Biocatalysis with Laccases: An Updated Overview

Enzyme-Immobilized Porous Crystals for Environmental Applications

Developing efficient technologies to eliminate or degrade contaminants is paramount for environmental protection. Biocatalytic decontamination offers distinct advantages in terms of selectivity and efficiency; however, it still remains challenging when applied in complex environmental matrices. The main challenge originates from the instability and difficult-to-separate attributes of fragile enzymes, which also results in issues of compromised activity, poor reusability, low cost-effectiveness, etc. One viable solution to harness biocatalysis in complex environments is known as enzyme immobilization, where a flexible enzyme is tightly fixed in a solid carrier. In the case where a reticular crystal is utilized as the support, it is feasible to engineer next-generation biohybrid catalysts functional in complicated environmental media. This can be interpreted by three aspects: (1) the highly crystalline skeleton can shield the immobilized enzyme against external stressors. (2) The porous network ensures the high accessibility of the interior enzyme for catalytic decontamination. And (3) the adjustable and unambiguous structure of the reticular framework favors in-depth understanding of the interfacial interaction between the framework and enzyme, which can in turn guide us in designing highly active biocomposites. This Review aims to introduce this emerging biocatalysis technology for environmental decontamination involving pollutant degradation and greenhouse gas (carbon dioxide) conversion, with emphasis on the enzyme immobilization protocols and diverse catalysis principles including single enzyme catalysis, catalysis involving enzyme cascades, and photoenzyme-coupled catalysis. Additionally, the remaining challenges and forward-looking directions in this field are discussed. We believe that this Review may offer a useful biocatalytic technology to contribute to environmental decontamination in a green and sustainable manner and will inspire more researchers at the intersection of the environment science, biochemistry, and materials science communities to co-solve environmental problems.

Optimization and purification of laccase activity from Mammaliicoccus sciuri isolated from the soils of Similipal, Odisha, India: a kinetics study of crystal violet dye decolorization

Four laccase-producing bacteria were found in soil samples from the Similipal Biosphere Reserve in Odisha, according to the current study. The isolates (SLCB1 to SLCB4) were evaluated for their laccase-producing ability in LB broth supplemented with guaiacol. The ABTS assay was performed to assess the laccase activity. The bacterium Mammaliicoccus sciuri shows the highest laccase activity i.e., 0.5125 U/L at the optimized conditions of pH 5.5, temperature 32.5 °C, ABTS concentration of 0.75 μl with an incubation time of 9 d. Laccase activity of M. sciuri grown in Sawdust was significantly increased in comparison to that in other agro wastes. The partially purified laccase enzyme after ammonium sulfate precipitation and dialysis showed a molecular weight of ∼58.5 kDa as determined by SDS-PAGE. A decolorization efficiency of 66.67% was recorded for the dye crystal violet after 1 h treatment with dialyzed laccase enzyme compared with phenol red, brilliant blue, and methylene blue.

Harnessing the potential of white rot fungi and ligninolytic enzymes for efficient textile dye degradation: A comprehensive review

The contamination of wastewater with textile dyes has emerged as a pressing environmental concern due to its persistent nature and harmful effects on ecosystems. Conventional dye treatment methods have proven inadequate in effectively breaking down complex dye molecules. However, a promising alternative for textile dye degradation lies in the utilization of white rot fungi, renowned for their remarkable lignin-degrading capabilities. This review provides a comprehensive analysis of the potential of white rot fungi in degrading textile dyes, with a particular focus on their ligninolytic enzymes, specifically examining the roles of lignin peroxidase (LiP), manganese peroxidase (MnP), and laccase in the degradation of lignin and their applications in textile dye degradation. The primary objective of this paper is to elucidate the enzymatic mechanisms involved in dye degradation, with a spotlight on recent research advancements in this field. Additionally, the review explores factors influencing enzyme production, including culture conditions and genetic engineering approaches. The challenges associated with implementing white rot fungi and their ligninolytic enzymes in textile dye degradation processes are also thoroughly examined. Textile dye contamination poses a significant environmental threat due to its resistance to conventional treatment methods. White rot fungi, known for their ligninolytic capabilities, offer an innovative approach to address this issue. The review delves into the intricate mechanisms through which white rot fungi and their enzymes, including LiP, MnP, and laccase, break down complex dye molecules. These enzymes play a pivotal role in lignin degradation, a process that can be adapted for textile dye removal. The review also emphasizes recent developments in this field, shedding light on the latest findings and innovations. It discusses how culture conditions and genetic engineering techniques can influence the production of these crucial enzymes, potentially enhancing their efficiency in textile dye degradation. This highlights the potential for tailored enzyme production to address specific dye contaminants effectively. The paper also confronts the challenges associated with integrating white rot fungi and their ligninolytic enzymes into practical textile dye degradation processes. These challenges encompass issues like scalability, cost-effectiveness, and regulatory hurdles. By acknowledging these obstacles, the review aims to pave the way for practical and sustainable applications of white rot fungi in wastewater treatment. In conclusion, this comprehensive review offers valuable insights into how white rot fungi and their ligninolytic enzymes can provide a sustainable solution to the urgent problem of textile dye-contaminated wastewater. It underscores the enzymatic mechanisms at play, recent research breakthroughs, and the potential of genetic engineering to optimize enzyme production. By addressing the challenges of implementation, this review contributes to the ongoing efforts to mitigate the environmental impact of textile dye pollution. PRACTITIONER POINTS: Ligninolytic enzymes from white rot fungi, like LiP, MnP, and laccase, are crucial for degrading textile dyes. Different dyes and enzymatic mechanisms is vital for effective wastewater treatment. Combine white rot fungi-based strategies with mediator systems, co-culturing, or sequential treatment approaches to enhance overall degradation efficiency. Emphasize the broader environmental impact of textile dye pollution and position white rot fungi as a promising avenue for contributing to mitigation efforts. This aligns with the overarching goal of sustainable wastewater treatment practices and environmental conservation. Consider scalability, cost-effectiveness, and regulatory compliance to pave the way for sustainable applications that can effectively mitigate the environmental impact of textile dye pollution.

Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Direct arene trifluoromethylation enabled by promiscuous activity of fungal laccase

Laccase from Trametes versicolor was found to oxidize non-phenolic arenes and enable the trifluoromethylation of arenes in the presence of in situ generated CF3 radicals at a catalyst loading as low as 0.0034%. The biocatalytic trifluoromethylation proceeded under mild conditions and could increase the yield by up to 12 fold, compared to the control.

