Combined use of vancomycin-modified Ag-coated magnetic nanoparticles and secondary enhanced nanoparticles for rapid surface-enhanced Raman scattering detection of bacteria

Design and synthesis of vancomycin-functionalized ZnFe2 O4 nanoparticles as an effective antibacterial agent against methicillin-resistant Staphylococcus aureus

The emergence of antibiotic-resistant bacterial infections is a principal threat to global health. Functionalization of nanomaterial with antibiotics is known as a useful method for increasing the effectiveness of existing antibiotics. In this study, vancomycin-functionalized ZnFe2 O4 nanocomposite (ZnFe2 O4 @Cell@APTES@Van) was synthesized, and its functional groups and particle size were characterized using Fourier-transform infrared spectroscopy, thermogravimetric analysis, dynamic light scattering, scanning electron microscope, and transmission electron microscopy. The antibacteria activity of the synthesized nanocomposite was evaluated using minimum inhibitory concentration and minimum bactericidal concentration against Escherichia coli, Staphylococcus aureus, and methicillin-resistant Staphylococcus aureus (MRSA). Cytotoxicity assay was done by 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide method. Characterization analyses of synthesized nanocomposite confirmed the binding of vancomysin on the surface of ZnFe2 O4 @Cell@APTES. Nanocomposite exhibited an aggregated semi-spherical structure with hydrodynamic radii of ∼382 nm. In vitro antibacterial activity test showed that vancomycin and vancomycin functionalized ZnFe2 O4 have no antibacterial effect against E. coli. S. aureus was sensitive to vancomycin and ZnFe2 O4 @Cell@APTES@Van NPs and ZnFe2 O4 NPs did not improve vancomycin antibacterial activity against these bacteria. MRSA is resistant to vancomycin while ZnFe2 O4 @Cell@APTES@Van NPs was efficient in inhibiting MRSA growth. In summary, this study showed that attachment of vancomycin to ZnFe2 O4 NPs was increased its antibacterial activity against MRSA.

Key steps for improving bacterial SERS signals in complex samples: Separation, recognition, detection, and analysis

Rapid and reliable detection of pathogenic bacteria is absolutely essential for research in environmental science, food quality, and medical diagnostics. Surface-enhanced Raman spectroscopy (SERS), as an emerging spectroscopic technique, has the advantages of high sensitivity, good selectivity, rapid detection speed, and portable operation, which has been broadly used in the detection of pathogenic bacteria in different kinds of complex samples. However, the SERS detection method is also challenging in dealing with the detection difficulties of bacterial samples in complex matrices, such as interference from complex matrices, confusion of similar bacteria, and complexity of data processing. Therefore, researchers have developed some technologies to assist in SERS detection of bacteria, including both the front-end process of obtaining bacterial sample data and the back-end data processing process. The review summarizes the key steps for improving bacterial SERS signals in complex samples: separation, recognition, detection, and analysis, highlighting the principles of each step and the key roles for SERS pathogenic bacteria analysis, and the interconnectivity between each step. In addition, the current challenges in the practical application of SERS technology and the development trends are discussed. The purpose of this review is to deepen researchers' understanding of the various stages of using SERS technology to detect bacteria in complex sample matrices, and help them find new breakthroughs in different stages to facilitate the detection and control of bacteria in complex samples.

Quantitative real-time PCR and magnetic separation strategy for specific detection of group B streptococcus in perinatal Women's urine

Introduction

Group B streptococcus(GBS)often causes adverse outcomes such as urinary system infection, intrauterine infection, premature birth, and stillbirth in perinatal women. Perinatal screening of GBS is conducive to guiding clinical scientific intervention and improving delivery outcomes.This study quantitative real-time PCR (RT-qPCR) combined with magnetic separation was used for GBS detection.

Materials and methods

Sample pre-treatment in this study involved the utilization of magnetic separation (MS) technology, aiming to expedite the detection process and enhance detection sensitivity, and the cfb gene of group B streptococcus was used as the target gene to establish quantitative real-time PCR (RT-qPCR) to detect group B streptococcus.

Results

It was found that penicillin-functionalized magnetic beads had a good ability to enrich and capture group B Streptococcus.The findings revealed an exceptional detection sensitivity, with the ability to detect B streptococcus in urine samples at levels as low as 102 CFU/mL.

Conclusions

The utilization of MS technology in conjunction with the RT-qPCR (MS-RT-qPCR) assay, as demonstrated in this study, offers a viable approach for prenatal screening of group B streptococcus among perinatal women.

Recent advances and prospects in nanomaterials for bacterial sepsis management

Bacterial sepsis is a life-threatening condition caused by bacteria entering the bloodstream and triggering an immune response, underscoring the importance of early recognition and prompt treatment. Nanomedicine holds promise for addressing sepsis through improved diagnostics, nanoparticle biosensors for detection and imaging, enhanced antibiotic delivery, combating resistance, and immune modulation. However, challenges remain in ensuring safety, regulatory compliance, scalability, and cost-effectiveness before clinical implementation. Further research is needed to optimize design, efficacy, safety, and regulatory strategies for effective utilization of nanomedicines in bacterial sepsis diagnosis and treatment. This review highlights the significant potential of nanomedicines, including improved drug delivery, enhanced diagnostics, and immunomodulation for bacterial sepsis. It also emphasizes the need for further research to optimize design, efficacy, safety profiles, and address regulatory challenges to facilitate clinical translation.

Updates on developing and applying biosensors for the detection of microorganisms, antimicrobial resistance genes and antibiotics: a scoping review

Background

The inappropriate use of antibiotics in clinical and non-clinical settings contributes to the increasing prevalence of multidrug-resistant microorganisms. Contemporary endeavours are focused on exploring novel technological methodologies, striving to create cost-effective and valuable alternatives for detecting microorganisms, antimicrobial resistance genes (ARGs), and/or antibiotics across diverse matrices. Within this context, there exists an increasingly pressing demand to consolidate insights into potential biosensors and their implications for public health in the battle against antimicrobial resistance (AMR).

Methods

A scoping review was carried out to map the research conducted on biosensors for the detection of microorganisms, ARGs and/or antibiotics in clinical and environmental samples. The Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) checklist was used. Articles published from 1999 to November 2022 and indexed in the following databases were included: MEDLINE, EMBASE, Web of Science, BIOSIS Citation index, Derwent Innovations index, and KCI-Korean Journal.

Results

The 48 studies included in the scoping review described the development and/or validation of biosensors for the detection of microorganisms, ARGs and/or antibiotics. At its current stage, the detection of microorganisms and/or ARGs has focused primarily on the development and validation of biosensors in clinical and bacterial samples. By contrast, the detection of antibiotics has focused primarily on the development and validation of biosensors in environmental samples. Asides from target and samples, the intrinsic characteristics of biosensors described in the scoping review were heterogenous. Nonetheless, the number of studies assessing the efficacy and validation of the aforementioned biosensor remained limited, and there was also a lack of comparative analyses against conventional molecular techniques.

