A reliable and validated LC-MS/MS method for the simultaneous quantification of 4 cannabinoids in 40 consumer products

Development and validation of a sensitive and simultaneous liquid chromatography tandem mass spectrometry method for the determination of eight phytocannabinoids in various CBD products

In this study, we developed and validated a liquid chromatography tandem mass spectrometry (LC-MS/MS) method for the simultaneous determination of eight phytocannabinoids in various cannabidiol (CBD) products from Japanese market. This method was combined with electrospray ionization in positive mode and sample preparation with QuEChERS. Three types of commercial products such as honey, chocolate, and gummies were used to perform accurate quantification with unified protocol of LC-MS/MS and QuEChERS. The limit of detection and quantification were 5-20 µg g-1 and 10-40 µg g-1, respectively. Reproducibility was ensured using matrices free of target foods, resulting in an accuracy within ±10 % and a precision with a relative standard deviation of less than 5 % for all targets. Finally, this analytical method was applied to 8 series of commercial samples from the Japanese market. This unified protocol will serve as a reference as an official method in Japan.

Recent Advanced Methods for Extracting and Analyzing Cannabinoids from Cannabis-Infused Edibles and Detecting Hemp-Derived Contaminants in Food (2013-2023): A Comprehensive Review

Cannabis-infused edibles are food products infused with a cannabis extract. These edibles include baked goods, candies, and beverages, offering an alternative way to consume cannabis instead of smoking or vaporizing it. Ensuring the accurate detection of cannabis-infused edibles and identification of any contaminants is crucial for public health and safety. This is particularly important for compliance with legal regulations as these substances can have significant psychoactive effects, especially on unsuspecting consumers such as children or individuals with certain medical conditions. Using efficient extraction methods can greatly improve detection accuracy, ensuring that the concentration of cannabinoids in edibles is measured correctly and adheres to dosage guidelines and legal limits. This review comprehensively examines the preparation and extraction techniques for cannabinoid edibles. It covers methods such as solid-phase extraction, enhanced matrix removal-lipid, QuEChERS, dissolution and dispersion techniques, liquid-phase extraction, and other emerging methodologies along with analytical techniques for cannabinoid analysis. The main analytical techniques employed for the determination of cannabinoids include liquid chromatography (LC), gas chromatography (GC), direct analysis in real time (DART), and mass spectrometry (MS). The application of these extraction and analytical techniques is further demonstrated through their use in analyzing specific edible samples, including oils, candies, beverages, solid coffee and tea, snacks, pet food, and contaminated products.

Comprehensive Insight into Cutaneous Application of Hemp

Known for its natural bio-compounds and therapeutic properties, hemp is being utilized in the development of skin products. These products offer a wide range of applications and benefits in the fields of natural bio-compounds, pharmaceutical technology, topical delivery systems, and cosmeceuticals. This manuscript deals with hemp actives, such as cannabinoids, terpenes, and flavonoids, and their diverse biological properties relative to topical application, including anti-inflammatory, antimicrobial, and antioxidant effects. Also, the paper reviews strategies to overcome poor penetration of hemp actives, as well as the integration of hemp actives in cosmeceuticals that provide natural and sustainable alternatives to traditional skincare products offering a range of benefits, including anti-aging, moisturizing, and soothing properties. The review aims to provide a comprehensive understanding of the development and manufacturing processes of skin products containing hemp actives. By delving into the science behind hemp-based products, the paper provides valuable insights into the potential of hemp as a versatile ingredient in the pharmaceutical and cosmetic industries. The utilization of hemp in these innovative products not only offers therapeutic benefits but also promotes natural and sustainable approaches to skincare.

Key Transdermal Patch Using Cannabidiol-Loaded Nanocarriers with Better Pharmacokinetics in vivo

Purpose

Cannabidiol (CBD) is a promising therapeutic drug with low addictive potential and a favorable safety profile. However, CBD did face certain challenges, including poor solubility in water and low oral bioavailability. To harness the potential of CBD by combining it with a transdermal drug delivery system (TDDS). This innovative approach sought to develop a transdermal patch dosage form with micellar vesicular nanocarriers to enhance the bioavailability of CBD, leading to improved therapeutic outcomes.

Methods

A skin-penetrating micellar vesicular nanocarriers, prepared using nano emulsion method, cannabidiol loaded transdermal nanocarriers-12 (CTD-12) was presented with a small particle size, high encapsulation efficiency, and a drug-loaded ratio for CBD. The skin permeation ability used Strat-M™ membrane with a transdermal diffusion system to evaluate the CTD and patch of CTD-12 (PCTD-12) within 24 hrs. PCTD-12 was used in a preliminary pharmacokinetic study in rats to demonstrate the potential of the developed transdermal nanocarrier drug patch for future applications.

Results

In the transdermal application of CTD-12, the relative bioavailability of the formulation was 3.68 ± 0.17-fold greater than in the free CBD application. Moreover, PCTD-12 indicated 2.46 ± 0.18-fold higher relative bioavailability comparing with free CBD patch in the ex vivo evaluation. Most importantly, in the pharmacokinetics of PCTD-12, the relative bioavailability of PCTD-12 was 9.47 ± 0.88-fold higher than in the oral application.

Conclusion

CTD-12, a transdermal nanocarrier, represents a promising approach for CBD delivery, suggesting its potential as an effective transdermal dosage form.

An evaluation of the cannabinoid content of the liquid and thermal degradation analysis of cannabis-labeled vape liquids

Cannabidiol (CBD) vape pen usage has been on the rise given the changing political and scientific climate as well as the promotion of these delivery systems as a more accessible and lower-risk option for consumers. Despite being marketed as a safer way to use cannabis, CBD vape liquids are sold without restrictions or meticulous quality control procedures such as toxicological and clinical assessment, standards for product preservation, or investigative degradation analyses. Nine CBD-labeled vape liquid samples purchased and manufactured in the United States were evaluated and assessed for cannabinoid content. Quantification and validation of cannabinoids and matrix components was accomplished using gas and liquid chromatography with mass spectrometry analysis (GC-MS and LC-MS/MS) following liquid-liquid extraction with methanol. Samples degraded by temperature (analyzed by GC-MS) showed a greater disparity from the labeled CBD content compared with samples analyzed as purchased (by LC-MS/MS). Thermal degradation of the vape liquids showed increased levels of tetrahydrocannabinol (THC). Also, extended time and temperature degradation were evaluated in vape liquids by storing them for 15 months and then varying temperature conditions before analysis, which indicated CBD transformed into other cannabinoids leading to different cannabinoid content within the vape samples. Evaluation conducted on these vape liquids indicated the route of exposure, storage conditions, and length of storage could expose consumers to unintended cannabinoids and showed a concerning level of disagreement between the products' labeled cannabinoid content and the results generated by these analyses.

