Nanostructured Cubosomes in a Thermoresponsive Depot System: An Alternative Approach for the Controlled Delivery of Docetaxel

Implementing losartan potassium-laden pegylated nanocubic vesicles as a novel nanoplatform to alleviate cisplatin-induced nephrotoxicity via blocking apoptosis and activating the wnt/β-catenin/TCF-4 pathway

AIMS

Losartan potassium-laden pegylated nanocubic vesicles (LP-NCVs-PEG) have an intriguing kidney-targeted nanoplatform for acute renal injury via blocking apoptosis and activating wnt/β-catenin pathway.

MAIN METHODS

Utilizing a thin-film hydration methodology established on 42 full factorial design to produce LP loaded nanocubic formulations (LP-NCVs) which composed mainly from L-α-phosphatidylcholine and poloxamer. The optimization process was designed to select the formulation with maximum entrapment efficiency (EE %), maximum in-vitro drug release (Q8h), and minimum vesicle size (VS). The optimum formulation was then pegylated to obtain LP-NCVs-PEG formulation that shields NCVs from the harsh ecosystem of the stomach, improves their oral drug delivery performance and targets the proximal renal tubules with no systemic toxicity. Male albino rats were injected with Cisplatin (6 mg/kg, i.p.) alone or with LP-formulations (5 mg/kg/day). Kidney injury markers, inflammatory markers, apoptotic markers. Besides renal tissue expression of Wnt, β-Catenin, GSK-3β, renal RNA gene expression of TCF-4, LEF-1 and histopathology were also analyzed to display pharmacological study.

KEY FINDINGS

The pharmacokinetics studies demonstrated that LP-NCVs-PEG boosted LP bioavailability approximately 3.61 times compared to LP oral solution. Besides LP-NCVs-PEG may have an intriguing kidney-targeted nanoplatform for acute renal injury via decreased renal toxicity markers, renal expression of LEF-1, GSK3-β, caspase, TNF-α, NF-κB and TUNEL expression. Alternatively, increased renal tissue level of Bcl-2, wnt, β-catenin and TCF-4.

SIGNIFICANCE

LP-NCVs-PEG improved LP pharmacokinetics targeting the kidney and improved injury by activating wnt/β-catenin/TCF-4 pathway, blocking apoptosis, inflammation and renal toxicity markers suggesting it might be successful nephroprotective adjuvant therapy.

Vesicular approach of cubosomes, its components, preparation techniques, evaluation and their appraisal for targeting cancer cells

Cancer has been characterized by abnormal and uncontrolled proliferation of cells. Majority of drugs given through chemotherapy produce unwanted and adverse effects of chemotherapeutic agents to the other healthy cells and tissues of body. Various nanocarriers have now been considered for treatment of cancer. Among various nanocarriers, cubosomes are the nano sized dispersions that have drawn interest of researchers recently. Cubosomes are defined as dispersions of colloidal nature containing cubic crystalline liquid formations in aqueous medium in presence of suitable surfactant molecules. The unique capacity to encapsulate lipophilic, hydrophilic, and amphiphilic compounds inside their structure distinguishes them among others. Top- down method and hydrotrope method are most often employed methods for cubosomes preparation. Cubosomes can be characterized by Polarized light microscopy Photon correlation spectroscopy X-ray scattering (SAXS), Transmission electron microscopy and various stability studies. Cubic lipid nanoparticles have a very stable cubic structure that enables slower dissociation rate, increased retention and site-specific delivery of drugs. Cubosomes containing extracts of cornelian cherry for boosting anti-cancerous effects in cancer of colorectal cells by preventing against GIT destruction. When applied for skin cancer, cubosomes have shown to be having enhanced permeation of the drug. In liver cancer, increased bioavailability of drug was observed via cubosomes. This current review elaborates the advancement of cubosomes and their effective role in the treatment of cancer. This review aims to describe vesicular approach of cubosomes, its composition and method of preparation, characterization tests as well as elaborates various applications of cubosomes in cancer.

Magnetic nanosystem a tool for targeted delivery and diagnostic application: Current challenges and recent advancement

Over the last two decades, researchers have paid more attention to magnetic nanosystems due to their wide application in diverse fields. The metal nanomaterials' antimicrobial and biocidal properties make them an essential nanosystem for biomedical applications. Moreover, the magnetic nanosystems could have also been used for diagnosis and treatment because of their magnetic, optical, and fluorescence properties. Superparamagnetic iron oxide nanoparticles (SPIONs) and quantum dots (QDs) are the most widely used magnetic nanosystems prepared by a simple process. By surface modification, researchers have recently been working on conjugating metals like silica, copper, and gold with magnetic nanosystems. This hybridization of the nanosystems modifies the structural characteristics of the nanomaterials and helps to improve their efficacy for targeted drug and gene delivery. The hybridization of metals with various nanomaterials like micelles, cubosomes, liposomes, and polymeric nanomaterials is gaining more interest due to their nanometer size range and nontoxic, biocompatible nature. Moreover, they have good injectability and higher targeting ability by accumulation at the target site by application of an external magnetic field. The present article discussed the magnetic nanosystem in more detail regarding their structure, properties, interaction with the biological system, and diagnostic applications.

Cubosomes: An Emerging and Promising Drug Delivery System for Enhancing Cancer Therapy

Cancer and other diseases can be treated with cubosomes, which are lyotropic nonlamellar liquid crystalline nanoparticles (LCNs). These cubosomes can potentially be a highly versatile carrier with theranostic efficacy, as they can be ingested, applied topically, or injected intravenously. Recent years have seen substantial progress in the synthesis, characterization, regulation of drug release patterns, and target selectivity of loaded anticancer bioactive compounds. However, its use in clinical settings has been slow and necessitates additional proof. Recent progress and roadblocks in using cubosomes as a nanotechnological intervention against various cancers are highlighted. In the last few decades, advances in biomedical nanotechnology have allowed for the development of "smart" drug delivery devices that can adapt to external stimuli. By improving therapeutic targeting efficacy and lowering the negative effects of payloads, these well-defined nanoplatforms can potentially promote patient compliance in response to specific stimuli. Liposomes and niosomes, two other well-known vesicular systems, share a lipid basis with cubosomes. Possible applications include a novel medication delivery system for hydrophilic, lipophilic, and amphiphilic drugs. We evaluate the literature on cubosomes, emphasizing their potential use in tumor-targeted drug delivery applications and critiquing existing explanations for cubosome self-assembly, composition, and production. As cubosome dispersion has bioadhesive and compatible features, numerous drug delivery applications, including oral, ocular, and transdermal, are also discussed in this review.

A Synoptic Update on Smart Lipid Nanocarrier: Cubosomes, and their Design Development, and Recent Challenges

Cubosomes are a kind of nanoparticle that is distinct from solid particles in that they are liquid crystalline particles formed by self-assembly of a certain surfactant with a current water ratio. Their unique properties as a result of their microstructure are useful in practical applications. Cubosomes, specifically lyotropic nonlamellar liquid crystalline nanoparticles (LCNs) have gained acceptance as a medication delivery strategy for cancer and other disorders. Cubosomes are produced by the fragmentation of a solid-like phase into smaller particles. Because of its particular microstructure, which is physiologically safe and capable of allowing for the controlled release of solubilized compounds, cubic phase particles are garnering considerable attention. These cubosomes are highly adaptable carriers with promising theranostic efficacy because they can be given orally, topically, or intravenously. Throughout its operation, the drug delivery system regulates the loaded anticancer bioactive's target selectivity and drug release characteristics. This compilation examines recent advances and obstacles in the development and application of cubosomes to treat various cancers, as well as the challenges of turning it into a potential nanotechnological invasion.

