Multilayer structures in lipid monolayer films containing surfactant protein C: effects of cholesterol and POPE

Understanding the Retention of Vaping Additives in the Lungs: Model Lung Surfactant Membrane Perturbation by Vitamin E and Vitamin E Acetate

Deviations from the normal physicochemical and functional properties of pulmonary surfactants are associated with the incidence of lung injury and other respiratory disorders. This study aims to evaluate the alteration of the 2D molecular organization and morphology of pulmonary surfactant model membranes by the electronic cigarette additives α-tocopherol (vitamin E) and α-tocopherol acetate (vitamin E acetate), which have been associated with lung injury, termed e-cigarette or vaping-use-associated lung injury (EVALI). The model membranes used contained a 7:3 molar ratio of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol) to which α-tocopherol and α-tocopherol acetate were added to form mixtures of up to 20 mol % additive. The properties of the neat tocopherol additives and DPPC/POPG (7:3) mixtures with increasing molar proportions of additive were evaluated by surface pressure-area isotherms, excess area calculations, Brewster angle microscopy, grazing incidence X-ray diffraction, X-ray reflectivity, and atomic force microscopy. The addition of either additive alters the essential phase balance of the model pulmonary surfactant membrane by generating a greater proportion of the fluid phase. Despite this net fluidization, both tocopherol additives have space-filling effects on the liquid-expanded and condensed phases, yielding negative excess areas in the liquid-expanded phase and reduced tilt angles in the condensed phase. Both tocopherol additives alter the stability of the fluid phase, pushing the eventual collapse of this phase to higher surface pressures than the model membrane in the absence of an additive.

Lung surfactant as a biophysical assay for inhalation toxicology

Lung surfactant (LS) is a mixture of lipids and proteins that forms a thin film at the gas-exchange surfaces of the alveoli. The components and ultrastructure of LS contribute to its biophysical and biochemical functions in the respiratory system, most notably the lowering of surface tension to facilitate breathing mechanics. LS inhibition can be caused by metabolic deficiencies or the intrusion of endogenous or exogenous substances. While LS has been sourced from animals or synthesized for clinical therapeutics, the biofluid mixture has also gained recent interest as a biophysical model for inhalation toxicity. Various methods can be used to evaluate LS function quantitatively or qualitatively after exposure to potential toxicants. A narrative review of the recent literature was conducted. Studies focused whether LS was inhibited by various environmental contaminants, nanoparticles, or manufactured products. A review is also conducted on synthetic lung surfactants (SLS), which have emerged as a promising alternative to conventional animal-sourced LS. The intrinsic advantages and recent advances of SLS make a strong case for more widespread usage in LS-based toxicological assays.

Structural Changes in Films of Pulmonary Surfactant Induced by Surfactant Vesicles

When compressed by the shrinking alveolar surface area during exhalation, films of pulmonary surfactant in situ reduce surface tension to levels at which surfactant monolayers collapse from the surface in vitro. Vesicles of pulmonary surfactant added below these monolayers slow collapse. X-ray scattering here determined the structural changes induced by the added vesicles. Grazing incidence X-ray diffraction on monolayers of extracted calf surfactant detected an ordered phase. Mixtures of dipalmitoyl phosphatidylcholine and cholesterol, but not the phospholipid alone, mimic that structure. At concentrations that stabilize the monolayers, vesicles in the subphase had no effect on the unit cell, and X-ray reflection showed that the film remained monomolecular. The added vesicles, however, produced a concentration-dependent increase in the diffracted intensity. These results suggest that the enhanced resistance to collapse results from enlargement by the additional material of the ordered phase.

Alveolar lipids in pulmonary disease. A review

Lung lipid metabolism participates both in infant and adult pulmonary disease. The lung is composed by multiple cell types with specialized functions and coordinately acting to meet specific physiologic requirements. The alveoli are the niche of the most active lipid metabolic cell in the lung, the type 2 cell (T2C). T2C synthesize surfactant lipids that are an absolute requirement for respiration, including dipalmitoylphosphatidylcholine. After its synthesis and secretion into the alveoli, surfactant is recycled by the T2C or degraded by the alveolar macrophages (AM). Surfactant biosynthesis and recycling is tightly regulated, and dysregulation of this pathway occurs in many pulmonary disease processes. Alveolar lipids can participate in the development of pulmonary disease from their extracellular location in the lumen of the alveoli, and from their intracellular location in T2C or AM. External insults like smoke and pollution can disturb surfactant homeostasis and result in either surfactant insufficiency or accumulation. But disruption of surfactant homeostasis is also observed in many chronic adult diseases, including chronic obstructive pulmonary disease (COPD), and others. Sustained damage to the T2C is one of the postulated causes of idiopathic pulmonary fibrosis (IPF), and surfactant homeostasis is disrupted during fibrotic conditions. Similarly, surfactant homeostasis is impacted during acute respiratory distress syndrome (ARDS) and infections. Bioactive lipids like eicosanoids and sphingolipids also participate in chronic lung disease and in respiratory infections. We review the most recent knowledge on alveolar lipids and their essential metabolic and signaling functions during homeostasis and during some of the most commonly observed pulmonary diseases.

