Bioactive Phenolic Compounds From Agri-Food Wastes: An Update on Green and Sustainable Extraction Methodologies

Olive tree leaves as a great source of phenolic compounds: Comprehensive profiling of NaDES extracts

Waste from the olive industry is a noticeable source of antioxidant compounds that can be extracted and reused to produce raw materials related to the chemical, cosmetic, food and pharmaceutical sectors. This work studies the phenolic composition of olive leaf samples using liquid chromatography with ultraviolet detection coupled to mass spectrometry (LC-UV-MS). Olive leaf waste samples have been crushed, homogenized, and subjected to a solid-liquid extraction treatment with mechanical shaking at 80 °C for 2 h using Natural Deep Eutectic Solvents (NaDES). The phenolic compound identification in the resulting extracts has been carried out by high-resolution mass spectrometry (HRMS) using data-dependent acquisition mode using an Orbitrap HRMS instrument. >60 different phenolic compounds have been annotated tentatively, of which about 20 have been confirmed from the corresponding standards. Some of the most noticeable compounds are oleuropein and its aglycone and glucoside form, luteolin-7-O-glucoside, 3-hydroxytyrosol, and verbascoside.

Combining bioinformatics and multiomics strategies to investigate the key microbiota and active components of Liupao tea ameliorating hyperlipidemia

ETHNOPHARMACOLOGICAL RELEVANCE

Hyperlipidemia as a major health issue has attracted much public attention. As a geographical indication product of China, Liupao tea (LPT) is a typical representative of traditional Chinese dark tea that has shown good potential in regulating glucose and lipid metabolism. LPT has important medicinal value in hyperlipidemia prevention. However, the active ingredients and metabolic mechanisms by which LPT alleviates hyperlipidemia remain unclear.

AIM OF THE STUDY

This study aimed to systematically investigate the metabolic mechanisms and active ingredients of LPT extract in alleviating hyperlipidemia.

MATERIALS AND METHODS

Firstly, we developed a mouse model of hyperlipidemia to study the pharmacodynamics of LPT. Subsequently, network pharmacology and molecular docking were performed to predict the potential key active ingredients and core targets of LPT against hyperlipidemia. LC-MS/MS was used to validate the identity of key active ingredients in LPT with chemical standards. Finally, the effect and metabolic mechanisms of LPT extract in alleviating hyperlipidemia were investigated by integrating metabolomic, lipidomic, and gut microbiome analyses.

RESULTS

Results showed that LPT extract effectively improved hyperlipidemia by suppressing weight gain, remedying dysregulation of glucose and lipid metabolism, and reducing hepatic damage. Network pharmacology analysis and molecular docking suggested that four potential active ingredients and seven potential core targets were closely associated with roles for hyperlipidemia treatment. Ellagic acid, catechin, and naringenin were considered to be the key active ingredients of LPT alleviating hyperlipidemia. Additionally, LPT extract modulated the mRNA expression levels of Fxr, Cyp7a1, Cyp8b1, and Cyp27a1 associated with bile acid (BA) metabolism, mitigated the disturbances of BA and glycerophospholipid (GP) metabolism in hyperlipidemia mice. Combining fecal microbiota transplantation and correlation analysis, LPT extract effectively improved species diversity and abundance of gut microbiota, particularly the BA and GP metabolism-related gut microbiota, in the hyperlipidemia mice.

CONCLUSIONS

LPT extract ameliorated hyperlipidemia by modulating GP and BA metabolism by regulating Lactobacillus and Dubosiella, thereby alleviating hyperlipidemia. Three active ingredients of LPT served as the key factors in exerting an improvement on hyperlipidemia. These findings provide new insights into the active ingredients and metabolic mechanisms of LPT in improving hyperlipidemia, suggesting that LPT can be used to prevent and therapeutic hyperlipidemia.

Are phenolic compounds produced during the enzymatic production of prebiotic xylooligosaccharides (XOS) beneficial: a review

Phenolics produced during xylooligosaccharide production might inhibit xylanases and enhance the antioxidant and antimicrobial activities of XOS. The effects of phenolic compounds on xylanases may depend on the type and concentration of the compound, the plant biomass used, and the enzyme used. Understanding the effects of phenolic compounds on xylanases and their impact on XOS is critical for developing viable bioconversion of lignocellulosic biomass to XOS. Understanding the complex relationship between phenolic compounds and xylanases can lead to the development of strategies that improve the efficiency and cost-effectiveness of XOS manufacturing processes and optimise enzyme performance.

Effects of apples (Malus domestica) and their derivatives on metabolic conditions related to inflammation and oxidative stress and an overview of by-products use in food processing

Apple (Malus domestica) is the third most produced fruit worldwide. It is a well-known source of bioactive compounds mainly represented by hydroxycinnamic acids, flavan-3-ols, dihydrochalcones, dehydroascorbic acid, carotenoids, chlorogenic acid, epicatechin, and phloridzin. Due to the lack of a recent evaluation of the clinical trials associated with apple consumption, this review investigated the effects of this fruit on metabolic conditions related to inflammation and oxidative stress and reviewed the applications of apple waste on food products. Thirty-three studies showed that apples or its derivatives exhibit anti-inflammatory and antioxidant actions, improve blood pressure, body fat, insulin resistance, dyslipidemia, and reduce cardiovascular risks. Apples have a great economic impact due to its several applications in the food industry and as a food supplement since it has impressive nutritional value. Dietary fiber from the fruit pomace can be used as a substitute for fat in food products or as an improver of fiber content in meat products. It can also be used in bakery and confectionary products or be fermented to produce alcohol. Pomace phytocompounds can also be isolated and applied as antioxidants in food products. The potential for the use of apples and by-products in the food industry can reduce environmental damage.

From by-products to new application opportunities: the enhancement of the leaves deriving from the fruit plants for new potential healthy products

In the last decades, the world population and demand for any kind of product have grown exponentially. The rhythm of production to satisfy the request of the population has become unsustainable and the concept of the linear economy, introduced after the Industrial Revolution, has been replaced by a new economic approach, the circular economy. In this new economic model, the concept of "the end of life" is substituted by the concept of restoration, providing a new life to many industrial wastes. Leaves are a by-product of several agricultural cultivations. In recent years, the scientific interest regarding leaf biochemical composition grew, recording that plant leaves may be considered an alternative source of bioactive substances. Plant leaves' main bioactive compounds are similar to those in fruits, i.e., phenolic acids and esters, flavonols, anthocyanins, and procyanidins. Bioactive compounds can positively influence human health; in fact, it is no coincidence that the leaves were used by our ancestors as a natural remedy for various pathological conditions. Therefore, leaves can be exploited to manufacture many products in food (e.g., being incorporated in food formulations as natural antioxidants, or used to create edible coatings or films for food packaging), cosmetic and pharmaceutical industries (e.g., promising ingredients in anti-aging cosmetics such as oils, serums, dermatological creams, bath gels, and other products). This review focuses on the leaves' main bioactive compounds and their beneficial health effects, indicating their applications until today to enhance them as a harvesting by-product and highlight their possible reuse for new potential healthy products.

Bioactive Compounds from Agrifood Byproducts: Their Use in Medicine and Biology

Agrifood produces a high amount of waste, millions of tons per year worldwide, the disposal of which is a significant environmental, organizational, logistical, economic and ethic problem and in the last decades the scientific interest about this argument has increased significantly [...].

