Benefits and Drawbacks of Ultrasound-Assisted Extraction for the Recovery of Bioactive Compounds from Marine Algae

A comprehensive review of the impact of anthocyanins from purple/black Rice on starch and protein digestibility, gut microbiota modulation, and their applications in food products

This review explores the impact of anthocyanins derived from purple and black rice on starch and protein digestibility, gut microbiota modulation, and their applications in food production. Anthocyanins are shown to reduce starch digestibility by forming complexes with starch, thereby inhibiting key digestive enzymes. Additionally, they can influence protein digestion by inducing structural changes that enhance resistance to digestive processes. Evidence suggests that black rice anthocyanins positively modulate gut microbiota composition, potentially improving overall gut health. The incorporation of anthocyanin-rich extracts into various food products, such as bread and beverages, underscores their potential as functional ingredients. This review provides valuable insights into the health benefits associated with rice anthocyanins and identifies areas for future research to optimize their application in functional foods aimed at managing metabolic health.

Extraction and purification of total flavonoids from Zanthoxylum planispinum Var. Dintanensis leaves and effect of altitude on total flavonoids content

To investigate the impact of varying altitudes on the functional components of the leaves of Zanthoxylum planispinum var. Dintanensis, this research collected leaf samples from three different elevations: 610 m, 833 m, and 1083 m. Utilizing water and ethanol as extraction solvents, the study optimized extraction parameters via an ultrasonic-assisted technique to maximize the yield of total flavonoids. Following extraction, five types of macroporous adsorption resins were employed for purification. Significant flavonoid constituents within the purified extracts were qualitatively analyzed using liquid chromatography-mass spectrometry (LC-MS). The antioxidant activity of the extracts was also assessed pre- and post-purification. Findings indicated that water was a more effective solvent than ethanol for flavonoid extraction, yielding optimal results at 70 °C, with a solid-to-liquid ratio of 1:70, 30 min, and 480 W. Conversely, ethanol extraction yielded optimal results at a concentration of 65%, a liquid-to-solid ratio of 1:30, 60 °C, 30 min, and 360 W. Among the tested resins, AB-8 demonstrated the highest efficacy for purifying flavonoid extracts, with adsorption data conforming best to the Freundlich isotherm model. Optimal conditions for AB-8 purification included a crude extract concentration of 2.50 mg/mL, pH 5, and temperature 25 °C, eluted with 10 mL of 60% (v/v) ethanol. A notable increase in total flavonoid content was observed, rising from an average of 3.43-16.00%, with a recovery yield of 82.12%. Leaves collected at 830 m contained the highest total flavonoid content, with rutin predominating over naringenin chalcone and naringenin. At 1083 m, naringenin chalcone was most abundant, while the highest concentration of naringenin was recorded at 610 m. This study provides optimized protocols for the extraction and purification of total flavonoids from Z. planispinum var. Dintanensis leaves, contributing to the development of potential applications for these bioactive compounds in various fields.

Advances in innovative extraction techniques for polysaccharides, peptides, and polyphenols from distillery by-products: Common extraction techniques, emerging technologies, and AI-driven optimization

Distillery by-products, such as distillers' grains, stillage, and vinasse, are rich in organic compounds and offer immense potential for the recovery of bioactive substances, including polysaccharides, peptides, and polyphenols. The effective utilization of these by-products is critical for achieving long-term sustainability in the distillery sector. This review highlights advancements in extraction techniques, focusing on enzymatic, ultrasound-assisted, and microwave-assisted methods while also exploring emerging approaches such as supercritical fluid extraction, pressurized liquid extraction, pulse electric field, and synthetic biology. These innovative techniques address the limitations of traditional methods by improving extraction yields, reducing processing times, and enhancing sustainability. Additionally, the integration of machine learning and artificial intelligence is discussed as a promising avenue for optimizing extraction parameters and scaling up processes. By evaluating recent achievements and identifying new opportunities, this study aims to promote sustainable practices in the distillery industry, emphasizing economic feasibility, environmental impacts, and resource optimization for value-added product development.

Learning ultrasound assisted extraction through the use of sugar-coated chocolates

Extraction of bioactive compounds from vegetal matrices is a dynamic field in pharmaceutical, cosmetic and food industry. Many of these compounds have high medicinal value. Ultrasonic assisted extraction (UAE) becomes an interesting alternative to reduce both the amount of chemical solvents and the processing time. The aim of the present paper is to introduce, intuitively, the physical mechanisms involved in ultrasonic extraction for non-specialists. Two different mechanisms, cavitation and acoustic streaming, can be easily experimentally shown. The proposed experiment is the extraction of the sugar cover in sugar-coated chocolates. Extraction is analyzed using video tools to obtain a quantitative evolution of the process. Graphical results and videos are a useful tool for showing the basis of ultrasonic extraction in several levels from primary school to university students. In the event that the necessary ultrasound equipment is not available, we hope that the videos available in the supplementary material will be useful for teaching the topic.

Chemical Composition of Essential Oils and Their Potential Applications in Postharvest Storage of Cereal Grains

Insect infestation and microbial, particularly mold contamination, are the major causes of stored grain deterioration during postharvest storage, which results in a significant loss in grain quality and quantity, and the formation of toxic chemicals such as mycotoxins. Pesticides, together with physical protection strategies, have been widely used to control insects and molds in stored grains, but their uses present significant environmental and health problems. This has led to the exploration of safer pesticide alternatives. Essential oils (EOs) are highly concentrated materials extracted from leaves, stems, flowers, seeds, roots, fruit rinds, resins, or barks. They are multifunctional due to their complex chemical composition. Thus, EOs are frequently used for their therapeutic, antimicrobial, odoriferous, and flavor properties in a wide range of products like medicine, cosmetics, and foods. This review provides comprehensive information on the chemical compositions of EOs commonly used in the food industry, factors influencing EO composition, and recent studies on the potential of EOs as alternatives to synthetic pesticides and fungicides for stored grain protection. The relationship between chemical compositions of EOs and their anti-insects and antimicrobial potentials, as well as current approaches/technologies of using EOs for food preservation, are also covered. However, this review also highlights the need for research on the development of feasible and affordable methodologies to apply effective EOs or encapsulated EOs in grain storage settings, particularly for organic grain protection.

Optimized Extraction Protocols for Bioactive Antioxidants from Commercial Seaweeds in Portugal: A Comparative Study of Techniques

This study aimed to optimize the extraction conditions for a valuable source of antioxidants: seaweed. Therefore, ten seaweed samples were subjected to a solid-liquid extraction (SLE), where the extraction conditions (biomass (g): solvent (mL) ratio, temperature, and time) were optimized using response surface methodology (RSM). The seaweeds were also subjected to subcritical water extraction (SWE) (140 and 190 °C) and ultrasound-assisted extraction (UAE) (10 and 20 min). The antioxidant capacity of the extracts was determined through the ferric-reducing antioxidant power and the 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid). The total phenolic content revealed the significance of temperature and biomass; solvent ratio parameters in the extraction process with higher conditions generally promoting the release of phenolic compounds. Furthermore, applying RSM allowed for the identification of optimal conditions and the establishment of predictive models that can be valuable in industrial-scale extraction processes. The antioxidant potency composite index (APCI) shows that SWE at 190 °C stands out, with E. bicyclis reaching an APCI score of 46.27%. The AGREEprep evaluation showed that UAE is the most sustainable method, achieving the highest score (0.69). The results of this study contribute to the development of efficient and standardized extraction protocols for each seaweed species, allowing for the maximum yield of antioxidants.

Promoting the Emerging Role of Pulse By-Products as Valuable Sources of Functional Compounds and Novel Food Ingredients

The growth of the human population worldwide has increased food demand, generating the massive production of foods and consequently causing enormous production of waste every year. The indiscriminate exploitation of the already limited natural resources has also generated serious environmental and economic crises. The use, or reuse, of waste or by-products represents a viable solution to constrain the problem by promoting alternative routes of exploitation with multiple food and biotechnological applications. This review focuses on the most recent advances in the valorization of food by-products, with specific reference to legume-derived by-products. The main technological solutions for reintroducing and/or valorizing food waste are reported together with a critical discussion of the main pros and cons of each alternative, supported by practical case studies whenever available. First, the possibility to exploit the by-products as valuable sources of functional compounds is presented by reviewing both conventional and innovative extraction techniques tailored to provide functional extracts with multiple food, pharmaceutical, and biotechnological applications. Second, the possibility to valorize the by-products as novel food ingredients by inclusion in different formulations, either as a whole or as hydrolyzed/fermented derivatives, is also presented and discussed. To the best of our knowledge, several of the technological solutions discussed have found only limited applications for waste or by-products derived from the legume production chain; therefore, great efforts are still required to gain the full advantages of the intrinsic potential of pulse by-products.