Physical properties of phospholipids and integral proteins and their biofunctional roles in pulmonary surfactant from molecular dynamics simulation

This work deals with a quantitative investigation of the physical properties of pulmonary surfactant near melting temperature. To this end, we make use of molecular dynamics simulations, using the MARTINI coarse-grained model, for determining the physical properties of the system, such as the potential energy, the specific heat, the microstructure, the diffusion laws, and the elastic properties of the surfactant. The microstructure is studied by computation of the radial-distribution-function upon varying the distance between constituents (lipid molecules or proteins). The diffusion phenomenon is investigated by determination of the mean-squared-displacement and the time dependent velocity-autocorrelation-function for various values of temperature. We show that the dynamics of lipids and proteins exhibit a subdiffusion regime (slow movement) due to the cage effect within pulmonary surfactant. From the obtained mean-squared-displacement, we get the values of the self-diffusion-coefficients and the anomalous exponents at different temperatures close to the melting temperature. For the mathematical description of the cage effect, we make use of the scale relations in terms of the waiting time probability distribution. The last study is concerned with determination of the dependence of the lateral stress upon the strain of pulmonary surfactant, which is found to be linear, and from which we deduce the lateral-elastic-modulus.

This work deals with a quantitative investigation of the physical properties of pulmonary surfactant near melting temperature.

Mechanical Properties of DPPC-POPE Mixed Langmuir Monolayers

The mechanical properties of lipid monolayers and their responses to shear and compression stresses play an important role in processes such as breathing and eye blinking. We studied the mechanical properties of Langmuir monolayers of a model mixture, composed of an unsaturated lipid, 1-palmitoyl-2-oleoyl-sn-glycero-phosphoethanolamine (POPE), and a saturated lipid, 1,2-dipalmitoyl-sn-glycero-phosphocholine (DPPC). We performed isothermal compressions and sinusoidal shear deformations of these mixed monolayers. Also, the different phases were observed with Brewster angle microscopy. We found that the mechanical behavior is affected by the miscibility of both lipids. In the two-phase region, the compression elastic modulus increases with the amount of the LC phase but does not follow the predictions of a simple effective medium model. The discrepancies arise from the fact that, upon compression, the domains grow at a rate faster than the compression rate but not fast enough to reach thermodynamic equilibrium. Before reaching the LC phase, domain percolation is observed and compression and shear moduli become equal to those of the pure LC phase. Most of the monolayers behave as viscoelastic fluids at the frequencies investigated. A minimum in the compression modulus and shear viscosity was observed for mixtures close to equimolar composition, with the minimum being accompanied by a change in domain shapes.

Understanding the interactions of imidazolium-based ionic liquids with cell membrane models

IL–phospholipid interactions were studied using Langmuir monolayers and molecular simulations.

Developing an exogenous pulmonary surfactant-glucocorticoids association: Effect of corticoid concentration on the biophysical properties of the surfactant

Glucocorticoids (GCs) are used to treat lung disease. GCs incorporated in an exogenous pulmonary surfactant (EPS) could be an alternative management to improve drug delivery avoiding side effects. In the development of these pharmaceutical products, it is important to know the maximum amount of GC that can be incorporated and if increasing quantities of GCs alter EPS biophysical properties. Formulations containing EPS and beclomethasone, budesonide or fluticasone were analyzed (PL 10mg/ml; GC 1-2mg/ml). The microstructure was evaluated by electron paramagnetic resonance spectroscopy, GCs incorporated were determined by UV absorption and polarized light microscopy and surfactant activity with pulsating bubble surfactometer. We found that GCs have a ceiling of incorporation of around 10wt%, and that the GC not incorporated remains as crystals in the aqueous phase without altering the biophysical properties of the surfactant. This fact is important, because the greater the proportion of GC that EPS can carry, the better the efficiency of this pulmonary GC system.

The role of multilayers in preventing the premature buckling of the pulmonary surfactant

The pulmonary surfactant is a protein-lipid mixture that spreads into a film at the air-lung interface. The highly-compacted molecules of the film keep the interface from shrinking under the influence of otherwise high surface tension and thus prevent atelectasis. We have previously shown that for the film to withstand a high film pressure without collapsing it needs to assume a specific architecture of a molecular monolayer with islands of stacks of molecular multilayers scattered over the area. Surface activity was assessed in a captive bubble surfactometer (CBS) and the role of cholesterol and oxidation on surfactant function examined. The surfactant film was conceptualized as a plate under pressure. Finite element analysis was used to evaluate the role of the multilayer stacks in preventing buckling of the plate during compression. The model of film topography was constructed from atomic force microscope (AFM) scans of surfactant films and known physical properties of dipalmitoylphosphatidylcholine (DPPC), a major constituent of surfactant, using ANSYS structural-analysis software. We report that multilayer structures increase film stability. In simulation studies, the critical load required to induce surfactant film buckling increased about two-fold in the presence of multilayers. Our in vitro surfactant studies showed that surface topography varied between functional and dysfunctional films. However, the critical factor for film stability was the anchoring of the multilayers. Furthermore, the anchoring of multilayers and mechanical stability of the film was dependent on the presence of hydrophobic surfactant protein-C. The current study expands our understanding of the mechanism of surfactant inactivation in disease.