Phenolic and Antioxidant Characterization of Fruit By-Products for Their Nutraceuticals and Dietary Supplements Valorization under a Circular Bio-Economy Approach

Agri-food by-products, obtained as waste from the food industry, negatively impact the global economy and the environment. In order to valorize waste materials from fruit juices and tomato sauces as upcycled materials rich in health-promoting compounds, they were characterized in terms of polyphenolic and protein content. The results obtained were compared with those collected for their final products. The recovery of polyphenols was performed via ultrasound-assisted extraction (UAE). A high-performance liquid chromatography-diode array detector (HPLC-DAD) method was developed and validated to depict the quali-quantitative polyphenolic profile of both the by-products and the final products. The antioxidant capacity of the resulting extracts was characterized by UV-Vis spectrophotometric assays in terms of total phenolic content (TPC) and total antioxidant status (TAS). Moreover, the protein content was assessed with the Kjeldahl method too. The results highlighted a significant quantity of polyphenols remaining in peach, apricot, and apple by-products, which were able to exert an antioxidant activity (in the range of 4.95 ± 5.69 × 10-1 to 7.06 ± 7.96 × 10-1 mmol Trolox 100 g-1 of dry weight (DW) sample). Conversely, the tomato by-products were highly rich in proteins (11.0 ± 2.00 to 14.4 ± 2.60 g of proteins 100 g-1 DW). The results proved that all by-products may potentially be sustainable ingredients with nutritional and functional value in a circular bio-economy prospect.

Integrated Membrane Process in Organic Media: Combining Organic Solvent Ultrafiltration, Nanofiltration, and Reverse Osmosis to Purify and Concentrate the Phenolic Compounds from Wet Olive Pomace

Phenolic compounds from a hydroalcoholic extract of wet olive pomace were purified and concentrated by an integrated membrane process in organic media. First, UF010104 (Solsep BV) and UP005 (Microdyn Nadir) membranes were tested to be implemented in the ultrafiltration stage, with the aim of purifying the extract and obtaining a permeate enriched in phenolic compounds. Despite the high flux observed with the UF010104 membrane (20.4 ± 0.7 L·h-1·m-2, at 2 bar), the UP005 membrane was selected because of a more suitable selectivity. Even though some secoiridoids were rejected, the permeate stream obtained with this membrane contained high concentrations of valuable simple phenols and phenolic acids, whereas sugars and macromolecules were retained. Then, the ultrafiltration permeate was subjected to a nanofiltration step employing an NF270 membrane (DuPont) for a further purification and fractionation of the phenolic compounds. The permeate flux was 50.2 ± 0.2 L·h-1·m-2, working at 15 bar. Hydroxytyrosol and some phenolic acids (such as vanillic acid, caffeic acid, and ferulic acid) were recovered in the permeate, which was later concentrated by reverse osmosis employing an NF90 membrane. The permeate flux obtained with this membrane was 15.3 ± 0.3 L·h-1·m-2. The concentrated phenolic mixture that was obtained may have important applications as a powerful antioxidant and for the prevention of diabetes and neurodegenerative diseases.

Advancements in Litchi chinensis Peel Processing: A Scientific Review of Drying, Extraction, and Isolation of Its Bioactive Compounds

This article systematically reviews the advancements in processing litchi peel (Litchi chinensis), emphasizing drying, extraction, purification methods, and the potential of bioactive compounds obtained from litchi peel. This work also highlights the impact of various drying techniques on phytochemical profiles, focusing on how methods such as hot air and freeze-drying affect the preservation of bioactive compounds. The study delves into extraction methods, detailing how different solvents and techniques influence the efficiency of extracting bioactive compounds from litchi peel. Furthermore, the purification and characterization of active compounds, showcasing the role of chromatographic techniques in isolating specific bioactive molecules, is discussed. Biological properties and mechanisms of action, such as antioxidant, antihyperglycemic, cardioprotective, hepatoprotective, anti-atherosclerotic, and anticancer activities, are reviewed, providing insight into the potential health benefits of litchi peel compounds. This review highlights the importance of optimizing and selecting accurate drying and extraction methods to maximize the therapeutic effects of litchi peel and its bioactive compounds. This review also reveals the broad pharmacological potential of the isolated compounds, underscoring the need for further research to discover their specific actions and health benefits.

Valorisation of Agri-Food Waste for Bioactive Compounds: Recent Trends and Future Sustainable Challenges

Worldwide, a massive amount of agriculture and food waste is a major threat to the environment, the economy and public health. However, these wastes are important sources of phytochemicals (bioactive), such as polyphenols, carotenoids, carnitine, coenzymes, essential oils and tocopherols, which have antioxidant, antimicrobial and anticarcinogenic properties. Hence, it represents a promising opportunity for the food, agriculture, cosmetics, textiles, energy and pharmaceutical industries to develop cost effective strategies. The value of agri-food wastes has been extracted from various valuable bioactive compounds such as polyphenols, dietary fibre, proteins, lipids, vitamins, carotenoids, organic acids, essential oils and minerals, some of which are found in greater quantities in the discarded parts than in the parts accepted by the market used for different industrial sectors. The value of agri-food wastes and by-products could assure food security, maintain sustainability, efficiently reduce environmental pollution and provide an opportunity to earn additional income for industries. Furthermore, sustainable extraction methodologies like ultrasound-assisted extraction, pressurized liquid extraction, supercritical fluid extraction, microwave-assisted extraction, pulse electric field-assisted extraction, ultrasound microwave-assisted extraction and high hydrostatic pressure extraction are extensively used for the isolation, purification and recovery of various bioactive compounds from agri-food waste, according to a circular economy and sustainable approach. This review also includes some of the critical and sustainable challenges in the valorisation of agri-food wastes and explores innovative eco-friendly methods for extracting bioactive compounds from agri-food wastes, particularly for food applications. The highlights of this review are providing information on the valorisation techniques used for the extraction and recovery of different bioactive compounds from agricultural food wastes, innovative and promising approaches. Additionally, the potential use of these products presents an affordable alternative towards a circular economy and, consequently, sustainability. In this context, the encapsulation process considers the integral and sustainable use of agricultural food waste for bioactive compounds that enhance the properties and quality of functional food.

Sequential Extraction and Characterization of Essential Oil, Flavonoids, and Pectin from Industrial Orange Waste

Orange is one of the primary fruits processed into juice and other products worldwide, leading to a vast amount of waste accumulation. Such waste has been considered as an attractive candidate for upcycling to obtain bioactive components remaining. The present study investigated the extraction of essential oil (EO), flavonoids, and pectin from industrial orange waste with a holistic approach. To maximize EO yield and d-limonene concentration, hydrodistillation (HD) conditions were selected to be 5.5 mL water/g solid for 180 min. Remaining solids were further used for flavonoid extraction where conventional solvent, sequential ultrasound + solvent, and ultrasound-assisted extraction (UE) were applied. UE applied for 50 min with 120 mL solvent/g solid yielded the highest total phenolic (TPCs) and total flavonoid contents (TFCs), antioxidant capacity, and hesperidin and neohesperidin concentrations. In terms of TPC, TFC, antioxidant capacity, and antibacterial activity, both EO and flavonoid fractions demonstrated moderate to high bioactivity. At the final step, ethanol precipitation was applied to obtain the pectin that was solubilized in hot water during HD and it was characterized by Fourier transform infrared, degree of esterification, and galacturonic acid content. Practical application: to ensure utilization in the food, pharmaceutical, and cosmetic industries, this study presents a combined method to obtain several value-added compounds from industrial orange waste. Bioactive EO and flavonoids obtained could have applications in functional food, supplements, or cosmetic formulations, whereas extracted pectin can be used in many formulated foods and drugs.

Bioactives from citrus food waste: types, extraction technologies and application

The Citrus fruits belong to the category where the groups of fruits are recognized to be an admirable repository of bioactive elements and phytochemical constituents, with strong biological potentials. The prominent use of Citrus fruits for nutrition as well as food processing has led to the release of a large amount of waste into the environment and surrounding, and it simultaneously burdens the nature and existence of many organisms including the human population. In order to rectify such consequences, the reuse of food waste from citrus for various advantageous effects. In this regard, the first part of the article primarily focussed on the various strategies available for the extraction of chemical elements from citrus waste and the remaining strand of the article focussed on the various bioactive compounds with special reference to their pharmacological as well as the medicinal benefits and future prospects.

