Pushing the limit: masticatory stress and adaptive plasticity in mammalian craniomandibular joints

Ontogenetic biomechanics of tufted (Sapajus) and untufted (Cebus) capuchin mandibles

OBJECTIVES

Cortical bone geometry is commonly used to investigate biomechanical properties of primate mandibles. However, the ontogeny of these properties is less understood. Here we investigate changes in cortical bone cross-sectional properties throughout capuchin ontogeny and compare captive versus wild, semi-provisioned groups. Tufted capuchins (Sapajus spp.) are known to consume relatively hard/tough foods, while untufted capuchins (Cebus spp.) exploit less mechanically challenging foods. Previous research indicates dietary differences are present early in development and adult Sapajus mandibles can resist higher bending/shear/torsional loads.

MATERIALS AND METHODS

This study utilized microCT scans of 22 Cebus and 45 Sapajus from early infancy to adulthood from three sample populations: one captive Cebus, one captive Sapajus, and one semi-provisioned, free-ranging Sapajus. Mandibular cross-sectional properties were calculated at the symphysis, P3, and M1. If the tooth had not erupted, its position within the crypt was used. A series of one-way ANOVAs were performed to assess differences between and within the sample populations.

RESULTS

Mandible robusticity increases across ontogeny for all three sample populations. Sapajus were better able to withstand bending and torsional loading even early in ontogeny, but no difference in shear resistance was found. Semi-provisioned, free-ranging Sapajus tend to show increased abilities to resist bending and torsional loading but not shear loading compared to captive Sapajus.

DISCUSSION

This study helps advance our understanding of the primate masticatory system development and opens the door for further studies into adaptive plasticity in shaping the masticatory apparatus of capuchins and differences in captive versus free-ranging sample populations.

Ontogenetic changes in jaw leverage and skull shape in tufted and untufted capuchins

The ontogeny of feeding is characterized by shifting functional demands concurrent with changes in craniofacial anatomy; relationships between these factors will look different in primates with disparate feeding behaviors during development. This study examines the ontogeny of skull morphology and jaw leverage in tufted (Sapajus) and untufted (Cebus) capuchin monkeys. Unlike Cebus, Sapajus have a mechanically challenging diet and behavioral observations of juvenile Sapajus suggest these foods are exploited early in development. Landmarks were placed on three-dimensional surface models of an ontogenetic series of Sapajus and Cebus skulls (n = 53) and used to generate shape data and jaw-leverage estimates across the tooth row for three jaw-closing muscles (temporalis, masseter, medial pterygoid) as well as a weighted combined estimate. Using geometric morphometric methods, we found that skull shape diverges early and shape is significantly different between Sapajus and Cebus throughout ontogeny. Additionally, jaw leverage varies with age and position on the tooth row and is greater in Sapajus compared to Cebus when calculated at the permanent dentition. We used two-block partial least squares analyses to identify covariance between skull shape and each of our jaw muscle leverage estimates. Sapajus, but not Cebus, has significant covariance between all leverage estimates at the anterior dentition. Our findings show that Sapajus and Cebus exhibit distinct craniofacial morphologies early in ontogeny and strong covariance between leverage estimates and craniofacial shape in Sapajus. These results are consistent with prior behavioral and comparative work suggesting these differences are a function of selection for exploiting mechanically challenging foods in Sapajus, and further emphasize that these differences appear quite early in ontogeny. This research builds on prior work that has highlighted the importance of understanding ontogeny for interpreting adult morphology.

Normal variation of clinical mobility of the mandibular symphysis in cats

Introduction

The primary objective of this retrospective study was to document the normal variation of clinical mobility of the mandibular symphysis in cats and possible associations with bodyweight, age, sex, sexual status, breed and skull morphology. Secondarily, the radiographic appearance of the mandibular symphysis and possible associations with the analyzed data were evaluated.

Materials and methods

Two hundred and sixteen cats of 15 different breeds that underwent maxillofacial, oral and dental procedures from April 2015 to December 2021 were included. Clinical mobility was evaluated under general anesthesia using a 0 to 3 scale in lateromedial (LM) and dorsoventral (DV) directions. The symphysis was radiographically classified on the occlusal radiographic view of the rostral mandibles as fused or open, and with parallel or divergent margins.

Results

Bodyweight ranged from 2.2 to 12.5 kg (median 4.0 kg), age from 4 months to 17 years and 4 months (median 6 years and 4 months). At the first evaluation DV symphyseal mobility was 0 in 177 cases (82%), 1 in 32 cases (14.8%) and 2 in 7 cases (3.2%), LM mobility was 0 in 61 cases (28.3%), 1 in 110 cases (50.9%) and 2 in 45 cases (20.8%). 81.1% of the radiographs were included in the statistical analysis. Three symphyses (1.6%) were classified as fused and 190 (98.4%) as open, 129 (68.8%) having divergent margins and 61 (31.6%) parallel. One hundred and forty-eight cases (76.7%) did not show the presence of odontoclastic replacement resorption on the canine teeth (TR subgroup 1), 23 (11.9%) showed stage ≤3 lesions (TR subgroup 2) and 22 (11.4%) stage 4 lesions (TR subgroup 3). Logistic regression models exploring factors that affected DV and LM mobility were statistically significant (p < 0.0001; p < 0.0001) with an increase in LM mobility predicting an increase in DV mobility, and vice versa. An increase in DV mobility was associated with an increase in age and in having resorptive lesions. A decrease in LM symphyseal mobility was associated with being brachycephalic.

Conclusion

The great majority of cases showed some degree of LM symphyseal mobility, and 18% showed DV mobility. Symphyseal bony fusion is rare but possible.

Normal variation of clinical mobility of the mandibular symphysis in dogs

Introduction

The primary objective of this retrospective study was to document the normal variation of clinical mobility of the mandibular symphysis in dogs, and evaluate possible associations with breed, bodyweight, age, sex, and skull morphology. Secondarily, the radiographic appearance of the mandibular symphysis and possible associations with the analyzed data were also evaluated.

Methods

Medical records of dogs that underwent anesthetic procedures for maxillofacial, oral and dental evaluation from April 2015 to December 2021 were included.

Results

567 dogs of 95 different breeds were included, with a total of 695 evaluations. Body weight ranged from 0.8 kg to 79 kg (median 14.4 kg) and age from 3 months to 16 years and 4 months (median 6 years and 9 months). Clinical mobility was evaluated under general anesthesia using a 0 to 3 scale, in lateromedial (LM) and dorsoventral (DV) directions. The symphysis was radiographically classified as being fused or open. The open symphyses were further radiographically divided in having parallel or divergent margins. At the time of the first evaluation DV mobility was 0 in 551 cases (97.2%) and 1 in 16 cases (2.8%). LM mobility was 0 in 401 cases (70.7%), 1 in 148 cases (26.1%) and 2 in 18 cases (3.2%). There was not a significant change in mobility over time for cases examined more than once (P= 0.76). All cases had an intraoral radiographic examination. 83.8% of the radiographs were included in the statistical analysis. Two symphyses (0.4%) were classified as fused and 473 (99.6%) as open, 355 (74.7%) having divergent margins and 118 (24.8%) parallel margins. Logistic regression models exploring factors that affected DV and LM mobility were statistically significant (P < 0.0001; P < 0.0001), with an increase in LM mobility predicting an increase in DV mobility, and vice versa. An increase in age and in bodyweight was associated with a decrease in mobility. There was no statistical difference in clinical mobility across specific breeds or sexes. Increased probability of a divergent symphysis and increased DV mobility was found to be associated with a brachycephalic conformation. The increase in LM mobility was comparatively higher in small brachycephalic breeds compared with larger brachycephalic breed.