Extraction and Processing of Bioactive Phytoconstituents from Widely Used South African Medicinal Plants for the Preparation of Effective Traditional Herbal Medicine Products: A Narrative Review

Medicinal plants are sources of crude traditional herbal medicines that are utilized to reduce the risk of, treat, or manage diseases in most indigenous communities. This is due to their potent antioxidant and anti-inflammatory effects. It is estimated that about 80% of the population in developing countries rely on herbal traditional medicines for healthcare. This signifies the need for traditional herbal medicines, which are polyherbal formulations prepared by traditional health practitioners. This review examines preparatory steps to extract bioactive phytoconstituents and post-extraction processes to increase the potency of the extracted bioactive phytoconstituents. Achieving this will allow for the reduced use of plant materials and promote the sustainable use of the limited resource of medicinal plants, especially in our South African context. Electronic ethnobotanical books and online databases were used to find studies that focus on phytoconstituent extraction and post-extraction processing to enhance the potency of the extracted bioactive phytoconstituents. Modification of the extracted bioactive phytoconstituents to synthesize daughter compounds facilitates an enhancement in their potency and bioavailability. Based on the data collected through this review, the importance of understanding the properties of the targeted phytoconstituents is essential in selecting the required extraction method. This determines the quality and yield of extracted bioactive phytoconstituents.

A Comparative Review of Alternative Fucoidan Extraction Techniques from Seaweed

Fucoidan is a sulfated polysaccharide found in brown seaweed. Due to its reported biological activities, including antiviral, antibacterial and anti-inflammatory activities, it has garnered significant attention for potential biomedical applications. However, the direct relationship between fucoidan extracts' chemical structures and bioactivities is unclear, making it extremely challenging to predict whether an extract will possess a given bioactivity. This relationship is further complicated by a lack of uniformity in the recent literature in terms of the assessment and reporting of extract properties, yield and chemical composition (e.g., sulfate, fucose, uronic acid and monosaccharide contents). These inconsistencies pose significant challenges when directly comparing extraction techniques across studies. This review collected data on extract contents and properties from a selection of available studies. Where information was unavailable directly, efforts were made to extrapolate data. This approach enabled a comprehensive examination of the correlation between extraction techniques and the characteristics of the resulting extracts. A holistic framework is presented for the selection of fucoidan extraction methods, outlining key heuristics to consider when capturing the broader context of a seaweed bioprocess. Future work should focus on developing knowledge within these heuristic categories, such as the creation of technoeconomic models of each extraction process. This framework should allow for a robust extraction selection process that integrates process scale, cost and constraints into decision making. Key quality attributes for biologically active fucoidan are proposed, and areas for future research are identified, such as studies for specific bioactivities aimed at elucidating fucoidan's mechanism of action. This review also sets out future work required to standardize the reporting of fucoidan extract data. Standardization could positively enhance the quality and depth of data on fucoidan extracts, enabling the relationships between physical, chemical and bioactive properties to be identified. Recommendations on best practices for the production of high-quality fucoidan with desirable yield, characteristics and bioactivity are highlighted.

Ultrasound-assisted modification of oat protein isolates: Structural and functional enhancements

Escalating global protein demand necessitates the commercialization of protein rich products. Oat is a promising high-quality protein source but it requires structural and functional modifications to diversify its application. The current investigation was focused on the impact of different powers of ultrasonic waves (200, 400, and 600 W) on structural and functional characteristics of oat protein isolates to improve its techno-functional properties. Higher strength ultrasound waves generated flat sheet structures which were observed while analyzing microstructure of oat protein isolate (OPI). However, non-significant variation in molecular weight distribution were observed in different treatments. At 600 W power of ultrasonic waves the protein fragments show local accumulation, increased α-helix content. Due to uncoiling of protein structure decrease in β-sheets and β-turns was also observed at 600 W. Protein turbidity decreased significantly under low power ultrasonic treatment (200 W) which significantly increased at higher power. Moderate ultrasonic treatment (400 W) promoted protein dissolution, and maintained a good balance between β-sheets (71.04 ± 0.08), α-helix (16.27 ± 0.02) and β-turns (12.68 ± 0.03), exhibiting optimized flexibility and structural integrity. Whereas, higher strength (600 W) significantly destroyed protein structure. The amino acid content decreased significantly with increasing ultrasonic power. The thermal characteristics of OPI remained unaffected after ultrasound treatment. In conclusion, modifications of secondary and tertiary structure induced by moderate ultrasonic treatment (400 W) improved functional properties of OPI. The 400 W treatment resulted in highest essential amino acid content (EAA) i.e., 22.75 ± 0.82 mg/100 mg and total amino acid content (TAA) i.e., 64.94 ± 2.7 mg/100 mg, which are significantly higher than WHO and FAO standards, suggesting best total and essential amino acid production in comparison to other treatments.

Applications of Natural Polymers in the Grapevine Industry: Plant Protection and Value-Added Utilization of Waste

The grapevine industry is confronted with challenges such as plant stress from environmental factors and microbial infections, alongside the need for sustainable waste management practices. Natural polymers offer promising solutions to these issues due to their biocompatibility, biodegradability, and functional versatility. This review explores the dual role of natural polymers in enhancing the grapevine industry: as protective agents against various stressors and as carriers for the delivery of valuable compounds recovered from grapevine wastes. We examine the use of natural polymers such as chitosan, alginate, and cellulose in formulating bio-based protective coatings and treatments that bolster plant resistance to abiotic stress, pathogens, and pests. Additionally, the review delves into the innovative utilization of grapevine residues, including skins, seeds, and stems, as sources of polyphenols and other bioactive compounds. These compounds can be efficiently encapsulated in natural polymer matrices for applications in agriculture, food, and pharmaceuticals. Key topics include the mechanisms of action, benefits, and limitations of natural polymer-based interventions, as well as case studies demonstrating their practical implementation in vineyards. The review also addresses future research directions, emphasizing the need for integrated approaches that enhance sustainability and economic viability in the grapevine industry.

Recent advancements in ultrasound-assisted biomolecule extraction from prokaryotic and eukaryotic cells: a review

With numerous advantages over conventional techniques, ultrasound-assisted extraction (UAE) has become a viable method for the effective extraction of biomolecules from prokaryotic and eukaryotic cells. The fundamentals and workings of UAE are examined in this review, focusing on current developments, including how these impact the extraction of proteins, lipids, enzymes, and other bioactive compounds. UAE not only enhances cell disruption and mass transfer, leading to improved extraction yields, but also preserves the integrity of the extracted bioactive molecules under optimized conditions, making it a preferred choice in Biochemistry and Biotechnology. Additionally, this review explores recent innovative approaches that combine ultrasound with other techniques like enzymatic digestion, supercritical CO2, deep eutectic solvents, and Three-Phase Partitioning (UA-TPP) etc, to further enhance extraction efficiency. The differences in extraction effectiveness between prokaryotic and eukaryotic cells are attributed to cellular structure and ultrasonic conditions. Overall, this review highlights UAE's promise as a viable and efficient substitute for biomolecule extraction concerning prokaryotic and eukaryotic cells while bringing up areas that need additional research and development.

An Overview on Nettle Studies, Compounds, Processing and the Relation with Circular Bioeconomy

This paper provides an interdisciplinary overview of nettle bioactive compounds and processing, and ir also explores its role in the circular bioeconomy. Urtica dioica L. is sometimes referred to as a multipurpose herbaceous species that has been used historically in food, textiles, and medicine owing its rich profile of biological compounds. This study synthesizes the recent literature to examine nettle's applications across various industries, from nutritional supplements to eco-friendly fiber materials. In addition, it highlights nettle's potential in sustainable production chains, aligning with the EU's bioeconomy directives. The methods involve a comprehensive literature review and data analysis, with a focus on bioactive compounds and eco-sustainable applications. The results of this review underscore the plant's unique adaptability to low-input farming and its contributions to reducing resource dependency. The findings position nettle as a valuable resource for sustainable innovation, emphasizing its relevance within circular economic models.

