An engineered micropattern to reduce bacterial colonization, platelet adhesion and fibrin sheath formation for improved biocompatibility of central venous catheters

Peripherally inserted central catheter design and material for reducing catheter failure and complications

BACKGROUND

Peripherally inserted central catheters (PICCs) facilitate diagnostic and therapeutic interventions in health care. PICCs can fail due to infective and non-infective complications, which PICC materials and design may contribute to, leading to negative sequelae for patients and healthcare systems.

OBJECTIVES

To assess the effectiveness of PICC material and design in reducing catheter failure and complications.

SEARCH METHODS

The University of Queensland and Cochrane Vascular Information Specialist searched the Cochrane Vascular Specialised Register, CENTRAL, MEDLINE, Embase, and CINAHL databases and the WHO ICTRP and ClinicalTrials.gov trials registers to 16 May 2023. We aimed to identify other potentially eligible trials or ancillary publications by searching the reference lists of retrieved included trials, as well as relevant systematic reviews, meta-analyses, and health technology assessment reports. We contacted experts in the field to ascertain additional relevant information.

SELECTION CRITERIA

We included randomised controlled trials (RCTs) evaluating PICC design and materials.

DATA COLLECTION AND ANALYSIS

We used standard Cochrane methods. Our primary outcomes were venous thromboembolism (VTE), PICC-associated bloodstream infection (BSI), occlusion, and all-cause mortality. Secondary outcomes were catheter failure, PICC-related BSI, catheter breakage, PICC dwell time, and safety endpoints. We assessed the certainty of evidence using GRADE.

MAIN RESULTS

We included 12 RCTs involving approximately 2913 participants (one multi-arm study). All studies except one had a high risk of bias in one or more risk of bias domain. Integrated valve technology compared to no valve technology for peripherally inserted central catheter design Integrated valve technology may make little or no difference to VTE risk when compared with PICCs with no valve (risk ratio (RR) 0.71, 95% confidence interval (CI) 0.19 to 2.63; I² = 0%; 3 studies; 437 participants; low certainty evidence). We are uncertain whether integrated valve technology reduces PICC-associated BSI risk, as the certainty of the evidence is very low (RR 0.20, 95% CI 0.01 to 4.00; I² = not applicable; 2 studies (no events in 1 study); 257 participants). Integrated valve technology may make little or no difference to occlusion risk when compared with PICCs with no valve (RR 0.86, 95% CI 0.53 to 1.38; I² = 0%; 5 studies; 900 participants; low certainty evidence). We are uncertain whether use of integrated valve technology reduces all-cause mortality risk, as the certainty of evidence is very low (RR 0.85, 95% CI 0.44 to 1.64; I² = 0%; 2 studies; 473 participants). Integrated valve technology may make little or no difference to catheter failure risk when compared with PICCs with no valve (RR 0.80, 95% CI 0.62 to 1.03; I² = 0%; 4 studies; 720 participants; low certainty evidence). We are uncertain whether integrated-valve technology reduces PICC-related BSI risk (RR 0.51, 95% CI 0.19 to 1.32; I² = not applicable; 2 studies (no events in 1 study); 542 participants) or catheter breakage, as the certainty of evidence is very low (RR 1.05, 95% CI 0.22 to 5.06; I² = 20%; 4 studies; 799 participants). Anti-thrombogenic surface modification compared to no anti-thrombogenic surface modification for peripherally inserted central catheter design We are uncertain whether use of anti-thrombogenic surface modified catheters reduces risk of VTE (RR 0.67, 95% CI 0.13 to 3.54; I² = 15%; 2 studies; 257 participants) or PICC-associated BSI, as the certainty of evidence is very low (RR 0.20, 95% CI 0.01 to 4.00; I² = not applicable; 2 studies (no events in 1 study); 257 participants). We are uncertain whether use of anti-thrombogenic surface modified catheters reduces occlusion (RR 0.69, 95% CI 0.04 to 11.22; I² = 70%; 2 studies; 257 participants) or all-cause mortality risk, as the certainty of evidence is very low (RR 0.49, 95% CI 0.05 to 5.26; I² = not applicable; 1 study; 111 participants). Use of anti-thrombogenic surface modified catheters may make little or no difference to risk of catheter failure (RR 0.76, 95% CI 0.37 to 1.54; I² = 46%; 2 studies; 257 participants; low certainty evidence). No PICC-related BSIs were reported in one study (111 participants). As such, we are uncertain whether use of anti-thrombogenic surface modified catheters reduces PICC-related BSI risk (RR not estimable; I² = not applicable; very low certainty evidence). We are uncertain whether use of anti-thrombogenic surface modified catheters reduces the risk of catheter breakage, as the certainty of evidence is very low (RR 0.15, 95% CI 0.01 to 2.79; I² = not applicable; 2 studies (no events in 1 study); 257 participants). Antimicrobial impregnation compared to non-antimicrobial impregnation for peripherally inserted central catheter design We are uncertain whether use of antimicrobial-impregnated catheters reduces VTE risk (RR 0.54, 95% CI 0.05 to 5.88; I² = not applicable; 1 study; 167 participants) or PICC-associated BSI risk, as the certainty of evidence is very low (RR 2.17, 95% CI 0.20 to 23.53; I² = not applicable; 1 study; 167 participants). Antimicrobial-impregnated catheters probably make little or no difference to occlusion risk (RR 1.00, 95% CI 0.57 to 1.74; I² = 0%; 2 studies; 1025 participants; moderate certainty evidence) or all-cause mortality (RR 1.12, 95% CI 0.71 to 1.75; I² = 0%; 2 studies; 1082 participants; moderate certainty evidence). Antimicrobial-impregnated catheters may make little or no difference to risk of catheter failure (RR 1.04, 95% CI 0.82 to 1.30; I² = not applicable; 1 study; 221 participants; low certainty evidence). Antimicrobial-impregnated catheters probably make little or no difference to PICC-related BSI risk (RR 1.05, 95% CI 0.71 to 1.55; I² = not applicable; 2 studies (no events in 1 study); 1082 participants; moderate certainty evidence). Antimicrobial-impregnated catheters may make little or no difference to risk of catheter breakage (RR 0.86, 95% CI 0.19 to 3.83; I² = not applicable; 1 study; 804 participants; low certainty evidence).

AUTHORS' CONCLUSIONS

There is limited high-quality RCT evidence available to inform clinician decision-making for PICC materials and design. Limitations of the current evidence include small sample sizes, infrequent events, and risk of bias. There may be little to no difference in the risk of VTE, PICC-associated BSI, occlusion, or mortality across PICC materials and designs. Further rigorous RCTs are needed to reduce uncertainty.

Characteristics and Outcome of Vascular Graft Infections: A Risk Factor and Survival Analysis

Background

Vascular graft infection (VGI) is a serious complication after implantation of arterial vascular grafts. Optimal surgical and pathogen-specific antimicrobial treatment regimens for VGI are largely unknown. We evaluated patients with arterial VGI according to onset, location, microbiological and imaging characteristics, and surgical and antimicrobial treatment and performed an outcome evaluation.