Discussion

The majority of the cases showed little to no mobility of the mandibular symphysis and radiographically bony fusion can be rarely seen.

Is the distribution of cortical bone in the mandibular corpus and symphysis linked to loading environment in modern humans? A systematic review

OBJECTIVE

The human mandible is a unique bone with specific external and internal morphological characteristics, influenced by a complex and challenging loading environment. Mandibular cortical thickness distribution in cross-sections is reported to be related to facial divergence patterns, cultural and dietary habits and more generally, specific loading environment. This review hypothesises that a process of environmental mechanical sensitivity is involved in the distribution of cortical bone in the mandibular corpus and symphysis in modern humans, and that loading regimes can influence this distribution pattern. Based on a review of the recent literature, this study aims to answer the following question: "Is the distribution of cortical bone in the mandibular corpus and symphysis linked to the loading environment in modern humans?"

DESIGN

A systematic review was undertaken using the PubMed/Medline, Scopus and Cochrane Library databases for publications from 1984 to 2022 investigating the relationship between cortical bone distribution in the mandibular corpus and the loading environment. A subgroup meta-analysis was performed to determine the overall effect of facial divergence on cortical thickness.

RESULTS

From a total of 2791 studies, 20 fulfilled the inclusion criteria. The meta-analyses were performed in eight studies using a randomised model, finding a significant overall effect of facial divergence on cortical thickness in posterior areas of the mandible (p < 0.01).

CONCLUSIONS

Within the limitations of this review, specific loading regimes and their consequent variables (diet, culture, facial divergence) were linked to cortical thickness distribution. Sex was found to be unrelated to cortical thickness pattern.

Joint mobility as a bridge between form and function

Joints enable nearly all vertebrate animal motion, from feeding to locomotion. However, despite well over a century of arthrological research, we still understand very little about how the structure of joints relates to the kinematics they exhibit in life. This Commentary discusses the value of joint mobility as a lens through which to study articular form and function. By independently exploring form-mobility and mobility-function relationships and integrating the insights gained, we can develop a deep understanding of the strength and causality of articular form-function relationships. In turn, we will better illuminate the basics of 'how joints work' and be well positioned to tackle comparative investigations of the diverse repertoire of vertebrate animal motion.

Wnt/β-catenin signaling pathway is activated in the progress of mandibular condylar cartilage degeneration and subchondral bone loss induced by overloaded functional orthopedic force (OFOF)

Objective

To explore the role of Wnt/β-catenin signaling pathway in the pathogenesis and progression of temporomandibular joint osteoarthritis (TMJ OA) caused by overloaded force.

Materials and methods

We generated a rat model of forward mandibular extension device to induce TMJ OA by overloaded force. Condylar cartilage samples were collected at 2wk, 4wk, and 8wk after appliances were installed. Changes of the condylar cartilage and subchondral bone were evaluated by hematoxylin and eosin (HE), Safranin O and Fast Green staining (SO&FG), micro-CT, tartrate resistant acid phosphatase (TRAP) staining. The expression levels of β-catenin, COL-2, MMP3 and sclerostin (SOST) were detected by immunohistochemistry (IHC) and PCR.

Results

HE, SO&FG, micro-CT, OARSI and Mankin scores showed that the condyle cartilage layer was significantly thinner and proteoglycan loss in the overloded group. TRAP staining exhibited that the number of positive osteoclasts increased and OPG level decreased in the overload group. IHC, PCR showed that the expression of COL2 and SOST decreased, while MMP3 and β-catenin increased in the overload group.

Conclusion

Wnt/β-catenin signaling pathway is activated in the progress of mandibular condylar cartilage degeneration and subchondral bone loss induced by overloaded functional orthopedic force (OFOF)

Mechanobiology and Adaptive Plasticity Theory as a Potential Confounding Factor in Predicting Musculoskeletal Foot Function

There are many theoretical models that attempt to accurately and consistently link kinematic and kinetic information to musculoskeletal pain and deformity of the foot. Biomechanical theory of the foot lacks a consensual model: clinicians are enticed to draw from numerous paradigms, each having different levels of supportive evidence and contrasting methods of evaluation, in order to engage in clinical deduction and treatment planning. Contriving to find a link between form and function lies at the heart of most of these competing theories and the physical nature of the discipline has prompted an engineering approach. Physics is of great importance in biology and helps us to model the forces that the foot has to deal with in order for it to work effectively. However, the tissues of the body have complex processes that are in place to protect them and they are variable between individuals. Research is uncovering why these differences exist and how these processes are governed. The emerging explanations for adaptability of foot structure and musculoskeletal homeostasis offer new insights into how clinical variation in outcomes and treatment effects might arise. These biological processes underlie how variation in the performance and use of common traits, even within apparently similar subgroups, make anatomical distinction less meaningful and are likely to undermine the justification of a "foot type." Furthermore, mechanobiology introduces a probabilistic element to morphology based on genetic and epigenetic factors.

Mechanical properties of food and masticatory behavior in llamas, Llama glama

Mammals typically process food items more extensively in their oral cavities than do other vertebrates. Dental morphology, jaw-muscle activity patterns, mandibular movements, and tongue manipulation work to facilitate oral fragmentation of dietary items. While processing mechanically challenging foods, mammals modulate mandibular movements and bite forces via recruitment of greater jaw-adductor muscle forces and protracted biting or chewing. Because jaw-loading patterns are influenced by magnitude; frequency; and duration of muscular, bite, and reaction forces during routine feeding behaviors, relatively larger jaws are thought to be more characteristic of mammals that experience higher masticatory loads due to the processing of mechanically challenging foods. The ease of food fracture during post-canine biting and chewing is mainly determined by food stiffness and toughness. Such foods have been associated with increased loading magnitude and/or greater amounts of cyclical loading (i.e., chewing duration). Dietary properties are thought to modulate cyclical loading through changes in chewing frequency and chewing investment. On the other hand, chewing frequency has been found to be independent of dietary properties in rabbits and primates; however, little evidence exists regarding the influence of dietary properties on these parameters in a broader range of mammals. Here, we assessed chewing behavior in seven adult llamas (Llama glama) processing foods with a wide range of mechanical properties (grain, hay, carrots, and dried corn). Each subject was filmed at 60 frames/s, with video slowed for frame-by-frame computer analysis to obtain length of feeding bout and number of chewing cycles for each food type. These parameters were used to calculate chewing frequency (chews/s), chewing investment (chews/g), and chewing duration (s/g). Chewing frequency was not significantly related to mechanical properties of food, but chewing investment and chewing duration were significantly related to dietary stiffness and toughness. Therefore, cyclical loading is positively influenced by stiff and tough foods. This suggests that variation in jaw morphology in extinct and extant mammals is positively related to dietary stiffness and toughness, which requires greater chewing investment and increased chewing duration.

