Nanoemulsion gel-based topical delivery of an antifungal drug:in vitroactivity andin vivoevaluation

Nanosponge hydrogel of octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate of Alcaligenes faecalis

Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate (ODHP) was extracted in a previous study from the culture broth of soil isolate Alcaligenes faecalis MT332429 and showed a promising antimycotic activity. This study was aimed to formulate ODHP loaded β-cyclodextrins (CD) nanosponge (NS) hydrogel (HG) to control skin fungal ailments since nanosponges augment the retention of tested agents in the skin. Box-Behnken design was used to produce the optimized NS formulation, where entrapment efficiency percent (EE%), polydispersity index (PDI), and particle size (PS) were assigned as dependent parameters, while the independent process parameters were polyvinyl alcohol % (w/v %), polymer-linker ratio, homogenization time, and speed. The carbopol 940 hydrogel was then created by incorporating the nanosponges. The hydrogel fit Higuchi's kinetic release model the best, according to in vitro drug release. Stability and photodegradation studies revealed that the NS-HG remained stable under tested conditions. The formulation also showed higher in vitro antifungal activity against Candida albicans compared to the control fluconazole. In vivo study showed that ODHP-NS-HG increased survival rates, wound contraction, and healing of wound gap and inhibited the inflammation process compared to the other control groups. The histopathological examinations and Masson's trichrome staining showed improved healing and higher records of collagen deposition. Moreover, the permeability of ODHP-NS-HG was higher through rats' skin by 1.5-folds compared to the control isoconazole 1%. Therefore, based on these results, NS-HG formulation is a potential carrier for enhanced and improved topical delivery of ODHP. Our study is a pioneering research on the development of a formulation for ODHP produced naturally from soil bacteria. KEY POINTS: • Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propanoate was successfully formulated as a nanosponge hydrogel and statistically optimized. • The new formula exhibited in vitro good stability, drug release, and higher antifungal activity against C. albicans as compared to the fluconazole. • Ex vivo showed enhanced skin permeability, and in vivo analysis showed high antifungal activity as evidenced by measurement of various biochemical parameters and histopathological examination.

Augmentation of antifungal activity of fluconazole using a clove oil nanoemulgel formulation optimized by factorial randomized D-optimal design

In the present study, fluconazole (FLU) showed the highest solubility in clove oil and was selected as the oil phase for the FLU-loaded nanoemulsion (FLU-NE). Among the studied cosurfactants, Labrafac was better than ethanol at providing globules with acceptable sizes and a lower polydispersity index (PDI) when Tween 80 was the surfactant. This optimized FLU-NE was thermodynamically stable. Furthermore, FLU-NE stored at 40 ± 2 °C and 75 ± 5% relative humidity for 6 months demonstrated good stability. The FLU-NE was converted to a FLU-loaded nanoemulsion gel (FLU-NEG) using 2% w/v sodium carboxymethyl cellulose. The FLU-NEG was acceptable in terms of visual appearance and spreadability. Rheological studies revealed pseudoplastic behavior for FLU-NEG. The viscosity of FLU-NEG decreased when the applied rpm was increased. FLU-NEG showed greater drug release than that from a FLU-GEL formulation. Furthermore, the FLU release from FLU-NEG followed the Higuchi model. The results from the in vitro antifungal evaluation of FLU-NEG on Candida albicans ATCC 76615 strain confirmed the increase in the antifungal activity of FLU by clove oil. Significant differences were observed in the zones of inhibition produced by FLU-NEG compared to those produced by the blank nanoemulsion gel (B-NEG), fluconazole suspension (FLU-SUS), and nystatin samples. Thus, the increase in the antifungal activity of FLU using clove oil as the oil phase in its nanoemulsion formulation was quite evident from our results. Therefore, the developed FLU-NEG could be considered a potential candidate for further preclinical and clinical studies.

Enhancing collagen based nanoemulgel for effective topical delivery of Aceclofenac and Citronellol oil: Formulation, optimization, in-vitro evaluation, and in-vivo osteoarthritis study with a focus on HMGB-1/RAGE/NF-κB pathway, Klotho, and miR-499a

The majority of conventional osteoarthritis (OA) treatments are based on molecular adjustment of certain signaling pathways associated with osteoarthritis (OA) pathogenesis, however there is a significant need to search for more effective and safe treatments. This study centers around formulating Aceclofenac (ACF) with high bioavailability in combination with Citronellol oil and collagen. The optimal concentrations of Citronellol oil/D-Limonene oil, Tween 80, and Transcutol HP were determined using a pseudoternary phase diagram. The formulated nanoemulsions were studied for thermophysical stability. Thermodynamically stable formula were analyzed for droplet size, zeta potential, and in-vitro permeation. Then, collagen based nanoemulsion were prepared to capitalize on its efficacy in reducing osteoarthritis side effects and characterized for nano size properties. Formulae F10 and F10C were chosen as optimum nanosize formula. Hense, they were prepared and characterized as nanoemulgel dosage form. The nanoemulgel formulae F10NEG1 and F10CNEG1 showed reasonable viscosity and spreadability, with complete drug release after 4 h. These formulae were chosen for further In vivo anti-OA study. Collagen based ACF/citronellol emugel were able to modulate HMGB-1/RAGE/NF-κB pathway, mitigating the production of inflammatory cytokine TNF-α. They were also able to modulate Klotho and miR-499, reducing serum CTXII and COMP, by reducing the cartilage destruction. Histological investigations validated the efficacy, safety, and superiority of Aceclofenac in combination with Citronellol oil and collagen (F10CNEG1) over solo the treated group (F10NEG1 and blank). Hence, the findings of the current work encourage the use of this promising combined formula in treatment of OA patients.

Amphotericin B and micafungin duo-loaded nanoemulsion as a potential strategy against Candida auris biofilms

Candida auris is a multidrug-resistant yeast that has seen a worrying increase during the COVID-19 pandemic. Give7/n this, new therapeutic options, such as controlled-release nanomaterials, may be promising in combating the infection. Therefore, this study aimed to develop amphotericin B (AmB) and micafungin (MICA)-loaded nanoemulsions (NEMA) and evaluated against biofilms of C. auris. Nanoemulsions (NEs) were characterized and determined minimum inhibitory concentration MIC90, checkerboard and anti-biofilm. NEMA presented a size of 53.7 and 81.4 nm for DLS and NTA, respectively, with good stability and spherical morphology. MICAmB incorporated efficiency was 88.4 and 99.3%, respectively. The release results show that AmB and MICA obtained a release of 100 and 63.4%, respectively. MICAmB and NEMA showed MIC90 values of 0.015 and 0.031 ug/mL, respectively and synergism. NEMA showed greater metabolic inhibition and morphological changes in mature biofilms. This drugs combination and co-encapsulation proved to be a promising therapy against C. auris biofilms.

Microneedle-based arrays - Breakthrough strategy for the treatment of bacterial and fungal skin infections

Currently, fungal and bacterial skin infections rank among the most challenging public health problems due to the increasing prevalence of microorganisms and the development of resistance to available drugs. A major issue in treating these infections with conventional topical medications is the poor penetration through the stratum corneum, the outermost layer of the skin. The concept of microneedles seems to be a future-proof approach for delivering drugs directly into deeper tissues. By bypassing the skin barrier, microneedle systems allow therapeutic substances to reach deeper layers more efficiently, significantly improving treatment outcomes. Nonetheless, the primary challenges regarding the effectiveness of microneedles involve selecting the appropriate size and shape, along with polymer composition and fabrication technology, to enable controlled and efficient drug release. This review offers a comprehensive overview of the latest knowledge on microneedle types and manufacturing techniques, highlighting their potential effectiveness in treating bacterial and fungal skin infections. It includes updated statistics on infection prevalence and provides a detailed examination of common bacterial and fungal diseases, focusing on their symptoms, causative species, and treatment methods. Additionally, the review addresses safety considerations, regulatory aspects, and future perspectives for microneedle-based therapeutic systems. It also underscores the importance of industrialization and clinical translation efforts, emphasizing the significant potential of microneedle technology for advancing medical applications.