Optimization of Combined Ultrasound and Microwave-Assisted Extraction for Enhanced Bioactive Compounds Recovery from Four Medicinal Plants: Oregano, Rosemary, Hypericum, and Chamomile

This study presents the synergistic application of ultrasound- and microwave-assisted extraction (UAE-MAE) as a novel and efficient method for recovering bioactive compounds from the medicinal plants oregano, rosemary, Hypericum perforatum, and chamomile. Extraction parameters, including microwave (MW) power, ultrasound (US) power, and extraction time, were optimized using the response surface methodology (RSM), with ethanol as the solvent. Extracts were evaluated for total phenolic content (TPC) via the Folin-Ciocalteu method and antioxidant activity (IC50) using the DPPH assay. High-performance liquid chromatography with diode array detection (HPLC-DAD) identified the main bioactive compounds contributing to their antioxidant and therapeutic potential. The optimized UAE-MAE conditions enhanced phenolic recovery and antioxidant potential across all plants. Notably, Hypericum perforatum exhibited the highest TPC (53.7 mg GAE/g) and strongest antioxidant activity (IC50 29.8 mg extract/g) under 200 W MW, 450 W US, and 12 min, yielding 14.5%. Rosemary achieved the highest yield (23.36%) with a TPC of 26.35 mg GAE/g and an IC50 of 40.75 mg extract/g at 200 W MW, 700 W US, and 8 min. Oregano's optimal conditions (500 W MW, 700 W US, 12 min) produced a TPC of 34.99 mg GAE/g and an IC50 of 50.31 mg extract/g. Chamomile extracts demonstrated lower phenolic content and antioxidant activity but achieved significant yields under 500 W MW, 700 W US, and 5 min. This study highlights UAE-MAE's superior efficiency, showcasing its potential to maximize phenolic recovery sustainably, making it a promising technique for industrial and therapeutic applications.

Impact of Ultrasound- and Microwave-Assisted Extraction on Bioactive Compounds and Biological Activities of Jania rubens and Sargassum muticum

This study represents the first investigation into the ultrasonic and microwave extraction of bioactive metabolites from Jania rubens (J. rubens) (red seaweed) and Sargassum. muticum (S. muticum) (brown seaweed), with a focus on their biological activities. The research compares ultrasound-assisted extraction (UAE) with microwave-assisted extraction (MAE) utilizing a hydromethanolic solvent to evaluate their effects on these seaweeds' bioactive compounds and biological activities. The assessment included a series of antioxidant essays: DPPH, ABTS, phenanthroline, and total antioxidant capacity, followed by enzyme inhibition activities: alpha-amylase and urease. Results revealed significant proportions of phenolic compounds, ranging from 48.31 ± 0.32 to 74.42 ± 0.80 μg GAE/mg, depending on the extraction method. The extracts demonstrated a high antioxidant activity, with IC50 values ranging from 26.58 ± 0.39 to 87.55 ± 0.69 μg/mL. Notably, the MAE extract of S. muticum showed a value of 48.11 ± 2.75 μg/mL for alpha-amylase inhibition, which is strictly superior to the reference acarbose with an IC50 equal to 3431.01 μg/mL. UPLC-ESI-MS/MS analysis identified 14 bioactive compounds. The proportion of riboflavin with MAE was 70.58% and 59.11% for J. rubens and S. muticum fractions, respectively. These findings underscore the critical influence of extraction technique selection on bioactive compounds' yield and efficiency, highlighting the potential of algal biomass as a sustainable alternative in various applications.

Alternative green solvents associated with ultrasound-assisted extraction: A green chemistry approach for the extraction of carotenoids and chlorophylls from microalgae

This study proposes a method for the ultrasonic extraction of carotenoids and chlorophyll from Scenedesmus obliquus and Arthrospira platensis microalgae with green solvents. Ethanol and ethanolic solutions of ionic liquids were tested with a variety of extraction parameters, including number of extractions, time of extraction, and solid-liquid ratio R(S/L), to determine the optimal conditions. After selecting the most effective green solvent (ethanol), the process conditions were established: R(S/L) of 1:10, three extraction cycles at 3 min each), giving an extraction yield of 2602.36 and 764.21 μgcarotenoids.gdried biomass-1; and 22.01 and 5.81 mgchlorophyll.gdried biomass-1 in S. obliquus and A. platensis, respectively. The carotenoid and chlorophyll extracts obtained using ethanol were shown to be potent scavengers of peroxyl radical, being 5.94 to 26.08 times more potent α-tocopherol. These findings pave the way for a green strategy for valorizing microalgal biocompounds through efficient and environmentally friendly technological processes.

The Utilisation of Fucus vesiculosus Algae Extracts in the Production of Microgreens Hordeum vulgare L. with an Increased Content of Selected Bioactive Compounds

Algae extracts may be a promising alternative to harmful chemicals and pesticides used commercially in the cultivation of plants with higher nutritional and health-promoting values. The cultivation of barley microgreens (Hordeum vulgare L.) was facilitated by the use of aqueous extracts from Fucus vesiculosus algae, which served as a biostimulant. Seeds for experiments were produced in accordance with EU standards, certified as organic and used to grow plants in a controlled pot experiment. A qualitative analysis of the extract, which was used to irrigate the plants, was also performed in this study, as well as stimulating properties by activating the system protecting against oxidative stress. Total phenolic content (TPC), total flavonoid content (TFV) and enzymes involved in their formation such as phenylalanine ammonia lyase (PAL) and polyphenol oxidase (PPO), as well as enzymes involved in the removal of reactive oxygen species such as catalase (CAT) and superoxide dismutase (SOD), were determined in the obtained microgreen samples. Antioxidant activity against DPPH (2,2-diphenyl-1-picrylhydrazyl) was also evaluated. A noticeable increase in SOD content and antioxidant activity against DPPH was observed in barley microgreen samples after extract treatment. These results suggest that the use of extracts of this beneficial alga can enhance the antioxidant activity of the barley microgreens.

Overview and Toxicity Assessment of Ultrasound-Assisted Extraction of Natural Ingredients from Plants

In different food technology unit operations, toxicity can be increased due to unwanted side reactions and is typically associated with the increased thermal energy that facilitates the latter. Authorities in food technology have not provided clear guidelines on using ultrasound (US), but they also have not prohibited its use in food processing. In this study, the source materials and ultrasound-assisted reactions reported in the literature were reviewed to investigate potential side reactions in ultrasound-assisted extraction (UAE). Industrial or pilot-scale processes published in the open literature and in industry patents were also examined. UAE is a highly effective extraction method that significantly increases extraction yields. According to the literature, there is no direct evidence of the formation of toxic compounds from natural food ingredients caused by UAE. However, experimental studies are urgently needed to assess the potential accumulation of toxic substances, especially in the case of certain plants.

Bioactive Polysaccharides from Gracilaria lemaneiformis: Preparation, Structures, and Therapeutic Insights

Gracilaria lamaneiformis, a red seaweed, is an abundant source of bioactive polysaccharides with significant health-promoting properties. Nevertheless, the broad application of G. lamaneiformis in the nutraceutical and pharmaceutical sectors remains constrained due to the absence of comprehensive data. This review provides a detailed examination of the preparation methods, structural characteristics, and biological activities of G. lamaneiformis polysaccharides (GLPs). We explore both conventional and advanced extraction techniques, highlighting the efficiency and yield improvements achieved through methods such as microwave-, ultrasonic-, and enzyme-assisted extraction. The structural elucidation of GLPs using modern analytical techniques, including high-performance liquid chromatography, gas chromatography, and nuclear magnetic resonance spectroscopy, is discussed, providing comprehensive insights into their molecular composition and configuration. Furthermore, we critically evaluate the diverse biological activities of GLPs, including their antioxidant, anti-inflammatory, antitumor, and gut microbiota modulation properties. This review underscores the therapeutic potential of GLPs and suggests future research directions to fully harness their health benefits.

