New Materials Based on Cationic Porphyrins Conjugated to Chitosan or Titanium Dioxide: Synthesis, Characterization and Antimicrobial Efficacy

Bacterial resistance to antimicrobial photodynamic therapy: A critical update

Bacterial antibiotic resistance is one of the most significant challenges for public health. The increase in bacterial resistance, mainly due to microorganisms harmful to health, and the need to search for alternative treatments to contain infections that cannot be treated by conventional antibiotic therapy has been aroused. An alternative widely studied in recent decades is antimicrobial photodynamic therapy (aPDT), a treatment that can eliminate microorganisms through oxidative stress. Although this therapy has shown satisfactory results in infection control, it is still controversial in the scientific community whether bacteria manage to develop resistance after successive applications of aPDT. Thus, this work provides an overview of the articles that performed successive aPDT applications in models using bacteria published since 2010, focusing on sublethal dose cycles, highlighting the main PSs tested, and addressing the possible mechanisms for developing tolerance or resistance to aPDT, such as efflux pumps, biofilm formation, OxyR and SoxRS systems, catalase and superoxide dismutase enzymes and quorum sensing.

Synthesis and Photovoltaic Performance of β-Amino-Substituted Porphyrin Derivatives

New β-amino-substituted porphyrin derivatives bearing carboxy groups were synthesized and their performance as sensitizers in dye-sensitized solar cells (DSSC) was evaluated. The new compounds were obtained in good yields (63-74%) through nucleophilic aromatic substitution reactions with 3-sulfanyl- and 4-sulfanylbenzoic acids. Although the electrochemical studies indicated suitable HOMO and LUMO energy levels for use in DSSC, the devices fabricated with these compounds revealed a low power conversion efficiency (PCE) that is primarily due to the low open-circuit voltage (Voc) and short-circuit current density (Jsc) values.

Facile Synthesis of Cu-Doped TiO2 Particles for Accelerated Visible Light-Driven Antiviral and Antibacterial Inactivation

In this work, we present a facile and scalable hydrolysis-based route for the synthesis of copper-doped TiO2 particles for highly effective light-activated antiviral and antibacterial applications. The performance of the synthesized Cu-doped TiO2 particles is then evaluated using solution-phase antimicrobial photodynamic inactivation assays. We demonstrate that the Cu-doped TiO2 particles can successfully inactivate a wide range of pathogens with exposure to light for 90 min, including bacteria ranging from methicillin-resistant Staphylococcus aureus (99.9999%, ∼6 log units) to Klebsiella pneumoniae (99.93%, ∼3.3 log units), and viruses including feline calicivirus (99.94%, ∼3.4 log units) and HCoV-229E (99.996%, ∼4.6 log units), with the particles demonstrating excellent robustness toward photobleaching. Furthermore, a spray-coated polymer film, loaded with the synthesized Cu-doped TiO2 particles achieves inactivation of methicillin-resistant S. aureus up to 99.998% (∼4.8 log units). The presented results provide a clear advance forward in the use of metal-doped TiO2 for aPDI applications, including the scalable synthesis (kg/day) of well-characterized and robust particles, their facile incorporation into a nontoxic, photostable coating that may be easily and cheaply applied to a multitude of surfaces, and a broad efficacy against drug-resistant Gram-positive and Gram-negative bacteria, as well as against enveloped and nonenveloped viruses.

TMPyP-mediated photoinactivation of Pseudomonas aeruginosa improved in the presence of a cationic polymer

Pseudomonas aeruginosa is one of the most refractory organisms to antibiotic treatment and appears to be one of the least susceptible to photodynamic treatment. TMPyP is effective in the photoinactivation of P. aeruginosa, and the co-administration with the cationic polymer Eudragit®-E100 (Eu) potentiates this effect against isolates both sensitive and resistant to antibiotics. The fluorescent population (>98%) observed by flow cytometry after exposure to Eu + TMPyP remained unchanged after successive washings, indicating a stronger interaction/internalization of TMPyP in the bacteria, which could be attributed to the rapid neutralization of surface charges. TMPyP and Eu produced depolarization of the cytoplasmic membrane, which increased when both cationic compounds were combined. Using confocal laser scanning microscopy, heterogeneously distributed fluorescent areas were observed after TMPyP exposure, while homogeneous fluorescence and enhanced intensity were observed with Eu + TMPyP. The polymer caused alterations in the bacterial envelopes that contributed to a deeper and more homogeneous interaction/internalization of TMPyP, leading to a higher probability of damage by cytotoxic ROS and explaining the enhanced result of photodynamic inactivation. Therefore, Eu acts as an adjuvant without being by itself capable of eradicating this pathogen. Moreover, compared with other therapies, this combinatorial strategy with a polymer approved for pharmaceutical applications presents advantages in terms of toxicity risks.

