Adult mesenchymal stem cells and cell-based tissue engineering

Clinical and preclinical approach in AGA treatment: a review of current and new therapies in the regenerative field

Androgenetic alopecia (AGA) is the most prevalent type of hair loss. Its morbility is mainly psychological although an increased incidence in melanoma has also been observed in affected subjects. Current drug based therapies and physical treatments are either unsuccessful in the long term or have relevant side effects that limit their application. Therefore, a new therapeutic approach is needed to promote regenerative enhancement alternatives. These treatment options, focused on the cellular niche restoration, could be the solution to the impact of dihydrotestosterone in the hair follicle microenvironment. In this context emerging regenerative therapies such as Platelet-rich plasma or Platelet-rich fibrine as well as hair follicle stem cells and mesenchymal stem cell based therapies and their derivatives (conditioned medium CM or exoxomes) are highlighting in the evolving landscape of hair restoration. Nanotechnology is also leading the way in AGA treatment through the design of bioinks and nanobiomaterials whose structures are being configuring in a huge range of cases by means of 3D bioprinting. Due to the increasing number and the rapid creation of new advanced therapies alternatives in the AGA field, an extended review of the current state of art is needed. In addition this review provides a general insight in current and emerging AGA therapies which is intented to be a guidance for researchers highlighting the cutting edge treatments which are recently gaining ground.

Three-dimensional bioprinting of tissue-engineered skin: Biomaterials, fabrication techniques, challenging difficulties, and future directions: A review

As an emerging new manufacturing technology, Three-dimensional (3D) bioprinting provides the potential for the biomimetic construction of multifaceted and intricate architectures of functional integument, particularly functional biomimetic dermal structures inclusive of cutaneous appendages. Although the tissue-engineered skin with complete biological activity and physiological functions is still cannot be manufactured, it is believed that with the advances in matrix materials, molding process, and biotechnology, a new generation of physiologically active skin will be born in the future. In pursuit of furnishing readers and researchers involved in relevant research to have a systematic and comprehensive understanding of 3D printed tissue-engineered skin, this paper furnishes an exegesis on the prevailing research landscape, formidable obstacles, and forthcoming trajectories within the sphere of tissue-engineered skin, including: (1) the prevalent biomaterials (collagen, chitosan, agarose, alginate, etc.) routinely employed in tissue-engineered skin, and a discerning analysis and comparison of their respective merits, demerits, and inherent characteristics; (2) the underlying principles and distinguishing attributes of various current printing methodologies utilized in tissue-engineered skin fabrication; (3) the present research status and progression in the realm of tissue-engineered biomimetic skin; (4) meticulous scrutiny and summation of the extant research underpinning tissue-engineered skin inform the identification of prevailing challenges and issues.

The role of Semaphorin 3A in oral diseases

Semaphorin 3A (SEMA3A), also referred to as H-Sema III, is a molecule with significant biological importance in regulating physiological and pathological processes. However, its role in oral diseases, particularly its association with inflammatory immunity and alveolar bone remodeling defects, remains poorly understood. This comprehensive review article aims to elucidate the recent advances in understanding SEMA3A in the oral system, encompassing nerve formation, periodontitis, pulpitis, apical periodontitis, and oral squamous cell carcinoma. Notably, we explore its novel function in inflammatory immunomodulation and alveolar bone formation during oral infectious diseases. By doing so, this review enhances our comprehension of SEMA3A's role in oral biology and opens up possibilities for modulatory approaches and potential treatments in oral diseases.

Current therapies for osteoarthritis and prospects of CRISPR-based genome, epigenome, and RNA editing in osteoarthritis treatment

Osteoarthritis (OA) is one of the most common degenerative joint diseases worldwide, causing pain, disability, and decreased quality of life. The balance between regeneration and inflammation-induced degradation results in multiple etiologies and complex pathogenesis of OA. Currently, there is a lack of effective therapeutic strategies for OA treatment. With the development of CRISPR-based genome, epigenome, and RNA editing tools, OA treatment has been improved by targeting genetic risk factors, activating chondrogenic elements, and modulating inflammatory regulators. Supported by cell therapy and in vivo delivery vectors, genome, epigenome, and RNA editing tools may provide a promising approach for personalized OA therapy. This review summarizes CRISPR-based genome, epigenome, and RNA editing tools that can be applied to the treatment of OA and provides insights into the development of CRISPR-based therapeutics for OA treatment. Moreover, in-depth evaluations of the efficacy and safety of these tools in human OA treatment are needed.

Stretching of porous poly (l-lactide-co-ε-caprolactone) membranes regulates the differentiation of mesenchymal stem cells

Background: Among a variety of biomaterials supporting cell growth for therapeutic applications, poly (l-lactide-co-ε-caprolactone) (PLCL) has been considered as one of the most attractive scaffolds for tissue engineering owing to its superior mechanical strength, biocompatibility, and processibility. Although extensive studies have been conducted on the relationship between the microstructure of polymeric materials and their mechanical properties, the use of the fine-tuned morphology and mechanical strength of PLCL membranes in stem cell differentiation has not yet been studied. Methods: PLCL membranes were crystallized in a combination of diverse solvent-nonsolvent mixtures, including methanol (MeOH), isopropanol (IPA), chloroform (CF), and distilled water (DW), with different solvent polarities. A PLCL membrane with high mechanical strength induced by limited pore formation was placed in a custom bioreactor mimicking the reproducible physiological microenvironment of the vascular system to promote the differentiation of mesenchymal stem cells (MSCs) into smooth muscle cells (SMCs). Results: We developed a simple, cost-effective method for fabricating porosity-controlled PLCL membranes based on the crystallization of copolymer chains in a combination of solvents and non-solvents. We confirmed that an increase in the ratio of the non-solvent increased the chain aggregation of PLCL by slow evaporation, leading to improved mechanical properties of the PLCL membrane. Furthermore, we demonstrated that the cyclic stretching of PLCL membranes induced MSC differentiation into SMCs within 10 days of culture. Conclusion: The combination of solvent and non-solvent casting for PLCL solidification can be used to fabricate mechanically durable polymer membranes for use as mechanosensitive scaffolds for stem cell differentiation.

Recent Advancements of Bioinks for 3D Bioprinting of Human Tissues and Organs

3D bioprinting is recognized as a promising biomanufacturing technology that enables the reproducible and high-throughput production of tissues and organs through the deposition of different bioinks. Especially, bioinks based on loaded cells allow for immediate cellularity upon printing, providing opportunities for enhanced cell differentiation for organ manufacturing and regeneration. Thus, extensive applications have been found in the field of tissue engineering. The performance of the bioinks determines the functionality of the entire printed construct throughout the bioprinting process. It is generally expected that bioinks should support the encapsulated cells to achieve their respective cellular functions and withstand normal physiological pressure exerted on the printed constructs. The bioinks should also exhibit a suitable printability for precise deposition of the constructs. These characteristics are essential for the functional development of tissues and organs in bioprinting and are often achieved through the combination of different biomaterials. In this review, we have discussed the cutting-edge outstanding performance of different bioinks for printing various human tissues and organs in recent years. We have also examined the current status of 3D bioprinting and discussed its future prospects in relieving or curing human health problems.

Advances in 3D Printing of Highly Bioadaptive Bone Tissue Engineering Scaffolds

The number of patients with bone defects caused by trauma, bone tumors, and osteoporosis has increased considerably. The repair of irregular, recurring, and large bone defects poses a great challenge to clinicians. Bone tissue engineering is emerging as an appropriate strategy to replace autologous bone grafting in the repair of critically sized bone defects. However, the suitability of bone tissue engineering scaffolds in terms of structure, mechanics, degradation, and the microenvironment is inadequate. Three-dimensional (3D) printing is an advanced additive-manufacturing technology widely used for bone repair. 3D printing constructs personalized structurally adapted scaffolds based on 3D models reconstructed from CT images. The contradiction between the mechanics and degradation is resolved by altering the stacking structure. The local microenvironment of the implant is improved by designing an internal pore structure and a spatiotemporal factor release system. Therefore, there has been a boom in the 3D printing of personalized bone repair scaffolds. In this review, successful research on the preparation of highly bioadaptive bone tissue engineering scaffolds using 3D printing is presented. The mechanisms of structural, mechanical, degradation, and microenvironmental adaptations of bone prostheses and their interactions were elucidated to provide a feasible strategy for constructing highly bioadaptive bone tissue engineering scaffolds.

