A new paradigm for muscle contraction

Quantifying Plantar Flexor Muscles Stiffness During Passive and Active Force Generation Using Shear Wave Elastography in Individuals With Chronic Stroke

OBJECTIVES

This study aims to investigate the mechanical properties of paretic and healthy plantar flexor muscles and assesses the spatial distribution of stiffness between the gastrocnemius medialis (GM) and lateralis (GL) during active force generation.

METHODS

Shear wave elastography measurements were conducted on a control group (CNT, n=14; age=59.9±10.6 years; BMI=24.5±2.5 kg/m2) and a stroke survivor group (SSG, n=14; age=63.2±9.6 years; BMI=23.2±2.8 kg/m2). Shear modulus within the GM and GL was obtained during passive ankle mobilization at various angles of dorsiflexion (P0 =0°; P1=10°; P2=20°; P3=-20° and P4=-30°) and during different levels (30%, 50%, 70%, 100%) of maximal voluntary contraction (MVC). Muscle activations of GM, GL, soleus and tibialis anterior were also evaluated.

RESULTS

The results revealed a significant increase in passive stiffness within the paretic plantar flexor muscles under high tension during passive mobilization (p<0.05). Yet, during submaximal and maximal MVC, the paretic plantar flexors exhibited decreased active stiffness levels (p<0.05). A notable discrepancy was found between the stiffness of the GM and GL, with the GM demonstrating greater stiffness from 0° of dorsiflexion in the SSG (p<0.05), and from 10° of dorsiflexion in the CNT (p<0.05). No significant difference in stiffness was observed between the GM and GL muscles during active condition.

CONCLUSION

Stroke affects the mechanical properties differently depending on the state of muscle activation. Notably, the distribution of stiffness among synergistic plantar flexor muscles varied in passive condition, while remaining consistent in active condition.

Sedentary lifestyle of university students is detrimental to the thoracic spine in men and to the lumbar spine in women

BACKGROUND

Sitting for long periods of time and lack of physical activity in young adults can cause postural deterioration leading to rapid onset of fatigue and increase the risk of back pain. We were interested in whether there are gender differences in spinal curvature among university students with a predominantly sedentary lifestyle.

METHODS

20 sedentary female (age 20 ± 0.73 years) and 39 sedentary male university students (age 20 ± 1.08 years) participated in this study. Their thoracic and lumbar curvatures were assessed while standing and sitting using a Spinal Mouse.

RESULTS

In standing, 80.0% of the females and 69.2% of the males had a neutral position of the thoracic spine (33.25° and 35.33°, respectively). However, more males, 30.8%, than females, 10.0%, had hyperkyphosis (54.27° and 47.0°, respectively). Hypokyphosis was found in 10.0% of the females (18.50°) and none in the males. Similarly, 90.0% of the females and 97.4% of the males had neutral position of the lumbar spine (-33.11° and -29.76°, respectively). Increased hyperlordosis was found in 10.0% of the females and 2.6% of the males (-41.0° and -50.0°, respectively). Hypolordosis was not detected in either females or males. In sitting, on the other hand, 70.0% of the females and only 33.3% of the males had a neutral position of the thoracic spine (30.20° and 30.62°, respectively). Increased hyperkyphosis was found in 46.2% of the males (59.76°) and none of the females. 30.0% of the females and 23.1% of the males had light hypokyphosis (47.50° and 46.67°, respectively). Similarly, 70.0% of the females and only 38.5% of the males had a neutral position of the lumbar spine (7.0° and 6.6°, respectively). 35.9% of the males and only 5.0% of the females had a light hypokyphosis (16.14° and 16.0°, respectively). Slightly increased hyperkyphosis was identified in 25.6% of the males and 25.0% of the females (23.9° and 22.5°, respectively).

CONCLUSION

There are significant gender differences in spinal curvature. While in the thoracic spine it was to the detriment of the males when both standing and sitting, in the lumbar spine it is related to the females only when standing. It is therefore necessary to eliminate these spinal deviations in young adults induced by prolonged sitting during university courses by appropriate recovery modalities.

Spatial distribution of stiffness between and within muscles in paretic and healthy individuals during prone and standing positions

This study investigated the inter- and intramuscular variability of plantar flexors stiffness during prone and standing positions at different muscle lengths in healthy and paretic individuals. To access tissue stiffness, shear wave elastography (SWE) measurements were carried out on two groups: control group (CG; n=14; age 43.9±9.6 years; body mass index [BMI]=24.5±2.5 kg/m2) and stroke survivor group (SSG; n=14; age 43.9±9.6 years; BMI=24.5±2.5 kg/m2). Shear Modulus (μ, kPa) within three plantar flexors (the gastrocnemius medialis [GM], gastrocnemius lateralis [GL], and soleus [SOL]) was obtained during two conditions: prone and standing position, at different angles of dorsiflexion (0°, 10°, and 20°). Measurements were also performed in different proximo-distal regions of each muscle. Muscle activation of the GM, GL, SOL, and tibialis anterior were evaluated during the two conditions. Results showed a high spatial stiffness variability between and within plantar flexors during dorsiflexion. The highest stiffness was observed in the GM, especially in the distal region at 20° in healthy and paretic muscles. In the prone position, the paretic muscle exhibits greater stiffness compared to the healthy muscle (p < 0.05). In contrast, in the standing position, an increase of stiffness in the healthy muscle compared to the paretic muscle was observed (p < 0.05). Thus, mechanical properties are differently affected by stroke depending on active and passive states of ankle muscles during dorsiflexion. In addition, the modification of ankle muscle state change stiffness distribution between and within plantar flexors.

Individual Muscle Force Estimation in the Human Forearm Using Multi-Muscle MR Elastography (MM-MRE)

OBJECTIVE

To establish the sensitivity of magnetic resonance elastography (MRE) to active muscle contraction in multiple muscles of the forearm.

METHODS

We combined MRE of forearm muscles with an MRI-compatible device, the MREbot, to simultaneously measure the mechanical properties of tissues in the forearm and the torque applied by the wrist joint during isometric tasks. We measured shear wave speed of thirteen forearm muscles via MRE in a series of contractile states and wrist postures and fit these outputs to a force estimation algorithm based on a musculoskeletal model.

RESULTS

Shear wave speed changed significantly upon several factors, including whether the muscle was recruited as an agonist or antagonist (p = 0.0019), torque amplitude (p = <0.0001), and wrist posture (p = 0.0002). Shear wave speed increased significantly during both agonist (p = <0.0001) and antagonist (p = 0.0448) contraction. Additionally, there was a greater increase in shear wave speed at greater levels of loading. The variations due to these factors indicate the sensitivity to functional loading of muscle. Under the assumption of a quadratic relationship between shear wave speed and muscle force, MRE measurements accounted for an average of 70% of the variance in the measured joint torque.

CONCLUSION

This study shows the ability of MM-MRE to capture variations in individual muscle shear wave speed due to muscle activation and presents a method to estimate individual muscle force through MM-MRE derived measurements of shear wave speed.

SIGNIFICANCE

MM-MRE could be used to establish normal and abnormal muscle co-contraction patterns in muscles of the forearm controlling hand and wrist function.

Relationship between Physical Activity and Sedentary Behavior, Spinal Curvatures, Endurance and Balance of the Trunk Muscles-Extended Physical Health Analysis in Young Adults

BACKGROUND

Physical inactivity and sedentary behavior are associated with poor well-being in young people with adverse effects extending into adulthood. To date, there are many studies investigating the relationship between physical activity (PA) and posture, but there are no data on the relationship between the type and intensity of PA and sedentary behavior, their association with thoracic and lumbar spine angles, and with endurance and balance of the trunk muscles, especially in healthy young adults aged 18-25 years. Moreover, there are no data on the relationship between PA and sedentary behavior and musculoskeletal and cardiopulmonary health, as well as quality of life (QoL) and sleep that would provide a more comprehensive picture of physical health status.