Conclusion

Promoting high-quality research is essential to facilitate the integration of biosensors as innovative technologies within the realm of public health challenges, such as antimicrobial resistance AMR. Adopting a One-Health approach, it becomes imperative to delve deeper into these promising and feasible technologies, exploring their potential across diverse sample sets and matrices.

A SERS bioassay based on vancomycin-modified PEI-interlayered nanocomposite and aptamer-functionalized SERS tags for synchronous detection of Acinetobacter baumannii and Klebsiella pneumoniae

Klebsiella pneumoniae (KP) and Acinetobacter baumannii (AB) are two important gram-negative bacteria that cause pneumonia and have been recently known to be associated with food. The rapid detection of these pathogens in food is important to minimize their colonization of the gut and stop new threats of the disease from spreading across the food chain. Herein, a double-edged sword aptasensor was developed for the synchronous detection of KP and AB in food and clinical samples. A highly sensitive, selective, specific, and synchronous detection of the target bacteria was achieved, and the limit of detection (LOD) was 10 cells/mL with a liner range of 50 to 10⁵ cells/mL. The total assay time was 1.5 h. This study does not only provide a new tool for the detection of the target bacteria, but also serves as a promising tool for food safety and pneumonia diagnosis.

Ultrasensitive dual-enhanced sandwich strategy for simultaneous detection of Escherichia coli and Staphylococcus aureus based on optimized aptamers-functionalized magnetic capture probes and graphene oxide-Au nanostars SERS tags

In this work, a novel surface-enhanced Raman scattering (SERS) sandwich strategy biosensing platform has been established for simultaneously detecting Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Fe₃O₄@SiO₂-Au nanocomposites (NCs) with varying amounts of Au nanocrystals were prepared, and the effect of interparticle gaps on SERS activity was studied by finite-difference time-domain (FDTD) method. The optimal magnetic SERS-active substrates (FS-A5) were functionalized with the specific aptamers to act as capture probes. Meanwhile, graphene oxide-Au nanostars (GO-Au NSs) decorated with Raman reporters and aptamers were used as SERS tags. The loading density of Au NSs on GO was tuned to change the number of SERS active sites. In this proposal, E. coli and S. aureus were first captured by capture probes and then bound with SERS tags to form a sandwich-like structure, which caused enhanced electromagnetic field because of the dual enhancement strategy. Under optimal conditions, SERS platform could detect E. coli and S. aureus simultaneously, and the detection limit was as low as 10 cfu/mL. Our sandwich assay-based dual-enhanced SERS platform provides a new idea for simultaneously detecting multiple pathogens with high selectivity and sensitivity, and thus will have more hopeful prospects in the field of food safety.

Advances in surface-enhanced Raman spectroscopy technology for detection of foodborne pathogens

Rapid control and prevention of diseases caused by foodborne pathogens is one of the existing food safety regulatory issues faced by various countries and has received wide attention from all sectors of society. The development of rapid and reliable detection methods for foodborne pathogens remains a hot research area for food safety and public health because of the limitations of complex steps, time-consuming, low sensitivity, or poor selectivity of commonly used methods. Surface-enhanced Raman spectroscopy (SERS), as a novel spectroscopic technique, has the advantages of high sensitivity, selectivity, rapid and nondestructive detection and has exhibited broad application prospects in the determination of pathogenic bacteria. In this study, the enhancement mechanisms of SERS are briefly introduced, then the characteristics and properties of liquid-phase, rigid solid-phase, and flexible solid-phase are categorized. Furthermore, a comprehensive review of the advances in label-free or label-based SERS strategies and SERS-compatible techniques for the detection of foodborne pathogens is provided, and the advantages and disadvantages of these methods are reviewed. Finally, the current challenges of SERS technology applied in practical applications are listed, and the possible development trends of SERS in the field of foodborne pathogens detection in the future are discussed.

MIPs-SERS Sensor Based on Ag NPs Film for Selective Detection of Enrofloxacin in Food

The quinolone antibiotics represented by enrofloxacin (ENRO) are harmful to the ecological environment and human health due to illegal excessive use, resulting in increasing food residues and ENRO levels in the environment. To this end, we developed a MIPs-SERS method using surface-enhanced Raman spectroscopy (SERS) and molecularly imprinted polymers (MIPs) to detect ENRO in food matrices. Firstly, a layer of silver nanoparticles (Ag NPs) with the best SERS effect was synthesized on the surface of copper rods as the enhancing material by in situ reductions, and then MIPs targeting ENRO were prepared by the native polymerization reaction, and the MIPs containing template molecules wrapped on the surface of silver nanoparticle films (Ag NPs-MIPs) were obtained. Our results showed that the Ag NPs-MIPs could specifically identify ENRO from the complex environment. The minimum detection limit for ENRO was 0.25 ng/mL, and the characteristic peak intensity of ENRO was linearly correlated to the concentration with a linear range of 0.001~0.1 μg/mL. The experimental results showed that in comparison to other detection methods, the rapid detection of ENRO in food matrices using Ag NPs-MIPs as the substrate is reliable and offers a cost-effective, time-saving, highly selective, and sensitive method for detecting ENRO residues in real food samples.

Implementing Vancomycin Population Pharmacokinetic Models: An App for Individualized Antibiotic Therapy in Critically Ill Patients

In individualized therapy, the Bayesian approach integrated with population pharmacokinetic models (PopPK) for predictions together with therapeutic drug monitoring (TDM) to maintain adequate objectives is useful to maximize the efficacy and minimize the probability of toxicity of vancomycin in critically ill patients. Although there are limitations to implementation, model-informed precision dosing (MIPD) is an approach to integrate these elements, which has the potential to optimize the TDM process and maximize the success of antibacterial therapy. The objective of this work was to present an app for individualized therapy and perform a validation of the implemented vancomycin PopPK models. A pragmatic approach was used for selecting the models of Llopis, Goti and Revilla for developing a Shiny app with R. Through ordinary differential equation (ODE)-based mixed effects models from the mlxR package, the app simulates the concentrations' behavior, estimates whether the model was simulated without variability and predicts whether the model was simulated with variability. Moreover, we evaluated the predictive performance with retrospective trough concentration data from patients admitted to the adult critical care unit. Although there were no significant differences in the performance of the estimates, the Llopis model showed better accuracy (mean 80.88%; SD 46.5%); however, it had greater bias (mean -34.47%, SD 63.38%) compared to the Revilla et al. (mean 10.61%, SD 66.37%) and Goti et al. (mean of 13.54%, SD 64.93%) models. With respect to the RMSE (root mean square error), the Llopis (mean of 10.69 mg/L, SD 12.23 mg/L) and Revilla models (mean of 10.65 mg/L, SD 12.81 mg/L) were comparable, and the lowest RMSE was found in the Goti model (mean 9.06 mg/L, SD 9 mg/L). Regarding the predictions, this behavior did not change, and the results varied relatively little. Although our results are satisfactory, the predictive performance in recent studies with vancomycin is heterogeneous, and although these three models have proven to be useful for clinical application, further research and adaptation of PopPK models is required, as well as implementation in the clinical practice of MIPD and TDM in real time.