Comparative profiling of Chlorella vulgaris cells, extracts, and intact chloroplasts using electron transfer matrix-assisted laser desorption/ionization mass spectrometry (ET-MALDI-MS)

The intricate composition of microalgal pigments plays a crucial role in various biological processes, from photosynthesis to biomarker identification. Traditional pigment analysis methods involve complex extraction techniques, posing challenges in maintaining analyte integrity. In this study, we employ Electron Transfer Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry (ET-MALDI-MS) to compare the pigmentary profiles of Chlorella vulgaris intact cells, chloroplasts, and solvent extracts. We aim to obtain comprehensive extracts rich in polar and non-polar compounds using ultrasound-assisted and supercritical fluid extraction methods. Additionally, intact chloroplasts are isolated using a lysis buffer and sucrose density gradient centrifugation. Our ET-MALDI-MS analysis reveals distinct compositional differences, highlighting the impact of extraction protocols on microalgal pigment identification. We observe prominent signals corresponding to radical cations of key pigments, including chlorophylls and carotenoids, which are crucial for C. vulgaris identification. Furthermore, ET-MALDI-MS facilitates the identification of specific lipids within chloroplast membranes and other organelles. This study underscores the rapid and precise nature of ET-MALDI-MS in microalgal biomarker analysis, providing valuable insights into phytoplankton dynamics, trophic levels, and environmental processes. C. vulgaris emerges as a promising model for studying pigment composition and membrane lipid diversity, enhancing our understanding of microalgal ecosystems.

Pre-clinical protective potentials of Carica papaya constituents in experimentally induced anemia

OBJECTIVE

Anemia is a pathological condition characterized by reduced oxygen bioavailability and/or changes in hematological parameters. This study investigated the anti-anemic activities of Carica papaya (CP) phytoconstituents in aluminium-chloride-induced anemic rats.

METHOD

Twenty-seven rats were randomized into nine groups of three rats as follows; group 1 was the normal (non-induced) group, 2-9 were anemic rats administered 1 mL distilled water, standard drug (3 mg/kg body weight (bw) ferrous sulphate), 100, 300 and 500 mg/kg bw of crude methanolic extract of CP (CMECP) of the leaf and 100, 300 and 500 mg/kg bw of CMECP of the seed respectively in the first stage of the study. In the second stage, thirty-three rats were randomized into eleven groups of three rats as follows; group 1 was the normal group, 2-11 were anemic rats treated with 1 mL distilled water, standard drug, 75 mg/kg bw, 150 mg/kg of alkaloid fraction of CP seed, 75 mg/kg bw, 150 mg/kg bw of flavonoid fraction of CP seed, 75 mg/kg bw and 150 mg/kg of alkaloid fraction of CP leaf, 75 mg/kg bw and 150 mg/kg bw of flavonoid fraction of CP leaf respectively.

RESULTS

Treatment of anemic rats with CP extracts and fractions of the seed and leaf significantly reversed the hematological parameters and body weight of anemic rats in a dose independent fashion. The CMECP leaf at 100 and 500 mg/kg gave PCV of 42.50±0.50 and 47.00±0.50, while the seed gave 49.50±0.50 and 42.50±0.50 respectively after 2 weeks of treatment. However, the alkaloid and flavonoid fraction of CP presented better anti-anemic properties probably due to constituents' synergism.

CONCLUSION

This study concluded that CP possesses phytoconstituents which potentiates it as a safe anti-anemic drug candidate.

Curcuminoid Contents in Rhizomes of Some Zingiberaceous Plants Sold via Online Platforms: Influence of Species and Cultivation Location

Zingiberaceous plants are versatile and find application in various fields, including food, medicine, and cosmetics. Recently, turmeric and other Zingiberaceous plants have become readily available through online platforms. However, the quality, specifically the curcuminoid content, has not been adequately assessed. In light of this issue, this study is aimed at analyzing the curcuminoid contents, including bisdemethoxycurcumin, demethoxycurcumin, and curcumin, using high-performance liquid chromatography. The analysis targets the rhizomes of Zingiber montanum (ZM), Curcuma aromatica (CA), Curcuma wanenlueanga (CW), Curcuma zedoaria (CZ), and sixteen Curcuma longa (CL) samples sold on online platforms. The influence of species and cultivation locations was evaluated, compared, and clustered. The results indicated that CL exhibited the highest curcuminoid contents, followed by CA, CZ, ZM, and CW, respectively. Curcumin was not detected in CW, while bisdemethoxycurcumin and demethoxycurcumin were absent in ZM. Cluster analysis revealed that CW was closely related to ZM, and CA was closely related to CZ, while CL was not closely related to either cluster. Among the sixteen CL samples, the most commonly found curcuminoids were curcumin, followed by bisdemethoxycurcumin and demethoxycurcumin, respectively. Three samples contained curcuminoid contents of less than 5%, failing to meet the standard level specified in the Thai Herbal Pharmacopoeia. Furthermore, ten samples had total curcuminoid contents higher than 10%, with three samples exceeding 15%. The top three samples with the highest total curcuminoid contents from different locations were as follows: Tha Yang District, Phetchaburi Province (17.02%); Phop Phra District, Tak Province (16.97%); and Pak Tho District, Ratchaburi Province (15.45%). Cluster analysis revealed that CL samples could be grouped into two major categories: low curcuminoid and high curcuminoid groups. This study offers valuable insights for consumers seeking high-quality rhizomes of Zingiberaceous plants with high curcuminoids, through online platforms. By focusing on the curcuminoid content, consumers can make informed decisions when purchasing Zingiberaceous plants online. This information not only aids in selecting superior quality rhizomes but also enhances the overall consumer experience by ensuring the potency and efficacy of the purchased products.

Enhancing the Biological Effects of Bioactive Compounds from Microalgae through Advanced Processing Techniques: Pioneering Ingredients for Next-Generation Food Production

The heightened interest in healthy dietary practices and the preference for fresh, minimally processed foods with reduced additives have witnessed a significant surge among consumers. Within this context, bioactive compounds have garnered attention as potent agents offering beneficial biological effects when integrated into food formulations. Nevertheless, the efficacy of these bioactive compounds in product development encounters numerous challenges during various processing and storage stages due to their inherent instability. Addressing these limitations necessitates exploring novel technological approaches tailored explicitly to the application of bioactive compounds in food production. These approaches should not only focus on preserving the bioactive compounds within food matrices but also on retaining the sensory attributes (color, taste, and aroma) of the final food products. The impact of microalgae and their bioactive compounds on human health and well-being has been extensively reported in the literature. However, there is still a gap regarding the processing and stability of microalgal bioactive compounds to improve their application in the food industry. The main goal of the present work is to point out how to overcome technological challenges in enhancing the stability of bioactive compounds from microalgae for optimal food applications.

The Evolution of Sonochemistry: From the Beginnings to Novel Applications

Sonochemistry is the use of ultrasonic waves in an aqueous medium, to generate acoustic cavitation. In this context, sonochemistry emerged as a focal point over the past few decades, starting as a manageable process such as a cleaning technique. Now, it is found in a wide range of applications across various chemical, physical, and biological processes, creating opportunities for analysis between these processes. Sonochemistry is a powerful and eco-friendly technique often called "green chemistry" for less energy use, toxic reagents, and residues generation. It is increasing the number of applications achieved through the ultrasonic irradiation (USI) method. Sonochemistry has been established as a sustainable and cost-effective alternative compared to traditional industrial methods. It promotes scientific and social well-being, offering non-destructive advantages, including rapid processes, improved process efficiency, enhanced product quality, and, in some cases, the retention of key product characteristics. This versatile technology has significantly contributed to the food industry, materials technology, environmental remediation, and biological research. This review is created with enthusiasm and focus on shedding light on the manifold applications of sonochemistry. It delves into this technique's evolution and current applications in cleaning, environmental remediation, microfluidic, biological, and medical fields. The purpose is to show the physicochemical effects and characteristics of acoustic cavitation in different processes across various fields and to demonstrate the extending application reach of sonochemistry. Also to provide insights into the prospects of this versatile technique and demonstrating that sonochemistry is an adapting system able to generate more efficient products or processes.

