The Impact of Simple Phenolic Compounds on Beer Aroma and Flavor

Refermentation and maturation of lambic beer in bottles: a necessary step for gueuze production

The production of gueuze beers through refermentation and maturation of blends of lambic beer in bottles is a way for lambic brewers to cope with the variability among different lambic beer batches. The resulting gueuze beers are more carbonated than lambic beers and are supposed to possess a unique flavor profile that varies over time. To map this refermentation and maturation process for gueuze production, a blend of lambic beers was made and bottled, whereby one of them was produced with the old wheat landrace Zeeuwse Witte. Through the use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and high-throughput sequencing of bacterial and fungal amplicons, in combination with metabolite target analysis, new insights into gueuze production were obtained. During the initial stages of refermentation, the conditions in the bottles were similar to those encountered during the maturation phase of lambic beer productions in wooden barrels, which was also reflected microbiologically (presence of Brettanomyces species, Pediococcus damnosus, and Acetobacter lambici) and biochemically (ethanol, higher alcohols, lactic acid, acetic acid, volatile phenolic compounds, and ethyl esters). However, after a few weeks of maturation, a switch from a favorable environment to one with nutrient and dissolved oxygen depletion resulted in several changes. Concerning the microbiology, a sequential prevalence of three lactic acid bacterial species occurred, namely, P. damnosus, Lentilactobacillus buchneri, and Lactobacillus acetotolerans, while the diversity of the yeasts decreased. Concerning the metabolites produced, mainly those of the Brettanomyces yeasts determined the metabolic profiles encountered during later stages of the gueuze production.IMPORTANCEGueuze beers are the result of a refermentation and maturation process of a blend of lambic beers carried out in bottles. These gueuze beers are known to have a long shelf life, and their quality typically varies over time. However, knowledge about gueuze production in bottles is scarce. The present study provided more insights into the varying microbial and metabolite composition of gueuze beers during the first 2 years of this refermentation and maturation process. This will allow gueuze producers to gain more information about the influence of the refermentation and maturation time on their beers. These insights can also be used by gueuze producers to better inform their customers about the quality of young and old gueuze beers.

Surface-displayed phenolic acid decarboxylase for increased vinylphenolic pyranoanthocyanins in blueberry wine

During the fruit wine production, phenolic acid decarboxylase (PAD) converts free hydroxycinnamic acid into 4-vinyl derivatives that can then react spontaneously with anthocyanins, generating more stable pyranoanthocyanins that are responsible for the color stability of fruit wine. Nevertheless, the low PAD activity in yeast under the winemaking conditions has largely limited the generation of 4-vinyl derivatives. To bridge this gap, we expressed PAD from Bacillus amyloliquefaciens in Pichia pastoris and surface-displayed it on Saccharomyces cerevisiae. As a result, S. cerevisiae surface-displayed PAD (SDPAD) exhibited an enhanced thermal stability and tolerance to acidic conditions. Fermentation experiments showed that SDPAD can significantly increase the content of vinylphenolic pyranoanthocyanins and thus maintain the color stability of blueberry wine. Our study demonstrated the feasibility of surface display technology for color stability enhancement during the production of blueberry wine, providing a new and effective solution to increase the content of vinylphenolic pyranoanthocyanins in the fruit-based wines.

The marula and elephant intoxication myth: assessing the biodiversity of fermenting yeasts associated with marula fruits (Sclerocarya birrea)

The inebriation of wild African elephants from eating the ripened and rotting fruit of the marula tree is a persistent myth in Southern Africa. However, the yeasts responsible for alcoholic fermentation to intoxicate the elephants remain poorly documented. In this study, we considered Botswana, a country with the world's largest population of wild elephants, and where the marula tree is indigenous, abundant and protected, to assess the occurrence and biodiversity of yeasts with a potential to ferment and subsequently inebriate the wild elephants. We collected marula fruits from over a stretch of 800 km in Botswana and isolated 106 yeast strains representing 24 yeast species. Over 93% of these isolates, typically known to ferment simple sugars and produce ethanol comprising of high ethanol producers belonging to Saccharomyces, Brettanomyces, and Pichia, and intermediate ethanol producers Wickerhamomyces, Zygotorulaspora, Candida, Hanseniaspora, and Kluyveromyces. Fermentation of marula juice revealed convincing fermentative and aromatic bouquet credentials to suggest the potential to influence foraging behaviour and inebriate elephants in nature. There is insufficient evidence to refute the aforementioned myth. This work serves as the first work towards understanding the biodiversity marula associated yeasts to debunk the myth or approve the facts.

