Duality in the Mechanism of Hexagonal ZnO/CuxO Nanowires Inducing Sulfamethazine Degradation under Solar or Visible Light

Emerging technologies for the removal of pesticides from contaminated soils and their reuse in agriculture

Pesticides are becoming more prevalent in agriculture to protect crops and increase crop yields. However, nearly all pesticides used for this purpose reach non-target crops and remain as residues for extended periods. Contamination of soil by widespread pesticide use, as well as its toxicity to humans and other living organisms, is a global concern. This has prompted us to find solutions and develop alternative remediation technologies for sustainable management. This article reviews recent technological developments for remediating pesticides from contaminated soil, focusing on the following major points: (1) The application of various pesticide types and their properties, the sources of pesticides related to soil pollution, their transport and distribution, their fate, the impact on soil and human health, and the extrinsic and intrinsic factors that affect the remediation process are the main points of focus. (2) Sustainable pesticide degradation mechanisms and various emerging nano- and bioelectrochemical soil remediation technologies. (3) The feasible and long-term sustainable research and development approaches that are required for on-site pesticide removal from soils, as well as prospects for applying them directly in agricultural fields. In this critical analysis, we found that bioremediation technology has the potential for up to 90% pesticide removal from the soil. The complete removal of pesticides through a single biological treatment approach is still a challenging task; however, the combination of electrochemical oxidation and bioelectrochemical system approaches can achieve the complete removal of pesticides from soil. Further research is required to remove pesticides directly from soils in agricultural fields on a large-scale.

ZnO-based Cu metal-organic framework (MOF) nanocomposite for boosting and tuning the photocatalytic degradation performance

Although metal-organic frameworks (MOFs) are a viable choice for photocatalysts with large surface area and tunable pore structure, the rapid recombination of excited photogenerated charges results in low activity towards photodegradation. Aiming at improving the photocatalytic activities of MOFs, different strategies to incorporate MOF with light-harvesting semiconductors have been developed. In this research, we report an effective photocatalyst designed by incorporating Cu-MOF with ZnO for the photocatalytic degradation of Rose Bengal exhibiting excellent degradation efficiency of 97.4% in 45 min under natural sunlight with catalyst dosage of 320 mg/L. The optical, morphology and surface characteristics of the prepared nanocomposite were studied using scanning electron microscopy (SEM-EDX), high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET) analysis, thermogravimetric (TGA) analysis, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and ultraviolet diffused reflectance spectroscopy (UV-DRS) techniques. Further studies showed that the degradation followed first-order kinetics with a rate constant of 0.077869 min-1. The degradation mechanism was investigated by photoluminescence (PL) study, XPS, zeta potential and quenching experiment in presence of different scavengers. Meanwhile, the fabricated composite displayed good recovery and reuse properties up to 5 cycles as revealed by XRD analysis proving itself a potential MOF-based photocatalyst towards environmental remediation process.

