Biohydrogen production: strategies to improve process efficiency through microbial routes

A perspective on three sustainable hydrogen production technologies with a focus on technology readiness level, cost of production and life cycle environmental impacts

Hydrogen will play an indispensable role as both an energy vector and as a molecule in essential products in the transition to climate neutrality. However, the optimal sustainable hydrogen production system is not definitive due to challenges in energy conversion efficiency, economic cost, and associated marginal abatement cost. This review summarises and contrasts different sustainable hydrogen production technologies including for their development, potential for improvement, barriers to large-scale industrial application, capital and operating cost, and life-cycle environmental impact. Polymer electrolyte membrane water electrolysis technology shows significant potential for large-scale application in the near-term, with a higher technology readiness level (expected to be 9 by 2030) and a levelized cost of hydrogen expected to be 4.15-6 €/kg H2 in 2030; this equates to a 50% decrease as compared to 2020. The four-step copper-chlorine (Cu-Cl) water thermochemical cycle can perform better in terms of life cycle environmental impact than the three- and five-step Cu-Cl cycle, however, due to system complexity and high capital expenditure, the thermochemical cycle is more suitable for long-term application should the technology develop. Biological conversion technologies (such as photo/dark fermentation) are at a lower technology readiness level, and the system efficiency of some of these pathways such as biophotolysis is low (less than 10%). Biomass gasification may be a more mature technology than some biological conversion pathways owing to its higher system efficiency (40%-50%). Biological conversion systems also have higher costs and as such require significant development to be comparable to hydrogen produced via electrolysis.

Screening of microalgae strains for efficient biotransformation of small molecular organic acids from dark fermentation biohydrogen production wastewater

Dark fermentation biohydrogen production is a rapidly advancing and well-established field. However, the accumulation of volatile organic acid (VFAs) byproducts hinder its practical applications. Microalgae have demonstrated the ability to efficiently utilize VFAs while also treating waste gases and other nutrient elements. Integrating microalgae cultivation with dark fermentation is a promising approach. However, low VFAs tolerance and slow VFAs consumption restrict their application. To find suitable wastewater treatment microalgae, this work screened eight microalgae strains from five family. The results demonstrated that Chlamydomonas reinhardtii exhibited significant advantages in VFAs utilization, achieving a maximum removal of 100% for acetate and 52.5% for butyrate. Among the tested microalgae strains, CW15 outperformed in terms of photobioreactor adaptability, VFAs utilization, biomass productivity, and nutrient removal, making it the most promising microalgae for practical applications. This research demonstrates the feasibility of integrating microalgae cultivation with dark fermentation and providing a viable technical solution for integrated-biorefining.

A review on biological biohydrogen production: Outlook on genetic strain enhancements, reactor model and techno-economics analysis

Modernisation of industrial and transportation sector would have not imaginable without the help of fossil fuels, but constant usage has led to many environmental concerns. As a step forward, for safer next generation living we are forced to look into green fuels like bio‑hydrogen and higher alcohols. This review mainly focuses on bio‑hydrogen production via biological pathways, genetic improvements, knowledge gap, economics, and future directions. Dark and photo fermentation process with the factor influence the process (pH regulation, temperature, hydraulic retention time, organic loading rate, Maintenance, Nutrient) is studied. Integration of dark fermentation and microbial electrolysis cell is the most trending progression for sustainable bio‑hydrogen production. Genetic improvement of microbe for biohydrogen production via inactivation of hydrogenase (H2ase) and improve oxygen tolerant H2ase. In future, bioaugmentation, multidisciplinary integrated process and microbial electrolysis needs to be experimented in industrial level scale for successful commercialization. About 41.47 mmol H2/g DCW h at 40 g/L of optimum biohydrogen production was obtained through glycerol fermentation. From the studies, the cost of biohydrogen production was found to high with respect to the direct bio photolysis it cost around $7.24 kg-1; for indirect bio photolysis it cost around $7.54 kg-1 and for fermentation it cost around $7.61 kg-1.

A high-value biohythane production: Feedstocks, reactor configurations, pathways, challenges, technoeconomics and applications

In recent years, the demand for high-quality biofuels from renewable sources has become an aspirational goal to offer a clean environment by alternating the depleting fossil fuels to meet future energy needs. In this aspect, biohythane production from wastes has received extensive research interest since it contains superior fuel characteristics than the promising conventional biofuel i.e. biogas. The main aim is to promote research and potentials of biohythane production by a systematic review of scientific literature on the biohythane production pathways, substrate/microbial consortium suitability, reactor design, and influential process/operational factors. Reactor configuration also decides the product yield in addition to other key factors like waste composition, temperature, pH, retention time and loading rates. Hence, a detailed emphasis on different reactor configurations with respect to the type of feedstock has also been given. The technical challenges are highlighted towards process optimization and system scale up. Meanwhile, solutions to improve product yield, technoeconomics, applications and key policy and governance factors to build a hydrogen based society have also been discussed.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

Valorization of wastewater: A paradigm shift towards circular bioeconomy and sustainability

