Removal Efficiency and Risk Assessment of Polycyclic Aromatic Hydrocarbons in a Typical Municipal Wastewater Treatment Facility in Guangzhou, China

Efficiency comparison of extraction methods for the determination of 11 of the 16 USEPA priority polycyclic aromatic hydrocarbons in water matrices: Sources of origin and ecological risk assessment

As a result of their toxicity, ease of analysis, and environmental occurrence, 16 polycyclic aromatic hydrocarbons (PAHs) were chosen as priority pollutants by the USEPA. Few studies have been conducted to assess the levels of PAHs in South Africa, especially KwaZulu Natal province, and no work has been done in the selected study area. Therefore, this study aimed to evaluate the levels of such PAHs in river water and wastewater samples and evaluate their source and ecological risk. The status of these PAHs in the South African environment has not been investigated fully, which is a gap this study intended to fill. The PAHs were determined using solid-phase extraction (SPE) and dispersive liquid-liquid microextraction (DLLME) methods. The optimization and validation of these methods indicated that both methods can be used for the extraction of PAHs in liquid samples. This is because of the acceptable %recovery of 72.1%-118% for SPE and 70.7%-88.4% for DLLME with a %RSD less than 10% (indicating high precision) that was obtained. The limit of detection and limit of quantification ranged from 5.0 to 18 ng/L and 6.0-20 ng/L for SPE and from 10 to 44 ng/L and 11 to 63 ng/L for DLLME. These results demonstrated that SPE is more accurate and sensitive than DLLME, which was also confirmed by statistical analysis. The PAH concentration levels ranged from not detected (nd) to 1046 ng/L in river water and nd to 778 ng/L in wastewater samples with naphthalene demonstrating dominance over all other PAHs in both water matrices. The PAHs were found to be of petrogenic origin and posed low ecological risk on average. Integr Environ Assess Manag 2024;20:1598-1610. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Bioassay-based identification and removal of target and suspect toxicants in municipal wastewater: Impacts of chemical properties and transformation

Municipal wastewater contains numerous chemicals and transformation products with highly diverse physiochemical properties and intrinsic toxicity; thus, it is imperative but challenging to identify major toxicants. Herein, toxicity identification evaluation (TIE) was applied to identify major toxicants in a typical municipal wastewater treatment plant (WWTP). Impacts of chemical properties on the removal of contaminants and toxicity at individual treatment stages were also examined. The WWTP influent caused 100% death of Daphnia magna and zebrafish embryos, and toxicity characterization suggested that organics, metals, and volatiles all contributed to the toxicity. Toxicity identification based on 189 target and approximately one-thousand suspect chemicals showed that toxicity contributions of organic contaminants, metals, and ammonia to D. magna were 77%, 4%, and 19%, respectively. Galaxolide, pyrene, phenanthrene, benzo[a]anthracene, fluoranthene, octinoxate, silver, and ammonia were identified as potential toxicants. Comparatively, the detected transformation products elicited lower toxicity than their respective parent contaminants. In contrast, the analyzed contaminants showed negligible contributions to the toxicity of zebrafish embryos. Removal efficiencies of these toxicants in WWTP were highly related to their hydrophobicity. Diverse transformation and removal efficiencies of contaminants in WWTPs may influence the chemical compositions in effluent and ultimately the risk to aquatic organisms in the receiving waterways.

Membrane Bioreactors for Produced Water Treatment: A Mini-Review

Environmentalists are prioritizing reuse, recycling, and recovery systems to meet rising water demand. Diving into produced water treatment to enable compliance by the petroleum industry to meet discharge limits has increased research into advanced treatment technologies. The integration of biological degradation of pollutants and membrane separation has been recognized as a versatile technology in dealing with produced water with strength of salts, minerals, and oils being produced during crude refining operation. This review article presents highlights on produced water, fundamental principles of membrane bioreactors (MBRs), advantages of MBRs over conventional technologies, and research progress in the application of MBRs in treating produced water. Having limited literature that specifically addresses MBRs for PW treatment, this review also attempts to elucidate the treatment efficiency of MBRs PW treatment, integrated MBR systems, general fouling, and fouling mitigation strategies.

