Far-field optical nanoscopy with reduced number of state transition cycles

Live-cell imaging powered by computation

The proliferation of microscopy methods for live-cell imaging offers many new possibilities for users but can also be challenging to navigate. The prevailing challenge in live-cell fluorescence microscopy is capturing intra-cellular dynamics while preserving cell viability. Computational methods can help to address this challenge and are now shifting the boundaries of what is possible to capture in living systems. In this Review, we discuss these computational methods focusing on artificial intelligence-based approaches that can be layered on top of commonly used existing microscopies as well as hybrid methods that integrate computation and microscope hardware. We specifically discuss how computational approaches can improve the signal-to-noise ratio, spatial resolution, temporal resolution and multi-colour capacity of live-cell imaging.

Molecular mechanism of GPCR spatial organization at the plasma membrane

G-protein-coupled receptors (GPCRs) mediate many critical physiological processes. Their spatial organization in plasma membrane (PM) domains is believed to encode signaling specificity and efficiency. However, the existence of domains and, crucially, the mechanism of formation of such putative domains remain elusive. Here, live-cell imaging (corrected for topography-induced imaging artifacts) conclusively established the existence of PM domains for GPCRs. Paradoxically, energetic coupling to extremely shallow PM curvature (<1 µm-1) emerged as the dominant, necessary and sufficient molecular mechanism of GPCR spatiotemporal organization. Experiments with different GPCRs, H-Ras, Piezo1 and epidermal growth factor receptor, suggest that the mechanism is general, yet protein specific, and can be regulated by ligands. These findings delineate a new spatiomechanical molecular mechanism that can transduce to domain-based signaling any mechanical or chemical stimulus that affects the morphology of the PM and suggest innovative therapeutic strategies targeting cellular shape.

Pushing the Resolution Limit of Stimulated Emission Depletion Optical Nanoscopy

Optical nanoscopy, also known as super-resolution optical microscopy, has provided scientists with the means to surpass the diffraction limit of light microscopy and attain new insights into nanoscopic structures and processes that were previously inaccessible. In recent decades, numerous studies have endeavored to enhance super-resolution microscopy in terms of its spatial (lateral) resolution, axial resolution, and temporal resolution. In this review, we discuss recent efforts to push the resolution limit of stimulated emission depletion (STED) optical nanoscopy across multiple dimensions, including lateral resolution, axial resolution, temporal resolution, and labeling precision. We introduce promising techniques and methodologies building on the STED concept that have emerged in the field, such as MINSTED, isotropic STED, and event-triggered STED, and evaluate their respective strengths and limitations. Moreover, we discuss trade-off relationships that exist in far-field optical microscopy and how they come about in STED optical nanoscopy. By examining the latest developments addressing these aspects, we aim to provide an updated overview of the current state of STED nanoscopy and its potential for future research.

Dense 4D nanoscale reconstruction of living brain tissue

Three-dimensional (3D) reconstruction of living brain tissue down to an individual synapse level would create opportunities for decoding the dynamics and structure-function relationships of the brain's complex and dense information processing network; however, this has been hindered by insufficient 3D resolution, inadequate signal-to-noise ratio and prohibitive light burden in optical imaging, whereas electron microscopy is inherently static. Here we solved these challenges by developing an integrated optical/machine-learning technology, LIONESS (live information-optimized nanoscopy enabling saturated segmentation). This leverages optical modifications to stimulated emission depletion microscopy in comprehensively, extracellularly labeled tissue and previous information on sample structure via machine learning to simultaneously achieve isotropic super-resolution, high signal-to-noise ratio and compatibility with living tissue. This allows dense deep-learning-based instance segmentation and 3D reconstruction at a synapse level, incorporating molecular, activity and morphodynamic information. LIONESS opens up avenues for studying the dynamic functional (nano-)architecture of living brain tissue.

Deep learning enables fast, gentle STED microscopy

STED microscopy is widely used to image subcellular structures with super-resolution. Here, we report that restoring STED images with deep learning can mitigate photobleaching and photodamage by reducing the pixel dwell time by one or two orders of magnitude. Our method allows for efficient and robust restoration of noisy 2D and 3D STED images with multiple targets and facilitates long-term imaging of mitochondrial dynamics.

Fluorescence-based super-resolution-microscopy strategies for chromatin studies

Super-resolution microscopy (SRM) is a prime tool to study chromatin organisation at near biomolecular resolution in the native cellular environment. With fluorescent labels DNA, chromatin-associated proteins and specific epigenetic states can be identified with high molecular specificity. The aim of this review is to introduce the field of diffraction-unlimited SRM to enable an informed selection of the most suitable SRM method for a specific chromatin-related research question. We will explain both diffraction-unlimited approaches (coordinate-targeted and stochastic-localisation-based) and list their characteristic spatio-temporal resolutions, live-cell compatibility, image-processing, and ability for multi-colour imaging. As the increase in resolution, compared to, e.g. confocal microscopy, leads to a central role of the sample quality, important considerations for sample preparation and concrete examples of labelling strategies applicable to chromatin research are discussed. To illustrate how SRM-based methods can significantly improve our understanding of chromatin functioning, and to serve as an inspiring starting point for future work, we conclude with examples of recent applications of SRM in chromatin research.

Super-resolution microscopy and studies of peroxisomes

Fluorescence microscopy is an important tool for studying cellular structures such as organelles. Unfortunately, many details in the corresponding images are hidden due to the resolution limit of conventional lens-based far-field microscopy. An example is the study of peroxisomes, where important processes such as molecular organization during protein important can simply not be studied with conventional far-field microscopy methods. A remedy is super-resolution fluorescence microscopy, which is nowadays a well-established technique for the investigation of inner-cellular structures but has so far to a lesser extent been applied to the study of peroxisomes. To help advancing the latter, we here give an overview over the different super-resolution microscopy approaches and their potentials and challenges in cell-biological research, including labelling issues and a focus on studies on peroxisomes. Here, we also highlight experiments beyond simple imaging such as observations of diffusion dynamics of peroxisomal proteins.