Optimization of hyaluronan-enriched cubosomes for bromfenac delivery enhancing corneal permeation: characterization, ex vivo, and in vivo evaluation

To design and evaluate hyaluronan-based cubosomes loaded with bromfenac sodium (BS) for ocular application to enhance the corneal permeation and retention in pterygium and cataract treatment. BS-loaded cubosomes were prepared by the emulsification method, employing 2³ full factorial design using Design-Expert® software. Glycerol monoolein (GMO) and poloxamer 407 (P407) as lipid phase and polyvinyl alcohol (PVA) as stabilizer were the used ingredients. The optimized formulation (OBC; containing GMO (7% w/w), P407 (0.7% w/w) and PVA (2.5% w/w)) was further evaluated. OBC had an entrapment efficiency of 61.66 ± 1.01%, a zeta potential of -30.80 ± 0.61 mV, a mean particle size of 149.30 ± 15.24 nm and a polydispersity index of 0.21 ± 0.02. Transmission electron microscopy confirmed its cubic shape and excellent dispersibility. OBC exhibited high stability and no ocular irritation that was ensured by histopathology. Ex vivo permeation study showed a significant increase in drug deposition and permeability parameters through goat cornea, besides, confocal laser microscopy established the superior permeation capability of OBC, as compared to drug solution. In vivo pharmacokinetics in aqueous humor indicated higher AUC_0-tlast (18.88 µg.h/mL) and mean residence time (3.16 h) of OBC when compared to the marketed eye drops (7.93 µg.h/mL and 1.97 h, respectively). Accordingly, hyaluronan-enriched cubosomes can be regarded as a promising carrier for safe and effective topical ocular delivery.

PNIPAM-stabilized cubosomes as fusogenic delivery nanovectors for anticancer applications

In recent years, lipid cubic nanoparticles have emerged as promising nanocarriers for drug delivery, due to the several advantages they exhibit with respect to other lipid systems. Here, we report on lipid cubic nanoparticles stabilized by PNIPAM-based amphiphilic block copolymers, specifically, poly(N, N-dimethylacrylamide)-block-poly(N-isopropylacrylamide) (PDMA-b-PNIPAM), as a new class of drug delivery systems (DDS). In vitro studies on the internalization efficiency of the DDS towards two types of human cancer cells (colon HCT-116 and bladder T24 cells), carried out employing a set of sensitive techniques (confocal laser scanning microscopy (CLSM), flow cytometry, scanning electron microscopy (SEM), fluorescence spectroscopy), highlight a prominent role of PDMA-b-PNIPAM stabilizer in enhancing the uptake of cubosomes, compared to the standard Pluronic F127-based formulations. The drug delivery potential of cubosomes, tested by encapsulating a chemotherapeutic drug, camptothecin (CPT), and conducting cytotoxicity studies against 2D plated cells and 3D spheroids, confirm that PDMA-b-PNIPAM-stabilized cubosomes improve the efficacy of treatment with CPT. The origin of this effect lies in the higher lipophilicity of the stabilizer, as we confirm by studying the interaction between the cubosomes and biomimetic membranes of lipid vesicles with Small Angle X-Ray Scattering (SAXS) and CLSM experiments. These results corroborate our fundamental understanding of the interaction between cubosomes and cells, and on the role of polymer to formulate lipid cubic nanoparticles as DDS.

Lyotropic liquid crystalline 2D and 3D mesophases: Advanced materials for multifunctional anticancer nanosystems

Cancer remains a leading cause of mortality. Despite significant breakthroughs in conventional therapies, treatment is still far from ideal due to high toxicity in normal tissues and therapeutic inefficiency caused by short drug lifetime in the body and resistance mechanisms. Current research moves towards the development of multifunctional nanosystems for delivery of chemotherapeutic drugs, bioactives and/or radionuclides that can be combined with other therapeutic modalities, like gene therapy, or imaging to use in therapeutic screening and diagnosis. The preparation and characterization of Lyotropic Liquid Crystalline (LLC) mesophases self-assembled as 2D and 3D structures are addressed, with an emphasis on the unique properties of these nanoassemblies. A comprehensive review of LLC nanoassemblies is also presented, highlighting the most recent advances and their outstanding advantages as drug delivery systems, including tailoring strategies that can be used to overcome cancer challenges. Therapeutic agents loaded in LLC nanoassemblies offer qualitative and quantitative enhancements that are superior to conventional chemotherapy, particularly in terms of preferential accumulation at tumor sites and promoting enhanced cancer cell uptake, lowering tumor volume and weight, improving survival rates, and increasing the cytotoxicity of their loaded therapeutic agents. In terms of quantitative anticancer efficacy, loaded LLC nanoassemblies reduced the IC50 values from 1.4-fold against lung cancer cells to 125-fold against ovarian cancer cells.

Polymeric in situ forming depots for long-acting drug delivery systems

Polymeric in situ forming depots have emerged as highly promising drug delivery systems for long-acting applications. Their effectiveness is attributed to essential characteristics such as biocompatibility, biodegradability, and the ability to form a stable gel or solid upon injection. Moreover, they provide added versatility by complementing existing polymeric drug delivery systems like micro- and nanoparticles. The formulation's low viscosity facilitates manufacturing unit operations and enhances delivery efficiency, as it can be easily administered via hypodermic needles. The release mechanism of drugs from these systems can be predetermined using various functional polymers. To enable unique depot design, numerous strategies involving physiological and chemical stimuli have been explored. Important assessment criteria for in situ forming depots include biocompatibility, gel strength and syringeability, texture, biodegradation, release profile, and sterility. This review focuses on the fabrication approaches, key evaluation parameters, and pharmaceutical applications of in situ forming depots, considering perspectives from academia and industry. Additionally, insights about the future prospects of this technology are discussed.

Comparative assessment of solubility enhancement of itroconazole by solid dispersion and co-crystallization technique: Investigation of simultaneous effect of media composition on drug dissolution

Solubility of the drug is an important property of the drug as it affects the release, absorption, dissolution rate and ultimately bioavailability of the drug. Hence, the poorly aqueous soluble drug, need to be processed, to enhance its solubility and dissolution. The Biopharmaceutical System of Classification (BCS) II drugs are poorly soluble and have high permeability. Though their good ability to permeate through the membrane make them clinically useful but the problem associated with the solubility restrict their clinical use. Therefore, there is need to improve the solubility of such drug molecules to get effective pharmacological action. Itraconazole (ITZ) is an antifungal agent used in the treatment of fungal infections having poor aqueous solubility as belonging to BCS class II. The present study was aim to enhance the solubility of ITZ by solid dispersion and co-crystallization techniques. Investigation of simultaneous effect of media composition on drug dissolution was also the objective of this work. The ITZ-SD and ITZ-CCs were prepared from ITZ and other excipients like PEG 4000, oxalic acid, fumaric and malic acid by solvent evaporation, kneading technique, slurry conversion and solvent drop grinding methods. The prepared ITZ-SD, ITZ-OA-CCs, ITZ-FA-CCs and ITZ-MA-CCs were evaluated for FTIR, DSC, PXRD, % yield, micromeritic properties. The optimized ITZ-SD and ITZ-CCs were used to compress a tablet and subject to post-compression parameters. The results of FTIR and DSC showed the absence of interaction between the drug and excipients. The PXRD pattern demonstrated the formation of crystalline structures with 6 folds increased in solubility during saturation solubility analysis. In vitro dissolution was carried out in dissolution media with different pH which shows the maximum release from ITZ-SD and ITZ-CCs in pH 6.8. This also revealed the highly pH dependent solubility and dissolution behavior of the weakly basic BCS class II drug (ITZ) with pKa value of 3.7. The overall results in this study indicated the potential of solid dispersion and co-crystals for enhancement of solubility of the poorly water-soluble drugs.

