Nanostructured lipid (NLCs) carriers as a bioavailability enhancement tool for oral administration

Liposomal Nanomaterials: A Rising Star in Glioma Treatment

Glioma is a primary malignant tumor in the central nervous system. In recent years, the treatment of glioma has developed rapidly, but the overall survival of glioma patients has not significantly improved. Due to the presence of the blood-brain barrier and intracranial tumor barrier, many drugs with good effects to cure glioma in vitro cannot be accurately transported to the corresponding lesions. In order to enable anti-tumor drugs to overcome the barriers and target glioma, nanodrug delivery systems have emerged recently. It is gratifying that liposomes, as a multifunctional nanodrug delivery carrier, which can be compatible with hydrophilic and hydrophobic drugs, easily functionalized by various targeted ligands, biodegradable, and hypoimmunogenic in vivo, has become a quality choice to solve the intractable problem of glioma medication. Therefore, we focused on the liposome nanodrug delivery system, and summarized its current research progress in glioma. Hopefully, this review may provide new ideas for the research and development of liposome-based nanomaterials for the clinical treatment of glioma.

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Potential lipid-based strategies of amphotericin B designed for oral administration in clinical application

Amphotericin B (AmB) is regarded as a first-line therapy against life-threatening invasive fungal infections. Due to its poor oral bioavailability, AmB is restricted to intravenous administration in clinical practice. As science continues to move forward, two lipid-based formulations are successfully developed for oral AmB administration, currently undergoing phase I clinical trials. Encouragingly, lipid-AmB conjugates with emulsions also exhibit a better bioavailability, which may be another strategy to design oral AmB formulation in clinical practice. Thus, this review mainly focused on the two lipid-based formulations in clinical trials, and discussed the potential perspectives of AmB-lipid conjugation-loaded nanocochleates and emulsions.

The novel hepatoprotective effects of silibinin-loaded nanostructured lipid carriers against diazinon-induced liver injuries in male mice

In the current study, silibinin-loaded nanostructured lipid carriers (Sili-NLCs) was synthesized, and the hepatoprotective effectiveness of Sili-NLCs against diazinon (DZN)-induced liver damage in male mice was evaluated. The emulsification-solvent evaporation technique was applied to prepare Sili-NLCs, and characterized by using particle size, zeta potential, entrapment efficacy (EE %), in vitro drug release behavior, and stability studies. In vivo, studies were done on male mice. Hepatotoxicity in male mice were induced by DZN (10 mg/kg/day, i.p.). Four groups treated with silibinin and Sili-NLCs with the same doses (100 and 200 mg/kg, p.o.). On 31th days, serum and liver tissue samples were collected. Alanine (ALT) and aspartate (AST) aminotransferase levels, oxidative stress biomarkers, inflammatory cytokines, and histopathological alterations were assessed. The Sili-NLCs particle size, zeta potential, polydispersity index (PDI), and EE % were obtained at 220.8 ± 0.86 nm, -18.7 ± 0.28 mV, 0.118 ± 0.03, and 71.83 ± 0.15%, respectively. The in vivo studies revealed that DZN significantly increased the serum levels of AST, ALT, hepatic levels of lipid peroxidation (LPO), and tumor necrosis factor-α (TNF-α), while decreased the antioxidant defense system in the mice's liver. However, Sili-NLCs was more effective than silibinin to return the aforementioned ratio toward the normal situation, and these results were well correlated with histopathological findings. Improvement of silibinin protective efficacy and oral bioavailability by using NLCs caused to Sili-NLCs can be superior to free silibinin in ameliorating DZN-induced hepatotoxicity in male mice.

Curcumin-infused nanostructured lipid carriers: a promising strategy for enhancing skin regeneration and combating microbial infection

BACKGROUND

Curcumin is a biomolecule that can be extracted from the Curcuma longa that has been shown to have the potential to aid skin wound healing. It has been studied for its anti-inflammatory and antioxidant properties, which may help to reduce swelling and promote tissue repair. However, curcumin has low solubility in water, which can limit its absorption and bioavailability. Encapsulating it in lipid nanoparticles may help to increase its absorption, leading to improved bioavailability.

METHODS

Curcumin-loaded nanostructure lipid nanocarriers (CURC-NLCs) were prepared and characterized. Also, the phenolic, flavonoid contents, antioxidant and antimicrobial efficacy against gram-positive and gram-negative bacteria were investigated. Furthermore, in vivo rabbit animal model was used to test its regenerative capacity and wound-healing efficiency.

RESULTS

The CURC-NLCs significantly increased the content of phenolic and flavonoid compounds compared to curcumin, resulting in a dramatic increase in antioxidant activity. CURC-NLCs also showed a potent inhibitory effect on Gram-positive, Gram-negative, and fungi, two times higher than curcumin. CURC-NLCs showed a higher potential to fasten the wound healing of full-thickness skin injuries as it resulted in 1.15- and 1.9-fold higher wound closure at the first week of injury compared to curcumin and control, respectively (p < 0.0001).

CONCLUSION

These results suggest that CURC-NLCs have an excellent potential to promote skin regeneration, which could be attributed to its antioxidant and broad-spectrum antimicrobial effect.

Gout therapeutics and drug delivery

Gout is a common inflammatory arthritis caused by persistently elevated uric acid levels. With the improvement of people's living standards, the consumption of processed food and the widespread use of drugs that induce elevated uric acid, gout rates are increasing, seriously affecting the human quality of life, and becoming a burden to health systems worldwide. Since the pathological mechanism of gout has been elucidated, there are relatively effective drug treatments in clinical practice. However, due to (bio)pharmaceutical shortcomings of these drugs, such as poor chemical stability and limited ability to target the pathophysiological pathways, traditional drug treatment strategies show low efficacy and safety. In this scenario, drug delivery systems (DDS) design that overcome these drawbacks is urgently called for. In this review, we initially describe the pathological features, the therapeutic targets, and the drugs currently in clinical use and under investigation to treat gout. We also comprehensively summarize recent research efforts utilizing lipid, polymeric and inorganic carriers to develop advanced DDS for improved gout management and therapy.