Enhancing bioactivity of Callistemon citrinus (Curtis) essential oil through novel nanoemulsion formulation

The main focus of this study was to create a stable and efficient nanoemulsion (NE) using Callistemon citrinus essential oil (EO). Various factors affecting the NE's stability were optimized including oil %, Tween 80%, time of sonication, and its accelerated stability was examined. The research also considered the antibacterial, antifungal, and larvicidal effects of the optimized NE (B10). The optimum NE stood out for its stability, featuring a particle size of 33.15 ± 0.32 nm. Analysis via IR spectroscopy confirmed successful EO encapsulation in B10. The formulation remained stable for six months, with B10 showing significantly higher antibacterial and antifungal potency compared to the pure oil. When samples were subjected to tests against Fusarium oxysporum, B10 exhibited a MIC value of 62.5 mg/mL, whereas the pure oil showed a MIC value of 250 mg/mL. This indicates that the B10 formulation was 50 times more effective than the EO. In terms of antibacterial activity against Escherichia coli, the MIC value was 0.256 mg/mL for B10 and 4 mg/mL for the EO. Also, pure oil and B10 displayed larvicidal effects against Chilo suppressalis (Walker) larvae, with B10 eliminating 95.2% of larvae in 48 h. Overall, stable and optimum C. citrinus NE with its strong antimicrobial qualities, shows promise as an effective fungicide and insecticide.

Tolterodine Tartrate Loaded Cationic Elastic Liposomes for Transdermal Delivery: In Vitro, Ex Vivo, and In Vivo Evaluations

OBJECTIVE

Tolterodine tartrate (TOTA) is a first-line therapy to treat overactive urinary bladder (OAB). Oral delivery causes high hepatic clearance, xerostomia, headache, constipation, and blurred vision. We addressed Hansen solubility parameter (HSP) and Design Expert oriented optimized cationic elastic liposomes for transdermal application.

METHODS

The experimental solubility was conducted in HSPiP predicted excipients to tailor formulations using surfactants, stearylamine, ethanol, and phosphatidylcholine (PC). These were evaluated for formulation characteristics. The optimized OTEL1 and OTEL1-G (gel) were compared against the drug solution (DS) and liposomes. In vitro and ex vivo studies were accomplished to investigate the insights into the mechanistic understanding of TOTA release and permeation ability. Finally, confocal laser scanning microscopy (CLSM) supported ex vivo results.

RESULTS

HSP values of TOTA were closely related to tween-80, stearylamine, and human's skin. The size (153 nm), %EE (87.6%), and PDI (0.25) values of OTEL1 were in good agreement to the predicted values (161 nm, 80.4%, and 0.31) with high desirability (0.963). Spherical and smooth OTEL1 (including OTEL1-G and liposomes) vesicles followed non-Fickian drug release as compared to DS (Fickian) as evidence with n > 0.5 (Korsmeyer and Peppas coefficient). OTEL1 (containing lipid and surfactant as 90 mg and 13.8 mg, respectively) exhibited 2.6 and 1.8-folds higher permeation flux than DS and liposomes, respectively. Biocompatible cationic OTEL1 was safe and non-hemolytic.

CONCLUSIONS

OTEL1 was promised as a lead vesicular approach and an alternative to conventional oral therapy to treat OAB in children and advanced age patients.

Preparation, characterization, and evaluation of ketoconazole-loaded pineapple cellulose green nanofiber gel

The present study involves the isolation of cellulose nanofibers from pineapple crown waste by a combined alkali-acid treatment method. The extracted pineapple nanofibers were characterized by Fourier-transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, nuclear magnetic resonance, high-resolution transmission electron microscopy, and dynamic light scattering. The extracted pineapple nanofibers were then incorporated in Carbopol 934P containing ketoconazole to prepare a ketoconazole-loaded pineapple nanofibrous gel. The prepared gel formulation was evaluated for viscosity, spreadability, extrudibility, pH, drug content, and texture profile analysis. The anticipated gel formulation was further evaluated by in vitro drug release (98.57 ± 0.58 %), ex vivo drug permeation, cytotoxicity, and histopathological studies. The permeation of the drug through skin determined by the ex-vivo diffusion study was found to be 38.27 % with a flux rate of 4.06 ± 0.26 μg/cm2/h. Further, the cytotoxicity study of pineapple nanofiber and ketoconazole-loaded nanofiber gel displayed no cytotoxic on healthy vero cells in the concentration range from 10 to 80 μg/ml. The histopathological analysis exhibited no signs of distress and inflammation. In conclusion, ketoconazole-loaded pineapple nanofiber gel could be considered as a promising delivery system for topical applications.

An Updated Review on Nanoemulsion: Factory for Food and Drug Delivery

BACKGROUND

A nanoemulsion is a colloidal system of small droplets dispersed in another liquid. It has attracted considerable attention due to its unique properties and various applications. Throughout this review, we provide an overview of nanoemulsions and how they can be applied to various applications such as drug delivery, food applications, and pesticide formulations.

OBJECTIVE

This updated review aims to comprehensively overview nanoemulsions and their applications as a versatile platform for drug delivery, food applications, and pesticide formulations.

METHODS

Research relevant scientific literature across various databases, including PubMed, Scopus, and Web of Science. Suitable keywords for this purpose include "nanoemulsion," "drug delivery," and "food applications." Ensure the search criteria include recent publications to ensure current knowledge is included.

RESULTS

Several benefits have been demonstrated in the delivery of drugs using nanoemulsions, including improved solubility, increased bioavailability, and controlled delivery. Nanoemulsions have improved some bioactive compounds in food applications, including vitamins and antioxidants. At the same time, pesticide formulations based on nanoemulsions have also improved solubility, shelf life, and effectiveness.

CONCLUSION

The versatility of nanoemulsions makes them ideal for drug delivery, food, and pesticide formulation applications. These products are highly soluble, bioavailable, and targeted, providing significant advantages. More research and development are required to implement nanoemulsion-based products on a commercial scale.

Xanthan and gum acacia modified olive oil based nanoemulsion as a controlled delivery vehicle for topical formulations

In this study, olive oil nanoemulsion modified with xanthan gum and gum acacia was explored as a potential controlled topical delivery vehicle. Oil-in-water nanoemulsion formulated with optimized composition of olive oil, tween 80, and water was used as the drug carrier and further modified with gum. Effect of gum on nanoemulsion different physiochemical characteristics, stability, rheology, drug release and encapsulation efficiency were investigated. Results showed that developed nanoemulsion behaved as low viscosity Newtonian fluid and released 100 % drug within 6 h. Modification with xanthan and gum acacia had significantly improved formulation viscosity, drug encapsulation efficiency (>85 %) and controlled drug release up to 40 % with release pattern following Korsmeyer-Peppas model. Additionally, xanthan gum modified formulation exhibited shear thinning rheology by forming an extended network in the continuous phase, whereas gum acacia modified formulation behaved as Newtonian fluid at high shear rate (>200 s-1). Furthermore, xanthan gum modified formulations had improved zeta potential, stability, monodispersity, and hemocompatibility and showed high antibacterial activity against S. aureus than gum acacia modified formulations. These results indicate the higher potential of xanthan gum modified formulation as a topical delivery vehicle. Moreover, skin irritation test demonstrated the safety of developed formulations for topical application.

Impact of miconazole nitrate ferrying cationic and anionic nanoemulsion and gels on permeation profiles of across EpiDerm, artificial membrane, and skin: Instrumental evidences

Based on our previous report, the study was extended to investigate the impact of miconazole nitrate (MCN) loaded cationic/anionic nanoemulsions and nanoemulsion gels on permeation behaviour across artificial-membrane, EpiDerm, and rat skin. Nanoemulsions and gels were evaluated for size, charge, viscosity, size-distribution, pH, and percent entrapment efficiency (%EE). In vitro drug diffusion across artificial membrane and EpiDerm were conducted to get diffusion coefficients. Permeation profiles were studied using rat skin to investigate mechanistic insight of formulated mediated permeation followed by CLSM (confocal laser scanning microscopy), SEM (scanning electron microscopy), AFM (atomic force microscopy), and irritation studies. Results showed that MCNE11-Rh (probed cationic nanoemulsion at pH ∼ 7.2) and MNE11-Rh (probed anionic nanoemulsion at pH ∼ 7.2) showed size values of 158 nm and 145 nm, respectively whereas MCNE11-GR (probed cationic nanoemulsion gel at pH ∼ 6.8) and MNE11-GR (probed anionic nanoemulsion gel at pH ∼ 6.8) exhibited size values 257 nm and 243 nm, respectively. The %EE values were found to be as 91.5 % and 89.6 % for MCNE11-Rh and MNE11-Rh, respectively. The gels (∼6000 cP) elicited relatively high viscosity than nanoemulsions (∼3300 - 3500 cP). MCNE11-GR showed the highest values of permeation flux, diffusion rate, diffusion coefficient (D), and permeation coefficient (P) across artificial membrane, EpiDerm, and rat skin which may be attributed to three potential factors (cationic charge, composition, and hydration by the hydrophilic gel) working in tandem. Transepidermal water loss (TEWL) by the MCNE11-GR was maximum (14.4 g/m2h) than control (6.1 g/m2h) indicating augmented interaction of MCNE11-Rh with skin components. Conclusively, cationic nanoemulsion gel was promising carrier for enhanced permeation and the drug access to the dermal region to treat deep seated fungal infections.