Lagomorpha as a Model Morphological System

Due to their global distribution, invasive history, and unique characteristics, European rabbits are recognizable almost anywhere on our planet. Although they are members of a much larger group of living and extinct mammals [Mammalia, Lagomorpha (rabbits, hares, and pikas)], the group is often characterized by several well-known genera (e.g., Oryctolagus, Sylvilagus, Lepus, and Ochotona). This representation does not capture the extraordinary diversity of behavior and form found throughout the order. Model organisms are commonly used as exemplars for biological research, but there are a limited number of model clades or lineages that have been used to study evolutionary morphology in a more explicitly comparative way. We present this review paper to show that lagomorphs are a strong system in which to study macro- and micro-scale patterns of morphological change within a clade that offers underappreciated levels of diversity. To this end, we offer a summary of the status of relevant aspects of lagomorph biology.

Overloading stress-induced progressive degeneration and self-repair in condylar cartilage

Overloading stress-induced condylar cartilage degeneration acts as the main pathologic change in temporomandibular joint osteoarthritis (TMJ-OA). However, the progression of degeneration and the ability for self-repair remain poorly understood. Here, we explored the progression of cartilage degeneration by dividing pathological stages using a steady mouth-opening mouse model. Then, we observed changes of cartilage by removing the loading at different stages to test the potential self-repair after degeneration induced. Three-dimensional confocal microscopy combined with histology and micro-CT scanning was applied to examine TMJ at different stages of degeneration before and after self-repair. We found the cartilage underwent progressive and thorough degeneration as the overloading stress developed. During the initial adaptation stage, robust proliferation of posteromedial cartilage began at the area of direct loading. Subsequently, widespread chondrocyte apoptosis was found, followed by new chondrocyte proliferation in aggregates with matrix degradation and subchondral bone catabolism. Finally, with cartilage surface damage, the degeneration reached a point where the lesion could not be reversed by self-repair. While the cartilage nearly returned to normal when the interference was removed within 5 days. These results suggested overloading force induces a pathological process of successive degeneration in TMJ cartilage, which can be reversed by self-repair at early stages.

Bone remodeling and cyclical loading in maxillae of New Zealand white rabbits (Oryctolagus cuniculus)

Mammalian feeding behaviors are altered when mechanically challenging (e.g., tough, stiff) foods require large bite forces or prolonged mastication. Bony responses to high bite forces are well-documented for the mammalian skull, but osteogenesis due to cyclical loading, caused by repetitive chewing, is more poorly understood. Previous studies demonstrate that cyclical loading results in greater bone formation in the rabbit masticatory apparatus and in substantial Haversian remodeling in primate postcrania. Here we assess the relationship between cyclical loading and remodeling in the rabbit maxilla. Twenty male New Zealand white rabbits (Oryctolagus cuniculus) were raised on either an overuse or control diet (10 per group) for 48 weeks, beginning at weaning onset. The control group was raised on a diet of rabbit pellets (E = 29 MPa, R = 1031 J/m² ), whereas the overuse group ate rabbit pellets and hay, which has high stiffness (E = 3336 MPa) and toughness (R = 2760 J/m² ) properties. Hay requires greater chewing investment (475 chews/g) and longer chewing durations (568 s/g) than pellets (161 chews/g and 173 s/g), therefore causing cyclical loading of the jaws. Remodeling was measured as osteon population density (OPD), percent Haversian bone (%HAV), and osteon cross-sectional area (On.Ar). The only significant difference found was greater On.Ar in the alveolar region of the maxilla (p < 0.001) in the overuse group. The hypothesis that cyclical loading engenders Haversian remodeling in the developing maxilla is not supported. The continuation of modeling throughout the experimental duration may negate the need for remodeling as newly laid bone tends to be more compliant and resistant to crack propagation.

Biomechanics of the mandible of Macaca mulatta during the power stroke of mastication: Loading, deformation, and strain regimes and the impact of food type

Mandible morphology has yet to yield definitive information on primate diet, probably because of poor understanding of mandibular loading and strain regimes, and overreliance on simple beam models of mandibular mechanics. We used a finite element model of a macaque mandible to test hypotheses about mandibular loading and strain regimes and relate variation in muscle activity during chewing on different foods to variation in strain regimes. The balancing-side corpus is loaded primarily by sagittal shear forces and sagittal bending moments. On the working side, sagittal bending moments, anteroposterior twisting moments, and lateral transverse bending moments all reach similar maxima below the bite point; sagittal shear is the dominant loading regime behind the bite point; and the corpus is twisted such that the mandibular base is inverted. In the symphyseal region, the predominant loading regimes are lateral transverse bending and negative twisting about a mediolateral axis. Compared with grape and dried fruit chewing, nut chewing is associated with larger sagittal and transverse bending moments acting on balancing- and working-side mandibles, larger sagittal shear on the working side, and larger twisting moments about vertical and transverse axes in the symphyseal region. Nut chewing is also associated with higher minimum principal strain magnitudes in the balancing-side posterior ramus; higher sagittal shear strain magnitudes in the working-side buccal alveolar process and the balancing-side oblique line, recessus mandibulae, and endocondylar ridge; and higher transverse shear strains in the symphyseal region, the balancing-side medial prominence, and the balancing-side endocondylar ridge. The largest food-related differences in maximum principal and transverse shear strain magnitudes are in the transverse tori and in the balancing-side medial prominence, extramolar sulcus, oblique line, and endocondylar ridge. Food effects on the strain regime are most salient in areas not traditionally investigated, suggesting that studies seeking dietary effects on mandible morphology might be looking in the wrong places.

Clarifying relationships between cranial form and function in tapirs, with implications for the dietary ecology of early hominins

Paleontologists and paleoanthropologists have long debated relationships between cranial morphology and diet in a broad diversity of organisms. While the presence of larger temporalis muscle attachment area (via the presence of sagittal crests) in carnivorans is correlated with durophagy (i.e. hard-object feeding), many primates with similar morphologies consume an array of tough and hard foods—complicating dietary inferences of early hominins. We posit that tapirs, large herbivorous mammals showing variable sagittal crest development across species, are ideal models for examining correlations between textural properties of food and sagittal crest morphology. Here, we integrate dietary data, dental microwear texture analysis, and finite element analysis to clarify the functional significance of the sagittal crest in tapirs. Most notably, pronounced sagittal crests are negatively correlated with hard-object feeding in extant, and several extinct, tapirs and can actually increase stress and strain energy. Collectively, these data suggest that musculature associated with pronounced sagittal crests—and accompanied increases in muscle volume—assists with the processing of tough food items in tapirs and may yield similar benefits in other mammals including early hominins.