Coupling ZnO with CuO for efficient organic pollutant removal

Fabrication of heterojunction semiconductors for the photodegradation of toxic organic dyes under sunlight exposure has earned significant recognition from researchers nowadays. On that account, we have synthesized and explored a comparative photodegradation study of ZnO/CuO nanocomposite with ZnO and CuO nanoparticles. ZnO and CuO nanoparticles have been synthesized by biosynthesis methods using Ficus benghalensis leaf extract. As-synthesized ZnO and CuO nanoparticles have been further utilized for the synthesis of ZnO/CuO nanocomposite by the mortar pestle crushing/milling method. Both biosynthesis methods and mortar pestle crushing/milling methods are simple, low-cost, and environmentally friendly. Structural, optical, and morphological analysis of all the synthesized nanomaterials have been done by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), fourier transform infrared spectroscopy (FTIR), and UV-visible spectroscopy. PXRD data reveal that synthesized ZnO nanoparticles are in the hexagonal wurtzite phase, CuO nanoparticles in the monoclinic phase, and ZnO/CuO nanocomposite in the hexagonal wurtzite as well as in monoclinic phase. FE-SEM and TEM images of ZnO/CuO nanocomposite reveal the nanorod-shaped morphology along with micro-sized and nano-sized flakes. The BET analysis shows the surface areas 18.128 m²/g for ZnO nanoparticles, 16.653 m²/g for CuO nanoparticles, and 19.580 m²/g for ZnO/CuO nanocomposite, respectively. The energy band gap values of ZnO/CuO nanocomposite are obtained 3.13 eV for ZnO and 2.76 eV for CuO, respectively. The photocatalytic behaviors of all the synthesized nanomaterials are examined against aqueous dye solutions of methylene blue (MB), rhodamine B (RhB), and methyl orange (MO) under sunlight irradiation. The results reveal that the photocatalytic degradation efficiency of ZnO/CuO nanocomposite has been found higher than with ZnO and CuO nanoparticles for all the dyes. Also, all the synthesized nanomaterials indicate higher photocatalytic degradation efficiency for methylene blue dye among all three dyes. The kinetics of photodegradation of all the dye solutions has also been investigated in the presence of ZnO, CuO, and ZnO/CuO photocatalysts separately. The results exhibit that rate constant values for all the dyes are higher with ZnO/CuO nanocomposite than with ZnO and CuO nanoparticles. ZnO/CuO nanocomposite demonstrates degradation efficiency for MB dye 99.13%, for RhB 80.21%, and for MO 67.22% after 180 min of sunlight exposure. ZnO/CuO nanocomposite and ZnO and CuO nanoparticles also show the best reusability and stability up to three cycles for photocatalytic degradation of MB dyes among all the dyes. Therefore, green synthesized ZnO/CuO nanocomposite could be used as an efficient photocatalyst for the degradation of various toxic dyes. The mineralization of different dyes using ZnO/CuO nanocomposite has been examined by FTIR analysis. Furthermore, the mineralization of MB dye has been done by total organic carbon (TOC) measurements.

Photocatalytic degradation of Reactive Black dye using ZnO-CeO2 nanocomposites

This study presents the photocatalytic efficiency of ZnO-CeO₂ nanocomposites for the degradation of a model Reactive Black (RB) dye. Nano-CeO₂ was synthesized using cerium nitrate precursor solution via chemical precipitation. Synthesized nano-CeO₂ was mixed with ZnO nanoparticles in different mass ratios to obtain ZnO-CeO₂ heterojunction photocatalyst. The morphology of the nanocomposites was examined using transmission electron microscope (TEM). X-ray diffraction patterns of the CeO₂ corresponded well with (1 1 1) plane of cubic-phase CeO₂. The band gap of the ZnO-CeO₂ nanocatalyst synthesized was determined to be 3.08 eV, which was lower than that of the pristine CeO₂ and ZnO powders, respectively. The results indicate that 1:1 wt. ratio ZnO-CeO₂ nanocomposite provides about 85% RB degradation within 90 min under UV light under alkaline pH conditions. Degradation rate of RB dye achieved with ZnO-CeO₂ nanocomposite was almost 1.5 times greater than that obtained with pristine ZnO. Increasing CeO₂ ratio beyond 1:1 wt. ratio did not significantly increase RB degradation. The results demonstrate that addition of CeO₂ to ZnO results in lowering its band gap energy and aids charge carrier separation resulting in enhanced oxidation of RB dye under UV light.

Preliminary study of the photodegradation of dyes using amorphous films of ZnO-CuO obtained by photochemical deposition in solid phase

Here, we propose an original method of photochemical deposition for the synthesis of metal oxides from coordination complexes sensitive to UV light. The method consists of the synthesis of zinc oxide amorphous films doped with different concentrations of copper oxide followed by annealing at 600 °C. The photo-reactivity of the samples was evaluated by the decrease of the FT-IR spectroscopy bands. The films were analyzed by scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD) to study their morphology and structures, respectively. The results show an amorphous characteristic in the photo-deposits. The optical properties show a gradual decrease of both the optical band gap and the luminescent emissions of the ZnO photo-deposits when CuO doping increases. Both properties allow a shift in absorption towards the visible and a decrease in the rate of recombination of charge carriers. The photocatalytic activity was analyzed using methyl orange and methylene blue as pollutants under a lamp that emulates solar energy. The results show that the photocatalytic activity is favored by the insertion of CuO; 46.6 and 93.0% efficiency in the photodegradation of methyl orange and methylene blue, respectively, were reached at 1.0 mol % of CuO with respect to pure ZnO. These differences in degradation efficiency respond to the chemical stability of the dyes. Finally, the use of appropriate scavengers suggests an oxidative route in the dye degradation mechanism.