Synergistic approach for acne vulgaris treatment using glycerosomes loaded with lincomycin and lauric acid: Formulation, in silico, in vitro, LC-MS/MS skin deposition assay and in vivo evaluation

This study aims to develop a pharmaceutical formulation that combines the potent antibacterial effect of lincomycin and lauric acid against Cutibacterium acnes (C. acnes), a bacterium implicated in acne. The selection of lauric acid was based on an in silico study, which suggested that its interaction with specific protein targets of C. acnes may contribute to its synergistic antibacterial and anti-inflammatory effects. To achieve our aim, glycerosomes were fabricated with the incorporation of lauric acid as a main constituent of glycerosomes vesicular membrane along with cholesterol and phospholipon 90H, while lincomycin was entrapped within the aqueous cavities. Glycerol is expected to enhance the cutaneous absorption of the active moieties via hydrating the skin. Optimization of lincomycin-loaded glycerosomes (LM-GSs) was conducted using a mixed factorial experimental design. The optimized formulation; LM-GS4 composed of equal ratios of cholesterol:phospholipon90H:Lauric acid, demonstrated a size of 490 ± 17.5 nm, entrapment efficiency-values of 90 ± 1.4 % for lincomycin, and97 ± 0.2 % for lauric acid, and a surface charge of -30.2 ± 0.5mV. To facilitate its application on the skin, the optimized formulation was incorporated into a carbopol hydrogel. The formed hydrogel exhibited a pH value of 5.95 ± 0.03 characteristic of pH-balanced skincare and a shear-thinning non-Newtonian pseudoplastic flow. Skin deposition of lincomycin was assessed using an in-house developed and validated LC-MS/MS method employing gradient elution and electrospray ionization detection. Results revealed that LM-GS4 hydrogel exhibited a two-fold increase in skin deposition of lincomycin compared to lincomycin hydrogel, indicating improved skin penetration and sustained release. The synergistic healing effect of LM-GS4 was evidenced by a reduction in inflammation, bacterial load, and improved histopathological changes in an acne mouse model. In conclusion, the proposed formulation demonstrated promising potential as a topical treatment for acne. It effectively enhanced the cutaneous absorption of lincomycin, exhibited favorable physical properties, and synergistic antibacterial and healing effects. This study provides valuable insights for the development of an effective therapeutic approach for acne management.

Nanoemulsion: An Emerging Novel Technology for Improving the Bioavailability of Drugs

The pharmaceutical sector has made considerable strides recently, emphasizing improving drug delivery methods to increase the bioavailability of various drugs. When used as a medication delivery method, nanoemulsions have multiple benefits. Their small droplet size, which is generally between 20 and 200 nanometers, creates a significant interfacial area for drug dissolution, improving the solubility and bioavailability of drugs that are weakly water-soluble. Additionally, nanoemulsions are a flexible platform for drug administration across various therapeutic areas since they can encapsulate hydrophilic and hydrophobic medicines. Nanoemulsion can be formulated in multiple dosage forms, for example, gels, creams, foams, aerosols, and sprays by using low-cost standard operative processes and also be taken orally, topically, topically, intravenously, intrapulmonary, intranasally, and intraocularly. The article explores nanoemulsion formulation and production methods, emphasizing the role of surfactants and cosurfactants in creating stable formulations. In order to customize nanoemulsions to particular medication delivery requirements, the choice of components and production techniques is crucial in assuring the stability and efficacy of the finished product. Nanoemulsions are a cutting-edge technology with a lot of potential for improving medication bioavailability in a variety of therapeutic contexts. They are a useful tool in the creation of innovative pharmaceutical formulations due to their capacity to enhance drug solubility, stability, and delivery. Nanoemulsions are positioned to play a crucial role in boosting medication delivery and enhancing patient outcomes as this field of study continues to advance.

Itraconazole Loaded Biosurfactin Micelles with Enhanced Antifungal Activity: Fabrication, Evaluation and Molecular Simulation

Itraconazole (ITZ) is a broad-spectrum antifungal for superficial subcutaneous and systemic fungal infections. This study aimed to enhance the antifungal activity of ITZ using surfactin A (SA), a cyclic lipopeptide produced by the SA-producing Bacillus strain NH-100, possessing strong antifungal activity. SA was extracted, and ITZ-loaded SA micelles formulations were prepared via a single-pot rinsing method and characterized by particle size, zeta potential, and infrared spectroscopy. In vitro dissolution at pH 1.2, as well as hemolysis studies, was also carried out. The fabricated formulations were stable and non-spherical in shape, with an average size of about 179 nm, and FTIR spectra depicted no chemical interaction among formulation components. ITZ-loaded micelles showed decreased hemolysis activity in comparison to pure ITZ. The drug released followed the Korsmeyer-Peppas model, having R2 0.98 with the diffusion release mechanism. In an acidic buffer, drug release of all prepared formulations was in the range of 73-89% in 2 h. The molecular simulation showed the outstanding binding and stability profile of the ITZ-SA complex. The aromatic ring of the ITZ mediates a π-alkyl contact with a side chain in the SA. It can be concluded that ITZ-loaded micelles, owing to significant enhanced antifungal activity up to 6-fold due to the synergistic effect of SA, can be a promising drug delivery platform for delivery of poorly soluble ITZ.

Superficial Dermatophytosis across the World's Populations: Potential Benefits from Nanocarrier-Based Therapies and Rising Challenges

The most prevalent infection in the world is dermatophytosis, which is a major issue with high recurrence and can affect the entire body including the skin, hair, and nails. The major goal of this Review is to acquire knowledge about cutting-edge approaches for treating dermatophytosis efficiently by adding antifungals to formulations based on nanocarriers in order to overcome the shortcomings of standard treatment methods. Updates on nanosystems and research developments on animal and clinical investigations are also presented. Along with the currently licensed formulations, the investigation also emphasizes novel therapies and existing therapeutic alternatives that can be used to control dermatophytosis. The Review also summarizes recent developments on the prevalence, management approaches, and disadvantages of standard dosage types. There are a number of therapeutic strategies for the treatment of dermatophytosis that have good clinical cure rates but also drawbacks such as antifungal drug resistance and unfavorable side effects. To improve therapeutic activity and get around the drawbacks of the traditional therapy approaches for dermatophytosis, efforts have been described in recent years to combine several antifungal drugs into new carriers. These formulations have been successful in providing improved antifungal activity, longer drug retention, improved effectiveness, higher skin penetration, and sustained drug release.

Mechanistic of Vesicular Ethosomes and Elastic Liposomes on Permeation Profiles of Acyclovir across Artificial Membrane, Human Cultured EpiDerm, and Rat Skin: In Vitro-Ex Vivo Study