A Mechanistic Model to Assess the Fate of Naphthalene and Benzo(a)pyrene in a Chilean WWTP

Polycyclic aromatic hydrocarbons (PAHs) are a family of organic compounds of widespread presence in the environment. They are recalcitrant, ubiquitous, prone to bioaccumulation, and potentially carcinogenic. Effluent from wastewater treatment plants (WWTPs) constitutes a major source of PAHs into water bodies, and their presence should be closely monitored, especially considering the increasing applications of potable and non-potable reuse of treated wastewater worldwide. Modeling the fate and distribution of PAHs in WWTPs is a valuable tool to overcome the complexity and cost of monitoring and quantifying PAHs. A mechanistic model was built to evaluate the fate of PAHs in both water and sludge lines of a Chilean WWTP. Naphthalene and benzo(a)pyrene were used as models of low-MW and high-MW PAHs. As there were no reported experimental data available for the case study, the influent load was determined through a statistical approach based on reported values worldwide. For both naphthalene and benzo(a)pyrene, the predominant mechanism in the water line was sorption to sludge, while that in the sludge line was desorption. Compared to other studies in the literature, the model satisfactorily describes the mechanisms involved in the fate and distribution of PAHs in a conventional activated sludge WWTP. Even though there is evidence of the presence of PAHs in urban centers in Chile, local regulatory standards do not consider PAHs in the disposal of WWTP effluents. Monitoring of PAHs in both treated effluents and biosolids is imperative, especially when considering de facto reuse and soil amendment in agricultural activities are currently practiced downstream of the studied WWTP.

Adsorption of polycyclic aromatic hydrocarbons by surfactant-modified clinoptilolites for landfill leachate treatment

The authors report the potential adsorption capacities of three surfactant-modified clinoptilolites (MC)-cetylpyridinium chloride (CPC)-MC, didodecyldimethylammonium bromide (DDAB)-MC, and hexadecyltrimethylammonium bromide (HDTMA)-MC-for the removal of polycyclic aromatic hydrocarbons (PAHs) from aquatic environments and landfill leachate. A liquid-liquid extraction method was used to extract PAHs from water and GC/MS was used to analyse the PAHs. PAH accumulations on CPC-MC, DDAB-MC, and HDTMA-MC were linear over 21 successive batch adsorption tests for anthracene (708, 737, and 750 µg/g), fluoranthene (1355, 1583, and 1303 µg/g), fluorene (973, 1060, and 1147 µg/g), phenanthrene (844, 1057, and 989 µg/g), and pyrene (1343, 1569, and 1269 µg/g). The leachability after 21 successive accumulations was <2% for anthracene, <4% for fluoranthene, <3% for fluorene, <4% for pyrene, and <5% for phenanthrene for each adsorbent. PAH removals from landfill leachate for anthracene, fluoranthene, fluorene, phenanthrene, and pyrene were 97.8%, 98.6%, 95.7%, 97.0%, and 98.5% for CPC-MC and 99.0%, 99.6%, 98.0%, 99.0%, and 99.6% for DDAB-MC, respectively, meeting the fresh water quality standards established by British Columbia and the World Health Organization (WHO) for anthracene, fluoranthene, and fluorene. The molecular weight and molecular structure of PAHs and the hydrophobicity of adsorbents can fundamentally influence the PAH adsorption mechanism based on π-π stacking.

Determination of Polycyclic Aromatic Hydrocarbons and Their Methylated Derivatives in Sewage Sludge from Northeastern China: Occurrence, Profiles and Toxicity Evaluation

