Mucoadhesive Properties of Eudragit®RS100, Eudragit®S100, and Poly(ε-caprolactone) Nanocapsules: Influence of the Vehicle and the Mucosal Surface

Controlled dual drug release from adhesive electrospun patches for prevention and treatment of alveolar osteitis

Approximately one in five individuals experience alveolar osteitis (AO) following wisdom tooth extraction. AO is characterised by loss of the blood clot from the tooth extraction socket leading to infection and pain, resulting in repeated hospital visits that impose a substantial burden on healthcare systems. Current treatments are sub-optimal; to address this we developed a novel drug-loaded mucoadhesive patch composed of dual electrospun polyvinyl pyrrolidone/Eudragit RS100 (PVP/RS100) and poly(N-isopropylacrylamide) (PNIPAM) fibres protected by a poly(ε-caprolactone) (PCL) backing layer. These patches demonstrated controlled release of the long-acting analgesic bupivacaine HCl and the anti-inflammatory drug prednisolone. Topical application of patches to tissue-engineered gingival mucosa showed that patch-released bupivacaine and prednisolone achieved sustained tissue permeation with 54.8 ± 3.3 % bupivacaine HCl and 65.8 ± 5.1 % prednisolone permeating the epithelium after 24 h. The drugs retained their functionality after release; bupivacaine HCl significantly (p < 0.05) inhibited veratridine-induced intracellular calcium flux in SH-SY5Y neuronal cells, while prednisolone significantly reduced gene expression of IL-6 (2-fold; p < 0.001), CXCL8 (5.1-fold; p < 0.01) and TNF-α (1.5-fold; p < 0.001) in stimulated THP-1 monocytes. Taken together, these data show that dual electrospun patches have the potential to provide a mucoadhesive covering to prevent blood clot loss while delivering pain relief and anti-inflammatory therapeutics at tooth extraction sites to prevent and treat AO. This study not only offers a future therapeutic pathway for AO but also contributes valuable insights into future advancements in drug delivery devices for periodontal or oral mucosal tissue.

In situ hydrogel containing diazepam-loaded nanostructured lipid carriers (DZP-NLC) for nose-to-brain delivery: development, characterization and deposition studies in a 3D-printed human nasal cavity model

The nasal route has been investigated as a promising alternative for drug delivery to the central nervous system, avoiding passage through the blood-brain barrier and improving bioavailability. In this sense, it is necessary to develop and test the effectiveness of new formulations proposed for the management of neurological disorders. Thereby, the aim of this work was to develop and characterize an ion sensitive in situ hydrogel containing diazepam-loaded nanostructured lipid carriers (DZP-NLC) for nasal delivery in the treatment of epilepsy. Physical characterization of the developed formulations was performed and included the evaluation of rheological features, particle size, polydispersity index (PDI) and zeta potential (ZP) of an in situ hydrogel containing DZP-NLC. Afterwards, in vitro drug release, in vitro mucoadhesion and biocompatibility studies with RPMI 2650 nasal cells were performed. The in situ hydrogel containing DZP-NLC was aerosolized with a nasal spray device specifically designed for nose-to-brain delivery (VP7 multidose spray pump with a 232 N2B actuator) and characterized for droplet size distribution and spray cone angle. Finally, the deposition pattern of this hydrogel was evaluated in a 3D-printed human nasal cavity model. The developed in situ hydrogel containing DZP-NLC presented adequate characteristics for nasal administration, including good gelling ability, mucoadhesiveness and prolonged drug release. In addition, after inclusion in the hydrogel net, the particle size (81.79 ± 0.53 nm), PDI (0.21 ± 0.10) and ZP (-30.90 ± 0.10 mV), of the DZP-NLC remained appropriate for nose-to-brain delivery. Upon aerosolization in a nasal spray device, a suitable spray cone angle (22.5 ± 0.2°) and adequate droplet size distribution (Dv (90) of 317.77 ± 44.12 µm) were observed. Biocompatibility studies have shown that the developed formulation is safe towards RPMI 2650 cells in concentrations up to 100 μg/mL. Deposition studies on a 3D-printed human nasal cavity model revealed that the best nasal deposition profile was obtained upon formulation administration without airflow and at an angle from horizontal plane of 75°, resulting in 47% of administered dose deposited in the olfactory region and 89% recovery. The results of this study suggested that the intranasal administration of the developed in situ hydrogel containing DZP-NLC could be a promising alternative to the conventional treatments for epilepsy.

Quality by Design-Guided Systematic Development and Optimization of Mucoadhesive Buccal Films

Mucoadhesive buccal films have found increased popularity in pharmaceutical drug delivery due to the several advantages that they possess. The present study strives to develop and optimize chitosan-based mucoadhesive buccal films by relying on quality-by-design (QbD) principles. Previous knowledge and experience were employed to firstly identify the critical quality attributes (CQAs), followed by a thorough risk assessment, which led to the selection of seven critical material attributes and process parameters, namely, the polymer grade and concentration, the plasticizer type and concentration, the citric acid (CA) concentration, the amount of the casted solution, and the drying condition. Their effects on the breaking hardness and mucoadhesivity, selected as CQAs, were investigated in three steps by three designs of the experiment (DoE). The medium molecular weight of chitosan (CH) was the preferred choice in the optimized formulation, and its concentration was the most important factor affecting the CQAs, thickness, and moisture content of the films. It was found that 0.364 g/cm2 was the suitable amount of the casting solution, and its optimum drying conditions were presented in the form of a design space. Glycerol (Gly) was the best choice as a plasticizer, and a design space representing several combinations of CH and CA concentrations that produce films with the required quality was constructed at a fixed concentration of 35% Gly. A formula from this design space was selected and employed to load with two model drugs to test its drug-carrying properties for drugs with different physicochemical characteristics. Uniform drug distribution with an immediate release profile was achieved in both drugs, although one of the CQAs was outside of the specifications in the case of lidocaine-containing film. To summarize, the obtention of the optimum mucoadhesive buccal film based on CH was efficiently facilitated by the rational application of QbD principles and the DoE approach.