Laccase Engineering: Redox Potential Is Not the Only Activity-Determining Feature in the Metalloproteins

Laccase, one of the metalloproteins, belongs to the multicopper oxidase family. It oxidizes a wide range of substrates and generates water as a sole by-product. The engineering of laccase is important to broaden their industrial and environmental applications. The general assumption is that the low redox potential of laccases is the principal obstacle, as evidenced by their low activity towards certain substrates. Therefore, the primary goal of engineering laccases is to improve their oxidation capability, thereby increasing their redox potential. Even though some of the determinants of laccase are known, it is still not entirely clear how to enhance its redox potential. However, the laccase active site has additional characteristics that regulate the enzymes' activity and specificity. These include the electrostatic and hydrophobic environment of the substrate binding pocket, the steric effect at the substrate binding site, and the orientation of the binding substrate with respect to the T1 site of the laccase. In this review, these features of the substrate binding site will be discussed to highlight their importance as a target for future laccase engineering.

Peculiar Properties of Template-Assisted Aniline Polymerization in a Buffer Solution Using Laccase and a Laccase-Mediator System as Compared with Chemical Polymerization

The conventional chemical polymerization of aniline has been described in multiple publications, while enzymatic polymerization has been poorly explored. A comparative study of the template-assisted enzymatic and chemical polymerization of aniline in a buffer solution of sodium dodecylbenzenesulfonate micelles was performed for the first time. The high-redox potential laccase from the fungus Trametes hirsuta was used as a catalyst and air oxygen served as an oxidant. Potentiometric and spectral methods have shown that oligomeric/polymeric products of the enzymatic polymerization of aniline are synthesized in the conducting emeraldine salt form immediately after the reaction is initiated by the enzyme. The use of the laccase-mediator system enabled a higher rate of enzymatic polymerization and a higher yield of final products. Potassium octocyanomolybdate (IV) served as a redox mediator. The products of the enzymatic polymerization of aniline were studied by the ATR-FTIR, MALDI-TOF and atomic force microscopy methods. The chemical oxidative polymerization of aniline under the same conditions resulted in forming a non-conducting dark brown product.

Eco-friendly TEMPO/laccase/O2 biocatalytic system for degradation of Indigo Carmine: operative conditions and laccase inactivation

The biocatalytic system laccase/TEMPO/O₂ has attracted the attention of researchers over the past two decades. A variety of applications for the system include organic synthesis, modification of cellulose, and oxidative degradation of environmental contaminants. A rigorous and predictable quantitative assessment of the change in enzymatic activity under the influence of a mediator is important for such a system. In this study, the operative conditions for carrying out a model reaction for the degradation of the synthetic dye Indigo Carmine in the presence of Trametes versicolor laccase/TEMPO were determined and the enzyme inactivation under the action of a mediator and substrate was studied. The long-term stability of Trametes versicolor laccase was assessed and the regression model of the response surface of laccase activity under the influence of TEMPO was created. It has been shown that laccase is inactivated in the presence of TEMPO, but the addition of the dye, CuSO₄ or CuCl₂ reduces this effect. The system under study can be used repeatedly for the Indigo Carmine decolorization, however, a gradual falling rate during the process is observed from cycle to cycle. This is due to two reasons - firstly, a decrease in the enzyme activity with each batch and secondly, the consumption of the mediator (22% within 5 days). Relatively high enzyme activity (>40%) is maintained after 73 cycles (1 portion of IC contained 25 μM) using 500 μM TEMPO and 0.12 U mL^-1 laccase. The laccase/TEMPO system has shown its effectiveness in the treatment of artificial wastewater containing high concentrations of Indigo carmine (0.5 g L^-1). In this case, the dye solution becomes 100% colorless within 5 hours in the presence of dye bath components and within 7.5 hours in a buffer solution.

Wood Degradation by Fomitiporia mediterranea M. Fischer: Exploring Fungal Adaptation Using Metabolomic Networking

Fomitiporia mediterranea M. Fischer (Fmed) is a white-rot wood-decaying fungus associated with one of the most important and challenging diseases in vineyards: Esca. To relieve microbial degradation, woody plants, including Vitis vinifera, use structural and chemical weapons. Lignin is the most recalcitrant of the wood cell wall structural compounds and contributes to wood durability. Extractives are constitutive or de novo synthesized specialized metabolites that are not covalently bound to wood cell walls and are often associated with antimicrobial properties. Fmed is able to mineralize lignin and detoxify toxic wood extractives, thanks to enzymes such as laccases and peroxidases. Grapevine wood's chemical composition could be involved in Fmed's adaptation to its substrate. This study aimed at deciphering if Fmed uses specific mechanisms to degrade grapevine wood structure and extractives. Three different wood species, grapevine, beech, and oak. were exposed to fungal degradation by two Fmed strains. The well-studied white-rot fungus Trametes versicolor (Tver) was used as a comparison model. A simultaneous degradation pattern was shown for Fmed in the three degraded wood species. Wood mass loss after 7 months for the two fungal species was the highest with low-density oak wood. For the latter wood species, radical differences in initial wood density were observed. No differences between grapevine or beech wood degradation rates were observed after degradation by Fmed or by Tver. Contrary to the Tver secretome, one manganese peroxidase isoform (MnP2l, jgi protein ID 145801) was the most abundant in the Fmed secretome on grapevine wood only. Non-targeted metabolomic analysis was conducted on wood and mycelium samples, using metabolomic networking and public databases (GNPS, MS-DIAL) for metabolite annotations. Chemical differences between non-degraded and degraded woods, and between mycelia grown on different wood species, are discussed. This study highlights Fmed physiological, proteomic and metabolomic traits during wood degradation and thus contributes to a better understanding of its wood degradation mechanisms.