Proliferation and Differentiation Potential of Bone Marrow-Derived Mesenchymal Stem Cells From Children With Polydactyly and Adults With Basal Joint Arthritis

This study compared the proliferation and differentiation potential of bone marrow-derived mesenchymal stem cells (BMSCs) derived from infants with polydactyly and adults with basal joint arthritis. The proliferation rate of adult and infant BMSCs was determined by the cell number changes and doubling times. The γH2AX immunofluorescence staining, age-related gene expression, senescence-associated β-galactosidase (SA-β-gal) staining were analyzed to determine the senescence state of adult and infant BMSCs. The expression levels of superoxide dismutases (SODs) and genes associated with various types of differentiation were measured using Real-Time Quantitative Polymerase Chain Reaction (RT-qPCR). Differentiation levels were evaluated through histochemical and immunohistochemical staining. The results showed that infant BMSCs had a significantly higher increase in cell numbers and faster doubling times compared with adult BMSCs. Infant BMSCs at late stages exhibited reduced γH2AX expression and SA-β-gal staining, indicating lower levels of senescence. The expression levels of senescence-related genes (p16, p21, and p53) in infant BMSCs were also lower than in adult BMSCs. In addition, infant BMSCs demonstrated higher antioxidative ability with elevated expression of SOD1, SOD2, and SOD3 compared with adult BMSCs. In terms of differentiation potential, infant BMSCs outperformed adult BMSCs in chondrogenesis, as indicated by higher expression levels of chondrogenic genes (SOX9, COL2, and COL10) and positive immunohistochemical staining. Moreover, differentiated cells derived from infant BMSCs exhibited significantly higher expression levels of osteogenic, tenogenic, hepatogenic, and neurogenic genes compared with those derived from adult BMSCs. Histochemical and immunofluorescence staining confirmed these findings. However, adult BMSCs showed lower adipogenic differentiation potential compared with infant BMSCs. Overall, infant BMSCs demonstrated superior characteristics, including higher proliferation rates, enhanced antioxidative activity, and greater differentiation potential into various lineages. They also exhibited reduced cellular senescence. These findings, within the context of cellular differentiation, suggest potential implications for the use of allogeneic BMSC transplantation, emphasizing the need for further in vivo investigation.

Stem cells as potential therapeutics for hearing loss

Hearing impairment is a global health problem. Stem cell therapy has become a cutting-edge approach to tissue regeneration. In this review, the recent advances in stem cell therapy for hearing loss have been discussed. Nanomaterials can modulate the stem cell microenvironment to augment the therapeutic effects further. The potential of combining nanomaterials with stem cells for repairing and regenerating damaged inner ear hair cells (HCs) and spiral ganglion neurons (SGNs) has also been discussed. Stem cell-derived exosomes can contribute to the repair and regeneration of damaged tissue, and the research progress on exosome-based hearing loss treatment has been summarized as well. Despite stem cell therapy's technical and practical limitations, the findings reported so far are promising and warrant further investigation for eventual clinical translation.

Strategic outline of interventions targeting extracellular matrix for promoting healthy longevity

The extracellular matrix (ECM), composed of interlinked proteins outside of cells, is an important component of the human body that helps maintain tissue architecture and cellular homeostasis. As people age, the ECM undergoes changes that can lead to age-related morbidity and mortality. Despite its importance, ECM aging remains understudied in the field of geroscience. In this review, we discuss the core concepts of ECM integrity, outline the age-related challenges and subsequent pathologies and diseases, summarize diagnostic methods detecting a faulty ECM, and provide strategies targeting ECM homeostasis. To conceptualize this, we built a technology research tree to hierarchically visualize possible research sequences for studying ECM aging. This strategic framework will hopefully facilitate the development of future research on interventions to restore ECM integrity, which could potentially lead to the development of new drugs or therapeutic interventions promoting health during aging.

Mesenchymal Stem Cells: Generalities and Clinical Significance in Feline and Canine Medicine

Mesenchymal stem cells (MSCs) are multipotent cells: they can proliferate like undifferentiated cells and have the ability to differentiate into different types of cells. A considerable amount of research focuses on the potential therapeutic benefits of MSCs, such as cell therapy or tissue regeneration, and MSCs are considered powerful tools in veterinary regenerative medicine. They are the leading type of adult stem cells in clinical trials owing to their immunosuppressive, immunomodulatory, and anti-inflammatory properties, as well as their low teratogenic risk compared with pluripotent stem cells. The present review details the current understanding of the fundamental biology of MSCs. We focus on MSCs' properties and their characteristics with the goal of providing an overview of therapeutic innovations based on MSCs in canines and felines.

Regulation of endothelial cells on the osteogenic ability of bone marrow mesenchymal stem cells in peri-implantitis

OBJECTIVES

The relationship between bone resorption and angiogenesis in peri-implantitis remains to be studied. We constructed a Beagle dog model of peri-implantitis, and extracted bone marrow mesenchymal stem cells (BMSCs) and endothelial cells (ECs) for culture. The osteogenic ability of BMSCs in the presence of ECs was investigated through an in vitro osteogenic induction model, and its mechanism was initially explored.

SUBJECTS AND METHODS

The peri-implantitis model was verified by ligation, bone loss was observed by micro-CT, and cytokines were detected by ELISA. The isolated BMSCs and ECs were cultured to detect the expression of angiogenesis, osteogenesis-related proteins, and NF-κB signaling pathway-related proteins.

RESULTS

8 weeks after surgery, the peri-implant gums were swollen, and micro-CT showed bone resorption. Compared with the control group, IL-1β, TNF-α, ANGII and VEGF were markedly increased in the peri-implantitis group. In vitro studies found that the osteogenic differentiation ability of BMSCs co-cultured with IECs was decreased, and the expression of NF-κB signaling pathway-related cytokines was increased.

CONCLUSION

Endothelial cells inhibit the osteogenic differentiation of bone marrow mesenchymal stem cells through NF-κB signaling in the environment of peri-implantitis, which may become a new target for the treatment of peri-implantitis.

Basic Properties of Adipose-Derived Mesenchymal Stem Cells of Rheumatoid Arthritis and Osteoarthritis Patients

Rheumatoid arthritis (RA) and osteoarthritis (OA) are destructive joint diseases, the development of which are associated with the expansion of pathogenic T lymphocytes. Mesenchymal stem cells may be an attractive therapeutic option for patients with RA or OA due to the regenerative and immunomodulatory abilities of these cells. The infrapatellar fat pad (IFP) is a rich and easily available source of mesenchymal stem cells (adipose-derived stem cells, ASCs). However, the phenotypic, potential and immunomodulatory properties of ASCs have not been fully characterised. We aimed to evaluate the phenotype, regenerative potential and effects of IFP-derived ASCs from RA and OA patients on CD4+ T cell proliferation. The MSC phenotype was assessed using flow cytometry. The multipotency of MSCs was evaluated on the basis of their ability to differentiate into adipocytes, chondrocytes and osteoblasts. The immunomodulatory activities of MSCs were examined in co-cultures with sorted CD4+ T cells or peripheral blood mononuclear cells. The concentrations of soluble factors involved in ASC-dependent immunomodulatory activities were assessed in co-culture supernatants using ELISA. We found that ASCs with PPIs from RA and OA patients maintain the ability to differentiate into adipocytes, chondrocytes and osteoblasts. ASCs from RA and OA patients also showed a similar phenotype and comparable abilities to inhibit CD4+ T cell proliferation, which was dependent on the induction of soluble factors The results of our study constitute the basis for further research on the therapeutic potential of ASCs in the treatment of patients with RA and OA.

