Touch DNA Sampling Methods: Efficacy Evaluation and Systematic Review

mRNA for Body Fluid and Individual Identification

Biological stains are one of the most important pieces of evidence, playing a multifaceted role in forensic investigations. An integral facet of forensic practice involves the identification of body fluids, typically achieved through chemical and enzymatic reactions. In recent decades, the introduction of mRNA markers has been posited as a pivotal advancement to augment the capabilities of body fluid identification (BFID). The mRNA coding region single-nucleotide polymorphisms (cSNPs) also present notable advantages, particularly in the task of individual identification. Here, we review the specificity and stability of mRNA markers in the context of BFID and the prowess of mRNA polymorphism in individual identification. Additionally, innovative methods for mRNA detection are discussed.

The efficacy of Diamond™ nucleic acid dye-stained cell counting techniques for forensic application

Touch DNA is one of the most common types of biological material collected during criminal investigations. Diamond™ Nucleic Acid Dye (DD) has been shown to aid in touch sample visualisation and target sampling. It has also been used as a method of shedder categorisation that is cheaper and quicker than DNA methods. However, the DD method routinely involves manual cell counting, which can result in intra and inter-person variability similar to other manual techniques used in forensic science, for example, fingerprint identification. Additionally, DD based shedder categorisation involves counting cells in a portion of the touch deposit to extrapolate an individual's shedder status, and the sampling effect of such estimations is currently unknown. The present study tested different data analysis aspects of the DD method, including counting variability within and between people, shedder classification differences based on different counting methods (entire thumbprint, sub-section of a print with most cells, sub-section of a print deemed most representative of the entire thumbprint, and random sections), the use of ImageJ software to semi-automate counting and the use and extension of the DD method for investigating DNA Transfer, Persistence, Prevalence and Recovery (DNA-TPPR). The results of this study show that there are meaningful differences observed during counting processes both between and within people. These differences tended to increase as the factor of time, or the duration of counting, rather than the complexity of cell deposits being assessed. Investment in cell counting software that eliminates personal factors, such as boredom fatigue, can remedy most of these issues, however, will require optimisation, such as fibre recognition. Shedder testing was shown to be affected by the choice of sampling and categorisation methods, and suggested that using an entire finger or larger section size can provide increased precision. Finally, inverted worn gloves stained with DD may provide an acceptable alternative for hands in DNA-TPPR investigations, providing an interesting alternative for future research.

Trace DNA and its persistence on various surfaces: A long term study investigating the influence of surface type and environmental conditions - Part two, non-metals

The work presented herein is the second part of a large-scale persistence project aimed at identifying trends in trace DNA persistence. This study aims to show how different environmental storage conditions and target surface characteristics influence the persistence of cellular and cell free DNA (cfDNA) over time. To eliminate variation within the experiment, we used a proxy DNA deposit consisting of a synthetic fingerprint solution, cellular DNA, and/or cfDNA. Samples were collected and analysed from eight non-metal surfaces over the course of 1 year (27 time points) under three different environmental storage conditions. The results of this experiment show that surface characteristics in conjunction with DNA type greatly influence DNA persistence. Variation in the amount of DNA recovered over time was greatly influenced by surface porosity. CfDNA persisted at significantly higher levels on non-porous surfaces, and cellular DNA persisted at higher levels on porous items. Furthermore, statistically significant differences in DNA persistence were found among the items classified as non-porous surfaces and among the items classified as porous surfaces. Additionally, this study showed that the sample storage environment had a larger impact on DNA persistence than previously observed for metal surfaces [1]. When considering DNA type, cellular DNA was shown to persist for longer than cfDNA and persistence as a whole appears to be better when DNA is deposited alone rather than in mixtures. Unsurprisingly, it was found that the amount of DNA recovered from trace deposits decreased over time. However, DNA decay is highly dependent on the surface type and exhibits higher variability at short time points and on porous surfaces. For each of the surfaces tested, DNA persisted 1 year past deposition (in some combination of DNA type and environmental condition), except for wood, on which DNA did not persist in any capacity past four months. This data is intended to add to our understanding of DNA persistence and the factors which affect it.