Temperature-responsive and biocompatible nanocarriers based on clay nanotubes for controlled anti-cancer drug release

Administration of temperature-responsive drug carriers that release anticancer drugs at high temperatures can benefit hyperthermia therapies because of the synergistic effect of anticancer drug molecules and high temperature on killing the cancer cells. In this study, we design and characterize a new temperature-responsive nanocarrier based on a naturally occurring and biocompatible clay mineral, halloysite nanotubes. Poly(N-isopropylacrylamide) brushes were grown on the surface of halloysite nanotubes using a combination of mussel-inspired dopamine polymerization and surface-initiated atom transfer radical polymerization. The chemical structure of the hybrid materials was investigated using X-ray photoelectron spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The hybrid material was shown to have a phase transition temperature of about 32 °C, corresponding to a 40 nm thick polymer layer surrounding the nanotubes. Cell studies suggested that grafting of poly(N-isopropylacrylamide) brushes on the polydopamine-modified halloysite nanotubes suppresses the cytotoxicity caused by the polydopamine interlayer and drug release studies on nanotubes loaded with doxorubicin showed that thanks to the poly(N-isopropylacrylamide) brushes a temperature-dependent drug release is observed. Finally, a fluorescent dye molecule was covalently attached to the polymer-grafted nanotubes and stimulated emission depletion nanoscopy was used to confirm the internalization of the nanotubes in HeLa cells.

Piezo1 as a force-through-membrane sensor in red blood cells

Piezo1 is the stretch activated Ca2+ channel in red blood cells that mediates homeostatic volume control. Here, we study the organization of Piezo1 in red blood cells using a combination of super-resolution microscopy techniques and electron microscopy. Piezo1 adopts a non-uniform distribution on the red blood cell surface, with a bias toward the biconcave 'dimple'. Trajectories of diffusing Piezo1 molecules, which exhibit confined Brownian diffusion on short timescales and hopping on long timescales, also reflect a bias toward the dimple. This bias can be explained by 'curvature coupling' between the intrinsic curvature of the Piezo dome and the curvature of the red blood cell membrane. Piezo1 does not form clusters with itself, nor does it colocalize with F-actin, Spectrin, or the Gardos channel. Thus, Piezo1 exhibits the properties of a force-through-membrane sensor of curvature and lateral tension in the red blood cell.

Focus image scanning microscopy for sharp and gentle super-resolved microscopy

To date, the feasibility of super-resolution microscopy for imaging live and thick samples is still limited. Stimulated emission depletion (STED) microscopy requires high-intensity illumination to achieve sub-diffraction resolution, potentially introducing photodamage to live specimens. Moreover, the out-of-focus background may degrade the signal stemming from the focal plane. Here, we propose a new method to mitigate these limitations without drawbacks. First, we enhance a STED microscope with a detector array, enabling image scanning microscopy (ISM). Therefore, we implement STED-ISM, a method that exploits the working principle of ISM to reduce the depletion intensity and achieve a target resolution. Later, we develop Focus-ISM, a strategy to improve the optical sectioning and remove the background of any ISM-based imaging technique, with or without a STED beam. The proposed approach requires minimal architectural changes to a conventional microscope but provides substantial advantages for live and thick sample imaging.

In vivo super-resolution of the brain - How to visualize the hidden nanoplasticity?

Super-resolution fluorescence microscopy has entered most biological laboratories worldwide and its benefit is undisputable. Its application to brain imaging, for example in living mice, enables the study of sub-cellular structural plasticity and brain function directly in a living mammal. The demands of brain imaging on the different super-resolution microscopy techniques (STED, RESOLFT, SIM, ISM) and labeling strategies are discussed here as well as the challenges of the required cranial window preparation. Applications of super-resolution in the anesthetized mouse brain enlighten the stability and plasticity of synaptic nanostructures. These studies show the potential of in vivo super-resolution imaging and justify its application more widely in vivo to investigate the role of nanostructures in memory and learning.

Optimizing sampling for surface localization in 3D-scanning microscopy

3D-scanning fluorescence imaging of living tissue is in demand for less phototoxic acquisition process. For the imaging of biological surfaces, adaptive and sparse scanning schemes have been proven to efficiently reduce the light dose by concentrating acquisitions around the surface. In this paper, we focus on optimizing the scanning scheme at a constant photon budget, when the problem is to estimate the position of a biological surface whose intensity profile is modeled as a Gaussian shape. We propose an approach based on the Cramér-Rao bound to optimize the positions and number of scanning points, assuming signal-dependant Gaussian noise. We show that, in the case of regular sampling, the optimization problem can be reduced to a few parameters, allowing us to define quasi-optimal acquisition strategies, first when no prior knowledge of the surface location is available and then when the user has a prior on this location.

Blood Cell Analysis: From Traditional Methods to Super-Resolution Microscopy

Blood cell analysis is essential for the diagnosis and identification of hematological malignancies. The use of digital microscopy systems has been extended in clinical laboratories. Super-resolution microscopy (SRM) has attracted wide attention in the medical field due to its nanoscale spatial resolution and high sensitivity. It is considered to be a potential method of blood cell analysis that may have more advantages than traditional approaches such as conventional optical microscopy and hematology analyzers in certain examination projects. In this review, we firstly summarize several common blood cell analysis technologies in the clinic, and analyze the advantages and disadvantages of these technologies. Then, we focus on the basic principles and characteristics of three representative SRM techniques, as well as the latest advances in these techniques for blood cell analysis. Finally, we discuss the developmental trend and possible research directions of SRM, and provide some discussions on further development of technologies for blood cell analysis.

WASP integrates substrate topology and cell polarity to guide neutrophil migration

To control their movement, cells need to coordinate actin assembly with the geometric features of their substrate. Here, we uncover a role for the actin regulator WASP in the 3D migration of neutrophils. We show that WASP responds to substrate topology by enriching to sites of inward, substrate-induced membrane deformation. Superresolution imaging reveals that WASP preferentially enriches to the necks of these substrate-induced invaginations, a distribution that could support substrate pinching. WASP facilitates recruitment of the Arp2/3 complex to these sites, stimulating local actin assembly that couples substrate features with the cytoskeleton. Surprisingly, WASP only enriches to membrane deformations in the front half of the cell, within a permissive zone set by WASP's front-biased regulator Cdc42. While WASP KO cells exhibit relatively normal migration on flat substrates, they are defective at topology-directed migration. Our data suggest that WASP integrates substrate topology with cell polarity by selectively polymerizing actin around substrate-induced membrane deformations in the front half of the cell.

