpose of the present work is to collect data in the literature that indicate a direct correspondence between biomass burning and saccharides emitted into the atmosphere with regard to distinguishing common sugars attributed to biomass burning from those that have co-causes of issue. In this paper, we provide a list of 24 compounds, including those most commonly recognized as biomass burning tracers (i.e., levoglucosan, mannosan and galactosan), from which it emerges that monosaccharide anhydrides, sugar alcohols and primary sugars have been widely reported as organic tracers for biomass combustion, although it has also been shown that emissions of these compounds depend not only on combustion characteristics and equipment but also on fuel type, combustion quality and weather conditions. Although it appears that it is currently not possible to define a single compound as a universal indicator of biomass combustion, this review provides a valuable tool for the collection of information in the literature and identifies analytes that can lead to the determination of patterns for the distribution between PM generated by biomass combustion.

“On-Line” Heating Emissions Based on WRF Meteorology—Application and Evaluation of a Modeling System over Greece

The main objective of the present study is the development of an “on-line” heating emissions modeling system based on simulated meteorological data and its integration with air quality modeling systems in order to improve their accuracy. The WRF-CAMx air quality modeling system is applied over Greece for the cold period of 2015 (January–April, October–December) for two emissions scenarios: using the (a) “on-line” heating emissions based on WRF meteorology and (b) “static” heating emissions based on static temporal profiles. The monthly variation in total “on-line” heating emissions followed the temporal pattern of the air temperature over Greece, leading to the highest heating emissions in January and February, while higher differences in emissions between winter and spring/autumn months were identified in comparison with the static ones. The overall evaluation of the WRF-CAMx modeling system using the “on-line” heating emissions revealed satisfactory model performance for the mean daily air quality levels. The comparison between the simulated and observed mean monthly concentrations revealed an improvement in the pattern of mean monthly concentrations for the “on-line” scenario. Higher values of the index of agreement and correlation for the mean daily values were also identified for the “on-line” scenario in most monitoring sites.

Short-term associations between barbecue fumes and respiratory health in young adults

BACKGROUND

Epidemiological studies have associated biomass combustion with (respiratory) morbidity and mortality, primarily in indoor settings. Barbecuing results in high outdoor air pollution exposures, but the health effects are unknown.

OBJECTIVE

The objective was to investigate short-term changes in respiratory health in healthy adults, associated with exposure to barbecue fumes.

METHODS

16 healthy, adult volunteers were exposed to barbecue smoke in outdoor air in rest during 1.5 h, using a repeated-measures design. Major air pollutants were monitored on-site, including particulate matter <2.5 μm (PM_2.5), particle number concentrations (PNC) and black- and brown carbon. At the same place and time-of-day, subjects participated in a control session, during which they were not exposed to barbecue smoke. Before and immediately after all sessions lung function was measured. Before, immediately after, 4- and 18 h post-sessions nasal expression levels of interleukin (IL)-8, IL6 and Tumor Necrosis Factor alpha (TNFα) were determined in nasal swabs, using quantitative polymerase chain reaction. Associations between major air pollutants, lung function and inflammatory markers were assessed using mixed linear regression models.

RESULTS

High PM_2.5 levels and PNCs were observed during barbecue sessions, with averages ranging from 553 to 1062 μg/m³ and 109,000-463,000 pt/cm³, respectively. Average black- and brown carbon levels ranged between 4.1-13.0 and 5.0-16.2 μg/m³. A 1000 μg/m³ increase in PM_2.5 was associated with 2.37 (0.97, 4.67) and 2.21 (0.98, 5.00) times higher expression of IL8, immediately- and 18 h after exposure. No associations were found between air pollutants and lung function, or the expression of IL6 or TNFα.

DISCUSSION

Short-term exposure to air pollutants emitted from barbecuing was associated with a mild respiratory response in healthy young adults, including prolonged increase in nasal IL8 without a change in lung function and other measured inflammatory markers. The results might indicate prolonged respiratory inflammation, due to short-term exposure to barbecue fumes.

Determinants of Solid Fuel Use and Emission Risks among Households: Insights from Limpopo, South Africa

Emissions from residential solid fuels reduce ambient air quality and cause indoor air pollution resulting in adverse human health. The traditional solid fuels used for cooking include coal, straws, dung, and wood, with the latter identified as the prevalent energy source in developing countries. Emissions from such fuel sources appear to be significant hazards and risk factors for asthma and other respiratory diseases. This study aimed at reporting factors influencing the choice of dominant solid fuel for cooking and determine the emission risk from such solid fuel in three villages of Phalaborwa, Limpopo province, South Africa. The study used descriptive analysis to show the relationship between the socio-economic variables and the choice of cooking fuel at the household level. Multiple correspondence analysis (MCA) was used further to detect and represent underlying structures in the choice of dominant fuels. MCA shows the diversity and existing relationship of how variables are related analytically and graphically. Generalised linear logistic weight estimation procedure (WLS) was also used to investigate the factors influencing choice of fuel used and the inherent emission risks. In the three villages, wood was the prevalent cooking fuel with 76.8% of participant households using it during the summer and winter seasons. Variables such as low monthly income, level of education, and system of burning are revealed as strong predictors of wood fuel usage. Moreover, income, water heating energy, types of wood, and number of cooking hours are significant (p ≤ 0.05) in influencing emission from wood fuel in the community. A notable conclusion is that variables such as income, education status and system of burning are determinants of wood fuel usage in the three villages, while income, water heating energy, types of wood and number of hours influence vulnerability to household emission and possible health risks in the use of solid energy sources.