Development and Characterization of Pentaerythritol-EudragitRS100 Co-processed Excipients as Solid Dispersion Carriers for Enhanced Aqueous Solubility, In Vitro Dissolution, and Ex Vivo Permeation of Atorvastatin

Atorvastatin (ATV), a lipid-lowering agent, has low oral bioavailability due to its poor water solubility, permeability, and low dissolution rate. Therefore, pentaerythritol-EudragitRS100 co-processed excipients (PECE) were synthesized, and their feasibility as solid dispersion carriers (ATV-PECE-SD) for improving the solubility, permeability, and dissolution rate of ATV was explored. Solid dispersions were assessed in terms of particle size and zeta potential, and solubility, in vitro dissolution, and ex vivo permeation studies were studied. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) were used as characterization tools. ATV-PECE-SD3 (1:4) formulations exhibited a small particle size with high stability. Physicochemical evaluation evidenced the formation of solid dispersion due to the involvement of weak electrostatic interaction between the polar functional groups of ATV and PECE carriers. ATV-PECE-SD3 (1:4) significantly enhanced the water solubility by ∼43-fold compared to pure ATV. In vitro dissolution studies showed that optimized formulation enhanced the dissolution rate of ATV compared to pure ATV. Ex vivo permeation results revealed that ATV-PECE-SD3 (1:4) enhanced the permeation rate of ATV compared to pure ATV. The optimized formulations significantly improved the dissolution rate of ATV in the fed state due to the food effect and micelle formation mechanism compared to the fasted state. The study concludes that co-processed excipients could be used as promising solid dispersion carriers to enhance the aqueous solubility, permeability, and dissolution rate of ATV.

Pectin Nanoparticle-Loaded Soft Coral Nephthea sp. Extract as In Situ Gel Enhances Chronic Wound Healing: In Vitro, In Vivo, and In Silico Studies

This study shed light for the first time on the in vivo diabetic wound healing potential activity of natural marine soft coral polymeric nanoparticle in situ gel using an excision wound model. A Nephthea sp. methanol-methylene chloride extract loaded with pectin nanoparticles (LPNs) was created. For the preparation of in situ gel, ion-gelation techniques, the entrapment efficiency, the particle size, the polydispersity index, the zeta potential, the in-vitro drug release, and a transmission electron microscope were used and the best formula was selected. Using (UPLC-Q/TOF-MS), 27 secondary metabolites responsible for extract biological activity were identified. Isolation and identification of arachidic acid, oleic acid, nervonic acid, and bis-(2-ethylhexyl)-phthalate (DEHP) of Nephthea sp. was firstly reported here using NMR and mass spectral analyses. Moreover, LPN in situ gel has the best effects on regulating the proinflammatory cytokines (NF-κB, TNF-α, IL-6, and IL-1β) that were detected on days 7 and 15. The results were confirmed with an in vitro enzymatic inhibitory effect of the extract against glycogen synthase kinase (GSK-3) and matrix metalloproteinase-1 (MMP-1), with IC₅₀ values of 0.178 ± 0.009 and 0.258 ± 0.011 µg/mL, respectively. The molecular docking study showed a free binding energy of -9.6 kcal/mol for chabrolosteroid E, with the highest binding affinity for the enzyme (GSK-3), while isogosterone B had -7.8 kcal/mol for the enzyme (MMP-1). A pharmacokinetics study for chabrolohydroxybenzoquinone F and isogosterone B was performed, and it predicted the mode of action of wound healing activity.

Levofloxacin HCl-Incorporated Zein-Based Solvent Removal Phase Inversion In Situ Forming Gel for Periodontitis Treatment

Zein is composed of nonpolar amino acids and is a water-insoluble protein used as the matrix-forming agent of localized in situ forming gel (ISG). Therefore, this study prepared solvent removal phase inversion zein-based ISG formulations to load levofloxacin HCl (Lv) for periodontitis treatment using dimethyl sulfoxide (DMSO) and glycerol formal (GF) as the solvents. Their physicochemical properties were determined, including viscosity, injectability, gel formation, and drug release. The topography of dried remnants after drug release was revealed using a scanning electron microscope and X-ray computed microtomography (μCT) to investigate their 3D structure and % porosity. The antimicrobial activities were tested against Staphylococcus aureus (ATCC 6538), Escherichia coli ATCC 8739, Candida albicans ATCC 10231, and Porphyromonas gingivalis ATCC 33277 with agar cup diffusion. Increasing zein concentration or using GF as the solvent notably enhanced the apparent viscosity and injection force of the zein ISG. However, its gel formation slowed due to the dense zein matrix barrier's solvent exchange: the higher loaded zein or utilization of GF as an ISG solvent prolonged Lv release. The SEM and μCT images revealed the scaffold of dried ISG in that their % porosity corresponded with their phase transformation and drug release behavior. In addition, the sustainability of drug diffusion promoted a smaller antimicrobial inhibition clear zone. Drug release from all formulations was attained with minimum inhibitory concentrations against pathogen microbes and exhibited a controlled release over 7 days. Lv-loaded 20% zein ISG using GF as a solvent exhibited appropriate viscosity, Newtonian flow, acceptable gel formation and injectability, and prolonged Lv release over 7 days with efficient antimicrobial activities against various test microbes; thus, it is the potential ISG formulation for periodontitis treatment. Consequently, the Lv-loaded solvent removal zein-based ISGs proposed in this investigation offer promising potential as an efficacious drug delivery system for periodontitis treatment by local injection.

pH-Responsive Hybrid Nanoassemblies for Cancer Treatment: Formulation Development, Optimization, and In Vitro Therapeutic Performance

Current needs for increased drug delivery carrier efficacy and specificity in cancer necessitate the adoption of intelligent materials that respond to environmental stimuli. Therefore, we developed and optimized pH-triggered drug delivery nanoassemblies that exhibit an increased release of doxorubicin (DOX) in acidic conditions typical of cancer tissues and endosomal vesicles (pH 5.5) while exhibiting significantly lower release under normal physiological conditions (pH 7.5), indicating the potential to reduce cytotoxicity in healthy cells. The hybrid (polymeric/lipid) composition of the lyotropic non-lamellar liquid crystalline (LNLCs) nanoassemblies demonstrated high encapsulation efficiency of the drug (>90%) and high drug loading content (>7%) with colloidal stability lasting at least 4 weeks. Confocal microscopy revealed cancer cellular uptake and DOX-loaded LNLCs accumulation near the nucleus of human hepatocellular carcinoma cells, with a large number of cells appearing to be in apoptosis. DOX-loaded LNLCs have also shown higher citotoxicity in cancer cell lines (MDA-MB 231 and HepG2 cell lines after 24 h and in NCI-H1299 cell line after 48 h) when compared to free drug. After 24 h, free DOX was found to have higher cytotoxicity than DOX-loaded LNLCs and empty LNLCs in the normal cell line. Overall, the results demonstrate that DOX-loaded LNLCs have the potential to be explored in cancer therapy.