Translational Nanomedicines Across Human Reproductive Organs Modeling on Microfluidic Chips: State-of-the-Art and Future Prospects

Forecasting the consequence of nanoparticles (NPs) and therapeutically significant molecules before materializing for human clinical trials is a mainstay for drug delivery and screening processes. One of the noteworthy obstacles that has prevented the clinical translation of NP-based drug delivery systems and novel drugs is the lack of effective preclinical platforms. As a revolutionary technology, the organ-on-a-chip (OOC), a coalition of microfluidics and tissue engineering, has surfaced as an alternative to orthodox screening platforms. OOC technology recapitulates the structural and physiological features of human organs along with intercommunications between tissues on a chip. The current review discusses the concept of microfluidics and confers cutting-edge fabrication processes for chip designing. We also outlined the advantages of microfluidics in analyzing NPs in terms of characterization, transport, and degradation in biological systems. The review further elaborates the scope and research on translational nanomedicines in human reproductive organs (testis, placenta, uterus, and menstrual cycle) by taking the advantages offered by microfluidics and shedding light on their potential future implications. Finally, we accentuate the existing challenges for clinical translation and scale-up dynamics for microfluidics chips and emphasize its future perspectives.

Block Copolymers in 3D/4D Printing: Advances and Applications as Biomaterials

3D printing is a manufacturing technique in constant evolution. Day by day, new materials and methods are discovered, making 3D printing continually develop. 3D printers are also evolving, giving us objects with better resolution, faster, and in mass production. One of the areas in 3D printing that has excellent potential is 4D printing. It is a technique involving materials that can react to an environmental stimulus (pH, heat, magnetism, humidity, electricity, and light), causing an alteration in their physical or chemical state and performing another function. Lately, 3D/4D printing has been increasingly used for fabricating materials aiming at drug delivery, scaffolds, bioinks, tissue engineering (soft and hard), synthetic organs, and even printed cells. The majority of the materials used in 3D printing are polymeric. These materials can be of natural origin or synthetic ones of different architectures and combinations. The use of block copolymers can combine the exemplary properties of both blocks to have better mechanics, processability, biocompatibility, and possible stimulus behavior via tunable structures. This review has gathered fundamental aspects of 3D/4D printing for biomaterials, and it shows the advances and applications of block copolymers in the field of biomaterials over the last years.

Impact of Nanotechnology on Differentiation and Augmentation of Stem Cells for Liver Therapy

The liver is one of the crucial organs of the body that performs hundreds of chemical reactions needed by the body to survive. It is also the largest gland of the body. The liver has multiple functions, including the synthesis of chemicals, metabolism of nutrients, and removal of toxins. It also acts as a storage unit. The liver has a unique ability to regenerate itself, but it can lead to permanent damage if the injury is beyond recovery. The only possible treatment of severe liver damage is liver transplant which is a costly procedure and has several other drawbacks. Therefore, attention has been shifted towards the use of stem cells that have shown the ability to differentiate into hepatocytes. Among the numerous kinds of stem cells (SCs), the mesenchymal stem cells (MSCs) are the most famous. Various studies suggest that an MSC transplant can repair liver function, improve the signs and symptoms, and increase the chances of survival. This review discusses the impact of combining stem cell therapy with nanotechnology. By integrating stem cell science and nanotechnology, the information about stem cell differentiation and regulation will increase, resulting in a better comprehension of stem cell-based treatment strategies. The augmentation of SCs with nanoparticles has been shown to boost the effect of stem cell-based therapy. Also, the function of green nanoparticles in liver therapies is discussed.

Auricular cartilage regeneration using different types of mesenchymal stem cells in rabbits

BACKGROUND

Cartilaginous disorders comprise a wide range of diseases that affect normal joint movement, ear and nose shape; and they have great social and economic impact. Mesenchymal stem cells (MSCs) provide a promising regeneration alternative for treatment of degenerative cartilaginous disorders. This study aimed to compare therapeutic potential of different types of laser activated MSCs to promote auricular cartilage regeneration. Twelve adult rabbit allocated equally in four groups, all animals received a surgical mid auricular cartilage defect in one ear; Group I (Positive control) injected sub-perichondrially with phosphate-buffered saline (PBS), Group II (ADMSC-transplanted group) injected adipose-derived MSCs (ADMSCs), Group III (BMMSCs-transplanted group) received bone marrow-derived MSCs (BMMSCs), and Group IV (EMSC-transplanted group) received ear MSCs (EMSCs) in the defected ear. The auricular defect was analyzed morphologically, histopathologically and immunohistochemically after 4 weeks. In addition, a quantitative real-time polymerase chain reaction was used to examine expression of the collagen type II (Col II) and aggrecan as cartilage growth factors.

RESULTS

The auricles of all treatments appeared completely healed with smooth surfaces and similar tissue color. Histopathologically, defective areas of control positive group, ADMSCs and EMSCs treated groups experienced a small area of immature cartilage. While BMMSCs treated group exhibited typical features of new cartilage formation with mature chondrocytes inside their lacunae and dense extracellular matrix (ECM). In addition, BMMSC treated group showed a positive reaction to Masson's trichrome and orcein stains. In contrary, control positive, ADMSC and EMSC groups revealed faint staining with Masson's trichrome and Orcein. Immunohistochemically, there was an intense positive S100 expression in BMMSCs (with a significant increase of area percentage + 21.89 (P < 0.05), a moderate reaction in EMSCs (with an area percentage + 17.97, and a mild reaction in the control group and ADMSCs (area percentages + 8.02 and + 11.37, respectively). The expression of relative col II and aggrecan was substantially highest in BMMSCs (± 0.91 and ± 0.89, respectively). While, Control positive, ADMSCs and EMSCs groups recorded (± 0.41: ± 0.21, ± 0.6: ± 0.44, ± 0.61: ± 0.63) respectively.

CONCLUSION

BMMSCs showed the highest chondrogenic potential compared to ADMSCs and EMSCs and should be considered the first choice in treatment of cartilaginous degenerative disorders.

Immunomodulatory Effects of Mesenchymal Stem Cell-Derived Extracellular Vesicles in Allergic Airway Disease

Mesenchymal stem cells (MSCs) have been reported as promising candidates for the treatment of various diseases, especially allergic diseases, as they have the capacity to differentiate into various cells. However, MSCs itself have several limitations such as creating a risk of aneuploidy, difficulty in handling them, immune rejection, and tumorigenicity, so interest in the extracellular vesicles (EVs) released from MSCs are increasing, and many studies have been reported. Previous studies have shown that extracellular vesicles (EVs) produced by MSCs are as effective as the MSCs themselves in suppression of allergic airway inflammation through the suppression of Th2 cytokine production and the induction of regulatory T cells (Treg) expansion. EVs are one of the substances secreted by paracrine induction from MSCs, and because it exerts its effect by delivering contents such as mRNA, microRNA, and proteins to the receptor cell, it can reduce the problems or risks related to stem cell therapy. This article reviews the immunomodulatory properties of MSCs-derived EVs and their therapeutic implications for allergic airway disease.

Stem cell membrane-coated abiotic nanomaterials for biomedical applications

Nanoscale materials have been extensively employed for diagnostic and therapeutic purposes. However, the developed nanosystems still suffer from some limitations, namely the rapid elimination by the immune system, lack of targeting to specific cells, and insufficient biocompatibility. Therefore, novel strategies based upon a biomimetic approach have received attention to improving the pharmacokinetics and safety profile of nanosystems. One promising strategy is the application of a biomimetic coating consisting of cell membranes derived from different cell types onto nanoparticle cores. Stem cells have been investigated to develop targeted nanodevices owing to their excellent intrinsic tissue-specific homing features, protecting them from the immune system to reach the sites of inflammation. This targeting ability is conferred by a surface repertoire of stem cell-associated biomolecules. Such nanoscopical materials offer sustained circulation and boosted drug accumulation at target sites, augmenting therapeutic efficacy and safety. Additionally, the coating of nanoparticles with cell membranes acts as a camouflage mechanism to increase their circulation time. The current review explores the particular features of stem cell membrane coating as multifunctional biomimetic surface functionalization agents to camouflage nanoparticle cores. Biomedical applications of engineered stem cell membrane-coated nanoparticles, challenges in clinical translation, and their future prospects are addressed.