Thermal stabilisation of cocoa fruit pulp - Effects on sensory properties, colour and microbiological stability

To improve cocoa pulp's shelf-life, preservation processes are necessary while maintaining the quality of the pulp. We applied pasteurisation and UHT-treatment and investigated different quality parameters: dry matter content, water activity, total soluble solids, colour and peroxidase activity. Both technologies inactivated peroxidase successfully. The colour of the pasteurised pulp was similar to the fresh, while UHT-treated pulp was more brownish. The sensory properties were investigated in detail by descriptive analysis and the identification of aroma-active volatile organic compounds. Fresh pulp revealed the highest aroma intensity for attribute unripe banana-like, whereas UHT-treated pulp scored highest in the intensity of attribute tropical fruit-like. Pasteurised pulp showed strong similarities to the fresh pulp. Fresh cocoa pulp exhibited 74 aroma-active regions identified by GC-MS/O. UHT-treated and pasteurised pulp accounted for 66 and 60 aroma-active regions, respectively. Five identified substances were only found in the fresh and pasteurised pulp, namely: δ-carene, 1-pentanol, 3-(methylthio)propanol, phenol and δ-undecalactone. Similarly, fresh and UHT-treated pulp shared ten exclusive odorants, such as decanal, geraniol, and δ-nonalactone. The pasteurised and UHT-treated pulp shared two compounds, δ-decalactone and 5-(hydroxymethyl)furfural. Furthermore, the thermally treated pulps could be stored at 4 °C and 23 °C for 24 weeks without observing a significant growth of microorganisms. The rate of non-enzymatic browning was higher in samples stored at 23 °C compared to those stored at 4 °C, leading to higher browning indices. We demonstrated that pasteurisation and ultra-high temperature treatment are suitable technologies for the stabilisation of cocoa fruit pulp. These resulted in prolonged shelf-lifes and minimal changes in the sensory prorperties of the treated pulps, characterised by a reduction in the aroma diversities. This work provides important insights for the thermal stabilisation of further side-streams.

Study of a First Approach to the Controlled Fermentation for Lambic Beer Production

Non-Saccharomyces yeasts represent a great source of biodiversity for the production of new beer styles, since they can be used in different industrial areas, as pure culture starters, in co-fermentation with Saccharomyces, and in spontaneous fermentation (lambic and gueuze production, with the main contribution of Brettanomyces yeast). The fermentation process of lambic beer is characterized by different phases with a characteristic predominance of different microorganisms in each of them. As it is a spontaneous process, fermentation usually lasts from 10 months to 3 years. In this work, an attempt was made to perform a fermentation similar to the one that occurred in this process with lactic bacteria, Saccharomyces yeast and Brettanomyces yeast, but controlling their inoculation and therefore decreasing the time necessary for their action. For this purpose, after the first screening in 100 mL where eight Brettanomyces yeast strains from D.O. "Ribeira Sacra" (Galicia) were tested, one Brettanomyces bruxellensis strain was finally selected (B6) for fermentation in 1 L together with commercial strains of Saccharomyces cerevisiae S-04 yeast and Lactobacillus brevis lactic acid bacteria in different sequences. The combinations that showed the best fermentative capacity were tested in 14 L. Volatile compounds, lactic acid, acetic acid, colour, bitterness, residual sugars, ethanol, melatonin and antioxidant capacity were analysed at different maturation times of 1, 2, 6 and 12 months. Beers inoculated with Brettanomyces yeast independently of the other microorganisms showed pronounced aromas characteristic of the Brettanomyces yeast. Maturation after 12 months showed balanced beers with "Brett" aromas, as well as an increase in the antioxidant capacity of the beers.

Changes in the chemical compositions and biological properties of kombucha beverages made from black teas and pineapple peels and cores

Several raw materials have been used as partial supplements or entire replacements for the main ingredients of kombucha to improve the biological properties of the resulting kombucha beverage. This study used pineapple peels and cores (PPC), byproducts of pineapple processing, as alternative raw materials instead of sugar for kombucha production. Kombuchas were produced from fusions of black tea and PPC at different ratios, and their chemical profiles and biological properties, including antioxidant and antimicrobial activities, were determined and compared with the control kombucha without PPC supplementation. The results showed that PPC contained high amounts of beneficial substances, including sugars, polyphenols, organic acids, vitamins, and minerals. An analysis of the microbial community in a kombucha SCOBY (Symbiotic Cultures of Bacteria and Yeasts) using next-generation sequencing revealed that Acetobacter and Komagataeibacter were the most predominant acetic acid bacteria. Furthermore, Dekkera and Bacillus were also the prominent yeast and bacteria in the kombucha SCOBY. A comparative analysis was performed for kombucha products fermented using black tea and a fusion of black tea and PPC, and the results revealed that the kombucha made from the black tea and PPC infusion exhibited a higher total phenolic content and antioxidant activity than the control kombucha. The antimicrobial properties of the kombucha products made from black tea and the PPC infusion were also greater than those of the control. Several volatile compounds that contributed to the flavor, aroma, and beneficial health properties, such as esters, carboxylic acids, phenols, alcohols, aldehydes, and ketones, were detected in kombucha products made from a fusion of black tea and PPC. This study shows that PPC exhibits high potential as a supplement to the raw material infusion used with black tea for functional kombucha production.