Reinforcement of the larynx and trachea in echolocating and non-echolocating bats

The synchronization of flight mechanics with respiration and echolocation call emission by bats, while economizing these behaviors, presumably puts compressive loads on the cartilaginous rings that hold open the respiratory tract. Previous work has shown that during postnatal development of Artibeus jamaicensis (Phyllostomidae), the onset of adult echolocation call emission rate coincides with calcification of the larynx, and the development of flight coincides with tracheal ring calcification. In the present study, I assessed the level of reinforcement of the respiratory system in 13 bat species representing six families that use stereotypical modes of echolocation (i.e. duty cycle % and intensity). Using computed tomography, the degree of mineralization or ossification of the tracheal rings, cricoid, thyroid and arytenoid cartilages were determined for non-echolocators, tongue clicking, low-duty cycle low-intensity, low-duty cycle high-intensity, and high-duty cycle high-intensity echolocating bats. While all bats had evidence of cervical tracheal ring mineralization, about half the species had evidence of thoracic tracheal ring calcification. Larger bats (Phyllostomus hastatus and Pterpodidae sp.) exhibited more extensive tracheal ring mineralization, suggesting an underlying cause independent of laryngeal echolocation. Within most of the laryngeally echolocating species, the degree of mineralization or ossification of the larynx was dependent on the mode of echolocation system used. Low-duty cycle low-intensity bats had extensively mineralized cricoids, and zero to very minor mineralization of the thyroids and arytenoids. Low-duty cycle high-intensity bats had extensively mineralized cricoids, and patches of thyroid and arytenoid mineralization. The high-duty cycle high-intensity rhinolophids and hipposiderid had extensively ossified cricoids, large patches of ossification on the thyroids, and heavily ossified arytenoids. The high-duty cycle high-intensity echolocator, Pteronotus parnellii, had mineralization patterns and laryngeal morphology very similar to the other low-duty cycle high-intensity mormoopid species, perhaps suggesting relatively recent evolution of high-duty cycle echolocation in P. parnellii compared with the Old World high-duty cycle echolocators (Rhinolophidae and Hipposideridae). All laryngeal echolocators exhibited mineralized or ossified lateral expansions of the cricoid for articulation with the inferior horn of the thyroid, these were most prominent in the high-duty cycle high-intensity rhinolophids and hipposiderid, and least prominent in the low-duty cycle low-intensity echolocators. The non-laryngeal echolocators had extensively ossified cricoid and thyroid cartilages, and no evidence of mineralization/ossification of the arytenoids or lateral expansions of the cricoid. While the non-echolocators had extensive ossification of the larynx, it was inconsistent with that seen in the laryngeal echolocators.

Internal architecture of the mandibular condyle of rabbits is related to dietary resistance during growth

Although there is considerable evidence that bone responds to the loading environment in which it develops, few analyses have examined phenotypic plasticity or bone functional adaptation in the masticatory apparatus. Prior work suggests that masticatory morphology is sensitive to differences in food mechanical properties during development; however, the importance of the timing/duration of loading and variation in naturalistic diets is less clear. Here, we examined microstructural and macrostructural differences in the mandibular condyle in four groups of white rabbits (Oryctolagus cuniculus) raised for a year on diets that varied in mechanical properties and timing of the introduction of mechanically challenging foods, simulating seasonal variation in diet. We employed sliding semilandmarks to locate multiple volumes of interest deep to the mandibular condyle articular surface, and compared bone volume fraction, trabecular thickness and spacing, and condylar size/shape among experimental groups. The results reveal a shared pattern of bony architecture across the articular surface of all treatment groups, while also demonstrating significant among-group differences. Rabbits raised on mechanically challenging diets have significantly increased bone volume fraction relative to controls fed a less challenging diet. The post-weaning timing of the introduction of mechanically challenging foods also influences architectural properties, suggesting that bone plasticity can extend well into adulthood and that bony responses to changes in loading may be rapid. These findings demonstrate that bony architecture of the mandibular condyle in rabbits responds to variation in mechanical loading during an organism's lifetime and has the potential to track dietary variation within and among species.

Histological Development of the Fused Mandibular Symphysis in the Pig

The development of the mandibular symphysis in late fetal and postnatal pigs, Sus scrofa dom. (n = 17), was studied as a model for the early fusing symphysis of anthropoid primates, including humans. The suture-like ligaments occurring in species that retain a mobile symphysis are not present in the pig. Instead, cartilage is the predominant tissue in the mandibular symphysis prior to fusion. In late fetuses the rostrum of the fused Meckel's cartilages forms a minor posterior component of the symphysis whereas the major component is secondary cartilage, developing bilaterally and joined at the midline with mesenchyme. This remnant of Meckel's cartilage likely fuses with the flanking secondary cartilage. The overall composition of pig symphyseal histology in fetal and infant animals varies regionally and individually. Regions where the paired secondary cartilages abut in the midline resemble double growth plates. Chondrogenic growth in width of the symphysis is likely important in early stages, and central proliferation of mesenchyme is the probable source of new chondrocytes. Laterally, the chondrocytes hypertrophy near the bone fronts and are replaced by alveolar bone. Complete synostosis except for a small cartilage remnant had occurred in one 8-week-old postnatal specimen and all older specimens. Surprisingly, however, the initial phase of symphyseal fusion, observed in a 5-week-old postnatal specimen, involved intramembranous ossification of midline mesenchyme rather than endochondral ossification. Subsequently, fusion progresses rapidly at the anterior and labial aspects of the symphysis, leaving only a small postero-lingual cartilage pad that persists for at least several months. Anat Rec, 302:1372-1388, 2019. © 2018 Wiley Periodicals, Inc.

Allometry predicts trabecular bone structural properties in the carnivoran jaw joint

Because overall cranial morphology-biomechanics linkage in carnivorans is significantly influenced by both feeding and non-feeding ecological variables, whole-skull mechanical performance measures may be less sensitive to feeding ecology than regional characteristics within the skull. The temporomandibular joint could be one regional characteristic that is highly sensitive to feeding ecology considering that this joint is used in prey capture, food processing, and experiences compressive loading during mastication. Through 3D model construction, 3D printing, and compression tests, morphological and mechanical performance measures were determined for the temporomandibular joint trabecular bone structure of 40 species representative of the phylogenetic and ecology diversity of Carnivora. Remarkably, the results indicate that relative fill volume, relative structural complexity, elastic modulus, and relative maximum compressive strength of trabecular bone structure are not significantly related to phylogeny or ecology. The results reveal that morphological and mechanical performance attributes of trabecular bone structure are primarily influenced by body size, and that positive centroid size allometry and positive body mass allometry are present for structural complexity. The lack of feeding ecological signal in dorso-ventral compressive loading of temporomandibular joint models indicates that carnivoran temporomandibular joint trabecular structures may not undergo significant differential remodeling as an evolutionary response to different mechanically demanding feeding tasks.