Restoring pulmonary surfactant membranes and films at the respiratory surface

Pulmonary surfactant is a complex of lipids and proteins assembled and secreted by the alveolar epithelium into the thin layer of fluid coating the respiratory surface of lungs. There, surfactant forms interfacial films at the air-water interface, reducing dramatically surface tension and thus stabilizing the air-exposed interface to prevent alveolar collapse along respiratory mechanics. The absence or deficiency of surfactant produces severe lung pathologies. This review describes some of the most important surfactant-related pathologies, which are a cause of high morbidity and mortality in neonates and adults. The review also updates current therapeutic approaches pursuing restoration of surfactant operative films in diseased lungs, mainly through supplementation with exogenous clinical surfactant preparations. This article is part of a Special Issue entitled: Membrane Lipid Therapy: Drugs Targeting Biomembranes edited by Pablo V. Escribá.

Anchoring dipalmitoyl phosphoethanolamine to nanoparticles boosts cellular uptake and fluorine-19 magnetic resonance signal

Magnetic resonance (MR) methods to detect and quantify fluorine (¹⁹F) nuclei provide the opportunity to study the fate of cellular transplants in vivo. Cells are typically labeled with ¹⁹F nanoparticles, introduced into living organisms and tracked by ¹⁹F MR methods. Background-free imaging and quantification of cell numbers are amongst the strengths of ¹⁹F MR-based cell tracking but challenges pertaining to signal sensitivity and cell detection exist. In this study we aimed to overcome these limitations by manipulating the aminophospholipid composition of ¹⁹F nanoparticles in order to promote their uptake by dendritic cells (DCs). As critical components of biological membranes, phosphatidylethanolamines (PE) were studied. Both microscopy and MR spectroscopy methods revealed a striking (at least one order of magnitude) increase in cytoplasmic uptake of ¹⁹F nanoparticles in DCs following enrichment with 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE). The impact of enriching ¹⁹F nanoparticles with PE on DC migration was also investigated. By manipulating the nanoparticle composition and as a result the cellular uptake we provide here one way of boosting ¹⁹F signal per cell in order to overcome some of the limitations related to ¹⁹F MR signal sensitivity. The boost in signal is ultimately necessary to detect and track cells in vivo.

Impact of the degree of ethoxylation of the ethoxylated polysorbate nonionic surfactant on the surface self-assembly of hydrophobin-ethoxylated polysorbate surfactant mixtures

Neutron reflectivity measurements have been used to study the surface adsorption of the polyethylene sorbitan monostearate surfactant, with degrees of ethoxylation varying from 3 to 20 ethylene oxide groups, with the globular protein hydrophobin. The surface interaction between the ethoxylated polysorbate nonionic surfactants and the hydrophobin results in self-assembly at the air-solution interface in the form of a well-defined layered surface structure. The surface interaction arises from a combination of the hydrophobic interaction between the surfactant alkyl chain and the hydrophobic patch on the surface of the hydrophobin, and the hydrophilic interaction between the ethoxylated sorbitan headgroup and the hydrophilic regions on the surface of the hydrophobin. The results presented show that varying the degree of ethoxylation of the polysorbate surfactant changes the interaction between the surfactant and the hydrophobin and the packing, and hence the evolution in the resulting surface structure. The optimal degree of ethoxylation for multilayer formation is over a broad range, from of order 6 to 17 ethylene oxide groups, and for degrees of ethoxylation of 3 and 20 only monolayer adsorption of either the surfactant or the hydrophobin is observed.

Adaptations to hibernation in lung surfactant composition of 13-lined ground squirrels influence surfactant lipid phase segregation properties

Pulmonary surfactant lines the entire alveolar surface, serving primarily to reduce the surface tension at the air-liquid interface. Surfactant films adsorb as a monolayer interspersed with multilayers with surfactant lipids segregating into different phases or domains. Temperature variation, which influences lipid physical properties, affects both the lipid phase segregation and the surface activity of surfactants. In hibernating animals, such as 13-lined ground squirrels, which vary their body temperature, surfactant must be functional over a wide range of temperatures. We hypothesised that surfactant from the 13-lined ground squirrel, Ictidomys tridecemlineatus, would undergo appropriate lipid structural re-arrangements at air-water interfaces to generate phase separation, sufficient to attain the low surface tensions required to remain stable at both low and high body temperatures. Here, we examined pressure-area isotherms at 10, 25 and 37°C and found that surfactant films from both hibernating and summer-active squirrels reached their highest surface pressure on the Wilhelmy-Langmuir balance at 10°C. Epifluorescence microscopy demonstrated that films of hibernating squirrel surfactant display different lipid micro-domain organisation characteristics than surfactant from summer-active squirrels. These differences were also reflected at the nanoscale as determined by atomic force microscopy. Such re-arrangement of lipid domains in the relatively more fluid surfactant films of hibernating squirrels may contribute to overcoming collapse pressures and support low surface tension during the normal breathing cycle at low body temperatures.

Role of lipid ordered/disordered phase coexistence in pulmonary surfactant function

The respiratory epithelium has evolved to produce a complicated network of extracellular membranes that are essential for breathing and, ultimately, survival. Surfactant membranes form a stable monolayer at the air-liquid interface with bilayer structures attached to it. By reducing the surface tension at the air-liquid interface, surfactant stabilizes the lung against collapse and facilitates inflation. The special composition of surfactant membranes results in the coexistence of two distinct micrometer-sized ordered/disordered phases maintained up to physiological temperatures. Phase coexistence might facilitate monolayer folding to form three-dimensional structures during exhalation and hence allow the film to attain minimal surface tension. These folded structures may act as a membrane reserve and attenuate the increase in membrane tension during inspiration. The present review summarizes what is known of ordered/disordered lipid phase coexistence in lung surfactant, paying attention to the possible role played by domain boundaries in the monolayer-to-multilayer transition, and the correlations of biophysical inactivation of pulmonary surfactant with alterations in phase coexistence.

