Green Synthesis and Characterization of Zinc Oxide Nanoparticles Using Eucalyptus globules and Their Fungicidal Ability Against Pathogenic Fungi of Apple Orchards

In vitro assessment of the effect of magnetic fields on efficacy of biosynthesized selenium nanoparticles by Alborzia kermanshahica

Cyanobacteria represent a rich resource of a wide array of unique bioactive compounds that are proving to be potent sources of anticancer drugs. Selenium nanoparticles (SeNPs) have shown an increasing potential as major therapeutic platforms and led to the production of higher levels of ROS that can present desirable anticancer properties. Chitosan-SeNPs have also presented antitumor properties against hepatic cancer cell lines, especially the Cht-NP (Chitosan-NPs), promoting ROS generation and mitochondria dysfunction. It is proposed that magnetic fields can add new dimensions to nanoparticle applications. Hence, in this study, the biosynthesis of SeNPs using Alborzia kermanshahica and chitosan (CS) as stabilizers has been developed. The SeNPs synthesis was performed at different cyanobacterial cultivation conditions, including control (without magnetic field) and magnetic fields of 30 mT and 60 mT. The SeNPs were characterized by uv-visible spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), Dynamic light scattering (DLS), zeta potential, and TEM. In addition, the antibacterial activity, inhibition of bacterial growth, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC), as well as the antifungal activity and cytotoxicity of SeNPs, were performed. The results of uv-visible spectrometry, DLS, and zeta potential showed that 60 mT had the highest value regarding the adsorption, size, and stabilization in compared to the control. FTIR spectroscopy results showed consistent spectra, but the increased intensity of peaks indicates an increase in bond number after exposure to 30 mT and 60 mT. The results of the antibacterial activity and the inhibition zone diameter of synthesized nanoparticles showed that Staphylococcus aureus was more sensitive to nanoparticles produced under 60 mT. Se-NPs produced by Alborzia kermanshahica cultured under a 60 mT magnetic field exhibit potent antimicrobial and anticancer properties, making them a promising natural agent for use in the pharmaceutical and biomedical industries.

Evaluation of the effects of zinc oxide (ZnO NPs) nanoparticles synthesized by green synthesis on Caenorhabditis elegans

In recent years, the rapid development of nanotechnology has caused the products obtained with this technology to be used more daily. Information on the effects of these products, which provide great advantages in every respect, on human health and the environment is insufficient. It has been suggested that these nanoparticles may have toxic effects on living things, mostly in animal experiments and cell cultures. In this paper, the organism Caenorhabditis elegans (C. elegans), which contains a genome and biochemical ways highly similar to humans, is used to understand and reveal the metabolism of Zinc oxide nanoparticles (ZnO NPs) toxicological effects. The toxicological effects of ZnO NPs on C. elegans organisms were investigated and the results were evaluated in terms of environment and human health. C. elegans was exposed to commercial ZnO NPs and green synthesized ZnO NPs from Olea europaea (olive tree, OLE). LC50 values were determined by probit analysis (green synthesized ZnO NP LC5024h = 84.97 mg/L, LC5072h = 33.27 mg/L, commercial ZnO NPs LC5024h = 5.75 mg/L, LC5072h = 1.91 mg/L). When the survival times of C. elegans were evaluated by the Kaplan-Meier method, it was seen that commercial ZnO NPs were more toxic than green synthesized ZnO NPs. In MTT tests, it was clearly seen that commercial ZnO NPs and green synthesized ZnO NPs entered the cell and caused different cytotoxicity. While there was a difference between control and 0.5, 2.5, 5, 10, 25, and 50 mg/L doses in commercial ZnO NP applications, there were significant differences between control and 25, 50 mg/L concentrations in green synthesized ZnO NP applications.

Green synthesis of nanomaterials by using plant extracts as reducing and capping agents

An alternative method to conventional synthesis is examined in this review by the use of plant extracts as reducing and capping agents. The use of plant extracts represents an economically viable and environmentally friendly alternative to conventional synthesis. In contrast to previous reviews, this review focuses on the synthesis of nano-compounds utilizing plant extracts, which lack comprehensive reports. In order to synthesize diverse nanostructures, researchers have discovered a sustainable and cost-effective method of harnessing functional groups in plant extracts. Each plant extract is discussed in detail, along with its potential applications, demonstrating the remarkable morphological diversity achieved by using these green synthesis approaches. A reduction and capping agent made from plant extracts is aligned with the principles of green chemistry and offers economic advantages as well as paving the way for industrial applications. In this review, it is discussed the significance of using plant extracts to synthesize nano-compounds, emphasizing their potential to shape the future of nanomaterials in a sustainable and ecologically friendly manner.

Biosynthesis of silver nanoparticles by banana pulp extract: Characterizations, antibacterial activity, and bioelectricity generation

Here, green banana pulp extract (PE) has been used as a bio-reducing agent for the reduction of silver ions to silver nanoparticles (AgNPs). Bio-synthesized AgNPs were characterized by using UV, XRD, FEEM, TEM, and FTIR analysis. The face-centered cubic structures of AgNPs were formed with an average crystallite size of 31.26 nm and an average particle size of 42.97 nm. In this report, the electrical activities of green synthesized AgNPs have been evaluated along with the antibacterial activities. The antibacterial activities of AgNPs were evaluated against two pathogenic bacteria: Escherichia coli (gram-negative) and Staphylococcus epidermidis (gram-positive). AgNPs were added to the electrochemical cell and results demonstrated the improvement of power of the electrochemical cell. Green synthesized AgNPs showed excellent antibacterial activities against both gram-positive and negative bacteria and most importantly the NPs played an important role as an effective catalyst to enhance the electrical performance of bio-electrochemical cells. These significant findings may help in the advancement of nanotechnology in biomedical applications as well as in the creation of cheap and eco-friendly power generation devices.