Design of new hydrolyzed collagen-modified magnetic nanoparticles to capture pathogens

Enrichment and diagnosis tools for pathogens currently available are time consuming, thus the development of fast and highly sensitive alternatives is desirable. In this study, a novel approach was described that enables selective capture of bacteria expressing hydrolyzed collagen-binding adhesins with hydrolyzed collagen-coated magnetic nanoparticles (MNPs). This platform could be useful to shorten the time needed to confirm the presence of a bacterial infection. MNPs were synthesized by a simple two-step approach through a green co-precipitation method using water as solvent. These MNPs were specifically designed to interact with pathogenic bacteria by establishing a hydrolyzed collagen-adhesin linker. The bacterial capture efficacy of hydrolyzed collagen MNPs (H-Coll@MNPs) for bacteria expressing collagen binding adhesins was 1.3 times higher than that of arginine MNPs (Arg@MNPs), herein used as control. More importantly, after optimization of the MNP concentration and contact time, the H-Coll@MNPs were able to capture 95% of bacteria present in the samples. More importantly, the bacteria can be enriched within 30 min and the time for bacterial identification is effectively shortened in comparison to the "gold standard" in clinical diagnosis. These results suggest that H-Coll@MNPs can be used for the selective isolation of specific bacteria from mixed populations present, for example, in biological samples.

Magnetic Nanoseparation Technology for Efficient Control of Microorganisms and Toxins in Foods: A Review

Outbreaks of foodborne diseases mediated by food microorganisms and toxins remain one of the leading causes of disease and death worldwide. It not only poses a serious threat to human health and safety but also imposes a huge burden on health care and socioeconomics. Traditional methods for the removal and detection of pathogenic bacteria and toxins in various samples such as food and drinking water have certain limitations, requiring a rapid and sensitive strategy for the enrichment and separation of target analytes. Magnetic nanoparticles (MNPs) exhibit excellent performance in this field due to their fascinating properties. The strategy of combining biorecognition elements with MNPs can be used for fast and efficient enrichment and isolation of pathogens. In this review, we describe new trends and practical applications of magnetic nanoseparation technology in the detection of foodborne microorganisms and toxins. We mainly summarize the biochemical modification and functionalization methods of commonly used magnetic nanomaterial carriers and discuss the application of magnetic separation combined with other instrumental analysis techniques. Combined with various detection techniques, it will increase the efficiency of detection and identification of microorganisms and toxins in rapid assays.

Ag NP-filter paper based SERS sensor coupled with multivariate analysis for rapid identification of bacteria

Rapid and accurate identification of bacteria is essential to ensure food safety and prevent pathogenic bacterial infection. In this study, a highly efficient method was established for accurately identifying bacterial species by applying Ag NP-filter paper based Surface enhanced Raman spectroscopy (SERS) analysis and Partial Least Squares-Discriminant Analysis (PLS-DA) statistical methods. The flexible Ag NP filter paper substrate with high sensitivity and uniformity was prepared by a facile and low-cost silver mirror reaction at room temperature, which exhibited desirable SERS activity in bacteria detection. Furthermore, PLS-DA was successfully employed to distinguish SERS spectra from S. aureus CMCC 26003, E. faecalis ATCC29212 and L. monocytogenes ATCC 19115 with a sensitivity of 93.3-100%, specificity of 96.7-97%, and overall predicting accuracy of 95.8%. This exploratory study demonstrates that a Ag NP-filter paper based SERS sensor coupled with PLS-DA has great potential for rapid and effective detection and identification of bacteria.

Magnetothermal Control of Temperature-Sensitive Repressors in Superparamagnetic Iron Nanoparticle-Coated Bacillus subtilis

Superparamagnetic iron oxide nanoparticles (SPIONs) are used as contrast agents in magnetic resonance imaging (MRI) and magnetic particle imaging (MPI), and resulting images can be used to guide magnetothermal heating. Alternating magnetic fields (AMF) cause local temperature increases in regions with SPIONs, and we investigated the ability of magnetic hyperthermia to regulate temperature-sensitive repressors (TSRs) of bacterial transcription. The TSR, TlpA39, was derived from a Gram-negative bacterium and used here for thermal control of reporter gene expression in Gram-positive, Bacillus subtilis. In vitro heating of B. subtilis with TlpA39 controlling bacterial luciferase expression resulted in a 14.6-fold (12 hours; h) and 1.8-fold (1 h) increase in reporter transcripts with a 10.0-fold (12 h) and 12.1-fold (1 h) increase in bioluminescence. To develop magnetothermal control, B. subtilis cells were coated with three SPION variations. Electron microscopy coupled with energy dispersive X-ray spectroscopy revealed an external association with, and retention of, SPIONs on B. subtilis. Furthermore, using long duration AMF we demonstrated magnetothermal induction of the TSRs in SPION-coated B. subtilis with a maximum of 5.6-fold increases in bioluminescence. After intramuscular injections of SPION-coated B. subtilis, histology revealed that SPIONs remained in the same locations as the bacteria. For in vivo studies, 1 h of AMF is the maximum exposure due to anesthesia constraints. Both in vitro and in vivo, there was no change in bioluminescence after 1 h of AMF treatment. Pairing TSRs with magnetothermal energy using SPIONs for localized heating with AMF can lead to transcriptional control that expands options for targeted bacteriotherapies.

Rapid magnetic separation: An immunoassay platform for the SERS-based detection of subarachnoid hemorrhage biomarkers

The blood–brain barrier (BBB) is of vital importance to the progression and prognosis of subarachnoid hemorrhage (SAH). The construction of a simple, sensitive, and accurate detection assay for measuring the biomarkers associated with BBB injury is still an urgent need owing to the complex pathogenesis of SAH and low expression levels of pathological molecules. Herein, we introduced surface-enhanced Raman scattering (SERS) label-embedded Fe₃O₄@Au core-shell nanoparticles as ideal SERS sensors for quantitative double detection of MMP-9 and occludin in SAH patients. Meanwhile, utilizing the SERS signals to dynamically estimate MMP-9 and occludin concentration in the rat SAH model is the first application in exploring the relationship of pathological MMP-9 and occludin molecular levels with neurobehavioral score. This method warrants reliable detection toward MMP-9 and occludin with a wide recognition range and a low detection limit in blood samples. Furthermore, the results monitored by the SERS assay exactly matched with those obtained through a traditional enzyme-linked immunosorbent assay (ELISA). The aforementioned results demonstrated this novel biosensor strategy has extensive application prospects in the quantitative measurement of multiple types of biomolecules in body fluid samples.