Evaluating the Metabolomic Profile and Anti-Pathogenic Properties of Cannabis Species

The Cannabis species is one of the potent ancient medicinal plants acclaimed for its medicinal properties and recreational purposes. The plant parts are used and exploited all over the world for several agricultural and industrial applications. For many years Cannabis spp. has proven to present a highly diverse metabolomic profile with a pool of bioactive metabolites used for numerous pharmacological purposes ranging from anti-inflammatory to antimicrobial. Cannabis sativa has since been an extensive subject of investigation, monopolizing the research. Hence, there are fewer studies with a comprehensive understanding of the composition of bioactive metabolites grown in different environmental conditions, especially C. indica and a few other Cannabis strains. These pharmacological properties are mostly attributed to a few phytocannabinoids and some phytochemicals such as terpenoids or essential oils which have been tested for antimicrobial properties. Many other discovered compounds are yet to be tested for antimicrobial properties. These phytochemicals have a series of useful properties including anti-insecticidal, anti-acaricidal, anti-nematicidal, anti-bacterial, anti-fungal, and anti-viral properties. Research studies have reported excellent antibacterial activity against Gram-positive and Gram-negative multidrug-resistant bacteria as well as methicillin-resistant Staphylococcus aureus (MRSA). Although there has been an extensive investigation on the antimicrobial properties of Cannabis, the antimicrobial properties of Cannabis on phytopathogens and aquatic animal pathogens, mostly those affecting fish, remain under-researched. Therefore, the current review intends to investigate the existing body of research on metabolomic profile and anti-microbial properties whilst trying to expand the scope of the properties of the Cannabis plant to benefit the health of other animal species and plant crops, particularly in agriculture.

Analytical techniques for screening of cannabis and derivatives from human hair specimens

Cannabis and associated substances are some of the most frequently abused drugs across the globe, mainly due to their anxiolytic and euphorigenic properties. Nowadays, the analysis of hair samples has been given high importance in forensic and analytical sciences and in clinical studies because they are associated with a low risk of infection, do not require complicated storage conditions, and offer a broad window of non-invasive detection. Analysis of hair samples is very easy compared to the analysis of blood, urine, and saliva samples. This review places particular emphasis on methodologies of analyzing hair samples containing cannabis, with a special focus on the preparation of samples for analysis, which involves screening and extraction techniques, followed by confirmatory assays. Through this manuscript, we have presented an overview of the available literature on the screening of cannabis using mass spectroscopy techniques. We have presented a detailed overview of the advantages and disadvantages of this technique, to establish it as a suitable method for the analysis of cannabis from hair samples.

A liquid chromatography electrospray ionization tandem mass spectrometry method for quantification of up to eighteen cannabinoids in hemp-derived products

A LC-ESI/MS/MS method was developed for quantification of up to eighteen cannabinoids, the maximum number published so far. A thorough study of published LC-ESI/MS/MS methods using triple quadrupole mass spectrometers revealed a possible misconception that multiple reaction monitoring (MRM) was able to definitively differentiate structural isomers of cannabinoids, especially Δ8-/Δ9-tetrahydrocannabinol (THC), which explained why many of those methods were developed for a limited number of cannabinoids, as small as two, and did not include Δ8-THC. In this study, the use of a quadrupole time-of-flight (QTOF) mass spectrometer for targeted analysis indicated that MRM could not definitively distinguish structural isomers of Δ9-THC, with a possible exception of cannabicyclol (CBL) for less accurate quantification, so their baseline separation was essential for their accurate quantification. After the developed method was successfully validated according to the ISO 17025 guidelines, it was further applied for the analysis of eighteen hemp-derived products, including drinks, water-soluble oils, topical serum, body lotion, face cream, lip balm, gummies, hard candy, coffee, snacks, and pet treats. The LOQ was 0.00008% (w/w) for drinks with the analysis of 12.5 mg/mL extracts, while the LOQ was 0.008% (w/w) for other samples because 125 μg/mL extracts were analyzed due to higher content of cannabinoids in non-drink samples. For the first-time, extraction recovery and matrix effect were tracked in real-time for each sample being analyzed, obtaining 92.9-106.3% and 91.3-120.2% in triplicate measurements, respectively, by spiking abnormal cannabidiol (ACBD), a cannabinoid not naturally present in hemp, into each sample before extraction and ACBD-d3 into each sample after extraction.

A systematic review of analytical methodologies capable of analysing phytocannabinoids in cosmetics

As cannabidiol (CBD) is not considered to be a drug and because of its potential health claims, it is an interesting compound that is often found in cosmetics. However, the safety of CBD, as well as the presence of trace amounts of other phytocannabinoids, including the psychoactive substance ∆9 -tetrahydrocannabinol (THC), is still being debated. A robust analytical technique capable of analysing cosmetic products and determining their phytocannabinoid content will be crucial in assessing the safety of these products. This systematic review aims to highlight the current analytical tools that could be used to analyse phytocannabinoids in cosmetics. The ideal method would be able to analyse high levels of CBD in combination with trace levels of THC and their acids. The method should provide good recoveries and accuracies in a variety of matrices while providing information on up-coming phytocannabinoids such as cannabichromene (CBC), cannabigerol (CBG) and cannabinol (CBN). The systematic review approach was based on the Preferred Reporting Items for Systematic review and Meta-Analyses method. The research focused on studies published from January 2010 to December 2022 in PubMed and Scopus. A total of 15 datasets met the inclusion and exclusion criteria and were tabulated to allow easy comparison. Although some of the reviewed methods can handle multiple matrices and provide satisfactory recoveries, this review process did not identify an ideal method. The most suitable methods either could not quantify phytocannabinoid acids or were not sensitive enough to quantify trace levels of psychoactive phytocannabinoids.

Comparing dehulled hemp meal and canola meal as a protein supplement for lactating dairy cows