Dietary variation and mechanical properties of articular cartilage in the temporomandibular joint: implications for the role of plasticity in mechanobiology and pathobiology

Due to their nature as tissue composites, skeletal joints pose an additional challenge in terms of evaluating the functional significance of morphological variation in their bony and cartilaginous components in response to altered loading conditions. Arguably, this complexity requires more direct means of investigating joint plasticity and performance than typically employed to analyze macro- and micro-anatomical phenomena. To address a significant gap in our understanding of the plasticity of the mammalian temporomandibular joint (TMJ), we investigated the histology and mechanical properties of condylar articular cartilage in rabbits subjected to long-term variation in diet-induced masticatory stresses, specifically cyclical loading. Three cohorts of male weanlings were raised for six months on different diets until adulthood. Following euthanasia, the TMJ condyles on one side were dissected away, fixed, decalcified, dehydrated, embedded and sectioned. Safranin O staining was employed to identify variation in proteoglycan content, which in turn was used to predict patterns of articular cartilage stiffness in contralateral condylar specimens for each treatment group. Hematoxylin and eosin staining was used to quantify diet-induced changes in chondrocyte hypertrophy and cellularity. Mechanical tests document significant decreases in articular cartilage stiffness corresponding to patterns of extracellular matrix relative protein abundance in rabbits subjected to greater cyclical loading. This indicates that TMJs routinely subjected to higher masticatory stresses due to a challenging diet eventually develop postnatal decreases in the ability to counter compressive loads during postcanine biting and chewing. These findings provide novel information regarding TMJ performance, with broader implications about the costs and benefits of phenotypic plasticity as well as implications for how such biological processes affect connective tissue mechanobiology and pathobiology.

Can skull form predict the shape of the temporomandibular joint? A study using geometric morphometrics on the skulls of wolves and domestic dogs

The temporomandibular joint (TMJ) conducts and restrains masticatory movements between the mammalian cranium and the mandible. Through this functional integration, TMJ morphology in wild mammals is strongly correlated with diet, resulting in a wide range of TMJ variations. However, in artificially selected and closely related domestic dogs, dietary specialisations between breeds can be ruled out as a diversifying factor although they display an enormous variation in TMJ morphology. This raises the question of the origin of this variation. Here we hypothesise that, even in the face of reduced functional demands, TMJ shape in dogs can be predicted by skull form; i.e. that the TMJ is still highly integrated in the dog skull. If true, TMJ variation in the dog would be a plain by-product of the enormous cranial variation in dogs and its genetic causes. We addressed this hypothesis using geometric morphometry on a data set of 214 dog and 60 wolf skulls. We digitized 53 three-dimensional landmarks of the skull and the TMJ on CT-based segmentations and compared (1) the variation between domestic dog and wolf TMJs (via principal component analysis) and (2) the pattern of covariation of skull size, flexion and rostrum length with TMJ shape (via regression of centroid size on shape and partial least squares analyses). We show that the TMJ in domestic dogs is significantly more diverse than in wolves: its shape covaries significantly with skull size, flexion and rostrum proportions in patterns which resemble those observed in primates. Similar patterns in canids, which are carnivorous, and primates, which are mostly frugivorous imply the existence of basic TMJ integration patterns which are independent of dietary adaptations. However, only limited amounts of TMJ variation in dogs can be explained by simple covariation with overall skull geometry. This implies that the final TMJ shape is gained partially independently of the rest of the skull.

An ontogenetic perspective on symphyseal fusion, occlusion and mandibular loading in alpacas (Vicugna pacos)

A primary hypothesis for the evolution of mandibular symphyseal fusion in some mammals is that it functions to resist loads incurred during routine mastication. Anecdotal support for this hypothesis is based on the fact that when the symphysis fuses, it typically does so early during postnatal ontogeny prior to or around the time of weaning. However, little is known about the process of fusion, particularly relative to feeding behaviors and the dynamics of mastication, including occlusion and masticatory loading. In the present study, we investigate the timing and process of symphyseal fusion in alpacas (Vicugna pacos) in the context of maturation of the oral apparatus and oral behavior. We also report on in vivo strains from the symphysis and corpus in young alpacas prior to and following full fusion and M₁ occlusion. Results show that fusion begins rostrally by 1 month and is complete by 6-7 months whereas all deciduous premolars and M₁ come into occlusion by 6 months. Although symphyseal loading patterns are maintained throughout ontogeny, in young alpacas symphyseal strain magnitudes are low compared with adults but corpus strain magnitudes are comparable to those found in adults. Reduced symphyseal loading in young individuals is contrary to what might be predicted given that the symphysis is still fusing. When considered in light of the development of occlusion and rumination, strain magnitudes may be necessarily low and reflect an overall delay in the maturation of masticatory dynamics.

Facing the facts: The Runx2 gene is associated with variation in facial morphology in primates

The phylogenetic and adaptive factors that cause variation in primate facial form-including differences among the major primate clades and variation related to feeding and/or social behavior-are relatively well understood. However, comparatively little is known about the genetic mechanisms that underlie diversity in facial form in primates. Because it is essential for osteoblastic differentiation and skeletal development, the runt-related transcription factor 2 (Runx2) is one gene that may play a role in these genetic mechanisms. Specifically, polymorphisms in the QA ratio (determined by the ratio of the number of polyglutamines to polyalanines in one functional domain of Runx2) have been shown to be correlated with variation in facial length and orientation in other mammal groups. However, to date, the relationship between variation in this gene and variation in facial form in primates has not been explicitly tested. To test the hypothesis that the QA ratio is correlated with facial form in primates, the current study quantified the QA ratio, facial length, and facial angle in a sample of 33 primate species and tested for correlation using phylogenetic generalized least squares. The results indicate that the QA ratio of the Runx2 gene is positively correlated with variation in relative facial length in anthropoid primates. However, no correlation was found in strepsirrhines, and there was no correlation between facial angle and the QA ratio in any groups. These results suggest that, in primates, the QA ratio of the Runx2 gene may play a role in modulating facial size, but not facial orientation. This study therefore provides important clues about the genetic and developmental mechanisms that may underlie variation in facial form in primates.

Effect of mechanical loading on the metabolic activity of cells in the temporomandibular joint: a systematic review

OBJECTIVES

The purpose of this systematic review was to elucidate how different modalities and intensities of mechanical loading affect the metabolic activity of cells within the fibro-cartilage of the temporomandibular joint (TMJ).

MATERIALS AND METHODS

A systematic review was conducted according to PRISMA guidelines using PubMed, Embase, and Web of Science databases. The articles were selected following a priori formulated inclusion criteria (viz., in vivo and in vitro studies, mechanical loading experiments on TMJ, and the response of the TMJ). A total of 254 records were identified. After removal of duplicates, 234 records were screened by assessing eligibility criteria for inclusion. Forty-nine articles were selected for full-text assessment. Of those, 23 were excluded because they presented high risk of bias or were reviews. Twenty-six experimental studies were included in this systematic review: 15 in vivo studies and 11 in vitro ones.