New Insight into Assembled Fe3O4@PEI@Ag Structure as Acceptable Agent with Enzymatic and Photothermal Properties

Metal-based enzyme mimics are considered to be acceptable agents in terms of their biomedical and biological properties; among them, iron oxides (Fe₃O₄) are treated as basement in fabricating heterogeneous composites through variable valency integrations. In this work, we have established a facile approach for constructing Fe₃O₄@Ag composite through assembling Fe₃O₄ and Ag together via polyethyleneimine ethylenediamine (PEI) linkages. The obtained Fe₃O₄@PEI@Ag structure conveys several hundred nanometers (~150 nm). The absorption peak at 652 nm is utilized for confirming the peroxidase-like activity of Fe₃O₄@PEI@Ag structure by catalyzing 3,3′,5,5′-tetramethylbenzidine (TMB) in the presence of H₂O₂. The Michaelis–Menten parameters (K_m) of 1.192 mM and 0.302 mM show the higher catalytic activity and strong affinity toward H₂O₂ and TMB, respectively. The maximum velocity (V_max) value of 1.299 × 10⁻⁷ M∙s⁻¹ and 1.163 × 10⁻⁷ M∙s⁻¹ confirm the efficiency of Fe₃O₄@PEI@Ag structure. The biocompatibility illustrates almost 100% cell viability. Being treated as one simple colorimetric sensor, it shows relative selectivity and sensitivity toward the detection of glucose based on glucose oxidase. By using indocyanine green (ICG) molecule as an additional factor, a remarkable temperature elevation is observed in Fe₃O₄@PEI@Ag@ICG with increments of 21.6 °C, and the absorption peak is nearby 870 nm. This implies that the multifunctional Fe₃O₄@PEI@Ag structure could be an alternative substrate for formatting acceptable agents in biomedicine and biotechnology with enzymatic and photothermal properties.

Vancomycin-conjugated polydopamine-coated magnetic nanoparticles for molecular diagnostics of Gram-positive bacteria in whole blood

Background

Sepsis is caused mainly by infection in the blood with a broad range of bacterial species. It can be diagnosed by molecular diagnostics once compounds in the blood that interfere with molecular diagnostics are removed. However, this removal relies on ultracentrifugation. Immunomagnetic separation (IMS), which typically uses antibody-conjugated silica-coated magnetic nanoparticles (Ab-SiO₂-MNPs), has been widely applied to isolate specific pathogens in various types of samples, such as food and environmental samples. However, its direct use in blood samples containing bacteria is limited due to the aggregation of SiO₂-MNPs in the blood and inability to isolate multiple species of bacteria causing sepsis.

Results

In this study, we report the synthesis of vancomycin-conjugated polydopamine-coated (van-PDA-MNPs) enabling preconcentration of multiple bacterial species from blood without aggregation. The presence of PDA and van on MNPs was verified using transmission electron microscopy, X-ray photoelectron spectroscopy, and energy disruptive spectroscopy. Unlike van-SiO₂-MNPs, van-PDA-MNPs did not aggregate in the blood. Van-PDA-MNPs were able to preconcentrate several species of Gram-positive bacteria in the blood, lowering the limit of detection (LOD) to 10 colony forming units/mL by polymerase chain reaction (PCR) and quantitative PCR (qPCR). This is 10 times more sensitive than the LOD obtained by PCR and qPCR using van-SiO₂-MNPs.

Conclusion

These results suggest that PDA-MNPs can avoid aggregation in blood and be conjugated with receptors, thereby improving the sensitivity of molecular diagnostics of bacteria in blood samples.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01606-3.

Metal-Based Nanoparticles: Antibacterial Mechanisms and Biomedical Application

The growing increase in antibiotic-resistant bacteria has led to the search for new antibacterial agents capable of overcoming the resistance problem. In recent years, nanoparticles (NPs) have been increasingly used to target bacteria as an alternative to antibiotics. The most promising nanomaterials for biomedical applications are metal and metal oxide NPs, due to their intrinsic antibacterial activity. Although NPs show interesting antibacterial properties, the mechanisms underlying their action are still poorly understood, limiting their use in clinical applications. In this review, an overview of the mechanisms underlying the antibacterial activity of metal and metal oxide NPs will be provided, relating their efficacy to: (i) bacterial strain; (ii) higher microbial organizations (biofilm); (iii) and physico-chemical properties of NPs. In addition, bacterial resistance strategies will be also discussed to better evaluate the feasibility of the different treatments adopted in the clinical safety fields. Finally, a wide analysis on recent biomedical applications of metal and metal oxide NPs with antibacterial activity will be provided.

Application of Porous Polyetheretherketone Scaffold/ Vancomycin-Loaded Thermosensitive Hydrogel Composites for Antibacterial Therapy in Bone Repair

Polyetheretherketone (PEEK) has been widely used in bone repair, but it often fails due to bacterial infection. Herein, a high-strength porous polyetheretherketone scaffold (ps-PK) loaded with antibacterial drug-loaded hydrogel strategy is proposed. The prepared ps-PK possesses high porosity (30.8%-64.7%) and the compression modulus is between 0.4-0.98 GPa. The interconnected pore-type structure endows it with a drug loading capacity. Poly(_D,L -lactic acid-co-glycolic acid)-b-Poly(ethylene glycol)-b-Poly(_D,L -lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) thermoresponsive hydrogels loaded with vancomycin are used as the drug sustained-release system. The vancomycin-loaded hydrogels in the solution state at a low temperature were filled into a porous polyetheretherketone scaffold (ps-PK-VGel) and formed a gel state after implantation in vivo. The antibacterial rate of ps-PK-VGel against methicillin-resistant staphylococcus aureus (MRSA) in vitro was 99.7% and histological observation in vivo demonstrates that the ps-PK-VGel shows obvious antibacterial activity. Given its excellent antibacterial ability and mechanical properties, the porous PEEK scaffold composite drug-loaded thermosensitive hydrogel has great potential in bone repair surgery applications. This article is protected by copyright. All rights reserved.