Biosynthesis of ZnO and TiO2 nanoparticles using Ipomoea carnea leaf extract and its effect on black carrot (Daucus carota L.) cv. Pusa Asita

Nano fertilizers (NFs) are now becoming an important tool for plant nutrient management having capabilities to improve soil fertility, crop productivity and quality of agricultural products. Since, they are needed in very small amount, thus, reduces cost of crop production. Among different essential or beneficial plant nutrients, Zn and Ti are important micro nutrients having number of beneficial effect on crop growth, yield, quality and post harvest life. Present experiment was carried out to prepare ZnO and TiO2 nanoparticles (NPs) through green technology by using aqueous extract of Ipomoea carnea (morning glory) leaves. In order to investigate size, morphology, composition, and stability of selected NPs, the detailed characterization was carried out using UV-visible spectroscopy, FTIR, HRTEM, EDX, BET, X-ray diffraction, XPS and particle size distribution studies. Subsequently, the effect of foliar spray of ZnO and TiO2 NPs was evaluated in respect of vegetative growth, yield and quality of black carrot (Daucus carota L.) cv. Pusa Asita in presence of 50% Recommended dose of fertilizer (RDF) to assess their effect on fertilizer use efficiency also. There were 8 treatments viz. Control (no fertilizer), recommended dose of fertilizer (RDF), TiO2 (5, 10 and 15 ppm along with 50% RDF), ZnO (50, 75 and 100 ppm along with 50% RDF)] with 3 replications following Randomised Block Design having 24 plots (1 m × 1 m). The observations were taken for vegetative growth, edible root yield and root quality parameters. Although, the growth, yield and quality parameters were found superior (root yield 43.84 g/plant) under conventional system of recommended dose of fertilizers (RDF) of NPK, however, TiO2 NPs also showed very promising result close to RDF as compared to ZnO NPs. Among them, 5 ppm TiO2 foliar application along with 50% NPK was found to be the best in terms of vegetative growth, root yield (38.73 g/plant) and quality of black carrot. It was also found that higher concentration of TiO2 and ZnO NPs had adverse effect on the plant performance. Therefore, it can be concluded that 5 ppm TiO2 NPs along with 50% RDF was good for black carrot production.

Revisiting the Green Synthesis of Nanoparticles: Uncovering Influences of Plant Extracts as Reducing Agents for Enhanced Synthesis Efficiency and Its Biomedical Applications

Background

Conventional nanoparticle synthesis methods involve harsh conditions, high costs, and environmental pollution. In this context, researchers are actively searching for sustainable, eco-friendly alternatives to conventional chemical synthesis methods. This has led to the development of green synthesis procedures among which the exploration of the plant-mediated synthesis of nanoparticles experienced a great development. Especially, because plant extracts can work as reducing and stabilizing agents. This opens up new possibilities for cost-effective, environmentally-friendly nanoparticle synthesis with enhanced size uniformity and stability. Moreover, bio-inspired nanoparticles derived from plants exhibit intriguing pharmacological properties, making them highly promising for use in medical applications due to their biocompatibility and nano-dimension.

Objective

This study investigates the role of specific phytochemicals, such as phenolic compounds, terpenoids, and proteins, in plant-mediated nanoparticle synthesis together with their influence on particle size, stability, and properties. Additionally, we highlight the potential applications of these bio-derived nanoparticles, particularly with regard to drug delivery, disease management, agriculture, bioremediation, and application in other industries.

Methodology

Extensive research on scientific databases identified green synthesis methods, specifically plant-mediated synthesis, with a focus on understanding the contributions of phytochemicals like phenolic compounds, terpenoids, and proteins. The database search covered the field's development over the past 15 years.

Results

Insights gained from this exploration highlight plant-mediated green synthesis for cost-effective nanoparticle production with significant pharmacological properties. Utilizing renewable biological resources and controlling nanoparticle characteristics through biomolecule interactions offer promising avenues for future research and applications.

Conclusion

This review delves into the scientific intricacies of plant-mediated synthesis of nanoparticles, highlighting the advantages of this approach over the traditional chemical synthesis methods. The study showcases the immense potential of green synthesis for medical and other applications, aiming to inspire further research in this exciting area and promote a more sustainable future.

Eucalyptus globulus Mediated Green Synthesis of Environmentally Benign Metal Based Nanostructures: A Review

The progress in nanotechnology has effectively tackled and overcome numerous global issues, including climate change, environmental contamination, and various lethal diseases. The nanostructures being a vital part of nanotechnology have been synthesized employing different physicochemical methods. However, these methods are expensive, polluting, eco-unfriendly, and produce toxic byproducts. Green chemistry having exceptional attributes, such as cost-effectiveness, non-toxicity, higher stability, environment friendliness, ability to control size and shape, and superior performance, has emerged as a promising alternative to address the drawbacks of conventional approaches. Plant extracts are recognized as the best option for the biosynthesis of nanoparticles due to adherence to the environmentally benign route and sustainability agenda 2030 of the United Nations. In recent decades, phytosynthesized nanoparticles have gained much attention for different scientific applications. Eucalyptus globulus (blue gum) is an evergreen plant belonging to the family Myrtaceae, which is the targeted point of this review article. Herein, we mainly focus on the fabrication of nanoparticles, such as zinc oxide, copper oxide, iron oxide, lanthanum oxide, titanium dioxide, magnesium oxide, lead oxide, nickel oxide, gold, silver, and zirconium oxide, by utilizing Eucalyptus globulus extract and its essential oils. This review article aims to provide an overview of the synthesis, characterization results, and biomedical applications of nanoparticles synthesized using Eucalyptus globulus. The present study will be a better contribution to the readers and the students of environmental research.