The Biomodified Lignin Platform: A Review

A reliance on fossil fuel has led to the increased emission of greenhouse gases (GHGs). The excessive consumption of raw materials today makes the search for sustainable resources more pressing than ever. Technical lignins are mainly used in low-value applications such as heat and electricity generation. Green enzyme-based modifications of technical lignin have generated a number of functional lignin-based polymers, fillers, coatings, and many other applications and materials. These bio-modified technical lignins often display similar properties in terms of their durability and elasticity as fossil-based materials while also being biodegradable. Therefore, it is possible to replace a wide range of environmentally damaging materials with lignin-based ones. By researching publications from the last 20 years focusing on the latest findings utilizing databases, a comprehensive collection on this topic was crafted. This review summarizes the recent progress made in enzymatically modifying technical lignins utilizing laccases, peroxidases, and lipases. The underlying enzymatic reaction mechanisms and processes are being elucidated and the application possibilities discussed. In addition, the environmental assessment of novel technical lignin-based products as well as the developments, opportunities, and challenges are highlighted.

Biocatalytic stereoselective synthesis of pyrrolidine-2,3-diones containing all-carbon quaternary stereocenters

Highly functionalized pyrrolidine-2,3-diones can be synthesized efficiently and stereoselectively under mild conditions using a biocatalytic approach. The reaction led to the formation of new all-carbon quaternary stereocenters from Myceliophthora thermophila laccase (Novozym 51003) catalyzed oxidation of catechols to ortho-quinones and subsequent 1,4-addition with 3-hydroxy-1,5-dihydro-2H-pyrrol-2-ones. The reaction was conducted with various substituents on both reactants, resulting in 13 products in moderate to good yields (42-91%). The same 15 reactions were also tested with K₃Fe(CN)₆ as a catalyst, but here only one reaction resulted in a product (60% yield).

Potential of the enzyme laccase for the synthesis and derivatization of antimicrobial compounds

Laccases [E.C. 1.10.3.2, benzenediol:dioxygen oxidoreductase] can oxidize phenolic substances, e.g. di- and polyphenols, hydroxylated biaryls, aminophenols or aryldiamines. This large substrate spectrum is the basis for various reaction possibilities, which include depolymerization and polymerization reactions, but also the coupling of different substance classes. To catalyze these reactions, laccases demand only atmospheric oxygen and no depletive cofactors. The utilization of mild and environmentally friendly reaction conditions such as room temperature, atmospheric pressure, and the avoidance of organic solvents makes the laccase-mediated reaction a valuable tool in green chemistry for the synthesis of biologically active compounds such as antimicrobial substances. In particular, the production of novel antibiotics becomes vital due to the evolution of antibiotic resistances amongst bacteria and fungi. Therefore, laccase-mediated homo- and heteromolecular coupling reactions result in derivatized or newly synthesized antibiotics. The coupling or derivatization of biologically active compounds or its basic structures may allow the development of novel pharmaceuticals, as well as the improvement of efficacy or tolerability of an already applied drug. Furthermore, by the laccase-mediated coupling of two different active substances a synergistic effect may be possible. However, the coupling of compounds that have no described efficacy can lead to biologically active substances by means of laccase. The review summarizes laccase-mediated reactions for the synthesis of antimicrobial compounds valuable for medical purposes. In particular, reactions with two different reaction partners were shown in detail. In addition, studies with in vitro and in vivo experimental data for the confirmation of the antibacterial and/or antifungal efficacy of the products, synthesized with laccase, were of special interest. Analyses of the structure-activity relationship confirm the great potential of the novel compounds. These substances may represent not only a value for pharmaceutical and chemical industry, but also for other industries due to a possible functionalization of surfaces such as wood or textiles.

Expanding the Promiscuity of a Copper-Dependent Oxidase for Enantioselective Cross-Coupling of Indoles

Herein, we disclose the highly enantioselective oxidative cross-coupling of 3-hydroxyindole esters with various nucleophilic partners as catalyzed by copper efflux oxidase. The biocatalytic transformation delivers functionalized 2,2-disubstituted indolin-3-ones with excellent optical purity (90-99 % ee), which exhibited anticancer activity against MCF-7 cell lines, as shown by preliminary biological evaluation. Mechanistic studies and molecular docking results suggest the formation of a phenoxyl radical and enantiocontrol facilitated by a suited enzyme chiral pocket. This study is significant with regard to expanding the catalytic repertoire of natural multicopper oxidases as well as enlarging the synthetic toolbox for sustainable asymmetric oxidative coupling.

Studies on the Oxidation of Aromatic Amines Catalyzed by Trametes versicolor Laccase

The bio-oxidation of a series of aromatic amines catalyzed by T. versicolor laccase has been investigated exploiting either commercially available nitrogenous substrates [(E)-4-vinyl aniline and diphenyl amine] or ad hoc synthetized ones [(E)-4-styrylaniline, (E)-4-(prop-1-en-1-yl)aniline and (E)-4-(((4-methoxyphenyl)imino)methyl)phenol]. At variance to their phenolic equivalents, the investigated aromatic amines were not converted into the expected cyclic dimeric structures under T. versicolor catalysis. The formation of complex oligomeric/polymeric or decomposition by-products was mainly observed, with the exception of the isolation of two interesting but unexpected chemical skeletons. Specifically, the biooxidation of diphenylamine resulted in an oxygenated quinone-like product, while, to our surprise, in the presence of T. versicolor laccase (E)-4-vinyl aniline was converted into a 1,2-substited cyclobutane ring. To the best of our knowledge, this is the first example of an enzymatically triggered [2 + 2] olefin cycloaddition. Possible reaction mechanisms to explain the formation of these products are also reported.

Current Trends and Perspectives in Microbial Bioconversions of Steroids

The microbiological transformation of sterols is currently the technological basis for the industrial production of valuable steroid precursors, the so-called synthons, from which a wide range of steroid and indane isoprenoids are obtained by combined chemical and enzymatic routes. These compounds include value-added corticoids, neurosteroids, sex hormones, bile acids, and other terpenoid lipids required by the medicine, pharmaceutical, food, veterinary, and agricultural industries.Progress in understanding the molecular mechanisms of microbial degradation of steroids, and the development and implementation of genetic technologies, opened a new era in steroid biotechnology. Metabolic engineering of microbial producers makes it possible not only to improve the biocatalytic properties of industrial strains by enhancing their target activity and/or suppressing undesirable activities in order to avoid the formation of by-products or degradation of the steroid core, but also to redirect metabolic fluxes in cells towards accumulation of new metabolites that may be useful for practical applications. Along with whole-cell catalysis, the interest of researchers is growing in enzymatic methods that make it possible to carry out selective structural modifications of steroids, such as the introduction of double bonds, the oxidation of steroidal alcohols, or the reduction of steroid carbonyl groups. A promising area of research is strain engineering based on the heterologous expression of foreign steroidogenesis systems (bacterial, fungal, or mammalian) that ensure selective formation of demanded hydroxylated steroids.Here, current trends and progress in microbial steroid biotechnology over the past few years are briefly reviewed, with a particular focus on the application of metabolic engineering and synthetic biology techniques to improve existing and create new whole-cell microbial biocatalysts.

