Engineering blood and lymphatic microvascular networks

The human vasculature plays a crucial role in the blood supply of nearly all organs as well as the drainage of the interstitial fluid. Consequently, if these physiological systems go awry, pathological changes might occur. Hence, the regeneration of existing vessels, as well as approaches to engineer artificial blood and lymphatic structures represent current challenges within the field of vascular research. In this review, we provide an overview of both the vascular blood circulation and the long-time neglected but equally important lymphatic system, with regard to their organotypic vasculature. We summarize the current knowledge within the field of vascular tissue engineering focusing on the design of co-culture systems, thereby mainly discussing suitable cell types, scaffold design and disease models. This review will mainly focus on addressing those subjects concerning atherosclerosis. Moreover, current technological approaches such as vascular organ-on-a-chip models and microfluidic devices will be discussed.

Bioprinted hASC-laden cell constructs with mechanically stable and cell alignment cue for tenogenic differentiation

3D bioprinting is a technology that enables the precise and controlled deposition of cells and an artificial extracellular matrix (ECM) to create functional tissue constructs. However, current 3D bioprinting methods still struggle to obtain mechanically stable and unique cell-morphological structures, such as fully aligned cells. In this study, we propose a new 3D bioprinting approach that utilizes a high concentration of bioink without cells to support mechanical properties and drag flow to fully align cells in a thin bath filled with cell-laden bioink, resulting in a hybrid cell-laden construct with a mechanical stable and fully aligned cell structure. To demonstrate the feasibility of this approach, we used it to fabricate a cell-laden construct using human adipose stem cells (hASCs) for tendon tissue engineering. To achieve appropriate processing conditions, various factors such as the bioink concentration, nozzle moving speed, and volume flow rate were considered. To enhance the biocompatibility of the cell-laden construct, we used porcine decellularized tendon ECM.In vitrocellular responses, including tenogenic differentiation of the fabricated hybrid cell structures with aligned or randomly distributed cells, were evaluated using hASCs. In addition, the mechanical properties of the hybrid cell-laden construct could be adjusted by controlling the concentration of the mechanically reinforcing strut using methacrylated tendon-decellularized extracellular matrix. Based on these results, the hybrid cell-laden structure has the potential to be a highly effective platform for the alignment of musculoskeletal tissues.

System for Patterning Polydopamine and VAPG Peptide on Polytetrafluoroethylene and Biodegradable Polyesters for Patterned Growth of Smooth Muscle Cells In Vitro

Biomaterial's surface functionalization for selective adhesion and patterned cell growth remains essential in developing novel implantable medical devices for regenerative medicine applications. We built and applied a 3D-printed microfluidic device to fabricate polydopamine (PDA) patterns on the surface of polytetrafluoroethylene (PTFE), poly(l-lactic acid-co-D,l-lactic acid) (PLA), and poly(lactic acid-co-glycolic acid) (PLGA). Then, we covalently attached the Val-Ala-Pro-Gly (VAPG) peptide to the created PDA pattern to promote the adhesion of the smooth muscle cells (SMCs). We proved that the fabrication of PDA patterns allows for the selective adhesion of mouse fibroblast and human SMCs to PDA-patterned surfaces after only 30 min of in vitro cultivation. After 7 days of SMC culture, we observed the proliferation of cells only along the patterns on PTFE but over the entire surface of the PLA and PLGA, regardless of patterning. This means that the presented approach is beneficial for application to materials resistant to cell adhesion and proliferation. The additional attachment of the VAPG peptide to the PDA patterns did not bring measurable benefits due to the high increase in adhesion and patterned cell proliferation by PDA itself.

Advances in 3D printing of composite scaffolds for the repairment of bone tissue associated defects

The conventional methods of using autografts and allografts for repairing defects in bone, the osteochondral bone and the cartilage tissue have many disadvantages, like donor site morbidity and shortage of donors. Moreover, only 30% of the implanted grafts are shown to be successful in treating the defects. Hence, exploring alternative techniques such as tissue engineering to treat bone tissue associated defects is promising as it eliminates the above-mentioned limitations. To enhance the mechanical and biological properties of the tissue engineered product, it is essential to fabricate the scaffold used in tissue engineering by the combination of various biomaterials. Three-dimensional (3D) printing, with its ability to print composite materials and with complex geometry seems to have a huge potential in scaffold fabrication technique for engineering bone associated tissues.This review summarizes the recent applications and future perspectives of 3D printing technologies in the fabrication of composite scaffolds used in bone, osteochondral and cartilage tissue engineering. Key developments in the field of 3D printing technologies involves the incorporation of various biomaterials and cells in printing composite scaffolds mimicking physiologically relevant complex geometry & gradient porosity. Much recently, the emerging trend of printing smart scaffolds which can respond to external stimulus such as temperature, pH and magnetic field, known as 4D printing is gaining immense popularity and can be considered as the future of 3D printing applications in the field of tissue engineering. This article is protected by copyright. All rights reserved.

