Nondestructive Testing of Pear Based on Fourier Near-Infrared Spectroscopy

Rapid and comprehensive quality evaluation of Huang-qin from different origins by FT-IR and NIR spectroscopy combined with chemometrics

INTRODUCTION

Quality evaluation of Huang-qin is significant to ensure its clinical efficacy.

OBJECTIVE

This study aims to establish an accurate, rapid and comprehensive Huang-qin quality evaluation method to overcome the time-consuming and laborious shortcomings of traditional herbal medicine quality assessment methods.

METHODS

The contents of baicalin, baicalein and scutellarin in Huang-qin from five different origins were analyzed by FT-IR and NIR spectra combined with multivariate data technology. The quality of Huang-qin from different origins was evaluated by TOPSIS and consistency analysis based on the content of three active ingredients. The correlation between ecological factors and the accumulation of active ingredients was explored.

RESULTS

Satisfactory prediction results of PLS models were obtained. Relatively, the model based on FT-IR combined with the PLS regression method has higher R2 and smaller RMSE than the NIR combined with the PLS method. TOPSIS and consistency analysis results showed that the quality of Huang-qin from different geographical origins was significantly different. The results showed that the quality of Huang-qin produced in Shanxi Province was the best among the five origins studied. The results also found that the quality of Huang-qin in different growing areas of the same origin was not completely consistent. The correlation study showed that altitude, sunshine duration and rainfall were the main factors that caused the quality difference of medicinal materials in different geographical origins.

CONCLUSION

This study provides a reference for the rapid quantitative analysis of the active components of herbal medicine and the quality evaluation of them.

Rapid Determination of Crude Protein Content in Alfalfa Based on Fourier Transform Infrared Spectroscopy

The crude protein (CP) content is an important determining factor for the quality of alfalfa, and its accurate and rapid evaluation is a challenge for the industry. A model was developed by combining Fourier transform infrared spectroscopy (FTIS) and chemometric analysis. Fourier spectra were collected in the range of 4000~400 cm-1. Adaptive iteratively reweighted penalized least squares (airPLS) and Savitzky-Golay (SG) were used for preprocessing the spectral data; competitive adaptive reweighted sampling (CARS) and the characteristic peaks of CP functional groups and moieties were used for feature selection; partial least squares regression (PLSR) and random forest regression (RFR) were used for quantitative prediction modelling. By comparing the combined prediction results of CP content, the predictive performance of airPLST-cars-PLSR-CV was the best, with an RP2 of 0.99 and an RMSEP of 0.053, which is suitable for establishing a small-sample prediction model. The research results show that the combination of the PLSR model can achieve an accurate prediction of the crude protein content of alfalfa forage, which can provide a reliable and effective new detection method for the crude protein content of alfalfa forage.

Application, challenges and future prospects of recent nondestructive techniques based on the electromagnetic spectrum in food quality and safety

Safety and quality aspects of food products have always been critical issues for the food production and processing industries. Since conventional quality measurements are laborious, time-consuming, and expensive, it is vital to develop new, fast, non-invasive, cost-effective, and direct techniques to eliminate those challenges. Recently, non-destructive techniques have been applied in the food sector to improve the quality and safety of foodstuffs. The aim of this review is an effort to list non-destructive techniques (X-ray, computer tomography, ultraviolet-visible spectroscopy, hyperspectral imaging, infrared, Raman, terahertz, nuclear magnetic resonance, magnetic resonance imaging, and ultrasound imaging) based on the electromagnetic spectrum and discuss their principle and application in the food sector. This review provides an in-depth assessment of the different non-destructive techniques used for the quality and safety analysis of foodstuffs. We also discussed comprehensively about advantages, disadvantages, challenges, and opportunities for the application of each technique and recommended some solutions and developments for future trends.