Deep Eutectic Solvents for Biotechnology Applications

Deep eutectic solvents (DESs) are an alternative to traditional organic solvents and ionic liquids and meet the requirements of "green" chemistry. They are easy to prepare using low-cost constituents, are non-toxic and biodegradable. The review analyzes literature on the use of DES in various fields of biotechnology, provides data on the types of DESs, methods for their preparation, and properties. The main areas of using DESs in biotechnology include extraction of physiologically active substances from natural resources, pretreatment of lignocellulosic biomass to improve enzymatic hydrolysis of cellulose, production of bioplastics, as well as a reaction medium for biocatalytic reactions. The aim of this review is to summarize available information on the use of new solvents for biotechnological purposes.

Investigation of Abortiporus biennis lignocellulolytic toolbox, and the role of laccases in polystyrene degradation

White-rot basidiomycetes are the only microorganisms able to produce both hydrolytic (cellulases and hemicellulases) and oxidative (ligninolytic) enzymes for degrading all lignocellulose constituents. Their enzymatic machinery makes them ideal for the discovery of novel enzymes with desirable properties. In the present work, Abortiporus biennis, a white-rot fungus, was studied in regard to its lignocellulolytic potential. Secretomics and biochemical analyses were employed to study the strain's enzymatic arsenal, after growth in corn stover cultures and xylose-based defined media. The results revealed the presence of all the necessary enzymatic activities for complete breakdown of biomass, while the prominent role of oxidative enzymes in the lignocellulolytic strategy of the strain became evident. Two novel laccases, AbiLac1 and AbiLac2, were isolated from the culture supernatant with ion-exchange chromatography. Characterization of purified laccases revealed their ability to oxidize a wide variety of phenolic and non-phenolic substrates. AbiLac1 was found to oxidize polystyrene powder, showing high depolymerization potential, based on radical chain scission mechanism as evidenced by molecular weight decrease. The results of the present study demonstrate the biotechnological potential of the unexplored enzymatic machinery of white-rot basidiomycetes, including the design of improved lignocellulolytic cocktails, as well as the degradation and/or valorization of plastic waste materials.

Laccase-Carrying Polylactic Acid Electrospun Fibers, Advantages and Limitations in Bio-Oxidation of Amines and Alcohols

Laccases are oxidative enzymes that could be good candidates for the functionalization of biopolymers with several applications as biosensors for the determination of bioactive amine and alcohols, for bioremediation of industrial wastewater, and for greener catalysts in oxidation reactions in organic synthesis, especially used for non-phenolic compounds in combination with redox mediators in the so-called Laccase Mediator System (LMS). In this work, we describe the immobilization of Laccase from Trametes versicolor (LTv) in poly-L-lactic acid (PLLA) nanofibers and its application in LMS oxidation reactions. The PLLA-LTv catalysts were successfully produced by electrospinning of a water-in-oil emulsion with an optimized method. Different enzyme loadings (1.6, 3.2, and 5.1% ^w/_w) were explored, and the obtained mats were thoroughly characterized. The actual amount of the enzyme in the fibers and the eventual enzyme leaching in different solvents were evaluated. Finally, the PLLA-LTv mats were successfully applied as such in the oxidation reaction of catechol, and in the LMS method with TEMPO as mediator in the oxidation of amines with the advantage of easier work-up procedures by the immobilized enzyme. However, the PLLA-LTv failed the oxidation of alcohols with respect to the free enzyme. A tentative explanation was provided.

Diarylation of thiazolopyrimidines by laccase and their in vitro evaluation as antitumor agents

A mild and efficient method was developed for the synthesis of new derivatives of thiazolo[3,2-a] pyrimidin-3(2H)-ones from available starting materials based on the oxidation of catechols to ortho-quinone by Myceliophthora thermophila laccase (Novozym 51,003) and 1,4-addition of active methylene carbon to these in situ generated intermediates in moderate to good yields (35-93%). The structure of the products was confirmed through ¹H NMR, ¹³C NMR, HMBC, HSQC, DEPT-135, and mass spectroscopy techniques. These novel compounds were evaluated as active antitumor agents against human colorectal adenocarcinoma and liver adenocarcinoma cell lines. All compounds displayed potent inhibition activities against the HT-29 cell line with IC₅₀ values of 9.8-35.9 µM, superior to the positive control doxorubicin, and most showed potent anticancer activities against the HepG2 cell line.

A comparative screening of laccase-mediator systems by white-rot fungi laccases for biocatalytic benzyl alcohol oxidation

Production of value-added compounds from waste materials is of utmost importance for the development of a sustainable society especially regarding their use as catalysts in industrially relevant synthetic reactions. Herein, we show the production of laccases from four white-rot fungi, which were grown on agricultural residues, specifically Trametes versicolor 11269, Pleurotus ostreatus 1020, Panus tigrinus 707 and Lentinula edodes SC-495. The produced laccases were tested on a laccase-mediator system (LMS) for the biocatalytic oxidation of the model substrate benzyl alcohol into benzaldehyde. The LMS was carried out in the presence both of tetrahydrofuran as co-solvent and of the mediator 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) due to its high redox potential and its ability to perform the oxidation. Tolerance studies showed that the dialyzed solutions were able to tolerate 1% (99:1 v/v) of co-solvent, whereas a concentration of 10% v/v had a detrimental activity. Performances in the biocatalytic oxidation of laccase solutions from different purification steps were compared. Similar conversion was observed for laccase in dialysis (raw) and gel filtration (GF) product versus commercial T. versicolor laccase. The latter oxidized almost 99% of substrate while the other laccase solutions were able to reach a conversion from 91% for the laccase solution from P. tigrinus 707 after dialysis, to 50% for the laccase solution from P. ostreatus 1020 after gel filtration. This work highlights the potential of unpurified laccase solutions to be used as catalysts in synthetic reactions.

