Controlled drug delivery by biodegradable poly(ester) devices: different preparative approaches

Targeted drug-loaded PLGA-PCL microspheres for specific and localized treatment of triple negative breast cancer

The paper presents the results of the experimental and analytical study of targeted drug-loaded polymer-based microspheres made from blend polymer of polylactic-co-glycolic acid and polycaprolactone (PLGA-PCL) for targeted and localized cancer drug delivery. In vitro sustained release with detailed thermodynamically driven drug release kinetics, over a period of three months using encapsulated targeted drugs (prodigiosin-EphA2 or paclitaxel-EphA2) and control drugs [Prodigiosin (PGS), and paclitaxel (PTX)] were studied. Results from in vitro study showed a sustained and localized drug release that is well-characterized by non-Fickian Korsmeyer-Peppas kinetics model over the range of temperatures of 37 °C (body temperature), 41 °C, and 44 °C (hyperthermic temperatures). The in vitro alamar blue, and flow cytometry assays in the presence of the different drug-loaded polymer formulations resulted to cell death and cytotoxicity that was evidence through cell inhibition and late apoptosis on triple negative breast cancer (TNBC) cells (MDA-MB 231). In vivo studies carried out on groups of 4-week-old athymic nude mice that were induced with subcutaneous TNBC, showed that the localized release of the EphA2-conjugated drugs was effective in complete elimination of residual tumor after local surgical resection. Finally, ex vivo histopathological analysis carried out on the euthanized mice revealed no cytotoxicity and absence of breast cancer metastases in the liver, kidney, and lungs 12 weeks after treatment. The implications of the results are then discussed for the development of encapsulated EphA2-conjugated drugs formulation in the specific targeting, localized, and sustain drug release for the elimination of local recurred TNBC tumors after surgical resection.

The Management of Parkinson's Disease: An Overview of the Current Advancements in Drug Delivery Systems

Parkinson's disease (PD) has significantly affected a large proportion of the elderly population worldwide. According to the World Health Organization, approximately 8.5 million people worldwide are living with PD. In the United States, an estimated one million people are living with PD, with approximately 60,000 new cases diagnosed every year. Conventional therapies available for Parkinson's disease are associated with limitations such as the wearing-off effect, on-off period, episodes of motor freezing, and dyskinesia. In this review, a comprehensive overview of the latest advances in DDSs used to reduce the limitations of current therapies will be presented, and both their promising features and drawbacks will be discussed. We are also particularly interested in the technical properties, mechanism, and release patterns of incorporated drugs, as well as nanoscale delivery strategies to overcome the blood-brain barrier.

The Advancement of Biodegradable Polyesters as Delivery Systems for Camptothecin and Its Analogues-A Status Report

Camptothecin (CPT) has demonstrated antitumor activity in lung, ovarian, breast, pancreas, and stomach cancers. However, this drug, like many other potent anticancer agents, is extremely water-insoluble. Furthermore, pharmacology studies have revealed that prolonged schedules must be administered continuously. For these reasons, several of its water-soluble analogues, prodrugs, and macromolecular conjugates have been synthesized, and various formulation approaches have been investigated. Biodegradable polyesters have gained popularity in cancer treatment in recent years. A number of biodegradable polymeric drug delivery systems (DDSs), designed for localized and systemic administration of therapeutic agents, as well as tumor-targeting macromolecules, have entered clinical trials, demonstrating the importance of biodegradable polyesters in cancer therapy. Biodegradable polyester-based DDSs have the potential to deliver the payload to the target while also increasing drug availability at intended site. The systemic toxicity and serious side-effects associated with conventional cancer therapies can be significantly reduced with targeted polymeric systems. This review elaborates on the use of biodegradable polyesters in the delivery of CPT and its analogues. The design of various DDSs based on biodegradable polyesters has been described, with the drug either adsorbed on the polymer's surface or encapsulated within its macrostructure, as well as those in which a hydrolyzed chemical bond is formed between the active substance and the polymer chain. The data related to the type of DDSs, the kind of linkage, and the details of in vitro and in vivo studies are included.

Emerging uses of PLA-PEG copolymer in cancer drug delivery

Traditional therapies need high systematic dosages that not only destroys cancerous cells but also healthy cells. To overcome this problem recent advancement in nanotechnology specifically in nanomaterials has been extensively done for various biological applications, such as targeted drug delivery. Nanotechnology, as a frontier science, has the potential to break down all the obstacles to be more effective and secure drug delivery system. It is possible to develop nanopolymer based drug carrier that can target drugs with extreme accuracy. Polymers can advance drug delivery technologies by allowing controlled release of therapeutic drugs in stable amounts over long duration of time. For controlled drug delivery, biodegradable synthetic polymers have various benefits over non-biodegradable polymers. Biodegradable polymer either are less toxic or non-toxic. Polylactic Acid (PLA) is one of the most remarkable amphipathic polymers which make it one of the most suitable materials for polymeric micelles. Amphiphilic nanomaterial, such as Polyethylene Glycol (PEG), is one of the most promising carrier for tumor targeting. PLA-PEG as a copolymer has been generally utilized as drug delivery system for the various types of cancer. Chemotherapeutic drugs are stacked into PLA-PEG copolymer and as a result their duration time delays, hence medications arrive at specific tumor site.

