Potential health effects of gasoline and its constituents: A review of current literature (1990-1997) on toxicological data

Assessment of genotoxicity biomarkers in gasoline station attendants due to occupational exposure

Gasoline station attendants are exposed to numerous chemicals that might have genotoxic and carcinogenic potential, such as benzene in fuel vapor and particulate matter and polycyclic aromatic hydrocarbons in vehicle exhaust emission. According to IARC, benzene and diesel particulates are Group 1 human carcinogens, and gasoline has been classified as Group 2A "possibly carcinogenic to humans." At gas stations, self-service is not implemented in Turkey; fuel-filling service is provided entirely by employees, and therefore they are exposed to those chemicals in the workplace during all working hours. Genetic monitoring of workers with occupational exposure to possible genotoxic agents allows early detection of cancer. We aimed to investigate the genotoxic damage due to exposures in gasoline station attendants in Turkey. Genotoxicity was evaluated by the Comet, chromosomal aberration, and cytokinesis-block micronucleus assays in peripheral blood lymphocytes. Gasoline station attendants (n = 53) had higher tail length, tail intensity, and tail moment values than controls (n = 61). In gasoline station attendants (n = 46), the frequencies of chromatid gaps, chromosome gaps, and total aberrations were higher compared with controls (n = 59). Increased frequencies of micronuclei and nucleoplasmic bridges were determined in gasoline station attendants (n = 47) compared with controls (n = 40). Factors such as age, duration of working, and smoking did not have any significant impact on genotoxic endpoints. Only exposure increased genotoxic damage in gasoline station attendants independently from demographic and clinical characteristics. Occupational exposure-related genotoxicity risk may increase in gasoline station attendants who are chronically exposed to gasoline and various chemicals in vehicle exhaust emissions.

Control of n-Butanol Induced Lipidome Adaptations in E. coli

The versatile compound n-butanol is one of the most promising biofuels for use in existing internal combustion engines, contributing to a smooth transition towards a clean energy society. Furthermore, n-butanol is a valuable resource to produce more complex molecules such as bioplastics. Microbial production of n-butanol from waste materials is hampered by the biotoxicity of n-butanol as it interferes with the proper functioning of lipid membranes. In this study we perform a large-scale investigation of the complete lipid-related enzyme machinery and its response to exposure to a sublethal concentration of n-butanol. We profiled, in triplicate, the growth characteristics and phospholipidomes of 116 different genetic constructs of E. coli, both in the presence and absence of 0.5% n-butanol (v/v). This led to the identification of 230 lipid species and subsequently to the reconstruction of the network of metabolites, enzymes and lipid properties driving the homeostasis of the E. coli lipidome. We were able to identify key lipids and biochemical pathways leading to altered n-butanol tolerance. The data led to new conceptual insights into the bacterial lipid metabolism which are discussed.

Lead in plastics - Recycling of legacy material and appropriateness of current regulations

X-ray fluorescence spectrometry has been employed to measure Pb in a wide range of consumer and environmental plastics, including food-packaging material, household goods, electronic casings, beach litter and agricultural waste. Results reveal high concentrations of Pb (>1000 mg kg^-1) in historical items that are still in use or circulation (e.g. toys, construction plastics, wiring insulation) and variable, but generally lower concentrations in more recently manufactured articles. Analysis of Br, Cl and Cr, proxies for brominated flame retardants, polyvinyl chloride (PVC) and chromate pigments, respectively, suggests that as historical material is recycled, Pb from electronic plastics and pigments, but not PVC, is dispersed into a variety of newer products. Although most cases in the consumer sector comply with relevant EU Directives, some products that are non-compliant highlight shortfalls in regulations where recycling is involved and potential problems arising from the direct fashioning of industrial plastics into new consumer goods through attempts to be environmentally positive. The uncontrolled loss of historical and recycled plastics has also resulted in Pb contamination of the environment. Here, it is proposed that litter can be classified as hazardous depending on its Pb content and according to existing regulations that embrace consumer plastics.

Effect of occupational exposure to petrol and gasoline components on liver and renal biochemical parameters among gas station attendants, a review and meta-analysis

OBJECTIVES

Kidney and liver are of the most affected organs during permanent exposure to petrol and gasoline components in gas stations. This study aims to investigate the renal and liver involvements in these workers using meta-analysis.

METHODS

PubMed, Scopus, Science direct, ISI web of science, and Google scholar motor engine were searched using Mesh terms of the relevant keywords. Screening of titles, abstracts and full texts was continued until the eligible articles meeting the inclusion/exclusion criteria were selected. Quality assessment was conducted using NOS (Newcastle-Ottawa Quality score). The pooled standard mean difference of the renal and liver indices between exposed/unexposed groups was estimated using Stata ver. 11 software.

RESULTS

In this systematic review, 22 papers were entered. The pooled standard mean difference (95% confidence interval) between exposed and unexposed groups was estimated as of 0.74 (0.28, 1.21) for alkaline phosphatase (ALP), 2.44 (1.80, 3.08) for aspartate transaminase (AST), 2.06 (1.42, 2.69) for alanine transaminase (ALT), 0.10 (-0.09, 0.29) for total Bilirubin (TB), 0.74 (-0.42, -1.90) for total protein (TP), -0.49 (-0.82, -0.15) for albumin, 0.88 (-0.10, 1.87) for uric acid, 1.02 (0.45, 1.59) for creatinine and 1.44 (0.75, 2.13) for blood urea nitrogen (BUN).

CONCLUSION

Our meta-analysis showed that the serum AST, ALT, ALP, total protein, total bilirubin, BUN, uric acid and creatinine levels were higher among workers exposed to petrol and gasoline than control group, while albumin was lower in the serum of the exposed workers. Therefore, occupational exposure to gasoline stations can create adverse effects on kidney and liver function.

Assessment of oxidative stress among refueling workers in an Egyptian setting

BACKGROUND

Unlike developing countries, in Egypt, gasoline is dispensed at dedicated stations by gasoline filling workers. This leads to high levels of exposure to the aromatic compounds in gasoline [principally benzene, toluene, ethyl benzene, and xylene (BTEX)] with the consequences of adverse health effects including oxidative stress.

OBJECTIVE(S)

To assess oxidative stress and trace metal levels among Egyptian gas filling workers.

METHODS

A cross-sectional study was conducted among 50 gasoline filling station workers (exposed group) and a matched group of 50 clerical workers (non-exposed group). Trace metal levels (Cu, Zn, Fe, and Mn) and the activities of the antioxidant enzymes superoxide dismutase (SOD) and glutathione peroxidase (GPx) were measured in sera of all enrolled participants using atomic absorption spectroscopy. BTEX levels were assessed in the environment of the studied gas filling stations using the MIRAN IR system.

RESULTS

All the measured trace metal levels and antioxidant enzyme activities were significantly lower among the exposed workers than among the non-exposed workers. All trace metals decreased significantly in relation to SOD activity among the exposed workers, whereas only Zn and Cu decreased in relation to SOD and GPx activity among the non-exposed workers. The exposed workers did not comply with the use of the required personal protective equipment (PPE) to avoid the dangerous effects of BTEX exposure. Among BTEX components, benzene exceeded the allowable Egyptian TLV in the studied gasoline stations (110.4 mg/m3 versus 1.6 mg/m3, respectively). The hygienic effect (HE) of the BTEX pollutant mixture exceeded the allowed borderline HE in Egypt although it did not show a significant correlation with different oxidative stress biomarkers and trace metals.