Limitation in the availability of natural resources like water is the main drive for focussing on resource recovery from wastewater. Rapid urbanization with increased consumption of natural resources has severely affected its management and security. The application of biotechnological processes offers a feasible approach to concentrating and transforming wastewater for resource recovery and a step towards a circular economy. Wastewater generally contains high organic materials, nutrients, metals and chemicals, which have economic value. Hence, its management can be a valuable resource through the implementation of a paradigm transformation for value-added product recovery. This review focuses on the circular economy of "close loop" process by wastewater reuse and energy recovery identifying the emerging technologies for recovering resources across the wastewater treatment phase. Conventional wastewater treatment technologies have been discussed along with the advanced treatment technologies such as algal treatment, anammox technology, microbial fuel cells (MFC). Apart from recovering energy in the form of biogas and biohydrogen, second and third-generation biofuels as well as biohythane and electricity generation have been deliberated. Other options for resource recovery are single-cell protein (SCP), biopolymers as well as recovery of metals and nutrients. The paper also highlights the applications of treated wastewater in agriculture, aquaponics, fisheries and algal cultivation. The concept of Partitions-release-recover (PRR) has been discussed for a better understanding of the filtration treatment coupled with anaerobic digestion. The review provides a critical evaluation on the importance of adopting a circular economy and their role in achieving sustainable development goals (SDGs). Thus, it is imperative that such initiatives towards resource recovery from wastewater through integration of concepts can aid in providing wastewater treatment system with resource efficiency.

Emerging innovations for sustainable production of bioethanol and other mercantile products from circular economy perspective

Biogenic municipal solid waste (BMSW) and food waste (FW) with high energy density are ready to tap renewable resources for industrial scale ethanol refinery foreseen for establishing bio-based society. Circular economy has occupied limelight in the domain of renewable energy and sustainable chemicals production. The present review highlights the importance of BMSW/FW as newer feed reserves that can cater as parent molecules for an array of high-visibility industrial products along with bioethanol upon implementing a judicious closed-cascade mass-flow mechanism enabling ultimate feed and waste stream valorisation. Though these organics are attractive resources their true potential for energy production has not been quantified yet owing to their heterogeneous composition and associated technical challenges thus pushing waste refinery and industrial symbiosis concepts to backseat. To accelerate this industrial vision, the novel bioprocessing strategies for enhanced and low-cost production of bioethanol from BMSW/FW along with other commercially imperative product portfolio have been discussed.

Microorganisms as New Sources of Energy

The use of fossil energy sources has a negative impact on the economic and socio-political stability of specific regions and countries, causing environmental changes due to the emission of greenhouse gases. Moreover, the stocks of mineral energy are limited, causing the demand for new types and forms of energy. Biomass is a renewable energy source and represents an alternative to fossil energy sources. Microorganisms produce energy from the substrate and biomass, i.e., from substances in the microenvironment, to maintain their metabolism and life. However, specialized microorganisms also produce specific metabolites under almost abiotic circumstances that often do not have the immediate task of sustaining their own lives. This paper presents the action of biogenic and biogenic–thermogenic microorganisms, which produce methane, alcohols, lipids, triglycerides, and hydrogen, thus often creating renewable energy from waste biomass. Furthermore, some microorganisms acquire new or improved properties through genetic interventions for producing significant amounts of energy. In this way, they clean the environment and can consume greenhouse gases. Particularly suitable are blue-green algae or cyanobacteria but also some otherwise pathogenic microorganisms (E. coli, Klebsiella, and others), as well as many other specialized microorganisms that show an incredible ability to adapt. Microorganisms can change the current paradigm, energy–environment, and open up countless opportunities for producing new energy sources, especially hydrogen, which is an ideal energy source for all systems (biological, physical, technological). Developing such energy production technologies can significantly change the already achieved critical level of greenhouse gases that significantly affect the climate.

A directed genome evolution method to enhance hydrogen production in Rhodobacter capsulatus

Nitrogenase-dependent H2 production by photosynthetic bacteria, such as Rhodobacter capsulatus, has been extensively investigated. An important limitation to increase H2 production using genetic manipulation is the scarcity of high-throughput screening methods to detect possible overproducing mutants. Previously, we engineered R. capsulatus strains that emitted fluorescence in response to H2 and used them to identify mutations in the nitrogenase Fe protein leading to H2 overproduction. Here, we used ultraviolet light to induce random mutations in the genome of the engineered H2-sensing strain, and fluorescent-activated cell sorting to detect and isolate the H2-overproducing cells from libraries containing 5 × 105 mutants. Three rounds of mutagenesis and strain selection gradually increased H2 production up to 3-fold. The whole genomes of five H2 overproducing strains were sequenced and compared to that of the parental sensor strain to determine the basis for H2 overproduction. No mutations were present in well-characterized functions related to nitrogen fixation, except for the transcriptional activator nifA2. However, several mutations mapped to energy-generating systems and to carbon metabolism-related functions, which could feed reducing power or ATP to nitrogenase. Time-course experiments of nitrogenase depression in batch cultures exposed mismatches between nitrogenase protein levels and their H2 and ethylene production activities that suggested energy limitation. Consistently, cultivating in a chemostat produced up to 19-fold more H2 than the corresponding batch cultures, revealing the potential of selected H2 overproducing strains.

Two-Phase Anaerobic Digestion of Corn Steep Liquor in Pilot Scale Biogas Plant with Automatic Control System with Simultaneous Hydrogen and Methane Production

Experimental studies of two-phase anaerobic digestion of corn steep liquor in semi-continuous automatic and semi-automatic modes of operation of a cascade of two anaerobic bioreactors with monitoring and control systems were performed. Corn steep liquor—a waste product from the process of treating corn grain for starch extraction—was used as a substrate in the process of anaerobic digestion with simultaneous hydrogen and methane production. The daily yields of biohydrogen in bioreactor 1 of the cascade (with a working volume of 8 dm3) are variable. In good operation, they are in the range of 0.7 to 1.0 L of biogas from a 1 dm3 working volume of the bioreactor, and the optimal pH is in the range of 5.0–5.5. The concentration of hydrogen in the biogas from the hydrogen bioreactor 1 is in the range of 14–34.7%. The daily yields of biomethane in bioreactor 2 of the cascade (with a working volume of 80 dm3) vary in the range 0.4 to 0.85 L of biogas from a 1 dm3 working volume of the bioreactor, and the concentration of methane in the biogas from bioreactor 2 is high and remains practically constant (in the range 65–69%). At a dilution rate of 0.4 day−1 and an organic loading rate of 20 gL for bioreactor 1, respectively, and a dilution rate of 0.05 day−1 for bioreactor 2, the best results were obtained. The computer control system is presented. Some energetical considerations were discussed.