Technological advances in super-resolution microscopy to study cellular processes

Since its initial demonstration in 2000, far-field super-resolution light microscopy has undergone tremendous technological developments. In parallel, these developments have opened a new window into visualizing the inner life of cells at unprecedented levels of detail. Here, we review the technical details behind the most common implementations of super-resolution microscopy and highlight some of the recent, promising advances in this field.

ISM-assisted tomographic STED microscopy

Stimulated emission depletion (STED) microscopy theoretically provides unlimited resolution. However, in practice the achievable resolution in biological samples is essentially limited by photobleaching. One method which overcomes this problem is tomographic STED (tomoSTED) microscopy. In tomoSTED microscopy, one-dimensional depletion patterns facing in different directions are successively applied in order to acquire a highly-resolved image in two dimensions. In this context, the number of addressed directions depends on the desired angular homogeneity of the point spread function or the optical transfer function and thus on the resolution increase as compared to diffraction-limited imaging. At a reasonable angular homogeneity the light dose and thus bleaching can be reduced, as compared to conventional STED microscopy. Here, we propose and demonstrate for the first time, to our knowledge, that the number of required depletion pattern orientations can be reduced by combining tomoSTED microscopy with the concept of image scanning microscopy (ISM). With our realization of an ISM-tomoSTED microscope, we show that approximately a factor of 2 lower number of orientations are required to achieve the same resolution and image quality as in tomoSTED microscopy.

Fluorescent Probes for STED Optical Nanoscopy

Progress in developing fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, is inseparable from the advancement in optical fluorescence microscopy. Super-resolution microscopy, or optical nanoscopy, overcame the far-field optical resolution limit, known as Abbe's diffraction limit, by taking advantage of the photophysical properties of fluorescent probes. Therefore, fluorescent probes for super-resolution microscopy should meet the new requirements in the probes' photophysical and photochemical properties. STED optical nanoscopy achieves super-resolution by depleting excited fluorophores at the periphery of an excitation laser beam using a depletion beam with a hollow core. An ideal fluorescent probe for STED nanoscopy must meet specific photophysical and photochemical properties, including high photostability, depletability at the depletion wavelength, low adverse excitability, and biocompatibility. This review introduces the requirements of fluorescent probes for STED nanoscopy and discusses the recent progress in the development of fluorescent probes, such as fluorescent proteins, organic dyes, and fluorescent nanoparticles, for the STED nanoscopy. The strengths and the limitations of the fluorescent probes are analyzed in detail.

Super-resolving Microscopy in Neuroscience

Fluorescence imaging techniques play a pivotal role in our understanding of the nervous system. The emergence of various super-resolution microscopy methods and specialized fluorescent probes enables direct insight into neuronal structure and protein arrangements in cellular subcompartments with so far unmatched resolution. Super-resolving visualization techniques in neurons unveil a novel understanding of cytoskeletal composition, distribution, motility, and signaling of membrane proteins, subsynaptic structure and function, and neuron-glia interaction. Well-defined molecular targets in autoimmune and neurodegenerative disease models provide excellent starting points for in-depth investigation of disease pathophysiology using novel and innovative imaging methodology. Application of super-resolution microscopy in human brain samples and for testing clinical biomarkers is still in its infancy but opens new opportunities for translational research in neurology and neuroscience. In this review, we describe how super-resolving microscopy has improved our understanding of neuronal and brain function and dysfunction in the last two decades.

An adaptive microscope for the imaging of biological surfaces

Scanning fluorescence microscopes are now able to image large biological samples at high spatial and temporal resolution. This comes at the expense of an increased light dose which is detrimental to fluorophore stability and cell physiology. To highly reduce the light dose, we designed an adaptive scanning fluorescence microscope with a scanning scheme optimized for the unsupervised imaging of cell sheets, which underly the shape of many embryos and organs. The surface of the tissue is first delineated from the acquisition of a very small subset (~0.1%) of sample space, using a robust estimation strategy. Two alternative scanning strategies are then proposed to image the tissue with an improved photon budget, without loss in resolution. The first strategy consists in scanning only a thin shell around the estimated surface of interest, allowing high reduction of light dose when the tissue is curved. The second strategy applies when structures of interest lie at the cell periphery (e.g. adherens junctions). An iterative approach is then used to propagate scanning along cell contours. We demonstrate the benefit of our approach imaging live epithelia from Drosophila melanogaster. On the examples shown, both approaches yield more than a 20-fold reduction in light dose -and up to more than 80-fold- compared to a full scan of the volume. These smart-scanning strategies can be easily implemented on most scanning fluorescent imaging modality. The dramatic reduction in light exposure of the sample should allow prolonged imaging of the live processes under investigation.

Co-chaperone involvement in knob biogenesis implicates host-derived chaperones in malaria virulence

The pathology associated with malaria infection is largely due to the ability of infected human RBCs to adhere to a number of receptors on endothelial cells within tissues and organs. This phenomenon is driven by the export of parasite-encoded proteins to the host cell, the exact function of many of which is still unknown. Here we inactivate the function of one of these exported proteins, PFA66, a member of the J-domain protein family. Although parasites lacking this protein were still able to grow in cell culture, we observed severe defects in normal host cell modification, including aberrant morphology of surface knobs, disrupted presentation of the cytoadherence molecule PfEMP1, and a total lack of cytoadherence, despite the presence of the knob associated protein KAHRP. Complementation assays demonstrate that an intact J-domain is required for recovery to a wild-type phenotype and suggest that PFA66 functions in concert with a HSP70 to carry out host cell modification. Strikingly, this HSP70 is likely to be of host origin. ATPase assays on recombinant protein verify a functional interaction between PFA66 and residual host cell HSP70. Taken together, our data reveal a role for PFA66 in host cell modification, strongly implicate human HSP70s as being essential in this process and uncover a new KAHRP-independent molecular factor required for correct knob biogenesis.

