Combined enzymatic and mechanical cell disruption and lipid extraction of green alga Neochloris oleoabundans

Neochloris oleoabundans cell wall rupture through melittin peptide: a new approach to increase lipid recovery

OBJECTIVES

Microalgae cell wall affects the recovery of lipids, representing one of the main difficulties in the development of biofuel production. This work aimed to test a new method based on melittin peptide to induce a cellular disruption in N. oleoabundans.

RESULTS

Neochloris oleoabundans cells were grown at 32 °C in the presence of a high concentration of nitrate-phosphate, causing a cell disruption extent of 83.6%. Further, a two-fold increase in lipid recovery following melittin treatment and solvent extraction was observed. Additionally, it was possible to verify the effects of melittin, both before and after treatment on the morphology of the cells. Scanning electron microscopy (SEM) and confocal images of the melittin-treated microalgae revealed extensive cell damage with degradation of the cell wall and release of intracellular material.

CONCLUSIONS

Melittin produced a selective cell wall rupture effect in N. oleoabundans under some culture conditions. These results represent the first report on the effect of melittin on lipid recovery from microalgae.

Extraction methods of algae oils for the production of third generation biofuels - A review

Microalgae are the main source of third-generation biofuels because they have a lipid content of 20-70%, can be abundantly produced and do not compete in the food market besides other benefits. Biofuel production from microalgae is a promising option to contribute for the resolution of the eminent crisis of fossil energy and environmental pollution specially in the transporting sector. The choice of lipid extraction method is of relevance and associated to the algae morphology (i.e., rigid cells). Therefore, it is essential to develop suitable extraction technologies for economically viable and environment-friendly lipid recovery processes with the aim of achieving a commercial production of biofuels from this biomass. This review presents an exhaustive analysis and discussion of different methods and processes of lipid extraction from microalgae for the subsequent conversion to biodiesel. Physical methods based on the use of supercritical fluids, ultrasound and microwaves were reviewed. Chemical methods using solvents with different polarities, aside from mechanical techniques such as mechanical pressure and enzymatic methods, were also analyzed. The advantages, drawbacks, challenges and future prospects of lipid extraction methods from microalgae have been summarized to provide a wide panorama of this relevant topic for the production of economic and sustainable energy worldwide.

Development of sustainable downstream processing for nutritional oil production

Nutritional oils (mainly omega-3 fatty acids) are receiving increased attention as critical supplementary compounds for the improvement and maintenance of human health and wellbeing. However, the predominant sources of these oils have historically shown numerous limitations relating to desirability and sustainability; hence the crucial focus is now on developing smarter, greener, and more environmentally favourable alternatives. This study was undertaken to consider and assess the numerous prevailing and emerging techniques implicated across the stages of fatty acid downstream processing. A structured and critical comparison of the major classes of disruption methodology (physical, chemical, thermal, and biological) is presented, with discussion and consideration of the viability of new extraction techniques. Owing to a greater desire for sustainable industrial practices, and a desperate need to make nutritional oils more available; great emphasis has been placed on the discovery and adoption of highly sought-after 'green' alternatives, which demonstrate improved efficiency and reduced toxicity compared to conventional practices. Based on these findings, this review also advocates new forays into application of novel nanomaterials in fatty acid separation to improve the sustainability of nutritional oil downstream processing. In summary, this review provides a detailed overview of the current and developing landscape of nutritional oil; and concludes that adoption and refinement of these sustainable alternatives could promptly allow for development of a more complete 'green' process for nutritional oil extraction; allowing us to better meet worldwide needs without costing the environment.

A potential paradigm in CRISPR/Cas systems delivery: at the crossroad of microalgal gene editing and algal-mediated nanoparticles

