Three-dimensional imaging using microcomputed tomography for studying tooth macromorphology

Morphology and root canal configuration of maxillary lateral incisors: a systematic review and meta-analysis

The purpose of this study was to explore maxillary lateral incisors (MxLI) intern morphology by analyzing existing literature. We searched five electronical databases (Cochrane, Embase, LILACS, Scopus, MEDLINE via PubMed) using keywords and predefined search terms. Additional studies were identified by cross-referencing and reviewing bibliographies of relevant articles. From 92 initial studies, 27 duplicates were removed, and 65 records screened. After full-text review and hand searching were 19 studies included. The most reported root canal configurations (RCC) of MxLI were Vertucci (Ve) I (1-1-1/1; 78.1-100%), Ve II (2-2-1/1; 0.2-5%), Ve III (1-2-1/1; 0.1-14.6%), Ve IV (2-2-2/2; 0.5%), and Ve V (1-1-2/2; 0.5-4.9%). A meta-analysis of six studies from Europe and Asia indicated sex-differentiated patterns in RCC prevalence: higher occurrences of Ve II (2-2-1/1; OR [95%CI] = 1.19 [0.51, 2.73]), Ve III (1-2-1/1; (OR [95%CI] = 1.72 [0.61, 4.85]), and Ve V (1-1-2/2; (OR [95%CI] = 2.95 [1.02, 8.55]) configurations were noted in males, whereas females predominantly exhibited Ve I (1-1-1/1; [95%CI] = 0.99 [0.97, 1.02]), and Ve IV (2-2-2/2; (OR [95%CI] = 0.11 [0.01, 2.02]). Examination methods varied, with cone beam computed tomography (CBCT) being most commonly (n = 11), followed by staining & clearing (n = 5), and radiographic analysis (n = 1). The predominant RCC in MxLI is type Vertucci I. CBCT is the most common method for assessing the morphology of root canals. However, up to 20% of cases may present with complex and sex-specific patterns, highlighting the need for clinicians to be aware of these differences to prevent complications during endodontic treatments.

Morphology and root canal configuration of maxillary canines: a systematic review and meta-analysis

BACKGROUND

This study assessed the internal morphology of maxillary canines (MxC) through a systematic review of existing literature.

METHODS

Research articles up to June 2024 were retrieved from five electronic databases (MEDLINE via PubMed, Embase, Scopus, LILACS, and Cochrane). Predefined search terms and keywords were used, and potential studies were identified by cross-referencing and bibliographies of the selected articles reviewed.

RESULTS

Two hundred studies were identified, 73 duplicates were removed, 127 records were screened, and 113 were removed after consultation of title and abstract. After full-text consultation and hand searching, finally 22 studies were included. Using the method for describing the root canal configuration (RCC) of Briseño Marroquín et al. (2015) and Vertucci (Ve) (1984), the most frequently reported RCC of MxC were 1-1-1/1 (Ve I, 75.4-100%), 2-2-1/1 (Ve II, 0.1-20%), 1-2-1/1 (Ve III, 0.1-11.6%), 2-2-2/2 (Ve IV, 0.1-0.4%), 1-1-2/2 (Ve V, 0.1-2.4%), 2-1-2/2 (Ve VI, 0.5-1.2%), and 1-2-1/2 (Ve VII, 0.1-0.2%). The meta-analysis of six studies (Europe/Asia) showed that a significantly higher number of RCC of 2-2-1/1 (Ve II) (OR [95%CI] = 1.34 [0.53, 3.41]), 1-2-1/1 (Ve III) (OR [95%CI] = 2.07 [1.01, 4.26]), and 1-1-2/2 (Ve V) (OR [95%CI] = 2.93 [1.07, 8.07]), were observed in males, and 2-2-2/2 (Ve IV) (OR [95%CI] = 0.08 [0.00, 4.00]) in females. No sex differences in the RCC of 1-1-1/1 (Ve I) and 1-2-1/2 (Ve VII) were observed.

CONCLUSIONS

Cone beam computed tomography is the most frequently used method for research on the RCC of MxC. Despite the high prevalence of type 1-1-1/1 (Ve I) RCC in MxC, clinicians should remain vigilant for more complex and sex-differentiated patterns in up to 25% of cases to prevent endodontic treatment complications or failures.

Morphology of the Physiological Foramen: II. Maxillary and Mandibular Premolars

INTRODUCTION

Information concerning the anatomy of the physiological foramen is still limited. The aim of this study was to investigate the distance between the physiological and anatomic apex, the shape and diameter of the physiological foramen in maxillary (Mx) and mandibular premolars (Mn).

METHODS

The anatomy of the apex of 229 maxillary (first: MxP1; second: MxP2) and 221 mandibular premolars (first: MnP1; second: MnP2) from a mixed Swiss-German population was investigated by means of microcomputed tomography and 3-dimensional software imaging.

RESULTS

The following results were obtained in the presence of a main physiological foramen. 1. The distance between the physiological and anatomic foramen was 0.29-0.99 mm (MxP1), 0.21-1.03 mm (MxP2), 0.13-0.8 (MnP1), and 0.15-1.41 (MnP2). 2. The mean narrow and wide diameters of the physiological foramen were 0.19-0.33 mm (MxP1), 0.25-0.42 mm (MxP2), 0.28-0.37 (MnP1), and 0.28-0.40 (MnP2). 3. The most common physiological foramen shape was oval (66.7% MxP1, 89.7% MxP2, 91.8% MnP1, 64.4% MnP2).

CONCLUSION

Considering the recommended preparation sizes based on a size corresponding to the friction, that is at the narrowest point in the area of the apical constriction (physiological foramen), and within the limitations of this ex vivo microcomputed tomography study, a final preparation size could be chosen when considering the pertaining morphologic considerations; yet, to a minimum ISO 30 size.

Micro-computed tomographic analysis of the morphology of maxillary lateral incisors

OBJECTIVE

This study aimed to investigate the morphology of maxillary lateral incisors (MxLI) using micro-computed tomography (micro-CT).

MATERIALS AND METHODS

The root canal configurations (RCC) of maxillary lateral incisors (MxLI) of a mixed Swiss-German population were examined using micro-CT, 3D imaging, and a 4-digit system code indicating the main root canal from coronal to apical thirds and the main foramina number.

RESULTS

The most frequently observed RCC of MxLI were 1-1-1/1 (Vertucci I/Ve I, 80.0%), 1-1-2/2 (Ve V, 7.3%), 1-2-1/1 (Ve III, 6.4%), 2-1-1/1 (Ve II, 1.8%), and 1-1-1/2 (1.8%)(n = 110). Three additional RCC were observed less frequently (0.9%). The MxLI showed one physiological foramen in 89.1%, two in 9.1%, and seldom three (1.8%). Most accessory canals were identified in the apical third of a root (20.0%), and no accessory canals in 72.7% of the samples.

CONCLUSIONS

Detailed information on the internal morphology of MxLI of a Swiss-German population is given. The most frequently observed RCC of MxLI is 1-1-1/1 (Ve I). However, accessory canals may occur in all apical thirds, and 20% of all teeth investigated showed a challenging RCC for clinical treatment.

CLINICAL RELEVANCE

This study offers clinicians comprehensive data on MxLI morphology, emphasizing the significance of understanding varied RCC and accessory canal presence for improving root canal treatment outcomes. Over 25% of teeth exhibited complex RCC or accessory canals, influencing decisions during root canal treatment.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review

INTRODUCTION

Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population.

METHODOLOGY

An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies.

RESULTS

The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 μm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 μm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology.