Developing a Machine Learning 'Smart' Polymerase Chain Reaction Thermocycler Part 2: Putting the Theoretical Framework into Practice

The introduction of PCR into forensic science and the rapid increases in the sensitivity, specificity and discrimination power of DNA profiling that followed have been fundamental in shaping the field of forensic biology. Despite these developments, the challenges associated with the DNA profiling of trace, inhibited and degraded samples remain. Thus, any improvement to the performance of sub-optimal samples in DNA profiling would be of great value to the forensic community. The potential exists to optimise the PCR performance of samples by altering the cycling conditions used. If the effects of changing cycling conditions upon the quality of a DNA profile can be well understood, then the PCR process can be manipulated to achieve a specific goal. This work is a proof-of-concept study for the development of a smart PCR system, the theoretical foundations of which are outlined in part 1 of this publication. The first steps needed to demonstrate the performance of our smart PCR goal involved the manual alteration of cycling conditions and assessment of the DNA profiles produced. In this study, the timing and temperature of the denaturation and annealing stages of the PCR were manually altered to achieve the goal of reducing PCR runtime while maintaining an acceptable quality and quantity of DNA product. A real-time feedback system was also trialled using an STR PCR and qPCR reaction mix, and the DNA profiles generated were compared to profiles produced using the standard STR PCR kits. The aim of this work was to leverage machine learning to enable real-time adjustments during a PCR, allowing optimisation of cycling conditions towards predefined user goals. A set of parameters was found that yielded similar results to the standard endpoint PCR methodology but was completed 30 min faster. The development of an intelligent system would have significant implications for the various biological disciplines that are reliant on PCR technology.

Impact of swabbing solutions on the recovery of biological material from non-porous surfaces

Cotton swabs are one of the most effective methods of retrieving biological evidence. The efficiency of swab-based DNA recovery is impacted by many factors, such as the swabbing technique, source of DNA and volume and type of wetting solution used to moisten the swab head. This study aimed to evaluate a series of different swab-moistening solutions. The types of swabbing solutions included buffers, detergent-based solutions, and chelating agents. The DNA deposits, including cell-free DNA, cellular DNA, blood, and saliva, were collected from three non-porous surfaces: plastic, glass, and metal. The difference in the performance of the swab-wetting solutions was heavily influenced by the type of biological fluid, with the chelating agents, EGTA and EDTA, being the most suitable for recovering DNA from saliva and blood samples. Conversely, water and detergent-based solutions were more appropriate for cell-free and cellular DNA material likely to be found in trace DNA deposits.

Recovery of DNA from acetaminophen exploring physical state and sampling methods

Research into the recovery of DNA from illicit drug samples has shown it is possible to get forensically useful profiles from such substrates. However, it is not yet known if the different physical states that drugs can be found in influences the quantity and quality of DNA that can be recovered or what is the best sampling method to adopt for powdered samples. This research used acetaminophen in four different states - large crystalline, powder, in solution, or residue - to determine the efficacy of current DNA technology in recovery and analysis of the resulting sample. Five replicates of each were prepared. Human blood was deposited on or mixed with the drug and left for 1 hour. The surface of the drug was sampled by wet/dry swabbing (where appropriate), or the entire sample was deposited in a tube, and the DNA then extracted using DNA-IQ™. The amount of DNA recovered (ng), degradation index, number of PCR cycles (Ct) required for the IPC to reach threshold, number of alleles in the DNA profile and average peak height (APH) were assessed. All samples, irrespective of the physical state they were collected from, returned full DNA profiles that corresponded to the DNA profile of the blood donor, with no degradation or inhibition detected. It was also found the wet/dry swabbing method returned higher levels of DNA than inclusion of the entire sample into the tube for powdered acetaminophen and the appropriate method to use will be dependent on casework circumstances. The findings of this research further develops our understanding of the recovery of DNA from drugs, and supports the need for further investigation to understand under what conditions DNA can be recovered from illicit substances.