A facile one-stone-two-birds strategy for fabricating multifunctional 3D nanofibrous scaffolds

Local bacterial infections lead to delayed wound healing and in extreme cases, such as diabetic foot ulcers, to non-healing due to the impaired cellular function in such wounds. Thus, many scientists have focused on developing advanced therapeutic platforms to treat infections and promote cellular proliferation and angiogenesis. This study presents a facile approach for designing nanofibrous scaffolds in three dimensions (3D) with enhanced antibacterial activity to meet the need of treating chronic diabetic wounds. Being a cationic surfactant as well as an antimicrobial agent, octenidine (OCT) makes a 2D membrane hydrophilic, enabling it to be modified into a 3D scaffold in a "one stone, two birds" manner. Aqueous sodium borohydride (NaBH4) solution plays a dual role in the fabrication process, functioning as both a reducing agent for the in situ synthesis of silver nanoparticles (Ag NPs) anchored on the nanofiber surface and a hydrogen gas producer for expanding the 2D membranes into fully formed 3D nanofiber scaffolds, as demonstrated by morphological analyses. Various techniques were used to characterize the developed scaffold (e.g., SEM, XRD, DSC, FTIR, and surface wettability), demonstrating a multilayered porous structure and superhydrophilic properties besides showing sustained and prolonged release of OCT (61% ± 1.97 in 144 h). Thanks to the synergistic effect of OCT and Ag NPs, the antibacterial performance of the 3D scaffold was significantly higher than that of the 2D membrane. Moreover, cell viability was studied in vitro on mouse fibroblasts L929, and the noncytotoxic character of the 3D scaffold was confirmed. Overall, it is shown that the obtained multifunctional 3D scaffold is an excellent candidate for diabetic wound healing and skin repair.

Dual pH and microbial-sensitive galactosylated polymeric nanocargoes for multi-level targeting to combat ulcerative colitis

Ulcerative colitis (UC) is a type of inflammatory bowel disease characterized by inflammation, ulcers and irritation of the mucosal lining. Oral drug delivery in UC encounters challenges because of multifaceted barriers. Dexamethasone-loaded galactosylated-PLGA/Eudragit S100/pullulan nanocargoes (Dexa-GP/ES/Pu NCs) have been developed with a dual stimuli-sensitive coating responsive to both colonic pH and microbiota, and an underneath galactosylated-PLGA core (GP). The galactose ligand of the GP preferentially binds to the macrophage galactose type-lectin-C (MGL-2) surface receptor. Therefore, both stimuli and ligand-mediated targeting facilitate nanocargoes to deliver Dexa specifically to the colon with enhanced macrophage uptake. Modified emulsion method coupled with a solvent evaporation coating technique was employed to prepare Dexa-GP/ES/Pu NCs. The nanocargoes were tested using in vitro, ex vivo techniques and dextran sodium sulfate (DSS) induced UC model. Prepared nanocargoes had desired physicochemical properties, drug release, cell uptake and cellular viability. Investigations using a DSS-colitis model showed high localization and mitigation of colitis with downregulation of NF-ĸB and COX-2, and restoration of clinical, histopathological, biochemical indices, antioxidant balance, microbial alterations, FTIR spectra, and epithelial junctions' integrity. Thus, Dexa-GP/ES/Pu NCs found to be biocompatible nanocargoes capable of delivering drugs to the inflamed colon with unique targeting properties for prolonged duration.

Derivatized chitosan-oil-in-water nanocapsules for trans-cinnamaldehyde delivery

trans-Cinnamaldehyde, known for its bacterial anti-quorum sensing activity when applied at sublethal concentrations, has gained traction given its potential use against multidrug resistant bacteria. In this work, trans-cinnamaldehyde-loaded oil-in-water nanocapsules coated with chitosan, N,N,N-trimethyl chitosan chloride, N-(2-(N,N,N-trimethylammoniumyl)acetyl) chitosan chloride or N-(6-(N,N,N-trimethylammoniumyl)hexanoyl)chitosan chloride were obtained. All the formulated nanocapsules showed a Z-average hydrodynamic diameter ~ 160 nm and ζ-potential higher than +40 mV. N,N,N-trimethyl chitosan-coated oil-in-water nanocapsules showed the greatest trans-cinnamaldehyde association efficiency (99.3 ± 7.6) % and total payload release (88.6 ± 22.5) %, while N-(6-(N,N,N-trimethylammoniumyl)hexanoyl)chitosan chloride chitosan-coated oil-in-water nanocapsules were the only formulations stable in phosphate buffer saline PBS (pH 7.4) upon incubation at 37 °C for 24 h. Future work should address the stability of the developed nanocapsules in culture media and their biological performance.