Yeast Strain Influences the Hop-Derived Sensory Properties and Volatile Composition of Beer

The perception of hop-derived flavour in beer is not well understood, particularly regarding the effect that different yeast strains and fermentation parameters have on perceived hop aroma and the mechanisms responsible for these changes. To evaluate the influence of yeast strain on the sensory properties and volatile composition of beer, a standard wort, late-hopped with New Zealand Motueka hops (5 g·L^-1), was fermented with one of twelve yeast strains under constant conditions (temperature and yeast inoculation rate). The bottled beers were evaluated using a free sorting sensory methodology, and their volatile organic compounds (VOC) were assessed using gas chromatography mass spectrometry (GC/MS) with headspace solid-phase microextraction (SPME) sampling. Beer fermented with SafLager W-34/70 yeast was associated with a hoppy flavour attribute, whereas WY1272 and OTA79 beers were sulfury, and WY1272 was also metallic. WB06 and WLP730 beers were perceived to be spicy, with WB06 beer also perceived as estery, whereas VIN13 beer was sour, and the WLP001 beer was astringent. Beers fermented using the twelve yeast strains had clearly distinct VOC profiles. Beer made with WLP730, OTA29, SPH, and WB06 yeasts had the highest 4-vinylguaiacol levels, which contributed to their spicy attribute. Beer made with W3470 had high levels of nerol, geraniol, and citronellol, which supported its sensory characterisation as being 'hoppy'. This research has illustrated the important role that yeast strain has on modulating hop flavour in beer.

Characterisation of Korean rice wine (makgeolli) prepared by different processing methods

Four methods of preparing makgeolli, a traditional Korean turbid rice wine, were reported in this study. The four processing routes include single-stage simultaneous saccharification and fermentation of glutinous rice with nuruk - a Korean starter culture (1SF-N), single-stage fermentation with nuruk and yeast (1SF-YN), two-stage fermentation (2SF) and three-stage fermentation (3SF). Chemical analysis was used to determine how the different processing routes could affect the rice wine's properties in terms of alcohol content, pH, colour, mineral content, proximate composition, antioxidant activity, total phenolic content, sugar, free amino acid, and organic acid profile. Sensory analysis using polarised projective mapping (PPM) and 62 participants found that sweetness is the most desirable attribute for makgeolli among New Zealand consumers with sourness and bitterness as less desirable. The 2SF makgeolli sample had the highest concentration of glucose (8.2 mg/mL) and maltose (107 mg/mL) and in the PPM experiment was the most preferred out of the four processing methods. The 1SF-N makgeolli sample had the highest alcohol (13% ABV), crude protein (4.9%), antioxidant activity, total phenolic (621 mg GAE/L) and free amino acids content, however, it was the least overall liked makgeolli sample. Overall, the novelty of this research includes formulating a traditional Korean turbid rice wine in a Western country environment and evaluating consumer perception of makgeolli beyond the normal clientele in South Korea. From these results it is suggested that the properties of makgeolli can be manipulated via processing to suit the brewer's sensory needs that best fits the consumer market.

FIND-IT: Accelerated trait development for a green evolution

Improved agricultural and industrial production organisms are required to meet the future global food demands and minimize the effects of climate change. A new resource for crop and microbe improvement, designated FIND-IT (Fast Identification of Nucleotide variants by droplet DigITal PCR), provides ultrafast identification and isolation of predetermined, targeted genetic variants in a screening cycle of less than 10 days. Using large-scale sample pooling in combination with droplet digital PCR (ddPCR) greatly increases the size of low-mutation density and screenable variant libraries and the probability of identifying the variant of interest. The method is validated by screening variant libraries totaling 500,000 barley (Hordeum vulgare) individuals and isolating more than 125 targeted barley gene knockout lines and miRNA or promoter variants enabling functional gene analysis. FIND-IT variants are directly applicable to elite breeding pipelines and minimize time-consuming technical steps to accelerate the evolution of germplasm.