Adhesive-Based Fabrication Technique for Culture of Lung Airway Epithelial Cells with Applications in Cell Patterning and Microfluidics

This work describes a versatile and cost-effective cell culture method for micropatterning and growing adherent cells on porous membranes using pressure-sensitive double-sided adhesives. This technique also allows cell culture using conventional methods and their easy integration into microfluidic chip devices. Adhesives can be used to form different patterns of cultured cells, which can be used for cell proliferation and wound-healing models. To demonstrate the viability of our system, we evaluate the toxicity effect of five different adhesives on two distinct airway epithelial cell lines and show functional applications for cell patterning and microfluidic cell culture chip fabrication. We developed a sandwiched microfluidic device that enabled us to culture cells in a submerged condition and transformed it into a dynamic platform when required. The viability of cells and their inflammatory responses to IL-1β stimulation were investigated. Our technique is applicable for conventional culturing of cells, widely available in biomedical research labs, while enabling the introduction of perfusion for an advanced dynamic cell culture model when needed.

Surface Creasing-Induced Micropatterned GelMA Using Heating-Hydration Fabrication for Effective Vascularization

BACKGROUND

Surface modification is used to modify the biomaterials for the regulation of cell culture using different approaches, such as chemical graft and mechanical treatment. However, those conventional methodologies often require precise fabrication in a high resolution involving either high cost or laborious steps to remove chemical residues that are toxic to the cells.

METHODS

A novel and simple method was proposed and evaluated to rapidly generate surface ceases on the gelatin methacrylate (gelMA) surface using the heating-hydration process. Human umbilical vein endothelial cells (HUVECs) were cultured on the gelMA surface. The surface binding was characterized using the RGD (Arg-Gly-Asp) antibodies and cell adhesion pattern captured by scanning electron microscopy. The effect of the heating-hydration parameters on the creasing formation was investigated. The morphology of HUVECs cultured on such micropatterned gelMA was characterized and compared.

RESULTS

It is found that the hydration solution, gelMA mixture, and hydration rate are the major factors that influence the cracking sizes in the range from 20 to 120 µm which resulted in capillary-like patterns on the gelMA surface. Low concentration of gelMA, high water concentration of cooling agent, and slow hydration rate result in the long creases, and heating of at least 60 min is required for complete dehydration. Strong fluorescence was around the creases with RGD-staining. Consequently, micropatterned gelMA demonstrated good biocompatibility with endothelial cells with more than 95% cell viability and continuous cell proliferation throughout 2 weeks as well as a good trace of neovascular formation. In comparison, normal gelMA surface did not exhibit RGD-fluorescent signals, and the cultured HUVECs on it were rounded with no spreading for network formation.

CONCLUSION

The heating-hydration approach can successfully and easily produce the micropatterned gelMA that allows rapid and effective vascularization to potentially improve the functionalities of the tissue-engineered construct.

3D in vitro models of skeletal muscle: myopshere, myobundle and bioprinted muscle construct

Typical two-dimensional (2D) culture models of skeletal muscle-derived cells cannot fully recapitulate the organization and function of living muscle tissues, restricting their usefulness in in-depth physiological studies. The development of functional 3D culture models offers a major opportunity to mimic the living tissues and to model muscle diseases. In this respect, this new type of in vitro model significantly increases our understanding of the involvement of the different cell types present in the formation of skeletal muscle and their interactions, as well as the modalities of response of a pathological muscle to new therapies. This second point could lead to the identification of effective treatments. Here, we report the significant progresses that have been made the last years to engineer muscle tissue-like structures, providing useful tools to investigate the behavior of resident cells. Specifically, we interest in the development of myopshere- and myobundle-based systems as well as the bioprinting constructs. The electrical/mechanical stimulation protocols and the co-culture systems developed to improve tissue maturation process and functionalities are presented. The formation of these biomimetic engineered muscle tissues represents a new platform to study skeletal muscle function and spatial organization in large number of physiological and pathological contexts.

Micropatterned Smart Culture Surfaces via Multi-Step Physical Coating of Functional Block Copolymers for Harvesting Cell Sheets with Controlled Sizes and Shapes