FT-ICR mass spectrometry for molecular characterization of water-insoluble organic compounds in winter atmospheric fine particulate matters

Water-insoluble organic compounds (WIOCs) are an important fraction of atmospheric fine particulate matters (PM_2.5), which could affect the climate system and threaten human health potentially. In this study, molecular characterization of WIOCs in PM_2.5 were investigated by 15 T Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) with atmospheric pressure photoionization (APPI) source in positive ion mode. A total of 2573 and 1875 molecular formulas were identified in WIOCs extracted by dichloromethane, which were collected in hazy and normal days, respectively. The identified molecular formulas were further classified into four major subgroups, including CH, CHN, CHO and CHNO compounds. CHO compounds predominated in WIOCs, accounting for more than 60% in both samples. CHNO compounds (26.6%) and CH compounds (16.1%) were the second highest subgroups in WIOCs from the hazy days and normal days, respectively. The relative abundance and number of nitro-substituted aromatic compounds were significantly higher in hazy days than in normal days. The molecular composition of WIOCs was more complex in hazy days while more aromatic compounds were identified in normal days.

The effect of national protest in Ecuador on PM pollution

Particulate matter (PM) accounts for millions of premature deaths in the human population every year. Due to social and economic inequality, growing human dissatisfaction manifests in waves of strikes and protests all over the world, causing paralysis of institutions, services and circulation of transport. In this study, we aim to investigate air quality in Ecuador during the national protest of 2019, by studying the evolution of PM2.5 (PM ≤ 2.5 µm) concentrations in Ecuador and its capital city Quito using ground based and satellite data. Apart from analyzing the PM2.5 evolution over time to trace the pollution changes, we employ machine learning techniques to estimate these changes relative to the business-as-usual pollution scenario. In addition, we present a chemical analysis of plant samples from an urban park housing the strike. Positive impact on regional air quality was detected for Ecuador, and an overall - 10.75 ± 17.74% reduction of particulate pollution in the capital during the protest. However, barricade burning PM peaks may contribute to a release of harmful heavy metals (tire manufacture components such as Co, Cr, Zn, Al, Fe, Pb, Mg, Ba and Cu), which might be of short- and long-term health concerns.

Chemical Composition of PM2.5 in Wood Fire and LPG Cookstove Homes of Nepali Brick Workers

Household air pollution is a major cause of morbidity and mortality worldwide, largely due to particles ≤ 2.5 µm (PM2.5). The toxicity of PM2.5, however, depends on its physical properties and chemical composition. In this cross-sectional study, we compared the chemical composition of PM2.5 in brick workers’ homes (n = 16) based on use of wood cooking fire or liquefied petroleum gas (LPG) cookstoves. We collected samples using RTI International particulate matter (PM) exposure monitors (MicroPEMs). We analyzed filters for 33 elements using energy-dispersive X-ray fluorescence and, for black (BC) and brown carbon (BrC), integrating sphere optical transmittance. Wood fire homes had significantly higher concentrations of BC (349 µg/m3) than LPG homes (6.27 µg/m3, p < 0.0001) or outdoor air (5.36 µg/m3, p = 0.002). Indoor chlorine in wood fire homes averaged 5.86 µg/m3, which was approximately 34 times the average level in LPG homes (0.17 µg/m3, p = 0.0006). Similarly, potassium in wood fire homes (4.17 µg/m3) was approximately four times the level in LPG homes (0.98 µg/m3, p = 0.001). In all locations, we found aluminum, calcium, copper, iron, silicon, and titanium in concentrations exceeding those shown to cause respiratory effects in other studies. Our findings suggest the need for multi-faceted interventions to improve air quality for brick workers in Nepal.

Toxicity of Water- and Organic-Soluble Wood Tar Fractions from Biomass Burning in Lung Epithelial Cells

Widespread smoke from wildfires and biomass burning contributes to air pollution and the deterioration of air quality and human health. A common and major emission of biomass burning, often found in collected smoke particles, is spherical wood tar particles, also known as "tar balls". However, the toxicity of wood tar particles and the mechanisms that govern their health impacts and the impact of their complicated chemical matrix are not fully elucidated. To address these questions, we generated wood tar material from wood pyrolysis and isolated two main subfractions: water-soluble and organic-soluble fractions. The chemical characteristics as well as the cytotoxicity, oxidative damage, and DNA damage mechanisms were investigated after exposure of A549 and BEAS-2B lung epithelial cells to wood tar. Our results suggest that both wood tar subfractions reduce cell viability in exposed lung cells; however, these fractions have different modes of action that are related to their physicochemical properties. Exposure to the water-soluble wood tar fraction increased total reactive oxygen species production in the cells, decreased mitochondrial membrane potential (MMP), and induced oxidative damage and cell death, probably through apoptosis. Exposure to the organic-soluble fraction increased superoxide anion production, with a sharp decrease in MMP. DNA damage is a significant process that may explain the course of toxicity of the organic-soluble fraction. For both subfractions, exposure caused cell cycle alterations in the G2/M phase that were induced by upregulation of p21 and p16. Collectively, both subfractions of wood tar are toxic. The water-soluble fraction contains chemicals (such as phenolic compounds) that induce a strong oxidative stress response and penetrate living cells more easily. The organic-soluble fraction contained more polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAHs and induced genotoxic processes, such as DNA damage.