Surmounting the off-flavor challenge in plant-based foods

Plant-based food products have been receiving an astronomical amount of attention recently, and their demand will most likely soar in the future. However, their unpleasant, intrinsic flavor and odor are the major obstacles limiting consumer's acceptance. These off-flavors are often described as "green," "grassy," "beany," "fatty" and "bitter." This review highlights the presence and formation of common off-flavor volatiles (aldehydes, alcohols, ketones, pyrazines, furans) and nonvolatiles (phenolics, saponins, peptides, alkaloids) from a variety of plant-based foods, including legumes (e.g. lentil, soy, pea), fruits (e.g. apple, grape, watermelon) and vegetables (e.g. carrot, potato, radish). These compounds are formed through various pathways, including lipid oxidation, ethanol fermentation and Maillard reaction (and Strecker degradation). The effect of off-flavor compounds as received by the human taste receptors, along with its possible link of bioactivity (e.g. anti-inflammatory effect), are briefly discussed on a molecular level. Generation of off-flavor compounds in plants is markedly affected by the species, cultivar, geographical location, climate conditions, farming and harvest practices. The effects of genome editing (i.e. CRISPR-Cas9), various processing technologies, such as antioxidant supplementation, enzyme treatment, extrusion, fermentation, pressure application, and different storage and packaging conditions, have been increasingly studied in recent years to mitigate the formation of off-flavors in plant foods. The information presented in this review could be useful for agricultural practitioners, fruits and vegetables industry, and meat and dairy analogue manufacturers to improve the flavor properties of plant-based foods.

Characteristics of New England India Pale Ale Beer Produced with the Use of Norwegian KVEIK Yeast

The aim of this research was to determine the potential of four unconventional Norwegian yeasts of the KVEIK type to produce NEIPA beer. The influence of yeast strains on fermentation process, physicochemical properties, antioxidant potential, volatile compounds, and sensory properties was investigated. The KVEIK-fermented beer did not differ in terms of physicochemical parameters from the beer produced with the commercial variants of US-05 yeast. The yeast strain influenced the sensory quality (taste and aroma) of the beers, with KVEIK-fermented beer rating significantly higher. The antioxidant activity of the tested beers also significantly depended on the yeast strain applied. The beers fermented with KVEIK had a significantly higher antioxidant potential (ABTS^•+) than those fermented with US-05. The strongest antioxidant activity was found in the beer brewed with the Lida KVEIK yeast. The use of KVEIK to produce NEIPA beer allowed enrichment of the finished products with volatile compounds isobutanol, 2-pentanol, 3-methylobutanol, ethyl octanoate, and ethyl decanoate.

Brettanomyces bruxellensis: Overview of the genetic and phenotypic diversity of an anthropized yeast

Human-associated microorganisms are ideal models to study the impact of environmental changes on species evolution and adaptation because of their small genome, short generation time, and their colonization of contrasting and ever-changing ecological niches. The yeast Brettanomyces bruxellensis is a good example of organism facing anthropogenic-driven selective pressures. It is associated with fermentation processes in which it can be considered either as a spoiler (e.g. winemaking, bioethanol production) or as a beneficial microorganism (e.g. production of specific beers, kombucha). Besides its industrial interests, noteworthy parallels and dichotomies with Saccharomyces cerevisiae propelled B. bruxellensis as a valuable complementary yeast model. In this review, we emphasize that the broad genetic and phenotypic diversity of this species is only beginning to be uncovered. Population genomic studies have revealed the co-existence of auto- and allotriploidization events with different evolutionary outcomes. The different diploid, autotriploid and allotriploid subpopulations are associated with specific fermented processes, suggesting independent adaptation events to anthropized environments. Phenotypically, B. bruxellensis is renowned for its ability to metabolize a wide variety of carbon and nitrogen sources, which may explain its ability to colonize already fermented environments showing low-nutrient contents. Several traits of interest could be related to adaptation to human activities (e.g. nitrate metabolization in bioethanol production, resistance to sulphite treatments in winemaking). However, phenotypic traits are insufficiently studied in view of the great genomic diversity of the species. Future work will have to take into account strains of varied substrates, geographical origins as well as displaying different ploidy levels to improve our understanding of an anthropized yeast's phenotypic landscape.

Sour beer production in India using a coculture of Saccharomyces pastorianus and Lactobacillus plantarum: optimization, microbiological, and biochemical profiling

The study's objective was to develop a co-fermentation process with appropriate fermentation parameters to produce a sour beer (similar to a Belgium sour beer) with an ethanol content of 6-8% (v/v) using a coculture of Saccharomyces pastorianus and Lactobacillus plantarum. Statistical optimization was conducted to determine fermentation conditions to produce a sour beer with ~ 3 mg/mL of lactic acid, similar to the traditional sour beer levels. Studies were conducted on the microbial dynamics and volatile compounds produced during this fermentation and aging process. GC-MS studies revealed the generation of novel bioactive compounds as well as the depletion of some volatile compounds during co-fermentation. The study detailed a 5-day co-fermentation process of S. pastorianus and L. plantarum and a 21-day aging process to prepare a sour beer with biochemical properties along the lines of traditional lambic beers. The interrelationship between the two microorganisms and the biochemical changes in the sour beer fermentation process was elucidated and the sensorial attributes have been described.