Journey to the Market: The Evolution of Biodegradable Drug Delivery Systems

Biodegradable polymers have been used as carriers in drug delivery systems for more than four decades. Early work used crude natural materials for particle fabrication, whereas more recent work has utilized synthetic polymers. Applications include the macroscale, the microscale, and the nanoscale. Since pioneering work in the 1960’s, an array of products that use biodegradable polymers to encapsulate the desired drug payload have been approved for human use by international regulatory agencies. The commercial success of these products has led to further research in the field aimed at bringing forward new formulation types for improved delivery of various small molecule and biologic drugs. Here, we review recent advances in the development of these materials and we provide insight on their drug delivery application. We also address payload encapsulation and drug release mechanisms from biodegradable formulations and their application in approved therapeutic products.

Integrating plant molecular farming and materials research for next-generation vaccines

Biologics - medications derived from a biological source - are increasingly used as pharmaceuticals, for example, as vaccines. Biologics are usually produced in bacterial, mammalian or insect cells. Alternatively, plant molecular farming, that is, the manufacture of biologics in plant cells, transgenic plants and algae, offers a cheaper and easily adaptable strategy for the production of biologics, in particular, in low-resource settings. In this Review, we discuss current vaccination challenges, such as cold chain requirements, and highlight how plant molecular farming in combination with advanced materials can be applied to address these challenges. The production of plant viruses and virus-based nanotechnologies in plants enables low-cost and regional fabrication of thermostable vaccines. We also highlight key new vaccine delivery technologies, including microneedle patches and material platforms for intranasal and oral delivery. Finally, we provide an outlook of future possibilities for plant molecular farming of next-generation vaccines and biologics.

Integrating plant molecular farming and materials research for next-generation vaccines

Biologics - medications derived from a biological source - are increasingly used as pharmaceuticals, for example, as vaccines. Biologics are usually produced in bacterial, mammalian or insect cells. Alternatively, plant molecular farming, that is, the manufacture of biologics in plant cells, transgenic plants and algae, offers a cheaper and easily adaptable strategy for the production of biologics, in particular, in low-resource settings. In this Review, we discuss current vaccination challenges, such as cold chain requirements, and highlight how plant molecular farming in combination with advanced materials can be applied to address these challenges. The production of plant viruses and virus-based nanotechnologies in plants enables low-cost and regional fabrication of thermostable vaccines. We also highlight key new vaccine delivery technologies, including microneedle patches and material platforms for intranasal and oral delivery. Finally, we provide an outlook of future possibilities for plant molecular farming of next-generation vaccines and biologics.

Polymeric Composite Matrix with High Biobased Content as Pharmaceutically Relevant Molecular Encapsulation and Release Platform

Drug delivery systems (DDS) that can temporally control the rate and extent of release of therapeutically active molecules find applications in many clinical settings, ranging from infection control to cancer therapy. With an aim to design a locally implantable, controlled-release DDS, we demonstrated the feasibility of using cellulose nanocrystal (CNC)-reinforced poly (l-lactic acid) (PLA) composite beads. The performance of the platform was evaluated using doxorubicin (DOX) as a model drug for applications in triple-negative breast cancer. A facile, nonsolvent-induced phase separation (NIPS) method was adopted to form composite beads. We observed that CNC loading within these beads played a critical role in the mechanical stability, porosity, water uptake, diffusion, release, and pharmacological activity of the drug from the delivery system. When loaded with DOX, composite beads significantly controlled the release of the drug in a pH-dependent pattern. For example, PLA/CNC beads containing 37.5 wt % of CNCs showed a biphasic release of DOX, where 41 and 82% of the loaded drug were released at pH 7.4 and pH 5.5, respectively, over 7 days. Drug release followed Korsmeyer's kinetics, indicating that the release mechanism was mostly diffusion and swelling-controlled. We showed that DOX released from drug-loaded PLA/CNC composite beads locally suppressed the growth and proliferation of triple-negative breast cancer cells, MBA-MB-231, via the apoptotic pathway. The efficacy of the DDS was evaluated in human tissue explants. We envision that such systems will find applications for designing biobased platforms with programmed stability and drug delivery functions.