Concentrations, sizes distributions, and seasonal variations of ambient air pollutants (particulates, trace metals) in Daya/Xitun District, Taichung, Central Taiwan: a case study at Taichung Science Park

Taichung Science Park in central Taiwan releases ambient air pollutants to the atmosphere. This issue has attracted much attention over the past few years. This study concerns seasonal concentrations of atmospheric particles and metallic elements and particle size distributions. A M.O.U.D.I sampler is used at a Taichung Science Park sampling site to obtain relevant data. Fe, followed by Al, had the highest average metallic element concentrations in particles of various sizes (PM₁₈, PM₁₀, PM_2.5, PM₁ and PM_<1(0.3)); Cd had the lowest. The average concentrations of metallic elements in particles of various sizes were lowest in the summer. Fe, Al and Cr had the three highest concentrations among all metallic elements for all particles sizes in all seasons. Ambient air particulate pollutants (crustal and anthropogenic metallic elements) were released from a single emission source at Taichung Science Park site.

Numerical investigation of the effect of air supply on cook stove performance

Objectives: In a domestic biomass cook stove, the air supply plays a significant role in improving the overall combustion characteristics. The present research aims to numerically investigate the effect of air supply, division of air intake into primary and secondary air, and its optimization. > In a domestic biomass cook stove, the air supply plays a significant role in improving the overall combustion characteristics. The present research aims to numerically investigate the effect of air supply, division of air intake into primary and secondary air, and its optimization. Methods: The geometries of cook stove combustion chamber were prepared and simulated using species transport model with eddy-dissipation turbulent mixing. The stoichiometric amount of air was split into different ratios varying from 50:50 to 10:90 and simulations were carried out for each case. The computational model was validated and the concentration of CO2, H2O, O2, wood volatile and resultant temperature were compared and analyzed. Results: Species transport in the form of conservation of mass along with momentum conservation and energy conservation gave the spatial distribution of resultant species and spatial temperature distribution. The computational domain with feedstock inlet corresponding to the pyrolysis regime has yielded good results compared to that in the front. In this domain, the primary to secondary air ratio of 50:50 showed the best results due to the dominance of primary air utilization and, thus, less secondary air use even at higher elevations. With the maximum temperature near 1300 K, maximum relative CO2 production, and maximum feedstock utilization, the primary to secondary air ratio of 50:50 observed to be optimum. Conclusions: Due to the adequate intermixing of reactant species and uniform diffusion of product species along the combustion chamber's height, the computational domain with feedstock inlet corresponding to the pyrolysis regime has shown realistic conditions. The temperature profile and mole fraction of various species, thus obtained, can be used to design an efficient cook stove as the cross-section and dimensions of the combustion chamber and chimney relates to approach the desired division of air.

Synergistic effects of carbon nanoparticle-Cr-Pb in PM2.5 cause cell cycle arrest via upregulating a novel lncRNA NONHSAT074301.2 in human bronchial epithelial cells

Inhalation of carcinogenic PM_2.5 particles is a severe threat to all the people in both developing and developed nations. However, which components of PM_2.5 and how they perturb human cells to cause various diseases are still not understood. Here, employing a reductionism approach, we revealed that one of the crucial toxic and pathogenic mechanisms of PM_2.5 was the blocking of human bronchial cell cycle through upregulation of a novel long non-coding RNA NONHSAT074301.2 by carbon particles with payloads of Cr(VI) and Pb²⁺. We also discovered that NONHSAT074301.2 is a key regulatory molecule controlling cell cycle arrest at G2/M phase. This work highlights cellular function and molecular signaling events investigations using a 16-membered combinational model PM_2.5 library which contain carbon particles carrying four toxic pollutants in all possible combinations at environmental relevant concentrations. This work demonstrates a very powerful methodology to elucidate mechanisms at molecular level and help unlock the "black box" of PM_2.5-induced toxicities.

Concentration-dependent health effects of air pollution in controlled human exposures

BACKGROUND

Air pollution is a leading contributor to premature mortality worldwide and is often represented by particulate matter (PM), a key contributor to its harmful health effects. Concentration-response relationships are useful for quantifying the effects of air pollution in relevant populations and in considering potential effect thresholds. Controlled human exposures can provide data on acute effects and concentration-response relationships that complement epidemiological studies.

OBJECTIVES

We examined PM concentration-responses after controlled human air pollution exposures to examine exposure-response markers, assess effect modifiers, and identify potential effect thresholds.

METHODS

We reviewed primary research from published controlled human exposure studies where responses were reported at multiple target PM concentrations or summarized per unit change in PM to identify concentration-dependent effects.