Fresh Basil Infusion: Effect of Sous-Vide Heat Treatment on Their Volatile Composition Profile, Sensory Profile, and Color

Herbs, including basil, are used to enhance the flavor of food products around the world. Its potential is influenced by the quality of fresh herbs and processing practices, wherein conditions of heat treatment play an important role. The aim of the research was to determine the effect of sous-vide heat treatment on the volatile compounds profile, sensory quality, and color of basil infusions. The material used for research was aqueous basil infusion prepared conventionally at 100 °C, and using the sous-vide method (65, 75, and 85 °C). The composition of volatile compounds was identified by GC/MS analysis, the sensory profile was assessed using a group of trained panelists, while the color was instrumentally assessed in the CIE Lab system. No significant differences were found in the intensity of the taste and aroma of basil infusions at different temperatures. Seventy headspace volatile compounds were identified in the analyzed samples, ten of which exceeded 2% of relative area percentage. The most abundant compounds were eucalyptol (27.1%), trans-ocimene (11.0%), β-linalool (9.2%), and β-myrcene (6.7%). Most of the identified compounds belonged to the terpenes and alcohols groups. Our findings show that the conventional herbal infusion was more like a sous-vide infusion prepared at the lowest temperature SV65, while SV75 and SV85 were similar to each other but different from the conventional. However, a smaller number of volatile compounds in the samples heated at higher temperatures of sous-vide were identified. The sous-vide samples showed a higher content of alkanes. The sous-vide method (p ≤ 0.05) resulted in darker, less green, and less yellow basil leaves than fresh and traditionally steeped ones. Long heat treatment under vacuum at higher temperatures causes a pronounced change in the aroma composition.

Profiling of contemporary beer styles using liquid chromatography quadrupole time-of-flight mass spectrometry, multivariate analysis, and machine learning techniques

Although all beer is brewed using the same four classes of ingredients, contemporary beer styles show wide variation in flavor and color, suggesting differences in their chemical profiles. A selection of 32 beers covering five styles (India pale ale, blonde, stout, wheat, and sour) were investigated to determine chemical features, which discriminate between popular beer styles. The beers were analyzed in an untargeted fashion using liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS). The separation and detection method were tuned to include compounds from important beer components, namely iso-α-acids and phenolic compounds. Due to the sheer number of unknown compounds in beer, multivariate analysis and machine learning techniques were used to pinpoint some of the compounds most influential in distinguishing beer styles. It was determined that while many phenols and iso-α-acids were present in the beers, they were not the compounds most responsible for the variations between styles. However, it was possible to discriminate each beer style using multivariate analysis. Principal component analysis (PCA) was able to separate and cluster the individual beer samples by style. A combination of statistical tools were used to predict formulas for some of the most influential metabolites from each style. Machine learning models accurately classified patterns in the five beer styles, indicating that they can be precisely distinguished by their nonvolatile chemical profile.

Physico-Chemical and Sensory Characterization of a Fruit Beer Obtained with the Addition of Cv. Lambrusco Grapes Must

In 2015, Italian Grape Ale (IGA) beers have been included as a new provisional sub-category of special-type fruit beers by the Beer Judge Certification Program, including those products whose brewing process is carried out in presence of determined quantities of grape must. However, information on the effects of these additions on the composition of final beers are still scarce. This work is hence focused on the chromatic, volatile, phenolic and sensory characterization of IGA beers obtained with the addition of grape musts during brewing process. To this aim, different amounts of must (5, 10 and 20%) from cv. Lambrusco red grapes were added to a lager wort before primary fermentation. Beers were then characterized by HPLC-MS, GC-MS and sensory analysis in order to determine phenolic and aroma compounds along with their sensory attributes. Results confirmed the addition of must from cv. Lambrusco grapes capable to enrich beers in color, acids, phenolic (up to 7-folded increased) and volatile compounds, while giving complexity to beers. These results, which were confirmed by a trained sensory panel, are among the very first insights on the impact of red grape must in brewing, both from a compositional and sensory point of view.