Microalgae as the photosynthetic organisms offer enormous promise in a variety of industries, such as the generation of high-value byproducts, biofuels, pharmaceuticals, environmental remediation, and others. With the rapid advancement of gene editing technology, CRISPR/Cas system has evolved into an effective tool that revolutionised the genetic engineering of microalgae due to its robustness, high target specificity, and programmability. However, due to the lack of robust delivery system, the efficacy of gene editing is significantly impaired, limiting its application in microalgae. Nanomaterials have become a potential delivery platform for CRISPR/Cas systems due to their advantages of precise targeting, high stability, safety, and improved immune system. Notably, algal-mediated nanoparticles (AMNPs), especially the microalgae-derived nanoparticles, are appealing as a sustainable delivery platform because of their biocompatibility and low toxicity in a homologous relationship. In addition, living microalgae demonstrated effective and regulated distribution into specified areas as the biohybrid microrobots. This review extensively summarised the uses of CRISPR/Cas systems in microalgae and the recent developments of nanoparticle-based CRISPR/Cas delivery systems. A systematic description of the properties and uses of AMNPs, microalgae-derived nanoparticles, and microalgae microrobots has also been discussed. Finally, this review highlights the challenges and future research directions for the development of gene-edited microalgae.

Production of secondary metabolites using tissue culture-based biotechnological applications

Plants are the sources of many bioactive secondary metabolites which are present in plant organs including leaves, stems, roots, and flowers. Although they provide advantages to the plants in many cases, they are not necessary for metabolisms related to growth, development, and reproduction. They are specific to plant species and are precursor substances, which can be modified for generations of various compounds in different plant species. Secondary metabolites are used in many industries, including dye, food processing and cosmetic industries, and in agricultural control as well as being used as pharmaceutical raw materials by humans. For this reason, the demand is high; therefore, they are needed to be obtained in large volumes and the large productions can be achieved using biotechnological methods in addition to production, being done with classical methods. For this, plant biotechnology can be put in action through using different methods. The most important of these methods include tissue culture and gene transfer. The genetically modified plants are agriculturally more productive and are commercially more effective and are valuable tools for industrial and medical purposes as well as being the sources of many secondary metabolites of therapeutic importance. With plant tissue culture applications, which are also the first step in obtaining transgenic plants with having desirable characteristics, it is possible to produce specific secondary metabolites in large-scale through using whole plants or using specific tissues of these plants in laboratory conditions. Currently, many studies are going on this subject, and some of them receiving attention are found to be taken place in plant biotechnology and having promising applications. In this work, particularly benefits of secondary metabolites, and their productions through tissue culture-based biotechnological applications are discussed using literature with presence of current studies.

Solid-state fermentation-based enzyme-assisted extraction of eicosapentaenoic acid-rich oil from Nannochloropsis sp

Enzymatic treatment of microalgal biomass is a promising approach for extraction of microalgal lipid, but high cost of commercially sourcing enzyme is a major drawback in industrial implementation. Present study involves extraction of eicosapentaenoic acid-rich oil from Nannochloropsis sp. biomass using low cost cellulolytic enzymes produced from Trichoderma reesei in a solid-state fermentation bioreactor. Maximum total fatty acid recovery of 369.4 ± 4.6 mg/g dry weight (total fatty acid yield of 77%) was achieved in 12 h from the enzymatically treated microalgal cells, of which the eicosapentaenoic acid content was 11%. Sugar release of 1.70 ± 0.05 g/L was obtained post enzymatic treatment at 50 °C. The enzyme was reused thrice for cell wall disruption without compromising on total fatty acid yield. Additionally, high protein content of 47% in the defatted biomass could be explored as a potential aquafeed, thus enhancing the overall economics and sustainability of the process.

Calcium Carbonate Mineralization of Microalgae

Biological substrates catalyze the nucleation and growth of sparingly soluble salts however, the underlying mechanism is largely unknown. In the present study, the growth of calcium carbonate (CaCO3), on Acutodesmus obliquus (AO) microalgae was investigated. The test microalgae favored the growth of CaCO3 from solutions supersaturated with respect to calcite (7.94 < SRcalcite < 104.71). The precipitation of calcite on AO was not preceded by measurable induction times, and the rates of calcite crystal growth were higher for higher microalgae cell concentrations. The presence of the microalgae cultivation medium and illumination of the supersaturated solutions accelerated the precipitation of CaCO3, increasing the rate by 75% in comparison with the respective value in its absence. AO cultures, air dried at 25 °C yielded higher precipitation rates, in comparison with the respective rates in the presence of active AO cultures. At 70 °C, nucleation and growth were suppressed, due to the destruction of the molecular structure of the microalgae. The CaCO3 precipitation rates on calcite precipitated on air-dried AO culture, were doubled in comparison with the respective rates obtained with the respective quantities of each component of the composite substrate.