Microalgae-bacterial granular consortium: Striding towards sustainable production of biohydrogen coupled with wastewater treatment

Anthropogenic activities have drastically affected the environment, leading to increased waste accumulation in atmospheric bodies, including water. Wastewater treatment is an energy-consuming process and typically requires thousands of kilowatt hours of energy. This enormous energy demand can be fulfilled by utilizing the microbial electrolysis route to breakdown organic pollutants in wastewater which produces clean water and biohydrogen as a by-product of the reaction. Microalgae are the promising microorganism for the biohydrogen production, and it has been investigated that the interaction between microalgae and bacteria can be used to boost the yield of biohydrogen. Consortium of algae and bacteria resulting around 50-60% more biohydrogen production compared to the biohydrogen production of algae and bacteria separately. This review summarises the recent development in different microalgae-bacteria granular consortium systems successfully employed for biohydrogen generation. We also discuss the limitations in biohydrogen production and factors affecting its production from wastewater.

Regulation and augmentation of anaerobic digestion processes via the use of bioelectrochemical systems

Anaerobic digestion (AD) is a biological process that can be used to treat a wide range of carbon-rich wastes and producerenewable, green energy. To maximize energy recovery from various resources while controlling inhibitory chemicals, notwithstanding AD's efficiency, many limitations must be addressed. As a result, bioelectrochemical systems (BESs) have emerged as a hybrid technology, extensively studied to remediate AD inhibitory chemicals, increase AD operating efficacy, and make the process economically viable via integration approaches. Biogas and residual intermediatory metabolites such as volatile fatty acids are upgraded to value-added chemicals and fuels with the help of the BES as a pre-treatment step, within AD or after the AD process. It may also be used directly to generate power. To overcome the constraints of AD in lab-scale applications, this article summarizes BES technology and operations and endorses ways to scale up BES-AD systems in the future.

Biohydrogen from organic wastes as a clean and environment-friendly energy source: Production pathways, feedstock types, and future prospects

Microbial fermentation of organic matter under anaerobic conditions is currently the prominent pathway for biohydrogen production. Organic matter present in waste residues is regarded as an economic feedstock for biohydrogen production by dark and photo fermentative bacteria. Agricultural residues, fruit wastes, vegetable wastes, industrial wastewaters, and other livestock residues are some of the organic wastes most commonly used for biohydrogen production due to their higher organic content and biodegradability. Appropriate pretreatments are required to enhance the performance of biohydrogen from complex organic wastes. Biohydrogen production could also be enhanced by optimizing operation conditions and the addition of essential nutrients and nanoparticles. This review describes the pathways of biohydrogen production, discusses the effect of organic waste sources used and microbes involved on biohydrogen production, along with addressing the key parameters, advantages, and difficulties in each biohydrogen production pathway.

Emerging technologies for sustainable production of biohydrogen production from microalgae: A state-of-the-art review of upstream and downstream processes

Biohydrogen (BioH₂) is considered as one of the most environmentally friendly fuels and a strong candidate to meet the future demand for a sustainable source of energy. Presently, the production of BioH₂ from photosynthetic organisms has raised a lot of hopes in the fuel industry. Moreover, microalgal-based BioH₂ synthesis not only helps to combat current global warming by capturing greenhouse gases but also plays a key role in wastewater treatment. Hence, this manuscript provides a state-of-the-art review of the upstream and downstream BioH₂ production processes. Different metabolic routes such as direct and indirect photolysis, dark fermentation, photofermentation, and microbial electrolysis are covered in detail. Upstream processes (e.g. growth techniques, growth media) also have a great impact on BioH₂ productivity and economics, which is also explored. Technical and scientific obstacles of microalgae BioH₂ systems are finally addressed, allowing the technology to become more innovative and commercial.

Towards a Synthetic Biology Toolset for Metallocluster Enzymes in Biosynthetic Pathways: What We Know and What We Need

Microbes are routinely engineered to synthesize high-value chemicals from renewable materials through synthetic biology and metabolic engineering. Microbial biosynthesis often relies on expression of heterologous biosynthetic pathways, i.e., enzymes transplanted from foreign organisms. Metallocluster enzymes are one of the most ubiquitous family of enzymes involved in natural product biosynthesis and are of great biotechnological importance. However, the functional expression of recombinant metallocluster enzymes in live cells is often challenging and represents a major bottleneck. The activity of metallocluster enzymes requires essential supporting pathways, involved in protein maturation, electron supply, and/or enzyme stability. Proper function of these supporting pathways involves specific protein-protein interactions that remain poorly characterized and are often overlooked by traditional synthetic biology approaches. Consequently, engineering approaches that focus on enzymatic expression and carbon flux alone often overlook the particular needs of metallocluster enzymes. This review highlights the biotechnological relevance of metallocluster enzymes and discusses novel synthetic biology strategies to advance their industrial application, with a particular focus on iron-sulfur cluster enzymes. Strategies to enable functional heterologous expression and enhance recombinant metallocluster enzyme activity in industrial hosts include: (1) optimizing specific maturation pathways; (2) improving catalytic stability; and (3) enhancing electron transfer. In addition, we suggest future directions for developing microbial cell factories that rely on metallocluster enzyme catalysis.