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

Synthesis of nZnO from waste batteries by hydrometallurgical method for photocatalytic degradation of organic pollutants under visible light irradiation

Waste zinc carbon (Zn-C) batteries are generated worldwide in a large amount. They are non-rechargeable and costly to recycle. Therefore, they end up in the landfills where they create hazards for humans and for environment as well. Zn-C batteries are rich in concentration of different heavy metals so they can be subjected for the recovery of metals for the development of valuable new materials. In this study authors have proposed an easy hydrometallurgical method for the recovery of zinc from waste Zn-C batteries to synthesize nano zinc oxide (nZnO) photocatalyst. The prepared nZnO particles were irregular in shape, highly crystalline in nature with crystallite size 23.94 nm. The band gap of the photocatalyst was 3.1 eV. The photocatalytic activity of the synthesised nZnO was tested for the degradation of three organic pollutants namely; phenol, p-nitrophenol (PNP) and crystal violet dye (CV) in an aqueous solution under visible light irradiation. nZnO showed a good catalytic efficiency for the degradation of all the three pollutants, however, the crystal violet (CV) removal was best in comparison with the other pollutants, it was minimally effected by the increase in CV concentration. The maximum degradation of phenol, PNP and CV was found to be 95.03 ± 0.2%, 88.63 ± 0.1% and 97.87 ± 0.4%, respectively. The degradation data was fitted best with pseudo-first-order kinetic model. The photocatalyst was recyclable and its regeneration ability was higher for initial three cycles. The intermediate compounds formed in the process of degradation were determined by liquid chromatography and mass spectroscopy (LC-MS) analysis.

Synthesis, characterization of novel ZnO/CuO nanoparticles, and the applications in photocatalytic performance for rhodamine B dye degradation

Photocatalytic deg radation of environmental pollutants is being up to date for the treatment of contaminated water. In the present study, ZnO/CuO nanomaterials were successfully fabricated by a simple sol-gel method and investigate the photo-degradation of rhodamine B (RhB). The synthesized ZnO/CuO nanoparticles were characterized by X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-Vis diffuse reflectance spectroscopy (UV-Vis-DRS), thermal analysis (TGA), surface charge, and Fourier transform infrared spectroscopy (FTIR). The photo-degradation of the dye RhB was followed spectroscopically. The overall composition of ZnO/CuO material was found to be wurtzite phase, with particle size of 30 nm, and the Vis light absorption increased with an increase of Cu content. The ZnO/CuO nanomaterials were highly active leading to a photo-degradation of 10 ppm RhB reaching 98% within 180 min at 0.1 g/L catalyst dosage. The change in surface charge after degradation evaluated by ζ potential measurements and the differences in functional vibration group monitored by Fourier transform infrared spectroscopy (FTIR) indicates that the RhB adsorption on the Zn45Cu surface was insignificant. And scavenging experiments demonstrate that the RhB degradation by ZnO/CuO nanomaterials involves to some degree hydroxyl radicals.

Enhanced photocatalytic activity of Cu2O for visible light-driven dye degradation by carbon quantum dots

Cuprous oxide (Cu₂O), a p-type semiconductor material, plays an important role in photocatalysis, which has narrower band gap (~2.1 eV), abundant availability, and low toxicity. However, the applications of Cu₂O are mainly restricted by its high recombination rate and low charge collection. Hence, it is of great significance to find an efficient method to improve the photocatalytic activity of Cu₂O. In this work, the CQDs-loaded Cu₂O nanocomposites (CQDs/Cu₂O) were successfully obtained via hydrothermal method. It was worth noting that the CQDs/Cu₂O nanocomposite displayed improved photocatalytic activity compared to that of pure Cu₂O with a lower dosage (25 mg) under visible light, which could completely degrade the methylene blue in 8 min. The recycling experiments also showed that the photocatalytic activity still remained up to 90% after 8 cycles. In addition to the photodegradation of methylene blue, the CQDs/Cu₂O nanocomposite also had an excellent antibacterial activity against Escherichia coli (100%, 30 min). These results demonstrated that introducing CQDs to Cu₂O was a feasible method to improve the photocatalytic performance of Cu₂O.