QbD-based optimization of raloxifene-loaded cubosomal formulation for transdemal delivery: ex vivo permeability and in vivo pharmacokinetic studies

Raloxifene (RLX) is a drug that is commonly recommended to postmenopausal women at high risk of invasive breast cancer and to prevent osteoporosis. However, limited water solubility (0.000512 mg/ml) and low oral bioavailability (2%) of RLX limit its therapeutic utility. The objective of the present study was to develop an alternative transdermal delivery of RLX to improve its absorption, bypass first pass metabolism, and subsequently improve bioavailability. RLX-loaded cubosomes were prepared using the ethanol injection method followed by microfluidization technique and optimized using the QbD-based 2³ factorial design. The average particle size, entrapment efficiency, and zeta potential of the optimized formulation were found to be 110.6 nm, 98.23%, and 26.2 mV, respectively. In vitro dissolution study indicated that the RLX-loaded cubosomes released 98.26% of the drug compared to pure RLX dispersion (58.6%). Histopathological examination revealed no sign of inflammation, indicating the safety of the developed formulation. Accelerated stability study as per ICH guidelines displayed no significant change in the formulation characteristics and drug-related performance of the developed formulation. Ex vivo permeability studies demonstrated a prolonged release from cubosomal formulation. In vivo pharmacokinetic studies revealed that the relative bioavailability of the optimized transdermal RLX-loaded cubosomes increased by 2.33-fold and 1.22-fold when compared with the oral RLX dispersion and transdermal RLX hydro-ethanolic solution respectively. IVIVC showed level C correlation with linear regression. Thus, the developed RLX-loaded cubosomes may have potential to overcome the problems associated with the existing marketed oral dosage forms of RLX.

Cubosomes: Design, Development, and Tumor-Targeted Drug Delivery Applications

Because of the extraordinary advancements in biomedical nanotechnology over the last few decades, traditional drug delivery systems have been transformed into smart drug delivery systems that respond to stimuli. These well-defined nanoplatforms can boost therapeutic targeting efficacy while reducing the side effects/toxicities of payloads, which are crucial variables for enhancing patient compliance by responding to specific internal or external triggers. Cubosomes are lipid-based nano systems that are analogous to well-known vesicular systems, such as lipo- and niosomes. They could be used as part of a unique drug delivery system that includes hydro-, lipo-, and amphiphilic drug molecules. In this review, we critically analyze the relevant literature on cubosomesregarding theories of cubosomeself-assembly, composition, and manufacturing methods, with an emphasis on tumor-targeted drug delivery applications. Due to the bioadhesive and -compatible nature of cubosome dispersion, this review also focuses on a variety of drug delivery applications, including oral, ophthalmic and transdermal.

Preparation of Terbinafin-Encapsulated Solid Lipid Nanoparticles Containing Antifungal Carbopol® Hydrogel with Improved Efficacy: In Vitro, Ex Vivo and In Vivo Study

The present research was aimed to develop a terbinafin hydrochloride (TH)-encapsulated solid lipid nanoparticles (SLNs) hydrogel for improved antifungal efficacy. TH-loaded SLNs were obtained from glyceryl monostearate (lipid) and Pluronic® F68 (surfactant) employing high-pressure homogenization. The ratio of drug with respect to lipid was optimized, considering factors such as desired particle size and highest percent encapsulation efficiency. Lyophilized SLNs were then incorporated in the hydrogel prepared from 0.2–1.0% w/v carbopol 934P and further evaluated for rheological parameters. The z-average, zeta potential and polydispersity index were found to be 241.3 nm, −15.2 mV and 0.415, respectively. The SLNs show a higher entrapment efficiency of about 98.36%, with 2.12 to 6.3602% drug loading. SEM images, XRD and the results of the DSC, FTIR show successful preparation of SLNs after freeze drying. The TH-loaded SLNs hydrogel showed sustained drug release (95.47 ± 1.45%) over a period of 24 h. The results reported in this study show a significant effect on the zone of inhibition than the marketed formulation and pure drug in Candida albicans cultures, with better physical stability at cooler temperatures. It helped to enhance skin deposition inthe ex vivostudy and improved, in vitro and in vivo, the antifungal activity.

Lyotropic Liquid Crystalline Nanostructures as Drug Delivery Systems and Vaccine Platforms

Lyotropic liquid crystals result from the self-assembly process of amphiphilic molecules, such as lipids, into water, being organized in different mesophases. The non-lamellar formed mesophases, such as bicontinuous cubic (cubosomes) and inverse hexagonal (hexosomes), attract great scientific interest in the field of pharmaceutical nanotechnology. In the present review, an overview of the engineering and characterization of non-lamellar lyotropic liquid crystalline nanosystems (LLCN) is provided, focusing on their advantages as drug delivery nanocarriers and innovative vaccine platforms. It is described that non-lamellar LLCN can be utilized as drug delivery nanosystems, as well as for protein, peptide, and nucleic acid delivery. They exhibit major advantages, including stimuli-responsive properties for the “on demand” drug release delivery and the ability for controlled release by manipulating their internal conformation properties and their administration by different routes. Moreover, non-lamellar LLCN exhibit unique adjuvant properties to activate the immune system, being ideal for the development of novel vaccines. This review outlines the recent advances in lipid-based liquid crystalline technology and highlights the unique features of such systems, with a hopeful scope to contribute to the rational design of future nanosystems.

Cubosomes and Hexosomes as Novel Nanocarriers for Bioactive Compounds

Cubosomes and hexosomes are nanostructured liquid crystalline particles, known as biocompatible nanocarriers for drug delivery. In recent years, there has been good interest in using cubosomes and hexosomes for the delivery of bioactive compounds in functional foods. These systems feature thermodynamic stability, encapsulate both hydrophobic and hydrophilic substances, and have a high tolerance to environmental stresses and potential for controlled release. This review outlines the recent advances in cubosomes and hexosomes in the food industry, focusing on their structure, composition, formation mechanisms, and factors influencing phase transformation between cubosomes and hexosomes. The potential applications especially for the bioactive delivery are presented. The integration of cubosomes and hexosomes with other emerging encapsulation technologies such as surface coating, gelation, and incorporation of polymers are also discussed.