PLGA/PLA-Based Long-Acting Injectable Depot Microspheres in Clinical Use: Production and Characterization Overview for Protein/Peptide Delivery

Over the past few decades, long acting injectable (LAI) depots of polylactide-co-glycolide (PLGA) or polylactic acid (PLA) based microspheres have been developed for controlled drug delivery to reduce dosing frequency and to improve the therapeutic effects. Biopharmaceuticals such as proteins and peptides are encapsulated in the microspheres to increase their bioavailability and provide a long release period (days or months) with constant drug plasma concentration. The biodegradable and biocompatible properties of PLGA/PLA polymers, including but not limited to molecular weight, end group, lactide to glycolide ratio, and minor manufacturing changes, could greatly affect the quality attributes of microsphere formulations such as release profile, size, encapsulation efficiency, and bioactivity of biopharmaceuticals. Besides, the encapsulated proteins/peptides are susceptible to harsh processing conditions associated with microsphere fabrication methods, including exposure to organic solvent, shear stress, and temperature fluctuations. The protein/peptide containing LAI microspheres in clinical use is typically prepared by double emulsion, coacervation, and spray drying techniques. The purpose of this review is to provide an overview of the formulation attributes and conventional manufacturing techniques of LAI microspheres that are currently in clinical use for protein/peptides. Furthermore, the physicochemical characteristics of the microsphere formulations are deliberated.

Biodegradable Electrospun Nanofibers: A New Approach For Rhinosinusitis Treatment

Biodegradable polymeric nanofibers containing mometasone furoate can be a new approach to drug delivery to treat chronic rhinosinusitis, providing controlled steroid delivery to the sinonasal mucosa. This study aimed to develop biodegradable polymeric nanofibers and explore the safety of these fibers in an in vivo rabbit model. The nanofibers' development has been optimized using the Response Surface Methodology (RSM) obtained with Design of Experiments (DoE) with the best conditions related to the polymer concentration and proportion of solvents used in the electrospinning process. The nanofibers were prepared, operating as a determinant factor, the nanofiber formation and its diameter evaluated by Scanning Electron Microscopy (SEM). The ideal system obtained was assessed by SEM, thermogravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), assay, and drug delivery by UHLPC validated method. The results showed that the drug is dispersed in the polymeric matrix, is stable, and showed sustained release kinetics in a bio-relevant nasal environment (Higuchi model kinetics). In vivo tests, the level of inflammation at the animals' mucosa which received the nanofiber with the mometasone furoate was lower than those that received the nanofibers without the drug (α = 0.05). Histopathology analysis showed that the polymeric nanofibers containing mometasone are safe when topically applied on the sinonasal mucosa, opening a new horizon in chronic rhinosinusitis treatment.

A controlled release bupivacaine-alginate construct: Effect on chondrocyte hypertrophy conversion

Objective:

Osteoarthritis is a degenerative disease of the joint, affecting over 30 million people in the US¹. A key characteristic of OA is chondrocyte hypertrophy, characterized by chondrocyte changes to a more rounded and osteoblastic phenotype, characterized by increased IL-6 and IL-8 secretion². While there are no cures for OA, treatments focus on mitigating pain and inflammation, the two main symptoms of OA. However, the analgesics, NSAIDS and corticosteroids commonly used, do not target regeneration and have negative side effects. Local anesthetics (LA) can be used as a pain management alternative but are usually short lasting and therefore, not suited for chronic conditions such as OA. Our engineered sustained release local anesthetic construct successfully delivers bupivacaine for an extended period of time^3–5. This study is designed to evaluate the effect of the LA system on chondrocytes in an inflammatory OA-like environment.

Design:

Chondrocytes were cultured with bolus, liposomal, or construct LA and either untreated or treated with TNF-α and IL-1α for 24 hrs, 48 hrs, or 96 hrs. Chondrocyte viability, interleukin-8 (IL-8), interleukin-6 (IL-6), collagenase activity and proteoglycan deposition were assessed.

Results:

In the presence of the engineered construct, the chondrocytes retained viability and regenerative function. Moreover, the construct allowed for higher initial doses to be used, which promoted more regeneration and decreased inflammation without compromising cellular viability.

Conclusions:

The construct promotes a less hypertrophic chondrocyte environment while promoting a more anti-inflammatory environment. These two factors are consistent with a less OA progressive environment when using the engineered construct, compared to bolus LA.

Chrysin-loaded PLGA attenuates OVA-induced allergic asthma by modulating TLR/NF-κB/NLRP3 axis

Asthma, one of the significant public health problems, is triggered by certain inflammatory processes in the airways that are not addressed propitiously by current therapies. Though pieces of evidence on allergic asthma mitigation by the anti-inflammatory bioflavonoid chrysin (CHR) are accumulating, poor bioavailability, and low solubility curtail drug development. To overcome these shortcomings, CHR loaded nanoparticle (CHR-NP) was formulated, and its salutary effect in preclinical murine allergic asthma model via the peroral route was evaluated. The spherical nanosized particles showed slow, sustained release in vitro. Moreover, CHR-NP dramatically reduced the serum IgE, ovalbumin (OVA)-induced lung histological alteration, as well as Th2 (T-helper 2) cytokines in the bronchoalveolar lavage fluid (BALF). It also suppressed the elevated serum pro-inflammatory cytokines and their upstream TLR/NF-κB/NLRP3 pathway activation in lung superior to CHR and almost identical to dexamethasone (DEX). Thus this study suggests the potentiality of CHR-NP in ameliorating allergic asthma progression.