Methods

Consecutive patients with VGI treated in 2 hospitals from 2010 through 2020 were retrospectively analyzed. Uniform definition criteria and standardized outcome evaluation were applied. Logistic regression was used for multiple analysis; survival analysis was performed with Kaplan-Meier analysis and a log-rank test.

Results

Seventy-eight patients with VGI were included: 30 early-onset cases (<8 weeks after graft implantation) and 48 late-onset cases, involving 49 aortic and 29 peripheral grafts. The median time from initial implantation to diagnosis of VGI was significantly longer in aortic than peripheral VGIs (363 vs 56 days, P = .018). Late-onset VGI (odds ratio [OR], 7.3; P = .005) and the presence of surgical site infection/complication (OR, 8.21; P = .006) were independent risk factors for treatment failure. Surgical site infection/complication was associated with a higher risk for early-onset VGI (OR, 3.13; P = .040). Longer infection-free survival was observed in cases where the infected graft was surgically removed (P = .037).

Conclusions

This study underlines the importance of timely diagnosis of VGI and preventing surgical site infections/complications at graft implantation. It highlights the complexity of infection eradication, especially for late-onset infections, and the importance of adequate antimicrobial and surgical treatment.

In vivo assessment of dual-function submicron textured nitric oxide releasing catheters in a 7-day rabbit model

Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. Herein, a dualfunction submicron textured nitric oxide (NO)-releasing catheter was developed. The hemocompatibility and antithrombotic activity of vascular catheters were evaluated in both 20 h in vitro blood loop and 7 d in vivo rabbit model. Surface characterization assessments via atomic force microscopy show the durability of the submicron pattern after incorporation of NO donor S-nitroso-N-acetylpenicillamine (SNAP). The SNAP-doped catheters exhibited prolonged and controlled NO release mimicking the levels released by endothelium. Fabricated catheters showed cytocompatibility when evaluated against BJ human fibroblast cell lines. After 20h in vitro evaluation of catheters in a blood loop, textured-NO catheters exhibited a 13-times reduction in surface thrombus formation compared to the control catheters, which had 83% of the total area covered by clots. After the 7 d in vivo rabbit model, analysis on the catheter surface was examined via scanning electron microscopy, where significant reduction of platelet adhesion, fibrin mesh, and thrombi can be observed on the NO-releasing textured surfaces. Moreover, compared to relative controls, a 63% reduction in the degree of thrombus formation within the jugular vein was observed. Decreased levels of fibrotic tissue decomposition on the jugular vein and reduced platelet adhesion and thrombus formation on the texture of the NO-releasing catheter surface are indications of mitigated foreign body response. This study demonstrated a biocompatible and robust dual-functioning textured NO PU catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. STATEMENT OF SIGNIFICANCE: Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. This study demonstrated a robust, biocompatible, dual-functioning textured nitric oxide (NO) polyurethane catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. The fabricated catheters exhibited prolonged and controlled NO release that mimics endothelium levels. After the 7 d in vivo model, a significant reduction in platelet adhesion, fibrin mesh, and thrombi was observed on the NO-releasing textured catheters, along with decreased levels of fibrotic tissue decomposition on the jugular vein. Results illustrate that NO-textured catheter surface mitigates foreign body response.

A review on antimicrobial strategies in mitigating biofilm-associated infections on medical implants

Biomedical implants are crucial in providing support and functionality to patients with missing or defective body parts. However, implants carry an inherent risk of bacterial infections that are biofilm-associated and lead to significant complications. These infections often result in implant failure, requiring replacement by surgical restoration. Given these complications, it is crucial to study the biofilm formation mechanism on various biomedical implants that will help prevent implant failures. Therefore, this comprehensive review explores various types of implants (e.g., dental implant, orthopedic implant, tracheal stent, breast implant, central venous catheter, cochlear implant, urinary catheter, intraocular lens, and heart valve) and medical devices (hemodialyzer and pacemaker) in use. In addition, the mechanism of biofilm formation on those implants, and their pathogenesis were discussed. Furthermore, this article critically reviews various approaches in combating implant-associated infections, with a special emphasis on novel non-antibiotic alternatives to mitigate biofilm infections.

Successful Removal and Replacement of a Stuck Hemodialysis Catheter via Thoracotomy: Report of Two Cases and Literature Review

Introduction

Stuck tunneled central venous catheters (CVCs) have been increasingly reported. In rare cases, the impossibility of extracting the CVC from the central vein after regular traction is the result of rigid adhesions to the surrounding fibrin sheath. Forced traction during catheter removal can cause serious complications, including cardiac tamponade, hemothorax, and hemorrhagic shock. Knowledge and experience on how to properly manage the stuck catheter are still limited.

Case Presentation

Here, we present two cases that highlight the successful removal of the stuck tunneled CVC via thoracotomy through the close collaboration of multidisciplinary specialists in the best possible way. Both patients underwent an unsuccessful attempt at thrombolytic therapy with urokinase, catheter traction under the guidance of digital subtraction angiography and intraluminal balloon dilation. And we reviewed the literature on stuck catheters in the hope of providing knowledge and effective approaches to attempted removal of stuck catheters.

Conclusion

There is no standardized procedure for dealing with stuck catheters. Intraluminal percutaneous transluminal angioplasty should be considered as the first-line treatment, while open surgery represents a second option only in the event of failure. Care must be taken that forced extubation can cause patients life-threatening.

Advances in Regulating Cellular Behavior Using Micropatterns

Micropatterns, characterized as distinct physical microstructures or chemical adhesion matrices on substance surfaces, have emerged as a powerful tool for manipulating cellular activity. By creating specific extracellular matrix microenvironments, micropatterns can influence various cell behaviors, including orientation, proliferation, migration, and differentiation. This review provides a comprehensive overview of the latest advancements in the use of micropatterns for cell behavior regulation. It discusses the influence of micropattern morphology and coating on cell behavior and the underlying mechanisms. It also highlights future research directions in this field, aiming to inspire new investigations in materials medicine, regenerative medicine, and tissue engineering. The review underscores the potential of micropatterns as a novel approach for controlling cell behavior, which could pave the way for breakthroughs in various biomedical applications.

Bacterial Biofilm Formation on Biomaterials and Approaches to Its Treatment and Prevention

Bacterial biofilms can cause widespread infection. In addition to causing urinary tract infections and pulmonary infections in patients with cystic fibrosis, biofilms can help microorganisms adhere to the surfaces of various medical devices, causing biofilm-associated infections on the surfaces of biomaterials such as venous ducts, joint prostheses, mechanical heart valves, and catheters. Biofilms provide a protective barrier for bacteria and provide resistance to antimicrobial agents, which increases the morbidity and mortality of patients. This review summarizes biofilm formation processes and resistance mechanisms, as well as the main features of clinically persistent infections caused by biofilms. Considering the various infections caused by clinical medical devices, we introduce two main methods to prevent and treat biomaterial-related biofilm infection: antibacterial coatings and the surface modification of biomaterials. Antibacterial coatings depend on the covalent immobilization of antimicrobial agents on the coating surface and drug release to prevent and combat infection, while the surface modification of biomaterials affects the adhesion behavior of cells on the surfaces of implants and the subsequent biofilm formation process by altering the physical and chemical properties of the implant material surface. The advantages of each strategy in terms of their antibacterial effect, biocompatibility, limitations, and application prospects are analyzed, providing ideas and research directions for the development of novel biofilm infection strategies related to therapeutic materials.