Graphical abstract

Phenolic Compound Composition of Sambucus nigra L. Wild-Growing Plants from Kosovo

Objectives

The aim of this study was to determine the phenolic components in the flowers and leaves of wild-growing Sambucus nigra L.

Materials and Methods

Plant materials were collected from eleven localities in Kosovo. Before LC-DAD-ESI-MSn analysis, an ultrasonic-assisted method with 70% methanol for 30 min extraction was used.

Results

In total, 34 and 37 phenolic compounds were identified in flower and leaf extracts, respectively, with a total content of 61321.82-85961.64 mg/kg dry weight (DW) and 36136.62-93890.37 mg/kg DW. In all of the analyzed extracts, 15 phenolic acids, 20 flavonoids, one lignan, and one coumaroyl iridoid were detected. The major components were flavonoids, especially flavonols (quercetin-3-rutinoside, caffeoyl-kaempferol, and isorhamnetin-3-rutinoside), followed by phenolic acids (dicaffeoylquinic acid isomer, caffeic acid derivative, dicaffeoylquinic acid isomer, and dicaffeoylquinic acid isomer).

Conclusion

In general, the methanolic extracts of flowers have shown higher polyphenolic content than those found in leaves. The multivariate statistical analysis of the phenolic content of the samples resulted in PLS-DA models with appropriate correlation coefficients of 0.903 and 0.921 for flower and leaf extracts, respectively. The models revealed distinctive clustering patterns, and the loading scatter plots depicted the unique phenolic compounds specific to each sample group.

A Comprehensive Review on Deep Eutectic Solvents and Its Use to Extract Bioactive Compounds of Pharmaceutical Interest

The extraction of bioactive compounds of pharmaceutical interest from natural sources has been significantly explored in recent decades. However, the extraction techniques used were not very efficient in terms of time and energy consumption; additionally, the solvents used for the extraction were harmful for the environment. To improve the environmental impact of the extractions and at the same time increase the extraction yields, several new extraction techniques were developed. Among the most used ones are ultrasound-assisted extraction and microwave-assisted extraction. These extraction techniques increased the yield and selectivity of the extraction in a smaller amount of time with a decrease in energy consumption. Nevertheless, a high volume of organic solvents was still used for the extraction, causing a subsequent environmental problem. Neoteric solvents appeared as green alternatives to organic solvents. Among the neoteric solvents, deep eutectic solvents were evidenced to be one of the best alternatives to organic solvents due to their intrinsic characteristics. These solvents are considered green solvents because they are made up of natural compounds such as sugars, amino acids, and carboxylic acids having low toxicity and high degradability. In addition, they are simple to prepare, with an atomic economy of 100%, with attractive physicochemical properties. Furthermore, the huge number of compounds that can be used to synthesize these solvents make them very useful in the extraction of bioactive compounds since they can be tailored to be selective towards a specific component or class of components. The main aim of this paper is to give a comprehensive review which describes the main properties, characteristics, and production methods of deep eutectic solvents as well as its application to extract from natural sources bioactive compounds with pharmaceutical interest. Additionally, an overview of the more recent and sustainable extraction techniques is also given.

Carboxymethyl cellulose/poly (vinyl alcohol) based active film incorporated with tamarind seed coat waste extract for food packaging application

Incorporating a bioactive food waste extract into biodegradable polymers is a promising green approach to producing active films with antioxidant and antibacterial activity for food packaging. Active packaging films from carboxymethyl cellulose (CMC) and polyvinyl alcohol (PVA) incorporated with tamarind seed coat waste extract (TS) were prepared by solvent casting method using citric acid as a crosslinking agent. The effect of TS content on the film properties was determined by measuring the optical, morphology, mechanical, water vapor transmission rate (WVTR), antioxidant, and antimicrobial attributes. The CMC/PVA-TS films were also tested on fresh pork. The addition of TS did not significantly affect the film structure and WVTR but it improved the mechanical and UV barrier properties. The films possessed antioxidant and antimicrobial ability against bacteria (S. aureus and E. coli). Thus, CMC/PVA packaging was successfully prepared, and the incorporation of TS enhanced the antioxidant and antimicrobial properties of the film, which extended the shelf-life of fresh pork.

Enhancement of the bioavailability of phenolic compounds from fruit and vegetable waste by liposomal nanocarriers

Fruits and vegetables are one of the most consumed and processed commodities globally and comprise abundant phenolic compounds, one of the main nutraceuticals in the food industry. Comparably elevated rates of these compounds are found in waste (peel, seeds, leaf, stem, etc.) in the food processing industry. They are being investigated for their potential use in functional foods. However, phenolic compounds' low bioavailability limits their application, which can be approached by loading the phenolic compounds into an encapsulation system such as liposomal carriers. This review aims to elucidate the recent trend in extracting phenolic compounds from the waste stream and the means to load them in stable liposomes. Furthermore, the application of these liposomes with only natural extracts in food matrices is also presented. Many studies have indicated that liposomes can be a proper candidate for encapsulating and delivering phenolic compounds and as a means to increase their bioavailability.

Lavandula pedunculata Polyphenol-Rich Extracts Obtained by Conventional, MAE and UAE Methods: Exploring the Bioactive Potential and Safety for Use a Medicine Plant as Food and Nutraceutical Ingredient

Nowadays, plant-based bioactive compounds (BCs) are a key focus of research, supporting sustainable food production and favored by consumers for their perceived safety and health advantages over synthetic options. Lavandula pedunculata (LP) is a Portuguese, native species relevant to the bioeconomy that can be useful as a source of natural BCs, mainly phenolic compounds. This study compared LP polyphenol-rich extracts from conventional maceration extraction (CE), microwave and ultrasound-assisted extraction (MAE and UAE). As a result, rosmarinic acid (58.68-48.27 mg/g DE) and salvianolic acid B (43.19-40.09 mg/g DE) were the most representative phenolic compounds in the LP extracts. The three methods exhibited high antioxidant activity, highlighting the ORAC (1306.0 to 1765.5 mg Trolox equivalents (TE)/g DE) results. In addition, the extracts obtained with MAE and CE showed outstanding growth inhibition for B. cereus, S. aureus, E. coli, S. enterica and P. aeruginosa (>50%, at 10 mg/mL). The MAE extract showed the lowest IC50 (0.98 mg DE/mL) for angiotensin-converting enzyme inhibition and the best results for α-glucosidase and tyrosinase inhibition (at 5 mg/mL, the inhibition was 87 and 73%, respectively). The LP polyphenol-rich extracts were also safe on caco-2 intestinal cells, and no mutagenicity was detected. The UAE had lower efficiency in obtaining LP polyphenol-rich extracts. MAE equaled CE's efficiency, saving time and energy. LP shows potential as a sustainable raw material, allowing diverse extraction methods to safely develop health-promoting food and nutraceutical ingredients.

Laccase-Catalyzed Synthesis of Added-Value Polymers from Cork and Grape Extracts

The development of products from natural plant sources, including agriculture and food wastes, contributes significantly to the circular economy and global sustainability. Cork and grape wastes were employed as the primary sources in this study to obtain compounds of interest under mild extraction conditions. Laccase was applied to oxidize the cork and grape extracts, with the aim of producing value-added molecules with improved properties. Ultraviolet-visible (UV-vis) spectroscopy was assessed to monitor the oxidation process, and characterization of the end products was performed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) spectroscopy. The antioxidant and antiaging properties were evaluated by means of ABTS, DPPH, FRAP, and SPF testing. Overall, as compared to their monomeric counterparts, the polymeric compounds displayed remarkable antioxidant and antiaging characteristics after laccase oxidation, showing tremendous potential for applications in the food, pharmaceutical, cosmetic, and textile industries.