Effects of replacing canola meal with dehulled hemp meal in the diet of lactating dairy cows on the dry matter intake (DMI), milk production, milk fatty acid profile, blood metabolites, total-tract nutrient digestibility, and transfer of cannabinoids were determined in 12 lactating, nonpregnant Holstein cows. These cows were used in a 3 × 3 Latin square design with three 3-wk experimental periods consisting of 2 wk of adaptation and 1 wk of sampling. Cows received basal partial mixed rations supplemented with either 15% dry matter (DM) canola meal (CM15), 15% DM dehulled hemp meal (HM15), or 7.5% DM dehulled hemp meal and 7.5% DM canola meal (CM7.5HM7.5). Diets were formulated to be isoenergetic and isonitrogenous, but the HM15 and CM7.5HM7.5 diets contained, on average 1.2 percentage units more crude protein (CP) that the CM15 diet. The CP of the dehulled hemp meal contained less soluble protein than that of canola meal. Hence, the intake of soluble protein did not differ among diets. Canola meal contained less crude fat than hemp seed meal (3.46% vs. 8.25% DM). The lipid fraction of canola meal fat contained more oleic acid (C18:1 cis-9; 47.3 vs. 14.9 g/100 g of fatty acids, FA) and vaccenic acid (18:1 cis-11; 13.7 vs. 1.2 g/100 g of FA) and less linoleic acid (C18:2n-6; 21.9 vs. 55.7 g/100 g of FA) and α linolenic acid (C18:3n-3; 3.2 vs. 8.9 g/100 g of FA) than the lipid fraction of hemp seed meal. The hemp seed meal contained 4.9 µg/g cannabidiol, 5.1 µg/g cannabidiolic acid, and 0.1 µg/g tertahydroxycannabinolic acid A. Treatments did not differ in DMI, yields of milk, milk protein and milk fat, total-tract neutral detergent fiber digestibility, and blood plasma concentrations of β-hydroxybutyrate and nonesterified FA. Apparent total-tract DM digestibility was lowest in the HM15 treatment, whereas the CP digestibility and the concentrations of urea in blood, urine, and milk were lowest in the CM15 treatment. Cannabinoids were not detected in urine, milk, and blood plasma. Replacing canola meal with hemp seed meal increased milk fat contents of polyunsaturated fatty acids (PUFA), which were 3.42, 3.90, and 4.25 g/100 g of FA for the CM15, CM7.5HM7.5, and HM15 treatments, respectively. Especially, the milk fat contents of 18:2n-6 (1.99 vs. 1.56 g/100 g FA) and 18:3n-3 (0.31 vs. 0.43 g/100 g FA) were increased by hemp meal feeding. Especially, the milk fat contents of 18:2n-6 (1.99 vs. 1.56 g/100 g FA) and 18:3n-3 (0.31 vs. 0.43 g/100 g FA) were increased by hemp meal feeding. Our data show that hemp seed meal is a suitable and safe replacement for canola meal as a feed for lactating dairy cows and that this replacement increases CP digestibility and urea in urine, milk, and blood plasma, as well the PUFA content of milk fat.

Quality and safety of hemp meal as a protein supplement for nonlactating dairy cows

Hemp seed meal may be a suitable protein supplement for dairy cows, but its quality and safety as a dairy cow feed has not yet been fully investigated. As a result, dry matter intake (DMI), rumen fermentation, blood metabolites, total-tract digestibility, and concentrations of cannabinoids in blood plasma, urine, muscle, and adipose tissues were compared among nonlactating Holstein dairy cows receiving a basal partial mixed ration that was supplemented with either 10.2% dry matter (DM) hemp meal (HM treatment), 13.5% DM canola meal (CM treatment), or 6.25% DM hemp meal and 6.16% DM canola meal (HC treatment). Diets were formulated to be isoenergetic and isonitrogenous. Six nonlactating, nonpregnant Holstein cows were used in a repeated 3 × 3 Latin square design trial with three 3-wk experimental periods. The first 2 weeks of each served as adaptation. Sample and data collection occurred during the third week of each period. Neither the partial mixed ration nor canola meal contain cannabidiol (CBD), cannabidiolic acid (CBDA), d9-tetrahydrocannabinol (THC), or tetrahydrocannabinolic acid A (THCA). However, the hemp meal contained 3.0, 4.4, 0, and 0.1 μg/g DM of CBD, CBDA, THC, and THCA, respectively. Treatment did not affect DMI, pH, concentrations of volatile fatty acids or ammonia in the rumen, total-tract digestibilities of DM and crude protein, or blood plasma concentrations of glucose, urea, β-hydroxybutyrate, and nonesterified fatty acids. Hence, based on these metabolites, treatment did not affect the nutritional status of the cows. However, the total-tract neutral detergent fiber digestibility of the CM treatment (43%) was higher than that of the HM treatment (38%). No cannabinoids were detected in blood plasma, rumen fluid, and urine. Cannabinoids were also not detected in kidney, liver, urine, muscle, or adipose tissues at the end of the experiment when cows had undergone all treatments. Feces from all treatments did not contain detectable concentrations of THC or THCA, but feces of cows on the HC treatment contained 0.42 and 0.40 μg/g DM of CBD and CBDA, respectively. Feces of cows on the HM treatment contained 0.68 and 0.67 μg/g DM of CBD and CBDA, respectively. This indicated that most ingested CBD and CBDA were not absorbed but instead were excreted in the feces. Our data show dietary inclusion rates of up to 10.2% of DM. We find that hemp meal is a high-quality and safe protein supplement for nonlactating dairy cows.

High Specific and Rapid Detection of Cannabidiol by Gold Nanoparticle-Based Paper Sensor

In order to facilitate monitoring of cannabidiol (CBD), we devised a gold immunochromatographic sensor based on a specific monoclonal antibody (mAb). To prepare the antigen, a novel hapten with CBD moiety and a linear carbon chain was employed. By utilizing hybridoma technology, a specific mAb was screened and identified that exhibited a 50% maximal inhibitory concentration against CBD ranging from 28.97 to 443.97 ng/mL. Extensive optimization led to the establishment of visual limits of detection for CBD, achieving a remarkable sensitivity of 8 μg/mL in the assay buffer. To showcase the accuracy and stability, an analysis of CBD-spiked wine, sparkling water, and sports drink was conducted. The recovery rates observed were as follows: 88.4-109.2% for wine, 89.9-107.8% for sparkling water, and 83.2-95.5% for sports drink. Furthermore, the coefficient of variation remained impressively low, less than 4.38% for wine, less than 2.07% for sparkling water, and less than 6.34% for sports drink. Importantly, the developed sensor exhibited no cross-reaction with tetrahydrocannabinol (THC). In conclusion, the proposed paper sensor, employing gold nanoparticles, offers a user-friendly and efficient approach for the precise, rapid, and dependable determination of CBD in products.

Applications of mass spectrometry in cosmetic analysis: An overview

Mass spectrometry (MS) is a crucial tool in cosmetic analysis. It is widely used for ingredient screening, quality control, risk monitoring, authenticity verification, and efficacy evaluation. However, due to the diversity of cosmetic products and the rapid development of MS-based analytical methods, the relevant literature needs a more systematic collation of information on this subject to unravel the true potential of MS in cosmetic analysis. Herein, an overview of the role of MS in cosmetic analysis over the past two decades is presented. The currently used sample preparation methods, ionization techniques, and types of mass analyzers are demonstrated in detail. In addition, a brief perspective on the future development of MS for cosmetic analysis is provided.