Growth, survival, and metabolic activities of probiotics Lactobacillus rhamnosus GG and Saccharomyces cerevisiae var. boulardii CNCM-I745 in fermented coffee brews

Amidst rising demand for non-dairy probiotic foods, and growing interest in coffees with added functionalities, it would be opportune to ferment coffee brews with probiotics. However, challenges exist in maintaining probiotic viability in high-moisture food products. Here, we aimed to enhance the viability of the probiotic bacteria, Lactobacillus rhamnosus GG, in coffee brews by co-culturing with the probiotic yeast, Saccharomyces cerevisiae var. boulardii CNCM-I745. The yeast significantly enhanced the viability of L. rhamnosus GG, as bacterial populations beyond 7 Log CFU/mL were maintained throughout 14 weeks of storage at 4 and 25 °C. In contrast, the single culture of L. rhamnosus GG suffered viability losses below 6 Log CFU/mL within 10 weeks at 4 °C, and 3 weeks at 25 °C. Growth and survival of S. boulardii CNCM-I745 remained unaffected by the presence of L. rhamnosus GG. Volatile profiles of coffee brews were altered by probiotic metabolic activities, but co-culturing led to suppressed generation of diacetyl and ethanol compared to single cultures. Probiotic fermentation did not alter principal coffee bioactive compounds and antioxidant capacities; however, declines in peroxyl radical scavenging capacities were observed after ambient storage. Overall, we illustrate that yeasts are effective in enhancing probiotic bacterial viability in coffee brews, which may be useful in developing shelf stable probiotic food products.

The Role of Bioactive Phenolic Compounds on the Impact of Beer on Health

This review reports recent knowledge on the role of ingredients (barley, hop and yeasts), including genetic factors, on the final yield of phenolic compounds in beer, and how these molecules generally affect resulting beer attributes, focusing mainly on new attempts at the enrichment of beer phenols, with fruits or cereals other than barley. An entire section is dedicated to health-related effects, analyzing the degree up to which studies, investigating phenols-related health effects of beer, have appropriately considered the contribution of alcohol (pure or spirits) intake. For such purpose, we searched Scopus.com for any kind of experimental model (in vitro, animal, human observational or intervention) using beer and considering phenols. Overall, data reported so far support the existence of the somehow additive or synergistic effects of phenols and ethanol present in beer. However, findings are inconclusive and thus deserve further animal and human studies.

Understanding the sensory and physicochemical differences between commercially produced non-alcoholic lagers, and their influence on consumer liking

•

Variation in sensory and physicochemical profiles not explained by production method.

•

Differences instead were discussed to be due to pre and post processing methods.

•

Overall consumer liking could be optimised by mixing different production techniques.

•

Five patterns of consumer liking identified, related to sensory characteristics.

This study aimed to investigate the sensory and physicochemical differences of a range of commercial non-alcoholic lagers, as well as their influence on overall liking. Using physicochemical analysis and modified quantitative descriptive analysis (QDA) with a trained panel (n = 10) eighteen commercial non-alcoholic lagers, made using different production methods, were assessed. A subset (eleven), representing the sensory space were also assessed for hedonic liking using consumers (n = 104). Overall, it showed a clear variety of non-alcoholic lagers were selected, with different clusters of samples found with identifiable characteristics. Production methods were explored as a possible explanation for the differences in characteristics, however these did not fully explain the clusters and therefore other factors, such as pre or post processing methods are discussed. In terms of overall liking, five clusters of consumers were discovered with different patterns of liking, confirming that a wide range of non-alcoholic lagers are needed to satisfy all consumers.

Geographical differentiation of apple ciders based on volatile fingerprint

With the globalization of food trade, it's traceability and genuineness becomes increasingly more difficult. Therefore, it is necessary to develop analytical tools to define the authenticity and genuineness of food-derived products. In the current work, headspace solid-phase microextraction followed by gas chromatography-mass spectrometry (HS-SPME/GC-MS) combined with chemometric tools was used to establish the volatile fingerprint of apple ciders produced in different geographical regions of Madeira Island, in order to define their typicity and to identify putative geographical markers. A total of 143 volatile organic compounds (VOCs) belonging to different chemical families have been identified, of which 28 were found in all apple ciders independently of geographical region. Esters, terpenic and furanic compounds presented on average a higher contribution for the total volatile fingerprint in cider produced in northern region of the Island, whereas alcohols, acids, volatile phenols, carbonyl compounds and lactones in cider from southern region. Considering the relative areas of the VOCs, 43 revealed statistically significant differences (p < 0.001) between geographical regions, and 11 between northern and southern regions. A clear differentiation among cider-producing regions was observed on the developed partial least squares-discriminant analysis (PLS-DA) model. Two alcohols (1-hexanol, 1-octanol), 6 esters (methyl acetate, (Z)-3-hexen-1-ol acetate, ethyl hexanoate, ethyl nonanote, ethyl octanoate, isoamyl octanoate) and 1 terpenic compound (limonene), can be considered putative geographic markers due to their discriminatory ability. The results obtained recognize the specific and typical geographical characteristics of the cider, which will allow the forthcoming guarantee for the construction of a sustainable platform for the establishment of the authenticity and typicality of the regional cider.