Innovative production of value-added products using agro-industrial wastes via solid-state fermentation

The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.

Comparison of Biological Activities and Protective Effects on PAH-Induced Oxidative Damage of Different Coffee Cherry Pulp Extracts

Polycyclic aromatic hydrocarbons (PAHs) are the main toxic components of ambient air particulate matter (PM), causing oxidative damage to the skin and ultimately resulting in skin aging. This study was conducted to determine the anti-oxidant, anti-aging properties and protective effects of the extracts of coffee cherry pulp (Coffea arabica L.), which is a by-product of the coffee industry, against the oxidative damage induced by PAH exposure in human epidermal keratinocytes (HaCaT). Three different techniques were used to extract the coffee cherry pulp: maceration, Soxhlet and ultrasonication to obtain CCM, CCS and CCU extract, respectively, which were then compared to investigate the total phenolic content (TPC) and total flavonoid content (TFC). The chemical compositions were identified and quantified using high-performance liquid chromatography (HPLC). The results demonstrated that Soxhlet could extract the highest content of chlorogenic acid, caffeine and theophylline. CCS showed the significantly highest TPC (324.6 ± 1.2 mg GAE/g extract), TFC (296.8 ± 1.2 mg QE/g extract), anti-radical activity against DPPH free radicals (98.2 ± 0.8 µM Trolox/g extract) and lipid peroxidation inhibition (136.6 ± 6.2 µM Trolox/g extract). CCS also showed the strongest anti-aging effects based on collagenase, elastase, hyaluronidase and tyrosinase inhibitory enzymes. In addition, CCS can protect human keratinocyte cells from PAH toxicity by increasing the cellular anti-oxidant capacity. This study suggests that CCS has the potential to be used as a cosmetic material that helps alleviate skin damage caused by air pollution.

Green extraction of phenolics using deep eutectic solvents: a promising neoteric method

There has been a growing emphasis on developing extraction methods that are not only efficient but also environmentally friendly and sustainable. One promising avenue is the exploration of deep eutectic solvents (DESs) as neoteric extraction media. This study aims to investigate the potential of DESs as neoteric extraction media for phenolics-rich flower clove extracts. Two DESs were synthesised by mixing choline chloride with glycerol and lactic acid at a molar ratio of 1:2. The thermal profiles of the mixture were analysed using differential scanning calorimetry, and the viscosity and density were measured at different temperatures. The phenolic compounds were quantitatively characterised for all of the extractants using high-performance liquid chromatography. The total phenolic content and the antioxidant activities of the extracts were determined. The results showed that DESs significantly improved the extraction of antioxidant compounds from clove, especially for the case of phenolic compounds, and also considerably enhanced the antioxidant activity of the extracts. The use of DESs offers a green, efficient method for extracting value-added products from natural sources.

Polyphenols and Their Impact on Human Health

Given their potent antioxidant and biological properties [...].

Edible Insects: A New Sustainable Nutritional Resource Worth Promoting

Edible insects are a highly nutritious source of protein and are enjoyed by people all over the world. Insects contain various other nutrients and beneficial compounds, such as lipids, vitamins and minerals, chitin, phenolic compounds, and antimicrobial peptides, which contribute to good health. The practice of insect farming is far more resource-efficient compared to traditional agriculture and animal husbandry, requiring less land, energy, and water, and resulting in a significantly lower carbon footprint. In fact, insects are 12 to 25 times more efficient than animals in converting low-protein feed into protein. When it comes to protein production per unit area, insect farming only requires about one-eighth of the land needed for beef production. Moreover, insect farming generates minimal waste, as insects can consume food and biomass that would otherwise go to waste, contributing to a circular economy that promotes resource recycling and reuse. Insects can be fed with agricultural waste, such as unused plant stems and food scraps. Additionally, the excrement produced by insects can be used as fertilizer for crops, completing the circular chain. Despite the undeniable sustainability and nutritional benefits of consuming insects, widespread acceptance of incorporating insects into our daily diets still has a long way to go. This paper provides a comprehensive overview of the nutritional value of edible insects, the development of farming and processing technologies, and the problems faced in the marketing of edible insect products and insect foods to improve the reference for how people choose edible insects.

Pressurized Hot Water Extraction of Mangosteen Pericarp and Its Associated Molecular Signatures in Endothelial Cells

The mangosteen (Garcinia mangostana L.) pericarp is known to be rich in potent bioactive phytochemical compounds such as xanthones, which possess pharmacologically important antioxidant activity and beneficial cardiometabolic properties. Mangosteen pericarp is typically classified as unavoidable food waste and discarded, despite being rich in bioactive phytochemical compounds that therefore present an exciting opportunity for valorization. Thus, this study aims to extract phytochemical compounds from mangosteen pericarp using pressurized hot water extraction (PHWE) and determine its biological effects in endothelial cells using RNA sequencing. Liquid chromatography with MS/MS (LC/MSMS) and UV detection (LC/UV) was subsequently used to identify three key phytochemical compounds extracted from the mangosteen pericarp: α-Mangostin, γ-Mangostin, and Gartanin. Within the tested range of extraction temperatures by PHWE, our results demonstrated that an extraction temperature of 120 °C yielded the highest concentrations of α-Mangostin, γ-Mangostin, and Gartanin with a concomitant improvement in antioxidant capacity compared to other extraction temperatures. Using global transcriptomic profiling and bioinformatic analysis, the treatment of endothelial cells with mangosteen pericarp extracts (120 °C PHWE) for 48 h caused 408 genes to be differentially expressed. Furthermore, our results demonstrated that key biological processes related to "steroid biosynthesis and metabolism", likely involving the activation of the AMPK signaling pathway, were upregulated by mangosteen pericarp extract treatment. In conclusion, our study suggests a green extraction method to valorize phytochemical compounds from mangosteen pericarp as a natural product with potential beneficial effects on cardiometabolic health.

Autoinducers modulation as a potential anti-virulence target of bacteria by phenolic compounds

OBJECTIVE

The goal of this study was to determine the effects of phenolic extracts from grape (GrPE), pomegranate (PoPE), and persimmon (PePE) by-products on bacterial virulence activities such as biofilms, motility, energy-dependent efflux pumps, and β-lactamase activity, which are modulated primarily by quorum sensing (QS), defining their potential applications.

METHOD

The microdilution method was used to determine the minimum inhibitory concentration (MIC) and sub-inhibitory concentrations (SICs) of the extracts against reference pathogenic bacteria. The antibacterial mode of action was determined by labelling bacterial cells in in vivo cell-tracking experiments.

RESULTS

Antibiograms showed that PoPE inhibited bacteria at lower concentrations, and PePE had a stronger effect against Klebsiella pneumoniae. Both extracts caused significant cell membrane damage (CMD), whereas GrPE did not. At SICs, all extracts showed anti-QS activity, especially PePE, which inhibited violacein and pyocyanin production at 1/128 × MIC. Additionally, QS autoinducers found in Chromobacterium violaceum and Pseudomonas aeruginosa were modulated by the extracts; PePE showed the highest modulation. Antibiofilm assays revealed that GrPE, at MIC and 2 × MIC, acted as a potent antibiofilm agent against biofilms of Pseudomonas putida, Bacillus cereus, and Staphylococcus aureus, which was related to disruption of swarming motility by GrPE. All extracts, especially PoPE, exerted a potent effect against the activation of efflux pumps of P. aeruginosa as well as β-lactamase activity in K. pneumoniae.