CONCLUSION

Exposure to BTEX at gasoline filling stations lowers the levels of antioxidant enzyme activities and trace metals due to the strong hygienic effect of BTEX. Individual protection using the proper PPE should therefore be enforced. Research assessing the need of providing refueling workers with supplements of necessary trace metals and antioxidants is warranted.

The effect of occupational exposure to petrol on pulmonary function parameters: a review and meta-analysis

Introduction Exposure to petrol and gasoline can have harmful effects on the lungs. This review aimed to summarize the reported effects of this exposure on pulmonary function parameters. Methods Relevant studies were identified by a comprehensive search in PubMed, Scopus, Science Direct and Google Scholar databases. Irrelevant studies were excluded. Quality assessment was performed using the Newcastle-Ottawa score (NOS). The standard mean difference of pulmonary parameters between exposed and unexposed petrol station attendants was pooled using random effects. Meta-regression was used to investigate factors probably related to heterogeneity. Studies affecting the total estimates were assessed during sensitivity analysis. The Egger test was performed to investigate any evidence of publication bias. Results Eventually, 26 studies entered the meta-analysis, and the pooled standard difference [95% confidence interval (CI)] of forced vital capacity (FVC), forced expiratory volume in the first second (FEV1), FEV1/FVC, vital capacity (VC), peak expiratory flow (PEF), forced expiratory flow (FEF25-75) and maximum voluntary ventilation (MVV) in the exposed minus unexposed groups was -1.08 L (95% CI: -1.38, -0.78), -0.92 L (-1.15, -0.69), -0.65 (-1.01, -0.30), -0.51 L (-0.96, -0.06), -0.96 L/s (-1.21, -0.69), -0.78 L/s (1.14, -0.42) and -0.58 L/min (-0.90, -0.27), respectively, and showed a decrease in all pulmonary parameters in the exposed group. Conclusion Occupational exposure to petrol fumes is a risk factor for lung function and there is a reverse relation between lung function and the duration of exposure.

Association of environmental exposure with hematological and oxidative stress alteration in gasoline station attendants

Gasoline station attendants spend a great deal of their time in the direct exposure to noxious substances such as benzene and byproducts of gasoline combustion. Such occupational exposure increases the risk of oxidative stress. This study aimed to evaluate hematological and biochemical alterations among petrol station workers. Forty gas station attendants and 39 non-attendants were recruited as exposed and control subjects, respectively. Plasma samples were evaluated for hemoglobin, hematocrit, and red blood cell count via the Sysmex KX-21 analyzer. Then, oxidized hemoglobin, methemoglobin, and hemichrome were measured spectrophotometrically. Moreover, serum antioxidant capacity and protein oxidation were evaluated. The means ± SD of hemoglobin (16.76 ± 0.14 g/dl vs 15.25 ± 0.14 g/dl), hematocrit (49.11 ± 0.36% vs 45.37 ± 0.31%), RBC count (5.85 ± 0.06 mil/μl vs 5.33 ± 0.06 mil/μl), Met-HB (1.07 ± 0.07 g/dl vs 0.39 ± 0.04 g/dl), and hemichrome (0.80 ± 0.07 g/dl vs 0.37 ± 0.02 g/dl) in the exposed group were significantly greater than the control group (P < 0.001). The results of the independent-sample t test illustrated that the FRAP test value in the exposed group (0.23 ± 0.01 mM) was significantly lower than the control group (0.34 ± 0.01 mM), while the value of the plasma protein carbonyl test in the exposed group (7.47 ± 0.33 mmol/mg protein) was meaningfully greater than the control group (5.81 ± 0.19 mmol/mg protein) (P < 0.001). In conclusion, gas station attendants suffer from higher levels of oxidative stress, and they need to take antioxidants in order to minimize the effects of oxidative stress.

Genotoxicity of three biofuel candidates compared to reference fuels

Global demand for alternative energy sources increases due to concerns regarding energy security and greenhouse gas emissions. However, little is known regarding the impacts of biofuels to the environment and human health even though the identification of such impacts is important to avoid biofuels leading to undesired effects. In this study mutagenicity and genotoxicity of the three biofuel candidates ethyl levulinate (EL), 2-methyltetrahydrofuran (2-MTHF) and 2-methylfuran (2-MF) were investigated in comparison to two petroleum-derived fuels and a biodiesel. None of the samples induced mutagenicity in the Ames fluctuation test. However, the Micronucleus assay revealed significant effects in Chinese hamster (Cricetulus griseus) V79 cells caused by the potential biofuels. 2-MF revealed the highest toxic potential with significant induction of micronuclei below 20.0 mg/L. EL and 2-MTHF induced micronuclei only at very high concentrations (>1000.0 mg/L). In regard to the genotoxic potential of 2-MF, its usage as biofuel should be critically discussed.

The emission of BTEX compounds during movement of passenger car in accordance with the NEDC

The results of the research in the field of benzene, toluene, ethylbenzene and xylene isomers (BTEX) concentrations in exhaust gases of spark ignition engines under different operating conditions are presented in this paper. The aim of this paper is to gain a clearer insight into the impact of different engine working parameters on the concentrations of BTEX. The experimental investigation has been performed on the SCHENCK 230 W test stand with the controlled IC engine. The engine operating points have been chosen based on the results of a simulation and they are considered as the typical driving conditions according to the New European Driving Cycle. Concentration levels of BTEX compounds in exhaust gas mixtures have been determined by gas chromatography technique by using the combination of Supelcowax 10-Polyethylene glycol column and the PID detector. Based on the experimental research results, the emission model of BTEX compounds has been defined by the simulation of movement of a Fiat Punto Classic passenger car in accordance with the NEDC cycle. Using the results obtained within the simulation, the official statistics on the number of gasoline-powered cars on the territory of the Republic of Serbia and the European Commission data on the annual distance traveled by car, the amounts of BTEX compounds emitted annually per car have been estimated, as well as the emissions of the entire Serbian car fleet.

Investigating the effect of MgO and CeO2 metal nanoparticle on the gasoline fuel properties: empirical modeling and process optimization by surface methodology

The main purpose of this paper is to investigate how to optimize gasoline in order to reduce the emitted pollutants caused by combustion, while the torque and power of the engine reach the maximum capabilities. To optimize gasoline formulation, an ethanol and magnesium oxide (MgO) or cerium oxide (CeO₂) mixture was added to gasoline. This study explores the role of main variables such as type of metal nanoparticle additive, engine speed, and throttle on engine performance and exhaust gas emissions through the modeling and optimization methods. Experimental design conducted through the implementation of D-optimal design, taking into account the three main parameters. To review the efficiency of this novel fuel, it was tested by a four-stroke engine connected to a dynamometer and an analyzer, under different controlled environments: speeds of 1500, 2000, 2500, and 3000 rpm at both half and full throttle conditions. The analyzed data are the power and torque of the engine, the amount of emitted CO, CO₂, HC, and NO_x, the octane index, and the viscosity. The analyzed data were calculated and turned into models. Applying the models to data (the optimization process), close correlation between predicted and actual outcomes was found, highlighting the validity of the work. A secondary finding is that the CeO₂ mixture used at higher speeds and throttles produces less emissions, while lower speeds and throttles using the MgO mixture produce less emissions.