Modulation of MG-63 Osteogenic Response on Mechano-Bactericidal Micronanostructured Titanium Surfaces

Despite recent advances in the development of orthopedic devices, implant-related failures that occur as a result of poor osseointegration and nosocomial infection are frequent. In this study, we developed a multiscale titanium (Ti) surface topography that promotes both osteogenic and mechano-bactericidal activity using a simple two-step fabrication approach. The response of MG-63 osteoblast-like cells and antibacterial activity toward Pseudomonas aeruginosa and Staphylococcus aureus bacteria was compared for two distinct micronanoarchitectures of differing surface roughness created by acid etching, using either hydrochloric acid (HCl) or sulfuric acid (H₂SO₄), followed by hydrothermal treatment, henceforth referred to as either MN-HCl or MN-H₂SO₄. The MN-HCl surfaces were characterized by an average surface microroughness (S_a) of 0.8 ± 0.1 μm covered by blade-like nanosheets of 10 ± 2.1 nm thickness, whereas the MN-H₂SO₄ surfaces exhibited a greater S_a value of 5.8 ± 0.6 μm, with a network of nanosheets of 20 ± 2.6 nm thickness. Both micronanostructured surfaces promoted enhanced MG-63 attachment and differentiation; however, cell proliferation was only significantly increased on MN-HCl surfaces. In addition, the MN-HCl surface exhibited increased levels of bactericidal activity, with only 0.6% of the P. aeruginosa cells and approximately 5% S. aureus cells remaining viable after 24 h when compared to control surfaces. Thus, we propose the modulation of surface roughness and architecture on the micro- and nanoscale to achieve efficient manipulation of osteogenic cell response combined with mechanical antibacterial activity. The outcomes of this study provide significant insight into the further development of advanced multifunctional orthopedic implant surfaces.

Titanium surface polyethylene glycol hydrogel and gentamicin-loaded cross-linked starch microspheres release system for anti-infective drugs

OBJECTIVE

To design and construct a hydrogel drug-controlled release system loaded with gentamicin on a titanium surface, and to evaluate the in vitro drug release behaviour and antibacterial properties and biocompatibility of the controlled release system.

METHODS

Titanium (Ti) surface was coated with poly dopamine (PDA) substrate, and then polyethylene glycol (PEG) was attached to PDA. The composite drug microsphere controlled release layer formed by gentamicin (GEN) and cross-linked starch (CSt) were subsequently covered with poly lactic⁃co⁃glycolic acid (PLGA) as a barrier to construct a Ti-GEN-Cst-PLGA anti-infective drug controlled release system.

RESULTS

The hydrogel drug release system was successfully constructed. The results of in vitro anti-staphylococcus aureus (SAU) assay, anti-staphylococcus epidermidis (SEP) assay and anti-Escherichia coli (ECO) assay showed that Ti-GEN-Cst-PLGA could effectively inhibit the growth of three bacteria. Assay in the New Zealand rabbit found that Ti-GEN-Cst-PLGA could promote wound healing at the 3rd week after implantation, and the pathology assay found that the Ti-GEN-Cst-PLGA group had less inflammatory reactions and significant tissue proliferation at the endophyte contact surface.

CONCLUSION

Ti-GEN-Cst-PLGA can effectively inhibit the inflammatory response and promote wound healing, or may be a potential treatment for orthopaedic endophytes.

Bio-inspired hemocompatible surface modifications for biomedical applications

When blood first encounters the artificial surface of a medical device, a complex series of biochemical reactions is triggered, potentially resulting in clinical complications such as embolism/occlusion, inflammation, or device failure. Preventing thrombus formation on the surface of blood-contacting devices is crucial for maintaining device functionality and patient safety. As the number of patients reliant on blood-contacting devices continues to grow, minimizing the risk associated with these devices is vital towards lowering healthcare-associated morbidity and mortality. The current standard clinical practice primarily requires the systemic administration of anticoagulants such as heparin, which can result in serious complications such as post-operative bleeding and heparin-induced thrombocytopenia (HIT). Due to these complications, the administration of antithrombotic agents remains one of the leading causes of clinical drug-related deaths. To reduce the side effects spurred by systemic anticoagulation, researchers have been inspired by the hemocompatibility exhibited by natural phenomena, and thus have begun developing medical-grade surfaces which aim to exhibit total hemocompatibility via biomimicry. This review paper aims to address different bio-inspired surface modifications that increase hemocompatibility, discuss the limitations of each method, and explore the future direction for hemocompatible surface research.

Bioselectivity of silk protein-based materials and their bio-inspired applications

Adhesion to material surfaces is crucial for almost all organisms regarding subsequent biological responses. Mammalian cell attachment to a surrounding biological matrix is essential for maintaining their survival and function concerning tissue formation. Conversely, the adhesion and presence of microbes interferes with important multicellular processes of tissue development. Therefore, tailoring bioselective, biologically active, and multifunctional materials for biomedical applications is a modern focus of biomaterial research. Engineering biomaterials that stimulate and interact with cell receptors to support binding and subsequent physiological responses of multicellular systems attracted much interest in the last years. Further to this, the increasing threat of multidrug resistance of pathogens against antibiotics to human health urgently requires new material concepts for preventing microbial infestation and biofilm formation. Thus, materials exhibiting microbial repellence or antimicrobial behaviour to reduce inflammation, while selectively enhancing regeneration in host tissues are of utmost interest. In this context, protein-based materials are interesting candidates due to their natural origin, biological activity, and structural properties. Silk materials, in particular those made of spider silk proteins and their recombinant counterparts, are characterized by extraordinary properties including excellent biocompatibility, slow biodegradation, low immunogenicity, and non-toxicity, making them ideally suited for tissue engineering and biomedical applications. Furthermore, recombinant production technologies allow for application-specific modification to develop adjustable, bioactive materials. The present review focusses on biological processes and surface interactions involved in the bioselective adhesion of mammalian cells and repellence of microbes on protein-based material surfaces. In addition, it highlights the importance of materials made of recombinant spider silk proteins, focussing on the progress regarding bioselectivity.

Bioinspired Topographic Surface Modification of Biomaterials

Physical surface modification is an approach that has been investigated over the last decade to reduce bacterial adhesion and improve cell attachment to biomaterials. Many techniques have been reported to modify surfaces, including the use of natural sources as inspiration to fabricate topographies on artificial surfaces. Biomimetics is a tool to take advantage of nature to solve human problems. Physical surface modification using animal and vegetal topographies as inspiration to reduce bacterial adhesion and improve cell attachment has been investigated in the last years, and the results have been very promising. However, just a few animal and plant surfaces have been used to modify the surface of biomaterials with these objectives, and only a small number of bacterial species and cell types have been tested. The purpose of this review is to present the most current results on topographic surface modification using animal and plant surfaces as inspiration to modify the surface of biomedical materials with the objective of reducing bacterial adhesion and improving cell behavior.