CONCLUSION

Results suggest that the anti-virulence potential of the extracts may be related to their effect as extracellular autoinducer modulators. This study allowed to define potential applications of these extracts.

Microwave-assisted extraction in closed vessel in food analysis

Microwave-assisted extraction (MAE) is an important technique in analytical chemistry. It offers several advantages over traditional extraction methods, such as improved extraction efficiency, shorter extraction times, reduced solvent consumption, and enhanced analyte recovery. Using microwaves, heat is directly applied to the sample, leading to rapid and efficient extraction of target compounds by enhancing the solubility and diffusion of the target compounds, thus requiring lower solvent volume. Therefore, MAE can be considered a more environmentally friendly and cost-effective option facilitating the transition toward greener and more sustainable analytical chemistry workflows. This contribution systematically reviews the application of MAE to a selection of target compounds/compounds classes of relevance for food quality and safety assessment. As inclusion criteria, MAE active temperature control and molecularly-resolved characterization of the extracts were considered. Contents include a brief introduction of the principles of operation, available systems characteristics, and key parameters influencing extraction efficiency and selectivity. The application section covers functional food components (e.g., phenols, diterpenes, and carotenoids), lipids, contaminants (e.g., polycyclic aromatic hydrocarbons and mineral oil hydrocarbons), pesticides, veterinary drug residues, and a selection of process contaminants and xenobiotics of relevance for food safety.

Green Extraction of Polyphenols via Deep Eutectic Solvents and Assisted Technologies from Agri-Food By-Products

Polyphenols are the largest group of phytochemicals with important biological properties. Their presence in conveniently available low-cost sources, such as agri-food by-products, has gained considerable attention in their recovery and further exploitation. Retrieving polyphenols in a green and sustainable way is crucial. Recently, deep eutectic solvents (DESs) have been identified as a safe and environmentally benign medium capable of extracting polyphenols efficiently. This review encompasses the current knowledge and applications of DESs and assisted technologies to extract polyphenols from agri-food by-products. Particular attention has been paid to fundamental mechanisms and potential applications in the food, cosmetic, and pharmaceutical industries. In this way, DESs and DESs-assisted with advanced techniques offer promising opportunities to recover polyphenols from agri-food by-products efficiently, contributing to a circular and sustainable economy.

Valorization of fruit and vegetable processing by-products/wastes

Fruit and vegetable processing by-products and wastes are of great importance due to their high production volumes and their composition containing different functional compounds. Particularly, apple, grape, citrus, and tomato pomaces, potato peel, olive mill wastewater, olive pomace and olive leaves are the main by-products that are produced during processing. Besides conventional techniques, ultrasound-assisted extraction, microwave-assisted extraction, pressurized liquid extraction (sub-critical water extraction), supercritical fluid extraction, enzyme-assisted extraction, and fermentation are emerging tools for the recovery of target compounds. On the other hand, in the view of valorization, it is possible to use them in active packaging applications, as a source of bioactive compound (oil, phenolics, carotenoids), as functional ingredients and as biofertilizer and biogas sources. This chapter explains the production of fruit and vegetable processing by-products/wastes. Moreover, the valorization of functional compounds recovered from the fruit and vegetable by-products and wastes is evaluated in detail by emphasizing the type of the by-products/wastes, functional compounds obtained from these by-products/wastes, their extraction conditions and application areas.

Extraction and chemical characterisation of agro-waste from turmeric leaves as a source of bioactive essential oils with insecticidal and antioxidant activities

Turmeric (Curcuma longa L.) is a significant crop that has historically been used worldwide as a medicinal plant, spice, food colouring agent, and a significant ingredient in cosmetic industries. After harvesting rhizomes, leaves are considered waste material. This research study aims to extract and chemically characterise the essential oil from the leaves waste of turmeric with an evaluation of different insecticidal, antioxidant, and phytotoxic activities. Subsequently, the contact toxicity, fumigant toxicity, and repellent activity were evaluated against two key stored grain insect species. The gas chromatography-mass spectrometry (GC-MS) characterisation revealed that α-phellandrene (28.95%), 2-carene (16.51%), eucalyptol (10.54%) and terpinolene (10.24%) were the major chemical constituents. The study's findings on the insecticidal effects of essential oils extracted from turmeric leaves revealed noteworthy repellent, contact (at 24 h, LC50 = 6.51 mg/cm2 for Tribolium castaneum and LC50 = 4.74 mg/cm2 for Rhyzopertha dominica) and fumigant toxicities (at 24 h, LC50 = 2.57 mg/L air for T. castaneum and LC50 = 2.83 mg/L air for R. dominica), against two key stored grain insects. In addition, turmeric leaf essential oil showed notable antioxidant activity (IC50 = 10.04 ± 0.03 µg/mL for DPPH assay; IC50 = 14.12 ± 0.21 µg/mL for ABTS assay. Furthermore, a phytotoxicity study was carried out on stored paddy seeds and no toxic effects were found on germination rate and seedling growth. So, it might be expected that the essential oils extracted from the turmeric leaf waste could be valorised and demonstrate their potential as safe botanical insecticides against stored-product insects, with noble antioxidant properties.

From Waste to Green: Water-Based Extraction of Polyphenols from Onion Peel and Their Adsorption on Biochar from Grapevine Pruning Residues

Onion peels (OP) are rich in bioactive compounds with a plethora of benefits for human health, but this valuable material is often wasted and underutilized due to its inedibility. Likewise, grapevine pruning residues are commonly treated as agricultural waste, but biochar (BC) obtained from this material has favorable characteristics as an adsorbent. This study investigated the potential of BC in removal of targeted polyphenolic compounds from OP extracts. The OP extracts were obtained adhering to green chemistry principles using deionized water amplified by three methods: maceration (MAC), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE). The extraction efficiency on the polyphenolic profile and antioxidant capacity was investigated with different extraction temperatures and solid-to-liquid (s/l) ratios. For further analysis, UAE at 90 °C with an s/l ratio of 1:100 was used due to higher polyphenolic compound yield. The BC adsorption capacity of individual polyphenols was fitted with the Langmuir and Freundlich isotherm models. Quercetin-3,4'-diglucoside obtained the highest R2 coefficient in both models, and the highest qmax value. The optimum conditions in the dosage experiment suggested an amount of 0.5 g of BC using 3 g/L extracts. The studied BC showed a high affinity for targeted phytochemicals from OP extracts, indicating its potential to be applied for the green adsorption of valuable polyphenolic compounds.

Extraction methods and compositions of polyphenols in Shanxi aged vinegar

The extraction, purification, qualification, and quantification of polyphenols (PPs) in vinegar are challenging owing to the complex matrix of vinegar and the specific physicochemical and structural properties of PPs. This study aimed to develop a simple, efficient, low-cost method for enriching and purifying vinegar PPs. The enrichment and purification effects of five solid phase extraction (SPE) columns and five macroporous adsorption resins (MARs) for PPs were compared. The results show that SPE columns were more effective in purifying vinegar PPs than MARs. Among them, the Strata-XA column showed a higher recovery (78.469 ± 0.949%), yield (80.808 ± 2.146%), and purity (86.629 ± 0.978%) than other columns. In total, 48 PPs were identified and quantified using SPE and gas chromatography-mass spectrometry from the SPE column extracts; phenolic acids, such as 4-hydroxyphenyllactic acid, vanillic acid, 4-hydroxycinnamic acid, 4-hydroxybenzoic acid, protocatechuic acid, and 3-(4-Hydroxy-3-methoxyphenyl) propionic acid, occupy a major position in SAV. Furthermore, considering the potential applications of PPs, the concentrates were characterized based on their bioactive properties. They exhibited high total PP, flavonoid, and melanoidin contents and excellent anti-glycosylation and antioxidant activities. These results indicate that the established methodology is a high-efficiency, rapid-extraction, and environment-friendly method for separating and purifying PPs, with broad application prospects in the food, chemical, and cosmetic industries.