Ultrasound for microalgal cell disruption and product extraction: A review

Microalgae are a promising feedstock for the production of biofuels, nutraceuticals, pharmaceuticals and cosmetics, due to their superior capability of converting solar energy and CO₂ into lipids, proteins, and other valuable bioactive compounds. To facilitate the release of these important biomolecules from microalgae, effective cell disruption is usually necessary, where the use of ultrasound has gained tremendous interests as an alternative to traditional methods. This review not only summarizes the mechanisms of and operation parameters affecting cell disruption, but also takes an insight into measuring techniques, synergistic integration with other disruption methods, and challenges of ultrasonication for microalgal biorefining. Optimal conditions including ultrasonic frequency, intensity, and duration, and liquid viscosity and sonochemical reactor are the key factors for maximizing the disruption and extraction efficiency. A combination of ultrasound with other disruption methods such as ozonation, microwave, homogenization, enzymatic lysis, and solvents facilitates cell disruption and release of target compounds, thus provides powerful solutions to commercial scale-up of ultrasound extraction for microalgal biorefining. It is concluded that ultrasonication is a sustainable "green" process, but more research and work are needed to upscale this process without sacrificing performance or consuming more energy.

Recovering Microalgal Bioresources: A Review of Cell Disruption Methods and Extraction Technologies

Microalgae have evolved into a promising sustainable source of a wide range of compounds, including protein, carbohydrates, biomass, vitamins, animal feed, and cosmetic products. The process of extraction of intracellular composites in the microalgae industry is largely determined by the microalgal species, cultivation methods, cell wall disruption techniques, and extraction strategies. Various techniques have been applied to disrupt the cell wall and recover the intracellular molecules from microalgae, including non-mechanical, mechanical, and combined methods. A comprehensive understanding of the cell disruption processes in each method is essential to improve the efficiency of current technologies and further development of new methods in this field. In this review, an overview of microalgal cell disruption techniques and an analysis of their performance and challenges are provided. A number of studies on cell disruption and microalgae extraction are examined in order to highlight the key challenges facing the field of microalgae and their future prospects. In addition, the amount of product recovery for each species of microalgae and the important parameters for each technique are discussed. Finally, pulsed electric field (PEF)-assisted treatments, which are becoming an attractive option due to their simplicity and effectiveness in extracting microalgae compounds, are discussed in detail.

Investigation on Cell Disruption Techniques and Supercritical Carbon Dioxide Extraction of Mortierella alpina Lipid

Mortierella alpina, an oleaginous fungus, has been shown to be a potential source for arachidonic acid (ARA) production. The recovery of intracellular lipids from M. alpina is an important step for the downstream bioprocessing, and green extraction techniques with a focus on being efficient and eco-friendly have drawn much attention. In this study, different cell disruption techniques (mechanical: high-speed homogenization 10,000 rpm, ultrasonication 20 kHz, high-pressure process (HPP) 200–600 MPa; non- mechanical: acid treatment HCl) were investigated for lipid recovery from M. alpina, and process parameters (A. temperature, B. pressure, C. cosolvent ratio) of supercritical carbon dioxide (SC-CO₂) lipid extraction were studied by applying response surface methodology (RSM). Compared with Soxhlet extraction as a control group (100%), high-speed homogenization has the highest lipid recovery (115.40%) among mechanical disruption techniques. Besides, there was no significant difference between high-speed homogenization and 1 M HCl treatment (115.55%) in lipid recovery. However, lipid recovery decreased to 107.36% as the concentration of acid was increased to 3 M, and acid treatment showed a negative effect on the ARA ratio. In HPP treatment, the highest lipid recovery (104.81%) was obtained at 400 MPa, 1 time of treatment and water medium. In the response surface model of SC-CO₂ extraction, results showed the major influence of the process parameters to lipid recovery was pressure, and there are interaction effects of AC (temperature and cosolvent ratio) and BC (pressure and cosolvent ratio). Lipid recovery of SC-CO₂ extraction reached 92.86% at 201 bar, 58.9 °C and cosolvent ratio 1:15. The microbial lipid recovery process of this study could be used as a reference and an eco-friendly alternative for the future downstream bioprocessing of ARA production by M. alpina.