Cell micropatterning on micropatterned thermoresponsive polymer-based culture surfaces facilitates the creation of on-demand and functional cell sheets. However, the fabrication of micropatterned surfaces generally includes complicated procedures with multi-step chemical reactions. To overcome this issue, this study proposes a facile preparation of micropatterned thermoresponsive surfaces via a two-step physical coating of two different diblock copolymers. Both copolymers contain poly(butyl methacrylate) blocks as hydrophobic anchors for water-stable polymer deposition. At first, thermoresponsive polymer layers are constructed on cell culture dishes via spin-coating block copolymers containing poly(N-isopropylacrylamide) blocks that exhibit a transition temperature of ≈30 °C in aqueous media. To create polymer micropatterns on the thermoresponsive surfaces, microcontact printing of block copolymers containing hydrophilic poly(N-acryloylmorpholine) (PNAM) blocks is performed using polydimethylsiloxane stamps. Stamped PNAM-based block polymers are adsorbed to the outermost thermoresponsive surfaces, and increase the surface hydrophilicity with decreasing protein adsorption. Cells adhere and proliferate on the thermoresponsive domains at 37 °C, whereas the stamped hydrophilic domains remain cell-repellent for 7 days. At 20 °C, cell sheets with controlled sizes and shapes are harvested from the surfaces with the desired micropatterns. This technique is useful for the preparation of micropatterned polymer surfaces for various biomedical applications.

Photo-Cleavable Peptide-Poly(Ethylene Glycol) Conjugate Surfaces for Light-Guided Control of Cell Adhesion

Photo-responsive cell attachment surfaces can simplify patterning and recovery of cells in microdevices for medicinal and pharmaceutical research. We developed a photo-responsive surface for controlling the attachment and release of adherent cells on a substrate under light-guidance. The surface comprises a poly(ethylene glycol) (PEG)-based photocleavable material that can conjugate with cell-adhesive peptides. Surface-bound peptides were released by photocleavage in the light-exposed region, where the cell attachment was subsequently suppressed by the exposed PEG. Simultaneously, cells selectively adhered to the peptide surface at the unexposed microscale region. After culture, the adhered and spread cells were released by exposure to a light with nontoxic dose level. Thus, the present surface can easily create both cell-adhesive and non-cell-adhesive regions on the substrate by single irradiation of the light pattern, and the adhered cells were selectively released from the light-exposed region on the cell micropattern without damage. This study shows that the photo-responsive surface can serve as a facile platform for the remote-control of patterning and recovery of adherent cells in microdevices.

Enhanced efficiency in isolation and expansion of hAMSCs via dual enzyme digestion and micro-carrier

A two-stage method of obtaining viable human amniotic stem cells (hAMSCs) in large-scale is described. First, human amniotic stem cells are isolated via dual enzyme (collagenase II and DNAase I) digestion. Next, relying on a culture of the cells from porous chitosan-based microspheres in vitro, high purity hAMSCs are obtained in large-scale. Dual enzymatic (collagenase II and DNase I) digestion provides a primary cell culture and first subculture with a lower contamination rate, higher purity and a larger number of isolated cells. The obtained hAMSCs were seeded onto chitosan microspheres (CM), gelatin-chitosan microspheres (GCM) and collagen-chitosan microspheres (CCM) to produce large numbers of hAMSCs for clinical trials. Growth activity measurement and differentiation essays of hAMSCs were realized. Within 2 weeks of culturing, GCMs achieved over 1.28 ± 0.06 × 107 hAMSCs whereas CCMs and CMs achieved 7.86 ± 0.11 × 106 and 1.98 ± 0.86 × 106 respectively within this time. In conclusion, hAMSCs showed excellent attachment and viability on GCM-chitosan microspheres, matching the hAMSCs' normal culture medium. Therefore, dual enzyme (collagenase II and DNAase I) digestion may be a more useful isolation process and culture of hAMSCs on porous GCM in vitro as an ideal environment for the large-scale expansion of highly functional hAMSCs for eventual use in stem cell-based therapy.

Bioinspired Nanocomposites: Applications in Disease Diagnosis and Treatment

Recent advancement in the field of synthesis and application of nanomaterials provided holistic approach for both diagnosis as well as treatment of diseases. Briefly, three-dimensional scaffold and geometry of bioinspired nanocarriers modulate bulk properties of loaded drug at molecular/ atomic structures in a way to conjointly modulate pathological as well as altered metabolic states of diseases, in very predictable and desired manners at a specific site of the target. While, from the pharmacotechnical point of views, the bioinspired nanotechnology processes carriers either favor to enhance the solubility of poorly aqueous soluble drugs or enable well-controlled sustained release profiles, to reduce the frequency of drug regimen. Consequently, from biopharmaceutical point of view, these composite materials, not only minimize first pass metabolism but also significantly enhance in-vivo biodistribution, permeability, bio-adhesion and diffusivity. In lieu of the above arguments, the nano-processed materials exhibit an important role for diagnosis and treatments. In the diagnostic center, recent emergences and advancement in the tools and techniques to diagnose the unrevealed diseases with the help of instruments such as, computed tomography, magnetic resonance imaging etc; heavily depend upon nanotechnology-based materials. In this paper, a brief introduction and recent application of different types of nanomaterials in the field of tissue engineering, cancer treatment, ocular therapy, orthopedics, and wound healing as well as drug delivery system are thoroughly discussed.