To survive in the human body, the malaria parasite invades and lives within human red blood cells. Once within the red blood cell, the parasite renovates the host cell to its own needs. Here we have studied which factors from both parasite and host cell are required for this renovation process, and discover that human chaperone proteins, referred to as HSP70, are required. It appears that a particular parasite-derived protein, PFA66, recruits and modifies the function of the human HSP70. As this interaction between a parasite and human protein is novel and essential for parasite survival, our study identifies a potential Achilles’ Heel which may be targeted for development of new anti-malaria therapies.

Triple-Color STED Nanoscopy: Sampling Absorption Spectra Differences for Efficient Linear Species Unmixing

Stimulated emission depletion (STED) in confocal fluorescence microscopy enables a visualization of biological structures within cells far below the optical diffraction limit. To meet the demand in the field for simultaneous investigations of multiple species within a cell, a couple of different STED techniques have been proposed, each with their own challenges. By systemically exploiting spectral differences in the absorption of fluorescent labels, we present a novel, beneficial approach to multispecies STED nanoscopy. By using three excitation wavelengths in nanosecond pulsed interleaved excitation (PIE) mode, we probe quasi simultaneously multiple species with fluorescent labels having absorption maxima as close as 13 nm. The acquired image is decomposed into its single species contributions by application of a linear unmixing algorithm based on present reference patterns. For multispecies images containing single species regions, we introduce the image correlation map (ICM). Here, the single species regions easily can be identified in order to generate the necessary single species reference patterns. This avoids the otherwise cumbersome and artifact prone preparation and recording of additional reference samples. The power of the proposed imaging scheme persists in species separation quality at high speed shown for up to three species with established reference samples and dyes commonly used for cellular STED imaging.

Cumulative effects of photobleaching in volumetric STED imaging-artefacts and possible benefits

In stimulated emission depletion (STED) imaging, the excitation and depletion laser beams extend well beyond the focal plane in the imaged sample. We investigated how photobleaching resulting from this irradiation can affect STED images, by acquiring 3D images of fluorescent polystyrene beads using a 2D STED microscope, and applying different Z pixel sizes, scanning speeds, resulting in different laser light doses. While higher STED beam irradiances can increase the spatial resolution, they can also significantly increase photobleaching and thereby reduce signal-to-background levels. In 2D STED imaging, based on a single scan within the focal plane, scan parameters can often be selected to avoid photobleaching effects. Upon 3D optical sectioning experiments however, using the same scan parameters, additional cumulative effects of photobleaching may appear, due to the extension of the excitation and depletion laser beams beyond the focal planes being scanned. Apart from a reduction in signal-to-background levels, such photobleaching can lead to an apparent shift of the axial localization of the objects in the images, but also to an increased resolution in the axial dimension. These findings, confirmed by simulations based on a simplified model for photobleaching, suggests some caution in volumetric STED imaging experiments, but also a possibility for enhanced axial resolution in such experiments.

Super-resolution RESOLFT microscopy of lipid bilayers using a fluorophore-switch dyad

Dyads consisting of a photochromic switch covalently linked to a fluorescent dye allow the emission from the dye to be controlled by reversible photoisomerization of the switch; one form of the switch quenches fluorescence by accepting energy from the dye. Here we investigate the use of dyads of this type for super-resolution imaging of lipid bilayers. Giant unilamellar vesicles stained with the dyads were imaged with about a two-fold resolution-enhancement compared with conventional confocal microscopy. This was achieved by exciting the fluorophore at 594 nm, using a switch activated by violet and red light (405/640 nm).

Tomographic STED microscopy

Stimulated emission depletion (STED) microscopy is a versatile imaging method with diffraction-unlimited resolution. Here, we present a novel STED microscopy variant that achieves either increased resolution at equal laser power or identical super-resolution conditions at significantly lower laser power when compared to the classical implementation. By applying a one-dimensional depletion pattern instead of the well-known doughnut-shaped STED focus, a more efficient depletion is achieved, thereby necessitating less STED laser power to achieve identical resolution. A two-dimensional resolution increase is obtained by recording a sequence of images with different high-resolution directions. This corresponds to a collection of tomographic projections within diffraction-limited spots, an approach that so far has not been explored in super-resolution microscopy. Via appropriate reconstruction algorithms, our method also provides an opportunity to speed up the acquisition process. Both aspects, the necessity of less STED laser power and the feasibility to decrease the recording time, have the potential to reduce photo-bleaching as well as sample damage drastically.

Between life and death: strategies to reduce phototoxicity in super-resolution microscopy

Super-resolution microscopy (SRM) enables non-invasive, molecule-specific imaging of the internal structure and dynamics of cells with sub-diffraction limit spatial resolution. One of its major limitations is the requirement for high-intensity illumination, generating considerable cellular phototoxicity. This factor considerably limits the capacity for live-cell observations, particularly for extended periods of time. Here, we give an overview of new developments in hardware, software and probe chemistry aiming to reduce phototoxicity. Additionally, we discuss how the choice of biological model and sample environment impacts the capacity for live-cell observations.

Pixel hopping enables fast STED nanoscopy at low light dose

The achievable image quality in fluorescence microscopy and nanoscopy is usually limited by photobleaching. Reducing the light dose imposed on the sample is thus a challenge for all these imaging techniques. Various approaches like CLEM, RESCue, MINFIELD, DyMIN and smart RESOLFT have been presented in the last years and have proven to significantly reduce the required light dose in diffraction-limited as well as super-resolution imaging, thus resulting in less photobleaching and phototoxicity. None of these methods has so far been able to transfer the light dose reduction into a faster recording at pixel dwell times of a few ten microseconds. By implementing a scan system with low latency and large field of view we could directly convert the light dose reduction of RESCue into a shorter acquisition time for STED nanoscopy. In this way, FastRESCue speeds up the acquisition locally up to 10-fold and allows overall for a 5 times faster acquisition at only 20% of the light dose in biological samples.