Biocomposites Using Whole or Valuable Component-Extracted Microalgae Blended with Polymers: A Review

Global demand for plastics has increased steadily alongside industrial development. Despite their versatility and convenience, environmental pollution caused by plastics are a major issue. With a reduction in the market size of plastics being seemingly impossible, bioplastics may become key to tackle this issue. Among a wide range of sources of bioplastics, microalgae have come into the limelight. While abundant and valuable components in microalgae have the potential to replace preexisting plastics, complex processes and low cost performances have prevented them from entering the market. In this study, we examined techniques for biocomposites in which polymers are blended with microalgae. We focused on microalgae-based biocomposite blending processed from the perspective of functionality and cost performance.

Culex quinquefasciatus larvae development arrested when fed on Neochloris aquatica

Culex quinquefasciatus is a cosmopolitan species widely distributed in the tropical and subtropical areas of the world. Due to its long history of close association with humans, the transmission of arboviruses and parasites have an important role in veterinary and public health. Adult females feed mainly on birds although they can also feed on humans and other mammals. On the other hand, larvae are able to feed on a great diversity of microorganisms, including microalgae, present in natural or artificial breeding sites with a high organic load. These two particularities, mentioned above, are some of the reasons why this mosquito is so successful in the environment. In this work, we report the identification of a microalga found during field sampling in artificial breeding sites, in a group of discarded tires with accumulated rainwater. Surprisingly, only one of them had a bright green culture without mosquito larvae while the other surrounding tires contained a large number of mosquito larvae. We isolated and identified this microorganism as Neochloris aquatica, and it was evaluated as a potential biological control agent against Cx. quinquefasciatus. The oviposition site preference in the presence of the alga by gravid females, and the effects on larval development were analyzed. Additionally, microalga effect on Cx. quinquefasciatus wild type, naturally infected with the endosymbiotic bacterium Wolbachia (w⁺) and Wolbachia free (w⁻) laboratory lines was explored. According to our results, even though it is chosen by gravid females to lay their eggs, the microalga had a negative effect on the development of larvae from both populations. Additionally, when the larvae were fed with a culture of alga supplemented with balanced fish food used as control diet, they were not able to reverse its effect, and were unable to complete development until adulthood. Here, N. aquatica is described as a biological agent, and as a potential source of bioactive compounds for the control of mosquito populations important in veterinary and human health.

Culex quinquefasciatus, known as a southern house mosquito, is a domestic and cosmopolitan species widely distributed in the tropical and subtropical regions of the Americas, Asia, Africa, and Oceania. It is strongly associated with humans and other vertebrates, and it has been given a relevant role in the transmission of arboviruses and parasitic diseases, some of them very important in veterinary and human health. Adult females feed mainly on birds, although they can also feed on humans and other mammals, being effective not only in surviving in the environment, but in vectoring pathogens as well. In addition, Culex pipiens and Cx. quinquefasciatus, members of the Cx. pipiens complex, coexist in a distribution hybrid zone and their mating produces viable offspring, expanding its distribution even more. Moreover, larvae can be developed in different environments, including standing water generated by humans and livestock, being able to exploit food sources found in them. This ability to get adapted to different conditions make it a successful host with great potential to initiate and facilitate the transmission of pathogens, therefore it is essential to develop environmentally friendly control systems that can be used in integrated vector management programs. In this context, the use of microorganisms, like microalgae, with the capability to alter or slow down the development of insects such as Cx. quinquefasciatus must be exhaustively explored.

Integrated strategies for enzyme assisted extraction of bioactive molecules: A review

Conventional methods of extracting bioactive molecules are gradually losing pace due to their numerous disadvantages, such as product degradation, lower efficiency, and toxicity. Thus, in light of the rising demand for these bioactive, enzymes have garnered much attention for their efficiency in extraction. However, enzyme-assisted extraction is also plagued with a high capital cost that cannot justify the extraction yields obtained. In order to mitigate these problems, enzyme-assisted extraction can be consorted with non-conventional methods. This review includes current progress concerning the combined approaches while converging the recent advancements in the field that outperformed conventional extraction processes. It also highlights the design of biocatalyst and key parameters involved in the effective extraction of bioactive molecules. An integrated approach for efficiently extracting polyphenols, essential oils, pigments, and vitamins has been comprehensively reviewed. Furthermore, the different immobilization strategies have been discussed for large-scale implementation of enzymes for extraction. The integration of advanced non-conventional methods with enzyme-assisted extraction will open new avenues to enhance the overall extraction efficiency.