AIM

Therefore, the aim of this cross-sectional study was to investigate the extent to which PA and sedentary behavior are associated with each other and with changes in spinal curvatures, endurance and balance of trunk muscles in an extended analysis of physical health status in young adults aged 18-25 years by additionally including measures of body composition, cardiorespiratory capacity, and QoL and sleep.

METHODS

A total of 82 students (58% female, 42% male) aged 18-25 years completed all required tests. Primary outcome measures included the following: PA and sedentary behavior calculated from the long form of International PA Questionnaire (IPAQ-LF), spinal curvatures measured by a Spinal Mouse® device, endurance and balance of the trunk muscles measured using trunk endurance tests and their ratio.

RESULTS

Overall, 50% of students were classified as minimally active and 50% as health-enhancing PA (HEPA) active. The angles of thoracic kyphosis and lumbar lordosis showed no correlation with PA or time spent sitting. However, students with the lowest PA had significantly higher scores on the trunk extensor endurance test and trunk extensor/flexor endurance test ratio, indicating imbalanced trunk muscles. Moreover, these students spent the most their time sitting. Only PA of vigorous intensity and PA during recreation, leisure, and sports significantly correlated with QoL related to physical health. QoL related to physical and psychosocial health had significantly higher scores when students spent less time sitting. In addition, we found significantly better respiratory performance and SQ at higher PA values, i.e., PA during recreation, leisure, and sport.

CONCLUSIONS

Our results suggest that students with low PA levels and more time spent sitting have imbalanced trunk muscles, worse respiratory function, and poorer QoL and sleep. Moreover, these findings in college students may reflect their lifestyle and suggest that more PA needs to be promoted to prevent the development of chronic diseases including musculoskeletal disorders.

The history-dependent features of muscle force production: A challenge to the cross-bridge theory and their functional implications

The cross-bridge theory predicts that muscle force is determined by muscle length and the velocity of active muscle length changes. However, before the formulation of the cross-bridge theory, it had been observed that the isometric force at a given muscle length is enhanced or depressed depending on active muscle length changes before that given length is reached. These enhanced and depressed force states are termed residual force enhancement (rFE) and residual force depression (rFD), respectively, and together they are known as the history-dependent features of muscle force production. In this review, we introduce early attempts in explaining rFE and rFD before we discuss more recent research from the past 25 years which has contributed to a better understanding of the mechanisms underpinning rFE and rFD. Specifically, we discuss the increasing number of findings on rFE and rFD which challenge the cross-bridge theory and propose that the elastic element titin plays a role in explaining muscle history-dependence. Accordingly, new three-filament models of force production including titin seem to provide better insight into the mechanism of muscle contraction. Complementary to the mechanisms behind muscle history-dependence, we also show various implications for muscle history-dependence on in-vivo human muscle function such as during stretch-shortening cycles. We conclude that titin function needs to be better understood if a new three-filament muscle model which includes titin, is to be established. From an applied perspective, it remains to be elucidated how muscle history-dependence affects locomotion and motor control, and whether history-dependent features can be changed by training.

Electrical impedance myography combined with quantitative assessment techniques in paretic muscle of stroke survivors: Insights and challenges

Aging is a non-modifiable risk factor for stroke and the global burden of stroke is continuing to increase due to the aging society. Muscle dysfunction, common sequela of stroke, has long been of research interests. Therefore, how to accurately assess muscle function is particularly important. Electrical impedance myography (EIM) has proven to be feasible to assess muscle impairment in patients with stroke in terms of micro structures, such as muscle membrane integrity, extracellular and intracellular fluids. However, EIM alone is not sufficient to assess muscle function comprehensively given the complex contributors to paretic muscle after an insult. This article discusses the potential to combine EIM and other common quantitative methods as ways to improve the assessment of muscle function in stroke survivors. Clinically, these combined assessments provide not only a distinct advantage for greater accuracy of muscle assessment through cross-validation, but also the physiological explanation on muscle dysfunction at the micro level. Different combinations of assessments are discussed with insights for different purposes. The assessments of morphological, mechanical and contractile properties combined with EIM are focused since changes in muscle structures, tone and strength directly reflect the muscle function of stroke survivors. With advances in computational technology, finite element model and machine learning model that incorporate multi-modal evaluation parameters to enable the establishment of predictive or diagnostic model will be the next step forward to assess muscle function for individual with stroke.

Biceps Brachii and Brachioradialis Excitation in Biceps Curl Exercise: Different Handgrips, Different Synergy

The current study analyzed the excitation of biceps brachii, brachioradialis, and anterior deltoid during bilateral biceps curl performed with different handgrips. Ten competitive bodybuilders performed bilateral biceps curl in non-exhaustive 6-rep sets using 8-RM with the forearm in supinated, pronated, and neutral positions. The ascending and descending phase of each variation was separately analyzed using the normalized root mean square collected using surface electromyography. During the ascending phase, (i) biceps brachii excitation was greater with the supinated compared to the pronated [+19(7)%, ES: 2.60] and neutral handgrip [+12(9)%, ES: 1.24], (ii) the brachioradialis showed greater excitation with the supinated compared to the pronated [+5(4)%, ES: 1.01] and neutral handgrip [+6(5)%, ES: 1.10], (iii) the anterior deltoid excitation was greater with the pronated and neutral handgrip compared to the supinated condition [+6(3)% and +9(2)%, ES: 2.07 and 3.18, respectively]. During the descending phase, the anterior deltoid showed greater excitation in the pronated compared to the supinated handgrip [+5(4)%, ES: 1.02]. Changing the handgrips when performing biceps curl induces specific variations in biceps brachii and brachioradialis excitation and requires different anterior deltoid interventions for stabilizing the humeral head. Practitioners should consider including different handgrips in the biceps curl routine to vary the neural and mechanical stimuli.

In vivoestimation of anisotropic mechanical properties of the gastrocnemius during functional loading with MR elastography

Objective.In vivoimaging assessments of skeletal muscle structure and function allow for longitudinal quantification of tissue health. Magnetic resonance elastography (MRE) non-invasively quantifies tissue mechanical properties, allowing for evaluation of skeletal muscle biomechanics in response to loading, creating a better understanding of muscle functional health.Approach. In this study, we analyze the anisotropic mechanical response of calf muscles using MRE with a transversely isotropic, nonlinear inversion algorithm (TI-NLI) to investigate the role of muscle fiber stiffening under load. We estimate anisotropic material parameters including fiber shear stiffness (μ1), substrate shear stiffness (μ2), shear anisotropy (ϕ), and tensile anisotropy (ζ) of the gastrocnemius muscle in response to both passive and active tension.Main results. In passive tension, we found a significant increase inμ1,ϕ,andζwith increasing muscle length. While in active tension, we observed increasingμ2and decreasingϕandζduring active dorsiflexion and plantarflexion-indicating less anisotropy-with greater effects when the muscles act as agonist.Significance. The study demonstrates the ability of this anisotropic MRE method to capture the multifaceted mechanical response of skeletal muscle to tissue loading from muscle lengthening and contraction.