RESULTS

Of the 191 publications identified through PubMed and supplementary searches, 31 were eligible. Eligible studies collectively represented four pollutant models: concentrated ambient particles, engineered carbon nanoparticles, diesel exhaust, and woodsmoke. We identified concentration-dependent effects on oxidative stress markers, inflammation, and cardiovascular function that overlapped across different pollutants. Metabolic syndrome and glutathione s-transferase mu 1 genotype were identified as potential effect modifiers.

DISCUSSION

Improved understanding of concentration-response relationships is integral to biomonitoring and mitigation of health effects through impact assessment and policy. Although we identified potential concentration-response markers, thresholds, and modifiers, our conclusions on these relationships were limited by a dearth of eligible publications, considerable variability in methodology, and inconsistent reporting standards between studies. More research is required to validate these observations. We recommend that future studies harmonize estimate reporting to facilitate the identification of robust response markers across research and applied settings.

Health measures of Eeyouch (Cree) who are eligible to participate in the on-the-land Income Security Program in Eeyou Istchee (northern Quebec, Canada)

BACKGROUND

Participation in on-the-land programs that encourage traditional cultural activities may improve health and well-being. The Income Security Program (ISP) - a financial incentive-based on-the-land program - for Eeyouch (Cree) hunters and trappers in Eeyou Istchee was created as a result of the 1975 James Bay and Northern Quebec Agreement to help mitigate the effects of hydroelectric development on the Cree people of northern Quebec, Canada. Beyond the ISP's financial incentives, little is known about the health measures of those who are eligible to participate in the ISP (i.e. spent ≥120 days on-the-land during the previous year). Therefore, this paper's objective was to assess the health measures of northern Quebec Cree, who were eligible for participation in the ISP.

METHODS

Using participant data (n = 545) compiled from the Nituuchischaayihtitaau Aschii Multi-Community Environment-and-Health Study, we assessed 13 different health measures in generalized linear models with the independent variable being the eligibility to participate in the ISP.

RESULTS

Participants in the present study who were eligible for the ISP had significantly higher levels of vigorous and moderate activity per week, and higher concentrations of omega-3 polyunsaturated fatty acids in the blood compared to those ineligible for the ISP (i.e. spent ≤119 days on-the-land during the previous year). Encouragingly, following model adjustment for age and sex, participants eligible for the ISP did not have higher blood concentrations of mercury than those who were not eligible for the ISP.

CONCLUSIONS

Our results suggest that the participants eligible for participation in the ISP are likely to be healthier than those who are ineligible to participate - and are promising for on-the-land programs for Indigenous peoples beyond a financial incentive - with no apparent higher risk of increasing contaminant body burden through traditional on-the-land-activities (e.g. fish consumption).

Study of Emissions from Domestic Solid-Fuel Stove Combustion in Ireland

Solid-fuel stoves are at the heart of many homes not only in developing nations, but also in developed regions where there is significant deployment of such heating appliances. They are often operated inefficiently and in association with high emission fuels like wood. This leads to disproportionate air pollution contributions. Despite the proliferation of these appliances, an understanding of particulate matter (PM) emissions from these sources remains relatively low. Emissions from five solid fuels are quantified using a "conventional" and an Ecodesign stove. PM measurements are obtained using both "hot filter" sampling of the raw flue gas, and sampling of cooled, diluted flue gas using an Aerosol Chemical Speciation Monitor and AE33 aethalometer. PM emissions factors (EF) derived from diluted flue gas incorporate light condensable organic compounds; hence they are generally higher than those obtained with "hot filter" sampling, which do not. Overall, the PM EFs ranged from 0.2 to 108.2 g GJ^-1 for solid fuels. The PM EF determined for a solid fuel depends strongly on the measurement method employed and on user behavior, and less strongly on secondary air supply and stove type. Kerosene-based firelighters were found to make a disproportionately high contribution to PM emissions. Organic aerosol dominated PM composition for all fuels, constituting 50-65% of PM from bituminous and low-smoke ovoids, and 85-95% from torrefied olive stone (TOS) briquettes, sod peat, and wood logs. Torrefied biomass and low-smoke ovoids were found to yield the lowest PM emissions. Substituting these fuels for smoky coal, peat, and wood could reduce PM_2.5 emissions by approximately 63%.

Toxicity of selected airborne nitrophenols on eukaryotic cell membrane models

Nitroaromatics belong to the group of toxic components of aerosol particles and atmospheric hydrometeors that enter the atmosphere through biomass burning and fuel combustion. In the present work, we report on the cytotoxic effects of a 2-, 3- and 4-nitrophenol mixture on a model eukaryotic-like cell membrane and compared it with in vitro cellular models BEAS-2B (immortalized bronchial epithelial cells) and A549 (cancerous alveolar epithelial cells). A selected model biomembrane comprised of DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine), DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) was studied. The electrochemical-based method, combined with atomic force microscopy (AFM) and phase-contrast microscopy imaging, allowed to get insights into the mechanism of cellular function disruption caused by airborne nitrophenols. The efficacy of the method is supported by the data obtained from in vitro experiments performed on cell models. The nitrophenol mixture exhibited cytotoxic effects at concentrations above 100 μg mL^-1, as demonstrated by phase-contrast microscopy in real lung cell lines. Electrochemical impedance spectroscopy (EIS) revealed the formation of membrane defects at a nitrophenol concentration of 200 μg mL^-1. AFM imaging confirmed the model membrane disintegration and phospholipids rearrangement in the presence of nitrophenols. These observations indicate that particle-bound nitrophenols induce substantial changes in cell membranes and make them more permeable to aerosol, resulting in major cellular damage in the lungs when inhaled. The study provides initial evidence of cellular membrane damage induced by three important nitrated phenols present in the environment.