Applications of high-intensity ultrasound on shrimp: Potential, constraints, and prospects in the extraction and retrieval of bioactive compounds, safety, and quality

The global shrimp market holds substantial prominence within the food industry, registering a significant USD 24.7 billion in worldwide exportation in 2020. However, the production of a safe and high-quality product requires consideration of various factors, including the potential for allergenic reactions, occurrences of foodborne outbreaks, and risks of spoilage. Additionally, the exploration of the recovery of bioactive compounds (e.g., astaxanthin [AX], polyunsaturated fatty acids, and polysaccharides) from shrimp waste demands focused attention. Within this framework, this review seeks to comprehend and assess the utilization of high-intensity ultrasound (HIUS), both as a standalone method and combined with other technologies, within the shrimp industry. The objective is to evaluate its applications, limitations, and prospects, with a specific emphasis on delineating the impact of sonication parameters (e.g., power, time, and temperature) on various applications. This includes an examination of undesirable effects and identifying areas of interest for current and prospective research. HIUS has demonstrated promise in enhancing the extraction of bioactive compounds, such as AX, lipids, and chitin, while concurrently addressing concerns such as allergen reduction (e.g., tropomyosin), inactivation of pathogens (e.g., Vibrio parahaemolyticus), and quality improvement, manifesting in reduced melanosis scores and improved peelability. Nonetheless, potential impediments, particularly related to oxidation processes, especially those associated with lipids, pose a hindrance to its widespread implementation, potentially impacting texture properties. Consequently, further optimization studies remain imperative. Moreover, novel applications of sonication in shrimp processing, including brining, thawing, and drying, represent a promising avenue for expanding the utilization of HIUS in the shrimp industry.

Extraction of Antioxidants from Brown Macroalgae Fucus spiralis

In this study, different extraction methods and conditions were used for the extraction of antioxidants from brown macroalgae Fucus spiralis. The extraction methodologies used were ultrasound-assisted extraction (ultrasonic bath and ultrasonic probe), extraction with a vortex, extraction with an Ultra-Turrax® homogenizer, and high-pressure-assisted extraction. The extracts were analyzed for their total phenolic content (TPC) and their antioxidant activity, and evaluated through the 2,2-difenil-1-picrilhidrazil (DPPH) free radical scavenging method and ferric reducing antioxidant power (FRAP) assay. Ultrasonic probe-assisted extraction yielded the highest values of TPC (94.78-474.16 mg gallic acid equivalents/g extract). Regarding the antioxidant activity, vortex-assisted extraction gave the best DPPH results (IC50 1.89-16 µg/mL), while the highest FRAP results were obtained using the Ultra-Turrax® homogenizer (502.16-1188.81 μmol ascorbic acid equivalents/g extract). For each extraction method, response surface methodology was used to analyze the influence of the experimental conditions "extraction time" (t), "biomass/solvent ratio" (R), "solvent" (S, water % in water/ethanol mixture), and "pressure" (P) on TPC, DPPH, and FRAP of the F. spiralis extracts. In general, higher TPC content and higher antioxidant capacity (lower IC50 and higher FRAP) were obtained with higher R, t, and P, and lower S (higher ethanol %). The model regarding the combined effects of independent variables t, R, and S on the FRAP response values for vortex-assisted extractions best fitted the experimental data (R2 0.957), with optimal extraction conditions of t = 300 s, R = 50 g, and S = 25%.

Sustainable strategies for using natural extracts in smart food packaging

The growing demand for sustainable and eco-friendly food packaging has prompted research on innovative solutions to environmental and consumer health issues. To enhance the properties of smart packaging, the incorporation of bioactive compounds derived from various natural sources has attracted considerable interest because of their functional properties, including antioxidant and antimicrobial effects. However, extracting these compounds from natural sources poses challenges because of their complex chemical structures and low concentrations. Traditional extraction methods are often environmentally harmful, expensive and time-consuming. Thus, green extraction techniques have emerged as promising alternatives, offering sustainable and eco-friendly approaches that minimise the use of hazardous solvents and reduce environmental impact. This review explores cutting-edge research on the green extraction of bioactive compounds and their incorporation into smart packaging systems in the last 10 years. Then, an overview of bioactive compounds, green extraction techniques, integrated techniques, green extraction solvents and their application in smart packaging was provided, and the impact of bioactive compounds incorporated in smart packaging on the shelf lives of food products was explored. Furthermore, it highlights the challenges and opportunities within this field and presents recommendations for future research, aiming to contribute to the advancement of sustainable and efficient smart packaging solutions.

Antisolvent precipitation for the synergistic preparation of ultrafine particles of nobiletin under ultrasonication-homogenization and evaluation of the inhibitory effects of α-glucosidase and porcine pancreatic lipase in vitro

To further enhance the application of nobiletin (an important active ingredient in Citrus fruits), we used ultrasonic homogenization-assisted antisolvent precipitation to create ultrafine particles of nobiletin (UPN). DMSO was used as the solvent, and deionized water was used as the antisolvent. When ultrasonication (670 W) and homogenization (16000 r/min) were synergistic, the solution concentration was 57 mg/mL, and the minimum particle size of UPN was 521.02 nm. The UPN samples outperformed the RN samples in terms of the inhibition of porcine pancreatic lipase, which was inhibited (by 500 mg/mL) by 68.41 % in the raw sample, 90.34 % in the ultrafine sample, and 83.59 % in the positive control, according to the data. Fourier transform infrared spectroscopy analysis revealed no chemical changes in the samples before or after preparation. However, the crystallinity of the processed ultrafine nobiletin particles decreased. Thus, this work offers significant relevance for applications in the realm of food chemistry and indirectly illustrates the expanded application potential of nobiletin.

Nutraceutical and Medicinal Importance of Marine Molluscs

Marine molluscs are of enormous scientific interest due to their astonishing diversity in terms of their size, shape, habitat, behaviour, and ecological roles. The phylum Mollusca is the second most common animal phylum, with 100,000 to 200,000 species, and marine molluscs are among the most notable class of marine organisms. This work aimed to show the importance of marine molluscs as a potential source of nutraceuticals as well as natural medicinal drugs. In this review, the main classes of marine molluscs, their chemical ecology, and the different techniques used for the extraction of bioactive compounds have been presented. We pointed out their nutraceutical importance such as their proteins, peptides, polysaccharides, lipids, polyphenolic compounds pigments, marine enzymes, minerals, and vitamins. Their pharmacological activities include antimicrobial, anticancer, antioxidant, anti-inflammatory, and analgesic activities. Moreover, certain molluscs like abalones and mussels contain unique compounds with potential medicinal applications, ranging from wound healing to anti-cancer effects. Understanding the nutritional and therapeutic value of marine molluscs highlights their significance in both pharmaceutical and dietary realms, paving the way for further research and utilization in human health.

Innovative Bioactive Products with Medicinal Value from Microalgae and Their Overall Process Optimization through the Implementation of Life Cycle Analysis-An Overview

Microalgae are being recognized as valuable sources of bioactive chemicals with important medical properties, attracting interest from multiple industries, such as food, feed, cosmetics, and medicines. This review study explores the extensive research on identifying important bioactive chemicals from microalgae, and choosing the best strains for nutraceutical manufacturing. It explores the most recent developments in recovery and formulation strategies for creating stable, high-purity, and quality end products for various industrial uses. This paper stresses the significance of using Life Cycle Analysis (LCA) as a strategic tool with which to improve the entire process. By incorporating LCA into decision-making processes, researchers and industry stakeholders can assess the environmental impact, cost-effectiveness, and sustainability of raw materials of several approaches. This comprehensive strategy will allow for the choosing of the most effective techniques, which in turn will promote sustainable practices for developing microalgae-based products. This review offers a detailed analysis of the bioactive compounds, strain selection methods, advanced processing techniques, and the incorporation of LCA. It will serve as a valuable resource for researchers and industry experts interested in utilizing microalgae for producing bioactive products with medicinal properties.