Synthesis of a Two-Dimensional Molybdenum Disulfide Nanosheet and Ultrasensitive Trapping of Staphylococcus Aureus for Enhanced Photothermal and Antibacterial Wound-Healing Therapy

Photothermal therapy has been widely used in the treatment of bacterial infections. However, the short photothermal effective radius of conventional nano-photothermal agents makes it difficult to achieve effective photothermal antibacterial activity. Therefore, improving composite targeting can significantly inhibit bacterial growth. We inhibited the growth of Staphylococcus aureus (S. aureus) by using an extremely low concentration of vancomycin (Van) and applied photothermal therapy with molybdenum disulfide (MoS₂). This simple method used chitosan (CS) to synthesize fluorescein 5(6)-isothiocyanate (FITC)-labeled and Van-loaded MoS₂-nanosheet hydrogels (MoS₂-Van-FITC@CS). After modifying the surface, an extremely low concentration of Van could inhibit bacterial growth by trapping bacteria synergistically with the photothermal effects of MoS₂, while FITC labeled bacteria and chitosan hydrogels promoted wound healing. The results showed that MoS₂-Van-FITC@CS nanosheets had a thickness of approximately 30 nm, indicating the successful synthesis of the nanosheets. The vitro antibacterial results showed that MoS₂-Van-FITC with near-infrared irradiation significantly inhibited S. aureus growth, reaching an inhibition rate of 94.5% at nanoparticle concentrations of up to 100 µg/mL. Furthermore, MoS₂-Van-FITC@CS could exert a healing effect on wounds in mice. Our results demonstrate that MoS₂-Van-FITC@CS is biocompatible and can be used as a wound-healing agent.

Highly potent multivalent VHH antibodies against Chikungunya isolated from an alpaca naïve phage display library

Background

Chikungunya virus (CHIKV) is a re-emerged mosquito-borne alphavirus that can cause musculoskeletal diseases, imposing a substantial threat to public health globally. High-affinity antibodies are need for diagnosis and treatment of CHIKV infections. As a potential diagnostic and therapeutic agent, the multivalent VHH antibodies is a promising tookit in nanomedicine. Here, we developed potent multivalent VHH antibodies from an alpaca naïve phage display library targeting the E2 glycoprotein of the CHIKV virus.

Results

In the present study, we generated 20 VHH antibodies using a naïve phage display library for binders to the CHIKV E2 glycoprotein. Of these, multivalent VHH antibodies Nb-2E8 and Nb-3C5 had specific high-affinity binding to E2 protein within the nanomolar range. The equilibrium dissociation constant (KD) was between 2.59–20.7 nM, which was 100-fold stronger than the monovalent antibodies’ affinity. Moreover, epitope mapping showed that Nb-2E8 and Nb-3C5 recognized different linear epitopes located on the E2 glycoprotein domain C and A, respectively. A facile protocol of sandwich ELISA was established using BiNb-2E8 as a capture antibody and HRP-conjugated BiNb-3C5 as a detection antibody. A good linear correlation was achieved between the OD₄₅₀ value and the E2 protein concentration in the 5–1000 ng/mL range (r = 0.9864, P < 0.0001), indicating its potential for quantitative detection of the E2 protein.

Conclusions

Compared to monovalent antibodies, multivalent VHH antibodies Nb-2E8 and Nb-3C5 showed high affinity and are potential candidates for diagnostic applications to better detect CHIKV virions in sera.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-022-01417-6.

Biomolecules capturing live bacteria from clinical samples

Rapid phenotypic antimicrobial susceptibility testing (AST) requires the enrichment of live bacteria from patient samples, which is particularly challenging in the context of life-threatening bloodstream infections (BSIs) due to low bacterial titers. Over two decades, an extensive array of pathogen-specific biomolecules has been identified to capture live bacteria. The prevailing biomolecules are immune proteins of the complement system, antibodies, aptamers, phage proteins, and antimicrobial peptides. These biomolecules differ by their binder generation technologies and exhibit highly variable specificities, ranging from bacterial strains to most pathogenic bacteria. Here, we summarize how these diverse biomolecules were identified, list examples of successfully reported capture assays, and provide an outlook on the use of nanobodies raised against conserved surface-accessible proteins as promising biomolecules for pathogen capture.

Bio-Receptors Functionalized Nanoparticles: A Resourceful Sensing and Colorimetric Detection Tool for Pathogenic Bacteria and Microbial Biomolecules

Pathogenic bacteria and several biomolecules produced by cells and living organisms are common biological components posing a harmful threat to global health. Several studies have devised methods for the detection of varying pathogenic bacteria and biomolecules in different settings such as food, water, soil, among others. Some of the detection studies highlighting target pathogenic bacteria and biomolecules, mechanisms of detection, colorimetric outputs, and detection limits have been summarized in this review. In the last 2 decades, studies have harnessed various nanotechnology-based methods for the detection of pathogenic bacteria and biomolecules with much attention on functionalization techniques. This review considers the detection mechanisms, colorimetric prowess of bio-receptors and compares the reported detection efficiency for some bio-receptor functionalized nanoparticles. Some studies reported visual, rapid, and high-intensity colorimetric detection of pathogenic bacteria and biomolecules at a very low concentration of the analyte. Other studies reported slight colorimetric detection only with a large concentration of an analyte. The effectiveness of bio-receptor functionalized nanoparticles as detection component varies depending on their selectivity, specificity, and the binding interaction exhibited by nanoparticles, bio-receptor, and analytes to form a bio-sensing complex. It is however important to note that the colorimetric properties of some bio-receptor functionalized nanoparticles have shown strong and brilliant potential for real-time and visual-aided diagnostic results, not only to assess food and water quality but also for environmental monitoring of pathogenic bacteria and a wide array of biomolecules.

Gold nanoparticle-based optical nanosensors for food and health safety monitoring: recent advances and future perspectives

Modern society has been facing serious health-related problems including food safety, diseases and illness. Hence, it is urgent to develop analysis methods for the detection and control of food contaminants, disease biomarkers and pathogens. As the traditional instrumental methods have several disadvantages, including being time consuming, and having high cost and laborious procedures, optical nanosensors have emerged as promising alternative or complementary approaches to those traditional ones. With the advantages of simple preparation, high surface-to-volume ratio, excellent biocompatibility, and especially, unique optical properties, gold nanoparticles (AuNPs) have been demonstrated as excellent transducers for optical sensing systems. Herein, we provide an overview of the synthesis of AuNPs and their excellent optical properties that are ideal for the development of optical nanosensors based on local surface plasmon resonance (LSPR), colorimetry, fluorescence resonance energy transfer (FRET), and surface-enhanced Raman scattering (SERS) phenomena. We also review the sensing strategies and their mechanisms, as well as summarizing the recent advances in the monitoring of food contaminants, disease biomarkers and pathogens using developed AuNP-based optical nanosensors in the past seven years (2015-now). Furthermore, trends and challenges in the application of these nanosensors in the determination of those analytes are discussed to suggest possible directions for future developments.