Approaches in the photosynthetic production of sustainable fuels by cyanobacteria using tools of synthetic biology

Cyanobacteria, photosynthetic prokaryotic microorganisms having a simple genetic composition are the prospective photoautotrophic cell factories for the production of a wide range of biofuel molecules. The simple genetic composition of cyanobacteria allows effortless genetic manipulation which leads to increased research endeavors from the synthetic biology approach. Various unicellular model cyanobacterial strains like Synechocystis sp. PCC 6803 and Synechococcus elongatus PCC 7942 have been successfully engineered for biofuels generation. Improved development of synthetic biology tools, genetic modification methods and advancement in transformation techniques to construct a strain that can contain multiple foreign genes in a single operon have vastly expanded the functions that can be used for engineering photosynthetic cyanobacteria for the generation of various biofuel molecules. In this review, recent advancements and approaches in synthetic biology tools used for cyanobacterial genome editing have been discussed. Apart from this, cyanobacterial productions of various fuel molecules like isoprene, limonene, α-farnesene, squalene, alkanes, butanol, and fatty acids, which can be a substitute for petroleum and fossil fuels in the future, have been elaborated.

Assessment of Sieverts Law Assumptions and 'n' Values in Palladium Membranes: Experimental and Theoretical Analyses

Palladium and palladium alloy membranes are superior materials for hydrogen purification, removal, or reaction processes. Sieverts’ Law suggests that the flux of hydrogen through such membranes is proportional to the difference between the feed and permeate side partial pressures, each raised to the 0.5 power (n = 0.5). Sieverts’ Law is widely applied in analyzing the steady state hydrogen permeation through Pd-based membranes, even in some cases where the assumptions made in deriving Sieverts’ Law do not apply. Often permeation data are fit to the model allowing the pressure exponent (n) to vary. This study experimentally assessed the validity of Sieverts’ Law as hydrogen was separated from other gases and theoretically modelled the effects of pressure and temperature on the assumptions and hence the accuracy of the 0.5-power law even with pure hydrogen feed. Hydrogen fluxes through Pd and Pd-Ag alloy foils from feed mixtures (5–83% helium in hydrogen; 473–573 K; with and without a sweep gas) were measured to study the effect of concentration polarization (CP) on hydrogen permeance and the applicability of Sieverts’ Law under such conditions. Concentration polarization was found to dominate hydrogen transport under some experimental conditions, particularly when feed concentrations of hydrogen were low. All mixture feed experiments showed deviation from Sieverts’ Law. For example, the hydrogen flux through Pd foil was found to be proportional to the partial pressure difference (n ≈ 1) rather than being proportional to the difference in the square root of the partial pressures (n = 0.5), as suggested by Sieverts’ Law, indicating the high degree of concentration polarization. A theoretical model accounting for Langmuir adsorption with temperature dependent adsorption equilibrium coefficient was made and used to assess the effect of varying feed pressure from 1–136 atm at fixed temperature, and of varying temperature from 298 to 1273 K at fixed pressure. Adsorption effects, which dominate at high pressure and at low temperature, result in pressure exponents (n) values less than 0.5. With better understanding of the transport steps, a qualitative analysis of literature (n) values of 0.5, 0.5 < n < 1, and n > 1, was conducted suggesting the role of each condition or step on the hydrogen transport based on the empirically fit exponent value.

Biohydrogen production using kitchen waste as the potential substrate: A sustainable approach

This review explores the sustainable feasibility of kitchen wastes to implement as an effective substrate for biohydrogen production through dark fermentation. Being organic in nature, kitchen wastes are enomerous source of nutrients and carbohydrate, which are produced in huge quantity in our daily life, and therefore can be potentially used for biohydrogen production through microbial technique. The review discussed in detail about the impact of kitchen waste, its availability and sustainability on the biohydrogen production process along with future scope at industrial scale for the production of sustainable and renewable energy. In addition, recent advances, and their possibility to enhance the fermentative biohydrogen production using kitchen waste have been covered. Emphasis is also made on the application of nanomaterials to increase the yield of biohydrogen production and to make the entire process more economical and sustainable while using kitchen wastes as substrate for the microbial fermentation. Finally, advantages, limitations and future prospects of the process of biohydrogen production using kitchen wastes as potential substrate have been discussed.

Renewable biohydrogen production from lignocellulosic biomass using fermentation and integration of systems with other energy generation technologies

Biohydrogen is a clean and renewable source of energy. It can be produced by using technologies such as thermochemical, electrolysis, photoelectrochemical and biological, etc. Among these technologies, the biological method (dark fermentation) is considered more sustainable and ecofriendly. Dark fermentation involves anaerobic microbes which degrade carbohydrate rich substrate and produce hydrogen. Lignocellulosic biomass is an abundantly available raw material and can be utilized as an economic and renewable substrate for biohydrogen production. Although there are many hurdles, continuous advancements in lignocellulosic biomass pretreatment technology, microbial fermentation (mixed substrate and co-culture fermentation), the involvement of molecular biology techniques, and understanding of various factors (pH, T, addition of nanomaterials) effect on biohydrogen productivity and yield render this technology efficient and capable to meet future energy demands. Further integration of biohydrogen production technology with other products such as bio-alcohol, volatile fatty acids (VFAs), and methane have the potential to improve the efficiency and economics of the overall process. In this article, various methods used for lignocellulosic biomass pretreatment, technologies in trends to produce and improve biohydrogen production, a coproduction of other energy resources, and techno-economic analysis of biohydrogen production from lignocellulosic biomass are reviewed.