Binary polymer brush patterns from facile initiator stickiness for cell culturing

We report a new initiator stickiness method to fabricate micropatterned binary polymer brush surfaces, which are ideal platforms for studying cell adhesion behavior. The atom transfer radical polymerization (ATRP) initiator, ω-mercaptoundecyl bromoisobutyrate (MUDBr), is found to adsorb on several hosting polymer brushes, including poly[oligo(ethylene glycol)methyl ether methacrylate] (POEGMA), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(glycidyl methacrylate) (PGMA) brushes. Based on the initiator stickiness, micropatterned initiator molecules are printed onto a layer of homogenous hosting polymer brushes via microcontact printing (μCP), and then, vertically, a patterned second layer of polymer brushes is grown from the initiator areas. With this simple, fast, and additive method, we demonstrate the fabrication of various binary polymer brushes, and show their applications for patterning cell microarrays and controlling cell orientation. This new approach to generating binary polymer brushes shows great potential for the manipulation of interfacial phenomena, facilitating a range of applications from semiconductors and lubrication to fundamental cell biology studies.

Single-cell Analysis with Microfluidic Devices

A microfluidic device as a pivotal research tool in chemistry and life science is now widely recognized. Indeed, microfluidic techniques have made significant advancements in fundamental research, such as the inherent heterogeneity of single-cells studies in cell populations, which would be helpful in understanding cellular molecular mechanisms and clinical diagnosis of major diseases. Single-cell analyses on microdevices have shown great potential for precise fluid control, cell manipulation, and signal output with rapid and high throughput. Moreover, miniaturized devices also have open functions such as integrating with traditional detection methods, for example, optical, electrochemical or mass spectrometry for single-cell analysis. In this review, we summarized recent advances of single-cell analysis based on various microfluidic approaches from different dimensions, such as in vitro, ex vivo, and in vivo analysis of single cells.

Surface engineering of spongy bacterial cellulose via constructing crossed groove/column micropattern by low-energy CO2 laser photolithography toward scar-free wound healing

Bacterial cellulose (BC) is a bio-derived polymer, and it has been considered as an excellent candidate material for tissue engineering. In this study, a crossed groove/column micropattern was constructed on spongy, porous BC using low-energy CO₂ laser photolithography. Applying the targeted immobilization of a tetrapeptide consisting of Arginine-Glycine-Aspartic acid-Serine (H-Arg-Gly-Asp-Ser-OH, RGDS) as a fibronectin onto the column platform surface, the resulting micropatterned BC (RGDS-MPBC) exhibited dual affinities to fibroblasts and collagen. Material characterization of RGDS-MPBC revealed that the micropattern was built by the column part with size of ~100 × 100 μm wide and ~100 μm deep, and the groove part with size of ~150 μm wide. Hydrating the MPBC did not result in the collapse of the integrity of the micropattern, suggesting its potential application in a highly hydrated wound environment. Cell culture assays revealed that the RGDS-MPBC exhibited an improved cytotoxicity to mouse fibroblasts L929, as compared to the pristine BC. Meanwhile, it was observed that the RGDS-MPBC was able to guide the ordered aggregation of human skin fibroblast (HSF) cells on the column platform surface, and no HSF cells were found in the groove channels. Over time, it was found that a dense network of collagen was gradually established across the groove channels. Furthermore, the in-vivo animal study preliminarily demonstrated the scar-free healing potential of the micropatterned BC materials. Therefore, this RGDS-MPBC material exhibited its advantages in guiding cell migration and collagen distribution, which could present a prospect in the establishment of "basket-woven" organization of collagen in normal skin tissue against the formation of dense, parallel aggregation of collagen fibers in scar tissue toward scar-free wound healing outcome.

Impact of Three-Dimentional Culture Systems on Hepatic Differentiation of Puripotent Stem Cells and Beyond

Generation of functional hepatocytes from human pluripotent stem cells (hPSCs) is a vital tool to produce large amounts of human hepatocytes, which hold a great promise for biomedical and regenerative medicine applications. Despite a tremendous progress in developing the differentiation protocols recapitulating the developmental signalling and stages, these resulting hepatocytes from hPSCs yet achieve maturation and functionality comparable to those primary hepatocytes. The absence of 3D milieu in the culture and differentiation of these hepatocytes may account for this, at least partly, thus developing an optimal 3D culture could be a step forward to achieve this aim. Hence, review focuses on current development of 3D culture systems for hepatic differentiation and maturation and the future perspectives of its application.

Incorporation of nanoparticles into transplantable decellularized matrices: Applications and challenges

Decellularization of tissues can significantly improve regenerative medicine and tissue engineering by producing natural, less immunogenic, three-dimensional, acellular matrices with high biological activity for transplantation. Decellularized matrices retain specific critical components of native tissues such as stem cell niche, various growth factors, and the ability to regenerate in vivo. However, recellularization and functionalization of these matrices remain limited, highlighting the need to improve the characteristics of decellularized matrices. Incorporating nanoparticles into decellularized tissues can overcome these limitations because nanoparticles possess unique properties such as multifunctionality and can modify the surface of decellularized matrices with additional growth factors, which can be loaded onto the nanoparticles. Therefore, in this minireview, we highlight the various approaches used to improve decellularized matrices with incorporation of nanoparticles and the challenges present in these applications.