In situ Creation of the Natural Phenolic Aromas of Beer: A Pulsed Electric Field Applied to Wort-Enriched Flax Seeds

To fine tune the production of phenolic aromas in beer, a pulsed electric field (PEF) was applied to beer wort, which was enriched with flax seeds. The choice of flax seeds as a source of FA is based on its high content of ferulic precursors and their intrinsic nutritional value. PEF was applied to ground flax seeds, with and without beta glycosidase. Fermentation was carried out with Saccharomyces and non-Saccharomyces yeast strains. Moreover, 4-vinylguaiacol (4-VG), a flavor highly active derived from volatile phenol, was produced by decarboxylation of ferulic acid (FA), or its precursor and flavor-inactive (4-hydroxy-3-methoxycinnamic acid). All yeast strains could metabolize FA into 4-VG, using the pure compound in the synthetic medium or in flax seeds, with the best quantity produced by Saccharomyces cerevisiae as a precursor. The method yields 4-VG production efficiencies up to 120% (mgL⁻¹). Experimental treatment conditions were conducted with E= 1 kV/cm, total time treatment 15 min (peak time t_i = 1 μs, pause time t_p = 1 ms, Total pulses 900³). Treatment efficacy is independent of the fermentation yeast.

Wine or Beer? Comparison, Changes and Improvement of Polyphenolic Compounds during Technological Phases

Wine and beer are nowadays the most popular alcoholic beverages, and the benefits of their moderate consumption have been extensively supported by the scientific community. The main source of wine and beer's antioxidant behavior are the phenolic substances. Phenolic compounds in wine and beer also influence final product quality, in terms of color, flavor, fragrance, stability, and clarity. Change in the quantity and quality of phenolic compounds in wine and beer depends on many parameters, beginning with the used raw material, its place of origin, environmental growing conditions, and on all the applied technological processes and the storage of the final product. This review represents current knowledge of phenolic compounds, comparing qualitative and quantitative profiles in wine and beer, changes of these compounds through all phases of wine and beer production are discussed, as well as the possibilities for increasing their content. Analytical methods and their importance for phenolic compound determination have also been pointed out. The observed data showed wine as the beverage with a more potent biological activity, due to a higher content of phenolic compounds. However, both of them contain, partly similar and different, phenolic compounds, and recommendations have to consider the drinking pattern, consumed quantity, and individual preferences. Furthermore, novel technologies have been developing rapidly in order to improve the polyphenolic content and antioxidant activity of these two beverages, particularly in the brewing industry.

Volatile Phenols-Important Contributors to the Aroma of Plant-Derived Foods

Volatile phenols like phenylpropanoid and benzoid compounds originate from the aromatic amino acid phenylalanine, which is biosynthesized via the shikimate/arogenate pathway. These volatile compounds contribute to the aroma of a number of economically important plant-derived foods like herbs, spices and fruits. The sequestration of numerous phenylpropanoid and benzoid compounds as glycosides occurs widely in fruits, and this pool represents an important source of flavor that can be released during storage and processing. Therefore, this review will provide an overview of the biosynthesis of free and glycosylated phenylpropanoid and benzoid compounds and their reactions during food processing, which both lead to the generation of odor-active volatile phenols in plant-derived foods.

Bottle Conditioning: Technology and Mechanisms Applied in Refermented Beers

Bottle conditioning refers to a method of adding fermenting wort or yeast suspension in sugar solution into beer in its final package. Additionally denoted as bottle refermentation, this technique has been originally developed to assure beer carbonation, and has further significance related to formation of distinctive sensory attributes and enhancement of sensory stability, which are the phenomena associated with ongoing yeast metabolic activities in the final package. This review covers historical development of the method, describes metabolic pathways applied during refermentation, and explains practical aspects of the refermentation process management. Furthermore, an overview of the traditional and novel approaches of bottle conditioning with mixed yeast bacterial cultures and its impact on the properties of final beer is provided.

Increasing the level of 4-vinylguaiacol in top-fermented wheat beer by secretory expression of ferulic acid decarboxylase from Bacillus pumilus in brewer's yeast

OBJECTIVE

The objective is to explore the effects of enhancing the activity of yeast ferulic acid decarboxylase (FDC1) on the level of 4-vinylguaiacol (4-VG) and the consumption of its precursor ferulic acid (FA) in top-fermented wheat beer.

RESULTS

Expression of Bacillus pumilus FDC1 in brewer's yeast showed a better effect on the FDC1 activity than overexpression of the endogenous enzyme. The 4-VG content was increased by 34%, and the consumption time of FA was shortened from 48 to 12 h. Since the intracellular accumulation of the FDC1 substrate did not increase over time, to reduce the FA transport burden on cells and shorten the decarboxylation time, B. pumilus FDC1 was further secreted extracellularly. The resulted strain showed a 65% increase in 4-VG content in the FA-containing medium, and produced about 3 mg L^-1 4-VG in the top-fermented wheat beer, increasing by 61% than control. However, further increasing the secretory expression level of FDC1 only accelerated FA consumption.