Bilateral Biceps Curl Shows Distinct Biceps Brachii and Anterior Deltoid Excitation Comparing Straight vs. EZ Barbell Coupled with Arms Flexion/No-Flexion

The present study investigated the excitation of the biceps brachii and anterior deltoid during bilateral biceps curl performed using the straight vs. EZ barbell and with or without flexing the arms. Ten competitive bodybuilders performed bilateral biceps curl in non-exhaustive 6-rep sets using 8-RM in four variations: using the straight barbell flexing (ST_flex) or not flexing the arms (ST_no-flex) or the EZ barbell flexing (EZ_flex) or not flexing the arms (EZ_no-flex). The ascending and descending phases were separately analyzed using the normalized root mean square (nRMS) collected using surface electro-myography. For the biceps brachii, during the ascending phase, a greater nRMS was observed in ST_no-flex vs. EZ_no-flex (+1.8%, effect size [ES]: 0.74), in ST_flex vs. ST_no-flex (+17.7%, ES: 3.93) and in EZ_flex vs. EZ_no-flex (+20.3%, ES: 5.87). During the descending phase, a greater nRMS was observed in ST_flex vs. EZ_flex (+3.8%, ES: 1.15), in ST_no-flex vs. ST_flex (+2.8%, ES: 0.86) and in EZ_no-flex vs. EZ_flex (+8.1%, ES: 1.81). The anterior deltoid showed distinct excitation based on the arm flexion/no-flexion. A slight advantage in biceps brachii excitation appears when using the straight vs. EZ barbell. Flexing or not flexing the arms seems to uniquely excite the biceps brachii and anterior deltoid. Practitioners should consider including different bilateral biceps barbell curls in their routine to vary the neural and mechanical stimuli.

Anisotropic dense collagen hydrogels with two ranges of porosity to mimic the skeletal muscle extracellular matrix

Despite the crucial role of the extracellular matrix (ECM) in the organotypic organization and function of skeletal muscles, most 3D models do not mimic its specific characteristics, namely its biochemical composition, stiffness, anisotropy, and porosity. Here, a novel 3D in vitro model of muscle ECM was developed reproducing these four crucial characteristics of the native ECM. An anisotropic hydrogel mimicking the muscle fascia was obtained thanks to unidirectional 3D printing of dense collagen with aligned collagen fibrils. The space between the different layers was tuned to generate an intrinsic network of pores (100 μm) suitable for nutrient and oxygen diffusion. By modulating the gelling conditions, the mechanical properties of the construct reached those measured in the physiological muscle ECM. This artificial matrix was thus evaluated for myoblast differentiation. The addition of large channels (600 μm) by molding permitted to create a second range of porosity suitable for cell colonization without altering the physical properties of the hydrogel. Skeletal myoblasts embedded in Matrigel®, seeded within the channels, organized in 3D, and differentiated into multinucleated myotubes. These results show that porous and anisotropic dense collagen hydrogels are promising biomaterials to model skeletal muscle ECM.

Role of Muscle LIM Protein in Mechanotransduction Process

The induction of protein synthesis is crucial to counteract the deconditioning of neuromuscular system and its atrophy. In the past, hormones and cytokines acting as growth factors involved in the intracellular events of these processes have been identified, while the implications of signaling pathways associated with the anabolism/catabolism ratio in reference to the molecular mechanism of skeletal muscle hypertrophy have been recently identified. Among them, the mechanotransduction resulting from a mechanical stress applied to the cell appears increasingly interesting as a potential pathway for therapeutic intervention. At present, there is an open question regarding the type of stress to apply in order to induce anabolic events or the type of mechanical strain with respect to the possible mechanosensing and mechanotransduction processes involved in muscle cells protein synthesis. This review is focused on the muscle LIM protein (MLP), a structural and mechanosensing protein with a LIM domain, which is expressed in the sarcomere and costamere of striated muscle cells. It acts as a transcriptional cofactor during cell proliferation after its nuclear translocation during the anabolic process of differentiation and rebuilding. Moreover, we discuss the possible opportunity of stimulating this mechanotransduction process to counteract the muscle atrophy induced by anabolic versus catabolic disorders coming from the environment, aging or myopathies.

Increased Stiffness of the Superficial Cervical Extensor Muscles in Patients With Cervicogenic Headache: A Study Using Shear Wave Elastography

Background

Cervicogenic headache (CEH) is a secondary headache caused by lesions of the cervical spine and surrounding soft tissues. Cervical muscle dysfunction may be related to the onset of CEH. However, whether cervical muscle stiffness changes in patients with CEH has not been well studied. The purpose of this study was to explore changes in superficial cervical extensor muscle stiffness in patients with CEH using shear wave elastography (SWE).

Methods

In this study, 19 patients with CEH and 20 healthy controls were recruited. Superficial cervical extensor muscle stiffness was obtained from SWE, and the SuperLinear SL10-2 MHz linear array probe in the musculoskeletal muscle mode was chosen as the transducer. Regions of interest in the trapezius (TRAP), splenius capitis (SPL), semispinalis capitis (SCap), and semispinalis cervicis (SCer) were manually segmented. Correlations between superficial cervical extensor muscle stiffness and visual analog scale (VAS) scores, age, and body mass index (BMI) were analyzed using Pearson's correlation. Receiver operating characteristic (ROC) curve was used to investigate the diagnostic ability of superficial cervical extensor stiffness for CEH.

Results

Superficial cervical extensor muscle stiffness on the headache side of patients with CEH was higher than that on the non-headache side and in healthy controls (p < 0.05). Increased stiffness was also observed in SCer on the non-headache side of patients with CEH compared to healthy controls (p < 0.01). In patients with CEH, SCer stiffness was positively correlated with VAS scores (r = 0.481, p = 0.037), but no correlation was found between other muscles and VAS scores (p > 0.05). The areas under the curve of TRAP, SPL, SCap, and SCer in diagnosing CEH were 0.766, 0.759, 0.964, and 1.000, respectively.

Conclusions

Increased stiffness was observed in the superficial cervical extensor muscles on the headache side of patients with CEH. SCer stiffness was correlated with headache intensity in patients with CEH and may provide clues for the diagnosis of CEH.

What Can We Learn from Single Sarcomere and Myofibril Preparations?

Sarcomeres are the smallest functional contractile unit of muscle, and myofibrils are striated muscle organelles that are comprised of sarcomeres that are strictly aligned in series. Furthermore, passive forces in sarcomeres and myofibrils are almost exclusively produced by the structural protein titin, and all contractile, regulatory, and structural proteins are in their natural configuration. For these mechanical and structural reasons single sarcomere and myofibril preparations are arguably the most powerful to answer questions on the mechanisms of striated muscle contraction. We developed and optimized single myofibril research over the past 20 years and were the first to mechanically isolate and test single sarcomeres. The results from this research led to the uncovering of the crucial role of titin in muscle contraction, first molecular explanations for the origins of the passive and the residual force enhancement properties of skeletal and cardiac muscles, the discovery of sarcomere length stability on the descending limb of the force-length relationship, and culminating in the formulation of the three-filament theory of muscle contraction that, aside from actin and myosin, proposes a crucial role of titin in active force production. Aside from all the advantages and possibilities that single sarcomere and myofibril preparations offer, there are also disadvantages. These include the fragility of the preparation, the time-consuming training to master these preparations, the limited spatial resolution for length and force measurements, and the unavailability of commercial systems for single sarcomere/myofibril research. Ignoring the mechanics that govern serially linked systems, not considering the spatial resolution and associated accuracies of myofibril systems, and neglecting the fragility of myofibril preparations, has led to erroneous interpretations of results and misleading conclusions. Here, we will attempt to describe the methods and possible applications of single sarcomere/myofibril research and discuss the advantages and disadvantages by focusing on specific applications. It is hoped that this discussion may contribute to identifying the enormous potential of single sarcomere/myofibril research in discovering the secrets of muscle contraction.