Refining antimicrobial photodynamic therapy: effect of charge distribution and central metal ion in fluorinated porphyrins on effective control of planktonic and biofilm bacterial forms

Antibiotic resistance represents a pressing global health challenge, now acknowledged as a critical concern within the framework of One Health. Photodynamic inactivation of microorganisms (PDI) offers an attractive, non-invasive approach known for its flexibility, independence from microbial resistance patterns, broad-spectrum efficacy, and minimal risk of inducing resistance. Various photosensitizers, including porphyrin derivatives have been explored for pathogen eradication. In this context, we present the synthesis, spectroscopic and photophysical characteristics as well as antimicrobial properties of a palladium(II)-porphyrin derivative (PdF2POH), along with its zinc(II)- and free-base counterparts (ZnF2POH and F2POH, respectively). Our findings reveal that the palladium(II)-porphyrin complex can be classified as an excellent generator of reactive oxygen species (ROS), encompassing both singlet oxygen (Φ△ = 0.93) and oxygen-centered radicals. The ability of photosensitizers to generate ROS was assessed using a variety of direct (luminescence measurements) and indirect techniques, including specific fluorescent probes both in solution and in microorganisms during the PDI procedure. We investigated the PDI efficacy of F2POH, ZnF2POH, and PdF2POH against both Gram-negative and Gram-positive bacteria. All tested compounds proved high activity against Gram-positive species, with PdF2POH exhibiting superior efficacy, leading to up to a 6-log reduction in S. aureus viability. Notably, PdF2POH-mediated PDI displayed remarkable effectiveness against S. aureus biofilm, a challenging target due to its complex structure and increased resistance to conventional treatments. Furthermore, our results show that PDI with PdF2POH is more selective for bacterial than for mammalian cells, particularly at lower light doses (up to 5 J/cm2 of blue light illumination). This enhanced efficacy of PdF2POH-mediated PDI as compared to ZnF2POH and F2POH can be attributed to more pronounced ROS generation by palladium derivative via both types of photochemical mechanisms (high yields of singlet oxygen generation as well as oxygen-centered radicals). Additionally, PDI proved effective in eliminating bacteria within S. aureus-infected human keratinocytes, inhibiting infection progression while preserving the viability and integrity of infected HaCaT cells. These findings underscore the potential of metalloporphyrins, particularly the Pd(II)-porphyrin complex, as promising photosensitizers for PDI in various bacterial infections, warranting further investigation in advanced infection models.

Enhancing Visible-Light Photocatalysis with Pd(II) Porphyrin-Based TiO2 Hybrid Nanomaterials: Preparation, Characterization, ROS Generation, and Photocatalytic Activity

Novel hybrid TiO2-based materials were obtained by adsorption of two different porphyrins on the surface of nanoparticles-commercially available 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) and properly modified metalloporphyrin-5,10,15,20-tetrakis(2,6-difluoro-3-sulfophenyl)porphyrin palladium(II) (PdF2POH). The immobilization of porphyrins on the surface of TiO2 was possible due to the presence of sulfonyl groups. To further elevate the adsorption of porphyrin, an anchoring linker-4-hydroxybenzoic acid (PHBA)-was used. The synthesis of hybrid materials was proven by electronic absorption spectroscopy, dynamic light scattering (DLS), and photoelectrochemistry. Results prove the successful photosensitization of TiO2 to visible light by both porphyrins. However, the presence of the palladium ion in the modifier structure played a key role in strong adsorption, enhanced charge separation, and thus effective photosensitization. The incorporation of halogenated metalloporphyrins into TiO2 facilitates the enhancement of the comprehensive characteristics of the investigated materials and enables the evaluation of their performance under visible light. The effectiveness of reactive oxygen species (ROS) generation was also determined. Porphyrin-based materials with the addition of PHBA seemed to generate ROS more effectively than other composites. Interestingly, modifications influenced the generation of singlet oxygen for TPPS but not hydroxyl radical, in contrast to PdF2POH, where singlet oxygen generation was not influenced but hydroxyl radical generation was increased. Palladium (II) porphyrin-modified materials were characterized by higher photostability than TPPS-based nanostructures, as TPPS@PHBA-P25 materials showed the highest singlet oxygen generation and may be oxidized during light exposure. Photocatalytic activity tests with two model pollutants-methylene blue (MB) and the opioid drug tramadol (TRML)-confirmed the light dose-dependent degradation of those two compounds, especially PdF2POH@P25, which led to the virtually complete degradation of MB.