Bisphenol A and 2,3,7,8-tetrachlorodibenzo-p-dioxin at non-cytotoxic doses alter the differentiation potential and cell function of rat adipose-stem cells

The possibility of chemical contamination is an important issue to consider when designing a cell therapy strategy. Both bisphenol A (BPA) and 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) are among the most environmentally relevant endocrine disrupting chemicals (EDCs, compounds with a high affinity for adipose tissue) recently studied. Adipose-derived stem cells (ASCs) are mesenchymal stromal cells (MSCs) obtained from adipose tissue widely used in regenerative medicine to prevent and treat diseases in several tissues and organs. Although the experimental use of tissue-engineered constructs requires careful analysis for approval and implantation, there has been a recent increase in the number of approved clinical trials for this promising strategy. This study aimed to evaluate cell viability, apoptosis, DNA damage, and the adipogenic or osteogenic differentiation potential of rat adipose-derived stem cells (rASCs) exposed to previously established non-cytotoxic doses of BPA and TCDD in vitro. Results demonstrated that 10 μM of BPA and 10 nM of TCDD were able to significantly reduce cell viability, while all exposure levels resulted in DNA damage, although did not increase the apoptosis rate. According to the analysis of adipogenic differentiation, 1 μM of BPA induced the significant formation of oil droplets, suggesting an increased adipocyte differentiation, while both 10 μM of BPA and 10 nM of TCDD decreased adipocyte differentiation. Osteogenic differentiation did not differ among the treatments. As such, BPA and TCDD in the concentrations tested can modify important processes in rASCs such as cell viability, adipogenic differentiation, and DNA damage. Together, these findings prove that EDCs play an important role as contaminants, putatively interfering in cell differentiation and thus impairing the therapeutic use of ASCs.

Stem cell-based therapy for human diseases

Recent advancements in stem cell technology open a new door for patients suffering from diseases and disorders that have yet to be treated. Stem cell-based therapy, including human pluripotent stem cells (hPSCs) and multipotent mesenchymal stem cells (MSCs), has recently emerged as a key player in regenerative medicine. hPSCs are defined as self-renewable cell types conferring the ability to differentiate into various cellular phenotypes of the human body, including three germ layers. MSCs are multipotent progenitor cells possessing self-renewal ability (limited in vitro) and differentiation potential into mesenchymal lineages, according to the International Society for Cell and Gene Therapy (ISCT). This review provides an update on recent clinical applications using either hPSCs or MSCs derived from bone marrow (BM), adipose tissue (AT), or the umbilical cord (UC) for the treatment of human diseases, including neurological disorders, pulmonary dysfunctions, metabolic/endocrine-related diseases, reproductive disorders, skin burns, and cardiovascular conditions. Moreover, we discuss our own clinical trial experiences on targeted therapies using MSCs in a clinical setting, and we propose and discuss the MSC tissue origin concept and how MSC origin may contribute to the role of MSCs in downstream applications, with the ultimate objective of facilitating translational research in regenerative medicine into clinical applications. The mechanisms discussed here support the proposed hypothesis that BM-MSCs are potentially good candidates for brain and spinal cord injury treatment, AT-MSCs are potentially good candidates for reproductive disorder treatment and skin regeneration, and UC-MSCs are potentially good candidates for pulmonary disease and acute respiratory distress syndrome treatment.

Modelling acute myeloid leukemia (AML): What's new? A transition from the classical to the modern

Acute myeloid leukemia (AML) is a heterogeneous malignancy affecting myeloid cells in the bone marrow (BM) but can spread giving rise to impaired hematopoiesis. AML incidence increases with age and is associated with poor prognostic outcomes. There has been a disconnect between the success of novel drug compounds observed in preclinical studies of hematological malignancy and less than exceptional therapeutic responses in clinical trials. This review aims to provide a state-of-the-art overview on the different preclinical models of AML available to expand insights into disease pathology and as preclinical screening tools. Deciphering the complex physiological and pathological processes and developing predictive preclinical models are key to understanding disease progression and fundamental in the development and testing of new effective drug treatments. Standard scaffold-free suspension models fail to recapitulate the complex environment where AML occurs. To this end, we review advances in scaffold/matrix-based 3D models and outline the most recent advances in on-chip technology. We also provide an overview of clinically relevant animal models and review the expanding use of patient-derived samples, which offer the prospect to create more "patient specific" screening tools either in the guise of 3D matrix models, microphysiological "organ-on-chip" tools or xenograft models and discuss representative examples.

Mesenchymal Stromal Cells in Osteoarthritis: Evidence for Structural Benefit and Cartilage Repair

Osteoarthritis (OA) presents a major clinical challenge to rheumatologists and orthopedists due to the lack of available drugs reducing structural degradation. Mesenchymal stromal cells (MSCs) may represent new therapeutic approaches in cartilage regeneration. In this review, we highlight the latest knowledge on the biological properties of MSC, such as their chondrogenic and immunomodulatory potential, and we give a brief overview of the effects of MSCs in preclinical and clinical studies of OA treatment and also compare different MSC sources, with the adipose tissue-derived MSCs being promising. Then, we focus on their structural benefit in treating OA and summarize the current evidence for the assessment of cartilage in OA according to magnetic resonance imaging (MRI) and second-look arthroscopy after MSC therapy. Finally, this review provides a brief perspective on enhancing the activity of MSCs.

Three-Dimensional (3D) Printing in Cancer Therapy and Diagnostics: Current Status and Future Perspectives

Three-dimensional (3D) printing is a technique where the products are printed layer-by-layer via a series of cross-sectional slices with the exact deposition of different cell types and biomaterials based on computer-aided design software. Three-dimensional printing can be divided into several approaches, such as extrusion-based printing, laser-induced forward transfer-based printing systems, and so on. Bio-ink is a crucial tool necessary for the fabrication of the 3D construct of living tissue in order to mimic the native tissue/cells using 3D printing technology. The formation of 3D software helps in the development of novel drug delivery systems with drug screening potential, as well as 3D constructs of tumor models. Additionally, several complex structures of inner tissues like stroma and channels of different sizes are printed through 3D printing techniques. Three-dimensional printing technology could also be used to develop therapy training simulators for educational purposes so that learners can practice complex surgical procedures. The fabrication of implantable medical devices using 3D printing technology with less risk of infections is receiving increased attention recently. A Cancer-on-a-chip is a microfluidic device that recreates tumor physiology and allows for a continuous supply of nutrients or therapeutic compounds. In this review, based on the recent literature, we have discussed various printing methods for 3D printing and types of bio-inks, and provided information on how 3D printing plays a crucial role in cancer management.

Comparison of the Infant and Adult Adipose-Derived Mesenchymal Stem Cells in Proliferation, Senescence, Anti-oxidative Ability and Differentiation Potential

BACKGROUND

Infant adipose-derived mesenchymal stem cells (ADSCs) collected from excised polydactyly fat tissue, which was surgical waste, could be cultured and expanded in vitro in this study. In addition, the collecting process would not cause pain in the host. In this study, the proliferation, reduction of senescence, anti-oxidative ability, and differentiation potential in the infant ADSCs were compared with those in the adult ADSCs harvested from thigh liposuction to determine the availability of infant ADSCs.

METHODS

Proliferation was determined by detecting the fold changes in cell numbers and doubling time periods. Senescence was analyzed by investigating the age-related gene expression levels and the replicative stress. The superoxide dismutase (SOD) gene expression, adipogenic, neurogenic, osteogenic, and tenogenic differentiation were compared by RT-qPCR. The chondrogenic differentiation efficiency was also determined using RT-qPCR and immunohistochemical staining.

RESULTS

The proliferation, SOD (SOD1, SOD2 and SOD3) gene expression, the stemness-related gene (c-MYC) and telomerase reverse transcriptase of the infant ADSCs at early passages were enhanced compared with those of the adults'. Cellular senescence related genes, including p16, p21 and p53, and replicative stress were reduced in the infant ADSCs. The adipogenic genes (PPARγ and LPL) and neurogenic genes (MAP2 and NEFH) of the infant ADSC differentiated cells were significantly higher than those of the adults' while the expression of the osteogenic genes (OCN and RUNX) and tenogenic genes (TNC and COL3A1) of both demonstrated opposite results. The chondrogenic markers (SOX9, COL2 and COL10) were enhanced in the infant ADSC differentiated chondrogenic pellets, and the expression levels of SODs were decreased during the differentiation process.

CONCLUSION

Cultured infant ADSCs demonstrate less cellular senescence and replicative stress, higher proliferation rates, better antioxidant defense activity, and higher potential of chondrogenic, adipogenic and neurogenic differentiation.