Toward Real-Time Muscle Force Inference and Device Control via Optical-Flow-Tracked Muscle Deformation

Despite the utility of musculoskeletal dynamics modeling, there exists no safe, noninvasive method of measuring in vivo muscle output force in real time - limiting both biomechanical insight into dexterous motion and intuitive control of assistive devices. In this paper, we demonstrate that muscle deformation constitutes a promising, yet unexplored signal from which to 1) infer such forces and 2) build novel device control schemes. Through a case study of the elbow joint on a preliminary cohort of 10 subjects, we show that muscle deformation (specifically, thickness change of the brachioradialis, as measured via ultrasound and tracked via optical flow) correlates well with elbow output force to an extent comparable with standard surface electromyography (sEMG) activation during varied isometric elbow contraction. We then show that, given real-time visual feedback, subjects can readily perform a trajectory tracking task using this deformation signal, and that they largely prefer this method to a comparable sEMG-based control scheme and perform the tracking task with similar accuracy. Together, these contributions illustrate muscle deformation's potential utility for both biomechanical study of individual muscle dynamics and device control, in a manner that - thanks to, unlike sEMG, the localized nature of the signal and its tight mechanistic coupling to output force - is readily extensible to multiple muscles and device degrees of freedom. To enable such future extensions, all modeling, tracking, and visualization software described in this paper, as well as all raw and processed data, have been made available on SimTK as part of the Open-Arm project (https://simtk.org/projects/openarm) for general research use.

The association of reactive balance control and spinal curvature under lumbar muscle fatigue

Background

Although low back fatigue is an important intervening factor for physical functioning among sedentary people, little is known about its possible significance in relation to the spinal posture and compensatory postural responses to unpredictable stimuli. This study investigates the effect of lumbar muscle fatigue on spinal curvature and reactive balance control in response to externally induced perturbations.

Methods

A group of 38 young sedentary individuals underwent a perturbation-based balance test by applying a 2 kg load release. Sagittal spinal curvature and pelvic tilt was measured in both a normal and Matthiass standing posture both with and without a hand-held 2 kg load, and before and after the Sørensen fatigue test.

Results

Both the peak anterior and peak posterior center of pressure (CoP) displacements and the corresponding time to peak anterior and peak posterior CoP displacements significantly increased after the Sørensen fatigue test (all at p < 0.001). A lumbar muscle fatigue led to a decrease of the lumbar lordosis in the Matthiass posture while holding a 2 kg load in front of the body when compared to pre-fatigue conditions both without a load (p = 0.011, d = 0.35) and with a 2 kg load (p = 0.000, d = 0.51). Also the sacral inclination in the Matthiass posture with a 2 kg additional load significantly decreased under fatigue when compared to all postures in pre-fatigue conditions (p = 0.01, d = 0.48). Contrary to pre-fatigue conditions, variables of the perturbation-based balance test were closely associated with those of lumbar curvature while standing in the Matthiass posture with a 2 kg additional load after the Sørensen fatigue test (r values in range from −0.520 to −0.631, all at p < 0.05).

Conclusion

These findings indicate that lumbar muscle fatigue causes changes in the lumbar spinal curvature and this is functionally relevant in explaining the impaired ability to maintain balance after externally induced perturbations. This emphasizes the importance for assessing both spinal posture and reactive balance control under fatigue in order to reveal their interrelations in young sedentary adults and predict any significant deterioration in later years.

Effect of Active Lengthening and Shortening on Small-Angle X-ray Reflections in Skinned Skeletal Muscle Fibres

Our purpose was to use small-angle X-ray diffraction to investigate the structural changes within sarcomeres at steady-state isometric contraction following active lengthening and shortening, compared to purely isometric contractions performed at the same final lengths. We examined force, stiffness, and the 1,0 and 1,1 equatorial and M3 and M6 meridional reflections in skinned rabbit psoas bundles, at steady-state isometric contraction following active lengthening to a sarcomere length of 3.0 µm (15.4% initial bundle length at 7.7% bundle length/s), and active shortening to a sarcomere length of 2.6 µm (15.4% bundle length at 7.7% bundle length/s), and during purely isometric reference contractions at the corresponding sarcomere lengths. Compared to the reference contraction, the isometric contraction after active lengthening was associated with an increase in force (i.e., residual force enhancement) and M3 spacing, no change in stiffness and the intensity ratio I_1,1/I_1,0, and decreased lattice spacing and M3 intensity. Compared to the reference contraction, the isometric contraction after active shortening resulted in decreased force, stiffness, I_1,1/I_1,0, M3 and M6 spacings, and M3 intensity. This suggests that residual force enhancement is achieved without an increase in the proportion of attached cross-bridges, and that force depression is accompanied by a decrease in the proportion of attached cross-bridges. Furthermore, the steady-state isometric contraction following active lengthening and shortening is accompanied by an increase in cross-bridge dispersion and/or a change in the cross-bridge conformation compared to the reference contractions.

Effects of Hip Flexion on Knee Extension and Flexion Isokinetic Angle-Specific Torques and HQ-Ratios

Background and Methods

During isokinetic knee strength testing, the knee flexion angles that correspond to the measured torque values are rarely considered. Additionally, the hip flexion angle during seated testing diverges from that in the majority of daily life and sporting activities. Limited information concerning the influence of hip angle, muscle contraction mode, and velocity on the isokinetic knee strength over the entire range of motion (ROM) is available.

Twenty recreational athletes (10 females, 10 males; 23.3 ± 3.2 years; 72.1 ± 16.5 kg; 1.78 ± 0.07 m) were tested for isokinetic knee flexion and extension at 10° and 90° hip flexion with the following conditions: (i) concentric at 60°/s, (ii) concentric at 180°/s, and (iii) eccentric at 60°/s. The effects of hip angle, contraction mode, and velocity on angle-specific torques and HQ-ratios as well as conventional parameters (peak torques, angles at peak torque, and HQ-ratios) were analyzed using statistical parametric mapping and parametric ANOVAs, respectively.

Results

Generally, the angle-specific and conventional torques and HQ-ratios were lower in the extended hip compared to a flexed hip joint. Thereby, in comparison to the knee extension, the torque values decreased to a greater extent during knee flexion but not consistent over the entire ROM. The torque values were greater at the lower velocity and eccentric mode, but the influence of the velocity and contraction mode were lower at shorter and greater muscle lengths, respectively.

Conclusions

Isokinetic knee strength is influenced by the hip flexion angle. Therefore, a seated position during testing and training is questionable, because the hip joint is rarely flexed at 90° during daily life and sporting activities. Maximum knee strength is lower in supine position, which should be considered for training and testing. The angle-specific effects cannot be mirrored by the conventional parameters. Therefore, angle-specific analyses are recommended to obtain supplemental information and consequently to improve knee strength testing.

Increased force following muscle stretching and simultaneous fibre shortening: Residual force enhancement or force depression - That is the question?

Residual force enhancement (rFE) describes the increase in isometric force following muscle stretching compared to the corresponding isometric force. Even though rFE is consistently observed in isolated muscle preparations, it is not always observed in human skeletal muscle. This inconsistency might be associated with disociations between length changes in muscle tendon units (MTUs) and fibres. This prompted the question if there is rFE for conditions where the MTU is stretched while fibres shorten. Rabbit tibialis anterior (TA) MTUs (n = 4) were stretched and the isometric forces following stretching were compared to corresponding forces from isometric reference contractions. Unique combinations of stretch speed and activation were used to create conditions of continuous fibre shortening during MTU stretch. Mean force was increased (18 ± 2%) following MTU stretching compared to the isometric reference forces. Without fibre length measurements, this result would be referred to as rFE. However, fibre shortening in the reference contractions was always greater than for the eccentric stretch contractions, suggesting that the observed increase in force might be caused by less residual force depression (rFD) in the stretch tests compared to the reference contractions. However, the work performed by fibre shortening was similar between the reference and the MTU stretch contractions, suggesting that rFD was similar for both experimental conditions. Therefore, we conclude that we observed rFE in the absence of contractile element stretching. However, a lack of knowledge of the molecular mechanisms that distinguish rFE from rFD prevents an unequivocal pronouncement of what caused the enhanced forces after active muscle stretching.