DART-MS Facilitated Quantification of Cannabinoids in Complex Edible Matrices-Focus on Chocolates and Gelatin-Based Fruit Candies

Traditional methods for detecting and quantifying cannabinoids in Cannabis sativa materials are most often chromatography-based, and they generally require extensive sample preparation protocols to render materials into a form that can be injected into the systems without the risk of contaminating or damaging the equipment. This challenge is amplified when interrogating the increasingly broad range of matrix types that cannabinoids are infused within, such as edibles that also contain sugars, fats, lipids, and carbohydrates. The requisite application of highly nuanced methods that must be developed for each matrix type is, in addition to being resource-intensive and time-consuming, highly impractical and unsustainable for crime laboratories endeavoring to perform such analyses in a routine manner, since they are often under-resourced while typically also confronting sample testing backlogs. A key to resolving this issue is to identify an analysis approach that avoids the requirement for nuanced method development by being applicable to a broader range of matrix types. Ambient ionization mass spectrometry (AIMS) methods have shown great promise in their ability to rapidly interrogate samples. Therefore, this study focused on developing validated protocols using AIMS (specifically, direct analysis in real time-high-resolution mass spectrometry, or DART-HRMS) to detect and quantify Δ⁹-tetrahydrocannabinol (THC) and cannabidiol (CBD) in edible matrices. Calibration curves were developed using deuterated counterparts of THC and CBD as internal standards. Following the use of high cannabinoid recovery rate extraction protocols for chocolates and gelatin-based fruit candies or "gummies", the DART-HRMS approach was applied to quantify cannabinoid levels in commercially available cannabinoid-infused candies, yielding results similar to those reported on the product labels. Importantly, the developed method circumvented challenges encountered using traditional approaches. As the Cannabis field continues to evolve and new matrix types emerge on the market, the DART-HRMS detection and quantification protocols can be readily applied without the need for major procedural adaptations.

Quantification of 7 cannabinoids in cannabis oil using GC-MS: Method development, validation and application to therapeutic preparations in Friuli Venezia Giulia region, Italy

The use of therapeutic cannabis preparations in Friuli Venezia Giulia is increasingly expanding. Even if cannabis oil finds its applications in several disorders affecting adults and children, it is not yet a standardized product and, to ensure the quality of the preparation, a quantitative analysis must be carried out before dispensing it to patients. Gas chromatography coupled to mass spectrometry (GC-MS) is a frequently used technique for quantification of cannabinoids, the active compounds of C. sativa. In this context, we developed a GC-MS method for the simultaneous quantification of 7 cannabinoids (CBD, CBDA, CBG, CBN, THCA, THCV and Δ⁹-THC) that is not time and sample consuming: 10 μL of cannabis oil were used for the sample preparation, that consists in derivatization of analytes through silylation. Calibration curves were built from 0.2 to 2 μg/mL. The percentage of accuracy and precision did not exceed the values recommended by validation guidelines. The limit of detection was 0.01 μg/mL; whereas the lower limit of quantification was 0.2 μg/mL. There was no carry over. The proposed GC-MS method showed good sensitivity, specificity, linearity, accuracy, precision and applicability to therapeutic preparations.

Health value and keeping quality of chevon from goats fed finisher diets containing hemp (Cannabis sativa L.) seed cake

Wether goats (n = 7) were fed finishing diets containing either 0, 25, 50, 75 or 100 g/kg DM of hempseed cake (HSC) substituting soybean meal to evaluate chevon fatty acid, volatile and oxidative profiles. Feeding HSC diets linearly decreased (P < 0.05) chevon c9-16:1, 16:0, total saturated FA (SFA) and protein oxidation but linearly increased (P < 0.05) t9-18:1, t11-18:1, conjugated linoleic acids, n-3 polyunsaturated FA (PUFA), individual long-chain n-6 PUFA and antioxidant activity. On day 1 and 7 of retail display, diets containing 75 and 100 g/kg DM HSC had greater (P < 0.05) TBARS than the other diet × day interactions. Addition of HSC to the diet increased (P < 0.05) and preserved (P < 0.05) chevon contents of hexanal and methyl caprate throughout the retail display period. Overall, feeding HSC up to 100 g/kg DM enhances chevon profiles of healthful PUFA, desirable flavor volatiles and protein shelf-stability.

Potency testing of up to sixteen cannabinoids in hemp-infused edibles using liquid chromatography diode array detector with optional confirmation of identity by electrospray ionization time-of-flight mass spectrometry

A LC-DAD method for potency testing of up to sixteen cannabinoids has been developed, validated, and applied for analysis of twenty hemp-infused edibles encompassing a broad range of complex matrices. The method was validated according to ISO 17025 guidelines and met requirements. Samples or their uniform water-dispersions were extracted by methanol under homogenization through pulverization and/or ultrasonication. By spiking abnormal cannabidiol, a cannabinoid not naturally present in hemp, into each sample, extraction recovery was tracked in real time, obtaining 90 to 108% in triplicates with relative standard deviations of 0.5 to 6.5%. The linear calibration range was between 0.008 and 10% (w/w) for each cannabinoid using a 250 µg/mL solution of hemp-infused edibles, except for drinks (sparkling water and tea), where it was between 0.0008 and 1% (w/w) using a 2.5 mg/mL solution. ESI/TOFMS confirmed a good method specificity, i.e., without any false positive identification of individual cannabinoid.

Trace determination of tetrahydrocannabinol (THC) in cosmetic products by stir bar sorptive dispersive microextraction followed by liquid chromatography-tandem mass spectrometry

An analytical method for the determination of tetrahydrocannabinol (THC) at trace level in cosmetics is presented. As psychoactive compound, the presence of THC in consumer products should be avoided. However, it might be unintentionally present in cannabidiol-rich or hemp-based products by contamination or isomerization of cannabidiol. Due to the low concentrations expected, a sensitive and selective method is necessary for the analytical control of these products. In this sense, the presented method is based on stir bar sorptive dispersive microextraction (SBSDME) followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). In this work, a magnetic composite made of CoFe₂O₄ magnetic nanoparticles embedded in a commercial reverse-phase polymer (Strata™-X-RP) was employed as magnetic sorbent material taking advantage of its affinity to the target analyte. Under the optimized conditions, the method was validated and showed good analytical features in terms of linearity (at least up to 10 ng mL^-1), limits of detection and quantification (2.2 and 7.2 ng g^-1, respectively) and repeatability (RSD <10%). Moreover, relative recoveries between 99 and 109% were obtained, showing matrix effects were negligible using deuterated THC (THC-D₃) as surrogate. This new approach was successfully applied to ten commercially-available cosmetic samples of different matrices, thus showing it is suitable for the analytical control of THC in cosmetic products. The proposed methodology overcomes some of the drawbacks of the previous works with the same purpose, such as the higher limits of detection, time-consuming procedures, and consumption of large volumes of organic solvents.