An Organic Chemist's Guide to Mediated Laccase Oxidation

Laccases are oxidases that only require O₂ as a terminal oxidant. Thus, they provide an attractive green alternative to established alcohol oxidation protocols. However, laccases typically require catalytic amounts of mediator molecules to serve as electron shuttles between the enzyme and desired substrate. Consequently, laccase-mediator systems are defined by a multitude of parameters such as, e. g., the choice of laccase and mediator, the respective concentrations, pH, and the oxygen source. This complexity and a perceived lack of comparable data throughout literature represent an entry burden into this field. To provide a solid starting point, particularly for organic chemists, we herein provide a time-resolved, quantitative laccase and mediator screening based on the oxidation of anis alcohol as model reaction. We measured the redox potentials of mediators under the reaction conditions to relate them to their performance. Lastly, for particularly efficient laccase-mediator pairs, we screened important reaction parameters, resulting in an optimized setup for mediator-assisted laccase catalyzed oxidations.

Microbial detoxification of lignocellulosic biomass hydrolysates: Biochemical and molecular aspects, challenges, exploits and future perspectives

Valorization of lignocellulosic biomass (LB) has the potential to secure sustainable energy production without impacting food insecurity, whist relieving over reliance on finite fossil fuels. Agro-derived lignocellulosic residues such as wheat straw, switchgrass, rice bran, and miscanthus have gained relevance as feedstocks for the production of biofuels and chemicals. However, the microorganisms employed in fermentative conversion of carbohydrates to fuels and chemicals are unable to efficiently utilize the sugars derived from LB due to co-production of lignocellulose-derived microbial inhibitory compounds (LDMICs) during LB pretreatment. LDMICs impact microbial growth by inhibition of specific enzymes, cause DNA and cell membrane damage, and elicit cellular redox imbalance. Over the past decade, success has been achieved with the removal of LDMICs prior to fermentation. However, LDMICs removal by chemical processes is often accompanied by sugar losses, which negatively impacts the overall production cost. Hence, in situ removal of LDMICs by fermentative organisms during the fermentation process has garnered considerable attention as the "go-to" approach for economical LDMICs detoxification and bio-chemicals production. In situ removal of LDMICs has been pursued by either engineering more robust biocatalysts or isolating novel microbial strains with the inherent capacity to mineralize or detoxify LDMICs to less toxic compounds. While some success has been made along this line, efficient detoxification and robust production of target bio-chemicals in lignocellulosic hydrolysates (LHs) under largely anaerobic fermentative conditions remains a lingering challenge. Consequently, LB remains an underutilized substrate for bio-chemicals production. In this review, the impact of microbial LH detoxification on overall target molecule production is discussed. Further, the biochemical pathways and mechanisms employed for in situ microbial detoxification of furanic LDMICs [e.g., furfural and 5-hydroxymethylfurfural (HMF)] and phenolic LDMICs (e.g., syringaldehyde, p-coumaric acid, 4-hydroxybenzaldehyde, vanillin, and ferulic acid) are discussed. More importantly, metabolic engineering strategies for the development of LDMIC-tolerant and bio-chemicals overproducing strains and processes are highlighted.

Enzymatically Synthesized Polyaniline Doped with Copper Ions: Physico-Chemical and Antimicrobial Properties of the Product

Enzymatic synthesis of the polyaniline (PANI)/sodium polystyrenesulfonate (PSS) interpolyelectrolyte complex, in which PANI is doped with Cu(II) ions, has been developed. The biocatalyst for aniline (ANI) polymerization was the fungal laccase Trametes hirsuta and the oxidizing agent was atmospheric oxygen. The resulting PANI-Cu/PSS complex was studied by UV–visible and FTIR-ATR spectroscopy, and X-ray fluorescence analysis. The copper content in PANI‑Cu/PSS was ~8 wt %. The minimum inhibitory concentration (MIC) of the PANI-Cu/PSS complex against gram-negative (Escherichia coli) and gram-positive (Staphylococcus aureus) bacteria was 2.65 and 0.66 mg/mL, respectively.

Betaine-Based Deep Eutectic Solvent as a New Media for Laccase-Catalyzed Template-Guided Polymerization/Copolymerization of Aniline and 3-Aminobenzoic Acid

Deep eutectic solvents (DESs) can compensate for some of the major drawbacks of traditional organic solvents and ionic liquids and meet all requirements of green chemistry. However, the potential of their use as a medium for biocatalytic reactions has not been adequately studied. In this work we used the DES betaine-glycerol with a molar ratio of 1:2 as co-solvent for enzymatic template-guided polymerization/copolymerization of aniline (ANI) and 3-aminobenzoic acid (3ABA). The laccase from the basidial fungus Trametes hirsuta and air oxygen served as catalyst and oxidant, respectively. Sodium polystyrene sulfonate (PSS) was used as template. Interpolyelectrolyte complexes of homopolymers polyaniline (PANI) and poly(3-aminobenzoic acid) (P3ABA) and copolymer poly(aniline-co-3-aminobenzoic acid) (P(ANI-3ABA)) were prepared and their physico-chemical properties were studied by UV-Vis and FTIR spectroscopy and cyclic voltammetry. According to the results obtained by atomic force microscopy, PANI/PSS had a granular shape, P(ANI-3ABA)/PSS had a spherical shape and P3ABA/PSS had a spindle-like shape. The copolymer showed a greater antimicrobial activity against Escherichia coli and Staphylcocus aureus as compared with the homopolymers. The minimal inhibitory concentration of the P(ANI-3ABA)/PSS against the gram-positive bacterium S. aureus was 0.125 mg mL⁻¹.

Efficient synthesis 1,4-cyclohexanedicarboxaldehyde by an engineered alcohol oxidase

In this study, we selected and engineered a flavin adenine dinucleotide (FAD)-dependent alcohol oxidase (AOX) to produce 1,4-cyclohexanedicarboxaldehyde (CHDA), an initial raw material for spiral compounds, from 1,4-cyclohexanedimethanol (CHDM). First, the structure of alcohol oxidase from Arthrobacter cholorphenolicus (AcCO) was analyzed, and the mechanism of AcCO-catalyzed primary alcohol oxidation was elucidated, demonstrating that the energy barrier of the hydride (H-) transfer (13.4 kcal·mol-1 and 20.4 kcal·mol-1) decreases the catalytic efficiency of the primary alcohol oxidation reaction. Therefore, we designed a protein engineering strategy to adjust the catalytically active conformation to shorten the distance of hydride (H-) transfer and further decreased the core energy barrier. Following this strategy, variant W4 (S101A/H351V/N378S/Q329N) was obtained with 112.5-fold increased catalytic efficiency to produce CHDA compared to that of the wild-type strain. The 3 L scale preparation of CHDA reached a titer up to 29.6 g·L-1 with a 42.2% yield by an Escherichia coli whole-cell catalyst, which demonstrates the potential of this system for industrial application.

