Performance of rGO/TiO2 Photocatalytic Membranes for Hydrogen Production

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Advancements in Nanoenabled Membrane Distillation for a Sustainable Water-Energy-Environment Nexus

The emergence of nano innovations in membrane distillation (MD) has garnered increasing scientific interest. This enables the exploration of state-of-the-art nano-enabled MD membranes with desirable properties, which significantly improve the efficiency and reliability of the MD process and open up opportunities for achieving a sustainable water-energy-environment (WEE) nexus. This comprehensive review provides broad coverage and in-depth analysis of recent innovations in nano-enabled MD membranes, focusing on their role in achieving desirable properties, such as strong liquid-repellence, high resistance to scaling, fouling, and wetting, as well as efficient self-heating and self-cleaning functionalities. The recent developments in nano-enhanced photothermal-catalytic applications for water-energy co-generation within a single MD system are also discussed. Furthermore, the bottlenecks are identified that impede the scale-up of nanoenhanced MD membranes and a future roadmap is proposed for their sustainable commercialiation. This holistic overview is expected to inspire future research and development efforts to fully harness the potential of nano-enabled MD membranes to achieve sustainable integration of water, energy, and the environment.

Design and fabrication of self-suspending aluminum-plastic/semiconductor photocatalyst devices for solar energy conversion

The design and synthesis of self-suspending photocatalyst device with easy recyclability is important for practical application. Here, this work utilizes aluminum-plastic package waste as raw material to prepare an aluminum-plastic supported TiO2 (AP-TiO2) photocatalyst device through 3D printing design and surface deposition method. A series of characterizations were carried out to explore the structure, morphology and performance of the AP-TiO2 device. Under UV light illumination, the AP-TiO2-50 efficiently degrade 93.6% tetracycline hydrochloride (THC) after 4 hr, which increases by 8.3% compared with that of TiO2 powder suspension system with the same catalyst amount. Based on it, AP-ZnO, AP-CdS, AP-g-C3N4 and AP-Pt-TiO2 are also fabricated, and applied in photocatalytic degradation and hydrogen evolution, which all exhibit higher photoactivities than powder suspension systems. This work provides a new avenue for the fabrication of advanced recyclable photocatalyst device. Moreover, the work offers a novel sight for the high-value utilization of aluminum-plastic package waste, which has positive implications for environmental protection.

Shedding light on the performance of magnetically recoverable TiO2/Fe3O4/rGO-5 photocatalyst. Degradation of S-metolachlor as case study

Recalcitrant contaminants are not usually removed in conventional wastewater treatment plants. Therefore, they are transferred to the water resources that receive treated wastewaters and their presence can cause health and environmental issues. Herbicides are among these compounds. In particular, S-metolachlor (MTLC) is specifically of high concern because its molecule incorporates a chlorine atom that contributes to its toxicity. For its removal, a magnetically recoverable photocatalyst, TiO₂/Fe₃O₄/rGO-5, was synthesised following a hydrothermal method. The performance of TiO₂/Fe₃O₄/rGO-5 has been experimentally assessed and compared to TiO₂ and TiO₂/rGO-5 catalysts. A characterisation of the materials properties was carried out including adsorption isotherms of MTLC that provided the maximum adsorption capacity of the materials (q_m), being 140.85 ± 5.14 mg g^-1 for TiO₂/Fe₃O₄/rGO-5. Furthermore, the ternary composite exhibited good recoverability from liquid media after four consecutive cycles thanks to its magnetic character (magnetic saturation of 13.85 emu g^-1). Photocatalytic degradation of MTLC started after a dark adsorption step following first order kinetics (0.0197 ± 1.2 × 10^-4 min^-1 for the degradation of 100 mg L^-1 of MTLC with 0.5 g L^-1 of TiO₂/Fe₃O₄/rGO-5) similar to the rate of appearance of chloride in solution; after total removal of the solubilized MTLC the chloride concentration in the solution continued increasing with zero-th order kinetics up to the value corresponding to the total MTLC concentration. This second step in the chloride formation was attributed to the degradation of adsorbed MTLC. Specific experiments in the presence of scavengers of reactive oxygen species (ROS) were carried out shedding light on the degradation mechanisms. It was concluded the predominant role of free hydroxyl radicals in the photocatalytic degradation in all the investigated materials, whereas the presence of rGO in the composite photocatalysts improved their electronic conductivity, enhancing the activity of superoxide radicals. The results of this work provide important information for further development of photocatalysis.