This paper assesses the occurrence, distribution, source, and toxicity of polycyclic aromatic hydrocarbons (PAHs), and their methylated form (Me-PAHs) in sewage sludge from 10 WWTPs in Northeastern China was noted. The concentrations of ∑PAHs, ∑Me-PAHs ranged from 567 to 5040 and 48.1 to 479 ng.g−1dw, which is greater than the safety limit for sludge in agriculture in China. High and low molecular weight 4 and 2-ring PAHs and Me-PAHs in sludge were prevalent. The flux of sludge PAHs and Me-PAHs released from ten WWTPs, in Heilongjiang province, was calculated to be over 100 kg/year. Principal component analysis (PCA), diagnostic ratios and positive matrix factorization (PMF) determined a similar mixed pyrogenic and petrogenic source of sewage sludge. The average values of Benzo[a]pyrene was below the safe value of 600 ng.g−1 dependent on an incremental lifetime cancer risk ILCR of 10⁻⁶. Sludge is an important source for the transfer of pollutants into the environment, such as PAHs and Me-PAHs. Consequently, greater consideration should be given to its widespread occurrence.

Enhanced degradation of benzo[a]pyrene and toxicity reduction by microbubble ozonation

The microbubble technique has drawn great attention for efficient utilization of ozone for advance oxidation processes. Therefore, in this study, microbubble ozonation was investigated to evaluate the removal efficiency and toxicity reduction of benzo[a]pyrene. Compared with conventional macrobubble ozonation, microbubble ozonation produced higher concentrations of hydroxyl radicals and ozone in aqueous solutions, resulting in more efficient and persistent degradation of benzo[a]pyrene. Moreover, microbubble ozonation completely removed the acute toxicity of benzo[a]pyrene to Daphnia magna, whereas the toxicity reduction by macrobubble ozonation was not consistent owing possibly to toxic degradation products. These findings suggest that microbubble ozonation is a promising technique in terms of both chemical degradation and toxicity reduction of organic pollutants.

Occurrence, Removal, and Mass Balance of Polycyclic Aromatic Hydrocarbons and Their Derivatives in Wastewater Treatment Plants in Northeast China

Polycyclic aromatic hydrocarbons (PAHs), 33 methylated PAHs (Me-PAHs), and 14 nitrated PAHs (NPAHs) were measured in wastewater treatment plants (WWTPs) to study the removal efficiency of these compounds through the WWTPs, as well as their source appointment and potential risk in the effluent. The concentrations of ∑PAHs, ∑Me-PAHs, and ∑NPAHs were 2.01–8.91, 23.0–102, and 6.21–171 µg/L in the influent, and 0.17–1.37, 0.06–0.41 and 0.01–2.41 µg/L in the effluent, respectively. Simple Treat 4.0 and meta-regression methods were applied to calculate the removal efficiencies (REs) for the 63 PAHs and their derivatives in 10 WWTPs and the results were compared with the monitoring data. Overall, the ranges of REs were 55.3–95.4% predicated by the Simple Treat and 47.5–97.7% by the meta-regression. The results by diagnostic ratios and principal component analysis PCA showed that “mixed source” biomass, coal composition, and petroleum could be recognized to either petrogenic or pyrogenic sources. The risk assessment of the effluent was also evaluated, indicating that seven carcinogenic PAHs, Benzo[a]pyrene, Dibenz[a,h]anthracene, and Benzo(a)anthracene were major contributors to the toxics equivalency concentrations (TEQs) in the effluent of WWTPs, to which attention should be paid.

Dried aerobic heterotrophic bacteria from treatment of food and beverage effluents: Screening of correlations between operation parameters and microbial protein quality

Consortia of aerobic heterotrophic bacteria (AHB) have potential as sustainable microbial protein (MP) source in animal feed. A systematic screening of the nutritional value and safety of AHB biomass from full-scale activated sludge plants from 25 companies in the food sector was performed. The variable protein content (21-49%) was positively correlated with biomass-specific nitrogen loading rate and negatively with sludge retention time (SRT). Compared to the essential amino acid profile of soybean meal protein, AHB displayed an overall surplus of threonine and valine, and deficits in cysteine, histidine, lysine and phenylalanine. Histidine was positively correlated with bCOD/PO₄^3- in the influent and valine, isoleucine and threonine with SRT. Most AHB samples were safe apropos heavy metals, polycyclic aromatic hydrocarbons and antibiotics. Some pesticides exceeded regulatory limits, necessitating mitigation. This work highlighted that the food sector can provide high-quality MP, while retrofitting existing activated sludge plants towards high-rate processes can increase AHB quality and productivity.