Risk of unintentional antidoping rule violations by consumption of hemp products

Consumption of hemp products is continuously growing, with an expanding scope of applications. Suppliers operate through different distribution channels, but the Internet is a major retail platform. Hemp products are prepared from cannabis plants and, therefore, might contain a variety of different natural cannabinoids. According to the regulations of the World Anti-Doping Agency, all natural and synthetic cannabinoids are prohibited in-competition, with the explicit exemption of cannabidiol. Therefore, an investigation of 23 hemp products for the presence of cannabinoids was performed to determine the likelihood of unintentional violations of anti-doping regulations. An assay for the detection of 16 cannabinoids in nutritional supplements was developed and validated. The sample preparation consisted of QuEChERS extraction, trimethylsilylation, and analysis by gas chromatography/tandem mass spectrometry. All 23 commercially available hemp products were analyzed, and assay characteristics such as selectivity, limit of detection, limit of identification, limit of quantification, linearity, imprecision, recovery, and accuracy were determined. Twenty of 23 hemp products included a variety of cannabinoids at, occasionally, substantial concentrations, with four products covering the entire spectrum of tested cannabinoids. An ethics committee-approved single-dose administration study was conducted with the commercially available hemp products, investigating the presence of 16 cannabinoids in urine collected pre- and post-consumption. Variable patterns of cannabinoids or their metabolites in urine were observed. In 30% of the urine samples collected 8 h after ingestion, the presence of a prohibited cannabinoid would have resulted in an unintentional violation of anti-doping regulations.

Development and Validation of the LC-MS/MS Method for Determination of 130 Natural and Synthetic Cannabinoids in Cannabis Oil

Dietary supplements are widely available products used by millions of people around the world. Unfortunately, the procedure of adding pharmaceutical and psychoactive substances has recently been observed, in order to increase the effectiveness of supplements in the form of hemp oils. For this reason, it is extremely important to develop analytical methods for the detection of substances prohibited in dietary supplements and food products. In the present study, using the LC-MS/MS technique, an innovative method for the detection and quantification of 117 synthetic cannabinoids and 13 natural cannabinoids in dietary supplements and food products in the form of oils during one 13-min chromatographic run was developed. Each method was fully validated by characterization of the following parameters: The limit of detection was set to 0.1 ng/mL (100 µg/g, 0.01%). The limit of quantification ranged from 0.05 ng/mL to 50 ng/mL. The criteria assumed for systematic error caused by methodological bias (±20%) resulting from the recovery of analytes after the extraction process, as well as the coefficient of variation (CV) (≤20%), were met for all 130 tested compounds. The positive results of the validation confirmed that the developed methods met the requirements related to the adequacy of their application in a given scope. Additionally, methods developed using the LC-MS/MS technique were verified via proficiency tests. The developed analytical procedure was successfully used in the analysis of hemp oils and capsules containing them in the studied dietary supplements.

Direct In Vivo Analysis of CBD- and THC-Acid Cannabinoids and Classification of Cannabis Cultivars Using SpiderMass

In recent years, cannabis and hemp-based products have become increasingly popular for recreational use, edibles, beverages, health care products, and medicines. The rapid detection and differentiation of phytocannabinoids is, therefore, essential to assess the potency and the therapeutic and nutritional values of cannabis cultivars. Here, we implemented SpiderMass technology for in vivo detection of cannabidiolic acid (CBDA) and ∆9-tetrahydrocannabinolicacid (∆9-THCA), and other endogenous organic plant compounds, to access distribution gradients within the plants and differentiate between cultivars. The SpiderMass system is composed of an IR-laser handheld microsampling probe connected to a mass spectrometer through a transfer tube. The analysis was performed on different plant organs from freshly cultivated cannabis plants in only a few seconds. SpiderMass analysis easily discriminated the two acid phytocannabinoid isomers via MS/MS, and the built statistical models differentiated between four cannabis cultivars. Different abundancies of the two acid phytocannabinoids were found along the plant as well as between different cultivars. Overall, these results introduce direct analysis by SpiderMass as a compelling analytical alternative for rapid hemp analysis.

Automation System for the Flexible Sample Preparation for Quantification of Δ9-THC-D3, THC-OH and THC-COOH from Serum, Saliva and Urine

In the life sciences, automation solutions are primarily established in the field of drug discovery. However, there is also an increasing need for automated solutions in the field of medical diagnostics, e.g., for the determination of vitamins, medication or drug abuse. While the actual metrological determination is highly automated today, the necessary sample preparation processes are still mainly carried out manually. In the laboratory, flexible solutions are required that can be used to determine different target substances in different matrices. A suitable system based on an automated liquid handler was implemented. It has been tested and validated for the determination of three cannabinoid metabolites in blood, urine and saliva. To extract Δ9-tetrahydrocannabinol-D3 (Δ9-THC-D3), 11-hydroxy-Δ9-tetrahydrocannabinol (THC-OH) and 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THC-COOH) from serum, urine and saliva both rapidly and cost-effectively, three sample preparation methods automated with a liquid handling robot are presented in this article, the basic framework of which is an identical SPE method so that they can be quickly exchanged against each other when the matrix is changed. If necessary, the three matrices could also be prepared in parallel. For the sensitive detection of analytes, protein precipitation is used when preparing serum before SPE and basic hydrolysis is used for urine to cleave the glucuronide conjugate. Recoveries of developed methods are >77%. Coefficients of variation are <4%. LODs are below 1 ng/mL and a comparison with the manual process shows a significant cost reduction.

LC-MS/MS Assay for the Measurement of Cannabidiol Profiling in CBD Oil from Japanese Market and Application for Convertible Tetrahydrocannabinol in Acetic Acid Condition

Cannabidiol (CBD), a major non-psychoactive cannabinoid, has a lot of attention due to its potential relaxing properties and led the trend in commercial CBD aroma/oral hemp seed oil from the Japanese market. In this study, a routine assay for evaluating CBD oil samples was performed using LC coupled with tandem mass spectrometry (LC-MS/MS) and was used to apply the convertible tetrahydrocannabinol (THC) in acetic acid conditions. Based on the electrospray positive ion mode, the detection of cannabidiolic acid (CBDA; m/z 359 > 219), cannabigerolic acid (CBGA; m/z 361 > 343), cannabigerol (CBG; m/z 317 > 193), CBD (m/z 315 > 193), THC (m/z 315 > 193) and cannabinol (CBN; m/z 311 > 223) was performed by satisfying separation with high density of C₁₈ column. Oil samples (50 mg) were diluted with isopropanol (5 mL), to which stable isotope internal standards were added by dilution with methanol/water (50/50), and accuracy rates ranged from 97.8 to 102.2%. This method was used to evaluate the CBD oil products (5 kinds) from the Japanese market. Our survey found obvious counterfeit (non-detectable CBD) CBD oil from Japanese market. Following that, we investigated the conversion of THC in CBD oil samples in simple conditions such as 10% acetic acid and 70 °C for 6 h and discovered that converts THC proportions are approximately 5% ((THC content/CBD content) × 100) and <1.0%. Thus, our developed LC-MS/MS assay could be applied to monitor the CBD concentration and convertible THC from CBD oil.