Nitric oxide-releasing polyurethane/S-nitrosated keratin mats for accelerating wound healing

Nitric oxide (NO) plays an important role in wound healing, due to its ability to contract wound surfaces, dilate blood vessels, participate in inflammation as well as promote collagen synthesis, angiogenesis and fibroblast proliferation. Herein, keratin was first nitrosated to afford S-nitrosated keratin (KSNO). As a NO donor, KSNO was then co-electrospun with polyurethane (PU). These as-spun PU/KSNO biocomposite mats could release NO sustainably for 72 h, matching the renewal time of the wound dressing. Moreover, these mats exhibited excellent cytocompatibility with good cell adhesion and cell migration. Further, the biocomposite mats exhibited antibacterial properties without inducing severe inflammatory responses. The wound repair in vivo demonstrated that these mats accelerated wound healing by promoting tissue formation, collagen deposition, cell migration, re-epithelialization and angiogenesis. Overall, PU/KSNO mats may be promising candidates for wound dressing.

Biomimetic microcavity interfaces for a label-free capture of pathogens in the fluid bloodstream by vortical crossflow filtration

Bacterial sepsis is a lethal disease triggered by microbial pathogens. The blood pathogen load is a major contributor to both disease severity and mortality in patients with sepsis blood. Therefore, it is crucial to reduce the load of pathogens, in particular the drug-resistant pathogens. In this work, inspired by the crossflow filtration mechanism in suspension-feeding fish, we developed a biomimetic microcavity interface to mimic a porous gill-raker surface as a blood-cleansing dialyzer for sepsis therapy, which can rapidly, safely and efficiently clear bacteria from the fluidic blood. The microcavity interface consists of microcavity arrays, the innerface of which contains nanowire forests. By precisely controlling the pore size of the microcavity and directing the axial travel of the fluid, the bacteria can be isolated from the whole blood without disturbing any blood components or blocking the blood cell transportation. In addition, the three-dimensional nanowire forests assist in the formation of vortices with reduced blood flow velocity and increased resistance to bacterial deposition in situ. Functional modification is not required to recognize the bacteria specifically in our designed dialyzer. Moreover, the microcavity interface clears over 95% bacteria from a fluid blood sample without inducing protein adsorption or complement and platelet activation when contacting the fluid blood. The study supports this biomimetic microcavity interface to be a promising extracorporeal blood-cleansing device in clinical settings.

Microtopographical patterns promote different responses in fibroblasts and Schwann cells: A possible feature for neural implants

The chronic reliability of bioelectronic neural interfaces has been challenged by foreign body reactions (FBRs) resulting in fibrotic encapsulation and poor integration with neural tissue. Engineered microtopographies could alleviate these challenges by manipulating cellular responses to the implanted device. Parallel microchannels have been shown to modulate neuronal cell alignment and axonal growth, and Sharklet™ microtopographies of targeted feature sizes can modulate bio-adhesion of an array of bacteria, marine organisms, and epithelial cells due to their unique geometry. We hypothesized that a Sharklet™ micropattern could be identified that inhibited fibroblasts partially responsible for FBR while promoting Schwann cell proliferation and alignment. in vitro cell assays were used to screen the effect of Sharklet™ and channel micropatterns of varying dimensions from 2 to 20 μm on fibroblast and Schwann cell metrics (e.g., morphology/alignment, nuclei count, metabolic activity), and a hierarchical analysis of variance was used to compare treatments. In general, Schwann cells were found to be more metabolically active and aligned than fibroblasts when compared between the same pattern. 20 μm wide channels spaced 2 μm apart were found to promote Schwann cell attachment and alignment while simultaneously inhibiting fibroblasts and warrant further in vivo study on neural interface devices. No statistically significant trends between cellular responses and geometrical parameters were identified because mammalian cells can change their morphology dependent on their environment in a manner dissimilar to bacteria. Our results showed although surface patterning is a strong physical tool for modulating cell behavior, responses to micropatterns are highly dependent on the cell type.

Surface texture limits transfer of S. aureus, T4 bacteriophage, influenza B virus and human coronavirus

Spread of pathogens on contaminated surfaces plays a key role in disease transmission. Surface technologies that control pathogen transfer can help control fomite transmission and are of great interest to public health. Here, we report a novel bead transfer method for evaluating fomite transmission in common laboratory settings. We show that this method meets several important criteria for quantitative test methods, including reasonableness, relevancy, resemblance, responsiveness, and repeatability, and therefore may be adaptable for standardization. In addition, this method can be applied to a wide variety of pathogens including bacteria, phage, and human viruses. Using the bead transfer method, we demonstrate that an engineered micropattern limits transfer of Staphylococcus aureus by 97.8% and T4 bacteriophage by 93.0% on silicone surfaces. Furthermore, the micropattern significantly reduces transfer of influenza B virus and human coronavirus on silicone and polypropylene surfaces. Our results highlight the potential of using surface texture as a valuable new strategy in combating infectious diseases.

Presence of retained calcified fibrin sheath after central venous catheter removal: A systematic literature review

Central venous catheters (CVC) are used in many clinical settings for a variety of indications. We performed a systematic literature review concerning case reports of retained calcified fibrin sheaths after dialysis CVC removal. The aim of our study was to systematize the knowledge regarding clinical management of this phenomenon, placing special emphasis on diagnostic radiological features in different imaging modalities, including chest radiography, echocardiography, computed tomography, and magnetic resonance imaging. We discuss the most common risk factors associated with this CVC complication. In our review, we found eight cases of hemodialysis patients. The most common risk factors associated with calcified fibrin sheath formation in the analyzed cases were pro-thrombotic and pro-calcification factors related to patient comorbidities, and prolonged catheter dwell time. Differentiating between a calcified fibrin sheath (present in about 6% of patients with long-term indwelling CVC as diagnosed by computed tomography) and a retained catheter tip can be challenging. The initial diagnosis based on imaging methods was incorrect in most of the analyzed cases. This suggests that some cases of retained fibrin sheaths may remain undetected or misinterpreted. This is important in patients with known pro-thrombotic and pro-calcification risk factors and prolonged catheter dwell time. Therefore, implementation of preventive strategies, familiarity with radiological findings of this phenomenon, comparison with previous imaging studies, and an overall comprehensive assessment with clinical data is imperative.