Engineered Metal Oxide Nanoparticles as Fungicides for Plant Disease Control

Metal oxide nanoparticles are considered to be good alternatives as fungicides for plant disease control. To date, numerous metal oxide nanoparticles have been produced and evaluated as promising antifungal agents. Consequently, a detailed and critical review on the use of mono-, bi-, and tri-metal oxide nanoparticles for controlling phytopathogenic fungi is presented. Among the studied metal oxide nanoparticles, mono-metal oxide nanoparticles-particularly ZnO nanoparticles, followed by CuO nanoparticles -are the most investigated for controlling phytopathogenic fungi. Limited studies have investigated the use of bi- and tri-metal oxide nanoparticles for controlling phytopathogenic fungi. Therefore, more studies on these nanoparticles are required. Most of the evaluations have been carried out under in vitro conditions. Thus, it is necessary to develop more detailed studies under in vivo conditions. Interestingly, biological synthesis of nanoparticles has been established as a good alternative to produce metal oxide nanoparticles for controlling phytopathogenic fungi. Although there have been great advances in the use of metal oxide nanoparticles as novel antifungal agents for sustainable agriculture, there are still areas that require further improvement.

Silver nanoparticles green synthesized with leaf extract of disease-resistant amaranthus genotypes effectively suppress leaf blight (Rhizoctonia solani Kühn) disease in a susceptible red amaranthus cultivar

Silver nanoparticles (AgNPs) were green synthesized using leaf extract of the leaf blight disease (Rhizoctonia solani) susceptible red amaranthus (Amaranthus tricolor L.) and the disease-resistant green (A. dubius) and the wild amaranthus (A. viridis) genotypes, physically characterized, and assessed for their anti-fungal effects against R. solani. The green synthesized nanostructures showed an absorption maximum typical of silver nanoparticles in spectroscopy, and face-centered cubic structures in X-ray diffraction. Field Emission Scanning Electron Microscopic analysis and High-Resolution Transmission Electron Microscopy revealed the size range to be 35-45 nm for all the samples. In vitro mycelial growth inhibition of the pathogen occurred with 500 and 750 ppm concentrations of the nanoparticles in a poisoned-food assay. Further, detached leaves of red amaranthus variety were sprayed with the nanoparticles, and then challenged with the pathogen. There was significant difference in lesion development on leaves sprayed with Ad-AgNPs and Av-AgNPs compared to those treated with At-AgNPs. In the in vivo assay, challenging with the pathogen after spraying the foliage of the leaf blight susceptible red amaranthus variety with Ad-AgNPs at 750 ppm concentration recorded the lowest disease index (7.40) followed by that received Av-AgNPs spray at the same concentration (17.69), five days after inoculation. At-AgNPs treated plants had a disease index of 49.38. Our findings suggest that application of AgNPs green synthesized with leaf extract of disease-resistant genotypes of amaranthus effectively suppressed leaf blight disease incidence in a susceptible amaranthus genotype. To our knowledge, this is the first report on the improved plant pathogen-suppressive activity of any metal nanoparticle when biogenically synthesized using extracts from a disease-resistant plant genotype.

Green synthesis and antimicrobial mechanism of nanoparticles: applications in agricultural and agrifood safety

The growing demand for food and its safety are a challenge for agriculture and agrifood. This has led to the incorporation of alternatives such as organic agriculture, the use of biocontrollers, the development of transgenic plants resistant to pathogens and the incorporation of nanotechnology. In this sense, agrochemicals based on nanoparticles (NPs) have been developed. Recently, the green synthesis of NPs has grown rapidly and, for this reason, molecules, microorganisms, fungi and plants are used. Synthesis from plant extracts offers a broad spectrum and, despite the fact that NPs are usually dispersed in size and shape, extensive antimicrobial effectiveness has been demonstrated at nanomolar concentrations. It has been shown that the mechanism of action can be through the dissipation of the driving force of the protons, the alteration of cellular permeability, the formation of bonds with the thiol group of the proteins, the generation of reactive species of oxygen, and the hyperoxidation of DNA, RNA and even the cell membrane. To improve the efficiency of NPs, modifications have been made such as coating with other metals, the addition of antibiotics, detergents and surfactants, as well as the acidification of the solution. Consequently, NPs are considered as a promising method for achieving safety in the agricultural and agrifood area. However, it is necessary to investigate the side effects of NPs, when applied in agroecological systems, on the textural, nutriment and sensory properties of food, as well as the impact on human health. © 2022 Society of Chemical Industry.