CONCLUSION

This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Three-dimension model of root canal morphology of primary maxillary incisors by micro-computed tomography study

The success of root canal treatment for deciduous teeth depends upon the shape of the root canal, among other factors. Despite this, there are limited reports on the use of high-resolution micro-CT to describe the root canal morphology of primary maxillary incisors. In this study, we aimed to create a three-dimensional (3D) digital model of the root canal morphology of primary maxillary incisors using microcomputed tomography (micro-CT). To provide a reference for the development of restorative posts for the primary maxillary incisors. Primary maxillary central and lateral incisors (n = 10 each) were analysed. Micro-computed tomography was used to conduct 3D analyses of the root canal system of the primary maxillary incisors. The canal volume and surface area of the primary maxillary central incisors were larger than those of the primary maxillary lateral incisors. The structural model index value was significantly lower in central incisors. At the cervical level and the interface between the cervical and middle one-third cross-sectional levels, the root canals of the primary maxillary lateral incisors were significantly rounder. The labio-palatal dimension and the diameters of the central incisors at the four different levels were significantly smaller than the diameter of the mesio-distal dimension. The taper of the central and lateral incisors gradually increased from the apical one-third to the cervical one-third in the labio-palatal dimension. The data obtained from the 3D analysis of maxillary incisors in this study will contribute to the design of root canal posts.

Age and sex related change in tooth enamel thickness of maxillary incisors measured by cone beam computed tomography

BACKGROUND

To measure adequate enamel thickness of maxillary incisors in planning enamel reduction for a porcelain laminate veneer restoration in relation to chronological age and sex by using cone beam computed tomography (CBCT) in an Iraqi subpopulation.

METHODS

From 81 CBCT images, 324 maxillary incisors were examined. Enamel thickness was measured at both mesial and distal regions of the tooth in three different levels: cervical, middle, and incisal (occlusal) 1/3 at a sagittal section. Measurements were made for the following tooth areas using CBCT: facial enamel thickness at 1, 3, and 5 mm from the cementoenamel junction (CEJ), palatal enamel thickness at 5 mm from the CEJ (5 mm P), facial and palatal enamel thickness at the incisal edge (IFP), mid incisal enamel thickness (IET), and the incisal edge enamel-pulp distance (IEPD). Relationships of enamel thickness with age and sex were evaluated using Independent t-test, Mann-Whitney U-test and the Pearson correlation coefficient, a simple linear regression analysis used for statistical analysis.

RESULTS

Significant differences (P < 0.05) were found in terms of an inverse association between enamel thickness and chronological age at all measurements above the CEJ and the regression model for the mid-incisal enamel thickness was (R2 of 0.4). In contrast, there was an increase in IFP, palatal, and IPED enamel thickness with age. Also, significant differences were found in enamel thickness between males and females, the enamel being thicker in females in relation to facial enamel thickness, enamel palatal thickness above CEJ and IET, while for IEPD, the enamel thickness was greater in males compared to females.

CONCLUSION

The measurements for enamel thickness outcome variables in relation to chronological age revealed significant differences for each measured distance and there were statistically significant differences in enamel thickness between males and females at all measurements except at IFP. These results demonstrate that CBCT can be used for noninvasive, accurate measurements of enamel thickness in both sex.

Internal Morphology of Mandibular Second Premolars Using Micro-Computed Tomography

To examine root canal morphology of mandibular second premolars (Mn2P) of a mixed Swiss-German population by means of micro-computed tomography (micro-CT). Root canal configuration (RCC) of 102 Mn2P were investigated using micro-CT unit (µCT 40; SCANCO Medical AG, Brüttisellen, Switzerland) with 3D software imaging (VGStudio Max 2.2; Volume Graphics GmbH, Heidelberg, Germany), described with a four-digit system code indicating the main root canal from coronal to apical thirds and the number of main foramina. A total of 12 different RCCs were detected. 1-1-1/1 (54.9%) was most frequently observed RCC, followed by 1-1-1/2 (14.7%), 1-1-2/2 (10.8%), 1-2-2/2 (4.9%), 1-1-3/3 (3.9%), 1-1-1/3 (2.9%), 2-1-1/1 (2.9%) and less frequently 1-1-2/3, 1-2-1/2, 2-1-2/2, 1-1-2/5, 1-1-1/4 with each 1.0%. No accessory foramina were present in 35.3%, one in 35.3%, two in 21.6%, three and four in 2.9%, and five in 2.0%. In 55.9% Mn2Ps, accessory root canals were present in apical third and 8.8% in middle third of a root. Connecting canals were observed less frequently (6.9%) in apical and 2.9% in the middle third, no accessory/connecting canals in coronal third. Every tenth tooth showed at least or more than three main foramina. Almost two thirds of the sample showed accessory root canals, predominantly in apical third. The mainly single-rooted sample of Mn2Ps showed less frequent morphological diversifications than Mn1Ps.

Assessment of the canal anatomy of the premolar teeth in a selected Turkish population: a cone-beam computed tomography study

BACKGROUND

Teeth may have additional roots and a different number of root canals. Overlooked root canals may cause endodontic failure. The aim of this study was to investigate the prevalence of root canals and the number of roots of premolars in a selected Turkish population.

MATERIALS AND METHODS

A total of 2,570 teeth from 1,438 patients were evaluated. The cone-beam computed tomography scans of 1,055 maxillary and 1,515 mandibular premolars were examined.

RESULTS

Type IV root canal morphology was observed most frequently in maxillary first premolars (77%), and the rates of single and double channel formations were very similar (51% and 49%, respectively). Of the second maxillary premolars, 57.4% had Type I morphology, and 89.9% of the teeth were single-rooted, while 68.6% had a single root canal. The most common formation was Type I (85%) among mandibular first premolars, and a single root was observed in 95.6% of these teeth. In addition, 87% of the mandibular first premolars had a single root canal. The second mandibular premolars mostly had Type I (95.4%) formation, and 99.3% of the teeth were single-rooted, while 96.9% had a single root canal.

CONCLUSION

According to our findings, 51% of maxillary first premolars had a single root, 79.4% had two root canals, and 77% had Type IV (77%) formation. Maxillary second premolars mostly had Type I formation. In addition, a single root and single root canal formation were most common. Mandibular first premolars generally had a single root and single root canal formation, but 13% had two root canals, and 6.4% had Type V formation. More than 95% of mandibular second premolars had Type I formation.

Assessment of the Root Canal Similarity in Contralateral Mandibular Incisors

INTRODUCTION

The purpose of this study was to determine the degree of similarity between contralateral mandibular incisors utilising 3-dimensional (3D) models obtained from micro-computed tomographic (micro-CT) scans of extracted human teeth. The null hypothesis was that contralateral mandibular incisors do not exhibit matching symmetry.

METHODS

Sixty pairs (n = 120) of extracted mandibular incisors were obtained from 30 patients and scanned with micro-CT with a voxel size of 15.0 μm. 3D virtual models of the pulpal cavities were rendered. Geometric morphometric deviation analysis was performed after mirroring, automatic alignment, and co-registration of the models of contralateral teeth root mean square (RMS) errors were calculated. The quantitative analysis of the 3D models included 6 different geometric parameters. Data sets were examined with a 2-sample Kolmogorov-Smirnov test. Post hoc retrospective power analysis was performed to find statistical power (α = 0.05).

RESULTS

Contralateral pairs had a narrower distribution in deviation than random pairs. Also, contralateral pairs showed a statistically higher similarity coefficient (5 out of 6 geometric parameters) compared to random pairs (P < .001); no difference was found when comparing central to lateral pairs or between Vertucci type I configurations compared to non-type I. RMS errors had significantly lower Contralateral premolars (CPs) values than random pairs (P < .001).

CONCLUSIONS

A high degree of similarity was demonstrated for pairing contralateral mandibular incisors using 3D models. The similarity between contralateral central and lateral incisors suggests that when screened and matched, these 4 teeth might be used in endodontic research where similar root canal anatomy is crucial.

Root and Root Canal Configuration Characterization Using Microcomputed Tomography: A Systematic Review

This systematic review’s objective was to conduct a complete analysis of the literature on the root canal morphology using advanced micro-computed tomography. The electronic web databases PubMed, Scopus, and Cochrane were examined for research papers concerning the chosen keywords, evaluating the root canal morphology using Micro-CT, published up to 2021. The articles were searched using MeSH keywords and searched digitally on four specialty journal websites. DARE2 extended (Database of Attributes of Reviews of Effects) was used to assess bias risk. The information was gathered from 18 published studies that strictly met the criteria for inclusion. In the included studies, a total of 6696 samples were studied. The studies were conducted on either maxillary (n-2222) or mandibular teeth (n-3760), permanent anteriors (n-625), and Third molars (n-89). To scan samples, a Scanco Medical machine in was used in 10 studies, Bruker Micro-CT in 34, and seven other machines were utilized in the rest. Bruker Micro-CT software from Kontich, Belgium, VG-Studio Max 2.2 software from Volume Graphics, Heidelberg, Germany, was the most commonly used software. The minimum Voxel size (resolution) adopted in the included studies was 11.6 µm. However, 60 µm was the maximum. Most studies classified the root canal morphology using Vertucci’s classification system (n-16) and the four-digit system (n-6).