Coking wastewater treatment plant as a sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and ecological risk assessment

The spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in sediments of Maba River, a major tributary of Beijiang River (South China). A total of 13 samples from Maba River and its tributary, Meihua River, were analyzed for 16 PAHs. The total concentration of 16 PAHs (ΣPAH) in high and low water period ranged between 47.61 to 25480.98 ng g-1, with a mean concentration of 4382.98 ng g-1, and 60.30 to 15956.62 ng g-1 with a mean concentration of 3664.32 ng g-1, respectively. Three-ring and four-ring PAHs were the dominant species. It was concluded that a pattern of pyrolytic input as a major source of PAHs in sediments through the molecular ratio method for the source identification, such as HMW/LMW PAHs, Flu/(Flu+Pyr), IcdP/(IcdP+BghiP) and BaA/(BaA+Chr). It is suggested that the pollution emission from the iron and steel plant might be the most important sources of PAHs into Maba River water system. The threat of PAHs contamination to biota of the river was assessed using effect range low (ERL) and effect range median (ERM) values, which suggested that PAHs in Maba River and its tributary had already caused ecological risks.

Analysis of various solid samples by synchronous fluorescence spectroscopy and related methods: A review

This critical Review covers the literature reports on analysis of different types of solid samples by the synchronous fluorescence spectroscopy (SFS) and its varieties, which include synchronous phosphorescence spectroscopy and synchronous luminescence spectroscopy, in the three decades (1990-2019). Both the qualitative and quantitative spectroscopic analysis is described for a wide range of specimens. Their physical forms and chemical composition include: a) organic and inorganic analytes pre-concentrated from solution on matrices (beads, membranes, filters, disks, paper), b) natural and synthetic multi-component specimens of complex composition (biological tissues, soil, polymers) and c) inorganic and coordination compounds including porous materials and particularly metal-organic frameworks (MOFs). The comparison with the data obtained by "conventional" optical emission spectroscopy and other analytical techniques (when available) is presented. The specific advantages of the high-resolution varieties of the method, the first- and second-derivative solid-state synchronous fluorescence, luminescence, and phosphorescence spectroscopy are described. An attention is also paid to practical conditions of the typical tests, and the relevant experimental setups. The impetus is on the emerging capabilities of this highly promising method e.g. in-situ monitoring of chemical reactions, in-vivo diagnostics, surface reactions, and detection of the adsorbate. The existing challenges are analyzed, and the unexplored application "niches" to further develop this and the related analytical methods are revealed. 145 references, 9 Tables, 17 Figures and 1 Scheme.

Occurrence, seasonal variation and environmental impact of phosphorus flame retardants in a large scale wastewater treatment plant

The occurrence, seasonal variation and emission of nine widely used phosphorus flame retardants (PFRs) were investigated in a wastewater treatment plant (WWTP) located in Guangzhou, China, over 1 year. Results showed that PFRs were widely detected in wastewater and sewage sludge. Tris(2-chloroisopropyl) phosphate (TCIPP) was the most dominant PFRs in influent, effluent, and sludge. Significant seasonal variation of total PFRs in the influent was observed (p < 0.05). However, no significant seasonal variation found in chlorinated and alkyl PFRs. The emission of PFRs was comparable with the previously reported values of decabromodiphenyl ether in WWTPs. Risk quotient for PFRs showed low eco-toxicity risk in effluent for aquatic organisms. Since the removal efficiency of total PFRs was less than 30% and the use of PFRs had been increasing, continuous monitoring of the environmental impact on the receiving water is still needed.

Modelling PAHs removal in activated sludge process: effect of disintegration

The removal of polycyclic aromatic hydrocarbons (PAHs) in activated sludge was evaluated using two laboratory-scale bioreactors, coupled or not with a disintegration system (sonication). Mass balances performed on each system underlined that PAHs removal was significantly improved after sludge disintegration, especially for the higher molecular weight PAHs studied, which tended to adsorb to suspended matter. A model was developed in order to study the effect of sludge disintegration on the content of dissolved and colloidal matter (DCM), and to predict the potential impacts on PAHs availability and degradation. Results showed that this new model was efficient for capturing apparent degradation improvement trends and for discriminating between the involved mechanisms. This study showed that DCM content increased after sludge disintegration, and proved to be the main driver for improving PAHs apparent degradation.

