Cell microarrays

Living Cell Microarrays: An Overview of Concepts

Living cell microarrays are a highly efficient cellular screening system. Due to the low number of cells required per spot, cell microarrays enable the use of primary and stem cells and provide resolution close to the single-cell level. Apart from a variety of conventional static designs, microfluidic microarray systems have also been established. An alternative format is a microarray consisting of three-dimensional cell constructs ranging from cell spheroids to cells encapsulated in hydrogel. These systems provide an in vivo-like microenvironment and are preferably used for the investigation of cellular physiology, cytotoxicity, and drug screening. Thus, many different high-tech microarray platforms are currently available. Disadvantages of many systems include their high cost, the requirement of specialized equipment for their manufacture, and the poor comparability of results between different platforms. In this article, we provide an overview of static, microfluidic, and 3D cell microarrays. In addition, we describe a simple method for the printing of living cell microarrays on modified microscope glass slides using standard DNA microarray equipment available in most laboratories. Applications in research and diagnostics are discussed, e.g., the selective and sensitive detection of biomarkers. Finally, we highlight current limitations and the future prospects of living cell microarrays.

Cell Microarrays for Biomedical Applications

In this chapter the state of the art of live cell microarrays for high-throughput biological assays are reviewed. The fabrication of novel microarrays with respect to material science and cell patterning methods is included. A main focus of the chapter is on various aspects of the application of cell microarrays by providing selected examples in research fields such as biomaterials, stem cell biology and neuroscience. Additionally, the importance of microfluidic technologies for high-throughput on-chip live-cell microarrays is highlighted for single-cell and multi-cell assays as well as for 3D tissue constructs.

Quantitative dose-response curves from subcellular lipid multilayer microarrays

The dose-dependent bioactivity of small molecules on cells is a crucial factor in drug discovery and personalized medicine. Although small-molecule microarrays are a promising platform for miniaturized screening, it has been a challenge to use them to obtain quantitative dose-response curves in vitro, especially for lipophilic compounds. Here we establish a small-molecule microarray assay capable of controlling the dosage of small lipophilic molecules delivered to cells by varying the sub-cellular volumes of surface supported lipid micro- and nanostructure arrays fabricated with nanointaglio. Features with sub-cellular lateral dimensions were found necessary to obtain normal cell adhesion with HeLa cells. The volumes of the lipophilic drug-containing nanostructures were determined using a fluorescence microscope calibrated by atomic-force microscopy. We used the surface supported lipid volume information to obtain EC-50 values for the response of HeLa cells to three FDA-approved lipophilic anticancer drugs, docetaxel, imiquimod and triethylenemelamine, which were found to be significantly different from neat lipid controls. No significant toxicity was observed on the control cells surrounding the drug/lipid patterns, indicating lack of interference or leakage from the arrays. Comparison of the microarray data to dose-response curves for the same drugs delivered liposomally from solution revealed quantitative differences in the efficacy values, which we explain in terms of cell-adhesion playing a more important role in the surface-based assay. The assay should be scalable to a density of at least 10,000 dose response curves on the area of a standard microtiter plate.

Cell-Based Microarrays for In Vitro Toxicology

DNA/RNA and protein microarrays have proven their outstanding bioanalytical performance throughout the past decades, given the unprecedented level of parallelization by which molecular recognition assays can be performed and analyzed. Cell microarrays (CMAs) make use of similar construction principles. They are applied to profile a given cell population with respect to the expression of specific molecular markers and also to measure functional cell responses to drugs and chemicals. This review focuses on the use of cell-based microarrays for assessing the cytotoxicity of drugs, toxins, or chemicals in general. It also summarizes CMA construction principles with respect to the cell types that are used for such microarrays, the readout parameters to assess toxicity, and the various formats that have been established and applied. The review ends with a critical comparison of CMAs and well-established microtiter plate (MTP) approaches.

A triggered DNA hydrogel cover to envelop and release single cells

We develop an enzyme-triggered permeable DNA hydrogel cover to envelop and release single cells in microwells. The porous structure of the DNA hydrogel allows nutrients and waste to pass through, leading to a cell viability as high as 98%. The design provides a general method to culture, monitor, and manipulate single cells, and has potential applications in cell patterning and studying cell communication.

MEMS microwell and microcolumn arrays: novel methods for high-throughput cell-based assays

Although the cell-based assay is becoming more popular for high throughput drug screening and the functional characterization of disease-associated genes, most researchers in these areas do not use it because it is a complex and expensive process. We wanted to create a simple method of performing an on-chip cell-based assay. To do this, we used micro-electro-mechanical systems (MEMS) to fabricate a microwell array chip comprised of a glass substrate covered with a photoresist film patterned to form multiple microwells and tested it in two reverse transfection experiments, an exogenous gene expression study and an endogenous gene knockdown study. It was used effectively in both. Then, using the same MEMS technology, we fabricated a complementary microcolumn array to be used as a drug carrier device to topically apply drugs to cells cultured in the microwell array. We tested the effectiveness of microwell-microcolumn on-chip cell-based assay by using it in experiments to identify epidermal growth factor receptor (EGFR) activity inhibitors, for which it was found to provide effective high throughput and high content functional screening. In conclusion, this new method of cell-based screening proved to be a simple and efficient method of characterizing gene function and discovering drug leads.