Acute embryo toxicity and teratogenicity of three potential biofuels also used as flavor or solvent

The demand for biofuels increases due to concerns regarding greenhouse gas emissions and depletion of fossil oil reserves. Many substances identified as potential biofuels are solvents or already used as flavors or fragrances. Although humans and the environment may be readily exposed little is known regarding their (eco)toxicological effects. In this study, the three potential biofuels ethyl levulinate (EL), 2-methyltetrahydrofuran (2-MTHF) and 2-methylfuran (2-MF) were investigated for their acute embryo toxicity and teratogenicity using the fish embryo toxicity (FET) test to identify unknown hazard potentials and to allow focusing further research on substances with low toxic potentials. In addition, two fossil fuels (diesel and gasoline) and an established biofuel (rapeseed oil methyl ester) were investigated as references. The FET test is widely accepted and used in (eco)toxicology. It was performed using the zebrafish Danio rerio, a model organism useful for the prediction of human teratogenicity. Testing revealed a higher acute toxicity for EL (LC50: 83mg/L) compared to 2-MTHF (LC50: 2980mg/L), 2-MF (LC50: 405mg/L) and water accommodated fractions of the reference fuels including gasoline (LC50: 244mg DOC/L). In addition, EL caused a statistically significant effect on head development resulting in elevated head lengths in zebrafish embryos. Results for EL reduce its likelihood of use as a biofuel since other substances with a lower toxic potential are available. The FET test applied at an early stage of development might be a useful tool to avoid further time and money requiring steps regarding research on unfavorable biofuels.

Assessment of occupational exposure to BTEX compounds at a bus diesel-refueling bay: A case study in Johannesburg, South Africa

Of increasing concern is pollution by volatile organic compounds, with particular reference to five aromatic hydrocarbons (benzene, toluene, ethyl benzene and two isomeric xylenes; BTEX). These pollutants are classified as hazardous air pollutants. Due to the potential health risks associated with these pollutants, BTEX concentrations were monitored at a bus diesel-refueling bay, in Johannesburg, South Africa, using gas chromatography, coupled with a photo-ionization detector. Results indicate that o-xylene (29-50%) and benzene (13-33%) were found to be the most abundant species of total BTEX at the site. Benzene was within South African occupational limits, but above international occupational exposure limits. On the other hand, occupational concentrations of toluene, ethyl-benzene and xylenes were within national and international occupational limits throughout the monitoring period, based on 8-hour workday weighted averages. Ethyl-benzene and p-xylene concentrations, during winter, correspond to activity at the site, and thus idling of buses during refueling may elevate results. Overall, occupational air quality at the refueling bay is a matter of health concern, especially with regards to benzene exposure, and future reduction strategies are crucial. Discrepancies between national and international limit values merit further investigation to determine whether South African guidelines for benzene are sufficiently precautionary.

Estimating the health risks associated with air pollution in Baghdad City, Iraq

Data of total suspended particulate, O₃, SO₂, NO, NO₂, CO, methane, and non-methane hydrocarbons gathered from three monitoring stations in Baghdad City for the period from 2009 to 2012 have been analyzed. So an attempt is made to calculate the monthly quality indexes based on US EPA and UK system. Concentrations of most air pollutants in Baghdad City have shown a downward trend in recent years, but they are generally in many instances worse than natural ambient air; thus, all pollutants (except CO) fluctuated between high and below limits certified by Iraqi and international standards. The results show that the average of TSP during 2009-2012 were very high, and they pose concern for Baghdad population. The SO₂/CO concentration ratios were less than 1 suggesting that mobile emissions are the primary sources within the study area. It has been observed that the concentrations of the most pollutants are high in summer in comparison to the other seasons. The peak concentrations of pollutants are linked to traffic density, private generators, and chemical processes in the atmosphere. Aside from single air pollutant standards, AQI and API indices enable an additional assessment of the air quality conditions. The application of the UK system suppose low pollution with all pollutants expect TSP. Analysis of AQI values for an average of concentrations CO, NO₂, SO₂, and O₃ are categorized as good to moderate during the study period, while the same index indicated that the TSP located within the three categories (unhealthy, very unhealthy, and hazardous).

The effects of exposure to petrol vapours on growth, haematological parameters and oxidative markers in sprague-dawley male rats

BACKGROUND

Petrol is known to be hazardous to human health and is associated with various health effects, such as haematotoxicity and oxidative stress. Although Malaysia has adopted the European fuel quality standards in recent years in order to reduce petroleum pollutants and to improve air quality, gasoline with research octane number 95 (RON95), believed to contain benzene and other toxic substances, is still widely used all over the country. This study assessed the effect of RON95 gasoline on haemtological parameters of rats after 11 weeks of exposure.

METHODS

A total of 16 male Sprague-Dawley rats were randomly divided into two groups: control (exposed to ambient air daily) and gasoline exposed (exposed to petrol fumes at 11.13 ± 1.1cm(3)/h for 6h daily, 6 days/week) groups. Body weight was monitored daily. At the end of 11 weeks, the rats were sacrificed, bone marrow was extracted for cytological examination, and blood samples were collected for a full blood picture examination, full blood counts and oxidative markers.

RESULTS

The results show that gasoline inhalation was associated with a significant (P < 0.05) reduction in the rate of weight gain and a reduction in mean corpuscular haemoglobin concentration and red cell distribution width. It was also observed that the inhalation of gasoline was associated with changes in the nuclei of megakaryocytes, hence causing an increase in the percentage of abnormal megakaryocytes with detached nuclei, hypo-lobulation and/or disintegration. However, the inhalation of gasoline did not cause significant changes in oxidative markers in the erythrocytes.

CONCLUSION

This study shows that 11 weeks of inhaling RON95 petrol vapours caused adverse effects on weight gain, blood cell indices and bone marrow megakaryocytes, but did not cause significant changes in oxidative markers in erythrocytes. The definitive effects of these changes on health require further confirmation.

A novel electronic nose based on porous In2O3 microtubes sensor array for the discrimination of VOCs

We have innovatively developed an electronic nose consisting of only one type of semiconductor metal oxide (SMO) material. The representative SMO material, porous In2O3 microtubes in this work, offered great surface area and large gas penetration channels. By using a solvent casting process, different amounts of porous In2O3 microtubes were coated on Al2O3 substrate, forming a resistometric SMO sensor array-based electronic nose. Each sensing unit in the electronic nose exhibited independent response toward ethanol. We have successfully applied this electronic nose to distinguish four alcohols at the same concentrations (100 ppm), and also utilized the electronic nose for the discrimination of 14 volatile organic compounds (VOCs). Clear differentiation among all the 14 VOCs both at their immediately dangerous to life or health (IDLH) and the permissible exposure limit (PEL) concentrations has been achieved with no errors or misclassifications. We expect that this method will expand the application of SMO sensor array-based electronic nose which has been largely limited by the selection of commercially available SMOs and dopants.