Switchable adhesive films of pullulan loaded with a deep eutectic solvent-curcumin formulation for the photodynamic treatment of drug-resistant skin infections

Antimicrobial photodynamic therapy (aPDT) is a potent tool to surpass the global rise of antimicrobial resistance; still, the effective topical administration of photosensitizers remains a challenge. Biopolymer-based adhesive films can safely extend the residence time of photosensitizers. However, their wide application is narrowed by their limited water absorption capacity and gel strength. In this study, pullulan-based films with a switchable character (from a solid film to an adhesive hydrogel) were developed. This was accomplished by the incorporation of a betaine-based deep eutectic solvent (DES) containing curcumin (4.4 μg.cm-2) into the pullulan films, which tuned the films' skin moisture absorption ability, and therefore they switch into an adhesive hydrogel capable of delivering the photosensitizer. The obtained transparent films presented higher extensibility (elongation at break up to 338.2%) than the pullulan counterparts (6.08%), when stored at 54% of relative humidity, and the corresponding hydrogels a 4-fold higher adhesiveness than commercial hydrogels. These non-cytotoxic adhesives allowed the inactivation (∼5 log reduction), down to the detection limit of the method, of multiresistant strains of Staphylococcus aureus in ex vivo skin samples. Overall, these materials are promising for aPDT in the treatment of resistant skin infections, while being easily removed from the skin.

Antibacterial and anti-corona virus (229E) activity of Nigella sativa oil combined with photodynamic therapy based on methylene blue in wound infection: in vitro and in vivo study

Microbial skin infections, antibiotic resistance, and poor wound healing are major problems, and new treatments are needed. Our study targeted solving this problem with Nigella sativa (NS) oil and photodynamic therapy based on methylene blue (MB-PDT). Antibacterial activity and minimum inhibitory concentration (MIC) were determined via agar well diffusion assay and broth microdilution, respectively. Transmission electron microscopy (TEM) proved deformations in Staphylococcus aureus ATCC 6538. Gas chromatography-mass spectrometry identified useful compounds that were suggested to be responsible for the potency of the oil. NS oil was tested as an antivirus against low pathogenic coronavirus (229E). Therapies examined, MB-PDT, NS, and MB-PDT + NS oil, to accelerate wound healing. The antibacterial efficacy against S. aureus was promising, with a MIC of 12.5% and TEM showing injured cells treated with NS oil. This oil inhibited 229E virus up to 42.85% and 32.14%. All tested therapies were successful in accelerating wound healing. The most successful was combined therapy (MB-PDT + NS oil), with a faster healing time. The combined therapy (MB-PDT + NS oil) reduced bacterial counts, which may be a key factor in accelerating wound healing. Skin wound histology was investigated; blood hematology and biochemical analysis did not change significantly after the safe combination treatment. A combination treatment could facilitate healing in a simple and inexpensive way in the future. Based on the results of the in vitro and in vivo studies, it was determined that NS oil had antibacterial and anti-corona virus activity when used in conjunction with photodynamic treatment based on methylene blue to treat wound infections.

Porphyrin Photosensitizers Grafted in Cellulose Supports: A Review

Cellulose is the most abundant natural biopolymer and owing to its compatibility with biological tissues, it is considered a versatile starting material for developing new and sustainable materials from renewable resources. With the advent of drug-resistance among pathogenic microorganisms, recent strategies have focused on the development of novel treatment options and alternative antimicrobial therapies, such as antimicrobial photodynamic therapy (aPDT). This approach encompasses the combination of photoactive dyes and harmless visible light, in the presence of dioxygen, to produce reactive oxygen species that can selectively kill microorganisms. Photosensitizers for aPDT can be adsorbed, entrapped, or linked to cellulose-like supports, providing an increase in the surface area, with improved mechanical strength, barrier, and antimicrobial properties, paving the way to new applications, such as wound disinfection, sterilization of medical materials and surfaces in different contexts (industrial, household and hospital), or prevention of microbial contamination in packaged food. This review will report the development of porphyrinic photosensitizers supported on cellulose/cellulose derivative materials to achieve effective photoinactivation. A brief overview of the efficiency of cellulose based photoactive dyes for cancer, using photodynamic therapy (PDT), will be also discussed. Particular attention will be devoted to the synthetic routes behind the preparation of the photosensitizer-cellulose functional materials.