A Systematic Overview of Eudragit® Based Copolymer for Smart Healthcare

Eudragit, synthesized by radical polymerization, is used for enteric coating, precise temporal release, and targeting the entire gastrointestinal system. Evonik Healthcare Germany offers different grades of Eudragit. The ratio of methacrylic acid to its methacrylate-based monomers used in the polymerization reaction defines the final product's characteristics and consequently its potential range of applications. Since 1953, these polymers have been made to use in a wide range of healthcare applications around the world. In this review, we reviewed the "known of knowns and known of unknowns" about Eudragit, from molecule to material design, its characterization, and its applications in healthcare.

Bioadhesive 3D-Printed Skin Drug Delivery Polymeric Films: From the Drug Loading in Mesoporous Silica to the Manufacturing Process

The alliance between 3D printing and nanomaterials brings versatile properties to pharmaceuticals, but few studies have explored this approach in the development of skin delivery formulations. In this study, clobetasol propionate (CP) was loaded (about 25% w/w) in mesoporous silica nanomaterial (MSN) to formulate novel bioadhesive and hydrophilic skin delivery films composed of pectin (5% w/v) and carboxymethylcellulose (5% w/v) by 3D printing. As a hydrophobic model drug, CP was encapsulated in MSN at a 3:1 (w/w) ratio, resulting in a decrease of CP crystallinity and an increase of its dissolution efficiency after 72 h (65.70 ± 6.52%) as compared to CP dispersion (40.79 ± 4.75%), explained by its partial change to an amorphous form. The CP-loaded MSN was incorporated in an innovative hydrophilic 3D-printable ink composed of carboxymethylcellulose and pectin (1:1, w/w), which showed high tensile strength (3.613 ± 0.38 N, a homogenous drug dose (0.48 ± 0.032 mg/g per film) and complete CP release after 10 h. Moreover, the presence of pectin in the ink increased the skin adhesion of the films (work of adhesion of 782 ± 105 mN·mm). Therefore, the alliance between MSN and the novel printable ink composed of carboxymethylcellulose and pectin represents a new platform for the production of 3D-printed bioadhesive films, opening a new era in the development of skin delivery systems.

A novel nanotechnological mucoadhesive and fast-dissolving film for vaginal delivery of clotrimazole: design, characterization, and in vitro antifungal action

Pullulan (PUL) films containing pomegranate seed oil and Eudragit^® RS100 nanocapsules loaded with clotrimazole (CTZ-NC-PUL) were developed to treat vulvovaginal candidiasis (VVC). Our findings showed that the nanocapsule average diameter was around 163 ± 4 nm, with polydispersity index values of up to 0.1 ± 0.01 and positively charged zeta potential (+ 43.5 ± 0.7 mV). The pH was in the acid range (5.14 ± 0.12) and encapsulation efficiency was around 99.6%; CTZ nanoencapsulation promoted higher homogeneity values for the film (91%), and the stability studies displayed no changes in the drug content after 120 days for the CTZ-NC-PUL under refrigerated conditions. All formulations were considered non-irritant, and CTZ-NC-PUL promoted a controlled release of the drug (60% in 24 h) compared to CTZ-PUL (100% in 8 h). The permeation results corroborate the drug release, where higher CTZ amounts were found in the mucosa and receptor medium for CTZ-PUL (21.02 and 4.46 μg/cm²). The films were fast dissolving (10 min), and CTZ-NC-PUL presented higher mucoadhesive properties; the antifungal activity against Candida albicans was maintained, and the in vitro efficacy of the film was proved. In conclusion, CTZ-NC-PUL formulation was considered promising and suitable for vaginal application against candida-related infections.

Buccal Thin Films as Potent Permeation Enhancers for Cytisine Transbuccal Delivery

Cytisine (CYT) is a powerful anti-smoking compound which could greatly benefit from transbuccal delivery because of both its unfavorable pharmacokinetics after oral administration and its intrinsic ability to permeate the buccal mucosa. This work aims to design CYT-loaded buccal thin films suitable for transbuccal drug delivery due to its capability of promoting the interaction between CYT and the buccal membrane. The solvent casting method was employed to prepare several thin films combining various excipients such as matrixing polymers, mucoadhesion agents, plasticizers and other compounds as humectants and sweeteners, component ratios and solvents. A total of 36 compositions was prepared and four of them emerged as the most promising in terms of aspect and flexibility. They all demonstrated homogeneity, thinness, low swelling degree, and controlled drug release according to the Power Law and Peppas-Sahlin mathematical models. Mainly, they proved able to interact with the ex vivo porcine buccal mucosa producing mucoadhesive effects, and act as potent permeation enhancers. In particular, Film B emerged as suitable as it produced a 10.6-fold Kp enhancement and a great Js value (52.33 μg/cm²·h^-1), even when compared to highly concentrated CYT solutions.

Vaginal Nanoformulations for the Management of Preterm Birth

Preterm birth (PTB) is a leading cause of infant morbidity and mortality in the world. In 2020, 1 in 10 infants were born prematurely in the United States. The World Health Organization estimates that a total of 15 million infants are born prematurely every year. Current therapeutic interventions for PTB have had limited replicable success. Recent advancements in the field of nanomedicine have made it possible to utilize the vaginal administration route to effectively and locally deliver drugs to the female reproductive tract. Additionally, studies using murine models have provided important insights about the cervix as a gatekeeper for pregnancy and parturition. With these recent developments, the field of reproductive biology is on the cusp of a paradigm shift in the context of treating PTB. The present review focuses on the complexities associated with treating the condition and novel therapeutics that have produced promising results in preclinical studies.