Solid Lipid Nanoparticles vs. Nanostructured Lipid Carriers: A Comparative Review

Solid-lipid nanoparticles and nanostructured lipid carriers are delivery systems for the delivery of drugs and other bioactives used in diagnosis, therapy, and treatment procedures. These nanocarriers may enhance the solubility and permeability of drugs, increase their bioavailability, and extend the residence time in the body, combining low toxicity with a targeted delivery. Nanostructured lipid carriers are the second generation of lipid nanoparticles differing from solid lipid nanoparticles in their composition matrix. The use of a liquid lipid together with a solid lipid in nanostructured lipid carrier allows it to load a higher amount of drug, enhance drug release properties, and increase its stability. Therefore, a direct comparison between solid lipid nanoparticles and nanostructured lipid carriers is needed. This review aims to describe solid lipid nanoparticles and nanostructured lipid carriers as drug delivery systems, comparing both, while systematically elucidating their production methodologies, physicochemical characterization, and in vitro and in vivo performance. In addition, the toxicity concerns of these systems are focused on.

Solid Lipid Nanoparticles: Review of the Current Research on Encapsulation and Delivery Systems for Active and Antioxidant Compounds

Various active compounds are easily damaged, so they need protection and must be easily absorbed and targeted. This problem can be overcome by encapsulating in the form of solid lipid nanoparticles (SLNs). Initially, SLNs were widely used to encapsulate hydrophobic (non-polar) active compounds because of their matched affinity and interactions. Currently, SLNs are being widely used for the encapsulation of hydrophilic (polar) and semipolar active compounds, but there are challenges, including increasing their entrapment efficiency. This review provides information on current research on SLNs for encapsulation and delivery systems for active and antioxidant compounds, which includes various synthesis methods and applications of SLNs in various fields of utilization. SLNs can be developed starting from the selection of solid lipid matrices, emulsifiers/surfactants, types of active compounds or antioxidants, synthesis methods, and their applications or utilization. The type of lipid used determines crystal formation, control of active compound release, and encapsulation efficiency. Various methods can be used in the SLN fabrication of active compounds and hydrophilic/hydrophobic antioxidants, which have advantages and disadvantages. Fabrication design, which includes the selection of lipid matrices, surfactants, and fabrication methods, determines the characteristics of SLNs. High-shear homogenization combined with ultrasonication is the recommended method and has been widely used because of the ease of preparation and good results. Appropriate fabrication design can produce SLNs with stable active compounds and antioxidants that become suitable encapsulation systems for various applications or uses.

Advances in Antitumor Nano-Drug Delivery Systems of 10-Hydroxycamptothecin

10-Hydroxycamptothecin (HCPT) is a natural plant alkaloid from Camptotheca that shows potent antitumor activity by targeting intracellular topoisomerase I. However, factors such as instability of the lactone ring and insolubility in water have limited the clinical application of this drug. In recent years, unprecedented advances in biomedical nanotechnology have facilitated the development of nano drug delivery systems. It has been found that nanomedicine can significantly improve the stability and water solubility of HCPT. NanoMedicines with different diagnostic and therapeutic functions have been developed to significantly improve the anticancer effect of HCPT. In this paper, we collected reports on HCPT nanomedicines against tumors in the past decade. Based on current research advances, we dissected the current status and limitations of HCPT nanomedicines development and looked forward to future research directions.

Supercritical Fluid-Assisted Fabrication of PDA-Coated Poly (l-lactic Acid)/Curcumin Microparticles for Chemo-Photothermal Therapy of Osteosarcoma

After traditional osteosarcoma resection, recurrence of tumor is still a major clinical challenge. The combination of chemotherapy and photothermal therapy (PTT) has great potential in improving therapeutic effect. However, the studies using polydopamine (PDA) as photothermal transducing agent to improve the anti-cancer activity of curcumin (CM)-loaded poly (l-lactic acid) (PLLA) microparticles (PLLA/CM) have seldom been investigated. In this study, we reported the synthesis of PDA-coated PLLA/CM microparticles (PDA-PLLA/CM) prepared by PDA coating on the surface of the PLLA/CM microparticles fabricated by solution-enhanced dispersion by supercritical CO2 (SEDS) for chemo-photothermal therapy of osteosarcoma. The average particle sizes of PLLA/CM and PDA-PLLA/CM microparticles with a spherical shape were (802.6 ± 8.0) nm and (942.5 ± 39.5) nm, respectively. PDA-PLLA/CM microparticles exhibited pH- and near-infrared (NIR)-responsive release behavior to promote CM release in the drug delivery system. Moreover, PDA-PLLA/CM microparticles displayed good photothermal conversion ability and photothermal stability attributed to PDA coating. Additionally, the results of in vitro anti-cancer experiment showed that 500 μg/mL PDA-PLLA/CM microparticles had good anti-cancer effect on MG-63 cells and no obvious toxicity to MC3T3-E1 cells. After incubation with PDA-PLLA/CM microparticles for 2 days, NIR irradiation treatment improved the anti-cancer activity of PDA-PLLA/CM microparticles obviously and reduced the cell viability of osteosarcoma from 47.4% to 20.6%. These results indicated that PDA-PLLA/CM microparticles possessed a synergetic chemo-photothermal therapy for osteosarcoma. Therefore, this study demonstrated that PDA-PLLA/CM microparticles may be an excellent drug delivery platform for chemo-photothermal therapy of tumors.

Nanostructured lipid carriers: a promising drug carrier for targeting brain tumours

Background

In recent years, the field of nanotechnology and nanomedicine has transformed the pharmaceutical industry with the development of novel drug delivery systems that overcome the shortcomings of traditional drug delivery systems. Nanostructured lipid carriers (NLCs), also known as the second-generation lipid nanocarriers, are one such efficient and targeted drug delivery system that has gained immense attention all across due to their myriad advantages and applications. Scientific advancements have revolutionized our health system, but still, brain diseases like brain tumour have remained formidable owing to poor prognosis and the challenging drug delivery to the brain tissue. In this review, we highlighted the application and potential of NLCs in brain-specific delivery of chemotherapeutic agents.

Main body

NLCs are lipid-based formulations with a solid matrix at room temperature and offer advantages like enhanced stability, low toxicity, increased shelf life, improved drug loading capacity, and biocompatibility over other conventional lipid-based nanocarriers such as nanoemulsions and solid lipid nanoparticles. This review meticulously articulates the structure, classification, components, and various methods of preparation exemplified with various research studies along with their advantages and disadvantages. The concept of drug loading and release has been discussed followed by a brief about stability and strategies to improve stability of NLCs. The review also summarizes various in vitro and in vivo research studies on NLCs encapsulated with cytotoxic drugs and their potential application in brain-specific drug delivery.

Conclusion

NLCs are employed as an important carrier for the delivery of food, cosmetics, and medicines and recently have been used in brain targeting, cancer, and gene therapy. However, in this review, the applications and importance of NLCs in targeting brain tumour have been discussed in detail stating examples of various research studies conducted in recent years. In addition, to shed light on the promising role of NLCs, the current clinical status of NLCs has also been summarized.