Biologically Relevant In Vitro 3D-Model to Study Bone Regeneration Potential of Human Adipose Stem Cells

Standard cell cultures may not predict the proliferation and differentiation potential of human mesenchymal stromal cells (MSCs) after seeding on a scaffold and implanting this construct in a bone defect. We aimed to develop a more biologically relevant in vitro 3D-model for preclinical studies on the bone regeneration potential of MSCs. Human adipose tissue-derived mesenchymal stromal cells (hASCs; five donors) were seeded on biphasic calcium phosphate (BCP) granules and cultured under hypoxia (1% O2) for 14 days with pro-inflammatory TNFα, IL4, IL6, and IL17F (10 mg/mL each) added during the first three days, simulating the early stages of repair (bone construct model). Alternatively, hASCs were cultured on plastic, under 20% O2 and without cytokines for 14 days (standard cell culture). After two days, the bone construct model decreased total DNA (3.9-fold), COL1 (9.8-fold), and RUNX2 expression (19.6-fold) and metabolic activity (4.6-fold), but increased VEGF165 expression (38.6-fold) in hASCs compared to standard cultures. After seven days, the bone construct model decreased RUNX2 expression (64-fold) and metabolic activity (2.3-fold), but increased VEGF165 (54.5-fold) and KI67 expression (5.7-fold) in hASCs compared to standard cultures. The effect of the bone construct model on hASC proliferation and metabolic activity could be largely mimicked by culturing on BCP alone (20% O2, no cytokines). The effect of the bone construct model on VEGF165 expression could be mimicked by culturing hASCs under hypoxia alone (plastic, no cytokines). In conclusion, we developed a new, biologically relevant in vitro 3D-model to study the bone regeneration potential of MSCs. Our model is likely more suitable for the screening of novel factors to enhance bone regeneration than standard cell cultures.

A review on 3D printing functional brain model

Modern neuroscience increasingly relies on 3D models to study neural circuitry, nerve regeneration, and neural disease. Several different biofabrication approaches have been explored to create 3D neural tissue model structures. Among them, 3D bioprinting has shown to have great potential to emerge as a high-throughput/high precision biofabrication strategy that can address the growing need for 3D neural models. Here, we have reviewed the design principles for neural tissue engineering. The main challenge to adapt printing technologies for biofabrication of neural tissue models is the development of neural bioink, i.e., a biomaterial with printability and gelation properties and also suitable for neural tissue culture. This review shines light on a vast range of biomaterials as well as the fundamentals of 3D neural tissue printing. Also, advances in 3D bioprinting technologies are reviewed especially for bioprinted neural models. Finally, the techniques used to evaluate the fabricated 2D and 3D neural models are discussed and compared in terms of feasibility and functionality.

Immunomodulatory functions of human mesenchymal stromal cells are enhanced when cultured on HEP/COL multilayers supplemented with interferon-gamma

Human mesenchymal stromal cells (hMSCs) are multipotent cells that have been proposed for cell therapies due to their immunosuppressive capacity that can be enhanced in the presence of interferon-gamma (IFN-γ). In this study, multilayers of heparin (HEP) and collagen (COL) (HEP/COL) were used as a bioactive surface to enhance the immunomodulatory activity of hMSCs using soluble IFN-γ. Multilayers were formed, via layer-by-layer assembly, varying the final layer between COL and HEP and supplemented with IFN-γ in the culture medium. We evaluated the viability, adhesion, real-time growth, differentiation, and immunomodulatory activity of hMSCs on (HEP/COL) multilayers. HMSCs viability, adhesion, and growth were superior when cultured on (HEP/COL) multilayers compared to tissue culture plastic. We also confirmed that hMSCs osteogenic and adipogenic differentiation remained unaffected when cultured in (HEP/COL) multilayers in the presence of IFN-γ. We measured the immunomodulatory activity of hMSCs by measuring the level of indoleamine 2,3-dioxygenase (IDO) expression. IDO expression was higher on (HEP/COL) multilayers treated with IFN-γ. Lastly, we evaluated the suppression of peripheral blood mononuclear cell (PBMC) proliferation when co-cultured with hMSCs on (HEP/COL) multilayers with IFN-γ. hMSCs cultured in (HEP/COL) multilayers in the presence of soluble IFN-γ have a greater capacity to suppress PBMC proliferation. Altogether, (HEP/COL) multilayers with IFN-γ in culture medium provides a potent means of enhancing and sustaining immunomodulatory activity to control hMSCs immunomodulation.

Combinations of Hydrogels and Mesenchymal Stromal Cells (MSCs) for Cartilage Tissue Engineering-A Review of the Literature

Cartilage offers limited regenerative capacity. Cell-based approaches have emerged as a promising alternative in the treatment of cartilage defects and osteoarthritis. Due to their easy accessibility, abundancy, and chondrogenic potential mesenchymal stromal cells (MSCs) offer an attractive cell source. MSCs are often combined with natural or synthetic hydrogels providing tunable biocompatibility, biodegradability, and enhanced cell functionality. In this review, we focused on the different advantages and disadvantages of various natural, synthetic, and modified hydrogels. We examined the different combinations of MSC-subpopulations and hydrogels used for cartilage engineering in preclinical and clinical studies and reviewed the effects of added growth factors or gene transfer on chondrogenesis in MSC-laden hydrogels. The aim of this review is to add to the understanding of the disadvantages and advantages of various combinations of MSC-subpopulations, growth factors, gene transfers, and hydrogels in cartilage engineering.

Culture and Differentiation of Human Umbilical Cord-Derived Mesenchymal Stem Cells on Growth Factor-Rich Fibrin Scaffolds to Produce Engineered Cartilages

INTRODUCTION

After injuries, the cartilage healing capacity is limited owing to its nature as a particular connective tissue without blood vessels, lymphatics, or nerves. The creation of artificial cartilage tissue mimics the biological properties of native cartilage and can reduce the need for donated tissue. Fibrin is a type of biodegradable scaffold that has great potential in tissue engineering applications. It can become good material for cell adhesion and proliferation in vitro. Therefore, this study aimed to create a cartilage tissue in vitro using umbilical cord-derived mesenchymal stem cells (UCMSC) and growth factor-rich fibrin (GRF) scaffolds.

METHODS

UCMSCs were isolated and expanded, and platelet-rich plasma (PRP) preparations were performed following previously published protocols. PRP was activated (aPRP) by a 0.45-μm syringe filter to release growth factors inside the platelets. Each 2.105 of the UCMSCs were suspended in 2 ml of aPRP to make the mixture of MSC and PRP (MSC-PRP). Then, Ca2+ solution was added to this mixture to produce the fibril scaffold with UCMSCs inside. UCMSCs' adhesion and proliferation inside the scaffold were evaluated by observation under inverted microscopy, H-E staining, MTT assays, and scanning electron microscopy (SEM). The fibril structure containing UCMSCs was cultured, and chondrogenesis was induced using commercial chondrogenesis media for 21 days (iMSC-GRF). The differentiation in efficacy toward cartilage was evaluated based on the accumulation of aggrecan (acan), glycosaminoglycans (GAGs), and collagen type II (Col II).

RESULTS

The results showed that we successfully created a cartilage tissue with some characteristics that mimic the properties of natural cartilage. The engineered cartilage tissue was positive with some cartilage protein, such as acan, GAG, and Coll II. In vitro cartilage presented some natural chondrocyte-like cells. The artificial cartilage tissue was positive for CD14, CD34, CD90, CD105, and HLA-DR and negative for CD44, CD45, and CD73.

CONCLUSION

These results showed that using UCMSCs and growth factor-rich fibril from platelet-rich plasma was feasible to produce engineered cartilage tissue for further experiments or clinical usage.

Molecular Mechanisms of Multi-Organ Failure in COVID-19 and Potential of Stem Cell Therapy

As the number of confirmed cases and deaths occurring from Coronavirus disease 2019 (COVID-19) surges worldwide, health experts are striving hard to fully comprehend the extent of damage caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Although COVID-19 primarily manifests itself in the form of severe respiratory distress, it is also known to cause systemic damage to almost all major organs and organ systems within the body. In this review, we discuss the molecular mechanisms leading to multi-organ failure seen in COVID-19 patients. We also examine the potential of stem cell therapy in treating COVID-19 multi-organ failure cases.