High-resolution investigation of nanoparticle interaction with a model pulmonary surfactant monolayer

The pulmonary surfactant film spanning the inner alveolar surface prevents alveolar collapse during the end-exhalation and reduces the work of breathing. Nanoparticles (NPs) present in the atmosphere or nanocarriers targeted through the pulmonary route for medical purposes challenge this biological barrier. During interaction with or passage of NPs through the alveolar surfactant, the biophysical functioning of the film may be altered. However, experimental evidence showing detailed biophysical interaction of NPs with the pulmonary surfactant film are scant. In this study, we have investigated the impact of a hydrophobic polyorganosiloxane (AmOrSil20) NPs on the integrity as well as on the structural organization of the model pulmonary surfactant film. Primarily, scanning force microscopic techniques and electron microscopy have been used to visualize the topology as well as to characterize the localization of nanoparticles within the compressed pulmonary surfactant film. We could show that the NPs partition in the fluid phase of the compressed film at lower surface pressure, and at higher surface pressure, such NPs interact extensively with the surface-associated structures. Major amounts of NPs are retained at the interface and are released slowly into the aqueous subphase during repeated compression/expansion cycles. Further, the process of vesicle insertion into the interfacial film was observed to slow down with increasing NP concentrations. The hydrophobic AmOrSil20 NPs up to a given concentration do not substantially affect the structural organization and functioning of pulmonary surfactant film; however, such NPs do show drastic impacts at higher concentrations.

Compatible solutes: ectoine and hydroxyectoine improve functional nanostructures in artificial lung surfactants

Ectoine and hydroxyectoine belong to the family of compatible solutes and are among the most abundant osmolytes in nature. These compatible solutes protect biomolecules from extreme conditions and maintain their native function. In the present study, we have investigated the effect of ectoine and hydroxyectoine on the domain structures of artificial lung surfactant films consisting of dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) and the lung surfactant specific surfactant protein C (SP-C) in a molar ratio of 80:20:0.4. The pressure-area isotherms are found to be almost unchanged by both compatible solutes. The topology of the fluid domains shown by scanning force microscopy, which is thought to be responsible for the biophysical behavior under compression, however, is modified giving rise to the assumption that ectoine and hydroxyectoine are favorable for a proper lung surfactant function. This is further evidenced by the analysis of the insertion kinetics of lipid vesicles into the lipid-peptide monolayer, which is clearly enhanced in the presence of both compatible solutes. Thus, we could show that ectoine and hydroxyectoine enhance the function of lung surfactant in a simple model system, which might provide an additional rationale to inhalative therapy.

Lung surfactant protein SP-B promotes formation of bilayer reservoirs from monolayer and lipid transfer between the interface and subphase

We investigated the possible role of SP-B proteins in the function of lung surfactant. To this end, lipid monolayers at the air/water interface, bilayers in water, and transformations between them in the presence of SP-B were simulated. The proteins attached bilayers to monolayers, providing close proximity of the reservoirs with the interface. In the attached aggregates, SP-B mediated establishment of the lipid-lined connection similar to the hemifusion stalk. Via this connection, a lipid flow was initiated between the monolayer at the interface and the bilayer in water in a surface-tension-dependent manner. On interface expansion, the flow of lipids to the monolayer restored the surface tension to the equilibrium spreading value. SP-B induced formation of bilayer folds from the monolayer at positive surface tensions below the equilibrium. In the absence of proteins, lipid monolayers were stable at these conditions. Fold nucleation was initiated by SP-B from the liquid-expanded monolayer phase by local bending, and the proteins lined the curved perimeter of the growing fold. No effect on the liquid-condensed phase was observed. Covalently linked dimers resulted in faster kinetics for monolayer folding. The simulation results are in line with existing hypotheses on SP-B activity in lung surfactant and explain its molecular mechanism.

Comparative study of clinical pulmonary surfactants using atomic force microscopy

Clinical pulmonary surfactant is routinely used to treat premature newborns with respiratory distress syndrome, and has shown great potential in alleviating a number of neonatal and adult respiratory diseases. Despite extensive study of chemical composition, surface activity, and clinical performance of various surfactant preparations, a direct comparison of surfactant films is still lacking. In this study, we use atomic force microscopy to characterize and compare four animal-derived clinical surfactants currently used throughout the world, i.e., Survanta, Curosurf, Infasurf and BLES. These modified-natural surfactants are further compared to dipalmitoyl phosphatidylcholine (DPPC), a synthetic model surfactant of DPPC:palmitoyl-oleoyl phosphatidylglycerol (POPG) (7:3), and endogenous bovine natural surfactant. Atomic force microscopy reveals significant differences in the lateral structure and molecular organization of these surfactant preparations. These differences are discussed in terms of DPPC and cholesterol contents. We conclude that all animal-derived clinical surfactants assume a similar structure of multilayers of fluid phospholipids closely attached to an interfacial monolayer enriched in DPPC, at physiologically relevant surface pressures. This study provides the first comprehensive survey of the lateral structure of clinical surfactants at various surface pressures. It may have clinical implications on future application and development of surfactant preparations.