Strategies to maximize performance in STimulated Emission Depletion (STED) nanoscopy of biological specimens

Super-resolution fluorescence microscopy has become an important catalyst for discovery in the life sciences. In STimulated Emission Depletion (STED) microscopy, a pattern of light drives fluorophores from a signal-emitting on-state to a non-signalling off-state. Only emitters residing in a sub-diffraction volume around an intensity minimum are allowed to fluoresce, rendering them distinguishable from the nearby, but dark fluorophores. STED routinely achieves resolution in the few tens of nanometers range in biological samples and is suitable for live imaging. Here, we review the working principle of STED and provide general guidelines for successful STED imaging. The strive for ever higher resolution comes at the cost of increased light burden. We discuss techniques to reduce light exposure and mitigate its detrimental effects on the specimen. These include specialized illumination strategies as well as protecting fluorophores from photobleaching mediated by high-intensity STED light. This opens up the prospect of volumetric imaging in living cells and tissues with diffraction-unlimited resolution in all three spatial dimensions.

Fight against background noise in stimulated emission depletion nanoscopy

STimulated emission depletion (STED) nanoscopy has been proposed to extend greatly our capability of using light to study a variety of biological problems with nanometer-scale resolution. However, in practice the unwanted background noise degrades the STED image quality and precludes quantitative analysis. Here, we discuss the underlying sources of the background noise in STED images, and review current approaches to alleviate this problem, such as time-gating, anti-Stokes excitation removal, and off-focus incomplete depletion suppression. Progress in correcting uncorrelated background photons in fluorescence correlation spectroscopy combined with STED (STED-FCS) will also be discussed.

Increasing Resolution in Live Cell Microscopy by Structured Illumination (SIM)

In the context of various approaches to super-resolution microscopy, structured illumination microscopy (SIM) offers several advantages: it needs rather low light doses (with a low risk of phototoxicity or photobleaching), is comparably fast and flexible concerning the use of microscopes, objective lenses and cameras, and has potential for 3D imaging. This paper describes an experimental setup for SIM with first diffraction orders of a spectral light modulator (SLM) creating an interference pattern in two dimensions. We kept this system rather compact with a comparably large illuminated object field, validated it with nano-beads and applied it further to living cells for imaging the cytoskeleton, mitochondria or cell nuclei with a resolution slightly above 100 nm. Its advantages, challenges and limitations—concerning cameras, acquisition time, depth of imaging, light exposure, and combining it with further super-resolving methods—are discussed.

Guided STED nanoscopy enables super-resolution imaging of blood stage malaria parasites

Malaria remains a major burden world-wide, but the disease-causing parasites from the genus Plasmodium are difficult to study in vitro. Owing to the small size of the parasites, subcellular imaging poses a major challenge and the use of super-resolution techniques has been hindered by the parasites' sensitivity to light. This is particularly apparent during the blood-stage of the Plasmodium life cycle, which presents an important target for drug research. The iron-rich food vacuole of the parasite undergoes disintegration when illuminated with high-power lasers such as those required for high resolution in Stimulated Emission Depletion (STED) microscopy. This causes major damage to the sample precluding the use of this super-resolution technique. Here we present guided STED, a novel adaptive illumination (AI) STED approach, which takes advantage of the highly-reflective nature of the iron deposit in the cell to identify the most light-sensitive parts of the sample. Specifically in these parts, the high-power STED laser is deactivated automatically to prevent local damage. Guided STED nanoscopy finally allows super-resolution imaging of the whole Plasmodium life cycle, enabling multicolour imaging of blood-stage malaria parasites with resolutions down to 35 nm without sample destruction.

Smart scanning for low-illumination and fast RESOLFT nanoscopy in vivo

RESOLFT fluorescence nanoscopy can nowadays image details far beyond the diffraction limit. However, signal to noise ratio (SNR) and temporal resolution are still a concern, especially deep inside living cells and organisms. In this work, we developed a non-deterministic scanning approach based on a real-time feedback system which speeds up the acquisition up to 6-fold and decreases the light dose by 70–90% for in vivo imaging. Also, we extended the information content of the images by acquiring the complete temporal evolution of the fluorescence generated by reversible switchable fluorescent proteins. This generates a series of images with different spatial resolution and SNR, from conventional to RESOLFT images, which combined through a multi-image deconvolution algorithm further enhances the effective resolution. We reported nanoscale imaging of organelles up to 35 Hz and actin dynamics during an invasion process at a depth of 20–30 µm inside a living Caenorhabditis elegans worm.

Long acquisition time and high illumination intensities needed in super-resolution imaging often generate photobleaching and phototoxicity. Here the authors develop a non-deterministic scanning approach based on a real-time feedback system that enables faster acquisition with lower light doses for in vivo imaging.

HIV-1 nuclear import in macrophages is regulated by CPSF6-capsid interactions at the nuclear pore complex

Nuclear entry of HIV-1 replication complexes through intact nuclear pore complexes is critical for successful infection. The host protein cleavage-and-polyadenylation-specificity-factor-6 (CPSF6) has been implicated in different stages of early HIV-1 replication. Applying quantitative microscopy of HIV-1 reverse-transcription and pre-integration-complexes (RTC/PIC), we show that CPSF6 is strongly recruited to nuclear replication complexes but absent from cytoplasmic RTC/PIC in primary human macrophages. Depletion of CPSF6 or lack of CPSF6 binding led to accumulation of HIV-1 subviral complexes at the nuclear envelope of macrophages and reduced infectivity. Two-color stimulated-emission-depletion microscopy indicated that under these circumstances HIV-1 complexes are retained inside the nuclear pore and undergo CA-multimer dependent CPSF6 clustering adjacent to the nuclear basket. We propose that nuclear entry of HIV-1 subviral complexes in macrophages is mediated by consecutive binding of Nup153 and CPSF6 to the hexameric CA lattice.

Viruses are miniscule parasites that hijack the resources of a cell to make more of themselves. For many, this involves getting inside the nucleus, the fortress that protects the cell’s genetic information. To do so, viruses need to first find a way through a double-layered membrane called the nuclear envelope, which only opens up when a cell divides.