The Usages and Potential Uses of Alginate for Healthcare Applications

Due to their unique properties, alginate-based biomaterials have been extensively used to treat different diseases, and in the regeneration of diverse organs. A lot of research has been done by the different scientific community to develop biofilms for fulfilling the need for sustainable human health. The aim of this review is to hit upon a hydrogel enhancing the scope of utilization in biomedical applications. The presence of active sites in alginate hydrogels can be manipulated for managing various non-communicable diseases by encapsulating, with the bioactive component as a potential site for chemicals in developing drugs, or for delivering macromolecule nutrients. Gels are accepted for cell implantation in tissue regeneration, as they can transfer cells to the intended site. Thus, this review will accelerate advanced research avenues in tissue engineering and the potential of alginate biofilms in the healthcare sector.

Functional heterogeneity of IFN-γ-licensed mesenchymal stromal cell immunosuppressive capacity on biomaterials

Mesenchymal stromal cells (MSCs) are increasingly combined with biomaterials to enhance their therapeutic properties, including their immunosuppressive function. However, clinical trials utilizing MSCs with or without biomaterials have shown limited success, potentially due to their functional heterogeneity across different donors and among different subpopulations of cells. Here, we evaluated the immunosuppressive capacity, as measured by the ability to reduce T-cell proliferation and activation, of interferon-gamma (IFN-γ)-licensed MSCs from multiple donors on fibrin and collagen hydrogels, the two most commonly utilized biomaterials in combination with MSCs in clinical trials worldwide according to ClinicalTrials.gov Variations in the immunosuppressive capacity between IFN-γ-licensed MSC donors on the biomaterials correlated with the magnitude of indoleamine-2,3-dioxygenase activity. Immunosuppressive capacity of the IFN-γ-licensed MSCs depended on the α_V/α₅ integrins when cultured on fibrin and on the α₂/β₁ integrins when cultured on collagen. While all tested MSCs were nearly 100% positive for these integrins, sorted MSCs that expressed higher levels of α_V/α₅ integrins demonstrated greater immunosuppressive capacity with IFN-γ licensing than MSCs that expressed lower levels of these integrins on fibrin. These findings were equivalent for MSCs sorted based on the α₂/β₁ integrins on collagen. These results demonstrate the importance of integrin engagement to IFN-γ licensed MSC immunosuppressive capacity and that IFN-γ-licensed MSC subpopulations of varying immunosuppressive capacity can be identified by the magnitude of integrin expression specific to each biomaterial.

Oral Cavity as a Source of Mesenchymal Stem Cells Useful for Regenerative Medicine in Dentistry

The use of mesenchymal stem cells (MSCs) for regenerative purposes has become common in a large variety of diseases. In the dental and maxillofacial field, there are emerging clinical needs that could benefit from MSC-based therapeutic approaches. Even though MSCs can be isolated from different tissues, such as bone marrow, adipose tissue, etc., and are known for their multilineage differentiation, their different anatomical origin can affect the capability to differentiate into a specific tissue. For instance, MSCs isolated from the oral cavity might be more effective than adipose-derived stem cells (ASCs) for the treatment of dental defects. Indeed, in the oral cavity, there are different sources of MSCs that have been individually proposed as promising candidates for tissue engineering protocols. The therapeutic strategy based on MSCs can be direct, by using cells as components of the tissue to be regenerated, or indirect, aimed at delivering local growth factors, cytokines, and chemokines produced by the MSCs. Here, the authors outline the major sources of mesenchymal stem cells attainable from the oral cavity and discuss their possible usage in some of the most compelling therapeutic frontiers, such as periodontal disease and dental pulp regeneration.

Allogenic Human Umbilical Cord Blood-Derived Mesenchymal Stem Cells Are More Effective Than Bone Marrow Aspiration Concentrate for Cartilage Regeneration After High Tibial Osteotomy in Medial Unicompartmental Osteoarthritis of Knee

PURPOSE

The purpose of this study was to compare the outcome of cartilage regeneration between bone marrow aspirate concentrate (BMAC) augmentation and allogeneic human umbilical cord blood-derived mesenchymal stem cell (hUCB-MSCs) transplantation in high tibial osteotomy (HTO) with microfracture (MFX) for medial unicompartmental osteoarthritis (OA) of the knee in the young and active patient.

METHODS

Between January 2015 and December 2019, the patients who underwent HTO and arthroscopy with MFX combined with BMAC or allogeneic hUCB-MSCs procedure for medial unicompartmental OA with kissing lesion, which was shown full-thickness cartilage defect (≥ International Cartilage Repair Society [ICRS] grade 3B) in medial femoral cartilage and medial tibial cartilage, were include in this study. Retrospectively we compared clinical outcomes, including Hospital for Special Surgery score, Knee Society Score (KSS) pain and function, and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score between BMAC and hUCB-MSCs group at minimum of 1-year follow-up. Also, second-look arthroscopy was performed simultaneously with removal of the plate after complete bone union. Cartilage regeneration was graded by the ICRS grading system at second-look arthroscopy. Radiological measurement including hip-knee-ankle (HKA) angle, posterior tibial slope angle, and correction angle were assessed.

RESULTS

Of 150 cases that underwent HTO with MFX combined with BMAC or allogeneic hUCB-MSCs procedure for medial unicompartmental OA, 123 cases underwent plate removal and second-look arthroscopy after a minimum of 1 year after the HTO surgery. Seventy-four cases were kissing lesion in medial femoral cartilage and medial tibial cartilage during initial HTO surgery. Finally, the BMAC group composed of 42 cases and hUCB-MSCs group composed of 32 cases were retrospectively identified in patients who had kissing lesions and second-look arthroscopies with a minimum of 1 year of follow-up. At the final follow-up of mean 18.7 months (standard deviation = 4.6 months), clinical outcomes in both groups had improved. However, there were no significant differences between the IKDC, WOMAC, or KSS pain and function scores in the 2 groups (P > .05). At second-look arthroscopy, the ICRS grade was significantly better in the hUCB-MSC group than in the BMAC group in both medial femoral and medial tibial cartilage (P = .001 for both). The average ICRS grade of the BMAC group improved from 3.9 before surgery to 2.8 after surgery. The average ICRS grade of the hUBC-MSC group improved from 3.9 before surgery to 2.0 after surgery. Radiological findings comparing postoperative HKA angle, posterior tibial slope angle, and correction angle showed no significant differences between the groups (P > .05). Therefore it was found that the postoperative correction amount did not affect the postoperative cartilage regeneration results.

CONCLUSIONS

We found that the hUCB-MSC procedure was more effective than the BMAC procedure for cartilage regeneration in medial unicompartmental knee OA even though the clinical outcomes improved regardless of which treatment was administered.

LEVEL OF EVIDENCE

Level III, retrospective comparative study.

Sternal Bone Marrow Harvesting and Culturing Techniques from Patients Undergoing Cardiac Surgery

Background: Mesenchymal stromal cells (MSCs) are the most prominent cell type used in clinical regenerative medicine and stem cell research. MSCs are commonly harvested from bone marrow that has been aspirated from patients’ iliac crest. However, the ethical challenges of finding consenting patients and obtaining fresh autologous cells via invasive extraction methods remain to be barriers to MSC research. Methods: Techniques of harvesting sternal bone marrow, isolating and culturing MSCs, MSC surface phenotyping, and MSC differentiation are described. Samples from 50 patients undergoing a sternotomy were collected, and the time taken to reach 80% confluency and cell count at the second splitting of MSC were measured. Results: MSC isolated from the sternal bone marrow of patients undergoing cardiac surgery demonstrated successful MSC surface phenotyping and MSC differentiation. The mean cell count at the time of the second split was 1,628,025, and the mean time taken to reach the second split was 24.8 days. Conclusion: Herein, we describe the first reported technique of harvesting sternal bone marrow from patients already undergoing open-chest cardiac surgery to reduce the invasiveness of bone marrow harvesting, as well as the methods of isolating, culturing, and identifying MSCs for the clinical application of constructing autologous MSC-derived biomaterials.