Recent advances in alveolar biology: some new looks at the alveolar interface

This article examines the manner in which some new methodologies and novel concepts have contributed to our understanding of how pulmonary surfactant reduces alveolar surface tension. Investigations utilizing small angle X-ray diffraction, inverted interface fluorescence microscopy, time of flight-secondary ion mass spectroscopy, atomic force microscopy, two-photon fluorescence microscopy and electrospray mass spectroscopy are highlighted and a new model of ventilation-induced acute lung injury described. This contribution attempts to emphasize how these new approaches have resulted in a fuller appreciation of events presumably occurring at the alveolar interface.

Pulmonary surfactant protein SP-C counteracts the deleterious effects of cholesterol on the activity of surfactant films under physiologically relevant compression-expansion dynamics

The presence of cholesterol is critical in defining a dynamic lateral structure in pulmonary surfactant membranes. However, an excess of cholesterol has been associated with impaired surface activity of surfactant. It has also been reported that surfactant protein SP-C interacts with cholesterol in lipid/protein interfacial films. In this study, we analyzed the effect of SP-C on the thermodynamic properties of phospholipid membranes containing cholesterol, and the ability of lipid/protein complexes containing cholesterol to form and respread interfacial films capable of producing very low surface tensions upon repetitive compression-expansion cycling. SP-C modulates the effect of cholesterol to reduce the enthalpy associated with the gel-to-liquid-crystalline melting transition in dipalmitoylphosphatidylcholine (DPPC) bilayers, as analyzed by differential scanning calorimetry. The presence of SP-C affects more subtly the effects of cholesterol on the thermotropic properties of ternary membranes, mimicking more closely the lipid composition of native surfactant, where SP-C facilitates the miscibility of the sterol. Incorporation of 1% or 2% SP-C (protein/phospholipid by weight) promotes almost instantaneous adsorption of suspensions of DPPC/palmitoyloleoylphospatidylcholine (POPC)/palmitoyloleoyl-phosphatidylglycerol (POPG) (50:25:15, w/w/w) into the air-liquid interface of a captive bubble, in both the absence and presence of cholesterol. However, cholesterol impairs the ability of SP-C-containing films to achieve very low surface tensions in bubbles subjected to compression-expansion cycling. Cholesterol also substantially impairs the ability of DPPC/POPC/POPG films containing 1% surfactant protein SP-B to mimic the interfacial behavior of native surfactant films, which are characterized by very low minimum surface tensions with only limited area change during compression and practically no compression-expansion hysteresis. However, the simultaneous presence of 2% SP-C practically restores the compression-expansion dynamics of cholesterol- and SP-B-containing films to the efficient behavior shown in the absence of cholesterol. This suggests that cooperation between the two proteins is required for lipid-protein films containing cholesterol to achieve optimal performance under physiologically relevant compression-expansion dynamics.

Nanoparticle interaction with model lung surfactant monolayers

One of the most important functions of the lung surfactant monolayer is to form the first line of defence against inhaled aerosols such as nanoparticles (NPs), which remains largely unexplored. We report here, for the first time, the interaction of polyorganosiloxane NPs (AmorSil20: 22 nm in diameter) with lipid monolayers characteristic of alveolar surfactant. To enable a better understanding, the current knowledge about an established model surface film that mimics the surface properties of the lung is reviewed and major results originating from our group are summarized. The pure lipid components dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylglycerol have been used to study the biophysical behaviour of their monolayer films spread at the air-water interface in the presence of NPs. Film balance measurements combined with video-enhanced fluorescence microscopy have been used to investigate the formation of domain structures and the changes in the surface pattern induced by NPs. We are able to show that NPs are incorporated into lipid monolayers with a clear preference for defect structures at the fluid-crystalline interface leading to a considerable monolayer expansion and fluidization. NPs remain at the air-water interface probably by coating themselves with lipids in a self-assembly process, thereby exhibiting hydrophobic surface properties. We also show that the domain structure in lipid layers containing surfactant protein C, which is potentially responsible for the proper functioning of surfactant material, is considerably affected by NPs.

Chemistry at air/water interface versus reaction in a flask: tuning molecular conformation in thin films

Atomic force microscopy and X-ray reflectivity studies of cobalt stearate Langmuir-Blodgett (LB) films (CoStp) deposited from a preformed bulk sample on quartz substrates showed formation of a Volmer-Weber type monolayer but no multilayers as compared to the excellent multilayers of cobalt stearate films (CoStn) deposited at the air/water interface by the usual LB technique, in spite of both showing bidentate bridging type coordination of cobalt ions with the carboxylate group. The difference is attributed to existence of different headgroup conformers, observed from Fourier transform infrared (FTIR) studies. The CoStp films had a higher energy 'boat' conformation with linear O-Co-O linkage, whereas CoStn formed a low energy conformer with a bent O-Co-O configuration (bond angle of 105 degrees). Present results support the necessity of bidentate bridging coordination in multilayer deposition, but rejects its sufficiency by bringing out the crucial role played by air/water interface. Differences in surface pressure-molecular area isotherms and hydrocarbon tail-tail interactions (evident from FTIR spectra) of the films support the above statement. Methyl-methyl interactions observed in CoStn samples suggest hierarchy of supramolecular chemistry at the air/water interface in tuning the C-O-Co bond angle essential to satisfy the wetting condition with the substrate and subsequently form LB multilayers.