Combination of Synergic Enzymes and Ultrasounds as an Effective Pretreatment Process to Break Microalgal Cell Wall and Enhance Algal Oil Extraction

Microalgal biomass is a sustainable source of bioactive lipids with omega-3 fatty acids. The efficient extraction of neutral and polar lipids from microalgae requires alternative extraction methods, frequently combined with biomass pretreatment. In this work, a combined ultrasound and enzymatic process using commercial enzymes Viscozyme, Celluclast, and Alcalase was optimized as a pretreatment method for Nannochloropsis gaditana, where the Folch method was used for lipid extraction. Significant differences were observed among the used enzymatic pretreatments, combined with ultrasound bath or probe-type sonication. To further optimize this method, ranges of temperatures (35, 45, and 55 °C) and pH (4, 5, and 8) were tested, and enzymes were combined at the best conditions. Subsequently, simultaneous use of three hydrolytic enzymes rendered oil yields of nearly 29%, showing a synergic effect. To compare enzymatic pretreatments, neutral and polar lipids distribution of Nannochloropsis was determined by HPLC-ELSD. The highest polar lipids content was achieved employing ultrasound-assisted enzymatic pretreatment (55 °C and 6 h), whereas the highest glycolipid (44.54%) and PE (2.91%) contents were achieved using Viscozyme versus other enzymes. The method was applied to other microalgae showing the potential of the optimized process as a practical alternative to produce valuable lipids for nutraceutical applications.

Carbonate assisted lipid extraction and biodiesel production from wet microalgal biomass and recycling waste carbonate for CO2 supply in microalgae cultivation

High cost of microalgal biofuel is caused by all the steps in current technology, including cultivation, harvesting, lipid extraction, biofuel processing and wastewater and waste treatment. This study aims to systematically reduce these costs with one integrated process, in which carbonate is used for cell rupture, lipid extraction and biodiesel processing, and then recycled for CO₂ absorption and carbon supply for a new round of algae cultivation. To reach this goal, carbonate-heating treatment with N, N' - dibutylurea which can enhance cell disruption were used for cell-wall breaking of wet Neochloris oleoabundans (UTEX 1185) biomass. Lipid extraction was fulfilled with carbonate/ethanol aqueous two phase extraction method and residual carbonate with wastewater from bottom phase was recycled to absorb CO₂ to generate bicarbonate for algal cultivation with fresh medium. Taking into comprehensive consideration of cell disruption efficiency, partition coefficient, and lipid recovery, the condition of cell disruption and lipid extraction was set at 90 °C, 100 min reaction time, 1:7.5 DBU:H₂O (w/w) ratio, 1:3 Na₂CO₃:H₂O (w/w) ratio, and 9% (w/w_T) ethanol concentration. The results showed that carbonate-heating treatment of wet N. oleoabundans biomass resulted in up to 90.7% cell disruption efficiency. The lipid recovery rate in carbonate/ethanol system was up to 97.9%, and the final biodiesel production was 1.30 times of that with Soxhlet method. Utilization of the waste broth after CO₂ absorption with the content of 4% (v/v_T) in the medium for new batch of algae cultivation resulted in biomass concentration of 1.68 g/L. The corresponding total fatty acids production was 0.35 g/L, which was 1.63 fold of that with fresh medium. This study firstly proved the feasibility of using carbonate for lipid extraction and biodiesel production and recycle waste carbonate for carbon re-supply during algae cultivation.