Advances in the therapeutic delivery and applications of functionalized Pluronics: A critical review

Pluronic (PEO-PPO-PEO) block copolymers can form nano-sized micelles with a structure composed of a hydrophobic PPO core and hydrophilic PEO shell layer. Pluronics are U.S. Food and Drug Administration approved polymers, which are widely used for solubilization of drugs and their delivery, gene/therapeutic delivery, diagnostics, and tissue engineering applications due to their non-ionic properties, non-toxicity, micelle forming ability, excellent biocompatibility and biodegradability. Although Pluronics have been employed as drug carrier systems for several decades, numerous issues such as rapid dissolution, shorter residence time in biological media, fast clearance and weak mechanical strength have hindered their efficacy. Pluronics have been functionalized with pH-sensitive, biological-responsive moieties, antibodies, aptamers, folic acid, drugs, different nanoparticles, and photo/thermo-responsive hydrogels. These functionalization strategies enable Pluronics to act as stimuli responsive and targeted drug delivery vehicles. Moreover, Pluronics have emerged in nano-emulsion formulations and have been utilized to improve the properties of cubosomes, dendrimers and nano-sheets, including their biocompatibility and aqueous solubility. Functionalization of Pluronics results in the significant improvement of target specificity, loading capacity, biocompatibility of nanoparticles and stimuli responsive hydrogels for the promising delivery of a range of drugs. Therefore, this review presents an overview of all advancements (from the last 15 years) in functionalized Pluronics, providing a valuable tool for industry and academia in order to optimize their use in drug or therapeutic delivery, in addition to several other biomedical applications.

Cubosomes as an emerging platform for drug delivery: a state-of-the-art review

Lipid-based drug delivery nanoparticles, including non-lamellar type, mesophasic nanostructured materials of lyotropic liquid crystals (LLCs), have been a topic of interest for researchers for their applications in encapsulation of drugs...

Formation of Self-Assembled Liquid Crystalline Nanoparticles and Absorption Enhancement of Ω-3s by Phospholipids and Oleic Acids

This study aimed to optimize and evaluate self-assembled liquid crystalline nanoparticles (SALCs) prepared from phospholipids and oleic acid for enhancing the absorption of Ω-3s. We explored the structure and optimal formulation of SALCs, which are composed of Ω-3 ethyl ester (Ω-3 EE), phospholipids, and oleic acid, using a ternary diagram and evaluated the improvement in Ω-3 dissolution, permeation, and oral bioavailability. The in vitro dissolution and pharmacokinetics of Ω-3 SALCs were compared with those of Omacor soft capsules (as the reference). The shape of the liquid crystal was determined according to the composition of phospholipids, oleic acids, and Ω-3s and was found to be in cubic, lamellar, and hexagonal forms. The dissolution rates of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) obtained from Ω-3 SALCs were 1.7 to 2.3-fold higher than those of the Omacor soft capsules. Furthermore, a pharmacokinetic study in male beagle dogs revealed that Ω-3 SALCs increased the oral bioavailability of Ω-3 EE by 2.5-fold for EPA and 3.1-fold for DHA compared with the reference. We found an optimal formulation that spontaneously forms liquid crystal-based nanoparticles, improving the bioavailability of EPA and DHA, not found in the existing literature. Our findings offer insight into the impact of nanoparticle phase on the oral delivery of oil-soluble drugs and provide a novel Ω-3 EE formulation that improves the bioavailability of EPA and DHA.

Preclinical assessment of nanostructured liquid crystalline particles for the management of bacterial keratitis: in vivo and pharmacokinetics study

The research work was driven to develop, optimize, and characterize novel nanostructured liquid crystalline particles as carriers for the ocular delivery of vancomycin. The formulations were developed by fragmenting the cubic crystalline phase of glycerol monooleate, water, and poloxamer 407. A four-factor, three-level Taguchi statistical experimental design was constructed to optimize the formulation. Formulations exhibited internal-cubic structure of the vesicles with particle size in the range of 51.11 ± 0.96 nm to 158.73 ± 0.46 nm and negative zeta potential. Ex vivo transcorneal permeation studies demonstrated that the optimized cubosomes had a 2.4-fold increase in apparent permeability co-efficient as compared to vancomycin solution, whereas in vivo studies in rabbits demonstrated that the severity of keratitis was considerably lowered on day 3 with optimized cubosomes. Ocular pharmacokinetic studies evaluated the level of drug in aqueous humor, and results revealed that the time to peak concentration (T_max) of vancomycin-loaded cubosomal formulation was about 1.9-fold higher and mean residence time was 2.2-fold greater than vancomycin solution. Furthermore, histological examination revealed that the corneal layers displayed well-maintained morphology without any stromal swelling, consequently indicating the safety of formulation. It could be concluded that the developed nanostructured liquid crystalline particles of vancomycin demonstrated improved pre-ocular residence time, increased permeability, reduced dosing frequency, controlled drug release, and reduced systemic side-effects. Results manifested that the developed vancomycin-loaded cubosomes could be a promising novel ocular carrier and an ideal substitute for conventional eye drops for the management of bacterial-keratitis.

Novel Amphiphilic Block Copolymers for the Formation of Stimuli-Responsive Non-Lamellar Lipid Nanoparticles

Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)-poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H2O2) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H2O2 and acidic pH conditions.

Microfluidic technologies for the synthesis and manipulation of biomimetic membranous nano-assemblies

Microfluidics has been proposed as an attractive alternative to conventional bulk methods used in the generation of self-assembled biomimetic structures, particularly where there is a desire for more scalable production. The approach also allows for greater control over the self-assembly process, and parameters such as particle architecture, size, and composition can be finely tuned. Microfluidic techniques used in the generation of microscale assemblies (giant vesicles and higher-order multi-compartment assemblies) are fairly well established. These tend to rely on microdroplet templation, and the resulting structures have found use as comparmentalised motifs in artificial cells. Challenges in generating sub-micron droplets have meant that reconfiguring this approach to form nano-scale structures is not straightforward. This is beginning to change however, and recent technological advances have instigated the manufacture and manipulation of an increasingly diverse repertoire of biomimetic nano-assemblies, including liposomes, polymersomes, hybrid particles, multi-lamellar structures, cubosomes, hexosomes, nanodiscs, and virus-like particles. The following review will discuss these higher-order self-assembled nanostructures, including their biochemical and industrial applications, and techniques used in their production and analysis. We suggest ways in which existing technologies could be repurposed for the enhanced design, manufacture, and exploitation of these structures and discuss potential challenges and future research directions. By compiling recent advances in this area, it is hoped we will inspire future efforts toward establishing scalable microfluidic platforms for the generation of biomimetic nanoparticles of enhanced architectural and functional complexity.

Cubosomes as a Potential Oral Drug Delivery System for Enhancing the Hepatoprotective Effect of Coenzyme Q10

Coenzyme Q10 (CoQ10) acts as an antioxidant that protects the cells by preventing lipid peroxidation. Owing to its low solubility, CoQ10 has shown poor delivery properties and poor bioavailability. The aim of this study is to develop CoQ10 loaded cubosomes in order to enhance its oral delivery and hepatoprotective activity. Cubosomes are cubic nanostructured systems resulting from the colloidal dispersion of cubic liquid crystalline structure in water. CoQ10 loaded cubosomes were prepared using poloxamer 407 and glyceryl monooleate at three weight ratios (1:2.5, 1:5 and 1:7.5) and were further characterized. They were investigated for their hepatoprotective effect in thioacetamide (TAA) induced hepatotoxicity in Wistar rats. The developed CoQ10 cubosomes exhibited moderate to high entrapment efficiency percentages (44.69-75.96%), nanometric dimensions (132.4-223.2 nm), and negatively charged zeta potential values (<-21.3). In-vitro release profiles showed a sustained release of CoQ10 from the developed cubosomes up to 48 h. In-vivo study revealed an improved hepatoprotective effect of CoQ10 cubosomes via reducing liver enzymes, nitric oxide and malondialdehyde as well as elevating phosphoinositide 3-kinase, catalase and glutathione peroxidase, compared to plain drug. These results were in good agreement with histopathological investigations. Consequently, the developed cubosomes showed a potential effect in enhancing the hepatoprotective activity of CoQ10.