Recent advances in photocatalytic remediation of emerging organic pollutants using semiconducting metal oxides: an overview

Many untreated and partly treated wastewater from the home and commercial resources is being discharged into the aquatic environment these days, which contains numerous unknown and complex natural and inorganic compounds. These compounds tend to persist, initiating severe environmental problems, which affect human health. Conventionally, physicochemical treatment methods were adopted to remove such complex organic chemicals, but they suffer from critical limitations. Over time, photocatalysis, an advanced oxidation process, has gained its position for its efficient and fair performance against emerging organic pollutant decontamination. Typically, photocatalysis is a green technology to decompose organics under UV/visible light at ambient conditions. Semiconducting nanometal oxides have emerged as pioneering photocatalysts because of large active surface sites, flexible oxidation states, various morphologies, and easy preparation. The current review presents an overview of emerging organic pollutants and their effects, advanced oxidation processes, photocatalytic mechanism, types of photocatalysts, photocatalyst support materials, and methods for improving photodegradation efficiency on the degradation of complex emerging organic pollutants. In addition, the recent reports of metal-oxide-driven photocatalytic remediation of emerging organic pollutants are presented in brief. This review is anticipated to reach a broader scientific community to understand the first principles of photocatalysis and review the recent advancements in this field.

Reduced graphene oxide modified Z-scheme AgI/Bi2MoO6 heterojunctions with boosted photocatalytic activity for water treatment originated from the efficient charge pairs partition and migration

In order to enhance degradation of harmful organic pollutants like Rhodamine B (RhB) dye under visible-light irradiation (λ >420 nm), a silver iodide/reduced graphene oxide/bismuth molybdate (AgI/rGO/Bi2MoO6) Z-scheme heterojunction photocatalyst was synthesized by a solvothermal process combined with an in-situ precipitation technique. The AgI (15 wt.%)/rGO/Bi2MoO6 (AGBMO-15) photocatalyst with a dosage of 0.5 g/L exhibited the highest photocatalytic activity with 98.0% RhB removal under an initial concentration of 10 mg/L within 30 min. This removal rate was approximately 65.8%, 57.7%, and 72.7% higher than that for a rGO/Bi2MoO6 (GBMO) binary composite, pure AgI powder, and pristine Bi2MoO6 nanoplates, respectively. The novel photocatalyst achieved approximately three times higher photocatalytic degradation within a shorter period of visible-light irradiation than pure Bi2MoO6. Through photoluminescence analysis and trapping experiments, this outstanding performance was attributed to the efficient separation of photogenerated electron-hole pairs owing to an internal electric field at the contact interface of AgI and Bi2MoO6, which generated more superoxide radical anions (•O2-) as primary reactive species to promote RhB degradation. Meanwhile, the rGO participated in the capture of visible-light and played a role of solid electronic medium at the AgI/Bi2MoO6 interface, which realized an effective Z-scheme electron transfer path, avoided the self oxidation of photocatalyst and prolonged the carrier life. Furthermore, the AGBMO-15 photocatalyst exhibited excellent photocatalytic degradation stability, maintaining an RhB removal rate of 96.2% after four cycles of reuse. Due to its simplicity, reusability, and controllability, the proposed photocatalyst has excellent application potential for the environmental remediation of wastewater.

CuO-ZnO-CdWO4: a sustainable and environmentally benign photocatalytic system for water cleansing

Currently, there is a major problem of water contaminations, especially of dyes, all over the world. A new technique is being developed daily for the treatment of contaminated water. In many ways, a photocatalytic degradation of a dye by a mixed metal oxide photocatalyst is counted as the best technique for water treatment. This paper also addresses the preparation and photocatalytic application of newly developed mixed metal oxide nanocomposite, CuO-ZnO-CdWO₄. A novel mixed metal oxide CuO-ZnO-CdWO₄ nanocomposite has been synthesized by a green route using Brassica Rapa leaves extract. The application of CuO-ZnO-CdWO₄ as a photocatalyst in wastewater treatment has been thoroughly discussed. Several spectroscopic and microscopic techniques were used to characterize the prepared nanocomposite. The photocatalytic activity of CuO-ZnO-CdWO₄ nanocomposite with a band gap of 3.13 eV was observed under the artificial visible light and sunlight for the degradation of Congo red dye. The results under sunlight show the 1.45 times greater removal efficiency than under the artificial visible light. Pseudo-first-order, diffusion, and Singh kinetics models were used to describe the kinetics of dye degradation. Pseudo-first-order model was found to be best fitted model for present study. The performance of CuO-ZnO-CdWO₄ was estimated by significant parameters such as quantum yield, figure of merit, turnover number, and mean turnover frequency. The value these parameters were calculated as 1.70 × 10^-8 molecules photon^-1, 1.77 × 10^-4, 2.98 × 10⁸ s^-1, and 3.31 × 10^-4 s^-1, respectively. These parameters revealed high potential of CuO-ZnO-CdWO₄ for Congo red dye degradation.