Acyclovir (ACV) controls cutaneous herpes, genital herpes, herpes keratitis, varicella zoster, and chickenpox. From previously reported ACV formulations, we continued to explore the permeation behavior of the optimized ACV loaded optimized ethosome (ETHO2R) and elastic liposome (ELP3R) and their respective carbopol gels across artificial membrane, cultured human EpiDerm, and rat skin. Transepidermal water loss (TEWL), scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), and atomic force microscopy (AFM) were used to investigate the mechanistic perspective of permeation behavior. The size values of reformulated ELP3-R and ETHO2-R were observed as 217 and 128 nm, respectively (close to previous report), whereas their respective gels showed as 231 and 252 nm, respectively. ETHO2R showed high elasticity, %EE, and low vesicle size. These were investigated for the diffusion rate of the drug permeation (3 h) across the artificial membrane, cultured human EpiDerm, and rat skin. ETHO2GR showed the highest permeation flux (78.42 µg/cm2/h), diffusion coefficient (8.24 × 10-5 cm2/h), and permeation coefficient (0.67 × 10-3 cm/h) of ACV across synthetic membrane, whereas diffusion coefficient (2.4 × 10-4 cm2/h) and permeation coefficient (0.8 × 10-3 cm/h) were maximum across EpiDerm for ETHO2GR. ETHO2R suspension showed maximized permeation flux (169.58 µg/cm2/h) and diffusion rate (0.293 mg/cm2/h1/2), suggesting the rapid internalization of vesicles with cultured skin cells at low viscosity. A similar observation was revealed using rat skin, wherein the permeation flux (182.42 µg/cm2/h), permeation coefficient (0.3 × 10-2 cm/h), and diffusion rate (0.315 mg/cm2/h1/2) of ETHO2R were relatively higher than ELP3R and ELP3GR. Relative small size (128 nm), low viscosity, ethanol-mediated ultra-deformability, high drug entrapment (98%), and elasticity (63.2) are associated with ETHO2R to provide remarkable permeation behavior across the three barriers. The value of TEWL for ETHO2R (21.9 g/m2h) was 3.71 times higher than untreated control (5.9 g/m2h), indicating ethanol-mediated maximized surficial skin lipid perturbation at 3 h of application, whereas the respective ETHO2GR-treated rat skin had TEWL value (18.6 g/m2h) slightly lower than ETHO2R due to gel-based hydration into the skin. SEL, CLSM, and AFM provided a mechanistic perspective of ETHO2R and ELP3R-mediated permeation across rat skin and carrier-mediated visualization (skin-vesicle interaction). AFM provided detailed nanoscale surface roughness topographical parameters of treated and untreated rat skin as supportive data to SEM and CLSM. Thus, ethosomes ETHO2R and respective gel assisted maximum permeation of ACV across rat skin and cultured human EpiDerm to control cutaneous herpes infection and herpes keratitis.

Natural Oils Enhance the Topical Delivery of Ketoconazole by Nanoemulgel for Fungal Infections

Nanoemulgel (NEG) pharmaceutical formulations are gaining popularity because of their ability to serve both as a nanoemulsion and as a gel. These products are well-known for their ease of use, spreadability, controlled release, and ability to hydrate dry skin. Natural essential oils have been shown to promote the cutaneous permeability of topical formulations, enhancing medication safety and efficacy. Herein, we developed NEG for the enhanced permeation of ketoconazole against candidiasis using clove oil (clove-oil-NEG) or eucalyptus oil (eucalyptus-oil-NEG), using the gelling agents carbopol 943 and hydroxypropyl methylcellulose (HPMC). We tested various excipients to increase the solubility of ketoconazole and formulate a nanoemulsion (NE). We measured the NE droplet particle size, shape, entrapment efficiency, and drug release. Furthermore, the physicochemical properties of the optimized nanoemulsion formulation were characterized by techniques such as Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) analysis. The NEs were loaded into gels to form NEGs. NEGs were characterized for drug content, homogeneity, rheology, spreadability, and antifungal activity against Candida albicans, both in vitro and in vivo. Optimized ketoconazole NEG preparations consisted of either 15% clove oil or 20% eucalyptus oil. Droplet sizes in the optimized NEs were <100 nm, and the polydispersity indexes were 0.24 and 0.26. The percentages of ketoconazole released after 24 h from the clove-oil-NEG and eucalyptus-oil-NEGs were 91 ± 4.5 and 89 ± 7%, respectively. Scanning electron microscopy (SEM) showed that the NEGs had a smooth, uniform, and consistent shape and internal structural organization. The drug contents in the clove-oil-NEG and eucalyptus-oil-NEG were 98.5 ± 2.2 and 98.8 ± 3.4%, respectively. Permeation values of ketoconazole from clove-oil-NEG and eucalyptus-oil-NEG were 117 ± 7 and 108.34 ± 6 μg cm-2, respectively. The ketoconazole NEG formulations also had higher levels of fungal growth inhibition than a marketed formulation. Finally, in vivo studies showed that the NEGs do not irritate the skin. Ketoconazole NEG with either 15% clove oil or 20% eucalyptus oil is stable with better efficacy than ketoconazole alone due to excellent dispersion, drug dissolution, and permeability and thus might be recommended for the effective and safe treatment of candidiasis.

GastroPlus- and HSPiP-Oriented Predictive Parameters as the Basis of Valproic Acid-Loaded Mucoadhesive Cationic Nanoemulsion Gel for Improved Nose-to-Brain Delivery to Control Convulsion in Humans

Oral and parenteral delivery routes of valproic acid (VA) are associated with serious adverse effects, high hepatic metabolism, high clearance, and low bioavailability in the brain. A GastroPlus program was used to predict in vivo performance of immediate (IR) and sustained release (SR) products in humans. HSPiP software 5.4.08 predicted excipients with maximum possible miscibility of the drug. Based on the GastroPlus and HSPiP program, various excipients were screened for experimental solubility, nanoemulsions, and respective gel studies intended for nasal-to-brain delivery. These were characterized by size, size distribution, polydispersity index, zeta potential, morphology, pH, % transmittance, drug content, and viscosity. In vitro drug release, ex vivo permeation profile (goat nasal mucosa), and penetration studies were conducted. Results showed that in vivo oral drug dissolution and absorption were predicted as 98.6 mg and 18.8 mg, respectively, from both tablets (IR and SR) at 8 h using GastroPlus. The predicted drug access to the portal vein was substantially higher in IR (115 mg) compared to SR (82.6 mg). The plasma drug concentration-time profile predicted was in good agreement with published reports. The program predicted duodenum and jejunum as the prime sites of the drug absorption and no effect of nanonization on Tmax for sustained release formulation. Hansen parameters suggested a suitable selection of excipients. The program recommended nasal-to-brain delivery of the drug using a cationic mucoadhesive nanoemulsion. The optimized CVE6 was associated with the optimal size (113 nm), low PDI (polydispersity index) (0.26), high zeta potential (+34.7 mV), high transmittance (97.8%), and high strength (0.7% w/w). In vitro release and ex vivo permeation of CVE6 were found to be substantially high as compared to anionic AVE6 and respective gels. A penetration study using confocal laser scanning microscopy (CLSM) executed high fluorescence intensity with CVE6 and CVE6-gel as compared to suspension and ANE6. This might be attributed to the electrostatic interaction existing between the mucosal membrane and nanoglobules. Thus, cationic nanoemulsions and respective mucoadhesive gels are promising strategies for the delivery of VA to the brain through intransal administration for the treatment of seizures and convulsions.

Recent Update on Nanoemulsion Impregnated Hydrogel: a Gleam into the Revolutionary Strategy for Diffusion-Controlled Delivery of Therapeutics

Since earlier times, dermatological remedies have been utilized to treat diseases associated with pain, irritation, and skin conditions. Compared to other routes of drug delivery, topical delivery of drugs offers several benefits. Scientists are investigating different alterations in dosage forms in addition to existing topical formulations such as ointments, gels, creams, lotions, and ointments to significantly improve the permeation of drugs and enhance the pharmacological efficacy of medications that are poorly absorbed via the skin. Conventional formulations have a plethora of problems viz. poor absorption, no target specificity, low spreadability, and inadequate bioavailability which leads the researchers toward developing novel formulations like nanoemulsions. The nanoemulsion can enhance the gradient in concentration and thermodynamic movement toward the epidermis and enhance the penetration of its constituents. However, due to its difficult application, nanoemulsion's lower viscosity limited its use in transdermal delivery. Thus, the development of nanoemulsion-based hydrogels has shown to be a successful strategy for removing obstacles from existing drug formulations. The simple application, expedient spreadability, non-stickiness, safety, and effectiveness of nanoemulsion-based hydrogel have led to substantial growth in their research in recent years. This review gives a brief idea about the prevalence of skin diseases, skin as an obstacle for drug delivery, and recent research insights to combat these obstacles. The work highlights the mechanism of drug release via nanoemulsion, hydrogels, and nanoemulsion-based hydrogels with reference to recent research on hydrophobic and hydrophilic drugs.

Nano-Emulsion Based Gel for Topical Delivery of an Anti-Inflammatory Drug: In vitro and in vivo Evaluation

Introduction

Arthritic disorder is a common disease in elderly patients and the most common cause of joint dysfunction. This study aims to design Piroxicam-loaded nanoemulsion (PXM-NE) formulations to enhance the analgesic and anti-inflammatory activity of the drug for topical use.

Methods

The nanoemulsion preparations were designed based on a high-pressure homogenization technique and were characterized for particle size (PS), poly dispersity index (Pi), zeta potential (ZP), drug content, and the selected formula was investigated for its topical analgesic activity and pharmacokinetic parameters.