Investigative use of human environmental DNA in forensic genetics

Individuals leave behind traces of their DNA wherever they go. DNA can be transferred to surfaces and items upon touch, can be released into the air, and may be deposited in indoor dust. The mere presence of individuals in a location is sufficient to facilitate either direct or indirect DNA transfer into the surrounding environment. In this study, we analyzed samples recovered from commonly touched surfaces such as light switches and door handles in an office environment. We evaluated two different methods to isolate DNA and co-extract DNA and RNA from the samples. DNA profiles were compared to the references of the inhabitants of the different locations and were analyzed taking into consideration the type of sampled surface, sampling location and information about the activities in a room during the sampling day. Results from DNA samples collected from surfaces were also compared to those from air and dust samples collected in parallel from the same areas. We characterized the amount and composition of DNA found on various surfaces and showed that surface DNA sampling can be used to detect occupants of a location. The results also indicate that combining information from environmental samples collected from different DNA sources can improve our understanding of DNA transfer events in an indoor setting. This study further demonstrates the potential of human environmental DNA as an investigative tool in forensic genetics.

PCR in Forensic Science: A Critical Review

The polymerase chain reaction (PCR) has played a fundamental role in our understanding of the world, and has applications across a broad range of disciplines. The introduction of PCR into forensic science marked the beginning of a new era of DNA profiling. This era has pushed PCR to its limits and allowed genetic data to be generated from trace DNA. Trace samples contain very small amounts of degraded DNA associated with inhibitory compounds and ions. Despite significant development in the PCR process since it was first introduced, the challenges of profiling inhibited and degraded samples remain. This review examines the evolution of the PCR from its inception in the 1980s, through to its current application in forensic science. The driving factors behind PCR evolution for DNA profiling are discussed along with a critical comparison of cycling conditions used in commercial PCR kits. Newer PCR methods that are currently used in forensic practice and beyond are examined, and possible future directions of PCR for DNA profiling are evaluated.

The impact of substrate characteristics on the collection and persistence of biological materials, and their implications for forensic casework

This study assessed the level of nucleic acid persistence on the substrate pre-, and post-swabbing, in order to assess whether biological materials (touch, saliva, semen, and blood) are collected differently depending on the substrate characteristics. A total of 48 samples per deposit and substrate variety (n = 384) were assessed by tracking the persistence of nucleic acid using Diamond™ Nucleic Acid Dye (DD) staining and Polilight photography. The number of DD nucleic acid fluorescent complexes formed post-staining were counted (fluorescent count) and in conjunction with the fluorescence signal intensity (DD nucleic acid complex accumulation) used to estimate the level of nucleic acid persistence on substrates. Touch deposits have shown to be the most persistent deposit with strong adhesion capabilities on both substrate verities. Saliva displayed a higher persistence than semen and/or blood. Semen displayed a high collection efficiency as well as a high fluorescence signal intensity. Blood displayed a low persistence on both substrates with a superior collection efficiency that may also indicate a higher probability to become dislodged from surfaces given a particular activity. Our research has shown that the persistence and recovery of biological deposits is not only measurable but more importantly, may have the potential to be estimated, as such, may build an understanding that can provide valuable guidance for collection efficiency evaluations, and the assessing of the probability of particular profiles, given alternate propositions of means of transfer occurring.

Trace DNA Transfer in Co-Working Spaces: The Importance of Background DNA Analysis

The presence of background DNA (bgDNA) can hinder the evaluation of DNA evidence at the activity level, especially when the suspect is expected to be retrieved due to their habitual occupation of the investigated environment. Based on real-life casework circumstances, this study investigates the prevalence, composition, origin, and probable transfer routes of bgDNA found on personal items in situations where their owner and person of interest (POI) share the same workspace. Baseline values of bgDNA were evaluated on the participants' personal items. Secondary and higher degree transfer scenarios of non-self DNA deposition were also investigated. The DNA from co-workers and co-inhabiting partners can be recovered from an individual's personal belongings. Non-self DNA present on the hands and deposited on a sterile surface can generate uninformative profiles. The accumulation of foreign DNA on surfaces over time appears to be crucial for the recovery of comparable profiles, resulting in detectable further transfer onto other surfaces. For a thorough evaluation of touch DNA traces at the activity level, it is necessary to collect information not only about DNA transfer probabilities but also about the presence of the POI as part of the 'baseline' bgDNA of the substrates involved.