Evaluation of o-xylene and other volatile organic compounds removal using a xylene-acclimated biotrickling filter

In this study, performance evaluation for the gas-phase o-xylene removal using a xylene-acclimated biotrickling filter (BTF) was conducted. Substrate interactions during aerobic biodegradation of three poorly soluble compounds, both individually and in paired mixtures (namely, o-xylene and ethyl acetate, o-xylene and dichloromethane, which are common solvents used by pharmaceutical industry), were also investigated. Experimental results indicate that a maximum elimination capacity of 99.3 g x m(-3) x h(-1) (70% removal) was obtained at an o-xylene loading rate of 143.0 g x m(-3) x h(-1), while the top packing layer (one-third height of the three packing layers) only contributed about 13% to the total elimination capacity. Kinetic constants for o-xylene biodegradation and the pattern of o-xylene removal performance along the height of the BTF were obtained through the modified Michaelis-Menten kinetics and convection-diffusion reaction model, respectively. A reduction of removal efficiency in o-xylene (83.2-74.5% removal at a loading rate of 40.3 g x m(-3) x h(-1) for the total volatile organic compound (VOC) loading rate of 79 g x m(-3) x h(-1)) in the presence of ethyl acetate (100% removal) was observed, while enhanced o-xylene removal efficiency (71.6-78.6% removal at a loading rate of 45.1 g x m(-3) x h(-1) for the total VOC loading rate of 90 g x m(-3) x h(-1)) was achieved in the presence of dichloromethane (35.6% removal). This work shows that a BTF with xylene-acclimated microbial consortia has the ability to remove several poorly soluble compounds, which would advance the knowledge on the treatment of pharmaceutical VOC emissions.

Study of the correlation between blood cholinesterases activity, urinary dialkyl phosphates, and the frequency of micronucleated polychromatic erythrocytes in rats exposed to disulfoton

Organophosphates (OPs) are widely used as pesticides, and its urinary metabolites as well as the blood cholinesterases (ChEs) activity have been reported as possible biomarkers for the assessment of this pesticide exposure. Moreover, the OPs can induce mutagenesis, and the bone marrow micronucleus test is an efficient way to assess this chromosomal damage. This paper reports a study carried out to verify the correlation among the disulfoton exposure, blood ChEs activity, urinary diethyl thiophosphate (DETP), and diethyl dithiophosphate (DEDTP), as well as micronucleated polychromatic erythrocytes (MNPCEs) frequency. Four groups of rats (n=12) were exposed to disulfoton at 0, 2.8, 4.7, and 6.6 mg kg-1 body weight. The blood ChEs activity, urinary DETP and DEDTP concentrations, and MNPCEs frequency were determined. It was observed that the plasmatic and erythrocytary ChEs activity decreased from 2.9% to 0.5% and from 35.9 to 3.3%, respectively, when the disulfoton dose was increased from 0 to 6.6 mg kg-1 (correlation of 0.99). Urinary DETP and DEDTP concentrations, as well as the MNPCEs frequency, increased from 0 to 6.58 µg mL-1, from 0 to 0.04 µg mL-1, and from 0 to 1.4%, respectively, when the disulfoton dose was increased from 0 to 6.58 mg kg-1 body weight.

A novel isolator-based system promotes viability of human embryos during laboratory processing

In vitro fertilisation (IVF) and related technologies are arguably the most challenging of all cell culture applications. The starting material is a single cell from which one aims to produce an embryo capable of establishing a pregnancy eventually leading to a live birth. Laboratory processing during IVF treatment requires open manipulations of gametes and embryos, which typically involves exposure to ambient conditions. To reduce the risk of cellular stress, we have developed a totally enclosed system of interlinked isolator-based workstations designed to maintain oocytes and embryos in a physiological environment throughout the IVF process. Comparison of clinical and laboratory data before and after the introduction of the new system revealed that significantly more embryos developed to the blastocyst stage in the enclosed isolator-based system compared with conventional open-fronted laminar flow hoods. Moreover, blastocysts produced in the isolator-based system contained significantly more cells and their development was accelerated. Consistent with this, the introduction of the enclosed system was accompanied by a significant increase in the clinical pregnancy rate and in the proportion of embryos implanting following transfer to the uterus. The data indicate that protection from ambient conditions promotes improved development of human embryos. Importantly, we found that it was entirely feasible to conduct all IVF-related procedures in the isolator-based workstations.

Preoxidation for colorimetric sensor array detection of VOCs

A disposable preoxidation technique that dramatically improves the detection and identification of volatile organic compounds (VOCs) by a colorimetric sensor array is reported. Passing a vapor stream through a tube packed with chromic acid on silica immediately before the colorimetric sensor array substantially increases the sensitivity to less-reactive VOCs and improves the limits of detection (LODs) ~300-fold, permitting the detection, identification, and discrimination of 20 commonly found indoor VOC pollutants at both their immediately dangerous to life or health (IDLH) and permissible exposure limit (PEL) concentrations. The LODs of these pollutants were on average 1.4% of their respective PELs.

Relationship of personal exposure to volatile organic compounds to home, work and fixed site outdoor concentrations

Personal exposures of 100 adult non-smokers living in the UK, as well as home and workplace microenvironment concentrations of 15 volatile organic compounds were investigated. The strength of the association between personal exposure and indoor home and workplace concentrations as well as with central site ambient air concentrations in medium to low pollution areas was assessed. Home microenvironment concentrations were strongly associated with personal exposures indicating that the home is the driving factor determining personal exposures to VOCs, explaining between 11 and 75% of the total variability. Workplace and central site ambient concentrations were less correlated with the corresponding personal concentrations, explaining up to 11-22% of the variability only at the low exposure end of the concentration range (e.g. benzene concentrations <2.5 μg m(-3)). One of the reasons for the discrepancies between personal exposures and central site data was that the latter does not account for exposure due to personal activities (e.g. commuting, painting). A moderate effect of season on the strength of the association between personal exposure and ambient concentrations was found. This needs to be taken into account when using fixed site measurements to infer exposures.

Modeling the influence of ethanol on the adsorption and desorption of selected BTEX compounds on bentonite and kaolin

The influence of ethanol on the adsorption capacity and desorption kinetics of benzene and toluene on bentonite and kaolin through modeling and experimental study was investigated. The results showed that the adsorption capacity of both soils for the target compounds decreased as ethanol content increased. As ethanol content increased from 0 to 50%, the adsorption capacity for benzene and toluene on bentonite decreased from 3.6 to 0.54 microg(n+1)/(L(n) x g) (by 85%) and 1.91 to 0.01 microg(n+1)/(L(n) x g) (by 99.5%), respectively. For benzene and toluene adsorption on kaolin, the adsorption capacity decreased by 86.5% (from 0.26 to 0.04 microg(n+1)/(L(n) x g) and 98.2% (from 0.13 to 0.002 microg(n+1)/(L(n) x g)), respectively, as ethanol content increased from 0 to 50%. In addition, the desorption rate of benzene and toluene from bentonite decreased by about one order of magnitude as the ethanol increased from 0 to 25% and 0 to 50%, respectively. It can be inferred that ethanol could affect the effectiveness of natural attenuation processes that rely on adsorption to soils as a containment technique for benzene and toluene by retarding the adsorption to soils and remobilizing compounds that had already been adsorbed to soils.