Spectroscopic Investigations of Porphyrin-TiO2 Nanoparticles Complexes

This study presents the spectral characterization of TiO₂ nanoparticles (NPs) functionalized with three porphyrin derivatives: 5,10,15,20-(Tetra-4-aminophenyl) porphyrin (TAPP), 5,10,15,20-(Tetra-4-methoxyphenyl) porphyrin (TMPP), and 5,10,15,20-(Tetra-4-carboxyphenyl) porphyrin (TCPP). UV-Vis absorption and Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) spectroscopic studies of these porphyrins and their complexes with TiO₂ NPs were performed. In addition, the efficiency of singlet oxygen generation, the key species in photodynamic therapy, was investigated. UV-Vis absorption spectra of the NPs complexes showed the characteristic bands of porphyrins. These allowed us to determine the loaded porphyrins on TiO₂ NPs functionalized with porphyrins. FTIR-ATR revealed the formation of porphyrin-TiO₂ complexes, suggesting that porphyrin adsorption on TiO₂ may involve the pyrroles in the porphyrin ring, or the radicals of the porphyrin derivative. The quantum yield for singlet oxygen generation by the studied porphyrin complexes with TiO₂ was higher compared to bare porphyrins for TAPP and TMPP, while for the TCPP-TiO₂ NPs complex, a decrease was observed, but still maintained a good efficiency. The TiO₂ NPs conjugates can be promising candidates to be tested in photodynamic therapy in vitro assays.

Surgery plus photodynamic therapy for a diabetic patient with cutaneous infectious granuloma caused by Curvularia lunata

Curvularia lunata (C. lunata) can be easily found in environment and plants and rarely causes human infections. Antifungal agents have been the primary approach to treat such infections; however, adverse hepatotoxic reactions may require discontinuation of the long-term use of antifungal agents in patients with pre-existing liver diseases. New therapeutic approaches are thus needed to cope with these circumstances. Here, we report a 66-year-old diabetic female patient, suffering from a rapidly growing lesion on the nose for 2 months. The patient was diagnosed with cutaneous fungal infection caused by C. lunata, which was based on mycological study and ITS sequencing. The lesion was completely disappeared after a combination of surgery and 3 times of photodynamic therapy (PDT) with 5-aminolevulinic acid (ALA) at 9- day intervals. The patient did not receive any antifungal agents during the treatment. There was no recurrence at 6-month fellow-up. In the following in vitro study, C. Lunata growth was significantly inhibited by ALA-PDT treatment. Therapeutic success in this patent suggests that the ALA-PDT method could be a promising treatment for cutaneous fungal infection caused by C. Lunata and others.

Photoinactivation of Phage Phi6 as a SARS-CoV-2 Model in Wastewater: Evidence of Efficacy and Safety

The last two years have been marked by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic. This virus is found in the intestinal tract; it reaches wastewater systems and, consequently, the natural receiving water bodies. As such, inefficiently treated wastewater (WW) can be a means of contamination. The currently used methods for the disinfection of WW can lead to the formation of toxic compounds and can be expensive or inefficient. As such, new and alternative approaches must be considered, namely, photodynamic inactivation (PDI). In this work, the bacteriophage φ6 (or, simply, phage φ6), which has been used as a suitable model for enveloped RNA viruses, such as coronaviruses (CoVs), was used as a model of SARS-CoV-2. Firstly, to understand the virus’s survival in the environment, phage φ6 was subjected to different laboratory-controlled environmental conditions (temperature, pH, salinity, and solar and UV-B irradiation), and its persistence over time was assessed. Second, to assess the efficiency of PDI towards the virus, assays were performed in both phosphate-buffered saline (PBS), a commonly used aqueous matrix, and a secondarily treated WW (a real WW matrix). Third, as WW is generally discharged into the marine environment after treatment, the safety of PDI-treated WW was assessed through the determination of the viability of native marine water microorganisms after their contact with the PDI-treated effluent. Overall, the results showed that, when used as a surrogate for SARS-CoV-2, phage φ6 remains viable in different environmental conditions for a considerable period. Moreover, PDI proved to be an efficient approach in the inactivation of the viruses, and the PDI-treated effluent showed no toxicity to native aquatic microorganisms under realistic dilution conditions, thus endorsing PDI as an efficient and safe tertiary WW disinfection method. Although all studies were performed with phage φ6, which is considered a suitable model of SARS-CoV-2, further studies using SARS-CoV-2 are necessary; nevertheless, the findings show the potential of PDI for controlling SARS-CoV-2 in WW.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