The stretch-shortening cycle effect is prominent in the inhibited force state

It has been suggested that residual force enhancement (RFE) contributes to the work enhancement observed in stretch-shortening cycles (SSC). Based on recent findings that RFE was preserved in the reduced force state, one may speculate that the SSC effect may be preserved in the reduced force state as well. The purpose of this study was to examine the magnitude of the SSC effect in inhibited skeletal muscle force states. Normal and inhibited force conditions were analyzed using skinned rabbit soleus fibres (N = 18). The inhibited force condition was achieved by adding 2,3-Butanedione monoxime into the activating solution. For both conditions, a SSC test and a pure shortening test were performed. In the SSC tests, fibres were activated at an average sarcomere length of 2.4 μm, and then stretched to 3.0 μm. Immediately after the end of the stretch, fibres were shortened to 2.4 μm. In the pure shortening tests, fibres were activated at an average sarcomere length of 3.0 μm and then shortened to 2.4 μm. The relative increase in mechanical work in the shortening phase of the SSC compared to the pure shortening condition was defined as the SSC effect index, and the magnitude of the SSC effect was compared between the normal and the inhibited force condition. The SSC effect was greater in the inhibited compared to the normal force condition (p < 0.001). We conclude that the SSC effect is at least in part preserved in the reduced force state.

History-dependence of muscle slack length in humans: effects of contraction intensity, stretch amplitude, and time

The slack length of a relaxed skeletal muscle can be reduced by isometric contraction at short lengths ("contract-short conditioning"). This study explored how the effect of contract-short conditioning on muscle slack length is modified by 1) the intensity of the contraction, 2) the delay between the contraction and measurement of slack length, and 3) the amplitude of a stretch delivered to the relaxed muscle after the contraction. Muscle fascicles in the human vastus lateralis muscle were observed with ultrasound imaging while the relaxed muscle was lengthened by flexing the knee. The knee angle at which muscle fascicle slack was taken up was used as a proxy for muscle slack length. Conditioning the muscle with voluntary isometric (fixed-end) contractions at short muscle lengths reduced vastus lateralis muscle slack length, measured 60 s later, by a mean of 10°. This effect was independent of contraction intensity from 5% to 100% maximal voluntary contraction. The effect was largest when first observed 5 s after the contraction, decayed about one-third by 60 s, and then remained nearly constant until the last observation 5 min after the contraction. A slow stretch given to the relaxed muscle after contract-short conditioning increased slack length (i.e., reduced the effect of contract-short conditioning). Slack length increased nonlinearly with stretch amplitude. Very large stretches (>30°, possibly as large as 90°) were required to abolish the effect of contract-short conditioning. The phenomena described here share some characteristics with, and may involve similar mechanisms to, passive force enhancement and muscle thixotropy.NEW & NOTEWORTHY The slack length of a relaxed human skeletal muscle is not fixed; it can be modified by contraction and stretch. Contraction of the human vastus lateralis muscle at short lengths reduces the muscle's slack length. Even very weak contractions are sufficient to induce this effect. The effect persists for at least 5 min but can be reduced or abolished with a large-amplitude passive stretch.

Residual and passive force enhancement in skinned cardiac fibre bundles

In skeletal muscle, steady-state force is consistently greater following active stretch than during a purely isometric contraction at the same length (residual force enhancement; RFE). Similarly, when deactivated, the force remains higher following active stretch than following an isometric condition (passive force enhancement; PFE). RFE and PFE have been associated with the sarcomere protein titin, but skeletal and cardiac titin have different structures, and results regarding RFE in cardiac muscle have been inconsistent and contradictory. Therefore, the purpose of this study was to determine if cardiac muscle exhibits RFE and PFE. Skinned fibre bundles (n = 10) were activated isometrically at a sarcomere length of 2.2 μm and actively stretched by 15% of their length. The resultant active and passive forces were compared to the corresponding forces obtained for purely isometric contractions at the long length. RFE was observed in all fibre bundles, averaging 5.5 ± 2.5% (ranging from 2.3 to 9.4%). PFE was observed in nine of the ten bundles, averaging 11.1 ± 6.5% (ranging from -2.1 to 18.7%). Stiffness was not different between the active isometric and the force enhanced conditions, but was higher following deactivation from the force-enhanced compared to the isometric reference state. We conclude that there is RFE and PFE in cardiac muscle. We speculate that cardiac muscle has the same RFE capability as skeletal muscle, and that the most likely mechanism for the RFE and PFE is the engagement of a passive structural element during active stretching.

The Mechanical Power of Titin Folding

The delivery of mechanical power, a crucial component of animal motion, is constrained by the universal compromise between the force and the velocity of its constituent molecular systems. While the mechanisms of force generation have been studied at the single molecular motor level, there is little understanding of the magnitude of power that can be generated by folding proteins. Here, we use single-molecule force spectroscopy techniques to measure the force-velocity relation of folding titin domains that contain single internal disulfide bonds, a common feature throughout the titin I-band. We find that formation of the disulfide regulates the peak power output of protein folding in an all-or-none manner, providing at 6.0 pN, for example, a boost from 0 to 6,000 zW upon oxidation. This mechanism of power generation from protein folding is of great importance for muscle, where titin domains may unfold and refold with each extension and contraction of the sarcomere.

Eckels et al. use single-molecule magnetic tweezers to simultaneously probe the folding dynamics of titin Ig domains and monitor the redox status of single disulfides within the Ig fold. Oxidation of the disulfide bond greatly increases both the folding force and the magnitude of power delivered by protein folding.

The Multi-Scale, Three-Dimensional Nature of Skeletal Muscle Contraction

Muscle contraction is a three-dimensional process, as anyone who has observed a bulging muscle knows. Recent studies suggest that the three-dimensional nature of muscle contraction influences its mechanical output. Shape changes and radial forces appear to be important across scales of organization. Muscle architectural gearing is an emerging example of this process.

Relationships of hip abductor strength, neuromuscular control, and hip width to femoral length ratio with peak hip adduction angle in healthy female runners

A large peak hip adduction angle during running is a risk factor for several overuse injuries in women. The purpose of this study was to determine if female runners with a large peak hip adduction angle have differences in eccentric hip abductor muscle strength, hip neuromuscular control, and/or hip width to femoral length ratio (HW:FL) compared to those with a small angle. Hip adduction during running, hip strength, hip control, and HW:FL were measured in sixty healthy female runners (1.66 ± 0.06 m; 63.2 ± 8.3 kg; 27 ± 6 years). Data from twenty runners with the largest and twenty with the smallest peak hip adduction angles were analysed. Between-group differences in hip strength, control, and HW:FL were determined using independent t-tests (p < 0.05). Variables that were significantly different between groups were entered into a regression model. Runners in both groups had similar hip strength (p = 0.90) and control (p = 0.65). HW:FL was greater in the large peak angle group (p = 0.04), but only explained a small amount of peak hip adduction angle variance for all sixty runners (R² = 0.05). Alarge peak hip adduction angle in some healthy female runners may simply be instinctive as there were no deficiencies in the strength or neuromuscular control constructs assessed.

Age-specific differences in the time-frequency representation of surface electromyographic data recorded during a submaximal cyclic back extension exercise: a promising biomarker to detect early signs of sarcopenia

PURPOSE

Motivated by the goal of developing new methods to detect early signs of sarcopenia, we investigated if surface electromyographic (SEMG) data recorded during the performance of cyclic, submaximal back extensions are marked by age-specific differences in their time and frequency characteristics. Furthermore, day-to-day retest reliability of the EMG measures was examined.