Results

The characterizations showed that the PS was 310.20±19.84 nm, Pi was 0.15±0.02, and ZP was -15.74±1.6 mV for the selected formula. A morphology study showed that the PXM-NE droplets were spherical with a uniform size distribution. The in vitro release study showed a biphasic release pattern with a rapid release within the first 2 hours followed by a sustained release pattern. The analgesic activity for optimal formula was 1.66 times higher than the commercial gel with a double duration of analgesic activity. The C_max was 45.73±9.95 and 28.48±6.44 ng/mL for the gel form of the selected formula and the commercial gel respectively. The relevant bioavailability of the selected formula was 2.41 higher than the commercial gel.

Conclusion

The results showed good physicochemical properties, higher bioavailability, and a longer analgesic effect of PXM from nanoemulsion gel, as compared to the commercial product.

Nanoemulsion carriers for drug delivery: Assessment of environmental hazards

Nanoemulsions (NEs) have been extensively studied as carriers for drug delivery, since these provide a good alternative to the existing non-nano systems, while promoting their target delivery and controlled release. NEs are considered safe drug carriers from a pre-clinical perspective, but there is currently no information on their ecotoxicological effects. In the present study we investigated the toxicity of a NE material (lecithin, sunflower oil, borate buffer) designed to be used as a liposomal excipient for eye drops, further referred to as (Lipid Particle:LP) LP_Eye and its dispersant (borate buffer) (LP_Eye disp.). Effects were assessed using two model species in soil ecotoxicology in LUFA 2.2 soil: Enchytraeus crypticus (Oligochaeta) and Folsomia candida (Collembola), based on the OECD standard guideline (28 days) and its extension, a longer-term exposure (56 days). The endpoints evaluated included survival, reproduction, and size. LP_Eye and LP_Eye disp. were toxic to E. crypticus and F. candida, affecting all measured endpoints. The toxicity of LP_Eye in E. crypticus seemed to be induced by the dispersant, whereas for F. candida, more sensitive, this was less explanatory. There were no indications that toxicity increased with longer exposure. Current results provide ecotoxicological data for a group of NMs that was absent, revealing toxicity to relevant environmental species. Indications were that the dispersant contributed to most of the observed effects, thus there is room to improve the formulation and achieve lower environmental impact.

An Overview of Nanoemulgels for Bioavailability Enhancement in Inflammatory Conditions via Topical Delivery

The anti-inflammatory drugs that are generally available possess the disadvantage of hydrophobicity, which leads to poor permeability and erratic bioavailability. Nanoemulgels (NEGs) are novel drug delivery systems that aim to improve the solubility and permeability of drugs across the biological membrane. The nano-sized droplets in the nanoemulsion enhance the permeation of the formulation, along with surfactants and co-surfactants that act as permeation enhancers and can further improve permeability. The hydrogel component of NEG helps to increase the viscosity and spreadability of the formulation, making it ideal for topical application. Moreover, oils that have anti-inflammatory properties, such as eucalyptus oil, emu oil and clove oil, are used as oil phases in the preparation of the nanoemulsion, which shows a synergistic effect with active moiety and enhances its overall therapeutic profile. This leads to the creation of hydrophobic drugs that possess enhanced pharmacokinetic and pharmacodynamic properties, and simultaneously avoid systemic side effects in individuals with external inflammatory disorders. The nanoemulsion's effective spreadability, ease of application, non-invasive administration, and subsequent ability to achieve patient compliance make it more suitable for topical application in the combat of many inflammatory disorders, such as dermatitis, psoriasis, rheumatoid arthritis, osteoarthritis and so on. Although the large-scale practical application of NEG is limited due to problems regarding its scalability and thermodynamic instability, which arise from the use of high-energy approaches during the production of the nanoemulsion, these can be resolved by the advancement of an alternative nanoemulsification technique. Considering the potential advantages and long-term benefits of NEGs, the authors of this paper have compiled a review that elaborates the potential significance of utilizing nanoemulgels in a topical delivery system for anti-inflammatory drugs.

Skin drug delivery using lipid vesicles: A starting guideline for their development

Lipid vesicles can provide a cost-effective enhancement of skin drug absorption when vesicle production process is optimised. It is an important challenge to design the ideal vesicle, since their properties and features are related, as changes in one affect the others. Here, we review the main components, preparation and characterization methods commonly used, and the key properties that lead to highly efficient vesicles for transdermal drug delivery purposes. We stand by size, deformability degree and drug loading, as the most important vesicle features that determine the further transdermal drug absorption. The interest in this technology is increasing, as demonstrated by the exponential growth of publications on the topic. Although long-term preservation and scalability issues have limited the commercialization of lipid vesicle products, freeze-drying and modern escalation methods overcome these difficulties, thus predicting a higher use of these technologies in the market and clinical practice.

Nano-scaled emulsion and nanogel containing Mentha pulegium essential oil: cytotoxicity on human melanoma cells and effects on apoptosis regulator genes

BACKGROUND

Topical drug delivery using nanoemulsions and nanogels is a promising approach to treating skin disorders such as melanoma.

METHODS

In this study, the chemical composition of Mentha pulegium essential oil with five major compounds, including pulegone (68.11%), l-menthone (8.83%), limonene (2.90%), iso-pulegone (2.69%), and iso-menthone (1.48%) was first identified using GC-MS (Gas chromatography-Mass Spectrometry) analysis. Afterward, a nano-scaled emulsion containing the essential oil with a droplet size of 7.70 ± 1 nm was prepared. Nanogel containing the essential oil was then prepared by adding (2% w/v) carboxymethyl cellulose to the nano-scaled emulsion. Moreover, the successful loading of M. pulegium essential oil in the nano-scaled emulsion and nanogel was confirmed using ATR-FTIR (Attenuated total reflectance-Fourier Transform InfraRed) analysis. Then, human A375 melanoma cells were treated with different concentrations of samples, the MTT assay evaluated cell viability, and cell apoptosis was confirmed by flow cytometry. In addition, the expression of apoptotic and anti-apoptotic genes, including Bax and Bcl-2, was evaluated using the qPCR (quantitative Polymerase Chain Reaction) technique.

RESULTS

The results showed that cell viability was reduced by 90 and 45% after treatment with 300 μg/mL of the nanogel and nano-scaled emulsion. As confirmed by flow cytometry, this effect was mediated by apoptosis. Furthermore, gene expression analysis showed up-regulation of Bax and down-regulation of Bcl-2 genes. Therefore, the prepared nanogel, with high efficacy, could be considered a potent anticancer agent for supplementary medicine and in vivo research.

Microfluidics in drug delivery: review of methods and applications

Microfluidics technology has emerged as a promising methodology for the fabrication of a wide variety of advanced drug delivery systems. Owing to its ability for accurate handling and processing of small quantities of fluidics as well as immense control over physicochemical properties of fabricated micro and nanoparticles (NPs), microfluidic technology has significantly improved the pharmacokinetics and pharmacodynamics of drugs. This emerging technology has offered numerous advantages over the conventional drug delivery methods for fabricating of a variety of micro and nanocarriers for poorly soluble drugs. In addition, a microfluidic system can be designed for targeted drug delivery aiming to increase the local bioavailability of drugs. This review spots the light on the recent advances made in the area of microfluidics including various methods of fabrication of drug carriers, their characterization, and unique features. Furthermore, applications of microfluidic technology for the robust fabrication and development of drug delivery systems, the existing challenges associated with conventional fabrication methodologies as well as the proposed solutions offered by microfluidic technology have been discussed in details.HighlightsMicrofluidic technology has revolutionized fabrication of tunable micro and nanocarriers.Microfluidic platforms offer several advantages over the conventional fabrication methods.Microfluidic devices hold great promise in controlling the physicochemical features of fabricated drug carriers.Micro and nanocarriers with controllable release kinetics and site-targeting efficiency can be fabricated.Drug carriers fabricated by microfluidic technology exhibited improved pharmacokinetic and pharmacodynamic profiles.