CONCLUSION

The studies showed that dynamic mechanical loading is an important stimulus for mandibular growth and for the homeostasis of TMJ cartilage. When this loading is applied at a low intensity, it prevents breakdown of inflamed cartilage. Yet, frequent overloading at excessive levels induces accelerated cell death and an increased cartilage degradation.

CLINICAL SIGNIFICANCE

Knowledge about the way temporomandibular joint (TMJ) fibrocartilage responds to different types and intensities of mechanical loading is important to improve existing treatment protocols of degenerative joint disease of the TMJ, and also to better understand the regenerative pathway of this particular type of cartilage.

Betwixt and Between: Intracranial Perspective on Zygomatic Arch Plasticity and Function in Mammals

The zygomatic arch is morphologically complex, providing a key interface between the viscerocranium and neurocranium. It also serves as an attachment site for masticatory muscles, thereby linking it to the feeding apparatus. Though morphological variation related to differential loading is well known for many craniomandibular elements, the adaptive osteogenic response of the zygomatic arch remains to be investigated. Here, experimental data are presented that address the naturalistic influence of masticatory loading on the postweaning development of the zygoma and other cranial elements. Given the similarity of bone-strain levels among the zygoma and maxillomandibular elements, a rabbit and pig model were used to test the hypothesis that variation in cortical bone formation and biomineralization along the zygomatic arch and masticatory structures are linked to increased stresses. It was also hypothesized that neurocranial structures would be minimally affected by varying loads. Rabbits and pigs were raised for 48 weeks and 8 weeks, respectively. In both experimental models, CT analyses indicated that elevated masticatory loading did not induce differences in cortical bone thickness of the zygomatic arch, though biomineralization was positively affected. Hypotheses were supported regarding bone formation for maxillomandibular and neurocranial elements. Varying osteogenic responses in the arch suggests that skeletal adaptation, and corresponding variation in performance, may reside differentially at one level of bony architecture. Thus, it is possible that phenotypic diversity in the mammalian zygoma is due more singularly to natural selection (vs. plasticity). These findings underscore the complexity of the zygomatic arch and, more generally, determinants of skull form. Anat Rec, 299:1646-1660, 2016. © 2016 Wiley Periodicals, Inc.

Ontogenetic and functional modularity in the rodent mandible

The material properties of diets consumed by juvenile individuals are known to affect adult morphological outcomes. However, much of the current experimental knowledge regarding dietary effects on masticatory form is derived from studies in which individuals are fed a non-variable diet for the duration of their postweaning growth period. Thus, it remains unclear how intra-individual variation in diet, due to ontogenetic variation in feeding behaviors or seasonal resource fluctuations, affects the resulting adult morphology. Furthermore, the mandible is composed of multiple developmental and functional subunits, and the extent to which growth and plasticity among these modules is correlated may be misestimated by studies that examine non-variable masticatory function in adults only. To address these gaps in our current knowledge, this study raised Sprague Dawley rats (n=42) in four dietary cohorts from weaning to skeletal maturity. Two cohorts were fed a stable ("annual") diet of either solid or powdered pellets. The other two cohorts were fed a variable ("seasonal") diet consisting of solid/powdered pellets for the first half of the study, followed by a shift to the opposite diet. Results of longitudinal morphometric analyses indicate that variation in the mandibular corpus is more prominent at immature ontogenetic stages, likely due to processes of dental eruption and the growth of tooth roots. Furthermore, adult morphology is influenced by both masticatory function and the ontogenetic timing of this function, e.g., the consumption of a mechanically resistant diet. The morphology of the coronoid process was found to separate cohorts on the basis of their early weanling diet, suggesting that the coronoid process/temporalis muscle module may have an early plasticity window related to high growth rates during this life stage. Conversely, the morphology of the angular process was found to be influenced by the consumption of a mechanically resistant diet at any point during the growth period, but with a tendency to reflect the most recent diet. The prolonged plasticity window of the angular process/pterygomasseteric muscle module may be related to delayed ossification and muscular maturation within this module. The research presented here highlights the importance of more naturalistic models of mammalian feeding, and underscores the need for a better understanding of the processes of both morphological and behavioral maturation that follow weaning.

Intracranial and hierarchical perspective on dietary plasticity in mammals

The effect of dietary properties on craniofacial form has been the focus of numerous functional studies, with increasingly more work dedicated to the importance of phenotypic plasticity. As bone is a dynamic tissue, morphological variation related to differential loading is well established for many masticatory structures. However, the adaptive osteogenic response of several cranial sites across multiple levels of bony organization remains to be investigated. Here, rabbits were obtained at weaning and raised for 48 weeks until adulthood in order to address the naturalistic influence of altered loading on the long-term development of masticatory and non-masticatory elements. Longitudinal data from micro-computed tomography (μCT) scans were used to test the hypothesis that variation in cortical bone formation and biomineralization in masticatory structures is linked to increased stresses during oral processing of mechanically challenging foods. It was also hypothesized that similar parameters for neurocranial structures would be minimally affected by varying loads as this area is characterized by low strains during mastication and reduced hard-tissue mechanosensitivity. Hypotheses were supported regarding bone formation for maxillomandibular and neurocranial elements, though biomineralization trends of masticatory structures did not mirror macroscale findings. Varying osteogenic responses in masticatory elements suggest that physiological adaptation, and corresponding variation in skeletal performance, may reside differentially at one level of bony architecture, potentially affecting the accuracy of behavioral and in silico reconstructions. Together, these findings underscore the complexity of bone adaptation and highlight functional and developmental variation in determinants of skull form.

Bone up: craniomandibular development and hard-tissue biomineralization in neonate mice

The presence of regional variation in the osteogenic abilities of cranial bones underscores the fact that the mechanobiology of the mammalian skull is more complex than previously recognized. However, the relationship between patterns of cranial bone formation and biomineralization remains incompletely understood. In four strains of mice, micro-computed tomography was used to measure tissue mineral density during perinatal development in three skull regions (calvarium, basicranium, mandible) noted for variation in loading environment, embryological origin, and ossification mode. Biomineralization levels increased during perinatal ontogeny in the mandible and calvarium, but did not increase in the basicranium. Tissue mineral density levels also varied intracranially, with density in the mandible being highest, in the basicranium intermediate, and in the calvarium lowest. Perinatal increases in, and elevated levels of, mandibular biomineralization appear related to the impending postweaning need to resist elevated masticatory stresses. Similarly, perinatal increases in calvarial biomineralization may be linked to ongoing brain expansion, which is known to stimulate sutural bone formation in this region. The lack of perinatal increase in basicranial biomineralization could be a result of earlier developmental maturity in the cranial base relative to other skull regions due to its role in supporting the brain's mass throughout ontogeny. These results suggest that biomineralization levels and age-related trajectories throughout the skull are influenced by the functional environment and ontogenetic processes affecting each region, e.g., onset of masticatory loads in the mandible, whereas variation in embryology and ossification mode may only have secondary effects on patterns of biomineralization. Knowledge of perinatal variation in tissue mineral density, and of normal cranial bone formation early in development, may benefit clinical therapies aiming to correct developmental defects and traumatic injuries in the skull, and more generally characterize loading environments and skeletal adaptations in mammals by highlighting the need for multi-level analyses for evaluating functional performance of cranial bone.

