Valorization of Tomato Seed By-Products as a Source of Fatty Acids and Bioactive Compounds by Using Advanced Extraction Techniques

Tomato seed extract promotes health of the gut microbiota and demonstrates a potential new way to valorize tomato waste

The current effort to valorize waste byproducts to increase sustainability and reduce agricultural loss has stimulated interest in potential utilization of waste components as health-promoting supplements. Tomato seeds are often discarded in tomato pomace, a byproduct of tomato processing, yet these seeds are known to contain an array of compounds with biological activity and prebiotic potential. Here, extract from tomato seeds (TSE), acquired from pomace, was evaluated for their ability to effect changes on the gut microbiota using an ex vivo strategy. The results found that TSE significantly increased levels of the beneficial taxa Bifidobacteriaceae in a donor-independent manner, from a range of 18.6-24.0% to 27.0-51.6% relative abundance following treatment, yet the specific strain of Bifidobacteriaceae enhanced was inter-individually variable. These structural changes corresponded with a significant increase in total short-chain fatty acids, specifically acetate and propionate, from an average of 13.3 to 22.8 mmol/L and 4.6 to 7.4 mmol/L, respectively. Together, these results demonstrated that TSE has prebiotic potential by shaping the gut microbiota in a donor-independent manner that may be beneficial to human health. These findings provide a novel application for TSE harvested from tomato pomace and demonstrate the potential to further valorize tomato waste products.

Microwave-Assisted Extraction/UHPLC-Q-Orbitrap-MS-Based Lipidomic Workflow for Comprehensive Study of Lipids in Soft Cheese

In this work, Microwave-Assisted Extraction (MAE) was proposed as an alternative and environmentally friendly technique in lipidomics to study the lipid fingerprint of soft cheeses, such as mozzarella. For method development, a first step concerning an evaluation of extraction solvents was carried out via testing three different mixtures, including methanol/ethyl acetate, isopropanol/ethyl acetate, and ethanol/ethyl acetate, at a 1:2 v/v ratio. The latter was chosen as a solvent mixture for subsequent method optimization. MAE conditions, in terms of solvent volume, time, and temperature, were explored to define their effects on extraction capability through a full factorial experimental design. The best compromise to extract more lipids at the same time was obtained with 24 mL g-1 for solvent-to-solid ratio, 65 °C for temperature, and 18 min for time. Lipid analyses were conducted by UHPLC-Q-Orbitrap-MS associated with multivariate statistics. The developed lipidomic workflow allowed for the extraction of over 400 lipids grouped into 18 different subclasses. The results confirmed that MAE is a suitable technique for lipid extraction in the omics approach with high efficiency, even using low-cost and less toxic solvents. Moreover, a comprehensive structure characterization of extracted lipids, in terms of fatty acid composition and regiochemistry, was carried out.

Exploring the Sequential-Selective Supercritical Fluid Extraction (S3FE) of Flavonoids and Esterified Triterpenoids from Calendula officinalis L. Flowers

One of the many advantages of supercritical fluid extraction (SFE) is the possibility of using it in sequential and selective approaches. This is due to the use of a dynamic extraction mode in addition to the possibility of altering the composition of the modifier during the extraction process. In this study, the optimization of Calendula officinalis L. extraction of non-polar and polar compounds was achieved using three-level Box-Behnken designs (BBD). For non-polar compounds, the factors were pressure, temperature, and EtOH percentage. As for the polar compounds, the three variables were temperature, the total modifier percentage, and H2O added in the modifier as an additive. The recovery of selectively rich extracts in triterpendiol esters and narcissin was possible using a sequential two-step SFE. The first step was performed at 80 °C and 15% EtOH, and the second at 40 °C and 30% EtOH:H2O 80:20 v:v with a total of 60 min of extraction. Additionally, the SFE extraction of non-polar compounds was scaled up on a pilot-scale extractor, demonstrating similar results. Finally, the SFE results were compared to ultrasound-assisted extraction (UAE).

Recent advances in the combination of organic solvent-free extraction, chemical standardization, antioxidant assay, and cell culture metabolomics for functional food and its by-product

Functional foods and their by-products contain a wide range of bioactive components with an array of health benefits and were proposed to improve public health, well-being, and others. To achieve a circular economy, the processing and extraction of flavonoids, phenolic compounds, and others from functional food and agri-food wastes will require the use of environmentally friendly, sustainable, and a low-cost solution. Extraction methods that can eliminate the use of organic solvents, suitable for use in the laboratory and production of extracts will be covered. This will include subcritical water extraction (SBE), pressurized hot water extraction (PHWE), supercritical fluid extraction (SFE), and others. Based on the selected analytical methods, the determination of the marker or bioactive compounds and chemical fingerprints will provide the control measures to identify the batch-to-batch variation of the composition of the functional food products obtained. The combination of chemical standardization with antioxidant assay, such as DPPH and ABTS+ will provide further information on the quality of the extracts. Lastly, to ascertain the biological and physiological relevance of the antioxidant properties of the target sample, treatment of the antioxidant compounds or extracts was carried out using cellular models, and validated using other experimental endpoints, such as metabolomics.