METHODS

A total of 86 healthy volunteers used a back dynamometer to perform a series of three maximal voluntary contractions (MVC) consisting of isometric back extensions, followed by an isometric back extension at 80% MVC, and finally 25 slow cyclic back extensions at 50% MVC. SEMG data was recorded bilaterally at L1, L2, and L5 from the iliocostalis lumborum, longissimus, and multifidus muscles, respectively. Tests were repeated two days and six weeks later. A linear mixed-effects model with fixed effects "age, sex, test number" and the random effect "person" was performed to investigate age-specific differences in both the initial value and the time-course (as defined by the slope of the regression line) of the root mean square (RMS-SEMG) values and instantaneous median frequency (IMDF-SEMG) values calculated separately for the shortening and lengthening phases of the exercise cycles. Generalizability Theory was used to examine reliability of the EMG measures.

RESULTS

Back extensor strength was comparable in younger and older adults. The initial value of RMS-SEMG and IMDF-SEMG as well as the RMS-SEMG time-course did not significantly differ between the two age groups. Conversely, the IMDF-SEMG time-course showed more rapid changes in younger than in older individuals. Absolute and relative reliability of the SEMG time-frequency representations were comparable in older and younger individuals with good to excellent relative reliability but variable absolute reliability levels.

CONCLUSIONS

The IMDF-SEMG time-course derived from submaximal, cyclic back extension exercises performed at moderate effort showed significant differences in younger vs. older adults even though back extension strength was found to be comparable in the two age groups. We conclude that the SEMG method proposed in this study has great potential to be used as a biomarker to detect early signs of sarcopenic back muscle function.

History-dependent perturbation response in limb muscle

Muscle mediates movement but movement is typically unsteady and perturbed. Muscle is known to behave non-linearly and with history-dependent properties during steady locomotion, but the importance of history dependence in mediating muscle function during perturbations remains less clear. To explore the capacity of muscles to mitigate perturbations during locomotion, we constructed a series of perturbations that varied only in kinematic history, keeping instantaneous position, velocity and time from stimulation constant. We found that the response of muscle to a perturbation is profoundly history dependent, varying 4-fold as baseline frequency changes, and dissipating energy equivalent to ∼6 times the kinetic energy of all the limbs in 5 ms (nearly 2400 W kg^-1). Muscle energy dissipation during a perturbation is predicted primarily by the force at the onset of the perturbation. This relationship holds across different frequencies and timings of stimulation. This history dependence behaves like a viscoelastic memory producing perturbation responses that vary with the frequency of the underlying movement.

Specific prime movers' excitation during free-weight bench press variations and chest press machine in competitive bodybuilders

The current study compared the muscle excitation in free-weight bench press variations and chest press machine. Ten competitive bodybuilders were recruited. The EMG-RMS amplitude of clavicular and sternocostal head of pectoralis major, long head of triceps brachii and anterior and lateral deltoid was recorded while performing horizontal (BP), inclined (45°) (IBP) or declined (-15°) bench press (DBP) and chest press machine (CP). Four non-exhaustive repetitions were performed using 80% of 1-repetition maximum of each exercise. Both concentric and eccentric phases were recorded. During the concentric phase, [d effect size: 2.78/7.80] clavicular head was more excited in IBP and less excited in CP (d: -9.69/-4.39) compared to all other exercises. The sternocostal head was similarly excited in DBP vs. BP and BP vs. CP and more excited (d: 2.42/9.92) compared to IBP. Triceps brachii excitation was overall greater (d: 2.01/6.75) in BP and DBP compared to all other exercises. Anterior deltoid was less excited (d: 3.84/19.77) in DBP compared to all other exercises. Lateral deltoid excitation was greater (d: 0.96/3.10) in BP, IBP and DBP compared to CP. Muscle excitation during the eccentric phase followed a similar pattern, with the exception of the greater (d: 3.89/11.32) excitation in the clavicular head in BP compared to all other exercises. The present outcomes showed that the excitation of the clavicular and sternocostal head of pectoralis major depends on the bench inclination angle. The use of BP variations vs. CP allows overall greater triceps brachii and lateral deltoid excitation, due to the greater instability.

Implementing Eccentric Resistance Training-Part 1: A Brief Review of Existing Methods

The purpose of this review was to provide a physiological rationale for the use of eccentric resistance training and to provide an overview of the most commonly prescribed eccentric training methods. Based on the existing literature, there is a strong physiological rationale for the incorporation of eccentric training into a training program for an individual seeking to maximize muscle size, strength, and power. Specific adaptations may include an increase in muscle cross-sectional area, force output, and fiber shortening velocities, all of which have the potential to benefit power production characteristics. Tempo eccentric training, flywheel inertial training, accentuated eccentric loading, and plyometric training are commonly implemented in applied contexts. These methods tend to involve different force absorption characteristics and thus, overload the muscle or musculotendinous unit in different ways during lengthening actions. For this reason, they may produce different magnitudes of improvement in hypertrophy, strength, and power. The constraints to which they are implemented can have a marked effect on the characteristics of force absorption and therefore, could affect the nature of the adaptive response. However, the versatility of the constraints when prescribing these methods mean that they can be effectively implemented to induce these adaptations within a variety of populations.

Musculoskeletal application and validation of speckle-tracking ultrasonography

Background

Diseased, injured, or dysfunctional skeletal muscles may demonstrate abnormal function and contractility. Currently, only few in vivo imaging techniques are able to characterize the contractile properties of muscle tissue. This study aimed to test the hypothesis that muscle strain can be tracked in two upper extremity skeletal muscles by speckle-tracking ultrasonography (STU) and correlates with isometric muscle contractions.

Methods

A convenience sample of 10 healthy, adult volunteers with normal shoulder function were tested. The 5 women and 5 men had a mean age of 45 years (range: 39–59 years) and BMI < 30. STU was applied to the supraspinatus (SS) and biceps brachii (BB) muscles using a M11 L-MHz linear transducer (frequency 8–15 MHz) hooked to a Vivid E 9TM ultrasound machine. Strain validation was performed by correlating peak strain against standardized sub-maximal, isometric load conditions of the two muscles (20–80% of maximal voluntary contraction) using a custom-built muscle dynamometer based on strain-gauge technique. Data were analyzed offline using the EchoPac speckle-tracking software and were blinded to the examiner.

Results

Intramuscular strain measured by STU in the SS and BB muscles showed moderate to strong correlations with external muscle load (SS: r = − 0.76, p < 0.0001 and BB: r = − 0.60, p < 0.0001). We found strain to vary from approximately 10–20% during increasing submaximal, isometric conditions.

Conclusions

We demonstrate that STU can be applied on healthy skeletal musculature (SS and BB muscles). The observed correlations between strain and isometric contractions suggest a valid technique. However, the concept of measuring muscle strain non-invasively needs further investigation for validity, accuracy, responsiveness, and reliability before its therapeutic and research potential can be realized.

A micromechanical muscle model for determining the impact of motor unit fiber clustering on force transmission in aging skeletal muscle

This study used a micromechanical finite element muscle model to investigate the effects of the redistribution of spatial activation patterns in young and old muscle. The geometry consisted of a bundle of 19 active muscle fibers encased in endomysium sheets, surrounded by passive tissue to model a fascicle. Force was induced by activating combinations of the 19 active muscle fibers. The spacial clustering of muscle fibers modeled in this study showed unbalanced strains suggesting tissue damage at higher strain levels may occur during higher levels of activation and/or during dynamic conditions. These patterns of motor unit remodeling are one of the consequences of motor unit loss and reinnervation associated with aging. The results did not reveal evident quantitative changes in force transmission between old and young adults, but the patterns of stress and strain distribution were affected, suggesting an uneven distribution of the forces may occur within the fascicle that could provide a mechanism for muscle injury in older muscle.