Model development and validation of personal exposure to volatile organic compound concentrations

BACKGROUND

Direct measurement of exposure to volatile organic compounds (VOCs) via personal monitoring is the most accurate exposure assessment method available. However, its wide-scale application to evaluating exposures at the population level is prohibitive in terms of both cost and time. Consequently, indirect measurements via a combination of microenvironment concentrations and personal activity diaries represent a potentially useful alternative.

OBJECTIVE

The aim of this study was to optimize a model of personal exposures (PEs) based on microenvironment concentrations and time/activity diaries and to compare modeled with measured exposures in an independent data set.

MATERIALS

VOC PEs and a range of microenvironment concentrations were collected with active samplers and sorbent tubes. Data were supplemented with information collected through questionnaires. Seven models were tested to predict PE to VOCs in 75% (n = 370) of the measured PE data set, whereas the other 25% (n = 120) was used for validation purposes.

RESULTS

The best model able to predict PE with independence of measurements was based upon stratified microenvironment concentrations, lifestyle factors, and individual-level activities. The proposed model accounts for 40-85% of the variance for individual VOCs and was validated for almost all VOCs, showing normalized mean bias and mean fractional bias below 25% and predicting 60% of the values within a factor of 2.

CONCLUSIONS

The models proposed identify the most important non-weather-related variables for VOC exposures; highlight the effect of personal activities, use of solvents, and exposure to environmental tobacco smoke on PE levels; and may assist in the development of specific models for other locations.

Risk of human health by particulate matter as a source of air pollution--comparison with tobacco smoking

Increased air pollution, containing carcinogenic particulate matter smaller than 2.5 microm (PM(2.5)), has gained particular attention in recent years as a causative factor in the increased incidence of respiratory diseases, including lung cancer. Extensive carcinogenicity studies conducted recently under Good Laboratory Practice conditions by National Toxicology Program in the USA, Ramazzini Foundation in Italy or Contract Research Organizations on numerous chemical compounds have demonstrated the importance of considering dose levels, times and duration of exposure in the safety evaluation of carcinogenic as well as classical toxic agents. Data on exposure levels to chemical carcinogens that produce tumor development have contributed to the evaluation of human carcinogens from extrapolation of animal data. A popular held misconception is that the risk from smoking is the result of inhaling assorted particulate matter and by products from burning tobacco rather than the very low ng levels of carcinogens present in smoke. Consider the fact that a piece of toasted bread contains ng levels of the carcinogen urethane (ethyl carbamate). Yet, no one has considered toast to be a human carcinogen. Future human carcinogenic risk assessment should emphasize consideration of inhalation exposure to higher levels of benzo (a) pyrene and other possible carcinogens and particulate matter present in polluted air derived from automobile exhaust, pitch and coal tar on paved roads and asbestos, in addition to other environmental contaminant exposure via the food and drinking water.

Degradation of benzene over a zinc germanate photocatalyst under ambient conditions

A rod-shaped Zn2GeO4 photocatalyst has been successfully prepared by a surfactant-assisted hydrothermal method. The photocatalyst was characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, UV/vis, N2 adsorption-desorption, and FTIR techniques. The photocatalytic activity of the sample was evaluated by the decomposition of benzene in the gas phase under UV light illumination and was compared with that of bulk Zn2GeO4, commercial titania (Degussa P25), and Pt/P25. The results revealed that the Zn2GeO4 nanorods had the best photocatalytic activity for mineralizing benzene to CO2 among the catalysts examined. No obvious deactivation of Zn2GeO4 nanorods was observed during the prolonged operation of 140 h. It was found that the Zn2GeO4 was also more active and stable than TiO2-based catalysts toward photocatalytic decomposition of other volatile aromatic pollutants (e.g., toluene and ethylbenzene).

The conversion of BTEX compounds by single and defined mixed cultures to medium-chain-length polyhydroxyalkanoate

Here, we report the use of petrochemical aromatic hydrocarbons as a feedstock for the biotechnological conversion into valuable biodegradable plastic polymers--polyhydroxyalkanoates (PHAs). We assessed the ability of the known Pseudomonas putida species that are able to utilize benzene, toluene, ethylbenzene, p-xylene (BTEX) compounds as a sole carbon and energy source for their ability to produce PHA from the single substrates. P. putida F1 is able to accumulate medium-chain-length (mcl) PHA when supplied with toluene, benzene, or ethylbenzene. P. putida mt-2 accumulates mcl-PHA when supplied with toluene or p-xylene. The highest level of PHA accumulated by cultures in shake flask was 26% cell dry weight for P. putida mt-2 supplied with p-xylene. A synthetic mixture of benzene, toluene, ethylbenzene, p-xylene, and styrene (BTEXS) which mimics the aromatic fraction of mixed plastic pyrolysis oil was supplied to a defined mixed culture of P. putida F1, mt-2, and CA-3 in the shake flasks and fermentation experiments. PHA was accumulated to 24% and to 36% of the cell dry weight of the shake flask and fermentation grown cultures respectively. In addition a three-fold higher cell density was achieved with the mixed culture grown in the bioreactor compared to shake flask experiments. A run in the 5-l fermentor resulted in the utilization of 59.6 g (67.5 ml) of the BTEXS mixture and the production of 6 g of mcl-PHA. The monomer composition of PHA accumulated by the mixed culture was the same as that accumulated by single strains supplied with single substrates with 3-hydroxydecanoic acid occurring as the predominant monomer. The purified polymer was partially crystalline with an average molecular weight of 86.9 kDa. It has a thermal degradation temperature of 350 degrees C and a glass transition temperature of -48.5 degrees C.

Picogram measurement of volatile n-alkanes (n-hexane through n-dodecane) in blood using solid-phase microextraction to assess nonoccupational petroleum-based fuel exposure

We describe here a new method for the analysis of alkanes ( n-hexane, n-heptane, n-octane, n-nonane, n-decane, n-undecane, and n-dodecane) in blood using headspace solid-phase microextraction gas chromatography/mass spectrometry. This method is used to measure picogram per milliliter levels of n-alkanes in blood that may result from nonoccupational exposure to alkanes and other volatile nonpolar compounds from common sources such as petroleum-based fuel. This alkane signature is useful in distinguishing typical fuel biomarkers (e.g., benzene and toluene) from other confounding exposure sources such as cigarette smoke. Development of this method required special attention to sample handling as alkanes are not highly soluble in aqueous matrixes and exist as ubiquitous compounds found in many laboratory materials and the environment. In particular, significant n-hexane contamination ( approximately 0.4 ng/mL) occurred from collecting blood samples in vacutainers. This residue was removed by boiling the vacutainer stoppers in methanol followed by vacuum baking. For all the alkanes, the calculated accuracy demonstrated for the water-based standards ranged from 3.3% to 17% as deduced from the difference of the lowest and middle standards from the curve fit. Quality control data among runs over a 10 month period were found to vary from 14% to -29%, with a few exceptions. The resulting quantification limits for n-hexane through n-decane ranged from 0.069 to 0.132 ng/mL. In the analysis of 1200 blood samples from people with no known occupational exposure, median blood levels for all n-alkanes were below these quantification limits. n-Hexane levels above the method detection limit were, however, found in 1.3% of the samples.