Analytical Techniques for Phytocannabinoid Profiling of Cannabis and Cannabis-Based Products-A Comprehensive Review

Cannabis is gaining increasing attention due to the high pharmacological potential and updated legislation authorizing multiple uses. The development of time- and cost-efficient analytical methods is of crucial importance for phytocannabinoid profiling. This review aims to capture the versatility of analytical methods for phytocannabinoid profiling of cannabis and cannabis-based products in the past four decades (1980–2021). The thorough overview of more than 220 scientific papers reporting different analytical techniques for phytocannabinoid profiling points out their respective advantages and drawbacks in terms of their complexity, duration, selectivity, sensitivity and robustness for their specific application, along with the most widely used sample preparation strategies. In particular, chromatographic and spectroscopic methods, are presented and discussed. Acquired knowledge of phytocannabinoid profile became extremely relevant and further enhanced chemotaxonomic classification, cultivation set-ups examination, association of medical and adverse health effects with potency and/or interplay of certain phytocannabinoids and other active constituents, quality control (QC), and stability studies, as well as development and harmonization of global quality standards. Further improvement in phytocannabinoid profiling should be focused on untargeted analysis using orthogonal analytical methods, which, joined with cheminformatics approaches for compound identification and MSLs, would lead to the identification of a multitude of new phytocannabinoids.

Rapid separation of cannabinoid isomer sets using differential mobility spectrometry and mass spectrometry

With legalization and decriminalization of cannabis in many parts of the world comes the need for rapid separation and quantitation of the psychoactive ingredients.

Establishment of Detection Methods for Five Cannabinoids in Hemp Cosmetics Based on HPLC

A simultaneously HPLC detection method for cannabidiolic acid (CBDA), cannabidiol (CBD), cannabinol (CBN), Δ9-tetrahydrocannabinol (THC), tetrahydro-cannabinolic acid (THCA) in 3 kinds of cosmetics matrix containing hemp leaf extract was developed. The extraction and HPLC conditions were optimized, and a methodological verification was also carried out. The results showed that this method had a good linear relationship in the range of 0.25 - 50 μg/mL with LOD values for 5 cannabinoids all between 0.10 - 0.25 μg/g. The recovery rates of 5 cannabinoids in 3 different cosmetics matrixes were between 90.1 - 108.5%, and the RSD values were all below 4.4%. These results indicated that this method had the advantages of simple operation, high sensitivity, and good accuracy. Through the testing of 6 kinds of hemp cosmetics, it was found that such cosmetics had uneven quality. The establishment of this method can lay a methodological foundation for establishing relevant testing method standards.

Recent applications of mass spectrometry for the characterization of cannabis and hemp phytocannabinoids: From targeted to untargeted analysis

This review is a collection of recent applications of mass spectrometry studies for the characterization of phytocannabinoids in cannabis and hemp plant material and related products. The focus is mostly on recent applications using mass spectrometry as detector, in hyphenation to typical separation techniques (i.e., liquid chromatography or gas chromatography), but also with less common couplings or by simple direct analysis. The papers are described starting from the most common approach for targeted quantitative analysis, with applications using low-resolution mass spectrometry equipment, but also with the introduction of high-resolution mass analyzers as the detectors. This reflects a common trend in this field, and introduces the most recent applications using high-resolution mass spectrometry for untargeted analysis. The different approaches used for untargeted analysis are then described, from simple retrospective analysis of compounds without pure standards, through untargeted metabolomics strategies, and suspect screening methods, which are the ones currently allowing to achieve the most detailed qualitative characterization of the entire phytocannabinoid composition, including minor compounds which are usually overlooked in targeted studies and in potency evaluation. These approaches also represent powerful strategies to answer questions on biological and pharmacological activity of cannabis, and provide a sound technology for improved classification of cannabis varieties. Finally, open challenges are discussed for future directions in the detailed study of complex phytocannabinoid mixtures.

An Ultrafast Ultrahigh-Performance Liquid Chromatography Coupled With Tandem Mass Spectrometry Method for Cannabidiol Monitoring in Pediatric Refractory Epilepsy

BACKGROUND

Cannabidiol (CBD) is a nonpsychoactive natural product that has been increasingly used as a promising new drug for the management of neurological conditions such as refractory epilepsy. Development of rapid and sensitive methods to quantitate CBD is essential to evaluate its pharmacokinetics in humans, particularly in children. The objective of this work was to develop and validate an ultrafast ultrahigh-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS) method for CBD quantitation that is capable of detecting major CBD and tetrahydrocannabinol (THC) metabolites in the plasma of pediatric refractory epilepsy patients.

METHODS

Eight-point CBD calibration curves were prepared using 60 µL of plasma from healthy volunteers. Samples were analyzed in a Shimadzu Nexera X2 UHPLC system, which was coupled to a Sciex QTRAP 6500 mass spectrometer. Chromatography was optimized in acetonitrile (ACN)/water with a 70%-90% gradient of ACN in 2 minutes. Multiple reaction monitoring transitions of major CBD and THC metabolites were optimized in patient plasma.

RESULTS

The optimized UHPLC-MS/MS method was validated for the linear range (1-300 ng/mL) of CBD (r2 = 0.996). The limit of quantification and limit of detection were 0.26 and 0.86 ng/mL, respectively. Accuracy and precision met the acceptable validation limits. CBD recovery and matrix effects were 83.9 ± 13.9% and 117.4 ± 4.5%, respectively. The method was successfully applied to quantify CBD and detect the major CBD and THC metabolites in clinical samples. 7-COOH-CBD was the most intensely detected metabolite followed by glucuronide conjugates.

CONCLUSIONS

A simple and sensitive method for rapidly monitoring CBD and identifying relevant metabolites was developed. Its applicability in samples from children treated for epilepsy was demonstrated, making it an excellent alternative for performing pharmacokinetic studies.

Medicinal Applications of Cannabinoids Extracted from Cannabis sativa (L.): A New Route in the Fight Against COVID-19?

Cannabis sativa is a well-known plant that has been recognized for its benefits since ancient times by several medicinal systems, including those of China, India, Greece, and Egypt. Although C. sativa is one of the most investigated medicinal plants in the world, it faces some of the greatest controversies surrounding its legalization and use as a medication. C. sativa contains several hundred phytoconstituents, including the infamous "cannabinoids". It is necessary to properly understand the medicinal importance of these phytochemicals and spread awareness among the countries where cannabis is still facing legal obstacles. The current review focuses on the most recent literature pertaining to various applications of cannabinoids, with a special focus on the medicinal aspect of these phytochemicals. Peer-reviewed articles focusing on the importance of cannabis and cannabinoids are the target of this review. Articles were selected based on the relevance to the general scope of the work, i.e., application of cannabinoids. Cannabinoids can truly be regarded as wonder drugs, considering their immense diversity of usage. Unfortunately, however, many of the mares have never been researched biologically or pharmacologically due to their low yield in the plant. However, the approval of some cannabinoids by the FDA (along with other recognized national medical health systems) has opened the horizon for the use of these natural drugs in medicines such as Epidiolex® (cannabidiol, used for the treatment of severe forms of epilepsy) and Sativex®(Δ⁹-tetrahydrocannabinol and cannabidiol, used for the treatment of spasticity caused by multiple sclerosis). Many pharmacological properties of C. sativa are attributed to cannabidiol (CBD), a non-psychoactive component, along with Δ9-tetrahydrocannabinol (Δ⁹-THC), a psychoactive component. This review addresses the most important applications or current utilization of cannabinoids in a variety of treatments such as chronic pain, cancer, emesis, anorexia, irritable bowel syndrome, communicable diseases, glaucoma, and central nervous system disorders. The biosynthetic pathway of cannabinoids is also discussed. In short, cannabis has a myriad of bioactive compounds that have the potential to increase the list of approved cannabinoids suitable for therapy.