Recent advances in the combination of organic solvent-free extraction, chemical standardization, antioxidant assay, and cell culture metabolomics for functional food and its by-product

Functional foods and their by-products contain a wide range of bioactive components with an array of health benefits and were proposed to improve public health, well-being, and others. To achieve a circular economy, the processing and extraction of flavonoids, phenolic compounds, and others from functional food and agri-food wastes will require the use of environmentally friendly, sustainable, and a low-cost solution. Extraction methods that can eliminate the use of organic solvents, suitable for use in the laboratory and production of extracts will be covered. This will include subcritical water extraction (SBE), pressurized hot water extraction (PHWE), supercritical fluid extraction (SFE), and others. Based on the selected analytical methods, the determination of the marker or bioactive compounds and chemical fingerprints will provide the control measures to identify the batch-to-batch variation of the composition of the functional food products obtained. The combination of chemical standardization with antioxidant assay, such as DPPH and ABTS+ will provide further information on the quality of the extracts. Lastly, to ascertain the biological and physiological relevance of the antioxidant properties of the target sample, treatment of the antioxidant compounds or extracts was carried out using cellular models, and validated using other experimental endpoints, such as metabolomics.

Impact of High-Pressure Homogenization on Enhancing the Extractability of Phytochemicals from Agri-Food Residues

The primary objective of the Sustainable Development Goals is to reduce food waste by employing various strategies, including the reuse of agri-food residues that are abundantly available and the complete use of their valuable compounds. This study explores the application of high-pressure homogenization (HPH), an innovative nonthermal and green treatment, for the recovery of bioactive compounds from agri-food residues. The results demonstrate that the optimized HPH treatment offers advantages over conventional solid/liquid extraction (SLE), including shorter extraction time, solvent-free operation, low temperatures, and higher yields of phenol extraction (an approximately 20% improvement). Moreover, the micronization of agri-food residue-in-water suspensions results in a decrease in the size distribution to below the visual detection limit, achieved by disrupting the individual plant cells, thus enhancing suspension stability against sedimentation. These findings highlight the potential of HPH for environmentally friendly and efficient extraction processes.

Urine Metabolites and Bioactive Compounds from Functional Food: Applications of Liquid Chromatography Mass Spectrometry

Bioactive compounds in functional foods, medicinal plants and others are considered attractive value-added molecules based on their wide range of bioactivity. It is clear that an important role is occupied by polyphenol, phenolic compounds and others. Urine is an effective biofluid to evaluate and monitor alterations in homeostasis and other processes related to metabolism. The current review provides a detailed description of the formation of urine in human body, various aspects relevant to sampling and analysis of urinary metabolites before presenting recent developments leveraging on metabolite profiling of urine. For the profiling of small molecules in urine, advancement of liquid chromatography mass tandem spectrometry (LC/MS/MS), establishment of standardized chemical fragmentation libraries, computational resources, data-analysis approaches with pattern recognition tools have made it an attractive option. The profiling of urinary metabolites gives an overview of the biomarkers associated with the diet and evaluates its biological effects. Metabolic pathways such as glycolysis, tricarboxylic acid cycle, amino acid metabolism, energy metabolism, purine metabolism and others can be evaluated. Finally, a combination of metabolite profiling with chemical standardization and bioassay in functional food and medicinal plants will likely lead to the identification of new biomarkers and novel biochemical insights.

Quorum sensing interference by phenolic compounds - A matter of bacterial misunderstanding

Over the past decade, numerous publications have emerged in the literature focusing on the inhibition of quorum sensing (QS) by plant extracts and phenolic compounds. However, there is still a scarcity of studies that delve into the specific mechanisms by which these compounds inhibit QS. Thus, our question is whether phenolic compounds can inhibit QS in a specific or indirect manner and to elucidate the underlying mechanisms involved. This study is focused on the most studied QS system, namely, autoinducer type 1 (AI-1), represented by N-acyl-homoserine lactone (AHL) signals and the AHL-mediated QS responses. Here, we analyzed the recent literature in order to understand how phenolic compounds act at the cellular level, at sub-inhibitory concentrations, and evaluated by which QS inhibition mechanisms they may act. The biotechnological application of QS inhibitors holds promising prospects for the pharmaceutical and food industries, serving as adjunct therapies and in the prevention of biofilms on various surfaces.

Enhancing Nutrient Recovery and Bioactive Compound Extraction from Spirulina through Supercritical Fluid Extraction: Implications for SH-SY5Y Cell Viability

This work explores the efficiency of supercritical fluid extraction (SFE) to recover minerals, pigments, and antioxidant compounds from the spirulina microalgae. Moreover, the fatty acids and phenolic profiles of the extracts obtained were also investigated, and the effect of the extracts on SH-SY5Y cell viability was tested. The extraction of phycocyanin was improved by SFE compared to conventional extraction, from 2.838 ± 0.081 mg/g dry matter (DM) (control) to 6.438 ± 0.411 mg/g DM (SFE). SFE treatment also improved chlorophyll a and carotenoid recoveries increasing from 5.612 ± 0.547 to 8.645 ± 0.857 mg/g DM and from 0.447 ± 0.096 to 0.651 ± 0.120 mg/g DM, respectively. Regarding minerals, the SFE improved Mg recovery with 77% more than the control extraction. Moreover, palmitoleic, stearic, γ-linolenic, eicosadienoic and eicosatrienoic acids recovery was improved by SFE. Phenolic profiles were identified via triple-TOF-LC-MS-MS. Considering heavy metals, a higher rate of Pb extraction was observed for the SFE extract, while no significant differences were observed for Hg between both extractions. Finally, SFE extract improved cell viability compared to the control extract. Thus, SFE constitutes an interesting tool to sustainably extract high-added-value compounds; however, potential contaminants such as Pb need to be controlled in the resulting extracts.

Recent advances in bio-based extraction processes for the recovery of bound phenolics from agro-industrial by-products and their biological activity

Usually found bound to other complex molecules (e.g., lignin, hemicellulose), phenolic compounds (PC) are widely present in agro-industrial by-products, and their extraction is challenging. In recent times, research is starting to highlight the bioactive roles played by bound phenolics (BPC) in human health. This review aims at providing a critical update on recent advances in green techniques for the recovery of BPC, focusing on enzymatic-assisted (EAE) and fermentation-assisted extraction (FAE) as well as in the combination of technologies, showing variable yield and features. The present review also summarizes the most recent biological activities attributed to BPC extracts until now. The higher antioxidant activity of BPC-compared to FPC-coupled with their affordable by-product source make them medicinally potent and economically viable, promoting their integral upcycling and generating new revenue streams, business, and employment opportunities. In addition, EAE and FAE can have a biotransformative effect on the PC itself or its moiety, leading to improved extraction outcomes. Moreover, recent research on BPC extracts has reported promising anti-cancer and anti-diabetic activity. Yet further research is needed to elucidate their biological mechanisms and exploit the true potential of their applications in terms of new food products or ingredient development for human consumption.

Antioxidant Silicone Elastomers without Covalent Cross-Links

Improved sustainability is associated with elastomers that readily breakdown in the environment at end of life and, as importantly, that can be reprocessed/reused long before end of life arises. We report the preparation of silicone elastomers that possess both thermoplasticity-reprocessability-and antioxidant activity. A combination of ionic and H-bonding links natural phenolic antioxidants, including catechol, pyrogallol, tannic acid, and others, to telechelic aminoalkylsilicones. The mechanical properties of the elastomers, including their processability, are intimately linked to the ratio of [ArOH]/[H2NR] that was found to be optimal when the ratio exceeded 1:1.