Shape Variation in the Craniomandibular System and Prevalence of Dental Problems in Domestic Rabbits: A Case Study in Evolutionary Veterinary Science

In contrast to wild lagomorphs, pet rabbits exhibit a noticeably high frequency of dental problems. Although dietary habits are considered as a major factor contributing to acquired malocclusions, the exact causes and interrelationships are still under debate. In this regard, an important aspect that has not been considered thoroughly to date is the effect of diet-induced phenotypic plasticity in skull morphology. Therefore, we conducted a geometric morphometric analysis on skull radiological images of wild and pet rabbits in order to quantify intraspecific variation in craniomandibular morphology. The statistical analyses reveal a significant morphological differentiation of the craniomandibular system between both groups. Furthermore, the analysis of covariance shows that the force-generating modules (cranium and mandible) vary independently from the force-receiving module (hypselodont teeth) in pet rabbits, which is in contrast to their wild relatives. Our findings suggest that the phenotypic changes in domestic rabbits impact mastication performance and, consequently, oral health. An adequate close-to-nature nutrition throughout the whole life and especially beginning early parallel to weaning (phase of increased phenotypic plasticity) is necessary to ensure a normal strain on the teeth by promoting physiological lateral gliding movements and avoiding direct axial loads.

Bone and cartilage changes in rabbit mandibular condyles after 1 injection of botulinum toxin

INTRODUCTION

Temporary paralysis of the masseter muscle caused by botulinum toxin is a common treatment for temporomandibular disorders, bruxism, and muscle hypertrophy. Loss of masseter force is associated with decreased mandibular mineral density. Our objectives were (1) to establish whether bone loss at the mandibular condyle is regionally specific and (2) to ascertain whether the treatment affects the condylar cartilage.

METHODS

Young adult female rabbits received a unilateral masseter injection of botulinum neurotoxin serotype A (BoNT/A, n = 31), saline solution (n = 19), or no injection (n = 3) and were also injected with bromodeoxyuridine (BrdU), a replication marker. The rabbits were killed at 4 or 12 weeks after treatment. The condyles were processed for paraffin histology. Cortical thickness, cartilage thickness, and trabecular bone areal density were measured, and replicating cells were counted after BrdU reaction.

RESULTS

The BoNT/A rabbits exhibited a high frequency of defects in the condylar bone surface, occurring equally on the injected and uninjected sides. Bone loss was seen only on the side of the BoNT/A injection. Cortical as well as trabecular bone was severely affected. The midcondylar region lost the most bone. Recovery at 12 weeks was insignificant. Condylar cartilage thickness showed no treatment effect but did increase with time. The numbers of proliferating cells were similar in the treatment groups, but the BoNT/A animals showed more side asymmetry associated with the condylar defects.

CONCLUSIONS

Bone loss may be a risk factor for the use of botulinum toxin in jaw muscles.

Social variables exert selective pressures in the evolution and form of primate mimetic musculature

Mammals use their faces in social interactions more so than any other vertebrates. Primates are an extreme among most mammals in their complex, direct, lifelong social interactions and their frequent use of facial displays is a means of proximate visual communication with conspecifics. The available repertoire of facial displays is primarily controlled by mimetic musculature, the muscles that move the face. The form of these muscles is, in turn, limited by and influenced by phylogenetic inertia but here we use examples, both morphological and physiological, to illustrate the influence that social variables may exert on the evolution and form of mimetic musculature among primates. Ecomorphology is concerned with the adaptive responses of morphology to various ecological variables such as diet, foliage density, predation pressures, and time of day activity. We present evidence that social variables also exert selective pressures on morphology, specifically using mimetic muscles among primates as an example. Social variables include group size, dominance 'style', and mating systems. We present two case studies to illustrate the potential influence of social behavior on adaptive morphology of mimetic musculature in primates: (1) gross morphology of the mimetic muscles around the external ear in closely related species of macaque (Macaca mulatta and Macaca nigra) characterized by varying dominance styles and (2) comparative physiology of the orbicularis oris muscle among select ape species. This muscle is used in both facial displays/expressions and in vocalizations/human speech. We present qualitative observations of myosin fiber-type distribution in this muscle of siamang (Symphalangus syndactylus), chimpanzee (Pan troglodytes), and human to demonstrate the potential influence of visual and auditory communication on muscle physiology. In sum, ecomorphologists should be aware of social selective pressures as well as ecological ones, and that observed morphology might reflect a compromise between the demands of the physical and the social environments.

Chewed out: an experimental link between food material properties and repetitive loading of the masticatory apparatus in mammals

Using a model organism (rabbits) that resembles a number of mammalian herbivores in key aspects of its chewing behaviors, we examined how variation in dietary mechanical properties affects food breakdown during mastication. Such data have implications for understanding phenotypic variation in the mammalian feeding apparatus, particularly with respect to linking jaw form to diet-induced repetitive loading. Results indicate that chewing frequency (chews/s) is independent of food properties, whereas chewing investment (chews/g) and chewing duration(s), which are proportional to repetitive loading of the jaws, are positively related to food stiffness and toughness. In comparisons of displacement-limited and stress-limited fragmentation indices, which respectively characterize the intraoral breakdown of tough and stiff foods, increases in chewing investment and duration are linked solely to stiffness. This suggests that stiffer foods engender higher peak loads and increased cyclical loading. Our findings challenge conventional wisdom by demonstrating that toughness does not, by itself, underlie increases in cyclical loading and loading duration. Instead, tough foods may be associated with such jaw-loading patterns because they must be processed in greater volumes owing to their lower nutritive quality and for longer periods of time to increase oral exposure to salivary chemicals.

What does feeding system morphology tell us about feeding?

Feeding is the set of behaviors whereby organisms acquire and process the energy required for survival and reproduction. Thus, feeding system morphology is presumably subject to selection to maintain or improve feeding performance. Relationships among feeding system morphology, feeding behavior, and diet not only explain the morphological diversity of extant primates, but can also be used to reconstruct feeding behavior and diet in fossil taxa. Dental morphology has long been known to reflect aspects of feeding behavior and diet but strong relationships of craniomandibular morphology to feeding behavior and diet have yet to be defined.