Effects of shell thickness of hollow poly(lactic acid) nanoparticles on sustained drug delivery for pharmacological treatment of glaucoma

Structural designing of carriers with extended drug release profiles is critically important for achieving long-acting drug delivery systems toward efficient managements of chronic diseases. Here, we present a strategy to exploit the effects of the shell thickness of hollow poly(lactic acid) nanoparticles (HPLA NPs) in sustained glaucoma therapy. Formulations based on pilocarpine-loaded HPLA NPs with tailorable shell thickness ranging from 10 to 100 nm were shown to be highly compatible with human lens epithelial cells in vitro and with rabbit eyes in vivo. Specifically, shell thickness regulated the release of pilocarpine, with thick shells (~70 to 100 nm) providing sustained drug release performance but limited drug-loading efficiency, whereas ultrathin shells (~10 nm) induced the opposite effects. Remarkably, moderately thick shells (~40 nm) showed the most effective release profile of pilocarpine (above the therapeutic levels of ~10 µg/mL for over 56 days). In a rabbit model of glaucoma, single intracameral administration of an HPLA NP-based formulation with shell thickness of ~40 nm sustainably alleviated ocular hypertension for over 56 days, consequently protecting the structural integrity of the corneal endothelium, preserving the electrophysiological functions of the retina, and attenuating retinal and optic nerve degeneration in progressively glaucomatous eyes. The findings therefore implied a promising use of shell thickness effects in the development of long-acting drug delivery systems for pharmacological treatment of chronic ocular diseases. STATEMENT OF SIGNIFICANCE: Owing to their large surface areas and modifiable structures, nanoparticles have been considered as a promising platform for drug delivery; however, achieving drug nanocarrier systems with reduced burst release and sustained therapeutic efficacy remains challenges. This work presents the first report on rational design of hollow poly(lactic acid) nanocarriers for tailoring the structure-property-function relationships toward effective treatment of glaucoma. The shell thickness of the hollow nanocarriers is demonstrated to have influential impacts on pilocarpine encapsulation efficiency and release profile, indicating that the most sustained delivery performance (maintaining the release of pilocarpine above therapeutic level over 56 days) can be obtained for the polymeric nanoparticles with moderate shell thickness of ~40 nm.

Selectively Biodegradable Polyesters: Nature-Inspired Construction Materials for Future Biomedical Applications

In the last half-century, the development of biodegradable polyesters for biomedical applications has advanced significantly. Biodegradable polyester materials containing external stimuli-sensitive linkages are favored in the development of therapeutic devices for pharmacological applications such as delivery vehicles for controlled/sustained drug release. These selectively biodegradable polyesters degrade after particular external stimulus (e.g., pH or redox potential change or the presence of certain enzymes). This review outlines the current development of biodegradable synthetic polyesters materials able to undergo hydrolytic or enzymatic degradation for various biomedical applications, including tissue engineering, temporary implants, wound healing and drug delivery.

Hyperbranched Polycaprolactone through RAFT Polymerization of 2-Methylene-1,3-dioxepane

Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO). Vinyl 2-[(ethoxycarbonothioyl) sulfanyl] propanoate (ECTVP) was used as polymerizable chain transfer agent. Living polymerization behavior was proved via pseudo linear kinetics, the molecular weight of polymers increasing with conversion and successful chain extension. The structure of polymers was characterized by ¹H NMR spectroscopy, tripe detection gel permeation chromatography, and differential scanning calorimetry. The polymer composition was shown to be able to tune to vary the amount of ester repeat units in the polymer backbone, and hence determine the degree of branching. As expected, the degree of crystallinity was lower and the rate of degradation was faster in cases of increasing the number of branches.

Poly(lactic-co-glycolic acid) devices: Production and applications for sustained protein delivery

Injectable or implantable poly(lactic-co-glycolic acid) (PLGA) devices for the sustained delivery of proteins have been widely studied and utilized to overcome the necessity of repeated administrations for therapeutic proteins due to poor pharmacokinetic profiles of macromolecular therapies. These devices can come in the form of microparticles, implants, or patches depending on the disease state and route of administration. Furthermore, the release rate can be tuned from weeks to months by controlling the polymer composition, geometry of the device, or introducing additives during device fabrication. Slow-release devices have become a very powerful tool for modern medicine. Production of these devices has initially focused on emulsion-based methods, relying on phase separation to encapsulate proteins within polymeric microparticles. Process parameters and the effect of additives have been thoroughly researched to ensure protein stability during device manufacturing and to control the release profile. Continuous fluidic production methods have also been utilized to create protein-laden PLGA devices through spray drying and electrospray production. Thermal processing of PLGA with solid proteins is an emerging production method that allows for continuous, high-throughput manufacturing of PLGA/protein devices. Overall, polymeric materials for protein delivery remain an emerging field of research for the creation of single administration treatments for a wide variety of disease. This review describes, in detail, methods to make PLGA devices, comparing traditional emulsion-based methods to emerging methods to fabricate protein-laden devices. This article is categorized under: Biology-Inspired Nanomaterials > Protein and Virus-Based Structures Implantable Materials and Surgical Technologies > Nanomaterials and Implants Biology-Inspired Nanomaterials > Peptide-Based Structures.