Multiorgan Microphysiological Systems for Drug Development: Strategies, Advances, and Challenges

Traditional cell culture and animal models utilized for preclinical drug screening have led to high attrition rates of drug candidates in clinical trials due to their low predictive power for human response. Alternative models using human cells to build in vitro biomimetics of the human body with physiologically relevant organ-organ interactions hold great potential to act as "human surrogates" and provide more accurate prediction of drug effects in humans. This review is a comprehensive investigation into the development of tissue-engineered human cell-based microscale multiorgan models, or multiorgan microphysiological systems for drug testing. The evolution from traditional models to macro- and microscale multiorgan systems is discussed in regards to the rationale for recent global efforts in multiorgan microphysiological systems. Current advances in integrating cell culture and on-chip analytical technologies, as well as proof-of-concept applications for these multiorgan microsystems are discussed. Major challenges for the field, such as reproducibility and physiological relevance, are discussed with comparisons of the strengths and weaknesses of various systems to solve these challenges. Conclusions focus on the current development stage of multiorgan microphysiological systems and new trends in the field.

Engineering Concepts in Stem Cell Research

The field of regenerative medicine integrates advancements made in stem cells, molecular biology, engineering, and clinical methodologies. Stem cells serve as a fundamental ingredient for therapeutic application in regenerative medicine. Apart from stem cells, engineering concepts have equally contributed to the success of stem cell based applications in improving human health. The purpose of various engineering methodologies is to develop regenerative and preventive medicine to combat various diseases and deformities. Explosion of stem cell discoveries and their implementation in clinical setting warrants new engineering concepts and new biomaterials. Biomaterials, microfluidics, and nanotechnology are the major engineering concepts used for the implementation of stem cells in regenerative medicine. Many of these engineering technologies target the specific niche of the cell for better functional capability. Controlling the niche is the key for various developmental activities leading to organogenesis and tissue homeostasis. Biomimetic understanding not only helped to improve the design of the matrices or scaffolds by incorporating suitable biological and physical components, but also ultimately aided adoption of designs that helped these materials/devices have better function. Adoption of engineering concepts in stem cell research improved overall achievement, however, several important issues such as long-term effects with respect to systems biology needs to be addressed. Here, in this review the authors will highlight some interesting breakthroughs in stem cell biology that use engineering methodologies.

Multiphoton Fabrication of Fibronectin-Functionalized Protein Micropatterns: Stiffness-Induced Maturation of Cell-Matrix Adhesions in Human Mesenchymal Stem Cells

Cell-matrix adhesions are important structures governing the interactions between cells and their microenvironment at the cell-matrix interface. The focal complex (FC) and focal adhesion (FA) have been substantially investigated in conventional planar culture systems using fibroblasts as an in vitro model. However, the formation of more mature types of cell-matrix adhesion in human mesenchymal stem cells (hMSCs), including fibrillar adhesion (FBA) and 3D matrix adhesion (3DMA), have not been fully elucidated. Here we investigate the niche factor(s) that influence(s) the maturation of FBA and 3DMA by using multiphoton fabrication-based micropatterning. First, the bovine serum albumin (BSA)-made protein micropatterns were functionalized by incorporating various concentrations of fibronectin (FN) in fabrication solution. The amount of cross-linked FN is positively correlated with the initial concentration of FN in the reaction liquid, as verified by immunofluorescence staining. On the other hand, the anisotropic FN-functionalized micropatterns were fabricated by varying the length (i.e., in-plane stiffness) and height (i.e., bending stiffness) of micropatterns, respectively. Finally, hMSCs were cultured on these micropatterns for 2 h and 1 day to determine the formation of FBA and 3DMA, respectively, using immunofluorescence staining. Results demonstrated that FN-functionalized micropatterns with high anisotropy in x-y dimension benefit FBA maturation. Furthermore, niche factors such as higher bending and in-plane stiffness and the presence of abundant fibronectin have a positive effect on the maturation of FN-based cell-matrix adhesion. These findings could provide some new perspectives on designing platforms for further cell niche study and rationalizing scaffold design for tissue engineering.

High throughput micropatterning of interspersed cell arrays using capillary assembly

A novel technology is reported to immobilize different types of particles or cells on a surface at predefined positions with a micrometric precision. The process uses capillary assembly on arrays of crescent-shaped structures with different orientations. Sequential assemblies in different substrate orientations with different types of particles allow for the creation of imbricated and multiplexed arrays. In this work up to four different types of particles were deterministically localized on a surface. Using this process, antibody coated microparticles were assembled on substrates and used as capture patterns for the creation of complex cell networks. This new technology may have numerous applications in biology, e.g. for fast cell imaging, cell-cell interactions studies, or construction of cell arrays.