Graphical Abstract

Evaluation of Metformin Hydrochloride Tailoring Bilosomes as an Effective Transdermal Nanocarrier

Introduction

Metformin hydrochloride (metformin HCL), a first-line drug treating diabetes type II, was known to cause severe gastritis, so seeking a non-oral dosage form was the new trend. Bilosomes are bilayer nano-vesicles of non-ionic surfactants embodying bile salts. In our study, bilosomes were investigated as an acceptable novel carrier for active targeting transdermal delivery of metformin HCL, circumventing its side effects.

Methods

Twelve bilosome formulations were prepared with solvent evaporation method with slight modification according to a 3¹.2² full factorial design, and the optimized formulation was determined using Design -Expert 13 software (Stat-Ease, Inc., Minneapolis, Minnesota, USA) studying the effect of surfactant and bile salt types on the entrapment efficiency (EE), vesicle size (VS), polydispersity index (PDI), zeta potential (ZP), percentage of drug released within 24 h (R), and flux of drug permeated within 6 h (Jss) of vesicles. In addition, the optimized formulation was further evaluated to Fourier-transform infrared spectroscopy (FTIR), deformability index (DI), and transmission electron microscope (TEM) to ensure bilosomes formation, elasticity, and spherical shape, respectively.

Results

The resulting vesicles publicized EE from 56.21% to 94.21%, VS from 183.64 to 701.8 nm, PDI values oscillating between 0.33 and 0.53, ZP (absolute value) from 29 to 44.2 mV, biphasic release profile within 24 h from 60.62 and up to 75.28%, and permeation flux enhancement (198.79–431.91 ng cm ⁻² h⁻¹) in comparison with the non-formulated drug (154.26 ng cm ⁻² h⁻¹). Optimized formulation was found to be F8 with EE = 79.49%, VS = 237.68 nm, ZP = 40.9 mV, PDI = 0.325, R = 75.28%, Jss = 333.45 ng cm⁻² h⁻¹ and DI = 6.5 with spherical self-closed non-aggregated vesicles and non-superimposed bands of its components in the FTIR.

Conclusion

Overall results showed that bilosome incorporation of metformin HCL improved permeation and offered a new nano-carrier for active transdermal delivery.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/a-_3Fxhau2E

Promising Strategies of Colloidal Drug Delivery-Based Approaches in Psoriasis Management

Psoriasis is a chronic inflammatory autoimmune disorder that moderately affects social and interpersonal relationships. Conventional treatments for psoriasis have certain problems, such as poor drug penetration through the skin, hyper-pigmentation, and a burning sensation on normal and diseased skin. Colloidal drug delivery systems overcome the pitfalls of conventional approaches for psoriasis therapeutics and have improved patient safety parameters, compliance, and superior effectiveness. They also entail reduced toxicity. This comprehensive review’s topics include the pathogenesis of psoriasis, causes and types of psoriasis, conventional treatment alternatives for psoriasis, the need for colloidal drug delivery systems, and recent studies in colloidal drug delivery systems for the treatment of psoriasis. This review briefly describes colloidal drug delivery approaches, such as emulsion systems—i.e., multiple emulsion, microemulsion, and nano-emulsion; vesicular systems—i.e., liposomes, ethosomes, noisomes, and transferosomes; and particulate systems—i.e., solid lipid nanoparticles, solid lipid microparticles, nano-structured lipid carriers, dendrimers, nanocrystals, polymeric nanoparticles, and gold nanoparticles. The review was compiled through an extensive search of the literature through the PubMed, Google Scholar, and ScienceDirect databases. A survey of literature revealed seven formulations based upon emulsion systems, six vesicular drug delivery systems, and fourteen particulate systems reported for antipsoriatic drugs. Based on the literature studies of colloidal approaches for psoriasis management carried out in recent years, it has been concluded that colloidal pharmaceutical formulations could be investigated broadly and have a broad scope for effective management of many skin disorders in the coming decades.

Formulation and Optimization of Butenafine-Loaded Topical Nano Lipid Carrier-Based Gel: Characterization, Irritation Study, and Anti-Fungal Activity

The present study aims to prepare and optimize butenafine hydrochloride NLCs formulation using solid and liquid lipid. The optimized selected BF-NLCopt was further converted into Carbopol-based gel for topical application for the treatment of fungal infection. Box Behnken design was employed to optimize the nanostructure lipids carriers (NLCs) using the lipid content (A), Tween 80 (B), and homogenization cycle (C) as formulation factors at three levels. Their effects were observed on the particle size (Y1) and entrapment efficiency (Y2). The selected formulation was converted into gel and further assessed for gel characterization, drug release, anti-fungal study, irritation study, and stability study. The solid lipid (Compritol 888 ATO), liquid lipid (Labrasol), and surfactant (tween 80) were selected based on maximum solubility. The optimization result showed a particle size of 111 nm with high entrapment efficiency of 86.35% for BF-NLCopt. The optimized BF-NLCopt converted to gel (1% w/v, Carbopol 934) and showed ideal gel evaluation results (drug content 99.45 ± 2.11, pH 6.5 ± 0.2, viscosity 519 ± 1.43 CPs). The drug release study result depicted a prolonged drug release (65.09 ± 4.37%) with high drug permeation 641.37 ± 46.59 µg (32.07 ± 2.32%) than BF conventional gel. The low value of irritation score (0.17) exhibited negligible irritation on the skin after application. The anti-fungal result showed greater efficacy than the BF gel at both time points. The overall conclusion of the results revealed NLCs-based gel of BF as an ideal delivery system to treat the fungal infection.

The Effects of Solid and Liquid Lipids on the Physicochemical Properties of Nanostructured Lipid Carriers

The aim of this work was to identify from a review of current literature the effects of lipids used in the development of Nanostructured Lipid Carriers (NLCs) on the physicochemical properties of the resulting formulation. The size of the solid lipid, affected by the molecular weight and the complexity of the structure, tends to affect the particle size of the final formulation proportionally; the higher the molecular weight and the more complex the molecular structure, the bigger the particle size of the NLCs. However, there is no straight correlation between the size and the structure of the liquid lipid and the particle size. Moreover, there seems to be a correlation of the solid to liquid lipid ratio which affects the particle size; there has been a trend of increasing particle size when more solid lipid was used. Regarding the entrapment efficiency, it is highly affected by the drug and its interaction with the lipids, as its solubility in the lipids needs to be high so the drug can stay entrapped within the lipid core. There was no direct correlation between the type of lipid used or the ratio and the zeta potential, which affects the stability of the NLCs.