On sarcomere length stability during isometric and post-active-stretch isometric contractions

Sarcomere length (SL) instability and SL non-uniformity have been used to explain fundamental properties of skeletal muscles, such as creep, force depression following active muscle shortening, and residual force enhancement following active stretching of muscles. Regarding residual force enhancement, it has been argued that active muscle stretching causes SL instability, thereby increasing SL non-uniformity. However, we recently showed that SL non-uniformity is not increased by active muscle stretching, but it remains unclear if SL stability is affected by active stretching. Here, we used single myofibrils of rabbit psoas and measured SL non-uniformity and SL instability during isometric contractions and for isometric contractions following active stretching at average SLs corresponding to the descending limb of the force-length relationship. We defined isometric contractions as contractions during which mean SL remained constant. SL instability was quantified by the rate of change of individual SLs over the course of steady state, isometric force; and SL non-uniformity was defined as deviations of SLs from the mean SL at an instant of time. We found that while the mean SL remained constant during isometric contraction, by definition, individual SLs did not. SLs were more stable in the force-enhanced, isometric state following active stretching compared to the isometric reference state. We also found that SL instability was not correlated with the rate of change of SL non-uniformity. Also, SL non-uniformity was not different in the isometric and the post-stretch isometric contractions. We conclude that since SL is more stable but similarly non-uniform in the force-enhanced compared to the corresponding isometric reference contraction, it appears unlikely that either SL instability or SL non-uniformity contribute to the residual force enhancement property of skeletal muscle.

The Importance of Muscular Strength: Training Considerations

This review covers underlying physiological characteristics and training considerations that may affect muscular strength including improving maximal force expression and time-limited force expression. Strength is underpinned by a combination of morphological and neural factors including muscle cross-sectional area and architecture, musculotendinous stiffness, motor unit recruitment, rate coding, motor unit synchronization, and neuromuscular inhibition. Although single- and multi-targeted block periodization models may produce the greatest strength-power benefits, concepts within each model must be considered within the limitations of the sport, athletes, and schedules. Bilateral training, eccentric training and accentuated eccentric loading, and variable resistance training may produce the greatest comprehensive strength adaptations. Bodyweight exercise, isolation exercises, plyometric exercise, unilateral exercise, and kettlebell training may be limited in their potential to improve maximal strength but are still relevant to strength development by challenging time-limited force expression and differentially challenging motor demands. Training to failure may not be necessary to improve maximum muscular strength and is likely not necessary for maximum gains in strength. Indeed, programming that combines heavy and light loads may improve strength and underpin other strength-power characteristics. Multiple sets appear to produce superior training benefits compared to single sets; however, an athlete's training status and the dose-response relationship must be considered. While 2- to 5-min interset rest intervals may produce the greatest strength-power benefits, rest interval length may vary based an athlete's training age, fiber type, and genetics. Weaker athletes should focus on developing strength before emphasizing power-type training. Stronger athletes may begin to emphasize power-type training while maintaining/improving their strength. Future research should investigate how best to implement accentuated eccentric loading and variable resistance training and examine how initial strength affects an athlete's ability to improve their performance following various training methods.

Stimuli and sensors that initiate skeletal muscle hypertrophy following resistance exercise

One of the most striking adaptations to exercise is the skeletal muscle hypertrophy that occurs in response to resistance exercise. A large body of work shows that a mammalian target of rapamycin complex 1 (mTORC1)-mediated increase of muscle protein synthesis is the key, but not sole, mechanism by which resistance exercise causes muscle hypertrophy. While much of the hypertrophy signaling cascade has been identified, the initiating, resistance exercise-induced and hypertrophy-stimulating stimuli have remained elusive. For the purpose of this review, we define an initiating, resistance exercise-induced and hypertrophy-stimulating signal as "hypertrophy stimulus," and the sensor of such a signal as "hypertrophy sensor." In this review we discuss our current knowledge of specific mechanical stimuli, damage/injury-associated and metabolic stress-associated triggers, as potential hypertrophy stimuli. Mechanical signals are the prime hypertrophy stimuli candidates, and a filamin-C-BAG3-dependent regulation of mTORC1, Hippo, and autophagy signaling is a plausible albeit still incompletely characterized hypertrophy sensor. Other candidate mechanosensing mechanisms are nuclear deformation-initiated signaling or several mechanisms related to costameres, which are the functional equivalents of focal adhesions in other cells. While exercise-induced muscle damage is probably not essential for hypertrophy, it is still unclear whether and how such muscle damage could augment a hypertrophic response. Interventions that combine blood flow restriction and especially low load resistance exercise suggest that resistance exercise-regulated metabolites could be hypertrophy stimuli, but this is based on indirect evidence and metabolite candidates are poorly characterized.

The multiple roles of titin in muscle contraction and force production

Titin is a filamentous protein spanning the half-sarcomere, with spring-like properties in the I-band region. Various structural, signaling, and mechanical functions have been associated with titin, but not all of these are fully elucidated and accepted in the scientific community. Here, I discuss the primary mechanical functions of titin, including its accepted role in passive force production, stabilization of half-sarcomeres and sarcomeres, and its controversial contribution to residual force enhancement, passive force enhancement, energetics, and work production in shortening muscle. Finally, I provide evidence that titin is a molecular spring whose stiffness changes with muscle activation and actin-myosin-based force production, suggesting a novel model of force production that, aside from actin and myosin, includes titin as a "third contractile" filament. Using this three-filament model of sarcomeres, the stability of (half-) sarcomeres, passive force enhancement, residual force enhancement, and the decrease in metabolic energy during and following eccentric contractions can be explained readily.

Activation reduction following an eccentric contraction impairs torque steadiness in the isometric steady-state

BACKGROUND

The isometric steady-state following active lengthening is associated with greater torque production and lower activation, as measured by electromyographic activity (EMG), in comparison with a purely isometric contraction (ISO) at the same joint angle. This phenomenon is termed residual force enhancement (RFE). While there has been a great deal of research investigating the basic mechanisms of RFE, little work has been performed to understand the everyday relevance of RFE. The purpose of this study was to investigate whether neuromuscular control strategies differ between ISO and RFE by measuring torque steadiness of the human ankle plantar flexors.

METHODS

Following ISO maximal voluntary contractions in 12 males (25 ± 4 years), an active lengthening contraction was performed at 15°/s over a 30° ankle excursion, ending at the same joint angle as ISO (5° dorsiflexion; RFE). Surface EMG of the tibialis anterior and soleus muscles was recorded during all tasks. Torque steadiness was determined as the standard deviation (SD) and coefficient of variation (CV) of the torque trace in the ISO and RFE condition during activation-matching (20% and 60% integrated EMG) and torque-matching (20% and 60% maximal voluntary contraction) experiments. Two-tailed, paired t tests were used, within subjects, to determine the presence of RFE/activation reduction (AR) and whether there was a difference in torque steadiness between ISO and RFE conditions.

RESULTS

During the maximal and submaximal conditions, there was 5%-9% RFE with a 9%-11% AR (p < 0.05), respectively, with no difference in antagonist coactivation between RFE and ISO (p > 0.05). There were no differences in SD and CV of the torque trace for the 20% and 60% activation-matching or the 60% and maximal torque-matching trials in either the RFE or ISO condition (p > 0.05). During the 20% torque-matching trial, there were ∼37% higher values for SD and CV in the RFE as compared with the ISO condition (p < 0.05). A significant moderate-to-strong negative relationship was identified between the reduction in torque steadiness following active lengthening and the accompanying AR (p < 0.05).