Anisotropic Materials for Skeletal-Muscle-Tissue Engineering

Repair of damaged skeletal-muscle tissue is limited by the regenerative capacity of the native tissue. Current clinical approaches are not optimal for the treatment of large volumetric skeletal-muscle loss. As an alternative, tissue engineering represents a promising approach for the functional restoration of damaged muscle tissue. A typical tissue-engineering process involves the design and fabrication of a scaffold that closely mimics the native skeletal-muscle extracellular matrix (ECM), allowing organization of cells into a physiologically relevant 3D architecture. In particular, anisotropic materials that mimic the morphology of the native skeletal-muscle ECM, can be fabricated using various biocompatible materials to guide cell alignment, elongation, proliferation, and differentiation into myotubes. Here, an overview of fundamental concepts associated with muscle-tissue engineering and the current status of muscle-tissue-engineering approaches is provided. Recent advances in the development of anisotropic scaffolds with micro- or nanoscale features are reviewed, and how scaffold topographical, mechanical, and biochemical cues correlate to observed cellular function and phenotype development is examined. Finally, some recent developments in both the design and utility of anisotropic materials in skeletal-muscle-tissue engineering are highlighted, along with their potential impact on future research and clinical applications.

Microengineered platforms for co-cultured mesenchymal stem cells towards vascularized bone tissue engineering

Bone defects are common disease requiring thorough treatments since the bone is a complex vascularized tissue that is composed of multiple cell types embedded within an intricate extracellular matrix (ECM). For past decades, tissue engineering using cells, proteins, and scaffolds has been suggested as one of the promising approaches for effective bone regeneration. Recently, many researchers have been interested in designing effective platform for tissue regeneration by orchestrating factors involved in microenvironment around tissues. Among factors affecting bone formation, vascularization during bone development and after minor insults via endochondral and intramembranous ossification is especially critical for the long-term support for functional bone. In order to create vascularized bone constructs, the interactions between human mesenchymal stem cells (MSCs) and endothelial cells (ECs) have been investigated using both direct and indirect co-culture studies. Recently, various culture methods including micropatterning techniques, three dimensional scaffolds, and microfluidics have been developed to create micro-engineered platforms that mimic the nature of vascularized bone formation, leading to the creation of functional bone structures. This review focuses on MSCs co-cultured with endothelial cells and microengineered platforms to determine the underlying interplay between co-cultured MSCs and vascularized bone constructs, which is ultimately necessary for adequate regeneration of bone defects.

Improved single-cell culture achieved using micromolding in capillaries technology coupled with poly (HEMA)

Cell studies at the single-cell level are becoming more and more critical for understanding the complex biological processes. Here, we present an optimization study investigating the positioning of single cells using micromolding in capillaries technology coupled with the cytophobic biomaterial poly (2-hydroxyethyl methacrylate) (poly (HEMA)). As a cytophobic biomaterial, poly (HEMA) was used to inhibit cells, whereas the glass was used as the substrate to provide a cell adhesive background. The poly (HEMA) chemical barrier was obtained using micromolding in capillaries, and the microchannel networks used for capillarity were easily achieved by reversibly bonding the polydimethylsiloxane mold and the glass. Finally, discrete cell adhesion regions were presented on the glass surface. This method is facile and low cost, and the reagents are commercially available. We validated the cytophobic abilities of the poly (HEMA), optimized the channel parameters for higher quality and more stable poly (HEMA) patterns by investigating the effects of changing the aspect ratio and the width of the microchannel on the poly (HEMA) grid pattern, and improved the single-cell occupancy by optimizing the dimensions of the cell adhesion regions.

Facile preparation of a photoactivatable surface on a 96-well plate: a versatile and multiplex cell migration assay platform

A novel photoactivatable 96-well plate based on photocleavable PEG and poly-d-lysine serves as a useful high-throughput cell migration assay platform.

Micropatterning strategies to engineer controlled cell and tissue architecture in vitro

Micropatterning strategies, which enable control over cell and tissue architecture in vitro, have emerged as powerful platforms for modelling tissue microenvironments at different scales and complexities. Here, we provide an overview of popular micropatterning techniques, along with detailed descriptions, to guide new users through the decision making process of which micropatterning procedure to use, and how to best obtain desired tissue patterns. Example techniques and the types of biological observations that can be made are provided from the literature. A focus is placed on microcontact printing to obtain co-cultures of patterned, confluent sheets, and the challenges associated with optimizing this protocol. Many issues associated with microcontact printing, however, are relevant to all micropatterning methodologies. Finally, we briefly discuss challenges in addressing key limitations associated with current micropatterning technologies.