Removal efficiency and mass balance of polycyclic aromatic hydrocarbons, phthalates, ethoxylated alkylphenols and alkylphenols in a mixed textile-domestic wastewater treatment plant

In this work the occurrence and fate of polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), mono and diethoxylate alkylphenols (AP_1-2EOs) and alkylphenols (APs) have been investigated during a two-weeks period in a facility treating mixed textile-domestic wastewater (Prato, Italy). The wastewater treatment plant (WWTP) consists of primary sedimentation, activated sludge biological oxidation, secondary sedimentation, clariflocculation and ozonation. The sludge is treated within the facility by thickening, dewatering and final incineration, thus providing the almost quantitative removal of the adsorbed micropollutants. Naphthalene (50%), di(2-ethylhexyl) phthalate (74%) and branched 4-nonylphenols (59%) were the individual main representative compounds of each class in the influent wastewater, which showed concentration ranges of 5.6-66, 85-290 and 21-133μg/L for PAHs, PAEs and APs+AP_1-2EOs, respectively. The WWTP efficiently removed PAHs, PAEs and APs+AP_1-2EOs, providing effluent concentrations of 0.075-0.16ng/L 0.38-9.9μg/L and 0.53-1.4μg/L. All targeted priority and priority-hazardous micropollutants showed effluent concentrations in line with the European environmental quality standards (EQS), even though for di(2-ethylhexyl) phthalate and benzo(a)pyrene after correction for the dilution factor of the recipient. The WWTP performance was evaluated by mass balance, verifying its accuracy by monitoring Pb and Cd as conservative species. The biological treatment sections provided mass losses of 85.5%, 74.5% and 56.8% for APs+AP_1-2EOs, PAEs and PAHs, highlighting efficient biotransformation performances of the activated sludge process. However, for the more volatile PAHs (e.g. naphthalene), a significant contribution of stripping cannot be excluded. A remarkable mass loss was also determined in the ozonation stage for PAEs (72.9%) and especially PAHs (97.0%), whereas a lower efficiency was observed for APs+AP_1-2EOs (41.3%). The whole plant allowed for obtaining an almost quantitative removal (96.7-98.4%) for all targeted compounds.

Fate of sterols, polycyclic aromatic hydrocarbons, pharmaceuticals, ammonia and solids in single-stage anaerobic and sequential anaerobic/aerobic/anoxic sludge digestion

Emerging contaminants (ECs), such as pharmaceuticals, sterols and polycyclic aromatic hydrocarbons (PAHs) are frequently detected in the environment. ECs are refractory, toxic, tend to bioaccumulate and have a potential to disrupt the endocrine system of living organisms. These compounds are only partially eliminated in wastewater treatment plants (WWTPs). Due to their hydrophobic nature, they tend to accumulate in sludge. However, the fate of the majority of ECs in sludge treatment processes is not fully understood. In this study, the effect of a sequential anaerobic/aerobic/anoxic (AN/AERO/ANOX) digestion and a conventional single-stage AN digestion (as control) was investigated on mixed primary and secondary sludge. Digesters were operated at an overall solid retention time (SRT) of 18 days. The steady-state results have shown that sequential AN/AERO/ANOX digestion configurations improved the removal of three classes of ECs (e.g., sterols, PAHs and pharmaceuticals) by either reducing their accumulation or enhancing their removal. Moreover, sequential AN/AERO/ANOX digestion also achieved 45% less ammonia generation, 20% faster digestate dewaterability and 4% enhanced volatile solids removal compared to single-stage AN digestion.