A Review on the Occurrence and Analytical Determination of PAHs in Olive Oils

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous environmental and processing contaminants, which may contaminate vegetable oils due to atmospheric fall-out or bad production practices. Due to their carcinogenic and toxic effects, surveillance schemes and mitigation strategies are needed to monitor human exposure to PAHs. In particular, due to the lipophilic nature of these substances, edible oils may present unsafe levels of these compounds. Among these, olive oil, and in particular extra virgin olive oil, is a high-value commodity, also known for its health benefits. Therefore, the occurrence of contaminants in this product is not only of health concern but also causes economic and image damage. In this review, an overview of the occurrence of PAHs in all categories of olive oil is provided, as well as a description of the official methods available and the analytical developments in the last 10 years.

Heterogeneous Urban Exposures and Prevalent Hypertension in the Helsinki Capital Region, Finland

Urban dwellers are simultaneously exposed to several environmental health risk factors. This study aimed to examine the relationship between long-term exposure to fine particulate matter (PM_2.5, diameter < 2.5 µm) of residential-wood-burning and road-traffic origin, road-traffic noise, green space around participants’ homes, and hypertension. In 2015 and 2016, we conducted a survey of residents of the Helsinki Capital Region to determine their perceptions of environmental quality and safety, lifestyles, and health statuses. Recent antihypertensive medication was used as an indicator of current hypertensive illness. Individual-level exposure was estimated by linking residential coordinates with modelled outdoor levels of wood-smoke- and traffic-related PM_2.5, road-traffic noise, and coverage of natural spaces. Relationships between exposure and hypertension were modelled using multi-exposure and single-exposure binary logistic regression while taking smooth functions into account. Twenty-eight percent of the participants were current users of antihypertensive medication. The odds ratios (95% confidence interval) for antihypertensive use were 1.12 (0.78–1.57); 0.97 (0.76–1.26); 0.98 (0.93–1.04) and 0.99 (0.94–1.04) for wood-smoke PM_2.5, road-traffic PM_2.5, road-traffic noise, and coverage of green space, respectively. We found no evidence of an effect of the investigated urban exposures on prevalent hypertension in the Helsinki Capital Region.

Ambient particulate matter source apportionment using receptor modelling in European and Central Asia urban areas

This work presents the results of a PM2.5 source apportionment study conducted in urban background sites from 16 European and Asian countries. For some Eastern Europe and Central Asia cities this was the first time that quantitative information on pollution source contributions to ambient particulate matter (PM) has been performed. More than 2200 filters were sampled and analyzed by X-Ray Fluorescence (XRF), Particle-Induced X-Ray Emission (PIXE), and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) to measure the concentrations of chemical elements in fine particles. Samples were also analyzed for the contents of black carbon, elemental carbon, organic carbon, and water-soluble ions. The Positive Matrix Factorization receptor model (EPA PMF 5.0) was used to characterize similarities and heterogeneities in PM2.5 sources and respective contributions in the cities that the number of collected samples exceeded 75. At the end source apportionment was performed in 11 out of the 16 participating cities. Nine major sources were identified to have contributed to PM2.5: biomass burning, secondary sulfates, traffic, fuel oil combustion, industry, coal combustion, soil, salt and "other sources". From the averages of sources contributions, considering 11 cities 16% of PM2.5 was attributed to biomass burning, 15% to secondary sulfates, 13% to traffic, 12% to soil, 8.0% to fuel oil combustion, 5.5% to coal combustion, 1.9% to salt, 0.8% to industry emissions, 5.1% to "other sources" and 23% to unaccounted mass. Characteristic seasonal patterns were identified for each PM2.5 source. Biomass burning in all cities, coal combustion in Krakow/POL, and oil combustion in Belgrade/SRB and Banja Luka/BIH increased in Winter due to the impact of domestic heating, whereas in most cities secondary sulfates reached higher levels in Summer as a consequence of the enhanced photochemical activity. During high pollution days the largest sources of fine particles were biomass burning, traffic and secondary sulfates.

Controlled human exposures to wood smoke: a synthesis of the evidence

Background

Exposure to particulate matter (PM) from wood combustion represents a global health risk, encompassing diverse exposure sources; indoor exposures due to cooking in developing countries, ambient PM exposures from residential wood combustion in developed countries, and the predicted increasing number of wildfires due to global warming. Although physicochemical properties of the PM, as well as the exposure levels vary considerably between these sources, controlled human exposure studies may provide valuable insight to the harmful effects of wood smoke (WS) exposures in general. However, no previous review has focused specifically on controlled human exposure studies to WS.

Results

The 22 publications identified, resulting from 12 controlled human studies, applied a range of combustion conditions, exposure levels and durations, and exercise components in their WS exposure. A range of airway, cardiovascular and systemic endpoints were assessed, including lung function and heart rate measures, inflammation and oxidative stress. However, the possibility for drawing general conclusions was precluded by the large variation in study design, resulting in differences in physicochemical properties of WS, effective dose, as well as included endpoints and time-points for analysis. Overall, there was most consistency in reported effects for airways, while oxidative stress, systemic inflammation and cardiovascular physiology did not show any clear patterns.