3D reconstruction and morphological analysis of electrostimulated hyperthermophile biofilms of Thermotoga neapolitana

In this study, the morphological characteristics of the T. neapolitana biofilms on a ceramic carrier, stainless steel, graphite foil, carbon paper, carbon felt and carbon cloth using 3D reconstruction technology was investigated. This was based on the micrographs available in Squadrito et al. (Data Brief 33: 106-403, 2020). Besides the ceramic carrier, the other surfaces were conductive and slightly positively polarised (0.8 and 1.2 V). A simple drying technique was used to show the biofilm and avoid its detachment while chemical fixing with glutaraldehyde was used to better highlight the bacterial morphology within the biofilm. The latter was more suitable for investigating biofilm morphology while the former for bacteria morphology. For the ceramic carrier and stainless steel electrode surfaces, a regular undulating pattern of the biofilm was highlighted by the 3D rendering whilst the glutaraldehyde fixed sample showed a rod-like bacteria morphology. For the other surfaces, a regular undulating pattern of the biofilm and a mixture of a rod-like and a coccoid form of settled bacteria were evidenced also. Carbon cloth was the more suitable electrode for the current application due to its richer filamentous network of bacteria biofilm suggesting a better prevention of bacteria detachment from the electrode surface. Indeed, a preserved biofilm was highlighted on the surfaces of the polarised carbon cloth.

Renewable hydrogen production by dark-fermentation: Current status, challenges and perspectives

Global urbanization has resulted in amplified energy and material consumption with simultaneous waste generation. Current energy demand is mostly fulfilled by finite fossil reserves, which has critical impact on the environment and thus, there is a need for carbon-neutral energy. In this view, biohydrogen (bio-H₂) is considered suitable due to its potential as a green and dependable carbon-neutral energy source in the emerging 'Hydrogen Economy'. Bio-H₂ production by dark fermentation of biowaste/biomass/wastewater is gaining significant attention. However, bio-H₂production still holds critical challenges towards scale-up with reference to process limitations and economic viabilities. This review illustrates the status of dark-fermentation process in the context of process sustainability and achieving commercial success. The review also provides an insight on various process integrations for maximum resource recovery including closed loop biorefinery approach towards the accomplishment of carbon neutral H₂ production.

State-of-the-art technologies for continuous high-rate biohydrogen production

Dark fermentation is a technically feasible technology for achieving carbon dioxide-free hydrogen production. This review presents the current findings on continuous hydrogen production using dark fermentation. Several operational strategies and reactor configurations have been suggested. The formation of attached mixed-culture microorganisms is a typical prerequisite for achieving high production rate, hydrogen yield, and resilience. To date, fixed-bed reactors and dynamic membrane bioreactors yielded higher biohydrogen performance than other configurations. The symbiosis between H₂-producing bacteria and biofilm-forming bacteria was essential to avoid washout and maintain the high loading rates and hydrogenic metabolic flux. Recent research has initiated a more in-depth comparison of microbial community changes during dark fermentation, primarily with computational science techniques based on 16S rRNA gene sequencing investigations. Future techno-economic analysis of dark fermentative biohydrogen production and perspectives on unraveling mitigation mechanisms induced by attached microorganisms in dark fermentation processes are further discussed.

Techno-economic assessment of various hydrogen production methods - A review

Hydrogen is a clean fuel that could provide energy incentives and reduce environmental impacts, if production platform is carefully selected and optimized. In specific, techno-economic and sensitivity analysis of the existing hydrogen production platforms and processes is need for an hour to boost the future hydrogen economical aspects. This will have greater impact on future hydrogen production project designs and developing new approaches to reduce the overall production costs to make it as cheaper fuel. The sensitivity analysis of various hydrogen production process such as pyrolysis, gasification, steam reforming of natural gas, dark fermentation, photobiolysis, water electrolysis and renewable liquid reforming were reviewed to evaluate their merits and demerits along with cost-effectiveness. On economic view point, steam reforming of natural gas is efficient, low cost and best methods for hydrogen production. A future research is required to reduce energy input and trapping carbon dioxide emission using membrane models.

Fermentation Enhanced Biotransformation of Compounds in the Kernel of Chrysophyllum albidum

Chrysophyllum albidum Linn (African star apple) is a fruit with extensive nutritional and medicinal benefits. The fruit and kernel in the seed are both edible. Strains of lactic acid bacteria (LAB) were isolated from fermented seeds and assessed for probiotic characteristics. The extracts in both the unfermented and the fermented aqueous extracts from the kernels obtained from the seeds of C. albidum were subjected to analysis using the gas chromatography/mass spectrometry (GC-MS) method. This analysis identified the bioactive compounds present as possible substrate(s) for the associated organisms inducing the fermentation and the resultant biotransformed products formed. Three potential probiotic LAB strains identified as Lactococcus raffinolactis (ProbtA1), Lactococcus lactis (ProbtA2a), and Pediococcus pentosaceus (ProbtA2b) were isolated from the fermented C. albidum seeds. All strains were non hemolytic, which indicated their safety, Probt (A1, A2a, and A2b) grew in an acidic environment (pH 3.5) during the 48-h incubation time, and all three strains grew in 1% bile, and exhibited good hydrophobicity and auto-aggregation properties. Mucin binding proteins was not detected in any strain, and bile salt hydrolase was detected in all the strains. l-lactic acid (28.57%), norharman (5.07%), formyl 7E-hexadecenoate (1.73%), and indole (1.51%) were the four major constituents of the fermented kernel of the C. albidum, while 2,5-dimethylpyrazine (C1, 1.27%), 3,5-dihydroxy-6-methyl-2,3-dihydropyran-4-one (C2, 2.90%), indole (C3, 1.31%), norharman (C4, 3.01%), and methyl petroselinate (C5, 4.33%) were the five major constituents of the unfermented kernels. The isolated LAB are safe for consumption. The fermenting process metabolized C1, C2, and C5, which are possible starter cultures for the growth of probiotics. Fermentation is an essential tool for bioengineering molecules in foods into safe and health beneficial products.