Current strategies for oral delivery of BCS IV drug nanocrystals: challenges, solutions and future trends

INTRODUCTION

Oral absorption of BCS IV drug benefits little from improved dissolution. Therefore, the absorption of BCS IV drug nanocrystals 'as a whole' strategy is preferred, and structural modification of nanocrystals is required. Surface modification helps the nanocrystals maintain particle structure before drug dissolution is needed, thus enhancing the oral absorption of BCS IV drugs and promoting therapeutic effect. Here, the main challenges and solutions of oral BCS IV drug nanocrystals delivery are discussed. Moreover, strategies for nanocrystal surface modification that facilitates oral bioavailability of BCS IV drugs are highlighted, and provide insights for the innovation in oral drug delivery.

AREAS COVERED

Promising size, shape, and surface modification of nanocrystals have gained interests for application in oral BCS IV drugs.

EXPERT OPINION

Nanocrystal surface modification is a feasible method to maintain the structural integrity of nanocrystals, and the introduced materials can also be modified to integrate additional functions to further facilitate the absorption of nanocrystals. It is expected that the absorption 'as a whole' strategy of nanocrystals will provide different choices for the oral BCS IV drugs.

Evaluation and Comparison of Solid Lipid Nanoparticles (SLNs) and Nanostructured Lipid Carriers (NLCs) as Vectors to Develop Hydrochlorothiazide Effective and Safe Pediatric Oral Liquid Formulations

The aim of this study was the optimization of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) in terms of physicochemical and biopharmaceutical properties, to develop effective and stable aqueous liquid formulations of hydrochlorothiazide, suitable for paediatric therapy, overcoming its low-solubility and poor-stability problems. Based on solubility studies, Precirol® ATO5 and Transcutol® HP were used as solid and liquid lipids, respectively. The effect of different surfactants, also in different combinations and at different amounts, on particle size, homogeneity and surface-charge of nanoparticles was carefully investigated. The best formulations were selected for drug loading, and evaluated also for entrapment efficiency and release behaviour. For both SLN and NLC series, the use of Gelucire® 44/14 as surfactant rather than PluronicF68 or Tween® 80 yielded a marked particle size reduction (95-75 nm compared to around 600-400 nm), and an improvement in entrapment efficiency and drug release rate. NLC showed a better performance than SLN, reaching about 90% entrapped drug (vs. 80%) and more than 90% drug released after 300 min (vs. about 65%). All selected formulations showed good physical stability during 6-month storage at 4 °C, but a higher loss of encapsulated drug was found for SLNs (15%) than for NLCs (<5%). Moreover, all selected formulations revealed the absence of any cytotoxic effect, as assessed by a cell-viability test on Caco-2 cells and are able to pass the intestinal epithelium as suggested by Caco-2 uptake experiments.

Ezetimibe-Loaded Nanostructured Lipid Carrier Based Formulation Ameliorates Hyperlipidaemia in an Experimental Model of High Fat Diet

Ezetimibe (EZE) possesses low aqueous solubility and poor bioavailability and in addition, its extensive hepatic metabolism supports the notion of developing a novel carrier system for EZE. Ezetimibe was encapsulated into nanostructured lipid carriers (EZE-NLCs) via a high pressure homogenization technique (HPH). A three factor, two level (2³) full factorial design was employed to study the effect of amount of poloxamer 188 (X1), pressure of HPH (X2) and number of HPH cycle (X3) on dependent variables. Particle size, polydispersity index (PDI), % entrapment efficiency (%EE), zeta potential, drug content and in-vitro drug release were evaluated. The optimized formulation displays pragmatic inferences associated with particle size of 134.5 nm; polydispersity index (PDI) of 0.244 ± 0.03; zeta potential of −28.1 ± 0.3 mV; % EE of 91.32 ± 1.8% and % CDR at 24-h of 97.11%. No interaction was observed after X-ray diffraction (XRD) and differential scanning calorimetry (DSC) studies. EZE-NLCs (6 mg/kg/day p.o.) were evaluated in the high fat diet fed rats induced hyperlipidemia in comparison with EZE (10 mg/kg/day p.o.). Triglyceride, HDL-c, LDL-c and cholesterol were significantly normalized and histopathological evaluation showed normal structure and architecture of the hepatocytes. The results demonstrated the superiority of EZE-NLCs in regard to bioavailability enhancement, dose reduction and dose-dependent side effects.

Preparation, characterization, and in vivo evaluation of perphenazine-loaded nanostructured lipid carriers for oral bioavailability improvement

OBJECTIVE

The main scope of the present investigation was to improve the bioavailability of perphenazine (PPZ) by incorporating it into the nanostructured lipid carriers (NLCs).

SIGNIFICANCE

As a result of lipophilic nature and poor aqueous solubility, as well as extensive hepatic metabolism, PPZ has low systemic bioavailability via the oral route. NLCs have shown potentials to surmount the oral delivery drawbacks of poorly water-soluble drugs.

METHODS

The PPZ-NLCs were prepared by the emulsification-solvent evaporation method and subjected for particle size, zeta potential, and entrapment efficiency (EE) analysis. The optimized NLCs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffractometry (PXRD). Besides, in vitro release behavior, storage stability, and pharmacokinetic studies followed by a single-dose oral administration in rats were performed.

RESULTS

Optimized PPZ-NLCs showed a particle size of less than 180 nm with appropriate EE of more than 95%. Microscopic images captured with SEM and TEM exhibited that NLCs were approximately spherical in shape. DSC and PXRD analysis confirmed reduced crystallinity of PPZ after incorporation in NLCs. FTIR spectra demonstrated no chemical interactions between PPZ and NLC components. In vitro release studies confirmed the extended-release properties of NLC formulations. PPZ-NLCs exhibited good stability at 4 °C within three months. The oral bioavailability of NLC-6 and NLC-12 was enhanced about 3.12- and 2.49-fold, respectively, compared to the plain drug suspension.

CONCLUSION

NLC can be designated as an effective nanocarrier for oral delivery of PPZ.

Bioactive Apigenin loaded oral nano bilosomes: Formulation optimization to preclinical assessment

AIM

Diabetic (type-2) is a metabolic disease characterized by increased blood glucose level from the normal level. In the present study, apigenin (AG) loaded lipid vesicles (bilosomes: BIL) was prepared, optimized and evaluated for the oral therapeutic efficacy.

EXPERIMENTAL

AG-BIL was prepared by a thin-film evaporation method using cholesterol, span 60 and sodium deoxycholate. The prepared formulation was optimized by 3-factor and 3-level Box-Behnken design using particle size, entrapment efficiency and drug release as a response. The selected formulation further evaluated for ex-vivo permeation, in vivo pharmacokinetic and pharmacodynamics study.