Spray-Dried Cytisine-Loaded Matrices: Development of Transbuccal Sustained-Release Tablets as a Promising Tool in Smoking Cessation Therapy

Cytisine (CYT) has emerged as a promising molecule to treat nicotine addiction, since it acts as a partial agonist of nicotinic acetylcholine receptors. However, its unfavorable pharmacokinetic properties lead to multiple administrations per day, reducing the patient’s compliance and increasing the side effects. To overcome these drawbacks, CYT buccal administration is here proposed. Firstly, CYT stability in the buccal environment was assessed and its intrinsic ability to permeate/penetrate the tissue was determined by applying CYT solutions at increasing concentrations. Furthermore, a spray-drying method was selected and optimized as it is an eco-friendly, easily scalable and effective technique to obtain uniform and reproducible CYT-loaded (5% w/w) pharmaceutical powders, which were directly compressed, thus obtaining different buccal delivery systems (BDSs). The obtained BDSs were homogeneous and reproducible and embedded CYT in its amorphous form. The mechanism of CYT release was evaluated in vitro and found to be mainly driven by a Fickian diffusion phenomenon. Predominantly, the ex vivo permeation assays highlighted the ability of the BDSs to enhance CYT permeation, also producing high drug fluxes through the mucosa. Speculative mathematical evaluations based on the already-known CYT pharmacokinetic parameters showed that CYT-loaded BDSs could potentially be sufficient to obtain a therapeutic effect, thus making the reported formulations suitable candidates for further in vivo trials.

Silicon Oxycarbide Porous Particles and Film Coating as Strategies for Tenofovir Controlled Release in Vaginal Tablets for HIV Prevention

Sustained release of antiretroviral drugs is currently the most encouraging strategy for the prevention of the sexual transmission of HIV. Vaginal tablets based on hydrophilic gelling polymers are an interesting dosage form for this purpose, since they can be developed to modify the release of the drug depending on the tablet swelling. Tenofovir is a drug with proven activity in the prevention of HIV-1 infection, and it is possible to have it loaded in the surface of γ-aminopropyl trimethoxy silane-functionalized oxycarbide particles. These particles can be incorporated into the tablets, thus providing a sustained release of the drug. Moreover, the presence of the particles modifies the microstructure of the gel formed, as observed in scanning electron microscopy and Hg porosimetry studies, resulting into a gel with a narrow pore size distribution between 10 and 100 µm. This implies a lower volume of fluid incorporated into the gel during swelling studies, and therefore improved mucoadhesion times in ex vivo test. The coating of the formulations with Eudragit® RS modifies the swelling behavior of the tablets, which not only is decreased in magnitude but also extended in time, and as consequence the drug release is also prolonged for up to 7 days.

Redispersible 3D printed nanomedicines: An original application of the semisolid extrusion technique

Semisolid extrusion is a layer-by-layer 3D printing technique that produces objects from gels or pastes. This process can be carried out at room temperature, without using a light source, and has been explored in pharmaceutics in the last few years. In this regard, our group hypothesized its suitability for the production of three-dimensional (3D) printed nanomedicines containing drug-loaded organic nanocarriers. In this study, the original application of the semisolid extrusion was evaluated to produce redispersible 3D printed oral solid forms containing drug-loaded polymeric nanocapsules. A carboxymethyl cellulose hydrogel containing resveratrol and curcumin co-encapsulated in nanocapsules was prepared, and the nanocapsules did not change its complex viscosity and yield stress. Homogeneous and yellow cylindrical-shaped solid forms were printed, with a mean weight of 0.102 ± 0.015 g, a polyphenol content of approximately 160 μg/unit, disintegration time of <45 min, and recovery of the nanosized carriers. The polyphenols were completely released from the solid forms after 8 h, although part of them remained encapsulated in the nanocapsules. This study represents a proof of concept concerning the use of semisolid extrusion to produce 3D printed forms composed of polymeric nanocapsules in a one-step process. It proposes an original platform for the development of solid nanomedicines from liquid aqueous nanocapsule suspensions.

Evaluation of an efficient and skin-adherent semisolid sunscreen nanoformulation

INTRODUCTION

Sunscreens are substances applied on the skin surface to protect the skin from the harmful effects of UV light. Nanoparticles can increase the retention time of the sunscreen on the skin surface and its efficacy, by acting as physical barriers. The present investigation aimed to prepare and characterize benzophenone-3-loaded lipid core nanocapsules coated with chitosan (CH-LNC) and, after obtaining a suitable semisolid formulation for skin application, to evaluate the influence of the nanocapsules chitosan-coating on the skin adhesion and photoprotective effect of the sunscreen.

METHODS

CH-LNC were obtained by the interfacial deposition of pre-formed polymer. The semisolid formulation was obtained using hydroxyethyl cellulose as gel-forming polymer. Skin adhesion experiments were performed by keeping skin membranes with formulation under water at 32oC for up to 60 minutes. Photoprotective effect was analyzed by the capacity of the formulations to protect a photo unstable substance (resveratrol) from degradation under UV light.