Dynamic photochemical silane micropatterning

This protocol describes a method for dynamic patterning cells on a glass coverslip. The glass substrate is first functionalized with photocleavable silane bearing 2-nitrobenzyl group, thereafter a cell-repellent polymer, poly(ethylene glycol) (PEG), is conjugated. Upon absorption of near-UV light, the PEG is cleaved from the surface, changing the surface from non-cell-adhesive to cell-adhesive. The method allows not only for spatially controlling cell attachment on the substrate (conventional patterning), but also inducing cell migration or coculturing heterotypic cells (dynamic patterning). Furthermore, it should be emphasized that the surface is compatible with fluorescence imaging in a high-resolution inverted objective setup as it is composed of a normal glass coverslip functionalized with the thin layers. In this chapter, I describe the procedure for the synthesis of the silane molecule, the preparation of the photoactivatable surface, and its application for dynamic cell patterning.

Metabolic variation of HeLa cells migrating on microfabricated cytophilic channels studied by the fluorescence lifetime of NADH

This manuscript reports an in situ surface-modification of a substrate by laser ablation for monitoring the metabolic physiology of migrating cells through guided channels.

Dynamic photochemical lipid micropatterning for manipulation of nonadherent mammalian cells

Cell micropatterning methods with stimuli-responsive dynamic surfaces are getting a lot of attention in a wide variety of research fields, ranging from cell engineering to fundamental studies in cell biology. The surface of a slide coated with photo-cleavable poly(ethylene glycol) (PEG)-lipid can be used to spatiotemporally control cell immobilization and release by light irradiation. On the basis of this surface, it is easy to design simple methods for making a fine micropattern of any kind of cell. Furthermore, target cells can be selectively and rapidly released from this surface by light irradiation. In this review, we first describe how to obtain the photo-cleavable PEG-lipid from commercially available compounds through a facile four-step synthesis. Next, as a cell-patterning method, the protocols of coating substrates with the PEG-lipid, irradiating a pattern of light onto the coated substrate, and loading cells onto the irradiated surface are described. These protocols require no expensive equipment and potentially apply to any substrates that can adsorb serum albumin or chemically expose amine moieties on their surfaces. Finally, as an advanced method, cell release from the PEG-lipid surface in microfluidic devices is introduced. We also discuss the advantages and the possible applications of the present dynamic cell-patterning method.

In situ laser micropatterning of proteins for dynamically arranging living cells

This study shows the modification of the surface of polymer-layered glass substrates to form biofunctional micropatterns through femtosecond laser ablation in an aqueous solution. Domains of micrometer size on a substrate can be selectively converted from proteinphobic (resistant to protein adsorption) to proteinphilic, allowing patterning of protein features under physiological aqueous conditions. When femtosecond laser pulses (800 nm, 1 kHz, 200-500 nJ per pulse) were focused on and scanned on the substrate, which was glass covered with the proteinphobic polymer 2-methacryloyloxyethylphosphorylcholine (MPC), the surface became proteinphilic. Surface analysis by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) reveals that the laser ablates the MPC polymer. Extracellular matrix (ECM) proteins were bound to the laser-ablated surface by physisorption. Since femtosecond laser ablation is induced under physiological aqueous conditions, this approach can form micropatterns of functional ECM proteins with minimal damage. This method was applied to pattern collagen, laminin, and gelatin on the substrate. Removal of an ECM protein from the substrate followed by replacement with another ECM protein was achieved on demand at a specific location and time by the same laser ablation method. Living cells adhered to the fabricated domains where ECM proteins were arranged. The modification of patterning during cell culture was used to control cell migration and form arrays of different cells.

Dynamic substrate based on photocleavable poly(ethylene glycol): zeta potential determines the capability of geometrical cell confinement

Dynamic substrates whose cell adhesiveness changes in response to an external stimulus are useful not only for patterning cells in various geometries but also for inducing cell migration or arraying heterotypic cells. The requirements for such applications are high switching efficiency in cell adhesiveness and long-term persistence of the created cellular patterns. In this study, we prepared a dynamic substrate bearing photocleavable poly(ethylene glycol) (PEG) and examined the effect of the surface PEG density and the charge of cationic base materials on the above-mentioned key requirements. An amino-terminated substrate with a certain amino group density and charge was functionalized with photocleavable PEG5K, with and without subsequent backfilling of photocleavable PEG2K. The PEG chains made the surface non-cell-adhesive, but subsequent near-UV irradiation of the substrate induced photocleavage of the PEG, eventually making the surface cell-adhesive. The substrates were analyzed by atomic force microscopy, contact angle measurements, ellipsometry, and zeta potential measurements, complemented with protein adsorption observations. Although the density of amino group in the base material affected both the grafting efficiency of the backfilling PEG and the electrokinetic potential mainly in the positive range, the latter mainly determined the protein- and cell-repelling abilities of the substrates. Furthermore, varying the surface compositions had almost no effect on the switching efficiency in the early stage of the culture, but it became more significant after culturing cells for a longer time; the cells fouled the nonirradiated PEGylated regions earlier on the surfaces with higher positive zeta potentials. These results indicate that the zeta potential is an essential factor in the long-term persistence of cellular patterns on photoactivatable substrates. This study not only provides a recipe for the development of a dynamic substrate with an adequate time frame but also clarifies how the interfacial nanoarchitectures, composed of the nanometer-scale PEG brushes and charged base materials, affect the biocompatibility.