Bioluminescent Models to Evaluate the Efficiency of Light-Based Antibacterial Approaches

The emergence of microbial resistance to antimicrobials among several common pathogenic microbial strains is an increasing problem worldwide. Thus, it is urgent to develop not only new antimicrobial therapeutics to fight microbial infections, but also new effective, rapid, and inexpensive methods to monitor the efficacy of these new therapeutics. Antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light (aBL) therapy are receiving considerable attention for their antimicrobial potential and represent realistic alternatives to antibiotics. To monitor the photoinactivation process provided by aPDT and aBL, faster and more effective methods are required instead of laborious conventional plating and overnight incubation procedures. Bioluminescent microbial models are very interesting in this context. Light emission from bioluminescent microorganisms is a highly sensitive indication of their metabolic activity and can be used to monitor, in real time, the effects of antimicrobial agents and therapeutics. This chapter reviews the efforts of the scientific community concerning the development of in vitro, ex vivo, and in vivo bioluminescent bacterial models and their potential to evaluate the efficiency of aPDT and aBL in the inactivation of bacteria.

Latest trends on photodynamic disinfection of Gram-negative bacteria: photosensitizer's structure and delivery systems

Antimicrobial resistance is threatening to overshadow last century's medical advances. Etiological agents of previously eradicated infectious diseases are now resurgent as multidrug-resistant strains, especially for Gram-negative strains. Finding new therapeutic solutions is a real challenge for our society. In this framework, Photodynamic Antimicrobial ChemoTherapy relies on the generation of toxic reactive oxygen species in the presence of light, oxygen, and a photosensitizer molecule. The use of reactive oxygen species is common for disinfection processes, using chemical agents, such as chlorine and hydrogen peroxide, and as they do not have a specific molecular target, it decreases the potential of tolerance to the antimicrobial treatment. However, light-driven generated reactive species result in an interesting alternative, as reactive species generation can be easily tuned with light irradiation and several PSs are known for their low environmental impact. Over the past few years, this topic has been thoroughly studied, exploring strategies based on single-molecule PSs (tetrapyrrolic compounds, dipyrrinate derivatives, metal complexes, etc.) or on conjunction with delivery systems. The present work describes some of the most relevant advances of the last 6 years, focusing on photosensitizers design, formulation, and potentiation, aiming for the disinfection of Gram-negative bacteria.

Applications of Fluorous Porphyrinoids: An Update†

Porphyrins and related macrocycles have been studied broadly for their applications in medicine and materials because of their tunable physicochemical, optoelectronic and magnetic properties. In this review article, we focused on the applications of fluorinated porphyrinoids and their supramolecular systems and summarized the reports published on these chromophores in the past 5-6 years. The commercially available fluorinated porphyrinoids: meso-perfluorophenylporphyrin (TPPF₂₀ ) perfluorophthalocyanine (PcF₁₆ ) and meso-perfluorophenylcorrole (CorF₁₅ ) have increased photo and oxidative stability due to the presence of fluoro groups. Because of their tunable properties and robustness toward oxidative damage these porphyrinoid-based chromophores continue to gain attention of researchers developing advanced functional materials for applications such as sensors, photonic devices, component for solar cells, biomedical imaging, theranostics and catalysts.

Photodynamic therapy combined with itraconazole against a case of cutaneous blastomycosis

Cutaneous blastomycosis is endemic to North America and is often caused by dimorphic fungi with spores that are inhaled, inoculated spores, or hyphae that infect immunosuppressed and healthy people. It is sporadic and described as a universal imitator with morphological manifestations as erythema, nodules, and ulcers. Our case demonstrated a 69-year-old female bitten by her pet dog who was then diagnosed with cutaneous blastomycosis through social history and detailed laboratory examinations. She experienced a prolonged failure with antibacterial treatment, negative stool and tissue culture, and chronic inflammatory cell infiltrates on tissue pathology. High-throughput sequencing was performed and showed evidence of Blastomyces dermatitidis aetiology. Photodynamic therapy combined with oral itraconazole was administered, and the patient recovered in a short time. Our case presents inoculated cutaneous blastomycosis and a treatment approach in which photodynamic therapy combined with oral itraconazole significantly reduced the duration of disease treatment and affords a promising choice for the treatment of cutaneous blastomycosis.