A rapid method for identification of Lanxangia tsaoko origin and fruit shape: FT-NIR combined with chemometrics and image recognition

Lanxangia tsaoko's accurate classifications of different origins and fruit shapes are significant for research in L. tsaoko difference between origin and species as well as for variety breeding, cultivation, and market management. In this work, Fourier transform-near infrared (FT-NIR) spectroscopy was transformed into two-dimensional and three-dimensional correlation spectroscopies to further investigate the spectral characteristics of L. tsaoko. Before building the classification model, the raw FT-NIR spectra were preprocessed using multiplicative scatter correction and second derivative, whereas principal component analysis, successive projections algorithm, and competitive adaptive reweighted sampling were used for spectral feature variable extraction. Then combined with partial least squares-discriminant analysis (PLS-DA), support vector machine (SVM), decision tree, and residual network (ResNet) models for origin and fruit shape discriminated in L. tsaoko. The PLS-DA and SVM models can achieve 100% classification in origin classification, but what is difficult to avoid is the complex process of model optimization. The ResNet image recognition model classifies the origin and shape of L. tsaoko with 100% accuracy, and without the need for complex preprocessing and feature extraction, the model facilitates the realization of fast, accurate, and efficient identification.

Predictive Analysis of Linoleic Acid in Red Meat Employing Advanced Ensemble Models of Bayesian and CNN-Bi-LSTM Decision Layer Fusion Based Hyperspectral Imaging

Rapid non-destructive testing technologies are effectively used to analyze and evaluate the linoleic acid content while processing fresh meat products. In current study, hyperspectral imaging (HSI) technology was combined with deep learning optimization algorithm to model and analyze the linoleic acid content in 252 mixed red meat samples. A comparative study was conducted by experimenting mixed sample data preprocessing methods and feature wavelength extraction methods depending on the distribution of linoleic acid content. Initially, convolutional neural network Bi-directional long short-term memory (CNN-Bi-LSTM) model was constructed to reduce the loss of the fully connected layer extracted feature information and optimize the prediction effect. In addition, the prediction process of overfitting phenomenon in the CNN-Bi-LSTM model was also targeted. The Bayesian-CNN-Bi-LSTM (Bayes-CNN-Bi-LSTM) model was proposed to improve the linoleic acid prediction in red meat through iterative optimization of Gaussian process acceleration function. Results showed that best preprocessing effect was achieved by using the detrending algorithm, while 11 feature wavelengths extracted by variable combination population analysis (VCPA) method effectively contained characteristic group information of linoleic acid. The Bi-directional LSTM (Bi-LSTM) model combined with the feature extraction data set of VCPA method predicted 0.860 Rp2 value of linoleic acid content in red meat. The CNN-Bi-LSTM model achieved an Rp2 of 0.889, and the optimized Bayes-CNN-Bi-LSTM model was constructed to achieve the best prediction with an Rp2 of 0.909. This study provided a reference for the rapid synchronous detection of mixed sample indicators, and a theoretical basis for the development of hyperspectral on-line detection equipment.

CNN-LSTM Neural Network for Identification of Pre-Cooked Pasta Products in Different Physical States Using Infrared Spectroscopy

Infrared (IR) spectroscopy is nondestructive, fast, and straightforward. Recently, a growing number of pasta companies have been using IR spectroscopy combined with chemometrics to quickly determine sample parameters. However, fewer models have used deep learning models to classify cooked wheat food products and even fewer have used deep learning models to classify Italian pasta. To solve these problems, an improved CNN-LSTM neural network is proposed to identify pasta in different physical states (frozen vs. thawed) using IR spectroscopy. A one-dimensional convolutional neural network (1D-CNN) and long short-term memory (LSTM) were constructed to extract the local abstraction and sequence position information from the spectra, respectively. The results showed that the accuracy of the CNN-LSTM model reached 100% after using principal component analysis (PCA) on the Italian pasta spectral data in the thawed state and 99.44% after using PCA on the Italian pasta spectral data in the frozen form, verifying that the method has high analytical accuracy and generalization. Therefore, the CNN-LSTM neural network combined with IR spectroscopy helps to identify different pasta products.