RESULTS

The optimized AG bilosomes (AG-BILopt) has shown the vesicle size 183.25 ± 2.43 nm, entrapment efficiency 81.67 ± 4.87%. TEM image showed a spherical shape vesicle with sharp boundaries. The drug release study revealed a significant enhancement in AG release (79.45 ± 4.18%) from AG-BILopt as compared to free AG-dispersion (25.47 ± 3.64%). The permeation and pharmacokinetic studies result revealed 4.49 times higher flux and 4.67 folds higher AUC0-t than free AG-dispersion. The antidiabetic activity results showed significant (P < 0.05) enhancement in therapeutic efficacy than free AG-dispersion. The results also showed marked improvement in biochemical parameters.

CONCLUSION

Our findings suggested, the prepared apigenin loaded bilosomes was found to be an efficient delivery in the therapeutic efficacy in diabetes.

Optimization of Tilmicosin-Loaded Nanostructured Lipid Carriers Using Orthogonal Design for Overcoming Oral Administration Obstacle

Tilmicosin (TMS) is widely used to treat bacterial infections in veterinary medicine, but the clinical effect is limited by its poor solubility, bitterness, gastric instability, and intestinal efflux transport. Nanostructured lipid carriers (NLCs) are nowadays considered to be a promising vector of therapeutic drugs for oral administration. In this study, an orthogonal experimental design was applied for optimizing TMS-loaded NLCs (TMS-NLCs). The ratios of emulsifier to mixed lipids, stearic acid to oleic acid, drugs to mixed lipids, and cold water to hot emulsion were selected as the independent variables, while the hydrodynamic diameter (HD), drug loading (DL), and entrapment efficiency (EE) were the chosen responses. The optimized TMS-NLCs had a small HD, high DL, and EE of 276.85 ± 2.62 nm, 9.14 ± 0.04%, and 92.92 ± 0.42%, respectively. In addition, a low polydispersity index (0.231 ± 0.001) and high negative zeta potential (-31.10 ± 0.00 mV) indicated the excellent stability, which was further demonstrated by uniformly dispersed spherical nanoparticles under transmission electron microscopy. TMS-NLCs exhibited a slow and sustained release behavior in both simulated gastric juice and intestinal fluid. Furthermore, MDCK-chAbcg2/Abcb1 cell monolayers were successfully established to evaluate their absorption efficiency and potential mechanism. The results of biodirectional transport showed that TMS-NLCs could enhance the cellular uptake and inhibit the efflux function of drug transporters against TMS in MDCK-chAbcg2/Abcb1 cells. Moreover, the data revealed that TMS-NLCs could enter the cells mainly via the caveolae/lipid raft-mediated endocytosis and partially via macropinocytosis. Furthermore, TMS-NLCs showed the same antibacterial activity as free TMS. Taken together, the optimized NLCs were the promising oral delivery carrier for overcoming oral administration obstacle of TMS.

Fabrication and Evaluation of Spironolactone-Loaded Nanostructured Lipid Carries for Cardiac Tissue Regeneration

Background:

Spironolactone (SP) is a lipophilic aldosterone receptor antagonist that few studies have reported its effect on cardiac remodeling. In addition, fewer researches have considered its influence on cardiomyocyte viability and potential benefits for myocardial tissue remodeling.

Method:

In this study, stearic acid (SA) (solid lipid) and oleic acid (OA) (liquid lipid) were utilized to produce nanostructured lipid carries (NLCs) (various ratios of SA to OA and water amount, F1: 80:20 [30 ml water], F2: 80:20 [60 ml water], F3: 70:30 [30 ml water], and F4: 70:30 [60 ml water]) containing SP and their particle size, polydispersity index, zeta potential, entrapment efficiency, and release profile were measured. The purpose of encapsulating SP in NLCs was to provide a sustain release system. Meanwhile, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay with different concentrations of SP-loaded NLCs (SP-NLCs) was conducted to evaluate the cytotoxicity of the NLCs on rat myocardium cells (H9C2).

Results:

Increase of oil content to 10 wt% reduced the particle size from 486 nm (F1) to 205 nm (F2). Zeta potential of the samples at around −10 mV indicated their agglomeration tendency. After 48 h, SP-NLCs with the concentrations of 5 and 25 μM showed significant improvement in cell viability while the same amount of free SP-induced cytotoxic effect on the cells. SP-NLCs with higher concentration (50 μM) depicted cytotoxic effect on H9C2 cells.

Conclusion:

It can be concluded that 25 μM SP-NLCs with sustain release profile had a beneficial effect on cardiomyocytes and can be used as a mean to improve cardiac tissue regeneration.

Tailoring lipid nanoconstructs for the oral delivery of paliperidone: Formulation, optimization and in vitro evaluation

PURPOSE

The present research work involves Quality by Design (QbD)-based fabrication of lipid nanoconstructs (LNC) of paliperidone (PPD) bearing superior biopharmaceutical attributes.

METHODS

LNC of paliperidone was prepared by melt emulsification-probe sonication and high-pressure homogenization method followed by optimization using QbD approach. Preparing LNC by both these methods will give the benefit of identifying the best optimized formulation which will be further evaluated for in vitro studies.

RESULTS

The best optimized formulation was obtained using melt emulsification-probe sonication technique with small particle size (86.35 nm), high entrapment efficiency (90.07 %), and high loading capacity (8.49 %). The drug release from LNC was found to be 5, 8, and 9-folds greater than drug suspension in pH 1.2, 6.8, and 7.4 respectively (p < 0.001). Stability studies of LNC in simulated gastric fluid pH 1.2 and fasted state simulated intestinal fluid depicted no alteration in particle size and polydispersity index of LNC but were found to increase in fed state simulated intestinal fluid. The drug permeability through rat intestine for LNC was found to be approximately 6-folds (p < 0.05) greater as compared to the drug suspension which was further confirmed by confocal microscopy. The in vitro lipolysis study presented significantly highest solubilization (p < 0.001) in the aqueous phase thereby anticipating higher in vivo absorption.

CONCLUSION

Thus, it was concluded that LNC bears the knack of improving the solubilization and permeation potential of an otherwise hydrophobic drug, paliperidone."