Stem cell therapies in tendon-bone healing

Tendon-bone insertion injuries such as rotator cuff and anterior cruciate ligament injuries are currently highly common and severe. The key method of treating this kind of injury is the reconstruction operation. The success of this reconstructive process depends on the ability of the graft to incorporate into the bone. Recently, there has been substantial discussion about how to enhance the integration of tendon and bone through biological methods. Stem cells like bone marrow mesenchymal stem cells (MSCs), tendon stem/progenitor cells, synovium-derived MSCs, adipose-derived stem cells, or periosteum-derived periosteal stem cells can self-regenerate and potentially differentiate into different cell types, which have been widely used in tissue repair and regeneration. Thus, we concentrate in this review on the current circumstances of tendon-bone healing using stem cell therapy.

The Outcome of Stem Cell-Based Therapies on the Immune Responses in Rheumatoid Arthritis

Rheumatoid arthritis as a common autoimmune inflammatory disorder with unknown etiology can affect 0.5-1% of adults in developed countries. It involves more than just the patient's joints and can be accompanied by several comorbidities and affect cardiovascular, pulmonary, and some other systems of the human body. Although cytokine-mediated pathways are mentioned to have a central role in RA pathogenesis, adaptive and innate immune systems and intracellular signaling pathways all have important roles in this process. Non-steroidal anti-inflammatory drugs, glucocorticoids, conventional disease-modifying anti-rheumatic drugs, and biological agents are some mentioned medications used for RA. They are accompanied by some adverse effects and treatment failures which elucidates the needing for novel and more powerful therapeutic approaches. Stem cell-based therapies and their beneficial effects on therapeutic processes of different diseases have been founded so far. They can be an alternative and promising therapeutic approach for RA, too; due to their effects on immune responses of the disease. This review, besides some explanations about RA characteristics, addresses the outcome of the stem cell-based therapies including mesenchymal stem cell transplantation and hematopoietic stem cell transplantation for RA and explains their effects on the disease improvement.

Effects of Mechanical Compression on Chondrogenesis of Human Synovium-Derived Mesenchymal Stem Cells in Agarose Hydrogel

Mechanical compression is a double-edged sword for cartilage remodeling, and the effect of mechanical compression on chondrogenic differentiation still remains elusive to date. Herein, we investigate the effect of mechanical dynamic compression on the chondrogenic differentiation of human synovium-derived mesenchymal stem cells (SMSCs). To this aim, SMSCs encapsulated in agarose hydrogels were cultured in chondrogenic-induced medium with or without dynamic compression. Dynamic compression was applied at either early time-point (day 1) or late time-point (day 21) during chondrogenic induction period. We found that dynamic compression initiated at early time-point downregulated the expression level of chondrocyte-specific markers as well as hypertrophy-specific markers compared with unloaded control. On the contrary, dynamic compression applied at late time-point not only enhanced the levels of cartilage matrix gene expression, but also suppressed the hypertrophic development of SMSCs compared with unloaded controls. Taken together, our findings suggest that dynamic mechanical compression loading not only promotes chondrogenic differentiation of SMSCs, but also plays a vital role in the maintenance of cartilage phenotype, and our findings also provide an experimental guide for stem cell-based cartilage repair and regeneration.

Psoralen accelerates osteogenic differentiation of human bone marrow mesenchymal stem cells by activating the TGF-β/Smad3 pathway

Psoralen, one of the active ingredients in Psoralea corylifolia, has been previously reported to regulate the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). A previous study revealed that psoralen can regulate the expression levels of microRNA-488 and runt-related transcription factor 2 (Runx2) to promote the osteogenic differentiation of BMSCs. However, the underlying signalling pathway in this process remains to be fully elucidated. BMSCs have also been confirmed to play a key role in the occurrence and development of osteoporosis, and are expected to be potential seed cells in the treatment of osteoporosis. In order to explore the potential signalling pathways of psoralen acting on BMSCs, in the present study, human BMSCs (hBMSCs) were treated with different concentrations of psoralen (0.1, 1, 10 and 100 µmol/l) and the TGF-β receptor I (RI) inhibitor SB431542 (5 µmol/l) in vitro for 3, 7 or 14 days. Cell Counting Kit-8 and MTT assays were used to measure cell proliferation and cell viability of hBMSCs following psoralen administration. Alkaline phosphatase (ALP) activity and alizarin red S staining were used to assess the osteogenic differentiation ability of hBMSCs. Reverse transcription-quantitative PCR and western blotting were used to measure the expression of osteogenic differentiation-related genes [bone morphogenetic protein 4 (BMP4), osteopontin (OPN), Runx2 and Osterix] and proteins associated with the TGF-β/Smad3 pathway [TGF-β1, TGF-β RI, phosphorylated (p-)Smad and Smad3]. Psoralen was found to increase the proliferation and viability of hBMSCs. Although different concentrations of psoralen enhanced ALP activity and the calcified nodule content in hBMSCs, the enhancement effects were more potent at lower concentrations (0.1, 1 and 10 µmol/l). The expression of BMP4, OPN, Osterix, Runx2, TGF-β1, TGF-β RI and p-Smad3 was also promoted by psoralen at lower concentrations (0.1, 1 and 10 µmol/l). In addition, whilst SB431542 could inhibit calcium deposition and osteogenic differentiation-related gene expression in hBMSCs, psoralen effectively reversed the inhibitory effects of SB431542. In conclusion, psoralen accelerates the osteogenic differentiation of hBMSCs by activating the TGF-β/Smad3 pathway, which may be valuable for the future clinical treatment of osteoporosis.

Developments and Opportunities for 3D Bioprinted Organoids

Organoids developed from pluripotent stem cells or adult stem cells are three-dimensional cell cultures possessing certain key characteristics of their organ counterparts, and they can mimic certain biological developmental processes of organs in vitro. Therefore, they have promising applications in drug screening, disease modeling, and regenerative repair of tissues and organs. However, the construction of organoids currently faces numerous challenges, such as breakthroughs in scale size, vascularization, better reproducibility, and precise architecture in time and space. Recently, the application of bioprinting has accelerated the process of organoid construction. In this review, we present current bioprinting techniques and the application of bioinks and summarize examples of successful organoid bioprinting. In the future, a multidisciplinary combination of developmental biology, disease pathology, cell biology, and materials science will aid in overcoming the obstacles pertaining to the bioprinting of organoids. The combination of bioprinting and organoids with a focus on structure and function can facilitate further development of real organs.

Mesenchyme homeobox 1 mediated-promotion of osteoblastic differentiation is negatively regulated by mir-3064-5p

Human mesenchymal stem cells (hMSCs) are multipotent cells that can be differentiated into different cell types including osteoblasts. Herein we aimed to assess the regulation of transcription factor mesenchyme homeobox 1 (Meox1) in the osteogenic differentiation of hMSCs and to determine the microRNA which targets on Meox1. Total RNA was extracted from the isolated ligamentum flavum tissue samples and cultured hMSCs, and the expression of Meox1 was assessed by RT-PCR and Western blot assays. Cultured hMSCs were induced towards osteoblastic differentiation, and the osteoblast phenotype was determined by alkaline phosphatase activity and alizarin red staining. The microRNA targeting on the 3'-UTR of Meox1was predicted using bioinformatics tool, and the binding was validated by luciferase and RNA pulldown assays. The osteoblastic differentiation of hMSCs was checked with the knockdown of Meox1 and microRNA inhibitors. Higher expression of Meox1, and lower expression of miR-3064-5p in ossified ligamentum flavum (OLF) tissues were identified. In addition, increased expression along with the osteoblastic differentiation of hMSCs was found. Further research revealed that Meox was a direct target of miR-3064-5p, when the former promoted the differentiation of hMSCs into osteoblasts, the latter significantly suppressed the osteogenesis. The expression of Meox1 increased gradually with the osteoblastic differentiation of hMSCs, during which miR-3064-5p decreased. Meox1 is a direct target of miR-3064-5p, and they both play important roles in the osteogenesis. These findings provide potential target for the development of therapeutic drugs for skeletal system diseases.