Microengineering methods for cell-based microarrays and high-throughput drug-screening applications

Screening for effective therapeutic agents from millions of drug candidates is costly, time consuming, and often faces concerns due to the extensive use of animals. To improve cost effectiveness, and to minimize animal testing in pharmaceutical research, in vitro monolayer cell microarrays with multiwell plate assays have been developed. Integration of cell microarrays with microfluidic systems has facilitated automated and controlled component loading, significantly reducing the consumption of the candidate compounds and the target cells. Even though these methods significantly increased the throughput compared to conventional in vitro testing systems and in vivo animal models, the cost associated with these platforms remains prohibitively high. Besides, there is a need for three-dimensional (3D) cell-based drug-screening models which can mimic the in vivo microenvironment and the functionality of the native tissues. Here, we present the state-of-the-art microengineering approaches that can be used to develop 3D cell-based drug-screening assays. We highlight the 3D in vitro cell culture systems with live cell-based arrays, microfluidic cell culture systems, and their application to high-throughput drug screening. We conclude that among the emerging microengineering approaches, bioprinting holds great potential to provide repeatable 3D cell-based constructs with high temporal, spatial control and versatility.

Microarray bioinformatics

Bioinformatics has become an increasingly important tool for molecular biologists, especially for the analysis of microarray data. Microarrays can produce vast amounts of information requiring a series of consecutive analyses to render the data interpretable. The direct output of microarrays cannot be directly interpreted to show differences in settings, conditions of samples, or time points. To make microarray experiments interpretable, it is necessary that a series of algorithms and approaches be applied. After normalization of generated data, which is necessary to make a comparison feasible, significance analysis, clustering of samples and biological compounds of interest and visualization are generally performed. This chapter will focus on providing a basic understanding of the generally approaches and algorithms currently employed in microarray bioinformatics.

Laser-based patterning for transfected cell microarrays

The spatial control over biomolecule- and cell-surface interactions is of great interest to a broad range of biomedical applications, including sensors, implantable devices and cell microarrays. Microarrays in particular require precise spatial control and the formation of patterns with microscale features. Here, we have developed an approach specifically designed for transfected cell microarray (TCM) applications that allows microscale spatial control over the location of both DNA and cells on highly doped p-type silicon substrates. This was achieved by surface modification, involving plasma polymerization of allylamine, grafting of poly(ethylene glycol) and subsequent excimer laser ablation. DNA could be delivered in a spatially defined manner using ink-jet printing. In addition, electroporation was investigated as an approach to transfect attached cells with adsorbed DNA and good transfection efficiencies of approximately 20% were observed. The ability of the microstructured surfaces to spatially direct both DNA adsorption and cell attachment was demonstrated in a functional TCM, making this system an exciting platform for chip-based functional genomics.

Continuously perfused, non-cross-contaminating microfluidic chamber array for studying cellular responses to orthogonal combinations of matrix and soluble signals

We present a microfluidic cell culture array with unique versatility and parallelization for experimental trials requiring perfusion cultures. Specifically, we realize a rectangular chamber array in a PDMS device with three attributes: (i) continuous perfusion; (ii) flow paths that forbid cross-chamber contamination; and (iii) chamber shielding from direct perfusion to minimize shear-induced cell behaviour. These attributes are made possible by a bridge-and-underpass architecture, where flow streams travel vertically to pass over (or under) channels and on-chip valves. The array is also designed for considerable versatility, providing subarray, row, column, or single chamber addressing. It allows for incubation with adsorbed molecules, perfusion of differing media, seeding or extraction of cells, and assay staining. We use the device to characterize different phenotypes of alveolar epithelial type II (ATII) cells, particularly the extent of epithelial-to-mesenchymal transition (EMT), a highly suspected pathway in tissue regeneration and fibrosis. Cells are cultured on combinations of matrix proteins (fibronectin or laminin by row) and soluble signals (with or without transforming growth factor-beta1 by column) with two repeats per chip. Fluorescent assays are performed in the array to assess viability, cytoskeletal organization, and cell-cell junction formation. Assay and morphological data are used to tease-out effects of cues driving each phenotype, confirming this as an effective and versatile combinatorial screening platform.