Hydrophilic Nonwoven Nanofiber Membranes as Nanostructured Supports for Enzyme Immobilization

The high porosity, interconnected pore structure, and high surface area-to-volume ratio make the hydrophilic nonwoven nanofiber membranes (NV-NF-Ms) promising nanostructured supports for enzyme immobilization in different biotechnological applications. In this work, NV-NF-Ms with excellent mechanical and chemical properties were designed and fabricated by electrospinning in one step without using additives or complicated crosslinking processes after electrospinning. To do so, two types of ultrahigh-molecular-weight linear copolymers with very different mechanical properties were used. Methyl methacrylate-co-hydroxyethyl methacrylate (p(MMA)-co-p(HEMA)) and methyl acrylate-co-hydroxyethyl acrylate (p(MA)-co-p(HEA)) were designed and synthesized by reverse atom transfer radical polymerization (reverse-ATRP) and copper-mediated living radical polymerization (Cu⁰-MC-LRP), respectively. The copolymers were characterized by nuclear magnetic resonance (¹H-NMR) spectroscopy and by triple detection gel permeation chromatography (GPC). The polarity, topology, and molecular weight of the copolymers were perfectly adjusted. The polymeric blend formed by (MMA)₁₀₀₂-co-(HEMA)₁₀₀₂ (M _w = 230,855 ± 7418 Da; M _n = 115,748 ± 35,567 Da; PDI = 2.00) and (MA)₁₁₇₀₉-co-(HEA)₇₈₀₆ (M _w = 1.972 × 10⁶ ± 33,729 Da; M _n = 1.395 × 10⁶ ± 35,019 Da; PDI = 1.41) was used to manufacture (without additives or chemical crosslinking processes) hydroxylated nonwoven nanofiber membranes (NV-NF-Ms-OH; 300 nm in fiber diameter) with excellent mechanical and chemical properties. The morphology of NV-NF-Ms-OH was studied by scanning electron microscopy (SEM). The suitability for enzyme binding was proven by designing a palette of different surface functionalization to enable both reversible and irreversible enzyme immobilization. NV-NF-Ms-OH were successfully functionalized with vinyl sulfone (281 ± 20 μmol/g), carboxyl (560 ± 50 μmol/g), and amine groups (281 ± 20 μmol/g) and applied for the immobilization of two enzymes of biotechnological interest. Galactose oxidase was immobilized on vinyl sulfone-activated materials and carboxyl-activated materials, while laccase was immobilized onto amine-activated materials. These preliminary results are a promising basis for the application of nonwoven membranes in enzyme technology.

Laccase-mediated synthesis of bioactive natural products and their analogues

Laccases are a class of multicopper oxidases that catalyse the one-electron oxidation of four equivalents of a reducing substrate, with the concomitant four-electron reduction of dioxygen to water. Typically, they catalyse many anabolic reactions, in which mostly phenolic metabolites were subjected to oxidative coupling. Alternatively, laccases catalyse the degradation or modification of biopolymers like lignin in catabolic processes. In recent years, laccases have proved valuable and green biocatalysts for synthesising compounds with therapeutic value, including antitumor, antibiotic, antimicrobial, and antioxidant agents. Further up to date applications include oxidative depolymerisation of lignin to gain new biomaterials and bioremediation processes of industrial waste. This review summarizes selected examples from the last decade's literature about the laccase-mediated synthesis of biologically active natural products and their analogues; these will include lignans and neolignans, dimeric stilbenoids, biflavonoids, biaryls and other compounds of potential interest for the pharmaceutical industry. In addition, a short section about applications of laccases in natural polymer modification has been included.

Exploitation of Hetero- and Phototrophic Metabolic Modules for Redox-Intensive Whole-Cell Biocatalysis

The successful realization of a sustainable manufacturing bioprocess and the maximization of its production potential and capacity are the main concerns of a bioprocess engineer. A main step towards this endeavor is the development of an efficient biocatalyst. Isolated enzyme(s), microbial cells, or (immobilized) formulations thereof can serve as biocatalysts. Living cells feature, beside active enzymes, metabolic modules that can be exploited to support energy-dependent and multi-step enzyme-catalyzed reactions. Metabolism can sustainably supply necessary cofactors or cosubstrates at the expense of readily available and cheap resources, rendering external addition of costly cosubstrates unnecessary. However, for the development of an efficient whole-cell biocatalyst, in depth comprehension of metabolic modules and their interconnection with cell growth, maintenance, and product formation is indispensable. In order to maximize the flux through biosynthetic reactions and pathways to an industrially relevant product and respective key performance indices (i.e., titer, yield, and productivity), existing metabolic modules can be redesigned and/or novel artificial ones established. This review focuses on whole-cell bioconversions that are coupled to heterotrophic or phototrophic metabolism and discusses metabolic engineering efforts aiming at 1) increasing regeneration and supply of redox equivalents, such as NAD(P/H), 2) blocking competing fluxes, and 3) increasing the availability of metabolites serving as (co)substrates of desired biosynthetic routes.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

Immobilization of Laccase on Hybrid Super-Structured Nanomaterials for the Decolorization of Phenolic Dyes

In the present work, hybrid super-structured nanomaterials were synthesized by the combination of smectite nanoclays with various carbon-based nanomaterials (graphene oxide, carbon nanotubes and adamantylamine) and were used as nanosupports for the covalent and non-covalent immobilization of laccase from Trametes versicolor (TvL). TvL was successfully immobilized on these hybrid nanomaterials, achieving high immobilization yields (up to 85%), while its conformation remained unaltered upon immobilization. The apparent kinetic constants Vmax and Km of the immobilized enzymes strongly depended on the immobilization procedure and the composition of hybrid nanomaterials. Immobilized TvL preserved up to 50% of its initial activity after 24 h of incubation at 60 °C, while free enzyme was totally deactivated. The TvL-hybrid nanomaterials bioconjugates were efficiently applied for the degradation of various synthetic dyes, exhibiting excellent decolorization capacity, as well as high reusability (up to 11 successive catalytic cycles), providing insights into the use of these bionanoconjugates on applications with environmental, and industrial interest.