TiO₂-Based Hybrid Nanocomposites Modified by Phosphonate Molecules as Selective PAH Adsorbents

A robust sol-gel process was developed for the synthesis of surface-functionalized titania nanocrystallites bearing unsaturated groups starting from molecular heteroleptic single-source precursors. Molecules and nanomaterials were thoroughly characterized by multinuclear liquid and solid-state nuclear magnetic resonance (NMR), infra-red (FT-IR, DRIFT) spectroscopies. Nitrogen adsorption-desorption (BET), thermogravimetric (TG) and elemental analyses demonstrated the reliability and the fine tuning of the surface functionalization in terms of ratio TiO₂:ligand. The as-prepared materials were used as nano-adsorbents to remove mixture of 16 polycyclic aromatic hydrocarbon (PAHs) from aqueous solutions. Adsorption kinetic experiments were carried out for 24 h in solutions of one PAH [benzo(a)pyrene, 220 ppb] and of a mixture of sixteen ones [220 ppb for each PAH]. Most kinetic data best fitted the pseudo-second order model. However, in PAHs mixture, a competition process took place during the first hours leading to a remarkable high selectivity between light and heavy PAHs. This selectivity could be fine-tuned depending on the nature of the unsaturated group of the phosphonate framework and on the nanomaterial textures.

Priority substances and emerging pollutants in urban rivers in Ukraine: Occurrence, fluxes and loading to transboundary European Union watersheds

The occurrence and fluxes of 18 priority substances and emerging pollutants listed in the European Union Water Framework Directive and a Watch List (trace metals (Cd, Pb and Ni), nonylphenols, octylphenols, 8 polyaromatic hydrocarbons, 4 dioxin-like polychlorinated biphenyls and diclofenac) were investigated in a Ukrainian city and the mass discharge loads of these compounds into EU-transboundary watersheds were estimated. Fluxes of chemicals were calculated per capita and per area of the Ukrainian urban territory and used to estimate mass loading of priority and emerging concern compounds from Lviv, Uzhorod and Chernivtsi (West Ukraine) to neighbouring EU-transboundary rivers. The highest loading was found for trace metals (1.15 t a^-1), diclofenac (0.7 t a^-1) and nonylphenols (0.4 t a^-1). Transboundary water contamination must be considered in order to successfully manage water resources in a manner that fulfils the requirements of EU environmental quality standards.

Removal and fate of polycyclic aromatic hydrocarbons in a hybrid anaerobic-anoxic-oxic process for highly toxic coke wastewater treatment

Elimination of polycyclic aromatic hydrocarbons (PAHs) from coke wastewater is crucial to minimize the PAHs contamination levels to the environment. Knowledge about the characteristics of PAHs removal in biological treatment processes, especially hybrid systems, for real coke wastewater treatment has been very scarce. In this study, a lab-scale hybrid anaerobic-anoxic-oxic (A₁/A₂/O) process was used to treat highly toxic coke wastewater and operated more than 600 d at total hydraulic retention time (HRT) of 50 h, 40 h, 30 h, 20 h and internal mixed liquor recirculation ratio (R) of 3, 6, 9. Removal performance and behaviors of priority PAHs in the hybrid A₁/A₂/O system were investigated. The results showed that the appropriate total HRT and R from oxic reactor to anoxic reactor for organics and nitrogen removal was 40 h and 3, respectively. The concentrations of total PAHs were very high (254-488 μg/L) in the raw coke wastewater, and effectively reduced to 4.1-4.5 μg/L in the final effluent by the present system under the optimized operational conditions. Among the three treatment units, anoxic reactor made the largest contribution to the total PAHs removal. Large amounts of PAHs (415-1310 μg/g) were adsorbed to the activated sludge in the anoxic and oxic reactor, leading to a much higher load of PAHs (2535 μg/d) in the excess sludge than that in the treated coke wastewater (93 μg/d) at SRT 60 d. Therefore, the excess sludge was identified as the major emission source of PAHs in coke wastewater during the hybrid A₁/A₂/O process, and might pose an environmental risk if the excess sludge was not properly treated and disposed.