Visible light photodegradation of organic dyes using electrochemically synthesized MoO3/ZnO

In this study, flake-like MoO₃-ZnO composite was prepared using a simple and robust electrochemical setup. The composite was characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, elemental analysis, X-ray photoelectron spectroscopy, thermogravimetric analysis, photoluminescence, zeta potential analysis, and electrochemical impedance study. The modified ZnO shows a remarkable catalytic activity towards the photodegradation of three potentially hazardous dyes, malachite green, crystal violet, and methylene blue. More than 95% of both malachite green and crystal violet degraded within 140 min under visible light irradiation. Scavenger studies reveal that OH· radicals produced by the photo-separated charges on MoO₃-ZnO are responsible for the degradation of all three dyes. The photoactive charge carriers show less recombination rate as evidenced by the photoluminescence spectrum due to the interparticle charge migration process. This work suggests a new versatile procedure for the synthesis of MoO₃-ZnO composites and establishes its photocatalytic efficacy under visible light with three common pollutant dyes found in wastewater.

Photocatalytic oxidation of cationic dyes in single and binary solutions in presence of Zn-Cd oxides obtained from calcined LDH

In the present paper, zinc and cadmium layered double hydroxides (ZnCd-LDH) have been prepared through co-precipitation route then calcined at different temperatures. Their photocatalytic activity was determined by photodegradation of industriel toxic dyes (rhodamine B (RB) and crystal violet (CV)) in single and binary solutions illuminated with UVA or sunlight irradiation. It was found that the highest photodiscoloration efficiency was obtained for the nanomaterial heated at 700 °C (ZnCd-700). The physicochemical properties of ZnCd-LDH and ZnCd-700 were determined by PXRD, FTIR, DSC, TG/DTG, and DRS-UV-Vis. By heating the ZnCd-LDH material, some demixtion to ZnO and CdO phases occurred, corresponding to a band gap energy value of 2.93 eV for the formed zinc oxide nanoparticles. The results revealed that with 1 g·L^-1 of ZnCd-700 dose, the photodiscoloration of dyes was enhanced significantly where in single solution, it was > 83.9% and ≥ 98.0% in 90 min of UVA ilumination and sunlight, respectively. Whereas, the removal of CV and RB was > 89.7% and ≥ 98.7% in binary solution under UVA and solar irradiations, respectively. The superoxide anion radical (O₂^•-) was identified as the most influential reactive species for dyes degradation. In binary solution, the CV dye was photodiscolored faster than RB while in single solution, the result was the opposite. The re-use study of ZnCd-700 as photocatalyst showed a slight decrease of dyes discoloration varying between 1.4 and 7.1% from the second to the fourth use.

Degradation of synthetic dyes using nanoparticles: a mini-review

The industrial revolution has marked a strong impact on financial upgradation of several countries, and increase in the industrial establishment globally has direct impact on environment because of the release of unwanted product in air and inside the water bodies. The use of dyes has increased tremendously in various industries ranging from food, leather, textile, paper, cosmetic, pharmaceuticals, etc. The problem has emerged due to disposing of the dyes in the open environment, and mostly it is disposed along with the industrial wastes into the water bodies, which becomes harmful for animals, aquatic life and human health. This review highlights the role of the nanoparticles particularly biosynthesized nanoparticles for eliminating the dyes from the industrial wastewater. There are several methods for the synthesis of nanoparticle including physical, chemical and green synthesis of nanoparticles commonly known as biological method. Among all, the biological method is considered as the rapid, easy, eco-friendly and is being performed at mild conditions. The uses of nanoparticles for removal of dyes from water minimize the hazardous impact and thus considered to be the best approach as far as water quality and safety of environment is concerned.