Measured and modeled personal exposures to and risks from volatile organic compounds

We developed a personal exposure model using volatile organic compound data collected for teachers and office workers as part of the Boston Exposure Assessment in Microenvironments (BEAM) study. We included participant-specific time-activity and concentration measurements of residential outdoor, residential indoor, and workplace microenvironments, along with average concentrations in various dining, retail, and transportation microenvironments. We used a series of time-weighted personal exposure models to compare measured personal concentrations using median regression models, with bias estimates representing the difference between measured and modeled personal exposures. Incorporating only the outdoor microenvironment results in an unbiased estimate of personal exposure only for carbon tetrachloride. Adding the residential indoor microenvironment provides an unbiased estimate for trichloroethene as well. A model incorporating residential outdoor, indoor, and workplace microenvironments provides an unbiased estimate for the above compounds and chloroform, 1,4-dichlorobenzene, benzene, and alpha-pinene, and adding the transportation microenvironment adds ethylbenzene. A fully saturated model, including outdoor, indoor, workplace, transportation, and all other microenvironments, provides an unbiased estimate for the previously listed compounds along with tetrachloroethene and styrene. MTBE, toluene, o-xylene, d-limonene, formaldehyde, and acetaldehyde were not fully characterized even in the saturated model, emphasizing that additional time-activity and concentration information would more fully characterize personal exposure.

Personal exposure to benzene from fuel emissions among commercial fishers: comparison of two-stroke, four-stroke and diesel engines

Commercial fishers are exposed to unburned hydrocarbon vapors and combustion products present in the emissions from their boat engines. The objective of this study was to measure personal exposure to benzene as a marker of fuel exposure, and to predict exposure levels across categories of carbureted two-stroke, four-stroke and diesel engines. A self-monitoring approach, employing passive monitors, was used to obtain measurements of personal exposure to benzene over time. Mixed-effect linear regression models were used to predict exposure levels, identify significant effects and determine restricted maximum likelihood estimates for within- and between-person variance components. Significant fixed effects for engine type and refueling a car or truck were identified. After controlling for refueling, predicted benzene exposure levels to fishers on boats equipped with two-stroke, four-stroke and diesel engines were 58.4, 38.9 and 15.7 microg/m3, respectively. The logged within-person variance component was 1.43, larger than the between-person variance component of 1.13, indicating that the total variation may be attributable to monitor placement, environmental conditions and other factors that change over time as well as differences between individual work practices. The health consequences of exposure to marine engine emissions are not known. The predicted levels are well below those at which health effects have been attributed, however.

Interactive effects of methyl tertiary-butyl ether (MTBE) and tertiary-amyl methyl ether (TAME), ethanol and some drugs: Triglyceridemia, liver toxicity and induction of CYP (2E1, 2B1) and phase II enzymes in female Wistar rats

The abilities of the gasoline additives methyl tert-butyl ether (MTBE) and tert-amyl methyl ether (TAME) to cause liver damage following oral administration, dosed alone or in combination with model hepatotoxins, were investigated in the rat. Inducibility of liver drug-metabolizing enzyme activities was also studied. Exposure to these ethers (10-20mmol/kg) for 3 days resulted in hepatomegaly (13-30%) and induction of cytochrome P450 (CYP) activity towards N-nitrosodimethylamine (NDMAD), 7-pentoxyresorufin (PROD), and 7-ethoxyresorufin (EROD). Immunoinhibition assays with monoclonal antibodies showed that the ethers were equipotent as inducers of CYP2E1 activity (2-fold increase) but not of CYP2B1, which was elevated up to 260-fold in TAME-treated rats but only by 20-fold in MTBE rats. A slight or no modifying effect was observed on the NADPH:quinone oxidoreductase (NQO1), glutathione S-transferase (GST), and UDP-glucuronosyltransferase (UGT) activities. Alanine aminotransaminase (ALT) and aspartate aminotransaminase (AST) were elevated in blood plasma after administration of the ethers. No dramatic enhancement of liver damage could be detected by plasma enzyme analysis (ALT, AST, alkaline phosphatase, γ-glutamyltransferase) following ether administration (13.5mmol/kg) to rats pretreated with mildly hepatotoxic dosages of ethanol, pyrazole, phenobarbital, acetaminophen (paracetamol), or 13-cis-retinoic acid (13-cis-RA or isotretinoin). Plasma triglycerides increased in TAME-treated rats (1.7-fold) and in all 13-cis-RA-treated groups (2.1-2.8-fold). The findings that MTBE and TAME exhibited a clear but differential inducing effect on two ether-metabolizing CYP forms (2E1 and 2B1) with no marked effect on phase II activities may reflect the importance of these pathways in vivo. The observation that only TAME by itself induced hypertriglyceridemia while acetaminophen- and 13-cis-RA-induced hypertriglyceridemia were aggravated by both ethers, points to differences in their effects on lipid metabolism. TAME was clearly a more potent CNS depressant than MTBE. There was no marked potentiation of drug/chemical-induced acute liver damage either by MTBE or TAME.

Laboratory column study for remediation of MTBE-contaminated groundwater using a biological two-layer permeable barrier

In this study, an in situ biological two-layer permeable reactive barrier system consisting of an oxygen-releasing material layer followed by a biodegradation layer was designed to evaluate the remediation effectiveness of MTBE-contaminated groundwater. The first layer containing calcium peroxide (CaO(2)) and other inorganic salts is to provide oxygen and nutrients for the immobilized microbes in the second layer in order to keep them in aerobic condition and maintain their normal metabolism. Furthermore, inorganic salts such as potassium dihydrogen phosphate (KH(2)PO(4)) and ammonium sulphate ((NH(4))(2)SO(4)) can also decrease the high pH caused by the alkali salt degraded from CaO(2). The second layer using granular expanded perlite as microbial carrier is able to biodegrade MTBE entering the barrier system. Batch experiments were conducted to identify the appropriate components of oxygen-releasing materials and the optimum pH value for the biodegradation of MTBE. At pH=8.0, the biodegradation efficiency of MTBE is the maximum and approximately 48.9%. A laboratory-scale experiment using two continuous upflow stainless-steel columns was then performed to evaluate the feasibility of this designed system. The fist column was filled with oxygen-releasing materials at certain ratio by weight. The second column was filled with expanded perlite granules immobilizing MTBE-degrading microbial consortium. Simulated MTBE-contaminated groundwater, in which dissolved oxygen (DO) content was 0mg/L, was pumped into this system at a flow rate of 500mL/d. Samples from the second column were analyzed for MTBE and its major degradation byproduct. Results showed that MTBE could be removed, and its metabolic intermediate, tert-butyl alcohol (TBA), could also be further degraded in this passive system.