Nose-to-brain delivery of disulfiram nanoemulsion in situ gel formulation for glioblastoma targeting therapy

Glioblastoma (GBM) is a difficult-to-treat cancer, likely attributed to the blood brain barrier and drug resistance. Nose-to-brain drug delivery is a direct and non-invasive pathway for brain targeting with low systemic toxicity. Disulfiram (DSF) has shown its effectiveness against GBM, especially with copper ion (Cu). In this work, we designed a DSF loaded ion-sensitive nanoemulsion in situ gel (DSF-INEG) that was delivered intranasally along with Cu to the rat brains for the GBM treatment. The developed DSF-INEG nanomedicine showed a suitable particle size of 63.4 ± 1.1 nm and zeta potential of -23.5 ± 0.2 mV with a favorable gelling ability and prolonged DSF release. The results in vitro indicate DSF-INEG/Cu effectively inhibited the proliferation of both C6 and U87 cells. Besides, the excellent brain-targeting efficacy via nose-to-brain delivery was proved by the highest fluorescence signal of Cy5.5-INEG in the rat brains. Moreover, GFP imaging showed enhanced tumor growth inhibition of the rats by the DSF-INEG/Cu treatment, and their median survival time was 1.6 and 1.2 folds than those of the rats in the control and DSF/Cu treated groups, respectively, with no obvious histopathological damage to normal tissues. Overall, DSF-INEG/Cu could be a promising intranasal nanomedicine for effective GBM treatment.

Meloxicam encapsulated nanostructured colloidal self-assembly for evaluating antitumor and anti-inflammatory efficacy in 3D printed scaffolds

Nanostructured colloidal self-assembly (NCS) is one of the most promising drug delivery carriers in cancer treatment. The present research work aimed towards synthesizing meloxicam (MLX) loaded NCS for its improved circulation half-life and increased cellular internalization. NCS was formulated using glyceryl monoolein, Pluronic® F127, and MLX. Quality by Design experiments with a quadratic model was subjected to optimization of the formulation. The optimized NCS with an average particle size of 185.5 ± 3.02 nm showed higher MLX encapsulation (94.74 ± 3.41%) and sustained release behavior of MLX up to 24 hr. in vitro cytotoxicity of the developed NCS with MCF-7 and MDA-MB-231 cell lines confirmed lower cell viability and a higher rate of cell growth inhibition. This MLX loaded NCS showed dual activity as an antitumor and anti-inflammatory in highly invasive estrogen-dependent MDA-MB-231 cells due to the high expression of cyclooxygenase-2 (COX-2). Besides, an activity of the MLX-NCS was also observed in 3D printed MCF-7 cells. This investigation shows the possible use of MLX-NCS as an efficient cancer drug delivery system with excellent colloidal stability, sustained release of MLX, enhanced antitumor and anti-inflammatory efficacy in 3D printed scaffolds. In contrast to toxicity study in 2D culture, the 3D constructs revealed the activity of the MLX via COX-2 independent mechanism and demonstrated that the relationship between COX-2 expression and antitumor activity of inhibitors is limited. In conclusion, the overall observations and results of this study strengthen the hypothesized development of NCS as a next-generation therapeutics regimen for cancer therapy.

Research progress in the application of in situ hydrogel system in tumor treatment

The in situ hydrogel drug delivery system is a hot research topic in recent years. Combining both properties of hydrogel and solution, in situ hydrogels can provide many advantages for drug delivery application, including easy application, high local drug concentration, prolonged drug retention time, reduced drug dose in vivo, good biocompatibility and improved patient compliance, thus has potential in tumor treatment. In this paper, the related literature reports in recent years were reviewed to summarize and discuss the research progress and development prospects in the application of in situ hydrogels in tumor treatment.

Brain Targeting of Duloxetine HCL via Intranasal Delivery of Loaded Cubosomal Gel: In vitro Characterization, ex vivo Permeation, and in vivo Biodistribution Studies

Purpose

Duloxetine (DLX) is dual serotonin and norepinephrine reuptake inhibitor suffering from limited bioavailability (≈ 40%) due to extensive hepatic metabolism. This work aims to formulate and evaluate DLX intranasal thermoreversible cubosomal gels to enhance its bioavailability and ensure efficient brain targeting.

Materials and Methods

Cubo-gels were prepared by 3³ central composite design with three independent factors, lipid ratio (glycerol monooleate: glycerol tripalmitate), Pluronic F127%, and Pluronic F68%. The prepared formulations were evaluated for their particle size (PS), gelling temperature (GT), entrapment efficiency (EE%), and in vitro release. The cubo-gel with the highest desirability (0.88) was chosen as the optimized formulation. DLX cubo-gel was evaluated using differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray powder diffraction, and transmission electron microscopy. Cytotoxicity study, ex vivo permeation study and in vivo bio-distribution study were conducted to evaluate the safety and efficacy of brain targeting.

Results

The optimum cubo-gel was composed of 3.76 lipid ratio, 20% w/v PF127, and 5% w/v PF68. It had PS of 265.13 ± 9.85 nm, GT of 32 ± 0.05°C, EE% of 98.13 ± 0.50%, and showed controlled release behavior where 33% DLX was released within 6 hrs. The plain in situ cubo-gel had a significantly higher IC₅₀ compared to DLX solution and DLX-loaded in situ cubo-gel. The ex vivo permeation study showed 1.27 enhancement in the drug permeation from DLX in situ cubo-gel. According to the in vivo bio-distribution study in plasma and brain, the intranasal DLX in situ cubo-gel showed a 1.96 fold improvement in brain bioavailability compared to the intranasal solution. Its BTE% and DTP% were 137.77 and 10.5, respectively, indicating efficient brain targeting after intranasal administration.

Conclusion

Accordingly, intranasal DLX in situ cubo-gel can be considered as an innovative nano-carrier delivery system for bioavailability enhancement and efficient brain targeting of DLX to maximize its effect.

Injectable Lipid-Based Depot Formulations: Where Do We Stand?

The remarkable number of new molecular entities approved per year as parenteral drugs, such as biologics and complex active pharmaceutical ingredients, calls for innovative and tunable drug delivery systems. Besides making these classes of drugs available in the body, injectable depot formulations offer the unique advantage in the parenteral world of reducing the number of required injections, thus increasing effectiveness as well as patient compliance. To date, a plethora of excipients has been proposed to formulate depot systems, and among those, lipids stand out due to their unique biocompatibility properties and safety profile. Looking at the several long-acting drug delivery systems based on lipids designed so far, a legitimate question may arise: How far away are we from an ideal depot formulation? Here, we review sustained release lipid-based platforms developed in the last 5 years, namely oil-based solutions, liposomal systems, in situ forming systems, solid particles, and implants, and we critically discuss the requirements for an ideal depot formulation with respect to the used excipients, biocompatibility, and the challenges presented by the manufacturing process. Finally, we delve into lights and shadows originating from the current setups of in vitro release assays developed with the aim of assessing the translational potential of depot injectables.