On the possible use of exogenous histones in cell technology

The prospect of developing transport systems using histones for site-specific delivery of therapeutic agents that have poor penetration characteristics through cellular membranes and tissue barriers has been investigated. Histones immobilized on microspheres can also be used to modify surfaces intended for cell cultivation, facilitating adhesion, proliferation and network formation by interactions of cells through contacts with several microspheres. They can be applied to three-dimensional pore matrices that are designed for producing tissue-like structures in vitro.

Microfabricated biomaterials for engineering 3D tissues

Mimicking natural tissue structure is crucial for engineered tissues with intended applications ranging from regenerative medicine to biorobotics. Native tissues are highly organized at the microscale, thus making these natural characteristics an integral part of creating effective biomimetic tissue structures. There exists a growing appreciation that the incorporation of similar highly organized microscale structures in tissue engineering may yield a remedy for problems ranging from vascularization to cell function control/determination. In this review, we highlight the recent progress in the field of microscale tissue engineering and discuss the use of various biomaterials for generating engineered tissue structures with microscale features. In particular, we will discuss the use of microscale approaches to engineer the architecture of scaffolds, generate artificial vasculature, and control cellular orientation and differentiation. In addition, the emergence of microfabricated tissue units and the modular assembly to emulate hierarchical tissues will be discussed.

Study of ethanol induced toxicity in liver explants using microfluidic devices

Current in vitro methodologies for the culture and analysis of liver specific responses lack the sophistication of in vivo dynamics. In this work, a microfluidic based experimental methodology has been utilized to reproduce a biomimetic microenvironment in which pseudo in vivo liver tissue studies can be carried out under in vitro conditions. This innovative technique, which exploits the inherent advantages of microfluidic technology, has been utilised to study the viability and functionality of explant liver tissue over four days in the presence of varying concentrations of ethanol. Concentrations of ethanol as low as 20 mM have produced a decrease in WST-1 metabolism, a marker of mitochondrial activity, and an increase lactose dehydrogenase release, reflecting cell death, in the explant samples; these effects increase with higher ethanol concentrations. A concomitant decrease in albumin and urea synthesis was also observed. We believe the proposed methodology is widely applicable and is clearly of relevance to biological and clinical research including drug development and toxicity, as well as enabling better fundamental understanding of tissue/cell processes.

Reprogramming cell shape with laser nano-patterning

Cell shape in vitro can be directed by geometrically-defined micropatterned adhesion substrates. However conventional methods are limited by the fixed micropattern design, which can not recapitulate the dynamic changes of the cell's microenvironment. Here, we manipulate the shape of living cells in real time by using scanned and tightly focused pulsed laser to introduce additional geometrically-defined adhesion sites. This easy-to-handle method allows a precise control of specific actin-based structures that regulate cell architecture. Actin filament bundles or branched meshworks were induced, displaced or removed in response to specific dynamic modifications of cell adhesion pattern. Isotropic branched actin meshworks could be forced to assemble locally new stress fibers and polarise in response to specific geometrical cues. The sub-micrometer resolution of the laser patterning allowed us to identify the critical distances between cell adhesion sites required for cell shape extension and contraction.

Cell patterning using a template of microstructured organosilane layer fabricated by vacuum ultraviolet light lithography

Micropatterning techniques have become increasingly important in cellular biology. Cell patterning is achieved by various methods. Photolithography is one of the most popular methods, and several light sources (e.g., excimer lasers and mercury lamps) are used for that purpose. Vacuum ultraviolet (VUV) light that can be produced by an excimer lamp is advantageous for fabricating material patterns, since it can decompose organic materials directly and efficiently without photoresist or photosensitive materials. Despite the advantages, applications of VUV light to pattern biological materials are few. We have investigated cell patterning by using a template of a microstructured organosilane layer fabricated by VUV lithography. We first made a template of a microstructured organosilane layer by VUV lithography. Cell adhesive materials (poly(d-lysine) and polyethyleneimine) were chemically immobilized on the organosilane template, producing a cell adhesive material pattern. Primary rat cardiac and neuronal cells were successfully patterned by culturing them on the pattern substrate. Long-term culturing was attained for up to two weeks for cardiac cells and two months for cortex cells. We have discussed the reproducibility of cell patterning and made suggestions to improve it.