A 3D-ACEK/SERS system for highly efficient and selectable electrokinetic bacteria concentration/detection/ antibiotic-susceptibility-test on whole blood

This study demonstrates a novel multi-functional microfluidic system, designated three dimensional Alternative Current Electrokinetic/Surface Enhanced Raman Scattering (3D-ACEK/SERS), which can concentrate bacteria from whole blood, identify bacterial species, and determine antibiotic susceptibilities of the bacteria rapidly. The system consists of a hybrid electrokinetic mechanism, integrating AC-electroosmosis (AC-EO) and dielectrophoresis (DEP) that allows thousand-fold concentration of bacteria, including S. aureus, Escherichia coli, and Chryseobacterium indologenes, in the center of an electrode with a wide range of working distance (hundreds to thousands of μm), while exclusion of blood cells through negative DEP forces. This microchip employs SERS assay to determine the identity of the concentrated bacteria in approximately 2 min with a limit of detection of 3 CFU/ml, 5 orders of magnitude lower than that using standard centrifugation-purification process. Finally, label-free antibiotic susceptibility testing has been successfully demonstrated on the platform using both antibiotic-sensitive and multidrug-resistant bacterial strains illustrating a potential utility of the system to clinical applications.

Fluorescence detection of Staphylococcus aureus using vancomycin functionalized magnetic beads combined with rolling circle amplification in fruit juice

Staphylococcus aureus is a common foodborne pathogen that can cause a suppurative infection after eating contaminated food. Detection of S. aureus plays an important role in the food industry. In this study, a strategy for the detection of S. aureus using magnetic separation (MS) technology combined with rolling circle amplification (MS-RCA) was proposed. The strategy used antibiotics to capture bacteria and employed RCA products as signal output probes. Vancomycin (Van), as a commonly used antibiotic, can recognize peptidoglycan on the cell wall of Gram-positive bacteria and can effectively identify target bacteria. Therefore, we prepared BSAylated-Van functionalized magnetic beads (Van-MBs) for the pre-enrichment of S. aureus. To ensure the selectivity of this method, we used biotin-pig IgG to bind S. aureus. In addition, to amplify the output signal of the MS-RCA strategy, we introduced streptavidin (SA) and successfully obtained the Van-MBs@S. aureus@biotin-pig IgG@SA@biotin-RCA probe complex and used the biotin-avidin-system (BAS) by combining magnetic separation technology and RCA technology to realize the enrichment and specific detection of S. aureus. Furthermore, by optimizing the experimental conditions such as the magnetic separation time and the amount of Van-MBs, the detection performance of this method was improved. Under the optimal conditions, the detection limit of this method for S. aureus was 3.3 × 10² CFU/mL in fruit juice, and it was less affected by other bacteria.

Recent advances in antibiotic resistance diagnosis using SERS: focus on the “Big 5” challenges

SERS for antibiotic resistance diagnosis.

Antimicrobial peptide-based materials: opportunities and challenges

The multifunctional properties of antimicrobial peptides (AMPs) make them attractive candidates for the treatment of various diseases. AMPs are considered alternatives to antibiotics due to the rising number of multidrug-resistant...

Vancomycin-Loaded Polycaprolactone Electrospinning Nanofibers Modulate the Airway Interfaces to Restrain Tracheal Stenosis

Site-specific release of therapeutics at the infected trachea remains a great challenge in clinic. This work aimed to develop a series of vancomycin (VA)-loaded polycaprolactone (PCL) composite nanofiber films (PVNF-n, n = 0, 1, and 5, respectively) via the electrospinning technique. The physiochemical and biological properties of PVNF-n were evaluated by a series of tests, such as FT-IR, XRD, SEM-EDS, and antibacterial assay. The PVNF-n samples displayed a typical network structure of fibers with random directions. VA was successfully introduced into the PCL nanofibers and could be sustained and released. More importantly, PVNF-5 showed relatively good antibacterial activity against both methicillin-resistant Staphylococcus aureus (MRSA) and Streptococcus pneumoniae (SPn). Thus, PVNF-5 was covered onto the self-expandable metallic stent and then implanted into a New Zealand rabbit model to repair tracheal stenosis. Compared to a metallic stent, a commercial pellosil matrix–covered stent, and a PVNF-0–covered metallic stent, the PVNF-5–covered airway stent showed reduced granulation tissue thickness, collagen density, α-SMA, CD68, TNF-α, IL-1, and IL-6 expression. In conclusion, this work provides an anti-infection film–covered airway stent that in site restrains tracheal stenosis.

Novel Biorecognition Elements against Pathogens in the Design of State-of-the-Art Diagnostics

Infectious agents, especially bacteria and viruses, account for a vast number of hospitalisations and mortality worldwide. Providing effective and timely diagnostics for the multiplicity of infectious diseases is challenging. Conventional diagnostic solutions, although technologically advanced, are highly complex and often inaccessible in resource-limited settings. An alternative strategy involves convenient rapid diagnostics which can be easily administered at the point-of-care (POC) and at low cost without sacrificing reliability. Biosensors and other rapid POC diagnostic tools which require biorecognition elements to precisely identify the causative pathogen are being developed. The effectiveness of these devices is highly dependent on their biorecognition capabilities. Naturally occurring biorecognition elements include antibodies, bacteriophages and enzymes. Recently, modified molecules such as DNAzymes, peptide nucleic acids and molecules which suffer a selective screening like aptamers and peptides are gaining interest for their biorecognition capabilities and other advantages over purely natural ones, such as robustness and lower production costs. Antimicrobials with a broad-spectrum activity against pathogens, such as antibiotics, are also used in dual diagnostic and therapeutic strategies. Other successful pathogen identification strategies use chemical ligands, molecularly imprinted polymers and Clustered Regularly Interspaced Short Palindromic Repeats-associated nuclease. Herein, the latest developments regarding biorecognition elements and strategies to use them in the design of new biosensors for pathogens detection are reviewed.

Rapid SERS identification of methicillin-susceptible and methicillin-resistant Staphylococcus aureus via aptamer recognition and deep learning

Here, we report a label-free surface-enhanced Raman scattering (SERS) method for the rapid and accurate identification of methicillin-susceptible Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA) based on aptamer-guided AgNP enhancement and convolutional neural network (CNN) classification. Sixty clinical isolates of Staphylococcus aureus (S. aureus), comprising 30 strains of MSSA and 30 strains of MRSA were used to build the CNN classification model. The developed method exhibited 100% identification accuracy for MSSA and MRSA, and is thus a promising tool for the rapid detection of drug-sensitive and drug-resistant bacterial strains.