Antileishmanial and Immunomodulatory Effect of Babassu-Loaded PLGA Microparticles: A Useful Drug Target to Leishmania amazonensis Infection

The immunological and the anti-Leishmania amazonensis activity of babassu-loaded poly(lactic-co-glycolic acid) [PLGA] microparticles was evaluated. The anti-Leishmania activity was evaluated against promastigotes or amastigotes forms, in Balb/c macrophages. The size of the microparticles ranged from 3 to 6.4 μm, with a zeta potential of −25 mV and encapsulation efficiency of 48%. The anti-Leishmania activity of the PLGA microparticles loaded with the aqueous extract of babassu mesocarp (MMP) (IC₅₀) was 10-fold higher than that free extract (Meso). MMP exhibited overall bioavailability and was very effective in eliminating intracellular parasites. MMP also reduced ex vivo parasite infectivity probably by the increased production of nitric oxide, hydrogen peroxide, and TNF-α indicating the activation of M1 macrophages. The overexpression of TNF-α did not impair cell viability, suggesting antiapoptotic effects of MMP. In conclusion, babassu-loaded microparticles could be useful for drug targeting in the treatment of leishmaniasis, due to the immunomodulatory effect on macrophage polarization and the increased efficacy as an anti-Leishmania product after the microencapsulation. These findings are of great relevance since the development of new drugs for the treatment of neglected diseases is desirable, mainly if we consider the high morbidity and mortality rates of leishmaniasis worldwide.

Alginate-liposomal construct for bupivacaine delivery and MSC function regulation

Mesenchymal stromal cell (MSC) therapies have become potential treatment options for multiple ailments and traumatic injuries. In the clinical setting, MSC are likely to be co-administered with local anesthetics (LA) which have been shown to have dose- and potency-dependent detrimental effects on the viability and function of cells. We previously developed and characterized a sustained-release LA delivery formulation comprised of alginate-encapsulated liposomal bupivacaine. The current studies were designed to evaluate the effect of this formulation on the secretion of three key MSC regulatory molecules, interleukin 6 (IL-6), prostaglandin E2 (PGE2), and transforming growth factor-beta 1 (TGF-β1). MSCs were treated with several bupivacaine formulations-bolus, liposome, or alginate-liposome construct (engineered construct)-in the presence or absence of inflammatory stimulus to stimulate an injured tissue environment. Our results indicated that compared to bolus or liposomal bupivacaine, the engineered construct preserved or promoted MSC anti-inflammatory PGE2 secretion; however, the engineered construct did not increase TGF-β1 secretion. Bupivacaine release profile analyses indicated that mode of drug delivery controlled the LA concentration over time and pathway analysis identified several shared and cytokine-specific molecular mediators for IL-6, PGE2, and TGF-β1 which could explain differential MSC secretion responses in the presence of bupivacaine. Collectively, these studies support the potential utility of alginate-encapsulated LA constructs for anti-inflammatory cell therapy co-administration and indicate that mode of local anesthetic delivery can significantly alter MSC secretome function.

Nano- and micro-materials in the treatment of internal bleeding and uncontrolled hemorrhage

Internal bleeding is defined as the loss of blood that occurs inside of a body cavity. After a traumatic injury, hemorrhage accounts for over 35% of pre-hospital deaths and 40% of deaths within the first 24 hours. Coagulopathy, a disorder in which the blood is not able to properly form clots, typically develops after traumatic injury and results in a higher rate of mortality. The current methods to treat internal bleeding and coagulopathy are inadequate due to the requirement of extensive medical equipment that is typically not available at the site of injury. To discover a potential route for future research, several current and novel treatment methods have been reviewed and analyzed. The aim of investigating different potential treatment options is to expand available knowledge, while also call attention to the importance of research in the field of treatment for internal bleeding and hemorrhage due to trauma.

Applicability of electrospun polypropylene carbonate polymers as a drug carrier for sirolimus

Polypropylene carbonate (PPC), a biodegradable aliphatic polyester, exhibits one particular advantage over other polyesters, which is that following degradation in vivo, it primarily produces H2O and CO2, causing minimal side effects. Although PPC exhibits limited mechanical strength, and is therefore not able to serve as a scaffold to support tissue regeneration, it may be suitable for drug delivery; however, this requires further investigation. In the present study, electrospinning was applied to generate PPC polymers containing sirolimus, a cell growth‑inhibiting drug which is used to treat restenosis. The properties of PPC‑sirolimus polymers were examined using scanning electron microscopy, differential scanning calorimetry and in vitro degradation assays. Drug loading and entrapment efficiency were determined, and in vitro sirolimus‑release from the polymer was assessed. Furthermore, the effect of PPC‑sirolimus polymers on cell growth was measured using an MTT assay in vitro. The results of the present study demonstrated that electrospun PPC polymers formed a uniform three‑dimensional, grid‑intertwined, net‑like structure; the surface of the polymers was smooth and the diameter was ~3 µm. Differential scanning calorimetry analysis demonstrated that sirolimus existed in an amorphous state in the polymer. Following soaking in PBS for 4 weeks, the polymer swelled and the net‑like structure broke down and fragmented. Sirolimus loading and entrapment efficiency were 10.3±3.2 and 95.1±10.6%, respectively. Sirolimus‑release from PPC‑sirolimus polymers continued for 28 days in PBS. PPC‑sirolimus markedly inhibited the growth of rat aortic adventitial fibroblast cells, an effect which was not observed with PPC alone. The results of the present study suggest that PPC polymers are a promising alternative drug carrier for sirolimus.