Algal carbohydrate polymers: Catalytic innovations for sustainable development

Algal polysaccharides, harnessed for their catalytic potential, embody a compelling narrative in sustainable chemistry. This review explores the complex domains of algal carbohydrate-based catalysis, revealing its diverse trajectory. Starting with algal polysaccharide synthesis and characterization methods as catalysts, the investigation includes sophisticated techniques like NMR spectroscopy that provide deep insights into the structural variety of these materials. Algal polysaccharides undergo various preparation and modification techniques to enhance their catalytic activity such as immobilization. Homogeneous catalysis, revealing its significance in practical applications like crafting organic compounds and facilitating chemical transformations. Recent studies showcase how algal-derived catalysts prove to be remarkably versatile, showcasing their ability to customise reactions for specific substances. Heterogeneous catalysis, it highlights the significance of immobilization techniques, playing a central role in ensuring stability and the ability to reuse catalysts. The practical applications of heterogeneous algal catalysts in converting biomass and breaking down contaminants, supported by real-life case studies, emphasize their effectiveness. In sustainable chemistry, algal polysaccharides emerge as compelling catalysts, offering a unique intersection of eco-friendliness, structural diversity, and versatile catalytic properties. Tackling challenges such as dealing with complex structural variations, ensuring the stability of the catalyst, and addressing economic considerations calls for out-of-the-box and inventive solutions. Embracing the circular economy mindset not only assures sustainable catalyst design but also promotes efficient recycling practices. The use of algal carbohydrates in catalysis stands out as a source of optimism, paving the way for a future where chemistry aligns seamlessly with nature, guiding us toward a sustainable, eco-friendly, and thriving tomorrow. This review encapsulates-structural insights, catalytic applications, challenges, and future perspectives-invoking a call for collective commitment to catalyze a sustainable scientific revolution.

Combined effect of ultrasound and vacuum impregnation for the modification of apple tissue enriched with aloe vera juice

The aim of the work was to investigate how ultrasonic (US) treatment impacts on the physical and chemical properties of vacuum-impregnated apples. Apple slices were subjected to vacuum impregnation (VI) in an Aloe vera juice solution without additional treatments, serving as the reference material. Alternatively, ultrasound (US) treatments, at frequencies of 25 or 45 kHz, and durations of 10, 20, or 30 min, were employed as a pre-treatments before the VI process. The use of US processing enabled a significant increase in the efficiency of VI, without influencing in a significant way the color of the VI samples. The VI process led to a reduction in the content of bioactive compounds, in particular vitamin C and TPC decreased by 34 and 32 %, respectively. The use of US as a pre-treatment, in particular at 45 kHz for 20 or 30 min, led to a better preservation of these compounds (unchanged values for vitamin C and decrease by 23-26 % for TPC in comparison to the fresh samples). Through cluster analysis encompassing all assessed properties, it was evident that US treatment was beneficial for the processing, however the application of appropriate parameters of US treatment (frequency and time) had an impact on achieving similar quality to VI samples. The ultrasound treatment before vacuum impregnation may be suitable, however, the specific processing parameters should be defined for the obtained high quality of the final product.

Ultrasound assisted extraction of amino acids and nucleobases from clay minerals and astrobiological samples

The study of organic molecules in meteorite and return samples allows for the understanding of the chemistry that undergoes in our Solar System. The present work aims at studying ultrasound assisted extraction technique as effective extraction method for these molecules in extraterrestrial samples and analogs. Optimal conditions were selected from the investigation of ultrasonic frequency, irradiation duration and solvent effects on amino acids, nucleobases and dipeptides extraction yields from a model clay-rich mineral matrix. Optimal ultrasound-assisted extraction parameters were frequency of 20 kHz within 20 min irradiation time and methanol/water solvent ratio of 1. We then validated this protocol on Mukundpura and Tarda meteorite fragments and compared it to the reference extraction protocol used in astrobiology and based on 24 h extraction time at 100 °C in water We obtained similar quantitative results without any racemization with both methodologies.

Enzyme-Assisted Coextraction of Phenolics and Polysaccharides from Padina gymnospora

Brown seaweed is a promising source of polysaccharides and phenolics with industrial utility. This work reports the development of a green enzyme-assisted extraction method for simultaneously extracting polysaccharides and phenolics from the brown seaweed Padina gymnospora. Different enzymes (Cellulast, Pectinex, and Alcalase), individually and in combination, were investigated, with Alcalase alone showing the highest efficiency for the simultaneous extraction of polysaccharides and phenolics. Yields from Alcalase-assisted aqueous extraction were higher than those obtained using either water alone or conventional ethanol extraction. Alcalase-assisted extraction was subsequently optimized using a response surface methodology to maximize compound recovery. Maximal polysaccharide and phenolic recovery was obtained under the following extraction conditions: a water-to-sample ratio of 61.31 mL/g, enzyme loading of 0.32%, temperature of 60.5 °C, and extraction time of 1.95 h. The extract was then fractionated to obtain alginate-, fucoidan-, and phenolic-rich fractions. Fractions exhibited potent 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity with IC50 values of 140.55 µg/mL, 126.21 µg/mL, and 48.17 µg/mL, respectively, which were higher than those obtained from conventional extraction methods. The current work shows that bioactive polysaccharides and phenolics can be obtained together in high yield through a single aqueous-only green and efficient Alcalase-assisted extraction.

Methods for Extracting Immune-Response Modulating Agents of Plant Origin

Numerous adverse factors may violate the human immune system and trigger various diseases. Immune-response modulating agents, or immunomodulators, help the immune system to function properly. Biologically active substances extracted from medicinal plants are especially promising in this respect. The article reviews traditional and novel methods for extracting biologically active immune-response modulating agents from plant raw materials. The review covered articles published in English and Russian in 2019–2023 and indexed in Scopus, Web of Science, and eLIBRARY. Extraction efficiency depends on such factors as solvent, temperature, and particle size, but the method is the most important one. Traditional extraction methods include percolation, maceration, Soxhlet extraction, heat reflux extraction, and decoction. However, they are solvent-consuming and expensive. Modern extraction methods rely on carbon dioxide, microwave treatment, ultrasonic processing, and pressure. They proved quite efficient in extracting biologically active substances from ginseng (Panax ginseng). Carbon dioxide, or supercritical, extraction was able to isolate polyphenol quercetin from quince fruit (Cydonia oblonga) and other biologically active substances from alfalfa (Medicago sativa). Maceration with methanol was applied to meadowsweet (Filipendula ulmaria) while Soxhlet extraction proved especially effective with smoke tree (Cotinus coggygria), moorland spotted orchid (Dactylorhiza maculata), and greater butterfly-orchid (Platanthera chlorantha). Both traditional and novel extraction methods find their application in medicine and food science, where they yield plant extracts of biologically active immune-response modulating agents.

Recent Advances in the Extraction of Pectin from Various Sources and Industrial Applications

Pectin is a structural polysaccharide present in plants that primarily consists of galacturonic acid units. This Review discusses the chemistry of pectin, including its composition and molecular weight. Pectin is conventionally extracted from agricultural waste (fruit and vegetable peels) using an acidic or basic aqueous medium at high temperatures. These processes are time- and energy-consuming and also result in severe environmental problems due to the production of acidic effluents and equipment corrosion. As pectin usage is increasing in food industries for developing different products and it is also used as an excipient in pharmaceutical products, better extraction procedures are required to maximize the yield and purity. The Review encompasses various alternate green approaches for the extraction of pectin, including traditional acid extraction and various emerging technologies such as deep eutectic solvent-based extraction, enzyme-assisted extraction, subcritical fluid extraction, ultrasound-assisted extraction, and microwave-based extraction, and evaluates the yield and physicochemical characteristics of the extracted pectin. This work aims to provide a platform for attracting more thorough research focused on the engineering of novel and more efficient green methods for the extraction of pectin and its utilization for various biotechnological purposes.

A comprehensive review of ultrasonic assisted extraction (UAE) for bioactive components: Principles, advantages, equipment, and combined technologies

The increasing focus on health and well-being has sparked a rising interest in bioactive components in the food, pharmaceutical, and nutraceutical industries. These components are gaining popularity due to their potential benefits for overall health. The growing interest has resulted in a continuous rise in demand for bioactive components, leading to the exploration of both edible and non-edible sources to obtain these valuable substances. Traditional extraction methods like solvent extraction, distillation, and pressing have certain drawbacks, including lower extraction efficiency, reduced yield, and the use of significant amounts of solvents or resources. Furthermore, certain extraction methods necessitate high temperatures, which can adversely affect certain bioactive components. Consequently, researchers are exploring non-thermal technologies to develop environmentally friendly and efficient extraction methods. Ultrasonic-assisted extraction (UAE) is recognized as an environmentally friendly and highly efficient extraction technology. The UAE has the potential to minimize or eliminate the need for organic solvents, thereby reducing its impact on the environment. Additionally, UAE has been found to significantly enhance the production of target bioactive components, making it an attractive method in the industry. The emergence of ultrasonic assisted extraction equipment (UAEE) has presented novel opportunities for research in chemistry, biology, pharmaceuticals, food, and other related fields. However, there is still a need for further investigation into the main components and working modes of UAEE, as current understanding in this area remains limited. Therefore, additional research and exploration are necessary to enhance our knowledge and optimize the application of UAEE. The core aim of this review is to gain a comprehensive understanding of the principles, benefits and impact on bioactive components of UAE, explore the different types of equipment used in this technique, examine the various working modes and control parameters employed in UAE, and provide a detailed overview of the blending of UAE with other emerging extraction technologies. In conclusion, the future development of UAEE is envisioned to focus on achieving increased efficiency, reduced costs, enhanced safety, and improved reliability. These key areas of advancement aim to optimize the performance and practicality of UAEE, making it a more efficient, cost-effective, and reliable extraction technology.