Nanomedicine as a promising strategy for the theranostics of infectious diseases

Infectious diseases caused by bacteria, viruses, and fungi and their global spread pose a great threat to human health. The 2019 World Health Organization report predicted that infection-related mortality will be similar to cancer mortality by 2050. Particularly, the global cumulative numbers of the recent outbreak of coronavirus disease (COVID-19) have reached 110.7 million cases and over 2.4 million deaths as of February 23, 2021. Moreover, the crisis of these infectious diseases exposes the many problems of traditional diagnosis, treatment, and prevention, such as time-consuming and unselective detection methods, the emergence of drug-resistant bacteria, serious side effects, and poor drug delivery. There is an urgent need for rapid and sensitive diagnosis as well as high efficacy and low toxicity treatments. The emergence of nanomedicine has provided a promising strategy to greatly enhance detection methods and drug treatment efficacy. Owing to their unique optical, magnetic, and electrical properties, nanoparticles (NPs) have great potential for the fast and selective detection of bacteria, viruses, and fungi. NPs exhibit remarkable antibacterial activity by releasing reactive oxygen species and metal ions, exerting photothermal effects, and causing destruction of the cell membrane. Nano-based delivery systems can further improve drug permeability, reduce the side effects of drugs, and prolong systemic circulation time and drug half-life. Moreover, effective drugs against COVID-19 are still lacking. Recently, nanomedicine has shown great potential to accelerate the development of safe and novel anti-COVID-19 drugs. This article reviews the fundamental mechanisms and the latest developments in the treatment and diagnosis of bacteria, viruses, and fungi and discusses the challenges and perspectives in the application of nanomedicine.

Nanomaterial application in bio/sensors for the detection of infectious diseases

Infectious diseases are a potential risk for public health and the global economy. Fast and accurate detection of the pathogens that cause these infections is important to avoid the transmission of the diseases. Conventional methods for the detection of these microorganisms are time-consuming, costly, and not applicable for on-site monitoring. Biosensors can provide a fast, reliable, and point of care diagnostic. Nanomaterials, due to their outstanding electrical, chemical, and optical features, have become key players in the area of biosensors. This review will cover different nanomaterials that employed in electrochemical, optical, and instrumental biosensors for infectious disease diagnosis and how these contributed to enhancing the sensitivity and rapidity of the various sensing platforms. Examples of nanomaterial synthesis methods as well as a comprehensive description of their properties are explained. Moreover, when available, comparative data, in the presence and absence of the nanomaterials, have been reported to further highlight how the usage of nanomaterials enhances the performances of the sensor.

Recent advancement in nano-optical strategies for detection of pathogenic bacteria and their metabolites in food safety

Pathogenic bacteria and their metabolites are the leading risk factor in food safety and are one of the major threats to human health because of the capability of triggering diseases with high morbidity and mortality. Nano-optical sensors for bacteria sensing have been greatly explored with the emergence of nanotechnology and artificial intelligence. In addition, with the rapid development of cross fusion technology, other technologies integrated nano-optical sensors show great potential in bacterial and their metabolites sensing. This review focus on nano-optical strategies for bacteria and their metabolites sensing in the field of food safety; based on surface-enhanced Raman scattering (SERS), fluorescence, and colorimetric biosensors, and their integration with the microfluidic platform, electrochemical platform, and nucleic acid amplification platform in the recent three years. Compared with the traditional techniques, nano optical-based sensors have greatly improved the sensitivity with reduced detection time and cost. However, challenges remain for the simple fabrication of biosensors and their practical application in complex matrices. Thus, bringing out improvements or novelty in the pretreatment methods will be a trend in the upcoming future.

Recent progress in the optical detection of pathogenic bacteria based on noble metal nanoparticles

Pathogenic bacteria have become a huge threat to social health and economy for their frighteningly infectious and lethal capacity. It is quite important to make a diagnosis in advance to prevent infection or allow a rapid treatment after infection. Noble metal nanoparticles, due to their unique physicochemical properties, especially optical properties, have drawn a great attention during the past decades and have been widely applied into all kinds of fields related to human health. By utilizing these noble metal nanoparticles, optical diagnosis platforms towards pathogenic bacteria have emerged continually, providing highly sensitive, selective, and particularly facile detection tools for clinic or point-of-care diagnosis. This review summarizes the recent development in this field. It begins with a brief introduction of pathogenic bacteria and noble metal nanoparticles. And then, optical detection methods are systematically discussed in three distinct aspects. In addition to these proof-of-concept methods, corresponding algorithms and point-of-care detection devices are also described. Finally, the review ends up with subjective views on present limitations and some appropriate advice for future research directions.

Recent Advances in (Bio)Chemical Sensors for Food Safety and Quality Based on Silver Nanomaterials

There is a continuing need for tools and devices which can simplify, quicken and reduce the cost of analyses of food safety and quality. Chemical sensors and biosensors are increasingly being developed for this purpose, reaping from the opportunities provided by nanotechnology. Due to the distinct electrical and optical properties of silver nanoparticles (AgNPs), this material plays a vital role in (bio)sensor development. This review is an analysis of chemical sensors and biosensors based on silver nanoparticles with application in food and beverage matrices. It consists of academic research published from 2015 to 2020. The paper is structured to separately explore the designs of two major (bio)sensor classes: electrochemical (including voltammetric and impedimetric sensors) and optical sensors (including colourimetric and luminescent), with special focus on the type of silver nanomaterial and its role in the sensor system. The review indicates that diverse nanosensors have been developed, capable of detecting analytes such as pesticides, mycotoxins, fertilisers, microorganisms, heavy metals, and various additives with exceptional analytical performance. Current trends in the design of such sensors are highlighted and challenges which need to be overcome in the future are discussed.

Surface-enhanced Raman spectroscopy method for classification of doxycycline hydrochloride and tylosin in duck meat using gold nanoparticles

This paper investigated on 478 duck meat samples for the identification of 2 kinds of antibiotics, that is, doxycycline hydrochloride and tylosin, that were classified based on surface-enhanced Raman spectroscopy (SERS) combined with multivariate techniques. The optimal detection parameters, including the effects of the adsorption time, and 2 enhancement substrates (i.e., gold nanoparticles as well as gold nanoparticles and NaCl) on Raman intensities, were analyzed using single factor analysis method. The results showed that the optimal adsorption time between gold nanoparticles and analytes was 2 min, and the colloidal gold nanoparticles without NaCl as the active substrate were more conducive to enhance the Raman spectra signal. The SERS data were pretreated by using the method of adaptive iterative penalty least square method (air-PLS) and second derivative, and from which the feature vectors were extracted with the help of principal component analysis. The first four principal components scores were selected as the input values of support vector machines model. The overall classification accuracy of the test set was 100%. The experimental results showed that the combination of SERS and multivariate analysis could identify the residues of doxycycline hydrochloride and tylosin in duck meat quickly and sensitively.