Conclusion

Based on the reviewed controlled human exposure studies, conclusions regarding effects of acute WS exposure on human health are premature. Thus, more carefully conducted human studies are needed. Future studies should pay particular attention to the applied WS exposure, to assure that both exposure levels and PM properties reflect the research question.

Influence of Woodsmoke Exposure on Molecular Mechanisms Underlying Alzheimer's Disease: Existing Literature and Gaps in Our Understanding

Woodsmoke poses a significant health risk as a growing component of ambient air pollution in the United States. While there is a long history of association between woodsmoke exposure and diseases of the respiratory, circulatory, and cardiovascular systems, recent evidence has linked woodsmoke exposure to cognitive dysfunction, including Alzheimer’s disease dementia. Alzheimer’s disease is a progressive neurodegenerative disorder with largely idiopathic origins and no known cure. Here, we explore the growing body of literature which relates woodsmoke-generated and ambient air pollution particulate matter exposure to Alzheimer’s disease (AD) onset or exacerbation, in the context of an inflammation-centric view of AD. Epigenetic modifications, specifically changes in DNA methylation patterns, are well documented following woodsmoke exposure and have been shown to influence disease-favoring inflammatory cascades, induce oxidative stress, and modulate the immune response in vitro, in vivo, and in humans following exposure to air pollution. Though the current status of the literature does not allow us to draw definitive conclusions linking these events, this review highlights the need for additional work to fill gaps in our understanding of the directionality, causality, and susceptibility throughout the life course.

Exposure to wood smoke particles leads to inflammation, disrupted proliferation and damage to cellular structures in a human first trimester trophoblast cell line

The ongoing transition to renewable fuel sources has led to increased use of wood and other biomass fuels. The physiochemical characteristics of biomass combustion derived aerosols depends on appliances, fuel and operation procedures, and particles generated during incomplete combustion are linked to toxicity. Frequent indoor wood burning is related to severe health problems such as negative effects on airways and inflammation, as well as chronic hypoxia and pathological changes in placentas, adverse pregnancy outcome, preterm delivery and increased risk of preeclampsia. The presence of combustion-derived black carbon particles at both the maternal and fetal side of placentas suggests that particles can reach the fetus. Air pollution particles have also been shown to inhibit trophoblast migration and invasion, which are vital functions for the development of the placenta during the first trimester. In this study we exposed a placental first trimester trophoblast cell line to wood smoke particles emitted under Nominal Burn rate (NB) or High Burn rate (HB). The particles were visible inside exposed cells and localized to the mitochondria, causing ultrastructural changes in mitochondria and endoplasmic reticulum. Exposed cells showed decreased secretion of the pregnancy marker human chorionic gonadotropin, increased secretion of IL-6, disrupted membrane integrity, disrupted proliferation and contained specific polycyclic aromatic hydrocarbons (PAHs) from the particles. Taken together, these results suggest that wood smoke particles can enter trophoblasts and have detrimental effects early in pregnancy by disrupting critical trophoblast functions needed for normal placenta development and function. This could contribute to the underlying mechanisms leading to pregnancy complications such as miscarriage, premature birth, preeclampsia and/or fetal growth restriction. This study support the general recommendation that more efficient combustion technologies and burning practices should be adopted to reduce some of the toxicity generated during wood burning.

Wood smoke black carbon from Indigenous traditional cultural activities in a subarctic Cree community

Indoor concentrations of black carbon (BC) were measured when wood was burned for traditional cultural activities in a study in a Cree community located in subarctic Canada. The study also included an intervention using a propane-fuelled heater to mitigate in situ BC. Mass concentrations of BC were measured in a game-smoking tent for 39 days and in hunting cabins on the west coast of James Bay, Canada, for 8 days. Five-minute averaged BC mass concentration (N = 12,319) data were recorded and assessed using optimised noise-reduction averaging. Mean BC mass concentrations were lower in hunting cabins (mean = 8.25 micrograms per cubic metre (µg m⁻³)) and higher in the game-smoking tent (mean = 15.46 µg m⁻³). However, excessive BC peaks were recorded in the game-smoking tent (maximum = 3076.71 µg m⁻³) when the fire was stoked or loaded. The intervention with the propane heater in a hunting cabin yielded a 90% reduction in measured BC mass concentrations. We do not presume that exposure to BC is of concern in hunting cabins with appropriate wood-burning appliances that are well-sealed and vent outside. In game-smoking tents, we advise that persons take intermittent breaks outside of the tent for fresh air.