RESULTS

CH-LNC presented size of around 150nm, with low polydispersity, positive zeta potential, due to chitosan, and benzophenone-3 encapsulation efficiency of close to 100% (3mg/mL). The proposed gel presented suitable consistence and pH for skin application. Although coated and uncoated LNC increased benzonphenone-3 skin adhesion after 10 minutes of water immersion, only the nanoparticles coated with chitosan were able to do so after 60 minutes. CH-LNC increased the photoprotection of the sunscreen under UVA and UVB light after 60 minutes of exposure, probably due to the bioadhesion and film-forming properties of chitosan.

CONCLUSION

The chitosan coating of benzophenone-3-loaded LNC increased the skin adhesion and the photoprotective effect of the sunscreen.

Drug-loaded mesoporous silica on carboxymethyl cellulose hydrogel: Development of innovative 3D printed hydrophilic films

3D printing has been explored as an emerging technology for the development of versatile and printable materials for drug delivery. However, the alliance of 3D printing and nanomaterials has, to date, been little explored in pharmaceutics. Herein, a mesoporous silica with nanostructured pores, SBA-15, was used as a drug carrier for triamcinolone acetonide, a hydrophobic drug, with the aim of incorporating the drug formulation in a hydrophilic printable ink. The adsorption of the drug in the SBA-15 pores was confirmed by the decrease in its surface area and pore volume, along with an increase in the apparent aqueous solubility of triamcinolone acetonide, as shown by in vitro release studies. Thereafter, a hydrophilic ink composed of carboxymethyl cellulose containing drug-loaded SBA-15 was formulated and 3D printed as hydrophilic polymeric film using the semisolid extrusion technique (SSE). The 3D printed films showed complete drug release after 12 h, and the presence of the triamcinolone acetonide-loaded SBA-15 improved their in vitro mucoadhesion, suggesting their promising application in oral mucosa treatments. Besides representing an innovative platform to develop water-based mucoadhesive formulations containing a hydrophobic drug, this is the first report proposing the development of SSE 3D printed nanomedicines containing drug-loaded mesoporous silica.

Development of Eudragit® Nanoparticles for Intranasal Drug Delivery: Preliminary Technological and Toxicological Evaluation

Intranasal administration has assumed in the last years an increasing value as an alternative strategy for the systemic adsorption of drugs, as an alternative to oral and parenteral routes thanks to the high vascularized nasal mucosa. Nevertheless, different drug features may restrict its absorption through the nasal mucosa with an insufficient diffusion to the systemic circulation. Several technological strategies are under investigation to improve drug absorption during nasal formulation design and production. The use of bioadhesive polymers can be considered a valid approach to pursue the aforementioned goal. Based on this consideration, Eudragit® Retard RS100 and RL100 resins were selected as positively charged copolymers to prepare polymeric NPs with potential mucoadhesive properties suitable for intranasal application. NPs were produced by the Quasi-emulsion Solvent Evaporation (QESD) method and loaded with diclofenac acid (DIC) or its epolamine salt (DIEP). Preliminary investigations were performed to obtain the optimized blank formulation and drugs loaded NPs evaluating different parameters that can affect particles size and polydispersity. The optimized formulations unloaded and loaded with DIC and DIEP were further evaluated for their thermotropic behavior by differential scanning calorimetry. Mucoadhesive evaluation was assessed by measuring variation in zeta potential and by turbidimetric assay after incubation of particles with mucin in simulated nasal fluid (SNF) at 37 °C at different time points (0, 1 and 24 h) compared to the pure suspensions. Stability of DIC and DIEP loaded NPs was also evaluated in SNF to predict potential aggregation phenomena after nasal administration. Finally, in vivo experiments showed absence of toxicity on the nasal mucosa of mice.

Toltrazuril-Loaded Polymeric Nanocapsules as a Promising Approach for the Preventive Control of Coccidiosis in Poultry

Coccidiosis is a disease caused by intracellular protozoan parasites of the genus Eimeria that affect the intestinal tract of poultry. However, strain resistance and drug residue in the carcass have drawn the attention of the productive sector. The nanotechnology can improve the biological effect of drugs, reducing of administered doses and toxic effects. Due to this, toltrazuril-load polymeric nanoparticles based on Eudragit® S100 (NCt) or poly-ε-caprolactone (LNCt) were developed to prevent coccidiosis in broilers. Nanoformulations were produced and showed homogeneous particle diameter distribution in the nanometer range (z-average and D (4.3) < 200 nm), negative zeta potential (<−8.93 mV), drug content ~100%, and encapsulation efficiency >90%. Cell viability assays using avian fibroblasts showed that LNCt presented no relevant toxicity up to 72 h. LNCt was then prophylactically administrated to chicken followed by challenge with Eimeria oocysts. The evaluation of the small intestine and cecum showed that the treatment with LNCt (3.5 mg/kg/day) in drinking water reduced the lesion scores and oocysts excretion, similar to the reference medicine containing toltrazuril (Baycox®, 7 mg/kg/day). The current study shows the potential protective use of nanoencapsulating anticoccidial drugs as a promising approach for the control of coccidiosis in poultry.

Surface-functionalized curcumin-loaded polymeric nanocapsules could block apomorphine-induced behavioral changes in rats

BACKGROUND

Surface functionalization enhances the properties and characteristics of polymeric nanocapsules (NCs) mainly due to the surface charge, surfactants, and polymer coating type. Curcumin (CUR) is a bioactive compound with several proven pharmacological properties and low bioavailability. This study aimed to develop anionic (poly-ɛ-caprolactone; PCL) and cationic (Eudragit^® RS100 (EUD)) NCs prepared with sorbitan monostearate (Span 60^®) or sorbitan monooleate (Span 80^®), coated with d-α-tocopherol polyethylene glycol 1000 succinate (TPGS) and optimized using 2³ factorial analysis. Subsequently, the biological activity was evaluated.