Risk factors of myelodysplastic syndromes: a case-control study

Little is known about the etiology of myelodysplastic syndromes (MDS). A hospital-based case-control study of 354 adult de novo MDS cases and 452 controls was conducted to investigate associations between lifestyle characteristics and MDS risk. The distribution by French-American-British (FAB) type was 67 (19%) refractory anemia (RA), 38 (11%) refractory anemia with ringed sideroblasts (RARS), 43 (12%) chronic myelomonocytic leukemia (CMML), 136 (38%) RA with excess blasts (RAEB), and 70 (20%) RAEB in transformation (RAEBT). Multivariate logistic regression analyses were performed among all MDS cases and among each FAB type and gender. For all MDS combined, family history of hematopoietic cancer (odds ratio (OR) = 1.92), smoking (OR = 1.65), and exposure to agricultural chemicals (OR = 4.55) or solvents (OR = 2.05) were associated with MDS risk. Among RA/RARS cases, smoking (OR = 2.23) and agricultural chemical exposure (OR = 5.68) were the only risk factors identified. For RAEB/RAEBT cases, family history of hematopoietic cancer (OR = 2.10), smoking (OR = 1.52), and exposure to agricultural chemicals (OR = 3.79) or solvents (OR = 2.71) were independent risk factors. Drinking wine reduced risk for all FAB types by almost 50% (OR = 0.54). We found a joint effect between smoking and chemical exposure with the highest risk among smokers exposed to solvents/agricultural chemicals (OR = 3.22). Results from this large study suggest that several factors play a role in MDS predisposition with possible joint effects. Risk profiles seem to differ by FAB type and gender.

Occupation, hobbies, and acute leukemia in adults

Occupational and industrial exposures have been implicated in the etiology of leukemia, yet uncertainty remains regarding potential high risk occupations. We examined the associations between self-reported occupations and hobbies and acute leukemia risk using data from 811 cases and 637 controls participating in a case-control study in the U.S. and Canada. We found that several occupations may increase the risk of acute leukemia, particularly occupations related to petroleum products, rubber, nuclear energy, munitions, plastics, and electronics manufacturing. Differences were noted according to histological type. Other occupations and hobbies were not clearly associated with risk.

Formation of MTBE-DNA adducts in mice measured with accelerator mass spectrometry

Methyl tert-butyl ether (MTBE) is a gasoline oxygenate and antiknock additive substituting for lead alkyls currently in use worldwide. Previous studies have shown that MTBE at very high doses induces tumors in rodents. The aim of the present study was to examine directly the binding ability of MTBE onto DNA, demonstrating its potential genotoxicity. MTBE-DNA adducts and their decay kinetics in mice have been measured by using doubly 14C-labeled MTBE with an advanced, ultrasensitive technique: accelerator mass spectrometry (AMS). It was found that MTBE definitely formed adducts with DNA in mouse lung, liver, and kidney in a log/log linear dose-response relationship. The distribution sequence of DNA adducts in these tissues is: lung > liver > kidney. The level of MTBE-DNA adducts peaked at 12 h postadministration in the lung and peaked at 6 h postadministration in the liver. Then the adducts declined rapidly until 5 days postadministration and thereafter declined much more slowly. To our knowledge, this is the first report on DNA adduction with MTBE in vivo. The mechanism of the formation of MTBE-DNA adducts also is discussed.

Evaluation of potential toxicity from co-exposure to three CNS depressants (toluene, ethylbenzene, and xylene) under resting and working conditions using PBPK modeling

Under OSHA and American Conference of Governmental Industrial Hygienists (ACGIH) guidelines, the mixture formula (unity calculation) provides a method for evaluating exposures to mixtures of chemicals that cause similar toxicities. According to the formula, if exposures are reduced in proportion to the number of chemicals and their respective exposure limits, the overall exposure is acceptable. This approach assumes that responses are additive, which is not the case when pharmacokinetic interactions occur. To determine the validity of the additivity assumption, we performed unity calculations for a variety of exposures to toluene, ethylbenzene, and/or xylene using the concentration of each chemical in blood in the calculation instead of the inhaled concentration. The blood concentrations were predicted using a validated physiologically based pharmacokinetic (PBPK) model to allow exploration of a variety of exposure scenarios. In addition, the Occupational Safety and Health Administration and ACGIH occupational exposure limits were largely based on studies of humans or animals that were resting during exposure. The PBPK model was also used to determine the increased concentration of chemicals in the blood when employees were exercising or performing manual work. At rest, a modest overexposure occurs due to pharmacokinetic interactions when exposure is equal to levels where a unity calculation is 1.0 based on threshold limit values (TLVs). Under work load, however, internal exposure was 87%higher than provided by the TLVs. When exposures were controlled by a unity calculation based on permissible exposure limits (PELs), internal exposure was 2.9 and 4.6 times the exposures at the TLVs at rest and workload, respectively. If exposure was equal to PELs outright, internal exposure was 12.5 and 16 times the exposure at the TLVs at rest and workload, respectively. These analyses indicate the importance of (1) selecting appropriate exposure limits, (2) performing unity calculations, and (3) considering the effect of work load on internal doses, and they illustrate the utility of PBPK modeling in occupational health risk assessment.

Potential ecotoxicological implication of methyl tert-butyl ether (MTBE) spills in the environment

Streptomyceticidal activity of Methyl tert-butyl ether (MTBE) elucidated for the first time. Adverse effect of MTBE, the gasoline additive, against 11 soil inhabitant Streptomyces spp. isolates was investigated. MTBE, an octane enhancer is added to gasoline to reduce atmospheric concentrations of carbon monoxide and ozone. It contaminates soil and groundwater by fuel leaks and spills. Streptomyces spp. are of the major contributors to the biological buffering of soils by exerting beneficial and antagonistic activity against wide range of bacteria and fungi. To evaluate anti-streptomycetidal activity of MTBE, it was tested against 11 soil isolates of Streptomyces isolates and also a plant-root bacterial pathogen, Erwinia carotovora and a plant-root fungal pathogen, Fusarium solani. MTBE did not reveal any growth inhibitory activity against E. carotovora and F. solani, but showed strong inhibitory effect against Streptomyces isolates. The Minimum Inhibitory Concentration (MIC) on Streptomyces isolates was 1/800 of the original MTBE. Fuel leaks and spills have the potential to suppress or eliminate the Streptomyces role in the soil causing alteration in the balance of soil micro flora. This change can promote the domination of microorganisms with adverse biological or ecotoxicological effects.

Differences in source emission rates of volatile organic compounds in inner-city residences of New York City and Los Angeles

The Toxics Exposure Assessment Columbia-Harvard (TEACH) Project characterized personal, indoor, and outdoor concentrations of a suite of volatile organic compounds (VOCs) for high school students living in New York City (NYC) and Los Angeles (LA). This paper presents the analysis of VOC measurements collected indoors and outdoors for 46 students' homes in NYC and for 41 students' homes in LA across two seasons. Dual-sorbent thermal desorption tubes were used for the collection of 15 VOCs and C(18) 2,4-dinitrophenylhydrazine-coated cartridges were used for the collection of seven aldehydes. Air-exchange rates (AERs) were also measured using a perfluorocarbon tracer gas method. The AERs were lower in the winter in both cities, averaging 1 h(-1) in NYC and 1.4 h(-1) in LA, compared with 1.8 h(-1) in NYC in the summer and 2.5 h(-1) in LA in the fall. Higher AERs were generally associated with lower indoor-outdoor ratios with significant differences for the compounds with indoor sources, including chloroform, 1,4-dichlorobenzene, and formaldehyde. Using a mass-balance model to account for AER and other housing parameters, effective source emission rates (SER) were calculated for each compound. Based on I/O ratios and source emission rates, VOCs could be divided into: (1). indoor-source-influenced compounds, (2). those with contributions from both indoor and outdoor sources, and (3). those with mostly outdoor sources. Significant indoor sources were found for the following six compounds (mean emission rates presented): chloroform (0.11 mg/h), 1,4-dichlorobenzene (19 mg/h), formaldehyde (5 mg/h), acetaldehyde (2 mg/h), benzaldehyde (0.6 mg/h), and hexaldehyde (2 mg/h). Although chloroform had variable I/O ratios across seasons, SERs, which accounted for AER, were similar in both cities for both seasons (e.g., LA means 0.12 and 0.11 mg/h in winter and fall, respectively). Formaldehyde had substantially higher indoor emission rates in the summer in NYC compared to winter (3.8 vs. 1.6 mg/h) but lower in the fall in LA compared to winter (4.3 vs. 5.0 mg/h). Uncertainty analysis determined that source strength calculations were not sensitive to measurement error for a subset of homes in LA.