A scope at antifouling strategies to prevent catheter-associated infections

The use of invasive medical devices is becoming more common nowadays, with catheters representing one of the most used medical devices. However, there is a risk of infection associated with the use of these devices, since they are made of materials that are prone to bacterial adhesion with biofilm formation, often requiring catheter removal as the only therapeutic option. Catheter-related urinary tract infections (CAUTIs) and central line-associated bloodstream infections (CLABSIs) are among the most common causes of healthcare-associated infections (HAIs) worldwide while endotracheal intubation is responsible for ventilator-associated pneumonia (VAP). Therefore, to avoid the use of biocides due to the potential risk of bacterial resistance development, antifouling strategies aiming at the prevention of bacterial adherence and colonization of catheter surfaces represent important alternative measures. This review is focused on the main strategies that are able to modify the physical or chemical properties of biomaterials, leading to the creation of antiadhesive surfaces. The most promising approaches include coating the surfaces with hydrophilic polymers, such as poly(ethylene glycol) (PEG), poly(acrylamide) and poly(acrylates), betaine-based zwitterionic polymers and amphiphilic polymers or the use of bulk-modified poly(urethanes). Natural polysaccharides and its modifications with heparin, have also been used to improve hemocompatibility. Recently developed bioinspired techniques yielding very promising results in the prevention of bacterial adhesion and colonization of surfaces include slippery liquid-infused porous surfaces (SLIPS) based on the superhydrophilic rim of the pitcher plant and the Sharklet topography inspired by the shark skin, which are potential candidates as surface-modifying approaches for biomedical devices. Concerning the potential application of most of these strategies in catheters, more in vivo studies and clinical trials are needed to assure their efficacy and safety for possible future use.

Surface modification strategies for hemodialysis catheters to prevent catheter-related infections: A review

Insertion of a central venous catheter is one of the most common invasive procedures applied in hemodialysis therapy for end-stage renal disease. The most important complication of a central venous catheter is catheter-related infections that increase hospitalization and duration of intensive care unit stay, cost of treatment, mortality, and morbidity rates. Pathogenic microorganisms, such as, bacteria and fungi, enter the body from the catheter insertion site and the surface of the catheter can become colonized. The exopolysaccharide-based biofilms from bacterial colonies on the surface are the main challenge in the treatment of infections. Catheter lock solutions and systemic antibiotic treatment, which are commonly used in the treatment of hemodialysis catheter-related infections, are insufficient to prevent and terminate the infections and eventually the catheter needs to be replaced. The inadequacy of these approaches in termination and prevention of infection revealed the necessity of coating of hemodialysis catheters with bactericidal and/or antiadhesive agents. Silver compounds and nanoparticles, anticoagulants (e.g., heparin), antibiotics (e.g., gentamicin and chlorhexidine) are some of the agents used for this purpose. The effectiveness of few commercial hemodialysis catheters that were coated with antibacterial agents has been tested in clinical trials against catheter-related infections of pathogenic bacteria, such as Staphylococcus aureus and Staphylococcus epidermidis with promising results. Novel biomedical materials and engineering techniques, such as, surface micro/nano patterning and the conjugation of antimicrobial peptides, enzymes, metallic cations, and hydrophilic polymers (e.g., poly [ethylene glycol]) on the surface, has been suggested recently.

Minimising Blood Stream Infection: Developing New Materials for Intravascular Catheters

Catheter related blood stream infection is an ever present hazard for those patients requiring venous access and particularly for those requiring long term medication. The implementation of more rigorous care bundles and greater adherence to aseptic techniques have yielded substantial reductions in infection rates but the latter is still far from acceptable and continues to place a heavy burden on patients and healthcare providers. While advances in engineering design and the arrival of functional materials hold considerable promise for the development of a new generation of catheters, many challenges remain. The aim of this review is to identify the issues that presently impact catheter performance and provide a critical evaluation of the design considerations that are emerging in the pursuit of these new catheter systems.

Functionalized biomaterials to combat biofilms

Pathogenic microbial biofilms that readily form on implantable medical devices or human tissues have posed a great threat to worldwide healthcare. Hopes are focused on preventive strategies towards biofilms, leaving a thought-provoking question: how to tackle the problem of established biofilms? In this review, we briefly summarize the functionalized biomaterials to combat biofilms and highlight current approaches to eradicate pre-existing biofilms. We believe that all of these strategies, alone or in combination, could represent a blueprint for fighting biofilm-associated infections in the postantibiotic era.

Right atrial catheter "ghost" removal by cardiac surgery: A pediatric case series report

Fibrin sheath formation around long-term indwelling central venous catheters is common and usually benign. Fibrin sheath can persist after catheter removal and rarely leads to complications. This is a report of three pediatric oncology patients that required cardiac surgery for cardiac embolization of a "ghost" catheter several years after catheter removal. One case required tricuspid valve replacement for complete tricuspid valve destruction and two had erosion through the atrial wall. The severity of these rare complications mandates follow-up of "ghost" catheters in pediatric oncology patients.

Peripherally inserted central catheters inserted with current best practices have low deep vein thrombosis and central line–associated bloodstream infection risk compared with centrally inserted central catheters: A contemporary meta-analysis

Background:

Peripherally inserted central catheters and centrally inserted central catheters have numerous benefits but can be associated with risks. This meta-analysis compared central catheters for relevant clinical outcomes using recent studies more likely to coincide with practice guidelines.

Methods:

Several databases, Ovid MEDLINE, Embase, and EBM Reviews were searched for articles (2006–2018) that compared central catheters. Analyses were limited to peer-reviewed studies comparing peripherally inserted central catheters to centrally inserted central catheters for deep vein thrombosis and/or central line–associated bloodstream infections. Subgroup, sensitivity analyses, and patient-reported measures were included. Risk ratios, incidence rate ratios, and weighted event risks were reported. Study quality assessment was conducted using Newcastle–Ottawa and Cochrane Risk of Bias scales.

Results:

Of 4609 screened abstracts, 31 studies were included in these meta-analyses. Across studies, peripherally inserted central catheters were protective for central line–associated bloodstream infection (incidence rate ratio = 0.52, 95% confidence interval: 0.30–0.92), with consistent results across subgroups. Peripherally inserted central catheters were associated with an increased risk of deep vein thrombosis (risk ratio = 2.08, 95% confidence interval: 1.47–2.94); however, smaller diameter and single-lumen peripherally inserted central catheters were no longer associated with increased risk. The absolute risk of deep vein thrombosis was calculated to 2.3% and 3.9% for smaller diameter peripherally inserted central catheters and centrally inserted central catheters, respectively. On average, peripherally inserted central catheter patients had 11.6 more catheter days than centrally inserted central catheter patients ( p = 0.064). Patient outcomes favored peripherally inserted central catheters.

Conclusion:

When adhering to best practices, this study demonstrated that concerns related to peripherally inserted central catheters and deep vein thrombosis risk are minimized. Dramatic changes to clinical practice over the last 10 years have helped to address past issues with central catheters and complication risk. Given the lower rate of complications when following current guidelines, clinicians should prioritize central line choice based on patient therapeutic needs, rather than fear of complications. Future research should continue to consider contemporary literature over antiquated data, such that it recognizes the implications of best practices in modern central catheterization.