Effects of palmitoylation on dynamics and phospholipid-bilayer-perturbing properties of the N-terminal segment of pulmonary surfactant protein SP-C as shown by 2H-NMR

It has been proposed that palmitoylation of the N-terminal segment of surfactant protein SP-C is important for maintaining association of pulmonary surfactant complexes with interfacial films compressed to high pressures at the end of expiration. In this study, we examined surfactant membrane models containing palmitoylated and nonpalmitoylated synthetic peptides, based on the N-terminal SP-C sequence, in dipalmitoylphosphatidylcholine (DPPC)/egg phosphatidylglycerol (7:3, w/w) by (2)H-NMR. Perturbations of lipid properties by the peptide versions were compared in samples containing chain- and headgroup-deuterated lipid (DPPC-d(62) and DPPC-d(4) respectively). Also, deuterated peptide palmitate chains were compared with those of DPPC in otherwise identical lipid-protein mixtures. Palmitoylated peptide increased average DPPC-d(62) chain orientational order slightly, particularly for temperatures spanning gel and liquid crystalline coexistence, implying penetration of palmitoylated peptide into ordered membrane. In contrast, the nonpalmitoylated peptide had a small disordering effect in this temperature range. Both peptide versions perturbed DPPC-d(4) headgroup orientation similarly, suggesting little effect of palmitoylation on the largely electrostatic peptide-headgroup interaction. Deuterated acyl chains attached to the SP-C N-terminal segment displayed a qualitatively different distribution of chain order, and lower average order, than DPPC-d(62) in the same membranes. This likely reflects local perturbation of lipid headgroup spacing by the peptide portion interacting with the bilayer near the peptide palmitate chains. This study suggests that SP-C-attached acyl chains could be important for coupling of lipid and protein motions in surfactant bilayers and monolayers, especially in the context of ordered phospholipid structures such as those potentially formed during exhalation, when stabilization of the respiratory surface by surfactant is the most crucial.

Current perspectives in pulmonary surfactant--inhibition, enhancement and evaluation

Pulmonary surfactant (PS) is a complicated mixture of approximately 90% lipids and 10% proteins. It plays an important role in maintaining normal respiratory mechanics by reducing alveolar surface tension to near-zero values. Supplementing exogenous surfactant to newborns suffering from respiratory distress syndrome (RDS), a leading cause of perinatal mortality, has completely altered neonatal care in industrialized countries. Surfactant therapy has also been applied to the acute respiratory distress syndrome (ARDS) but with only limited success. Biophysical studies suggest that surfactant inhibition is partially responsible for this unsatisfactory performance. This paper reviews the biophysical properties of functional and dysfunctional PS. The biophysical properties of PS are further limited to surface activity, i.e., properties related to highly dynamic and very low surface tensions. Three main perspectives are reviewed. (1) How does PS permit both rapid adsorption and the ability to reach very low surface tensions? (2) How is PS inactivated by different inhibitory substances and how can this inhibition be counteracted? A recent research focus of using water-soluble polymers as additives to enhance the surface activity of clinical PS and to overcome inhibition is extensively discussed. (3) Which in vivo, in situ, and in vitro methods are available for evaluating the surface activity of PS and what are their relative merits? A better understanding of the biophysical properties of functional and dysfunctional PS is important for the further development of surfactant therapy, especially for its potential application in ARDS.

Influence of lipid saturation grade and headgroup charge: a refined lung surfactant adsorption model

Rapid adsorption of surfactant material to the air/liquid interface of the lung is essential for maintaining normal lung function. The detailed mechanism of this process, however, remains unclear. In this study, we elucidate the influence of lipid saturation grade and headgroup charge of surface layer lipids on surfactant protein (SP)-induced vesicle insertion into monolayers spread at the air/water interface of a film balance. We used dipalmitoylphosphatidlycholine (DPPC),1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) as monolayer lipids doped with either hydrophobic surfactant-specific protein SP-B or SP-C (0.2 and 0.4 mol %, respectively). Vesicles consisting of DPPC/DPPG (4:1, mol ratio) were injected into a stirred subphase to quantify adsorption kinetics. Based on kinetic film balance and fluorescence measurements, a refined model describing distinct steps of vesicle adsorption to surfactant monolayers is presented. First, in a protein-independent step, lipids from vesicles bridged to the interfacial film by Ca(2+) ions are inserted into defects of a disordered monolayer at low surface pressures. Second, in a SP-facilitated step, active material insertion involving an SP-B- or SP-C-induced flip-flop of lipids occurs at higher surface pressures. Negatively charged lipids obviously influence the threshold pressures at which this second protein-mediated adsorption mechanism takes place.