Hydrogen Production through Glycerol Photoreforming on TiO2/Mesoporous Carbon: Influence of the Synthetic Method

This article explores the effect of the synthetic method of titanium dioxide (TiO₂)/C composites (physical mixture and the water-assisted/unassisted sol-gel method) on their photocatalytic activity for hydrogen production through glycerol photoreforming. The article demonstrates that, apart from a high surface area of carbon and the previous activation of its surface to favor titania incorporation, the appropriate control of titania formation is crucial. In this sense, even though the amount of incorporated titania was limited by the saturation of carbon surface groups (in our case, ca. 10 wt.% TiO₂), the sol-gel process without water addition seemed to be the best method, ensuring the formation of small homogeneously-distributed anatase crystals on mesoporous carbon. In this way, a ca. 110-fold increase in catalyst activity compared to Evonik P25 (expressed as hydrogen micromole per grams of titania) was achieved.

Heterologous Hydrogenase Overproduction Systems for Biotechnology-An Overview

Hydrogenases are complex metalloenzymes, showing tremendous potential as H2-converting redox catalysts for application in light-driven H2 production, enzymatic fuel cells and H2-driven cofactor regeneration. They catalyze the reversible oxidation of hydrogen into protons and electrons. The apo-enzymes are not active unless they are modified by a complicated post-translational maturation process that is responsible for the assembly and incorporation of the complex metal center. The catalytic center is usually easily inactivated by oxidation, and the separation and purification of the active protein is challenging. The understanding of the catalytic mechanisms progresses slowly, since the purification of the enzymes from their native hosts is often difficult, and in some case impossible. Over the past decades, only a limited number of studies report the homologous or heterologous production of high yields of hydrogenase. In this review, we emphasize recent discoveries that have greatly improved our understanding of microbial hydrogenases. We compare various heterologous hydrogenase production systems as well as in vitro hydrogenase maturation systems and discuss their perspectives for enhanced biohydrogen production. Additionally, activities of hydrogenases isolated from either recombinant organisms or in vivo/in vitro maturation approaches were systematically compared, and future perspectives for this research area are discussed.

Organic waste biorefineries: Looking towards implementation

The concept of biorefinery expands the possibilities to extract value from organic matter in form of either bespoke crops or organic waste. The viability of biorefinery schemes depends on the recovery of higher-value chemicals with potential for a wide distribution and an untapped marketability. The feasibility of biorefining organic waste is enhanced by the fact that the biorefinery will typically receive a waste management fee for accepting organic waste. The development and implementation of waste biorefinery concepts can open up a wide array of possibilities to shift waste management towards higher sustainability. However, barriers encompassing environmental, technical, economic, logistic, social and legislative aspects need to be overcome. For instance, waste biorefineries are likely to be complex systems due to the variability, heterogeneity and low purity of waste materials as opposed to dedicated biomasses. This article discusses the drivers that can make the biorefinery concept applicable to waste management and the possibilities for its development to full scale. Technological, strategic and market constraints affect the successful implementations of these systems. Fluctuations in waste characteristics, the level of contamination in the organic waste fraction, the proximity of the organic waste resource, the markets for the biorefinery products, the potential for integration with other industrial processes and disposal of final residues are all critical aspects requiring detailed analysis. Furthermore, interventions from policy makers are necessary to foster sustainable bio-based solutions for waste management.

Green technology for sustainable biohydrogen production (waste to energy): A review

Perceiving and detecting a sustainable source of energy is very critical issue for current modern society. Hydrogen on combustion releases energy and water as a byproduct and has been considered as an environmental pollution free energy carrier. From the last decade, most of the researchers have recommended hydrogen as one of the cleanest fuels and its demand is rising ever since. Hydrogen having the highest energy density is more advantageous than any other fuel. Hydrogen obtained from the fossil fuels produces carbon dioxide as a byproduct and creates environment negative effect. Therefore, biohydrogen production from green algae and cyanobacteria is an attractive option that generates a benign renewable energy carrier. Microalgal feedstocks show a high potential for the generation of fuel such as biohydrogen, bioethanol and biodiesel. This article has reviewed the different methods of biohydrogen production while also trying to find out the most economical and ecofriendly method for its production. A thorough review process has been carried out to study the methods, enzymes involved, factors affecting the rate of hydrogen production, dual nature of algae, challenges and commercialization potential of algal biohydrogen.

Algae-Bacteria Consortia as a Strategy to Enhance H2 Production

Biological hydrogen production by microalgae is a potential sustainable, renewable and clean source of energy. However, many barriers limiting photohydrogen production in these microorganisms remain unsolved. In order to explore this potential and make biohydrogen industrially affordable, the unicellular microalga Chlamydomonas reinhardtii is used as a model system to solve barriers and identify new approaches that can improve hydrogen production. Recently, Chlamydomonas–bacteria consortia have opened a new window to improve biohydrogen production. In this study, we review the different consortia that have been successfully employed and analyze the factors that could be behind the improved H₂ production.

