Environmental Impact of Surgical Masks Consumption in Italy Due to COVID-19 Pandemic

COVID-19's environmental impacts: Challenges and implications for the future

Strict measures have curbed the spread of COVID-19, but waste generation and movement limitations have had an unintended impact on the environment over the past 3 years (2020-2022). Many studies have summarized the observed and potential environmental impacts associated with COVID-19, however, only a few have quantified and compared the effects of these unintended environmental impacts; moreover, whether COVID-19 policy stringency had the same effects on the main environmental topic (i.e., CO2 emissions) across the 3 years remains unclear. To answer these questions, we conducted a systematic review of the recent literature and analyzed the main findings. We found that the positive environmental effects of COVID-19 have received more attention than the negative ones (50.6 % versus 35.7 %), especially in emissions reduction (34 % of total literature). Medical waste (14.5 %) received the highest attention among the negative impacts. Although global emission reduction, especially in terms of CO2, has received significant attention, the positive impacts were temporary and only detected in 2020. Strict COVID-19 policies had a more profound and significant effect on CO2 emissions in the aviation sector than in the power and industry sectors. For example, compared with 2019, international aviation related CO2 emissions dropped by 59 %, 49 %, and 25 % in 2020, 2021, and 2022, respectively, while industry related ones dropped by only 3.16 % in 2020. According to our developed evaluation matrix, medical wastes and their associated effects, including the persistent pollution caused by antibiotic resistance genes, heavy metals and microplastics, are the main challenges post the pandemic, especially in China and India, which may counteract the temporary environmental benefits of COVID-19. Overall, the presented results demonstrate methods to quantify the environmental effects of COVID-19 and provide directions for policymakers to develop measures to address the associated environmental issues in the post-COVID-19 world.

Post-Pandemic: Investigation of the Degradation of Various Commercial Masks in the Marine Environment

During COVID-19, personal protective equipment such as face masks was in urgent demand in the daily life. As the pandemic may have withdrawn from public attention, the disposal of face masks is a significant issue, especially plastic pollution. To address the degradation of the polymers in the marine environment, seven commercial masks were investigated via artificial weathering procedures in substitute ocean water. A suite of structural and chemical characterization techniques was employed, including scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), and contact angle goniometry, to probe the treatment impact on commercially available N95, surgical, polyurethane, polyester, nylon, silk, and cotton masks. This work provides insights into the comprehensive analysis of material degradation in nature and raises public awareness of environmental issues post-pandemic.

Nanotechnology in the COVID-19 era: Carbon-based nanomaterials as a promising solution

The Coronavirus Disease 2019 (COVID-19) pandemic has led to collaboration between nanotechnology scientists, industry stakeholders, and clinicians to develop solutions for diagnostics, prevention, and treatment of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) infections. Nanomaterials, including carbon-based materials (CBM) such as graphene and carbon nanotubes, have been studied for their potential in viral research. CBM unique effects on microorganisms, immune interaction, and sensitivity in diagnostics have made them a promising subject of SARS-CoV-2 research. This review discusses the interaction of CBM with SARS-CoV-2 and their applicability, including CBM physical and chemical properties, the known interactions between CBM and viral components, and the proposed prevention, treatment, and diagnostics uses.

Environmental footprints of disposable and reusable personal protective equipment ‒ a product life cycle approach for body coveralls

Body coveralls, often made of single-use plastics, are essential Personal Protective Equipment (PPE) and, along with masks, are widely used in healthcare facilities and public spaces in the wake of the recent COVID-19 pandemic. The widespread use of these body coveralls poses a significant threat to terrestrial and aquatic ecosystems, given their polluting nature and disposal frequency. Therefore, it is necessary to promote the adoption of alternatives that increase the safe reusability of PPE clothing and reduce environmental and health hazards. This study presents a comparative Cradle-to-Grave Life Cycle Assessment (LCA) of disposable and reusable PPE body coveralls from a product life cycle perspective. A comprehensive life cycle inventory and LCA framework specific to Indian conditions have been developed through this study. The LCA is performed as per standard protocols using SimaPro software under recipe 2016 (H) impact assessment method. Six midpoint impact categories viz. Global Warming Potential, Terrestrial Acidification, Freshwater Eutrophication, Terrestrial Ecotoxicity, Human Carcinogenic Toxicity, and Water Consumption are assessed, along with Cumulative Energy Demand. Results suggest that reusable PPE improves environmental and human health performance in all the impact categories except water consumption. Sensitivity analysis reveals that replacing conventional electricity with solar energy for PPE manufacturing and disposal will provide additional environmental benefits. The findings can help the medical textile industries, healthcare workers, and policymakers to make environmentally informed choices.