Mechanistic Insights into Luteolin-Loaded Elastic Liposomes for Transdermal Delivery: HSPiP Predictive Parameters and Instrument-Based Evidence

We evaluated mechanistic insights into luteolin (LUT)-loaded elastic liposomes (OLEL1) permeated across rat skin. HSPiP software-based parameters, thermal analysis, infrared analysis, and morphological evaluations were employed to understand mechanistic observations of drug permeation and deposition. HSPiP provided HSP values (δ_d, δ_p, and δ_h) of OLEL1 (based on composition), LUT, excipients, and rat skin (literature value and by-default value). Rat skin was studied via Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), fluorescence microscopy, scanning electron microscopy (SEM), and atomic force microscopy (AFM) studies. The δ_d and δ_h estimation of the skin and phosphatidylcholine showed close relation in terms of δ_d and δ_h. Similarly, OLEL1 and the skin might interact with each other mainly through δ_d and δ_p forces as evidenced by the predicted values. The untreated skin showed characteristic stretching and vibrations as compared to lower frequencies caused by OLEL1. DSC showed changes in the thermal behavior of the skin after OLEL1 treatment as compared to the untreated skin. Visualization of these changes was evident under fluorescence microscopy and SEM for confirmed substantial reversible surface perturbation of the skin protein layer for improved vesicle permeation and subsequent internalization with the inner skin matrix. The AFM study confirmed the nanoscale surface roughness variation caused substantially by OLEL1 and OLEL1 placebo as compared to the untreated control and drug solution. Thus, the study clearly demonstrated mechanistic insights into LUT-loaded vesicles across rat skin for enhanced permeation and drug deposition.

Design and development of tranexamic acid loaded film-forming gel to alleviate melasma

BACKGROUND

Melasma is a skin condition that causes increased epidermal pigmentation, enlarged melanocytes, increased melanosomes, solar elastosis, dermal blood vessels, and, occasionally, perivascular lymph histiocytic infiltrates.

OBJECTIVE

To develop the film-forming gel to alleviate melasma. Tranexamic acid was used as a model drug to evaluate the suitability of formulation to prevent symmetric hyperpigmentation.

METHODS

FFG is a hydrophilic polymeric cross-linked system loaded with an active moiety. Nine different formulations of 2% TXA were formulated using polyvinyl alcohol and hydroxypropyl methylcellulose 50 cP as film-forming polymers. Sodium carboxymethylcellulose, methylcellulose, and carbopol were used as gelling agents.

RESULTS

F7, F8, and F9 showed shorter DT, that is, 11, 8, and 12 min, respectively. The folding endurance of F7, F8, and F9 was >100 folds, and the pH of F7, F8, and F9 was >6. Among three formulations, F8 was further analyzed for in vitro drug diffusion, which showed >95% drug diffusion within 48 h. In vivo, the skin irritation potential of F8 was estimated using BAL/C mice, which confirmed the absence of skin irritation.

CONCLUSION

From the obtained results, we conclude that the FFG can be a strategic attempt to deliver the cosmeceutical drugs like TXA to alleviate Melasma with improved sustainability of the drug.

Development and In Vitro/Ex Vivo Evaluation of Lecithin-Based Deformable Transfersomes and Transfersome-Based Gels for Combined Dermal Delivery of Meloxicam and Dexamethasone

Transfersomes (TFS) are the promising carriers for transdermal delivery of various low and high molecular weight drugs, owing to their self-regulating and self-optimizing nature. Herein, we report synthesis and characterization of TFS loaded with meloxicam (MLX), an NSAID, and dexamethasone (DEX), a steroid, for simultaneous transdermal delivery. The different formulations of TFS containing varying amounts of lecithin, Span 80, and Tween 80 (TFS-1 to TFS-6) were successfully prepared by thin-film hydration method. The size of ranged between 248 and 273 nm, zeta potential values covering from -62.6 to -69.5 mV, polydispersity index (PDI) values in between 0.329 and 0.526, and entrapment efficiency of MLX and DEX ranged between 63-96% and 48-81%, respectively. Release experiments at pH 7.4 demonstrated higher cumulative drug release attained with Tween 80 compared to Span 80-based TFS. The scanning electron microscopy (SEM) of selected formulations -1 and TFS-3 revealed spherical shape of vesicles. Furthermore, three optimized transfersomal formulations (based on entrapment efficiency, TFS-1, TFS-3, and TFS-5) were incorporated into carbopol-940 gels coded as TF-G1, TF-G3, and TF-G5. These transfersomal gels were subjected to pH, spreadability, viscosity, homogeneity, skin irritation, in vitro drug release, and ex vivo skin permeation studies, and the results were compared with plain (nontransfersomal) gel having MLX and DEX. TFS released 71.72% to 81.87% MLX in 12 h; whereas, DEX release was quantified as 74.72% to 83.72% in same time. Nevertheless, TF-based gels showed slower drug release; 51.54% to 59.60% for MLX and 48.98% to 61.23% for DEX. The TF-G systems showed 85.87% permeation of MLX (TF-G1), 68.15% (TF-G3), and 68.94% (TF-G5); whereas, 78.59%, 70.54%, and 75.97% of DEX was permeated by TF-G1, TF-G3, and TF-G5, respectively. Kinetic modeling of release and permeation data indicated to follow Korsmeyer-Peppas model showing diffusion diffusion-based drug moment. Conversely, plain gel influx was found mere 26.18% and 22.94% for MLX and DEX, respectively. These results suggest that TF-G loaded with MLX and DEX can be proposed as an alternate drug carriers for improved transdermal flux that will certainly increase therapeutic outcomes.

Nanoemulsion applications in photodynamic therapy

Nanoemulsion, or nanoscaled-size emulsions, is a thermodynamically stable system formed by blending two immiscible liquids, blended with an emulsifying agent to produce a single phase. Nanoemulsion science has advanced rapidly in recent years, and it has opened up new opportunities in a variety of fields, including pharmaceuticals, biotechnology, food, and cosmetics. Nanoemulsion has been recognized as a potential drug delivery technology for various drugs, such as photosensitizing agents (PS). In photodynamic therapy (PDT), PSs produce cytotoxic reactive oxygen species under specific light irradiation, which oxidize the surrounding tissues. Over the past decades, the idea of PS-loaded nanoemulsions has received researchers' attention due to their ability to overcome several limitations of common PSs, such as limited permeability, non-specific phototoxicity, hydrophobicity, low bioavailability, and self-aggregation tendency. This review aims to provide fundamental knowledge of nanoemulsion formulations and the principles of PDT. It also discusses nanoemulsion-based PDT strategies and examines nanoemulsion advantages for PDT, highlighting future possibilities for nanoemulsion use.

Development and efficacy of tryptophol-containing emulgel for reducing subcutaneous fungal nodules from Scedosporium apiospermum eumycetoma

Background and purpose

Subcutaneous infections caused by Scedosporium apiospermum present as chronic eumycetomatous manifestations in both immunocompromised and immunocompetent individuals. Serious adverse effects/toxicities from the long-term use of antifungal drugs and antifungal resistance have been reported in patients with S. apiospermum infections. The present study aimed to determine the anti-S. apiospermum activities of fungal quorum sensing molecule known as tryptophol (TOH) and to develop a TOH-containing emulgel for treating S. apiospermum eumycetoma.

Experimental approach

Anti-S. apiospermum activities of TOH were determined and compared with voriconazole. Effects of TOH on S. apiospermum biofilm formation and human foreskin fibroblast (HFF)-1 cell cytotoxicity were determined. Moreover, TOH-containing emulgel was developed and physical properties, in vitro, and in vivo antifungal activities against S. apiospermum eumycetoma were evaluated.

Findings/Results

The minimal concentration of TOH at 100 µM exhibited anti-S. apiospermum activities by reducing growth rate, germination rate, and biofilm formation with less cytotoxicity to HFF-1 cells than voriconazole. Further study on the development of an emulgel revealed that TOH-containing emulgel exhibited excellent physical properties including homogeneity, consistency, and stability. Treatment by TOH-containing emulgel significantly reduced subcutaneous mass in a mouse model of S. apiospermum eumycetoma. The histopathological assessment showed marked improvement after 14 days of TOH-containing emulgel treatment.

Conclusion and implications

TOH could be used as an anti-fungal agent against S. apiospermum infections. A novel and stable TOH-containing emulgel was developed with excellent anti-S. apiospermum activities suggesting the utilization of TOH-containing emulgel as an innovative therapeutic approach in the treatment of S. apiospermum eumycetoma.

Investigation of a Minocycline-Loaded Nanoemulgel for the Treatment of Acne Rosacea

In the present investigation, a nanoemulgel of minocycline was formulated and optimized for an improved drug delivery and longer retention time in the targeted area. Combining eucalyptus oil, Tween 20, and Transcutol HP, different o/w nanoemulsions were formulated by the oil phase titration method and optimized by pseudo-ternary phase diagrams. The morphology, droplet size, viscosity, and refractive index of the thermodynamically stable nanoemulsion were determined. Furthermore, optimized nanoemulsion was suspended in 1.0% w/v of Carbopol 940 gel to formulate the nanoemulgel, and for this, pH, viscosity, and spreadability were determined and texture analysis was performed. To compare the extent of drug penetration between nanoemulsion and nanoemulgel, ex vivo skin permeation studies were conducted with Franz diffusion cell using rat skin as the permeation membrane, and the nanoemulgel exhibited sustained-release behavior. It can be concluded that the suggested minocycline-containing naoemulgel is expected to treat acne rosacea more effectively.