Antioxidant Activity as an Indicator of the Efficiency of Plant Extract-Mediated Synthesis of Zinc Oxide Nanoparticles

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using a diverse range of plant species has been extensively reported. Despite the success achieved by biogenic synthesis, there are problems with the control and prediction of the properties of ZnO NPs, due to phytochemical diversity between plant species. In this sense, the main objective of our work was to investigate the effect of the antioxidant activity (AA) of plant extracts on the physicochemical characteristics of ZnO NPs (production yield, chemical composition, polydispersity index (PDI), surface charge (ζ-potential) and average particle size). In order to accomplish this objective, four plant extract with different antioxidant activities were used: Galega officinalis, Buddleja globosa, Eucalyptus globulus, and Aristotelia chilensis. Phytochemical screening, quantitative analysis of phenolic compounds and antioxidant activity determination of the different extracts were carried out. Chemical species such as catechin, malvidin, quercetin, caffeic acid, and ellagic acid were the dominant components, found in the extracts studied. The A. chilensis extract showed the highest value of total phenolic compounds (TPC) and AA, followed by E. globulus, B. globosa and G. officinalis. Zetasizer, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) data show that plant extracts with lower AA leads to a decrease in the yield of ZnO NPs and an increase in the amount of residual organic extract that remains on the particles. The latter caused an increase in the average particle size, PDI and ζ-potential as a consequence of agglomeration and particle coarsening. Our result suggest that it is possible to use the AA as an indicator of the potential reducing capacity of plant extracts. In this way it is possible to guarantee the reproducibility of the synthesis process as well as ensure the formation of ZnO NPs with desired characteristics.

Blending Approach Preparation of PVA-g-PMA Films with Embedded "Green" Synthesized Silver Nanoparticles for Acetone Optical Detection

The blending approach (also known as the ex-situ approach) was used for the deposition of thin composite films comprising poly(vinyl alcohol-graft-methyl acrylate) (PVA-g-PMA) and silver nanoparticles (AgNPs). Firstly, the copolymer aqueous dispersion was synthesized through the redox polymerization of methyl acrylate (MA) on poly(vinyl alcohol) (PVA) using ammonium cerium (IV) nitrate as the initiator. Then, AgNPs were synthesized through a "green" method using the water extract of lavender based on by-products of the essential oil industry, and then they were blended with the polymer. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) were used to determine nanoparticle size, along with their stability over time in suspension, during the 30-day period. Thin films of the PVA-g-PMA copolymer, with different AgNP volume fractions varying between 0.008 and 0.260%, were deposited via the spin-coating method on Si substrates, and their optical properties were explored. UV-VIS-NIR spectroscopy and non-linear curve fitting were used for the determination of the refractive index, extinction coefficient, and thickness of the films, while photoluminescence measurements at room temperature were conducted for studying the emission of the films. The concentration dependence of film thickness was observed and showed that thickness increased linearly from 31 nm to 75 nm when the nanoparticles' weight content increased from 0.3 wt% to 2.3 wt%. The sensing properties toward acetone vapors were tested in a controlled atmosphere by measuring reflectance spectra before and during exposure to the analyte molecules in the same film spot; the swelling degree of films was calculated and compared to the corresponding undoped samples. It was shown that the concentration of AgNPs of 1.2 wt% in the films is optimal for the enhancement of the sensing response toward acetone. The influence of AgNPs on the films' properties was revealed and discussed.

Green synthesis of nanoparticles using botanicals and their application in management of fungal phytopathogens: a review

Green synthesis of nanoparticles is an emerging aspect in plant disease management that blends nanotechnology and plant-derived ingredients to produce a biocontrol formulation. Different physical and chemical processes employed in the synthesis of nanoparticles are polluting, expensive, and also release hazardous by- products. The range of secondary metabolites present in plants makes them efficient reducing and stabilizing agent during the synthesis process. These metabolites serve a vital role in plant defense against the invasion of phytopathogens including fungi, bacteria, viruses, insect pests, etc. The plant metabolites, such as sugars, terpenoids, polyphenols, alkaloids, phenolic acids, and proteins, have been shown to be crucial in the reduction of metal ions into nanoparticles. In green synthesis of nanoparticles, the plant extracts are used as potential reducing and capping. This also restricts the formation of clusters or aggregates and improves the colloidal stability. The nanoparticles exhibit excellent antimycotic against a variety of phytopathogens and are very efficient in managing plant diseases. The aim of this review is to highlight plants, phytochemicals exhibiting antifungal properties, green synthesis of nanoparticles using plant material and their antimycotic activity.

Green synthesis and characterization of zirconium nanoparticlefor dental implant applications

Green synthesis is a promising and cost-effective technique to synthesize nanoparticles from plant extract. The present study shows the green synthesis of zirconium nanoparticles using the extract of ginger, garlic, and zirconium nitride. The obtained nanoparticles were studied for potential dental implant applications. The synthesized nanoparticles were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-Ray Spectroscopy (EDX), X-Ray diffraction analysis (XRD), and antibacterial analysis. FTIR analysis confirmed the presence of various organic compounds in the synthesized nanoparticles. The synthesized nanoparticles were spherical, triangular, and irregular, with varying sizes confirmed by FESEM analysis. The nanoparticles synthesized from the combination of garlic and ginger, and zirconium exhibited potent antibacterial activity against S. aureus. Anti-biofilm, anti-microbial activity, biointegration formation, and cell mechanism survival are also mentioned. Thus, the synthesized nanoparticles can be a good candidate for a dental implant because of their excellent antimicrobial properties.

Bacillus sp. extract used to fabricate ZnO nanoparticles for their antagonist effect against phytopathogens

In order to achieve the food demand of a growing population, agricultural productivity needs to be increased by employing safe strategies. In the present study we have evaluated ZnONPs that were synthesized from the culture supernatant of Bacillus subtilis. Bio mimetically synthesized ZnONPs showed a surface resonance peak of 355 nm corresponding to NPs formation. Further, NPs were examined for their size, shape and element confirmation by DLS, AFM, SEM, TEM and EDAX, which confirmed the synthesized NPs were nearly spherical in size with average diameter of 32 nm by TEM. Surface charge of + 34.3 mV was observed for NPs with a low poly-dispersity index of 0.21. In vitro efficacy studies against fungi Colletotrichum capsici, Sclerotium rolfsii, Alternaria solani and Fusarium oxysporum f. sp. cicero showed up to 99% mycelial growth inhibition at 0.125% ZnONPs. Further, in-vitro disk-diffusion assay showed inhibition zones of 23 ± 0.4 mm and 12.67 ± 0.24 mm for Xanthomonas axonopodis pv. punicae (Xap) and Xanthomonas oryzae pv. oryzae (Xoo) bacterial cultures. Plant toxicity study was observed that ≤ 0.14% NPs concentration was safe under greenhouse conditions. Overall, the present study emphasizes the potential effect of ZnONPs against agricultural pathogens which play an important role in agriculture production.