Exposure of Smaller and Oxidized Graphene on Polyurethane Surface Improves its Antimicrobial Performance

Catheter-related infections are a common worldwide health problem, highlighting the need for antimicrobial catheters. Here, antibacterial potential of graphene nanoplatelets (GNP) incorporated in the commonly used polymer for catheter manufacture-polyurethane (PU)-is investigated. Two strategies are explored: melt-blending, producing a composite, and dip coating, where a composite layer is deposited on top of PU. GNP with different lateral sizes and oxidation degrees-GNP-M5, GNP-M15, GNP-M5ox, GNP-M15ox-are applied in both strategies, and the antimicrobial potential towards Staphylococcus epidermidis of GNP dispersions and GNP-containing PU evaluated. As dispersions, oxidized and smaller GNP powders (GNP-M5ox) inhibit 74% bacteria growth at 128 µg/mL. As surfaces, GNP exposure strongly impacts their antimicrobial profile: GNP absence at the surface of composites yields no significant effects on bacteria, while by varying GNP: PU ratio and GNP concentration, coatings enhance GNP exposure, depicting an antimicrobial profile. Oxidized GNP-containing coatings induce higher antibacterial effect than non-oxidized forms, particularly with smaller GNPox, where a homogeneous layer of fused platelets is formed on PU, leading to 70% reduction in bacterial adhesion and 70% bacterial death. This pioneering work unravels how to turn a polymer clinically used to produce catheters into an antimicrobial surface, crucial to reducing risk of infection associated with catheterization.

Nanoparticles at biointerfaces: Antibacterial activity and nanotoxicology

Development of a biomaterial that is resistant to the adhesion and consequential proliferation of bacteria, represents a significant challenge in terms of application of such materials in various aspects of health care. Over recent years a large number of synthetic methods have appeared with the overall goal of the prevention of bacterial adhesion to surfaces. In contrast to these artificial techniques, living organisms over millions of years have developed different systems to prevent the colonization of microorganisms. Recently, these natural approaches, which are based on surface nanotopography, have been mimicked to fabricate a modern antibacterial surface. In this vein, use of nanoparticle (NP) technology has been explored in order to create a suitable antibacterial surface. However, few studies have focused on the toxicity of these techniques and the ecotoxicity of NP materials on mammalian and bacterial cells simultaneously. Researchers have observed that the majority of previous studies have demonstrated some of the extents of the harmful impacts on mammalian cells. Here, we provide a critical review of the NP approach to antibacterial surface treatment, and also summarize the studies of toxic effects caused by metal NPs on bacteria and mammalian cells.

Bifunctional Bioactive Polymer Surfaces with Micrometer and Submicrometer-sized Structure: The Effects of Structure Spacing and Elastic Modulus on Bioactivity

This study presents a comparison of two types of bifunctional structured surface that were made from the same polymer -- an antimicrobial polycation (a synthetic mimic of an antimicrobial peptide, SMAMP) and a protein-repellent polyzwitterion (poly(sulfobetaines), PSB). The first type of bifunctional surface was fabricated by a colloidal lithography (CL) based process where the two polymers were immobilized sequentially onto pre-structured surfaces with a chemical contrast (gold on silicon). This enabled site-selective covalent attachment. The CL materials had a spacing ranging from 200 nm to 2 µm. The second type of structured surface (spacing: 1 - 8.5 µm) was fabricated using a microcontact printing (µCP) process where SMAMP patches were printed onto a PSB network, so that 3D surface features were obtained. The thus obtained materials were studied by quantitative nanomechanical measurements using atomic force microscopy (QNM-AFM). The different architectures led to different local elastic moduli at the polymer-air interface, where the CL surfaces were much stiffer (Derjaguin-Muller-Toporov (DMT) modulus = 20 ± 0.8 GPa) compared to the structured 3D networks obtained by µCP (DMT modulus = 42 ± 1.1 MPa). The effects of the surface topology and stiffness on the antimicrobial activity against Escherichia coli, the protein repellency (using fibrinogen), and the compatibility with human gingival mucosal keratinocytes were investigated. The softer 3D µCP surfaces had simultaneous antimicrobial activity, protein repellency, and cell compatibility at all spacings. For the stiffer CL surfaces, quantitative simultaneous antimicrobial activity and protein repellency was not obtained. However, the cell compatibility could be maintained at all spacings. The optimum spacing for the CL materials was in the range of 500 nm-1 µm, with significantly reduced antimicrobial activity at 2 µm spacing. Thus, the soft polymer network obtained by µCP could be more easily optimized than the stiff CL surface, and had a broader topology range of optimal or near-optimal bioactivity.

Picosecond Laser-Textured Stainless Steel Superhydrophobic Surface with an Antibacterial Adhesion Property

The pursuit of antibacterial properties on the surfaces of food container, medical equipment, and pharmaceutical tanks has been a compelling challenge for decades. Inspired by the biomimetic superhydrophobic surfaces that have self-cleaning, antifog, antisnow, and reduced bacterial adhesion properties, we use a simple and effective technology of a picosecond laser texturing for the fabrication of a superhydrophobic antibacterial surface on AISI 420 martensitic stainless steel plates. The laser-textured surface with micropapillae patterns with superimposed nanostructures exhibits outstanding in-air superhydrophobic and superaerophilicity underwater, which under the oscillation state resists an adhesion of 99% Escherichia coli and 93% Staphylococcus aureus and has hardly any bacterial adhesion under a stationary state. The comparative experiments verify that the robust air layer and hierarchical micro-nanostructures have come together to comprise the antibacterial mechanism. The laser-textured superhydrophobic surface also exhibits superior anticorrosion and antidestructive abilities with excellent antibacterial durability especially if deep cleaning is carried out after each dipping time in the bacterial suspension, promoting its leading-edge applications in medical, food, and pharmaceutical fields.

Fused Deposition Modelling as a Potential Tool for Antimicrobial Dialysis Catheters Manufacturing: New Trends vs. Conventional Approaches

The rising rate of individuals with chronic kidney disease (CKD) and ineffective treatment methods for catheter-associated infections in dialysis patients has led to the need for a novel approach to the manufacturing of catheters. The current process requires moulding, which is time consuming, and coated catheters used currently increase the risk of bacterial resistance, toxicity, and added expense. Three-dimensional (3D) printing has gained a lot of attention in recent years and offers the opportunity to rapidly manufacture catheters, matched to patients through imaging and at a lower cost. Fused deposition modelling (FDM) in particular allows thermoplastic polymers to be printed into the desired devices from a model made using computer aided design (CAD). Limitations to FDM include the small range of thermoplastic polymers that are compatible with this form of printing and the high degradation temperature required for drugs to be extruded with the polymer. Hot-melt extrusion (HME) allows the potential for antimicrobial drugs to be added to the polymer to create catheters with antimicrobial activity, therefore being able to overcome the issue of increased rates of infection. This review will cover the area of dialysis and catheter-related infections, current manufacturing processes of catheters and methods to prevent infection, limitations of current processes of catheter manufacture, future directions into the manufacture of catheters, and how drugs can be incorporated into the polymers to help prevent infection.

Surface Structuring Combined with Chemical Surface Functionalization: An Effective Tool to Manipulate Cell Adhesion

In this study, we investigate how a surface structure underneath a surface-attached polymer coating affects the bioactivity of the resulting material. To that end, structured surfaces were fabricated using colloidal lithography (lateral dimensions: 200 nm to 1 µm, height ~15 to 50 nm). The surface structures were further functionalized either with antimicrobial, cell-adhesive polycations or with protein-repellent polyzwitterions. The materials thus obtained were compared to non-functionalized structured surfaces and unstructured polymer monolayers. Their physical properties were studied by contact-angle measurements and atomic force microscopy (AFM). Protein adhesion was studied by surface plasmon resonance spectroscopy, and the antimicrobial activity against Escherichia coli bacteria was tested. The growth of human mucosal gingiva keratinocytes on the materials was analyzed using the Alamar blue assay, optical microscopy, and live-dead staining. The data shows that the underlying surface structure itself reduced protein adhesion and also bacterial adhesion, as evidenced by increased antimicrobial activity. It also enhanced cell adhesion to the surfaces. Particularly in combination with the adhesive polycations, the surfaces increased the cell growth compared to the unstructured reference materials. Thus, functionalizing structured surfaces with adhesive polymer could be a valuable tool for improved tissue integration.