Removal of Accumulated Hard Tissue Debris (AHTD) from Root Canals with an Electric Current Device: A MicroCT Preliminary Report

In modern endodontics, removal of accumulated hard tissue debris (AHTD) from root canals is requested. In the last decade, different irrigating solutions and activation methods have been successfully tested. Sonic activation has been shown to be effective in the removal of AHTD. Electric current has been tested before in restorative dentistry, but not in endodontics. An experimental electric current delivering device was compared in the removal of AHTD, using microCT analyses. Fifteen single-rooted teeth were shaped with TruNatomy system endodontic files and divided into three groups: negative control group: specimens underwent no activation; EA group: specimens were activated with EndoActivator (EA); EB group: specimens were activated with ElectroBond (EB). The 2D images, 3D images and morphometric analysis from the microCT showed a statistically significant increased AHTD removal when EB was used. Results of the present preliminary study showed that the irrigant activation with ElectroBond is encouraging when compared to EndoActivator along the entire root canal system. The AHTD was significantly statistically reduced, validating the clinical use of electric fields in endodontics.

The analysis of root canal curvature and direction of maxillary lateral incisors by using cone-beam computed tomography: A retrospective study

The aim of this study was to investigate root canal curvature and direction of maxillary lateral incisors in Shandong, China.Cone beam computed tomography (CBCT) images of 176 maxillary lateral incisors of 88 patients were collected in Shandong Province, China. Software included with CBCT was used to measure the angle of root canal curvature of maxillary lateral incisors on the maximum bending plane. In addition, the direction of each root canal was recorded. The data were statistically analyzed by SPSS 17.0 software package.The results showed that all the samples had a single canal (Vertucci's type I). The incidence of straight root canals, curved root canals, and S-type root canals was 39.2%, 58%, and 2.8%, respectively. The difference in the mean angle of root canal curvature failed to identify any differences between the left and right side (P > .05). The most curved root canal of maxillary lateral incisors oriented in the palato-distal direction.The maxillary lateral incisors were mainly curved root canals of which the proportion of moderate curvature was the largest. Software included with CBCT would provide some valuable information for root canal instrumentation of maxillary lateral incisors.

Interradicular Canals in 213 Mandibular and 235 Maxillary Molars by Means of Micro-computed Tomographic Analysis: An Ex Vivo Study

INTRODUCTION

Bacteria and/or toxin residuals in the furcation areas of mandibular and maxillary molars can be the cause of persistent periapical tissue inflammation before or after an endodontic treatment.

METHODS

The objective of this ex vivo study was to investigate the frequency of interradicular canals and diverticula in first and second mandibular and first and second maxillary molars by means of micro-computed tomographic imaging. Five hundred thirteen extracted molars, 211 mandibular molars and 302 maxillary molars, were included in this investigation. The area between the pulp chamber floor (PCF) and the furcation area was examined, and the data obtained were evaluated with imaging software that generated the corresponding 3-dimensional images. The results were analyzed by means of descriptive statistics.

RESULTS

Interradicular canals were observed in 2.8% and 0.3% of the mandibular and maxillary molars, respectively. The diverticula (blind-ended interradicular canals) originated either at the furcation area or at the PCF. The diverticula frequency observed in mandibular molars was 3.3% (PCF) and 4.3% (bifurcation). The maxillary molar diverticula frequency observed was 2.0% (trifurcation), with none of them originating at the PCF. Altogether (n = 513) diverticula originated more frequently from the PCF (59.1%) than from the furcation area (40.9%).

CONCLUSIONS

Although interradicular canals as well as diverticula were observed in a relatively small number of the investigated molars, practitioners should always be aware of their existence because without an adequate chemical debridement/disinfection of the pulp chamber root canal system, successful endodontic treatment could be compromised in up to 10% of the cases.

Internal morphology of 101 mandibular canines of a Swiss-German population by means of micro-CT: An ex vivo study

The aim of this study was to investigate the root canal system morphology by means of a root canal configuration (RCC) classification described with a four-digit system, the physiological foramen geometry and accessory canal frequency and morphology, of 101 mandibular canines (MaCa) of a Swiss-German population by means of micro-computed tomography. Micro-CT examination of the MaCa was performed and the obtained images analyzed with a 3D imaging software. In single-rooted MaCas, the most frequently observed RCCs were 1-1-1/1 (74.5%) and 1-1-1/2 (14.3%). Seven other RCCs were less frequently observed with a frequency from 4.1 to 1.0%. One physiological foramen was observed in 80.6% of the MaCas, two in 16.3%, three in 1.0% and four in 2.0%. Accessory and connecting canals were apparent only in the middle and apical root thirds. Two-rooted MaCas occurred less frequently (n = 3). When one physiological foramen was present, the mean size of the narrow and wide diameters were 0.28 mm (± 0.07) and 0.40 mm (± 0.11), while the distance between physiological and anatomical foramen was 0.45 mm (± 0.17). MaCas are predominantly single-rooted teeth with a 1-1-1/1 or 1-1-1/2 RCC. Most MaCas had one physiological foramen with an oval shape.

Root Canal Morphology and Configuration of the Mandibular Canine: A Systematic Review

The aim of this study was to systematically review the root canal morphology and configuration (RCC) of mandibular canines (MaCa). The review was registered in the PROSPERO database (ID-272297) and it was carried out following the PRISMA guidelines. Three electronic databases (MEDLINE via PubMed, Embase, Scopus) were searched. Randomized controlled trials, cross-sectional, cohort, comparative, evaluation and validation studies have been included. The anatomical quality assessment (AQUA) tool was used for a quality assessment of the anatomical studies. Of 910 studies retrieved from the systematic search, 28 studies investigating RCCs were included. Most MaCa were single-rooted (87.9-100%), while two-rooted MaCa were present up to 12.1%. The 1-1-1/1 (35.8-96.4%) was the most commonly reported RCC, followed by 2-2-1/1 (0.2-22.0%) and 1-2-1/1 (0.9-20.0%). A high frequency of 1-1-1/1 RCC in MaCa has been described. Most systematic review reports confirm that two-rooted MaCa are found considerably less frequently than single-rooted ones.

Root canal morphology of the mandibular second premolar: a systematic review and meta-analysis

Background

The aim of this paper was to systematically review the root canal configuration (RCC) and morphology literature of the mandibular second premolar (Mn2P).

Methods

Systematic research of five electronic databases was performed to identify published literature concerning the root canal configuration (RCC) of the Mn2P up through July 2020. Studies were selected according to predefined search terms and keywords inclusion criteria: “root canal configuration”, “root canal system”, “root canal morphology”, “mandibular second premolar”, “mandibular premolars”, “morphology” and “anatomy”. Further possible studies were identified by cross-referencing and screening the bibliographies of the selected articles.

Results

From 1622 retrieved studies, 44 studies investigating the internal morphology of 17,839 Mn2Ps were included. Most examined Mn2Ps were single-rooted (89.5–100%); two-rooted (0.1–8%) and three-rooted (0.1–3.5%) Mn2Ps at lower frequency. Most frequent RCCs reported were 1–1–1/1 (55.3–99.6%) followed by 1–1–2/2 (0.5–57%) and 2–2–2/2 (0.6–18%). The meta-analysis of seven studies demonstrated that a significantly higher number of RCC type 1–2–1/1 (OR [95%CI] = 2.05 [1.27, 3.33]) and 2–2–2/2 (OR [95%CI] = 2.32 [0.65, 8.63]) were observed in male than in female patients.