New perception about the use of nanofungicides in sustainable agriculture practices

Protecting plants from pathogens using synthetic nanofungicides is not very effective, because it is harmful to the environment. However, it is synthetic fungicides that farmers are familiar with and commonly use. In this modern era, nanotechnology offers a smart solution to environmental issues at the nanoscale level. It is an emergent field and nanoparticles can be synthesized through various methods. Nanofungicides are efficient due to their solubility and permeability, low dose-dependent toxicity, low dose, enhanced bioavailability, targeted delivery, enhanced bioavailability, and controlled release. There are many metallic compounds, such as Cu, Zn, Ag, and TiO₂ available which are used as nanofungicides. There is a contrary relationship between the size of the nanoparticles and their efficacy and antifungal potential. This review article offers a wide knowledge about formulation of nanomaterials as nanofungicides and their role in disease management in plants.

Nanotechnological Interventions in Agriculture

Agriculture is an important sector that plays an important role in providing food to both humans and animals. In addition, this sector plays an important role in the world economy. Changes in climatic conditions and biotic and abiotic stresses cause significant damage to agricultural production around the world. Therefore, the development of sustainable agricultural techniques is becoming increasingly important keeping in view the growing population and its demands. Nanotechnology provides important tools to different industrial sectors, and nowadays, the use of nanotechnology is focused on achieving a sustainable agricultural system. Great attention has been given to the development and optimization of nanomaterials and their application in the agriculture sector to improve plant growth and development, plant health and protection and overall performance in terms of morphological and physiological activities. The present communication provides up-to-date information on nanotechnological interventions in the agriculture sector. The present review deals with nanoparticles, their types and the role of nanotechnology in plant growth, development, pathogen detection and crop protection, its role in the delivery of genetic material, plant growth regulators and agrochemicals and its role in genetic engineering. Moreover, the role of nanotechnology in stress management is also discussed. Our aim in this review is to aid researchers to learn quickly how to use plant nanotechnology for improving agricultural production.

Green Synthesis of Silver Nanoparticles Using Aqueous Citrus limon Zest Extract: Characterization and Evaluation of Their Antioxidant and Antimicrobial Properties

The current work concentrated on the green synthesis of silver nanoparticles (AgNPs) through the use of aqueous Citruslimon zest extract, optimizing the different experimental factors required for the formation and stability of AgNPs. The preparation of nanoparticles was confirmed by the observation of the color change of the mixture of silver nitrate, after the addition of the plant extract, from yellow to a reddish-brown colloidal suspension and was established by detecting the surface plasmon resonance band at 535.5 nm, utilizing UV-Visible analysis. The optimum conditions were found to be 1 mM of silver nitrate concentration, a 1:9 ratio extract of the mixture, and a 4 h incubation period. Fourier transform infrared spectroscopy spectrum indicated that the phytochemicals compounds present in Citrus limon zest extract had a fundamental effect on the production of AgNPs as a bio-reducing agent. The morphology, size, and elemental composition of AgNPs were investigated by zeta potential (ZP), dynamic light scattering (DLS), SEM, EDX, X-ray diffraction (XRD), and transmission electron microscopy (TEM) analysis, which showed crystalline spherical silver nanoparticles. In addition, the antimicrobial and antioxidant properties of this bioactive silver nanoparticle were also investigated. The AgNPs showed excellent antibacterial activity against one Gram-negative pathogens bacteria, Escherichia coli, and one Gram-positive bacteria, Staphylococcus aureus, as well as antifungal activity against Candida albicans. The obtained results indicate that the antioxidant activity of this nanoparticle is significant. This bioactive silver nanoparticle can be used in biomedical and pharmacological fields.

Eucalyptus globulus and Salvia officinalis Extracts Mediated Green Synthesis of Silver Nanoparticles and Their Application as an Antioxidant and Antimicrobial Agent

Silver nanoparticles (AgNPs) biosynthesized using plant extracts as reducing and capping agents show multiple possibilities for solving various biological problems. The aim of this study was to expand the boundaries of AgNPs using a novel low toxicity and production cost phytochemical method for the biosynthesis of nanoparticles from Eucalyptus globulus and Salvia officinalis aqueous leaf extracts. Biosynthesized AgNPs were characterized by various methods (ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared (FTIR) spectroscopy with horizontal attenuated total reflectance (HART), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS)). The determined antioxidative and antimicrobial activity of plant extracts was compared with the activity of the AgNPs. The UV-vis spectral analysis demonstrated the absorption peaks at 408 and 438 nm, which confirmed the synthesis of stable AgNPs from E. globulus and S. officinalis, respectively. FTIR-HART results suggested strong capping of phytochemicals on AgNPs. TEM results show mainly spherical-shaped AgNPs, whose size distribution depends on the plant leaf extract type; the smaller AgNPs were obtained with E. globulus extract (with size range of 17.5 ± 5.89 nm compared to 34.3 ± 7.76 nm from S. officinalis AgNPs). The in vitro antioxidant activity evaluated by radical scavenging assays and the reduction activity method clearly demonstrated that both the plant extracts and AgNPs showed prominent antioxidant properties. In addition, AgNPs show much stronger antimicrobial activity against broad spectrum of Gram-negative and Gram-positive bacteria strains than the plant extracts used for their synthesis.