Poly (L-lactic acid) nanofibrous scaffolds support the proliferation and neural differentiation of mouse neural stem and progenitor cells

BACKGROUND

The distribution and growth of cells on nanofibrous scaffolds seem to be an indispensable precondition in cell tissue engineering. The potential use of biomaterial scaffolds in neural stem cell therapy is increasingly attracting attention.

AIM

In this study, we produced porous nanofibrous scaffolds fabricated from random poly-L-lactic acid (PLLA) to support neurogenic differentiation of neural stem and progenitor cells (NSPCs), isolated from the subventricular zone (SVZ) of the adult mouse brain.

METHODS

The viability and proliferation of the NSPCs on the nanofibrous PLLA scaffold were also tested by nuclear staining with 4, 6-diamidino-2-phenylindole dihydrochloride (DAPI), 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay and scanning electron microscopy (SEM). To investigate the differentiation potential of NSPCs on the scaffolds, the cells were treated with a neurogenic differentiation medium, and immunostaining was done to detect neuronal and glial cells after 14 and 21 days of cultivation. Furthermore, the morphology of differentiated cells on the scaffold was examined using SEM.

RESULTS

The DAPI staining revealed the proliferation of NSPCs onto the surface of the nanofibrous PLLA scaffold. DAPI-positive cells were counted on days 2 and 5 after cultivation. The mean number of cells in each microscopic field was significantly (p < .05) increased (51 ± 19 on day 2 compared to 77 ± 25 cells on day 5). The results showed that the cell viability on PLLA scaffolds significantly increased compared to control groups. Moreover, cell viability was significantly increased 5 days after culturing (262.3 ± 50.2) as compared to 2 days culture in Vitro (174.2 ± 28.3, p < .05). Scanning electron micrographs also showed that the NSPCs adhered and differentiated on PLLA scaffolds. We found that the neural cell markers, microtubule-associated protein 2 (MAP2) and glial fibrillary acidic protein (GFAP), were expressed in NSPCs seeded on random PLLA scaffolds after 21 days of cultivation.

CONCLUSION

These results suggest that the PLLA nano-scaffolds, due to their biocompatible property, are an appropriate structure for the proliferation, differentiation, and normal growth of NSPCs.

Adipose Derived Mesenchymal Stem Cells from a Hypoxic Culture Reduce Cartilage Damage

The method to benifit tissue engineering of adipose-derived stem cells (ADSCs) to cartilage has been an objective of intense research in treating increasing cartilage-related disease. In this study, whether hypoxic expansion would enhance the proliferation and in vitro chondrogenic differentiation of ADSCs was studied, and then hypoxic expansion was applied to reduce cartilage damage in a rat model in vivo. Hypoxic expansion increased the proliferation and decreased the expression of aging-related genes, including p16, p21, and p53, of human ADSCs in comparison with normoxic expansion. In addition, the γH2AX expression was reduced in the hypoxic ADSCs. The chondrogenic markers were enhanced in the hypoxic ADSC differentiated chondrogenic pellets, including SOX9 on day 7 and gene expressions of COL 2 and COL 10 on day 21. To determine the in vitro chondrogenic differentiation potential of ADSCs, ADSC differentiated 21-day chondrogenic pellets were stained by Alcian blue staining and the immunostaining of COL 2 and COL 10, the results of which confirmed the enhancement of differentiation potential after the hypoxic expansion. Moreover, cartilage injury in a rat model was reduced by hypoxic ADSC treatment that was determined by histological and immunohistochemical staining detections. The effects of hypoxic expansion of ADSCs and bone marrow-derived stem cells (BMSCs) on chondrogenic differentiation potential were also compared. Smaller sizes were presented in the in vitro hypoxic BMSC differentiated chondrogenic pellets, whereas the chondrogenic marker expressions were significantly higher than those of the hypoxic ADSCs. However, there was no significant difference between the treatments of the hypoxic ADSCs and BMSCs in the cartilage injury in vivo. In conclusion, hypoxic expansion increases the chondrogenic differentiation potential of ADSCs and BMSCs in vitro and enhances them to reduce cartilage damage in vivo. Although the hypoxic BMSCs showed compact chondrogenic pellet formation and higher potential of chondrogenesis, the easy access and large resources of ADSCs still uplifted the application.

3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors

The field of tissue engineering has progressed tremendously over the past few decades in its ability to fabricate functional tissue substitutes for regenerative medicine and pharmaceutical research. Conventional scaffold-based approaches are limited in their capacity to produce constructs with the functionality and complexity of native tissue. Three-dimensional (3D) bioprinting offers exciting prospects for scaffolds fabrication, as it allows precise placement of cells, biochemical factors, and biomaterials in a layer-by-layer process. Compared with traditional scaffold fabrication approaches, 3D bioprinting is better to mimic the complex microstructures of biological tissues and accurately control the distribution of cells. Here, we describe recent technological advances in bio-fabrication focusing on 3D bioprinting processes for tissue engineering from data processing to bioprinting, mainly inkjet, laser, and extrusion-based technique. We then review the associated bioink formulation for 3D bioprinting of human tissues, including biomaterials, cells, and growth factors selection. The key bioink properties for successful bioprinting of human tissue were summarized. After bioprinting, the cells are generally devoid of any exposure to fluid mechanical cues, such as fluid shear stress, tension, and compression, which are crucial for tissue development and function in health and disease. The bioreactor can serve as a simulator to aid in the development of engineering human tissues from in vitro maturation of 3D cell-laden scaffolds. We then describe some of the most common bioreactors found in the engineering of several functional tissues, such as bone, cartilage, and cardiovascular applications. In the end, we conclude with a brief insight into present limitations and future developments on the application of 3D bioprinting and bioreactor systems for engineering human tissue.

Recombinant adeno-associated virus-based gene therapy combined with tissue engineering for musculoskeletal regenerative medicine

Recombinant adeno-associated viral (rAAV) vector-mediated gene delivery is a novel molecular therapeutic approach for musculoskeletal disorders which achieves tissue regeneration by delivering a transgene to the impaired tissue. In recent years, substantial scientific progress in rAAV gene therapy has led to several clinical trials for human musculoskeletal diseases. Nevertheless, there are still limitations in developing an optimal gene therapy model due to the low transduction efficiency and fast degradation of the gene vectors. To overcome the challenges of rAAV gene therapy, tissue engineering combined with gene therapy has emerged as a more promising alternative. An rAAV viral vector incorporated into a biomaterial has a more controlled gene expression, lower immune response, and higher efficiency. A number of biomaterials and architectures have been combined with rAAV viral vectors, each having its own advantages and limitations. This review aims to give a broad introduction to combinatorial therapy and the recent progress this new technology has offered.

Assessment of human ovarian follicular fluid derived mesenchymal stem cells in chitosan/PCL/Zn scaffold for bone tissue regeneration

Bone tissue engineering compasses the use of mesenchymal stem cells (MSCs) along with engineered biomaterial construct to augment bone regeneration. Till now, MSCs were isolated from various sources and used in cellular constructs. For the first time, in this study, MSCs were isolated from human Ovarian Follicular Fluid (OFF) and characterized by CD 44⁺ and CD 105⁺ markers via confocal microscopy and flow cytometry. Additionally, MSCs stemness, proliferation and colony-forming unit ability, multi-lineage differentiation potential were also studied. To test its suitability for bone tissue engineering applications, we grew the MSCs with the conditioned medium obtained from biocomposite scaffold by fusing a natural polymer, Chitosan (CS) and a synthetic polymer, Polycaprolactone (PCL) and the scaffold were coated with Zinc divalent ions to impart osteogenic properties. The physico-chemical characterization of scaffold, such as FTIR, XRD, and SEM studies was carried out. The biological characterization showed that the scaffolds were compatible with MSCs and promoted osteoblast differentiation which was confirmed at both cellular and molecular levels. The cellular construct increased calcium deposition, analyzed by alizarin red staining and ALP activity at cellular level. At the molecular level, the osteoblast markers expression such as Runx2 and type 1 collagen mRNAs, and osteonectin (ON) and osteocalcin (OC) secretory proteins were increased in the presence of scaffold. Overall, the current study recommends that MSCs can be easily obtained from human waste OFF, and grown in standard in vitro conditions. Successful growth of such MSCs with CS/PCL/Zn scaffold opens new avenues in utilizing the cell source for bone tissue engineering.