CONCLUSION

It appears that while the RFE-associated AR provides some improved neuromuscular economy, this comes at the cost of increased torque fluctuations in the isometric steady-state following active lengthening during submaximal contractions.

Titin-mediated thick filament activation stabilizes myofibrils on the descending limb of their force-length relationship

PURPOSE

The aim of this study was to extend current half-sarcomere models by involving a recently found force-mediated activation of the thick filament and analyze the effect of this mechanosensing regulation on the length stability of half-sarcomeres arranged in series.

METHODS

We included a super-relaxed state of myosin motors and its force-dependent activation in a conventional cross-bridge model. We simulated active stretches of a sarcomere consisting of 2 non-uniform half-sarcomeres on the descending limb of the force-length relationship.

RESULTS

The mechanosensing model predicts that, in a passive sarcomere on the descending limb of the force-length relationship, the longer half-sarcomere has a higher fraction of myosin motors in the on-state than the shorter half-sarcomere. The difference in the number of myosin motors in the on-state ensures that upon calcium-mediated thin filament activation, the force-dependent thick filament activation keeps differences in active force within 20% during an active stretch. In the classical cross-bridge model, the corresponding difference exceeds 80%, leading to great length instabilities.

CONCLUSION

Our simulations suggest that, in contrast to the classical cross-bridge model, the mechanosensing regulation is able to stabilize a system of non-uniform half-sarcomeres arranged in series on the descending limb of the force-length relationship.

Why are muscles strong, and why do they require little energy in eccentric action?

It is well acknowledged that muscles that are elongated while activated (i.e., eccentric muscle action) are stronger and require less energy (per unit of force) than muscles that are shortening (i.e., concentric contraction) or that remain at a constant length (i.e., isometric contraction). Although the cross-bridge theory of muscle contraction provides a good explanation for the increase in force in active muscle lengthening, it does not explain the residual increase in force following active lengthening (residual force enhancement), or except with additional assumptions, the reduced metabolic requirement of muscle during and following active stretch. Aside from the cross-bridge theory, 2 other primary explanations for the mechanical properties of actively stretched muscles have emerged: (1) the so-called sarcomere length nonuniformity theory and (2) the engagement of a passive structural element theory. In this article, these theories are discussed, and it is shown that the last of these-the engagement of a passive structural element in eccentric muscle action-offers a simple and complete explanation for many hitherto unexplained observations in actively lengthening muscle. Although by no means fully proven, the theory has great appeal for its simplicity and beauty, and even if over time it is shown to be wrong, it nevertheless forms a useful framework for direct hypothesis testing.

Lower Leg Morphology and Stretch-Shortening Cycle Performance of Dancers

Greater levels of bone ultimate fracture load, bone stress–strain index, muscle cross-sectional area, and maximal voluntary isometric plantarflexion (MVIP) strength of the lower leg may be adaptations from chronic exposure to stretch-shortening cycle (SSC) actions. Dancers, a population that habitually performs SSC movements primarily about the ankle joint, may serve as a novel population to gain broader understanding of SSC function. A total of 10 female collegiate dancers and 10 untrained controls underwent peripheral quantitative computed tomography scans of both lower legs and performed MVIPs, countermovement hops, and drop hops at 20, 30, and 40 cm on a custom-made inclined sled. Dancers had greater right and left ultimate fracture load values and significantly (P ≤ .05) greater left leg stress–strain index than controls. Dancers had significantly larger right and left muscle cross-sectional area and MVIP values and hopped significantly higher during all hopping conditions in comparison with controls. Average force–time and power–time curves revealed significantly greater relative force and power measurements during the concentric phase for all hopping conditions in dancers when compared with controls. This investigation provides evidence that dance may be a stimulus for positive muscle and bone adaptations, strength levels, and enhanced SSC capabilities.

Does partial titin degradation affect sarcomere length nonuniformities and force in active and passive myofibrils?

The aim of this study was to determine the role of titin in preventing the development of sarcomere length nonuniformities following activation and after active and passive stretch by determining the effect of partial titin degradation on sarcomere length nonuniformities and force in passive and active myofibrils. Selective partial titin degradation was performed using a low dose of trypsin. Myofibrils were set at a sarcomere length of 2.4 µm and then passively stretched to sarcomere lengths of 3.4 and 4.4 µm. In the active condition, myofibrils were set at a sarcomere length of 2.8 µm, activated, and actively stretched by 1 µm/sarcomere. The extent of sarcomere length nonuniformities was calculated for each sarcomere as the absolute difference between sarcomere length and the mean sarcomere length of the myofibril. Our main finding is that partial titin degradation does not increase sarcomere length nonuniformities after passive stretch and activation compared with when titin is intact but increases the extent of sarcomere length nonuniformities after active stretch. Furthermore, when titin was partially degraded, active and passive stresses were substantially reduced. These results suggest that titin plays a crucial role in actively stretched myofibrils and is likely involved in active and passive force production.

Dynamic Musculoskeletal Functional Morphology: Integrating diceCT and XROMM

The tradeoff between force and velocity in skeletal muscle is a fundamental constraint on vertebrate musculoskeletal design (form:function relationships). Understanding how and why different lineages address this biomechanical problem is an important goal of vertebrate musculoskeletal functional morphology. Our ability to answer questions about the different solutions to this tradeoff has been significantly improved by recent advances in techniques for quantifying musculoskeletal morphology and movement. Herein, we have three objectives: (1) review the morphological and physiological parameters that affect muscle function and how these parameters interact; (2) discuss the necessity of integrating morphological and physiological lines of evidence to understand muscle function and the new, high resolution imaging technologies that do so; and (3) present a method that integrates high spatiotemporal resolution motion capture (XROMM, including its corollary fluoromicrometry), high resolution soft tissue imaging (diceCT), and electromyography to study musculoskeletal dynamics in vivo. The method is demonstrated using a case study of in vivo primate hyolingual biomechanics during chewing and swallowing. A sensitivity analysis demonstrates that small deviations in reconstructed hyoid muscle attachment site location introduce an average error of 13.2% to in vivo muscle kinematics. The observed hyoid and muscle kinematics suggest that hyoid elevation is produced by multiple muscles and that fascicle rotation and tendon strain decouple fascicle strain from hyoid movement and whole muscle length. Lastly, we highlight current limitations of these techniques, some of which will likely soon be overcome through methodological improvements, and some of which are inherent. Anat Rec, 301:378-406, 2018. © 2018 Wiley Periodicals, Inc.

Cross-bridge mechanism of residual force enhancement after stretching in a skeletal muscle

A muscle model that uses a modified Langevin equation with actomyosin potentials was used to describe the residual force enhancement after active stretching. Considering that the new model uses cross-bridge theory to describe the residual force enhancement, it is different from other models that use passive stretching elements. Residual force enhancement was simulated using a half sarcomere comprising 100 myosin molecules. In this paper, impulse is defined as the integral of an excess force from the steady isometric force over the time interval for which a stretch is applied. The impulse was calculated from the force response due to fast and slow muscle stretches to demonstrate the viscoelastic property of the cross-bridges. A cross-bridge mechanism was proposed as a way to describe the residual force enhancement on the basis of the impulse results with reference to the compliance of the actin filament. It was assumed that the period of the actin potential increased by 0.5% and the amplitude of the potential decreased by 0.5% when the half sarcomere was stretched by 10%. The residual force enhancement after 21.0% sarcomere stretching was 6.9% of the maximum isometric force of the muscle; this value was due to the increase in the number of cross-bridges.