Fast liquid chromatography-tandem mass spectrometry method for the simultaneous determination of phytocannabinoids in oily based preparations

The reported method aims to be a powerful aid for the simultaneous determination of tetrahydrocannabinol (THC), cannabidiol (CBD), cannabinol (CBN), cannabigerol (CBG), tetrahydrocannabinolic acid (THCA), cannabidiolic acid (CBDA), and tetrahydrocannabivarin (THCV) in oily based preparations. The chromatographic separation was carried out using an Hypersil Gold PFP (50 × 2.1 mm, 1.9 μm) column, using H2O + 2 mM ammonium formate + 0.2 % formic acid (M1) and Methanol + 2 mM ammonium formate + 0.2 % formic acid (M2) as mobile phases. The flow rate was set 0.4 mL/min. Specifically, this method was validated in terms of linearity, limit of detections and quantifications (LODs and LOQs), accuracy (precision and trueness, both intra and interday), selectivity, and matrix effects. This procedure allowed quantifying seven phytocannabinoids in less than 10 min. The validated method shows a good linearity within the range 0.25-1000 ng/mL, while precision and trueness (intra- and inter-day) were below <13.25 % and 7.59 %, respectively. Regarding the matrix effect, the method satisfies all the requirements, except for the THC and THCV, where it reaches about 120 %. This element does not affect the method performances as it has been observed that this value is constant and reproducible and therefore does not involve errors in the quantitative analysis. The method was tested and applied on more 70 different oily based preparations. Furthermore, starting from four different cannabis cultivar (FM2, Bedrolite, Bedrocan, and Bediol), it allowed to evaluate the reproducibility of the magistrali preparations. The real samples, in fact, derive from different local pharmacies, and were analyzed by the accredited UNI CEI EN ISO/IEC 17025:2018, Pharmatoxicology Laboratory (ACCREDIA, lab n. 2274 ASLPE, accreditation number 1822 L), accordingly to the current regulations.

A Rapid and Sensitive Method for the Determination of Cannabidiol in Cosmetic Products by Liquid Chromatography–Tandem Mass Spectrometry

Cannabidiol is a phytocannabinoid with proven pharmacological properties that is also used in the cosmetic industry for its sebostatic and antioxidant activities, being considered a new anti-aging ally. An analytical method is proposed for the determination of CBD in cosmetic products by liquid chromatography with tandem mass spectrometry, after leaching the CBD from the cosmetic matrix with ethanol. Low instrumental limits of detection (0.22 ng mL−1) and quantification (0.74 ng mL−1) allow the determination of CBD at trace levels without needing preconcentration, whereas the wide linearity of the method allows the determination of CBD in more concentrated samples without high dilution. The method was successfully applied to the analysis of six cosmetic products and a raw material. The proposed method is suitable for the quality control of cosmetic products containing CBD, being able to quickly and easily determine this compound, ensuring that its concentration in the finished product is the desired one.

Cannabinoids: Recent Updates on Public Perception, Adverse Reactions, Pharmacokinetics, Pretreatment Methods and Their Analysis Methods

Cannabinoids (CBDs) have been traditionally used as a folk medicine. Recently, they have been found to exhibit a high pharmacological potential. However, they are addicted and are often abused by drug users, thereby, becoming a threat to public safety. CBDs and their metabolites are usually found in trace levels in plants or in biological matrices and, are therefore not easy to be detected. Advances have been made toward accurately analyzing CBDs in plants or in biological matrices. This review aims at elucidating on the consumption of CBDs as well as its adverse effects and to provide a comprehensive overview of CBD pretreatment and detection methods. Moreover, novel pretreatment methods such as microextraction, Quick Easy Cheap Effective Rugged Safe and online technology as well as novel analytic methods such as ion-mobility mass spectrometry, application of high resolution mass spectrometry in nontarget screening are summarized. In addition, we discuss and compare the strengths and weaknesses of different methods and suggest their future prospect.

A survey of cannabinoids and toxic elements in hemp-derived products from the United States marketplace

The 2018 Agricultural Improvement Act removed hemp from Schedule I control, creating a market for hemp products, including cannabidiol-containing products. Due to the market's rapid growth, little is known about the presence and concentration of cannabinoids in commercial products. Herein, 11 cannabinoids were quantified using liquid chromatography with diode-array detection in a non-representative sampling of 147 products labeled as containing hemp or cannabidiol. A subset of 133 products were analyzed for toxic elements using inductively coupled plasma-mass spectrometry. Cannabinoid content ranged from < LOD - 143 mg/serving, with a median of 16.7 mg/serving. Fewer than half of products surveyed contained cannabidiol concentrations within 20 % of their label declarations. The estimated exposure to lead was below the Interim Reference Level of 12.5 μg/day Pb for women of childbearing age, and most products presented concentrations of Δ⁹-tetrahydrocannabinol below LOQ. These findings emphasize the need for further testing and representative investigation of the cannabidiol marketplace.

Heterogeneous Ozonolysis of Tetrahydrocannabinol: Implications for Thirdhand Cannabis Smoke

Thirdhand smoke (THS) deposits to surfaces following smoking events and is a source of chemical exposure to humans. However, the evolution of THS in indoor environments is not well understood. Cannabis THS is a chemically distinct and prevalent form of THS, which has not been studied. The heterogeneous reaction of Δ⁹-tetrahydrocannabinol (THC), a major component of cannabis smoke, with ozone was examined as a pure compound and within cannabis smoke. Oxidative decay via ozonolysis and product formation were monitored by liquid chromatography-tandem mass spectrometry. Epoxide, dicarbonyl, and secondary ozonide THC reaction products were detected from both pure THC and cannabis experiments, with the product ratios dependent on relative humidity. The observed reaction kinetics for loss of THC on glass and cotton surfaces are consistent with a relatively short loss lifetime, which will be strongly dependent on the film thickness, ozone mixing ratio, and ozone reactivity of the surface substrate. The low volatility of THC and its oxidation products suggest that their contributions to thirdhand cannabis smoke will be less significant than the role that nicotine plays in thirdhand tobacco smoke.