Review on Nanomaterials and Nano-Scaled Systems for Topical and Systemic Delivery of Antifungal Drugs

Fungal infections are human infections that topically affect the skin, mucous membranes, or more serious, invasive, and systemic diseases of the internal organs. The design and advancement of the formulation and approach of administration for therapeutic agents depend on many variables. The correlation between the formulations, mode of administration, pharmacokinetics, toxicity and clinical indication must be thoroughly studied for the successful evolution of suitable drug delivery systems. There are several NP formulations that serve as good delivery approaches for antifungal drugs. This paper covers various groups of nanoparticles utilized in antifungal drug delivery, such as phospholipid-based vesicles (nanovesicles), non-phospholipid vesicles, polymeric nanoparticles, inorganic nanoparticles and dendrimers, whereby their advantages and drawbacks are emphasized. Many in vitro or cell culture studies with NP formulations achieve an adequate high drug-loading capacity; they do not reach the clinically significant concentrations anticipated for in vivo studies. Because of this, the transfer of these nano-formulations from the laboratory to the clinic could be aided by focusing studies on overcoming problems related to nanoparticle stability, drug loading, and high production and standardization costs.

Betamethasone Dipropionate Nanocrystals: Investigation, Feasibility and In Vitro Evaluation

Corticosteroids, such as betamethasone dipropionate (BMD), have been the mainstay in topical therapy as potent glucocorticoid receptor agonist with immune suppression, anti-proliferative, and anti-inflammatory effects. Moreover, they have poor skin penetration, which is a hurdle against its potential therapeutic benefits. In present investigation, nanocrystals as carrier for effective topical delivery of BMD were explored using wet milling as technique and polysorbate 80 as a non-ionic stabilizer. Upon optimizing different process parameters, promising results were observed at stabilizer concentration of 0.9% w/v having particle size analysis (PSA) and PDI as 284 nm and 0.299, respectively. These results were supported by the FTIR and PXRD spectra of BMD-API and BMD nanocrystals, suggesting strong crystal lattice structure of BMD being reduced due to milling. The reduction in particle morphology was evident from the FESEM images. The optimized batch of BMD nanocrystals was incorporated into Carbopol gel base, showing pH 6.2 ± 0.2 and viscosity 87.00 ± 5.2 Pa s at 25°C. A drug diffusion study using Franz diffusion cell proclaimed around ~86% BMD release from nanogel across the membrane. Also, it was observed that the BMD permeation across the skin was 2.39-fold higher with marketed formulation in contrast to BMD nanogel, suggesting prolonged drug release. The skin permeation flux with nanogel was at a much lower rate along with ~50.27% drug retention in different strata of skin, resulting in retention of drug nanocrystals. Thus, in nutshell the prolonged drug release from nanogel would fulfill the aim of once a day application and would aid in reducing the adverse events associated with repeated drug applications.

Luliconazole topical dermal drug delivery for superficial fungal infections: Penetration hurdles and role of functional nanomaterials

Luliconazole is the first and only anti-fungal agent approved for the short-term treatment of superficial fungal infections. However, commercially available conventional topical dermal drug delivery cargo of luliconazole is associated with certain limitations like lower skin permeation and shorter skin retention of drug. Therefore, present review is an attempt to decode the penetration hurdles in luliconazole topical dermal drug delivery. Moreover, we also summarized the activity of functional nanomaterials based drug delivery systems employed by the scientific fraternity to improve luliconazole efficacy in superficial fungal infections on case-to-case basis. In addition, efforts have also been made to unbox the critically acclaimed mechanism of action of luliconazole against fungal cells. Under the framework of future prospects, we have analyzed the combination of luliconazole with isoquercetin using in-silico docking technique for offering synergistic antifungal activity. Isoquercetin exhibited a good affinity for superoxide dismutase (SOD), a fungal target owing to the formation of hydrogen bond with Glu132, Glu133, and Arg143, in addition to few hydrophobic interactions. On the other hand, luliconazole inhibited lanosterol-14α-demethylase and consequently blocked ergosterol. In addition, nanotechnology and artificial neural network (ANN) derived integrated drug delivery systems may also be explored for augmenting the luliconazole therapeutic efficacy in topical fungal infections. Synergy of ANN models along with topical nanoscaled drug delivery may help to achieve critical quality attributes (CQA) to gain commercial success.

Development and characterization of niosomal gel of fusidic acid: in-vitro and ex-vivo approaches

Niosomes are multilamellar vesicles that efficiently deliver active substance into skin systemic circulation or skin layers. They are used in topical drug delivery system to enhance the skin permeation of active substance. So, the prime objective of this study was to develop a niosomal gel of fusidic acid to increase its skin permeation. Different formulations of niosomes of fusidic acid were designed by varying the cholesterol to surfactant ratio. Formulations containing fusidic acid, cholesterol, dihexadecyl pyridinium chloride, Span 60, or Tween 60 were prepared by thin film hydration method in rotary evaporator. The thin film formed in rotary flask was hydrated by phosphate buffer saline of pH 7.2. The niosomes formed were characterized through entrapment efficiency, size, polydispersity index (PDI), and zeta potential. The S3 formulation containing span 60 showed the highest entrapment efficiency (EE) of niosomes, so it was incorporated into Carbopol gel. Determination of pH, spreadability, rheological, and ex vivo permeation studies was conducted of niosomal gel. The results of ex vivo permeation studies showed high permeation of fusidic acid when gel was applied to an albino rat skin. According to the results and previous studies of niosomes, it can be concluded that niosomes enhanced the permeation of fusidic acid through the skin.

Anti-inflammatory and anti-nociceptive effects of Cinnamon and Clove essential oils nanogels: an in vivo study

BACKGROUND

Cinnamon (Cinnamomum zeylanicum) and Clove (Syzygium aromaticum) essential oils are two medicinally important plant-derived substances with a wide range of biological properties. Besides, nanoemulsion-based gels have been widely used to increase topical drug delivery and effectiveness.

METHODS

This study aimed to explore the anti-inflammatory effect (paw edema test) and the anti-nociceptive effect (hot plate and formalin test) of nanoemulsion-based gels containing the essential oils in the animal model. Cinnamon and Clove essential oils nanoemulsions with droplet sizes of 28 ± 6 nm and 12 ± 3 nm were first prepared. By adding carboxymethylcellulose (3.5% w/v), the nanoemulsions were then gelified. Finally, the nanogels were characterized by ATR-FTIR analysis and were used as topical pre-treatment before induction of inflammation or pain in acute and chronic analgesic experimental studies.

RESULTS

The paw edema and formalin findings showed that the nanogels formulations possess significant anti-nociceptive and anti-inflammatory effects.

CONCLUSION

The prepared nanogels could be considered as analgesic drugs for inhibiting the inflammation and pain of diseases.

Rhamnolipid Nano-Micelles versus Alcohol-Based Hand Sanitizer: A Comparative Study for Antibacterial Activity against Hospital-Acquired Infections and Toxicity Concerns

Hospital-acquired infections (HAIs) are considered to be a major global healthcare challenge, in large part because of the development of microbial resistance to currently approved antimicrobial drugs. HAIs are frequently preventable through infection prevention and control measures, with hand hygiene as a key activity. Improving hand hygiene was reported to reduce the transmission of healthcare-associated pathogens and HAIs. Alcohol-based hand sanitizers are commonly used due to their rapid action and broad spectrum of microbicidal activity, offering protection against bacteria and viruses. However, their frequent administration has been reported to be associated with many side effects, such as skin sensitivity, skin drying, and cracks, which promote further skin infections. Thus, there is an essential need to find alternative approaches to hand sanitation. Rhamnolipids are glycolipids produced by Pseudomonas aeruginosa, and were shown to have broad antimicrobial activity as biosurfactants. We have previously demonstrated the antimicrobial activity of rhamnolipid nano-micelles against selected drug-resistant Gram-negative (Salmonella Montevideo and Salmonella Typhimurium) and Gram-positive bacteria (Staphylococcus aureus, Streptococcus pneumoniae). To the best of our knowledge, the antimicrobial activity of rhamnolipid nano-micelles in comparison to alcohol-based hand sanitizers against microorganisms commonly causing HAIs in Egypt—such as Acinetobacter baumannii and Staphylococcus aureus—has not yet been studied. In the present work, a comparative study of the antibacterial activity of rhamnolipid nano-micelles versus alcohol-based hand sanitizers was performed, and their safety profiles were also assessed. It was demonstrated that rhamnolipid nano-micelles had a comparable antibacterial activity to alcohol-based hand sanitizer, with a better safety profile, i.e., rhamnolipid nano-micelles are unlikely to cause any harmful effects on the skin. Thus, rhamnolipid nano-micelles could be recommended to replace alcohol-based hand sanitizers; however, they must still be tested by healthcare workers in healthcare settings to ascertain their antimicrobial activity and safety.