Characterization of Sodium Alginate-Based Films Blended with Olive Leaf and Laurel Leaf Extracts Obtained by Ultrasound-Assisted Technology

Due to environmental concerns, there is an increasing need to reduce the use of synthetic and non-renewable packaging materials to reduce waste and increase sustainability. This study aimed to characterise sodium alginate edible-based films (SA) incorporated with laurel leaf extract (LLE) and olive leaf extract (OLE) obtained by ultrasound-assisted extraction. Determination of total phenolic content, antioxidant, and antimicrobial activity was performed for the extracts and films. Also, thickness, tensile strength, elongation at break, modulus of elasticity, opacity and colour, moisture content, water vapour permeability (WVP), Fourier-transform infrared spectroscopy (FTIR) spectra, and surface morphology by scanning electron microscope (SEM) analyses were performed for the films. LLE yielded better results in terms of phenolic content (195 mg GAE/g), antioxidant (2.1 TE/g extract) and antimicrobial activity (MIC at 1% for Listeria monocytogenes and Staphylococcus aureus, and 1.8% for Enterococcus faecalis). For the films, the simultaneous incorporation of LLE 1% (w/v) and OLE 1% (w/v) resulted in a significant reduction of approximately 2 log CFU/g against S. aureus. The addition of LLE and OLE extracts also proved to improve barrier properties (lower WVP for SA films with LLE 1% + OLE 1%, 3.49 × 10-11 g m-1 s-1 Pa-1) and promoted changes in resistance and flexibility. The results demonstrated that active alginate-based films can be valuable for enhancing food preservation.

Factors Affecting the Extraction of (Poly)Phenols from Natural Resources Using Deep Eutectic Solvents Combined with Ultrasound-Assisted Extraction

Replacing conventional solvents with deep eutectic solvents (DES) has shown promising effects on the extraction yield of (poly)phenols. DES can be combined with ultrasound-assisted extraction (UAE) to further increase the extraction efficiency of (poly)phenols from natural resources compared to conventional methods. This review discusses the factors associated with DES (composition, solvent-to-sample ratio, extraction duration, and temperature) and UAE (ultrasound frequency, power, intensity, and duty cycle) methods that influence the extraction of (poly)phenols and informs future improvements required in the optimization of the extraction process. For the optimum (poly)phenol extraction from natural resources, the following parameters shall be considered: ultrasound frequency should be in the range of 20-50 kHz, ultrasound intensity in the range of 60-120 W/cm2, ultrasound duty cycle in the range of 40-80%, ultrasound duration for 10-30 minutes, and ultrasound temperature for 25-50 °C. Among the reported DES systems, choline chloride with glycerol or lactic acid, with a solvent-to-sample mass ratio of 10-30:1 shown to be effective. The solvent composition and solvent-to-sample mass ratio should be selected according to the target compound and the source material. However, the high viscosity of DES is among the major limitations. Optimizing these factors can help to increase the yield of extracted (poly)phenols and their applications.

Enzyme-Assisted Extraction of Ulvan from the Green Macroalgae Ulva fenestrata

Ulvan is a sulfated polysaccharide extracted from green macroalgae with unique structural and compositional properties. Due to its biocompatibility, biodegradability, and film-forming properties, as well as high stability, ulvan has shown promising potential as an ingredient of biopolymer films such as sustainable and readily biodegradable biomaterials that could replace petroleum-based plastics in diverse applications such as packaging. This work investigates the potential of Ulva fenestrata as a source of ulvan. Enzyme-assisted extraction with commercial cellulases (Viscozyme L and Cellulysin) and proteases (Neutrase 0.8L and Flavourzyme) was used for cell wall disruption, and the effect of the extraction time (3, 6, 17, and 20 h) on the ulvan yield and its main characteristics (molecular weight, functional groups, purity, and antioxidant capacity) were investigated. Furthermore, a combined process based on enzymatic and ultrasound extraction was performed. Results showed that higher extraction times led to higher ulvan yields, reaching a maximum of 14.1% dw with Cellulysin after 20 h. The combination of enzymatic and ultrasound-assisted extraction resulted in the highest ulvan extraction (17.9% dw). The relatively high protein content in U. fenestrata (19.8% dw) makes the residual biomass, after ulvan extraction, a potential protein source in food and feed applications.

Advances in Natural Product Extraction Techniques, Electrospun Fiber Fabrication, and the Integration of Experimental Design: A Comprehensive Review

The present review explores the growing interest in the techniques employed for extracting natural products. It emphasizes the limitations of conventional extraction methods and introduces superior non-conventional alternatives, particularly ultrasound-assisted extraction. Characterization and quantification of bioactive constituents through chromatography coupled with spectroscopy are recommended, while the importance of method development and validation for biomarker quantification is underscored. At present, electrospun fibers provide a versatile platform for incorporating bioactive extracts and have extensive potential in diverse fields due to their unique structural and functional characteristics. Thus, the review also highlights the fabrication of electrospun fibers containing bioactive extracts. The preparation of biologically active extracts under optimal conditions, including the selection of safe solvents and cost-effective equipment, holds promising potential in the pharmaceutical, food, and cosmetic industries. Integration of experimental design into extraction procedures and formulation development is essential for the efficient production of health products. The review explores potential applications of encapsulating natural product extracts in electrospun fibers, such as wound healing, antibacterial activity, and antioxidant properties, while acknowledging the need for further exploration and optimization in this field. The findings discussed in this review are anticipated to serve as a valuable resource for the processing industry, enabling the utilization of affordable and environmentally friendly, natural, and raw materials.

Emerging Technologies to Extract Fucoxanthin from Undaria pinnatifida: Microwave vs. Ultrasound Assisted Extractions

Macroalgae are an extensive resource for the obtention of bioactive compounds, mainly phenolic compounds, phlorotannins, and pigments. Fucoxanthin (Fx) is the most abundant pigment present in brown algae and has shown several useful bioactivities that can be used to fortify products in the food and cosmetic industries. Nevertheless, to date, there is still insufficient literature reporting on the extraction yield of Fx from U. pinnatifida species from green technologies. In this regard, the present study aims to optimize the extraction conditions to obtain the highest Fx yield from U. pinnatifida through emerging techniques, namely microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE). These methods will be compared with the conventional methodologies of heat-assisted extraction (HAE) and Soxhlet-assisted extraction (SAE). According to our results, even though the extraction yield could be slightly higher when using MAE than UAE, the Fx concentration obtained from the alga was double when using UAE. Thus, the Fx ratio in the final extract reached values of 124.39 mg Fx/g E. However, the optimal conditions should also be considered since UAE needed 30 min to perform the extraction, whereas MAE was able to obtain 58.83 mg Fx/g E in only 3 min and 2 bar, meaning less energy expenditure and minimum cost function. To our knowledge, this study obtains the highest concentrations of Fx ever reported (58.83 mg Fx/g E for MAE and 124.39 mg Fx/g E for UAE), with low energy consumption and short times (3.00 min for MAE and 35.16 min for UAE). Any of these results could be selected for further experiments and proposed for industrial scaling-up.

Agro-Food Waste as an Ingredient in Functional Beverage Processing: Sources, Functionality, Market and Regulation

Waste generated from the agro-food industry represents a concerning environmental, social and economic issue. The Food and Agriculture Organization of the United Nations defines food waste as all food that decreases in quantity or quality to the extent that it is thrown out by food service providers and consumers. The FAO reports that 17% of worldwide food production may be wasted. Food waste may include fresh products, food close to the expiration date discarded by retailers and food products from household kitchens and eating establishments. However, food waste offers different possibilities to extract functional ingredients from different sources, such as dairy, cereals, fruits, vegetables, fibers, oils, dye and bioactive compounds. The optimization of agro-food waste as an ingredient will help in the development and innovation of food products to generate functional food and beverages to prevent and treat several diseases in consumers.