Sunlight-induced photocatalytic degradation of various dyes and bacterial inactivation using CuO-MgO-ZnO nanocomposite

Novel tri-phase CuO-MgO-ZnO nanocomposite was prepared using the co-precipitation technique and investigated its physical properties using characterization techniques including XRD, FTIR, Raman, IV, UV-vis, PL, and SEM. The application of grown CuO-MgO-ZnO nanocomposite for the degradation of various dyes under sunlight and antibacterial activity against different bacteria were studied. The XRD confirmed the existence of diffraction peaks related to CuO (monoclinic), MgO (cubic), and ZnO (hexagonal) with CuO phase 40%, MgO 24%, and ZnO 36%. The optical energy gap of nanocomposite was 2.9 eV, which made it an efficient catalyst under sunlight. Raman and FTIR spectra have further confirmed the formation of the nanocomposite. SEM images revealed agglomerated rod-shaped morphology. EDX results showed the atomic percentage of a constituent element in this order Cu>Zn>Mg. PL results demonstrate the presence of intrinsic defects. The photocatalytic activity against methylene blue (MB), methyl orange (MO), rhodamine-B (RhB), cresol red (CR), and P-nitroaniline (P-Nitro) dyes has shown the excellent degradation efficiencies 88.5%, 93.5%, 75.9%, 98.8%, and 98.6% at 5 ppm dye concentration and 82.6%, 83.6%, 64.3%, 93.1%, and 94.3% at 10 ppm dye concentration in 100 min, respectively, under sunlight illumination. The higher degradation is due to the generation of superoxide and hydroxyl radicals. The recyclability test showed the reusability of catalyst up to the 5th cycle. The antibacterial activity against Escherichia coli, Klebsiella pneumoniae, Proteus Vulgaris, Staphylococcus aureus, and Pseudomonas aeruginosa bacteria with the zone of inhibition 30, 31, 30, 30, and 30 mm, respectively, was achieved.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

WO3 nanoplates decorated with polyaniline and CdS nanoparticles as a new photocatalyst for degradation of imidacloprid pesticide from water

This study focused on the photocatalytic degradation of imidacloprid (IM) in water as the model pesticides. The effective division of photogenerated charge carriers is important in the photocatalytic reactions. So, a new PANI/WO₃-CdS photocatalyst was synthesized by a simple method. The prepared PANI/WO₃-CdS nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy compatible with energy dispersive spectroscopy (FESEM-EDS), and X-ray diffraction (XRD). Degradation of IM pesticide under visible light irradiation was carried out to investigate the photocatalytic efficiency of the prepared nanocomposite. The effect of operational parameters on the degradation performance of pesticides was studied by response surface methodology (RSM). The optimum conditions for photocatalytic degradation of IM (94.7%) were found to be 10 ppm of IM, 150 mg of PANI/WO₃-CdS, and pH = 3.0. The apparent rate constant of IM photodegradation over PANI/WO₃-CdS was 0.016 min^-1. According to results, PANI/WO₃-CdS can serve as an efficient, and recyclable photocatalyst for imidacloprid degradation in an aqueous media.

Magnetic ZnO Crystal Nanoparticle Growth on Reduced Graphene Oxide for Enhanced Photocatalytic Performance under Visible Light Irradiation

Magnetite zinc oxide (MZ) (Fe₃O₄/ZnO) with different ratios of reduced graphene oxide (rGO) was synthesized using the solid-state method. The structural and optical properties of the nanocomposites were analyzed using transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis/DRS), and photoluminescence (PL) spectrophotometry. In particular, the analyses show higher photocatalytic movement for crystalline nanocomposite (MZG) than MZ and ZnO nanoparticles. The photocatalytic degradation of methylene blue (MB) with crystalline ZnO for 1.5 h under visible light was 12%. By contrast, the photocatalytic activity for MZG was more than 98.5%. The superior photocatalytic activity of the crystalline nanocomposite was detected to be due to the synergistic effect between magnetite and zinc oxide in the presence of reduced graphene oxide. Moreover, the fabricated nanocomposite had high electron-hole stability. The crystalline nanocomposite was stable when the material was used several times.

Enhanced photocatalytic degradation of tetracycline by constructing a controllable Cu2O–TiO2 heterojunction with specific crystal facets

Type II heterojunction of 100Cu2O–TiO2 exhibits enhanced photodegradation rate of TC at the sacrifice of absolute decomposition, while 111Cu2O–TiO2 Z-scheme heterojunction displays simultaneous increased degradation rate and profound decomposition.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.