METHODS

A two-level, three-factor design (polymer, Span type, and TPGS concentration) was used. The biological effects of CUR-loaded TPGS-coated cationic and anionic NCs were assessed in apomorphine-induced stereotyped behavior in rats.

RESULTS

The type of polymer (anionic or cationic) and Span^® had a factorial influence on the physical and chemical characteristics of NCs according to the changes in TPGS concentrations. Both cationic and anionic CUR-NCs could block apomorphine-induced behavioral changes.

CONCLUSIONS

The CUR-loaded TPGS-coated NCs proved to be a promising brain delivery system.

An Updated Overview of the Emerging Role of Patch and Film-Based Buccal Delivery Systems

Buccal mucosal membrane offers an attractive drug-delivery route to enhance both systemic and local therapy. This review discusses the benefits and drawbacks of buccal drug delivery, anatomical and physiological aspects of oral mucosa, and various in vitro techniques frequently used for examining buccal drug-delivery systems. The role of mucoadhesive polymers, penetration enhancers, and enzyme inhibitors to circumvent the formulation challenges particularly due to salivary renovation cycle, masticatory effect, and limited absorption area are summarized. Biocompatible mucoadhesive films and patches are favored dosage forms for buccal administration because of flexibility, comfort, lightness, acceptability, capacity to withstand mechanical stress, and customized size. Preparation methods, scale-up process and manufacturing of buccal films are briefed. Ongoing and completed clinical trials of buccal film formulations designed for systemic delivery are tabulated. Polymeric or lipid nanocarriers incorporated in buccal film to resolve potential formulation and drug-delivery issues are reviewed. Vaccine-enabled buccal films have the potential ability to produce both antibodies mediated and cell mediated immunity. Advent of novel 3D printing technologies with built-in flexibility would allow multiple drug combinations as well as compartmentalization to separate incompatible drugs. Exploring new functional excipients with potential capacity for permeation enhancement of particularly large-molecular-weight hydrophilic drugs and unstable proteins, oligonucleotides are the need of the hour for rapid advancement in the exciting field of buccal drug delivery.

Innovative hydrogel containing polymeric nanocapsules loaded with phloretin: Enhanced skin penetration and adhesion

Dermatological applications of phloretin are restricted by its poor aqueous solubility. Nanotechnology has been proposed as strategy to increase the apparent drug solubility in aqueous media. This study aimed to develop, characterize, and evaluate the antitumoral effects and safety of polymeric nanocapsules containing phloretin (NCPhl). Further, to incorporate NC-Phl in an innovative semi-solid formulation (HG-NCPhl) to evaluate its performance using porcine skin model. NC-Phl was prepared and the effects in MRC5, HACAT, and SK-mel28 cells were evaluated. Hydrogels were prepared with Lecigel ® and characterized for their nanotechnological properties, adhesion (in vitro washability), and penetration/permeation studies in porcine skin. NC-Phl had a cytotoxic effect against Sk-Mel-28 cells and the population doubling time was increased upon treatment with NC-Phl for longer culture periods; notably when cells were treated for 72 h and then followed for 7 days after the treatment was removed (p < 0.05). HG-NC-Phl was considered adhesive and had a higher capacity to penetrate all skin layers compared with HG-Phl (p < 0.05). The innovative hydrogel HGNC-Phl promoted a drug-reservoir in the stratum corneum and higher penetration of the flavonoid into the epidermis. Therefore, this approach can be considered as a platform to establish versatile dermatological solutions for both cosmeceutics and melanoma therapy.

Curcumin micelles entrapped in eudragit S-100 matrix: a synergistic strategy for enhanced oral delivery

Background:

Therapeutic activities of curcumin (CUR) via oral administration are hampered by the lack of bioavailability due to its poor water solubility and rapid degradation in GI tract.

Materials & methods:

This preliminary study developed CUR micelle-eudragit S100 (EUD) dry powder (CM-EDP) spray-dried formulations. Poloxamer 407 was used as a micelle-forming agent and EUD as an entrapping matrix for protection over hydrolysis and enzymes in the GI tract.

Results:

The morphology of CM-EDP showed agglomeration with cratering on the surface of particles. Differential thermal analysis and x-ray diffractometry data exhibited evidence that CUR was converted into amorphous solid. An increased concentration of micelle-forming and dispersion matrix polymers resulted in a high fraction of drug being converted into the amorphous state. A significant increase in dissolution by 7–10 times was achieved compared with that of raw CUR.

Conclusion:

The present study disclosed the CM-EDP potency for future development of CUR oral formulation.

Curcumin (CUR) is a natural compound that shows several pharmacological activities, including anti-inflammatory and potential actions against Parkinson’s and Alzheimer’s. However, several drawbacks need to be addressed its application as a therapeutic agent via oral administration. These drawbacks include its poor water solubility and rapid degradation in the GI tract. The present study developed CUR micelle-eudragit S100 (EUD) dry powder formulation involving poloxamer 407 as solubilizing agent and EUD as entrapping matrix for protection in acidic environments and the enzymes in the GI tract. The final product is in the form of dry powder, which showed potency in enhancing CUR absorption following oral administration.