Removal of pharmaceutical and personal care products (PPCPs) from wastewater using microalgae: A review

Pharmaceuticals and personal care products (PPCPs) are a group of emerging micro-pollutants causing detrimental effects on living organisms even at low doses. Previous investigations have confirmed the presence of PPCPs in the environment at hazardous levels, mainly due to the inefficiency of conventional wastewater treatment plants (CWWTPs). Their stable structure induces longer persistence in the environment. Microalgae are currently used to bioremediate numerous pollutants of different characteristics and properties released from the domestic, industrial, agricultural, and farm sectors. CO₂ mitigation during culture and the use of biomass as feedstock for biodiesel or biofuel production are, briefly, other benefits of microalgae-mediated treatment over CWWTPs. This review provides a comprehensive summary of recent literature, an overview of approaches and treatment systems, and breakthrough in the field of algal-mediated removal of PPCPs in wastewater treatment processes. The mechanisms involved in phycoremediation, along with their experimental approaches, have been discussed in detail. Factors influencing the removal of PPCPs from aqueous media are comprehensively described and assessed. A comparative study on microalgal strains is analyzed for a more efficient implementation of future processes. The role of microalgae to mitigate the most severe environmental impacts of PPCPs and the generation of antibiotic-resistant bacteria is discussed. Also, a detailed assessment of recent research on potential toxic effects of PPCPs on microalgae was conducted. The current review highlights microalgae as a promising and sustainable approach to efficiently bio-transform or bio-adsorb PPCPs.

Nanoparticle induced biological disintegration: A new phase separated pretreatment strategy on microalgal biomass for profitable biomethane recovery

This study involves the application of new phase separated biological pretreatment (PSBP) strategy on microalgal biomass using the nickel nanoparticle induced cellulase secreting bacterial disintegration. Particularly, interest was focussed on cell wall weakening (CWW) of microalgae biomass besides the cell disintegration (CD) and release of organics. During CWW, protein, carbohydrate, cellulose, hemicellulose and DNA were used as evaluation indexes. Similarly, during CD, soluble chemical oxygen demand was used as evaluation index to assess the disintegration effect. A higher CWW was achieved at nickel nanoparticle (Np) dosage of 0.004 g/g SS. During CD, a clear demarcation in biomass solubilisation was achieved by PSBP (36%) than the sole biological pretreatment -BP (24%). The biomethanogenesis test results showed that enhanced methane production of 411 mL/g COD was achieved by PSBP than BP. Energy analysis showed that a higher net energy production of 6.467 GJ/d was achieved by PSBP.

Improving the lipid recovery from wet oleaginous microorganisms using different pretreatment techniques

Lipid extraction directly from the wet oleaginous microorganisms for biodiesel production is preferred as it reduces the energy input for traditional processes which require extensive drying of the biomass prior to the extraction. The high water content (≥80% on cell dry weight) in the wet biomass hinders the extraction efficiency due to the mass transfer limitation. This limitation can be overcome by pretreating wet biomass prior to the lipid extraction using pressurized gas that can be used alone or combined with other pretreatments to disrupt the cell wall. In this review, an extensive discussion on different pretreatments and the subsequent lipid extraction using these pretreatments is presented. Furthermore, a detailed account of the cell disruption using pressurized gas (e.g., CO₂) treatment for microbial cell lysing is also presented. Finally, a new technique on lipid extraction directly from wet biomass using the combination of pressurized CO₂ and microwave pretreatment is proposed.

Energy consumption and water-soluble protein release by cell wall disruption of Nannochloropsis gaditana

Several cell disruption methods were tested on Nannochloropsis gaditana, to evaluate their efficiency in terms of cell disintegration, energy input and release of soluble proteins. High-pressure homogenization (HPH) and bead milling were the most efficient with >95% cell disintegration, ±50% (w/w) release of total proteins and low energy input (<0.5kWh.kg^-1_biomass). Enzymatic treatment required low energy input (<0.34kWh.kg^-1_biomass), but it only released ±35% protein (w/w). Pulsed Electric Field (PEF) was neither energy-efficient (10.44kWh.kg^-1_biomass) nor successful for protein release (only 10% proteins w/w) and cell disintegration. The release of proteins after applying HPH and bead milling always required less intensive operating conditions for cell disruption. The energy cost per unit of released protein ranged from 0.15-0.25 €.kg_Protein^-1 in case of HPH, and up to 2-20 €.kg_Protein^-1 in case of PEF.