Photocatalytic nanocomposite membranes for environmental remediation

We report the design and one-pot synthesis of Ag-doped BiVO₄embedded in reduced graphene oxide (BiVO₄:Ag/rGO) nanocomposites via a hydrothermal processing route. The binary heterojunction photocatalysts exhibited high efficiency for visible light degradation of model dyes and were correspondingly used for the preparation of photocatalytic membranes using polyvinylidene fluoride (PVDF) or polyethylene glycol (PEG)-modified polyimide (PI), respectively. The surface and cross-section images combined with elemental mapping illustrated the effective distribution of the nanocomposites within the polymeric membranes. Photocatalytic degradation efficiencies of 61% and 70% were achieved after 5 h of visible light irradiation using BiVO₄:Ag/rGO@PVDF and BiVO₄:Ag/rGO@PI (PEG-modified) systems, respectively. The beneficial photocatalytic performance of the BiVO₄:Ag/rGO@PI (PEG-modified) membrane is explained by the higher hydrophilicity due to the PEG modification of the PI membrane. This work may provide a rational and effective strategy to fabricate highly efficient photocatalytic nanocomposite membranes with well-contacted interfaces for environmental purification.

Immobilised rGO/TiO2 Nanocomposite for Multi-Cycle Removal of Methylene Blue Dye from an Aqueous Medium

This work presents the immobilisation of titanium dioxide (TiO2) nanoparticles (NPs) and reduced graphene oxide (rGO)-TiO2 nanocomposite on glass sheets for photocatalytic degradation of methylene blue (MB) under different radiation sources such as ultraviolet and simulated solar radiation. The TiO2 NPs and rGO-TiO2 nanocomposite were synthesised through a simple hydrothermal method of titanium isopropoxide precursor followed by calcination treatment. Deposition of prepared photocatalysts was performed by spin-coating method. Additionally, ethylene glycol was mixed with the prepared TiO2 NPs and rGO-TiO2 nanocomposite to enhance film adhesion on the glass surface. The photocatalytic activity under ultraviolet and simulated solar irradiation was examined. Further, the influence of different water matrices (milli-Q, river, lake, and seawater) and reactive species (h+, •OH, and e−) on the photocatalytic efficiency of the immobilised rGO/TiO2 nanocomposite was careful assessed. MB dye photocatalytic degradation was found to increase with increasing irradiation time for both irradiation sources. The immobilisation of prepared photocatalysts is very convenient for environment applications, due to easy separation and reusability, and the investigated rGO/TiO2-coated glass sheets demonstrated high efficiency in removing MB dye from an aqueous medium during five consecutive cycles.

TiO2–Zeolite Metal Composites for Photocatalytic Degradation of Organic Pollutants in Water

Immobilization of photocatalysts in porous materials is an approach to significantly minimize the hazards of manipulation and recovery of nanoparticles. Inorganic materials, such as zeolites, are proposed as promising materials for photocatalyst immobilization mainly due to their photochemical stability. In this work, a green synthesis method is proposed to combine TiO2-based photocatalysts with commercial ZY zeolite. Moreover, a preliminary analysis of their performance as photocatalysts for the abatement of organic pollutants in waters was performed. Our results show that the physical mixture of TiO2 and zeolite maintains photocatalytic activity. Meanwhile, composites fabricated by doping TiO2–zeolite Y materials with silver and palladium nanoparticles do not contribute to improving the photocatalytic activity beyond that of TiO2.

Past, Present and Future of Membrane Technology in Spain

The following review aims at analyzing the contribution of Spanish researchers to membrane science and technology, with a historical compilation of the main milestones. We used a bibliometric analysis based on the Scopus database (1960–2020) dealing with 8707 documents covering the different disciplines and subject areas where membranes are involved. Furthermore, the information has been updated to the present moment of writing this manuscript in order to include the latest research lines and the different research groups currently active in Spain, which may lead the way to the development of the field in the coming years.

Reactors for Process Intensification: Recent Advances and Key Applications

Coupling industrial development and environmental protection is one of the most important challenges for the coming years [...].