Improved Transmucosal Delivery of Glimepiride via Unidirectional Release Buccal Film Loaded With Vitamin E TPGS-Based Nanocarrier

Glimepiride (GMD) is a hypoglycemic agent that has variation in bioavailability for its unexpected absorption. Glimepiride was formulated in a buccal film loaded with a nanobased formulation to enhance its absorption via buccal mucosa. Nanostructured lipid carriers (NLCs) and d-α-tocopherol polyethylene glycol 1000 succinate-based micelles enhance GMD solubility and improve its permeation through the buccal mucosa. The formulation variables were optimized using a Box-Behnken design. These factors, such as the percent of micelles relative to NLC (X₁), the percent of Carbopol (X₂), and the percent of permeation enhancer (X₃), were investigated for their effect on the initial release (Y₁) and the cumulative release after 6 hours (Y₂). The optimum levels for X₁, X₂, and X₃ were 100%, 0.05%, and 1.8%, respectively. The optimized formulation revealed that the permeation of GMD from the film was in favor of micelles. This optimized film was then coated with ethyl cellulose to direct the release only through the buccal mucosa. The optimized unidirectional GMD transmucosal film showed a release of 93.9% of GMD content at 6 hours compared to 60.41% of GMD release from the raw GMD film. This finding confirmed the suitability of transmucosal delivery of GMD via the buccal mucosa.

Optimized Nanostructured Lipid Carriers Integrated into In Situ Nasal Gel for Enhancing Brain Delivery of Flibanserin

Background and Aim

Flibanserin (FLB) is a multifunctional serotonergic agent used for treating hypoactive sexual desire disorder in premenopausal women via oral administration. FLB has a reported limited oral bioavailability of 33% that could be attributed to the drug’s first-pass metabolism. In addition, FLB has a pH-dependent solubility that could be a challenging factor for drug dissolution in the body neutral fluid, and consequently, absorption via mucosal barriers. Thus, this work aims at investigating the potential of utilizing nanostructured lipid carriers (NLCs) to overcome the aforementioned drawbacks and to enhance nose-to-brain drug delivery.

Methods

Box-Behnken design was applied to explore the impact of solid lipid % (SL%, X₁), liquid lipid % (LL%, X₂), and sonication time (ST, X₃) on particle size. The optimized NLC formulation was characterized and incorporated into gellan gum in situ gel. The prepared gel was subjected to in vitro drug release, in vivo pharmacokinetic performance, and histopathological assessment in rats.

Results

Statistical analysis revealed a significant negative effect for both SL% and ST on NLCs size. In contrast, a significant positive effect was observed for the LL%. The optimized formulation showed spherical shape with vesicular size of 114.63 nm. The optimized FLB-NLC in situ gel exhibited adequate stability and enhanced in vitro release compared to raw FLB control gel. The plasma and brain concentrations of the drug after nasal administration in rats increased by more than 3–6-fold, respectively, compared to raw FLB in situ gel. In addition, the histopathological studies revealed the absence of any pathological signs.

Conclusion

The aforementioned results highlight the safety of FLB-NLC in situ nasal gel and its potential to improve the drug bioavailability and brain delivery.

Amphotericin B loaded ethyl cellulose nanoparticles with magnified oral bioavailability for safe and effective treatment of fungal infection

Amphotericin B is a gold standard drug used in various fungal and parasitic infection treatment. Most of the marketed formulations are administered intravenously, but show dose-dependent adverse effects i.e., nephrotoxicity and hemolysis. Oral route eliminates the toxic concern but exhibits poor bioavailability. Therefore, ethylcellulose nanoparticles (EC-NPs) have been used for magnified oral delivery of AmB, where EC provides gastrointestinal stability. These nanoparticles were synthesized by high-pressure emulsification solvent evaporation (HPESE) method and evaluated for in vitro and in vivo studies. This method yields small, monodisperse AmB-EC-NPs along with smooth surface morphology and improved encapsulation efficiency. The developed formulation showed a sustained release pattern following Higuchi diffusion kinetics along with gastric and storage stability. Aggregation study revealed that AmB was present in its monomeric form inside the biocompatible EC matrix. The antifungal result demonstrated that the MIC of AmB-EC-NPs was reduced ∼1/3rd than AmB and Fungizone® at 24 h whereas it was observed ∼1/8th at 48 h. in vivo pharmacokinetic analysis demonstrated 1.3-fold higher AUC than Fungizone® even at a 4.5-time lesser dose via the oral route and a ∼15-fold rise in the bioavailability in contrast to the native AmB. The hemolytic study revealed that the developed formulation exhibited 8-fold lesser hemolysis than Fungizone®. Furthermore, the biosafety profile of AmB-EC-NPs was ensured by the significantly lesser level of blood urea nitrogen and plasma creatinine along with the normal pattern of renal tubules in comparison to AmB and Fungizone®. In conclusion, the results stipulated that the AmB-EC-NPs could be effective, viable and a better alternative to currently existing iv formulations, for magnified oral delivery of AmB in the treatment of fungal infection without associated adverse effects.

Pumpkin Oil-Based Nanostructured Lipid Carrier System for Antiulcer Effect in NSAID-Induced Gastric Ulcer Model in Rats

Background

Peptic ulcer disease, a painful lesion of the gastric mucosa, is considered one of the most common gastrointestinal disorders. This study aims to investigate the formulation of pumpkin seed oil (PSO)-based nanostructured lipid carriers (NLCs) to utilize PSO as the liquid lipid component of NLCs and to achieve oil dispersion in the nano-range in the stomach.

Methods

Box–Behnken design was utilized to deduce the optimum formula with minimum particle size. The optimized PSO-NLCs formula was investigated for gastric ulcer protective effects in Wistar rats by evaluating ulcer index and determination of gastric mucosa oxidative stress parameters.

Results

PSO was successfully incorporated as the liquid lipid (LL) component of NLCs. The prepared optimum PSO-NLCs formula showed a size of 64.3 nm. Pretreatment of animals using the optimized PSO-NLCs formula showed significantly (p< 0.001) lower ulcer index compared to indomethacin alone group and significantly (p<0.05) less mucosal lesions compared to the raw oil.

Conclusion

These results indicated great potential for future application of optimized PSO-NLCs formula for antiulcer effect in non-steroidal anti-inflammatory drug (NSAID)-induced gastric ulcer.

Synthesis of Tilmicosin Nanostructured Lipid Carriers for Improved Oral Delivery in Broilers: Physiochemical Characterization and Cellular Permeation

This study aimed to develop nanostructured lipid carriers (NLCs) for improved oral absorption of tilmicosin (TMS) in broilers. Thus, palmitic acid, lauric acid, and stearic acid were selected as solid lipids to formulate TMS-pNLCs, TMS-lNLCs, and TMS-sNLCs, respectively. They showed similar physicochemical properties and meanwhile possessed excellent storage and gastrointestinal stability. The TMS interacted with the lipid matrix and was encapsulated efficiently in NLCs in an amorphous structure. NLCs could enhance oral absorption of TMS compared to 10% tilmicosin phosphate solution in broilers, among which the TMS-sNLCs were the most efficient drug delivery carriers, with a relative oral bioavailability of 203.55%. NLCs could inhibit the efflux of P-glycoprotein (P-pg) toward TMS, which may be involved with improved oral absorption. Taken together, these types of solid lipids influenced the enhanced level of NLCs toward oral bioavailability of TMS, and the sNLCs proved to be the most promising oral delivery carriers of TMS.