Three-Dimensional, Bifunctional Microstructured Polymer Hydrogels Made from Polyzwitterions and Antimicrobial Polymers

Biofilm-associated infections of medical devices are a global problem. For the prevention of such infections, biomaterial surfaces are chemically or topographically modified to slow down the initial stages of biofilm formation. In the bifunctional material here presented, chemical and topographical cues are combined, so that protein and bacterial adhesion as well as bacterial proliferation are effectively inhibited. Upon changes in the surface topography parameters and investigation of the effect of these changes on bioactivity, structure-property relationships are obtained. The target material is obtained by microcontact printing (μCP), a soft lithography method. The antimicrobial component, poly(oxanorbornene)-based synthetic mimics of an antimicrobial peptide (SMAMP), was printed onto a protein-repellent polysulfobetaine hydrogel, so that bifunctional 3D structured polymer surfaces with 1, 2, and 8.5 μm spacing are obtained. These surfaces are characterized with fluorescence microscopy, surface plasmon resonance spectroscopy, atomic force microscopy, and contact angle measurements. Biological studies show that the bifunctional surfaces with 1 and 2 μm spacing are 100% antimicrobially active against Escherichia coli and Staphylococcus aureus, 100% fibrinogen-repellent, and nontoxic to human gingival mucosal keratinocytes. At 8.5 μm spacing, the broad-band antimicrobial activity and the protein repellency are compromised, which indicates that this spacing is above the upper limit for effective simultaneous antimicrobial activity and protein repellency of polyzwitterionic-polycationic materials.

Understanding Biofilms and Novel Approaches to the Diagnosis, Prevention, and Treatment of Medical Device-Associated Infections

Treatment of medical device-related infections is challenging and recurrence is common. The main reason for this is that microorganisms adhere to the surfaces of medical devices and enter into a biofilm state in which they display distinct growth rates, structural features, and protection from antimicrobial agents and host immune mechanisms compared with their planktonic counterparts. This article reviews how microorganisms form biofilms and the mechanisms of protection against antimicrobial agents and the host immune system provided by biofilms. Also discussed are innovative strategies for the diagnosis of biofilm-associated infection and novel approaches to treatment and prevention of medical device-associated infections.

Antimicrobial Porous Surfaces Prepared by Breath Figures Approach

Herein, efficient antimicrobial porous surfaces were prepared by breath figures approach from polymer solutions containing low content of block copolymers with high positive charge density. In brief, those block copolymers, which were used as additives, are composed of a polystyrene segment and a large antimicrobial block bearing flexible side chain with 1,3-thiazolium and 1,2,3-triazolium groups, PS54-b-PTTBM-M44, PS54-b-PTTBM-B44, having different alkyl groups, methyl or butyl, respectively. The antimicrobial block copolymers were blended with commercial polystyrene in very low proportions, from 3 to 9 wt %, and solubilized in THF. From these solutions, ordered porous films functionalized with antimicrobial cationic copolymers were fabricated, and the influence of alkylating agent and the amount of copolymer in the blend was investigated. Narrow pore size distribution was obtained for all the samples with pore diameters between 5 and 11 µm. The size of the pore decreased as the hydrophilicity of the system increased; thus, either as the content of copolymer was augmented in the blend or as the copolymers were quaternized with methyl iodide. The resulting porous polystyrene surfaces functionalized with low content of antimicrobial copolymers exhibited remarkable antibacterial efficiencies against Gram positive bacteria Staphylococcus aureus, and Candida parapsilosis fungi as microbial models.

Intrarenal Toll-like receptor 4 and Toll-like receptor 2 expression correlates with injury in antineutrophil cytoplasmic antibody-associated vasculitis

In antineutrophil cytoplasmic antibody-associated vasculitis (AAV), Toll-like receptors (TLRs) may be engaged by infection-associated patterns and by endogenous danger signals, linking infection and innate inflammation with this autoimmune disease. This study examined intrarenal TLR2, TLR4, and TLR9 expression and renal injury in AAV, testing the hypothesis that increased TLR expression correlates with renal injury. Patients with AAV exhibited both glomerular and tubulointerstitial expression of TLR2, TLR4, and TLR9, with TLR4 being the most prominent in both compartments. Glomerular TLR4 expression correlated with glomerular segmental necrosis and cellular crescents, with TLR2 expression correlating with glomerular segmental necrosis. The extent and intensity of glomerular and tubulointerstitial TLR4 expression and the intensity of glomerular TLR2 expression inversely correlated with the presenting estimated glomerular filtration rate. Although myeloid cells within the kidney expressed TLR2, TLR4, and TLR9, TLR2 and TLR4 colocalized with endothelial cells and podocytes, whereas TLR9 was expressed predominantly by podocytes. The functional relevance of intrarenal TLR expression was further supported by the colocalization of TLRs with their endogenous ligands high-mobility group box 1 and fibrinogen. Therefore, in AAV, the extent of intrarenal TLR4 and TLR2 expression and their correlation with renal injury indicates that TLR4, and to a lesser degree TLR2, may be potential therapeutic targets in this disease.

Emerging medical and engineering strategies for the prevention of long-term indwelling catheter blockage

Urinary catheters have been used on an intermittent or indwelling basis for centuries, in order to relieve urinary retention and incontinence. Nevertheless, the use of urinary catheters in the clinical setting is fraught with complication, the most common of which is the development of nosocomial urinary tract infections, known as catheter-associated urinary tract infections. Infections of this nature are not only significant owing to their high incidence rate and subsequent economic burden but also to the severe medical consecutions that result. A range of techniques have been employed in recent years, utilising various technologies in attempts to counteract the perilous medical cascade following catheter blockage. This review will focus on the current advancement (within the last 10 years) in prevention of encrustation and blockage of long-term indwelling catheters both from engineering and medical perspectives, with particular emphasis on the importance of stimuli-responsive systems.

Design of a Multifunctional Nanoengineered PLLA Surface by Maximizing the Synergies between Biochemical and Surface Design Bactericidal Effects

Nanotechnology, the manipulation of matter on atomic, molecular, and supramolecular scales, has become the most appealing strategy for biomedical applications and is of great interest as an approach to preventing microbial risks. In this study, we utilize the antimicrobial performance and the drug-loading ability of novel nanoparticles based on silicon oxide and strontium-substituted hydroxyapatite to develop nanocomposite antimicrobial films based on a poly(l-lactic acid) (PLLA) polymer. We also demonstrate that nanoimprint lithography (NIL), a process adaptable to industrial application, is a feasible fabrication technique to modify the surface of PLLA, to alter its physical properties, and to utilize it for antibacterial applications. Various nanocomposite PLLA films with nanosized (black silicon) and three-dimensional (hierarchical) hybrid domains were fabricated by thermal NIL, and their bactericidal activity against Escherichia coli and Staphylococcus aureus was assessed. Our findings demonstrate that besides hydrophobicity the nanoparticle antibiotic delivery and the surface roughness are essential factors that affect the biofilm formation.