Delineating penetration enhancer-enriched liquid crystalline nanostructures as novel platforms for improved ophthalmic delivery

Liquid crystalline nanostructures (LCNs), for instance cubosomes, have been widely used as a promising carrier for drug delivery through the last few years. To date, the ophthalmic application of these platforms was not well explored, and the effect of integrating penetration enhancers (PEs) into LCNs has not been investigated yet. Hence, the present work aimed coupling novel PEs into glyceryl monooleate-based cubosomes for ocular administration. Various enhancers viz, free fatty acids (oleic and linoleic acids), natural terpenes (D-limonene and cineole), medium-chain triglycerides (Captex® 1000 and Captex® 8000), mono-/di-glycerides (Capmul® MCM, Capmul® PG-8, and Capmul® PG-12) were tested at different amounts. The morphology of the formed LCNs was investigated using transmission electron microscopy (TEM). The crystallinity and thermal behavior studies were also conducted. The ocular safety of optimized formulae was tested via hen's egg test-chorioallantoic membrane (HET-CAM), rabbit eye Draize test, and histopathological examinations of ocular tissues. Confocal laser scanning microscopy (CLSM) was utilized to assess the enhanced permeation of fluorescently-labeled LCNs across corneal layers. The acceptable formulations exhibited relatively homogenous particle nano-sizes ranging from 139.26 ± 3.68 to 590.56 ± 24.86 nm carrying negative surface charges. TEM images, X-ray patterns and DSC thermograms demonstrated the influential effect of PEs in developing altered crystalline structures. The ocular compatibility of optimized LCNs was confirmed. The corneal distribution using CLSM proved the disseminated fluorescence intensity of LCNs enriched with oleic acid, Captex® 8000 and Capmul® MCM. Selected LCNs showed good physical stability upon storage and lyophilization. The results demonstrated the efficiency of tailored PE-modified LCNs in enhancing the ocular transport with no evidence of any irritation potential, and hence suggested their prospective applicability in ophthalmic drug delivery.

Advances in the Design of pH-Sensitive Cubosome Liquid Crystalline Nanocarriers for Drug Delivery Applications

Nanostructure bicontinuous cubic phase self-assembled materials are receiving expanding applications as biocompatible delivery systems in various therapeutic fields. The functionalization of cubosome, spongosome, hexosome and liposome nanocarriers by pH-sensitive lipids and/or pH-sensitive polymer shells offers new opportunities for oral and topical drug delivery towards a new generation of cancer therapies. The electrochemical behavior of drug compounds may favor pH-triggered drug release as well. Here, we highlight recent investigations, which explore the phase behavior of mixed nonlamellar lipid/fatty acid or phospholipid systems for the design of pH-responsive and mucoadhesive drug delivery systems with sustained-release properties. X-ray diffraction and small-angle X-ray scattering (SAXS) techniques are widely used in the development of innovative delivery assemblies through detailed structural analyses of multiple amphiphilic compositions from the lipid/co-lipid/water phase diagrams. pH-responsive nanoscale materials and nanoparticles are required for challenging therapeutic applications such as oral delivery of therapeutic proteins and peptides as well as of poorly water-soluble substances. Perspective nanomedicine developments with smart cubosome nanocarriers may exploit compositions elaborated to overcome the intestinal obstacles, dual-drug loaded pH-sensitive liquid crystalline architectures aiming at enhanced therapeutic efficacy, as well as composite (lipid/polyelectrolyte) types of mucoadhesive controlled release colloidal cubosomal formulations for the improvement of the drugs' bioavailability.

Functionalized Folate-Modified Graphene Oxide/PEI siRNA Nanocomplexes for Targeted Ovarian Cancer Gene Therapy

Gene therapy is emerging as a valid method for the treatment of ovarian cancer, including small interfering RNA (siRNA). Although it is so powerful, few targeting efficient gene delivery systems seriously hindered the development of gene therapy. In this study, we synthesized a novel gene vector PEG-GO-PEI-FA by functionalized graphene oxide (GO), in which folic acid (FA) can specifically bind to the folate receptor (FR), which is overexpressed in ovarian cancer. Characterizations of the nanocomplexes were evaluated by dynamic light scattering (DLS), atomic force microscopy (AFM), and Fourier transform infrared spectroscopy (FTIR). The siRNA condensation ability and stability were assessed by agarose gel electrophoresis. Cellular uptake efficiency and lysosomal escape ability in ovarian cancer cells were investigated by confocal laser scanning microscopy. Furthermore, cellular biosafety of the system and inhibitory of the siRNA tolerability were evaluated by CCK-8 assay. The size of the PEG-GO-PEI-FA nanocomplexes was 216.1 ± 2.457 nm, exhibiting mild cytotoxicity in ovarian cancer cells. With high uptake efficiency, PEG-GO-PEI-FA can escape from the lysosome rapidly and release the gene. Moreover, PEG-GO-PEI-FA/siRNA can effectively inhibit the growth of ovarian cancer cells. By and large, the PEG-GO-PEI-FA/siRNA may offer a promising strategy for siRNA delivery in the treatment of FR-positive ovarian carcinoma or similar tumors.

Potential application of novel liquid crystal nanoparticles of isostearyl glyceryl ether for transdermal delivery of 4-biphenyl acetic acid

Novel liquid crystal nanoparticles (LCNs) composed of isostearyl glyceryl ether (GE-IS) and ethoxylated hydrogenated castor oil (HCO-60) were developed for the enhanced transdermal delivery of 4-biphenyl acetic acid (BAA). The physical properties and pharmaceutical properties of the LCNs were measured. The interaction between the intercellular lipid model of the stratum corneum and the LCNs was observed to elucidate the skin permeation mechanism. In the formulation, the LCNs form niosomes with mean particles sizes of 180-300 nm. The skin absorption mechanisms of LCNs are different, depending upon the application and buffer concentration. The LCNs composed of GE-IS and HCO-60 are attractive tools for use as transdermal drug delivery systems carriers for medicines and cosmetics, due to their high efficiency and safety.

Protoporphyrin IX-loaded laminarin nanoparticles for anticancer treatment, their cellular behavior, ROS detection, and animal studies

Laminarin conjugate-based nano-scaled particles were in this study proposed as a delivery system for protoporphyrin IX (Pp IX) in photodynamic therapy (PDT) of human breast cancer cells (MCF-7). Hematin-Laminarin-Dithiodipropionic Acid-MGK, named as HLDM, was an amphiphilic carrier material with dual pH/redox sensitive that could be used to load hydrophobic drug to improve their solubility and enhance biocompatibility. Therefore, we combined photosensitizer (Pp IX) with HLDM to fabricate a novel nano-micelles, herein called Pp IX-loaded HLDM micelles. The Pp IX-loaded HLDM micelles were 149.3 ± 35 nm sized in neutral water. Phototoxicity, in vitro PDT effect, and dual sensibility to pH and redox microenvironment of Pp IX-loaded HLDM micelles were examined at different concentrations by using MCF-7 human breast cancer cells. The experiments on phototoxicity and reactive oxygen species (ROS) production proved that the micelles could produce PDT to kill the cancer cells with a certain wavelength light. The apoptosis experiment indicated that the micelles could cause nuclear damage. In vivo PDT effect of the micelles was studied by constructing the tumor-bearing nude mouse model of MCF-7 cells. In vivo studies showed that the Pp IX-loaded HLDM micelles could induce remarkable anti-tumor effect. A promising laminarin-based nanomedicine platform acts as a new drug delivery system to enhance the uptake, accumulation, and PDT efficacy of Pp IX in vitro and in vivo.