Smart waste management perspective of COVID-19 healthy personal protective materials in concrete for decorative landscape pavements and artificial rocks

This paper presents a new method for determining the effect of healthy personal protective material (HPPM) stripes, such as surgical masks, protective suits, and overhead and foot covers, on the durability and physicomechanical characteristics of concrete for use in architectural forms. Because of the current global epidemic caused by coronavirus (COVID-19), the use of HPPM, such as surgical masks, protective suits, and overhead and foot covers, has increased considerably. COVID-19's second and third waves are currently affecting various countries, necessitating the use of facemasks (FM). Consequently, millions of single FM have been discharged into the wild, washing up on beaches, floating beneath the seas, and ending up in hazardous locations. The effect of stripe fibers on the physicomechanical characteristics of concrete, such as the workability, Uniaxial Compressive Strength UCS, flexural strength, impact strength, spalling resistance, abrasion resistance, sorptivity, Water absorption Sw, porosity (ηe), water penetration, permeability, and economic and eco-friendly aspects, need to be determined. With a focus on HPPM, especially single-use facemasks, this study investigated an innovative way to incorporate pandemic waste into concrete structures. Scanning electron microscope and X-ray diffraction patterns were employed to analyze the microstructures and interfacial transition zones and to identify the elemental composition. The HPPM had a pore-blocking effect, which reduced the permeability and capillary porosity. Additionally, the best concentrations of HPPM, particularly of masks, were applied by volume at 0, 1, 1.5, 2.0, and 2.5%. The use of mixed fibers from different HPPMs increased the strength and overall performance of concrete samples. The tendency of growing strength began to disappear at approximately 2%. The results of this investigation showed that the stripe content had no effect on the compressive strength. However, the stripe is critical for determining the flexural strength of concrete. The UCS increased steadily between 1 and 1.5% before falling marginally at 2.5%, which indicates that incorporating HPPM into concrete had a significant impact on the UCS of the mixture. The addition of HPPM to the mixtures considerably modified the failure mode of concrete from brittle to ductile. Water absorption in hardened concrete is reduced when HPPM stripes and fibers were added separately in low-volume fractions to the concrete mixture. The concrete containing 2% HPPM fibers had the lowest water absorption and porosity percentage. The HPPM fibers were found to act as bridges across cracks, enhancing the transfer capability of the matrices. From a technological and environmental standpoint, this study found that using HPPM fibers in the production of concrete is viable.

Extending the Protection Ability and Life Cycle of Medical Masks through the Washing Process

The reuse of decontaminated disposable medical face masks can contribute to reducing the environmental burden of discarded masks. This research is focused on the effect of household and laboratory washing at 50 °C on the quality and functionality of the nonwoven structure of polypropylene medical masks by varying the washing procedure, bath composition, disinfectant agent, and number of washing cycles as a basis for reusability. The barrier properties of the medical mask were analyzed before and after the first and fifth washing cycle indirectly by measuring the contact angle of the liquid droplets with the front and back surface of the mask, further by measuring air permeability and determining antimicrobial resistance. Additional analysis included FTIR, pH of the material surface and aqueous extract, as well as the determination of residual substances-surfactants-in the aqueous extract of washed versus unwashed medical masks, while their aesthetic aspect was examined by measuring their spectral characteristics. The results showed that household washing had a stronger impact on the change of some functional properties, primarily air permeability, than laboratory washing. The addition of the disinfectant agent, didecyldimethylammonium chloride, contributes to the protective ability and supports the idea that washing of medical masks under controlled conditions can preserve barrier properties and enable reusability.

Face mask and medical waste generation in the City of Baguio, Philippines: its current management and GHG footprint

The daily use of facemask to prevent virus transmission increases the negative effect on the environment because of improper waste disposal. Due to the absence of baseline data, the impact of facemask and medical waste generation, as well as the community's management practice, should be studied to avoid further environmental degradation. In this study, we surveyed 384 respondents and conducted computational analysis to provide an overview of the household's facemask usage and ecological footprint in combating Covid-19. Results showed that most respondents (48.7%) use two facemasks per day. Thus, an estimated 417,834 facemasks are disposed daily, generating 3,585 kg/day of additional waste. The average medical waste of Covid-infected individuals is 3.29 kg per day per capita. This yields 22,438 kg. of CO2 eq., which could contribute to the global warming potential; however, there is also a potential recovery of 61.572 gigajoules of energy for power generation. Most respondents are aware of proper facemask waste management practices, but some lacks application regarding responsible waste disposal. Despite the contribution of facemask to the overall solid waste generation, the city's current management remains a challenge since disposable facemasks are potentially mixed with other types of waste from its storage, collection, and disposal.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10163-023-01601-2.

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

Mitigation of microfibers release from disposable masks - An analysis of structural properties

The use of disposable face masks increased rapidly among the general public to control the COVID-19 spread. Eventually, it increased the disposal of masks and their associated impacts on environmental pollution. Hence, this study aims to analyze the impact of nonwoven fabric structural parameters and weathering on the microfiber release characteristics. Spunbond polypropylene nonwoven with four different weights and meltblown nonwoven with two different weights were used in this study to analyze microfiber release at dry, and wet conditions to simulate improper disposal in the environment. Exposure to sunlight significantly increases the microfiber release from 35 to 50% for spunbond fabric and 56-89% for meltblown fabric. Weathering in sunlight structurally affected the tensile properties of the polypropylene fibers due to photodegradation. The study showed that each mask can produce 1.5 × 102 and 3.45 × 101 mg of microfiber/mask respectively in dry and wet states. In the case of structural parameters, a higher GSM (grams per square meter), abrasion resistance, bursting strength, and thickness showed a positive correlation with microfiber release in both fabrics. Significantly a higher microfiber release was reported with meltblown fabric than the spunbond for a given GSM. The presence of finer fibers and more fibers per unit area in meltblown fabric was noted as the main cause. Nonwoven fabric GSM and the number of fibers in a specific area showed a higher influence on microfiber release. Based on the mask consumption reported in the literature, India alone can produce around 4.27 × 102 tons of microfibers/week as an average of dry and wet conditions. The study suggests that the proper selection of physical parameters can significantly reduce the microfiber fiber release at all stages.