Development of Apremilast Nanoemulsion-Loaded Chitosan Gels: In Vitro Evaluations and Anti-Inflammatory and Wound Healing Studies on a Rat Model

Apremilast (APL) has profound anti-inflammatory and wound healing activity, alongside other dermal care. This study aims to develop APL-loaded NEs (ANE1-ANE5) using eucalyptus oil (EO) as the oil and Tween-80 and transcutol-HP (THP) as a surfactant and co-surfactant, respectively. The prepared NEs were then evaluated based on mean droplet size (12.63 ± 1.2 nm), PDI (0.269 ± 0.012), ZP (−23.00 ± 5.86), RI (1.315 ± 0.02), and %T (99.89 ± 0.38) and ANE4 was optimized. Further, optimized NEs (ANE4) were incorporated into chitosan gel (2%, w/v). The developed ANE4-loaded chitosan gel was then evaluated for pH, spreadability, in vitro diffusion, and wound healing and anti-inflammatory studies. Moreover, in vivo studies denoted improved anti-inflammatory and wound healing activity and represented a decrease in wound size percentage (99.68 ± 0.345%) for the APNE2 gel test compared to a negative control (86.48 ± 0.87%) and standard control (92.82 ± 0.34%). Thus, the formulation of ANE4-loaded chitosan gels is an efficient topical treatment strategy for inflammatory and wound healing conditions.

Antifungal Cationic Nanoemulsion Ferrying Miconazole Nitrate with Synergism to Control Fungal Infections: In Vitro, Ex Vivo, and In Vivo Evaluations

This study aimed to deliver a cationic nanoemulsion carrying miconazole nitrate (MCN) to control fungal infections using excipients for synergism. Peceol (oil) and labrasol (surfactant) were selected based on maximum solubility and zone of inhibition values against Candida albicans and Aspergillus niger. Optimized MCNE11 was evaluated [size, zeta potential, % entrapment efficiency (%EE), % transmittance, viscosity, refractive index, extrudability, polydispersity (PDI), morphology, and pH]. An in vitro drug release study was conducted for comparison between DS (drug suspension) and MNE11. In vitro hemolysis was studied at two different concentrations (0.625 and 2.5 μg/mL). Permeation profiles were generated using rat skin. A Draize test was conducted using rabbit to negate irritability issues. Finally, a stability test of MCNE11 was conducted for 12 months. The results showed that MCNE11 (cationic) was the most optimized in term of size, %EE, and PDI. The drug release from MCNE11 was higher compared to DS but comparable to MNE11 (anionic), suggesting no impact of the imposed cationic charge on the release behavior. Moreover, permeation parameters of MCNE11 were significantly (p < 0.05) greater than MNE11, which may be attributed to the combined impact of size (low), surfactant (for reversible changes), and electrostatic interaction (nanoglobules-skin surface). Thus, stable MCN11 possessing high %EE (89.8%), low size (145 nm), maximum flux (5.7 ± 0.1 μg/cm²/h), high drug deposition (932.7 ± 41.6 μg/cm²), optimal viscosity (44.17 ± 0.8 cP), low PDI (0.21), optimal zeta potential (+28.1 mV), and low hemolysis can be promising alternatives to conventional cream to control resistant and recurring types of fungal infections.

Olive oil and clove oil-based nanoemulsion for topical delivery of terbinafine hydrochloride: in vitro and ex vivo evaluation

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96–98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.

Nanoemulsion delivery systems for enhanced efficacy of antimicrobials and essential oils

The ever-growing threat of new and existing infectious diseases in combination with antimicrobial resistance requires the need for innovative and effective forms of drug delivery. Optimal drug delivery systems for existing and newly developed antimicrobials can enhance drug bioavailability, enable site-specific drug targeting, and overcome current limitations of drug formulations such as short elimination half-lives, poor drug solubility, and undesirable side effects. Nanoemulsions (NE) consist of nanometer-sized droplets stabilized by emulsifiers and are typically more stable and permeable due to their smaller particle sizes and higher surface area compared to conventional emulsions. NE have been identified as a promising means of antimicrobial delivery due to their intrinsic antimicrobial properties, ability to increase drug solubility, stability, bioavailability, organ and cellular targeting potentials, capability of targeting biofilms, and potential to overcome antimicrobial resistance. Herein, we discuss non-drug loaded essential oil-based NE that can confer antimicrobial actions through predominantly physical or biochemical mechanisms without drug payloads. We also describe drug-loaded NE for enhanced antimicrobial efficacy by augmenting the potency of existing antimicrobials. We highlight the versatility of NE to be administered through multiple different routes (oral, parenteral, dermal, transdermal, pulmonary, nasal, ocular, and rectal). We summarize recent advances in the clinical translation of antimicrobial NE and shed light on future development of effective antimicrobial therapy to combat infectious diseases.

Mathematical modelling of nanoparticle-mediated topical drug delivery to skin tissue

Nanoparticles have been extensively studied to improve drug delivery outcomes, however, their use in topical delivery remains controversial. Although the feasibility to cross the human skin barrier has been demonstrated in experiments, the risk of low drug concentration in deep tissue still limits the application. In this study, mathematical modelling is employed to examine the performance of nanoparticle-mediated topical delivery for sending drugs into the deep skin tissue. The pharmacokinetic effect is evaluated based on the drug exposure over time. As compared to the delivery using plain drugs, nanoparticle-mediated topical delivery has the potential to significantly improve the drug exposure in deep skin tissue. Modelling predictions denote that the importance of sufficient long-term drug-skin contact in achieving effective drug deposition in the deep skin tissue. The delivery outcomes are highly sensitive to the release rate. Accelerating the release from nanoparticles in stratum corneum is able to improve the drug exposure in stratum corneum and viable epidermis while resulting in the reductions in dermis and blood. The release rate in stratum corneum and viable epidermis should be well-designed below a threshold for generating effective drug accumulation in dermis and blood. A more localised drug accumulation can be achieved in the capillary-rich region of dermis by increasing the local release rate. The release rate in dermis needs to be optimised to increase the drug exposure in the dermis region where there are fewer blood and lymphatics capillaries. Results from this study can be used to improve the regimen of topical delivery for localised treatment.

CaCO3-based carriers with prolonged release property for antifungal drug delivery to hair follicles

Superficial fungal infections are of serious concern worldwide due to their morbidity and increasing distribution across the globe in this era of growing antimicrobial resistance. Delivery of antifungals to target...

Pluronic F127-tailored lecithin organogel of acyclovir: preclinical evidence of antiviral activity using BALB/c murine model of cutaneous HSV-1 infection

Herpes is a well-known contagious infection equally affecting both sexes. Among many antiviral drugs employed for its treatment, acyclovir (ACY) is the drug of choice. The currently available therapies of ACY suffer from limitations like poor oral bioavailability (10-15%) and high-dose requirement. The present scientific study aims to explore pluronic lecithin organogel (PLO) as a novel drug delivery platform for ACY to bring an improvement in its delivery through topical route. The properties of organogel like biocompatibility and amphiphilic nature which facilitates dissolution of various drugs of different solubility characteristics along with enhancing the permeation potential of active molecules make it a favorable drug delivery platform for the management of topical diseases. The developed PLO formulations were characterized for micromeritic characteristics, viz., zeta potential, percentage drug content, organogel morphology, skin permeation, retention, and stability studies. The selected topical formulation was further compared with the marketed one for its therapeutic efficacy by inducing cutaneous Herpes simplex virus type 1 infection followed by confirmation of viral load by immunofluorescence and PCR analyses. The developed formulation showed significant improvement over the marketed product as reflected in lesion scoring index and PCR analysis. Further, it proved better to the marketed formulation in t.i.d. treatment regimen in comparison to control. The improvement in overall performance leading to enhanced bioavailability and safety is attributed to the synergism between excipient properties and formulation characteristics. The drug ACY in this micro environment not only finds an improved delivery vehicle but it also offers enhanced drug-target interactions.