Influence of QD photosensitizers in the photocatalytic production of hydrogen with biomimetic [FeFe]-hydrogenase. Comparative performance of CdSe and CdTe

Photocatalytic systems comprising a hydrogenase-type catalyst and CdX (X = S, Se, Te) chalcogenide quantum dot (QD) photosensitizers show extraordinary hydrogen production rates under visible light excitation. What remains unknown is the mechanism of energy conversion in these systems. Here, we have explored this question by comparing the performance of two QD sensitizers, CdSe and CdTe, in photocatalytic systems featuring aqueous suspensions of a [Fe₂ (μ-1,2-benzenedithiolate) CO₆] catalyst and an ascorbic acid sacrificial agent. Overall, the hydrogen production yield for CdSe-sensitized reactions QDs was found to be 13 times greater than that of CdTe counterparts. According to emission quenching experiments, an enhanced performance of CdSe sensitizers reflected a greater rate of electron transfer from the ascorbic acid (k_Asc). The observed difference in the QD-ascorbic acid charge transfer rates between the two QD materials was consistent with respective driving forces for these systems.

Prospects of Synthesized Magnetic TiO2-Based Membranes for Wastewater Treatment: A Review

Global accessibility to clean water has stressed the need to develop advanced technologies for the removal of toxic organic and inorganic pollutants and pathogens from wastewater to meet stringent discharge water quality limits. Conventionally, the high separation efficiencies, relative low costs, small footprint, and ease of operation associated with integrated photocatalytic-membrane (IPM) technologies are gaining an all-inclusive attention. Conversely, photocatalysis and membrane technologies face some degree of setbacks, which limit their worldwide application in wastewater settings for the treatment of emerging contaminants. Therefore, this review elucidated titanium dioxide (TiO₂), based on its unique properties (low cost, non-toxicity, biocompatibility, and high chemical stability), to have great potential in engineering photocatalytic-based membranes for reclamation of wastewater for re-use. The environmental pathway of TiO₂ nanoparticles, membranes and configuration types, modification process, characteristics, and applications of IPMs in water settings are discussed. Future research and prospects of magnetized TiO₂-based membrane technology is highlighted as a viable water purification technology to mitigate fouling in the membrane process and photocatalyst recoverability. In addition, exploring life cycle assessment research would also aid in utilizing the concept and pressing for large-scale application of this technology.

MXene potassium titanate nanowire/sulfonated polyether ether ketone (SPEEK) hybrid composite proton exchange membrane for photocatalytic water splitting

A cross-linked sulfonated polyether ether ketone (C-SPEEK) was incorporated with MXene/potassium titanate nanowire (MKT-NW) as a filler and applied as a proton exchange membrane for photocatalytic water splitting. The prepared hybrid composite PEM had proton conductivity of 0.0097 S cm⁻¹ at room temperature with an ion exchange capacity of 1.88 meq g⁻¹. The hybrid composite proton exchange membrane is a reactive membrane which was able to generate hydrogen gas under UV light irradiation. The efficiency of hydrogen gas production was 0.185066 μmol within 5 h for 12% wt of MKT-NW loading. The results indicated that the MKT-NW/C-SPEEK membrane is a promising candidate for ion exchange with hydrogen gas evolution in photocatalytic water splitting and could be applied as a renewable source of energy to use in various fields of applications.

A cross-linked sulfonated polyether ether ketone (C-SPEEK) was incorporated with MXene/potassium titanate nanowire (MKT-NW) as a filler and applied as a proton exchange membrane for photocatalytic water splitting.

Enhanced Selective Hydrogen Permeation through Graphdiyne Membrane: A Theoretical Study

Graphdiyne (GDY), with uniform pores and atomic thickness, is attracting widespread attention for application in H2 separation in recent years. However, the challenge lies in the rational design of GDYs for fast and selective H2 permeation. By MD and DFT calculations, several flexible GDYs were constructed to investigate the permeation properties of four pure gas (H2, N2, CO2, and CH4) and three equimolar binary mixtures (H2/N2, H2/CO2, and H2/CH4) in this study. When the pore size is smaller than 2.1 Å, the GDYs acted as an exceptional filter for H2 with an approximately infinite H2 selectivity. Beyond the size-sieving effect, in the separation process of binary mixtures, the blocking effect arising from the strong gas-membrane interaction was proven to greatly impede H2 permeation. After understanding the mechanism, the H2 permeance of the mixtures of H2/CO2 was further increased to 2.84 × 105 GPU by reducing the blocking effect with the addition of a tiny amount of surface charges, without sacrificing the selectivity. This theoretical study provides an additional atomic understanding of H2 permeation crossing GDYs, indicating that the GDY membrane could be a potential candidate for H2 purification.