Effect of asymmetric force on the condylar cartilage, subchondral bone and collagens in the temporomandibular joints

This study aimed to define the effects of asymmetric force on rat temporomandibular joints (TMJs). A total of 232 10-week-old rats were used in the experiment. Their left TMJs were kept forward and upward with 40g or 120g. The histological and osteogenic changes, as well as the expression of type I, II and III collagens were observed. Our results showed that the curve of the cartilage thickness changes in the anterior part of the treated side in the heavy force group (HS) decreased first and increased later during the strength and the recovery periods, while the reverse changes were shown in the middle and posterior parts. The cartilage thickness change on the other side in the heavy force group (HO) was the opposite. Additionally, the cartilage thickness change on the treated side and the other side of the light force group (LS and LO) were similar to but not as significantly changed as HS and HO. There were significant differences among the experimental groups. The subchondral bone trabecula also decreased after the pressure loading and removing, then recovered, without significant differences among these groups. Furthermore, more pathological changes such as fractures, bone cysts, the degradation of type II collagen and the increased expression of type III collagen were observed on the treated sides following the application of heavy force. In contrast, more osteogenesis and more active changes were found in the light force group. In conclusion, our study demonstrated that asymmetric force exerted different effects on the cartilage, subchondral bone and collagens of TMJs. Greater changes occurred in the heavy force group, and light force provided more benefits for TMJs remodelling.

Effects of a liquid diet on the temporomandibular joint of growing rats

OBJECTIVE

The aim of the present study was to clarify the effects of a liquid diet on the temporomandibular joint (TMJ) in growing rats.

MATERIALS AND METHODS

Twenty-four male Wistar rats were weaned at 21 days and divided into control and experimental groups (12 in each group). Control rats were fed a solid diet and experimental rats were fed a liquid diet from 1 to 8 weeks. After injection with 5-bromo-2'-deoxyuridine (BrdU), the animals were perfused and the heads were removed. Serial coronal sections of the TMJ were stained with hematoxylin and eosin, or BrdU immunohistochemistry was done (12 rats in each group). Three dimensions and the thicknesses of the cartilage layers of the TMJ were measured, and cell proliferation in the TMJ was examined.

RESULTS

After 4 weeks, the height and width of the mandibular fossa and the width and length of the mandibular condyle were smaller in the experimental groups than in the control groups. The cartilage layer in these areas was also thinner at 4 weeks. The BrdU levels in the intermediate zone of the mandibular fossa (at 4 weeks) and the mandibular condyle (at 1 and 4 weeks) were lower in the experimental groups than in the controls.

CONCLUSION

These findings suggest that the growth of the mandibular fossa and mandibular condyle of rats was inhibited by the low proliferative activity of intermediate zone cells induced by liquid feeding.

Experimental perspective on fallback foods and dietary adaptations in early hominins

The robust jaws and large, thick-enameled molars of the Plio-Pleistocene hominins Australopithecus and Paranthropus have long been interpreted as adaptations for hard-object feeding. Recent studies of dental microwear indicate that only Paranthropus robustus regularly ate hard items, suggesting that the dentognathic anatomy of other australopiths reflects rare, seasonal exploitation of hard fallback foods. Here, we show that hard-object feeding cannot explain the extreme morphology of Paranthropus boisei. Rather, analysis of long-term dietary plasticity in an animal model suggests year-round reliance on tough foods requiring prolonged postcanine processing in P. boisei. Increased consumption of such items may have marked the earlier transition from Ardipithecus to Australopithecus, with routine hard-object feeding in P. robustus representing a novel behaviour.

Teaching an old jaw new tricks: Diet-induced plasticity in a model organism, from weaning to adulthood

Many organisms exhibit a decrease in the ability to modify their phenotypes in response to shifts in environmental conditions as they mature. Such age-dependent plasticity has important implications in a variety of evolutionary and ecological contexts, particularly with respect to understanding adaptive responses to heterogeneous environments. In this study we used experimental diet manipulation to examine the life-history trajectory of plasticity in the feeding complex of a model organism, the white rabbit (Oryctolagus cuniculus). We demonstrate that, contrary to expectations derived from previous cross-sectional studies of skeletal plasticity, the jaws of weanlings and young adults exhibit similar increases in relative bone cross-sectional areas in response to the introduction of mechanically challenging foods into their diets. Furthermore, we present evidence that sensitivity to loading patterns persists well into adulthood in some regions of the masticatory apparatus in rabbits, indicating that there is an extended window of opportunity to respond to changes in dietary properties during an animal's life span. We conclude that certain aspects of the facial skeleton of rabbits, and perhaps mammals in general, are sensitive to environmental stimuli long after skeletal maturity is achieved, highlighting the importance of plasticity as a source of adaptive variation at later life-history stages.

Functional and morphological correlates of mandibular symphyseal form in a living human sample

Variation in recent human mandibular form is often thought to reflect differences in masticatory behavior associated with variation in food preparation and subsistence strategies. Nevertheless, while mandibular variation in some human comparisons appear to reflect differences in functional loading, other comparisons indicate that this relationship is not universal. This suggests that morphological variation in the mandible is influenced by other factors that may obscure the effects of loading on mandibular form. It is likely that highly strained mandibular regions, including the corpus, are influenced by well-established patterns of lower facial skeletal integration. As such, it is unclear to what degree mandibular form reflects localized stresses incurred during mastication vs. a larger set of correlated features that may influence bone distribution patterns. In this study, we examine the relationship between mandibular symphyseal bone distribution (i.e., second moments of area, cortical bone area) and masticatory force production (i.e., in vivo maximal bite force magnitude and estimated symphyseal bending forces) along with lower facial shape variation in a sample of n = 20 living human male subjects. Our results indicate that while some aspects of symphyseal form (e.g., wishboning resistance) are significantly correlated with estimates of symphyseal bending force magnitude, others (i.e., vertical bending resistance) are more closely tied to variation in lower facial shape. This suggests that while the symphysis reflects variation in some variables related to functional loading, the complex and multifactorial influences on symphyseal form underscores the importance of exercising caution when inferring function from the mandible especially in narrow taxonomic comparisons.

Botulinum neurotoxin type A in the masseter muscle: effects on incisor eruption in rabbits

INTRODUCTION

Botulinum neurotoxins are responsible for the paralytic food poisoning, botulism. Commercial formulations such as botulinum neurotoxin type A are increasingly used for various conditions, including cosmetic recontouring of the lower face by injection of the large masseter muscles. The paralysis of a major muscle of mastication lowers occlusal force and thus might affect tooth eruption. The purpose of this study was to investigate the effects of unilateral masseter muscle injection of botulinum neurotoxin type A on the rate of eruption of incisors in a rabbit model. We hypothesized that the teeth would overerupt in an underloaded environment.

METHODS

Forty rabbits were injected with either botulinum neurotoxin type A or saline solution in 1 masseter muscle. Mastication and muscle force production were monitored, and incisor eruption rate was assessed by caliper measurement of grooved teeth.

RESULTS

The injection of saline solution had no effect. The masseter muscle injected with botulinum neurotoxin type A showed a dramatic loss of force 3 weeks after injection despite apparently normal mastication. Incisor eruption rate was significantly decreased for the botulinum neurotoxin type A group, an effect attributed to decreased attrition.

CONCLUSIONS

This study has implications for orthodontics. Although findings from ever-growing rabbit incisors cannot be extrapolated to human teeth, it is clear that botulinum neurotoxin type A caused a decrease in bite force that could influence dental eruption.