Conclusions

Different RCC research methods have been reported. Whereas clearing and radiographs were commonly used in the past, CBCT has been prevalent in recent years. A globally high frequency of a 1–1–1/1 RCC in the Mn2P has been reported. Nevertheless, the probability that different, more complicated RCCs can appear in Mn2Ps should not be underestimated and, thus, should be taken into consideration when making decisions during an endodontic treatment.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-021-01668-z.

Automated segmentation and description of the internal morphology of human permanent teeth by means of micro-CT

High-resolution micro-computed tomography is a powerful tool to analyze and visualize the internal morphology of human permanent teeth. It is increasingly used for investigation of epidemiological questions to provide the dentist with the necessary information required for successful endodontic treatment. The aim of the present paper was to propose an image processing method to automate parts of the work needed to fully describe the internal morphology of human permanent teeth. One hundred and four human teeth were scanned on a high-resolution micro-CT scanner using an automatic specimen changer. Python code in a Jupyter notebook was used to verify and process the scans, prepare the datasets for description of the internal morphology and to measure the apical region of the tooth. The presented method offers an easy, non-destructive, rapid and efficient approach to scan, check and preview tomographic datasets of a large number of teeth. It is a helpful tool for the detailed description and characterization of the internal morphology of human permanent teeth using automated segmentation by means of micro-CT with full reproducibility and high standardization.

Root Canal Morphology of 116 Maxillary Second Premolars by Micro-Computed Tomography in a Mixed Swiss-German Population with Systematic Review

INTRODUCTION

The aim of this investigation was to examine the root canal system morphology of maxillary second premolars (Mx2Ps) of a Swiss-German population by means of micro-computed tomography and provide systematic review of the root canal configuration (RCC) literature of Mx2Ps.

METHODS

The RCC, main foramina as well as accessory canals and foramina frequency of 116 Mx2Ps, were investigated by means of micro-computed tomography and 3-dimensional software imaging. The RCC from the coronal to apical thirds of the root as well as the main foramina number were described by using a four-digit system code. The literature review follows the PRISMA guideline analyzing randomized controlled trials and cross-sectional, cohort, comparative, validation, and evaluation studies on RCC in Embase, grey literature, PubMed, and Scopus.

RESULTS

Most frequently observed RCCs of Mx2Ps were 1-1-1/1 (35.3%), 1-1-1/2 (21.6%), and 2-1-1/1 (14.7%). Another 11 less frequent RCCs were observed. All Mx2Ps had 1 root. One main foramen was observed in 59.5% and two in 37.9%. Accessory foramina were observed in 46.6%. Thirty-one percent of the Mx2Ps showed accessory canals. One connecting canal between the buccal and palatal was observed in 12.1%.

CONCLUSIONS

Detailed RCC information of Mx2Ps in a Swiss-German population and the results of a systematic literature review of different populations and research methods used to investigate root canal morphology and configuration of Mx2Ps are given. Within the limitations of the study, a high RCC, connecting and accessory canals variability occur in maxillary second premolars.

Influence of Negotiation, Glide Path, and Preflaring Procedures on Root Canal Shaping-Terminology, Basic Concepts, and a Systematic Review

INTRODUCTION

Negotiation, glide path, and preflaring are essential steps in root canal shaping procedures. This report aimed to discuss the terminology, basic concepts, and clinical considerations of negotiation, glide path, and preflaring procedures and the influence of these steps on root canal shaping.

METHODS

This systematic review was undertaken following Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The protocol has been registered with the International Prospective Register of Systematic Reviews (number CRD42019127021). A comprehensive literature search was performed by 2 independent reviewers using a selected search strategy in 2 electronic databases (PubMed and Scopus) until January 28, 2019. A further search was performed manually in endodontic journals. Studies investigating or comparing at least 1 shaping property resulting from root canal instrumentation with a glide path or preflaring in human extracted teeth or clinical studies were included.

RESULTS

The literature shows that the definition of glide path and preflaring procedures remains controversial, which requires an elaboration in the American Association of Endodontists' Glossary of Endodontic Terms. After the removal of irrelevant and duplicated articles, 98 articles were included. The impact of glide path preparation and preflaring on working length determination, apical file size determination, canal transportation, separation of endodontic files, shaping time, dentinal microcrack formation, and extrusion of debris was discussed. Because of heterogeneity among the included studies, quantitative synthesis was not performed for most of the parameters.

CONCLUSIONS

An evidence-based guideline is needed to define and correlate the basic concepts and current applications of each step of contemporary advancements in root canal instruments. Glide path preparation reduces the risk of debris extrusion, has no influence on the incidence of dentinal crack formation, and improves the preservation of the original canal anatomy. The creation of a glide path may have no impact on Reciproc files (VDW, Munich, Germany) in reaching the full working length. Preflaring increases the accuracy of working length determination. Further randomized clinical trials are required to evaluate the effect of a glide path and preflaring on root canal treatment outcomes.

3-Dimensional Analysis and Systematic Review of Root Canal Morphology and Physiological Foramen Geometry of 109 Mandibular First Premolars by Micro-computed Tomography in a Mixed Swiss-German Population

INTRODUCTION

The aim of this study was to systematically revise the root canal configuration (RCC) literature and to investigate the root canal morphology of mandibular first premolars (Ma1Ps) of 2 populations by means of micro-computed tomographic imaging.

METHODS

This systematic review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines including RCC randomized controlled trials and cross-sectional, cohort, comparative, validation, and evaluation studies. Furthermore, the RCC, physiological foramina, the frequency of accessory and connecting canals, and the physiological foramina morphology of 109 Ma1Ps were investigated by means of micro-computed tomographic imaging. The RCC results are described using a 4-digit system code.

RESULTS

The most frequent RCCs observed were 1-1-1/1 (70.6%), 1-1-2/2 (7.3%), 1-2-2/2 (7.3%), and 1-2-1/1 (5.5%). Accessory canals were observed in 31.2%. Connecting canals were observed in 1-1-2/2 (4.6%), 1-2-2/2 (4.6%), 1-1-2/1 (1.8%), and 1-2-1/1 (1.8%) RCCs. Accessory foramina were observed in 52.3%; 30.3% of the Ma1Ps had 1 accessory foramen, 12.8% had 2, 2.8% had 3, 2.8% had 4, 2.8% had 5, and 0.92% had 6. The narrow and wide diameter mean of 136 physiological foramina was 0.28 mm (±0.9) and 0.37 mm (±0.11) when only 1 physiological foramen was present.

CONCLUSIONS

This study provides detailed root canal morphology of Ma1Ps in a Swiss-German population. Within the limitations of the study, the authors recommend a final physiological foramen preparation size of instrument tip sizes 30-40; yet, such a decision should be carefully considered on an individual basis.

An Ex Vivo Study of Root Canal System Configuration and Morphology of 115 Maxillary First Premolars

INTRODUCTION

The aim of this study was to investigate the root canal system morphology of maxillary first premolars by means of micro-computed tomographic imaging in a Swiss-German population.

METHODS

The root canal configuration (RCC) of 115 maxillary first premolars (Mx1Ps) were investigated by means of micro-computed tomographic imaging and 3-dimensional imaging. The RCC and the physiological foramina results are described by a 4-digit system code.

RESULTS

Twelve different RCCs were observed in 30 single-rooted Mx1Ps; 2-2-2/2 (30.0%), 1-2-2/2 (13.3%), 1-2-1/2 (10%), and 2-2-1/2 (10.0%) were the most frequent ones. Seven different RCCs were observed in 2-rooted Mx1Ps (n = 81) in which the 1-1-1/1 (56.8%), 1-1-1/2 (29.6%), and 1-1-2/2 (8.6%) in the buccal root and 1-1-1/1 (92.6%) and 1-1-1/2 (6.2%) in the palatal root RCCs appeared most frequently. Three-rooted Mx1Ps (n = 4) showed a 1-1-1/1 (100.0%) RCC in all roots. The buccal root canal in 2-rooted Mx1Ps had 1 physiological foramen in 59.3% and 2 in 40.7% and 1 to 6 accessory foramina in 38.2%. The palatal root canal showed 1 physiological foramen in 93.8% and 2 in 6.2% and 1 to 2 accessory foramina in 14.8%. Single-rooted Mx1Ps showed 1 physiological foramen in 10.0%, 2 in 70.0%, 3 in 13.3%, and 4 in 6.7% and 1 to 3 accessory foramina in 46.7%.