CONCLUSIONS

These results suggested that appropriate secretion of bacterial FDC1 into wort could be used as a potential alternative strategy to increase the level of 4-VG in top-fermented wheat beer.

Volatile Compound Screening Using HS-SPME-GC/MS on Saccharomyces eubayanus Strains under Low-Temperature Pilsner Wort Fermentation

The recent isolation of the yeast Saccharomyces eubayanus has opened new avenues in the brewing industry. Recent studies characterized the production of volatile compounds in a handful set of isolates, utilizing a limited set of internal standards, representing insufficient evidence into the ability of the species to produce new and diverse aromas in beer. Using Headspace solid-phase microextraction followed by gas chromatography-mass spectrometry (HS-SPME-GC-MS), we characterized for the first time the production of volatile compounds in 10 wild strains under fermentative brewing conditions and compared them to a commercial lager yeast. S. eubayanus produces a higher number of volatile compounds compared to lager yeast, including acetate and ethyl esters, together with higher alcohols and phenols. Many of the compounds identified in S. eubayanus are related to fruit and floral flavors, which were absent in the commercial lager yeast ferment. Interestingly, we found a significant strain × temperature interaction, in terms of the profiles of volatile compounds, where some strains produced significantly greater levels of esters and higher alcohols. In contrast, other isolates preferentially yielded phenols, depending on the fermentation temperature. This work demonstrates the profound fermentation product differences between different S. eubayanus strains, highlighting the enormous potential of this yeast to produce new styles of lager beers.

Impact of Genotype, Environment, and Malting Conditions on the Antioxidant Activity and Phenolic Content in US Malting Barley

The phenolic content and antioxidant potential of malting barley are important in brewing. The objective of our study was to investigate the effects of barley genotype, growing environment, and malting conditions on the total phenolic content and antioxidant activities of malting barley grown in North America. Eight barley cultivars grown at three locations over three years were used. For the malting study, a single barley cultivar, separated into different kernel size fractions, was germinated for various periods of time and then processed by kilning or freeze-drying. Total phenolic content (TPC) and some of the antioxidant activities, including DPPH, ABTS, and superoxide anion radical scavenging activities, reducing power, and iron (II) chelating activity, were significantly impacted by the barley genotype, growth environment, and their interactions. The TPC and most antioxidant activities were also influenced by malting conditions and were generally higher in the malted barleys of the thin kernel size fraction, four-day germination, and in samples processed by kilning, when compared to the plumper kernel size fractions, one and two days of germination, and freeze-dried samples, respectively. There were interactions between malting parameters, and stepwise regression analysis was used to suggest the contribution of each parameter to the TPC and antioxidant activities.

Total, Neutral, and Polar Lipids of Brewing Ingredients, By-Products and Beer: Evaluation of Antithrombotic Activities

The in vitro antithrombotic properties of polar lipid constituents of malted grain (MG), pelleted hops (PH), brewer’s spent grain (BSG), spent hops (SH), wort, and bottled beer from the same production line were assessed in human platelets. The total lipids (TL) were extracted according to the Bligh and Dyer method and further separated into the total neutral lipids (TNL) and total polar lipids (TPL) extracts by counter-current distribution. The TL, TNL, and TPL extracts of all samples were assessed for their ability to inhibit platelet-activating factor (PAF) and thrombin-induced human platelet aggregation. The raw materials, by-products, wort, and beer lipid extracts all exhibited antithrombotic properties against PAF and thrombin. However, the beer TPL exhibited the lowest IC₅₀ values against PAF-induced (7.8 ± 3.9 µg) and thrombin-induced (4.3 ± 3.0 µg) platelet aggregation indicating that these polar lipids were the most antithrombotic. The lipid extracts tended to be more bioactive against the thrombin pathway. The fatty acid content of all the TPL extracts were assessed using GC-MS. The fatty acid composition of the most bioactive TPL extracts, the wort and the beer, shared similar fatty acid profiles. Indeed, it was noted that fermentation seems to play a role in increasing the antithrombotic properties of polar lipids against PAF and thrombin by moderately altering the polar lipid fatty acid composition. Furthermore, the use of brewing by-products as a source of functional cardioprotective lipids warrants further investigation and valorisation.

The raise of Brettanomyces yeast species for beer production

The adequate application of Brettanomyces species could raise a potential opportunity for the beer industry, generating new products and optimizing production processes. Several valuable properties like high ethanol yield, tolerance to low pH and production of unique flavors have brought this yeast species into the spotlight. Aroma and flavor production of Brettanomyces in beer is currently under discussion, and it can be adjusted if the mechanism insights are understood. This review summarizes the recent findings in physiological, genetic and biochemical traits related to the application of Brettanomyces species for brewing.