Nanostructured lipid carriers with exceptional gastrointestinal stability and inhibition of P-gp efflux for improved oral delivery of tilmicosin

Tilmicosin (TMS) is widely applied to treat porcine bacterial respiratory diseases in veterinary medicine. However, oral administration of TMS is greatly limited due to its physicochemical properties, such as poor water solubility, gastric acid sensitivity and bitterness. Therefore, nanostructured lipid carriers (NLCs) were developed as an oral delivery system for TMS by the high shear method combined with ultrasonic techniques in this study. The results showed that TMS-NLCs were approximately spherical with a hydrodynamic diameter of 283.03 nm and a zeta potential of -30.04 mV. TMS was almost entirely encapsulated in the NLCs by interacting with the lipid matrix, as characterized by differential scanning calorimetry and fourier transform infrared spectroscopy. Thus, TMS-NLCs had an excellent encapsulation efficiency and loading capacity with values of 93.46% and 9.23%, respectively. TMS-NLCs maintained good stability not only during storage at 4 ℃, 25 ℃ and 40 ℃ for 90 days but also in stimulated gastrointestinal (GI) fluids at 37 ℃ for 7 days. Therefore, TMS-NLCs displayed low and sustained release in vitro without an initial burst release in stimulated GI fluids. Furthermore, TMS-NLCs showed higher oral bioavailability in piglets compared to the API suspension. Subsequently, Caco-2 cell monolayers were utilized to analyze the mechanism of NLC-enhanced oral adsorption of TMS. The data revealed that NLCs not only increased cellular uptake of TMS but also inhibited the efflux of P-gp in Caco-2 cells. Additionally, TMS-NLCs mainly entered Caco-2 cells via the caveolae/lipid raft-mediated endocytosis pathway. Moreover, nanoparticles were transported across Caco-2 cell monolayers in the intact form to the basolateral side, as identified by transmission electron microscopy, indicating that TMS-NLCs escape lysosome degradation. Taken together, these results indicate that NLCs are a potential delivery carrier for improving the solubility, permeability and oral bioavailability of TMS.

Repaglinide-loaded nanostructured lipid carriers with different particle sizes for improving oral absorption: preparation, characterization, pharmacokinetics, and in situ intestinal perfusion

Repaglinide-loaded nanostructured lipid carriers (REP-NLCs) with different particle sizes were successfully designed and prepared to investigate the permeation and absorption ability by in situ single-pass intestinal perfusion (SPIP) study and pharmacokinetics. Both of the formulations prepared by solvent diffusion method exhibited a spherical shape under transmission electron microscopy (TEM) and similar zeta potential value of –11 mV. The particles size, encapsulation efficiency (EE), drug loading (DL) of REP-NLCs-Small and REP-NLCs-Large size preparations were about 79 nm and 325 nm, 96.83% and 98.60%, 4.41% and 3.05%, respectively. Besides, both REP-NLCs showed good colloidal stability and had no burst release phenomenon compared with REP-Sol. SPIP demonstrated the improved membrane permeability for NLCs compared with REP-Sol, especially NLCs-Small size preparation. The bioavailability increased sequentially in REP-Sol, REP-NLCs-Large, and REP-NLCs-Small, and the difference between each other was statistical significant. Our investigations demonstrate that NLCs with small particles size of 50–100 nm, such as 79 nm, are able to enhance absorption performance of a poorly soluble repaglinide compared with large particles size, such as 325 nm, by significantly improving the absorption in jejunum, and colon of rats and thus well improving oral bioavailability.

Preparation and Pharmacokinetic Study of Daidzein Long-Circulating Liposomes

In this study, daidzein long-circulating liposomes (DLCL) were prepared using the ultrasonication and lipid film-hydration method. The optimized preparation conditions by the orthogonal design was as follows: 55 to 40 for the molar ratio of soybean phosphatidylcholine (SPC) to cholesterol, 1 to 10 for the mass ratio of daidzein to total lipid (SPC and cholesterol) (w:w), the indicated concentration of 5% DSPE-mPEG2000 (w:w), 50 °C for the hydration temperature, and 24 min for the ultrasonic time. Under these conditions, the encapsulation efficiency and drug loading of DLCL were 85.3 ± 3.6% and 8.2 ± 1.4%, respectively. The complete release times of DLCL in the medium of pH 1.2 and pH 6.9 increased by four- and twofold of that of free drugs, respectively. After rats were orally administered, a single dose of daidzein (30 mg/kg) and DLCL (containing equal dose of daidzein), respectively, and the MRT_0-t (mean residence time, which is the time required for the elimination of 63.2% of drug in the body), t_1/2 (the elimination half-life, which is the time required to halve the plasma drug concentration of the terminal phase), and AUC_0-t (the area under the plasma drug concentration-time curve, which represents the total absorption after a single dose and reflects the drug absorption degree) of daidzein in DLCL group, increased by 1.6-, 1.8- and 2.5-fold as compared with those in the free group daidzein. Our results indicated that DLCL could not only reduce the first-pass effect of daidzein to promote its oral absorption, but also prolong its mean resident time to achieve the slow-release effect.

Formulation approaches for improved retinoids delivery in the treatment of several pathologies

Retinoid acid (RA) and other retinoids are extensively used as therapeutic agents in the treatment of several types of cancer and skin disorders. However, the efficiency of these medical agents is compromised due to the unsatisfactory concentration of retinoids in the target cells/tissues. Furthermore, severe side-effects are related to retinoids administration. Incorporation of retinoids into carrier-based delivery systems using encapsulation technology has been proposed in order to overcome the limitations of using free retinoids in the treatment of several pathologies. The present work starts exploring the competences and the difficulties of using retinoids in health care. The metabolism and the main considerations about the mechanism of action of retinoids are also discussed. The final sections are focused on the most recent studies about RA controlled delivery systems to be used in the medical field.