Combination of hyperspectral imaging and entropy weight method for the comprehensive assessment of antioxidant enzyme activity in Tan mutton

The antioxidant enzymes play the crucial role in inhibiting mutton spoilage. In this study, visible near-infrared (Vis-NIR) hyperspectral imaging (HSI) combined with entropy weight method (EWM) was developed for the first time to evaluate the antioxidant properties of Tan mutton. The comprehensive index of antioxidant enzymes (AECI) consisting of peroxidase (49.34%), catalase (37.97%) and superoxidase (12.69%) was constructed by the EWM. Partial least squares regression, least squares support vector machine and artificial neural networks (ANN) were developed based on characteristic wavelengths extracted by successful projections algorithm, uninformative variable selection, iteratively retains informative variables (IRIV), regression coefficient and competitive adaptive reweighted sampling (CARS). The textural features (TF) were extracted by the gray level co-occurrence matrix and fused with the spectral data to establish models. Visualization of the changes in antioxidant enzyme activity was constructed from the optimal model. In addition, two-dimensional correlation spectra (2D-COS) with AECI as a perturbation variable was used to identify spectral features, revealing chemical bond changes order under the characteristic peaks at 612-799-473-708-559 nm. The results showed that the IRIV-CARS-TF-ANN model performed the best, with prediction set coefficient of determination (R_P²) of 0.8813, which improved 2.12%, 1.11% and 2.77% over the R_P² of full band, IRIV and IRIV-CARS, respectively. It was suggested that fusion data of HSI may effectively predict the activity of antioxidant enzymes in Tan mutton.

Towards sweetness classification of orange cultivars using short-wave NIR spectroscopy

The global orange industry constantly faces new technical challenges to meet consumer demands for quality fruits. Instead of traditional subjective fruit quality assessment methods, the interest in the horticulture industry has increased in objective, quantitative, and non-destructive assessment methods. Oranges have a thick peel which makes their non-destructive quality assessment challenging. This paper evaluates the potential of short-wave NIR spectroscopy and direct sweetness classification approach for Pakistani cultivars of orange, i.e., Red-Blood, Mosambi, and Succari. The correlation between quality indices, i.e., Brix, titratable acidity (TA), Brix: TA and BrimA (Brix minus acids), sensory assessment of the fruit, and short-wave NIR spectra, is analysed. Mix cultivar oranges are classified as sweet, mixed, and acidic based on short-wave NIR spectra. Short-wave NIR spectral data were obtained using the industry standard F-750 fruit quality meter (310-1100 nm). Reference Brix and TA measurements were taken using standard destructive testing methods. Reference taste labels i.e., sweet, mix, and acidic, were acquired through sensory evaluation of samples. For indirect fruit classification, partial least squares regression models were developed for Brix, TA, Brix: TA, and BrimA estimation with a correlation coefficient of 0.57, 0.73, 0.66, and 0.55, respectively, on independent test data. The ensemble classifier achieved 81.03% accuracy for three classes (sweet, mixed, and acidic) classification on independent test data for direct fruit classification. A good correlation between NIR spectra and sensory assessment is observed as compared to quality indices. A direct classification approach is more suitable for a machine-learning-based orange sweetness classification using NIR spectroscopy than the estimation of quality indices.

Prediction Models for the Content of Calcium, Boron and Potassium in the Fruit of 'Huangguan' Pears Established by Using Near-Infrared Spectroscopy

It has been proved that the imbalance of the proportion of elements of 'Huangguan' pears in the pulp and peel, especially calcium, boron and potassium, may be important factors that can seriously affect the pears' appearance quality and economic benefits. The objective of this study was to predict the content of calcium, boron and potassium in the pulp and peel of 'Huangguan' pears nondestructively and conveniently by using near-infrared spectroscopy (900-1700 nm) technology. Firstly, 12 algorithms were used to preprocess the original spectral data. Then, based on the original and preprocessed spectral data, full-band prediction models were established by using Partial Least Squares Regression and Gradient Boosting Regression Tree. Finally, the characteristic wavelengths were extracted by Genetic Algorithms to establish the characteristic wavelength prediction models. According to the prediction results, the value of the determination coefficient of the prediction sets of the best prediction models for the three elements all reached ideal levels, and the values of their Relative analysis error also showed high levels. Therefore, the micro near-infrared spectrometer based on machine learning can predict the content of calcium, boron and potassium in the pulp and peel of 'Huangguan' pears accurately and quickly. The results also provide an important scientific theoretical basis for further research on the degradation of the quality of 'Huangguan' pears caused by a lack of nutrients.