Waste based hydrogen production for circular bioeconomy: Current status and future directions

The present fossil fuel-based energy sector has led to significant industrial growth. On the other hand, the dependence on fossil fuels leads to adverse impact on the environment through releases of greenhouse gases. In this scenario, one possible substitute is biohydrogen, an eco-friendly energy carrier as high-energy produces. The substrates rich in organic compounds like organic waste/wastewater are very useful for improved hydrogen generation through the dark fermentation. Thus, this review article, initially, the status of biohydrogen production from organic waste and various strategies to enhance the process efficiency are concisely discussed. Then, the practical confines of biohydrogen processes are thoroughly discussed. Also, alternate routes such as multiple process integration approach by adopting biorefinery concept to increase overall process efficacy are considered to address industrial-level applications. To conclude, future perspectives besides with possible ways of transforming dark fermentation effluent to biofuels and biochemicals, which leads to circular bioeconomy, are discussed.

Fabrication of γ-Fe2O3 Nanowires from Abundant and Low-cost Fe Plate for Highly Effective Electrocatalytic Water Splitting

Water splitting is thermodynamically uphill reaction, hence it cannot occur easily, and also highly complicated and challenging reaction in chemistry. In electrocatalytic water splitting, the combination of oxygen and hydrogen evolution reactions produces highly clean and sustainable hydrogen energy and which attracts research communities. Also, fabrication of highly active and low cost materials for water splitting is a major challenge. Therefore, in the present study, γ-Fe₂O₃ nanowires were fabricated from highly available and cost-effective iron plate without any chemical modifications/doping onto the surface of the working electrode with high current density. The fabricated nanowires achieved the current density of 10 mA/cm² at 1.88 V vs. RHE with the scan rate of 50 mV/sec. Stability measurements of the fabricated Fe₂O₃ nanowires were monitored up to 3275 sec with the current density of 9.6 mA/cm² at a constant potential of 1.7 V vs. RHE and scan rate of 50 mV/sec.

Industrial wastewater to biohydrogen: Possibilities towards successful biorefinery route

The aim of this review is to summarize the modern developments and enhancement strategies reported for improving the biorefinery route of industrial wastewater to biohydrogen. Recent developments towards biohydrogen production chiefly involves culture enrichment, pretreatment of biocatalysts, co culture fermentation, metabolic and genetic engineering, ecobiotechnological approaches and the coupling process of biohydrogen. In addition, an overview of dark fermentation, pathways involved, microbes involved in biohydrogen production, industrial wastewater as substrate have been focused. The utilization of organic residuals of dark fermentation for subsequent value added products are highlighted. More apparently, the two stage coupling process and its possibilities towards biorefinery has been reviewed comprehensively. Moreover, comparative energy and economic aspects of biohydrogen production from industrial wastewater and its prospects towards pilot scale applications are also spotlighted. Though all the enhancement strategies have both benefits and disadvantages, coupling process is considered as the most successful biorefinery route for biohydrogen production.

A Multi-Objective Optimization Model for a Non-Traditional Energy System in Beijing under Climate Change Conditions

In recent years, with the increase of annual average temperature and the decrease of annual precipitation in Beijing, the fragility of Beijing’s energy system has become more and more prominent, especially the balance of electricity supply and demand in extreme weather. In the context of unstable supply of new and renewable energies, it is imperative to strengthen the ability of the energy system to adapt to climate change. This study first simulated climate change in Beijing based on regional climate data. At the same time, the Statistical Program for Social Sciences was used to perform multiple linear regression analysis on Beijing’s future power demand and to analyze the impact of climate change on electricity supply in both the RCP4.5 and RCP8.5 (representative concentration pathway 4.5 and 8.5) scenarios. Based on the analysis of the impact of climate change on energy supply, a multi-objective optimization model for new and renewable energy structure adjustment combined with climate change was proposed. The model was then used to predict the optimal power generation of the five energy types under different conditions in 2020. Through comparison of the results, it was found that the development amount and development ratio of various energy forms underwent certain changes. In the case of climate change, the priority development order of new and renewable energies in Beijing was: external electricity > other renewable energy > solar energy > wind energy > biomass energy. The energy structure adjustment program in the context of climate change will contribute to accelerating the development and utilization of new and renewable energies, alleviating the imbalance between power supply and demand and improving energy security.

Understanding the NaCl-dependent behavior of hydrogen production of a marine bacterium, Vibrio tritonius

Biohydrogen is one of the most suitable clean energy sources for sustaining a fossil fuel independent society. The use of both land and ocean bioresources as feedstocks show great potential in maximizing biohydrogen production, but sodium ion is one of the main obstacles in efficient bacterial biohydrogen production. Vibrio tritonius strain AM2 can perform efficient hydrogen production with a molar yield of 1.7 mol H₂/mol mannitol, which corresponds to 85% theoretical molar yield of H₂ production, under saline conditions. With a view to maximizing the hydrogen production using marine biomass, it is important to accumulate knowledge on the effects of salts on the hydrogen production kinetics. Here, we show the kinetics in batch hydrogen production of V. tritonius strain AM2 to investigate the response to various NaCl concentrations. The modified Han-Levenspiel model reveals that salt inhibition in hydrogen production using V. tritonius starts precisely at the point where 10.2 g/L of NaCl is added, and is critically inhibited at 46 g/L. NaCl concentration greatly affects the substrate consumption which in turn affects both growth and hydrogen production. The NaCl-dependent behavior of fermentative hydrogen production of V. tritonius compared to that of Escherichia coli JCM 1649 reveals the marine-adapted fermentative hydrogen production system in V. tritonius. V. tritonius AM2 is capable of producing hydrogen from seaweed carbohydrate under a wide range of NaCl concentrations (5 to 46 g/L). The optimal salt concentration producing the highest levels of hydrogen, optimal substrate consumption and highest molar hydrogen yield is at 10 g/L NaCl (1.0% (w/v)).