Lipid-based nano delivery of antimicrobials to control food-borne bacteria

Direct application of antibacterial agents into foods gives limited advantages because bioactive ingredients may be partially inactivated, neutralized, or easily diffused when contacting with the food matrix. Hence, the aim of this study is to investigate the application of lipid-based nanocarriers as delivery systems for antibacterial ingredients. In this regard, several types of these carriers such as nanoliposomes, nanoemulsions, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs) are explored. This study seeks to cover the important challenges of lipid-based nanocarriers including structures and characteristics, properties, production methods, advantages and drawbacks, and their applications to encapsulate antibacterial compounds effectively, particularly in food systems. However, for more scrutiny inspection of the functionality of lipid-based nanocarriers, we have gathered and discussed the studies related to the antibiotic-loaded lipid-based nanoparticles. Also, the role of such nanocarriers in active packaging systems when combining with edible coatings or films is discussed.

Preparation and characterization of Alendronate depot microspheres based on novel poly(-ε-caprolactone)/Vitamin E TPGS copolymers

In the present study, new aledronate (AL) loaded microspheres were prepared with the use of polycaprolactone (PCL)/Vitamin E d-ɑ-tocopheryl poly(ethylene glycol) 1000 succinate (TPGS) copolymers. Specifically, PCL-TPGS copolymers, prepared at several PCL to TPGS ratios (namely, 90/10, 80/20, 70/30 and 60/40 w/w) via a ring opening polymerization process, were characterized by intrinsic viscosity, proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and enzymatic hydrolysis. Results showed that as TPGS content increases the intrinsic viscosity of the copolymer (and hence, the viscosity-average molecular weight) is decreasing, while FTIR analysis showed the formation of hydrogen bonds between the —C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O of PCL and the —OH of TPGS. Additionally, XRD analysis indicated that the prepared copolymers were semi-crystalline in nature, while enzymatic hydrolysis studies showed that increasing TGPS content led to increasing copolymer hydrolysis. In the following step, AL drug-loaded microspheres were prepared via single emulsification process. Scanning electron microscopy (SEM) revealed the formation of coarse drug-loaded microspheres with particle size close to 5 μm, while XRD analysis showed that the API was amorphously dispersed only in the cases of high TPGS content. Furthermore, FTIR analysis showed that the API did not interact with the copolymer components, while in vitro drug release studies showed that increasing PCL content led to decreasing API release rate. Finally, analysis of the drug release profiles suggested that the API release mechanism was solely governed by the polymer matrix erosion.

Nanocarrier-based systems for targeted and site specific therapeutic delivery

Systemic drug delivery methods such as oral or parenteral administration of free drugs possess relatively low treatment efficiency and marked adverse side effects. The use of nanoparticles for drug delivery in most cases substantially enhances drug efficacy, improves pharmacokinetics and drug release and limits their side effects. However, further enhancement in drug efficacy and significant limitation of adverse side effects can be achieved by specific targeting of nanocarrier-based delivery systems especially in combination with local administration. The present review describes major advantages and limitations of organic and inorganic nanocarriers or living cell-based drug and nucleic acid delivery systems. Among these, different nanoparticles, supramolecular gels, therapeutic cells as living drug carriers etc. have emerged as a new frontier in modern medicine.

Potential of Lipid Nanoparticles (SLNs and NLCs) in Enhancing Oral Bioavailability of Drugs with Poor Intestinal Permeability

Lipid-based drug delivery systems has become a popular choice for oral delivery of lipophilic drugs with dissolution rate limited oral absorption. Lipids are known to enhance oral bioavailability of poorly water-soluble drugs in multiple ways like facilitating dissolution as micellar solution, enhancing the lymphatic uptake and acting as inhibitors of efflux transporters. Lipid nanoparticles are matrix type lipid-based carrier systems which can effectively encapsulate both lipophilic and hydrophilic drugs. Lipid nanoparticles namely solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) are versatile drug delivery system and can be used for multiple routes of delivery like parenteral, topical, ocular, transdermal, and oral. Lipid nanoparticles are particularly attractive vehicles for peroral delivery of drugs with oral bioavailability problems as they are composed of lipid excipients which are cheap, easily available, and non-toxic; manufacturing technique is simple and readily scalable for large-scale production; the formulations provide controlled release of active components and have no stability issue. A large number of drugs have been incorporated into lipid nanoparticles with the objective of overcoming their poor oral bioavailability. This review tries to assess the potential of lipid nanoparticles for enhancing the oral bioavailability of drugs with permeability limited oral absorption such as drugs belonging to class IV of Biopharmaceutic Classification System (BCS) and protein and peptide drugs and also discusses the mechanism behind the bioavailability enhancement and safety issues related to such delivery systems.

Active Targeting of Drugs and Bioactive Molecules via Oral Administration by Ligand-Conjugated Lipidic Nanocarriers: Recent Advances

The oral route is the most widely accepted and commonly used route for administration. However, this route may not be suitable for certain drug candidates which suffer from the problem of low aqueous solubility and gastrointestinal absorption and extensive first-pass effect. Nanotechnology-based approaches can be taken up as remedies to overcome the disadvantages associated with the oral route. Among the various nanocarriers, lipidic nanocarriers are widely used for oral delivery of bioactive molecules owing to their several advantages. Active targeting of bioactive molecules via lipidic nanocarriers has also been widely attempted to improve oral bioavailability and to avoid first-pass effect. This active targeting approach involves the use of ligands grafted or conjugated onto a nanocarrier that is specific to the receptors. Active targeting increases the therapeutic efficacy as well as reduces the toxic side effects of the drug or bioactive molecules. This review mainly focuses on the challenges involved in the oral delivery of drugs and its approaches to overcome the challenges using nanotechnology, specifically focusing on lipidic nanocarriers like liposomes, solid lipid nanoparticles, and nanostructured lipid carriers and active targeting of drug molecules by making use of ligand-conjugated lipidic nanocarriers.

Nanocolloidal lipidic carriers of olmesartan medoxomil surface-tailored with Concavalin-A for lectin receptor targeting

Aim: The present work involves the development of Concavalin A-conjugated nanostructured lipidic carriers (NLCs) of olmesartan medoxomil for lectin receptor targeting. Materials & methods: Excipient selection was performed by drug solubility in solid and liquid lipids. Factor screening was carried out by evaluating the impact of formulation and process variables on the critical quality attributes. Surface modification of NLCs was carried out using Concavalin A and extensively characterized. Results & conclusion: NLCs exhibited the particle size of 273.6 nm, ζ-potential of -30.2 nm, encapsulation efficiency of 73.3% and sustained drug release profile. Nearly 4.2-fold improvement in cell uptake, four- to eightfold increase in Cmax and AUC, and 37% reduction in blood pressure was observed from NLCs over the pure drug.