Fibrin-mediated lentivirus gene transfer: implications for lentivirus microarrays

We employed fibrin hydrogel as a bioactive matrix for lentivirus mediated gene transfer. Fibrin-mediated gene transfer was highly efficient and exhibited strong dependence on fibrinogen concentration. Efficient gene transfer was achieved with fibrinogen concentration between 3.75 and 7.5mg/ml. Lower fibrinogen concentrations resulted in diffusion of virus out of the gel while higher concentrations led to ineffective fibrin degradation by target cells. Addition of fibrinolytic inhibitors decreased gene transfer in a dose-dependent manner suggesting that fibrin degradation by target cells may be necessary for successful gene delivery. Under these conditions transduction may be limited only to cells interacting with the matrix thereby providing a method for spatially-localized gene delivery. Indeed, when lentivirus-containing fibrin microgels were spotted in an array format gene transfer was confined to virus-containing fibrin spots with minimal cross-contamination between neighboring sites. Collectively, our data suggest that fibrin may provide an effective matrix for spatially-localized gene delivery with potential applications in high-throughput lentiviral microarrays and in regenerative medicine.

Nanoscale resolution, multicomponent biomolecular arrays generated by aligned printing with parylene peel-off

We present "Print-and-Peel", a high-throughput method to generate multicomponent biomolecular arrays with sub-100 nm nanoscale feature width. An inkjet printer is first aligned to a parylene template containing nanoscale openings. After printing, the parylene is peeled off to reveal uniformly patterned nanoscale features, despite the imperfect morphologies of the original inkjet spots. We further patterned combinatorial nanoarrays by performing a second print-run superimposed over the first, thereby extending the multiplexing capability of the technique.

Chemical modification of reactive multilayered films fabricated from poly(2-alkenyl azlactone)s: design of surfaces that prevent or promote mammalian cell adhesion and bacterial biofilm growth

We report an approach to the design of reactive polymer films that can be functionalized post-fabrication to either prevent or promote the attachment and growth of cells. Our approach is based on the reactive layer-by-layer assembly of covalently crosslinked thin films using a synthetic polyamine and a polymer containing reactive azlactone functionality. Our results demonstrate (i) that the residual azlactone functionality in these films can be exploited to immobilize amine-functionalized chemical motifs similar to those that promote or prevent cell and protein adhesion when assembled as self-assembled monolayers on gold-coated surfaces and (ii) that the immobilization of these motifs changes significantly the behaviors and interactions of cells with the surfaces of these polymer films. We demonstrate that films treated with the hydrophobic molecule decylamine support the attachment and growth of mammalian cells in vitro. In contrast, films treated with the hydrophilic carbohydrate d-glucamine prevent cell adhesion and growth almost completely. The results of additional experiments suggest that these large differences in cell behavior can be understood, at least in part, in terms of differences in the abilities of these two different chemical motifs to promote or prevent the adsorption of protein onto film-coated surfaces. We demonstrate further that this approach can be used to pattern regions of these reactive films that resist the initial attachment and subsequent invasion of mammalian cells for periods of at least one month in the presence of serum-containing cell culture media. Finally, we report that films that prevent the adhesion and growth of mammalian cells also prevent the initial formation of bacterial biofilms when incubated in the presence of the clinically relevant pathogen Pseudomonas aeruginosa . The results of these studies, collectively, suggest the basis of general approaches to the fabrication and functionalization of thin films that prevent, promote, or pattern cell growth or the formation of biofilms on surfaces of interest in the contexts of both fundamental biological studies and a broad range of other practical applications.

MAC-CCD system: a novel lymphocyte microwell-array chip system equipped with CCD scanner to generate human monoclonal antibodies against influenza virus

We previously developed a lymphocyte microwell-array system, which effectively detects antigen-specific B-cells by monitoring intracellular Ca(2+) mobilization at the single-cell level with a fluorescent Ca(2+) indicator, fluo-4. However, it is difficult for the system to perform time-lapse monitoring. Here, we developed a novel method, a lymphocyte microwell-array chip system equipped with a charge-coupled device (CCD) time-lapse scanner (MAC-CCD system), for monitoring intracellular Ca(2+) mobilization. The MAC-CCD system is able to monitor intracellular Ca(2+) mobilization of more than 15,000-20,000 individual live B-cells every 10 s. In addition, we adopted a correlation method in a MAC-CCD system, which enabled us to detect B-cells with a frequency of as few as 0.046%. Furthermore, we succeeded in obtaining six influenza nucleoprotein-specific human monoclonal antibodies from the peripheral blood of influenza-vaccinated volunteers. These results demonstrate that the MAC-CCD system with a correlation method could detect very rare antigen-specific B-cells.