Integral Valorization of Grape Pomace for Antioxidant Pickering Emulsions

Full harnessing of grape pomace (GP) agricultural waste for the preparation of antioxidant Pickering emulsions is presented herein. Bacterial cellulose (BC) and polyphenolic extract (GPPE) were both prepared from GP. Rod-like BC nanocrystals up to 1.5 µm in length and 5-30 nm in width were obtained through enzymatic hydrolysis (EH). The GPPE obtained through ultrasound-assisted hydroalcoholic solvent extraction presented excellent antioxidant properties assessed using DPPH, ABTS and TPC assays. The BCNC-GPPE complex formation improved the colloidal stability of BCNC aqueous dispersions by decreasing the Z potential value up to -35 mV and prolonged the antioxidant half-life of GPPE up to 2.5 times. The antioxidant activity of the complex was demonstrated by the decrease in conjugate diene (CD) formation in olive oil-in-water emulsions, whereas the measured emulsification ratio (ER) and droplet mean size of hexadecane-in-water emulsions confirmed the physical stability improvement in all cases. The synergistic effect between nanocellulose and GPPE resulted in promising novel emulsions with prolonged physical and oxidative stability.

Multi-Criteria Optimization including Environmental Impacts of a Microwave-Assisted Extraction of Polyphenols and Comparison with an Ultrasound-Assisted Extraction Process

Valorization of wastes and by-products using environmentally friendly technologies with an optimal cost-benefit relationship is a current major issue in agri-food industries. An original tool was recently developed for multi-criteria optimization of an ultrasound-assisted extraction (UAE) process including the assessment of environmental impacts using Life Cycle Assessment. In the present work, this methodology was adapted and applied to another green extraction process, microwave-assisted extraction (MAE), with the same case study, valorization of antioxidant polyphenols from downgraded beet seeds. Once built, the obtained multi-criteria optimization tool was used to investigate performances of the MAE process regarding productivity criteria (polyphenol concentration and antioxidant activity of the extracts), energy consumption and environmental impacts as functions of operating parameters (time, solvent composition, microwave power density, and liquid-solid ratio). The MAE process was optimized under different constraints and compared to the UAE process. For the studied conditions and different investigated scenarios, MAE enabled obtaining extracts with higher polyphenol concentrations and antioxidant activity (approximately 33% and 23% enhancements, respectively), and to strongly reduce extraction duration (by a factor up to 6), whereas UAE enabled reducing the energy consumption (up to 3.6 fold) and the environmental impacts (up to 12% for climate change).

Agro-Food Waste as an Ingredient in Functional Beverage Processing: Sources, Functionality, Market and Regulation

Waste generated from the agro-food industry represents a concerning environmental, social and economic issue. The Food and Agriculture Organization of the United Nations defines food waste as all food that decreases in quantity or quality to the extent that it is thrown out by food service providers and consumers. The FAO reports that 17% of worldwide food production may be wasted. Food waste may include fresh products, food close to the expiration date discarded by retailers and food products from household kitchens and eating establishments. However, food waste offers different possibilities to extract functional ingredients from different sources, such as dairy, cereals, fruits, vegetables, fibers, oils, dye and bioactive compounds. The optimization of agro-food waste as an ingredient will help in the development and innovation of food products to generate functional food and beverages to prevent and treat several diseases in consumers.

Hydroxypropyl-β-Cyclodextrin-Glycerol-Assisted Extraction of Phenolics from Satureja montana L.: Optimization, Anti-Elastase and Anti-Hyaluronidase Properties of the Extracts

A green method for hydroxypropyl-β-cyclodextrin-glycerol-assisted extraction (HCGAE) of bioactive phenolics from S. montana, Lamiaceae was optimized using Box-Behnken design and response surface methodology and compared conventional water/ethanol-based extraction. The procedure was aimed at obtaining extracts with the maximum content of total phenols (TP), flavonoids (TF), dihydroxycinnamic acids (TDCA), rosmarinic acid (RA), and luteolin 7-O-glucoside (LG). The impact of glycerol content (0–70%), 2-hydroxypropyl-β-cyclodextrin content (0–0.4 mmol), temperature (20–70 °C), herbal material weight (0.3–0.8 g), extraction duration (5–25 min), and ultrasound power (144–720 W) on the extraction efficiency was analyzed. Four extracts with maximum amounts of target phenols, OPT-TP (5.93 mg/mL), OPT-TDCA-RA (4.17 mg/mL and 1.16 mg/mL, respectively), OPT-TF (0.99 mg/mL), and OPT-LG (0.28 mg/mL) were prepared. Comparison of the content of TDCA, TF, RA, and LG with those obtained in water/ethanol-based extraction demonstrated the superiority of the HCGAE approach for the extraction of phenols from S. montana. The extracts displayed good anti-elastase and excellent anti-hyaluronidase activity. IC50 values of the anti-hyaluronidase activity (1.67 ± 0.06 μL extract/mL, 1.16 ± 0.08 μL extract/mL, 0.85 ± 0.03 μL extract/mL, and 0.79 ± 0.05 μL extract/mL for OPT-TP, OPT-TDCA-RA, OPT-TF, and OPT-LG, respectively) surpassed that of the applied positive control, tannic acid. The observed bioactivity of the optimized extracts makes them promising active ingredients for natural cosmetics. The results of this research indicate that HCGAE is an excellent alternative to conventional water/ethanol-based extraction of phenolics from Satureja montana L.-yielding extracts with potent anti-elastase and anti-hyaluronidase properties suitable for direct use in cosmetic products.

Phytochemical Analysis and Genotoxicological Evaluation of Prickly Pear Peel Extracts

This study investigated the beneficial properties of prickly pear peel (PPP) extracts from Opuntia ficus-indica (L.) Mill. Extracts were obtained via the Soxhlet extraction method using methanol (P1), ethanol (P2) and ethanol-water (P3) as extraction solvents. Their total phenolic and flavonoid content (TPC and TFC, respectively) and their antioxidant activity (AA) were determined. The PPP extracts were characterized in detail using mass spectrometry techniques. Their cyto-genotoxic effect and antigenotoxic potential against mitomycin C were evaluated via the cytokinesis block micronucleus (CBMN) assay on human lymphocytes. Enhanced TPC, TFC and AA values were recorded for all the extracts. Moreover, P1 and P2 were cytotoxic only at the highest concentrations, whereas P3 was found to be cytotoxic in all cases. No significant micronucleus induction was observed in the tested extracts. The PPP extracts contain bioactive compounds such as flavonoids, carboxylic acids, alkaloids, fatty acids and minerals (mainly K, Si, Mg, Ca, P and Zn). The results showed that all three extracts exerted high antigenotoxic activity. Our findings confirm the beneficial and genoprotective properties of PPP extracts and further studies on the bioactive compounds of Opuntia ficus-indica (L.) Mill. are recommended, as it constitutes a promising plant in pharmaceutical applications.

Optimization of the Extraction Conditions of Antioxidant Phenolic Compounds from Strawberry Fruits (Fragaria x ananassa Duch.) Using Response Surface Methodology

The subject of this study is to determine the best solvent and optimum extraction conditions for the extraction of maximum antioxidant phenolic compounds and antioxidant activity from strawberry fruits (Fragaria x ananassa Duch.). Extractions were carried out using solvents with different polarities (water, methanol, ethanol, acetonitrile, and acetone). Box-Behnken Design was used to optimize extraction conditions, including extraction time (t), temperature (°C), and liquid/solid (L/S) ratio. In the study, extracts obtained with acetone indicated the highest total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity. The optimal extraction conditions for both responses were determined to be time of 17.5 min, temperature 52.5 °C, and liquid/solid ratio of 30:1. The maximum TPC and TFC values were found as 18.78 ± 0.22 mg of gallic acid equivalent (GAE/g) and 10.52 ± 0.35 mg of catechin equivalents (CE/g) under optimum extraction conditions. The results indicated that optimizing extraction conditions is critical for quantifying antioxidant phenolic compounds. The present model can contribute to finding a cheap way of delivering natural antioxidants in the food, cosmeceutical, and pharmaceutical industries. Furthermore, these results indicate that strawberry fruits (Fragaria x ananassa Duch.) can be a natural food colorant in dietary applications with potential health benefits.