Biodegradable nitric oxide precursor-loaded micro- and nanoparticles for the treatment of Staphylococcus aureus biofilms

Bacteria in biofilms are more difficult to eradicate than planktonic bacteria and result in treatment challenges for many chronic infectious diseases. Nitric oxide (NO) is an endogenous molecule that offers potential as an alternative to conventional antibiotics; however its sustained topical delivery to biofilms is not readily achieved. With this in mind, we report the development of biodegradable poly(lactide-co-glycolide) (PLGA) based microparticles (MP) and nanoparticles (NP) for encapsulation of the NO precursor isosorbide mononitrate (ISMN) and the controlled delivery to Staphylococcus aureus (S. aureus) biofilms. Firstly, water-in-oil-in-water (w/o/w) emulsification/solvent evaporation methods for PLGA NP and MP syntheses were experimentally optimised with respect to particle size and ISMN loading/encapsulation efficiency. The influence of various experiment parameters, such as the volume of inner aqueous phase, concentration of surfactants, mixing time on the particle size, drug loading and encapsulation efficiency were investigated systematically. Both PLGA MP and NP formulations enabled sustained ISMN release in physiological media over 3 to 5 days. PLGA MP with diameters of ∼3 μm and ISMN loading of 2.2% (w/w) were identified as the optimum delivery system and demonstrated significant antibacterial activity in S. aureus biofilms. This behaviour is considered to be due to targeted biofilm delivery through a combination of effective penetration and sustained release of ISMN.

Fabrication of poly(ε-caprolactone) tissue engineering scaffolds with fibrillated and interconnected pores utilizing microcellular injection molding and polymer leaching

Three-dimensional fibrillated interconnected porous poly(ε-caprolactone) scaffolds were prepared by microcellular injection molding and polymer leaching.

Poly(lactic acid) for delivery of bioactive macromolecules

Therapeutic biomolecules often require frequent administration and supramolecular dosing to achieve therapeutic efficiencies and direct infusion into treatment or defect sites results in inadequate physiological response and at times severe side effects or mis-targeting. Delivery systems serve several purposes such as increased circulatory time, increased biomolecule half-life, and incorporation of new innovations can enable highly specific cell targeting and improved cell and nucleus permeability. Poly(lactic acid) (PLA) has become a "material of choice" due to wide availability, reproducible synthetic route, customization, versatility, biodegradability and biocompatibility. Furthermore, PLA is amenable to a variety of fabrication methodologies and chemistries allowing an expansive library correlating physio-chemical properties, characteristics, and applications. This article discusses challenges to biomolecule delivery, and classical approaches of PLA based biomolecule delivery and targeting strategies under development and in trials.

In vitro cytotoxic activity and transfection efficiency of polyethyleneimine functionalized gold nanoparticles

In this study, we report on the synthesis of polyethyleneimine (PEI) coated gold nanoparticles for potential application as non-viral gene carriers. In the presence of the electrolyte, sodium citrate, the electrophoretic mobility confirmed the electroneutral nature of the nanocomplex. MTT cell viability assays showed that the Au-PEI/pDNA complexes maintained over 60% cell viability across the four cell lines tested. Transfection studies were accomplished using the luciferase reporter gene assay. Results showed that the FAuNPs produced greater transgene activity than the cationic polymer/DNA complexes on their own. This was evident for the Au-PEI/pDNA complex which produced a 12 fold increase in the HEK293 cells and a 9 fold increase in the HepG2 cells, compared to the PEI/pDNA complexes.

Colloidal Gold-Mediated Delivery of Bleomycin for Improved Outcome in Chemotherapy

Nanoparticles (NPs) can be used to overcome the side effects of poor distribution of anticancer drugs. Among other NPs, colloidal gold nanoparticles (GNPs) offer the possibility of transporting major quantities of drugs due to their large surface-to-volume ratio. This is while confining these anticancer drugs as closely as possible to their biological targets through passive and active targeting, thus ensuring limited harmful systemic distribution. In this study, we chose to use bleomycin (BLM) as the anticancer drug due to its limited therapeutic efficiency (harmful side effects). BLM was conjugated onto GNPs through a thiol bond. The effectiveness of the chemotherapeutic drug, BLM, is observed by visualizing DNA double strand breaks and by calculating the survival fraction. The action of the drug (where the drug takes effect) is known to be in the nucleus, and our experiments have shown that some of the GNPs carrying BLM were present in the nucleus. The use of GNPs to deliver BLM increased the delivery and therapeutic efficacy of the drug. Having a better control over delivery of anticancer drugs using GNPs will establish a more successful NP-based platform for a combined therapeutic approach. This is due to the fact that GNPs can also be used as radiation dose enhancers in cancer research.