Green Nanotechnology: Plant-Mediated Nanoparticle Synthesis and Application

The key pathways for synthesizing nanoparticles are physical and chemical, usually expensive and possibly hazardous to the environment. In the recent past, the evaluation of green chemistry or biological techniques for synthesizing metal nanoparticles from plant extracts has drawn the attention of many researchers. The literature on the green production of nanoparticles using various metals (i.e., gold, silver, zinc, titanium and palladium) and plant extracts is discussed in this study. The generalized mechanism of nanoparticle synthesis involves reduction, stabilization, nucleation, aggregation and capping, followed by characterization. During biosynthesis, major difficulties often faced in maintaining the structure, size and yield of particles can be solved by monitoring the development parameters such as temperature, pH and reaction period. To establish a widely accepted approach, researchers must first explore the actual process underlying the plant-assisted synthesis of a metal nanoparticle and its action on others. The green synthesis of NPs is gaining attention owing to its facilitation of the development of alternative, sustainable, safer, less toxic and environment-friendly approaches. Thus, green nanotechnology using plant extract opens up new possibilities for the synthesis of novel nanoparticles with the desirable characteristics required for developing biosensors, biomedicine, cosmetics and nano-biotechnology, and in electrochemical, catalytic, antibacterial, electronics, sensing and other applications.

Plant-Based Green Synthesis of Nanoparticles: Production, Characterization and Applications

Nanotechnology is a fast-expanding and multidisciplinary field with many applications in science and technology [...].

Recent Approaches towards Control of Fungal Diseases in Plants: An Updated Review

Recent research demonstrates that the number of virulent phytopathogenic fungi continually grows, which leads to significant economic losses worldwide. Various procedures are currently available for the rapid detection and control of phytopathogenic fungi. Since 1940, chemical and synthetic fungicides were typically used to control phytopathogenic fungi. However, the substantial increase in development of fungal resistance to these fungicides in addition to negative effects caused by synthetic fungicides on the health of animals, human beings, and the environment results in the exploration of various new approaches and green strategies of fungal control by scientists from all over the world. In this review, the development of new approaches for controlling fungal diseases in plants is discussed. We argue that an effort should be made to bring these recent technologies to the farmer level.

Plant-Mediated Zinc Oxide Nanoparticles: Advances in the New Millennium towards Understanding Their Therapeutic Role in Biomedical Applications

Zinc oxide nanoparticles have become one of the most popular metal oxide nanoparticles and recently emerged as a promising potential candidate in the fields of optical, electrical, food packaging, and biomedical applications due to their biocompatibility, low toxicity, and low cost. They have a role in cell apoptosis, as they trigger excessive reactive oxygen species (ROS) formation and release zinc ions (Zn2+) that induce cell death. The zinc oxide nanoparticles synthesized using the plant extracts appear to be simple, safer, sustainable, and more environmentally friendly compared to the physical and chemical routes. These biosynthesized nanoparticles possess strong biological activities and are in use for various biological applications in several industries. Initially, the present review discusses the synthesis and recent advances of zinc oxide nanoparticles from plant sources (such as leaves, stems, bark, roots, rhizomes, fruits, flowers, and seeds) and their biomedical applications (such as antimicrobial, antioxidant, antidiabetic, anticancer, anti-inflammatory, photocatalytic, wound healing, and drug delivery), followed by their mechanisms of action involved in detail. This review also covers the drug delivery application of plant-mediated zinc oxide nanoparticles, focusing on the drug-loading mechanism, stimuli-responsive controlled release, and therapeutic effect. Finally, the future direction of these synthesized zinc oxide nanoparticles' research and applications are discussed.

Prospective Application of Nanoparticles Green Synthesized Using Medicinal Plant Extracts as Novel Nanomedicines

The use of medicinal plants in green synthesis of metal nanoparticles is increasing day by day. A simple search for the keywords "green synthesis" and "nanoparticles" yields more than 33,000 articles in Scopus. As of August 10, 2021, more than 4000 articles have been published in 2021 alone. Besides demonstrating the ease and environmental-friendly route of synthesizing nanomaterials, many studies report the superior pharmacological properties of green synthesized nanoparticles compared to those synthesized by other methods. This is probably due to the fact that bioactive molecules are entrapped on the surface of these nanoparticles. On the other hand, recent studies have confirmed the nano-dimension and biocompatibility of metal ash (Bhasma) preparations, which are commonly macerated with biological products and administered for the treatment of various diseases in Indian medicine since ancient times. This perspective article argues for the prospective medical application of green nanoparticles in the light of Bhasma.

A strategy for mitigating avian colibacillosis disease using plant growth promoting rhizobacteria and green synthesized zinc oxide nanoparticles

•

ZnO-NPs showed strong antagonism against E. coli causing avian colibacillosis disease.

•

The 90 mg/ml of ZnO-NPs was more effective.

•

A combination of ZnO-NPs and Pseudomonas sp. show higher antagonism.

•

Docking analysis exhibited that ZnO binds with PBP 6 protein receptor like other ligands.