Systemic Exposure to Air Pollution Induces Oxidative Stress and Inflammation in Mouse Brain, Contributing to Neurodegeneration Onset

In northern Italy, biomass burning-derived (BB) particles and diesel exhaust particles (DEP) are considered the most significant contributors to ultrafine particle (UFP) emission. However, a comparison between their impact on different brain regions was not investigated until now. Therefore, male BALB/c mice were treated with a single or three consecutive intratracheal instillations using 50 µg of UFPs in 100 µL of isotonic saline solution or 100 µL of isotonic saline solution alone, and brains were collected and analyzed. Proteins related to oxidative stress and inflammation, as well as Alzheimer's disease markers, were examined in the hippocampus, cerebellum, and the rest of the brain (RoB). Histopathological examination of the brain was also performed. Moreover, correlations among different brain, pulmonary, and cardiovascular markers were performed, allowing us to identify the potentially most stressful UFP source. Although both acute exposures induced inflammatory pathways in mouse brain, only DEP showed strong oxidative stress. The sub-acute exposure also induced the modulation of APP and BACE1 protein levels for both UFPs. We observed that DEP exposure is more harmful than BB, and this different response could be explained by this UFP's different chemical composition and reactivity.

Health Impacts of Ambient Biomass Smoke in Tasmania, Australia

The island state of Tasmania has marked seasonal variations of fine particulate matter (PM2.5) concentrations related to wood heating during winter, planned forest fires during autumn and spring, and bushfires during summer. Biomass smoke causes considerable health harms and associated costs. We estimated the historical health burden from PM2.5 attributable to wood heater smoke (WHS) and landscape fire smoke (LFS) in Tasmania between 2010 and 2019. We calculated the daily population level exposure to WHS- and LFS-related PM2.5 and estimated the number of cases and health costs due to premature mortality, cardiorespiratory hospital admissions, and asthma emergency department (ED) visits. We estimated 69 deaths, 86 hospital admissions, and 15 asthma ED visits, each year, with over 74% of impacts attributed to WHS. Average yearly costs associated with WHS were of AUD$ 293 million and AUD$ 16 million for LFS. The latter increased up to more than AUD$ 34 million during extreme bushfire seasons. This is the first study to quantify the health impacts attributable to biomass smoke for Tasmania. We estimated substantial impacts, which could be reduced through replacing heating technologies, improving fire management, and possibly implementing integrated strategies. This would most likely produce important and cost-effective health benefits.

Particulate inorganic salts and trace element emissions of a domestic boiler fed with five commercial brands of wood pellets

Pellet stoves arouse a real interest from consumers because they are perceived as a renewable and carbon neutral energy. However, wood combustion can contribute significantly to air pollution, in particular through the emission of particulate matter (PM). In this article, five brands of wood pellets were burnt under optimal combustion conditions and trace element and inorganic salt emission factors (EFs) in PM were determined. Results show that a significant proportion of metals such as lead, zinc, cadmium, and copper initially present in pellets were emitted into the air during combustion with 20 ± 6%, 31 ± 12%, and 19 ± 6% of the initial content respectively for Zn, Pb, and Cd. The median emission factors for Pb, Cu, Cd, As, Zn, and Ni were respectively 188, 86, 9.3, 8.7, 2177, and 3.5 μg kg^-1. The inorganic fraction of the PM emissions was dominated by K⁺, SO₄^2-, and Cl^- with respective EFs of 33, 28.7, and 11.2 mg kg^-1. Even taking into account a consumption of 40.1 million tons by 2030 in the EU, the resulting pollution in terms of heavy metal emissions remains minimal in comparison with global emissions in the EU.

Exposure to Wood Smoke and Associated Health Effects in Sub-Saharan Africa: A Systematic Review

Background

Observational studies suggest that exposure to wood smoke is associated with a variety of adverse health effects in humans.

Objective

We aimed to summarise evidence from sub-Saharan Africa on levels of exposure to pollutants in wood smoke and the association between such exposures and adverse health outcomes.

Methods

PubMed and Google scholar databases were searched for original articles reporting personal exposure levels to pollutants or health outcomes associated with wood smoke exposure in Sub-Saharan African population.

Results

Mean personal PM_2.5 and carbon monoxide levels in the studies ranged from 26.3 ± 1.48 μg/m³ to 1574 ± 287μg/m³ and from 0.64 ± 2.12 ppm to 22 ± 2.4 ppm, respectively. All the reported personal PM_2.5 exposure levels were higher than the World Health Organization's Air Quality Guideline (AQG) for 24-hour mean exposure. Use of wood fuels in domestic cooking is the major source of wood smoke exposure in this population. Occupational exposure to wood smoke included the use of wood fuels in bakery, fish drying, cassava processing and charcoal production. Females were exposed to higher levels of these pollutants than males of the same age range. Major determinants for higher exposure to wood smoke in SSA included use of unprocessed firewood, female gender and occupational exposure. We recorded strong and consistent associations between exposure to wood smoke and respiratory diseases including acute respiratory illness and impaired lung function. Positive associations were reported for increased blood pressure, low birth weight, oesophageal cancer, sick building syndrome, non-syndromic cleft lip and/or cleft palate and under-five mortality.

Conclusion

There is high level of exposure to wood smoke in SSA and this exposure is associated with a number of adverse health effects. There is urgent need for aggressive programs to reduce wood smoke exposure in this population.