Sensitive detection of S. Aureus using aptamer- and vancomycin -copper nanoclusters as dual recognition strategy

The proposed aptamer- and antibiotic-based dual detection sensor, combines copper nanoclusters (CuNCs) as an effective approach for the recognition and quantification of Staphylococcus aureus (S. aureus) as a pathogenic bacteria. A facile method for CuNCs based on vancomycin as the template using a fluorescence platform was proposed for the recognition of the S. aureus whole cells via antibiotic and aptamer. Using dual receptor functionalized CuNCs linked to vancomycin and a specific aptamer and during aggregation induce emission process enhanced fluorescence signal linearly with S. aureus concentrations between 10²-10⁸ CFU/mL, and the detection limit was 80 CFU/mL after 45 min as the optimum incubation time. Non-target bacteria generated negative results, proving the high specificity of the presented sensor. This strategy showed recoveries ranging 86%-98% in milk as real sample and can be used for the development of universal detection platforms for efficient and specific S. aureus detection with great potential applications for monitoring pathogenic bacteria.

Recent Innovations in Bacterial Infection Detection and Treatment

Bacterial infections are a major threat to human health, exacerbated by increasing antibiotic resistance. These infections can result in tremendous morbidity and mortality, emphasizing the need to identify and treat pathogenic bacteria quickly and effectively. Recent developments in detection methods have focused on electrochemical, optical, and mass-based biosensors. Advances in these systems include implementing multifunctional materials, microfluidic sampling, and portable data-processing to improve sensitivity, specificity, and ease of operation. Concurrently, advances in antibacterial treatment have largely focused on targeted and responsive delivery for both antibiotics and antibiotic alternatives. Antibiotic alternatives described here include repurposed drugs, antimicrobial peptides and polymers, nucleic acids, small molecules, living systems, and bacteriophages. Finally, closed-loop therapies are combining advances in the fields of both detection and treatment. This review provides a comprehensive summary of the current trends in detection and treatment systems for bacterial infections.

Dual-signal lateral flow assay using vancomycin-modified nanotags for rapid and sensitive detection of Staphylococcus aureus

This paper reports a colorimetric-fluorescent dual-signal lateral flow assay (LFA) based on vancomycin (Van)-modified SiO2-Au-QD tags for sensitive and quantitative detection of Staphylococcus aureus (S. aureus). The combination of high-performance Van-tags and detection antibodies integrated into the LFA system produced assays with high sensitivity and specificity. The visualization limit of the colorimetric signal and the detection limit of the fluorescence signal of the proposed method for S. aureus can reach 104 and 100 cells mL-1, respectively.

Rapid Detection Method for Pathogenic Candida Captured by Magnetic Nanoparticles and Identified Using SERS via AgNPs. Int J Nanomedicine 2021;16:941-950. [PMID: 33603361 PMCID: PMC7884937 DOI: 10.2147/ijn.s285339]

Purpose

Candidemia infection is common in the clinic and has a high mortality rate. Candida albicans, Candida tropicalis, and Candida krusei are very important and common pathogenic species. Candida is difficult to isolate from clinical samples and culture, and immunological detection cannot distinguish these related strains. Furthermore, Candida has a complex cell wall, which causes difficulties in the extraction of DNA for nucleic acid detection. The purpose of this study was to establish a protocol for the direct identification of Candida from serum.

Materials and Methods

We synthesized Fe₃O₄@PEI (where PEI stands for polyethylenimine) magnetic nanoparticles to capture Candida and prepared positively charged silver nanoparticles (AgNPs⁺) as the substrate for surface-enhanced Raman scattering (SERS). Candida was directly identified from serum by SERS detection.

Results

Orthogonal partial least squares discriminant analysis (OPLS-DA) was used as the multivariate analysis tool. Principal component analysis confirmed that this method can clearly distinguish common Candida. After 10-fold cross-validation, the accuracy of training data in this model was 100% and the accuracy of test data was 99.8%, indicating that the model has good classification ability.

Conclusion

The detection could be completed within 40 minutes using Fe₃O₄@PEI and AgNPs⁺ prepared in advance. This is the first time that Fe₃O₄@PEI was used in the detection of Candida by SERS. We report the first rapid method to identify fungi directly from serum without breaking the cell wall to extract DNA from the fungi.

Recent advances in dual recognition based surface enhanced Raman scattering for pathogenic bacteria detection: A review

Rapid and reliable detection of pathogenic bacteria at the early stage represents a highly topical research area for food safety and public health. Although culture based method is the gold standard method for bacteria detection, recent techniques have promoted the development of alternative methods, such as surface enhanced Raman scattering (SERS). SERS provides additional advantages of high speed, simultaneous detection and characterization, multiplex analysis, and comparatively low cost. However, conventional SERS methods for bacteria detection are facing limitations of low sensitivity, susceptible to matrix interference, and poor accuracy. In recent years, specific detection of pathogenic bacteria with dual recognition based SERS methods has attracted increasing attentions. These methods include two steps recognition of target bacteria, and integrate the functions of target separation and detection. Considering their merits of excellent specificity, ultrahigh sensitivity, multiplex detection capability, and potential for on-site applications, these methods are promising alternatives for rapid and reliable detection of pathogenic bacteria. Herein, this review aims to summarize the recent advances in dual recognition based SERS methods for specific detection of pathogenic bacteria. Their advantages and limitations are discussed, and further perspectives are tentatively given. This review provides new insights into the application of SERS as a reliable tool for pathogenic bacteria detection.

Combining vancomycin-modified gold nanorod arrays and colloidal nanoparticles as a sandwich model for the discrimination of Gram-positive bacteria and their detection via surface-enhanced Raman spectroscopy (SERS)

This study reports the development of a highly sensitive antibiotic-based discrimination and sensor platform for the detection of Gram-positive bacteria through surface-enhanced Raman spectroscopy (SERS).

Extracellular matrix scaffold crosslinked with vancomycin for multifunctional antibacterial bone infection therapy

The treatment of acute and chronic bone infections remains a major clinical challenge. The various factors released by the bacteria, acidic environment, and bacterial colonies in the bone grooves and implanted synthetic materials collectively promote the formation of biofilms. Dormant bacteria and biofilms cause infections that are difficult to cure and that can develop chronically. Therefore, a new antibacterial material was synthesized in the present study for multifunctional bone infection therapy and consists of specific demineralized extracellular cancellous bone (SDECM) crosslinked with vancomycin (Van) by means of electrostatic interactions and chemical bonds. It was verified in vitro that the new material (Van-SDECM) not only has pH-sensitive release and biofilm inhibition properties, but also maintains sustained bactericidal ability accompanied by the degradation of the scaffold, which does not affect its favorable osteogenic performance. The infectious bone defect in vivo model further confirms the comprehensive anti-infective and osteogenic ability of the Van-SDECM. Further, these favorable properties are due to the pH-sensitive sustained release sterilization and scaffold contact antibacterial properties, accompanied by osteoclast activity inhibition, osteogenesis promotion and immunoregulation effects. This study provides a new drug-scaffold composite preparation method based on a native-derived extracellular matrix scaffold.