Structural characterization of the monolayer-multilayer transition in a pulmonary surfactant model: IR studies of films transferred at continuously varying surface pressures

The four-component system acyl chain perdeuterated 1,2-dipalmitoylphosphatidylcholine (DPPC)/1,2-dipalmitoylphosphatidylglycerol/ (DPPG)/pulmonary surfactant protein SP-C/cholesterol provides a useful model for in vitro biophysical studies of the reversible monolayer to multilayer transition that occurs during compression <--> expansion cycles in the lung. Monolayer films of this mixture (with chain perdeuterated DPPC-d62) at the air/water interface have been transferred to solid substrates under conditions of continuously varying surface pressure, an approach termed COVASP (continuously varying surface pressures) (Langmuir 2007, 23, 4958). The thermodynamic properties of the Langmuir films have been examined with pressure-area isotherms, while the molecular properties of the film constituents in the transferred films in the monolayer and multilayer phases have been examined with IR spectroscopy. Quantitative intensity measurements of the DPPC-d62, DPPG, and SP-C components in each phase reveal that the DPPG and SP-C constituents are relatively enriched in the multilayer compared with the DPPC-d62, although all three species are present in both phases. Some molecular structure information is available from the surface-pressure-induced variation in IR parameters. The DPPC-d62 exhibits slightly increased conformational order in the multilayer phase as detected from decreases in the CD2 stretching frequencies upon compression, while the lipid phosphate residues become dehydrated, as deduced from increases in the 1245 cm-1 symmetric PO2- stretching frequency. A small increase is observed in the protein amide I frequency; possible interpretations of these changes are presented. The current observations are compared with ideas contained in the "squeeze-out hypothesis" (Handbook of Physiology, The Respiratory System; American Physiological Society Press: Bethesda, MD, 1986; Vol. III, p 247) and in the "liquid crystalline collapse" model (Biophys. J. 2003, 84, 3792). Within the limitation of the current procedures, the data contain elements from both these descriptions of the monolayer transformation. Extensions and possible limitations of the COVASP-IR method are discussed.

The molecular mechanism of monolayer-bilayer transformations of lung surfactant from molecular dynamics simulations

The aqueous lining of the lung surface exposed to the air is covered by lung surfactant, a film consisting of lipid and protein components. The main function of lung surfactant is to reduce the surface tension of the air-water interface to the low values necessary for breathing. This function requires the exchange of material between the lipid monolayer at the interface and lipid reservoirs under dynamic compression and expansion of the interface during the breathing cycle. We simulated the reversible exchange of material between the monolayer and lipid reservoirs under compression and expansion of the interface. We used a mixture of dipalmitoyl-phosphatidylcholine, palmitoyl-oleoyl-phosphatidylglycerol, cholesterol, and surfactant-associated protein C as a functional analog of mammalian lung surfactant. In our simulations, the monolayer collapses into the water subphase on compression and forms bilayer folds. On monolayer reexpansion, the material is transferred from the folds back to the interface. The simulations indicate that the connectivity of the bilayer aggregates to the monolayer is necessary for the reversibility of the monolayer-bilayer transformation. The simulations also show that bilayer aggregates are unstable in the air subphase and stable in the water subphase.

An elevated level of cholesterol impairs self-assembly of pulmonary surfactant into a functional film

In adult respiratory distress syndrome, the primary function of pulmonary surfactant to strongly reduce the surface tension of the air-alveolar interface is impaired, resulting in diminished lung compliance, a decreased lung volume, and severe hypoxemia. Dysfunction coincides with an increased level of cholesterol in surfactant which on its own or together with other factors causes surfactant failure. In the current study, we investigated by atomic force microscopy and Kelvin-probe force microscopy how the increased level of cholesterol disrupts the assembly of an efficient film. Functional surfactant films underwent a monolayer-bilayer conversion upon contraction and resulted in a film with lipid bilayer stacks, scattered over a lipid monolayer. Large stacks were at positive electrical potential, small stacks at negative potential with respect to the surrounding monolayer areas. Dysfunctional films formed only few stacks. The surface potential of the occasional stacks was also not different from the surrounding monolayer. Based on film topology and potential distribution, we propose a mechanism for formation of stacked bilayer patches whereby the helical surfactant-associated protein SP-C becomes inserted into the bilayers with defined polarity. We discuss the functional role of the stacks as mechanically reinforcing elements and how an elevated level of cholesterol inhibits the formation of the stacks. This offers a simple biophysical explanation for surfactant inhibition in adult respiratory distress syndrome and possible targets for treatment.

Lipid composition greatly affects the in vitro surface activity of lung surfactant protein mimics

A crucial aspect of developing a functional, biomimetic lung surfactant (LS) replacement is the selection of the synthetic lipid mixture and surfactant proteins (SPs) or suitable mimics thereof. Studies elucidating the roles of different lipids and surfactant proteins in natural LS have provided critical information necessary for the development of synthetic LS replacements that offer performance comparable to the natural material. In this study, the in vitro surface-active behaviors of peptide- and peptoid-based mimics of the lung surfactant proteins, SP-B and SP-C, were investigated using three different lipid formulations. The lipid mixtures were chosen from among those commonly used for the testing and characterization of SP mimics--(1) dipalmitoyl phosphatidylcholine:palmitoyloleoyl phosphatidylglycerol 7:3 (w/w) (PCPG), (2) dipalmitoyl phosphatidylcholine:palmitoyloleoyl phosphatidylglycerol:palmitic acid 68:22:9 (w/w) (TL), and (3) dipalmitoyl phosphatidylcholine:palmitoyloleoyl phosphatidylcholine:palmitoyloleoyl phosphatidylglycerol:palmitoyloleoyl phosphatidylethanolamine:palmitoyloleoyl phosphatidylserine:cholesterol 16:10:3:1:3:2 (w/w) (IL). The lipid mixtures and lipid/peptide or lipid/peptoid formulations were characterized in vitro using a Langmuir-Wilhelmy surface balance, fluorescent microscopic imaging of surface film morphology, and a pulsating bubble surfactometer. Results show that the three lipid formulations exhibit significantly different surface-active behaviors, both in the presence and absence of SP mimics, with desirable in vitro biomimetic behaviors being greatest for the TL formulation. Specifically, the TL formulation is able to reach low-surface tensions at physiological temperature as determined by dynamic PBS and LWSB studies, and dynamic PBS studies show this to occur with a minimal amount of compression, similar to natural LS.