Yet, the human immunodeficiency virus type 1 (HIV-1) can infect cells that no longer divide, and in which the nucleus’ walls never come down. The virus cores then head for the nuclear pores, heavily guarded holes in the nuclear envelope that allow the cell's own molecules to go in and out of the nucleus. But HIV-1 is too big to fit through, as its genetic information is encased in a capsid, a coat made of a complex assembly of proteins. However, research shows that these capsid proteins can bind to host proteins at the pore or even inside the nucleus. For example, the capsid protein can recognize the pore protein Nup153, or the nuclear protein CPSF6. These interactions could help the virus make its way in, but how these events unfold is still unclear.

To explore this, Bejarano, Peng et al. attached fluorescent labels to HIV-1 and watched as it infected non-dividing cells. Rather than completely get rid of their capsid before they crossed the pores, the virus particles hung on to a large part of their lattice. This remaining coat then attached to CPSF6; when this protein was missing or could not bind to capsid proteins, the viral complexes got stuck in the nuclear pores. This suggests that the capsid lattice could first interact with Nup153 inside the pores: then, CPSF6 would take over, knocking Nup153 away and pulling HIV-1 into the nucleus.

Armed with this knowledge, virologists and drug developers could try to block HIV-1 from entering the cell’s nucleus; they could also start to dissect how drugs that target the HIV-1 capsid work. Ultimately, HIV-1 may serve as a model to unravel how large objects can pass the nuclear pore, which may help us understand how molecules are constantly trafficked in and out of the nucleus.

Enhancement of fluorescence emission difference microscopy using conjugated vortex phase modulation

In this paper, we propose and demonstrate an improved fluorescence emission difference microscopy (FED) method, exploiting programmable phase modulation for image enhancement. The main novelty of the proposed approach lies in the matched size and intensity of two excitation spots. The proposed method improves the FED performance on image quality via artefact elimination. We demonstrate the feasibility of this method through theoretical studies and experimental tests. The experimental results of nanobeads and cells validate the practical performance of this method, which can enable reliable observations at superresolution in biomedical studies. LAY DESCRIPTION: In this paper, we propose a method to improve the imaging quality of regular fluorescence emission difference (FED) microscopy. In regular FED imaging, a solid and a doughnut excitation beam are successively used to acquire two images which are then subtracted with each other to improve the resolution of confocal microscopy. The doughnut beam can be generated by modulating the excitation beam with a vortex phase mask. Note that both of the excitation beam and the vortex phase mask must have the same handed direction in regular FED microscopy. However, some negative values may be produced and some information may be lost due to the subtraction process in regular FED imaging, which is mainly caused by the mismatched size and intensity of these two excitation spots. To address this issue, we propose conjugated FED (cFED) microscopy which additionally uses a conjugated vortex phase mask to modulate the solid beam to extend its focal spot size to be matched with the doughnut spot, which means the handed direction of the solid beam and the vortex phase mask is different. Besides, in order not to damage the resolution, the doughnut beam needs to be saturated to some degree. The experiment results show that, at the same resolution level, the negative values and the information loss in cFED image are all less than that of regular FED image.

Correlative Stimulated Emission Depletion and Scanning Ion Conductance Microscopy

Correlation microscopy combining fluorescence and scanning probe or electron microscopy is limited to fixed samples due to the sample preparation and nonphysiological imaging conditions required by most probe or electron microscopy techniques. Among the few scanning probe techniques that allow imaging of living cells under physiological conditions, scanning ion conductance microscopy (SICM) has been shown to be the technique that minimizes the impact on the investigated sample. However, combinations of SICM and fluorescence microscopy suffered from the mismatch in resolution due to the limited resolution of conventional light microscopy. In the last years, the diffraction limit of light microscopy has been circumvented by various techniques, one of which is stimulated emission depletion (STED) microscopy. Here, we aimed at demonstrating the combination of STED and SICM. We show that both methods allow recording a living cellular specimen and provide a SICM and STED image of the same sample, which allowed us to correlate the membrane surface topography and the distribution of the cytoskeletal protein actin. Our proof-of-concept study exemplifies the benefit of correlating SICM with a subdiffraction fluorescence method and might form the basis for the development of a combined instrument that would allow the simultaneous recording of subdiffraction fluorescence and topography information.

Super-resolution fluorescence microscopy studies of human immunodeficiency virus

Super-resolution fluorescence microscopy combines the ability to observe biological processes beyond the diffraction limit of conventional light microscopy with all advantages of the fluorescence readout such as labelling specificity and non-invasive live-cell imaging. Due to their subdiffraction size (< 200 nm) viruses are ideal candidates for super-resolution microscopy studies, and Human Immunodeficiency Virus type 1 (HIV-1) is to date the most studied virus by this technique. This review outlines principles of different super-resolution techniques as well as their advantages and disadvantages for virological studies, especially in the context of live-cell imaging applications. We highlight the findings of super-resolution based HIV-1 studies performed so far, their contributions to the understanding of HIV-1 replication cycle and how the current advances in super-resolution microscopy may open new avenues for future virology research.

3D super-resolution microscopy reflects mitochondrial cristae alternations and mtDNA nucleoid size and distribution

3D super-resolution microscopy based on the direct stochastic optical reconstruction microscopy (dSTORM) with primary Alexa-Fluor-647-conjugated antibodies is a powerful method for accessing changes of objects that could be normally resolved only by electron microscopy. Despite the fact that mitochondrial cristae yet to become resolved, we have indicated changes in cristae width and/or morphology by dSTORM of ATP-synthase F₁ subunit α (F₁α). Obtained 3D images were analyzed with the help of Ripley's K-function modeling spatial patterns or transferring them into distance distribution function. Resulting histograms of distances frequency distribution provide most frequent distances (MFD) between the localized single antibody molecules. In fasting state of model pancreatic β-cells, INS-1E, MFD between F₁α were ~80 nm at 0 and 3 mM glucose, whereas decreased to 61 nm and 57 nm upon glucose-stimulated insulin secretion (GSIS) at 11 mM and 20 mM glucose, respectively. Shorter F₁α interdistances reflected cristae width decrease upon GSIS, since such repositioning of F₁α correlated to average 20 nm and 15 nm cristae width at 0 and 3 mM glucose, and 9 nm or 8 nm after higher glucose simulating GSIS (11, 20 mM glucose, respectively). Also, submitochondrial entities such as nucleoids of mtDNA were resolved e.g. after bromo-deoxyuridine (BrDU) pretreatment using anti-BrDU dSTORM. MFD in distances distribution histograms reflected an average nucleoid diameter (<100 nm) and average distances between nucleoids (~1000 nm). Double channel PALM/dSTORM with Eos-lactamase-β plus anti-TFAM dSTORM confirmed the latter average inter-nucleoid distance. In conclusion, 3D single molecule (dSTORM) microscopy is a reasonable tool for studying mitochondrion.