CONCLUSIONS

The results of this study provide detailed morphologic RCC information of Mx1Ps in a Swiss-German population. Single-rooted Mx1Ps showed morphologic diversifications more frequently than 2- or 3-rooted Mx1Ps. Within 2-rooted Mx1Ps, the buccal root had higher RCC variety, accessory canals, and foramina number than the palatal root.

3-dimensional Analysis and Literature Review of the Root Canal Morphology and Physiological Foramen Geometry of 125 Mandibular Incisors by Means of Micro-Computed Tomography in a German Population

INTRODUCTION

The aim of this study was to examine the root canal system morphology of mandibular incisors by means of micro-computed tomographic imaging.

METHODS

The root canal configuration, physiological foramina, frequency of accessory and connecting canals, and the size and shape of the physiological foramina of 125 mandibular incisors were investigated by means of micro-CT and 3-dimensional imaging software. Root canal configuration of the coronal, middle, and apical thirds and the physiological foramina number are described by a 4-digit system code.

RESULTS

The most frequent root canal configurations were 1-1-1/1 (56%), 1-2-1/1 (17.6%), and 1-1-1/2 (10.4%); 9 additional different root canal configurations were observed. Single-rooted incisors showed in 80% 1, in 16% 2, and in 4% 3 physiological foramina, respectively. Accessory canals were found in only 13.6% of the investigated teeth. Connecting canals were observed in 36% of the sample, most often in root canal configurations 1-2-1/1 (12.8%) and 2-2-1/1 (7.2%). The morphologic dimensions of a total of 146 physiological foramina were measured. Their mean wide and narrow diameters were 0.24 mm (standard deviation = 0.1 mm) and 0.23 mm (standard deviation = 0.08 mm) when only 1 physiological foramen was present. The physiological foramen shapes observed were oval (56%), round (28.8%), and irregular (15.2%).

CONCLUSIONS

The study provides detailed information about the root canal morphology of anterior teeth in a German population. Within the limitations of the study, the authors recommend according to results obtained in this investigation a final physiological foramen preparation size of ISO 30-35; yet, such a decision should be carefully considered on an individual basis.

Chemical imaging of human teeth by a time-resolved Raman spectrometer based on a CMOS single-photon avalanche diode line sensor

Raman spectroscopy is a powerful analytical tool to be used in many biomedical applications and could be potentially translated into clinical work. The challenge of Raman spectroscopy in biomedical applications is the high inherent fluorescence of biological samples. One promising method to suppress the fluorescence background is to use pulsed lasers and time-gated detectors but the complexity of time-gated systems has hindered their widespread usage. We present here chemical imaging of human teeth by means of a new kind of compact and practical fluorescence-suppressed Raman spectrometer based on a time-resolved 16 × 256 CMOS single-photon avalanche diode (SPAD) line sensor with an integrated 256-channel 3-bit on-chip time-to-digital converter. The chemical images were constructed by utilizing a simple unsupervised machine learning algorithm (k-means clustering). The high quality of Raman spectra measured with the time-resolved CMOS SPAD-based Raman spectrometer was verified by comparing the spectra to those collected with a commercial conventional continuous wave (CW) Raman spectrometer. The spectra measured by using the time-resolved CMOS SPAD-based Raman spectrometer had 4.4-8.8 times higher signal to peak-to-peak noise ratio values than the spectra from the CW Raman spectrometer when the same radiant exposure (∼300 J mm^-2) was used with both spectrometers. This paper shows in practice the potential of time-resolved CMOS SPAD-based Raman spectroscopy in the field of biomedicine and we expect that the presented technology could pave the way for the development of new kind of compact and practical fluorescence-suppressed Raman spectrometers to be used both in biomedical research and clinical settings.

A Horizontal Sequential Cutting Method to Estimate the Effectiveness of Dentin Disinfection by Using Confocal Laser Scanning Microscopy

INTRODUCTION

This study aimed to develop a technique to create sequential slices, allowing the fluorescent visualization of bacterial viability in all parts of an infected dentin.

METHODS

Cylindrical dentin blocks were prepared from freshly extracted human teeth with a single-rooted canal. Each block was immersed in 5% sodium hypochlorite (NaOCl) and 17% EDTA for 5 minutes before being infected with Enterococcus faecalis. The bacteria were allowed to develop inside dentin specimens for 28 days under anaerobic conditions. The specimens were exposed in 2% NaOCl for either 2 minutes or 20 minutes at 20°C, 37°C, and 45°C, respectively. After staining with calcein AM (Thermo Fisher Scientific, Waltham, MA) and propidium iodide, the samples were cryoembedded, mounted on an adhesive film, and sectioned at a thickness of 10 μm along the running of the dentinal tubules. Stacks of fluorescent images were collected in the z dimension using confocal laser scanning microscopy, and the maximum affected distance from a root canal was measured from the 3-dimensional reconstructed image. The reliability of this technique was verified by comparison with a dye bleaching test.

RESULTS

Horizontal sequential sections preserving 3-dimensional bacterial distribution and their viabilities could be made without decalcification. The treatment time contributed to the penetration of NaOCl into dentinal tubules, whereas temperature did not significantly affect the penetration. The judgment by confocal laser scanning microscopic analysis was consistent with that of a dye bleaching test.

CONCLUSIONS

The horizontal sectioning method has the advantage of creating sequential sections, allowing information to be imaged at every portion.

Symmetry of root and root canal morphology of mandibular incisors: A cone-beam computed tomography study in vivo

Background

Aim of this study was to analyze the root canal configuration in mandibular central and lateral incisors in vivo using cone-beam computed tomography (CBCT) imaging.

Material and Methods

A total of 487 mandibular central incisors and 491 mandibular lateral incisors from 250 patients were examined using CBCT imaging, previously taken for diagnosis and treatment. The number of roots, root canal system configuration, presence of apical confluences, distance between confluences and radiographic root end, symmetry between left and right elements were recorded and statistically analyzed.

Results

All the examined teeth presented only one root. No significant differences were found between the prevalence of two root canals in mandibular central incisors (219 teeth, 45%) compared to lateral incisors (211 teeth, 43%).

Conclusions

The percentage of Vertucci type II configuration was higher than expected, being more frequent than type III. Type I was the prevalent, while other configurations were present but rare. Key words:Cone-beam computed tomography, mandibular incisors, root canal anatomy, confluences.

Dentinal dysplasia type 1: A 3D micro-computed tomographic study of enamel, dentine and root canal morphology

Dentine dysplasia type 1 is a rare and complex dental anomaly. Our aim was to conduct a morphometric assessment of a dentinal dysplasia type 1c (DD1c) caries-free mandibular second molar, extracted due to symptomatic apical periodontitis. Controls consisted of five intact mandibular second molars. Micro-computed tomography analysis showed that the DD1c volume % for enamel, dentine/cementum and pulp chamber fell in the 0.36th, 99.97th and 0.09th percentiles of the control teeth (P < 0.01). It also revealed an extremely complicated root canal system in the DD1c tooth with a varying degree of dentine mineralisation and aberrant dentine deposition in the pulp chamber. A crack extending from the external tooth surface to the pulp chamber was identified as a potential site for microbial invasion. Clinical implications include preventive measures and early intervention in reversible pulpitis. Conclusion: Micro-CT imaging can be useful in establishing post-extraction diagnosis of cracks and phenomic characterisation of tooth anomalies.

Comparative Evaluation of Retreatability of Endodontically Treated Teeth using AH 26, Fluoride Varnish and Mineral Trioxide Aggregate-based Endodontic Sealers

Background and Objectives:

Endodontic sealers are used to fill the gap between the root filling material and canal walls. Retrievability is an important requirement for sealers and root filling materials in non-surgical endodontic retreatment. This study sought to assess the retreatability of fluoride varnish, AH 26 and Mineral Trioxide Aggregate (MTA)-based sealers using Cone-Beam Computed Tomography (CBCT).