Winter indoor air pollution in Alaska: identifying a myth

The benzene and toluene levels inside three homes with attached garages were measured for 12 consecutive weeks during the winter months in Fairbanks, Alaska (Latitude 64.5 degrees N). Results for air samples collected over 12 h for the homes showed indoor benzene mixing ratios ranging from 1.6 to 20.4 parts per billion of mixing ratio volume (ppbv), and toluene air mixing ratios ranging from 7.3 to 41.6 ppbv. A correlation between benzene and toluene levels in each home and similar regression lines suggested the same major emission source, car and small equipment gasoline, present in attached garages. In one home, there was a correlation between indoor benzene mixing ratios and the urinary biomarker, trans,trans-muconic acid. Inside, air mixing ratios of benzene and toluene decreased with decreasing outside temperature in all homes studied, even though homes were relatively tight to prevent heat loss during this period of low winter outdoor temperatures. It is suggested that buildup of these pollutants indoors is prevented by the influence of an increased indoor/outdoor temperature differential and an ensuing increase in home ventilation.

Toxicology and human health effects following exposure to oxygenated or reformulated gasoline

In order to replace antiknock leaded derivatives in gasoline, legislations were enacted in the United States and other countries to find safer additives and to reduce CO, O3, and volatile organic compounds (VOCs) in non-attainment areas. Oxygenates commonly used include various alcohols and aliphatic ethers. Methyl tert-butyl ether (MTBE) is the most widely used and studied ether oxygenate and is added to gasoline at concentrations up to 15% by volume. Inhalation of fumes while fueling automobiles is the main source of human exposure to MTBE. Humans are also exposed when drinking water contaminated with MTBE. Epidemiological, clinical, animal, metabolic and kinetic studies have been carried out to address human health risks resulting from exposure to MTBE. MTBE is an animal carcinogen, but its human carcinogenic potential remains unclear. Because MTBE functions as a non-traditional genotoxicant, several mechanisms were suggested to explain its mode of action, such as, functioning as a cytotoxic as opposed to a mitogenic agent; involvement of hormonal mechanisms; or operating as a promoter instead of being a complete carcinogen. Some studies suggested that carcinogenicity of MTBE might be due to its two main metabolites, formaldehyde or tributanol. A role for DNA repair in MTBE carcinogenesis was recently unveiled, which explains some, but not all effects. The totality of the evidence shows that, for the majority of the non-occupationally exposed human population, MTBE is unlikely to produce lasting adverse health effects, and may in some cases improve health by reducing the composition of emitted harmful VOCs and other substances. A small segment of the population (e.g. asthmatic children, the elderly, and those with immunodeficiency) may be at increased risk for toxicity. However, no studies have been conducted to investigate this hypothesis. Concern over ground and surface water contamination caused by persistent MTBE has lead the Environmental Protection Agency (EPA) to proposed reducing or eliminating its use as a gasoline additive. The major potential alternatives to MTBE are other forms of ethers such as ethyl tert-butyl ether (ETBE) or tert-amyl methyl ether (TAME), and alcohols such as ethanol. More definitive studies are needed to understand the mechanism(s) by which aliphatic ethers may pose health and environmental impacts. The switch from MTBE to ethanol is not without problems. Ethanol costs more to produce, poses challenges to the gasoline distribution system, extends the spread of hydrocarbons through ground water in gasoline plumes, and in the short-term is unlikely to be available in sufficient quantity. Moreover, its metabolite acetaldehyde is a possible carcinogen that undergoes a photochemical reaction in the atmosphere to produce the respiratory irritant peroxylacetate nitrate (PAN). Congress is addressing whether the Clean Air Act Amendments (CAA) provisions concerning reformulated gasoline (RFG) should be modified to allow refineries to discontinue or lessen the use of oxygenates.

Neurobehavioral toxicity

A growing number of agents are known to perturb one or more of the interconnected processes of the central nervous system. At the same time, there is an increase in the incidence of neurobehavioral disorders that are confronting clinicians with baffling symptoms and presentations that seem uncommon. Fundamental to the assessment of the environmental-relatedness of the syndromes is a work and exposure history, including information different from that routinely obtained in the clinical setting. Exposure examples are described to suggest the scope of inquiry necessary to differentiate neurotoxic syndromes from nonneurotoxic illness.

Mutagenicity studies of methyl-tert-butylether using the Ames tester strain TA102

Methyl-tert-butylether (MTBE) is an oxygenate widely used in the United States as a motor vehicle fuel additive to reduce emissions and as an octane booster [National Research Council, Toxicological and Performance Aspects of Oxygenated Motor Vehicle Fules, National Academy Press, Washington, DC, 1996]. But it is the potential for MTBE to enter drinking water supplies that has become an area of public concern. MTBE has been shown to induce liver and kidney tumors in rodents but the biochemical process leading to carcinogenesis is unknown. MTBE was previously shown to be non-mutagenic in the standard Ames plate incorporation test with tester strains that detect frame shift (TA98) and point mutations (TA100) and in a suspension assay using TA104, a strain that detects oxidative damage, suggesting a non-genotoxic mechanism accounts for its carcinogenic potential. These strains are deficient in excision repair due to deletion of the uvrB gene. We hypothesized that the carcinogenic activity of MTBE may be dependent upon a functional excision repair system that attempts to remove alkyl adducts and/or oxidative base damage caused by direct interaction of MTBE with DNA or by its metabolites, formaldehyde and tert-butyl alcohol (TBA), established carcinogens that are mutagenic in some Ames strains. To test our hypothesis, the genotoxicity of MTBE-induced DNA alterations was assayed using the standard Ames test with TA102, a strain similar to TA104 in the damage it detects but uvrB + and, therefore, excision repair proficient. The assay was performed (1) with and without Aroclor-induced rat S-9, (2) with and without the addition of formaldehyde dehydrogenase (FDH), and (3) with human S-9 homogenate. MTBE was weakly mutagenic when tested directly and moderately mutagenic with S-9 activation producing between 80 and 200 TA102 revertants/mg of compound. Mutagenicity was inhibited 25%-30% by FDH. TA102 revertants were also induced by TBA and by MTBE when human S-9 was substituted for rat S-9. We conclude that MTBE and its metabolites induce a mutagenic pathway involving oxidation of DNA bases and an intact repair system. These data are significant in view of the controversy surrounding public safety and the environmental release of MTBE and similar fuel additives.