3-O-Methylquercetin from Achyrocline satureioides-cytotoxic activity against A375-derived human melanoma cell lines and its incorporation into cyclodextrins-hydrogels for topical administration

3-O-Methylquercetin (3OMQ), a natural 3-O-methylflavonoid, was isolated from Achyrocline satureioides and purified using the high-performance counter current chromatography (HPCCC) on a semi-preparative scale. High-purity 3OMQ (98%) was obtained with excellent recovery (81.8% (w/w)) and good yield (190 mg/100 g of plant). Isolated 3OMQ was evaluated against the A375 human amelanotic melanoma cancer cell line and A375-derived with different degrees of aggressiveness (A375-A7, A375-G10, and A375-PCDNA3). The results showed that 3OMQ reduced the cell viability of all strains, demonstrating time- and dose-dependent responses. 3OMQ was used to obtain hydrogels for the topical treatment of melanoma. Thus, 3OMQ was incorporated into hypromellose hydrogels with/without different cyclodextrins (CDs). The 3OMQ formulations showed permeation/retention in all skin layers, namely stratum corneum, epidermis, and dermis. A significant amount of 3OMQ was found in the replication site of the melanoma cells (epidermis and dermis). Altogether, these results demonstrate that 3OMQ can be isolated from Achyrocline satureioides by HPCCC on a semi-preparative scale and exhibit cytotoxic activity against melanoma cells. Its incorporation into an HPMC hydrogel containing HP-β-CD yielded a formulation with excellent technological and biopharmaceutical characteristics for evaluating the topical management of melanoma.

Intranasal administration of budesonide-loaded nanocapsule microagglomerates as an innovative strategy for asthma treatment

The co-existence with rhinitis limits the control of asthma. Compared with oral H₁ receptor antagonists, intranasal corticosteroids have been demonstrated to provide greater relief of all symptoms of rhinitis and are recommended as first-line treatment for allergic rhinitis. Intrinsic limitations of nasal delivery, such as the presence of the protective mucous layer, the relentless mucociliary clearance, and the consequent reduced residence time of the formulation in the nasal cavity, limit budesonide efficacy to the treatment of local nasal symptoms. To overcome these limitations and to enable the treatment of asthma via nasal administration, we developed a budesonide-loaded lipid-core nanocapsule (BudNC) microagglomerate powder by spray-drying using a one-step innovative approach. BudNC was obtained, as a white powder, using L-leucine as adjuvant with 75 ± 6% yield. The powder showed a bimodal size distribution curve by laser diffraction with a principal peak just above 3 μm and a second one around 0.45 μm and a drug content determined by HPLC of 8.7 mg of budesonide per gram. In vivo after nasal administration, BudNC showed an improved efficacy in terms of reduction of immune cell influx; production of eotaxin-1, the main inflammatory chemokine; and arrest of airways remodeling when compared with a commercial budesonide product in both short- and long-term asthma models. In addition, data showed that the results in the long-term asthma model were more compelling than the results obtained in the short-term model. Graphical abstract.

Characterisation of the Interaction among Oil-In-Water Nanocapsules and Mucin

Mucins are glycoproteins present in all mucosal surfaces and in secretions such as saliva. Mucins are involved in the mucoadhesion of nanodevices carrying bioactive molecules to their target sites in vivo. Oil-in-water nanocapsules (NCs) have been synthesised for carrying N,N'-(di-m-methylphenyl)urea (DMTU), a quorum-sensing inhibitor, to the oral cavity. DMTU-loaded NCs constitute an alternative for the treatment of plaque (bacterial biofilm). In this work, the stability of the NCs after their interaction with mucin is analysed. Mucin type III from Sigma-Aldrich has been used as the mucin model. Mucin and NCs were characterised by the multi-detection asymmetrical flow field-flow fractionation technique (AF4). Dynamic light scattering (DLS) and ζ-potential analyses were carried out to characterise the interaction between mucin and NCs. According to the results, loading DMTU changes the conformation of the NC. It was also found that the synergistic interaction between mucin and NCs was favoured within a specific range of the mucin:NC ratio within the first 24 h. Studies on the release of DMTU in vitro and the microbial activity of such NCs are ongoing in our lab.

Microflow Nanoprecipitation of Positively Charged Gastroresistant Polymer Nanoparticles of Eudragit® RS100: A Study of Fluid Dynamics and Chemical Parameters

The objective of the present work was to produce gastroresistant Eudragit^® RS100 nanoparticles by a reproducible synthesis approach that ensured mono-disperse nanoparticles under the size of 100 nm. Batch and micromixing nanoprecipitation approaches were selected to produce the demanded nanoparticles, identifying the critical parameters affecting the synthesis process. To shed some light on the formulation of the targeted nanoparticles, the effects of particle size and homogeneity of fluid dynamics, and physicochemical parameters such as polymer concentration, type of solvent, ratio of solvent to antisolvent, and total flow rate were studied. The physicochemical characteristics of resulting nanoparticles were studied applying dynamic light scattering (DLS) particle size analysis and electron microscopy imaging. Nanoparticles produced using a micromixer demonstrated a narrower and more homogenous distribution than the ones obtained under similar conditions in conventional batch reactors. Besides, fluid dynamics ensured that the best mixing conditions were achieved at the highest flow rate. It was concluded that nucleation and growth events must also be considered to avoid uncontrolled nanoparticle growth and evolution at the collection vial. Further, rifampicin-encapsulated nanoparticles were prepared using both approaches, demonstrating that the micromixing-assisted approach provided an excellent control of the particle size and polydispersity index. Not only the micromixing-assisted nanoprecipitation promoted a remarkable control in the nanoparticle formulation, but also it enhanced drug encapsulation efficiency and loading, as well as productivity. To the best of our knowledge, this was the very first time that drug-loaded Eudragit^® RS100 nanoparticles (NPs) were produced in a continuous fashion under 100 nm (16.5 ± 4.3 nm) using microreactor technology. Furthermore, we performed a detailed analysis of the influence of various fluid dynamics and physicochemical parameters on the size and uniformity of the resulting nanoparticles. According to these findings, the proposed methodology can be a useful approach to synthesize a myriad of nanoparticles of alternative polymers.