Recent research on stimulated emission depletion microscopy for reducing photobleaching

Stimulated emission depletion (STED) microscopy is a useful tool in investigation for super-resolution realm. By silencing the peripheral fluorophores of the excited spot, leaving only the very centre zone vigorous for fluorescence, the effective point spread function (PSF) could be immensely squeezed and subcellular structures, such as organelles, become discernable. Nevertheless, because of the low cross-section of stimulated emission and the short fluorescence lifetime, the depletion power density has to be extremely higher than the excitation power density and molecules are exposed in high risk of photobleaching. The existence of photobleaching greatly limits the research of STED in achieving higher resolution and more delicate imaging quality, as well as long-term and dynamic observation. Since the first experimental implementation of STED microscopy, researchers have lift out variety of methods and techniques to alleviate the problem. This paper would present some researches via conventional methods which have been explored and utilised relatively thoroughly, such as fast scanning, time-gating, two-photon excitation (TPE), triplet relaxation (T-Rex) and background suppression. Alternatively, several up-to-date techniques, especially adaptive illumination, would also be unveiled for discussion in this paper. The contrast and discussion of these modalities would play an important role in ameliorating the research of STED microscopy.

Photobleaching in STED nanoscopy and its dependence on the photon flux applied for reversible silencing of the fluorophore

In STED (stimulated emission depletion) nanoscopy, the resolution and signal are limited by the fluorophore de-excitation efficiency and photobleaching. Here, we investigated their dependence on the pulse duration and power of the applied STED light for the popular 750 nm wavelength. In experiments with red- and orange-emitting dyes, the pulse duration was varied from the sub-picosecond range up to continuous-wave conditions, with average powers up to 200 mW at 80 MHz repetition rate, i.e. peak powers up to 1 kW and pulse energies up to 2.5 nJ. We demonstrate the dependence of bleaching on pulse duration, which dictates the optimal parameters of how to deliver the photons required for transient fluorophore silencing. Measurements with the dye ATTO647N reveal that the bleaching of excited molecules scales with peak power with a single effective order ~1.4. This motivates peak power reduction while maintaining the number of STED-light photons, in line with the superior resolution commonly achieved for nanosecond STED pulses. Other dyes (ATTO590, STAR580, STAR635P) exhibit two distinctive bleaching regimes for constant pulse energy, one with strong dependence on peak power, one nearly independent. We interpret the results within a photobleaching model that guides quantitative predictions of resolution and bleaching.

Fluorescence nanoscopy in cell biology

Fluorescence nanoscopy uniquely combines minimally invasive optical access to the internal nanoscale structure and dynamics of cells and tissues with molecular detection specificity. While the basic physical principles of 'super-resolution' imaging were discovered in the 1990s, with initial experimental demonstrations following in 2000, the broad application of super-resolution imaging to address cell-biological questions has only more recently emerged. Nanoscopy approaches have begun to facilitate discoveries in cell biology and to add new knowledge. One current direction for method improvement is the ambition to quantitatively account for each molecule under investigation and assess true molecular colocalization patterns via multi-colour analyses. In pursuing this goal, the labelling of individual molecules to enable their visualization has emerged as a central challenge. Extending nanoscale imaging into (sliced) tissue and whole-animal contexts is a further goal. In this Review we describe the successes to date and discuss current obstacles and possibilities for further development.

Adaptive-illumination STED nanoscopy

The concepts called STED/RESOLFT superresolve features by a light-driven transfer of closely packed molecules between two different states, typically a nonfluorescent "off" state and a fluorescent "on" state at well-defined coordinates on subdiffraction scales. For this, the applied light intensity must be sufficient to guarantee the state difference for molecules spaced at the resolution sought. Relatively high intensities have therefore been applied throughout the imaging to obtain the highest resolutions. At regions where features are far enough apart that molecules could be separated with lower intensity, the excess intensity just adds to photobleaching. Here, we introduce DyMIN (standing for Dynamic Intensity Minimum) scanning, generalizing and expanding on earlier concepts of RESCue and MINFIELD to reduce sample exposure. The principle of DyMIN is that it only uses as much on/off-switching light as needed to image at the desired resolution. Fluorescence can be recorded at those positions where fluorophores are found within a subresolution neighborhood. By tuning the intensity (and thus resolution) during the acquisition of each pixel/voxel, we match the size of this neighborhood to the structures being imaged. DyMIN is shown to lower the dose of STED light on the scanned region up to ∼20-fold under common biological imaging conditions, and >100-fold for sparser 2D and 3D samples. The bleaching reduction can be converted into accordingly brighter images at <30-nm resolution.