One-Step Synthesis of Nitrogen-Doped Hydrophilic Mesoporous Carbons from Chitosan-Based Triconstituent System for Drug Release

In situ nitrogen-doped hydrophilic mesoporous carbon spheres with different carbon-to-silicon (C/Si) ratios (NMCs-x/3, x = 5, 6, 7, and 8) were prepared by one-step method coupled with a spray drying and carbonizing technique, in which triblock copolymer (F127) and tetraethyl orthosilicate (TEOS) were used as template agents, and biocompatible chitosan (CS) was used as the carbon source and nitrogen source. These carbon materials were characterized by TG, BET, XRD, Raman, FTIR, TEM, XPS, and contact angle measuring device. The adsorption and release properties of mesoporous carbon materials for the poorly soluble antitumor drug hydroxycamptothecin (HCPT) were investigated. Results showed that nanospherical mesoporous carbon materials were successfully prepared with high specific surface area (2061.6 m²/g), narrowly pore size distribution (2.01-3.65 nm), and high nitrogen content (4.75-6.04%). Those NMCs-x showed a satisfactory hydrophilicity, which gradually increased with the increasing of surface N content. And the better hydrophilicity of NMCs-x was, the larger adsorption capacity for HCPT. The absorption capacity of NMCs-x towards HCPT was in the following orders: q_NMCs-5/3 > q_NMCs-6/3 > q_NMCs-7/3 > q_NMCs-8/3. NMCs-5/3 had the largest saturated adsorption capacity of HCPT (1013.51 mg g^-1) and higher dissolution rate (93.75%).

Nanostructured cubosomes in an in situ nasal gel system: an alternative approach for the controlled delivery of donepezil HCl to brain

The purpose of this research was to develop cubosomal mucoadhesive in situ nasal gel to enhance the donepezil HCl delivery to the brain. Glycerol mono-oleate (GMO) and surfactant poloxamer 407 were used to prepare cubosomes. The developed formulations were characterized for particle size (PS), poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), transmission electron microscopy (TEM), in vitro drug release and in vivo bio-distribution study in blood and brain tissue. Central composite design was used for the optimization purpose and the selected formulation (containing GMO 2 g and poloxamer 1.5%) was prepared in presence of gellan gum and konjac gum as gelling agent and mucoadhesive agent respectively. The optimal cubosomal dispersion and optimal cubosomal mucoadhesive in situ nasal gel were subjected to in vivo bio-distribution studies in rat model. It showed significantly higher transnasal permeation and better distribution to the brain, when compared to the drug solution. Thus, the formulated cubosomal mucoadhesive in situ gel could be considered as a promising carrier for brain targeting of CNS acting drugs through the transnasal route.

Development of self-assembled nanocarriers to enhance antitumor efficacy of docetaxel trihydrate in MDA-MB-231 cell line

Self-assembled nanocarriers (SANs) as a novel colloidal controlled delivery for docetaxel trihydrate (DTX) were engineered by high-pressure homogenization method to overcome the several clinical problems. Drug-excipient compatibility was studied using DSC and FTIR spectroscopy. The fabricated SANs was characterized by particle size, zeta potential, and SEM. QbD based central composite design of experiment was employed for formula optimization. The cell viability of DTX-hydroalcoholic solution (DTX-HA) and DTX-loaded SANs has been determined in MDA-MB-231 cell line by MTT assay. The stability study of selected SANs formulations were carried out at various storage conditions as per ICH guidelines. The summary of results obtained shows high drug content with higher entrapment efficiency (91.23 ± 3.41% w/w) of DTX-loaded SANs. It shows diffusion controlled release of DTX over the period of 12 h which is higher than DTX-HA solution, releases the DTX within 4 h. The MTT assay expressed lower cellular viability and improved cell inhibition leads to increase cytotoxicity of formulations towards cells. The stability study reveals stability of DTX-loaded SANs formulations at various storage conditions over a period of three months. The strong experimental evidence confirms the SANs as an effective approach to formulate the controlled delivery system of antineoplastics with improved stability.

Decoration of Nanovesicles with pH (Low) Insertion Peptide (pHLIP) for Targeted Delivery

Acidity at surface of cancer cells is a hallmark of tumor microenvironments, which does not depend on tumor perfusion, thus it may serve as a general biomarker for targeting tumor cells. We used the pH (low) insertion peptide (pHLIP) for decoration of liposomes and niosomes. pHLIP senses pH at the surface of cancer cells and inserts into the membrane of targeted cells, and brings nanomaterial to close proximity of cellular membrane. DMPC liposomes and Tween 20 or Span 20 niosomes with and without pHLIP in their coating were fully characterized in order to obtain fundamental understanding on nanocarrier features and facilitate the rational design of acidity sensitive nanovectors. The samples stability over time and in presence of serum was demonstrated. The size, ζ-potential, and morphology of nanovectors, as well as their ability to entrap a hydrophilic probe and modulate its release were investigated. pHLIP decorated vesicles could be useful to obtain a prolonged (modified) release of biological active substances for targeting tumors and other acidic diseased tissues.

Nanostructured liquid crystalline formulation as a remarkable new drug delivery system of anti-epileptic drugs for treating children patients

PURPOSE

Development of a new dosage-form of antiepileptic-drugs appropriated for children.

METHODS

Clonazepam (Cl) was formulated as cubosomal-gel (cub-gel) to be used as a patch reservoir through transdermal-route. Cubosomes prepared using glycerol-mono-oleate(GMO)/Pluronic-F127(PF127) mixture. An actual-statistical design was used to investigate the effect of different stabilizing agents (Ethanol and PVA) and surfactant concentration on cubosomes' particle size and entrapping-efficiency. The selected formulae were evaluated by testing particle-morphology, in vitro drug release and stability. Cub-gel was prepared using selected cubosome formulae. The optimal cub-gel subjected to in vitro dissolution, ex-vivo permeation and skin deposition studies followed by studying its pharmacological effect.

RESULTS

Using PVA or Et as stabilizers with PF127 significantly decreases the average cubosomes'PS (352 ±  2.8 and 264 ± 2.16 nm) and increases EE (58.97 ± 4.57% and 54.21 ± 3.89%). Cubosomes increase the initial release rate of Cl to ensure rapid therapeutic effect (37.39% and 46.04% in the first hour) followed by a prolonged release till 4 h. Cub-gel containing PVA showed significantly higher Cl-transdermal permeation when compared to Cl-suspension. Moreover, increases the retention-time (89.57% at 48 h) and skin-deposition up to 6-times. It also reduces the epileptic seizures and alters the behavioral parameters induced by pilocarpine.

CONCLUSIONS

Cubosomal-gel could be considered an innovative dosage-form for Cl through the transdermal route.