Avian colibacillosis caused by the zoonotic pathogen Escherichia coli is a common bacterial infection that causes major losses in the poultry sector. Extracts of different medicinal plants and antibiotics have been used against poultry bacterial pathogens. However, overuse of antibiotics and extracts against pathogenic strains leads to the proliferation of multi-drug resistant bacteria. Due to their environmentally friendly nature, nanotechnology and beneficial bacterial strains can be used as effective strategies against poultry infections. Green synthesis of zinc oxide nanoparticles (ZnO-NPs) from Eucalyptus globulus leaves was carried out in this study. Their characterization was done by UV–vis spectroscopy, X-ray diffraction (XRD), and Fourier transmission infrared spectroscopy (FT-IR) which confirmed their synthesis, structure, and size. In vitro, antimicrobial activities of plant leaf extract, ZnO-NPs, and plant growth-promoting rhizobacteria (PGPR) were checked against E. coli using well diffusion as well as disc diffusion method. Results proved that the antimicrobial activity of ZnO-NPs and PGPR strains was more enhanced when compared to eucalyptus leaf extract at 36 h. The maximum relative inhibition shown by ZnO-NPs, PGPR strains and eucalyptus leaf extracts was 88%, 67% and 58%, respectively. The effectiveness of ZnO-NPs was also increased with an increase in particle dose and treatment time. The 90 mg/ml of ZnO-NPs was more effective. PGPR strains from all over the tested strains, Pseudomonas sp. (HY8N) exhibited a strong antagonism against the E. coli strain as compared to other PGPR strains used in this study. However, combined application of PGPR (Pseudomonas sp. (HY8N)) and ZnO-NPs augment antagonistic effects and showed maximum 69% antagonism. The study intends to investigate the binding affinity of ZnO-NPs with the suitable receptor of the bacterial pathogen by in silico methods. The binding site conformations showed that the ligand ZnO binds with conserved binding site of penicillin-binding protein 6 (PBP 6) receptor. According to the interactions, ZnO-NPs form the same interaction pattern with respect to other reported ligands, hence it can play a significant role in the inhibition of PBP 6. This research also found that combining ZnO-NPs with Pseudomonas sp. (HY8N) was a novel and effective technique for treating pathogenic bacteria, including multidrug-resistant bacteria.

Remediation of emerging environmental pollutants: A review based on advances in the uses of eco-friendly biofabricated nanomaterials

The increased environmental pollutants due to anthropogenic activities are posing an adverse effects and threat on various biotic forms on the planet. Heavy metals and certain organic pollutants by their toxic persistence in the environment are regarded as significant pollutants worldwide. In recent years, pollutants exist in various forms in the environment are difficult to eliminate by traditional technologies due to various drawbacks. This has lead to shifting of research for the development of cost-effective and efficient technologies for the remediation of environmental pollutants. The adaption of adsorption phenomenon from the traditional technologies with the modification of adsorbents at nanoscale is the trended research for mitigating the environmental pollutants with petite environmental concerns. Over the past decade, the hidden potentials of biological sources for the biofabrication of nanomaterials as bequeathed rapid research for remediating the environmental pollution in a sustainable manner. The biofabricated nanomaterials possess an inimitable phenomenon such as photo and enzymatic catalysis, electrostatic interaction, surface active site interactions, etc., contributing for the detoxification of various pollutants. With this background, the current review highlights the emerging biofabricated nano-based adsorbent materials and their underlying mechanisms addressing the environmental remediation of persistent organic pollutants, heavy metal (loid)s, phytopathogens, special attention to the reduction of pathogen-derived toxins and air pollutants. Each category is illustrated with suitable examples, fundamental mechanism, and graphical representations, along with societal applications. Finally, the future and sustainable development of eco-friendly biofabricated nanomaterial-based adsorbents is discussed.

An overview of zinc oxide nanoparticles produced by plant extracts for anti-tuberculosis treatments

Tuberculosis (TB), induced by Mycobacterium tuberculosis (MTB), is a fatal infectious disease that kills millions of lives worldwide. The emergence of drug-resistant and multidrug-resistant cases is regarded as one of the most challenging threats to TB control due to the low cure rate. Therefore, TB and drug-resistant TB epidemics urge us to explore more effective therapies. The increasing knowledge of nanotechnology has extended to some nanomedicines for disease treatment in the clinic, which also provides novel possibilities for nano-based medicines for TB treatment. Zinc oxide nanoparticles (ZnO NPs) have gained increasing attention for anti-bacterial uses based on their strong ability to induce reactive oxidative species (ROS) and release bactericidal Zinc ions (Zn²⁺), which are expected to act as novel strategies for TB and drug-resistant TB treatment. Some active herbal medicines from plant extracts have been widely reported to show attractive anti-bacterial activity for infectious treatment, including TB. Here, we summarize the synthesis of ZnO NPs using plant extracts (green synthesized ZnO NPs) and further discuss their potentials for anti-TB treatments. This is the first review article discussing the anti-TB activity of ZnO NPs produced using plant extracts, which might contribute to the further applications of green synthesized ZnO NPs for anti-TB and drug-resistant TB treatment.