Super-Photostable Phosphole-Based Dye for Multiple-Acquisition Stimulated Emission Depletion Imaging

As stimulated emission depletion (STED) microscopy can provide structural details of cells with an optical resolution beyond the diffraction limit, it has become an indispensable tool in cell biology. However, the intense STED laser beam usually causes rapid photobleaching of the employed fluorescent dyes, which significantly limits the utility of STED microscopy from a practical perspective. Herein we report a new design of super-photostable dye, PhoxBright 430 (PB430), comprising a fully ring-fused π-conjugated skeleton with an electron-accepting phosphole P-oxide unit. We previously developed a super-photostable dye C-Naphox by combining the phosphole unit with an electron-donating triphenylamine moiety. In PB430, removal of the amino group alters the transition type from intramolecular charge transfer character to π-π* transition character, which gives rise to intense fluorescence insensitive to molecular environment in terms of fluorescence colors and intensity, and bright fluorescence even in aqueous media. PB430 also furnishes high solubility in water, and is capable of labeling proteins with maintaining high fluorescence quantum yields. This dye exhibits outstanding resistance to photoirradiation even under the STED conditions and allows continuous acquisition of STED images. Indeed, using a PB430-conjugated antibody, we succeed in attaining a 3-D reconstruction of super-resolution STED images as well as photostability-based multicolor STED imaging of fluorescently labeled cytoskeletal structures.

Strong signal increase in STED fluorescence microscopy by imaging regions of subdiffraction extent

Photobleaching remains a limiting factor in superresolution fluorescence microscopy. This is particularly true for stimulated emission depletion (STED) and reversible saturable/switchable optical fluorescence transitions (RESOLFT) microscopy, where adjacent fluorescent molecules are distinguished by sequentially turning them off (or on) using a pattern of light formed as a doughnut or a standing wave. In sample regions where the pattern intensity reaches or exceeds a certain threshold, the molecules are essentially off (or on), whereas in areas where the intensity is lower, that is, around the intensity minima, the molecules remain in the initial state. Unfortunately, the creation of on/off state differences on subdiffraction scales requires the maxima of the intensity pattern to exceed the threshold intensity by a large factor that scales with the resolution. Hence, when recording an image by scanning the pattern across the sample, each molecule in the sample is repeatedly exposed to the maxima, which exacerbates bleaching. Here, we introduce MINFIELD, a strategy for fundamentally reducing bleaching in STED/RESOLFT nanoscopy through restricting the scanning to subdiffraction-sized regions. By safeguarding the molecules from the intensity of the maxima and exposing them only to the lower intensities (around the minima) needed for the off-switching (on-switching), MINFIELD largely avoids detrimental transitions to higher molecular states. A bleaching reduction by up to 100-fold is demonstrated. Recording nanobody-labeled nuclear pore complexes in Xenopus laevis cells showed that MINFIELD-STED microscopy resolved details separated by <25 nm where conventional scanning failed to acquire sufficient signal.

Spatially-controlled illumination microscopy

Live-cell and live-tissue imaging using fluorescence optical microscopes presents an inherent trade-off between image quality and photodamage. Spatially-controlled illumination microscopy (SCIM) aims to strike the right balance between obtaining good image quality and minimizing the risk of photodamage. In traditional imaging, illumination is performed with a spatially-uniform light dose resulting in spatially-variable detected signals. SCIM adopts an alternative imaging approach where illumination is performed with a spatially-variable light dose resulting in spatially-uniform detected signals. The actual image information of the biological specimen in SCIM is predominantly encoded in the illumination profile. SCIM uses real-time spatial control of illumination in the imaging of fluorescent biological specimens. This alternative imaging paradigm reduces the overall illumination light dose during imaging, which facilitates prolonged imaging of live biological specimens by minimizing photodamage without compromising image quality. Additionally, the dynamic range of a SCIM image is no longer limited by the dynamic range of the detector (or camera), since it employs a uniform detection strategy. The large dynamic range of SCIM is predominantly determined by the illumination profile, and is advantageous for imaging both live and fixed biological specimens. In the present review, the concept and working mechanisms of SCIM are discussed, together with its application in various types of optical microscopes.

Adaptive illumination reduces photobleaching in structured illumination microscopy

Photobleaching is a major factor limiting the observation time in fluorescence microscopy. We achieve photobleaching reduction in structured illumination microscopy (SIM) by locally adjusting the illumination intensities according to the sample. Adaptive SIM is enabled by a digital micro-mirror device (DMD), which provides a projection of the grayscale illumination patterns. We demonstrate a reduction in photobleaching by a factor of three in adaptive SIM compared to the non-adaptive SIM based on a spot grid scanning approach. Our proof-of-principle experiments show great potential for DMD-based microscopes to become a more useful tool in live-cell SIM imaging.

From single molecules to life: microscopy at the nanoscale

Super-resolution microscopy is the term commonly given to fluorescence microscopy techniques with resolutions that are not limited by the diffraction of light. Since their conception a little over a decade ago, these techniques have quickly become the method of choice for many biologists studying structures and processes of single cells at the nanoscale. In this review, we present the three main approaches used to tackle the diffraction barrier of ∼200 nm: stimulated-emission depletion (STED) microscopy, structured illumination microscopy (SIM), and single-molecule localization microscopy (SMLM). We first present a theoretical overview of the techniques and underlying physics, followed by a practical guide to all of the facets involved in designing a super-resolution experiment, including an approachable explanation of the photochemistry involved, labeling methods available, and sample preparation procedures. Finally, we highlight some of the most exciting recent applications of and developments in these techniques, and discuss the outlook for this field.

Graphical Abstract

Photoswitchable Spiropyran Dyads for Biological Imaging

The synthesis of a small-molecule dyad consisting of a far-red-emitting silicon rhodamine dye that is covalently linked to a photochromic spironaphthothiopyran unit, which serves as a photoswitchable quencher, is reported. This system can be switched reversibly between the fluorescent and nonfluorescent states using visible light at wavelengths of 405 and 630 nm, respectively, and it works effectively in aqueous solution. Live-cell imaging demonstrates that this dyad has several desirable features, including excellent membrane permeability, fast and reversible modulation of fluorescence by visible light, and good contrast between the bright and dark states.

Follow-up review: recent progress in the development of super-resolution optical microscopy

The advent of super-resolution microscopy brought a huge impact to various research fields ranging from the fundamental science to medical and industrial applications. The technological development is still ongoing with involving different scientific disciplines and often changing the standard of optical imaging. In this review, I would like to introduce the recent research progress in super-resolution microscopy as a follow-up for the featured issue in Microscopy (Vol. 64, No. 4, 2015) with discussions especially on the current trends and new directions in the technological development.