Coordination Complexes as a New Generation Photosensitizer for Photodynamic Anticancer Therapy

Photodynamic therapy (PDT) has become an alternative to standard cancer treatment methods such as surgery, chemotherapy and radiotherapy. The uniqueness of this method relies on the possibility of using various photosensitizers (PS) that absorb and convert light emission in radical oxygen-derived species (ROS). They can be present alone or in the presence of other compounds such as metal organic frameworks (MOFs), non-tubules or polymers. The interaction between DNA and metal-based complexes plays a key role in the development of new anti-cancer drugs. The use of coordination compounds in PDT has a significant impact on the amount ROS generated, quantum emission efficiency (Φem) and phototoxic index (PI). In this review, we will attempt to systematically review the recent literature and analyze the coordination complexes used as PS in PDT. Finally, we compared the anticancer activities of individual coordination complexes and discuss future perspectives. So far, only a few articles link so many transition metal ion coordination complexes of varying degrees of oxidation, which is why this review is needed by the scientific community to further expand this field worldwide. Additionally, it serves as a convenient collection of important, up-to-date information.

Factors Determining the Susceptibility of Bacteria to Antibacterial Photodynamic Inactivation

Photodynamic inactivation of microorganisms (aPDI) is an excellent method to destroy antibiotic-resistant microbial isolates. The use of an exogenous photosensitizer or irradiation of microbial cells already equipped with endogenous photosensitizers makes aPDI a convenient tool for treating the infections whenever technical light delivery is possible. Currently, aPDI research carried out on a vast repertoire of depending on the photosensitizer used, the target microorganism, and the light delivery system shows efficacy mostly on in vitro models. The search for mechanisms underlying different responses to photodynamic inactivation of microorganisms is an essential issue in aPDI because one niche (e.g., infection site in a human body) may have bacterial subpopulations that will exhibit different susceptibility. Rapidly growing bacteria are probably more susceptible to aPDI than persister cells. Some subpopulations can produce more antioxidant enzymes or have better performance due to efficient efflux pumps. The ultimate goal was and still is to identify and characterize molecular features that drive the efficacy of antimicrobial photodynamic inactivation. To this end, we examined several genetic and biochemical characteristics, including the presence of individual genetic elements, protein activity, cell membrane content and its physical properties, the localization of the photosensitizer, with the result that some of them are important and others do not appear to play a crucial role in the process of aPDI. In the review, we would like to provide an overview of the factors studied so far in our group and others that contributed to the aPDI process at the cellular level. We want to challenge the question, is there a general pattern of molecular characterization of aPDI effectiveness? Or is it more likely that a photosensitizer-specific pattern of molecular characteristics of aPDI efficacy will occur?

The Role of Porphyrinoid Photosensitizers for Skin Wound Healing

Microorganisms, usually bacteria and fungi, grow and spread in skin wounds, causing infections. These infections trigger the immune system and cause inflammation and tissue damage within the skin or wound, slowing down the healing process. The use of photodynamic therapy (PDT) to eradicate microorganisms has been regarded as a promising alternative to anti-infective therapies, such as those based on antibiotics, and more recently, is being considered for skin wound-healing, namely for infected wounds. Among the several molecules exploited as photosensitizers (PS), porphyrinoids exhibit suitable features for achieving those goals efficiently. The capability that these macrocycles display to generate reactive oxygen species (ROS) gives a significant contribution to the regenerative process. ROS are responsible for avoiding the development of infections by inactivating microorganisms such as bacteria but also by promoting cell proliferation through the activation of stem cells which regulates inflammatory factors and collagen remodeling. The PS can act solo or combined with several materials, such as polymers, hydrogels, nanotubes, or metal-organic frameworks (MOF), keeping both the microbial photoinactivation and healing/regenerative processes' effectiveness. This review highlights the developments on the combination of PDT approach and skin wound healing using natural and synthetic porphyrinoids, such as porphyrins, chlorins and phthalocyanines, as PS, as well as the prodrug 5-aminolevulinic acid (5-ALA), the natural precursor of protoporphyrin-IX (PP-IX).