Multi-scale surface topography to minimize adherence and viability of nosocomial drug-resistant bacteria

Toward minimizing bacterial colonization of surfaces, we present a one-step etching technique that renders aluminum alloys with micro- and nano-scale roughness. Such a multi-scale surface topography exhibited enhanced antibacterial effect against a wide range of pathogens. Multi-scale topography of commercially grade pure aluminum killed 97% of Escherichia coli and 28% of Staphylococcus aureus cells in comparison to 7% and 3%, respectively, on the smooth surfaces. Multi-scale topography on Al 5052 surface was shown to kill 94% of adhered E. coli cells. The microscale features on the etched Al 1200 alloy were not found to be significantly bactericidal, but shown to decrease the adherence of S. aureus cells by one-third. The fabrication method is easily scalable for industrial applications. Analysis of roughness parameters determined by atomic force microscopy revealed a set of significant parameters that can yield a highly bactericidal surface; thereby providing the design to make any surface bactericidal irrespective of the method of fabrication. The multi-scale roughness of Al 5052 alloy was also highly bactericidal to nosocomial isolates of E. coli, K. pneumoniae and P. aeruginosa. We envisage the potential application of engineered surfaces with multi-scale topography to minimize the spread of nosocomial infections.

Targeting microbial biofilms: current and prospective therapeutic strategies

Biofilm formation is a key virulence factor for a wide range of microorganisms that cause chronic infections. The multifactorial nature of biofilm development and drug tolerance imposes great challenges for the use of conventional antimicrobials and indicates the need for multi-targeted or combinatorial therapies. In this Review, we focus on current therapeutic strategies and those under development that target vital structural and functional traits of microbial biofilms and drug tolerance mechanisms, including the extracellular matrix and dormant cells. We emphasize strategies that are supported by in vivo or ex vivo studies, highlight emerging biofilm-targeting technologies and provide a rationale for multi-targeted therapies aimed at disrupting the complex biofilm microenvironment.

Neointimal fibrotic lead encapsulation - Clinical challenges and demands for implantable cardiac electronic devices

Every tenth patient with a cardiac pacemaker or implantable cardioverter-defibrillator implanted is expected to have at least one lead problem in his lifetime. However, transvenous leads are often difficult to remove due to thrombotic obstruction or extensive neointimal fibrotic ingrowth. Despite its clinical significance, knowledge on lead-induced vascular fibrosis and neointimal lead encapsulation is sparse. Although leadless pacemakers are already available, their clinical operating range is limited. Therefore, lead/tissue interactions must be further improved in order to improve lead removals in particular. The published data on the coherences and issues related to lead associated vascular fibrosis and neointimal lead encapsulation are reviewed and discussed in this paper.

Surface micropattern reduces colonization and medical device-associated infections

PURPOSE

Surface microtopography offers a promising approach for infection control. The goal of this study was to provide evidence that micropatterned surfaces significantly reduce the potential risk of medical device-associated infections.

METHODOLOGY

Micropatterned and smooth surfaces were challenged in vitro against the colonization and transference of two representative bacterial pathogens - Staphylococcus aureus and Pseudomonas aeruginosa. A percutaneous rat model was used to assess the effectiveness of the micropattern against device-associated S. aureus infections. After the percutaneous insertion of silicone rods into (healthy or immunocompromised) rats, their backs were inoculated with S. aureus. The bacterial burdens were determined in tissues under the rods and in the spleens.

RESULTS

The micropatterns reduced adherence by S. aureus (92.3 and 90.5 % reduction for flat and cylindrical surfaces, respectively), while P. aeruginosa colonization was limited by 99.9 % (flat) and 95.5 % (cylindrical). The micropatterned surfaces restricted transference by 95.1 % for S. aureus and 94.9 % for P. aeruginosa, compared to smooth surfaces. Rats with micropatterned devices had substantially fewer S. aureus in subcutaneous tissues (91 %) and spleens (88 %) compared to those with smooth ones. In a follow-up study, immunocompromised rats with micropatterned devices had significantly lower bacterial burdens on devices (99.5 and 99.9 % reduction on external and internal segments, respectively), as well as in subcutaneous tissues (97.8 %) and spleens (90.7 %) compared to those with smooth devices.

CONCLUSION

Micropatterned surfaces exhibited significantly reduced colonization and transference in vitro, as well as lower bacterial burdens in animal models. These results indicate that introducing this micropattern onto surfaces has high potential to reduce medical device-associated infections.

Protein Resistant Polymeric Biomaterials

Toward improving implantable medical devices as well as diagnostic performance, the development of polymeric biomaterials having resistance to proteins remains a priority. Herein, we highlight key strategies reported in the recent literature that have relied upon improvement of surface hydrophilicity via direct surface modification methods or with bulk modification using surface modifying additives (SMAs). These approaches have utilized a variety of techniques to incorporate the surface hydrophilization agent, including physisorption, hydrogel network formation, surface grafting, layer-by-layer (LbL) assembly and blending base polymers with SMAs. While poly(ethylene glycol) (PEG) remains the gold standard, new alternatives have emerged such as polyglycidols, poly(2-oxazoline)s (POx), polyzwitterions, and amphiphilic block copolymers. While these new strategies provide encouraging results, the need for improved correlation between in vitro and in vivo protein resistance is critical. This may be achieved by employing complex protein solutions as well as strides to enhance the sensitivity of protein adsorption measurements.

Arginine-Based Polymer Brush Coatings with Hydrolysis-Triggered Switchable Functionalities from Antimicrobial (Cationic) to Antifouling (Zwitterionic)

Arginine polymer based coatings with switchable properties were developed on glass slides (GS) to demonstrate the smart transition from antimicrobial (cationic) to fouling-resistant (zwitterionic) surfaces. l-Arginine methyl ester-methacryloylamide (Arg-Est) and l-arginine-methacryloylamide (Arg-Me) polymer brushes were grafted from the GS surface via surface-initiated reversible addition-fragmentation chain-transfer (SI-RAFT) polymerization. In comparison to the pristine GS and Arg-Me graft polymerized GS (GS-Arg-Me) surfaces, the Arg-Est polymer brushes-functionalized GS surfaces exhibit a superior antimicrobial activity. Upon hydrolysis treatment, the strong bactericidal efficacy switches to good resistance to adsorption of bovine serum albumin (BSA), the adhesion of Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli, as well as the attachment of Amphora coffeaeformis. In addition, the switchable coatings are proven to be biocompatible. The stability and durability of the switchable coatings are also ascertained after exposure to filtered seawater for 30 days. Therefore, deposition of the proposed "smart coatings" offers another environmentally friendly alternative for combating biofouling.