Controlled initial surge despite high drug fraction and high solubility

Potential connections between release profiles and solvent evaporation rates alongside polymer chemistry were elucidated for the release of tetracycline hydrochloride from two different poly (d, l-lactide-co-glycolide) (PLGA) film matrices containing high drug fractions (50%, 30%, and 15%), and prepared at two distinct solvent evaporation rates. At highest tetracycline concentrations (50%), (i) the early release rates were ≤0.5 μg/min in all cases; (ii) release was linear from systems fabricated with lower lactic content and slower solvent evaporation rate and bimodal from systems fabricated with higher lactic content and faster evaporation rate; (iii) surface fractions covered by the drug were similar at both evaporation rates for 85:15 PLGA but very different for 50:50 PLGA, leading to unexpectedly reduced early release from 50:50 PLGA than from 85:15 PLGA when both the matrices were fabricated using a slower evaporation rate. These features remained unaffected in case of low drug concentration. Results suggested that during the formation of the drug-polymer microstructure, the combined effect of polymer chemistry and solvent evaporation rate sets apart the surface characteristics and the initial release profiles of systems containing high drug fraction, and an appropriate combination of these parameters may be utilized to control the early stage of drug release.

3D printed structures for delivery of biomolecules and cells: tissue repair and regeneration

This paper reviews the current approaches to using 3D printed structures to deliver bioactive factors (e.g., cells and biomolecules) for tissue repair and regeneration.

Preparation of a Thermosensitive Gel Composed of a mPEG-PLGA-PLL-cRGD Nanodrug Delivery System for Pancreatic Tumor Therapy

It is hypothesized that a gel (NP-Gel) composed of thermosensitive gel (Gel) and nanoparticles (NP) can prolong drug release time and overcome the drug resistance of pancreatic tumor cells. Paclitaxel (PTX)-loaded monomethoxy (polyethylene glycol)-poly(d,l-lactide-co-glycolide)-poly(l-lysine)-cyclic peptide (arginine-glycine-aspartic-glutamic-valine acid) (mPEG-PLGA-PLL-cRGD) NP and NP-Gel were designed, optimized, and characterized using dynamic light scattering, transmission electron microscopy, high efficiency liquid chromatography, and rheological analyses. Aspc-1/PTX cell was used in a cell uptake test. A 3D cell model was used to mimic PTX elimination in tissue. The in vivo sustained release and antitumor effects were studied in Aspc-1/PTX-loaded nude mice with xerographic and in situ tumors. The NP were 133.7 ± 28.3 nm with 85.03% entrapped efficiency, 1.612% loaded ratio, and suitable rheological properties. PTX was released as NP from NP-Gel, greatly prolonging the release and elimination times to afford long-term effects. NP-Gel enhanced the uptake of PTX by Aspc-1/PTX cells more than using NP or the Gel alone. Gel and NP-Gel remained solid in the tumor and stayed over 50 days versus the several days of NP in solution. NP-Gel exhibited a much higher inhibition rate in vivo than in solution, NP, or the Gel alone. In conclusion, the antitumor effects of NP-Gel might arise from synergic effects from NP and the Gel. NP primarily reversed drug resistance, while the Gel prolonged release time considerably in situ. This preparation proved effective with a very small PTX dose (250 μg/kg) and exhibited few toxic effects in normal tissue.

Development of Sustained Release "NanoFDC (Fixed Dose Combination)" for Hypertension - An Experimental Study

Objectives

The present study was planned to formulate, characterize and evaluate the pharmacokinetics of a novel “NanoFDC” comprising three commonly prescribed anti-hypertensive drugs, hydrochlorothiazide (a diuretic), candesartan (ARB) and amlodipine (a calcium channel blocker).

Basic Methods

The candidate drugs were loaded in Poly (DL-lactide-co-gycolide) (PLGA) by emulsion- diffusion-evaporation method. The formulations were evaluated for their size, morphology, drug loading and in vitro release individually. Single dose pharmacokinetic profiles of the nanoformulations alone and in combination, as a NanoFDC, were evaluated in Wistar rats.

Results

The candidate drugs encapsulated inside PLGA showed entrapment efficiencies ranging from 30%, 33.5% and 32% for hydrochlorothiazide, candesartan and amlodipine respectively. The nanoparticles ranged in size from 110 to 180 nm. In vitro release profile of the nanoformulation showed 100% release by day 6 in the physiological pH 7.4 set up with PBS (phosphate buffer saline) and by day 4-5 in the intestinal pH 1.2 and 8.0 set up SGF (simulated gastric fluid) and SIF (simulated intestinal fluid) respectively. In pharmacokinetic analysis a sustained-release for 6 days and significant increase in the mean residence time (MRT), as compared to the respective free drugs was noted [MRT of amlodipine, hydrochlorothiazide and candesartan changed from 8.9 to 80.59 hours, 11 to 69.20 hours and 9 to 101.49 hours respectively].