Electrical surface potential of pulmonary surfactant

Pulmonary surfactant is a mixed lipid protein substance of defined composition that self-assembles at the air-lung interface into a molecular film and thus reduces the interfacial tension to close to zero. A very low surface tension is required for maintaining the alveolar structure. The pulmonary surfactant film is also the first barrier for airborne particles entering the lung upon breathing. We explored by frequency modulation Kelvin probe force microscopy (FM-KPFM) the structure and local electrical surface potential of bovine lipid extract surfactant (BLES) films. BLES is a clinically used surfactant replacement and here served as a realistic model surfactant system. The films were distinguished by a pattern of molecular monolayer areas, separated by patches of lipid bilayer stacks. The stacks were at positive electrical potential with respect to the surrounding monolayer areas. We propose a particular molecular arrangement of the lipids and proteins in the film to explain the topographic and surface potential maps. We also discuss how this locally variable surface potential may influence the retention of charged or polar airborne particles in the lung.

Surfactant protein C and lung function: new insights into the role of α-helical length and palmitoylation

Surfactant protein C (SP-C) is known to be essential for lung function and the formation of a surface confined reservoir at the alveolar interface. The structural features relevant for the peptide's extraordinary ability to form extended three-dimensional structures were systematically investigated and are summarized in the present paper. The influence of palmitoylation was studied for full length SP-Cs as well as truncated variants with the N-terminal residues 1-17 and 1-13, respectively. The combined results from film balance measurements, fluorescence microscopy (FLM) and scanning force microscopy (SFM) reveal a fine-tuned balance between the influence of the palmitoyl chains and alpha-helical length. Native SP-C added to DPPC/DPPG monolayers (molar ratio 80:20) induced the formation of the surface confined reservoir independent of its palmitoylation degree. However, topographic images revealed that only bilayers and not multilayers where formed when the acyl chains were missing. The influence of palmitoylation increased when alpha-helical length was considerably reduced to 17 or even 13 amino acid residues. In these strongly truncated SP-C peptides palmitoyl chains increased monolayer stability and anchored the peptides in the lipid film. However, no multilayer formation was observed at all for all shortened peptides. The alpha-helix of SP-C seems to be a prerequisite for the formation of extended three-dimensional structures and obviously has to be able to span a lipid bilayer. Palmitoylation obviously mediates interactions between lipids and/or peptides not only within a protein/lipid film but also between neighbouring layers and induces a stacking of bilayers.

Effect of humidity on the stability of lung surfactant films adsorbed at air–water interfaces

The effect of humidity on the film stability of Bovine Lipid Extract Surfactant (BLES) is studied using the captive bubble method. It is found that adsorbed BLES films show distinctly different stability patterns at two extreme relative humidities (RHs), i.e., bubbles formed by ambient air and by air prehumidified to 100% RH at 37 degrees C. The differences are illustrated by the ability to maintain low surface tensions at various compression ratios, the behavior of bubble clicks, and film compressibility. These results suggest that 100% RH at 37 degrees C tends to destabilize the BLES films. In turn, the experimental results indicate that the rapidly adsorbed BLES film on a captive bubble presents a barrier to water transport that retards full humidification of the bubble when ambient air is used for bubble formation. These findings necessitate careful evaluation and maintenance of environmental humidity for all in vitro assessment of lung surfactants. It is also found that the stability of adsorbed bovine natural lung surfactant (NLS) films is not as sensitive as BLES films to high humidity. This may indicate a physiological function of SP-A and/or cholesterol, which are absent in BLES, in maintaining the extraordinary film stability in vivo.

Protein-lipid interactions and surface activity in the pulmonary surfactant system

Pulmonary surfactant is a lipid-protein complex, synthesized and secreted by the respiratory epithelium of lungs to the alveolar spaces, whose main function is to reduce the surface tension at the air-liquid interface to minimize the work of breathing. The activity of surfactant at the alveoli involves three main processes: (i) transfer of surface active molecules from the aqueous hypophase into the interface, (ii) surface tension reduction to values close to 0 mN/m during compression at expiration and (iii) re-extension of the surface active film upon expansion at inspiration. Phospholipids are the main surface active components of pulmonary surfactant, but the dynamic behaviour of phospholipids along the breathing cycle requires the necessary participation of some specific surfactant associated proteins. The present review summarizes the current knowledge on the structure, disposition and lipid-protein interactions of the hydrophobic surfactant proteins SP-B and SP-C, the two main actors participating in the surface properties of pulmonary surfactant. Some of the methodologies currently used to evaluate the surface activity of the proteins in lipid-protein surfactant preparations are also revised. Working models for the potential molecular mechanism of SP-B and SP-C are finally discussed. SP-B might act in surfactant as a sort of amphipathic tag, directing the lipid-protein complexes to insert and re-insert very efficiently into the air-liquid interface along successive breathing cycles. SP-C could be essential to maintain association of lipid-protein complexes with the interface at the highest compressed states, at the end of exhalation. The understanding of the mechanisms of action of these proteins is critical to approach the design and development of new clinical surfactant preparations for therapeutical applications.