Comparison of swabbing and cutting-out DNA collection methods from cotton, paper, and cardboard surfaces

Choosing an inappropriate method of sample collection can often have a detrimental impact on DNA recovery. Multiple studies highlight the importance of selecting the recovery method based on the type of surface the DNA sample is located on. This study aimed to investigate the efficacy of sample collection via the single cotton swabbing method in comparison to recovery directly from the material cut from the surface. The three types of surfaces included cotton, paper, and cardboard. DNA sources comprised cell-free and cellular DNA, as well as blood and saliva as examples of body fluids commonly encountered at crime scenes. The data analysis revealed that the cutting-out method resulted in higher DNA recovery from all but cardboard surfaces, making it the more efficient collection method. Despite its limitations, the cutting-out method should be considered as the DNA recovery method of choice when suitable.

Indirect DNA Transfer and Forensic Implications: A Literature Review

Progress in DNA profiling techniques has made it possible to detect even the minimum amount of DNA at a crime scene (i.e., a complete DNA profile can be produced using as little as 100 pg of DNA, equivalent to only 15-20 human cells), leading to new defense strategies. While the evidence of a DNA trace is seldom challenged in court by a defendant's legal team, concerns are often raised about how the DNA was transferred to the location of the crime. This review aims to provide an up-to-date overview of the experimental work carried out focusing on indirect DNA transfer, analyzing each selected paper, the experimental method, the sampling technique, the extraction protocol, and the main results. Scopus and Web of Science databases were used as the search engines, including 49 papers. Based on the results of this review, one of the factors that influence secondary transfer is the amount of DNA shed by different individuals. Another factor is the type and duration of contact between individuals or objects (generally, more intimate or prolonged contact results in more DNA transfer). A third factor is the nature and quality of the DNA source. However, there are exceptions and variations depending on individual characteristics and environmental conditions. Considering that secondary transfer depends on multiple factors that interact with each other in unpredictable ways, it should be considered a complex and dynamic phenomenon that can affect forensic investigation in various ways, for example, placing a subject at a crime scene who has never been there. Correct methods and protocols are required to detect and prevent secondary transfer from compromising forensic evidence, as well as the correct interpretation through Bayesian networks. In this context, the definition of well-designed experimental studies combined with the use of new forensic techniques could improve our knowledge in this challenging field, reinforcing the value of DNA evidence in criminal trials.

Current State of Milk, Dairy Products, Meat and Meat Products, Eggs, Fish and Fishery Products Authentication and Chemometrics

Food fraud is a matter of major concern as many foods and beverages do not follow their labelling. Because of economic interests, as well as consumers' health protection, the related topics, food adulteration, counterfeiting, substitution and inaccurate labelling, have become top issues and priorities in food safety and quality. In addition, globalized and complex food supply chains have increased rapidly and contribute to a growing problem affecting local, regional and global food systems. Animal origin food products such as milk, dairy products, meat and meat products, eggs and fish and fishery products are included in the most commonly adulterated food items. In order to prevent unfair competition and protect the rights of consumers, it is vital to detect any kind of adulteration to them. Geographical origin, production methods and farming systems, species identification, processing treatments and the detection of adulterants are among the important authenticity problems for these foods. The existence of accurate and automated analytical techniques in combination with available chemometric tools provides reliable information about adulteration and fraud. Therefore, the purpose of this review is to present the advances made through recent studies in terms of the analytical techniques and chemometric approaches that have been developed to address the authenticity issues in animal origin food products.

Impact of storage conditions and time on DNA yield from ammunition cartridges

Recovery of suitable amounts of DNA from ammunition cartridges for short tandem repeat (STR) or mitochondrial (mt) DNA analysis has been a challenge for crime laboratories. The metal composition of cartridge cases and projectiles exposes the DNA to harmful ions that damage and ultimately degrade the DNA such that it cannot be effectively amplified. The current study assessed the impact of time and storage conditions on touch DNA deposited on cartridge components of varying metal content: aluminum, nickel, brass, and copper. Elevated humidity levels facilitated greater DNA degradation and loss compared to low humidity (or "dry") conditions, indicating that recovered cartridge component evidence should be stored in a low-humidity environment immediately after collection, preferably with a desiccant. As expected, a relationship was observed between the amount of time elapsed since the cartridge components were handled and the associated DNA yield. Interestingly, while yields dropped considerably in the first 48-96 h post-handling, regardless of the storage conditions, a layering effect was observed that helps maintain a relatively constant level of surface DNA over extended periods of time. An apparent layering effect was also observed on cartridge components following multiple surface depositions, where yields were two times higher than single deposition samples at similar timepoints. Overall, these findings suggest that storage conditions and a layering affect play an important role in the preservation of DNA on ammunition components.