Screening Method for the Quality Evaluation of Cannabidiols in Water-based Products Using Liquid Chromatography Tandem Mass Spectrometry

A sensitive, useful and preliminary screening method was proposed to quantitate the containable cannabinoids most commonly included in mineral water and gummi candy products, specifically cannabidiol (CBD), cannabinol (CBN), 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THCA), cannabigerol (CBG), and cannabidiolic acid (CBDA), using liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) for quality evaluations. Based on the electrospray positive ion mode, the limit of detection and the limit of quantification values were 0.2 to 0.5 ng/mL and 0.8 and 2.0 ng/mL. Samples (0.5 g) were diluted by water/methanol (50/50), to which stable isotope internal standards were added; the recovery results appeared in range from 91.3 to 101.2%. This method was applied to evaluate CBD products (6 kinds) from the Japanese market. Our survey found obvious discrepancies between the labeling and the results were overserved in products. In addition, CBN, THCA, CBG, and CBDA were not detected in full-spectrum products that contained various cannabinoids that naturally occur in the cannabis plant. Thus, it is necessary to be able to verify the accurate concentration and impurity in various CBD products from the Japanese market as quickly as possible.

A Simple, Fast, and Green Oil Sample Preparation Method for Determination of Cannabidioloic Acid and Cannabidiol by HPLC-DAD

Currently, the medical use of food supplements containing Cannabis sativa has attracted the interest of consumers, as well as the medical and scientific community. With the increasing consumption of these products, there is also a risk of their abuse or discrepancy between the actual and declared contents of active substances by the manufacturer in these products. Thus, the development and elaboration of analytical procedures for determination of appropriate phytocannabinoids seems to be important. This work focuses on the development of a simple, fast and environmentally friendly liquid-liquid extraction method combined with fat freezing from an oil sample to isolate two phytocannabinoids: cannabidiol (CBD) and cannabidiolic acid (CBDA). The extraction method was optimized considering efficacy and repeatability of extraction, as well as minimalizing use of organic reagents and sample amount. Under the optimized conditions, extraction recovery for CBD was 97.3–109% and for CBDA was 69.1–69.5% with precision (RSD, %) 5.0–8.4 and 7.1–10.6, respectively. The evaluated main analytical parameters of the developed high pressure liquid chromatography with diode array detector (HPLC-DAD) method for both studied cannabinoids are satisfactory. The usability of the developed method was checked by analysis of real samples of a food supplement–hemp oil enriched with CBD.

Using measured cannabidiol and tetrahydrocannabinol metabolites in urine to differentiate marijuana use from consumption of commercial cannabidiol products

CONTEXT

Detecting marijuana use is a component of most urine drug screens targeting a single Δ⁹-tetrahydrocannabinol metabolite. Recently, the non-intoxicating cannabinoid, cannabidiol (CBD), has gained popular acceptance for a myriad of reasons. Commercially available CBD products sold without purity regulations have become ubiquitous. Many products contain trace tetrahydrocannabinol. Long-term or high dose use of CBD products can result in tetrahydrocannabinol exposures, potentially producing a positive marijuana drug test. These results are not false positives since marijuana biomarkers are present, but inaccurately identify donors as marijuana users. Addressing this conundrum, we developed an assay discriminating marijuana use from the use of CBD contaminated with tetrahydrocannabinol.

METHODS

Following the synthesis of a primary CBD metabolite, a LC-MS/MS assay was developed measuring the urinary metabolites tetrahydrocannabinol, 11-nor-carboxy-Δ⁹-tetrahydrocannabinol, CBD, and 7-carboxy-cannabidiol. The assay was utilized on 425 patients claiming CBD use, and sixteen samples from trusted users of commercial CBD products.

RESULTS AND DISCUSSION

Clear data clusters enabled metabolic cut-points assignments. Forty-three percent of samples contained CBD metabolites in ten-fold excess to tetrahydrocannabinol metabolites which was then used as a set point to classify donors as CBD users. An excess of tetrahydrocannabinol metabolites classify donors as marijuana users. Additionally, urine samples were procured from donors personally known to use commercial CBD ad libitum, yet abstain from tetrahydrocannabinol. Results from trusted users substantiated the use of the resulting metabolic ratios despite 11-carboxy-tetrahydrocannabinol measured in 75% of these samples.

CONCLUSION

A method has been developed and utilized to distinguish marijuana use from tetrahydrocannabinol exposure from contaminated CBD use.

Commercial Hemp Seed Oils: A Multimethodological Characterization

Nine commercial hemp seed oils from different countries were studied using a multimethodological approach to obtain information about their quality and chemical composition. Due to the lack of a specific regulation for hemp seed oils, quality parameters used in the case of olive oils (free acidity, peroxides number, spectrophotometer parameters) and anisidine number were measured and compared with those reported for extra virgin olive oil (EVOO). Free acidity and peroxides number showed a great variability, ranging from 0.4 to 17.24% and from 4.32 to 22.14 meqO2/kg, respectively, whereas the anisidine number ranged from 0.11 to 3.58. K232 value turned out to be generally below the limit reported for EVOO, whereas K270 and ΔK values were higher, with respect to EVOO limits, due to the high amount of tri-unsaturated fatty chains. Colorimetric analysis showed a peculiar curve trend that could represent the fingerprint of this product. Untargeted nuclear magnetic resonance methodology allowed to measure the amount of fatty chains, ω-6:ω-3 ratio, β-sitosterol, and aldehydes. The ω-6:ω-3 ratio turned out to be, in some cases, different from that reported on the bottle labels. Finally, lipoperoxidation assays were also carried out under different storage (light and temperature) and time exposure conditions, confirming that the exposure to direct light is the condition that interferes more with the product quality.

Emerging challenges in the extraction, analysis and bioanalysis of cannabidiol and related compounds

Cannabidiol (CBD) is a bioactive terpenophenolic compound isolated from Cannabis sativa L. It is known to possess several properties of pharmaceutical interest, such as antioxidant, anti-inflammatory, anti-microbial, neuroprotective and anti-convulsant, being it active as a multi-target compound. From a therapeutic point of view, CBD is most commonly used for seizure disorder in children. CBD is present in both medical and fiber-type C. sativa plants, but, unlike Δ⁹-tetrahydrocannabinol (THC), it is a non-psychoactive compound. Non-psychoactive or fiber-type C. sativa (also known as hemp) differs from the medical one, since it contains only low levels of THC and high levels of CBD and related non-psychoactive cannabinoids. In addition to medical Cannabis, which is used for many different therapeutic purposes, a great expansion of the market of hemp plant material and related products has been observed in recent years, due to its usage in many fields, including food, cosmetics and electronic cigarettes liquids (commonly known as e-liquids). In this view, this work is focused on recent advances on sample preparation strategies and analytical methods for the chemical analysis of CBD and related compounds in both C. sativa plant material, its derived products and biological samples. Since sample preparation is considered to be a crucial step in the development of reliable analytical methods for the determination of natural compounds in complex matrices, different extraction methods are discussed. As regards the analysis of CBD and related compounds, the application of both separation and non-separation methods is discussed in detail. The advantages, disadvantages and applicability of the different methodologies currently available are evaluated. The scientific interest in the development of portable devices for the reliable analysis of CBD in vegetable and biological samples is also highlighted.