Bioactive Properties of a Novel Antibacterial Dye Obtained from Laccase-Mediated Oxidation of 8-Anilino-1-naphthalenesulfonic Acid

Fungal laccase obtained from a Cerrena unicolor strain was used as an effective biocatalyst for the transformation of 8-anilino-1-naphthalenesulfonic acid into a green-coloured antibacterial compound, which can be considered as both an antimicrobial agent and a textile dye, simultaneously. The process of biosynthesis was performed in buffered solutions containing methanol as a co-solvent, allowing better solubilisation of substrate. The transformation process was optimised in terms of the buffer pH value, laccase activity, and concentrations of the substrate and co-solvent. The crude product obtained exhibited low cytotoxicity, antibacterial properties against Staphylococcus aureus and Staphylococcus epidermidis, and antioxidant properties. Moreover, the synthesised green-coloured compound proved non-allergenic and demonstrated a high efficiency of dyeing wool fibres.

A one-pot two-step synthesis of tertiary alcohols combining the biocatalytic laccase/TEMPO oxidation system with organolithium reagents in aerobic aqueous media at room temperature

The one-pot/two-step combination of enzymes and polar organometallic chemistry in aqueous media is for the first time presented as a proof-of-concept study. The unprecedented combination of the catalytic oxidation of secondary alcohols by the system laccase/TEMPO with the ultrafast addition (3 s reaction time) of polar organometallic reagents (RLi/RMgX) to the in situ formed ketones, run under air at room temperature, allows the straightforward and chemoselective synthesis of tertiary alcohols with broad substrate scope and excellent conversions (up to 96%).

Chemoenzymatic One-Pot Process for the Synthesis of Tetrahydroisoquinolines

1,2,3,4-Tetrahydroisoquinolines form a valuable scaffold for a variety of bioactive secondary metabolites and commercial pharmaceuticals. Due to the harsh or complex conditions of the conventional chemical synthesis of this molecular motif, alternative mild reaction pathways are in demand. Here we present an easy-to-operate chemoenzymatic one-pot process for the synthesis of tetrahydroisoquinolines starting from benzylic alcohols and an amino alcohol. We initially demonstrate the oxidation of 12 benzylic alcohols by a laccase/TEMPO system to the corresponding aldehydes, which are subsequently integrated in a phosphate salt mediated Pictet–Spengler reaction with m-tyramine. The reaction conditions of both individual reactions were analyzed separately, adapted to each other, and a straightforward one-pot process was developed. This enables the production of 12 1,2,3,4-tetrahydroisoquinolines with yields of up to 87% with constant reaction conditions in phosphate buffer and common laboratory glass bottles without the supplementation of any additives.

Inhibitory Potential of New Phenolic Hydrazide-Hydrazones with a Decoy Substrate Fragment towards Laccase from a Phytopathogenic Fungus: SAR and Molecular Docking Studies

Laccase from pathogenic fungi participates in both the delignification and neutralization of phytoantibiotics. Furthermore, it interferes with the hormone signaling in plants and catalyzes melanization. Infections of these pathogens contribute to loss in forestry, agriculture, and horticulture. As there is still a need to expand knowledge on efficient defense strategies against phytopathogenic fungi, the present study aimed to reveal more information on the molecular mechanisms of laccase inhibition with natural and natural-like carboxylic acid semi-synthetic derivatives. A set of hydrazide-hydrazones derived from carboxylic acids, generally including electron-rich arene units that serve as a decoy substrate, was synthesized and tested with laccase from Trametes versicolor. The classic synthesis of the title inhibitors proceeded with good to almost quantitative yield. Ninety percent of the tested molecules were active in the range of K_I = 8–233 µM and showed different types of action. Such magnitude of inhibition constants qualified the hydrazide-hydrazones as strong laccase inhibitors. Molecular docking studies supporting the experimental data explained the selected derivatives’ interactions with the enzyme. The results are promising in developing new potential antifungal agents mitigating the damage scale in the plant cultivation, gardening, and horticulture sectors.

Enantioselective Chromatographic Separation and Lipase Catalyzed Asymmetric Resolution of Biologically Important Chiral Amines

Cyanoacetamides are vital synthons in synthetic organic chemistry. However, methods to enantiopure cyanoacetamides have not yet been well explored. In this work, the preparation of cyanoacetamide synthons RS-(1a–4a) or methoxyacetamides RS-(1b–4b) in enantiopure/enriched form was investigated. Compounds S-1, S-2, R-1b, R-1a, andR-2b were prepared in enantiopure form (ee > 99%) while compounds S-4, R-2a, and R-4a were achieved in ee 9%, 80%, and 76%, respectively. Many baselines enantioselective HPLC separations of amines 1–4, their cyanoacetamides (1a–4a), and methoxyacetamides (1b–4b) were achieved by utilizing diverse mobile-phase compositions and two cellulose-based CSPs (ODH® and LUX-3® columns). Such enantioselective HPLC separations were used to monitor the lipase-catalyzed kinetic resolution of amines RS-(1–4).

Novel Transaminase and Laccase from Streptomyces spp. Using Combined Identification Approaches

Three Streptomyces sp. strains with a multitude of target enzymatic activities confirmed by functional screening, namely BV129, BV286 and BV333, were subjected to genome sequencing aiming at the annotation of genes of interest, in-depth bioinformatics characterization and functional expression of the biocatalysts. A whole-genome shotgun sequencing followed by de novo genome assembly and annotation was performed revealing genomes of 6.4, 9.4 and 7.3 Mbp, respectively. Functional annotation of the proteins of interest resulted in between 2047 and 2763 putative targets. Among the various enzymatic activities that the three Streptomyces strains demonstrated to produce by functional screening, we focused our attention on transaminases (TAs) and laccases due to their high biocatalytic potential. Bioinformatics search allowed the identification of a putative TA from Streptomyces sp. BV333 as a potentially novel broad substrate scope TA and a putative laccase from Streptomyces sp. BV286 as potentially novel blue multicopper oxidase. The two sequences were cloned and overexpressed in Escherichia coli and the two novel enzymes, transaminase Sbv333-TA and laccase Sbv286-LAC, were characterized. Interestingly, both enzymes resulted to be exceptionally thermostable, Sbv333-TA showing a melting temperature (TM = 85 °C) only slightly lower compared to the TM of the most thermostable transaminases described to date (87–88 °C) and Sbv286-LAC being even thermoactivated at temperature >60 °C. Moreover, Sbv333-TA showed a broad substrate scope and remarkably demonstrated to be active in the transamination of β-ketoesters, which are rarely accepted by currently known TAs. On the other hand, Sbv286-LAC showed an improved activity in the presence of the cosolvent acetonitrile. Overall, it was shown that a combination of approaches from standard microbiological and biochemical screens to genome sequencing and analysis is required to afford novel and functional biocatalysts.