Genotoxicity Assessment of Nutraceuticals Extracted from Thinned Nectarine (Prunus persica L.) and Grape Seed (Vitis Vinifera L.) Waste Biomass

Agri-food by-products represent a considerable portion of the waste produced in the world and especially when incorrectly disposed of, contribute to air, soil, and water pollution. Recently, recycling of food waste has proven to be an attractive area of research for pharmaceutical companies, that use agri-food by-products (leaves, bark, roots, seeds, second-best vegetables) as alternative raw material for the extraction of bioactive compounds. Developers and producers are however, advised to assess the safety of nutraceuticals obtained from biowaste that, in virtue of its chemical complexity, could undermine the overall safety of the final products. Here, in compliance with EFSA regulations, we use the Ames test (OECD 471) and the micronucleus test (OECD 487) to assess the mutagenicity of two nutraceuticals obtained from food waste. The first consists of grape seeds (Vitis vinifera L.) that have undergone a process of food-grade depolymerization of proanthocyanidins to release more bioavailable flavan-3-ols. The second nutraceutical product consists of thinned nectarines (Prunus persica L. var nucipersica) containing abscisic acid and polyphenols. The results presented here show that these products are, before as well as after metabolization, non-mutagenic, up to the doses of 5 mg and 100 μg per plate for the Ames and micronucleus test, respectively, and can be thus considered genotoxically safe.

From Foxtail Millet Husk (Waste) to Bioactive Phenolic Extracts Using Deep Eutectic Solvent Extraction and Evaluation of Antioxidant, Acetylcholinesterase, and α-Glucosidase Inhibitory Activities

Foxtail millet husk (FMH) is generally removed and discarded during the first step of millet processing. This study aimed to optimize a method using deep eutectic solvents (DESs) combined with ultrasonic-assisted extraction (UAE) to extract phenols from FMH and to identify the phenolic compositions and evaluate the biological activities. The optimized DES comprised L-lactic acid and glycol with a 1:2 molar ratio by taking the total flavonoid content (TFC) and total phenolic content (TPC) as targets. The extraction parameters were optimized to maximize TFC and TPC, using the following settings: liquid-to-solid ratio of 25 mL/g, DES with water content of 15%, extraction time of 41 min and temperature of 51 °C, and ultrasonic power at 304 W. The optimized UAE-DES, which produced significantly higher TPC, TFC, antioxidant activity, α-glucosidase, and acetylcholinesterase inhibitory activities compared to conventional solvent extraction. Through UPLC–MS, 12 phenolic compounds were identified, with 1-O-p-coumaroylglycerol, apigenin-C-pentosyl-C-hexoside, and 1-O-feruloyl-3-O-p-coumaroylglycerol being the main phenolic components. 1-O-feruloyl-3-O-p-coumaroylglycerol and 3,7-dimethylquercetin were identified first in foxtail millet. Our results indicated that FMH could be exploited by UAE-DES extraction as a useful source of naturally derived antioxidants, along with acetylcholinesterase and α-glucosidase inhibitory activities.

Enhanced production of amylase, pyruvate and phenolic compounds from glucose by light-driven Aspergillus niger-CuS nanobiohybrids

BACKGROUND

The demand for value-added compounds such as amylase, pyruvate and phenolic compounds produced by biological methods has prompted the rapid development of advanced technologies for their enhanced production. Nanobiohybrids (NBs) make use of both the microbial properties of whole-cell microorganisms and the light-harvesting efficiency of semiconductors. Photosynthetic NBs were constructed that link the biosynthetic pathways of Aspergillus niger with CuS nanoparticles.

RESULTS

In this work, NB formation was confirmed by negative values of the interaction energy, i.e., 2.31 × 10⁸ to -5.52 × 10⁸ kJ mol^-1 for CuS-Che NBs, whereas for CuS-Bio NBs the values were -2.31 × 10⁸ to -4.62 × 10⁸ kJ mol^-1 for CuS-Bio NBs with spherical nanoparticle interaction. For CuS-Bio NBs with nanorod interaction, it ranged from -2.3 × 10⁷ to -3.47 × 10⁷ kJ mol^-1 . Further, the morphological changes observed by scanning electron microscopy showed the presence of the elements Cu and S in the energy-dispersive X-ray spectra and the presence of CuS bonds in Fourier transform infrared spectroscopy indicate NB formation. In addition, the quenching effect in photoluminescence studies confirmed NB formation. Production yields of amylase, phenolic compounds and pyruvate amounted to 11.2 μmol L^-1, 52.5 μmol L^-1 and 28 nmol μL^-1, respectively, in A. niger-CuS Bio NBs on the third day of incubation in the bioreactor. Moreover, A niger cells-CuS Bio NBs had amino acids and lipid yields of 6.2 mg mL^-1 and 26.5 mg L^-1, respectively. Furthermore, probable mechanisms for the enhanced production of amylase, pyruvate and phenolic compounds are proposed.

CONCLUSION

Aspergillus niger-CuS NBs were used for the production of the amylase enzyme and value-added compounds such as pyruvate and phenolic compounds. Aspergillus niger-CuS Bio NBs showed a greater efficiency compared to A. niger-CuS Che NBs as the biologically produced CuS nanoparticles had a higher compatibility with A. niger cells. © 2022 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI).

Sustainable recovery of phenolic antioxidants from real olive vegetation water with natural hydrophobic eutectic solvents and terpenoids

Olive oil production leads to the generation of olive mill wastewater (OMWW). Due to the presence of phenolic compounds, they are difficult to process, but they represent a source of high-added value chemicals since they have antioxidant and therapeutic properties. This work has studied the extraction of phenolic compounds from a type of OMWW, olive vegetation water, which presents these compounds in a more diluted dosage than in other studied to date, to revalue this waste stream. A real olive vegetation water from a Spanish olive oil producer was used, and liquid-liquid extraction was applied. Terpenoids and terpene-based hydrophobic eutectic solvents were systematically used to extract phenolic compounds following the concentrations of tyrosol, catechol, caffeic acid, and total phenolic content. By molecular simulation with the COSMO-RS method, 4 terpenoids, and 2 eutectic solvents were selected and compared with 2 conventional solvents. The Solvent/Feed ratio in the extraction of phenolic compounds was studied, showing that the solvents with the highest extraction results were geraniol, eucalyptol, and eutectic solvent menthol + camphor, which outperformed conventional solvents methyl isobutyl ketone and diisopropyl ether. Menthol + camphor gave total phenol extraction yields of 88.73% at a Solvent/Feed ratio in volume of 0.50, surpassing all solvents tested. A solvent reuse and regeneration process was applied by back-extraction of the 4 solvents: FTIR results showed the stability of the solvents while maintaining yields in the solvent reuse process. The phenolic compounds could be concentrated in the alkaline phase to factors up to 49.3 to the initial concentration in olive vegetation water. The alkaline phases were neutralized to obtain a precipitate with a caffeic acid content of up to 26 % wt%, and a tyrosol-rich supernatant with a concentration of up to 6.54 g/L. This work proposes a process using natural solvents to extract phenolic compounds from olive vegetation water.