Toward a Better Understanding of Metal Nanoparticles, a Novel Strategy from Eucalyptus Plants

Nanotechnology is a promising tool that has opened the doors of improvement to the quality of human's lives through its potential in numerous technological aspects. Green chemistry of nanoscale materials (1-100 nm) is as an effective and sustainable strategy to manufacture homogeneous nanoparticles (NPs) with unique properties, thus making the synthesis of green NPs, especially metal nanoparticles (MNPs), the scientist's core theme. Researchers have tested different organisms to manufacture MNPs and the results of experiments confirmed that plants tend to be the ideal candidate amongst all entities and are suitable to synthesize a wide variety of MNPs. Natural and cultivated Eucalyptus forests are among woody plants used for landscape beautification and as forest products. The present review has been written to reflect the efficacious role of Eucalyptus in the synthesis of MNPs. To better understand this, the route of extracting MNPs from plants, in general, and Eucalyptus, in particular, are discussed. Furthermore, the crucial factors influencing the process of MNP synthesis from Eucalyptus as well as their characterization and recent applications are highlighted. Information gathered in this review is useful to build a basis for new prospective research ideas on how to exploit this woody species in the production of MNPs. Nevertheless, there is a necessity to feed the scientific field with further investigations on wider applications of Eucalyptus-derived MNPs.

Ameliorated Antibacterial and Antioxidant Properties by Trichoderma harzianum Mediated Green Synthesis of Silver Nanoparticles

Biosynthesis of silver nanoparticles using beneficial Trichoderma harzianum is a simple, eco-friendly and cost-effective route. Secondary metabolites secreted by T. harzianum act as capping and reducing agents that can offer constancy and can contribute to biological activity. The present study aimed to synthesize silver nanoparticles using T. harzianum cell filtrate and investigate different bioactive metabolites based on LC-MS/MS analysis. The synthesized silver nanoparticles (AgNPs) from T. harzianum were characterized by ultraviolet-visible spectrophotometry, Fourier transform infrared spectrometry (FT-IR), energy-dispersive spectroscopy (EDS), dynamic light scattering (DLS), X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The surface plasmon resonance of synthesized particles formed a peak centered near 438 nm. The DLS study determined the average size of AgNPs to be 21.49 nm. The average size of AgNPs was measured to be 72 nm by SEM. The cubic crystal structure from XRD analysis confirmed the synthesized particles as silver nanoparticles. The AgNPs exhibited remarkable antioxidant properties, as determined by DPPH and ferric reducing antioxidant power (FRAP) assay. The AgNPs also exhibited broad-spectrum antibacterial activity against two Gram-positive bacteria (S. aureus and B. subtilis) and two Gram-negative bacteria (E. coli and R. solanacearum). The minimum inhibitory concentration (MIC) of AgNPs towards bacterial growth was evaluated. The antibacterial activity of AgNPs was further confirmed by fluorescence microscopy and SEM analysis.

Myco-engineered selenium nanoparticles elicit resistance against tomato late blight disease by regulating differential expression of cellular, biochemical and defense responsive genes

With the advent of rapid evolution of oomycete pathogen lineages, the need for sustainable agriculture practices has become the need of the hour. The late blight of tomato caused by Phytopthora infestans, has recently emerged as one such devastating disease in India that led to huge crop losses. Hence, in the present work seed priming with mycogenic selenium nanoparticles (SeNPs) for elicitation of resistance against tomato late blight disease is investigated. It also aims to understand the defense responses triggered by SeNPs at cellular, biochemical and transcriptomic levels. Enhanced plant growth parameters were observed in bioactive SeNPs-primed tomato plants as compared to control plants. SeNPs-primed and pathogen inoculated plants exhibited a significant protection of 72.9 % against late blight disease. The primed plants also recorded a remarkable accumulation of lignin, callose and hydrogen peroxide that serve as the cellular defense over the control plants. Further, an elevated level of lipoxygenase (LOX), phenylalanine lyase (PAL), β-1,3-glucanase (GLU), superoxide dismutase (SOD) corroborated the biochemical defense in primed plants, which was also reflected in the corresponding transcriptome profiling of the genes encoding the enzymes. Thus, the present study represents an orchestrated correlation between resistance and defense responses incited by SeNPs against tomato late blight disease, which can be used as nano-biostimulant fungicide in protecting tomato plants.

Nanoparticles in Agroindustry: Applications, Toxicity, Challenges, and Trends

Nanotechnology is a tool that in the last decade has demonstrated multiple applications in several sectors, including agroindustry. There has been an advance in the development of nanoparticulated systems to be used as fertilizers, pesticides, herbicides, sensors, and quality stimulants, among other applications. The nanoencapsulation process not only protects the active ingredient but also can affect the diffusion, interaction, and activity. It is important to evaluate the negative aspects of the use of nanoparticles (NPs) in agriculture. Given the high impact of the nanoparticulated systems in the agro-industrial field, this review aims to address the effects of various nanomaterials on the morphology, metabolomics, and genetic modification of several crops.

Plant extract mediated synthesis enhanced the functional properties of silver ferrite nanoparticles over chemical mediated synthesis

In this study, the antibacterial, antioxidant and cytotoxicity behaviour of silver ferrite nanoparticles (AgFeO2 NPs) synthesized through chemical and green routes were compared. Green synthesis (Bio) of AgFeO2 NPs were prepared by precipitation method using Amaranthus blitum leaves extract as a reducing agent. Chemical synthesis (Che) of AgFeO2 NPs was mediated by sodium borohydride as a reducing agent. [AgFeO2 (Bio)] NPs showed reduced size, better monodispersity and surface area compared to [AgFeO2 (Che)] NPs. The results showed that synthesized NPs have better antibacterial activity against E. coli than S. aureus. In addition, 250 μg of AgFeO2 (Bio) and (Che) NPs showed antioxidant efficiency of 98 and 86%. The results showed that [AgFeO2 (Bio)] NPs showed lower cytotoxicity [AgFeO2 (Che)] NPs against human human embryonic kidney (HEK 293) cells. These results suggest that [AgFeO2 (Bio)] NPs have improved physicochemical properties thereby they can be used as an effective biocatalytic material in biotechnology.