An Insight into the Role of Non-Porphyrinoid Photosensitizers for Skin Wound Healing

The concept behind photodynamic therapy (PDT) is being successfully applied in different biomedical contexts such as cancer diseases, inactivation of microorganisms and, more recently, to improve wound healing and tissue regeneration. The effectiveness of PDT in skin treatments is associated with the role of reactive oxygen species (ROS) produced by a photosensitizer (PS), which acts as a "double agent". The release of ROS must be high enough to prevent microbial growth and, simultaneously, to accelerate the immune system response by recruiting important regenerative agents to the wound site. The growing interest in this subject is reflected by the increasing number of studies concerning the optimization of relevant experimental parameters for wound healing via PDT, namely, light features, the structure and concentration of the PS, and the wound type and location. Considering the importance of developing PSs with suitable features for this emergent topic concerning skin wound healing, in this review, a special focus on the achievements attained for each PS class, namely, of the non-porphyrinoid type, is given.

Prospects on Nano-Based Platforms for Antimicrobial Photodynamic Therapy Against Oral Biofilms

Objective: This review clusters the growing field of nano-based platforms for antimicrobial photodynamic therapy (aPDT) targeting pathogenic oral biofilms and increase interactions between dental researchers and investigators in many related fields. Background data: Clinically relevant disinfection of dental tissues is difficult to achieve with aPDT alone. It has been found that limited penetrability into soft and hard dental tissues, diffusion of the photosensitizers, and the small light absorption coefficient are contributing factors. As a result, the effectiveness of aPDT is reduced in vivo applications. To overcome limitations, nanotechnology has been implied to enhance the penetration and delivery of photosensitizers to target microorganisms and increase the bactericidal effect. Materials and methods: The current literature was screened for the various platforms composed of photosensitizers functionalized with nanoparticles and their enhanced performance against oral pathogenic biofilms. Results: The evidence-based findings from the up-to-date literature were promising to control the onset and the progression of dental biofilm-triggered diseases such as dental caries, endodontic infections, and periodontal diseases. The antimicrobial effects of aPDT with nano-based platforms on oral bacterial disinfection will help to advance the design of combination strategies that increase the rate of complete and durable clinical response in oral infections. Conclusions: There is enthusiasm about the potential of nano-based platforms to treat currently out of the reach pathogenic oral biofilms. Much of the potential exists because these nano-based platforms use unique mechanisms of action that allow us to overcome the challenging of intra-oral and hard-tissue disinfection.

Photodynamic treatment of melanoma cells using aza-dipyrromethenes as photosensitizers

In this study, we report for the first time the use of four aza-dipyrromethenes (ADPMs) as photosensitizers for cancer PDT. The synthesis and characterization of the ADPMs and their photodynamic action against B16F10 melanoma cells were assessed. ADPM 2 is the best singlet oxygen generator and the most phototoxic (at 2.5 μM) towards B16F10 cells.

Antimicrobial Photodynamic Therapy in the Control of COVID-19

Antimicrobial photodynamic therapy (aPDT), using well known, safe and cost-effective photosensitizers, such as phenothiazines, e.g., methylene blue (MB), or porphyrins, e.g., protoporphyrin-IX (PP-IX), might help to mitigate the COVID-19 either to prevent infections or to develop photoactive fabrics (e.g., masks, suits, gloves) to disinfect surfaces, air and wastewater, under artificial light and/or natural sunlight.

Nanocomposites for X-Ray Photodynamic Therapy

Photodynamic therapy (PDT) has long been known as an effective method for treating surface cancer tissues. Although this technique is widely used in modern medicine, some novel approaches for deep lying tumors have to be developed. Recently, deeper penetration of X-rays into tissues has been implemented, which is now known as X-ray photodynamic therapy (XPDT). The two methods differ in the photon energy used, thus requiring the use of different types of scintillating nanoparticles. These nanoparticles are known to convert the incident energy into the activation energy of a photosensitizer, which leads to the generation of reactive oxygen species. Since not all photosensitizers are found to be suitable for the currently used scintillating nanoparticles, it is necessary to find the most effective biocompatible combination of these two agents. The most successful combinations of nanoparticles for XPDT are presented. Nanomaterials such as metal-organic frameworks having properties of photosensitizers and scintillation nanoparticles are reported to have been used as XPDT agents. The role of metal-organic frameworks for applying XPDT as well as the mechanism underlying the generation of reactive oxygen species are discussed.