Materials and Methods:

This in vitro, experimental study evaluated 45 extracted single-rooted, single-canal human mandibular premolars. Teeth with cracks or fracture were excluded. The root canals were prepared using ProTaper Universal rotary system up to size F4 according to the manufacturer’s instructions. The teeth were then randomly divided into three groups of 5% fluoride varnish, AH 26 and MTA Fillapex. CBCT scans were obtained of the teeth with 200 μm voxel size. MATLAB R2012 software was used to quantify the amount of sealer remaining in the canal. Two observers evaluated the images. Data were analyzed using SPSS via the Kruskal-Wallis and Mann Whitney tests.

Results:

The amount of sealer remaining in the root canals was significantly different among the three groups (P<0.05). The amount of AH 26 sealer remaining in the root canals (1.91±1.46) was significantly greater than MTA Fillapex (0.62±0.26) and fluoride varnish, but the latter two were not significantly different in this respect (P>0.05).

Conclusion:

Considering the adequate adhesion of fluoride varnish to dentin, its cariostatic effect and low cost, it seems to be a suitable alternative to the commonly used endodontic sealers.

Detecting the Second Mesiobuccal Canal in Maxillary Molars in a Saudi Arabian Population: A Micro-CT Study

The aim of this study was to determine MB2 canal detectability in maxillary first and second molars obtained from a Saudi population using micro-CT. Maxillary first (n = 35) and second (n = 30) molars were scanned with micro-CT technology. The number of canals was recorded, and in case of having more than one canal, the level of extracanal detection was analyzed. The presence of extracanal was categorized based on the level they were first detected. Among the maxillary first molars, 28 (80%) and six (17%) teeth had two and three MB canals, respectively. Among the maxillary second molars, 24 (80%) and four (13%) teeth had two and three MB canals, respectively. The MB2 canal was detected at the chamber floor in 70% and 61% of the maxillary first and second molars, respectively. At 1 mm depth, the MB2 canal was found in 15% and 18% of the maxillary first and second molars, respectively. At 2 mm depth, the MB2 canal was found in 3% and 18% of the maxillary first and second molars, respectively. The remaining teeth had the MB2 canal at levels deeper than 2 mm. The MB2 canal was detected in 97% and 93%% of maxillary first and second molars, respectively. Among them, the MB2 canal could be immediately detected in 70% and 61% of the maxillary first and second molars, respectively, once the pulp chamber is exposed. However, the rest of the MB2 were observed at deeper levels in the root and this requires troughing preparation in the chamber floor.

Cone-Beam Computed Tomographic Evaluation of Root Canal Morphology of Maxillary Premolars in a Saudi Population

Objective

The aim of the study was to investigate the root canal morphology of maxillary first and second premolars in a Saudi population using Cone-Beam Computed Tomography (CBCT).

Methods

This retrospective cross-sectional study assessed CBCT images of 707 Saudi patients. The number of roots and canal configuration were identified based on Vertucci's classification. Fisher's exact Chi-square tests were performed to analyze the association between sex and number of roots and sex and root canal configuration.

Results

Most teeth had two roots in maxillary first premolars (75.1%) and one root in maxillary second premolars (85.2%). Type IV was the most prevalent canal configuration in maxillary first premolars (69.1%), while Type I was the most in maxillary second premolars (49.4%). All types of canal configurations were observed in maxillary premolars except Type VII for the maxillary second premolar. Chi-square tests showed no significant association between gender and number of roots and sex and root canal configuration in both maxillary first and second premolars although higher number of roots was seen in men (P > 0.05).

Conclusion

Most maxillary first premolars had two roots with Type IV being the most predominant canal configuration, while a single root with Type I canal configuration was the most frequently observed morphology in maxillary second premolars. In maxillary first premolars, 21.3% had one canal apically, 75.4% had two canals apically, and 3.3% had three canals apically. In maxillary second premolars, 80.2% had one canal apically, 18.9% had two canals apically, and 0.9% had three canals apically.

Comparative evaluation of apical constriction position in incisor and molar teeth: An in vitro study

Objective:

The apical constriction (AC) and the apical foramen (AF) are the principal reference points used to determine the apical limit for instrumentation and root canal filling. AC varies in different races, and the aim of the current study was to measure and compare the distances from AC to AF and the anatomical apex (AA) in incisor and molar teeth in the Iranian population.

Materials and Methods:

Forty-five roots of incisor teeth and 45 roots of molar teeth were selected randomly in Isfahan Province, Iran. If the foramen was located toward the mesial or distal side of the apex, the cut was made mesiodistally, and if it was toward the buccal or lingual side, the section was made accordingly. Roots were examined under a microscope at ×25 magnification. The distances from AC to AF and AA were then estimated using a Motic camera. Descriptive statistics were used. The independent t-test was also used to compare distances in incisors and molars, and P = 0.05 was deemed to indicate statistical significance.

Results:

The mean distances between AC and AF were 0.847 ± 0.33 mm in incisors and 0.709 ± 0.27 mm in molars. The mean distances between AC and AA were 1.23 ± 0.39 mm in incisors and 1.01 ± 0.38 mm in molars. In an independent t-test, the distances between AC and AF differed significantly in incisors and molars (P = 0.035), but the distances between AC and AA did not (P = 0.172).

Conclusion:

The end points for root canal therapy should be 0.85 mm in incisors and 0.70 mm in molars.

Three-dimensional analysis of the physiological foramen geometry of maxillary and mandibular molars by means of micro-CT

The aim of this study was to investigate the physiological foramen diameter, shape and distance between physiological and anatomical apex of maxillary and mandibular first and second molars. Accurate knowledge of the physiological foramina morphology; thus, inherent mechanical shaping technical hindrances, is decisive when taking the corresponding root canal final preparation decision. The morphological dimensions of a total of 1727 physiological foramina were investigated by means of micro-computed tomography. Mean narrow and wide (to a high number, oval) diameters of the physiological foramen were 0.24, 0.22 and 0.33 mm and 0.33, 0.31 and 0.42 mm in mesiobuccal (MB), distobuccal (DB) and palatal (P) roots in maxillary first molars; 0.24, 0.22 and 0.33 mm and 0.41, 0.33 and 0.44 in MB, DB, and P roots in maxillary second molars. Mandibular first molars showed mean narrow and wide diameters of 0.24 and 0.30 mm and of 0.39 and 0.46 mm in mesial (M) and distal (D) roots; second mandibular molars showed 0.25 and 0.31 mm and 0.47 mm in M and D roots. The mean distance between the physiological foramina and anatomical apex was 0.82, 0.81 and 1.02 mm and 0.54, 0.43 and 0.63 mm in MB, DB and P roots of the maxillary first and second molars, respectively. A mean distance of 0.95 mm (M) and 1.05 mm (D) in the first and 0.78 mm (M) and 0.81 mm (D) in the second mandibular molars was observed. Based on the results obtained, assumable recommendations for final preparation size of the physiological foramen were calculated. However, when taking into consideration, the resulting standard deviations of marginal errors must be cautiously considered when taking a final decision in clinical endodontic treatment.

Evaluation of the root and canal systems of maxillary molars in Taiwanese patients: A cone beam computed tomography study

Background

This study evaluated variations in root canal configuration in the maxillary permanent molars of Taiwanese patients by analyzing patients' cone beam computed tomography (CBCT) images. Comparisons were made among these configurations and those previously reported. This information may serve as a basis for improving the success rate of endodontic treatment.

Methods

The root canal systems of 114 Taiwanese patients with bilateral maxillary first or second molars were examined using CBCT images. The number of roots, canals per root, and additional mesiobuccal (MB) canals, as well as the canal configuration were enumerated and recorded.

Results

Of the 196 maxillary first molars examined, three (1.5%) had a single root, two (1.0%) had two roots, and 191 (97.5%) had three separate roots. Out of all first molar roots examined, 44% of mesiobuccal (MB) roots had a single canal and the remainder had a second MB (MB2) canal. Of the 212 maxillary second molars examined, 16 (7.1%) had a single root, 51 (24.2%) had two roots, 143 (67.8%) had three roots, and two (0.9%) had four separate roots. For the MB roots, 92.3% of three-rooted maxillary second molars had a single canal and the remainder had an MB2 canal. In all three-rooted maxillary first and second molars, each of the distal and palatal roots had one canal.