Improvement of hydrogen production from Chlorella sp. biomass by acid-thermal pretreatment

BACKGROUND

Owing to the high growth rate, high protein and carbohydrate contents, and an ability to grow autotrophically, microalgal biomass is regarded as a promising feedstock for fermentative hydrogen production. However, the rigid cell wall of microalgae impedes efficient hydrolysis of the biomass, resulting in low availability of assimilable nutrients and, consequently, low hydrogen production. Therefore, pretreatment of the biomass is necessary in order to achieve higher hydrogen yield (HY). In the present study, acid-thermal pretreatment of Chlorella sp. biomass was investigated. Conditions for the pretreatment, as well as those for hydrogen production from the pretreated biomass, were optimized. Acid pretreatment was also conducted for comparison.

RESULTS

Under optimum conditions (0.75% (v/v) H2SO4, 160 °C, 30 min, and 40 g-biomass/L), acid-thermal pretreatment yielded 151.8 mg-reducing-sugar/g-biomass. This was around 15 times that obtained from the acid pretreatment under optimum conditions (4% (v/v) H2SO4, 150 min, and 40 g-biomass/L). Fermentation of the acid-thermal pretreated biomass gave 1,079 mL-H2/L, with a HY of 54.0 mL-H2/g-volatile-solids (VS), while only 394 mL/L and 26.3 mL-H2/g-VS were obtained from the acid-pretreated biomass.

CONCLUSIONS

Acid-thermal pretreatment was effective in solubilizing the biomass of Chlorella sp. Heat exerted synergistic effect with acid to release nutrients from the biomass. Satisfactory HY obtained with the acid-thermal pretreated biomass demonstrates that this pretreatment method was effective, and that it should be implemented to achieve high HY.

Microbiome involved in anaerobic hydrogen producing granules: A mini review

This mini review overviewed the latest updates on the anaerobic hydrogen fermentation using the granulation technology and the microbiome involved in the process. Additionally, the implication of various reactor design and their microbial changes were compared and provided the new insights on the role of microbiomes for rapid granules formation and long term stable operation in a continuous mode operation. The information provided in this communication would help to understand the key role of microbiomes and their importance in anaerobic hydrogen producing granular systems.

Fermentative hydrogen production from low-value substrates

Hydrogen is a promising energy source that is believed to replace the conventional energy sources e.g. fossil fuels over years. Hydrogen production methods can be divided into conventional production methods which depend mainly on fossil fuels and alternative production methods including electrolysis of water, biophotolysis and fermentation hydrogen production from organic waste materials. Compared to the conventional methods, the alternative hydrogen production methods are less energy intensive and negative-value substrates i.e. waste materials can be used to produce hydrogen. Among the alternative methods, fermentation process including dark and photo-fermentation has gained more attention because these processes are simple, waste materials can be utilized, and high hydrogen yields can be achieved. The fermentation process is affected by several parameters such as type of inoculum, pH, temperature, substrate type and concentration, hydraulic retention time, etc. In order to achieve optimum hydrogen yields and maximum substrate degradation, the operating conditions of the fermentation process must be optimized. In this review, two routes for biohydrogen production as dark and photo-fermentation are discussed. Dark/photo-fermentation technology is a new approach that can be used to increase the hydrogen yield and improve the energy recovery from organic wastes.

Enhancing Anaerobic Digestion: The Effect of Carbon Conductive Materials

Anaerobic digestion is a well-known technology which has been extensively studied to improve its performance and yield biogas from substrates. The application of different types of pre-treatments has led to an increase in biogas production but also in global energy demand. However, in recent years the use of carbon conductive materials as supplement for this process has been studied resulting in an interesting way for improving the performance of anaerobic digestion without greatly affecting its energy demand. This review offers an introduction to this interesting approach and covers the different experiences performed on the use of carbon conductive materials proposing it as a feasible alternative for the production of energy from biomass, considering also the integration of anaerobic digestion and thermal valorisation.

Single pot bioconversion of prairie cordgrass into biohydrogen by thermophiles

The aim of the present work was to use a thermophilic consortium for H₂ production using lignocellulosic biomass in a single pot. The thermophilic consortium, growing at 60 °C utilized both glucose and xylose, making it an ideal source of microbes capable of utilizing and fermenting both hexose and pentose sugars. The optimization of pH, temperature, and substrate concentration increased the H₂ production from 1.07 mmol H₂/g of prairie cordgrass (PCG) to 2.2 mmol H₂/g PCG by using the thermophilic consortium. A sequential cultivation of a thermostable lignocellulolytic enzyme producing strain Geobacillus sp. strain WSUCF1 (aerobic) with the thermophilic consortium (anaerobic) further increased H₂ production with PCG 3-fold (3.74 mmol H₂/g PCG). A single pot sequential culturing of aerobic and anaerobic microbes can be sustainable and advantageous for industrial scale production of biofuels.