Equilibrium sampling reveals increasing thermodynamic potential of polycyclic aromatic hydrocarbons during sewage sludge digestion

The reuse of digested sludge from wastewater treatment plants (WWTPs) as soil fertilizer poses a risk for contamination of soil and water environments. The present study provides a new approach for investigating the exposure of hydrophobic organic chemicals in sewage sludge. The methodology of equilibrium sampling with multiple thicknesses of silicone was successfully validated and applied to complex sludge matrices. Polycyclic aromatic hydrocarbon (PAH) concentrations in silicone (C_silicone) were determined and compared across four WWTPs. Activity ratios (ARs), defined as C_silicone at equilibrium with digested sludge (final product) over C_silicone at equilibrium with secondary sludge (intermediate product), were in the range 0.85-20 with all except one AR>1. These ARs thus revealed increased thermodynamic potential of both parent and alkylated PAHs in digested sludge compared with secondary sludge, and thereby higher exposure of PAHs in sludge after digestion than before digestion. This observation can be explained by the concept of "solvent depletion" as organic matter decreased by a factor of 1.3 during digestion, resulting in reduced sorptive capacity and increased freely dissolved concentrations (C_free). The PAHs with logK_ow > 6 had ARs close to 1.3, whereas PAHs with logK_ow < 6 showed higher ARs than the organic matter decrease factor of 1.3. C_free in digested sludge were higher than reported in rural soil and generally consistent with levels reported for Baltic Sea sediment.

Solubilization of polycyclic aromatic hydrocarbons (PAHs) with phenol in coking wastewater treatment system: Interaction and engineering significance

Polycyclic aromatic hydrocarbons (PAHs) are accumulated in the sludge collected from the coking wastewater treatment. Phenol with its efficient degradation observed in biological treatment promotes the solubility of PAHs in aqueous phase. The interaction mechanism of phenol and PAHs in aqueous and sludge phases was systematically studied in two full-scale engineering projects composed of anaerobic-oxic-oxic (A-O₁-O₂) and anaerobic-oxic-hydrolytic-oxic (A-O₁-H-O₂) sequences. The results showed that reasonable use of phenol facilitates solubilization of PAHs alleviating their emission problems. The ΔPAHs/Δphenol mass ratio in the sludge phase of A-O₁-H-O₂ system (146.3) exceeded that in A-O₁-O₂ one (63.80), exhibiting a good solubilization effect on PAHs with their more efficient degradation in the former. The full-scale observations were verified in laboratory solubilization experiments using phenanthrene (Phen), pyrene (Pyr) and benzo[a]pyrene (Bap) as the models of 3-, 4- and 5-ring PAHs, respectively. The binding energies of [phenol^-PAHs] complexes were calculated using computational density functional theory showing consistency with the experimentally observed phenol-facilitated solubilization efficiencies in the row of Phen>Pyr>Bap. The results showed the fate and distribution of PAHs in coking wastewater treatment affected by the presence of phenol serving as a cost effective reagent for enhanced solubilization of PAHs from the coking wastewater sludge.

Characterization of a Microbial Consortium for the Bioremoval of Polycyclic Aromatic Hydrocarbons (PAHs) in Water

Pollution of freshwater ecosystems from polycyclic aromatic hydrocarbons (PAHs) is a global concern. The US Environmental Protection Agency (EPA) has included the PAHs pyrene, phenanthrene, and naphthalene among the 16 priority compounds of special concern for their toxicological effects. The aim of this study was to adapt and characterize a microbial consortium from ore waste with the potential to remove these three PAHs from water. This microbial consortium was exposed to the target PAHs at levels of 5, 10, 20, 50, and 100 mg L−1 for 14 days. PAH bioremoval was measured using the analytical technique of solid phase microextraction, followed by gas chromatography mass spectrometry (SPME-GC/MS). The results revealed that up to 90% of the target PAHs can be removed from water after 14 days at a concentration level of 100 mg L−1. The predominant group of microorganisms identified at the phylum taxonomic level were the Proteobacteria, while the Actinobacteria were the predominant subgroup. The removal of phenanthrene, naphthalene, and pyrene predominantly occurred in specimens of genera Stenotrophomonas, Williamsia, and Chitinophagaceae, respectively. This study demonstrates that the use of specific microorganisms is an alternative method of reducing PAH levels in water.