Conclusions

The root canal configurations of the MB roots of maxillary molars were more varied than those of the distobuccal and palatal roots, and the root canal configurations of maxillary second molars were more varied than those of the first molars. These findings demonstrate CBCT as a useful clinical tool for endodontic diagnosis and treatment planning.

Root canal morphology and configuration of 123 maxillary second molars by means of micro-CT

The aim of this study was to investigate the root canal configuration, accessory canals and number of main foramina of 123 maxillary second molars by means of micro-computed tomography. The teeth were scanned and reproduced with 3D software imaging. The root canal configuration and number of main foramina were evaluated by means of a four-digit system. The morphological complexity of human maxillary second molars is depicted by the number of accessory and connecting canals. The most frequently observed root canal configurations in the mesiobuccal root were 2-2-2/2 (19.5%), 2-2-1/1 (14.6%) and 2-1-1/1 (13.0%). A 1-1-1/1 configuration was observed in 93.5% and in 96.7% in the distobuccal and palatal roots, respectively. The MB1 root canal had one accessory canal (18.7%), and 8.9% of the MB2 root canal had one or two accessory canals. The distobuccal (11.3%) and palatal (14.6%) root canals had at least one accessory canal, and connecting canals were observed in 16.3% of mesiobuccal roots. The MB1, MB2, distobuccal and palatal root canals had one main foramen in 99.2%, 43.1%, 98.4% and 99.2% of samples, respectively. In the mesiobuccal root, one accessory foramen was detected in 14.6%, two were detected in 7.3%, and three were detected in 5.7%. The distobuccal root showed one or two accessory foramina in 9.1% of samples. The root canal configuration of maxillary second molars is quite heterogeneous; the mesiobuccal root has predominantly two root canal entrances (58.4%, 1 in 41.1%) with one main foramen (54.4%). Two main foramina were observed in 43.0%. Morphological variations, connecting and accessory canals were observed in all apical thirds.

Evaluation of root canal morphology of maxillary second premolars in a Saudi Arabian sub-population: An in vitro microcomputed tomography study

AIM

To investigate the root canal morphology of maxillary second premolars in a Saudi Arabian subpopulation using microcomputed tomography (micro-CT).

METHODOLOGY

Micro-CT analysis was performed on 100 maxillary second premolars. The anatomy of each tooth (number of roots, canals, orifices, and apical foramina, and the presence of apical deltas and accessory canals) was analyzed from reconstructed three-dimensional images.

RESULTS

The most common morphology was a single root (67%), followed by two roots (30%), and three roots (3%). Regarding the canal morphology, most teeth (65%) contained two canals, followed by 30% with one canal, and 5% with three canals. One orifice was observed in 55% of teeth, and two orifices were detected in 45% of teeth. According to the Vertucci classification, the most common canal types were IV and V (both found in 23% of teeth), followed by type I (17%), type III (9%), type II (7%), and type VII (2%). Additional types that were inconsistent with the Vertucci classification were recorded in 19% of teeth.

CONCLUSION

The root canal morphology of maxillary second premolars in the Saudi Arabian subpopulation is complex and requires cautious evaluation prior to endodontic treatment.

Establishment of a rat model of chronic thoracolumbar cord compression with a flat plastic screw

Previous studies of animal models of chronic mechanical compression of the spinal cord have mainly focused on cervical and thoracic lesions, but few studies have investigated thoracolumbar injury. The specific pathophysiological mechanism of chronic thoracolumbar cord injury has not yet been elucidated. The purpose of this study was to improve animal models of chronic thoracolumbar cord compression using the progressive screw. A custom-designed flat plastic screw was implanted in the spinal cord between thoracic vertebrae 12 and lumbar 1 of rats. The screw was tightened one complete turn (0.5 mm) every 7 days for 4 weeks to create different levels of chronic spinal cord compression. Following insertion of the screw, there was a significant decline in motor function of the hind limbs, and severe stenosis of micro-computed tomography parameters in the spinal cord. Cortical somatosensory evoked potential amplitudes were reduced remarkably, and latencies were prolonged at 30 minutes after surgery. The loss of motor neurons in the gray matter was marked. Demyelination and cavitation were observed in the white matter. An appropriate rat model of chronic thoracolumbar cord compression was successfully created using the progressive screw compression method, which simulated spinal cord compression injury.

Complex Odontoma: A Case Report with Micro-Computed Tomography Findings

Odontomas are the most common benign tumors of odontogenic origin. They are normally diagnosed on routine radiographs, due to the absence of symptoms. Histopathologic evaluation confirms the diagnosis especially in cases of complex odontoma, which may be confused during radiographic examination with an osteoma or other highly calcified bone lesions. The micro-CT is a new technology that enables three-dimensional analysis with better spatial resolution compared with cone beam computed tomography. Another great advantage of this technology is that the sample does not need special preparation or destruction in the sectioned area as in histopathologic evaluation. An odontoma with CBCT and microtomography images is presented in a 26-year-old man. It was first observed on panoramic radiographs and then by CBCT. The lesion and the impacted third molar were surgically excised using a modified Neumann approach. After removal, it was evaluated by histopathology and microtomography to confirm the diagnostic hypothesis. According to the results, micro-CT enabled the assessment of the sample similar to histopathology, without destruction of the sample. With further development, micro-CT could be a powerful diagnostic tool in future research.

Accuracy of CBCT, Digital Radiography and Cross-Sectioning for the Evaluation of Mandibular Incisor Root Canals

Introduction:

The aim of this study was to compare the accuracy of cone-beam computed tomography (CBCT), digital radiography and tooth sectioning in evaluating root canal morphology of mandibular incisors in an in vitro setting.

Methods and Materials:

A total of 76 samples were imaged using CBCT, and digital radiography in straight and angled views. The samples were then sectioned at different distances from the apex for further visualization under stereomicroscope. The agreement between the observers was statistically analyzed by kappa correlation coefficient and the chi-square test.

Results:

The results showed that the majority of the samples had a single canal (Vertucci’s Type I). CBCT analysis reported more frequent multi-canal roots in comparison with the other techniques. In pairwise comparisons, the highest agreement was found between digital radiographic imaging and microscopic cross-sectioning both in terms of canal configuration and the number of root canals.

Conclusion:

None of the used imaging techniques per se could adequately show the exact internal anatomical configuration in accordance with the gold standard.

Root Canal Morphology and Configuration of 118 Mandibular First Molars by Means of Micro-Computed Tomography: An Ex Vivo Study

INTRODUCTION

The aim of this study was to investigate the root canal system morphology of the mandibular first molar by means of micro-computed tomography.

METHODS

The root canal configuration, foramina, and accessory canals frequency of 118 mandibular first molars were investigated by means of micro-computed tomography and 3-dimensional software imaging. A 4-digit system describes the root canal configuration from the coronal to apical thirds and the main foramina number.

RESULTS

The most frequent root canal configurations in mesial root were 2-2-2/2 (31.4%), 2-2-1/1 (15.3%), and 2-2-2/3 (11.9%); another 24 different root canal configurations were observed in this root. A 1-1-1/1 (58.5%), 1-1-1/2 (10.2%), and 16 other root canal configurations were observed in the distal root. The mesiobuccal root canal showed 1-4 foramina in 24.6%, and the mesiolingual showed 1-3 foramina in 28.0%. One connecting canal between the mesial root canals was observed in 30.5% and 2 in 3.4%. The distolingual root canal showed 1-4 foramina in 23.7%, whereas a foramen in the distobuccal root canal was rarely detected (3.4%). The mesiobuccal, mesiolingual, and distolingual root canals showed at least 1 accessory canal (14.3, 10.2, and 4.2%, respectively), but the distobuccal had none.

CONCLUSIONS

The root canal configuration of mandibular first molars varies strongly. According to our expectations, both the mesial and distal roots showed a high number of morphologic diversifications. The root canal system of the mesial root showed more root canal configuration variations, connecting and accessory canals than the distal root.

Comparative accuracy of the Clearing Technique, CBCT and Micro-CT methods in studying the mesial root canal configuration of mandibular first molars

AIMS

To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard.