Point-of-Care Testing of the MTF1 Osteoarthritis Biomarker Using Phenolphthalein-Soaked Swabs

Osteoarthritis (OA) is the most common joint disease, which accompanies pain and inconvenience in daily life owing to degradation of cartilage and adjacent tissues. In this study, we propose a simple point-of-care testing (POCT) kit for the detection of the MTF1 OA biomarker to achieve on-site clinical diagnosis of OA. The kit contains an FTA card for patient sample treatments, a sample tube for loop-mediated isothermal amplification (LAMP), and a phenolphthalein-soaked swab for naked eye detection. The MTF1 gene was isolated from synovial fluids using an FTA card and amplified using the LAMP method at 65 °C for 35 min. A test part of the phenolphthalein-soaked swab was decolorized in the presence of the MTF1 gene due to the pH change after the LAMP, but the color remained pink in the absence of the MTF1 gene. The control part of the swab served as a reference color in relation to the test part. When real-time LAMP (RT-LAMP), gel electrophoresis, and colorimetric detection of the MTF1 gene were performed, the limit of detection (LOD) was confirmed at 10 fg/μL, and the overall processes were completed in 1 h. The detection of an OA biomarker in the form of POCT was reported for the first time in this study. The introduced method is expected to serve as a POCT platform directly applicable by clinicians for easy and rapid identification of OA.

Preliminary Study: DNA Transfer and Persistence on Non-Porous Surfaces Submerged in Spring Water

Submerged items are often thought to lack evidentiary value. However, previous studies have shown the ability to recover DNA from submerged porous items for upwards of six weeks. The crevices or interweaving fibers in porous items are thought to protect DNA from being washed away. It is hypothesized that, because non-porous surfaces do not have the same traits that might aid in DNA retention, then DNA quantities and the number of donor alleles recovered would decrease over longer submersion periods. Additionally, it is hypothesized that DNA quantity and the number of alleles would be negatively affected by flow conditions. Neat saliva of known DNA quantity was applied to glass slides and exposed to stagnant and flowing spring water to observe the effects on both DNA quantity and STR detection. Results supported that DNA deposited onto glass and subsequently submerged in water experienced a decrease in DNA quantity over time, yet submersion did not have as strong of a negative effect on the detected amplification product. Additionally, an increase in DNA quantity and detected amplification product from designated blank slides (no initial DNA added) could indicate the possibility of DNA transfer.

Systematic Review of Penetrating Cardiac Injury by a Firearm: Forensic Implications

Penetrating injuries of the heart, named penetrating cardiac injury (PCI), may cause hemorrhagic shock as well as cardiac tamponade, leading to death if not treated immediately. This systematic review aims to highlight the main aspects of penetrating cardiac injuries after firearm wounds. The cases of 39 subjects (age 37.05 + 15.4) were selected (6 fatal cases). Specifically, 4/39 cases involved subjects under 18 y.o.; analyzing the entrance wound, in 30/39 cases it was located in the anterior chest, 4/39 in the posterior chest, 3/39 in the shoulder/axilla area, 1/39 in the neck, and 1/39 in the pelvis (gluteus). The exit wound was found in only 3/39 cases. Several factors may influence the prognosis: firstly, prompt intervention represents a crucial point, then considering the complications related to PCI, the most important are myocardial infarction, and projectile migration with embolization. The mortality rate is related to: (1) area and severity of the heart injury; (2) duration of transport and intervention; (3) contemporary lesion to other organ/s; (4) the quantity of blood lost; (5) and presence/absence of cardiac tamponade. Based on these findings, a correct approach in the management of PCI may be considered important from a forensic point of view, both as regards to medical liability and from the trial perspective.