Enzyme Catalyzed Copolymerization of Lignosulfonates for Hydrophobic Coatings

Enzymatic polymerization of lignin can generate a variety of value-added products concomitantly replacing fossil-based resources. In line with this approach, a laccase from the thermophilic fungus Myceliophthora thermophila (MtL) was used to couple a hydrophobicity enhancing fluorophenol (FP) molecule, namely 4-[4-(trifluoromethyl)phenoxy]phenol (4,4-F3MPP), as a model substrate onto lignosulfonate (LS). During the coupling reaction changes in fluorescence, phenol content, viscosity and molecular weight (size exclusion chromatography; SEC) were monitored. The effects of enzymatic coupling of FP onto LS on hydrophobicity were investigated by the means of water contact angle (WCA) measurement and determination of swelling capacity. Full polymerization of LS resulting in the production of water-insoluble polymers was achieved at a pH of 7 and 33°C. Incorporation of 2% (w/v) of FP led to an increase in WCA by 59.2% while the swelling capacity showed a decrease by 216.8%. Further, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis indicated successful covalent coupling of the FP molecule onto LS by an emerging peak at 1,320 cm^–1 in the FTIR spectrum and the evidence of Fluor in the XPS spectrum. This study shows the ability of laccase to mediate the tailoring of LS properties to produce functional polymers.

A Brief History of Colour, the Environmental Impact of Synthetic Dyes and Removal by Using Laccases

The history of colour is fascinating from a social and artistic viewpoint because it shows the way; use; and importance acquired. The use of colours date back to the Stone Age (the first news of cave paintings); colour has contributed to the social and symbolic development of civilizations. Colour has been associated with hierarchy; power and leadership in some of them. The advent of synthetic dyes has revolutionized the colour industry; and due to their low cost; their use has spread to different industrial sectors. Although the percentage of coloured wastewater discharged by the textile; food; pharmaceutical; cosmetic; and paper industries; among other productive areas; are unknown; the toxic effect and ecological implications of this discharged into water bodies are harmful. This review briefly shows the social and artistic history surrounding the discovery and use of natural and synthetic dyes. We summarise the environmental impact caused by the discharge of untreated or poorly treated coloured wastewater to water bodies; which has led to physical; chemical and biological treatments to reduce the colour units so as important physicochemical parameters. We also focus on laccase utility (EC 1.10.3.2), for discolouration enzymatic treatment of coloured wastewater, before its discharge into water bodies. Laccases (p-diphenol: oxidoreductase dioxide) are multicopper oxidoreductase enzymes widely distributed in plants, insects, bacteria, and fungi. Fungal laccases have employed for wastewater colour removal due to their high redox potential. This review includes an analysis of the stability of laccases, the factors that influence production at high scales to achieve discolouration of high volumes of contaminated wastewater, the biotechnological impact of laccases, and the degradation routes that some dyes may follow when using the laccase for colour removal.

Enzymatic Polymerization of Dihydroquercetin (Taxifolin) in Betaine-Based Deep Eutectic Solvent and Product Characterization

Deep eutectic solvents (DESs) are an alternative to conventional organic solvents in various biocatalytic reactions. Meanwhile, there have been few studies reporting on synthetic reactions in DESs or DES-containing mixtures involving oxidoreductases. In this work, we have studied the effects of several DESs based on betaine as the acceptor of hydrogen bonds on the catalytic activity and stability of laccase from the basidial fungus Trametes hirsuta and performed enzymatic polymerization of the flavonoid dihydroquercetin (DHQ, taxifolin) in a DES–buffer mixture containing 60 vol.% of betaine-glycerol DES (molar ratio 1:2). The use of the laccase redox mediator TEMPO enabled an increased yield of DHQ oligomers (oligoDHQ), with a number average molecular weight of 1800 g mol−1 and a polydispersity index of 1.09. The structure of the synthesized product was studied using different physicochemical methods. NMR spectroscopy showed that oligoDHQ had a linear structure with an average chain length of 6 monomers. A scheme for enzymatic polymerization of DHQ in a DES–buffer mixture was also proposed.

Characterization of a Yellow Laccase from Botrytis cinerea 241

Typical laccases have four copper atoms, which form three different copper centers, of which the T1 copper is responsible for the blue color of the enzyme and gives it a characteristic absorbance around 610 nm. Several laccases have unusual spectral properties and are referred to as yellow or white laccases. Only two yellow laccases from the Ascomycota phylum have been described previously, and only one amino acid sequence of those enzymes is available. A yellow laccase Bcl1 from Botrytis cinerea strain 241 has been identified, purified and characterized in this work. The enzyme appears to be a dimer with a molecular mass of 186 kDa. The gene encoding the Bcl1 protein has been cloned, and the sequence analysis shows that the yellow laccase Bcl1 is phylogenetically distinct from other known yellow laccases. In addition, a comparison of amino acid sequences, and 3D modeling shows that the Bcl1 laccase lacks a conservative tyrosine, which is responsible for absorption quenching at 610 nm in another yellow asco-laccase from Sclerotinia sclerotiorum. High thermostability, high salt tolerance, broad substrate specificity, and the ability to decolorize dyes without the mediators suggest that the Bcl1 laccase is a potential enzyme for various industrial applications.

Framework of the kinetic analysis of O2-dependent oxidative biocatalysts for reaction intensification

A framework for kinetic modelling and evaluation of the reaction intensification of O2-dependent enzyme catalyzed reactions is built from measurements of consumption rates of the initially dissolved O2 in homogeneous liquid phase.