METHODOLOGY

Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 μm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 μm and 150 μm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%.

RESULTS

Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05).

CONCLUSION

Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.

Discovering Hominins - Application of Medical Computed Tomography (CT) to Fossil-Bearing Rocks from the Site of Malapa, South Africa

In the South African context, computed tomography (CT) has been used applied to individually prepared fossils and small rocks containing fossils, but has not been utilized on large breccia blocks as a means of discovering fossils, and particularly fossil hominins. Previous attempts at CT imaging of rocks from other South African sites for this purpose yielded disappointing results. For this study, 109 fossil- bearing rocks from the site of Malapa, South Africa were scanned with medical CT prior to manual preparation. The resultant images were assessed for accuracy of fossil identification and characterization against the standard of manual preparation. The accurate identification of fossils, including those of early hominins, that were not visible on the surface of individual blocks, is shown to be possible. The discovery of unexpected fossils is reduced, thus lowering the potential that fossils could be damaged through accidental encounter during routine preparation, or even entirely missed. This study should significantly change the way fossil discovery, recovery and preparation is done in the South African context and has potential for application in other palaeontological situations. Medical CT imaging is shown to be reliable, readily available, cost effective and accurate in finding fossils within matrix conglomerates. Improvements in CT equipment and in CT image quality are such that medical CT is now a viable imaging modality for this palaeontological application.

Root Canal Morphology and Configuration of 179 Maxillary First Molars by Means of Micro-computed Tomography: An Ex Vivo Study

INTRODUCTION

The objective of this study was to propose a root canal configuration description method and to investigate the root canal system morphology of the maxillary first molar by means of micro-computed tomographic imaging.

METHODS

The root canal configuration, foramina, and accessory canal frequency of 179 maxillary first molars were investigated by means of micro-computed tomographic imaging and 3-dimensional software imaging. The root canal configuration and main foramina number are described from coronal to apical with a 4-digit system.

RESULTS

The most frequent root canal configurations were 1-1-1/1 (45.8%), 2-2-2/2 (25.1%) and 2-2-1/1 (10.1%) in mesiobuccal roots and 1-1-1/1 in distobuccal (97.2%) and palatal (98.9%) roots. The first mesiobuccal (MB1) root canal had 1 accessory canal in 26.3% of the teeth, the distobuccal root canal had 12.3%, and the palatal root canal had 9.5%; in the second mesiobuccal root canal, there was rarely 1 accessory canal. There was 1 accessory canal in 26.3%, 12.3%, and 9.5% in the MB1, distobuccal, and palatal root canals, respectively. The MB1, distobuccal, and palatal root canals had 1 main foramen. The MB2 had 1 main foramen in 39.0% of the teeth and no main foramen in 61.0%.

CONCLUSIONS

The root canal configuration of maxillary first molars is quite diversified. Contrary to our expectations in this research, the mesiobuccal root has predominantly 1 root canal entrance and only 1 main foramen. Anatomic variations including connecting and accessory canals occur in any third of root.

A Cone-Beam Computed Tomographic Study on Mandibular First Molars in a Chinese Subpopulation

The purpose of this study was to conduct a cone-beam computed tomographic (CBCT) investigation on the root and canal configuration of the mandibular first molars, especially the morphology of the disto-lingual (DL) root, in a Chinese subpopulation. A total of 910 CBCT images of the mandibular first molars were collected from 455 patients who underwent CBCT examinations as a preoperative assessment for implants or orthodontic treatment. The following information was analyzed and evaluated: tooth position, gender, root and root canal number per tooth, root canal type of the mesial root(s) and distal root(s), angle of the DL root canal curvature, distance between two distal canal orifices in the teeth with DL root, and angle of disto-buccal canal orifice–disto-lingual canal orifice–mesio-lingual canal orifice (DB-DL-ML). Most of the mandibular first molars (64.9%, n = 591) had two roots with three root canals, and most of the mesial root canals (87.7%, n = 798) were type VI. The prevalence of the DL root was 22.1% (n = 201). The right side had a higher prevalence of DL root than the left side (p<0.05). Additionally, the curvature of the DL root canal were greater in the bucco-lingual (BL) orientation (30.10°±14.02°) than in the mesio-distal (MD) orientation (14.03°± 8.56°) (p<0.05). Overall there was a high prevalence of DL root in the mandibular first molars, and most of the DL roots were curved in different degrees. This study provided detailed information about the root canal morphology of the mandibular first molars in a Chinese subpopulation.

Comparison of mandibular first molar mesial root canal morphology using micro-computed tomography and clearing technique

OBJECTIVE

Micro-computed tomography (MCT) with alternative image reformatting techniques shows complex and detailed root canal anatomy. This study compared two-dimensional (2D) and 3D MCT image reformatting with standard tooth clearing for studying mandibular first molar mesial root canal morphology.

MATERIALS AND METHODS

Extracted human mandibular first molar mesial roots (n=31) were scanned by MCT (Skyscan 1172). 2D thin-slab minimum intensity projection (TS-MinIP) and 3D volume rendered images were constructed. The same teeth were then processed by clearing and staining. For each root, images obtained from clearing, 2D, 3D and combined 2D and 3D techniques were examined independently by four endodontists and categorized according to Vertucci's classification. Fine anatomical structures such as accessory canals, intercanal communications and loops were also identified.

RESULTS

Agreement among the four techniques for Vertucci's classification was 45.2% (14/31). The most frequent were Vertucci's type IV and then type II, although many had complex configurations that were non-classifiable. Generally, complex canal systems were more clearly visible in MCT images than with standard clearing and staining. Fine anatomical structures such as intercanal communications, accessory canals and loops were mostly detected with a combination of 2D TS-MinIP and 3D volume-rendering MCT images.

CONCLUSIONS

Canal configurations and fine anatomic structures were more clearly observed in the combined 2D and 3D MCT images than the clearing technique. The frequency of non-classifiable configurations demonstrated the complexity of mandibular first molar mesial root canal anatomy.

Alterations of the Danger Zone after Preparation of Curved Root Canals Using WaveOne with Reverse Rotation or Reciprocation Movements

Introduction:

The aim of this study was to compare the changes that occur in the danger zone (DZ) after preparation of curved mesiobuccal (MB) canals of mandibular first molars with WaveOne instruments in two different movements [reciprocation (RCP) and counter-clockwise rotation (CCWR)] by means of cone-beam computed tomography (CBCT).

Methods and Materials:

MB canals of 30 mandibular molars were randomly divided into 2 groups (n=15); WaveOne/RCP and WaveOne/CCWR. Pre- and post-instrumentation CBCT images were assessed for changes in the dentin thickness in DZ (2 and 4 mm below the highest point of the root furcation) in both groups. Data was analyzed using the repeated measures ANOVA test.

Results:

There was no statistically significant difference between two experimental groups in terms of remaining dentin thickness at 2 and 4 mm levels below the highest point of the furcation (P>0.05).

Conclusion:

The efficacy of WaveOne instrument on changes of the dentin thickness in the DZ was not affected by different file movements.

Root and canal morphology of maxillary first premolar teeth in north Indian population using clearing technique: An in vitro study

Aim:

The purpose of this study was to determine the root form and canal configuration in maxillary first premolars.

Materials and Methods:

A total of 250 extracted human adult maxillary first premolar teeth from North Indian population were collected. Access cavities were prepared and the coronal pulp tissue was extirpated. The samples were stored in 5% nitric acid solution for 5 days. They were then rinsed, dried, and dehydrated using increasing concentrations of ethanol (70, 80, and 95%) successively for 1 day. Teeth were rendered transparent by immersing in methyl salicylate. India ink was then injected. The root canal morphology was examined under stereomicroscope.

Result:

53.6% were single rooted followed by fused root form followed by two root form. 0.4% had three rooted maxillary first premolar. Variable root canal configurations were also found. Type IV configuration was most prevalent (33.2%). Two teeth showed an additional configuration. Lateral canals were present in 34.8% of the samples and intercanal communications in 16%.

Conclusion:

Within the limitations of this study, it was concluded that in North Indian population, there was an increased propensity for types IV, I, II, and III canal morphologies in maxillary first premolars. Single root form was most common.