Cubic Microcontainers Improve In Situ Colonic Mucoadhesion and Absorption of Amoxicillin in Rats

An increased interest in colonic drug delivery has led to a higher focus on the design of delivery devices targeting this part of the gastrointestinal tract. Microcontainers have previously facilitated an increase in oral bioavailability of drugs. The surface texture and shape of microcontainers have proven to influence the mucoadhesion ex vivo. In the present work, these findings were further investigated using an in situ closed-loop perfusion technique in the rat colon, which allowed for simultaneous evaluation of mucoadhesion of the microcontainers as well as drug absorption. Cylindrical, triangular and cubic microcontainers, with the same exterior surface area, were evaluated based on in vitro release, in situ mucoadhesion and in situ absorption of amoxicillin. Additionally, the mucoadhesion of empty cylindrical microcontainers with and without pillars on the top surface was investigated. From the microscopy analysis of the colon sections after the in situ study, it was evident that a significantly higher percentage of cubic microcontainers than cylindrical microcontainers adhered to the intestinal mucus. Furthermore, the absorption rate constants and blood samples indicated that amoxicillin in cubic microcontainers was absorbed more readily than when cylindrical or triangular microcontainers were dosed. This could be due to a higher degree of mucoadhesion for these particular microcontainers.

Effects of Surface Characteristics of Polymeric Nanocapsules on the Pharmacokinetics and Efficacy of Antimalarial Quinine

INTRODUCTION

The surface charge of nanoparticles, such as nanospheres (NS) and nanocapsules (NC), has been studied with the purpose of improving the in vivo performance of drugs. The aim of this study was to develop, characterize, and evaluate the in vitro antimalarial efficacy of NCP80 and NSP80 (polysorbate coated) or NCEUD and NSEUD (prepared with Eudragit RS 100) loading quinine (QN).

METHODS

Formulations were prepared by the nanoprecipitation method, followed by wide physicochemical characterization. Antimalarial activity in Plasmodium berghei-infected mice and populational pharmacokinetics (PopPK) in rats were evaluated.

RESULTS

The formulations showed a nanometric range (between 138 ± 3.8 to 201 ± 23.0 nm), zeta potential (mV) of -33.1 ± 0.7 (NCP80), -30.5 ± 1 (UNCP80), -25.5 ± 1 (NSP80), -20 ± 0.3 (UNSP80), 4.61 ± 1 (NCEUD), 14.1 ± 0.9 (UNCEUD), 2.86 ± 0.3 (NSEUD) and 2.84 ± 0.6 (UNSEUD), content close to 100%, and good QN protection against UVA light. There was a twofold increase in the penetration of QN into infected erythrocytes with NC compared to that with NS. There was a significant increase in t1/2 for all NC evaluated compared to that of Free-QN, due to changes in Vdss. PopPK analysis showed that NCP80 acted as a covariate to Q (intercompartmental clearance) and V2 (volume of distribution in the peripheral compartment). For NCEUD, V1 and Q were modified after QN nanoencapsulation. Regarding in vivo efficacy, NCEUD increased the survival of mice unlike Free-QN.

CONCLUSION

Cationic nanocapsules modified the pharmacology of QN, presenting a potential alternative for malaria treatment.

Assessment of unloaded polymeric nanocapsules with different coatings in female rats: Influence on toxicological and behavioral parameters

The unloaded polymeric nanocapsules (NCs) present incredible characteristics as drug carriers. However, the toxicity caused by NCs with different coatings is still a challenge for contemporary toxicology. Allied to this, preclinical studies are performed in males, disregarding possible gender-dependent toxicity. Thus, the aim of present study was to evaluate the influence of different NCs coatings on toxicological and behavioral parameters in female rats. The physicochemical characterization of NCs with different surface coatings: NC1 (Polysorbate 80), NC2 (PEG), NC3 (Eudragit®RS 100) and NC4 (Chitosan) were performed. Female rats were treated with saline, NC1, NC2, NC3 or NC4 daily for 14 days, p.o. After 24 h of last treatment, animals were submitted to behavioral tests. Only after behavioral tests, female rats were euthanized, organs were removed and weighted. After, histopathological, biochemical and oxidative stress analysis were performed. All NCs-coatings did not cause alterations in behavioral tests. For markers of hepatic, renal damage and lipid profile, the different coatings showed a low toxicity. NCs did not alter weight of organs and histopathological analysis. Also, all NCs-coatings did not modify redox balance in organs studied, only NC2 induced a increase of FRAP levels in intestine. This study demonstrated that the different NCs-coatings did not cause behavioral changes and showed a low toxicity in female rats.