Fine Particle Emissions from Sauna Stoves: Effects of Combustion Appliance and Fuel, and Implications for the Finnish Emission Inventory

Sauna Stoves (SS) are simple wood combustion appliances used mainly in Nordic countries. They generate emissions that have an impact on air quality and climate. In this study, a new measurement concept for comparing the operation, thermal efficiency, and real-life fine particle and gaseous emissions of SS was utilized. In addition, a novel, simple, and universal emission calculation procedure for the determination of nominal emission factors was developed for which the equations are presented for the first time. Fine particle and gaseous concentrations from 10 different types of SS were investigated. It was found that each SS model was an individual in relation to stove performance: stove heating time, air-to-fuel ratio, thermal efficiency, and emissions. Nine-fold differences in fine particle mass (PM1) concentrations, and about 90-fold differences in concentrations of polycyclic aromatic hydrocarbons (PAH) were found between the SS, when dry (11% moisture content) birch wood was used. By using moist (18%) wood, particle number and carbon monoxide concentrations increased, but interestingly, PM1, PAH, and black carbon (BC) concentrations clearly decreased, when comparing to dry wood. E.g., PAH concentrations were 5.5–9.6 times higher with dry wood than with moist wood. Between wood species, 2–3-fold maximum differences in the emissions were found, whereas about 1.5-fold differences were observed between bark-containing and debarked wood logs. On average, the emissions measured in this study were considerably lower than in previous studies and emission inventories. This suggests that overall the designs of sauna stoves available on the market have improved during the 2010s. The findings of this study were used to update the calculation scheme behind the inventories, causing the estimates for total PM emissions from SS in Finland to decrease. However, wood-fired sauna stoves are still estimated to be the highest individual emission source of fine particles and black carbon in Finland.

Emission Factors for Biofuels and Coal Combustion in a Domestic Boiler of 18 kW

The differences in the pollutant emissions from the combustion of bituminous coal and biofuels (wood, straw, and miscanthus pellets) under real-world boiler operating conditions were investigated. The experiments were performed on an experimental installation that comprised an 18 kW boiler, used in domestic central heating systems, equipped with a retort furnace, an automatic fuel feeder, a combustion air fan, and a fuel storage bin. The emission factors of gaseous pollutants, particulate matter, organic carbon, elemental carbon, and polycyclic aromatic hydrocarbons (PAHs), as well as some PAH concentration ratios for coal and biofuel combustion, were determined. The obtained results indicate that fuel properties have a strong influence on the emission factors of gaseous and carbonaceous pollutants. The total particulate matter (PM) emissions from the biofuel combustion were about 5-fold lower than those from the coal burned in the same boiler. The emission factors of the total carbons from the biofuel combustion were between 10 and 20 times lower than those from the coal combustion. The mean organic carbon (OC) and elemental carbon (EC) emission factors, based on the burned fuel, were 161–232 and 42–221 mg/kg for the biofuels and 1264 and 3410 g/kg for the coal, respectively. The obtained results indicate that molecular diagnostic ratios, based on the concentration of PAHs, vary significantly, depending on the fuel type.

Developmental Study of Soot-Oxidation Catalysts for Fireplaces: The Effect of Binder and Preparation Techniques on Catalyst Texture and Activity

An awareness of increasing climate and health problems has driven the development of new functional and affordable soot-oxidation catalysts for stationary sources, such as fireplaces. In this study, Al(OH)3, water glass and acidic aluminium phosphate binder materials were mixed with soot-oxidation catalysts. The effect of the binder on the performance of the Ag/La-Al2O3 catalyst was examined, while the Pt/La-Al2O3 catalyst bound with Al(OH)3 was used as a reference. Soot was oxidised above 340 °C on the Ag/La-Al2O3 catalyst, but at 310 °C with same catalyst bound with Al(OH)3. The addition of water glass decreased the catalytic performance because large silver crystals and agglomeration resulted in a blockage of the support material’s pores. Pt/La-Al2O3 bound with Al(OH)3 was ineffective in a fireplace environment. We believe that AgOx is the active form of silver in the catalyst. Hence, Ag/La-Al2O3 was shown to be compatible with the Al(OH)3 binder as an effective catalyst for fireplace soot oxidation.

Life cycle assessment of wood pellets and wood split logs for residential heating

Wood-fuelled systems are commonly used all over the world for residential heating, and recently wood pellets have been replacing traditional firewood. This article presents an environmental life cycle assessment of five wood-based combustion systems for residential heating: i) a pellet stove using maritime pine pellets; a wood stove using ii) eucalyptus (Eucalyptus globulus Labill.) and iii) maritime pine (Pinus pinaster Ait.) split logs; and a fireplace using iv) eucalyptus and v) maritime pine split logs. The functional unit is 1 MJ of thermal energy for residential heating. System boundaries include four stages: (1) forest management; (2) pellet and wood split log production; (3) distribution; and (4) thermal energy generation. Environmental impacts were calculated for seven impact categories from the ReCiPe 2016 midpoint method, and a sensitivity analysis was performed using the Product Environmental Footprint (PEF) life cycle impact assessment method and modifying the distances travelled. Of the five heating systems analysed, the fireplace presents the worst performance for all the impact categories with the exception of freshwater eutrophication and marine eutrophication, when maritime pine split logs are burned in the fireplace. Comparing the pellet stove with the wood stove, neither system is better for all the impact categories analysed. Regarding sensitivity analysis, the use of an alternative characterisation method leads to similar trends in the results in comparison with those obtained from the ReCiPe method, while changes in transport distances do not affect the total impacts to a large extent.