Conclusion

We have shown for the first time that encapsulating amlodipine, hydrochlorothiazide and candesartan into a single nanoformulation, to get the “NanoFDC (Fixed Dose Combination)” is a feasible strategy which aims to decrease pill burden.

Evaluation of Lapatinib Powder-Entrapped Biodegradable Polymeric Microstructures Fabricated by X-Ray Lithography for a Targeted and Sustained Drug Delivery System

An oral medication of a molecular targeted drug, lapatinib, is taken regularly to maintain the drug concentration within the desired therapeutic levels. To alleviate the need for such cumbersome administration schedules in several drugs, advanced drug delivery systems (DDSs), which can provide time-controlled and sustained drug release, have recently received significant attention. A biodegradable synthetic polymer, such as polycaprolactone (PCL), is usually used as a carrier material for DDSs. In this paper, lapatinib powder-entrapped, PCL microstructures were fabricated with a precise X-ray lithography-based method. In vitro experiments on HER2 positive-human gastric cancer derived NCI-N87 cells were performed to appraise the drug release characteristics of the fabricated DDSs. The in vitro results indicate that after the X-ray lithography process, the lapatinib powder is still working well and show time- and dose- dependent drug release efficiencies. The cell growth inhibition characteristics of one hundred 40-μm sized microstructures were similar to those of a 1 μM lapatinib solution for over 144 h. In conclusion, the developed lapatinib-entrapped PCL microstructures can be used in molecular targeted delivery and sustained release as effective cancer-targeted DDSs.

Cell microencapsulation with synthetic polymers

The encapsulation of cells into polymeric microspheres or microcapsules has permitted the transplantation of cells into human and animal subjects without the need for immunosuppressants. Cell-based therapies use donor cells to provide sustained release of a therapeutic product, such as insulin, and have shown promise in treating a variety of diseases. Immunoisolation of these cells via microencapsulation is a hotly investigated field, and the preferred material of choice has been alginate, a natural polymer derived from seaweed due to its gelling conditions. Although many natural polymers tend to gel in conditions favorable to mammalian cell encapsulation, there remain challenges such as batch to batch variability and residual components from the original source that can lead to an immune response when implanted into a recipient. Synthetic materials have the potential to avoid these issues; however, historically they have required harsh polymerization conditions that are not favorable to mammalian cells. As research into microencapsulation grows, more investigators are exploring methods to microencapsulate cells into synthetic polymers. This review describes a variety of synthetic polymers used to microencapsulate cells.

PLGA: a unique polymer for drug delivery

Biodegradable polymers have played an important role in the delivery of drugs in a controlled and targeted manner. Polylactic-co-glycolic acid (PLGA) is one of the extensively researched synthetic biodegradable polymers due to its favorable properties. It is also known as a ‘Smart Polymer’ due to its stimuli sensitive behavior. A wide range of PLGA-based drug delivery systems have been reported for the treatment or diagnosis of various diseases and disorders. The present review provides an overview of the chemistry, physicochemical properties, biodegradation behavior, evaluation parameters and applications of PLGA in drug delivery. Different drug–polymer combinations developed into drug delivery or carrier systems are enumerated and discussed.

Poly(lactide-co-glycolide) microspheres for MRI-monitored transcatheter delivery of sorafenib to liver tumors

The multi-kinase inhibitor (MKI) sorafenib can be an effective palliative therapy for patients with hepatocellular carcinoma (HCC). However, patient tolerance is often poor due to common systemic side effects following oral administration. Local transcatheter delivery of sorafenib to liver tumors has the potential to reduce systemic toxicities while increasing the dose delivered to targeted tumors. We developed sorafenib-eluting PLG microspheres for delivery by intra-hepatic transcatheter infusion in an orthotropic rodent HCC model. The particles also encapsulated iron-oxide nanoparticles permitting magnetic resonance imaging (MRI) of intra-hepatic biodistributions. The PLG microspheres (diameter≈1μm) were loaded with 18.6% (w/w) sorafenib and 0.54% (w/w) ferrofluid and 65.2% of the sorafenib was released within 72h of media exposure. In vitro studies demonstrated significant reductions in HCC cell proliferation with increasing doses of the sorafenib-eluting microspheres, where the estimated IC50 was a 29μg/mL dose of microspheres. During in vivo studies, MRI permitted intra-procedural visualization of intra-hepatic microsphere delivery. At 72h after microsphere infusion, microvessel density was significantly reduced in tumors treated with the sorafenib-eluting microspheres compared to both sham control tumors (by 35%) and controls (by 30%). These PLG microspheres offer the potential to increase the efficacy of molecularly targeted MKI therapies while reducing systemic exposures via selective catheter-directed delivery to HCC.

Functional films from unsaturated poly(macrolactones) by thiol–ene cross-linking and functionalisation

The synthesis of cross-linked surface-functional polyester films from natural macrolactones and their subsequent reaction with a fluorescent marker are presented.