Evaluation of Selected Medicinal, Timber and Ornamental Legume Species' Seed Oils as Sources of Bioactive Lipophilic Compounds

Bioactive lipophilic compounds were investigated in 14 leguminous tree species of timber, agroforestry, medicinal or ornamental use but little industrial significance to elucidate their potential in food additive and supplement production. The tree species investigated were: Acacia auriculiformis, Acacia concinna, Albizia lebbeck, Albizia odoratissima, Bauhinia racemosa, Cassia fistula, Dalbergia latifolia, Delonix regia, Entada phaseoloides, Hardwickia binata, Peltophorum pterocarpum, Senegalia catechu, Sesbania sesban and Vachellia nilotica. The hexane-extracted oils of ripe seeds were chromatographically analysed for their fatty acid composition (GC-MS), tocochromanol (RP-HPLC/FLD), squalene and sterol (GC-FID) content. A spectrophotometrical method was used to determine total carotenoid content. The results showed generally low oil yield (1.75-17.53%); the highest was from H. binata. Linoleic acid constituted the largest proportion in all samples (40.78 to 62.28% of total fatty acids), followed by oleic (14.57-34.30%) and palmitic (5.14-23.04%) acid. The total tocochromanol content ranged from 100.3 to 367.6 mg 100 g^-1 oil. D. regia was the richest and the only to contain significant amount of tocotrienols while other oils contained almost exclusively tocopherols, dominated by either α-tocopherol or γ-tocopherol. The total carotenoid content was highest in A. auriculiformis (23.77 mg 100 g^-1), S. sesban (23.57 mg 100 g^-1) and A. odoratissima (20.37 mg 100 g^-1), and ranged from 0.7 to 23.7 mg 100 g^-1 oil. The total sterol content ranged from 240.84 to 2543 mg 100 g^-1; A. concinna seed oil was the richest by a wide margin; however, its oil yield was very low (1.75%). Either β-sitosterol or Δ5-stigmasterol dominated the sterol fraction. Only C. fistula oil contained a significant amount of squalene (303.1 mg 100 g^-1) but was limited by the low oil yield as an industrial source of squalene. In conclusion, A. auriculiformis seeds may hold potential for the production of carotenoid-rich oil, and H. binata seed oil has relatively high yield and tocopherol content, marking it as a potential source of these compounds.

Mechanisms Underlying Neurodegenerative Disorders and Potential Neuroprotective Activity of Agrifood By-Products

Neurodegenerative diseases, characterized by progressive loss in selected areas of the nervous system, are becoming increasingly prevalent worldwide due to an aging population. Despite their diverse clinical manifestations, neurodegenerative diseases are multifactorial disorders with standard features and mechanisms such as abnormal protein aggregation, mitochondrial dysfunction, oxidative stress and inflammation. As there are no effective treatments to counteract neurodegenerative diseases, increasing interest has been directed to the potential neuroprotective activities of plant-derived compounds found abundantly in food and in agrifood by-products. Food waste has an extremely negative impact on the environment, and recycling is needed to promote their disposal and overcome this problem. Many studies have been carried out to develop green and effective strategies to extract bioactive compounds from food by-products, such as peel, leaves, seeds, bran, kernel, pomace, and oil cake, and to investigate their biological activity. In this review, we focused on the potential neuroprotective activity of agrifood wastes obtained by common products widely produced and consumed in Italy, such as grapes, coffee, tomatoes, olives, chestnuts, onions, apples, and pomegranates.

Novel zero waste tactics for commercial vegetables – recent advances

Commercial vegetables include tomatoes, potatoes, onions, and eggplant due to their surplus production, availability, and affordability. The valorisation of the massive wastage of commercial vegetables and providing a long-term solution has been challenging. The review addresses the implications of biowastes on the environment and fosters the recent investigations into valorising commercial vegetable waste to develop multiple value-added products. It discussed the outcomes of the multiple technologies, majorly on green chemistry extraction, while outlining other methods such as fermentation, enzymatic treatments, 3D printing foods, high-pressure homogenisation, microencapsulation, bio-absorption method, and pyrolysis for their respective vegetable wastes. Agri-residues can be a valuable source for formulating functional ingredients, natural additives, biodiesel, dyes, and animal feed. This comprehensive review proposes a strategy to upcycle low-cost biowaste to boost the economic and ecological benefits. The current review captures the interests and great collaborations between researchers, industrialists, policymakers, waste management bodies, and eco-activists.