Synthesis, characterization, and the antioxidant activity of the acetylated chitosan derivatives containing sulfonium salts

In this study, a new class of chitosan derivatives possessing sulfonium salts was synthesized, and characterized by FT-IR, ¹H NMR, ¹³C NMR, and elemental analyses. IR spectra, ¹H NMR and ¹³C NMR of the structural units of these polymers validated the designed chitosan derivatives were successfully synthesized. In addition, the antioxidant potential of chitosan and chitosan derivatives was assessed in vitro, screened by 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging, hydroxyl radical scavenging, and superoxide radical scavenging, respectively. Results revealed that designed chitosan derivatives could effectively scavenge DPPH radical, hydroxyl radical, and superoxide radical with inhibition rate of more than 90% at 1.6 mg/mL, higher than chitosan. Moreover, in the cytotoxicity assay, no cytotoxicity was observed for the L929 cells with chitosan and its derivatives at all the testing concentrations. These results indicated that the acetylated chitosan derivatives containing sulfonium salts may be a promising natural antioxidant for the pharmaceutics, food, cosmetics and agriculture management.

Photodegradation of Antibiotics by Noncovalent Porphyrin-Functionalized TiO2 in Water for the Bacterial Antibiotic Resistance Risk Management

Antibiotics represent essential drugs to contrast the insurgence of bacterial infections in humans and animals. Their extensive use in livestock farming, including aquaculture, has improved production performances and food safety. However, their overuse can implicate a risk of water pollution and related antimicrobial resistance. Consequently, innovative strategies for successfully removing antibiotic contaminants have to be advanced to protect human health. Among them, photodegradation TiO₂-driven under solar irradiation appears not only as a promising method, but also a sustainable pathway. Hence, we evaluated several composite TiO₂ powders with H₂TCPP, CuTCPP, ZnTCPP, and SnT4 porphyrin for this scope in order to explore the effect of porphyrins sensitization on titanium dioxide. The synthesis was realized through a fully non-covalent functionalization in water at room conditions. The efficacy of obtained composite materials was also tested in photodegrading oxolinic acid and oxytetracycline in aqueous solution at micromolar concentrations. Under simulated solar irradiation, TiO₂ functionalized with CuTCPP has shown encouraging results in the removal of oxytetracycline from water, by opening the way as new approaches to struggle against antibiotic's pollution and, finally, to represent a new valuable tool of public health.

Surface Modification of Nanocrystalline TiO2 Materials with Sulfonated Porphyrins for Visible Light Antimicrobial Therapy

Highly-active, surface-modified anatase TiO2 nanoparticles were successfully synthesized and characterized. The morphological and optical properties of the obtained (metallo)porphyrin@qTiO2 materials were evaluated using absorption and fluorescence spectroscopy, scanning electron microscopy (SEM) imaging, and dynamic light scattering (DLS). These hybrid nanoparticles efficiently generated reactive oxygen species (ROS) under blue-light irradiation (420 ± 20 nm) and possessed a unimodal size distribution of 20–70 nm in diameter. The antimicrobial performance of the synthetized agents was examined against Gram-negative and Gram-positive bacteria. After a short-term incubation of microorganisms with nanomaterials (at 1 g/L) and irradiation with blue-light at a dose of 10 J/cm2, 2–3 logs of Escherichia coli, and 3–4 logs of Staphylococcus aureus were inactivated. A further decrease in bacteria viability was observed after potentiation photodynamic inactivation (PDI), either by H2O2 or KI, resulting in complete microorganism eradication even when using low material concentration (from 0.1 g/L). SEM analysis of bacteria morphology after each mode of PDI suggested different mechanisms of cellular disruption depending on the type of generated oxygen and/or iodide species. These data suggest that TiO2-based materials modified with sulfonated porphyrins are efficient photocatalysts that could be successfully used in biomedical strategies, most notably, photodynamic inactivation of microorganisms.

Porphyrin as Diagnostic and Therapeutic Agent

The synthesis and application of porphyrins has seen a huge shift towards research in porphyrin bio-molecular based systems in the past decade. The preferential localization of porphyrins in tumors, as well as their ability to generate reactive singlet oxygen and low dark toxicities has resulted in their use in therapeutic applications such as photodynamic therapy. However, their inherent lack of bio-distribution due to water insolubility has shifted research into porphyrin-nanomaterial conjugated systems to address this challenge. This has broadened their bio-applications, viz. bio-sensors, fluorescence tracking, in vivo magnetic resonance imaging (MRI), and positron emission tomography (PET)/CT imaging to photo-immuno-therapy just to highlight a few. This paper reviews the unique theranostic role of porphyrins in disease diagnosis and therapy. The review highlights porphyrin conjugated systems and their applications. The review ends by bringing current challenges and future perspectives of porphyrin based conjugated systems and their respective applications into light.