Living-cell microarrays

Living cells are remarkably complex. To unravel this complexity, living-cell assays have been developed that allow delivery of experimental stimuli and measurement of the resulting cellular responses. High-throughput adaptations of these assays, known as living-cell microarrays, which are based on microtiter plates, high-density spotting, microfabrication, and microfluidics technologies, are being developed for two general applications: (a) to screen large-scale chemical and genomic libraries and (b) to systematically investigate the local cellular microenvironment. These emerging experimental platforms offer exciting opportunities to rapidly identify genetic determinants of disease, to discover modulators of cellular function, and to probe the complex and dynamic relationships between cells and their local environment.

Non-contact protein microarray fabrication using a procedure based on liquid bridge formation

Contemporary microarrayers of contact or non-contact format used in protein microarray fabrication still suffer from a number of problems, e.g. generation of satellite spots, inhomogeneous spots, misplaced or even absent spots, and sample carryover. In this paper, a new concept of non-contact sample deposition that reduces such problems is introduced. To show the potential and robustness of this pressure-assisted deposition technique, different sample solutions known to cause severe problems or to be even impossible to print with conventional microarrayers were accurately printed. The samples included 200 mg mL(-1) human serum albumin, highly concentrated sticky cell adhesion proteins, pure high-salt cell-lysis buffer, pure DMSO, and a suspension of 5-microm polystyrene beads. Additionally, a water-immiscible liquid fluorocarbon, which was shown not to affect the functionality of the capture molecules, was employed as a lid to reduce evaporation during microarray printing. The fluorocarbon liquid lid was shown to circumvent hydrolysis of water-sensitive activated surfaces during long-term deposition procedures.

Microfluidic lithography of SAMs on gold to create dynamic surfaces for directed cell migration and contiguous cell cocultures

A straightforward, flexible, and inexpensive method to create patterned self-assembled monolayers (SAMs) on gold using microfluidics-microfluidic lithography-has been developed. Using a microfluidic cassette, alkanethiols were rapidly patterned on gold surfaces to generate monolayers and mixed monolayers. The patterning methodology is flexible and, by controlling the solvent conditions and thiol concentration, permeation of alkanethiols into the surrounding PDMS microfluidic cassette can be advantageously used to create different patterned feature sizes and to generate well-defined SAM surface gradients with a single microfluidic chip. To demonstrate the utility of microfluidic lithography, multiple cell experiments were conducted. By patterning cell adhesive regions in an inert background, a combination of selective masking of the surface and centrifugation achieved spatial and temporal control of patterned cells, enabling the design of both dynamic surfaces for directed cell migration and contiguous cocultures. Cellular division and motility resulted in directed, dynamic migration, while the centrifugation-aided seeding of a second cell line produced contiguous cocultures with multiple sites for heterogeneous cell-cell interactions.

Transfected cell microarrays: an efficient tool for high-throughput functional analysis

Transfected cell microarrays are considered to be a breakthrough methodology for high-throughput and high-content functional genomics. Here, recent advances in the cell microarray field are reviewed, along with its potential to increase the speed of determining gene function. These advances, combined with an increasing number and diversity of gene perturbing systems, such as RNAi and ectopic gene expression, provide tools for expanding our understanding of biology at the systems level.

Cell microarrays in drug discovery

There is an increasing need for systematic cell-based assays in a high-throughput screening (HTS) format to analyze the phenotypic consequences of perturbing mammalian cells with drugs, genes, interfering RNA. Taking advantage of the recent progress in microtechnology, new cell microarrays are being developed and applied to a large range of issues in metazoan cells. This article compares different approaches and evaluates their potential use in the drug discovery process. Although still an emerging technology, cell microarrays hold great promise to optimize the efficiency:cost ratio in cell-based HTS.

Microarray platforms for enzymatic and cell-based assays

This tutorial review introduces the uninitiated to the world of microarrays (or so-called chips) and covers a number of basic concepts such as substrates and surfaces, printing and analysis. It then moves on to look at some newer applications of microarray technology, which include enzyme analysis (notably kinases and proteases) as well as the growing enchantment with so-called cell-based microarrays that offer a unique approach to high-throughput cellular analysis. Finally, it looks forwards and highlights future possible trends and directions in the microarray arena.

Surface manipulation of biomolecules for cell microarray applications

Many biological events, such as cellular communication, antigen recognition, tissue repair and DNA linear transfer, are intimately associated with biomolecule interactions at the solid-liquid interface. To facilitate the study and use of these biological events for biodevice and biomaterial applications, a sound understanding of how biomolecules behave at interfaces and a concomitant ability to manipulate biomolecules spatially and temporally at surfaces is required. This is particularly true for cell microarray applications, where a range of biological processes must be duly controlled to maximize the efficiency and throughput of these devices. Of particular interest are transfected-cell microarrays (TCMs), which significantly widen the scope of microarray genomic analysis by enabling the high-throughput analysis of gene function within living cells. This article reviews this current research focus, discussing fundamental and applied research into the spatial and temporal surface manipulation of DNA, proteins and other biomolecules and the implications of this work for TCMs.