Mild and Selective Protein Release of Cell Wall Deficient Microalgae with Pulsed Electric Field

Pulsed electric field (PEF) is considered to be a very promising technology for mild cell disruption. The application of PEF for microalgae that have a rigid cell wall, however, is hampered by the presence of that rigid outer cell wall. A cell wall free mutant of C. reinhardtii was used to mimic pretreated microalgae with removed cell wall, to investigate the possibility of using PEF for protein release from microalgae. A complete release of hydrophilic proteins from the cell wall free mutants was observed whereas PEF treatment on the cell wall containing species resulted in substantially lower protein yields. Additional experiments showed that even at low energy input (0.05 kWh/kg_biomass), still about 70% of the proteins could be released with respect to bead beating as reference. These released proteins were water-soluble while the hydrophobic chlorophyll remained mainly entrapped in cell particles. SEM-analysis of these cell particles showed that PEF only opened the cells, instead of completely fragmenting them into smaller particles. These results indicate that PEF is an energy-efficient cell disruption method for selective release of water-soluble proteins, after the microalgal outer cell wall is removed. Enzymatic pretreatment to degrade the cell walls before PEF treatment was shown to be an efficient method to remove the cell wall.

Aqueous enzymatic process for cell wall degradation and lipid extraction from Nannochloropsis sp

An effective cell disruption method, including alkaline pretreatment and subsequent enzymatic treatment, was established to break cell walls and extract lipid from Nannochloropsis sp. A synergistic effect was found between alkaline pretreatment and enzymatic treatment. The combination of commercialize enzymes (cellulase, protease, lysozyme, and pectinase) achieved higher lipid yield compared with a single enzyme application. With the compromise between economic feasibility and lipid yield, the optimum reaction conditions were obtained with alkaline pretreatment at pH 10.5 at 110°C for 4h, and subsequent enzymatic treatment at pH 4 at 50°C for 30min with the dosage of each enzyme at 200IU/g. As high as 90.0% of lipid was extracted under optimal conditions from Nannochloropsis sp.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Enzymatic pretreatment of Chlorella vulgaris for biogas production: Influence of urban wastewater as a sole nutrient source on macromolecular profile and biocatalyst efficiency

Two biocatalysts, namely carbohydrases and proteases, were assessed for organic matter solubilisation and methane yield enhancement of microalgae biomass. This study evidenced Chlorella vulgaris carbohydrate accumulation (40% on VSS basis) when grown in urban wastewater. Despite of the carbohydrate prevailing fraction, protease pretreatment showed higher organic matter hydrolysis efficiency (54%). Microscopic observation revealed that carbohydrases affected slightly the cell wall while protease was not selective to wall constituents. Raw and pretreated biomass was digested at 1.5 kg tCOD m(-3) day(-1) organic loading rate (OLR1) and 20 days hydraulic retention time (HRT). The highest methane yield (137 mL CH4 g COD in(-1)) was achieved in the reactor fed with protease pretreated C. vulgaris. Additionally, anaerobic digestion was conducted at OLR2 (3 kg tCOD m(-3) day(-1)) and HRT (15 days). When compared to raw biomass, methane yield increased 5- and 6.3-fold at OLR1 and OLR2, respectively. No inhibitors were detected during the anaerobic digestion.

Comparison of Cell Disruption Methods for Improving Lipid Extraction from Thraustochytrid Strains

Lipid extraction is an integral part of biodiesel production, as it facilitates the release of fatty acids from algal cells. To utilise thraustochytrids as a potential source for lipid production. We evaluated the extraction efficiency of various solvents and solvent combinations for lipid extraction from Schizochytrium sp. S31 and Thraustochytrium sp. AMCQS5-5. The maximum lipid extraction yield was 22% using a chloroform:methanol ratio of 2:1. We compared various cell disruption methods to improve lipid extraction yields, including grinding with liquid nitrogen, bead vortexing, osmotic shock, water bath, sonication and shake mill. The highest lipid extraction yields were obtained using osmotic shock and 48.7% from Schizochytrium sp. S31 and 29.1% from Thraustochytrium sp. AMCQS5-5. Saturated and monounsaturated fatty acid contents were more than 60% in Schizochytrium sp. S31 which suggests their suitability for biodiesel production.