Optimization of the Extraction Conditions of Antioxidant Phenolic Compounds from Strawberry Fruits (Fragaria x ananassa Duch.) Using Response Surface Methodology

The subject of this study is to determine the best solvent and optimum extraction conditions for the extraction of maximum antioxidant phenolic compounds and antioxidant activity from strawberry fruits (Fragaria x ananassa Duch.). Extractions were carried out using solvents with different polarities (water, methanol, ethanol, acetonitrile, and acetone). Box-Behnken Design was used to optimize extraction conditions, including extraction time (t), temperature (°C), and liquid/solid (L/S) ratio. In the study, extracts obtained with acetone indicated the highest total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity. The optimal extraction conditions for both responses were determined to be time of 17.5 min, temperature 52.5 °C, and liquid/solid ratio of 30:1. The maximum TPC and TFC values were found as 18.78 ± 0.22 mg of gallic acid equivalent (GAE/g) and 10.52 ± 0.35 mg of catechin equivalents (CE/g) under optimum extraction conditions. The results indicated that optimizing extraction conditions is critical for quantifying antioxidant phenolic compounds. The present model can contribute to finding a cheap way of delivering natural antioxidants in the food, cosmeceutical, and pharmaceutical industries. Furthermore, these results indicate that strawberry fruits (Fragaria x ananassa Duch.) can be a natural food colorant in dietary applications with potential health benefits.

Optimization of R-Phycoerythrin Extraction by Ultrasound-Assisted Enzymatic Hydrolysis: A Comprehensive Study on the Wet Seaweed Grateloupia turuturu

Enzyme-assisted extraction (EAE) and ultrasound-assisted extraction (UAE) are both recognized as sustainable processes, but little has been done on the combined process known as ultrasound-assisted enzymatic hydrolysis (UAEH), and even less on seaweed. The present study aimed to optimize the UAEH of the red seaweed Grateloupia turuturu for the extraction of R-phycoerythrin (R-PE) directly from the wet biomass by applying a response surface methodology based on a central composite design. Three parameters were studied: the power of ultrasound, the temperature and the flow rate in the experimental system. Data analysis demonstrated that only the temperature had a significant and negative effect on the R-PE extraction yield. Under the optimized conditions, the R-PE kinetic yield reached a plateau between 90 and 210 min, with a yield of 4.28 ± 0.09 mg·g−1 dry weight (dw) at 180 min, corresponding to a yield 2.3 times higher than with the conventional phosphate buffer extraction on freeze-dried G. turuturu. Furthermore, the increased release of R-PE, carbohydrates, carbon and nitrogen can be associated with the degradation of G. turuturu constitutive polysaccharides, as their average molecular weights had been divided by 2.2 in 210 min. Our results thus demonstrated that an optimized UAEH is an efficient method to extract R-PE from wet G. turuturu without the need for expensive pre-treatment steps found in the conventional extraction. UAEH represents a promising and sustainable approach that should be investigated on biomasses where the recovery of added-value compounds needs to be improved.

Pressurized Liquid Extraction for the Recovery of Bioactive Compounds from Seaweeds for Food Industry Application: A Review

Seaweeds are an underutilized food in the Western world, but they are widely consumed in Asia, with China being the world’s larger producer. Seaweeds have gained attention in the food industry in recent years because of their composition, which includes polysaccharides, lipids, proteins, dietary fiber, and various bioactive compounds such as vitamins, essential minerals, phenolic compounds, and pigments. Extraction techniques, ranging from more traditional techniques such as maceration to novel technologies, are required to obtain these components. Pressurized liquid extraction (PLE) is a green technique that uses high temperatures and pressure applied in conjunction with a solvent to extract components from a solid matrix. To improve the efficiency of this technique, different parameters such as the solvent, temperature, pressure, extraction time and number of cycles should be carefully optimized. It is important to note that PLE conditions allow for the extraction of target analytes in a short-time period while using less solvent and maintaining a high yield. Moreover, the combination of PLE with other techniques has been already applied to extract compounds from different matrices, including seaweeds. In this way, the combination of PLE-SFE-CO2 seems to be the best option considering both the higher yields obtained and the economic feasibility of a scaling-up approximation. In addition, the food industry is interested in incorporating the compounds extracted from edible seaweeds into food packaging (including edible coating, bioplastics and bio-nanocomposites incorporated into bioplastics), food products and animal feed to improve their nutritional profile and technological properties. This review attempts to compile and analyze the current data available regarding the application of PLE in seaweeds to determine the use of this extraction technique as a method to obtain active compounds of interest for food industry application.

Bioactive Compounds of Verbascum sinuatum L.: Health Benefits and Potential as New Ingredients for Industrial Applications

Verbascum sinuatum (V. sinuatum) is a plant belonging to the Scrophulariaceae family that has been used as an ingredient in traditional medicine infusions for the treatment of many diseases. The aerial part of this plant is a source of bioactive compounds, especially polyphenols and iridoids. Moreover, antioxidant activity studies have shown that V. sinuatum phenolic and flavonoid composition is higher than those in other plants of the same genus. V. sinuatum bioactive compound composition could vary according to the harvesting location, growing conditions of the plants, sample preparation methods, type and concentration of the extraction solvent, and the extraction methods. The obtention of these compounds can be achieved by different extraction techniques, most commonly, maceration, heat assisted extraction, and infusion. Nevertheless, since conventional extraction techniques have several drawbacks such as long times of extraction or use of large amounts of solvents, the use of green extraction techniques is suggested, without affecting the efficiency of the extraction. Moreover, V. sinuatum bioactive compounds have several biological activities, such as antioxidant, anticancer, cardiovascular, antimicrobial, antidiabetic, and neuroprotective activities, that may be increased by encapsulation. Since the bioactive compounds extracted from V. sinuatum present good potential as functional food ingredients and in the development of drugs or cosmetics, this review gives an approach of the possible incorporation of these compounds in the food and pharmacological industries.

Bioprospecting of Targeted Phenolic Compounds of Dictyota dichotoma, Gongolaria barbata, Ericaria amentacea, Sargassum hornschuchii and Ellisolandia elongata from the Adriatic Sea Extracted by Two Green Methods

The content of bioactive compounds in four brown and one red algae from the Adriatic Sea (Dictyota dichotoma, Gongolaria barbata, Ericaria amentacea, Sargassum hornschuchii and Ellisolandia elongata) is explored. The efficiency of two different extraction methods viz. ultrasound-assisted extraction (UAE) and matrix solid-phase dispersion (MSPD) to obtain the extracts rich in phenolic compounds was compared. The effect of the extraction solvent to modulate the phenolic profile was assessed. In general, the mixture ethanol/water in an isovolumetric proportion showed the best results. The total phenolic content (TPC) and antioxidant activity (AA), as well as the individual polyphenolic profile, were evaluated for five target algae. TPC values ranged between 0.2 mg GAE/g (for E. elongata) and 38 mg GAE/g (for S. hornschuchii). Regarding the quantification of individual polyphenols by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis, the presence of a high number of hydroxybenzoic acid derivatives (mainly of 3- and 4-hydroxybenzoic acids) in all species was noted. In G. barbata their concentrations reached up to 500 mg/kg. IC50 values (ABTS assay) ranged between 44 mg/L (for S. hornschuchii) and 11,040 mg/L (for E. elongata). This work contributes to the in-depth characterization of these little-explored algae, showing their potential as a natural source of phenolic compounds.

Major Phytochemicals: Recent Advances in Health Benefits and Extraction Method

Recent scientific studies have established a relationship between the consumption of phytochemicals such as carotenoids, polyphenols, isoprenoids, phytosterols, saponins, dietary fibers, polysaccharides, etc., with health benefits such as prevention of diabetes, obesity, cancer, cardiovascular diseases, etc. This has led to the popularization of phytochemicals. Nowadays, foods containing phytochemicals as a constituent (functional foods) and the concentrated form of phytochemicals (nutraceuticals) are used as a preventive measure or cure for many diseases. The health benefits of these phytochemicals depend on their purity and structural stability. The yield, purity, and structural stability of extracted phytochemicals depend on the matrix in which the phytochemical is present, the method of extraction, the solvent used, the temperature, and the time of extraction.